# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
# 
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
# 
# Permission is hereby granted to use or copy this program
# for any purpose,  provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.
#
# Original author: Tom Tromey
# Severely truncated by Hans-J. Boehm
# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
# Modified by: Petter Urkedal <petter.urkedal@nordita.dk> (2005-04)

# 
# 
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
# 
# Permission is hereby granted to use or copy this program
# for any purpose,  provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.
#
# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
# Modified by: Petter Urkedal <petter.urkedal@nordita.dk>

#
#
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
#
# Permission is hereby granted to use or copy this program
# for any purpose,  provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.

# 
# 
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
# 
# Permission is hereby granted to use or copy this program
# for any purpose,  provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.
#
# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
# Modified by: Petter Urkedal <petter.urkedal@nordita.dk>


srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
check_PROGRAMS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \
	$(am__EXEEXT_1) $(am__EXEEXT_2)

# C Library: Architecture Dependent
# ---------------------------------
@PTHREADS_TRUE@am__append_1 = pthread_support.c pthread_stop_world.c
@DARWIN_THREADS_TRUE@am__append_2 = darwin_stop_world.c
@WIN32_THREADS_TRUE@am__append_3 = win32_threads.c

# C++ Interface
# -------------
@CPLUSPLUS_TRUE@am__append_4 = libgccpp.la
@CPLUSPLUS_TRUE@am__append_5 = include/gc_cpp.h include/gc_allocator.h
DIST_COMMON = $(am__configure_deps) $(am__pkginclude_HEADERS_DIST) \
	$(dist_noinst_HEADERS) $(dist_noinst_SCRIPTS) \
	$(dist_pkgconfig_DATA) $(dist_pkgdata_DATA) $(include_HEADERS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/bdw-gc.pc.in $(srcdir)/cord/cord.am \
	$(srcdir)/doc/doc.am $(srcdir)/include/include.am \
	$(srcdir)/tests/tests.am $(top_srcdir)/configure ChangeLog \
	compile config.guess config.sub depcomp install-sh ltmain.sh \
	missing mkinstalldirs

