blob: 33af09b0ef891bda83af4a90431f2c9333c273a0 [file] [log] [blame] [edit]
dbusdatadir=$(datadir)/dbus-1
legacydbusdatadir=$(sysconfdir)/dbus-1
dbus_daemon_execdir = $(DBUS_DAEMONDIR)
DBUS_BUS_LIBS = \
$(XML_LIBS) \
$(SELINUX_LIBS) \
$(APPARMOR_LIBS) \
$(THREAD_LIBS) \
$(ADT_LIBS) \
$(NETWORK_libs) \
$(NULL)
DBUS_LAUNCHER_LIBS = \
$(XML_LIBS) \
$(THREAD_LIBS) \
$(NETWORK_libs) \
$(NULL)
AM_CPPFLAGS = \
-I$(top_srcdir) \
$(DBUS_STATIC_BUILD_CPPFLAGS) \
$(XML_CFLAGS) \
$(APPARMOR_CFLAGS) \
-DDBUS_SYSTEM_CONFIG_FILE=\""$(dbusdatadir)/system.conf"\" \
-DDBUS_COMPILATION \
$(NULL)
# if assertions are enabled, improve backtraces
AM_LDFLAGS = @R_DYNAMIC_LDFLAG@
EFENCE=
CONFIG_IN_FILES= \
session.conf.in \
system.conf.in \
legacy-config/session.conf.in \
legacy-config/system.conf.in \
org.freedesktop.dbus-session.plist.in \
example-system-enable-stats.conf.in \
example-session-disable-stats.conf.in \
$(NULL)
dbusdata_DATA = session.conf
legacydbusdata_DATA = legacy-config/session.conf
if DBUS_UNIX
dbusdata_DATA += system.conf
legacydbusdata_DATA += legacy-config/system.conf
endif
examplesdir = ${docdir}/examples
examples_DATA = \
example-system-enable-stats.conf \
example-session-disable-stats.conf \
$(NULL)
if DBUS_ENABLE_LAUNCHD
agentdir=$(LAUNCHD_AGENT_DIR)
agent_DATA=org.freedesktop.dbus-session.plist
endif
XML_SOURCES=config-loader-expat.c
if DBUS_BUS_ENABLE_KQUEUE
DIR_WATCH_SOURCE=dir-watch-kqueue.c
else
if DBUS_BUS_ENABLE_INOTIFY
DIR_WATCH_SOURCE=dir-watch-inotify.c
else
DIR_WATCH_SOURCE=dir-watch-default.c
endif
endif
BUS_SOURCES= \
activation.c \
activation.h \
activation-exit-codes.h \
apparmor.c \
apparmor.h \
audit.c \
audit.h \
bus.c \
bus.h \
config-parser.c \
config-parser.h \
config-parser-common.c \
config-parser-common.h \
connection.c \
connection.h \
desktop-file.c \
desktop-file.h \
$(DIR_WATCH_SOURCE) \
dir-watch.h \
dispatch.c \
dispatch.h \
driver.c \
driver.h \
expirelist.c \
expirelist.h \
policy.c \
policy.h \
selinux.h \
selinux.c \
services.c \
services.h \
signals.c \
signals.h \
stats.c \
stats.h \
test.c \
test.h \
utils.c \
utils.h \
$(XML_SOURCES)
dbus_daemon_SOURCES= \
$(BUS_SOURCES) \
main.c
dbus_daemon_LDADD= \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(EFENCE) \
$(DBUS_BUS_LIBS)
LAUNCH_HELPER_SOURCES= \
$(XML_SOURCES) \
config-parser-common.c \
config-parser-common.h \
config-parser-trivial.c \
config-parser-trivial.h \
desktop-file.c \
desktop-file.h \
utils.c \
utils.h \
activation-exit-codes.h \
activation-helper.h \
activation-helper.c
## This is the installed launch helper with the setuid checks
dbus_daemon_launch_helper_SOURCES= \
activation-helper-bin.c \
$(LAUNCH_HELPER_SOURCES)
dbus_daemon_launch_helper_LDADD= \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_LAUNCHER_LIBS)
