/*
  Copyright 2008 Intel Corporation
 
  Use, modification and distribution are subject to the Boost Software License,
  Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at
  http://www.boost.org/LICENSE_1_0.txt).
*/
#ifndef BOOST_POLYGON_POLYGON_TRAITS_HPP
#define BOOST_POLYGON_POLYGON_TRAITS_HPP
namespace boost { namespace polygon{

  template <typename T, typename enable = gtl_yes>
  struct polygon_90_traits {
    typedef typename T::coordinate_type coordinate_type;
    typedef typename T::compact_iterator_type compact_iterator_type;

    // Get the begin iterator
    static inline compact_iterator_type begin_compact(const T& t) {
      return t.begin_compact();
    }
  
    // Get the end iterator
    static inline compact_iterator_type end_compact(const T& t) {
      return t.end_compact();
    }
  
    // Get the number of sides of the polygon
    static inline std::size_t size(const T& t) {
      return t.size();
    }
  
    // Get the winding direction of the polygon
    static inline winding_direction winding(const T&) {
      return unknown_winding;
    }
  };

  template <typename T>
  struct polygon_traits_general {
    typedef typename T::coordinate_type coordinate_type;
    typedef typename T::iterator_type iterator_type;
    typedef typename T::point_type point_type;

    // Get the begin iterator
    static inline iterator_type begin_points(const T& t) {
      return t.begin();
    }
  
    // Get the end iterator
    static inline iterator_type end_points(const T& t) {
      return t.end();
    }
  
    // Get the number of sides of the polygon
    static inline std::size_t size(const T& t) {
      return t.size();
    }
  
    // Get the winding direction of the polygon
    static inline winding_direction winding(const T&) {
      return unknown_winding;
    }
  };

  template <typename T>
  struct polygon_traits_90 {
    typedef typename polygon_90_traits<T>::coordinate_type coordinate_type;
    typedef iterator_compact_to_points<typename polygon_90_traits<T>::compact_iterator_type, point_data<coordinate_type> > iterator_type;
    typedef point_data<coordinate_type> point_type;

    // Get the begin iterator
    static inline iterator_type begin_points(const T& t) {
      return iterator_type(polygon_90_traits<T>::begin_compact(t),
                           polygon_90_traits<T>::end_compact(t));
    }
  
    // Get the end iterator
    static inline iterator_type end_points(const T& t) {
      return iterator_type(polygon_90_traits<T>::end_compact(t),
                           polygon_90_traits<T>::end_compact(t));
    }
  
    // Get the number of sides of the polygon
    static inline std::size_t size(const T& t) {
      return polygon_90_traits<T>::size(t);
    }
  
    // Get the winding direction of the polygon
    static inline winding_direction winding(const T& t) {
      return polygon_90_traits<T>::winding(t);
    }
  };

#ifndef BOOST_VERY_LITTLE_SFINAE

  template <typename T, typename enable = gtl_yes>
  struct polygon_traits {};

  template <typename T>
  struct polygon_traits<T, 
                        typename gtl_or_4<
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_45_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_with_holes_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_45_with_holes_concept>::type
  >::type> : public polygon_traits_general<T> {};

  template <typename T>
  struct polygon_traits< T, 
                         typename gtl_or<
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_with_holes_concept>::type
  >::type > : public polygon_traits_90<T> {};

#else

  template <typename T, typename T_IF, typename T_ELSE>
  struct gtl_ifelse {};
  template <typename T_IF, typename T_ELSE>
  struct gtl_ifelse<gtl_no, T_IF, T_ELSE> {
    typedef T_ELSE type;
  };
  template <typename T_IF, typename T_ELSE>
  struct gtl_ifelse<gtl_yes, T_IF, T_ELSE> {
    typedef T_IF type;
  };

  template <typename T, typename enable = gtl_yes>
  struct polygon_traits {};

  template <typename T>
  struct polygon_traits<T, typename gtl_or<typename gtl_or_4<
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_45_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_with_holes_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_45_with_holes_concept>::type
  >::type, typename gtl_or<
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_with_holes_concept>::type
  >::type>::type > : public gtl_ifelse<typename gtl_or<
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_concept>::type,
    typename gtl_same_type<typename geometry_concept<T>::type, polygon_90_with_holes_concept>::type >::type,
      polygon_traits_90<T>,
      polygon_traits_general<T> >::type {
  };

#endif

  template <typename T, typename enable = void>
  struct polygon_with_holes_traits {
    typedef typename T::iterator_holes_type iterator_holes_type;
    typedef typename T::hole_type hole_type;

    // Get the begin iterator
    static inline iterator_holes_type begin_holes(const T& t) {
      return t.begin_holes();
    }

    // Get the end iterator
    static inline iterator_holes_type end_holes(const T& t) {
      return t.end_holes();
    }

    // Get the number of holes 
    static inline std::size_t size_holes(const T& t) {
      return t.size_holes();
    }
  };

  template <typename T, typename enable = void>
  struct polygon_90_mutable_traits {
  
    // Set the data of a polygon with the unique coordinates in an iterator, starting with an x
    template <typename iT>
    static inline T& set_compact(T& t, iT input_begin, iT input_end) {
      t.set_compact(input_begin, input_end);
      return t;
    }
  
  };

  template <typename T>
  struct polygon_90_mutable_traits<T, typename gtl_same_type<polygon_concept, typename geometry_concept<T>::type>::type> {
    // Set the data of a polygon with the unique coordinates in an iterator, starting with an x
    template <typename iT>
    static inline T& set_compact(T& t, iT input_begin, iT input_end) {
      typedef iterator_points_to_compact<iT, typename polygon_traits<T>::point_type> iTp;
      t.set_points(iTp(polygon_traits<T>::begin_points(t)), iTp(polygon_traits<T>::end_points(t)));
      return t;
    }
  };

  template <typename T, typename enable = void>
  struct polygon_mutable_traits {

    // Set the data of a polygon with the unique coordinates in an iterator, starting with an x
    template <typename iT>
    static inline T& set_points(T& t, iT input_begin, iT input_end) {
      t.set(input_begin, input_end);
      return t;
    }
  
  };

  template <typename T, typename enable = void>
  struct polygon_with_holes_mutable_traits {

    // Set the data of a polygon with the unique coordinates in an iterator, starting with an x
    template <typename iT>
    static inline T& set_holes(T& t, iT inputBegin, iT inputEnd) {
      t.set_holes(inputBegin, inputEnd);
      return t;
    }

  };
}
}
#include "isotropy.hpp"

//point
#include "point_data.hpp"
#include "point_traits.hpp"
#include "point_concept.hpp"

//interval
#include "interval_data.hpp"
#include "interval_traits.hpp"
#include "interval_concept.hpp"

//rectangle
#include "rectangle_data.hpp"
#include "rectangle_traits.hpp"
#include "rectangle_concept.hpp"

//algorithms needed by polygon types
#include "detail/iterator_points_to_compact.hpp"
#include "detail/iterator_compact_to_points.hpp"

