commit 914f235feafd8def3318a22c772a10c3077d0af0
author Igor Sarkisov <isarkisov@google.com> Tue Oct 06 05:39:43 2020 -0700
committer Igor Sarkisov <isarkisov@google.com> Tue Oct 06 05:39:43 2020 -0700
tree ebdad7c2025a38fcc5ec33d2955ee78415169396

Project import

Makefile

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..d0922e0
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,275 @@
+#
+#    Copyright (c) 2010-2012 Nest Labs, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the makefile for the Linux kernel.
+#
+
+.NOTPARALLEL:
+
+include pre.mak
+
+PackageRoot			:= .
+
+PackageSeparator		:=
+
+PackageSourceDir		:= $(PackageRoot)/$(LinuxPackageName)
+
+PackageBuildConfig		:= $(call GenerateBuildPaths,.config)
+PackageBuildMakefile		:= $(call GenerateBuildPaths,Makefile)
+
+CleanPaths			+= $(PackageLicenseFile)
+
+UBootFolder			:= fw/u-boot
+UBootMkimage			:= bin/mkimage
+
+MKIMAGE				:= $(call GenerateResultPaths,$(UBootFolder),$(UBootMkimage))
+MAKE_FIT			:= ${BuildRoot}/boot/usb-loader-imx/scripts/make_fit.sh
+CP				:= cp
+
+#
+# Configuration
+#
+# Kernel default configuration is handled from most-specific to
+# least-specific, as follows:
+#
+#   Out-of-tree:
+#
+#     1) If configs/$(BuildProduct)/$(BuildConfig)_defconfig exists,
+#        it is used.
+#     2) If configs/$(BuildProduct)/defconfig exists, it is used.
+#     3) If configs/$(BuildConfig)_defconfig exists, it is used.
+#     4) If configs/defconfig exists, it is used.
+#
+#   In-tree:
+#
+#     5) If none of those exist, $(LinuxDefaultConfig) is used, which
+#        refers to an architecture- and/or board-specific default
+#        configuration.
+#
+# We go through this elaborate scheme because, once created, the
+# kernel loses all association with it configuration file and the
+# source it was created from. As a consequence, if the default
+# configuration is edited, the kernel doesn't know about the
+# change. This is especially problematic when changing branches or
+# receiving updates to the default configuration and the kernel
+# doesn't rebuild to reflect those changes.
+#
+# With this scheme, the user can edit .config as before. However, now
+# if the default configuration is changed, out-of-tree only, .config
+# is updated and the kernel will rebuild to reflect those changes.
+#
+
+PackageConfigDir		:= configs
+PackageProjectConfig		:= $(PackageConfigDir)/defconfig
+PackageConfigConfig		:= $(PackageConfigDir)/$(BuildConfig)_defconfig
+PackageProductConfig		:= $(PackageConfigDir)/$(BuildProduct)/defconfig
+PackageProductConfigConfig	:= $(PackageConfigDir)/$(BuildProduct)/$(BuildConfig)_defconfig
+
+PackageMaybeProjectConfig	:= $(wildcard $(PackageProjectConfig))
+PackageMaybeConfigConfig	:= $(wildcard $(PackageConfigConfig))
+PackageMaybeProductConfig	:= $(wildcard $(PackageProductConfig))
+PackageMaybeProductConfigConfig	:= $(wildcard $(PackageProductConfigConfig))
+
+PackageMaybeConfig		:= $(if $(PackageMaybeProductConfigConfig),$(PackageProductConfigConfig),$(if $(PackageMaybeProductConfig),$(PackageProductConfig),$(if $(PackageMaybeConfigConfig),$(PackageConfigConfig),$(if $(PackageMaybeProjectConfig),$(PackageProjectConfig),))))
+
+PackageSourceConfig     	:= $(if $(PackageMaybeConfig),$(PackageMaybeConfig),)
+
+#
+# Specific products may want additional build targets beyond those
+# produced by the linux build's 'all' target. Process and establish
+# those.
+#
+
+LinuxAllTarget		:= all
+LinuxBuildTargets	:= $(filter-out $(LinuxAllTarget),$(LinuxProductTargets)) $(LinuxAllTarget)
+
+#
+# For some architectures, the linux build requires u-boot's host
+# 'mkimage' tool. Establish some paths and directories that will be
+# used, if present, to help the linux build find it.
+#
+
+MkimagePath		:= $(wildcard $(call GenerateResultPaths,fw/u-boot/bin,mkimage))
+MkimageDir		:= $(call Deslashify,$(dir $(MkimagePath)))
+
+#
+# Architecture-specific boot images that may need to be copied from
+# the build to the result directory.
+#
+
+LinuxBootFolder		= arch/$(LinuxProductArch)/boot
+LinuxBootDir		= $(call GenerateBuildPaths,$(LinuxBootFolder))
+LinuxBootBuildPaths	= $(call GenerateBuildPaths,$(addprefix $(LinuxBootFolder)/,$(LinuxProductBootFiles)))
+LinuxBootResultPaths	= $(call GenerateResultPaths,,$(notdir $(LinuxBootBuildPaths)))
+
+LinuxKernelFiles	= vmlinux
+LinuxKernelFolder	= .
+LinuxKernelDir		= $(call GenerateBuildPaths,$(LinuxKernelFolder))
+LinuxKernelBuildPaths	= $(call GenerateBuildPaths,$(addprefix $(call Slashify,$(LinuxKernelFolder)),$(LinuxKernelFiles)))
+LinuxKernelResultPaths  = $(call GenerateResultPaths,,$(notdir $(LinuxKernelBuildPaths)))
+
+LinuxDtbFolder          = arch/$(LinuxProductArch)/boot/dts
+LinuxDtbDir             = $(call GenerateBuildPaths,$(LinuxDtbFolder))
+LinuxDtbBuildPaths   = $(call GenerateBuildPaths,$(addprefix $(call Slashify,$(LinuxDtbFolder)),$(LinuxDtbFiles)))
+LinuxDtbResultPaths  = $(call GenerateResultPaths,,$(notdir $(LinuxDtbBuildPaths)))
+ifneq ($(words $(LinuxDtbFiles)), $(words $(LinuxDtbNames)))
+  $(error The number of DTB files and DTB names for use in the ITB do not match: $(words $(LinuxDtbFiles)) != $(words $(LinuxDtbNames)))
+else
+  # We need to join the list of DTB files and names for make_fit.sh, so it can generate a FIT with all of the DTB files.
+  # GNU make doesn't do this well (the join function leaves no spaces between the pairs to be joined); this is the most readable solution I could find.
+  i=0
+  dtb_list=
+  $(foreach dtbName, $(LinuxDtbNames), \
+    $(eval i = $(shell expr $(i) + 1)) \
+    $(eval dtb_list += $(abspath $(word $(i),$(LinuxDtbBuildPaths))) $(dtbName)) \
+  )
+endif
+zImageFile			:= zImage
+zImageFolder			:= arch/$(LinuxProductArch)/boot
+zImageResultPath		:= $(call GenerateBuildPaths,$(addprefix $(call Slashify,$(zImageFolder)),$(zImageFile)))
+
+LinuxItbFolder		= arch/$(LinuxProductArch)/boot
+LinuxItbBuildPaths	= $(call GenerateBuildPaths,$(addprefix $(call Slashify,$(LinuxItbFolder)),$(LinuxItbResultFile)))
+LinuxItbResultPaths	= $(call GenerateResultPaths,,$(LinuxItbResultFile))
+
+LinuxConfigsDir		= $(PackageSourceDir)/arch/arm/configs
+#
+# Common make arguments shared by all Linux target commands
+#
+
+LinuxCommonMakeArgs	= $(JOBSFLAG) -C $(PackageSourceDir) O=$(CURDIR)/$(BuildDirectory) ARCH=$(LinuxProductArch)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+	$(copy-result)
+
+# We are building this package from version-controller source, so
+# there is nothing to do for this target goal.
+
+$(PackageSourceDir):
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# The Linux kernel build has no way of explicitly setting CC, LD,
+# OBJCOPY, et al and instead relies on the value of
+# CROSS_COMPILE. Consequently, we have to ensure that 'ToolBinDir' is
+# in 'PATH' so that the kernel build infrastructure can find
+# $(CROSS_COMPILE)gcc, $(CROSS_COMPILE)ld, et al.
+#
+# Additionally, per the above, add the path to U-Boot's 'mkimage' if
+# the variable is defined.
+
+configure build images stage stage-modules: PATH := $(PATH):$(ToolBinDir)$(if $(MkimageDir),:$(MkimageDir),)
+CROSS_COMPILE:= $(CCACHE) $(CROSS_COMPILE)
+
+# Generate the Linux build configuration and make file
+#
+# We are either copying and out-of-tree configuration or using an
+# in-tree default (see above).
+
+# $(PackageBuildConfig): help-defconfig
+
+ifeq ($(PackageSourceConfig),)
+
+DefconfigBasename=$(subst _defconfig,,$(LinuxDefaultConfig))
+ConfigFragment=$(DefconfigBasename)_$(BuildConfig)_fragment
+
+$(PackageBuildConfig): $(LinuxConfigsDir)/$(LinuxDefaultConfig) $(LinuxConfigsDir)/$(ConfigFragment) | $(BuildDirectory)
+	$(Echo) "The default Linux build configuration is \"$(LinuxDefaultConfig)\"."
+	$(Verbose)$(MAKE) $(LinuxCommonMakeArgs) $(LinuxDefaultConfig)
+	$(Echo) "Applying config fragment \"$(ConfigFragment)\"."
+	$(PackageSourceDir)/scripts/kconfig/merge_config.sh -O $(BuildDirectory) -m $(BuildDirectory)/.config $(LinuxConfigsDir)/$(ConfigFragment)
+	$(Echo) "Setting unspecified options to defaults"
+	$(Verbose) yes " " | $(MAKE) $(LinuxCommonMakeArgs) oldconfig
+else
+$(PackageBuildConfig): $(PackageSourceConfig) | $(PackageSourceDir) $(BuildDirectory)
+	$(Echo) "The default Linux build configuration is \"$(PackageSourceConfig)\"."
+	$(copy-result)
+endif
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildConfig)
+
+# Build the source.
+
+.PHONY: build
+build: configure images
+
+# Build the linux kernel images, including vmlinux (ELF).
+
+.PHONY: images
+images: configure | $(BuildDirectory)
+	$(Verbose)$(MAKE) $(LinuxCommonMakeArgs) $(LinuxProductMakeArgs) $(LinuxBuildTargets) $(LinuxDtbFiles)
+
+$(LinuxItbBuildPaths) : images
+	$(Verbose)$(MAKE_FIT) $(MKIMAGE)                                      \
+	                      $(abspath $(zImageResultPath))                  \
+	                      NULL                                            \
+	                      "$(KernelSigningKeyName)"                       \
+	                      "$(KernelSigningKeyURL)"                        \
+	                      $(LinuxItbBuildPaths)                           \
+	                      $(dtb_list)                                                # Combine the kernel and DTBs into a FIT
+
+
+# Stage the build to a temporary installation area.
+
+.PHONY: stage stage-boot stage-modules stage-headers
+stage: stage-boot stage-modules stage-headers
+
+stage-boot stage-modules stage-headers: build | $(ResultDirectory)
+
+stage-modules:
+	$(Verbose)$(MAKE) $(LinuxCommonMakeArgs) INSTALL="$(INSTALL) $(INSTALLFLAGS)" INSTALL_MOD_PATH=$(ResultDirectory) DEPMOD=$(DEPMOD) modules_install
+
+stage-headers:
+	$(Verbose)$(MAKE) $(LinuxCommonMakeArgs) INSTALL="$(INSTALL) $(INSTALLFLAGS)" INSTALL_HDR_PATH=$(ResultDirectory) headers_install
+
+$(LinuxBootResultPaths): $(ResultDirectory)/%: $(LinuxBootDir)/%
+	$(copy-result)
+
+$(LinuxKernelResultPaths): $(ResultDirectory)/%: $(LinuxKernelDir)/%
+	$(copy-result)
+
+$(LinuxDtbResultPaths): $(ResultDirectory)/%: $(LinuxDtbDir)/%
+	$(copy-result)
+
+$(LinuxItbResultPaths): $(LinuxItbBuildPaths)
+	$(copy-result)
+
+stage-boot: $(LinuxDtbResultPaths) $(LinuxItbResultPaths) $(LinuxBootResultPaths) $(LinuxKernelResultPaths)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+.PHONY: help help-defconfig
+help-defconfig:
+	$(echo-defconfig)
+
+help: help-defconfig
+
+include post.mak

configs/diamond/debug_defconfig

diff --git a/configs/diamond/debug_defconfig b/configs/diamond/debug_defconfig
new file mode 100644
index 0000000..9ef6f7b
--- /dev/null
+++ b/configs/diamond/debug_defconfig
@@ -0,0 +1,2190 @@
+#
+# Nest Labs Diamond Debug Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_DIAMOND=y
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+CONFIG_MACH_DIAMOND_BOARD_MULTI=y
+# CONFIG_MACH_J49 is not set
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+# CONFIG_MACH_J49_BOARD_MULTI is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=n
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_LM3530 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/diamond/defconfig

diff --git a/configs/diamond/defconfig b/configs/diamond/defconfig
new file mode 100644
index 0000000..35a8afc
--- /dev/null
+++ b/configs/diamond/defconfig
@@ -0,0 +1,2201 @@
+#
+# Nest Labs Diamond Default Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_TRACEPOINTS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_DIAMOND=y
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+CONFIG_MACH_DIAMOND_BOARD_MULTI=y
+# CONFIG_MACH_J49 is not set
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+# CONFIG_MACH_J49_BOARD_MULTI is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=n
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_LM3530 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/diamond/diagnostics_defconfig

diff --git a/configs/diamond/diagnostics_defconfig b/configs/diamond/diagnostics_defconfig
new file mode 100644
index 0000000..a7c0fbe
--- /dev/null
+++ b/configs/diamond/diagnostics_defconfig
@@ -0,0 +1,2190 @@
+#
+# Nest Labs Diamond Diagnostics Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_DIAMOND=y
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+CONFIG_MACH_DIAMOND_BOARD_MULTI=y
+# CONFIG_MACH_J49 is not set
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+# CONFIG_MACH_J49_BOARD_MULTI is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=n
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_LM3530 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/diamond/release_defconfig

diff --git a/configs/diamond/release_defconfig b/configs/diamond/release_defconfig
new file mode 100644
index 0000000..72b6f88
--- /dev/null
+++ b/configs/diamond/release_defconfig
@@ -0,0 +1,2191 @@
+#
+# Nest Labs Diamond Release Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_DIAMOND=y
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+CONFIG_MACH_DIAMOND_BOARD_MULTI=y
+# CONFIG_MACH_J49 is not set
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+# CONFIG_MACH_J49_BOARD_MULTI is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=n
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_LM3530 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+# CONFIG_USB_DYNAMIC_ACM is not set
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+# CONFIG_NFS_USE_KERNEL_DNS is not set
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+# CONFIG_LOCKD is not set
+# CONFIG_LOCKD_V4 is not set
+# CONFIG_NFS_COMMON is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/j49/debug_defconfig

diff --git a/configs/j49/debug_defconfig b/configs/j49/debug_defconfig
new file mode 100644
index 0000000..91f0542
--- /dev/null
+++ b/configs/j49/debug_defconfig
@@ -0,0 +1,2176 @@
+#
+# Nest Labs J49 Debug Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_DIAMOND is not set
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_MULTI is not set
+CONFIG_MACH_J49=y
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+CONFIG_MACH_J49_BOARD_MULTI=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+CONFIG_OMAP2_DSS_FAKE_VSYNC=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+CONFIG_BACKLIGHT_LM3530=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/j49/defconfig

diff --git a/configs/j49/defconfig b/configs/j49/defconfig
new file mode 100644
index 0000000..e146b9c
--- /dev/null
+++ b/configs/j49/defconfig
@@ -0,0 +1,2195 @@
+#
+# Nest Labs J49 Default Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_TRACEPOINTS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_DIAMOND is not set
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_MULTI is not set
+CONFIG_MACH_J49=y
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+CONFIG_MACH_J49_BOARD_MULTI=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+CONFIG_OMAP2_DSS_FAKE_VSYNC=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+CONFIG_BACKLIGHT_LM3530=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/j49/diagnostics_defconfig

diff --git a/configs/j49/diagnostics_defconfig b/configs/j49/diagnostics_defconfig
new file mode 100644
index 0000000..b3bbb11
--- /dev/null
+++ b/configs/j49/diagnostics_defconfig
@@ -0,0 +1,2170 @@
+#
+# Nest Labs J49 Diagnostics Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_DIAMOND is not set
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_MULTI is not set
+CONFIG_MACH_J49=y
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+CONFIG_MACH_J49_BOARD_MULTI=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+CONFIG_OMAP2_DSS_FAKE_VSYNC=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+CONFIG_BACKLIGHT_LM3530=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+CONFIG_USB_DYNAMIC_ACM=y
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

configs/j49/release_defconfig

diff --git a/configs/j49/release_defconfig b/configs/j49/release_defconfig
new file mode 100644
index 0000000..a04f1d3
--- /dev/null
+++ b/configs/j49/release_defconfig
@@ -0,0 +1,2170 @@
+#
+# Nest Labs J49 Default Configuration
+# Linux kernel version: 2.6.37
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_PLAT_SPEAR is not set
+
+#
+# TI OMAP Common Features
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_CLASS3 is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=y
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# TI OMAP2/3/4 Specific Features
+#
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_TI81XX is not set
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_DIAMOND is not set
+# CONFIG_MACH_DIAMOND_BOARD_DEVELOPMENT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_DIAMOND_BOARD_EVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_DVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_PVT is not set
+# CONFIG_MACH_DIAMOND_BOARD_MULTI is not set
+CONFIG_MACH_J49=y
+# CONFIG_MACH_J49_BOARD_PROTOTYPE is not set
+# CONFIG_MACH_J49_BOARD_EVT is not set
+# CONFIG_MACH_J49_BOARD_DVT is not set
+# CONFIG_MACH_J49_BOARD_PVT is not set
+CONFIG_MACH_J49_BOARD_MULTI=y
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_CRANEBOARD is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+# CONFIG_ARM_ERRATA_743622 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_ARCH_HAS_OPP=y
+CONFIG_PM_OPP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=y
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HL=y
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_DEFRAG_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+# CONFIG_WEXT_SPY is not set
+# CONFIG_WEXT_PRIV is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NET_TCPPROBE is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# Multiple devices driver support
+#
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Power supply class support
+#
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL1251 is not set
+CONFIG_WL12XX=m
+CONFIG_WL1271=m
+# CONFIG_WL1271_SPI is not set
+CONFIG_WL1271_SDIO=m
+CONFIG_WL12XX_PLATFORM_DATA=y
+# CONFIG_WILINK is not set
+# CONFIG_WILINK_GPIO_IRQ is not set
+# CONFIG_WILINK_PADCONF_IRQ_ADDR is not set
+# CONFIG_WILINK_GPIO_ENABLE is not set
+# CONFIG_WILINK_PADCONF_ENABLE_ADDR is not set
+# CONFIG_WILINK_PRINTK is not set
+# CONFIG_WILINK_OMAP3530 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
+CONFIG_INPUT_PWM_BEEPER=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER_LITE=y
+CONFIG_INPUT_ADBS_A330=y
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TI81XX_HDMI is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_SENSORS_TWL4030_MADC=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_TWL6030_PWM is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_IR_CORE is not set
+# CONFIG_VIDEO_IR is not set
+# CONFIG_LIRC is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECOD is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_RC5_SZ_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=2
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_RFBI=y
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set
+CONFIG_OMAP2_DSS_FAKE_VSYNC=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_FB_OMAP2_NUM_FBS=1
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_GIANTPLUS_GPM1145A0 is not set
+CONFIG_PANEL_SAMSUNG_LMS350DF03=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TAAL is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
+CONFIG_PANEL_TIANMA_TM025ZDZ01=y
+CONFIG_PANEL_RENESAS_61529A1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+CONFIG_BACKLIGHT_LM3530=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DIAMOND_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDR is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Platform Glue Layer
+#
+# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
+CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
+# CONFIG_USB_MUSB_AM35X_GLUE is not set
+# CONFIG_USB_MUSB_DAVINCI is not set
+# CONFIG_USB_MUSB_DA8XX is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+CONFIG_USB_MUSB_OMAP2PLUS=y
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_TI81XX is not set
+# CONFIG_USB_MUSB_BLACKFIN is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA_HW=y
+# CONFIG_USB_TI_CPPI_DMA_HW is not set
+# CONFIG_USB_TI_CPPI41_DMA_HW is not set
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_MUSB_HDRC_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+CONFIG_USB_DYNAMIC=y
+# CONFIG_USB_DYNAMIC_ACM is not set
+CONFIG_USB_DYNAMIC_MASS_STORAGE=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# ALS sensor support
+#
+CONFIG_SENSORS_SI1143=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+# CONFIG_NFS_USE_KERNEL_DNS is not set
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+# CONFIG_NFSD is not set
+# CONFIG_LOCKD is not set
+# CONFIG_LOCKD_V4 is not set
+# CONFIG_NFS_COMMON is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_BKL=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_TRACE_IRQFLAGS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+
+#
+# Tracers
+#
+# CONFIG_KPROBE_EVENT is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
+# CONFIG_CRYPTO_DEV_OMAP_AES is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_RANDOMHARVEST is not set
+# CONFIG_OCF_FIPS is not set
+# CONFIG_OCF_CRYPTODEV is not set
+# CONFIG_OCF_CRYPTOSOFT is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_OMAP is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