#TESTS += tracetest$(EXEEXT)
#check_PROGRAMS += tracetest
#tracetest_SOURCES = tests/trace_test.c
#tracetest_LDADD = $(test_ldadd)
@THREADS_TRUE@am__append_6 = threadleaktest$(EXEEXT)
@THREADS_TRUE@am__append_7 = threadleaktest
@CPLUSPLUS_TRUE@am__append_8 = test_cpp$(EXEEXT)
@CPLUSPLUS_TRUE@am__append_9 = test_cpp
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/libtool.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES = bdw-gc.pc
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \
	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" \
	"$(DESTDIR)$(pkgincludedir)"
libLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(lib_LTLIBRARIES)
libcord_la_DEPENDENCIES = $(top_builddir)/libgc.la
am__dirstamp = $(am__leading_dot)dirstamp
am_libcord_la_OBJECTS = cord/cordbscs.lo cord/cordprnt.lo \
	cord/cordtest.lo cord/cordxtra.lo
libcord_la_OBJECTS = $(am_libcord_la_OBJECTS)
am__DEPENDENCIES_1 =
am__libgc_la_SOURCES_DIST = allchblk.c alloc.c blacklst.c checksums.c \
	dbg_mlc.c dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c \
	headers.c malloc.c mallocx.c mark.c mark_rts.c misc.c \
	new_hblk.c obj_map.c os_dep.c pcr_interface.c ptr_chck.c \
	real_malloc.c reclaim.c specific.c stubborn.c typd_mlc.c \
	backgraph.c thread_local_alloc.c pthread_support.c \
	pthread_stop_world.c darwin_stop_world.c win32_threads.c
@PTHREADS_TRUE@am__objects_1 = pthread_support.lo \
@PTHREADS_TRUE@	pthread_stop_world.lo
@DARWIN_THREADS_TRUE@am__objects_2 = darwin_stop_world.lo
@WIN32_THREADS_TRUE@am__objects_3 = win32_threads.lo
am_libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \
	dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo \
	headers.lo malloc.lo mallocx.lo mark.lo mark_rts.lo misc.lo \
	new_hblk.lo obj_map.lo os_dep.lo pcr_interface.lo ptr_chck.lo \
	real_malloc.lo reclaim.lo specific.lo stubborn.lo typd_mlc.lo \
	backgraph.lo thread_local_alloc.lo $(am__objects_1) \
	$(am__objects_2) $(am__objects_3)
@NEED_ATOMIC_OPS_ASM_FALSE@@USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_OBJECTS = atomic_ops.lo
@NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_OBJECTS =  \
@NEED_ATOMIC_OPS_ASM_TRUE@	atomic_ops_sysdeps.lo
libgc_la_OBJECTS = $(am_libgc_la_OBJECTS) $(nodist_libgc_la_OBJECTS)
@CPLUSPLUS_TRUE@libgccpp_la_DEPENDENCIES = $(top_builddir)/libgc.la
am__libgccpp_la_SOURCES_DIST = gc_cpp.cc
@CPLUSPLUS_TRUE@am_libgccpp_la_OBJECTS = gc_cpp.lo
libgccpp_la_OBJECTS = $(am_libgccpp_la_OBJECTS)
@CPLUSPLUS_TRUE@am_libgccpp_la_rpath = -rpath $(libdir)
@THREADS_TRUE@am__EXEEXT_1 = threadleaktest$(EXEEXT)
@CPLUSPLUS_TRUE@am__EXEEXT_2 = test_cpp$(EXEEXT)
am_gctest_OBJECTS = tests/test.$(OBJEXT)
gctest_OBJECTS = $(am_gctest_OBJECTS)
am__DEPENDENCIES_2 = $(top_builddir)/libgc.la $(am__DEPENDENCIES_1)
am_leaktest_OBJECTS = tests/leak_test.$(OBJEXT)
leaktest_OBJECTS = $(am_leaktest_OBJECTS)
leaktest_DEPENDENCIES = $(am__DEPENDENCIES_2)
am_middletest_OBJECTS = tests/middle.$(OBJEXT)
middletest_OBJECTS = $(am_middletest_OBJECTS)
middletest_DEPENDENCIES = $(am__DEPENDENCIES_2)
am__test_cpp_SOURCES_DIST = tests/test_cpp.cc
@CPLUSPLUS_TRUE@am_test_cpp_OBJECTS = tests/test_cpp.$(OBJEXT)
test_cpp_OBJECTS = $(am_test_cpp_OBJECTS)
@CPLUSPLUS_TRUE@test_cpp_DEPENDENCIES = libgccpp.la \
@CPLUSPLUS_TRUE@	$(am__DEPENDENCIES_2)
am__threadleaktest_SOURCES_DIST = tests/thread_leak_test.c
@THREADS_TRUE@am_threadleaktest_OBJECTS =  \
@THREADS_TRUE@	tests/thread_leak_test.$(OBJEXT)
threadleaktest_OBJECTS = $(am_threadleaktest_OBJECTS)
@THREADS_TRUE@threadleaktest_DEPENDENCIES = $(am__DEPENDENCIES_2)
SCRIPTS = $(dist_noinst_SCRIPTS)
DEFAULT_INCLUDES = 
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
LTCCASCOMPILE = $(LIBTOOL) --mode=compile $(CCAS) $(AM_CCASFLAGS) \
	$(CCASFLAGS)
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libcord_la_SOURCES) $(libgc_la_SOURCES) \
	$(EXTRA_libgc_la_SOURCES) $(nodist_libgc_la_SOURCES) \
	$(libgccpp_la_SOURCES) $(gctest_SOURCES) $(leaktest_SOURCES) \
	$(middletest_SOURCES) $(test_cpp_SOURCES) \
	$(threadleaktest_SOURCES)
DIST_SOURCES = $(libcord_la_SOURCES) $(am__libgc_la_SOURCES_DIST) \
	$(EXTRA_libgc_la_SOURCES) $(am__libgccpp_la_SOURCES_DIST) \
	$(gctest_SOURCES) $(leaktest_SOURCES) $(middletest_SOURCES) \
	$(am__test_cpp_SOURCES_DIST) \
	$(am__threadleaktest_SOURCES_DIST)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
dist_pkgconfigDATA_INSTALL = $(INSTALL_DATA)
dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_pkgconfig_DATA) $(dist_pkgdata_DATA)
includeHEADERS_INSTALL = $(INSTALL_HEADER)
am__pkginclude_HEADERS_DIST = include/gc_cpp.h include/gc_allocator.h \
	include/gc.h include/gc_typed.h include/gc_inline.h \
	include/gc_mark.h include/weakpointer.h include/new_gc_alloc.h \
	include/gc_backptr.h include/gc_gcj.h include/leak_detector.h \
	include/gc_amiga_redirects.h include/gc_pthread_redirects.h \
	include/gc_config_macros.h include/gc_tiny_fl.h
pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(dist_noinst_HEADERS) $(include_HEADERS) \
	$(pkginclude_HEADERS)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@ $(DEFS)
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
COMPILER_XLC_FALSE = @COMPILER_XLC_FALSE@
COMPILER_XLC_TRUE = @COMPILER_XLC_TRUE@
CPLUSPLUS_FALSE = @CPLUSPLUS_FALSE@
CPLUSPLUS_TRUE = @CPLUSPLUS_TRUE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CXXINCLUDES = @CXXINCLUDES@
CYGPATH_W = @CYGPATH_W@
DARWIN_THREADS_FALSE = @DARWIN_THREADS_FALSE@
DARWIN_THREADS_TRUE = @DARWIN_THREADS_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_GCJ_SUPPORT_FALSE = @ENABLE_GCJ_SUPPORT_FALSE@
ENABLE_GCJ_SUPPORT_TRUE = @ENABLE_GCJ_SUPPORT_TRUE@
EXEEXT = @EXEEXT@
EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
F77 = @F77@
FFLAGS = @FFLAGS@
GC_CFLAGS = @GC_CFLAGS@
GC_VERSION = @GC_VERSION@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
NEED_ATOMIC_OPS_ASM_FALSE = @NEED_ATOMIC_OPS_ASM_FALSE@
NEED_ATOMIC_OPS_ASM_TRUE = @NEED_ATOMIC_OPS_ASM_TRUE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PTHREADS_FALSE = @PTHREADS_FALSE@
PTHREADS_TRUE = @PTHREADS_TRUE@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
THREADDLLIBS = @THREADDLLIBS@
THREADS_FALSE = @THREADS_FALSE@
THREADS_TRUE = @THREADS_TRUE@
UNWINDLIBS = @UNWINDLIBS@
USE_INTERNAL_LIBATOMIC_OPS_FALSE = @USE_INTERNAL_LIBATOMIC_OPS_FALSE@
USE_INTERNAL_LIBATOMIC_OPS_TRUE = @USE_INTERNAL_LIBATOMIC_OPS_TRUE@
USE_LIBDIR_FALSE = @USE_LIBDIR_FALSE@
USE_LIBDIR_TRUE = @USE_LIBDIR_TRUE@
VERSION = @VERSION@
WIN32_THREADS_FALSE = @WIN32_THREADS_FALSE@
WIN32_THREADS_TRUE = @WIN32_THREADS_TRUE@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
addlibs = @addlibs@
addobjs = @addobjs@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
atomic_ops_libs = @atomic_ops_libs@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
extra_ldflags_libgc = @extra_ldflags_libgc@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_all = @target_all@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@

