blob: 96a1e474a57c38d87e900d4a1b187677a0d915c6 [file] [log] [blame]
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Modified 4/5/2001
* Wait for completion of each sector erase command issued
* 4/5/2001
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
/*
* Modified July 20, 2001
* Strip down to support ONLY the AMD29F032B.
* Dave Updegraff - Cray, Inc. dave@cray.com
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
/* The flash chip we use... */
#define AMD_ID_F032B 0x41 /* 29F032B ID 32 Mbit,64 64Kx8 sectors */
#define FLASH_AM320B 0x0009
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_word (flash_info_t *info, ulong dest, ulong data);
static void flash_get_offsets (ulong base, flash_info_t *info);
#define ADDR0 0x5555
#define ADDR1 0x2aaa
#define FLASH_WORD_SIZE unsigned char
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Only one bank */
if (CONFIG_SYS_MAX_FLASH_BANKS == 1)
{
/* Setup offsets */
flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
#if 0
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
FLASH_BASE0_PRELIM,
FLASH_BASE0_PRELIM+monitor_flash_len-1,
&flash_info[0]);
#endif
size_b1 = 0 ;
flash_info[0].size = size_b0;
}
return (size_b0 + size_b1);
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t *info)
{
int i;
/* set up sector start address table */
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00010000);
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
int k;
int size;
int erased;
volatile unsigned long *flash;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AM320B:printf ("AM29F032B (32 Mbit 64x64KB uniform sectors)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
/*
* Check if whole sector is erased
*/
if (i != (info->sector_count-1))
size = info->start[i+1] - info->start[i];
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k=0; k<size; k++)
{
if (*flash++ != 0xffffffff)
{
erased = 0;
break;
}
}
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s%s",
info->start[i],
erased ? " E" : " ",
info->protect[i] ? "RO " : " "
);
}
printf ("\n");
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
{
short i;
FLASH_WORD_SIZE value;
ulong base = (ulong)addr;
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
/* Write auto select command: read Manufacturer ID */
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
value = addr2[0];
switch (value) {
case (FLASH_WORD_SIZE)AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr2[1]; /* device ID */
switch (value) {
case (FLASH_WORD_SIZE)AMD_ID_F032B:
info->flash_id += FLASH_AM320B;
info->sector_count = 64;
info->size = 0x0400000; /* => 4 MB */
break;
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/* set up sector start address table */
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00010000);
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
info->protect[i] = addr2[2] & 1;
}
/*
* Prevent writes to uninitialized FLASH.
*/
if (info->flash_id != FLASH_UNKNOWN) {
addr2 = (FLASH_WORD_SIZE *)info->start[0];
*addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
}
return (info->size);
}
int wait_for_DQ7(flash_info_t *info, int sect)
{
ulong start, now, last;
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
start = get_timer (0);
last = start;
while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return -1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
return 0;
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
volatile FLASH_WORD_SIZE *addr2;
int flag, prot, sect;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if (info->flash_id == FLASH_UNKNOWN) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
printf("Erasing sector %p\n", addr2);
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
/*
* Wait for each sector to complete, it's more
* reliable. According to AMD Spec, you must
* issue all erase commands within a specified
* timeout. This has been seen to fail, especially
* if printf()s are included (for debug)!!
*/
wait_for_DQ7(info, sect);
}
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
/* reset to read mode */
addr = (FLASH_WORD_SIZE *)info->start[0];
addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
printf (" done\n");
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
for (; i<4 && cnt>0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = 0;
for (i=0; i<4; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
return (write_word(info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
ulong start;
int flag;
int i;
/* Check if Flash is (sufficiently) erased */
if ((*((volatile FLASH_WORD_SIZE *)dest) &
(FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
{
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
dest2[i] = data2[i];
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
}
return (0);
}
/*-----------------------------------------------------------------------
*/