blob: 8b40cac24d93959740b828f8614736177028f066 [file] [log] [blame]
TPS6586x family of regulators
Required properties:
- compatible: "ti,tps6586x"
- reg: I2C slave address
- interrupts: the interrupt outputs of the controller
- #gpio-cells: number of cells to describe a GPIO
- gpio-controller: mark the device as a GPIO controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name (or the deprecated
regulator-compatible property if present), with valid values listed below.
The content of each sub-node is defined by the standard binding for
regulators; see regulator.txt.
sys, sm[0-2], ldo[0-9] and ldo_rtc
- sys-supply: The input supply for SYS.
- vin-sm0-supply: The input supply for the SM0.
- vin-sm1-supply: The input supply for the SM1.
- vin-sm2-supply: The input supply for the SM2.
- vinldo01-supply: The input supply for the LDO1 and LDO2
- vinldo23-supply: The input supply for the LDO2 and LDO3
- vinldo4-supply: The input supply for the LDO4
- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
- vinldo9-supply: The input supply for the LDO9
Optional properties:
- ti,system-power-controller: Telling whether or not this pmic is controlling
the system power.
Each regulator is defined using the standard binding for regulators.
Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
take care of making proper parent child relationship.
Example:
pmu: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <0 88 0x4>;
#gpio-cells = <2>;
gpio-controller;
ti,system-power-controller;
sys-supply = <&some_reg>;
vin-sm0-supply = <&some_reg>;
vin-sm1-supply = <&some_reg>;
vin-sm2-supply = <&some_reg>;
vinldo01-supply = <...>;
vinldo23-supply = <...>;
vinldo4-supply = <...>;
vinldo678-supply = <...>;
vinldo9-supply = <...>;
regulators {
sys_reg: sys {
regulator-name = "vdd_sys";
regulator-boot-on;
regulator-always-on;
};
sm0_reg: sm0 {
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sm1_reg: sm1 {
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sm2_reg: sm2 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <4550000>;
regulator-boot-on;
regulator-always-on;
};
ldo0_reg: ldo0 {
regulator-name = "PCIE CLK";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo1_reg: ldo1 {
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
ldo2_reg: ldo2 {
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo4_reg: ldo4 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2475000>;
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo6_reg: ldo6 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo8_reg: ldo8 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
};
};