blob: 0e51bd1c891246fef70cded4900441a1bec66472 [file] [log] [blame] [edit]
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
#include <post.h>
#include "../common/kup.h"
#include <asm/io.h>
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, /* last */
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/*
* Check Board Identity:
*/
int checkboard(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
uchar latch, rev, mod;
/*
* Init ChipSelect #4 (CAN + HW-Latch)
*/
out_be32(&memctl->memc_or4, 0xFFFF8926);
out_be32(&memctl->memc_br4, 0x90000401);
latch = in_8( (unsigned char *) LATCH_ADDR);
rev = (latch & 0xF8) >> 3;
mod = (latch & 0x03);
printf("Board: KUP4X Rev %d.%d\n", rev, mod);
return 0;
}
phys_size_t initdram(int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
upmconfig(UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
out_be32(&memctl->memc_mar, 0x00000088);
out_be32(&memctl->memc_mamr,
CONFIG_SYS_MAMR & (~(MAMR_PTAE))); /* no refresh yet */
udelay(200);
/* perform SDRAM initializsation sequence */
/* SDRAM bank 0 */
out_be32(&memctl->memc_mcr, 0x80002105);
udelay(1);
out_be32(&memctl->memc_mcr, 0x80002830); /* execute twice */
udelay(1);
out_be32(&memctl->memc_mcr, 0x80002106); /* RUN MRS Pattern from loc 6 */
udelay(1);
/* SDRAM bank 1 */
out_be32(&memctl->memc_mcr, 0x80004105);
udelay(1);
out_be32(&memctl->memc_mcr, 0x80004830); /* execute twice */
udelay(1);
out_be32(&memctl->memc_mcr, 0x80004106); /* RUN MRS Pattern from loc 6 */
udelay(1);
/* SDRAM bank 2 */
out_be32(&memctl->memc_mcr, 0x80006105);
udelay(1);
out_be32(&memctl->memc_mcr, 0x80006830); /* execute twice */
udelay(1);
out_be32(&memctl->memc_mcr, 0x80006106); /* RUN MRS Pattern from loc 6 */
udelay(1);
/* SDRAM bank 3 */
out_be32(&memctl->memc_mcr, 0x8000C105);
udelay(1);
out_be32(&memctl->memc_mcr, 0x8000C830); /* execute twice */
udelay(1);
out_be32(&memctl->memc_mcr, 0x8000C106); /* RUN MRS Pattern from loc 6 */
udelay(1);
setbits_be32(&memctl->memc_mamr, MAMR_PTAE); /* enable refresh */
udelay(1000);
/* 4 x 16 MB */
out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
udelay(1000);
out_be32(&memctl->memc_or1, 0xFF000A00);
out_be32(&memctl->memc_br1, 0x00000081);
out_be32(&memctl->memc_or2, 0xFE000A00);
out_be32(&memctl->memc_br2, 0x01000081);
out_be32(&memctl->memc_or3, 0xFD000A00);
out_be32(&memctl->memc_br3, 0x02000081);
out_be32(&memctl->memc_or6, 0xFC000A00);
out_be32(&memctl->memc_br6, 0x03000081);
udelay(10000);
return (4 * 16 * 1024 * 1024);
}
int misc_init_r(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#ifdef CONFIG_IDE_LED
/* Configure PA8 as output port */
setbits_be16(&immap->im_ioport.iop_padir, PA_8);
setbits_be16(&immap->im_ioport.iop_paodr, PA_8);
clrbits_be16(&immap->im_ioport.iop_papar, PA_8);
setbits_be16(&immap->im_ioport.iop_padat, PA_8); /* turn it off */
#endif
load_sernum_ethaddr();
setenv("hw", "4x");
poweron_key();
return 0;
}