# We currently use the source files directly from libatomic_ops, if we
# use the internal version.  This is done since libatomic_ops doesn't
# use libtool, since it has no real use for it.  But that seems to make
# it hard to use either the resulting object files or libraries.
# Thus there seems too be no real reason to recusively build in the
# libatomic_ops directory.
# if USE_INTERNAL_LIBATOMICS_OPS
# SUBDIRS = @maybe_libatomic_ops@
# else
# SUBDIRS =
# endif
SUBDIRS = 

# Initialize variables so that we can declare files locally.

# FIXME: If Visual C++ users use Makefile.am, this should go into
# pkginclude_HEADERS with proper AM_CONDITIONALization.  Otherwise
# delete this comment.

# documentation which is not installed
#

# other makefiles
# :GOTCHA: deliberately we do not include 'Makefile'

# files used by makefiles other than Makefile.am
#

# The libatomic_ops library.  This is not ideal, since we pick up junk from
# there.  The hard-coded version number should also go.

# :FIXME: why do we distribute this one???
#
EXTRA_DIST = gc_cpp.cpp README.QUICK BCC_MAKEFILE NT_MAKEFILE \
	NT_THREADS_MAKEFILE OS2_MAKEFILE PCR-Makefile digimars.mak \
	EMX_MAKEFILE Makefile.direct Makefile.dj Makefile.DLLs \
	SMakefile.amiga WCC_MAKEFILE configure_atomic_ops.sh \
	NT_STATIC_THREADS_MAKEFILE NT_X64_STATIC_THREADS_MAKEFILE \
	add_gc_prefix.c gcname.c if_mach.c if_not_there.c \
	hpux_test_and_clear.s gc.mak MacOS.c MacProjects.sit.hqx \
	mach_dep.c setjmp_t.c threadlibs.c AmigaOS.c \
	Mac_files/datastart.c Mac_files/dataend.c \
	Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
	include/private/msvc_dbg.h msvc_dbg.c libatomic_ops-1.2 \
	libtool.m4 cord/cordbscs.c cord/cordtest.c cord/de.c \
	cord/cordprnt.c cord/cordxtra.c cord/de_cmds.h cord/de_win.h \
	cord/de_win.c cord/de_win.RC cord/de_win.ICO