## we build another binary so we can do the launch testing without root privs.
## DO NOT INSTALL THIS FILE
dbus_daemon_launch_helper_test_SOURCES= \
activation-helper-bin.c \
$(LAUNCH_HELPER_SOURCES)
dbus_daemon_launch_helper_test_LDADD= \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_LAUNCHER_LIBS)
dbus_daemon_launch_helper_test_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DACTIVATION_LAUNCHER_TEST
## we build yet another binary so we can do the OOM tests
## DO NOT INSTALL THIS FILE
test_bus_launch_helper_SOURCES= \
test-launch-helper.c \
$(LAUNCH_HELPER_SOURCES)
test_bus_launch_helper_LDADD= \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_LAUNCHER_LIBS)
$(NULL)
test_bus_launch_helper_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DACTIVATION_LAUNCHER_TEST \
-DACTIVATION_LAUNCHER_DO_OOM
noinst_PROGRAMS =
dbus_daemon_exec_PROGRAMS = dbus-daemon
if DBUS_UNIX
libexec_PROGRAMS = dbus-daemon-launch-helper
endif DBUS_UNIX
## Note that TESTS has special meaning (stuff to use in make check).
## We don't actually want to run any of these tests until test/ has been
## compiled, so we don't put them in TESTS here; we run them in test/
## instead.
if DBUS_ENABLE_EMBEDDED_TESTS
## we use noinst_PROGRAMS not check_PROGRAMS so that we build
## even when not doing "make check"
# run as a test by test/Makefile.am
noinst_PROGRAMS += test-bus
if DBUS_UNIX
# run as a test by test/Makefile.am
noinst_PROGRAMS += test-bus-launch-helper test-bus-system
# this is used by the tests but is not,itself, a test
noinst_PROGRAMS += dbus-daemon-launch-helper-test
endif DBUS_UNIX
endif DBUS_ENABLE_EMBEDDED_TESTS
test_bus_system_SOURCES= \
$(XML_SOURCES) \
config-parser-common.c \
config-parser-common.h \
config-parser-trivial.c \
config-parser-trivial.h \
utils.c \
utils.h \
test-system.c
test_bus_system_LDADD = \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_BUS_LIBS) \
$(NULL)
test_bus_SOURCES= \
$(BUS_SOURCES) \
test-main.c
test_bus_LDADD = \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_BUS_LIBS) \
$(NULL)
## mop up the gcov files
clean-local:
/bin/rm *.bb *.bbg *.da *.gcov || true
install-data-hook:
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/session.d
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/services
if DBUS_UNIX
$(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/system.d
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/system-services
endif
if HAVE_SYSTEMD
# Install dbus.socket as default implementation of a D-Bus stack.
# Deliberately not using $(LN_S) here: ln -fs is not universally portable,
# but neither is systemd, so it's OK to assume here that ln complies with SUS.
$(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants
ln -fs ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants/dbus.socket
# Unconditionally enable D-Bus on systemd installations
$(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants
ln -fs ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket
$(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants
ln -fs ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service
endif
if DBUS_ENABLE_USER_SESSION
$(mkinstalldirs) $(DESTDIR)$(systemduserunitdir)/sockets.target.wants
ln -fs ../dbus.socket $(DESTDIR)$(systemduserunitdir)/sockets.target.wants/dbus.socket
endif
if DBUS_UNIX
install-exec-hook:
if test `id -u` -eq 0; then \
chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
else \
echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
fi
endif
#### Init scripts fun
SCRIPT_IN_FILES=messagebus.in \
messagebus-config.in \
rc.messagebus.in
## Red Hat start
if DBUS_INIT_SCRIPTS_RED_HAT
initddir=$(sysconfdir)/rc.d/init.d
initd_SCRIPTS= \
messagebus
endif
## Red Hat end
## Slackware start
if DBUS_INIT_SCRIPTS_SLACKWARE
initddir=$(sysconfdir)/rc.d/
initd_SCRIPTS= \
rc.messagebus
endif
## Slackware end
## Cygwin start
if DBUS_INIT_SCRIPTS_CYGWIN
bin_SCRIPTS= \
messagebus-config
endif
## Cygwin end
if HAVE_SYSTEMD
SCRIPT_IN_FILES += \
dbus.service.in \
dbus.socket.in \
systemd-user/dbus.service.in \
systemd-user/dbus.socket.in \
$(NULL)
systemdsystemunit_DATA = \
dbus.service \
dbus.socket
endif
if DBUS_ENABLE_USER_SESSION
systemduserunit_DATA = \
systemd-user/dbus.service \
systemd-user/dbus.socket \
$(NULL)
endif
#### Extra dist
EXTRA_DIST=$(CONFIG_IN_FILES) $(SCRIPT_IN_FILES)