diff --git a/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/Makefile b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/Makefile
new file mode 100644
index 0000000..69fc711
--- /dev/null
+++ b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/Makefile
@@ -0,0 +1,164 @@
+#
+#    Copyright (c) 2010-2012 Nest Labs, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the make file for wpa_supplicant, a free software
+#      implementation of an IEEE 802.11i security supplicant for
+#      Linux, FreeBSD, NetBSD and Microsoft Windows.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+EnableParallel  = Yes
+
+include pre.mak
+
+PackageRoot		:= .
+
+PackageName		:= hostap
+
+PackageSeparator	:=
+
+PackageSourceDir	:= $(PackageRoot)/$(PackageName)
+
+PackageBuildSubdir	:= $(BuildDirectory)/wpa_supplicant
+
+PackageConfigDir	:= configs
+PackageProductConfig 	:= $(PackageConfigDir)/$(BuildProduct)/defconfig
+PackageSiteConfig	:= $(PackageConfigDir)/defconfig
+PackageDefaultConfig	:= $(PackageBuildSubdir)/defconfig
+
+PackageSiteConfig	:= $(if $(wildcard $(PackageProductConfig)),$(PackageProductConfig),$(wildcard $(PackageSiteConfig)))
+
+PackageSourceConfig	:= $(if $(PackageSiteConfig),$(PackageSiteConfig),$(PackageDefaultConfig))
+PackageBuildConfig	:= $(PackageBuildSubdir)/.config
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+LicenseSourceFile	:= $(PackageSourceDir)/COPYING
+
+CleanPaths		+= $(PackageLicenseFile)
+
+DbusDir			:= sw/tps/dbus
+DbusIncDirs		:= $(call GenerateResultPaths,$(DbusDir),usr/include/dbus-1.0 usr/lib/dbus-1.0/include)
+DbusLibDir		:= $(call GenerateResultPaths,$(DbusDir),usr/lib)
+
+LinuxDir		:= sw/tps/linux
+LinuxIncDir		:= $(call GenerateResultPaths,$(LinuxDir),include)
+
+NetlinkDir		:= sw/tps/libnl
+NetlinkIncDir		:= $(call GenerateResultPaths,$(NetlinkDir),usr/include)
+NetlinkLibDir		:= $(call GenerateResultPaths,$(NetlinkDir),usr/lib)
+
+OpenSSLDir		:= sw/tps/openssl
+OpenSSLIncDir		:= $(call GenerateResultPaths,$(OpenSSLDir),usr/include)
+OpenSSLLibDir		:= $(call GenerateResultPaths,$(OpenSSLDir),usr/lib)
+
+ZlibDir			:= sw/tps/zlib
+ZlibIncDir      	:= $(call GenerateResultPaths,$(ZlibDir),usr/include)
+ZlibLibDir      	:= $(call GenerateResultPaths,$(ZlibDir),usr/lib)
+
+WpaDbusConfSourcePath	:= $(PackageSourceDir)/wpa_supplicant/dbus/dbus-wpa_supplicant.conf
+WpaDbusConfResultPath	:= $(call GenerateResultPaths,,$(notdir $(WpaDbusConfSourcePath)))
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(LicenseSourceFile): source
+
+$(PackageLicenseFile): $(LicenseSourceFile)
+	$(copy-result)
+
+# We are building this package from version-controlled source, so
+# there is nothing to do for this target goal.