# C Library
# ---------
lib_LTLIBRARIES = libgc.la $(am__append_4) libcord.la
include_HEADERS = 

# installed headers
#
pkginclude_HEADERS = $(am__append_5) include/gc.h include/gc_typed.h \
	include/gc_inline.h include/gc_mark.h include/gc_cpp.h \
	include/weakpointer.h include/new_gc_alloc.h \
	include/gc_allocator.h include/gc_backptr.h include/gc_gcj.h \
	include/leak_detector.h include/gc_amiga_redirects.h \
	include/gc_pthread_redirects.h include/gc_config_macros.h \
	include/gc_tiny_fl.h

# headers which are not installed
# (see include/include.am for more)
#

# headers which are not installed
#
dist_noinst_HEADERS = version.h include/private/gc_hdrs.h \
	include/private/gc_priv.h include/private/gcconfig.h \
	include/private/gc_pmark.h include/private/gc_locks.h \
	include/private/dbg_mlc.h include/private/specific.h \
	include/private/cord_pos.h include/private/pthread_support.h \
	include/private/pthread_stop_world.h \
	include/private/darwin_semaphore.h \
	include/private/darwin_stop_world.h \
	include/private/thread_local_alloc.h include/cord.h \
	include/ec.h include/javaxfc.h
TESTS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \
	$(am__append_6) $(am__append_8)
pkgconfigdir = $(libdir)/pkgconfig
dist_pkgconfig_DATA = bdw-gc.pc
libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
	dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c malloc.c \
	mallocx.c mark.c mark_rts.c misc.c new_hblk.c obj_map.c \
	os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
	specific.c stubborn.c typd_mlc.c backgraph.c \
	thread_local_alloc.c $(am__append_1) $(am__append_2) \
	$(am__append_3)
@NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_SOURCES = atomic_ops_sysdeps.S
@USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_SOURCES = atomic_ops.c

# Include THREADDLLIBS here to ensure that the correct versions of
# linuxthread semaphore functions get linked:
libgc_la_LIBADD = @addobjs@ $(THREADDLLIBS) $(UNWINDLIBS)
libgc_la_DEPENDENCIES = @addobjs@
libgc_la_LDFLAGS = $(extra_ldflags_libgc) -version-info 1:3:0 -no-undefined
EXTRA_libgc_la_SOURCES = alpha_mach_dep.S \
    mips_sgi_mach_dep.s mips_ultrix_mach_dep.s \
    rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \
    sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s

@CPLUSPLUS_TRUE@libgccpp_la_SOURCES = gc_cpp.cc
@CPLUSPLUS_TRUE@libgccpp_la_LIBADD = $(top_builddir)/libgc.la
@CPLUSPLUS_TRUE@libgccpp_la_LDFLAGS = -version-info 1:3:0 -no-undefined

# Misc
# ----
AM_CXXFLAGS = @GC_CFLAGS@
AM_CFLAGS = @GC_CFLAGS@
@COMPILER_XLC_FALSE@ASM_CPP_OPTIONS = -Wp,-P -x assembler-with-cpp

#all_objs = @addobjs@ $(libgc_la_OBJECTS)
#$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
#include/private/gc_hdrs.h include/gc.h include/gc_gcj.h \
#include/gc_pthread_redirects.h include/gc_config_macros.h \
#include/private/thread_local_alloc.h include/private_support.h \
#include/private/pthread_stop_world.h \
#include/gc_mark.h @addincludes@
@COMPILER_XLC_TRUE@ASM_CPP_OPTIONS = 
dist_noinst_SCRIPTS = callprocs configure.host

# this is an auxiliary shell file used by Makefile and Makefile.direct
#
CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
libcord_la_LIBADD = $(top_builddir)/libgc.la
libcord_la_LDFLAGS = -version-info 1:3:0 -no-undefined
libcord_la_SOURCES = \
	cord/cordbscs.c				\
	cord/cordprnt.c				\
	cord/cordtest.c				\
	cord/cordxtra.c				


