[/ 
  Copyright 2006-2007 John Maddock.
  Distributed under the Boost Software License, Version 1.0.
  (See accompanying file LICENSE_1_0.txt or copy at
  http://www.boost.org/LICENSE_1_0.txt).
]

[section:locale Localization]

Boost.Regex provides extensive support for run-time localization, the 
localization model used can be split into two parts: front-end and back-end.

Front-end localization deals with everything which the user sees - 
error messages, and the regular expression syntax itself. For example a 
French application could change \[\[:word:\]\] to \[\[:mot:\]\] and \\w to \\m. 
Modifying the front end locale requires active support from the developer, 
by providing the library with a message catalogue to load, containing the 
localized strings. Front-end locale is affected by the LC_MESSAGES category only.

Back-end localization deals with everything that occurs after the expression 
has been parsed - in other words everything that the user does not see or 
interact with directly. It deals with case conversion, collation, and character 
class membership. The back-end locale does not require any intervention from 
the developer - the library will acquire all the information it requires for 
the current locale from the underlying operating system / run time library. 
This means that if the program user does not interact with regular 
expressions directly - for example if the expressions are embedded in your 
C++ code - then no explicit localization is required, as the library will 
take care of everything for you. For example embedding the expression 
\[\[:word:\]\]+ in your code will always match a whole word, if the 
program is run on a machine with, for example, a Greek locale, then it 
will still match a whole word, but in Greek characters rather than Latin ones. 
The back-end locale is affected by the LC_TYPE and LC_COLLATE categories.

There are three separate localization mechanisms supported by Boost.Regex:

[h4 Win32 localization model.]

This is the default model when the library is compiled under Win32, and is 
encapsulated by the traits class `w32_regex_traits`. When this model is in 
effect each [basic_regex] object gets it's own LCID, by default this is 
the users default setting as returned by GetUserDefaultLCID, but you can 
call imbue on the `basic_regex` object to set it's locale to some other 
LCID if you wish. All the settings used by Boost.Regex are acquired directly 
from the operating system bypassing the C run time library. Front-end 
localization requires a resource dll, containing a string table with the 
user-defined strings. The traits class exports the function:

   static std::string set_message_catalogue(const std::string& s);

which needs to be called with a string identifying the name of the resource 
dll, before your code compiles any regular expressions (but not necessarily 
before you construct any `basic_regex` instances):

   boost::w32_regex_traits<char>::set_message_catalogue("mydll.dll");

The library provides full Unicode support under NT, under Windows 9x 
the library degrades gracefully - characters 0 to 255 are supported, the 
remainder are treated as "unknown" graphic characters.

[h4 C localization model.]

This model has been deprecated in favor of the C++ locale for all non-Windows 
compilers that support it.  This locale is encapsulated by the traits class 
`c_regex_traits`, Win32 users can force this model to take effect by 
defining the pre-processor symbol BOOST_REGEX_USE_C_LOCALE. When this model is 
in effect there is a single global locale, as set by `setlocale`. All settings 
are acquired from your run time library, consequently Unicode support is 
dependent upon your run time library implementation.

Front end localization is not supported.

Note that calling setlocale invalidates all compiled regular expressions, 
calling `setlocale(LC_ALL, "C")` will make this library behave equivalent to 
most traditional regular expression libraries including version 1 of this library.

[h4 C++ localization model.]

This model is the default for non-Windows compilers.

When this model is in effect each instance of [basic_regex] has its own 
instance of `std::locale`, class [basic_regex] also has a member function 
`imbue` which allows the locale for the expression to be set on a 
per-instance basis. Front end localization requires a POSIX message catalogue, 
which will be loaded via the `std::messages` facet of the expression's locale, 
the traits class exports the symbol:

   static std::string set_message_catalogue(const std::string& s);

which needs to be called with a string identifying the name of the 
message catalogue, before your code compiles any regular expressions 
(but not necessarily before you construct any basic_regex instances):

   boost::cpp_regex_traits<char>::set_message_catalogue("mycatalogue");

Note that calling `basic_regex<>::imbue` will invalidate any expression 
currently compiled in that instance of [basic_regex].

