diff --git a/udev-166/Makefile b/udev-166/Makefile
new file mode 100644
index 0000000..5bfa237
--- /dev/null
+++ b/udev-166/Makefile
@@ -0,0 +1,137 @@
+#
+#    Copyright (c) 2010-2012 Nest Labs, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the makefile for udev, the dynamic device node
+#      manager for Linux.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+EnableParallel  = Yes
+
+include pre.mak
+
+PackageName		:= udev
+
+PackageExtension	:= tar.bz2
+PackageSeparator	:= -
+
+PackagePatchArgs	:= -p1
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+GlibDir			:= sw/tps/glib
+GlibIncDir      	:= $(call GenerateResultPaths,$(GlibDir),usr/include)
+GlibLibDir      	:= $(call GenerateResultPaths,$(GlibDir),usr/lib)
+
+LinuxIncDir		:= $(call GenerateResultPaths,sw/tps/linux,include)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC)" CXX="$(CXX)" AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	CPPFLAGS="-I$(LinuxIncDir)" \
+	GLIB_CFLAGS="-I$(GlibIncDir)" \
+	GLIB_LIBS="-L$(GlibLibDir)" \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--disable-extras \
+	--disable-introspection \
+	--enable-static \
+	--enable-shared \
+	--without-selinux \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--sbindir=/sbin \
+	--libdir=/usr/lib \
+	--with-rootlibdir=/lib \
+	--libexecdir=/lib/udev \
+	--localstatedir=/var
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libfoo.la' because some packages that depend on
+# these libraries use libtool. If libtool finds a 'libfoo.la' file for
+# a library, it uses the value of 'libdir=<dir>' it finds. In our
+# case, since '--prefix=/usr' this value is '/usr/lib'. It then
+# resolves '-lfoo'. In a cross-compilation environment, this is likely
+# to be neither the right architecture nor the right version to link
+# against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libudev.la)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/udev-166/udev.patches.tar.gz b/udev-166/udev.patches.tar.gz
new file mode 100644
index 0000000..10e87e2
--- /dev/null
+++ b/udev-166/udev.patches.tar.gz
Binary files differ
diff --git a/udev-166/udev.tar.bz2 b/udev-166/udev.tar.bz2
new file mode 100644
index 0000000..7d1905c
--- /dev/null
+++ b/udev-166/udev.tar.bz2
Binary files differ
diff --git a/udev-166/udev.url b/udev-166/udev.url
new file mode 100644
index 0000000..d0dd82d
--- /dev/null
+++ b/udev-166/udev.url
@@ -0,0 +1 @@
+http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev-166.tar.bz2
diff --git a/udev-166/udev.version b/udev-166/udev.version
new file mode 100644
index 0000000..cdffbbc
--- /dev/null
+++ b/udev-166/udev.version
@@ -0,0 +1 @@
+166