diff --git a/libedit-20130611-3.1/Makefile b/libedit-20130611-3.1/Makefile
new file mode 100644
index 0000000..db6a414
--- /dev/null
+++ b/libedit-20130611-3.1/Makefile
@@ -0,0 +1,128 @@
+#
+#    Copyright (c) 2010-2011 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the makefile for libedit, a BSD-licensed
+#      alternative to libreadline.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+EnableParallel  = Yes
+
+include pre.mak
+
+PackageName		:= libedit
+
+PackageExtension	:= tar.gz
+PackageSeparator	:= -
+
+PackagePatchArgs	:= -p1
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)/
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+
+NCursesDir		:= sw/tps/ncurses
+NCursesIncDir		= $(call GenerateResultPaths,$(NCursesDir),usr/include)
+NCursesLibDir		= $(call GenerateResultPaths,$(NCursesDir),usr/lib)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+	$(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC="$(CC)" CXX="$(CXX)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+	CPPFLAGS="-I$(NCursesIncDir)" \
+	LDFLAGS="-L$(NCursesLibDir)" \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var
+
+# Configure the source for building.
+#
+# Avahi uses and, in fact, requires pkg-config to set-up LDFLAGS and
+# CFLAGS for LIBDAEMON even though these are explicitly provided on
+# the configure command line above as prescribed in the "how to
+# configure WITHOUT pkg-config" instructions.
+#
+# Unfortunately, some site Linux systems are quite old and have a
+# version of pkg-config that avahi refuses to work with.
+# Consequently, we place $(HostBinDir) first in the path to ensure
+# that the project-local version of pkg-config is detected and used
+# rather than a host- or site-local version.
+
+configure: PATH := $(HostBinDir):$(PATH)
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+
+.PHONY: build
+build: configure
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+	$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+	-ln -s editline $(ResultDirectory)/usr/include/readline
+	-ln -s ../histedit.h $(ResultDirectory)/usr/include/readline/history.h
+	-ln -s libedit.so $(ResultDirectory)/usr/lib/libreadline.so
+	-ln -s libedit.a $(ResultDirectory)/usr/lib/libreadline.a
+
+
+DeviceUser:=root
+quick-install: stage
+	tar -czC $(ResultDirectory)/usr/ . | ssh $(DeviceUser)@$(DeviceAddress) tar xvzC /usr
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
+
+
+
diff --git a/libedit-20130611-3.1/libedit.tar.gz b/libedit-20130611-3.1/libedit.tar.gz
new file mode 100644
index 0000000..117c135
--- /dev/null
+++ b/libedit-20130611-3.1/libedit.tar.gz
Binary files differ
diff --git a/libedit-20130611-3.1/libedit.url b/libedit-20130611-3.1/libedit.url
new file mode 100644
index 0000000..44ef949
--- /dev/null
+++ b/libedit-20130611-3.1/libedit.url
@@ -0,0 +1 @@
+http://www.thrysoee.dk/editline/libedit-20130611-3.1.tar.gz
diff --git a/libedit-20130611-3.1/libedit.version b/libedit-20130611-3.1/libedit.version
new file mode 100644
index 0000000..a458884
--- /dev/null
+++ b/libedit-20130611-3.1/libedit.version
@@ -0,0 +1 @@
+20130611-3.1