Finally note that if you build the library with a non-default localization model, 
then the appropriate pre-processor symbol (BOOST_REGEX_USE_C_LOCALE or 
BOOST_REGEX_USE_CPP_LOCALE) must be defined both when you build the support 
library, and when you include `<boost/regex.hpp>` or `<boost/cregex.hpp>` 
in your code. The best way to ensure this is to add the #define to 
`<boost/regex/user.hpp>`.

[h4 Providing a message catalogue]

In order to localize the front end of the library, you need to provide the 
library with the appropriate message strings contained either in a resource 
dll's string table (Win32 model), or a POSIX message catalogue (C++ models). 
In the latter case the messages must appear in message set zero of the 
catalogue. The messages and their id's are as follows:
 
[table
  	[[Message][id][Meaning][Default value]] 	 
  	[[101][The character used to start a sub-expression.]["(" 	 ]]
  	[[102][The character used to end a sub-expression declaration.][")" 	 ]]
  	[[103][The character used to denote an end of line assertion.]["$" 	 ]]
  	[[104][The character used to denote the start of line assertion.]["^" 	 ]]
  	[[105][The character used to denote the "match any character expression".]["." 	 ]]
  	[[106][The match zero or more times repetition operator.]["*" 	 ]]
  	[[107][The match one or more repetition operator.]["+" 	 ]]
  	[[108][The match zero or one repetition operator.]["?" 	 ]]
  	[[109][The character set opening character.]["\[" 	 ]]
  	[[110][The character set closing character.]["\]" 	 ]]
  	[[111][The alternation operator.]["|" 	 ]]
  	[[112][The escape character.]["\\" 	 ]]
  	[[113][The hash character (not currently used).]["#" 	 ]]
  	[[114][The range operator.]["-" 	 ]]
  	[[115][The repetition operator opening character.]["{" 	 ]]
  	[[116][The repetition operator closing character.]["}" 	 ]]
  	[[117][The digit characters.]["0123456789" 	 ]]
  	[[118][The character which when preceded by an escape character represents the word boundary assertion.]["b" 	 ]]
  	[[119][The character which when preceded by an escape character represents the non-word boundary assertion.]["B" 	 ]]
  	[[120][The character which when preceded by an escape character represents the word-start boundary assertion.]["<" 	 ]]
  	[[121][The character which when preceded by an escape character represents the word-end boundary assertion.][">" 	 ]]
  	[[122][The character which when preceded by an escape character represents any word character.]["w" 	 ]]
  	[[123][The character which when preceded by an escape character represents a non-word character.]["W" 	 ]]
  	[[124][The character which when preceded by an escape character represents a start of buffer assertion.]["`A" 	 ]]
  	[[125][The character which when preceded by an escape character represents an end of buffer assertion.]["'z" 	 ]]
  	[[126][The newline character. ]["\\n" 	 ]]
  	[[127][The comma separator.]["," 	 ]]
  	[[128][The character which when preceded by an escape character represents the bell character.]["a" 	 ]]
  	[[129][The character which when preceded by an escape character represents the form feed character.]["f" 	 ]]
  	[[130][The character which when preceded by an escape character represents the newline character.]["n" 	 ]]
  	[[131][The character which when preceded by an escape character represents the carriage return character.]["r" 	 ]]
  	[[132][The character which when preceded by an escape character represents the tab character.]["t" 	 ]]
  	[[133][The character which when preceded by an escape character represents the vertical tab character.]["v" 	 ]]
  	[[134][The character which when preceded by an escape character represents the start of a hexadecimal character constant.]["x" 	 ]]
  	[[135][The character which when preceded by an escape character represents the start of an ASCII escape character.]["c" 	 ]]
  	[[136][The colon character.][":" 	 ]]
  	[[137][The equals character.]["=" 	 ]]
  	[[138][The character which when preceded by an escape character represents the ASCII escape character.]["e" 	 ]]
  	[[139][The character which when preceded by an escape character represents any lower case character.]["l" 	 ]]
  	[[140][The character which when preceded by an escape character represents any non-lower case character.]["L" 	 ]]
  	[[141][The character which when preceded by an escape character represents any upper case character.]["u" 	 ]]
  	[[142][The character which when preceded by an escape character represents any non-upper case character.]["U" 	 ]]
  	[[143][The character which when preceded by an escape character represents any space character.]["s" 	 ]]
  	[[144][The character which when preceded by an escape character represents any non-space character.]["S" 	 ]]
  	[[145][The character which when preceded by an escape character represents any digit character.]["d" 	 ]]
  	[[146][The character which when preceded by an escape character represents any non-digit character.]["D" 	 ]]
  	[[147][The character which when preceded by an escape character represents the end quote operator.]["E" 	 ]]
  	[[148][The character which when preceded by an escape character represents the start quote operator.]["Q" 	 ]]
  	[[149][The character which when preceded by an escape character represents a Unicode combining character sequence.]["X" 	 ]]
  	[[150][The character which when preceded by an escape character represents any single character.]["C" 	 ]]
  	[[151][The character which when preceded by an escape character represents end of buffer operator.]["Z" 	 ]]
  	[[152][The character which when preceded by an escape character represents the continuation assertion.]["G" 	 ]]
  	[[153][The character which when preceeded by (? indicates a zero width negated forward lookahead assert.][! 	 ]]
]

Custom error messages are loaded as follows: 

[table
  	[[Message ID][Error message ID][Default string 	 ]]
  	[[201][REG_NOMATCH]["No match" 	 ]]
  	[[202][REG_BADPAT]["Invalid regular expression" 	 ]]
  	[[203][REG_ECOLLATE]["Invalid collation character" 	 ]]
  	[[204][REG_ECTYPE]["Invalid character class name" 	 ]]
  	[[205][REG_EESCAPE]["Trailing backslash" 	 ]]
  	[[206][REG_ESUBREG]["Invalid back reference" 	 ]]
  	[[207][REG_EBRACK]["Unmatched [ or [^" 	 ]]
  	[[208][REG_EPAREN]["Unmatched ( or \\(" 	 ]]
  	[[209][REG_EBRACE]["Unmatched \\{" 	 ]]
  	[[210][REG_BADBR]["Invalid content of \\{\\}" 	 ]]
  	[[211][REG_ERANGE]["Invalid range end" 	 ]]
  	[[212][REG_ESPACE]["Memory exhausted" 	 ]]
  	[[213][REG_BADRPT]["Invalid preceding regular expression" 	 ]]
  	[[214][REG_EEND]["Premature end of regular expression" 	 ]]
  	[[215][REG_ESIZE]["Regular expression too big" 	 ]]
  	[[216][REG_ERPAREN]["Unmatched ) or \\)" 	 ]]
  	[[217][REG_EMPTY]["Empty expression" 	 ]]
  	[[218][REG_E_UNKNOWN]["Unknown error" 	 ]]
]

Custom character class names are loaded as followed: 

[table
  	[[Message ID][Description][Equivalent default class name 	 ]]
  	[[300][The character class name for alphanumeric characters.]["alnum" 	 ]]
  	[[301][The character class name for alphabetic characters.]["alpha" 	 ]]
  	[[302][The character class name for control characters.]["cntrl" 	 ]]
  	[[303][The character class name for digit characters.]["digit" 	 ]]
  	[[304][The character class name for graphics characters.]["graph" 	 ]]
  	[[305][The character class name for lower case characters.]["lower" 	 ]]
  	[[306][The character class name for printable characters.]["print" 	 ]]
  	[[307][The character class name for punctuation characters.]["punct" 	 ]]
  	[[308][The character class name for space characters.]["space" 	 ]]
  	[[309][The character class name for upper case characters.]["upper" 	 ]]
  	[[310][The character class name for hexadecimal characters.]["xdigit" 	 ]]
  	[[311][The character class name for blank characters.]["blank" 	 ]]
  	[[312][The character class name for word characters.]["word" 	 ]]
  	[[313][The character class name for Unicode characters.]["unicode" 	 ]]
]

Finally, custom collating element names are loaded starting from message 
id 400, and terminating when the first load thereafter fails. Each message 
looks something like: "tagname string" where tagname is the name used 
inside [[.tagname.]] and string is the actual text of the collating element. 
Note that the value of collating element [[.zero.]] is used for the 
conversion of strings to numbers - if you replace this with another value then 
that will be used for string parsing - for example use the Unicode 
character 0x0660 for [[.zero.]] if you want to use Unicode Arabic-Indic 
digits in your regular expressions in place of Latin digits.

Note that the POSIX defined names for character classes and collating elements 
are always available - even if custom names are defined, in contrast, 
custom error messages, and custom syntax messages replace the default ones.

[endsect]