blob: 5b9ea4032e89e0e21f924b41ff6e93e9a7ea2ac8 [file] [log] [blame]
* Freescale PxP Controller for i.MX6DL, i.MX6SL
Required properties for PxP controller:
- compatible: should be "fsl,<soc>-pxp-dma"
- reg: <base addr, range> contains pxp register base address and range
- interrupts: <type num flag> where type is an interrupt type, num is the
interrupt number and flag is a field that level/trigger information for
the interrupt.
- clocks: the clock sources that pxp depends on.
- clock-names: the name is related to the clock source
Required properties for pxp on specified board:
- status: should be set to "okay" if want to use PxP
Examples:
for SOC imx6dl.dtsi:
pxp@020f0000 {
compatible = "fsl,imx6dl-pxp-dma";
reg = <0x020f0000 0x4000>;
interrupts = <0 98 0x04>;
clocks = <&clks 133>;
clock-names = "pxp-axi";
status = "disabled";
};
for board imx6dl-sabresd.dts:
&pxp {
status = "okay";
};