linux-imx/.mailmap

diff --git a/linux-imx/.mailmap b/linux-imx/.mailmap
new file mode 100644
index 0000000..658003a
--- /dev/null
+++ b/linux-imx/.mailmap
@@ -0,0 +1,118 @@
+#
+# This list is used by git-shortlog to fix a few botched name translations
+# in the git archive, either because the author's full name was messed up
+# and/or not always written the same way, making contributions from the
+# same person appearing not to be so or badly displayed.
+#
+# repo-abbrev: /pub/scm/linux/kernel/git/
+#
+
+Aaron Durbin <adurbin@google.com>
+Adam Oldham <oldhamca@gmail.com>
+Adam Radford <aradford@gmail.com>
+Adrian Bunk <bunk@stusta.de>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
+Alan Cox <root@hraefn.swansea.linux.org.uk>
+Aleksey Gorelov <aleksey_gorelov@phoenix.com>
+Al Viro <viro@ftp.linux.org.uk>
+Al Viro <viro@zenIV.linux.org.uk>
+Andreas Herrmann <aherrman@de.ibm.com>
+Andrew Morton <akpm@osdl.org>
+Andrew Vasquez <andrew.vasquez@qlogic.com>
+Andy Adamson <andros@citi.umich.edu>
+Archit Taneja <archit@ti.com>
+Arnaud Patard <arnaud.patard@rtp-net.org>
+Arnd Bergmann <arnd@arndb.de>
+Axel Dyks <xl@xlsigned.net>
+Axel Lin <axel.lin@gmail.com>
+Ben Gardner <bgardner@wabtec.com>
+Ben M Cahill <ben.m.cahill@intel.com>
+Björn Steinbrink <B.Steinbrink@gmx.de>
+Brian Avery <b.avery@hp.com>
+Brian King <brking@us.ibm.com>
+Christoph Hellwig <hch@lst.de>
+Corey Minyard <minyard@acm.org>
+Damian Hobson-Garcia <dhobsong@igel.co.jp>
+David Brownell <david-b@pacbell.net>
+David Woodhouse <dwmw2@shinybook.infradead.org>
+Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Domen Puncer <domen@coderock.org>
+Douglas Gilbert <dougg@torque.net>
+Ed L. Cashin <ecashin@coraid.com>
+Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+Felipe W Damasio <felipewd@terra.com.br>
+Felix Kuhling <fxkuehl@gmx.de>
+Felix Moeller <felix@derklecks.de>
+Filipe Lautert <filipe@icewall.org>
+Franck Bui-Huu <vagabon.xyz@gmail.com>
+Frank Zago <fzago@systemfabricworks.com>
+Greg Kroah-Hartman <greg@echidna.(none)>
+Greg Kroah-Hartman <gregkh@suse.de>
+Greg Kroah-Hartman <greg@kroah.com>
+Henk Vergonet <Henk.Vergonet@gmail.com>
+Henrik Kretzschmar <henne@nachtwindheim.de>
+Herbert Xu <herbert@gondor.apana.org.au>
+Jacob Shin <Jacob.Shin@amd.com>
+James Bottomley <jejb@mulgrave.(none)>
+James Bottomley <jejb@titanic.il.steeleye.com>
+James E Wilson <wilson@specifix.com>
+James Ketrenos <jketreno@io.(none)>
+Jean Tourrilhes <jt@hpl.hp.com>
+Jeff Garzik <jgarzik@pretzel.yyz.us>
+Jens Axboe <axboe@suse.de>
+Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+John Stultz <johnstul@us.ibm.com>
+Juha Yrjola <at solidboot.com>
+Juha Yrjola <juha.yrjola@nokia.com>
+Juha Yrjola <juha.yrjola@solidboot.com>
+Kay Sievers <kay.sievers@vrfy.org>
+Kenneth W Chen <kenneth.w.chen@intel.com>
+Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+Leonid I Ananiev <leonid.i.ananiev@intel.com>
+Linas Vepstas <linas@austin.ibm.com>
+Mark Brown <broonie@sirena.org.uk>
+Matthieu CASTET <castet.matthieu@free.fr>
+Mayuresh Janorkar <mayur@ti.com>
+Michael Buesch <m@bues.ch>
+Michel Dänzer <michel@tungstengraphics.com>
+Mitesh shah <mshah@teja.com>
+Morten Welinder <terra@gnome.org>
+Morten Welinder <welinder@anemone.rentec.com>
+Morten Welinder <welinder@darter.rentec.com>
+Morten Welinder <welinder@troll.com>
+Mythri P K <mythripk@ti.com>
+Nguyen Anh Quynh <aquynh@gmail.com>
+Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
+Patrick Mochel <mochel@digitalimplant.org>
+Peter A Jonsson <pj@ludd.ltu.se>
+Peter Oruba <peter@oruba.de>
+Peter Oruba <peter.oruba@amd.com>
+Praveen BP <praveenbp@ti.com>
+Rajesh Shah <rajesh.shah@intel.com>
+Ralf Baechle <ralf@linux-mips.org>
+Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+Rémi Denis-Courmont <rdenis@simphalempin.com>
+Rudolf Marek <R.Marek@sh.cvut.cz>
+Rui Saraiva <rmps@joel.ist.utl.pt>
+Sachin P Sant <ssant@in.ibm.com>
+Sam Ravnborg <sam@mars.ravnborg.org>
+Sascha Hauer <s.hauer@pengutronix.de>
+S.Çağlar Onur <caglar@pardus.org.tr>
+Simon Kelley <simon@thekelleys.org.uk>
+Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
+Stephen Hemminger <shemminger@osdl.org>
+Sumit Semwal <sumit.semwal@ti.com>
+Tejun Heo <htejun@gmail.com>
+Thomas Graf <tgraf@suug.ch>
+Tony Luck <tony.luck@intel.com>
+Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <ukl@pengutronix.de>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
+Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
+Gustavo Padovan <gustavo@las.ic.unicamp.br>
+Gustavo Padovan <padovan@profusion.mobi>

linux-imx/.scmversion

diff --git a/linux-imx/.scmversion b/linux-imx/.scmversion
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/linux-imx/.scmversion

linux-imx/COPYING

diff --git a/linux-imx/COPYING b/linux-imx/COPYING
new file mode 100644
index 0000000..ca442d3
--- /dev/null
+++ b/linux-imx/COPYING
@@ -0,0 +1,356 @@
+
+   NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+			Linus Torvalds
+
+----------------------------------------
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

