/*
 * Copyright (C) 2013 Ambarella,Inc. - http://www.ambarella.com/
 * Author: Cao Rongrong <rrcao@ambarella.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/include/ "skeleton.dtsi"

/ {
	compatible = "ambarella,s2e";
	interrupt-parent = <&intc>;

	aliases {
		serial0 = &uart0;
		serial1 = &uart1;
		serial2 = &uart2;
		serial3 = &uart3;
		nand = &nand0;
		sd0 = &sdmmc0;
		sd1 = &sdmmc1;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		spi0 = &spi0;
		spi1 = &spi1;
		ethernet0 = &mac0;
	};

	/* the memory node will be overwritten in Amboot,
	 * here is just the default value. */
	memory {
		device_type = "memory";
		reg = <0x00200000 0x07e00000>; /* 126M */
	};

	chosen {
		linux,stdout-path = &uart0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		amb,core-div = <1>;
		clock-latency = <100000>;
		/* the highest frequency is gotten in runtime */
		cpufreq_tbl = < /*core_clk	cortex_clk*/
				24000		24000
				108000		504000>;
		cpu@a00 {
			device_type = "cpu";
			compatible = "arm,cortex-a9";
			reg = <0xa00>;
		};
		cpu@a01 {
			device_type = "cpu";
			compatible = "arm,cortex-a9";
			reg = <0xa01>;
		};
	};

	apb@70000000 {	/* APB */
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x70000000 0x01000000>;
		ranges;

		timer7: timer@7000b064 {
			compatible = "ambarella,clock-source";
			reg = <0x7000b064 0x10 0x7000b030 0x4>;
			interrupts = <62 0x1>;
			ctrl-offset = <24>; /* bit offset in timer-ctrl reg */
		};

		timer8: timer@7000b074 {
			compatible = "ambarella,clock-event";
			reg = <0x7000b074 0x10 0x7000b030 0x4>;
			interrupts = <63 0x1>;
			ctrl-offset = <28>; /* bit offset in timer-ctrl reg */
		};

		/* timer6 and timer5 */
		local_timer: timer@7000b054 {
			compatible = "ambarella,local-clock-event";
			reg = <0x7000b054 0x10 0x7000b030 0x4 0x7000b044 0x10 0x7000b030 0x4>;
			interrupts = <61 0x1 60 0x1>;
			ctrl-offset = <20 16>; /* bit offset in timer-ctrl reg */
		};

		uart0: uart@70005000 {
			compatible = "ambarella,uart";
			reg = <0x70005000 0x100>;
			interrupts = <9 0x04>;
			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pins>;
			status = "ok";
			/* amb,tx-fifo-fix; */
		};

		uart1: uart@7001f000 {
			compatible = "ambarella,uart";
			reg = <0x7001f000 0x100>;
			interrupts = <25 0x04>;
			pinctrl-names = "default";
			pinctrl-0 = <&uart1_pins>;
			status = "ok";
			amb,msr-used;	/* use Modem Status Register */
			amb,txdma-used;
			amb,rxdma-used;
			/* amb,tx-fifo-fix; */
		};

		uart2: uart@70014000 {
			compatible = "ambarella,uart";
			reg = <0x70014000 0x100>;
			interrupts = <91 0x04>;
			status = "disabled";
			amb,msr-used;	/* use Modem Status Register */
			/* amb,tx-fifo-fix; */
		};

		uart3: uart@70015000 {
			compatible = "ambarella,uart";
			reg = <0x70015000 0x100>;
			interrupts = <92 0x04>;
			status = "disabled";
			amb,msr-used;	/* use Modem Status Register */
			/* amb,tx-fifo-fix; */
		};

		i2c0: i2c@70003000 {
			compatible = "ambarella,i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70003000 0x1000>;
			interrupts = <19 0x04>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins>;
			clock-frequency = <100000>;
			amb,i2c-class = <0x81>;
			status = "disabled";
	        };

		i2c1: i2c@70007000 {
			compatible = "ambarella,i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70007000 0x1000>;
			interrupts = <36 0x04>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2c1_pins>;
			clock-frequency = <100000>;
			amb,i2c-class = <0x08>;
			status = "disabled";
	        };