+
+$(PackageSourceDir):
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+$(PackageDefaultConfig) $(PackageBuildMakefile) $(PackageBuildSubdir): | $(PackageSourceDir) $(BuildDirectory)
+	$(call create-links,$(CURDIR)/$(PackageSourceDir),$(BuildDirectory))
+
+$(PackageBuildConfig): $(PackageSourceConfig) | $(PackageBuildSubdir)
+	$(copy-result)
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildConfig)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(PackageBuildSubdir) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	CC="$(CC)" CXX="$(CXX)" AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	DBUSCFLAGS="$(call ToolGenerateIncludeArgument,$(DbusIncDirs))" \
+	DBUSLDFLAGS="-L$(DbusLibDir) -ldbus-1" \
+	DBUSVERSION=$(shell cat $(BuildRoot)/$(DbusDir)/dbus.version) \
+	LINUXCFLAGS="$(call ToolGenerateIncludeArgument,$(LinuxIncDir))" \
+	NETLINKCFLAGS="$(call ToolGenerateIncludeArgument,$(NetlinkIncDir))" \
+	NETLINKLDFLAGS="-L$(NetlinkLibDir) -lnl -lnl-genl" \
+	OPENSSLCFLAGS="-I$(OpenSSLIncDir)" \
+	OPENSSLLDFLAGS="-L$(OpenSSLLibDir) -L$(ZlibLibDir) -lz" \
+	all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: stage
+stage: stage-default stage-other
+
+.PHONY: stage-default
+stage-default: build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(PackageBuildSubdir) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	DBUSCFLAGS="$(call ToolGenerateIncludeArgument,$(DbusIncDirs))" \
+	DBUSLDFLAGS="-L$(DbusLibDir) -ldbus-1" \
+	DBUSVERSION=$(shell cat $(BuildRoot)/$(DbusDir)/dbus.version) \
+	LINUXCFLAGS="$(call ToolGenerateIncludeArgument,$(LinuxIncDir))" \
+	NETLINKCFLAGS="$(call ToolGenerateIncludeArgument,$(NetlinkIncDir))" \
+	NETLINKLDFLAGS="-L$(NetlinkLibDir)" \
+	OPENSSLCFLAGS="-I$(OpenSSLIncDir)" \
+	OPENSSLLDFLAGS="-L$(OpenSSLLibDir) -L$(ZlibLibDir) -lz" \
+	BINDIR=/usr/sbin \
+	LIBDIR=/usr/lib \
+	DESTDIR=$(ResultDirectory) \
+	install
+
+.PHONY: stage-other
+stage-other: $(WpaDbusConfResultPath)
+
+$(WpaDbusConfSourcePath): build
+
+$(WpaDbusConfResultPath): $(WpaDbusConfSourcePath) | $(ResultDirectory)
+	$(copy-result)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/defconfig b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/defconfig
new file mode 100644
index 0000000..6b701a4
--- /dev/null
+++ b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/defconfig
@@ -0,0 +1,509 @@
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+DBUS_INCLUDE := $(DBUSCFLAGS)
+DBUS_LIBS := $(DBUSLDFLAGS)
+
+CFLAGS += $(OPENSSLCFLAGS) $(NETLINKCFLAGS) $(LINUXCFLAGS)
+
+wpa_supplicant: LIBS += $(DBUSLDFLAGS) $(OPENSSLLDFLAGS) $(NETLINKLDFLAGS)
+wpa_passphrase: LDFLAGS += $(OPENSSLLDFLAGS)
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+#CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Driver interface for Texas Instruments WiLink drivers
+#CONFIG_DRIVER_TIWLAN=y
+
+# Enable support for the Netlink v2.0 library
+CONFIG_LIBNL20=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WSC 2.0 support
+#CONFIG_WPS2=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+
+# Enable tracing code when the program receives error signals.
+# Signals include:
+# SIGABRT, SIGSEGV, SIGBUS, SIGILL
+CONFIG_WPA_TRACE_SIGNALS=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
diff --git a/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.tar.gz b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.tar.gz
new file mode 100644
index 0000000..be3764c
--- /dev/null
+++ b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.tar.gz
Binary files differ
diff --git a/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.url b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.url
new file mode 100644
index 0000000..9104556
--- /dev/null
+++ b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.url
@@ -0,0 +1 @@
+git://w1.fi/srv/git/hostap.git
diff --git a/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.version b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.version
new file mode 100644
index 0000000..a803fcf
--- /dev/null
+++ b/hostap-22760dd94722a61175ff90c59d88c4cda1ed5e23/hostap.version
@@ -0,0 +1 @@
+22760dd94722a61175ff90c59d88c4cda1ed5e23