nfs-utils-1.2.2/utils/gssd/context_mit.c

/*
  Copyright (c) 2004 The Regents of the University of Michigan.
  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in the
     documentation and/or other materials provided with the distribution.
  3. Neither the name of the University nor the names of its
     contributors may be used to endorse or promote products derived
     from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif	/* HAVE_CONFIG_H */

#ifndef HAVE_LUCID_CONTEXT_SUPPORT
#ifdef HAVE_KRB5

#include <stdio.h>
#include <syslog.h>
#include <string.h>
#include <gssapi/gssapi.h>
#include <rpc/rpc.h>
#include <rpc/auth_gss.h>
#include "gss_util.h"
#include "gss_oids.h"
#include "err_util.h"
#include "context.h"

#include <krb5.h>

#if (KRB5_VERSION > 131)
/* XXX argggg, there's gotta be a better way than just duplicating this
 * whole struct.  Unfortunately, this is in a "private" header file,
 * so this is our best choice at this point :-/
 *
 * XXX Does this match the Heimdal definition?  */

typedef struct _krb5_gss_ctx_id_rec {
   unsigned int initiate : 1;   /* nonzero if initiating, zero if accepting */
   unsigned int established : 1;
   unsigned int big_endian : 1;
   unsigned int have_acceptor_subkey : 1;
   unsigned int seed_init : 1;  /* XXX tested but never actually set */
#ifdef CFX_EXERCISE
   unsigned int testing_unknown_tokid : 1; /* for testing only */
#endif
   OM_uint32 gss_flags;
   unsigned char seed[16];
   krb5_principal here;
   krb5_principal there;
   krb5_keyblock *subkey;
   int signalg;
   size_t cksum_size;
   int sealalg;
   krb5_keyblock *enc;
   krb5_keyblock *seq;
   krb5_timestamp endtime;
   krb5_flags krb_flags;
   /* XXX these used to be signed.  the old spec is inspecific, and
      the new spec specifies unsigned.  I don't believe that the change
      affects the wire encoding. */
   uint64_t seq_send;		/* gssint_uint64 */
   uint64_t seq_recv;		/* gssint_uint64 */
   void *seqstate;
   krb5_auth_context auth_context;
   gss_OID_desc *mech_used;	/* gss_OID_desc */
    /* Protocol spec revision
       0 => RFC 1964 with 3DES and RC4 enhancements
       1 => draft-ietf-krb-wg-gssapi-cfx-01
       No others defined so far.  */
   int proto;
   krb5_cksumtype cksumtype;    /* for "main" subkey */
   krb5_keyblock *acceptor_subkey; /* CFX only */
   krb5_cksumtype acceptor_subkey_cksumtype;
#ifdef CFX_EXERCISE
    gss_buffer_desc init_token;
#endif
} krb5_gss_ctx_id_rec, *krb5_gss_ctx_id_t;

#else	/* KRB5_VERSION > 131 */

typedef struct _krb5_gss_ctx_id_rec {
	int initiate;
	u_int32_t gss_flags;
	int seed_init;
	unsigned char seed[16];
	krb5_principal here;
	krb5_principal there;
	krb5_keyblock *subkey;
	int signalg;
	int cksum_size;
	int sealalg;
	krb5_keyblock *enc;
	krb5_keyblock *seq;
	krb5_timestamp endtime;
	krb5_flags krb_flags;
	krb5_ui_4 seq_send;
	krb5_ui_4 seq_recv;
	void *seqstate;
	int established;
	int big_endian;
	krb5_auth_context auth_context;
	gss_OID_desc *mech_used;
	int nctypes;
	krb5_cksumtype *ctypes;
} krb5_gss_ctx_id_rec, *krb5_gss_ctx_id_t;

#endif /* KRB5_VERSION */


static int
write_keyblock(char **p, char *end, struct _krb5_keyblock *arg)
{
	gss_buffer_desc tmp;

	if (WRITE_BYTES(p, end, arg->enctype)) return -1;
	tmp.length = arg->length;
	tmp.value = arg->contents;
	if (write_buffer(p, end, &tmp)) return -1;
	return 0;
}

/*
 * We really shouldn't know about glue-layer context structure, but
 * we need to get at the real krb5 context pointer.  This should be
 * removed as soon as we say there is no support for MIT Kerberos
 * prior to 1.4 -- which gives us "legal" access to the context info.
 */
typedef struct gss_union_ctx_id_t {
	gss_OID         mech_type;
	gss_ctx_id_t    internal_ctx_id;
} gss_union_ctx_id_desc, *gss_union_ctx_id_t;

int
serialize_krb5_ctx(gss_ctx_id_t ctx, gss_buffer_desc *buf, int32_t *endtime)
{
	krb5_gss_ctx_id_t kctx = ((gss_union_ctx_id_t)ctx)->internal_ctx_id;
	char *p, *end;
	static int constant_one = 1;
	static int constant_zero = 0;
	uint32_t word_seq_send;

	if (!(buf->value = calloc(1, MAX_CTX_LEN)))
		goto out_err;
	p = buf->value;
	end = buf->value + MAX_CTX_LEN;

	if (kctx->initiate) {
		if (WRITE_BYTES(&p, end, constant_one)) goto out_err;
	}
	else {
		if (WRITE_BYTES(&p, end, constant_zero)) goto out_err;
	}
	if (kctx->seed_init) {
		if (WRITE_BYTES(&p, end, constant_one)) goto out_err;
	}
	else {
		if (WRITE_BYTES(&p, end, constant_zero)) goto out_err;
	}
	if (write_bytes(&p, end, &kctx->seed, sizeof(kctx->seed)))
		goto out_err;
	if (WRITE_BYTES(&p, end, kctx->signalg)) goto out_err;
	if (WRITE_BYTES(&p, end, kctx->sealalg)) goto out_err;
	if (WRITE_BYTES(&p, end, kctx->endtime)) goto out_err;
	if (endtime)
		*endtime = kctx->endtime;
	word_seq_send = kctx->seq_send;
	if (WRITE_BYTES(&p, end, word_seq_send)) goto out_err;
	if (write_oid(&p, end, kctx->mech_used)) goto out_err;

	printerr(2, "serialize_krb5_ctx: serializing keys with "
		 "enctype %d and length %d\n",
		 kctx->enc->enctype, kctx->enc->length);

	if (write_keyblock(&p, end, kctx->enc)) goto out_err;
	if (write_keyblock(&p, end, kctx->seq)) goto out_err;

	buf->length = p - (char *)buf->value;
	return 0;
out_err:
	printerr(0, "ERROR: failed serializing krb5 context for kernel\n");
	if (buf->value) free(buf->value);
	buf->length = 0;
	return -1;
}

#endif /* HAVE_KRB5 */
#endif /* HAVE_LUCID_CONTEXT_SUPPORT */