		i2c2: i2c@70013000 {
			compatible = "ambarella,i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70013000 0x1000>;
			interrupts = <90 0x04>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2c2_pins>;
			clock-frequency = <100000>;
			amb,i2c-class = <0x81>;
			status = "disabled";
	        };

		spi0: spi@70002000 {
			compatible = "ambarella,spi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70002000 0x1000>;
			interrupts = <20 0x4>;
			pinctrl-names = "default";
			pinctrl-0 = <&spi0_pins>;
			amb,clk-freq = <60000000>;
			amb,msb-first-only;
		};

		spi_slave@7001e000 {
			compatible = "ambarella,spi-slave";
			reg = <0x7001e000 0x1000>;
			interrupts = <26 0x4>;
			pinctrl-names = "default";
			pinctrl-0 = <&spi_slave_pins>;
			status = "disabled";
		};

		adc@7000d000 {
			compatible = "ambarella,adc";
			reg = <0x7000d000 0x1000>;
			interrupts = <34 0x4>;
			clock-frequency = <3000000>;
		};

		ir@70006000 {
			compatible = "ambarella,ir";
			reg = <0x70006000 0x1000>;
			interrupts = <22 0x4>;
			pinctrl-names = "default";
			pinctrl-0 = <&ir_pins>;
		};

		wdt@7000c000 {
			compatible = "ambarella,wdt";
			reg = <0x7000c000 0x1000>;
			/* interrupts = <21 0x4>; */
			timeout-sec = <15>;
		};

		rtc@7000d000 {
			compatible = "ambarella,rtc";
			reg = <0x7000d000 0x1000>;
			rtc,wakeup;
		};

		pwm: pwm@70004000 {
			compatible = "ambarella,pwm";
			reg = <0x70004000 0x1000 0x70008000 0x10>;
			#pwm-cells = <3>;
		};

		pinctrl: pinctrl@70009000 {
			compatible = "ambarella,pinctrl", "simple-bus";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70009000 0x1000>,
			      <0x7000a000 0x1000>,
			      <0x7000e000 0x1000>,
			      <0x70010000 0x1000>,
			      <0x70011000 0x1000>;
			reg-names = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
			#gpio-range-cells = <3>;

			gpio: gpio@0 {
				compatible = "ambarella,gpio";
				/* gpio interrupts to vic */
				interrupts = <10 0x04>,
					     <11 0x04>,
					     <30 0x04>,
					     <29 0x04>,
					     <48 0x04>;
				gpio-controller;
				#gpio-cells = <2>;
				gpio-ranges = <&pinctrl 0 0 160>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			uart0_pins: uart0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x100e 0x100f>;
			};

			uart1_pins: uart1@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1034 0x1035>,
						 /* virtual pins, just for configuration purpose */
						 <0x1021 0x0022 0x1032 0x1033>;
			};

			uart1_4pins: uart1_4pins@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1032 0x1033 0x1034 0x1035>,
						 /* virtual pins, just for configuration purpose */
						 <0x1021 0x0022>;
			};

			uart2_pins: uart2@0 {
				reg = <0>;
				amb,pinmux-ids = <0x100a 0x1012>;
			};

			uart3_pins: uart3@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1013 0x1014>;
			};

			nand0_pins: nand0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1027>; /* just WP is shared with GPIO */
			};

			sdmmc0_pins: sdmmc0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1041 0x1042 0x1043 0x1044>;
			};

			sdmmc1_pins_1bit: sdmmc1@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1045 0x1046 0x1047
						  0x104b 0x104c>;
			};

			sdmmc1_pins_4bit: sdmmc1@1 {
				reg = <1>;
				amb,pinmux-ids = <0x1045 0x1046 0x1047 0x1048
						  0x1049 0x104a 0x104b 0x104c>;
			};

			eth_pins: eth0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1008 0x101c 0x101d 0x101e 0x101f
						  0x1028 0x1029 0x102a 0x102b 0x102c
						  0x102f 0x1030 0x1052 0x1053 0x105c
						  0x105d 0x105e 0x105f 0x107c 0x107d
						  0x107e 0x107f 0x1080 0x1088 0x1089
						  0x108a>;
			};

			i2c0_pins: i2c0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1000 0x1001>;
			};

			i2c1_pins: i2c1@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1056 0x1057>;
			};