linux-imx/CREDITS

diff --git a/linux-imx/CREDITS b/linux-imx/CREDITS
new file mode 100644
index 0000000..206d0fc
--- /dev/null
+++ b/linux-imx/CREDITS
@@ -0,0 +1,3998 @@
+	This is at least a partial credits-file of people that have
+	contributed to the Linux project.  It is sorted by name and
+	formatted to allow easy grepping and beautification by
+	scripts.  The fields are: name (N), email (E), web-address
+	(W), PGP key ID and fingerprint (P), description (D), and
+	snail-mail address (S).
+	Thanks,
+
+			Linus
+----------
+
+N: Matti Aarnio
+E: mea@nic.funet.fi
+D: Alpha systems hacking, IPv6 and other network related stuff
+D: One of assisting postmasters for vger.kernel.org's lists
+S: (ask for current address)
+S: Finland
+
+N: Dragos Acostachioaie
+E: dragos@iname.com
+W: http://www.arbornet.org/~dragos
+D: /proc/sysvipc
+S: C. Negri 6, bl. D3
+S: Iasi 6600
+S: Romania
+
+N: Mark Adler
+E: madler@alumni.caltech.edu
+W: http://alumnus.caltech.edu/~madler/
+D: zlib decompression
+
+N: Monalisa Agrawal
+E: magrawal@nortelnetworks.com
+D: Basic Interphase 5575 driver with UBR and ABR support.
+S: 75 Donald St, Apt 42
+S: Weymouth, MA 02188
+S: USA
+
+N: Dave Airlie
+E: airlied@linux.ie
+W: http://www.csn.ul.ie/~airlied
+D: NFS over TCP patches
+D: in-kernel DRM Maintainer
+S: Longford, Ireland
+S: Sydney, Australia
+
+N: Tigran A. Aivazian
+E: tigran@aivazian.fsnet.co.uk
+W: http://www.moses.uklinux.net/patches
+D: BFS filesystem
+D: Intel IA32 CPU microcode update support
+D: Various kernel patches
+S: United Kingdom
+
+N: Werner Almesberger
+E: werner@almesberger.net
+W: http://www.almesberger.net/
+D: dosfs, LILO, some fd features, ATM, various other hacks here and there
+S: Buenos Aires
+S: Argentina
+
+N: Tim Alpaerts
+E: tim_alpaerts@toyota-motor-europe.com
+D: 802.2 class II logical link control layer,
+D: the humble start of an opening towards the IBM SNA protocols
+S: Klaproosstraat 72 c 10
+S: B-2610 Wilrijk-Antwerpen
+S: Belgium
+
+N: Anton Altaparmakov
+E: aia21@cantab.net
+W: http://www-stu.christs.cam.ac.uk/~aia21/
+D: Author of new NTFS driver, various other kernel hacks.
+S: Christ's College
+S: Cambridge CB2 3BU
+S: United Kingdom
+
+N: C. Scott Ananian
+E: cananian@alumni.princeton.edu
+W: http://www.pdos.lcs.mit.edu/~cananian
+P: 1024/85AD9EED AD C0 49 08 91 67 DF D7  FA 04 1A EE 09 E8 44 B0
+D: Unix98 pty support.
+D: APM update to 1.2 spec.
+D: /devfs hacking.
+S: 7 Kiwi Loop
+S: Howell, NJ 07731
+S: USA
+
+N: Erik Andersen
+E: andersen@codepoet.org
+W: http://www.codepoet.org/
+P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301  0C82 5F9B 643E 30D3 9057
+D: Maintainer of ide-cd and Uniform CD-ROM driver, 
+D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
+S: 352 North 525 East
+S: Springville, Utah 84663
+S: USA
+
+N: Michael Ang
+E: mang@subcarrier.org
+W: http://www.subcarrier.org/mang
+D: Linux/PA-RISC hacker
+S: 85 Frank St.
+S: Ottawa, Ontario
+S: Canada K2P 0X3
+
+N: H. Peter Anvin
+E: hpa@zytor.com
+W: http://www.zytor.com/~hpa/
+P: 2047/2A960705 BA 03 D3 2C 14 A8 A8 BD  1E DF FE 69 EE 35 BD 74
+D: Author of the SYSLINUX boot loader, maintainer of the linux.* news
+D: hierarchy and the Linux Device List; various kernel hacks
+S: 4390 Albany Drive #46
+S: San Jose, California 95129
+S: USA
+
+N: Andrea Arcangeli
+E: andrea@suse.de
+W: http://www.kernel.org/pub/linux/kernel/people/andrea/
+P: 1024D/68B9CB43 13D9 8355 295F 4823 7C49  C012 DFA1 686E 68B9 CB43
+P: 1024R/CB4660B9 CC A0 71 81 F4 A0 63 AC  C0 4B 81 1D 8C 15 C8 E5
+D: Parport hacker
+D: Implemented a workaround for some interrupt buggy printers
+D: Author of pscan that helps to fix lp/parport bugs
+D: Author of lil (Linux Interrupt Latency benchmark)
+D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message)
+D: VM hacker
+D: Various other kernel hacks
+S: Imola 40026
+S: Italy
+
+N: Derek Atkins
+E: warlord@MIT.EDU
+D: Linux-AFS Port, random kernel hacker,
+D: VFS fixes (new notify_change in particular)
+D: Moving all VFS access checks into the file systems
+S: MIT Room E15-341
+S: 20 Ames Street
+S: Cambridge, Massachusetts 02139
+S: USA
+
+N: Michel Aubry
+E: giovanni <giovanni@sudfr.com>
+D: Aladdin 1533/1543(C) chipset IDE
+D: VIA MVP-3/TX Pro III chipset IDE
+
+N: Jens Axboe
+E: axboe@suse.de
+D: Linux CD-ROM maintainer, DVD support
+D: elevator + block layer rewrites
+D: highmem I/O support
+D: misc hacking on IDE, SCSI, block drivers, etc
+S: Peter Bangs Vej 258, 2TH
+S: 2500 Valby
+S: Denmark
+
+N: John Aycock
+E: aycock@cpsc.ucalgary.ca
+D: Adaptec 274x driver
+S: Department of Computer Science
+S: University of Calgary
+S: Calgary, Alberta
+S: Canada
+
+N: Miles Bader
+E: miles@gnu.org
+D: v850 port (uClinux)
+S: NEC Corporation
+S: 1753 Shimonumabe, Nakahara-ku
+S: Kawasaki 211-8666
+S: Japan
+
+N: Ralf Baechle
+E: ralf@gnu.org
+P: 1024/AF7B30C1 CF 97 C2 CC 6D AE A7 FE  C8 BA 9C FC 88 DE 32 C3
+D: Linux/MIPS port
+D: Linux/68k hacker
+S: Hauptstrasse 19
+S: 79837 St. Blasien
+S: Germany
+
+N: Krishna Balasubramanian
+E: balasub@cis.ohio-state.edu
+D: Wrote SYS V IPC (part of standard kernel since 0.99.10)
+
+N: Dario Ballabio
+E: ballabio_dario@emc.com
+E: dario.ballabio@tiscalinet.it
+E: dario.ballabio@inwind.it
+D: Author and maintainer of the Ultrastor 14F/34F SCSI driver
+D: Author and maintainer of the EATA ISA/EISA/PCI SCSI driver
+S: EMC Corporation
+S: Milano
+S: Italy
+
+N: Paul Bame
+E: bame@debian.org
+E: bame@puffin.external.hp.com
+E: paul_bame@hp.com
+W: http://www.parisc-linux.org
+D: PA-RISC 32 and 64-bit early boot, firmware interface, interrupts, misc
+S: MS42
+S: Hewlett-Packard
+S: 3404 E Harmony Rd
+S: Fort Collins, CO 80525
+S: USA
+
+N: Arindam Banerji
+E: axb@cse.nd.edu
+D: Contributed ESDI driver routines needed to port LINUX to the PS/2 MCA.
+S: Department of Computer Science & Eng.
+S: University of Notre Dame
+S: Notre Dame, Indiana
+S: USA
+
+N: Greg Banks
+E: gnb@alphalink.com.au
+D: IDT77105 ATM network driver
+D: some SuperH port work
+D: some trivial futzing with kconfig
+
+N: James Banks
+E: james@sovereign.org
+D: TLAN network driver
+D: Logitech Busmouse driver
+
+N: Krzysztof G. Baranowski
+E: kgb@manjak.knm.org.pl
+P: 1024/FA6F16D1 96 D1 1A CF 5F CA 69 EC  F9 4F 36 1F 6D 60 7B DA
+D: Maintainer of the System V file system.
+D: System V fs update for 2.1.x dcache.
+D: Forward ported a couple of SCSI drivers.
+D: Various bugfixes.
+S: ul. Koscielna 12a
+S: 62-300 Wrzesnia
+S: Poland
+
+N: Fred Barnes
+E: frmb2@ukc.ac.uk
+D: Various parport/ppdev hacks and fixes
+S: Computing Lab, The University
+S: Canterbury, KENT
+S: CT2 7NF
+S: England
+
+N: Paul Barton-Davis
+E: pbd@op.net
+D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
+D: Various bugfixes and changes to sound drivers
+S: USA 
+
+N: Carlos Henrique Bauer
+E: chbauer@acm.org
+E: bauer@atlas.unisinos.br
+D: Some new sysctl entries for the parport driver.
+D: New sysctl function for handling unsigned longs
+S: Universidade do Vale do Rio dos Sinos - UNISINOS
+S: DSI/IDASI
+S: Av. Unisinos, 950
+S: 93022000 Sao Leopoldo RS
+S: Brazil
+
+N: Peter Bauer
+E: 100136.3530@compuserve.com
+D: Driver for depca-ethernet-board
+S: 69259 Wilhemsfeld
+S: Rainweg 15
+S: Germany
+
+N: Fred Baumgarten
+E: dc6iq@insl1.etec.uni-karlsruhe.de
+E: dc6iq@adacom.org
+E: dc6iq@db0ais.#hes.deu.eu (packet radio)
+D: NET-2 & netstat(8)
+S: Soevener Strasse 11
+S: 53773 Hennef
+S: Germany
+
+N: Donald Becker
+E: becker@cesdis.gsfc.nasa.gov
+D: General low-level networking hacker
+D: Most of the ethercard drivers
+D: Original author of the NFS server
+S: USRA Center of Excellence in Space Data and Information Sciences
+S: Code 930.5, Goddard Space Flight Center
+S: Greenbelt, Maryland 20771
+S: USA
+
+N: Adam Belay
+E: ambx1@neo.rr.com
+D: Linux Plug and Play Support
+S: USA
+
+N: Daniele Bellucci
+E: bellucda@tiscali.it
+D: Various Janitor work.
+W: http://web.tiscali.it/bellucda
+S: Via Delle Palme, 9
+S: Terni 05100
+S: Italy
+
+N: Krzysztof Benedyczak
+E: golbi@mat.uni.torun.pl
+W: http://www.mat.uni.torun.pl/~golbi
+D: POSIX message queues fs (with M. Wronski)
+S: ul. Podmiejska 52
+S: Radunica
+S: 83-000 Pruszcz Gdanski
+S: Poland
+
+N: Randolph Bentson
+E: bentson@grieg.seaslug.org
+W: http://www.aa.net/~bentson/
+P: 1024/39ED5729 5C A8 7A F4 B2 7A D1 3E  B5 3B 81 CF 47 30 11 71
+D: Author of driver for Cyclom-Y and Cyclades-Z async mux
+S: 2322 37th Ave SW
+S: Seattle, Washington 98126-2010
+S: USA
+
+N: Muli Ben-Yehuda
+E: mulix@mulix.org
+E: muli@il.ibm.com
+W: http://www.mulix.org
+D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU,
+D: KVM and Xen bits and other misc. hackery.
+S: Haifa, Israel
+
+N: Johannes Berg
+E: johannes@sipsolutions.net
+W: http://johannes.sipsolutions.net/
+P: 4096R/7BF9099A C0EB C440 F6DA 091C 884D  8532 E0F3 73F3 7BF9 099A
+D: powerpc & 802.11 hacker
+
+N: Stephen R. van den Berg (AKA BuGless)
+E: berg@pool.informatik.rwth-aachen.de
+D: General kernel, gcc, and libc hacker
+D: Specialisation: tweaking, ensuring portability, tweaking, cleaning,
+D: tweaking and occasionally debugging :-)
+S: Bouwensstraat 22
+S: 6369 BG Simpelveld
+S: The Netherlands
+
+N: Peter Berger
+E: pberger@brimson.com
+W: http://www.brimson.com
+D: Author/maintainer of Digi AccelePort USB driver
+S: 1549 Hiironen Rd.
+S: Brimson, MN  55602
+S: USA
+
+N: Hennus Bergman
+P: 1024/77D50909 76 99 FD 31 91 E1 96 1C  90 BB 22 80 62 F6 BD 63
+D: Author and maintainer of the QIC-02 tape driver
+S: The Netherlands
+
+N: Tomas Berndtsson
+E: tomas@nocrew.org
+W: http://tomas.nocrew.org/
+D: dsp56k device driver
+
+N: Ross Biro
+E: ross.biro@gmail.com
+D: Original author of the Linux networking code
+
+N: Anton Blanchard
+E: anton@samba.org
+W: http://samba.org/~anton/
+P: 1024/8462A731 4C 55 86 34 44 59 A7 99  2B 97 88 4A 88 9A 0D 97
+D: sun4 port, Sparc hacker
+
+N: Hugh Blemings
+E: hugh@blemings.org
+W: http://blemings.org/hugh
+D: Original author of the Keyspan USB to serial drivers, random PowerPC hacker
+S: PO Box 234
+S: Belconnen ACT 2616
+S: Australia
+
+N: Philip Blundell
+E: philb@gnu.org
+D: Linux/ARM hacker
+D: Device driver hacker (eexpress, 3c505, c-qcam, ...)
+D: m68k port to HP9000/300
+D: AUN network protocols
+D: Co-architect of the parallel port sharing system
+D: IPv6 netfilter
+S: FutureTV Labs Ltd
+S: Brunswick House, 61-69 Newmarket Rd, Cambridge CB5 8EG
+S: United Kingdom
+
+N: Thomas Bogendörfer
+E: tsbogend@alpha.franken.de
+D: PCnet32 driver, SONIC driver, JAZZ_ESP driver
+D: newport abscon driver, g364 framebuffer driver
+D: strace for Linux/Alpha
+D: Linux/MIPS hacker
+S: Schafhofstr. 40
+S: 90556 Cadolzburg
+S: Germany
+
+N: Bill Bogstad
+E: bogstad@pobox.com
+D: wrote /proc/self hack, minor samba & dosemu patches
+
+N: Axel Boldt
+E: axel@uni-paderborn.de
+W: http://math-www.uni-paderborn.de/~axel/
+D: Configuration help text support
+D: Linux CD and Support Giveaway List
+
+N: Erik Inge Bolsø
+E: knan@mo.himolde.no
+D: Misc kernel hacks
+D: Updated PC speaker driver for 2.3
+S: Norway
+
+N: Andreas E. Bombe
+E: andreas.bombe@munich.netsurf.de
+W: http://home.pages.de/~andreas.bombe/
+P: 1024/04880A44 72E5 7031 4414 2EB6 F6B4  4CBD 1181 7032 0488 0A44
+D: IEEE 1394 subsystem rewrite and maintainer
+D: Texas Instruments PCILynx IEEE 1394 driver
+
+N: Al Borchers
+E: alborchers@steinerpoint.com
+D: Author/maintainer of Digi AccelePort USB driver
+D: work on usbserial and keyspan_pda drivers
+S: 4912 Zenith Ave. S.
+S: Minneapolis, MN  55410
+S: USA
+
+N: Marc Boucher
+E: marc@mbsi.ca
+P: CA 67 A5 1A 38 CE B6 F2  D5 83 51 03 D2 9C 30 9E  CE D2 DD 65
+D: Netfilter core
+D: IP policy routing by mark
+D: Various fixes (mostly networking)
+S: Montreal, Quebec
+S: Canada
+
+N: Zoltán Böszörményi
+E: zboszor@mail.externet.hu
+D: MTRR emulation with Cyrix style ARR registers, Athlon MTRR support
+
+N: John Boyd
+E: boyd@cis.ohio-state.edu
+D: Co-author of wd7000 SCSI driver
+S: 101 Curl Drive #591
+S: Columbus, Ohio 43210
+S: USA
+
+N: Peter Braam
+E: braam@clusterfs.com
+W: http://www.clusterfs.com/
+D: Coda & InterMezzo filesystems
+S: 181 McNeil
+S: Canmore, AB
+S: Canada, T1W 2R9
+
+N: Ryan Bradetich
+E: rbradetich@uswest.net
+D: Linux/PA-RISC hacker
+S: 1200 Goldenrod Dr.
+S: Nampa, Idaho 83686
+S: USA
+
+N: Dirk J. Brandewie
+E: dirk.j.brandewie@intel.com
+E: linux-wimax@intel.com
+D: Intel Wireless WiMAX Connection 2400 SDIO driver
+
+N: Derrick J. Brashear
+E: shadow@dementia.org
+W: http://www.dementia.org/~shadow
+P: 512/71EC9367 C5 29 0F BC 83 51 B9 F0  BC 05 89 A0 4F 1F 30 05
+D: Author of Sparc CS4231 audio driver, random Sparc work
+S: 403 Gilmore Avenue
+S: Trafford, Pennsylvania 15085
+S: USA
+
+N: Dag Brattli
+E: dagb@cs.uit.no
+W: http://www.cs.uit.no/~dagb
+D: IrDA Subsystem
+S: 19. Wellington Road
+S: Lancaster, LA1 4DN
+S: UK, England
+
+N: Lars Brinkhoff
+E: lars@nocrew.org
+W: http://lars.nocrew.org/
+D: dsp56k device driver
+D: ptrace proxy in user mode kernel port
+S: Kopmansg 2
+S: 411 13  Goteborg
+S: Sweden
+
+N: Paul Bristow
+E: paul@paulbristow.net
+W: http://paulbristow.net/linux/idefloppy.html
+D: Maintainer of IDE/ATAPI floppy driver
+
+N: Dominik Brodowski
+E: linux@brodo.de
+W: http://www.brodo.de/
+P: 1024D/725B37C6  190F 3E77 9C89 3B6D BECD  46EE 67C3 0308 725B 37C6
+D: parts of CPUFreq code, ACPI bugfixes, PCMCIA rewrite, cpufrequtils
+S: Tuebingen, Germany
+
+N: Andries Brouwer
+E: aeb@cwi.nl
+D: random Linux hacker
+S: Bessemerstraat 21
+S: Amsterdam
+S: The Netherlands
+
+N: NeilBrown
+E: neil@brown.name
+P: 4096R/566281B9 1BC6 29EB D390 D870 7B5F  497A 39EC 9EDD 5662 81B9
+D: NFSD Maintainer 2000-2007
+
+N: Zach Brown
+E: zab@zabbo.net
+D: maestro pci sound
+
+N: David Brownell
+D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
+D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
+D: device drivers.  His encouragement also helped many engineers get
+D: started working on the Linux kernel.  David passed away in early
+D: 2011, and will be greatly missed.
+W: https://lkml.org/lkml/2011/4/5/36
+
+N: Gary Brubaker
+E: xavyer@ix.netcom.com
+D: USB Serial Empeg Empeg-car Mark I/II Driver
+
+N: Matthias Bruestle
+E: m@mbsks.franken.de
+D: REINER SCT cyberJack pinpad/e-com USB chipcard reader driver
+S: Germany
+
+N: Adrian Bunk
+P: 1024D/4F12B400  B29C E71E FE19 6755 5C8A  84D4 99FC EA98 4F12 B400
+D: misc kernel hacking and testing
+
+N: Ray Burr
+E: ryb@nightmare.com
+D: Original author of Amiga FFS filesystem
+S: Orlando, Florida
+S: USA
+
+N: Lennert Buytenhek
+E: kernel@wantstofly.org
+D: Original (2.4) rewrite of the ethernet bridging code
+D: Various ARM bits and pieces
+S: Ravenhorst 58
+S: 2317 AK Leiden
+S: The Netherlands
+
+N: Michael Callahan
+E: callahan@maths.ox.ac.uk
+D: PPP for Linux
+S: The Mathematical Institute
+S: 25-29 St Giles
+S: Oxford
+S: United Kingdom
+
+N: Luiz Fernando N. Capitulino
+E: lcapitulino@mandriva.com.br
+E: lcapitulino@gmail.com
+W: http://www.cpu.eti.br
+D: misc kernel hacking
+S: Mandriva
+S: Brazil
+
+N: Remy Card
+E: Remy.Card@masi.ibp.fr
+E: Remy.Card@linux.org
+D: Extended file system [defunct] designer and developer
+D: Second extended file system designer and developer
+S: Institut Blaise Pascal
+S: 4 Place Jussieu
+S: 75252 Paris Cedex 05
+S: France
+
+N: Ulf Carlsson
+D: SGI Indy audio (HAL2) drivers
+E: ulfc@bun.falkenberg.se
