/*
    comedi/drivers/das08_cs.c
    DAS08 driver

    COMEDI - Linux Control and Measurement Device Interface
    Copyright (C) 2000 David A. Schleef <ds@schleef.org>
    Copyright (C) 2001,2002,2003 Frank Mori Hess <fmhess@users.sourceforge.net>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

    PCMCIA support code for this driver is adapted from the dummy_cs.c
    driver of the Linux PCMCIA Card Services package.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

*****************************************************************

*/
/*
Driver: das08_cs
Description: DAS-08 PCMCIA boards
Author: Warren Jasper, ds, Frank Hess
Devices: [ComputerBoards] PCM-DAS08 (pcm-das08)
Status: works

This is the PCMCIA-specific support split off from the
das08 driver.

Options (for pcm-das08):
	NONE

Command support does not exist, but could be added for this board.
*/

#include <linux/delay.h>
#include <linux/slab.h>

#include "../comedidev.h"

#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>

#include "das08.h"

static const struct das08_board_struct das08_cs_boards[] = {
	{
		.name		= "pcm-das08",
		.ai_nbits	= 12,
		.ai_pg		= das08_bipolar5,
		.ai_encoding	= das08_pcm_encode12,
		.di_nchan	= 3,
		.do_nchan	= 3,
		.iosize		= 16,
	},
};

static int das08_cs_auto_attach(struct comedi_device *dev,
				unsigned long context)
{
	struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
	struct das08_private_struct *devpriv;
	unsigned long iobase;
	int ret;

	/* The das08 driver needs the board_ptr */
	dev->board_ptr = &das08_cs_boards[0];

	link->config_flags |= CONF_AUTO_SET_IO;
	ret = comedi_pcmcia_enable(dev, NULL);
	if (ret)
		return ret;
	iobase = link->resource[0]->start;

	devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
	if (!devpriv)
		return -ENOMEM;
	dev->private = devpriv;

	return das08_common_attach(dev, iobase);
}

static void das08_cs_detach(struct comedi_device *dev)
{
	das08_common_detach(dev);
	comedi_pcmcia_disable(dev);
}

static struct comedi_driver driver_das08_cs = {
	.driver_name	= "das08_cs",
	.module		= THIS_MODULE,
	.auto_attach	= das08_cs_auto_attach,
	.detach		= das08_cs_detach,
};

static int das08_pcmcia_attach(struct pcmcia_device *link)
{
	return comedi_pcmcia_auto_config(link, &driver_das08_cs);
}

static const struct pcmcia_device_id das08_cs_id_table[] = {
	PCMCIA_DEVICE_MANF_CARD(0x01c5, 0x4001),
	PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, das08_cs_id_table);

static struct pcmcia_driver das08_cs_driver = {
	.name		= "pcm-das08",
	.owner		= THIS_MODULE,
	.id_table	= das08_cs_id_table,
	.probe		= das08_pcmcia_attach,
	.remove		= comedi_pcmcia_auto_unconfig,
};
module_comedi_pcmcia_driver(driver_das08_cs, das08_cs_driver);

MODULE_AUTHOR("David A. Schleef <ds@schleef.org>, "
	      "Frank Mori Hess <fmhess@users.sourceforge.net>");
MODULE_DESCRIPTION("Comedi driver for ComputerBoards DAS-08 PCMCIA boards");
MODULE_LICENSE("GPL");