diff --git a/gnutls-2.8.6/Makefile b/gnutls-2.8.6/Makefile
new file mode 100644
index 0000000..f291d7d
--- /dev/null
+++ b/gnutls-2.8.6/Makefile
@@ -0,0 +1,145 @@
+#
+#    Copyright (c) 2010-2012 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the make file for the GNU TLS library, providing a
+#      secure layer over a reliable network transport.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+EnableParallel  = Yes
+
+include pre.mak
+
+PackageName		:= gnutls
+
+PackageExtension	:= tar.bz2
+PackageSeparator	:= -
+
+PackagePatchArgs	:= -p1
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+LicenseSourceFile	:= $(PackageSourceDir)/COPYING
+
+CleanPaths		+= $(PackageLicenseFile)
+
+GcryptDir		:= sw/tps/libgcrypt
+GcryptIncDir		:= $(call GenerateResultPaths,$(GcryptDir),usr/include)
+GcryptLibDir		:= $(call GenerateResultPaths,$(GcryptDir),usr/lib)
+
+GpgErrorDir		:= sw/tps/libgpg-error
+GpgErrorIncDir		:= $(call GenerateResultPaths,$(GpgErrorDir),usr/include)
+GpgErrorLibDir		:= $(call GenerateResultPaths,$(GpgErrorDir),usr/lib)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(LicenseSourceFile): source
+
+$(PackageLicenseFile): $(LicenseSourceFile)
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC)" CXX="$(CXX)" AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	CPPFLAGS="$(call ToolGenerateIncludeArgument,$(GpgErrorIncDir))" \
+	LDFLAGS="$(call ToolGenerateLibraryPathArgument,$(GpgErrorLibDir))" \
+	ac_cv_libgcrypt=yes \
+	ac_cv_libtasn1=yes \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--target=$(TargetTuple) \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var \
+	--disable-cxx \
+	--disable-gtk-doc \
+	--disable-gtk-doc-html \
+	--disable-gtk-doc-pdf \
+	--with-included-libtasn1 \
+	--with-libgcrypt-prefix=$(call GenerateResultPaths,$(GcryptDir),usr)
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+	all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libavahi-core.la' and 'libavahi-common.la'
+# because some packages that depend on these libraries use libtool. If
+# libtool finds a '*.la' file for a library, it uses the value of
+# 'libdir=<dir>' it finds. In our case, since '--prefix=/usr' this
+# value is '/usr/lib'. It then resolves '-lavahi-core' or
+# '-lavahi-common' to '/usr/lib/libavahi-core.so' and
+# '/usr/lib/libavahi-common.so', respectively. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+	DESTDIR=$(ResultDirectory) \
+	install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,$(addprefix usr/lib/, libgnutls.la libgnutls-extra.la libgnutls-openssl.la))
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/gnutls-2.8.6/gnutls.patches.tar.gz b/gnutls-2.8.6/gnutls.patches.tar.gz
new file mode 100644
index 0000000..ca6864b
--- /dev/null
+++ b/gnutls-2.8.6/gnutls.patches.tar.gz
Binary files differ
diff --git a/gnutls-2.8.6/gnutls.tar.bz2 b/gnutls-2.8.6/gnutls.tar.bz2
new file mode 100644
index 0000000..1e63953
--- /dev/null
+++ b/gnutls-2.8.6/gnutls.tar.bz2
Binary files differ
diff --git a/gnutls-2.8.6/gnutls.url b/gnutls-2.8.6/gnutls.url
new file mode 100644
index 0000000..2ce58d7
--- /dev/null
+++ b/gnutls-2.8.6/gnutls.url
@@ -0,0 +1 @@
+http://ftp.gnu.org/gnu/gnutls/gnutls-2.8.6.tar.bz2
diff --git a/gnutls-2.8.6/gnutls.version b/gnutls-2.8.6/gnutls.version
new file mode 100644
index 0000000..e43686a
--- /dev/null
+++ b/gnutls-2.8.6/gnutls.version
@@ -0,0 +1 @@
+2.8.6