+
+N: Ed Carp
+E: ecarp@netcom.com
+D: uucp, elm, pine, pico port
+D: cron, at(1) developer
+S: 48287 Sawleaf
+S: Fremont, California 94539
+S: USA
+
+N: Florent Chabaud
+E: florent.chabaud@polytechnique.org
+D: software suspend
+S: SGDN/DCSSI/SDS/LTI
+S: 58, Bd Latour-Maubourg
+S: 75700 Paris 07 SP
+S: France
+
+N: Gordon Chaffee
+E: chaffee@cs.berkeley.edu
+W: http://bmrc.berkeley.edu/people/chaffee/
+D: vfat, fat32, joliet, native language support
+S: 3700 Warwick Road
+S: Fremont, California 94555
+S: USA
+
+N: Chih-Jen Chang
+E: chihjenc@scf.usc.edu
+E: chihjen@iis.sinica.edu.tw
+D: IGMP(Internet Group Management Protocol) version 2
+S: 3F, 65 Tajen street
+S: Tamsui town, Taipei county,
+S: Taiwan 251
+S: Republic of China
+
+N: Reinette Chatre
+E: reinette.chatre@intel.com
+D: WiMedia Link Protocol implementation
+D: UWB stack bits and pieces
+
+N: Michael Elizabeth Chastain
+E: mec@shout.net
+D: Configure, Menuconfig, xconfig
+
+N: Raymond Chen
+E: raymondc@microsoft.com
+D: Author of Configure script
+S: 14509 NE 39th Street #1096
+S: Bellevue, Washington 98007
+S: USA
+
+N: Christopher L. Cheney
+E: ccheney@debian.org
+E: ccheney@cheney.cx
+W: http://www.cheney.cx
+P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9  1BC5 D106 5AB3 8E38 4AF2
+D: Vista Imaging usb webcam driver
+S: 314 Prince of Wales
+S: Conroe, TX 77304
+S: USA
+
+N: Stuart Cheshire
+E: cheshire@cs.stanford.edu
+D: Author of Starmode Radio IP (STRIP) driver
+D: Originator of design for new combined interrupt handlers
+S: William Gates Department
+S: Stanford University
+S: Stanford, California 94305
+S: USA
+
+N: Randolph Chung
+E: tausq@debian.org
+D: Linux/PA-RISC hacker
+S: Hong Kong
+
+N: Juan Jose Ciarlante
+W: http://juanjox.kernelnotes.org/
+E: jjciarla@raiz.uncu.edu.ar
+E: jjo@mendoza.gov.ar
+D: Network driver alias support
+D: IP masq hashing and app modules
+D: IP masq 2.1 features and bugs
+S: Las Cuevas 2385 - Bo Guemes
+S: Las Heras, Mendoza CP 5539
+S: Argentina
+
+N: Steven P. Cole
+E: scole@lanl.gov
+E: elenstev@mesatop.com
+D: Various build fixes and kernel documentation.
+S: Los Alamos, New Mexico
+S: USA
+
+N: Hamish Coleman
+E: hamish@zot.apana.org.au
+D: SEEQ8005 network driver
+S: 98 Paxton Street
+S: East Malvern, Victoria, 3145
+S: Australia
+
+N: Neil Conway
+E: nconway.list@ukaea.org.uk
+D: Assorted sched/mm titbits
+S: Oxfordshire, UK.
+
+N: Kees Cook
+E: kees@outflux.net
+E: kees@ubuntu.com
+E: keescook@chromium.org
+W: http://outflux.net/blog/
+P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E  6E13 8972 F4DF DC6D C026
+D: Various security things, bug fixes, and documentation.
+S: (ask for current address)
+S: Portland, Oregon
+S: USA
+
+N: Robin Cornelius
+E: robincornelius@users.sourceforge.net
+D: Ralink rt2x00 WLAN driver
+S: Cornwall, U.K.
+
+N: Mark Corner
+E: mcorner@umich.edu
+W: http://www.eecs.umich.edu/~mcorner/
+D: USB Bluetooth Driver
+S: University of Michigan
+S: Ann Arbor, MI
+
+N: Michael Cornwell
+E: cornwell@acm.org
+D: Original designer and co-author of ATA Taskfile
+D: Kernel module SMART utilities
+S: Santa Cruz, California
+S: USA
+
+N: Luis Correia
+E: lfcorreia@users.sf.net
+D: Ralink rt2x00 WLAN driver
+S: Belas, Portugal
+
+N: Alan Cox
+W: http://www.linux.org.uk/diary/
+D: Linux Networking (0.99.10->2.0.29)
+D: Original Appletalk, AX.25, and IPX code
+D: 3c501 hacker
+D: Watchdog timer drivers
+D: Linux/SMP x86 (up to 2.0 only)
+D: Initial Mac68K port
+D: Video4Linux design, bw-qcam and PMS driver ports.
+D: IDE modularisation work
+D: Z85230 driver
+D: Former security contact point (please use vendor-sec@lst.de)
+D: ex 2.2 maintainer
+D: 2.1.x modular sound
+S: c/o Red Hat UK Ltd
+S: Alexandra House
+S: Alexandra Terrace
+S: Guildford, GU1 3DA
+S: United Kingdom
+
+N: Cristian Mihail Craciunescu
+W: http://www.dnt.ro/~cristi/
+E: cristi@dnt.ro
+D: Support for Xircom PGSDB9 (firmware and host driver)
+S: Bucharest
+S: Romania
+
+N: Laurence Culhane
+E: loz@holmes.demon.co.uk
+D: Wrote the initial alpha SLIP code
+S: 81 Hood Street
+S: Northampton
+S: NN1 3QT
+S: United Kingdom
+
+N: Massimo Dal Zotto
+E: dz@debian.org
+D: i8k Dell laptop SMM driver
+
+N: Uwe Dannowski
+E: Uwe.Dannowski@ira.uka.de
+W: http://i30www.ira.uka.de/~dannowsk/
+D: FORE PCA-200E driver
+S: University of Karlsruhe
+S: Germany
+
+N: Ray Dassen
+E: jdassen@wi.LeidenUniv.nl
+W: http://www.wi.leidenuniv.nl/~jdassen/
+P: 1024/672D05C1 DD 60 32 60 F7 90 64 80  E7 6F D4 E4 F8 C9 4A 58
+D: Debian GNU/Linux: www.debian.org maintainer, FAQ co-maintainer,
+D: packages testing, nit-picking & fixing. Enjoying BugFree (TM) kernels.
+S: Zuidsingel 10A
+S: 2312 SB  Leiden
+S: The Netherlands
+
+N: David Davies
+E: davies@wanton.lkg.dec.com
+D: Network driver author - depca, ewrk3 and de4x5
+D: Wrote shared interrupt support
+S: Digital Equipment Corporation
+S: 550 King Street
+S: Littleton, Massachusetts 01460
+S: USA
+
+N: Frank Davis
+E: fdavis@si.rr.com
+E: fdavis112@juno.com
+D: Various kernel patches
+S: 8 Lakeview Terr.
+S: Kerhonkson, NY 12446
+S: USA
+
+N: Wayne Davison
+E: davison@borland.com
+D: Second extended file system co-designer
+
+N: Terry Dawson
+E: terry@perf.no.itg.telecom.com.au
+E: terry@albert.vk2ktj.ampr.org (Amateur Radio use only)
+D: trivial hack to add variable address length routing to Rose.
+D: AX25-HOWTO, HAM-HOWTO, IPX-HOWTO, NET-2-HOWTO
+D: ax25-utils maintainer.
+
+N: Helge Deller
+E: deller@gmx.de
+E: hdeller@redhat.de
+D: PA-RISC Linux hacker, LASI-, ASP-, WAX-, LCD/LED-driver
+S: Schimmelsrain 1
+S: D-69231 Rauenberg
+S: Germany
+
+N: Jean Delvare
+E: khali@linux-fr.org
+W: http://khali.linux-fr.org/
+D: Several hardware monitoring drivers
+S: France
+
+N: Peter Denison
+E: peterd@pnd-pc.demon.co.uk
+W: http://www.pnd-pc.demon.co.uk/promise/
+D: Promise DC4030VL caching HD controller drivers
+
+N: Todd J. Derr
+E: tjd@fore.com
+W: http://www.wordsmith.org/~tjd
+D: Random console hacks and other miscellaneous stuff
+S: 3000 FORE Drive
+S: Warrendale, Pennsylvania 15086
+S: USA
+
+N: Martin Devera
+E: devik@cdi.cz
+W: http://luxik.cdi.cz/~devik/qos/
+D: HTB qdisc and random networking hacks
+
+N: Alex deVries
+E: alex@onefishtwo.ca
+D: Various SGI parts, bits of HAL2 and Newport, PA-RISC Linux.
+S: 41.5 William Street
+S: Ottawa, Ontario
+S: K1N 6Z9
+S: CANADA
+
+N: Jeff Dike
+E: jdike@karaya.com
+W: http://user-mode-linux.sourceforge.net
+D: User mode kernel port
+S: 375 Tubbs Hill Rd
+S: Deering NH 03244
+S: USA
+
+N: Matt Domsch
+E: Matt_Domsch@dell.com
+W: http://www.dell.com/linux
+W: http://domsch.com/linux
+D: Linux/IA-64
+D: Dell PowerEdge server, SCSI layer, misc drivers, and other patches
+S: Dell Inc.
+S: One Dell Way
+S: Round Rock, TX  78682
+S: USA
+
+N: Mattia Dongili
+E: malattia@gmail.com
+D: cpufrequtils (precursor to cpupowerutils)
+
+N: Ben Dooks
+E: ben-linux@fluff.org
+E: ben@simtec.co.uk
+W: http://www.fluff.org/ben/
+W: http://www.simtec.co.uk/
+D: Samsung S3C2410/S3C2440 support, general ARM support
+D: Maintaining Simtec Electronics development boards
+S: Simtec Electronics
+S: Avondale Drive
+S: Tarleton
+S: Preston
+S: Lancs
+S: PR4 6AX
+S: United Kingdom
+
+N: Ivo van Doorn
+E: IvDoorn@gmail.com
+W: http://www.mendiosus.nl
+D: Ralink rt2x00 WLAN driver
+S: Haarlem, The Netherlands
+
+N: John G Dorsey
+E: john+@cs.cmu.edu
+D: ARM Linux ports to Assabet/Neponset, Spot
+S: Department of Electrical and Computer Engineering
+S: Carnegie Mellon University
+S: Pittsburgh, PA  15213
+S: USA
+
+N: Eddie C. Dost
+E: ecd@skynet.be
+D: Linux/Sparc kernel hacker
+D: Linux/Sparc maintainer
+S: Rue de la Chapelle 51
+S: 4850 Moresnet
+S: Belgium
+
+N: Cort Dougan
+E: cort@fsmlabs.com
+W: http://www.fsmlabs.com/linuxppcbk.html
+D: PowerPC
+
+N: Daniel Drake
+E: dsd@gentoo.org
+D: USBAT02 CompactFlash support in usb-storage
+S: UK
+
+N: Oleg Drokin
+E: green@ccssu.crimea.ua
+W: http://www.ccssu.crimea.ua/~green
+D: Cleaning up sound drivers, SA1100 Watchdog.
+S: Skvoznoy per., 14a
+S: Evpatoria
+S: Crimea
+S: UKRAINE, 334320
+
+N: Walt Drummond
+E: drummond@valinux.com
+D: Linux/IA-64
+S: 1382 Bordeaux Drive
+S: Sunnyvale, CA 94087
+S: USA
+
+N: Bruno Ducrot
+E: ducrot@poupinou.org
+D: CPUFreq and ACPI bugfixes.
+S: Mougin, France
+
+N: Don Dugger
+E: n0ano@valinux.com
+D: Linux/IA-64
+S: 1209 Pearl Street, #12
+S: Boulder, CO 80302
+S: USA
+
+N: Thomas Dunbar
+E: tdunbar@vt.edu
+D: TeX & METAFONT hacking/maintenance
+S: Virginia Tech Computing Center
+S: 1700 Pratt Drive
+S: Blacksburg, Virginia 24061
+S: USA
+
+N: Randy Dunlap
+E: rdunlap@infradead.org
+W: http://www.infradead.org/~rdunlap/
+D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
+D: x86 SMP, ACPI, bootflag hacking
+D: documentation, builds
+S: (ask for current address)
+S: USA
+
+N: Bob Dunlop
+E: rjd@xyzzy.clara.co.uk
+E: bob.dunlop@farsite.co.uk
+W: www.farsite.co.uk
+D: FarSync card device driver
+S: FarSite Communications Ltd
+S: Tempus Business Centre
+S: 60 Kingsclere Road
+S: Basingstoke       RG21 6XG
+S: UK
+
+N: Cyrus Durgin
+E: cider@speakeasy.org
+W: http://www.speakeasy.org/~cider/
+D: implemented kmod
+
+N: Torsten Duwe
+E: Torsten.Duwe@informatik.uni-erlangen.de
+D: Part-time kernel hacker
+D: The Linux Support Team Erlangen
+S: Grevenbroicher Str. 17
+S: 47807 Krefeld
+S: Germany
+
+N: Tom Dyas
+E: tdyas@eden.rutgers.edu
+D: minor hacks and some sparc port stuff
+S: New Jersey
+S: USA
+
+N: Drew Eckhardt
+E: drew@PoohSticks.ORG
+D: SCSI code
+D: Assorted snippets elsewhere
+D: Boot sector "..." printing
+S: 2037 Walnut #6
+S: Boulder, Colorado 80302
+S: USA
+
+N: Heiko Eißfeldt
+E: heiko@colossus.escape.de heiko@unifix.de
+D: verify_area stuff, generic SCSI fixes
+D: SCSI Programming HOWTO
+D: POSIX.1 compliance testing
+S: Unifix Software GmbH
+S: Bueltenweg 27a
+S: D-38106 Braunschweig
+S: Germany
+
+N: Bjorn Ekwall
+E: bj0rn@blox.se
+W: http://www.pi.se/blox/
+D: Extended support for loadable modules
+D: D-Link pocket adapter drivers
+S: Brevia 1043
+S: S-114 79 Stockholm
+S: Sweden
+
+N: Pekka Enberg
+E: penberg@cs.helsinki.fi
+W: http://www.cs.helsinki.fi/u/penberg/
+D: Various kernel hacks, fixes, and cleanups.
+D: Slab allocators
+S: Finland
+
+N: David Engebretsen
+E: engebret@us.ibm.com
+D: Linux port to 64-bit PowerPC architecture
+
+N: Michael Engel
+E: engel@unix-ag.org
+D: DECstation framebuffer drivers
+S: Germany
+
+N: Paal-Kristian Engstad
+E: engstad@intermetrics.com
+D: Kernel smbfs (to mount WfW, NT and OS/2 network drives.)
+S: 17101 Springdale Street #225
+S: Huntington Beach, California 92649
+S: USA
+
+N: Stephane Eranian
+E: eranian@hpl.hp.com
+D: Linux/ia64
+S: 1501 Page Mill Rd, MS 1U17
+S: Palo Alto, CA 94304
+S: USA
+
+N: Johannes Erdfelt
+E: johannes@erdfelt.com
+D: Linux/IA-64 bootloader and kernel goop, USB
+S: 6350 Stoneridge Mall Road
+S: Pleasanton, CA 94588
+S: USA
+
+N: Doug Evans
+E: dje@cygnus.com
+D: Wrote Xenix FS (part of standard kernel since 0.99.15)
+
+N: Riccardo Facchetti
+E: fizban@tin.it
+P: 1024/6E657BB5 AF 22 90 33 78 76 04 8B  AF F9 97 1E B5 E2 65 30
+D: Audio Excel DSP 16 init driver author
+D: libmodem author
+D: Yet Another Micro Monitor port and current maintainer
+D: First ELF-HOWTO author
+D: random kernel hacker
+S: Via Paolo VI n.29
+S: 23900 - LECCO (Lc)
+S: Italy
+
+N: Nils Faerber
+E: nils@kernelconcepts.de
+D: i810 TCO watchdog driver author
+D: Mitsumi LU005 tests and fixes
+D: port and fixes of cs46xx sounddriver
+S: Dreisbachstrasse 24
+S: D-57250 Netphen
+S: Germany
+
+N: Rik Faith
+E: faith@acm.org
+D: Future Domain TMC-16x0 SCSI driver (author)
+D: APM driver (early port)
+D: DRM drivers (author of several)
+
+N: János Farkas
+E: chexum@shadow.banki.hu
+D: romfs, various (mostly networking) fixes
+P: 1024/F81FB2E1 41 B7 E4 E6 3E D4 A6 71  6D 9C F3 9F F2 BF DF 6E
+S: Madarász Viktor utca 25
+S: 1131 Budapest
+S: Hungary
+
+N: Ben Fennema
+E: bfennema@falcon.csc.calpoly.edu
+W: http://www.csc.calpoly.edu/~bfennema
+D: UDF filesystem
+S: (ask for current address)
+S: USA
+
+N: Jürgen Fischer
+E: fischer@norbit.de
+D: Author of Adaptec AHA-152x SCSI driver
+S: Schulstraße 18
+S: 26506 Norden
+S: Germany
+
+N: Jeremy Fitzhardinge
+E: jeremy@goop.org
+W: http://www.goop.org/~jeremy
+D: author of userfs filesystem
+D: Improved mmap and munmap handling
+D: General mm minor tidyups
+D: autofs v4 maintainer
+S: 987 Alabama St
+S: San Francisco
+S: CA, 94110
+S: USA
+
+N: Ralf Flaxa
+E: rfflaxa@immd4.informatik.uni-erlangen.de
+D: The Linux Support Team Erlangen
+D: Creator of LST distribution
+D: Author of installation tool LISA
+S: Pfitznerweg 6
+S: 74523 Schwaebisch Hall
+S: Germany
+
+N: Lawrence Foard
+E: entropy@world.std.com
+D: Floppy track reading, fs code
+S: 217 Park Avenue, Suite 108
+S: Worcester, Massachusetts 01609
+S: USA
+
+N: Karl Fogel
+E: kfogel@cs.oberlin.edu
+D: Contributor, Linux User's Guide
+S: 1123 North Oak Park Avenue
+S: Oak Park, Illinois 60302
+S: USA
+
+N: Daniel J. Frasnelli
+E: dfrasnel@alphalinux.org
+W: http://www.alphalinux.org/
+P: 1024/3EF87611 B9 F1 44 50 D3 E8 C2 80  DA E5 55 AA 56 7C 42 DA
+D: DEC Alpha hacker 
+D: Miscellaneous bug squisher
+
+N: Jim Freeman
+E: jfree@sovereign.org
+W: http://www.sovereign.org/
+D: Initial GPL'd Frame Relay driver
+D: Dynamic PPP devices
+D: Sundry modularizations (PPP, IPX, ...) and fixes
+
+N: Bob Frey
+E: bobf@advansys.com
+D: AdvanSys SCSI driver
+S: 1150 Ringwood Court
+S: San Jose, California 95131
+S: USA
+
+N: Adam Fritzler
+E: mid@zigamorph.net
+
+N: Fernando Fuganti
+E: fuganti@conectiva.com.br
+E: fuganti@netbank.com.br
+D: random kernel hacker, ZF MachZ Watchdog driver
+S: Conectiva S.A.
+S: R. Tocantins, 89 - Cristo Rei
+S: 80050-430 - Curitiba - Paraná
+S: Brazil
+
+N: Kumar Gala
+E: galak@kernel.crashing.org
+D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support
+S: Austin, Texas 78729
+S: USA
+
+N: Nigel Gamble
+E: nigel@nrg.org
+D: Interrupt-driven printer driver
+D: Preemptible kernel
+S: 120 Alley Way
+S: Mountain View, California 94040
+S: USA
+
+N: Jeff Garzik
+E: jgarzik@pobox.com
+
+N: Jacques Gelinas
+E: jacques@solucorp.qc.ca
+D: Author of the Umsdos file system
+S: 1326 De Val-Brillant
+S: Laval, Quebec
+S: Canada H7Y 1V9
+
+N: David Gentzel
+E: gentzel@telerama.lm.com
+D: Original BusLogic driver and original UltraStor driver
+S: Whitfield Software Services
+S: 600 North Bell Avenue, Suite 160
+S: Carnegie, Pennsylvania 15106-4304
+S: USA
+
+N: Kai Germaschewski
+E: kai@germaschewski.name
+D: Major kbuild rework during the 2.5 cycle
+D: ISDN Maintainer
+S: USA
+
+N: Philip Gladstone
+E: philip@gladstonefamily.net
+D: Kernel / timekeeping stuff
+S: Carlisle, MA 01741
+S: USA
+  
+N: Jan-Benedict Glaw
+E: jbglaw@lug-owl.de
+D: SRM environment driver (for Alpha systems)
+P: 1024D/8399E1BB 250D 3BCF 7127 0D8C A444  A961 1DBD 5E75 8399 E1BB
+
+N: Thomas Gleixner
+E: tglx@linutronix.de
+D: NAND flash hardware support, JFFS2 on NAND flash
+
+N: Richard E. Gooch
+E: rgooch@atnf.csiro.au
+D: parent process death signal to children
+D: prctl() syscall
+D: /proc/mtrr support to manipulate MTRRs on Intel P6 family
+D: Device FileSystem (devfs)
+S: CSIRO Australia Telescope National Facility
+S: P.O. Box 76, Epping
+S: New South Wales, 2121
+S: Australia
+
+N: Carlos E. Gorges 
+E: carlos@techlinux.com.br
+D: fix smp support on cmpci driver
