/*
 * Copyright (C) 2011-2014 Freescale Semiconductor, Inc.
 * Jason Liu <r64343@freescale.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 * Refer doc/README.imximage for more details about how-to configure
 * and create imximage boot image
 *
 * The syntax is taken as close as possible with the kwbimage
 */

#define __ASSEMBLY__
#include <config.h>
/* image version */
IMAGE_VERSION 2

/*
 * Boot Device : one of spi, sd, sata
 * the board has no nand and eimnor
 * spinor: flash_offset: 0x0400
 * sata:   flash_offset: 0x0400
 * sd/mmc: flash_offset: 0x0400
 */

/* the same flash_offset as sd */
BOOT_FROM      sd

#ifdef CONFIG_USE_PLUGIN
/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
PLUGIN	board/freescale/mx6sabresd/plugin.bin 0x00907000
#else

#ifdef CONFIG_SECURE_BOOT
CSF 0x2000
#endif

/*
 * Device Configuration Data (DCD)
 *
 * Each entry must have the format:
 * Addr-type           Address        Value
 *
 * where:
 *      Addr-type register length (1,2 or 4 bytes)
 *      Address   absolute address of the register
 *      value     value to be stored in the register
 */
DATA 4, 0x020e0798, 0x000C0000
DATA 4, 0x020e0758, 0x00000000
DATA 4, 0x020e0588, 0x00000030
DATA 4, 0x020e0594, 0x00000030
DATA 4, 0x020e056c, 0x00000030
DATA 4, 0x020e0578, 0x00000030
DATA 4, 0x020e074c, 0x00000030
DATA 4, 0x020e057c, 0x00000030
DATA 4, 0x020e058c, 0x00000000
DATA 4, 0x020e059c, 0x00000030
DATA 4, 0x020e05a0, 0x00000030
DATA 4, 0x020e078c, 0x00000030
DATA 4, 0x020e0750, 0x00020000
DATA 4, 0x020e05a8, 0x00000030
DATA 4, 0x020e05b0, 0x00000030
DATA 4, 0x020e0524, 0x00000030
DATA 4, 0x020e051c, 0x00000030
DATA 4, 0x020e0518, 0x00000030
DATA 4, 0x020e050c, 0x00000030
DATA 4, 0x020e05b8, 0x00000030
DATA 4, 0x020e05c0, 0x00000030
DATA 4, 0x020e0774, 0x00020000
DATA 4, 0x020e0784, 0x00000030
DATA 4, 0x020e0788, 0x00000030
DATA 4, 0x020e0794, 0x00000030
DATA 4, 0x020e079c, 0x00000030
DATA 4, 0x020e07a0, 0x00000030
DATA 4, 0x020e07a4, 0x00000030
DATA 4, 0x020e07a8, 0x00000030
DATA 4, 0x020e0748, 0x00000030
DATA 4, 0x020e05ac, 0x00000030
DATA 4, 0x020e05b4, 0x00000030
DATA 4, 0x020e0528, 0x00000030
DATA 4, 0x020e0520, 0x00000030
DATA 4, 0x020e0514, 0x00000030
DATA 4, 0x020e0510, 0x00000030
DATA 4, 0x020e05bc, 0x00000030
DATA 4, 0x020e05c4, 0x00000030
DATA 4, 0x021b0800, 0xa1390003
DATA 4, 0x021b080c, 0x001F001F
DATA 4, 0x021b0810, 0x001F001F
DATA 4, 0x021b480c, 0x001F001F
DATA 4, 0x021b4810, 0x001F001F
DATA 4, 0x021b083c, 0x43270338
DATA 4, 0x021b0840, 0x03200314
DATA 4, 0x021b483c, 0x431A032F
DATA 4, 0x021b4840, 0x03200263
DATA 4, 0x021b0848, 0x4B434748
DATA 4, 0x021b4848, 0x4445404C
DATA 4, 0x021b0850, 0x38444542
DATA 4, 0x021b4850, 0x4935493A
DATA 4, 0x021b081c, 0x33333333
DATA 4, 0x021b0820, 0x33333333
DATA 4, 0x021b0824, 0x33333333
DATA 4, 0x021b0828, 0x33333333
DATA 4, 0x021b481c, 0x33333333
DATA 4, 0x021b4820, 0x33333333
DATA 4, 0x021b4824, 0x33333333
DATA 4, 0x021b4828, 0x33333333
DATA 4, 0x021b08b8, 0x00000800
DATA 4, 0x021b48b8, 0x00000800
DATA 4, 0x021b0004, 0x00020036
DATA 4, 0x021b0008, 0x09444040
DATA 4, 0x021b000c, 0x555A7975
DATA 4, 0x021b0010, 0xFF538F64
DATA 4, 0x021b0014, 0x01FF00DB
DATA 4, 0x021b0018, 0x00001740
DATA 4, 0x021b001c, 0x00008000
DATA 4, 0x021b002c, 0x000026d2
DATA 4, 0x021b0030, 0x005A1023
DATA 4, 0x021b0040, 0x00000027
DATA 4, 0x021b0000, 0x831A0000
DATA 4, 0x021b001c, 0x04088032
DATA 4, 0x021b001c, 0x00008033
DATA 4, 0x021b001c, 0x00048031
DATA 4, 0x021b001c, 0x09408030
DATA 4, 0x021b001c, 0x04008040
DATA 4, 0x021b0020, 0x00005800
DATA 4, 0x021b0818, 0x00011117
DATA 4, 0x021b4818, 0x00011117
DATA 4, 0x021b0004, 0x00025576
DATA 4, 0x021b0404, 0x00011006
DATA 4, 0x021b001c, 0x00000000

/* set the default clock gate to save power */
DATA 4, 0x020c4068, 0x00C03F3F
DATA 4, 0x020c406c, 0x0030FC03
DATA 4, 0x020c4070, 0x0FFFC000
DATA 4, 0x020c4074, 0x3FF00000
DATA 4, 0x020c4078, 0x00FFF300
DATA 4, 0x020c407c, 0x0F0000F3
DATA 4, 0x020c4080, 0x000003FF

/* enable AXI cache for VDOA/VPU/IPU */
DATA 4, 0x020e0010, 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4, 0x020e0018, 0x007F007F
DATA 4, 0x020e001c, 0x007F007F

/*
 * Setup CCM_CCOSR register as follows:
 *
 * cko1_en  = 1	   --> CKO1 enabled
 * cko1_div = 111  --> divide by 8
 * cko1_sel = 1011 --> ahb_clk_root
 *
 * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
 */
DATA 4, 0x020c4060, 0x000000fb
#endif