blob: 15f8f3163d7fac3ed0a0577bd1d2273bda7245be [file] [log] [blame] [edit]
/*
* (C) Copyright 2009, 2010 Wolfgang Denk <wd@denx.de>
*
* (C) Copyright 2009-2010
* Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/bitops.h>
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/mpc512x.h>
#include <fdt_support.h>
#include <flash.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
#include <serial.h>
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[];
ulong flash_get_size (phys_addr_t base, int banknum);
sdram_conf_t mddrc_config[] = {
{
(512 << 20), /* 512 MB RAM configuration */
{
CONFIG_SYS_MDDRC_SYS_CFG,
CONFIG_SYS_MDDRC_TIME_CFG0,
CONFIG_SYS_MDDRC_TIME_CFG1,
CONFIG_SYS_MDDRC_TIME_CFG2
}
},
{
(128 << 20), /* 128 MB RAM configuration */
{
CONFIG_SYS_MDDRC_SYS_CFG_ALT1,
CONFIG_SYS_MDDRC_TIME_CFG0_ALT1,
CONFIG_SYS_MDDRC_TIME_CFG1_ALT1,
CONFIG_SYS_MDDRC_TIME_CFG2_ALT1
}
},
};
phys_size_t initdram (int board_type)
{
int i;
u32 msize = 0;
u32 pdm360ng_init_seq[] = {
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_MICRON_INIT_DEV_OP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_EM2,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_EM2,
CONFIG_SYS_DDRCMD_EM3,
CONFIG_SYS_DDRCMD_EN_DLL,
CONFIG_SYS_DDRCMD_RES_DLL,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_MICRON_INIT_DEV_OP,
CONFIG_SYS_DDRCMD_OCD_DEFAULT,
CONFIG_SYS_DDRCMD_OCD_EXIT,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_NOP
};
for (i = 0; i < ARRAY_SIZE(mddrc_config); i++) {
msize = fixed_sdram(&mddrc_config[i].cfg, pdm360ng_init_seq,
ARRAY_SIZE(pdm360ng_init_seq));
if (msize == mddrc_config[i].size)
break;
}
return msize;
}
static int set_lcd_brightness(char *);
int misc_init_r(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
/*
* Re-configure flash setup using auto-detected info
*/
if (flash_info[1].size > 0) {
out_be32(&im->sysconf.lpcs1aw,
CSAW_START(gd->bd->bi_flashstart + flash_info[1].size) |
CSAW_STOP(gd->bd->bi_flashstart + flash_info[1].size,
flash_info[1].size));
sync_law(&im->sysconf.lpcs1aw);
/*
* Re-check to get correct base address
*/
flash_get_size (gd->bd->bi_flashstart + flash_info[1].size, 1);
} else {
/* Disable Bank 1 */
out_be32(&im->sysconf.lpcs1aw, 0x01000100);
sync_law(&im->sysconf.lpcs1aw);
}
out_be32(&im->sysconf.lpcs0aw,
CSAW_START(gd->bd->bi_flashstart) |
CSAW_STOP(gd->bd->bi_flashstart, flash_info[0].size));
sync_law(&im->sysconf.lpcs0aw);
/*
* Re-check to get correct base address
*/
flash_get_size (gd->bd->bi_flashstart, 0);
/*
* Re-do flash protection upon new addresses
*/
flash_protect (FLAG_PROTECT_CLEAR,
gd->bd->bi_flashstart, 0xffffffff,
&flash_info[0]);
/* Monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[0]);
/* Environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
&flash_info[0]);
#ifdef CONFIG_ENV_ADDR_REDUND
/* Redundant environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR_REDUND,
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
&flash_info[0]);
#endif
#ifdef CONFIG_FSL_DIU_FB
set_lcd_brightness(0);
/* Switch LCD-Backlight and LVDS-Interface on */
setbits_be32(&im->gpio.gpdir, 0x01040000);
clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000);
#endif
#if defined(CONFIG_HARD_I2C)
if (!getenv("ethaddr")) {
uchar buf[6];
uchar ifm_oui[3] = { 0, 2, 1, };
int ret;
/* I2C-0 for on-board eeprom */
i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM);
/* Read ethaddr from EEPROM */
ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6);
if (ret != 0) {
printf("Error: Unable to read MAC from I2C"
" EEPROM at address %02X:%02X\n",
CONFIG_SYS_I2C_EEPROM_ADDR,
CONFIG_SYS_I2C_EEPROM_MAC_OFFSET);
return 1;
}
/* Owned by IFM ? */
if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) {
printf("Illegal MAC address in EEPROM: %pM\n", buf);
return 1;
}
eth_setenv_enetaddr("ethaddr", buf);
}
#endif /* defined(CONFIG_HARD_I2C) */
return 0;
}
static iopin_t ioregs_init[] = {
/* FUNC1=LPC_CS4 */
{
offsetof(struct ioctrl512x, io_control_pata_ce1), 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=GPIO10 */
{
offsetof(struct ioctrl512x, io_control_pata_ce2), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC1=CAN3_TX */
{
offsetof(struct ioctrl512x, io_control_pata_isolate), 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO14 */
{
offsetof(struct ioctrl512x, io_control_pata_iochrdy), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC2=DIU_LD22 Sets Next 2 to DIU_LD pads */
/* DIU_LD22-DIU_LD23 */
{
offsetof(struct ioctrl512x, io_control_pci_ad31), 2, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC2=USB1_DATA7 Sets Next 12 to USB1 pads */
/* USB1_DATA7-USB1_DATA0, USB1_STOP, USB1_NEXT, USB1_CLK, USB1_DIR */
{
offsetof(struct ioctrl512x, io_control_pci_ad29), 12, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC1=VIU_DATA0 Sets Next 3 to VIU_DATA pads */
/* VIU_DATA0-VIU_DATA2 */
{
offsetof(struct ioctrl512x, io_control_pci_ad17), 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC2=FEC_TXD_0 */
{
offsetof(struct ioctrl512x, io_control_pci_ad14), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC1=VIU_DATA3 Sets Next 2 to VIU_DATA pads */
/* VIU_DATA3, VIU_DATA4 */
{
offsetof(struct ioctrl512x, io_control_pci_ad13), 2, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC2=FEC_RXD_1 Sets Next 12 to FEC pads */
/* FEC_RXD_1, FEC_RXD_0, FEC_RX_CLK, FEC_TX_CLK, FEC_RX_ER, FEC_RX_DV */
/* FEC_TX_EN, FEC_TX_ER, FEC_CRS, FEC_MDC, FEC_MDIO, FEC_COL */
{
offsetof(struct ioctrl512x, io_control_pci_ad11), 12, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC2=DIU_LD03 Sets Next 25 to DIU pads */
/* DIU_LD00-DIU_LD21 */
{
offsetof(struct ioctrl512x, io_control_pci_cbe0), 22, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
},
/* FUNC2=DIU_CLK Sets Next 3 to DIU pads */
/* DIU_CLK, DIU_VSYNC, DIU_HSYNC */
{
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC2=CAN3_RX */
{
offsetof(struct ioctrl512x, io_control_irq1), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* Sets lowest slew on 2 CAN_TX Pins*/
{
offsetof(struct ioctrl512x, io_control_can1_tx), 2, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=CAN4_TX Sets Next 2 to CAN4 pads */
/* CAN4_TX, CAN4_RX */
{
offsetof(struct ioctrl512x, io_control_j1850_tx), 2, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO8 Sets Next 2 to GPIO pads */
/* GPIO8, GPIO9 */
{
offsetof(struct ioctrl512x, io_control_psc0_0), 2, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC1=FEC_TXD_1 Sets Next 3 to FEC pads */
/* FEC_TXD_1, FEC_TXD_2, FEC_TXD_3 */
{
offsetof(struct ioctrl512x, io_control_psc0_4), 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=FEC_RXD_3 Sets Next 2 to FEC pads */
/* FEC_RXD_3, FEC_RXD_2 */
{
offsetof(struct ioctrl512x, io_control_psc1_4), 2, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=GPIO17 */
{
offsetof(struct ioctrl512x, io_control_psc2_1), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO2/GPT2 Sets Next 3 to GPIO pads */
/* GPIO2, GPIO20, GPIO21 */
{
offsetof(struct ioctrl512x, io_control_psc2_4), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC2=VIU_PIX_CLK */
{
offsetof(struct ioctrl512x, io_control_psc3_4), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=GPIO24 Sets Next 2 to GPIO pads */
/* GPIO24, GPIO25 */
{
offsetof(struct ioctrl512x, io_control_psc4_0), 2, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC1=NFC_CE2 */
{
offsetof(struct ioctrl512x, io_control_psc4_4), 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC2=VIU_DATA5 Sets Next 5 to VIU_DATA pads */
/* VIU_DATA5-VIU_DATA9 */
{
offsetof(struct ioctrl512x, io_control_psc5_0), 5, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=LPC_TSIZ1 Sets Next 2 to LPC_TSIZ pads */
/* LPC_TSIZ1-LPC_TSIZ2 */
{
offsetof(struct ioctrl512x, io_control_psc6_0), 2, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=LPC_TS */
{
offsetof(struct ioctrl512x, io_control_psc6_4), 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=GPIO16 */
{
offsetof(struct ioctrl512x, io_control_psc7_0), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO18 Sets Next 3 to GPIO pads */
/* GPIO18-GPIO19, GPT7/GPIO7 */
{
offsetof(struct ioctrl512x, io_control_psc7_2), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO0/GPT0 */
{
offsetof(struct ioctrl512x, io_control_psc8_4), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC3=GPIO11 Sets Next 4 to GPIO pads */
/* GPIO11, GPIO2, GPIO12, GPIO13 */
{
offsetof(struct ioctrl512x, io_control_psc10_3), 4, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
},
/* FUNC2=DIU_DE */
{
offsetof(struct ioctrl512x, io_control_psc11_4), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
}
};
int checkboard (void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
puts("Board: PDM360NG\n");
/* initialize function mux & slew rate IO inter alia on IO Pins */
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
/* initialize IO_CONTROL_GP (GPIO/GPT-mux-register) */
setbits_be32(&im->io_ctrl.io_control_gp,
(1 << 0) | /* GP_MUX7->GPIO7 */
(1 << 5)); /* GP_MUX2->GPIO2 */
/* configure GPIO24 (VIU_CE), output/high */
setbits_be32(&im->gpio.gpdir, 0x80);
setbits_be32(&im->gpio.gpdat, 0x80);
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
struct node_info nodes[] = {
{ "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, },
{ "cfi-flash", MTD_DEV_TYPE_NOR, },
};
#endif
#if defined(CONFIG_VIDEO)
/*
* EDID block has been generated using Phoenix EDID Designer 1.3.
* This tool creates a text file containing:
*
* EDID BYTES:
* 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
* ------------------------------------------------
* 00 | 00 FF FF FF FF FF FF 00 42 C9 34 12 01 00 00 00
* 10 | 0A 0C 01 03 80 98 5B 78 CA 7E 50 A0 58 4E 96 25
* 20 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
* 30 | 01 01 01 01 01 01 80 0C 20 00 31 E0 2D 10 2A 80
* 40 | 12 08 30 E4 10 00 00 18 00 00 00 FD 00 38 3C 1F
* 50 | 3C 04 0A 20 20 20 20 20 20 20 00 00 00 FF 00 50
* 60 | 4D 30 37 30 57 4C 33 0A 0A 0A 0A 0A 00 00 00 FF
* 70 | 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D4
*
* Then this data has been manually converted to the char
* array below.
*/
static unsigned char edid_buf[128] = {
0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x42, 0xC9, 0x34, 0x12, 0x01, 0x00, 0x00, 0x00,
0x0A, 0x0C, 0x01, 0x03, 0x80, 0x98, 0x5B, 0x78,
0xCA, 0x7E, 0x50, 0xA0, 0x58, 0x4E, 0x96, 0x25,
0x1E, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x0C,
0x20, 0x00, 0x31, 0xE0, 0x2D, 0x10, 0x2A, 0x80,
0x12, 0x08, 0x30, 0xE4, 0x10, 0x00, 0x00, 0x18,
0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x3C, 0x1F,
0x3C, 0x04, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x50,
0x4D, 0x30, 0x37, 0x30, 0x57, 0x4C, 0x33, 0x0A,
0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0xFF,
0x00, 0x41, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x00, 0xD4,
};
#endif
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[8];
int rc, i = 0;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
#if defined(CONFIG_VIDEO)
fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf);
#endif
/* Fixup NOR FLASH mapping */
val[i++] = 0; /* chip select number */
val[i++] = 0; /* always 0 */
val[i++] = gd->bd->bi_flashstart;
val[i++] = gd->bd->bi_flashsize;
/* Fixup MRAM mapping */
val[i++] = 2; /* chip select number */
val[i++] = 0; /* always 0 */
val[i++] = CONFIG_SYS_MRAM_BASE;
val[i++] = CONFIG_SYS_MRAM_SIZE;
rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
val, i * sizeof(u32), 1);
if (rc)
printf("Unable to update localbus ranges, err=%s\n",
fdt_strerror(rc));
/* Fixup reg property in NOR Flash node */
i = 0;
val[i++] = 0; /* always 0 */
val[i++] = 0; /* start at offset 0 */
val[i++] = flash_info[0].size; /* size of Bank 0 */
/* Second Bank available? */
if (flash_info[1].size > 0) {
val[i++] = 0; /* always 0 */
val[i++] = flash_info[0].size; /* offset of Bank 1 */
val[i++] = flash_info[1].size; /* size of Bank 1 */
}
rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg",
val, i * sizeof(u32), 1);
if (rc)
printf("Unable to update flash reg property, err=%s\n",
fdt_strerror(rc));
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/*
* If argument is NULL, set the LCD brightness to the
* value from "brightness" environment variable. Set
* the LCD brightness to the value specified by the
* argument otherwise. Default brightness is zero.
*/
#define MAX_BRIGHTNESS 99
static int set_lcd_brightness(char *brightness)
{
struct stdio_dev *cop_port;
char *env;
char cmd_buf[20];
int val = 0;
int cs = 0;
int len, i;
if (brightness) {
val = simple_strtol(brightness, NULL, 10);
} else {
env = getenv("brightness");
if (env)
val = simple_strtol(env, NULL, 10);
}
if (val < 0)
val = 0;
if (val > MAX_BRIGHTNESS)
val = MAX_BRIGHTNESS;
sprintf(cmd_buf, "$SB;%04d;", val);
len = strlen(cmd_buf);
for (i = 1; i <= len; i++)
cs += cmd_buf[i];
cs = (~cs + 1) & 0xff;
sprintf(cmd_buf + len, "%02X\n", cs);
/* IO Coprocessor communication */
cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
if (!cop_port) {
printf("Error: Can't open IO Coprocessor port.\n");
return -1;
}
debug("%s: cmd: %s", __func__, cmd_buf);
write_port(cop_port, cmd_buf);
/*
* Wait for transmission and maybe response data
* before closing the port.
*/
udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
memset(cmd_buf, 0, sizeof(cmd_buf));
len = read_port(cop_port, cmd_buf, sizeof(cmd_buf));
if (len)
printf("Error: %s\n", cmd_buf);
close_port(4);
return 0;
}
static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
if (argc < 2)
return cmd_usage(cmdtp);
return set_lcd_brightness(argv[1]);
}
U_BOOT_CMD(lcdbr, 2, 1, cmd_lcd_brightness,
"set LCD brightness",
"<brightness> - set LCD backlight level to <brightness>.\n"
);