			i2c2_pins: i2c2@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1024 0x1025>,
						 /* virtual pins, just for configuration purpose */
						 <0x1011>;
			};

			ir_pins: ir0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1023>;
			};

			i2s0_pins: i2s0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x104d 0x104e 0x104f 0x1050 0x1051>,
						 /* virtual pins, just for configuration purpose.*/
						 <0x0064 0x0065>;
			};

			usb_host_pins: uhc0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1007 0x1009>,
						 /* virtual pins, just for configuration purpose.
						   EHCI_PRT_PWR and APP_PRT_OVCURR share the hw
						   mode with SPI enable pin. */
						 <0x1060 0x1061>;
			};

			pwm0_pins: pwm0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x102d>;
			};

			pwm1_pins: pwm1@0 {
				reg = <0>;
				amb,pinmux-ids = <0x102e>;
			};

			pwm2_pins: pwm2@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1032>,
						/* virtual pins, just for
						   configuration purpose.*/
						 <0x0021 0x0022>;
			};

			pwm3_pins: pwm3@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1033>,
						/* virtual pins, just for
						   configuration purpose.
						   <0x0022>: kernel may throw out error,
						   			ignore it.*/
						 <0x0022 0x0023>;
			};

			pwmVD_pins: pwmVD@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1010>;
			};

			spi0_pins: spi0@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1002 0x1003 0x1004>;
			};

			spi1_pins: spi1@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1058 0x1059 0x105A>;
			};

			spi_slave_pins: spi_slave@0 {
				reg = <0>;
				amb,pinmux-ids = <0x1032 0x1033 0x1034 0x1035>,
					/* virtual pins, just for
					   configuration purpose.*/
					<0x0021 0x1022>;
			};
		};
	};

	ahb@60000000 {	/* AHB */
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x60000000 0x01000000>;
		ranges;

		intc: interrupt-controller@60003000 {
			compatible = "ambarella,vic";
			interrupt-controller;
			#interrupt-cells = <2>;
			reg = <0x60003000 0x1000>,
			      <0x60010000 0x1000>,
			      <0x6001c000 0x1000>;
		};

		dma: dma@60005000 {
			compatible = "ambarella,dma";
			reg = <0x60005000 0x1000>;
			interrupts = <15 0x4>;
			#dma-cells = <2>;
			dma-channels = <8>;
			dma-requests = <8>;
			dma-trans-type = <1 1 1 1 1 1 1 1>; /* 0-memcpy ,1-slave*/
			amb,copy-align = <0>;
			/* support pause/resume/stop */
			amb,support-prs;
		};

		nand0: nand@60001000 {
			compatible = "ambarella,nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x60001000 0x1000>, /* fio reg address */
			      <0x60012000 0x1000>, /* fdma reg address */
			      <0x60000000 0x4>;    /* fifo base */
			interrupts = <16 0x04>,	/* fio_cmd_irq */
				     <17 0x04>,	/* fio_dma_irq */
				     <33 0x04>;	/* fdma_irq */
			pinctrl-names = "default";
			pinctrl-0 = <&nand0_pins>;
			nand-on-flash-bbt;
			amb,enable-wp;
			/* amb,soft-ecc = <1>; */
		};

		spinor0: spinor@6000d000 {
			compatible = "ambarella,spinor";
			reg = <0x6000d000 0x2ff>, /* spi nor controller */
			      <0x60005300 0x20>;  /* dma reg */
			status = "disabled";
		};

		spi1: spi@6001f000 {
			compatible = "ambarella,spi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x6001f000 0x1000>;
			interrupts = <53 0x4>;
			pinctrl-names = "default";
			pinctrl-0 = <&spi1_pins>;
			amb,clk-freq = <54000000>;
			status = "disabled";
		};

		i2s0: i2s@6000a000 {
			compatible = "ambarella,i2s";
			reg = <0x6000a000 0x1000>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2s0_pins>;
			amb,i2s-channels = <2>;
			amb,default-mclk = <12288000>;
			dmas = <&dma 2 1>,
				   <&dma 1 1>;
			dma-names = "tx", "rx";
		};

		udc@60006000 {
			compatible = "ambarella,udc";
			reg = <0x60006000 0x2000 0x70170088 0x4>;
			interrupts = <4 0x04>;
			amb,usbphy = <&usbphy>;
		};

		ehci@60018000 {
			compatible = "ambarella,ehci";
			reg = <0x60018000 0x1000>;
			interrupts = <73 0x04>;
			amb,usbphy = <&usbphy>;
		};

		ohci@60019000 {
			compatible = "ambarella,ohci";
			reg = <0x60019000 0x1000>;
			interrupts = <89 0x04>;
			amb,usbphy = <&usbphy>;
		};

		sdmmc0: sdmmc0@60002000 {
			compatible = "ambarella,sdmmc";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x60002000 0x1000>,
			      <0x60001000 0x80>, /* fio reg address */
			      <0x70170340 0x8>;
			interrupts = <18 0x4>;
			amb,clk-name = "gclk_sd";
			amb,wait-tmo = <10000>; /* in millisecond */
			amb,switch_vol_tmo = <20>;
			amb,max-blk-size = <524288>; /* valid value: 4K<<n */
			amb,auto-tuning;
			amb,phy-type = <0>;/*0:rct phy, 1: sd controller phy, 2: for s2e*/
			amb,phy-timing = <0x00000001 0x04070000 0x00000000>,
					 <0x000000a4 0x00000005 0x00001111>,
					 <0x00000040 0x00000001 0x00001111>;
			pinctrl-names = "default";
			pinctrl-0 = <&sdmmc0_pins>;

			slot@0 {
				reg = <0>;
				global-id = <0>;
				max-frequency = <50000000>;
				bus-width = <8>;
				amb,caps-adma;
				cap-sdio-irq;
			};
		};

		sdmmc1: sdmmc1@6000c000 {
			compatible = "ambarella,sdmmc";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x6000c000 0x1000>,
			      <0x60001000 0x80>, /* fio reg address */
			      <0x701701d0 0x4>;
			interrupts = <52 0x4>;
			amb,clk-name = "gclk_sdio";
			amb,wait-tmo = <10000>; /* in millisecond */
			amb,switch_vol_tmo = <20>;
			amb,max-blk-size = <524288>; /* valid value: 4K<<n */
			amb,auto-tuning;
			amb,phy-type = <2>;/*0:rct phy, 1: sd controller phy, 2: for s2e*/
			amb,phy-timing = <0x00000001 0x1c1f1c1f 0x00000000>,
					 <0x00000080 0x1c1f1c1f 0x00e0e000>;
			pinctrl-names = "default";
			pinctrl-0 = <&sdmmc1_pins_4bit>;

			slot@0 {
				reg = <0>;
				global-id = <1>;
				max-frequency = <50000000>;
				bus-width = <4>;
				amb,caps-adma;
				cap-sdio-irq;
			};
		};

		mac0: ethernet@6000e000 {
			compatible = "ambarella,eth";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x6000e000 0x2000>;
			interrupts = <27 0x4>;
			amb,support-gmii;
			amb,tx-ring-size = <64>;
			amb,rx-ring-size = <64>;
			amb,ipc-rx;
			pinctrl-names = "default";
			pinctrl-0 = <&eth_pins>;
		};
	};

	axi@f0000000 {	/* AXI */
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xf0000000 0x00030000>;
		ranges;

		crypto@f0020000 {
			compatible = "ambarella,crypto";
			reg = <0xf0020000 0x8000>;
			interrupts = <44 0x1>, <45 0x1>, <47 0x1>, <88 0x1>;
			interrupt-names = "aes-irq", "des-irq", "md5-irq", "sha1-irq";
			amb,cap-md5-sha1;
			amb,data-swap;
			amb,reg-64bit;
		};
		l2-cache@f0002000 {
			compatible = "arm,pl310-cache";
			reg = <0xf0002000 0x1000>;
			cache-unified;
			cache-level = <2>;
			arm,tag_latency = <3 3 3>;
			arm,data_latency = <3 3 3>;
		};
	};

	rct@70170000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x70170000 0x1000>;
		ranges;

		usbphy: usbphy@70170050 {
			compatible = "ambarella,usbphy";
			reg = <0x70170050 0x4 0x6001b00c 0x4 0x70170088 0x4>;
			amb,host-phy-num = <1>;
		};
	};

	iav {
		compatible = "ambarella,iav";
	};

	bogus_bus {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		dummycodec: codec@0 {
			compatible = "ambarella,dummycodec";
		};
	};
};