/* fuc microcode for nvc0 PGRAPH/GPC
 *
 * Copyright 2011 Red Hat Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Authors: Ben Skeggs
 */

/* To build:
 *    m4 gpcnvc0.fuc | envyas -a -w -m fuc -V fuc3 -o gpcnvc0.fuc.h
 */

/* TODO
 * - bracket certain functions with scratch writes, useful for debugging
 * - watchdog timer around ctx operations
 */

.section #nvc0_grgpc_data
include(`nvc0.fuc')
gpc_id:			.b32 0
gpc_mmio_list_head:	.b32 0
gpc_mmio_list_tail:	.b32 0

tpc_count:		.b32 0
tpc_mask:		.b32 0
tpc_mmio_list_head:	.b32 0
tpc_mmio_list_tail:	.b32 0

cmd_queue:		queue_init

// chipset descriptions
chipsets:
.b8  0xc0 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc0_tpc_mmio_tail
.b8  0xc1 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc1_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc1_tpc_mmio_tail
.b8  0xc3 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc3_tpc_mmio_tail
.b8  0xc4 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc3_tpc_mmio_tail
.b8  0xc8 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc0_tpc_mmio_tail
.b8  0xce 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvc3_tpc_mmio_tail
.b8  0xcf 0 0 0
.b16 #nvc0_gpc_mmio_head
.b16 #nvc0_gpc_mmio_tail
.b16 #nvc0_tpc_mmio_head
.b16 #nvcf_tpc_mmio_tail
.b8  0xd9 0 0 0
.b16 #nvd9_gpc_mmio_head
.b16 #nvd9_gpc_mmio_tail
.b16 #nvd9_tpc_mmio_head
.b16 #nvd9_tpc_mmio_tail
.b8  0xd7 0 0 0
.b16 #nvd9_gpc_mmio_head
.b16 #nvd9_gpc_mmio_tail
.b16 #nvd9_tpc_mmio_head
.b16 #nvd9_tpc_mmio_tail
.b8  0 0 0 0

// GPC mmio lists
nvc0_gpc_mmio_head:
mmctx_data(0x000380, 1)
mmctx_data(0x000400, 6)
mmctx_data(0x000450, 9)
mmctx_data(0x000600, 1)
mmctx_data(0x000684, 1)
mmctx_data(0x000700, 5)
mmctx_data(0x000800, 1)
mmctx_data(0x000808, 3)
mmctx_data(0x000828, 1)
mmctx_data(0x000830, 1)
mmctx_data(0x0008d8, 1)
mmctx_data(0x0008e0, 1)
mmctx_data(0x0008e8, 6)
mmctx_data(0x00091c, 1)
mmctx_data(0x000924, 3)
mmctx_data(0x000b00, 1)
mmctx_data(0x000b08, 6)
mmctx_data(0x000bb8, 1)
mmctx_data(0x000c08, 1)
mmctx_data(0x000c10, 8)
mmctx_data(0x000c80, 1)
mmctx_data(0x000c8c, 1)
mmctx_data(0x001000, 3)
mmctx_data(0x001014, 1)
nvc0_gpc_mmio_tail:
mmctx_data(0x000c6c, 1);
nvc1_gpc_mmio_tail:

nvd9_gpc_mmio_head:
mmctx_data(0x000380, 1)
mmctx_data(0x000400, 2)
mmctx_data(0x00040c, 3)
mmctx_data(0x000450, 9)
mmctx_data(0x000600, 1)
mmctx_data(0x000684, 1)
mmctx_data(0x000700, 5)
mmctx_data(0x000800, 1)
mmctx_data(0x000808, 3)
mmctx_data(0x000828, 1)
mmctx_data(0x000830, 1)
mmctx_data(0x0008d8, 1)
mmctx_data(0x0008e0, 1)
mmctx_data(0x0008e8, 6)
mmctx_data(0x00091c, 1)
mmctx_data(0x000924, 3)
mmctx_data(0x000b00, 1)
mmctx_data(0x000b08, 6)
mmctx_data(0x000bb8, 1)
mmctx_data(0x000c08, 1)
mmctx_data(0x000c10, 8)
mmctx_data(0x000c6c, 1)
mmctx_data(0x000c80, 1)
mmctx_data(0x000c8c, 1)
mmctx_data(0x001000, 3)
mmctx_data(0x001014, 1)
nvd9_gpc_mmio_tail:

