diff --git a/libusb-compat-0.1.3/Makefile b/libusb-compat-0.1.3/Makefile
new file mode 100644
index 0000000..0fe5a6e
--- /dev/null
+++ b/libusb-compat-0.1.3/Makefile
@@ -0,0 +1,123 @@
+#
+#    Copyright (c) 2010-2011 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the make file for libusb-compat, an ABI and API
+#      compatibility library for libusb-0.1 to libusb.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+EnableParallel  = Yes
+
+include pre.mak
+
+PackageName		:= libusb-compat
+
+PackageExtension	:= tar.bz2
+PackageSeparator	:= -
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+LibUSBDir		:= sw/tps/libusb
+LibUSBIncDir		= $(call GenerateResultPaths,$(LibUSBDir),usr/include/libusb-1.0) 
+LibUSBLibDir		= $(call GenerateResultPaths,$(LibUSBDir),usr/lib)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC)" CXX="$(CXX)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	LIBUSB_1_0_CFLAGS=-I$(LibUSBIncDir) \
+	LIBUSB_1_0_LIBS=-L$(LibUSBLibDir) \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libusb.la' because some packages that depend
+# on libusb use libtool. If libtool finds a '*.la' file for a
+# library, it uses the value of 'libdir=<dir>' it finds. In our case,
+# since '--prefix=/usr' this value is '/usr/lib'. It then resolves
+# '-lusb' to '/usr/lib/libusb.so'. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libusb.la)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/libusb-compat-0.1.3/libusb-compat.tar.bz2 b/libusb-compat-0.1.3/libusb-compat.tar.bz2
new file mode 100644
index 0000000..a0b4dd9
--- /dev/null
+++ b/libusb-compat-0.1.3/libusb-compat.tar.bz2
Binary files differ
diff --git a/libusb-compat-0.1.3/libusb-compat.url b/libusb-compat-0.1.3/libusb-compat.url
new file mode 100644
index 0000000..169bf3b
--- /dev/null
+++ b/libusb-compat-0.1.3/libusb-compat.url
@@ -0,0 +1 @@
+http://download.sourceforge.net/libusb/libusb-compat-0.1/libusb-compat-0.1.3.tar.bz2
diff --git a/libusb-compat-0.1.3/libusb-compat.version b/libusb-compat-0.1.3/libusb-compat.version
new file mode 100644
index 0000000..b1e80bb
--- /dev/null
+++ b/libusb-compat-0.1.3/libusb-compat.version
@@ -0,0 +1 @@
+0.1.3