# Common libs to _LDADD for all tests.
test_ldadd = $(top_builddir)/libgc.la $(EXTRA_TEST_LIBS)
gctest_SOURCES = tests/test.c
gctest_LDADD = $(test_ldadd)
gctest_DEPENDENCIES = $(top_builddir)/libgc.la
leaktest_SOURCES = tests/leak_test.c
leaktest_LDADD = $(test_ldadd)
middletest_SOURCES = tests/middle.c
middletest_LDADD = $(test_ldadd)
@THREADS_TRUE@threadleaktest_SOURCES = tests/thread_leak_test.c
@THREADS_TRUE@threadleaktest_LDADD = $(test_ldadd)
@CPLUSPLUS_TRUE@test_cpp_SOURCES = tests/test_cpp.cc
@CPLUSPLUS_TRUE@test_cpp_LDADD = libgccpp.la $(test_ldadd)

# installed documentation
#
dist_pkgdata_DATA = \
	doc/barrett_diagram \
	doc/debugging.html \
	doc/gc.man \
	doc/gcdescr.html \
	doc/README \
	doc/README.amiga \
	doc/README.arm.cross \
	doc/README.autoconf \
	doc/README.changes \
	doc/README.contributors \
	doc/README.cords \
	doc/README.DGUX386 \
	doc/README.dj \
	doc/README.environment \
	doc/README.ews4800 \
	doc/README.hp \
	doc/README.linux \
	doc/README.Mac \
	doc/README.MacOSX \
	doc/README.macros \
	doc/README.OS2 \
	doc/README.rs6000 \
	doc/README.sgi \
	doc/README.solaris2 \
	doc/README.uts \
	doc/README.win32 \
	doc/README.win64 \
	doc/overview.html \
	doc/tree.html \
	doc/leak.html \
	doc/gcinterface.html \
	doc/scale.html \
	doc/README.darwin \
	doc/simple_example.html \
	doc/porting.html

all: all-recursive

.SUFFIXES:
.SUFFIXES: .S .c .cc .lo .o .obj .s
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/include/include.am $(srcdir)/cord/cord.am $(srcdir)/tests/tests.am $(srcdir)/doc/doc.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
bdw-gc.pc: $(top_builddir)/config.status $(srcdir)/bdw-gc.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    f=$(am__strip_dir) \
	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
	  else :; fi; \
	done

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  p=$(am__strip_dir) \
	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
cord/$(am__dirstamp):
	@$(mkdir_p) cord
	@: > cord/$(am__dirstamp)
cord/$(DEPDIR)/$(am__dirstamp):
	@$(mkdir_p) cord/$(DEPDIR)
	@: > cord/$(DEPDIR)/$(am__dirstamp)
cord/cordbscs.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
cord/cordprnt.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
cord/cordtest.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
cord/cordxtra.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
libcord.la: $(libcord_la_OBJECTS) $(libcord_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libcord_la_LDFLAGS) $(libcord_la_OBJECTS) $(libcord_la_LIBADD) $(LIBS)
libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS)
libgccpp.la: $(libgccpp_la_OBJECTS) $(libgccpp_la_DEPENDENCIES) 
	$(CXXLINK) $(am_libgccpp_la_rpath) $(libgccpp_la_LDFLAGS) $(libgccpp_la_OBJECTS) $(libgccpp_la_LIBADD) $(LIBS)