// TPC mmio lists
nvc0_tpc_mmio_head:
mmctx_data(0x000018, 1)
mmctx_data(0x00003c, 1)
mmctx_data(0x000048, 1)
mmctx_data(0x000064, 1)
mmctx_data(0x000088, 1)
mmctx_data(0x000200, 6)
mmctx_data(0x00021c, 2)
mmctx_data(0x000300, 6)
mmctx_data(0x0003d0, 1)
mmctx_data(0x0003e0, 2)
mmctx_data(0x000400, 3)
mmctx_data(0x000420, 1)
mmctx_data(0x0004b0, 1)
mmctx_data(0x0004e8, 1)
mmctx_data(0x0004f4, 1)
mmctx_data(0x000520, 2)
mmctx_data(0x000604, 4)
mmctx_data(0x000644, 20)
mmctx_data(0x000698, 1)
mmctx_data(0x000750, 2)
nvc0_tpc_mmio_tail:
mmctx_data(0x000758, 1)
mmctx_data(0x0002c4, 1)
mmctx_data(0x0006e0, 1)
nvcf_tpc_mmio_tail:
mmctx_data(0x0004bc, 1)
nvc3_tpc_mmio_tail:
mmctx_data(0x000544, 1)
nvc1_tpc_mmio_tail:

nvd9_tpc_mmio_head:
mmctx_data(0x000018, 1)
mmctx_data(0x00003c, 1)
mmctx_data(0x000048, 1)
mmctx_data(0x000064, 1)
mmctx_data(0x000088, 1)
mmctx_data(0x000200, 6)
mmctx_data(0x00021c, 2)
mmctx_data(0x0002c4, 1)
mmctx_data(0x000300, 6)
mmctx_data(0x0003d0, 1)
mmctx_data(0x0003e0, 2)
mmctx_data(0x000400, 3)
mmctx_data(0x000420, 3)
mmctx_data(0x0004b0, 1)
mmctx_data(0x0004e8, 1)
mmctx_data(0x0004f4, 1)
mmctx_data(0x000520, 2)
mmctx_data(0x000544, 1)
mmctx_data(0x000604, 4)
mmctx_data(0x000644, 20)
mmctx_data(0x000698, 1)
mmctx_data(0x0006e0, 1)
mmctx_data(0x000750, 3)
nvd9_tpc_mmio_tail:

.section #nvc0_grgpc_code
bra #init
define(`include_code')
include(`nvc0.fuc')

// reports an exception to the host
//
// In: $r15 error code (see nvc0.fuc)
//
error:
	push $r14
	mov $r14 -0x67ec 	// 0x9814
	sethi $r14 0x400000
	call #nv_wr32		// HUB_CTXCTL_CC_SCRATCH[5] = error code
	add b32 $r14 0x41c
	mov $r15 1
	call #nv_wr32		// HUB_CTXCTL_INTR_UP_SET
	pop $r14
	ret

// GPC fuc initialisation, executed by triggering ucode start, will
// fall through to main loop after completion.
//
// Input:
//   CC_SCRATCH[0]: chipset (PMC_BOOT_0 read returns 0x0bad0bad... sigh)
//   CC_SCRATCH[1]: context base
//
// Output:
//   CC_SCRATCH[0]:
//	     31:31: set to signal completion
//   CC_SCRATCH[1]:
//	      31:0: GPC context size
//
init:
	clear b32 $r0
	mov $sp $r0

	// enable fifo access
	mov $r1 0x1200
	mov $r2 2
	iowr I[$r1 + 0x000] $r2		// FIFO_ENABLE

	// setup i0 handler, and route all interrupts to it
	mov $r1 #ih
	mov $iv0 $r1
	mov $r1 0x400
	iowr I[$r1 + 0x300] $r0		// INTR_DISPATCH

	// enable fifo interrupt
	mov $r2 4
	iowr I[$r1 + 0x000] $r2		// INTR_EN_SET

	// enable interrupts
	bset $flags ie0

	// figure out which GPC we are, and how many TPCs we have
	mov $r1 0x608
	shl b32 $r1 6
	iord $r2 I[$r1 + 0x000]		// UNITS
	mov $r3 1
	and $r2 0x1f
	shl b32 $r3 $r2
	sub b32 $r3 1
	st b32 D[$r0 + #tpc_count] $r2
	st b32 D[$r0 + #tpc_mask] $r3
	add b32 $r1 0x400
	iord $r2 I[$r1 + 0x000]		// MYINDEX
	st b32 D[$r0 + #gpc_id] $r2

	// find context data for this chipset
	mov $r2 0x800
	shl b32 $r2 6
	iord $r2 I[$r2 + 0x000]		// CC_SCRATCH[0]
	mov $r1 #chipsets - 12
	init_find_chipset:
		add b32 $r1 12
		ld b32 $r3 D[$r1 + 0x00]
		cmpu b32 $r3 $r2
		bra e #init_context
		cmpu b32 $r3 0
		bra ne #init_find_chipset
		// unknown chipset
		ret

	// initialise context base, and size tracking
	init_context:
	mov $r2 0x800
	shl b32 $r2 6
	iord $r2 I[$r2 + 0x100]	// CC_SCRATCH[1], initial base
	clear b32 $r3		// track GPC context size here

	// set mmctx base addresses now so we don't have to do it later,
	// they don't currently ever change
	mov $r4 0x700
	shl b32 $r4 6
	shr b32 $r5 $r2 8
	iowr I[$r4 + 0x000] $r5		// MMCTX_SAVE_SWBASE
	iowr I[$r4 + 0x100] $r5		// MMCTX_LOAD_SWBASE

	// calculate GPC mmio context size, store the chipset-specific
	// mmio list pointers somewhere we can get at them later without
	// re-parsing the chipset list
	clear b32 $r14
	clear b32 $r15
	ld b16 $r14 D[$r1 + 4]
	ld b16 $r15 D[$r1 + 6]
	st b16 D[$r0 + #gpc_mmio_list_head] $r14
	st b16 D[$r0 + #gpc_mmio_list_tail] $r15
	call #mmctx_size
	add b32 $r2 $r15
	add b32 $r3 $r15

	// calculate per-TPC mmio context size, store the list pointers
	ld b16 $r14 D[$r1 + 8]
	ld b16 $r15 D[$r1 + 10]
	st b16 D[$r0 + #tpc_mmio_list_head] $r14
	st b16 D[$r0 + #tpc_mmio_list_tail] $r15
	call #mmctx_size
	ld b32 $r14 D[$r0 + #tpc_count]
	mulu $r14 $r15
	add b32 $r2 $r14
	add b32 $r3 $r14

	// round up base/size to 256 byte boundary (for strand SWBASE)
	add b32 $r4 0x1300
	shr b32 $r3 2
	iowr I[$r4 + 0x000] $r3		// MMCTX_LOAD_COUNT, wtf for?!?
	shr b32 $r2 8
	shr b32 $r3 6
	add b32 $r2 1
	add b32 $r3 1
	shl b32 $r2 8
	shl b32 $r3 8

	// calculate size of strand context data
	mov b32 $r15 $r2
	call #strand_ctx_init
	add b32 $r3 $r15

	// save context size, and tell HUB we're done
	mov $r1 0x800
	shl b32 $r1 6
	iowr I[$r1 + 0x100] $r3		// CC_SCRATCH[1]  = context size
	add b32 $r1 0x800
	clear b32 $r2
	bset $r2 31
	iowr I[$r1 + 0x000] $r2		// CC_SCRATCH[0] |= 0x80000000

// Main program loop, very simple, sleeps until woken up by the interrupt
// handler, pulls a command from the queue and executes its handler
//
main:
	bset $flags $p0
	sleep $p0
	mov $r13 #cmd_queue
	call #queue_get
	bra $p1 #main

	// 0x0000-0x0003 are all context transfers
	cmpu b32 $r14 0x04
	bra nc #main_not_ctx_xfer
		// fetch $flags and mask off $p1/$p2
		mov $r1 $flags
		mov $r2 0x0006
		not b32 $r2
		and $r1 $r2
		// set $p1/$p2 according to transfer type
		shl b32 $r14 1
		or $r1 $r14
		mov $flags $r1
		// transfer context data
		call #ctx_xfer
		bra #main

	main_not_ctx_xfer:
	shl b32 $r15 $r14 16
	or $r15 E_BAD_COMMAND
	call #error
	bra #main

// interrupt handler
ih:
	push $r8
	mov $r8 $flags
	push $r8
	push $r9
	push $r10
	push $r11
	push $r13
	push $r14
	push $r15

	// incoming fifo command?
	iord $r10 I[$r0 + 0x200]	// INTR
	and $r11 $r10 0x00000004
	bra e #ih_no_fifo
		// queue incoming fifo command for later processing
		mov $r11 0x1900
		mov $r13 #cmd_queue
		iord $r14 I[$r11 + 0x100]	// FIFO_CMD
		iord $r15 I[$r11 + 0x000]	// FIFO_DATA
		call #queue_put
		add b32 $r11 0x400
		mov $r14 1
		iowr I[$r11 + 0x000] $r14	// FIFO_ACK

	// ack, and wake up main()
	ih_no_fifo:
	iowr I[$r0 + 0x100] $r10	// INTR_ACK

	pop $r15
	pop $r14
	pop $r13
	pop $r11
	pop $r10
	pop $r9
	pop $r8
	mov $flags $r8
	pop $r8
	bclr $flags $p0
	iret

// Set this GPC's bit in HUB_BAR, used to signal completion of various
// activities to the HUB fuc
//
hub_barrier_done:
	mov $r15 1
	ld b32 $r14 D[$r0 + #gpc_id]
	shl b32 $r15 $r14
	mov $r14 -0x6be8 	// 0x409418 - HUB_BAR_SET
	sethi $r14 0x400000
	call #nv_wr32
	ret

// Disables various things, waits a bit, and re-enables them..
//
// Not sure how exactly this helps, perhaps "ENABLE" is not such a
// good description for the bits we turn off?  Anyways, without this,
// funny things happen.
//
ctx_redswitch:
	mov $r14 0x614
	shl b32 $r14 6
	mov $r15 0x020
	iowr I[$r14] $r15	// GPC_RED_SWITCH = POWER
	mov $r15 8
	ctx_redswitch_delay:
		sub b32 $r15 1
		bra ne #ctx_redswitch_delay
	mov $r15 0xa20
	iowr I[$r14] $r15	// GPC_RED_SWITCH = UNK11, ENABLE, POWER
	ret

// Transfer GPC context data between GPU and storage area
//
// In: $r15 context base address
//     $p1 clear on save, set on load
//     $p2 set if opposite direction done/will be done, so:
//		on save it means: "a load will follow this save"
//		on load it means: "a save preceeded this load"
//
ctx_xfer:
	// set context base address
	mov $r1 0xa04
	shl b32 $r1 6
	iowr I[$r1 + 0x000] $r15// MEM_BASE
	bra not $p1 #ctx_xfer_not_load
		call #ctx_redswitch
	ctx_xfer_not_load:

	// strands
	mov $r1 0x4afc
	sethi $r1 0x20000
	mov $r2 0xc
	iowr I[$r1] $r2		// STRAND_CMD(0x3f) = 0x0c
	call #strand_wait
	mov $r2 0x47fc
	sethi $r2 0x20000
	iowr I[$r2] $r0		// STRAND_FIRST_GENE(0x3f) = 0x00
	xbit $r2 $flags $p1
	add b32 $r2 3
	iowr I[$r1] $r2		// STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD)

	// mmio context
	xbit $r10 $flags $p1	// direction
	or $r10 2		// first
	mov $r11 0x0000
	sethi $r11 0x500000
	ld b32 $r12 D[$r0 + #gpc_id]
	shl b32 $r12 15
	add b32 $r11 $r12	// base = NV_PGRAPH_GPCn
	ld b32 $r12 D[$r0 + #gpc_mmio_list_head]
	ld b32 $r13 D[$r0 + #gpc_mmio_list_tail]
	mov $r14 0		// not multi
	call #mmctx_xfer

	// per-TPC mmio context
	xbit $r10 $flags $p1	// direction
	or $r10 4		// last
	mov $r11 0x4000
	sethi $r11 0x500000	// base = NV_PGRAPH_GPC0_TPC0
	ld b32 $r12 D[$r0 + #gpc_id]
	shl b32 $r12 15
	add b32 $r11 $r12	// base = NV_PGRAPH_GPCn_TPC0
	ld b32 $r12 D[$r0 + #tpc_mmio_list_head]
	ld b32 $r13 D[$r0 + #tpc_mmio_list_tail]
	ld b32 $r15 D[$r0 + #tpc_mask]
	mov $r14 0x800		// stride = 0x800
	call #mmctx_xfer

	// wait for strands to finish
	call #strand_wait

	// if load, or a save without a load following, do some
	// unknown stuff that's done after finishing a block of
	// strand commands
	bra $p1 #ctx_xfer_post
	bra not $p2 #ctx_xfer_done
	ctx_xfer_post:
		mov $r1 0x4afc
		sethi $r1 0x20000
		mov $r2 0xd
		iowr I[$r1] $r2		// STRAND_CMD(0x3f) = 0x0d
		call #strand_wait

	// mark completion in HUB's barrier
	ctx_xfer_done:
	call #hub_barrier_done
	ret

.align 256