+P: 2048G/EA3C4B19 FF31 33A6 0362 4915 B7EB  E541 17D0 0379 EA3C 4B19
+S: Brazil
+
+N: Dmitry S. Gorodchanin
+E: pgmdsg@ibi.com
+D: RISCom/8 driver, misc kernel fixes.
+S: 4 Main Street
+S: Woodbridge, Connecticut 06525
+S: USA
+
+N: Paul Gortmaker
+E: p_gortmaker@yahoo.com
+D: Author of RTC driver & several net drivers, Ethernet & BootPrompt Howto.
+D: Made support for modules, ramdisk, generic-serial, etc. optional.
+D: Transformed old user space bdflush into 1st kernel thread - kflushd.
+D: Many other patches, documentation files, mini kernels, utilities, ...
+
+N: Masanori GOTO
+E: gotom@debian.or.jp
+D: Workbit NinjaSCSI-32Bi/UDE driver
+S: Japan
+
+N: John E. Gotts
+E: jgotts@linuxsavvy.com
+D: kernel hacker
+S: 8124 Constitution Apt. 7
+S: Sterling Heights, Michigan 48313
+S: USA
+
+N: Wolfgang Grandegger
+E: wg@grandegger.com
+D: Controller Area Network (device drivers)
+
+N: William Greathouse
+E: wgreathouse@smva.com
+E: wgreathouse@myfavoritei.com
+D: Current Belkin USB Serial Adapter F5U103 hacker
+D: Kernel hacker, embedded systems
+S: 7802 Fitzwater Road   
+S: Brecksville, OH  44141-1334
+S: USA
+
+N: Tristan Greaves
+E: tristan@extricate.org
+W: http://www.extricate.org/
+D: Miscellaneous ipv4 sysctl patches
+
+N: Michael A. Griffith
+E: grif@cs.ucr.edu
+W: http://www.cs.ucr.edu/~grif
+D: Loopback speedup, qlogic SCSI hacking, VT_LOCKSWITCH
+S: Department of Computer Science
+S: University of California, Riverside
+S: Riverside, California 92521-0304
+S: USA
+
+N: Hans Grobler
+E: grobh@sun.ac.za
+D: Various AX.25/ROSE/NETROM + hamradio driver patches
+D: Various X.25/LABP + driver patches
+D: Misc kernel fixes and updates
+S: Department of Electronic Engineering
+S: University of Stellenbosch
+S: Stellenbosch, Western Cape
+S: South Africa
+
+N: Grant Grundler
+E: grundler@parisc-linux.org
+W: http://obmouse.sourceforge.net/
+W: http://www.parisc-linux.org/
+D: obmouse - rewrote Olivier Florent's Omnibook 600 "pop-up" mouse driver
+D: PA-RISC - Interrupt/PCI HBA/IOMMU author and architect
+S: Mountain View, California
+S: USA
+
+N: Grant Guenther
+E: grant@torque.net
+W: http://www.torque.net/linux-pp.html
+D: original author of ppa driver for parallel port ZIP drive
+D: original architect of the parallel-port sharing scheme 
+D: PARIDE subsystem: drivers for parallel port IDE & ATAPI devices
+S: 44 St. Joseph Street, Suite 506
+S: Toronto, Ontario, M4Y 2W4
+S: Canada
+
+N: Richard Günther
+E: rguenth@tat.physik.uni-tuebingen.de
+W: http://www.tat.physik.uni-tuebingen.de/~rguenth
+P: 2048/2E829319 2F 83 FC 93 E9 E4 19 E2  93 7A 32 42 45 37 23 57
+D: binfmt_misc
+S: 72074 Tübingen
+S: Germany
+
+N: Justin Guyett
+E: jguyett@andrew.cmu.edu
+D: via-rhine net driver hacking
+
+N: Danny ter Haar
+E: dth@cistron.nl
+D: /proc/cpuinfo, reboot on panic , kernel pre-patch tester ;)
+S: Cistron
+S: PO-Box 297
+S: 2400 AG, Alphen aan den Rijn
+S: The Netherlands
+
+N: Enver Haase
+E: ehaase@inf.fu-berlin.de
+W: http://www.inf.fu-berlin.de/~ehaase
+D: Driver for the Commodore A2232 serial board
+
+N: Bruno Haible
+E: haible@ma2s2.mathematik.uni-karlsruhe.de
+D: SysV FS, shm swapping, memory management fixes
+S: 17 rue Danton
+S: F - 94270 Le Kremlin-Bicêtre
+S: France
+
+N: Greg Hankins
+E: gregh@cc.gatech.edu
+D: fixed keyboard driver to separate LED and locking status
+S: 25360 Georgia Tech Station
+S: Atlanta, Georgia 30332
+S: USA
+
+N: Brad Hards
+E: bradh@frogmouth.net
+D: Various USB bits, other minor patches
+
+N: Angelo Haritsis
+E: ah@computer.org
+D: kernel patches (serial, watchdog)
+D: xringd, vuzkern, greekXfonts
+S: 77 Clarence Mews
+S: London SE16 1GD
+S: United Kingdom
+
+N: Jan Harkes
+E: jaharkes@cs.cmu.edu
+W: http://www.coda.cs.cmu.edu/
+D: Coda file system
+S: Computer Science Department
+S: Carnegie Mellon University
+S: 5000 Forbes Avenue
+S: Pittsburgh, Pennsylvania 15213
+S: USA
+
+N: Kai Harrekilde-Petersen
+E: kai.harrekilde@get2net.dk
+D: Original author of the ftape-HOWTO, i82078 fdc detection code.
+
+N: Bart Hartgers
+E: bart@etpmod.phys.tue.nl
+D: MTRR emulation with Centaur MCRs
+S: Gen Stedmanstraat 212
+S: 5623 HZ Eindhoven
+S: The Netherlands
+
+N: Oliver Hartkopp
+E: oliver.hartkopp@volkswagen.de
+W: http://www.volkswagen.de
+D: Controller Area Network (network layer core)
+S: Brieffach 1776
+S: 38436 Wolfsburg
+S: Germany
+
+N: Andrew Haylett
+E: ajh@primag.co.uk
+D: Selection mechanism
+
+N: Andre Hedrick
+E: andre@linux-ide.org
+E: andre@linuxdiskcert.org
+W: http://www.linux-ide.org/
+W: http://www.linuxdiskcert.org/
+D: Random SMP kernel hacker...
+D: Uniform Multi-Platform E-IDE driver
+D: Active-ATA-Chipset maddness..........
+D: Ultra DMA 133/100/66/33 w/48-bit Addressing
+D: ATA-Disconnect, ATA-TCQ
+D: ATA-Smart Kernel Daemon
+D: Serial ATA
+D: ATA Command Block and Taskfile
+S: Linux ATA Development (LAD)
+S: Concord, CA
+
+N: Jochen Hein
+E: jochen@jochen.org
+P: 1024/4A27F015 25 72 FB E3 85 9F DE 3B  CB 0A DA DA 40 77 05 6C
+P: 1024D/77D4FC9B F5C5 1C20 1DFC DEC3 3107  54A4 2332 ADFC 77D4 FC9B
+D: National Language Support
+D: Linux Internationalization Project
+D: German Localization for Linux and GNU software
+S: Auf der Fittel 18
+S: 53347 Alfter
+S: Germany
+
+N: Christoph Hellwig
+E: hch@infradead.org
+D: all kinds of driver, filesystem & core kernel hacking
+D: freevxfs driver
+D: sysvfs maintainer
+D: chief codingstyle nitpicker
+S: Ampferstr. 50 / 4
+S: 6020 Innsbruck
+S: Austria
+
+N: Richard Henderson
+E: rth@twiddle.net
+E: rth@cygnus.com
+D: Alpha hacker, kernel and userland
+S: 1668 California St.
+S: Mountain View, California 94041
+S: USA
+
+N: Benjamin Herrenschmidt
+E: benh@kernel.crashing.org
+D: Various parts of PPC/PPC64 & PowerMac
+S: 312/107 Canberra Avenue
+S: Griffith, ACT 2603 
+S: Australia
+
+N: Sebastian Hetze
+E: she@lunetix.de
+D: German Linux Documentation,
+D: Organization of German Linux Conferences
+S: Danckelmannstr. 48
+S: 14059 Berlin
+S: Germany
+
+N: David Hinds
+E: dahinds@users.sourceforge.net
+W: http://tao.stanford.edu/~dhinds
+D: PCMCIA and CardBus stuff, PCMCIA-HOWTO, PCMCIA client drivers
+S: 2019 W. Middlefield Rd #1
+S: Mountain View, CA  94043
+S: USA
+
+N: Michael Hipp
+E: hippm@informatik.uni-tuebingen.de
+D: drivers for the racal ni5210 & ni6510 Ethernet-boards
+S: Talstr. 1
+S: D - 72072 Tuebingen
+S: Germany
+
+N: Richard Hirst
+E: richard@sleepie.demon.co.uk
+E: rhirst@linuxcare.com
+W: http://www.sleepie.demon.co.uk/
+D: linux-m68k VME support
+D: PA-RISC port, scsi and network drivers
+D: 53c700/53c710 driver author, 82596 driver maintainer
+S: United Kingdom
+
+N: Jauder Ho
+E: jauderho@carumba.com
+W: http://www.carumba.com/
+D: bug toaster (A1 sauce makes all the difference)
+D: Random linux hacker
+
+N: Tim Hockin
+E: thockin@hockin.org
+W: http://www.hockin.org/~thockin
+D: Natsemi ethernet
+D: Cobalt Networks (x86) support
+D: This-and-That
+
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
+N: Dirk Hohndel
+E: hohndel@suse.de
+D: The XFree86[tm] Project
+D: USB mouse maintainer
+S: SuSE Rhein/Main AG
+S: Mergenthalerallee 45-47
+S: 65760 Eschborn
+S: Germany
+
+N: Kenji Hollis
+E: kenji@bitgate.com
+W: http://www.bitgate.com/
+D: Berkshire PC Watchdog Driver
+D: Small/Industrial Driver Project
+
+N: Nick Holloway
+E: Nick.Holloway@pyrites.org.uk
+W: http://www.pyrites.org.uk/
+P: 1024/36115A04 F4E1 3384 FCFD C055 15D6  BA4C AB03 FBF8 3611 5A04
+D: Occasional Linux hacker...
+S: (ask for current address)
+S: United Kingdom
+
+N: Ron Holt
+E: ron@holt.org
+E: rholt@netcom.com
+W: http://www.holt.org/
+W: http://www.ronholt.com/
+D: Kernel development
+D: Kernel LDT modifications to support Wabi and Wine
+S: Holtron Internetics, Inc.
+S: 998 East 900 South, Suite 26
+S: Provo, Utah 84606-5607
+S: USA
+
+N: Marcel Holtmann
+E: marcel@holtmann.org
+W: http://www.holtmann.org
+D: Maintainer of the Linux Bluetooth Subsystem
+D: Author and maintainer of the various Bluetooth HCI drivers
+D: Author and maintainer of the CAPI message transport protocol driver
+D: Author and maintainer of the Bluetooth HID protocol driver
+D: Various other Bluetooth related patches, cleanups and fixes
+S: Germany
+
+N: Rob W. W. Hooft
+E: hooft@EMBL-Heidelberg.DE
+D: Shared libs for graphics-tools and for the f2c compiler
+D: Some kernel programming on the floppy and sound drivers in early days
+D: Some other hacks to get different kinds of programs to work for linux
+S: Panoramastrasse 18
+S: D-69126 Heidelberg
+S: Germany
+
+N: Christopher Horn
+E: chorn@warwick.net
+D: Miscellaneous sysctl hacks
+S: 36 Mudtown Road
+S: Wantage, New Jersey 07461
+S: USA
+
+N: Harald Hoyer
+E: harald@redhat.com
+W: http://www.harald-hoyer.de
+D: ip_masq_quake
+D: md boot support
+S: Am Strand 5
+S: D-19063 Schwerin
+S: Germany
+
+N: Jan Hubicka
+E: hubicka@freesoft.cz
+E: hubicka@suse.cz
+W: http://www.paru.cas.cz/~hubicka/
+D: Random kernel tweaks and fixes.
+S: Dukelskych bojovniku 1944
+S: Tabor 390 03
+S: Czech Republic
+
+N: David Huggins-Daines
+E: dhd@debian.org
+E: dhd@eradicator.org
+E: dhd@cepstral.com
+D: PA-RISC port
+D: Nubus subsystem
+D: Generic 68k Macintosh framebuffer driver
+D: STI framebuffer tweaks
+D: LTPC driver tweaks
+S: 110 S. 12th St., Apt. A
+S: Pittsburgh, PA 15203-1250
+S: USA
+
+N: Gareth Hughes
+E: gareth.hughes@acm.org
+D: Pentium III FXSR, SSE support
+D: Author/maintainer of most DRM drivers (especially ATI, MGA)
+D: Core DRM templates, general DRM and 3D-related hacking
+S: No fixed address
+
+N: Kenn Humborg
+E: kenn@wombat.ie
+D: Mods to loop device to support sparse backing files
+S: Ballinagard
+S: Roscommon
+S: Ireland
+
+N: Michael Hunold
+E: michael@mihu.de
+W: http://www.mihu.de/linux/
+D: Generic saa7146 video4linux-2 driver core,
+D: Driver for the "Multimedia eXtension Board", "dpc7146",
+D: "Hexium Orion", "Hexium Gemini"
+
+N: Miguel de Icaza Amozurrutia
+E: miguel@nuclecu.unam.mx
+D: Linux/SPARC team, Midnight Commander maintainer
+S: Avenida Copilco 162, 22-1003
+S: Mexico, DF
+S: Mexico
+
+N: Ian Jackson
+E: iwj10@cus.cam.ac.uk
+E: ijackson@nyx.cs.du.edu
+D: FAQ maintainer and poster of the daily postings
+D: FSSTND group member
+D: Debian core team member and maintainer of several Debian packages
+S: 2 Lexington Close
+S: Cambridge
+S: CB3 0DS
+S: United Kingdom
+
+N: Andreas Jaeger
+E: aj@suse.de
+D: Various smaller kernel fixes
+D: glibc developer
+S: Gottfried-Kinkel-Str. 18
+S: D 67659 Kaiserslautern
+S: Germany
+
+N: Mike Jagdis
+E: jaggy@purplet.demon.co.uk
+E: Mike.Jagdis@purplet.demon.co.uk
+D: iBCS personalities, socket and X interfaces, x.out loader, syscalls...
+D: Purple Distribution maintainer
+D: UK FidoNet support
+D: ISODE && PP
+D: Kernel and device driver hacking
+S: 280 Silverdale Road
+S: Earley
+S: Reading
+S: RG6 2NU
+S: United Kingdom
+
+N: Jakub Jelinek
+E: jakub@redhat.com
+W: http://sunsite.mff.cuni.cz/~jj
+P: 1024/0F7623C5 53 95 71 3C EB 73 99 97  02 49 40 47 F9 19 68 20
+D: Sparc hacker, SILO, mc
+D: Maintain sunsite.mff.cuni.cz
+S: K osmidomkum 723
+S: 160 00 Praha 6
+S: Czech Republic
+
+N: Niels Kristian Bech Jensen
+E: nkbj1970@hotmail.com
+D: Miscellaneous kernel updates and fixes.
+
+N: Michael K. Johnson
+E: johnsonm@redhat.com
+W: http://www.redhat.com/~johnsonm
+P: 1024/4536A8DD 2A EC 88 08 40 64 CE D8  DD F8 12 2B 61 43 83 15
+D: The Linux Documentation Project
+D: Kernel Hackers' Guide
+D: Procps
+D: Proc filesystem
+D: Maintain tsx-11.mit.edu
+D: LP driver
+S: 201 Howell Street, Apartment 1C
+S: Chapel Hill, North Carolina 27514-4818
+S: USA
+
+N: Dave Jones
+E: davej@redhat.com
+W: http://www.codemonkey.org.uk
+D: Assorted VIA x86 support.
+D: 2.5 AGPGART overhaul.
+D: CPUFREQ maintenance.
+D: Fedora kernel maintenance.
+D: Misc/Other.
+S: 314 Littleton Rd, Westford, MA 01886, USA
+
+N: Martin Josfsson
+E: gandalf@wlug.westbo.se
+P: 1024D/F6B6D3B1 7610 7CED 5C34 4AA6 DBA2  8BE1 5A6D AF95 F6B6 D3B1
+D: netfilter: SAME target
+D: netfilter: helper target
+D: netfilter: various other hacks
+S: Ronneby
+S: Sweden
+
+N: Ani Joshi
+E: ajoshi@shell.unixbox.com
+D: fbdev hacking
+
+N: Jesper Juhl
+E: jj@chaosbits.net
+D: Various fixes, cleanups and minor features all over the tree.
+D: Wrote initial version of the hdaps driver (since passed on to others).
+S: Lemnosvej 1, 3.tv
+S: 2300 Copenhagen S.
+S: Denmark
+
+N: Jozsef Kadlecsik
+E: kadlec@blackhole.kfki.hu
+P: 1024D/470DB964 4CB3 1A05 713E 9BF7 FAC5  5809 DD8C B7B1 470D B964
+D: netfilter: TCP window tracking code
+D: netfilter: raw table
+D: netfilter: iprange match
+D: netfilter: new logging interfaces
+D: netfilter: various other hacks
+S: Tata
+S: Hungary
+
+N: Bernhard Kaindl
+E: bkaindl@netway.at
+E: edv@bartelt.via.at
+D: Author of a menu based configuration tool, kmenu, which 
+D: is the predecessor of 'make menuconfig' and 'make xconfig'.
+D: digiboard driver update(modularisation work and 2.1.x upd)
+S: Tallak 95
+S: 8103 Rein
+S: Austria
+
+N: Mitsuru Kanda
+E: mk@linux-ipv6.org
+E: mk@isl.rdc.toshiba.co.jp
+E: mk@karaba.org
+W: http://www.karaba.org/~mk/
+P: 1024D/2EC7E30D 4DC3 949B 5A6C F0D6 375F  4472 8888 A8E1 2EC7 E30D
+D: IPsec, IPv6
+D: USAGI/WIDE Project, TOSHIBA CORPORATION
+S: 2-47-8, Takinogawa,
+S: Kita, Tokyo 114-0023
+S: Japan
+
+N: Jan Kara
+E: jack@atrey.karlin.mff.cuni.cz
+E: jack@suse.cz
+D: Quota fixes for 2.2 kernel
+D: Quota fixes for 2.3 kernel
+D: Few other fixes in filesystem area (buffer cache, isofs, loopback)
+W: http://atrey.karlin.mff.cuni.cz/~jack/
+S: Krosenska' 543
+S: 181 00 Praha 8
+S: Czech Republic
+
+N: Jan "Yenya" Kasprzak
+E: kas@fi.muni.cz
+D: Author of the COSA/SRP sync serial board driver.
+D: Port of the syncppp.c from the 2.0 to the 2.1 kernel.
+P: 1024/D3498839 0D 99 A7 FB 20 66 05 D7  8B 35 FC DE 05 B1 8A 5E
+W: http://www.fi.muni.cz/~kas/
+S: c/o Faculty of Informatics, Masaryk University
+S: Botanicka' 68a
+S: 602 00 Brno
+S: Czech Republic
+
+N: Jakob Kemi
+E: jakob.kemi@telia.com
+D: V4L W9966 Webcam driver
+S: Forsbyvägen 33
+S: 74143 Knivsta
+S: Sweden
+
+N: Fred N. van Kempen
+E: waltje@linux.com
+D: NET-2
+D: Drivers
+D: Kernel cleanups
+S: Korte Heul 95
+S: 1403 ND  BUSSUM
+S: The Netherlands
+
+N: Karl Keyte
+E: karl@koft.com
+D: Disk usage statistics and modifications to line printer driver
+S: 26a Sheen Road
+S: Richmond
+S: Surrey
+S: TW9 1AE
+S: United Kingdom
+
+N: Marko Kiiskila
+E: marko@iprg.nokia.com
+D: Author of ATM Lan Emulation
+S: 660 Harvard Ave. #7
+S: Santa Clara, CA 95051
+S: USA
+
+N: Russell King
+E: rmk@arm.linux.org.uk
+D: Linux/arm integrator, maintainer & hacker
+D: Acornfb, Cyber2000fb author
+S: Burgh Heath, Tadworth, Surrey.
+S: England
+
+N: Olaf Kirch
+E: okir@monad.swb.de
+D: Author of the Linux Network Administrators' Guide
+S: Kattreinstr 38
+S: D-64295
+S: Germany
+
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
+N: Andi Kleen
+E: andi@firstfloor.org
+U: http://www.halobates.de
+D: network, x86, NUMA, various hacks
+S: Schwalbenstr. 96
+S: 85551 Ottobrunn
+S: Germany
+
+N: Ian Kluft
+E: ikluft@thunder.sbay.org
+W: http://www.kluft.com/~ikluft/
+D: NET-1 beta testing & minor patches, original Smail binary packages for
+D: Slackware and Debian, vote-taker for 2nd comp.os.linux reorganization
+S: Post Office Box 611311
+S: San Jose, California 95161-1311
+S: USA
+
+N: Thorsten Knabe
+E: Thorsten Knabe <tek@rbg.informatik.tu-darmstadt.de>
+E: Thorsten Knabe <tek01@hrzpub.tu-darmstadt.de>
+W: http://www.student.informatik.tu-darmstadt.de/~tek
+W: http://www.tu-darmstadt.de/~tek01
+P: 1024/3BC8D885 8C 29 C5 0A C0 D1 D6 F4  20 D4 2D AB 29 F6 D0 60
+D: AD1816 sound driver
+S: Am Bergfried 10
+S: 63225 Langen
+S: Germany
+
+N: Alain L. Knaff
+E: Alain.Knaff@lll.lu
+D: floppy driver
+S: 19, rue Jean l'Aveugle
+S: L-1148 Luxembourg-City
+S: Luxembourg
+
+N: Gerd Knorr
+W: http://bytesex.org
+E: kraxel@bytesex.org
+E: kraxel@suse.de
+D: video4linux, bttv, vesafb, some scsi, misc fixes
+
+N: Harald Koenig
+E: koenig@tat.physik.uni-tuebingen.de
+D: XFree86 (S3), DCF77, some kernel hacks and fixes
+S: Koenigsberger Str. 90
+S: D-72336 Balingen
+S: Germany
+
+N: Rudolf Koenig
+E: rfkoenig@immd4.informatik.uni-erlangen.de
+D: The Linux Support Team Erlangen
+
+N: Andreas Koensgen
+E: ajk@comnets.uni-bremen.de
+D: 6pack driver for AX.25
+
+N: Harald Koerfgen
+E: hkoerfg@web.de
+D: Linux/MIPS kernel hacks and fixes,
+D: DECstation port, Sharp Mobilon port
+S: D-50931 Koeln
+S: Germany
+
+N: Willy Konynenberg
+E: willy@xos.nl
+W: http://www.xos.nl/
+D: IP transparent proxy support
+S: X/OS Experts in Open Systems BV
+S: Kruislaan 419
+S: 1098 VA Amsterdam 
+S: The Netherlands
+
+N: Goran Koruga
+E: korugag@siol.net
+D: cpufrequtils (precursor to cpupowerutils)
+S: Slovenia
+
+N: Jiri Kosina
+E: jikos@jikos.cz
+E: jkosina@suse.cz
+D: Generic HID layer - original code split, fixes
+D: Various ACPI fixes, keeping correct battery state through suspend
+D: various lockdep annotations, autofs and other random bugfixes
+S: Prague, Czech Republic
+
+N: Gene Kozin
+E: 74604.152@compuserve.com
+W: http://www.sangoma.com
+D: WAN Router & Sangoma WAN drivers
+S: Sangoma Technologies Inc.
+S: 7170 Warden Avenue, Unit 2
+S: Markham, Ontario
+S: L3R 8B2
+S: Canada
+
+N: Maxim Krasnyansky
+E: maxk@qualcomm.com
+W: http://vtun.sf.net
+W: http://bluez.sf.net
+D: Author of the Universal TUN/TAP driver
+D: Author of the Linux Bluetooth Subsystem (BlueZ)
+D: Various other kernel patches, cleanups and fixes
+S: 2213 La Terrace Circle
+S: San Jose, CA 95123
+S: USA
+
+N: Andreas S. Krebs
+E: akrebs@altavista.net
+D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards
+
+N: Greg Kroah-Hartman
+E: greg@kroah.com
+E: gregkh@suse.de
+W: http://www.kroah.com/linux/
+D: USB Serial Converter driver framework, USB Handspring Visor driver
+D: ConnectTech WHITEHeat USB driver, Generic USB Serial driver
+D: USB I/O Edgeport driver, USB Serial IrDA driver
+D: USB Bluetooth driver, USB Skeleton driver
+D: bits and pieces of USB core code.
+D: PCI Hotplug core, PCI Hotplug Compaq driver modifications
+D: portions of the Linux Security Module (LSM) framework
+D: parts of the driver core, debugfs.
+
+N: Russell Kroll
+E: rkroll@exploits.org
+W: http://www.exploits.org/
+D: V4L radio cards: radio-aztech (new), others (bugfixes/features)
+D: Loopback block device: dynamic sizing ("max_loop" as module)
+S: Post Office Box 691886
+S: San Antonio, Texas 78269-1886
+S: USA
+
+N: Denis O. Kropp
+E: dok@directfb.org
+D: NeoMagic framebuffer driver
+S: Badensche Str. 46
+S: 10715 Berlin
+S: Germany
+
+N: Andrzej M. Krzysztofowicz
+E: ankry@mif.pg.gda.pl
+D: Some 8-bit XT disk driver and devfs hacking 
+D: Aladdin 1533/1543(C) chipset IDE
+D: PIIX chipset IDE
+S: ul. Matemblewska 1B/10
+S: 80-283 Gdansk
+S: Poland
+
+N: Gero Kuhlmann
+E: gero@gkminix.han.de
+D: mounting root via NFS
+S: Donarweg 4
+S: D-30657 Hannover
+S: Germany
+
+N: Markus Kuhn
+E: mskuhn@cip.informatik.uni-erlangen.de
+W: http://wwwcip.informatik.uni-erlangen.de/user/mskuhn
+D: Unicode, real-time, time, standards
+S: Schlehenweg 9
+S: D-91080 Uttenreuth
+S: Germany
+
+N: Jaya Kumar
+E: jayalk@intworks.biz
+W: http://www.intworks.biz
+D: Arc monochrome LCD framebuffer driver, x86 reboot fixups
+D: pirq addr, CS5535 alsa audio driver
+S: Gurgaon, India
+S: Kuala Lumpur, Malaysia
+
+N: Gabor Kuti
+M: seasons@falcon.sch.bme.hu
+M: seasons@makosteszta.sote.hu
+D: Original author of software suspend
+
+N: Jaroslav Kysela
+E: perex@perex.cz
+W: http://www.perex.cz
+D: Original Author and Maintainer for HP 10/100 Mbit Network Adapters
+D: ISA PnP
+S: Sindlovy Dvory 117
+S: 370 01  Ceske Budejovice
+S: Czech Republic
+
+N: Bas Laarhoven
+E: sjml@xs4all.nl
+D: Loadable modules and ftape driver
+S: J. Obrechtstr 23
+S: NL-5216 GP 's-Hertogenbosch
+S: The Netherlands
+
+N: Savio Lam
+E: lam836@cs.cuhk.hk
+D: Author of the dialog utility, foundation
+D: for Menuconfig's lxdialog.
+
+N: Christoph Lameter
+E: christoph@lameter.com
+D: Digiboard PC/Xe and PC/Xi, Digiboard EPCA
+D: NUMA support, Slab allocators, Page migration
+D: Scalability, Time subsystem
+
+N: Paul Laufer
+E: paul@laufernet.com
+D: Soundblaster driver fixes, ISAPnP quirk
+S: California, USA
+
+N: Jonathan Layes
+D: ARPD support
+
+N: Tom Lees
+E: tom@lpsg.demon.co.uk
+W: http://www.lpsg.demon.co.uk/
+P: 1024/87D4D065 2A 66 86 9D 02 4D A6 1E  B8 A2 17 9D 4F 9B 89 D6
+D: Original author and current maintainer of
+D: PnP code.
+
+N: David van Leeuwen
+E: david@tm.tno.nl
+D: Philips/LMS cm206 cdrom driver, generic cdrom driver
+S: Scheltemalaan 14
+S: 3817 KS Amersfoort
+S: The Netherlands
+
+N: Volker Lendecke
+E: vl@kki.org
+D: Kernel smbfs (to mount WfW, NT and OS/2 network drives.)
+D: NCP filesystem support (to mount NetWare volumes)
+S: Von-Ossietzky-Str. 12
+S: 37085 Göttingen
+S: Germany
+
+N: Kevin Lentin
+E: kevinl@cs.monash.edu.au
+D: NCR53C400/T130B SCSI extension to NCR5380 driver.
+S: 18 Board Street
+S: Doncaster VIC 3108
+S: Australia
+
+N: Hans Lermen
+E: lermen@elserv.ffm.fgan.de
+D: Author of the LOADLIN Linux loader, hacking on boot stuff
+D: Coordinator of DOSEMU releases
+S: Am Muehlenweg 38
+S: D53424 Remagen
+S: Germany
+
+N: Colin Leroy
+E: colin@colino.net
+W: http://www.geekounet.org/
+D: PowerMac adt746x fan driver
+D: Random fixing of various drivers (macintosh, usb, sound)
+S: Toulouse
+S: France
+
+N: Achim Leubner
+E: achim_leubner@adaptec.com
+D: GDT Disk Array Controller/Storage RAID controller driver
+S: ICP vortex GmbH
+S: Neckarsulm
+S: Germany
+
+N: Phil Lewis
+E: beans@bucket.ualr.edu
+D: Promised to send money if I would put his name in the source tree.
+S: Post Office Box 371
+S: North Little Rock, Arkansas 72115
+S: USA
+
+N: Stephan Linz
+E: linz@mazet.de
+E: Stephan.Linz@gmx.de
+W: http://www.crosswinds.net/~tuxer
+D: PCILynx patch to work with 1394a PHY and without local RAM
+S: (ask for current address)
+S: Germany
+
+N: Christophe Lizzi
+E: lizzi@cnam.fr
+W: http://cedric.cnam.fr/personne/lizzi
+D: FORE Systems 200E-series ATM network driver, sparc64 port of ATM
+S: CNAM, Laboratoire CEDRIC
+S: 292, rue St-Martin
+S: 75141 Paris Cedex 03
+S: France
+
+N: Siegfried "Frieder" Loeffler (dg1sek)
+E: floeff@tunix.mathematik.uni-stuttgart.de, fl@LF.net
+W: http://www.mathematik.uni-stuttgart.de/~floeff
+D: Busmaster driver for HP 10/100 Mbit Network Adapters
+S: University of Stuttgart, Germany and
+S: Ecole Nationale Superieure des Telecommunications, Paris
+S: France
+
+N: Jamie Lokier
+E: jamie@shareable.org
+W: http://www.shareable.org/
+D: Reboot-through-BIOS for broken 486 motherboards
+D: Parport fixes, futex improvements
+D: First instruction of x86 sysenter path :)
+S: 51 Sunningwell Road
+S: Oxford
+S: OX1 4SZ
+S: United Kingdom
+
+N: Mark Lord
+E: mlord@pobox.com
+D: EIDE driver, hd.c support
+D: EIDE PCI and bus-master DMA support
+D: Hard Disk Parameter (hdparm) utility
+S: 33 Ridgefield Cr
+S: Nepean, Ontario
+S: Canada K2H 6S3
+
+N: Warner Losh
+E: imp@village.org
+D: Linux/MIPS Deskstation support, Provided OI/OB for Linux
+S: 8786 Niwot Road
+S: Niwot, Colorado 80503
+S: USA
+
+N: Robert M. Love
+E: rml@tech9.net
+E: rml@novell.com
+D: misc. kernel hacking and debugging
+S: Cambridge, MA 02139
+S: USA
+
+N: Martin von Löwis
+E: loewis@informatik.hu-berlin.de
+D: script binary format
+D: NTFS driver
+
+N: H.J. Lu
+E: hjl@gnu.ai.mit.edu
+D: GCC + libraries hacker
+
+N: Yanir Lubetkin
+E: yanirx.lubatkin@intel.com
+E: linux-wimax@intel.com
+D: Intel Wireless WiMAX Connection 2400 driver
+
+N: Michal Ludvig
+E: michal@logix.cz
+E: michal.ludvig@asterisk.co.nz
+W: http://www.logix.cz/michal
+P: 1024D/C45B2218 1162 6471 D391 76E0 9F99  29DA 0C3A 2509 C45B 2218
+D: VIA PadLock driver
+D: Netfilter pkttype module
+S: Asterisk Ltd.
+S: Auckland
+S: New Zealand
+
+N: Tuomas J. Lukka
+E: Tuomas.Lukka@Helsinki.FI
+D: Original dual-monitor patches
+D: Console-mouse-tracking patches
+S: Puistokaari 1 E 18
+S: 00200 Helsinki
+S: Finland
+
+N: Daniel J. Maas
+E: dmaas@dcine.com
+W: http://www.maasdigital.com
+D: dv1394
+
+N: Hamish Macdonald
+E: hamishm@lucent.com
+D: Linux/68k port
+S: 32 Clydesdale Avenue
+S: Kanata, Ontario
+S: Canada K2M-2G7
+
+N: Peter MacDonald
+D: SLS distribution
+D: Initial implementation of VC's, pty's and select()
+
+N: Pavel Machek
+E: pavel@ucw.cz
+D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
+D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
+D: work on suspend-to-ram/disk, killing duplicates from ioctl32
+S: Volkova 1131
+S: 198 00 Praha 9
+S: Czech Republic
+
+N: Paul Mackerras
+E: paulus@samba.org
+D: PPP driver
+D: Linux for PowerPC
+D: Linux port for PCI Power Macintosh
+
+N: Pat Mackinlay
+E: pat@it.com.au
+D: 8 bit XT hard disk driver
+D: Miscellaneous ST0x, TMC-8xx and other SCSI hacking
+S: 25 McMillan Street
+S: Victoria Park 6100
+S: Australia
+
+N: James B. MacLean
+E: macleajb@ednet.ns.ca
+W: http://www.ednet.ns.ca/~macleajb/dosemu.html
+D: Former Coordinator of DOSEMU releases
+D: Program in DOSEMU
+S: PO BOX 220, HFX. CENTRAL
+S: Halifax, Nova Scotia
+S: Canada B3J 3C8
+
+N: Kai Mäkisara
+E: Kai.Makisara@kolumbus.fi
+D: SCSI Tape Driver
+
+N: Asit Mallick
+E: asit.k.mallick@intel.com
+D: Linux/IA-64
+S: 2200 Mission College Blvd
+S: Santa Clara, CA 95052
+S: USA
+
+N: Petko Manolov
+E: petkan@users.sourceforge.net
+D: USB ethernet pegasus/pegasus-II driver
+D: USB ethernet rtl8150 driver
+D: optimizing i[45]86 string routines
+D: i386 task switching hacks
+S: 482 Shadowgraph Dr.
+S: San Jose, CA  95110
+S: USA
+
+N: Martin Mares
+E: mj@ucw.cz
+W: http://www.ucw.cz/~mj/
+D: BIOS video mode handling code
+D: MOXA C-218 serial board driver
+D: Network autoconfiguration
+D: PCI subsystem
+D: Random kernel hacking
+S: Kankovskeho 1241
+S: 182 00 Praha 8
+S: Czech Republic
+
+N: John A. Martin
+E: jam@acm.org
+W: http://www.tux.org/~jam/
+P: 1024/04456D53 9D A3 6C 6B 88 80 8A 61  D7 06 22 4F 95 40 CE D2
+P: 1024/3B986635 5A61 7EE6 9E20 51FB 59FB  2DA5 3E18 DD55 3B98 6635
+D: FSSTND contributor
+D: Credit file compilator
+
+N: Kevin E. Martin
+E: martin@cs.unc.edu
+D: Developed original accelerated X servers included in XFree86
+D: XF86_Mach64
+D: XF86_Mach32
+D: XF86_Mach8
+D: XF86_8514
+D: cfdisk (curses based disk partitioning program)
+
+N: John S. Marvin
+E: jsm@fc.hp.com
+D: PA-RISC port
+S: Hewlett Packard
+S: MS 42
+S: 3404 E. Harmony Road
+S: Fort Collins, CO 80528
+S: USA
+
+N: Torben Mathiasen
+E: torben.mathiasen@compaq.com
+E: torben@kernel.dk
+W: http://tlan.kernel.dk
+D: ThunderLAN maintainer
+D: ThunderLAN updates and other kernel fixes.
+S: Bremensgade 29, st.th
+S: 2300 Copenhagen S
+S: Denmark
+
+N: Claudio S. Matsuoka
+E: cmatsuoka@gmail.com
+E: claudio@mandriva.com
+W: http://helllabs.org/~claudio
+D: V4L, OV511 and HDA-codec hacks
+S: Conectiva S.A.
+S: Souza Naves 1250
+S: 80050-040  Curitiba PR
+S: Brazil
+
+N: Heinz Mauelshagen
+E: mge@EZ-Darmstadt.Telekom.de
+D: Logical Volume Manager
+S: Bartningstr. 12
+S: 64289 Darmstadt
+S: Germany 
+
+N: Mark W. McClelland
+E: mmcclell@bigfoot.com
+E: mark@alpha.dyndns.org
+W: http://alpha.dyndns.org/ov511/
+P: 1024D/357375CC 317C 58AC 1B39 2AB0 AB96  EB38 0B6F 731F 3573 75CC
+D: OV511 driver
+S: (address available on request)
+S: USA
+
+N: Ian McDonald
+E: ian.mcdonald@jandi.co.nz
+E: imcdnzl@gmail.com
+W: http://wand.net.nz/~iam4
+W: http://imcdnzl.blogspot.com
+D: DCCP, CCID3
+S: Hamilton
+S: New Zealand
+
+N: Patrick McHardy
+E: kaber@trash.net
+P: 1024D/12155E80 B128 7DE6 FF0A C2B2 48BE  AB4C C9D4 964E 1215 5E80
+D: netfilter: endless number of bugfixes
+D: netfilter: CLASSIFY target
+D: netfilter: addrtype match
+D: tc: HFSC scheduler
+S: Freiburg
+S: Germany
+
+N: Paul E. McKenney
+E: paulmck@us.ibm.com
+W: http://www.rdrop.com/users/paulmck/
+D: RCU and variants
+D: rcutorture module
+
+N: Mike McLagan
+E: mike.mclagan@linux.org
+W: http://www.invlogic.com/~mmclagan
+D: DLCI/FRAD drivers for Sangoma SDLAs
+S: Innovative Logic Corp
+S: Post Office Box 1068
+S: Laurel, Maryland 20732
+S: USA
+
+N: Bradley McLean
+E: brad@bradpc.gaylord.com
+D: Device driver hacker
+D: General kernel debugger
+S: 249 Nichols Avenue
+S: Syracuse, New York 13206
+S: USA
+
+N: Kyle McMartin
+E: kyle@parisc-linux.org
+D: Linux/PARISC hacker
+D: AD1889 sound driver
+S: Ottawa, Canada
+
+N: Dirk Melchers
+E: dirk@merlin.nbg.sub.org
+D: 8 bit XT hard disk driver for OMTI5520
+S: Schloessleinsgasse 31
+S: D-90453 Nuernberg
+S: Germany
+
+N: Arnaldo Carvalho de Melo
+E: acme@ghostprotocols.net
+E: arnaldo.melo@gmail.com
+E: acme@redhat.com
+W: http://oops.ghostprotocols.net:81/blog/
+P: 1024D/9224DF01 D5DF E3BB E3C8 BCBB F8AD  841A B6AB 4681 9224 DF01
+D: IPX, LLC, DCCP, cyc2x, wl3501_cs, net/ hacks
+S: Brazil
+
+N: Karsten Merker
+E: merker@linuxtag.org
+D: DECstation framebuffer drivers
+S: Germany
+
+N: Michael Meskes
+E: meskes@debian.org
+P: 1024/04B6E8F5 6C 77 33 CA CC D6 22 03  AB AB 15 A3 AE AD 39 7D
+D: Kernel hacker. PostgreSQL hacker. Software watchdog daemon.
+D: Maintainer of several Debian packages
+S: Th.-Heuss-Str. 61 
+S: D-41812 Erkelenz
+S: Germany
+
+N: Nigel Metheringham
+E: Nigel.Metheringham@ThePLAnet.net
+P: 1024/31455639 B7 99 BD B8 00 17 BD 46  C1 15 B8 AB 87 BC 25 FA
+D: IP Masquerading work and minor fixes
+S: Planet Online
+S: The White House, Melbourne Street, LEEDS
+S: LS2 7PS, United Kingdom
+
+N: Craig Metz
+E: cmetz@inner.net
+D: Some of PAS 16 mixer & PCM support, inet6-apps
+
+N: William (Bill) Metzenthen
+E: billm@suburbia.net
+D: Author of the FPU emulator.
+D: Minor kernel hacker for other lost causes (Hercules mono, etc).
+S: 22 Parker Street
+S: Ormond
+S: Victoria 3163
+S: Australia
+
+N: Pauline Middelink
+E: middelin@polyware.nl
+D: General low-level bug fixes, /proc fixes, identd support
+D: Author of IP masquerading
+D: Zoran ZR36120 Video For Linux driver
+S: Boterkorfhoek 34
+S: 7546 JA  Enschede
+S: Netherlands
+
+N: David S. Miller
+E: davem@davemloft.net
+D: Sparc and blue box hacker
+D: Vger Linux mailing list co-maintainer
+D: Linux Emacs elf/qmagic support + other libc/gcc things
+D: Yee bore de yee bore! ;-)
+S: 575 Harrison St. #103
+S: San Francisco, CA 94105
+S: USA
+
+N: Rick Miller
+E: rdmiller@execpc.com
+W: http://www.execpc.com/~rdmiller/
+D: Original Linux Device Registrar (Major/minor numbers)
+D: au-play, bwBASIC
+S: S78 W16203 Woods Road
+S: Muskego, Wisconsin 53150
+S: USA
+
+N: Harald Milz
+E: hm@seneca.linux.de
+D: Linux Projects Map, Linux Commercial-HOWTO
+D: general Linux publicity in Germany, vacation port
+D: UUCP and CNEWS binary packages for LST
+S: Editorial Board iX Mag
+S: Helstorfer Str. 7
+S: D-30625 Hannover
+S: Germany
+
+N: Corey Minyard
+E: minyard@wf-rch.cirr.com
+E: minyard@mvista.com
+W: http://home.attbi.com/~minyard
+D: Sony CDU31A CDROM Driver
+D: IPMI driver
+D: Various networking fixes long ago
+D: Original ppc_md work
+D: Shared zlib
+S: 7406 Wheat Field Rd
+S: Garland, Texas 75044
+S: USA
+
+N: Kazunori Miyazawa
+E: miyazawa@linux-ipv6.org
+E: Kazunori.Miyazawa@jp.yokogawa.com
+E: kazunori@miyazawa.org
+W: http://www.miyazawa.org/~kazunori/
+D: IPsec, IPv6
+D: USAGI/WIDE Project, Yokogawa Electric Corporation
+S: 2-20-4-203, Nakacho,
+S: Musashino, Tokyo 180-0006
+S: Japan
+
+N: Patrick Mochel
+E: mochel@osdl.org
+E: mochelp@infinity.powertie.org
+D: PCI Power Management, ACPI work
+S: 12725 SW Millikan Way, Suite 400
+S: Beaverton, Oregon 97005
+S: USA
+
+N: Eberhard Mönkeberg
+E: emoenke@gwdg.de
+D: CDROM driver "sbpcd" (Matsushita/Panasonic/Soundblaster)
+S: Ruhstrathöhe 2 b.
+S: D-37085 Göttingen
+S: Germany
+
+N: Thomas Molina
+E: tmolina@cablespeed.com
+D: bug fixes, documentation, minor hackery
+
+N: Paul Moore
+E: paul.moore@hp.com
+D: NetLabel author
+S: Hewlett-Packard
+S: 110 Spit Brook Road
+S: Nashua, NH 03062
+
+N: James Morris
+E: jmorris@namei.org
+W: http://namei.org/
+D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec,
+D: Crypto API, general networking, miscellaneous.
+S: PO Box 707
+S: Spit Junction NSW 2088
+S: Australia
+
+N: David Mosberger-Tang
+E: davidm@hpl.hp.com if IA-64 related, else David.Mosberger@acm.org
+D: Linux/Alpha and Linux/ia64
+S: 35706 Runckel Lane
+S: Fremont, California 94536
+S: USA
+
+N: Sam Mosel
+E: sam.mosel@computer.org
+D: Wacom Intuos USB Support
+S: 22 Seaview St
+S: Fullarton 5063
+S: South Australia
+
+N. Wolfgang Muees
+E: wolfgang@iksw-muees.de
+D: Auerswald USB driver
+
+N: Ian A. Murdock
+E: imurdock@gnu.ai.mit.edu
+D: Creator of Debian distribution
+S: 30 White Tail Lane
+S: Lafayette, Indiana 47905
+S: USA
+
+N: Scott Murray
+E: scottm@somanetworks.com
+E: scott@spiteful.org
+D: OPL3-SA2, OPL3-SA3 sound driver
+D: CompactPCI hotplug core
+D: Ziatech ZT5550 and generic CompactPCI hotplug drivers
+S: Toronto, Ontario
+S: Canada
+
+N: Zwane Mwaikambo
+E: zwane@arm.linux.org.uk
+D: Various driver hacking
+D: Lowlevel x86 kernel hacking
+D: General debugging
+S: (ask for current address)
+S: Tanzania
+
+N: Trond Myklebust
+E: trond.myklebust@fys.uio.no
+D: current NFS client hacker.
+S: Dagaliveien 31e
+S: N-0391 Oslo
+S: Norway
+
+N: Johan Myreen
+E: jem@iki.fi
+D: PS/2 mouse driver writer etc.
+S: Dragonvagen 1 A 13
+S: FIN-00330 Helsingfors
+S: Finland
+
+N: Matija Nalis
+E: mnalis@jagor.srce.hr
+E: mnalis@voyager.hr
+D: Maintainer of the Umsdos file system
+S: Listopadska 7
+S: 10000 Zagreb
+S: Croatia
+
+N: Jonathan Naylor
+E: g4klx@g4klx.demon.co.uk
+E: g4klx@amsat.org
+W: http://zone.pspt.fi/~jsn/
+D: AX.25, NET/ROM and ROSE amateur radio protocol suites
+D: CCITT X.25 PLP and LAPB.
+S: 24 Castle View Drive
+S: Cromford
+S: Matlock
+S: Derbyshire DE4 3RL
+S: United Kingdom
+
+N: Ian S. Nelson
+E: nelsonis@earthlink.net
+P: 1024D/00D3D983 3EFD 7B86 B888 D7E2 29B6  9E97 576F 1B97 00D3 D983
+D: Minor mmap and ide hacks
+S: 1370 Atlantis Ave.
+S: Lafayette CO, 80026
+S: USA
+
+N: Russell Nelson
+E: nelson@crynwr.com
+W: http://www.crynwr.com/~nelson
+P: 1024/83942741 FF 68 EE 27 A0 5A AA C3  F5 DC 05 62 BD 5B 20 2F
+D: Author of cs89x0, maintainer of kernel changelog through 1.3.3
+D: Wrote many packet drivers, from which some Ethernet drivers are derived.
+S: 521 Pleasant Valley Road
+S: Potsdam, New York 13676
+S: USA
+
+N: Dave Neuer
+E: dave.neuer@pobox.com
+D: Helped implement support for Compaq's H31xx series iPAQs
+D: Other mostly minor tweaks & bugfixes
+
+N: Michael Neuffer
+E: mike@i-Connect.Net
+E: neuffer@goofy.zdv.uni-mainz.de
+W: http://www.i-Connect.Net/~mike/
+D: Developer and maintainer of the EATA-DMA SCSI driver
+D: Co-developer EATA-PIO SCSI driver
+D: /proc/scsi and assorted other snippets 
+S: Zum Schiersteiner Grund 2
+S: 55127 Mainz
+S: Germany
+
+N: Gustavo Niemeyer
+E: niemeyer@conectiva.com
+W: https://moin.conectiva.com.br/GustavoNiemeyer
+D: wl3501 PCMCIA wireless card initial support for wireless extensions in 2.4
+S: Conectiva S.A.
+S: R. Tocantins 89
+S: 80050-430  Curitiba PR
+S: Brazil
+
+N: David C. Niemi
+E: niemi@tux.org
+W: http://www.tux.org/~niemi/
+D: Assistant maintainer of Mtools, fdutils, and floppy driver
+D: Administrator of Tux.Org Linux Server, http://www.tux.org
+S: 2364 Old Trail Drive
+S: Reston, Virginia 20191
+S: USA
+
+N: Fredrik Noring
+E: noring@nocrew.org
+W: http://www.lysator.liu.se/~noring/
+D: dsp56k device driver
+
+N: Michael O'Reilly
+E: michael@iinet.com.au
+E: oreillym@tartarus.uwa.edu.au
+D: Wrote the original dynamic sized disk cache stuff. I think the only
+D: part that remains is the GFP_KERNEL et al #defines. :)
+S: 192 Nichsolson Road
+S: Subiaco, 6008
+S: Perth, Western Australia
+S: Australia
+
+N: Miguel Ojeda Sandonis
+E: miguel.ojeda.sandonis@gmail.com
+W: http://miguelojeda.es
+W: http://jair.lab.fi.uva.es/~migojed/
+D: Author of the ks0108, cfag12864b and cfag12864bfb auxiliary display drivers.
+D: Maintainer of the auxiliary display drivers tree (drivers/auxdisplay/*)
+S: C/ Mieses 20, 9-B
+S: Valladolid 47009
+S: Spain
+
+N: Gadi Oxman
+E: gadio@netvision.net.il
+D: Original author and maintainer of IDE/ATAPI floppy/tape drivers
+
+N: Greg Page
+E: gpage@sovereign.org
+D: IPX development and support
+
+N: David Parsons
+E: orc@pell.chi.il.us
+D: improved memory detection code.
+
+N: Ivan Passos
+E: ivan@cyclades.com
+D: Author of the Cyclades-PC300 synchronous card driver
+D: Maintainer of the Cyclom-Y/Cyclades-Z asynchronous card driver
+S: Cyclades Corp
+S: 41934 Christy St
+S: Fremont, CA 94538
+S: USA
+
+N: Mikulas Patocka
+E: mikulas@artax.karlin.mff.cuni.cz
+W: http://artax.karlin.mff.cuni.cz/~mikulas/
+P: 1024/BB11D2D5 A0 F1 28 4A C4 14 1E CF  92 58 7A 8F 69 BC A4 D3
+D: Read/write HPFS filesystem
+S: Weissova 8
+S: 644 00 Brno
+S: Czech Republic
+
+N: Vojtech Pavlik
+E: vojtech@suse.cz
+D: Joystick driver
+D: arcnet-hardware readme
+D: Minor ARCnet hacking
+D: USB (HID, ACM, Printer ...)
+S: Ucitelska 1576
+S: Prague 8
+S: 182 00 Czech Republic
+
+N: Rick Payne
+D: RFC2385 Support for TCP
+
+N: Barak A. Pearlmutter
+E: bap@cs.unm.edu
+W: http://www.cs.unm.edu/~bap/
+P: 512/602D785D 9B A1 83 CD EE CB AD 93  20 C6 4C B7 F5 E9 60 D4
+D: Author of mark-and-sweep GC integrated by Alan Cox
+S: Computer Science Department
+S: FEC 313
+S: University of New Mexico
+S: Albuquerque, New Mexico 87131
+S: USA
+
+N: Avery Pennarun
+E: apenwarr@worldvisions.ca
+W: http://www.worldvisions.ca/~apenwarr/
+D: ARCnet driver
+D: "make xconfig" improvements
+D: Various minor hacking
+S: RR #5, 497 Pole Line Road
+S: Thunder Bay, Ontario
+S: CANADA P7C 5M9
+
+N: Inaky Perez-Gonzalez
+E: inaky.perez-gonzalez@intel.com
+E: linux-wimax@intel.com
+E: inakypg@yahoo.com
+D: WiMAX stack
+D: Intel Wireless WiMAX Connection 2400 driver
+
+N: Yuri Per
+E: yuri@pts.mipt.ru
+D: Some smbfs fixes
+S: Demonstratsii 8-382
+S: Tula 300000
+S: Russia
+
+N: Inaky Perez-Gonzalez
+E: inaky.perez-gonzalez@intel.com
+D: UWB stack, HWA-RC driver and HWA-HC drivers
+D: Wireless USB additions to the USB stack
+D: WiMedia Link Protocol bits and pieces
+
+N: Gordon Peters
+E: GordPeters@smarttech.com
+D: Isochronous receive for IEEE 1394 driver (OHCI module).
+D: Bugfixes for the aforementioned.
+S: Calgary, Alberta
+S: Canada
+
+N: Johnnie Peters
+E: jpeters@phx.mcd.mot.com
+D: Motorola PowerPC changes for PReP
+S: 2900 S. Diable Way
+S: Tempe, Arizona 85282
+S: USA
+
+N: Kirk Petersen
+E: kirk@speakeasy.org
+W: http://www.speakeasy.org/~kirk/
+D: implemented kmod
+D: modularized BSD Unix domain sockets
+
+N: Martin Kasper Petersen
+E: mkp@mkp.net
+D: PA-RISC port
+D: XFS file system
+D: kiobuf based block I/O work
+S: 314 Frank St.
+S: Ottawa, Ontario
+S: Canada K2P 0X8
+
+N: Mikael Pettersson
+E: mikpe@it.uu.se
+W: http://user.it.uu.se/~mikpe/linux/
+D: Miscellaneous fixes
+
+N: Reed H. Petty
+E: rhp@draper.net
+W: http://www.draper.net
+D: Loop device driver extensions
+D: Encryption transfer modules (no export)
+S: Post Office Box 1815
+S: Harrison, Arkansas  72602-1815
+S: USA
+
+N: Kai Petzke
+E: petzke@teltarif.de
+W: http://www.teltarif.de/
+P: 1024/B42868C1 D9 59 B9 98 BB 93 05 38  2E 3E 31 79 C3 65 5D E1
+D: Driver for Laser Magnetic Storage CD-ROM
+D: Some kernel bug fixes
+D: Port of the database Postgres
+D: Book: "Linux verstehen und anwenden" (Hanser-Verlag)
+S: Triftstra=DFe 55
+S: 13353 Berlin
+S: Germany
+
+N: Emanuel Pirker
+E: epirker@edu.uni-klu.ac.at
+D: AIC5800 IEEE 1394, RAW I/O on 1394
+D: Starter of Linux1394 effort
+S: ask per mail for current address
+
+N: Nicolas Pitre
+E: nico@fluxnic.net
+D: StrongARM SA1100 support integrator & hacker
+D: Xscale PXA architecture
+D: unified SMC 91C9x/91C11x ethernet driver (smc91x)
+S: Montreal, Quebec, Canada
+
+N: Ken Pizzini
+E: ken@halcyon.com
+D: CDROM driver "sonycd535" (Sony CDU-535/531)
+
+N: Stelian Pop
+E: stelian@popies.net
+P: 1024D/EDBB6147 7B36 0E07 04BC 11DC A7A0  D3F7 7185 9E7A EDBB 6147
+D: random kernel hacks
+S: Paimpont, France
+
+N: Pete Popov
+E: pete_popov@yahoo.com
+D: Linux/MIPS AMD/Alchemy Port and mips hacking and debugging
+S: San Jose, CA 95134
+S: USA
+
+N: Matt Porter
+E: mporter@kernel.crashing.org
+D: Motorola PowerPC PReP support
+D: cPCI PowerPC support
+D: Embedded PowerPC 4xx/6xx/7xx/74xx support
+S: Chandler, Arizona 85249
+S: USA
+
+N: Frederic Potter 
+E: fpotter@cirpack.com
+D: Some PCI kernel support
+
+N: Rui Prior
+E: rprior@inescn.pt
+D: ATM device driver for NICStAR based cards
+
+N: Stefan Probst
+E: sp@caldera.de
+D: The Linux Support Team Erlangen, 1993-97
+S: Caldera (Deutschland) GmbH
+S: Lazarettstrasse 8
+S: 91054 Erlangen
+S: Germany
+
+N: Giuliano Procida
+E: myxie@debian.org,gprocida@madge.com
+D: Madge Ambassador driver (Collage 155 Server ATM adapter)
+D: Madge Horizon driver (Collage 25 and 155 Client ATM adapters)
+P: 1024/93898735 D3 9E F4 F7 6D 8D 2F 3A  38 BA 06 7C 2B 33 43 7D
+S: Madge Networks
+S: Framewood Road
+S: Wexham SL3 6PJ
+S: United Kingdom
+
+N: Daniel Quinlan
+E: quinlan@pathname.com
+W: http://www.pathname.com/~quinlan/
+D: FSSTND coordinator; FHS editor
+D: random Linux documentation, patches, and hacks
+S: 4390 Albany Drive #41A
+S: San Jose, California 95129
+S: USA
+
+N: Juan Quintela
+E: quintela@fi.udc.es
+D: Memory Management hacking
+S: LFCIA
+S: Departamento de Computación
+S: Universidade da Coruña
+S: E-15071
+S: A Coruña
+S: Spain
+
+N: Augusto Cesar Radtke
+E: bishop@sekure.org
+W: http://bishop.sekure.org
+D: {copy,get,put}_user calls updates
+D: Miscellaneous hacks
+S: R. Otto Marquardt, 226 - Garcia
+S: 89020-350 Blumenau - Santa Catarina
+S: Brazil
+
+N: Goutham Rao
+E: goutham.rao@intel.com
+D: Linux/IA-64
+S: 2200 Mission College Blvd
+S: Santa Clara, CA 95052
+S: USA
+
+N: Eric S. Raymond
+E: esr@thyrsus.com
+W: http://www.tuxedo.org/~esr/
+D: terminfo master file maintainer
+D: Editor: Installation HOWTO, Distributions HOWTO, XFree86 HOWTO
+D: Author: fetchmail, Emacs VC mode, Emacs GUD mode
+S: 6 Karen Drive
+S: Malvern, Pennsylvania 19355
+S: USA
+
+N: Stefan Reinauer
+E: stepan@linux.de
+W: http://www.freiburg.linux.de/~stepan/
+D: Modularization of some filesystems
+D: /proc/sound, minor fixes
+S: Schlossbergring 9
+S: 79098 Freiburg
+S: Germany
+
+N: Thomas Renninger
+E: trenn@suse.de
+D: cpupowerutils
+S: SUSE Linux GmbH
+S: Germany
+
+N: Joerg Reuter
+E: jreuter@yaina.de
+W: http://yaina.de/jreuter/
+W: http://www.qsl.net/dl1bke/
+D: Generic Z8530 driver, AX.25 DAMA slave implementation
+D: Several AX.25 hacks
+
+N: Francois-Rene Rideau
+E: fare@tunes.org
+W: http://www.tunes.org/~fare
+D: petty kernel janitor (byteorder, ufs)
+S: 6, rue Augustin Thierry
+S: 75019 Paris
+S: France
+
+N: Rik van Riel
+E: riel@redhat.com
+W: http://www.surriel.com/
+D: Linux-MM site, Documentation/sysctl/*, swap/mm readaround
+D: kswapd fixes, random kernel hacker, rmap VM,
+D: nl.linux.org administrator, minor scheduler additions
+S: Red Hat Boston
+S: 3 Lan Drive
+S: Westford, MA 01886
+S: USA
+
+N: Pekka Riikonen
+E: priikone@poseidon.pspt.fi
+E: priikone@ssh.com
+D: Random kernel hacking and bug fixes
+D: International kernel patch project
+S: Kasarmikatu 11 A4
+S: 70110 Kuopio
+S: Finland
+
+N: Tobias Ringström
+E: tori@unhappy.mine.nu
+D: Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver
+
+N: Luca Risolia
+E: luca.risolia@studio.unibo.it
+P: 1024D/FCE635A4 88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4
+D: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chips
+D: V4L2 driver for SN9C10x PC Camera Controllers
+D: V4L2 driver for ET61X151 and ET61X251 PC Camera Controllers
+D: V4L2 driver for ZC0301 Image Processor and Control Chip
+S: Via Liberta' 41/A
+S: Osio Sotto, 24046, Bergamo
+S: Italy
+
+N: William E. Roadcap
+E: roadcapw@cfw.com
+W: http://www.cfw.com/~roadcapw
+D: Author of menu based configuration tool, Menuconfig.
+S: 1407 Broad Street
+S: Waynesboro, Virginia 22980
+S: USA
+
+N: Andrew J. Robinson
+E: arobinso@nyx.net
+W: http://www.nyx.net/~arobinso
+D: Hayes ESP serial port driver
+
+N: Florian La Roche
+E: rzsfl@rz.uni-sb.de
+E: flla@stud.uni-sb.de
+D: Net programs and kernel net hacker
+S: Gaildorfer Str. 27
+S: 7000 Stuttgart 50
+S: Germany
+
+N: Christoph Rohland
+E: hans-christoph.rohland@sap.com
+E: ch.rohland@gmx.net
+D: shm fs, SYSV semaphores, af_unix
+S: Neue Heimat Str. 8
+S: D-68789 St.Leon-Rot
+S: Germany
+
+N: Thiago Berlitz Rondon
+E: maluco@mileniumnet.com.br
+W: http://vivaldi.linuxms.com.br/~maluco
+D: Miscellaneous kernel hacker
+S: R. Anhanguera, 1487 - Ipiranga
+S: 79080-740 - Campo Grande - Mato Grosso do Sul
+S: Brazil
+
+N: Stephen Rothwell
+E: sfr@canb.auug.org.au
+W: http://www.canb.auug.org.au/~sfr
+P: 1024/BD8C7805 CD A4 9D 01 10 6E 7E 3B  91 88 FA D9 C8 40 AA 02
+D: Boot/setup/build work for setup > 2K
+D: Author, APM driver
+D: Directory notification
+S: 66 Maltby Circuit
+S: Wanniassa ACT 2903
+S: Australia
+
+N: Gerard Roudier
+E: groudier@free.fr
+D: Contributed to asynchronous read-ahead improvement
+S: 21 Rue Carnot
+S: 95170 Deuil La Barre
+S: France
+
+N: Sebastien Rougeaux
+E: Sebastien.Rougeaux@syseng.anu.edu.au
+D: IEEE 1394 OHCI module
+S: Research School of Information Science and Engineering
+S: The Australian National University, ACT 0200
+S: Australia
+
+N: Aristeu Sergio Rozanski Filho
+E: aris@cathedrallabs.org
+D: Support for EtherExpress 10 ISA (i82595) in eepro driver
+D: User level driver support for input
+S: R. Jose Serrato, 130 - Santa Candida
+S: 82640-320 - Curitiba - Paraná
+S: Brazil
+
+N: Alessandro Rubini
+E: rubini@ipvvis.unipv.it
+D: the gpm mouse server and kernel support for it
+
+N: Philipp Rumpf
+E: prumpf@tux.org
+D: random bugfixes
+S: Drausnickstrasse 29
+S: 91052 Erlangen
+S: Germany
+
+N: Paul `Rusty' Russell
+E: rusty@rustcorp.com.au
+W: http://ozlabs.org/~rusty
+D: Ruggedly handsome.
+D: netfilter, ipchains with Michael Neuling.
+S: 52 Moore St
+S: Turner ACT 2612
+S: Australia
+
+N: Richard Russon (FlatCap)
+E: kernel@flatcap.org
+W: http://www.flatcap.org
+D: NTFS support
+D: LDM support (Win2000/XP Logical Disk Manager/Dynamic Disks)
+S: 50 Swansea Road
+S: Reading
+S: United Kingdom
+
+N: Bill Ryder
