| /* |
| * Copyright (c) 2016 Nest Labs, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this program; if not, write to the Free |
| * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * Description: |
| * This file defines the x-loader configuration settings for the |
| * Nest Learning Thermostat board. |
| * |
| * SDRAM Controller (SDRC): |
| * - Samsung K4X51163PI-FCG6 64 MiB DDR SDRAM |
| * |
| * General Purpose Memory Controller (GPMC): |
| * - Micron MT29F2G16ABDHC-ET 256 MiB SLC NAND Flash (Development) |
| * - Micron MT29F2G16ABBEAH4 256 MiB SLC NAND Flash (Non-development) |
| * - Samsung K9F4G08U0C 512 MiB SLC NAND Flash (Development) |
| * - SMSC LAN9220 10/100 Mbit Ethernet MAC and PHY (Development) |
| * |
| * Multimedia Card (MMC) Interface: |
| * - Molex 500998-0900 Secure Digital (SD) Connector |
| * - TI WL1270 Wireless LAN (WLAN) Module |
| * |
| * Display Subsystem (DSS): |
| * - Samsung LMS350DF03 HVGA (320 x 480) LCM (Development and Prototype) |
| * - Tianma TM025ZDZ01 (320 x 320) LCM (Production) |
| * |
| * Camera Image Signal Processor: |
| * - Unused |
| * |
| * UART Controller: |
| * - Channel 1: |
| * * Head Unit Serial Console |
| * |
| * - Channel 2: |
| * * ZigBee Wireless Module |
| * |
| * Multichannel Buffered Serial Port (McBSP): |
| * - Channel 1: |
| * - Channel 2: |
| * - Channel 3: |
| * - Channel 4: |
| * - Channel 5: |
| * |
| * Multichannel Serial Peripheral Interface (McSPI): |
| * - Channel 1: |
| * - Channel 2: |
| * - Channel 3: |
| * |
| * GPIO Controller: |
| * - Backplate Detect |
| * - ZigBee |
| */ |
| |
| #ifndef __DIAMOND_USB_LOADER_CONFIG_H |
| #define __DIAMOND_USB_LOADER_CONFIG_H |
| |
| #include "diamond.h" |
| |
| #define CONFIG_USB 1 |
| |
| #endif /* __DIAMOND_USB_LOADER_CONFIG_H */ |
| |