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
tests/$(am__dirstamp):
	@$(mkdir_p) tests
	@: > tests/$(am__dirstamp)
tests/$(DEPDIR)/$(am__dirstamp):
	@$(mkdir_p) tests/$(DEPDIR)
	@: > tests/$(DEPDIR)/$(am__dirstamp)
tests/test.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) 
	@rm -f gctest$(EXEEXT)
	$(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS)
tests/leak_test.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
leaktest$(EXEEXT): $(leaktest_OBJECTS) $(leaktest_DEPENDENCIES) 
	@rm -f leaktest$(EXEEXT)
	$(LINK) $(leaktest_LDFLAGS) $(leaktest_OBJECTS) $(leaktest_LDADD) $(LIBS)
tests/middle.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
middletest$(EXEEXT): $(middletest_OBJECTS) $(middletest_DEPENDENCIES) 
	@rm -f middletest$(EXEEXT)
	$(LINK) $(middletest_LDFLAGS) $(middletest_OBJECTS) $(middletest_LDADD) $(LIBS)
tests/test_cpp.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
test_cpp$(EXEEXT): $(test_cpp_OBJECTS) $(test_cpp_DEPENDENCIES) 
	@rm -f test_cpp$(EXEEXT)
	$(CXXLINK) $(test_cpp_LDFLAGS) $(test_cpp_OBJECTS) $(test_cpp_LDADD) $(LIBS)
tests/thread_leak_test.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
threadleaktest$(EXEEXT): $(threadleaktest_OBJECTS) $(threadleaktest_DEPENDENCIES) 
	@rm -f threadleaktest$(EXEEXT)
	$(LINK) $(threadleaktest_LDFLAGS) $(threadleaktest_OBJECTS) $(threadleaktest_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f cord/cordbscs.$(OBJEXT)
	-rm -f cord/cordbscs.lo
	-rm -f cord/cordprnt.$(OBJEXT)
	-rm -f cord/cordprnt.lo
	-rm -f cord/cordtest.$(OBJEXT)
	-rm -f cord/cordtest.lo
	-rm -f cord/cordxtra.$(OBJEXT)
	-rm -f cord/cordxtra.lo
	-rm -f tests/leak_test.$(OBJEXT)
	-rm -f tests/middle.$(OBJEXT)
	-rm -f tests/test.$(OBJEXT)
	-rm -f tests/test_cpp.$(OBJEXT)
	-rm -f tests/thread_leak_test.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allchblk.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atomic_ops.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backgraph.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blacklst.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checksums.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/darwin_stop_world.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbg_mlc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_load.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/finalize.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_cpp.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_dlopen.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcj_mlc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/headers.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/malloc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mallocx.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark_rts.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new_hblk.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obj_map.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_dep.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcr_interface.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_stop_world.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_support.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptr_chck.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/real_malloc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reclaim.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/specific.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stubborn.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread_local_alloc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/typd_mlc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/win32_threads.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordbscs.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordprnt.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordtest.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordxtra.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/leak_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/middle.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_cpp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/thread_leak_test.Po@am__quote@

.S.o:
	$(CCASCOMPILE) -c $<

.S.obj:
	$(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`

.c.o:
@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

.cc.o:
@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<

.s.o:
	$(CCASCOMPILE) -c $<

.s.obj:
	$(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
	-rm -rf cord/.libs cord/_libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-dist_pkgconfigDATA: $(dist_pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(dist_pkgconfig_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  $(dist_pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done

uninstall-dist_pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgconfig_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
	done
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
	  $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
	done

uninstall-dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
	done
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
	@list='$(include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
	done
install-pkgincludeHEADERS: $(pkginclude_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)"
	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
	done

uninstall-pkgincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list='$(TESTS)'; \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		echo "XPASS: $$tst"; \
	      ;; \
	      *) \
		echo "PASS: $$tst"; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xfail=`expr $$xfail + 1`; \
		echo "XFAIL: $$tst"; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		echo "FAIL: $$tst"; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      echo "SKIP: $$tst"; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="All $$all tests passed"; \
	    else \
	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all tests failed"; \
	    else \
	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    skipped="($$skip tests were not run)"; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkdir_p) $(distdir)/. $(distdir)/Mac_files $(distdir)/cord $(distdir)/doc $(distdir)/include $(distdir)/include/private $(distdir)/tests
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(DATA) $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(pkgincludedir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-rm -f cord/$(DEPDIR)/$(am__dirstamp)
	-rm -f cord/$(am__dirstamp)
	-rm -f tests/$(DEPDIR)/$(am__dirstamp)
	-rm -f tests/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
	clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-dist_pkgconfigDATA install-dist_pkgdataDATA \
	install-includeHEADERS install-pkgincludeHEADERS

install-exec-am: install-libLTLIBRARIES

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \
	uninstall-includeHEADERS uninstall-info-am \
	uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-TESTS check-am clean clean-checkPROGRAMS clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-recursive ctags \
	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
	dist-tarZ dist-zip distcheck distclean distclean-compile \
	distclean-generic distclean-libtool distclean-recursive \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dist_pkgconfigDATA \
	install-dist_pkgdataDATA install-exec install-exec-am \
	install-includeHEADERS install-info install-info-am \
	install-libLTLIBRARIES install-man install-pkgincludeHEADERS \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \
	uninstall-includeHEADERS uninstall-info-am \
	uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS

.s.lo:
	$(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $<

.S.lo:
	$(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $<

#
# :GOTCHA: GNU make rule for making .s out of .S is flawed, 
# it will not remove dest if building fails
.S.s:
	if $(CPP) $< >$@ ; then :; else rm -f $@; fi

# Putting these at the top causes cord to be built first, and not find libgc.a
# on HP/UX.  There may be a better fix.
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: