# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at http://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################


srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/curl-config.in \
	$(srcdir)/libcurl.pc.in $(top_srcdir)/configure COPYING \
	compile config.guess config.sub depcomp install-sh ltmain.sh \
	missing mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
	$(top_srcdir)/m4/curl-confopts.m4 \
	$(top_srcdir)/m4/curl-functions.m4 \
	$(top_srcdir)/m4/curl-openssl.m4 \
	$(top_srcdir)/m4/curl-override.m4 \
	$(top_srcdir)/m4/curl-reentrant.m4 \
	$(top_srcdir)/m4/curl-system.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/xc-translit.m4 \
	$(top_srcdir)/m4/zz50-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
	$(top_builddir)/src/curl_config.h \
	$(top_builddir)/include/curl/curlbuild.h
CONFIG_CLEAN_FILES = curl-config libcurl.pc
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_LIBHOSTNAME_FALSE = @BUILD_LIBHOSTNAME_FALSE@
BUILD_LIBHOSTNAME_TRUE = @BUILD_LIBHOSTNAME_TRUE@
BUILD_UNITTESTS_FALSE = @BUILD_UNITTESTS_FALSE@
BUILD_UNITTESTS_TRUE = @BUILD_UNITTESTS_TRUE@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CROSSCOMPILING_FALSE = @CROSSCOMPILING_FALSE@
CROSSCOMPILING_TRUE = @CROSSCOMPILING_TRUE@
CURLDEBUG_FALSE = @CURLDEBUG_FALSE@
CURLDEBUG_TRUE = @CURLDEBUG_TRUE@
CURLVERSION = @CURLVERSION@
CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
CURL_LIBS = @CURL_LIBS@
CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_SHARED = @ENABLE_SHARED@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
HAVE_LIBZ = @HAVE_LIBZ@
HAVE_LIBZ_FALSE = @HAVE_LIBZ_FALSE@
HAVE_LIBZ_TRUE = @HAVE_LIBZ_TRUE@
HAVE_PK11_CREATEGENERICOBJECT = @HAVE_PK11_CREATEGENERICOBJECT@
HAVE_SSLEAY_SRP = @HAVE_SSLEAY_SRP@
IDN_ENABLED = @IDN_ENABLED@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IPV6_ENABLED = @IPV6_ENABLED@
KRB4_ENABLED = @KRB4_ENABLED@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCURL_LIBS = @LIBCURL_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MANOPT = @MANOPT@
MIMPURE_FALSE = @MIMPURE_FALSE@
MIMPURE_TRUE = @MIMPURE_TRUE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNDEFINED_FALSE = @NO_UNDEFINED_FALSE@
NO_UNDEFINED_TRUE = @NO_UNDEFINED_TRUE@
NROFF = @NROFF@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH = @PATH@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKGADD_NAME = @PKGADD_NAME@
PKGADD_PKG = @PKGADD_PKG@
PKGADD_VENDOR = @PKGADD_VENDOR@
PKGCONFIG = @PKGCONFIG@
RANDOM_FILE = @RANDOM_FILE@
RANLIB = @RANLIB@
REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SONAME_BUMP_FALSE = @SONAME_BUMP_FALSE@
SONAME_BUMP_TRUE = @SONAME_BUMP_TRUE@
SSL_ENABLED = @SSL_ENABLED@
STATICLIB_FALSE = @STATICLIB_FALSE@
STATICLIB_TRUE = @STATICLIB_TRUE@
STRIP = @STRIP@
SUPPORT_FEATURES = @SUPPORT_FEATURES@
SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
TEST_SERVER_LIBS = @TEST_SERVER_LIBS@
USE_ARES = @USE_ARES@
USE_AXTLS = @USE_AXTLS@
USE_CYASSL = @USE_CYASSL@
USE_EMBEDDED_ARES_FALSE = @USE_EMBEDDED_ARES_FALSE@
USE_EMBEDDED_ARES_TRUE = @USE_EMBEDDED_ARES_TRUE@
USE_GNUTLS = @USE_GNUTLS@
USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
USE_LIBRTMP = @USE_LIBRTMP@
USE_LIBSSH2 = @USE_LIBSSH2@
USE_MANUAL_FALSE = @USE_MANUAL_FALSE@
USE_MANUAL_TRUE = @USE_MANUAL_TRUE@
USE_NSS = @USE_NSS@
USE_OPENLDAP = @USE_OPENLDAP@
USE_POLARSSL = @USE_POLARSSL@
USE_SSLEAY = @USE_SSLEAY@
USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
VERSION = @VERSION@
VERSIONED_FLAVOUR = @VERSIONED_FLAVOUR@
VERSIONED_SYMBOLS_FALSE = @VERSIONED_SYMBOLS_FALSE@
VERSIONED_SYMBOLS_TRUE = @VERSIONED_SYMBOLS_TRUE@
VERSIONNUM = @VERSIONNUM@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libext = @libext@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I m4
CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in		\
CMake/CurlCheckCSourceCompiles.cmake CMake/CurlCheckCSourceRuns.cmake	\
CMake/CurlTests.c CMake/FindOpenSSL.cmake CMake/FindZLIB.cmake		\
CMake/OtherTests.cmake CMake/Platforms/WindowsCache.cmake		\
CMake/Utilities.cmake include/curl/curlbuild.h.cmake

WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat	\
winbuild/MakefileBuild.vc winbuild/Makefile.vc

EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in	\
 curl-style.el sample.emacs RELEASE-NOTES buildconf 	\
 libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST)	\
 Makefile.msvc.names $(WINBUILD_DIST) lib/libcurl.vers.in

bin_SCRIPTS = curl-config
SUBDIRS = lib src include
DIST_SUBDIRS = $(SUBDIRS) tests packages docs
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libcurl.pc
all: all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f $$d$$p; then \
	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
	  else :; fi; \
	done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
	done

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkdir_p) $(distdir)/. $(distdir)/CMake $(distdir)/CMake/Platforms $(distdir)/include/curl $(distdir)/lib $(distdir)/m4 $(distdir)/packages/AIX/RPM $(distdir)/packages/EPM $(distdir)/packages/Linux/RPM $(distdir)/winbuild
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am: install-pkgconfigDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-exec-am: install-binSCRIPTS

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-info-am \
	uninstall-pkgconfigDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-am clean clean-generic clean-libtool clean-local \
	clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \
	distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-binSCRIPTS install-data \
	install-data-am install-data-hook install-exec install-exec-am \
	install-info install-info-am install-man install-pkgconfigDATA \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-binSCRIPTS uninstall-hook uninstall-info-am \
	uninstall-pkgconfigDATA


dist-hook:
	rm -rf $(top_builddir)/tests/log
	find $(distdir) -name "*.dist" -exec rm {} \;
	(distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
	for file in $$distit; do \
	  strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
	  cp $$file $(distdir)$$strip; \
	done)

html:
	cd docs; make html

pdf:
	cd docs; make pdf

check: test examples

@CROSSCOMPILING_TRUE@test-full: test
@CROSSCOMPILING_TRUE@test-torture: test

@CROSSCOMPILING_TRUE@test:
@CROSSCOMPILING_TRUE@	@echo "NOTICE: we can't run the tests when cross-compiling!"

@CROSSCOMPILING_FALSE@test:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all quiet-test)

@CROSSCOMPILING_FALSE@test-full:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all full-test)

@CROSSCOMPILING_FALSE@test-torture:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all torture-test)

examples:
	@(cd docs/examples; $(MAKE) check)

clean-local:
	@(cd tests; $(MAKE) clean)
	@(cd docs; $(MAKE) clean)

#
# Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
# must contain the following line:
# %_topdir /home/loic/local/rpm
# and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
#
# cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
#
# If additional configure flags are needed to build the package, add the
# following in ~/.rpmmacros
# %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
# and run make rpm in the following way:
# AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
#

rpms:
	$(MAKE) RPMDIST=curl rpm
	$(MAKE) RPMDIST=curl-ssl rpm

rpm:
	RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
	cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
	cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
	rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
	mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
	mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .

#
# Build a Solaris pkgadd format file
# run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
# file (which ends up back in this directory).
# The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
# pkgadd -d ./HAXXcurl-*
#

# gak - libtool requires an absoulte directory, hence the pwd below...
pkgadd:
	umask 022 ; \
	make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
	cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
	cd $(srcdir)/packages/Solaris && $(MAKE) package

#
# Build a cygwin binary tarball installation file
# resulting .tar.bz2 file will end up at packages/Win32/cygwin
cygwinbin:
	$(MAKE) -C packages/Win32/cygwin cygwinbin

# We extend the standard install with a custom hook:
install-data-hook:
	cd include && $(MAKE) install
	cd docs && $(MAKE) install

# We extend the standard uninstall with a custom hook:
uninstall-hook:
	cd include && $(MAKE) uninstall
	cd docs && $(MAKE) uninstall

ca-bundle: lib/mk-ca-bundle.pl
	@echo "generate a fresh ca-bundle.crt"
	@perl $< -b -l -u lib/ca-bundle.crt

ca-firefox: lib/firefox-db2pem.sh
	@echo "generate a fresh ca-bundle.crt"
	./lib/firefox-db2pem.sh lib/ca-bundle.crt

checksrc:
	cd lib && $(MAKE) checksrc
	cd src && $(MAKE) checksrc
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: