blob: ac1ba11f5a0040b28ad586129864bf0f9b173596 [file] [log] [blame] [edit]
/*
* UART Masks
*/
#ifndef __BFIN_PERIPHERAL_UART__
#define __BFIN_PERIPHERAL_UART__
/* UARTx_LCR Masks */
#define WLS 0x03 /* Word Length Select */
#define WLS_5 0x00 /* 5 bit word */
#define WLS_6 0x01 /* 6 bit word */
#define WLS_7 0x02 /* 7 bit word */
#define WLS_8 0x03 /* 8 bit word */
#define STB 0x04 /* Stop Bits */
#define PEN 0x08 /* Parity Enable */
#define EPS 0x10 /* Even Parity Select */
#define STP 0x20 /* Stick Parity */
#define SB 0x40 /* Set Break */
#define DLAB 0x80 /* Divisor Latch Access */
#define DLAB_P 0x07
#define SB_P 0x06
#define STP_P 0x05
#define EPS_P 0x04
#define PEN_P 0x03
#define STB_P 0x02
#define WLS_P1 0x01
#define WLS_P0 0x00
/* UARTx_MCR Mask */
#define XOFF 0x01 /* Transmitter off */
#define MRTS 0x02 /* Manual Request to Send */
#define RFIT 0x04 /* Receive FIFO IRQ Threshold */
#define RFRT 0x08 /* Receive FIFO RTS Threshold */
#define LOOP_ENA 0x10 /* Loopback Mode Enable */
#define FCPOL 0x20 /* Flow Control Pin Polarity */
#define ARTS 0x40 /* Auto RTS generation for RX handshake */
#define ACTS 0x80 /* Auto CTS operation for TX handshake */
#define XOFF_P 0
#define MRTS_P 1
#define RFIT_P 2
#define RFRT_P 3
#define LOOP_ENA_P 4
#define FCPOL_P 5
#define ARTS_P 6
#define ACTS_P 7
/* UARTx_LSR Masks */
#define DR 0x01 /* Data Ready */
#define OE 0x02 /* Overrun Error */
#define PE 0x04 /* Parity Error */
#define FE 0x08 /* Framing Error */
#define BI 0x10 /* Break Interrupt */
#define THRE 0x20 /* THR Empty */
#define TEMT 0x40 /* TSR and UART_THR Empty */
#define DR_P 0x00
#define OE_P 0x01
#define PE_P 0x02
#define FE_P 0x03
#define BI_P 0x04
#define THRE_P 0x05
#define TEMT_P 0x06
/* UARTx_IER Masks */
#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
#define ELSI 0x04 /* Enable RX Status Interrupt */
#define ERBFI_P 0x00
#define ETBEI_P 0x01
#define ELSI_P 0x02
/* UARTx_IIR Masks */
#define NINT 0x01 /* Pending Interrupt */
#define STATUS 0x06 /* Highest Priority Pending Interrupt */
#define NINT_P 0x00
#define STATUS_P0 0x01
#define STATUS_P1 0x02
/* UARTx_GCTL Masks */
#define UCEN 0x01 /* Enable UARTx Clocks */
#define IREN 0x02 /* Enable IrDA Mode */
#define TPOLC 0x04 /* IrDA TX Polarity Change */
#define RPOLC 0x08 /* IrDA RX Polarity Change */
#define FPE 0x10 /* Force Parity Error On Transmit */
#define FFE 0x20 /* Force Framing Error On Transmit */
#define UCEN_P 0x00
#define IREN_P 0x01
#define TPOLC_P 0x02
#define RPOLC_P 0x03
#define FPE_P 0x04
#define FFE_P 0x05
#endif