//polygons
#include "polygon_45_data.hpp"
#include "polygon_data.hpp"
#include "polygon_90_data.hpp"
#include "polygon_90_with_holes_data.hpp"
#include "polygon_45_with_holes_data.hpp"
#include "polygon_with_holes_data.hpp"

namespace boost { namespace polygon{
  struct polygon_concept {};
  struct polygon_with_holes_concept {};
  struct polygon_45_concept {};
  struct polygon_45_with_holes_concept {};
  struct polygon_90_concept {};
  struct polygon_90_with_holes_concept {};
  

  template <typename T>
  struct is_polygon_90_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_90_concept, GC>::type type;
  };

  template <typename T>
  struct is_polygon_45_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_or<typename is_polygon_90_type<T>::type,
                            typename gtl_same_type<polygon_45_concept, GC>::type>::type type;
  };

  template <typename T>
  struct is_polygon_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_or<typename is_polygon_45_type<T>::type,
                            typename gtl_same_type<polygon_concept, GC>::type>::type type;
  };
  
  template <typename T>
  struct is_polygon_90_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_or<typename is_polygon_90_type<T>::type,
                            typename gtl_same_type<polygon_90_with_holes_concept, GC>::type>::type type;
  };

  template <typename T>
  struct is_polygon_45_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_or_3<typename is_polygon_90_with_holes_type<T>::type,
                              typename is_polygon_45_type<T>::type, 
                              typename gtl_same_type<polygon_45_with_holes_concept, GC>::type>::type type;
  };

  template <typename T>
  struct is_polygon_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_or_3<typename is_polygon_45_with_holes_type<T>::type,
                              typename is_polygon_type<T>::type, 
                              typename gtl_same_type<polygon_with_holes_concept, GC>::type>::type type;
  };

  template <typename T>
  struct is_mutable_polygon_90_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_90_concept, GC>::type type;
  };
  
  template <typename T>
  struct is_mutable_polygon_45_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_45_concept, GC>::type type;
  };

  template <typename T>
  struct is_mutable_polygon_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_concept, GC>::type type;
  };
  
  template <typename T>
  struct is_mutable_polygon_90_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_90_with_holes_concept, GC>::type type;
  };

  template <typename T>
  struct is_mutable_polygon_45_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_45_with_holes_concept, GC>::type type;
  };

  template <typename T>
  struct is_mutable_polygon_with_holes_type {
    typedef typename geometry_concept<T>::type GC;
    typedef typename gtl_same_type<polygon_with_holes_concept, GC>::type type;
  };

  template <typename T>
  struct is_any_mutable_polygon_with_holes_type {
    typedef typename gtl_or_3<typename is_mutable_polygon_90_with_holes_type<T>::type,
                              typename is_mutable_polygon_45_with_holes_type<T>::type,
                              typename is_mutable_polygon_with_holes_type<T>::type>::type type;
  };
  template <typename T>
  struct is_any_mutable_polygon_without_holes_type {
    typedef typename gtl_or_3<
      typename is_mutable_polygon_90_type<T>::type, 
      typename is_mutable_polygon_45_type<T>::type, 
      typename is_mutable_polygon_type<T>::type>::type type; };
  
  template <typename T>
  struct is_any_mutable_polygon_type {
    typedef typename gtl_or<typename is_any_mutable_polygon_with_holes_type<T>::type,
                            typename is_any_mutable_polygon_without_holes_type<T>::type>::type type;
  };

  template <typename T>
  struct polygon_from_polygon_with_holes_type {};
  template <>
  struct polygon_from_polygon_with_holes_type<polygon_with_holes_concept> { typedef polygon_concept type; };
  template <>
  struct polygon_from_polygon_with_holes_type<polygon_45_with_holes_concept> { typedef polygon_45_concept type; };
  template <>
  struct polygon_from_polygon_with_holes_type<polygon_90_with_holes_concept> { typedef polygon_90_concept type; };

  template <>
  struct geometry_domain<polygon_45_concept> { typedef forty_five_domain type; };
  template <>
  struct geometry_domain<polygon_45_with_holes_concept> { typedef forty_five_domain type; };
  template <>
  struct geometry_domain<polygon_90_concept> { typedef manhattan_domain type; };
  template <>
  struct geometry_domain<polygon_90_with_holes_concept> { typedef manhattan_domain type; };

  template <typename domain_type, typename coordinate_type>
  struct distance_type_by_domain { typedef typename coordinate_traits<coordinate_type>::coordinate_distance type; };
  template <typename coordinate_type>
  struct distance_type_by_domain<manhattan_domain, coordinate_type> { 
    typedef typename coordinate_traits<coordinate_type>::coordinate_difference type; };

  // \brief Sets the boundary of the polygon to the points in the iterator range
  // \tparam T A type that models polygon_concept
  // \tparam iT Iterator type over objects that model point_concept
  // \param t The polygon to set
  // \param begin_points The start of the range of points
  // \param end_points The end of the range of points

  /// \relatesalso polygon_concept
  template <typename T, typename iT>
  typename enable_if <typename is_any_mutable_polygon_type<T>::type, T>::type &
  set_points(T& t, iT begin_points, iT end_points) {
    polygon_mutable_traits<T>::set_points(t, begin_points, end_points);
    return t;
  }

  // \brief Sets the boundary of the polygon to the non-redundant coordinates in the iterator range
  // \tparam T A type that models polygon_90_concept
  // \tparam iT Iterator type over objects that model coordinate_concept
  // \param t The polygon to set
  // \param begin_compact_coordinates The start of the range of coordinates
  // \param end_compact_coordinates The end of the range of coordinates

/// \relatesalso polygon_90_concept
  template <typename T, typename iT>
  typename enable_if <typename gtl_or< 
    typename is_mutable_polygon_90_type<T>::type, 
    typename is_mutable_polygon_90_with_holes_type<T>::type>::type, T>::type & 
  set_compact(T& t, iT begin_compact_coordinates, iT end_compact_coordinates) {
    polygon_90_mutable_traits<T>::set_compact(t, begin_compact_coordinates, end_compact_coordinates);
    return t;
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T, typename iT>
  typename enable_if< typename gtl_and <
    typename is_any_mutable_polygon_with_holes_type<T>::type,
    typename gtl_different_type<typename geometry_domain<typename geometry_concept<T>::type>::type, 
                                manhattan_domain>::type>::type,
                       T>::type &
  set_compact(T& t, iT begin_compact_coordinates, iT end_compact_coordinates) {
    iterator_compact_to_points<iT, point_data<typename polygon_traits<T>::coordinate_type> >
      itrb(begin_compact_coordinates, end_compact_coordinates),
      itre(end_compact_coordinates, end_compact_coordinates);
    return set_points(t, itrb, itre);
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T, typename iT>
  typename enable_if <typename is_any_mutable_polygon_with_holes_type<T>::type, T>::type &
  set_holes(T& t, iT begin_holes, iT end_holes) {
    polygon_with_holes_mutable_traits<T>::set_holes(t, begin_holes, end_holes);
    return t;
  }

/// \relatesalso polygon_90_concept
  template <typename T>
  typename polygon_90_traits<T>::compact_iterator_type
  begin_compact(const T& polygon,
    typename enable_if<
      typename gtl_and <typename is_polygon_with_holes_type<T>::type, 
                        typename gtl_same_type<typename geometry_domain<typename geometry_concept<T>::type>::type,
                manhattan_domain>::type>::type>::type * = 0
  ) {
    return polygon_90_traits<T>::begin_compact(polygon);
  }
  
/// \relatesalso polygon_90_concept
  template <typename T>
  typename polygon_90_traits<T>::compact_iterator_type
  end_compact(const T& polygon,
    typename enable_if< 
    typename gtl_and <typename is_polygon_with_holes_type<T>::type, 
                      typename gtl_same_type<typename geometry_domain<typename geometry_concept<T>::type>::type,
              manhattan_domain>::type>::type>::type * = 0
  ) {
    return polygon_90_traits<T>::end_compact(polygon);
  }
  
  /// \relatesalso polygon_concept
  template <typename T>
  typename enable_if < typename gtl_if<
    typename is_polygon_with_holes_type<T>::type>::type, 
                        typename polygon_traits<T>::iterator_type>::type
  begin_points(const T& polygon) {
    return polygon_traits<T>::begin_points(polygon);
  }

  /// \relatesalso polygon_concept
  template <typename T>
  typename enable_if < typename gtl_if<
    typename is_polygon_with_holes_type<T>::type>::type, 
                        typename polygon_traits<T>::iterator_type>::type
  end_points(const T& polygon) {
    return polygon_traits<T>::end_points(polygon);
  }

  /// \relatesalso polygon_concept
  template <typename T>
  typename enable_if <typename is_polygon_with_holes_type<T>::type, 
                       std::size_t>::type
  size(const T& polygon) {
    return polygon_traits<T>::size(polygon);
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T>
  typename enable_if < typename gtl_if<
    typename is_polygon_with_holes_type<T>::type>::type, 
                        typename polygon_with_holes_traits<T>::iterator_holes_type>::type
  begin_holes(const T& polygon) {
    return polygon_with_holes_traits<T>::begin_holes(polygon);
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T>
  typename enable_if < typename gtl_if<
    typename is_polygon_with_holes_type<T>::type>::type, 
                        typename polygon_with_holes_traits<T>::iterator_holes_type>::type
  end_holes(const T& polygon) {
    return polygon_with_holes_traits<T>::end_holes(polygon);
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T>
  typename enable_if <typename is_polygon_with_holes_type<T>::type, 
                       std::size_t>::type
  size_holes(const T& polygon) {
    return polygon_with_holes_traits<T>::size_holes(polygon);
  }

  // \relatesalso polygon_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_polygon_type<T1>::type,
                      typename is_polygon_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_mutable_traits<T1>::set_points(lvalue, polygon_traits<T2>::begin_points(rvalue),
                                           polygon_traits<T2>::end_points(rvalue));
    return lvalue;
  }

// \relatesalso polygon_with_holes_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_polygon_with_holes_type<T1>::type,
                      typename is_polygon_with_holes_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_mutable_traits<T1>::set_points(lvalue, polygon_traits<T2>::begin_points(rvalue),
                                           polygon_traits<T2>::end_points(rvalue));
    polygon_with_holes_mutable_traits<T1>::set_holes(lvalue, polygon_with_holes_traits<T2>::begin_holes(rvalue),
                                                     polygon_with_holes_traits<T2>::end_holes(rvalue));
    return lvalue;
  }

  // \relatesalso polygon_45_concept
  template <typename T1, typename T2>
  typename enable_if< typename gtl_and< typename is_mutable_polygon_45_type<T1>::type, typename is_polygon_45_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_mutable_traits<T1>::set_points(lvalue, polygon_traits<T2>::begin_points(rvalue),
                                           polygon_traits<T2>::end_points(rvalue));
    return lvalue;
  }

// \relatesalso polygon_45_with_holes_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_polygon_45_with_holes_type<T1>::type,
                      typename is_polygon_45_with_holes_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_mutable_traits<T1>::set_points(lvalue, polygon_traits<T2>::begin_points(rvalue),
                                           polygon_traits<T2>::end_points(rvalue));
    polygon_with_holes_mutable_traits<T1>::set_holes(lvalue, polygon_with_holes_traits<T2>::begin_holes(rvalue),
                                                     polygon_with_holes_traits<T2>::end_holes(rvalue));
    return lvalue;
  }
  
  // \relatesalso polygon_90_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_polygon_90_type<T1>::type,
                      typename is_polygon_90_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_90_mutable_traits<T1>::set_compact(lvalue, polygon_90_traits<T2>::begin_compact(rvalue),
                                               polygon_90_traits<T2>::end_compact(rvalue));
    return lvalue;
  }
  
// \relatesalso polygon_90_with_holes_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_polygon_90_with_holes_type<T1>::type,
                      typename is_polygon_90_with_holes_type<T2>::type>::type, T1>::type &
  assign(T1& lvalue, const T2& rvalue) {
    polygon_90_mutable_traits<T1>::set_compact(lvalue, polygon_90_traits<T2>::begin_compact(rvalue),
                                               polygon_90_traits<T2>::end_compact(rvalue));
    polygon_with_holes_mutable_traits<T1>::set_holes(lvalue, polygon_with_holes_traits<T2>::begin_holes(rvalue),
                                                     polygon_with_holes_traits<T2>::end_holes(rvalue));
    return lvalue;
  }

  // \relatesalso polygon_90_concept
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_type<T1>::type,
                      typename is_rectangle_concept<typename geometry_concept<T2>::type>::type>::type, T1>::type &
  assign(T1& polygon, const T2& rect) {
    typedef point_data<typename polygon_traits<T1>::coordinate_type> PT;
    PT points[4] = {PT(xl(rect), yl(rect)), PT(xh(rect), yl(rect)), PT(xh(rect), yh(rect)), PT(xl(rect), yh(rect))};
    set_points(polygon, points, points+4);
    return polygon;
  }

/// \relatesalso polygon_90_concept
  template <typename polygon_type, typename point_type>
  typename enable_if< typename gtl_and< typename is_mutable_polygon_90_type<polygon_type>::type, 
                                         typename is_point_concept<typename geometry_concept<point_type>::type>::type>::type,
                       polygon_type>::type &
  convolve(polygon_type& polygon, const point_type& point) {
    std::vector<typename polygon_90_traits<polygon_type>::coordinate_type> coords;
    coords.reserve(size(polygon));
    bool pingpong = true;
    for(typename polygon_90_traits<polygon_type>::compact_iterator_type iter = begin_compact(polygon); 
        iter != end_compact(polygon); ++iter) {
      coords.push_back((*iter) + (pingpong ? x(point) : y(point)));
      pingpong = !pingpong;
    }
    polygon_90_mutable_traits<polygon_type>::set_compact(polygon, coords.begin(), coords.end());
    return polygon;
  }

/// \relatesalso polygon_concept
  template <typename polygon_type, typename point_type>
  typename enable_if< typename gtl_and< typename gtl_or< 
    typename is_mutable_polygon_45_type<polygon_type>::type, 
    typename is_mutable_polygon_type<polygon_type>::type>::type, 
                                         typename is_point_concept<typename geometry_concept<point_type>::type>::type>::type,
                       polygon_type>::type &
  convolve(polygon_type& polygon, const point_type& point) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      convolve(points.back(), point);
    }
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }
  
/// \relatesalso polygon_with_holes_concept
  template <typename polygon_type, typename point_type>
  typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_with_holes_type<polygon_type>::type, 
                      typename is_point_concept<typename geometry_concept<point_type>::type>::type>::type,
    polygon_type>::type &
  convolve(polygon_type& polygon, const point_type& point) {
    typedef typename polygon_with_holes_traits<polygon_type>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    convolve(h, point);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<polygon_type>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      convolve(holes.back(), point);
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

/// \relatesalso polygon_concept
  template <typename T>
  typename enable_if< typename is_any_mutable_polygon_type<T>::type, T>::type &
  move(T& polygon, orientation_2d orient, typename polygon_traits<T>::coordinate_type displacement) {
    typedef typename polygon_traits<T>::coordinate_type Unit;
    if(orient == HORIZONTAL) return convolve(polygon, point_data<Unit>(displacement, Unit(0)));
    return convolve(polygon, point_data<Unit>(Unit(0), displacement));
  }                              

/// \relatesalso polygon_concept
/// \brief Applies a transformation to the polygon.
/// \tparam polygon_type A type that models polygon_concept
/// \tparam transform_type A type that may be either axis_transformation or transformation or that overloads point_concept::transform
/// \param polygon The polygon to transform
/// \param tr The transformation to apply
  template <typename polygon_type, typename transform_type>
  typename enable_if< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, polygon_type>::type &
  transform(polygon_type& polygon, const transform_type& tr) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      transform(points.back(), tr);
    }
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

/// \relatesalso polygon_with_holes_concept
  template <typename T, typename transform_type>
  typename enable_if< typename is_any_mutable_polygon_with_holes_type<T>::type, T>::type &
  transform(T& polygon, const transform_type& tr) {
    typedef typename polygon_with_holes_traits<T>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    transform(h, tr);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      transform(holes.back(), tr);
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

  template <typename polygon_type>
  typename enable_if< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, polygon_type>::type &
  scale_up(polygon_type& polygon, typename coordinate_traits<typename polygon_traits<polygon_type>::coordinate_type>::unsigned_area_type factor) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      scale_up(points.back(), factor);
    }
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  template <typename T>
  typename enable_if< typename is_any_mutable_polygon_with_holes_type<T>::type, T>::type &
  scale_up(T& polygon, typename coordinate_traits<typename polygon_traits<T>::coordinate_type>::unsigned_area_type factor) {
    typedef typename polygon_with_holes_traits<T>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    scale_up(h, factor);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      scale_up(holes.back(), factor);
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

  //scale non-45 down
  template <typename polygon_type>
  typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, 
                      typename gtl_not<typename gtl_same_type
                                       < forty_five_domain, 
                                         typename geometry_domain<typename geometry_concept<polygon_type>::type>::type>::type>::type>::type,
    polygon_type>::type &
  scale_down(polygon_type& polygon, typename coordinate_traits<typename polygon_traits<polygon_type>::coordinate_type>::unsigned_area_type factor) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      scale_down(points.back(), factor);
    }
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  template <typename Unit>
  Unit local_abs(Unit value) { return value < 0 ? (Unit)-value : value; }

  template <typename Unit>
  void snap_point_vector_to_45(std::vector<point_data<Unit> >& pts) {
    typedef point_data<Unit> Point;
    if(pts.size() < 3) { pts.clear(); return; }
    Point firstPt = pts.front();
    Point prevPt = firstPt;
    std::unique(pts.begin(), pts.end());
    if(pts.back() == pts[0]) pts.pop_back();
    //iterate over point triplets
    int numPts = pts.size();
    bool wrap_around = false;
    for(int i = 0; i < numPts; ++i) {
      Point& pt1 = pts[i];
      Point& pt2 = pts[(i + 1) % numPts];
      Point& pt3 = pts[(i + 2) % numPts];
      //check if non-45 edge
      Unit deltax = x(pt2) - x(pt1);
      Unit deltay = y(pt2) - y(pt1);
      if(deltax && deltay &&
         local_abs(deltax) != local_abs(deltay)) {
        //adjust the middle point
        Unit ndx = x(pt3) - x(pt2);
        Unit ndy = y(pt3) - y(pt2);
        if(ndx && ndy) {
          Unit diff = local_abs(local_abs(deltax) - local_abs(deltay));
          Unit halfdiff = diff/2;
          if((deltax > 0 && deltay > 0) ||
             (deltax < 0 && deltay < 0)) {
            //previous edge is rising slope
            if(local_abs(deltax + halfdiff + (diff % 2)) ==
               local_abs(deltay - halfdiff)) {
              x(pt2, x(pt2) + halfdiff + (diff % 2));
              y(pt2, y(pt2) - halfdiff);
            } else if(local_abs(deltax - halfdiff - (diff % 2)) ==
                      local_abs(deltay + halfdiff)) {
              x(pt2, x(pt2) - halfdiff - (diff % 2));
              y(pt2, y(pt2) + halfdiff);
            } else{
              //std::cout << "fail1\n";
            }
          } else {
            //previous edge is falling slope
            if(local_abs(deltax + halfdiff + (diff % 2)) ==
               local_abs(deltay + halfdiff)) {
              x(pt2, x(pt2) + halfdiff + (diff % 2));
              y(pt2, y(pt2) + halfdiff);
            } else if(local_abs(deltax - halfdiff - (diff % 2)) ==
                      local_abs(deltay - halfdiff)) {
              x(pt2, x(pt2) - halfdiff - (diff % 2));
              y(pt2, y(pt2) - halfdiff);
            } else {
              //std::cout << "fail2\n";
            }
          }
          if(i == numPts - 1 && (diff % 2)) {
            //we have a wrap around effect
            if(!wrap_around) {
              wrap_around = true;
              i = -1;
            }
          }
        } else if(ndx) {
          //next edge is horizontal
          //find the x value for pt1 that would make the abs(deltax) == abs(deltay)
          Unit newDeltaX = local_abs(deltay);
          if(deltax < 0) newDeltaX *= -1;
          x(pt2, x(pt1) + newDeltaX);
        } else { //ndy
          //next edge is vertical
          //find the y value for pt1 that would make the abs(deltax) == abs(deltay)
          Unit newDeltaY = local_abs(deltax);
          if(deltay < 0) newDeltaY *= -1;
          y(pt2, y(pt1) + newDeltaY);
        }
      }
    }
  }

  template <typename polygon_type>
  typename enable_if< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, polygon_type>::type &
  snap_to_45(polygon_type& polygon) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
    }
    snap_point_vector_to_45(points);
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  template <typename polygon_type>
  typename enable_if< typename is_any_mutable_polygon_with_holes_type<polygon_type>::type, polygon_type>::type &
  snap_to_45(polygon_type& polygon) {
    typedef typename polygon_with_holes_traits<polygon_type>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    snap_to_45(h);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<polygon_type>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      snap_to_45(holes.back());
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

  //scale specifically 45 down
  template <typename polygon_type>
  typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, 
                      typename gtl_same_type
                      < forty_five_domain, 
                        typename geometry_domain<typename geometry_concept<polygon_type>::type>::type>::type>::type,
    polygon_type>::type &
  scale_down(polygon_type& polygon, typename coordinate_traits<typename polygon_traits<polygon_type>::coordinate_type>::unsigned_area_type factor) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      scale_down(points.back(), factor);
    }
    snap_point_vector_to_45(points);
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  template <typename T>
  typename enable_if< typename is_any_mutable_polygon_with_holes_type<T>::type, T>::type &
  scale_down(T& polygon, typename coordinate_traits<typename polygon_traits<T>::coordinate_type>::unsigned_area_type factor) {
    typedef typename polygon_with_holes_traits<T>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    scale_down(h, factor);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      scale_down(holes.back(), factor);
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

  //scale non-45 
  template <typename polygon_type>
  typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, 
                      typename gtl_not<typename gtl_same_type
                                       < forty_five_domain, 
                                         typename geometry_domain<typename geometry_concept<polygon_type>::type>::type>::type>::type>::type,
    polygon_type>::type &
  scale(polygon_type& polygon, double factor) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      scale(points.back(), anisotropic_scale_factor<double>(factor, factor));
    }
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  //scale specifically 45 
  template <typename polygon_type>
  polygon_type&
  scale(polygon_type& polygon, double factor,
    typename enable_if<
    typename gtl_and< typename is_any_mutable_polygon_without_holes_type<polygon_type>::type, 
                      typename gtl_same_type
                      < forty_five_domain, 
        typename geometry_domain<typename geometry_concept<polygon_type>::type>::type>::type>::type>::type * = 0
  ) {
    std::vector<typename std::iterator_traits<typename polygon_traits<polygon_type>::iterator_type>::value_type> points;
    points.reserve(size(polygon));
    for(typename polygon_traits<polygon_type>::iterator_type iter = begin_points(polygon); 
        iter != end_points(polygon); ++iter) {
      points.push_back(*iter);
      scale(points.back(), anisotropic_scale_factor<double>(factor, factor));
    }
    snap_point_vector_to_45(points);
    polygon_mutable_traits<polygon_type>::set_points(polygon, points.begin(), points.end());
    return polygon;
  }

  template <typename T>
  T&
  scale(T& polygon, double factor,
  typename enable_if< typename is_any_mutable_polygon_with_holes_type<T>::type>::type * = 0
  ) {
    typedef typename polygon_with_holes_traits<T>::hole_type hole_type;
    hole_type h;
    set_points(h, begin_points(polygon), end_points(polygon));
    scale(h, factor);
    std::vector<hole_type> holes;
    holes.reserve(size_holes(polygon));
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr = begin_holes(polygon);
        itr != end_holes(polygon); ++itr) {
      holes.push_back(*itr);
      scale(holes.back(), factor);
    }
    assign(polygon, h);
    set_holes(polygon, holes.begin(), holes.end());
    return polygon;
  }

  template <typename iterator_type, typename area_type>
  static area_type
  point_sequence_area(iterator_type begin_range, iterator_type end_range) {
    typedef typename std::iterator_traits<iterator_type>::value_type point_type;
    typedef typename point_traits<point_type>::coordinate_type Unit;
    if(begin_range == end_range) return area_type(0);
    point_type first = *begin_range;
    point_type previous = first;
    ++begin_range;
    // Initialize trapezoid base line
    area_type y_base = (area_type)y(first);
    // Initialize area accumulator

    area_type area(0);
    while (begin_range != end_range) {
      area_type x1 = (area_type)x(previous);
      area_type x2 = (area_type)x(*begin_range);
#ifdef BOOST_POLYGON_ICC
#pragma warning (disable:1572)
#endif
      if(x1 != x2) {
#ifdef BOOST_POLYGON_ICC
#pragma warning (default:1572)
#endif
        // do trapezoid area accumulation
        area += (x2 - x1) * (((area_type)y(*begin_range) - y_base) +
                             ((area_type)y(previous) - y_base)) / 2;
      }
      previous = *begin_range;
      // go to next point
      ++begin_range;
    }
    //wrap around to evaluate the edge between first and last if not closed
    if(!equivalence(first, previous)) {
      area_type x1 = (area_type)x(previous);
      area_type x2 = (area_type)x(first);
      area += (x2 - x1) * (((area_type)y(first) - y_base) +
                           ((area_type)y(previous) - y_base)) / 2;
    }
    return area;
  }

  template <typename T>
  typename enable_if<  
    typename is_polygon_with_holes_type<T>::type,
                        typename area_type_by_domain< typename geometry_domain<typename geometry_concept<T>::type>::type,
                                                      typename polygon_traits<T>::coordinate_type>::type>::type
  area(const T& polygon) {
    typedef typename area_type_by_domain< typename geometry_domain<typename geometry_concept<T>::type>::type,
      typename polygon_traits<T>::coordinate_type>::type area_type;
    area_type retval = point_sequence_area<typename polygon_traits<T>::iterator_type, area_type>
      (begin_points(polygon), end_points(polygon));
    if(retval < 0) retval *= -1;
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr =
          polygon_with_holes_traits<T>::begin_holes(polygon);
        itr != polygon_with_holes_traits<T>::end_holes(polygon); ++itr) {
      area_type tmp_area = point_sequence_area
        <typename polygon_traits<typename polygon_with_holes_traits<T>::hole_type>::iterator_type, area_type>
        (begin_points(*itr), end_points(*itr));
      if(tmp_area < 0) tmp_area *= -1;
      retval -= tmp_area;
    }
    return retval;
  }

  template <typename iT>
  bool point_sequence_is_45(iT itr, iT itr_end) {
    typedef typename iT::value_type Point;
    typedef typename point_traits<Point>::coordinate_type Unit;
    if(itr == itr_end) return true;
    Point firstPt = *itr;
    Point prevPt = firstPt;
    ++itr;
    while(itr != itr_end) {
      Point pt = *itr;
      Unit deltax = x(pt) - x(prevPt);
      Unit deltay = y(pt) - y(prevPt);
      if(deltax && deltay &&
         local_abs(deltax) != local_abs(deltay))
        return false;
      prevPt = pt;
      ++itr;
    }
    Unit deltax = x(firstPt) - x(prevPt);
    Unit deltay = y(firstPt) - y(prevPt);
    if(deltax && deltay &&
       local_abs(deltax) != local_abs(deltay))
      return false;
    return true;
  }

  template <typename polygon_type>
  typename enable_if< typename is_polygon_with_holes_type<polygon_type>::type, bool>::type
  is_45(const polygon_type& polygon) {
    typename polygon_traits<polygon_type>::iterator_type itr = begin_points(polygon), itr_end = end_points(polygon);
    if(!point_sequence_is_45(itr, itr_end)) return false;
    typename polygon_with_holes_traits<polygon_type>::iterator_holes_type itrh = begin_holes(polygon), itrh_end = end_holes(polygon);
    typedef typename polygon_with_holes_traits<polygon_type>::hole_type hole_type;
    for(; itrh != itrh_end; ++ itrh) {
      typename polygon_traits<hole_type>::iterator_type itr1 = begin_points(polygon), itr1_end = end_points(polygon);
      if(!point_sequence_is_45(itr1, itr1_end)) return false;
    }
    return true;
  }

  template <typename distance_type, typename iterator_type>
  distance_type point_sequence_distance(iterator_type itr, iterator_type itr_end) {
    typedef distance_type Unit;
    typedef iterator_type iterator;
    typedef typename std::iterator_traits<iterator>::value_type point_type;
    Unit return_value = Unit(0);
    point_type previous_point, first_point;
    if(itr == itr_end) return return_value;
    previous_point = first_point = *itr;
    ++itr;
    for( ; itr != itr_end; ++itr) {
      point_type current_point = *itr;
      return_value += (Unit)euclidean_distance(current_point, previous_point);
      previous_point = current_point;
    }
    return_value += (Unit)euclidean_distance(previous_point, first_point);
    return return_value;
  }

  template <typename T>
  typename distance_type_by_domain
  <typename geometry_domain<typename geometry_concept<T>::type>::type, typename polygon_traits<T>::coordinate_type>::type
  perimeter(const T& polygon,
  typename enable_if< 
      typename is_polygon_with_holes_type<T>::type>::type * = 0
  ) {
    typedef typename distance_type_by_domain
      <typename geometry_domain<typename geometry_concept<T>::type>::type, typename polygon_traits<T>::coordinate_type>::type Unit;
    typedef typename polygon_traits<T>::iterator_type iterator;
    iterator itr = begin_points(polygon);
    iterator itr_end = end_points(polygon);
    Unit return_value = point_sequence_distance<Unit, iterator>(itr, itr_end);
    for(typename polygon_with_holes_traits<T>::iterator_holes_type itr_holes = begin_holes(polygon);
        itr_holes != end_holes(polygon); ++itr_holes) {
      typedef typename polygon_traits<typename polygon_with_holes_traits<T>::hole_type>::iterator_type hitertype;
      return_value += point_sequence_distance<Unit, hitertype>(begin_points(*itr_holes), end_points(*itr_holes));
    }
    return return_value;
  }

  template <typename T>
  typename enable_if <typename is_polygon_with_holes_type<T>::type, 
                       direction_1d>::type
  winding(const T& polygon) {
    winding_direction wd = polygon_traits<T>::winding(polygon);
    if(wd != unknown_winding) {
      return wd == clockwise_winding ? CLOCKWISE: COUNTERCLOCKWISE;
    }
    typedef typename area_type_by_domain< typename geometry_domain<typename geometry_concept<T>::type>::type,
      typename polygon_traits<T>::coordinate_type>::type area_type;
    return point_sequence_area<typename polygon_traits<T>::iterator_type, area_type>(begin_points(polygon), end_points(polygon)) < 0 ?
      COUNTERCLOCKWISE : CLOCKWISE;
  }

  template <typename T, typename input_point_type>
  typename enable_if< 
    typename gtl_and< typename is_polygon_90_type<T>::type, 
                      typename gtl_same_type<typename geometry_concept<input_point_type>::type, point_concept>::type>::type, 
    bool>::type
  contains(const T& polygon, const input_point_type& point, bool consider_touch = true) {
    typedef T polygon_type;
    typedef typename polygon_traits<polygon_type>::coordinate_type coordinate_type;
    typedef typename polygon_traits<polygon_type>::iterator_type iterator;
    typedef typename std::iterator_traits<iterator>::value_type point_type;
    iterator iter, iter_end;
    iter_end = end_points(polygon);
    iter = begin_points(polygon);
    point_type prev_pt = *iter;
    std::size_t num = size(polygon);
    std::size_t counts[2] = {0, 0};
    for(std::size_t i = 0; i < num; ++i) {
      if(i == num-1) iter = begin_points(polygon);
      else ++iter;
      point_type current_pt = *iter;
      if(x(current_pt) == 
         x(prev_pt)) {
        unsigned int index = x(current_pt) > 
          x(point);
        std::size_t increment = 0;
        interval_data<coordinate_type> ivl(y(current_pt), 
                                           y(prev_pt));
        if(contains(ivl, y(point), true)) {
          if(x(current_pt) == 
             x(point)) return consider_touch;
          ++increment;
          if(y(current_pt) != 
             y(point) &&
             y(prev_pt) != 
             y(point)) {
            ++increment;
          } 
          counts[index] += increment;
        }
      }
      prev_pt = current_pt;
    }
    //odd count implies boundary condition
    if(counts[0] % 2 || counts[1] % 2) return consider_touch;
    //an odd number of edges to the left implies interior pt
    return counts[0] % 4 != 0; 
  }

  //TODO: refactor to expose as user APIs
  template <typename Unit>
  struct edge_utils {
    typedef point_data<Unit> Point;
    typedef std::pair<Point, Point> half_edge;

    class less_point : public std::binary_function<Point, Point, bool> {
    public:
      inline less_point() {}
      inline bool operator () (const Point& pt1, const Point& pt2) const {
        if(pt1.get(HORIZONTAL) < pt2.get(HORIZONTAL)) return true;
        if(pt1.get(HORIZONTAL) == pt2.get(HORIZONTAL)) {
          if(pt1.get(VERTICAL) < pt2.get(VERTICAL)) return true;
        }
        return false;
      }
    };

    static inline bool between(Point pt, Point pt1, Point pt2) {
      less_point lp;
      if(lp(pt1, pt2))
        return lp(pt, pt2) && lp(pt1, pt);
      return lp(pt, pt1) && lp(pt2, pt);
    }
    
    template <typename area_type>
    static inline bool equal_slope(area_type dx1, area_type dy1, area_type dx2, area_type dy2) {
      typedef typename coordinate_traits<Unit>::unsigned_area_type unsigned_product_type;
      unsigned_product_type cross_1 = (unsigned_product_type)(dx2 < 0 ? -dx2 :dx2) * (unsigned_product_type)(dy1 < 0 ? -dy1 : dy1);
      unsigned_product_type cross_2 = (unsigned_product_type)(dx1 < 0 ? -dx1 :dx1) * (unsigned_product_type)(dy2 < 0 ? -dy2 : dy2);
      int dx1_sign = dx1 < 0 ? -1 : 1;
      int dx2_sign = dx2 < 0 ? -1 : 1;
      int dy1_sign = dy1 < 0 ? -1 : 1;
      int dy2_sign = dy2 < 0 ? -1 : 1;
      int cross_1_sign = dx2_sign * dy1_sign;
      int cross_2_sign = dx1_sign * dy2_sign;
      return cross_1 == cross_2 && (cross_1_sign == cross_2_sign || cross_1 == 0);
    }

    static inline bool equal_slope(const Unit& x, const Unit& y,
                                   const Point& pt1, const Point& pt2) {
      const Point* pts[2] = {&pt1, &pt2};
      typedef typename coordinate_traits<Unit>::manhattan_area_type at;
      at dy2 = (at)pts[1]->get(VERTICAL) - (at)y;
      at dy1 = (at)pts[0]->get(VERTICAL) - (at)y;
      at dx2 = (at)pts[1]->get(HORIZONTAL) - (at)x;
      at dx1 = (at)pts[0]->get(HORIZONTAL) - (at)x;
      return equal_slope(dx1, dy1, dx2, dy2);
    }

    template <typename area_type>
    static inline bool less_slope(area_type dx1, area_type dy1, area_type dx2, area_type dy2) {
      //reflext x and y slopes to right hand side half plane
      if(dx1 < 0) {
        dy1 *= -1;
        dx1 *= -1;
      } else if(dx1 == 0) {
        //if the first slope is vertical the first cannot be less
        return false;
      }
      if(dx2 < 0) {
        dy2 *= -1;
        dx2 *= -1;
      } else if(dx2 == 0) {
        //if the second slope is vertical the first is always less unless it is also vertical, in which case they are equal 
        return dx1 != 0;
      }
      typedef typename coordinate_traits<Unit>::unsigned_area_type unsigned_product_type;
      unsigned_product_type cross_1 = (unsigned_product_type)(dx2 < 0 ? -dx2 :dx2) * (unsigned_product_type)(dy1 < 0 ? -dy1 : dy1);
      unsigned_product_type cross_2 = (unsigned_product_type)(dx1 < 0 ? -dx1 :dx1) * (unsigned_product_type)(dy2 < 0 ? -dy2 : dy2);
      int dx1_sign = dx1 < 0 ? -1 : 1;
      int dx2_sign = dx2 < 0 ? -1 : 1;
      int dy1_sign = dy1 < 0 ? -1 : 1;
      int dy2_sign = dy2 < 0 ? -1 : 1;
      int cross_1_sign = dx2_sign * dy1_sign;
      int cross_2_sign = dx1_sign * dy2_sign;
      if(cross_1_sign < cross_2_sign) return true;
      if(cross_2_sign < cross_1_sign) return false;
      if(cross_1_sign == -1) return cross_2 < cross_1;
      return cross_1 < cross_2;
    }

    static inline bool less_slope(const Unit& x, const Unit& y,
                                  const Point& pt1, const Point& pt2) {
      const Point* pts[2] = {&pt1, &pt2};
      //compute y value on edge from pt_ to pts[1] at the x value of pts[0]
      typedef typename coordinate_traits<Unit>::manhattan_area_type at;
      at dy2 = (at)pts[1]->get(VERTICAL) - (at)y;
      at dy1 = (at)pts[0]->get(VERTICAL) - (at)y;
      at dx2 = (at)pts[1]->get(HORIZONTAL) - (at)x;
      at dx1 = (at)pts[0]->get(HORIZONTAL) - (at)x;
      return less_slope(dx1, dy1, dx2, dy2);
    }

    //return -1 below, 0 on and 1 above line
    //assumes point is on x interval of segment
    static inline int on_above_or_below(Point pt, const half_edge& he) {
      if(pt == he.first || pt == he.second) return 0;
      if(equal_slope(pt.get(HORIZONTAL), pt.get(VERTICAL), he.first, he.second)) return 0;
      bool less_result = less_slope(pt.get(HORIZONTAL), pt.get(VERTICAL), he.first, he.second);
      int retval = less_result ? -1 : 1;
      less_point lp;
      if(lp(he.second, he.first)) retval *= -1;
      if(!between(pt, he.first, he.second)) retval *= -1;
      return retval;
    }
  };

  template <typename T, typename input_point_type>
  typename enable_if< 
    typename gtl_and< typename is_any_mutable_polygon_with_holes_type<T>::type, 
                      typename gtl_same_type<typename geometry_concept<input_point_type>::type, point_concept>::type>::type,
    bool>::type
  contains(const T& polygon, const input_point_type& point, bool consider_touch = true) {
    typedef typename polygon_with_holes_traits<T>::iterator_holes_type holes_iterator;
    bool isInside = contains( view_as< typename polygon_from_polygon_with_holes_type<
                              typename geometry_concept<T>::type>::type>( polygon ), point, consider_touch );
    if(!isInside) return false; //no need to check holes
    holes_iterator itH = begin_holes( polygon );
    while( itH != end_holes( polygon ) ) {
      if(  contains( *itH, point, !consider_touch )  ) {
        isInside = false;
        break;
      }
      ++itH;
    }
    return isInside;
  }

  template <typename T, typename input_point_type>
  typename enable_if< 
    typename gtl_and_3< 
      typename is_polygon_type<T>::type, 
      typename gtl_different_type<typename geometry_domain<typename geometry_concept<T>::type>::type, manhattan_domain>::type, 
      typename gtl_same_type<typename geometry_concept<input_point_type>::type, point_concept>::type>::type,
    bool>::type
  contains(const T& polygon, const input_point_type& point, bool consider_touch = true) {
    typedef typename point_traits<input_point_type>::coordinate_type Unit;
    typedef point_data<Unit> Point;
    typedef std::pair<Point, Point> half_edge;
    typedef typename polygon_traits<T>::iterator_type iterator;
    iterator itr = begin_points(polygon);
    iterator itrEnd = end_points(polygon);
    half_edge he;
    if(itr == itrEnd) return false;
    assign(he.first, *itr);
    Point firstPt;
    assign(firstPt, *itr);
    ++itr;
    if(itr == itrEnd) return false;
    bool done = false;
    int above = 0;
    while(!done) {
      Point currentPt;
      if(itr == itrEnd) {
        done = true;
        currentPt = firstPt;
      } else {
        assign(currentPt, *itr);
        ++itr;
      }
      if(currentPt == he.first) {
        continue;
      } else {
        he.second = currentPt;
        if(equivalence(point, currentPt)) return consider_touch;
        Unit xmin = (std::min)(x(he.first), x(he.second));
        Unit xmax = (std::max)(x(he.first), x(he.second));
        if(x(point) >= xmin && x(point) < xmax) { //double counts if <= xmax
          Point tmppt;
          assign(tmppt, point);
          int oabedge = edge_utils<Unit>::on_above_or_below(tmppt, he);
          if(oabedge == 0) return consider_touch;
          if(oabedge == 1) ++above;
        } else if(x(point) == xmax) {
          Point tmppt;
          assign(tmppt, point);
          if( edge_utils<Unit>::on_above_or_below(tmppt, he) == 0 ) {
            return consider_touch;
          }
        }
      }
      he.first = he.second;
    } 
    return above % 2 != 0; //if the point is above an odd number of edges is must be inside polygon
  }

  /*
  template <typename T, typename input_point_type>
  typename enable_if< 
    typename gtl_and_3< 
      typename is_polygon_with_holes_type<T>::type, 
      typename gtl_different_type<typename geometry_domain<typename geometry_concept<T>::type>::type, manhattan_domain>::type, 
      typename gtl_same_type<typename geometry_concept<input_point_type>::type, point_concept>::type>::type,
    bool>::type
  contains(const T& polygon, const input_point_type& point, bool consider_touch = true) {
    typedef typename point_traits<input_point_type>::coordinate_type Unit;
    typedef point_data<Unit> Point;
    typedef std::pair<Point, Point> half_edge;
    typedef typename polygon_traits<T>::iterator_type iterator;
    iterator itr = begin_points(polygon);
    iterator itrEnd = end_points(polygon);
    half_edge he;
    if(itr == itrEnd) return false;
    assign(he.first, *itr);
    Point firstPt;
    assign(firstPt, *itr);
    ++itr;
    if(itr == itrEnd) return false;
    bool done = false;
    int above = 0;
    while(!done) {
      Point currentPt;
      if(itr == itrEnd) {
        done = true;
        currentPt = firstPt;
      } else {
        assign(currentPt, *itr);
        ++itr;
      }
      if(currentPt == he.first) {
        continue;
      } else {
        he.second = currentPt;
        if(equivalence(point, currentPt)) return consider_touch;
        Unit xmin = (std::min)(x(he.first), x(he.second));
        Unit xmax = (std::max)(x(he.first), x(he.second));
        if(x(point) >= xmin && x(point) < xmax) { //double counts if <= xmax
          Point tmppt;
          assign(tmppt, point);
          int oabedge = edge_utils<Unit>::on_above_or_below(tmppt, he);
          if(oabedge == 0) return consider_touch;
          if(oabedge == 1) ++above;
        }
      }
      he.first = he.second;
    } 
    return above % 2 != 0; //if the point is above an odd number of edges is must be inside polygon
  }
  */

  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_point_concept<typename geometry_concept<T1>::type>::type,
                      typename is_polygon_with_holes_type<T2>::type>::type,
    bool>::type 
  center(T1& center_point, const T2& polygon) {
    typedef typename polygon_traits<T2>::coordinate_type coordinate_type;
    rectangle_data<coordinate_type> bbox;
    extents(bbox, polygon);
    return center(center_point, bbox);
  }
   
  template <typename T1, typename T2>
  typename enable_if<
    typename gtl_and< typename is_mutable_rectangle_concept<typename geometry_concept<T1>::type>::type,
                      typename is_polygon_with_holes_type<T2>::type>::type,
    bool>::type 
  extents(T1& bounding_box, const T2& polygon) {
    typedef typename polygon_traits<T2>::iterator_type iterator;
    bool first_iteration = true;
    iterator itr_end = end_points(polygon);
    for(iterator itr = begin_points(polygon); itr != itr_end; ++itr) {
      if(first_iteration) {
        set_points(bounding_box, *itr, *itr);
        first_iteration = false;
      } else {
        encompass(bounding_box, *itr);
      }
    }
    if(first_iteration) return false;
    return true;
  }

  template <class T>
  template <class T2>
  polygon_90_data<T>& polygon_90_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <class T>
  template <class T2>
  polygon_45_data<T>& polygon_45_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <class T>
  template <class T2>
  polygon_data<T>& polygon_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <class T>
  template <class T2>
  polygon_90_with_holes_data<T>& polygon_90_with_holes_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <class T>
  template <class T2>
  polygon_45_with_holes_data<T>& polygon_45_with_holes_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <class T>
  template <class T2>
  polygon_with_holes_data<T>& polygon_with_holes_data<T>::operator=(const T2& rvalue) {
    assign(*this, rvalue);
    return *this;
  }

  template <typename T>
  struct geometry_concept<polygon_data<T> > {
    typedef polygon_concept type;
  };
  template <typename T>
  struct geometry_concept<polygon_45_data<T> > {
    typedef polygon_45_concept type;
  };
  template <typename T>
  struct geometry_concept<polygon_90_data<T> > {
    typedef polygon_90_concept type;
  };
  template <typename T>
  struct geometry_concept<polygon_with_holes_data<T> > {
    typedef polygon_with_holes_concept type;
  };
  template <typename T>
  struct geometry_concept<polygon_45_with_holes_data<T> > {
    typedef polygon_45_with_holes_concept type;
  };
  template <typename T>
  struct geometry_concept<polygon_90_with_holes_data<T> > {
    typedef polygon_90_with_holes_concept type;
  };

//   template <typename T> struct polygon_with_holes_traits<polygon_90_data<T> > {
//     typedef polygon_90_data<T> hole_type;
//     typedef const hole_type* iterator_holes_type;
//     static inline iterator_holes_type begin_holes(const hole_type& t) { return &t; }
//     static inline iterator_holes_type end_holes(const hole_type& t) { return &t; }
//     static inline std::size_t size_holes(const hole_type& t) { return 0; }
//   };
//   template <typename T> struct polygon_with_holes_traits<polygon_45_data<T> > {
//     typedef polygon_45_data<T> hole_type;
//     typedef const hole_type* iterator_holes_type;
//     static inline iterator_holes_type begin_holes(const hole_type& t) { return &t; }
//     static inline iterator_holes_type end_holes(const hole_type& t) { return &t; }
//     static inline std::size_t size_holes(const hole_type& t) { return 0; }
//   };
//   template <typename T> struct polygon_with_holes_traits<polygon_data<T> > {
//     typedef polygon_data<T> hole_type;
//     typedef const hole_type* iterator_holes_type;
//     static inline iterator_holes_type begin_holes(const hole_type& t) { return &t; }
//     static inline iterator_holes_type end_holes(const hole_type& t) { return &t; }
//     static inline std::size_t size_holes(const hole_type& t) { return 0; }
//   };
  template <typename T> struct get_void {};
  template <> struct get_void<gtl_yes> { typedef void type; };
  
  template <typename T> struct polygon_with_holes_traits<
    T, typename get_void<typename is_any_mutable_polygon_without_holes_type<T>::type>::type > {
    typedef T hole_type;
    typedef const hole_type* iterator_holes_type;
    static inline iterator_holes_type begin_holes(const hole_type& t) { return &t; }
    static inline iterator_holes_type end_holes(const hole_type& t) { return &t; }
    static inline std::size_t size_holes(const hole_type& t) { return 0; }
  };

  template <typename T>
  struct view_of<rectangle_concept, T> {
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef interval_data<coordinate_type> interval_type;
    rectangle_data<coordinate_type> rect;
    view_of(const T& obj) : rect() {
      point_data<coordinate_type> pts[2];
      typename polygon_traits<T>::iterator_type itr = 
        begin_points(obj), itre = end_points(obj);
      if(itr == itre) return;
      assign(pts[0], *itr);
      ++itr;
      if(itr == itre) return;
      ++itr;
      if(itr == itre) return;
      assign(pts[1], *itr);
      set_points(rect, pts[0], pts[1]);
    }
    inline interval_type get(orientation_2d orient) const {
      return rect.get(orient); }
  };

  template <typename T>
  struct geometry_concept<view_of<rectangle_concept, T> > {
    typedef rectangle_concept type;
  };
                                                         
  template <typename T>
  struct view_of<polygon_45_concept, T> {
    const T* t;
    view_of(const T& obj) : t(&obj) {}
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef typename polygon_traits<T>::iterator_type iterator_type;
    typedef typename polygon_traits<T>::point_type point_type;

    /// Get the begin iterator
    inline iterator_type begin() const {
      return polygon_traits<T>::begin_points(*t);
    }
  
    /// Get the end iterator
    inline iterator_type end() const {
      return polygon_traits<T>::end_points(*t);
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size() const {
      return polygon_traits<T>::size(*t);
    }
  
    /// Get the winding direction of the polygon
    inline winding_direction winding() const {
      return polygon_traits<T>::winding(*t);
    }
  };

  template <typename T>
  struct geometry_concept<view_of<polygon_45_concept, T> > {
    typedef polygon_45_concept type;
  };
  
  template <typename T>
  struct view_of<polygon_90_concept, T> {
    const T* t;
    view_of(const T& obj) : t(&obj) {}
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef typename polygon_traits<T>::iterator_type iterator_type;
    typedef typename polygon_traits<T>::point_type point_type;
    typedef iterator_points_to_compact<iterator_type, point_type> compact_iterator_type;

    /// Get the begin iterator
    inline compact_iterator_type begin_compact() const {
      return compact_iterator_type(polygon_traits<T>::begin_points(*t),
                                   polygon_traits<T>::end_points(*t));
    }
  
    /// Get the end iterator
    inline compact_iterator_type end_compact() const {
      return compact_iterator_type(polygon_traits<T>::end_points(*t),
                                   polygon_traits<T>::end_points(*t));
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size() const {
      return polygon_traits<T>::size(*t);
    }
  
    /// Get the winding direction of the polygon
    inline winding_direction winding() const {
      return polygon_traits<T>::winding(*t);
    }
  };

  template <typename T>
  struct geometry_concept<view_of<polygon_90_concept, T> > {
    typedef polygon_90_concept type;
  };

  template <typename T>
  struct view_of<polygon_45_with_holes_concept, T> {
    const T* t;
    view_of(const T& obj) : t(&obj) {}
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef typename polygon_traits<T>::iterator_type iterator_type;
    typedef typename polygon_traits<T>::point_type point_type;
    typedef view_of<polygon_45_concept, typename polygon_with_holes_traits<T>::hole_type> hole_type;
    struct iterator_holes_type {
      typedef std::forward_iterator_tag iterator_category;
      typedef hole_type value_type;
      typedef std::ptrdiff_t difference_type;
      typedef const hole_type* pointer; //immutable
      typedef const hole_type& reference; //immutable
      typedef typename polygon_with_holes_traits<T>::iterator_holes_type iht;
      iht internal_itr;
      iterator_holes_type() : internal_itr() {}
      iterator_holes_type(iht iht_in) : internal_itr(iht_in) {}
      inline iterator_holes_type& operator++() {
        ++internal_itr;
        return *this;
      }
      inline const iterator_holes_type operator++(int) {
        iterator_holes_type tmp(*this);
        ++(*this);
        return tmp;
      }
      inline bool operator==(const iterator_holes_type& that) const {
        return (internal_itr == that.internal_itr);
      }
      inline bool operator!=(const iterator_holes_type& that) const {
        return (internal_itr != that.internal_itr);
      }
      inline value_type operator*() const { 
        return view_as<polygon_45_concept>(*internal_itr);
      }
    };
      
    /// Get the begin iterator
    inline iterator_type begin() const {
      return polygon_traits<T>::begin_points(*t);
    }
  
    /// Get the end iterator
    inline iterator_type end() const {
      return polygon_traits<T>::end_points(*t);
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size() const {
      return polygon_traits<T>::size(*t);
    }
  
    /// Get the winding direction of the polygon
    inline winding_direction winding() const {
      return polygon_traits<T>::winding(*t);
    }

    /// Get the begin iterator
    inline iterator_holes_type begin_holes() const {
      return polygon_with_holes_traits<T>::begin_holes(*t);
    }
  
    /// Get the end iterator
    inline iterator_holes_type end_holes() const {
      return polygon_with_holes_traits<T>::end_holes(*t);
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size_holes() const {
      return polygon_with_holes_traits<T>::size_holes(*t);
    }
  
  };

  template <typename T>
  struct geometry_concept<view_of<polygon_45_with_holes_concept, T> > {
    typedef polygon_45_with_holes_concept type;
  };
  
  template <typename T>
  struct view_of<polygon_90_with_holes_concept, T> {
    const T* t;
    view_of(const T& obj) : t(&obj) {}
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef typename polygon_traits<T>::iterator_type iterator_type;
    typedef typename polygon_traits<T>::point_type point_type;
    typedef iterator_points_to_compact<iterator_type, point_type> compact_iterator_type;
    typedef view_of<polygon_90_concept, typename polygon_with_holes_traits<T>::hole_type> hole_type;
    struct iterator_holes_type {
      typedef std::forward_iterator_tag iterator_category;
      typedef hole_type value_type;
      typedef std::ptrdiff_t difference_type;
      typedef const hole_type* pointer; //immutable
      typedef const hole_type& reference; //immutable
      typedef typename polygon_with_holes_traits<T>::iterator_holes_type iht;
      iht internal_itr;
      iterator_holes_type() : internal_itr() {}
      iterator_holes_type(iht iht_in) : internal_itr(iht_in) {}
      inline iterator_holes_type& operator++() {
        ++internal_itr;
        return *this;
      }
      inline const iterator_holes_type operator++(int) {
        iterator_holes_type tmp(*this);
        ++(*this);
        return tmp;
      }
      inline bool operator==(const iterator_holes_type& that) const {
        return (internal_itr == that.internal_itr);
      }
      inline bool operator!=(const iterator_holes_type& that) const {
        return (internal_itr != that.internal_itr);
      }
      inline value_type operator*() const { 
        return view_as<polygon_90_concept>(*internal_itr);
      }
    };
      
    /// Get the begin iterator
    inline compact_iterator_type begin_compact() const {
      return compact_iterator_type(polygon_traits<T>::begin_points(*t),
                                   polygon_traits<T>::end_points(*t));
    }
  
    /// Get the end iterator
    inline compact_iterator_type end_compact() const {
      return compact_iterator_type(polygon_traits<T>::end_points(*t),
                                   polygon_traits<T>::end_points(*t));
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size() const {
      return polygon_traits<T>::size(*t);
    }
  
    /// Get the winding direction of the polygon
    inline winding_direction winding() const {
      return polygon_traits<T>::winding(*t);
    }

    /// Get the begin iterator
    inline iterator_holes_type begin_holes() const {
      return polygon_with_holes_traits<T>::begin_holes(*t);
    }
  
    /// Get the end iterator
    inline iterator_holes_type end_holes() const {
      return polygon_with_holes_traits<T>::end_holes(*t);
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size_holes() const {
      return polygon_with_holes_traits<T>::size_holes(*t);
    }
  
  };

  template <typename T>
  struct geometry_concept<view_of<polygon_90_with_holes_concept, T> > {
    typedef polygon_90_with_holes_concept type;
  };

  template <typename T>
  struct view_of<polygon_concept, T> {
    const T* t;
    view_of(const T& obj) : t(&obj) {}
    typedef typename polygon_traits<T>::coordinate_type coordinate_type;
    typedef typename polygon_traits<T>::iterator_type iterator_type;
    typedef typename polygon_traits<T>::point_type point_type;

    /// Get the begin iterator
    inline iterator_type begin() const {
      return polygon_traits<T>::begin_points(*t);
    }
  
    /// Get the end iterator
    inline iterator_type end() const {
      return polygon_traits<T>::end_points(*t);
    }
  
    /// Get the number of sides of the polygon
    inline std::size_t size() const {
      return polygon_traits<T>::size(*t);
    }
  
    /// Get the winding direction of the polygon
    inline winding_direction winding() const {
      return polygon_traits<T>::winding(*t);
    }
  };

  template <typename T>
  struct geometry_concept<view_of<polygon_concept, T> > {
    typedef polygon_concept type;
  };
}
}

#endif