+E: bryder@sgi.com
+D: FTDI_SIO usb/serial converter driver
+W: http://reality.sgi.com/bryder_wellington/ftdi_sio
+S: I/3 Walter St
+S: Wellington
+S: New Zealand
+
+N: Sampo Saaristo
+E: sambo@cs.tut.fi
+D: Co-author of Multi-Protocol Over ATM (MPOA)
+S: Tampere University of Technology / Telecom lab
+S: Hermiankatu 12C
+S: FIN-33720 Tampere
+S: Finland
+
+N: Thomas Sailer
+E: t.sailer@alumni.ethz.ch
+E: HB9JNX@HB9W.CHE.EU (packet radio)
+D: Baycom driver
+S: Markusstrasse 18
+S: 8006 Zuerich
+S: Switzerland
+
+N: Manuel Estrada Sainz
+D: Firmware loader (request_firmware)
+
+N: Wayne Salamon
+E: wsalamon@tislabs.com
+E: wsalamon@nai.com
+D: portions of the Linux Security Module (LSM) framework and security modules
+
+N: Robert Sanders
+E: gt8134b@prism.gatech.edu
+D: Dosemu
+
+N: Duncan Sands
+E: duncan.sands@free.fr
+W: http://topo.math.u-psud.fr/~sands
+D: Alcatel SpeedTouch USB driver
+S: 69 rue Dunois
+S: 75013 Paris
+S: France
+
+N: Dipankar Sarma
+E: dipankar@in.ibm.com
+D: RCU
+
+N: Hannu Savolainen
+E: hannu@opensound.com
+D: Maintainer of the sound drivers until 2.1.x days.
+D: Original compressed boot image support.
+S: Valurink. 4A11
+S: 03600 Karkkila
+S: Finland
+
+N: Deepak Saxena
+E: dsaxena@plexity.net
+D: I2O kernel layer (config, block, core, pci, net). I2O disk support for LILO
+D: XScale(IOP, IXP) porting and other random ARM bits
+S: Portland, OR
+
+N: Eric Schenk
+E: Eric.Schenk@dna.lth.se
+D: Random kernel debugging.
+D: SYSV Semaphore code rewrite.
+D: Network layer debugging.
+D: Dial on demand facility (diald).
+S: Dag Hammerskjolds v. 3E
+S: S-226 64 LUND
+S: Sweden
+
+N: Henning P. Schmiedehausen
+E: hps@tanstaafl.de
+D: added PCI support to the serial driver
+S: Buckenhof, Germany
+
+N: Michael Schmitz
+E:
+D: Macintosh IDE Driver
+
+N: Peter De Schrijver
+E: stud11@cc4.kuleuven.ac.be
+D: Mitsumi CD-ROM driver patches March version
+S: Molenbaan 29
+S: B2240 Zandhoven
+S: Belgium
+
+N: Martin Schulze
+E: joey@linux.de
+W: http://home.pages.de/~joey/
+D: Random Linux Hacker, Linux Promoter
+D: CD-List, Books-List, Ex-FAQ
+D: Linux-Support, -Mailbox, -Stammtisch
+D: several improvements to system programs
+S: Oldenburg
+S: Germany
+
+N: Robert Schwebel
+E: robert@schwebel.de
+W: http://www.schwebel.de
+D: Embedded hacker and book author,
+D: AMD Elan support for Linux
+S: Pengutronix
+S: Braunschweiger Strasse 79
+S: 31134 Hildesheim
+S: Germany
+
+N: Darren Senn
+E: sinster@darkwater.com
+D: Whatever I notice needs doing (so far: itimers, /proc)
+S: Post Office Box 64132
+S: Sunnyvale, California 94088-4132
+S: USA
+
+N: Stas Sergeev
+E: stsp@users.sourceforge.net
+D: PCM PC-Speaker driver
+D: misc fixes
+S: Russia
+
+N: Simon Shapiro
+E: shimon@i-Connect.Net
+W: http://www.-i-Connect.Net/~shimon
+D: SCSI debugging
+D: Maintainer of the Debian Kernel packages
+S: 14355 SW Allen Blvd., Suite #140
+S: Beaverton, Oregon 97008
+S: USA
+
+N: Mike Shaver
+E: shaver@hungry.org
+W: http://www.hungry.org/~shaver/
+D: MIPS work, /proc/sys/net, misc net hacking
+S: 149 Union St.
+S: Kingston, Ontario
+S: Canada K7L 2P4
+
+N: John Shifflett
+E: john@geolog.com
+E: jshiffle@netcom.com
+D: Always IN2000 SCSI driver
+D: wd33c93 SCSI driver (linux-m68k)
+S: San Jose, California
+S: USA
+
+N: Robert Siemer
+E: Robert.Siemer@gmx.de
+P: 2048/C99A4289 2F DC 17 2E 56 62 01 C8  3D F2 AC 09 F2 E5 DD EE
+D: miroSOUND PCM20 radio RDS driver, ACI rewrite
+S: Klosterweg 28 / i309
+S: 76131 Karlsruhe
+S: Germany
+
+N: James Simmons 
+E: jsimmons@infradead.org
+E: jsimmons@users.sf.net 
+D: Frame buffer device maintainer
+D: input layer development
+D: tty/console layer
+D: various mipsel devices 
+S: 115 Carmel Avenue 
+S: El Cerrito CA 94530
+S: USA 
+
+N: Jaspreet Singh
+E: jaspreet@sangoma.com
+W: www.sangoma.com
+D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards 
+S: Sangoma Technologies Inc.,
+S: 1001 Denison Street
+S: Suite 101
+S: Markham, Ontario L3R 2Z6
+S: Canada
+
+N: Rick Sladkey
+E: jrs@world.std.com
+D: utility hacker: Emacs, NFS server, mount, kmem-ps, UPS debugger, strace, GDB
+D: library hacker: RPC, profil(3), realpath(3), regexp.h
+D: kernel hacker: unnamed block devs, NFS client, fast select, precision timer
+S: 24 Avon Place
+S: Arlington, Massachusetts 02174
+S: USA
+
+N: Craig Small
+E: csmall@triode.apana.org.au
+E: vk2xlz@gonzo.vk2xlz.ampr.org (packet radio)
+D: Gracilis PackeTwin device driver
+D: RSPF daemon 
+S: 10 Stockalls Place
+S: Minto, NSW, 2566
+S: Australia
+
+N: Stephen Smalley
+E: sds@tycho.nsa.gov
+D: portions of the Linux Security Module (LSM) framework and security modules
+
+N: Chris Smith
+E: csmith@convex.com
+D: Read only HPFS filesystem
+S: Richardson, Texas
+S: USA
+
+N: Christopher Smith
+E: x@xman.org
+D: Tulip net driver hacker
+
+N: Mark Smith
+E: mark.smith@comdev.cc
+D: Multicast support in bonding driver
+
+N: Miquel van Smoorenburg
+E: miquels@cistron.nl
+D: Kernel and net hacker. Sysvinit, minicom. doing Debian stuff.
+S: Cistron Internet Services
+S: PO-Box 297
+S: 2400 AG, Alphen aan den Rijn
+S: The Netherlands
+
+N: Scott Snyder
+E: snyder@fnald0.fnal.gov
+D: ATAPI cdrom driver
+S: MS 352, Fermilab
+S: Post Office Box 500
+S: Batavia, Illinois 60510
+S: USA
+
+N: Leo Spiekman
+E: leo@netlabs.net
+W: http://www.netlabs.net/hp/leo/
+D: Optics Storage 8000AT cdrom driver
+S: Cliffwood, New Jersey 07721
+S: USA
+
+N: Manfred Spraul
+E: manfred@colorfullife.com
+W: http://www.colorfullife.com/~manfred
+D: Lots of tiny hacks. Larger improvements to SysV IPC msg,
+D: slab, pipe, select.
+S: 71701 Schwieberdingen
+S: Germany
+
+N: Andrew Stanley-Jones
+E: asj@lanmedia.com
+D: LanMedia Corp. Device WAN card device driver
+S: #102, 686 W. Maude Ave
+S: Sunyvale, CA 94086
+S: USA
+
+N: Michael Still
+E: mikal@stillhq.com
+W: http://www.stillhq.com
+D: Various janitorial patches
+D: mandocs and mandocs_install build targets
+S: (Email me and ask)
+S: Australia
+
+N: Henrik Storner
+E: storner@image.dk
+W: http://www.image.dk/~storner/
+W: http://www.sslug.dk/
+D: Configure script: Invented tristate for module-configuration
+D: vfat/msdos integration, kerneld docs, Linux promotion
+D: Miscellaneous bug-fixes
+S: Chr. Winthersvej 1 B, st.th.
+S: DK-1860 Frederiksberg C
+S: Denmark
+
+N: Drew Sullivan
+E: drew@ss.org
+W: http://www.ss.org/
+P: 1024/ACFFA969 5A 9C 42 AB E4 24 82 31  99 56 00 BF D3 2B 25 46
+D: iBCS2 developer
+S: 22 Irvington Cres.
+S: Willowdale, Ontario
+S: Canada M2N 2Z1
+
+N: Adam Sulmicki
+E: adam@cfar.umd.edu
+W: http://www.eax.com
+D: core networking fixes
+D: patch-kernel enhancements
+D: misc kernel fixes and updates
+
+N: Adrian Sun
+E: asun@cobaltnet.com
+D: hfs support
+D: alpha rtc port, random appletalk fixes
+S: Department of Zoology, University of Washington
+S: Seattle, WA  98195-1800
+S: USA
+
+N: Eugene Surovegin
+E: ebs@ebshome.net
+W: http://kernel.ebshome.net/
+P: 1024D/AE5467F1 FF22 39F1 6728 89F6 6E6C  2365 7602 F33D AE54 67F1
+D: Embedded PowerPC 4xx: EMAC, I2C, PIC and random hacks/fixes
+S: Sunnyvale, California 94085
+S: USA
+
+N: Corey Thomas
+E: corey@world.std.com
+W: http://world.std.com/~corey/index.html
+D: Raylink/WebGear wireless LAN device driver (ray_cs) author
+S: 145 Howard St.
+S: Northborough, MA 01532
+S: USA
+
+N: Tommy Thorn
+E: Tommy.Thorn@irisa.fr
+W: http://www.irisa.fr/prive/thorn/index.html
+P: 512/B4AFC909 BC BF 6D B1 52 26 1E D6  E3 2F A3 24 2A 84 FE 21
+D: Device driver hacker (aha1542 & plip)
+S: IRISA
+S: Universit=E9 de Rennes I
+S: F-35042 Rennes Cedex
+S: France
+
+N: Urs Thuermann
+E: urs.thuermann@volkswagen.de
+W: http://www.volkswagen.de
+D: Controller Area Network (network layer core)
+S: Brieffach 1776
+S: 38436 Wolfsburg
+S: Germany
+
+N: Jon Tombs
+E: jon@gte.esi.us.es
+W: http://www.esi.us.es/~jon
+D: NFS mmap()
+D: XF86_S3
+D: Kernel modules
+D: Parts of various other programs (xfig, open, ...)
+S: C/ Federico Garcia Lorca 1 10-A
+S: Sevilla 41005
+S: Spain
+
+N: Linus Torvalds
+E: torvalds@linux-foundation.org
+D: Original kernel hacker
+S: Portland, Oregon 97005
+S: USA
+
+N: Marcelo Tosatti
+E: marcelo@kvack.org
+D: v2.4 kernel maintainer
+S: Brazil
+
+N: Stefan Traby
+E: stefan@quant-x.com
+D: Minor Alpha kernel hacks
+S: Mitterlasznitzstr. 13
+S: 8302 Nestelbach
+S: Austria
+
+N: Jeff Tranter
+E: tranter@pobox.com
+D: Enhancements to Joystick driver
+D: Author of Sound HOWTO and CD-ROM HOWTO
+D: Author of several small utilities
+D: (bogomips, scope, eject, statserial)
+S: 1 Laurie Court
+S: Kanata, Ontario
+S: Canada K2L 1S2
+
+N: Andrew Tridgell
+E: tridge@samba.org
+W: http://samba.org/tridge/
+D: dosemu, networking, samba
+S: 3 Ballow Crescent
+S: MacGregor A.C.T 2615
+S: Australia
+
+N: Josh Triplett
+E: josh@freedesktop.org
+P: 1024D/D0FE7AFB B24A 65C9 1D71 2AC2 DE87  CA26 189B 9946 D0FE 7AFB
+D: rcutorture maintainer
+D: lock annotations, finding and fixing lock bugs
+
+N: Winfried Trümper
+E: winni@xpilot.org
+W: http://www.shop.de/~winni/
+D: German HOWTO, Crash-Kurs Linux (German, 100 comprehensive pages)
+D: CD-Writing HOWTO, various mini-HOWTOs
+D: One-week tutorials on Linux twice a year (free of charge)
+D: Linux-Workshop Köln (aka LUG Cologne, Germany), Installfests
+S: Tacitusstr. 6
+S: D-50968 Köln
+
+N: Tsu-Sheng Tsao
+E: tsusheng@scf.usc.edu
+D: IGMP(Internet Group Management Protocol) version 2
+S: 2F 14 ALY 31 LN 166 SEC 1 SHIH-PEI RD
+S: Taipei 
+S: Taiwan 112
+S: Republic of China
+S: 24335 Delta Drive
+S: Diamond Bar, California 91765
+S: USA
+
+N: Theodore Ts'o
+E: tytso@mit.edu
+D: Random Linux hacker
+D: Maintainer of tsx-11.mit.edu ftp archive
+D: Maintainer of c.o.l.* Usenet<->mail gateway
+D: Author of serial driver
+D: Author of the new e2fsck
+D: Author of job control and system call restart code
+D: Author of ramdisk device driver
+D: Author of loopback device driver
+D: Author of /dev/random driver
+S: MIT Room E40-343
+S: 1 Amherst Street
+S: Cambridge, Massachusetts 02139
+S: USA
+
+N: Simmule Turner
+E: sturner@tele-tv.com
+D: Added swapping to filesystem
+S: 4226 Landgreen Street
+S: Rockville, Maryland 20853
+S: USA
+
+N: Stephen Tweedie
+E: sct@redhat.com
+P: 1024/E7A417AD E2 FE A4 20 34 EC ED FC 7D 7E 67 8D E0 31 D1 69
+P: 1024D/43BE7544 D2A4 8556 08E6 90E7 076C  BA3F 243F 20A4 43BE 7544
+D: Second extended file system developer
+D: General filesystem hacker
+D: kswap vm management code
+S: 44 Campbell Park Crescent
+S: Edinburgh EH13 0HT
+S: United Kingdom
+
+N: Thomas Uhl
+E: uhl@sun1.rz.fh-heilbronn.de
+D: Application programmer
+D: Linux promoter
+D: Author of a German book on Linux
+S: Obere Heerbergstrasse 17
+S: 97078 Wuerzburg
+S: Germany
+
+N: Greg Ungerer
+E: gerg@snapgear.com
+D: uClinux kernel hacker
+D: Port uClinux to the Motorola ColdFire CPU
+D: Author of Stallion multiport serial drivers
+S: SnapGear Inc.
+S: 825 Stanley St
+S: Woolloongabba. QLD. 4102
+S: Australia
+
+N: Jeffrey A. Uphoff
+E: juphoff@transmeta.com
+E: jeff.uphoff@linux.org
+P: 1024/9ED505C5 D7 BB CA AA 10 45 40 1B  16 19 0A C0 38 A0 3E CB
+D: Linux Security/Alert mailing lists' moderator/maintainer.
+D: NSM (rpc.statd) developer.
+D: PAM S/Key module developer.
+D: 'dip' contributor.
+D: AIPS port, astronomical community support.
+S: Transmeta Corporation
+S: 2540 Mission College Blvd.
+S: Santa Clara, CA 95054
+S: USA
+
+N: Matthias Urlichs
+E: smurf@smurf.noris.de
+E: smurf@debian.org
+E: matthias@urlichs.de
+D: Consultant, developer, kernel hacker
+D: In a previous life, worked on Streams/ISDN/BSD networking code for Linux
+S: Schleiermacherstrasse 12
+S: 90491 Nuernberg
+S: Germany
+
+N: Geert Uytterhoeven
+E: geert@linux-m68k.org
+W: http://users.telenet.be/geertu/
+P: 1024/862678A6 C51D 361C 0BD1 4C90 B275  C553 6EEA 11BA 8626 78A6
+D: m68k/Amiga and PPC/CHRP Longtrail coordinator
+D: Frame buffer device and XF68_FBDev maintainer
+D: m68k IDE maintainer
+D: Amiga Zorro maintainer
+D: Amiga Buddha and Catweasel chipset IDE
+D: Atari Falcon chipset IDE
+D: Amiga Gayle chipset IDE
+D: mipsel NEC DDB Vrc-5074
+S: Haterbeekstraat 55B
+S: B-3200 Aarschot
+S: Belgium
+
+N: Chris Vance
+E: cvance@tislabs.com
+E: cvance@nai.com
+D: portions of the Linux Security Module (LSM) framework and security modules
+
+N: Petr Vandrovec
+E: petr@vandrovec.name
+D: Small contributions to ncpfs
+D: Matrox framebuffer driver
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
+
+N: Thibaut Varene
+E: T-Bone@parisc-linux.org
+W: http://www.parisc-linux.org/~varenet/
+P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C  FA2F 1E32 C3DA B7D2 F063
+D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits
+D: Some ARM at91rm9200 bits, S1D13XXX FB driver, random patches here and there
+D: AD1889 sound driver
+S: Paris, France
+
+N: Heikki Vatiainen
+E: hessu@cs.tut.fi
+D: Co-author of Multi-Protocol Over ATM (MPOA), some LANE hacks
+S: Tampere University of Technology / Telecom lab
+S: Hermiankatu 12C
+S: FIN-33720 Tampere
+S: Finland
+
+N: Andrew Veliath
+E: andrewtv@usa.net
+D: Turtle Beach MultiSound sound driver
+S: USA
+
+N: Dirk Verworner
+D: Co-author of German book ``Linux-Kernel-Programmierung''
+D: Co-founder of Berlin Linux User Group
+
+N: Riku Voipio
+E: riku.voipio@iki.fi
+D: Author of PCA9532 LED and Fintek f75375s hwmon driver
+D: Some random ARM board patches
+S: Finland
+
+N: Patrick Volkerding
+E: volkerdi@ftp.cdrom.com
+D: Produced the Slackware distribution, updated the SVGAlib
+D: patches for ghostscript, worked on color 'ls', etc.
+S: 301 15th Street S.
+S: Moorhead, Minnesota 56560
+S: USA 
+
+N: Jos Vos
+E: jos@xos.nl
+W: http://www.xos.nl/
+D: Various IP firewall updates, ipfwadm
+S: X/OS Experts in Open Systems BV
+S: Kruislaan 419
+S: 1098 VA Amsterdam 
+S: The Netherlands
+
+N: Jeroen Vreeken
+E: pe1rxq@amsat.org
+W: http://www.chello.nl/~j.vreeken/
+D: SE401 usb webcam driver
+D: ZD1201 usb wireless lan driver
+S: Maastrichterweg 63
+S: 5554 GG Valkenswaard
+S: The Netherlands
+
+N: Mark Wallis
+E: mwallis@serialmonkey.com
+W: http://mark.serialmonkey.com
+D: Ralink rt2x00 WLAN driver
+S: Newcastle, Australia
+
+N: Peter Shaobo Wang
+E: pwang@mmdcorp.com
+W: http://www.mmdcorp.com/pw/linux
+D: Driver for Interphase ATM (i)Chip SAR adapter card family (x575, x525, x531).
+S: 1513 Brewster Dr.
+S: Carrollton, TX 75010
+S: USA
+
+N: Tim Waugh
+E: tim@cyberelk.net
+D: Co-architect of the parallel-port sharing system
+S: 17 Curling Vale
+S: GUILDFORD
+S: Surrey
+S: GU2 7PJ
+S: United Kingdom
+
+N: Juergen Weigert
+E: jnweiger@immd4.informatik.uni-erlangen.de
+D: The Linux Support Team Erlangen
+
+N: David Weinehall
+E: tao@acc.umu.se
+P: 1024D/DC47CA16 7ACE 0FB0 7A74 F994 9B36  E1D1 D14E 8526 DC47 CA16
+W: http://www.acc.umu.se/~tao/
+D: v2.0 kernel maintainer
+D: Fixes for the NE/2-driver
+D: Miscellaneous MCA-support
+D: Cleanup of the Config-files
+
+N: Matt Welsh
+E: mdw@metalab.unc.edu
+W: http://www.cs.berkeley.edu/~mdw
+D: Original Linux Documentation Project coordinator
+D: Author, "Running Linux" (O'Reilly)
+D: Author, "Linux Installation and Getting Started" (LDP) and several HOWTOs
+D: Linuxdoc-SGML formatting system (now SGML-Tools)
+D: Device drivers for various high-speed network interfaces (Myrinet, ATM)
+D: Keithley DAS1200 device driver
+D: Original maintainer of sunsite WWW and FTP sites
+D: Original moderator of c.o.l.announce and c.o.l.answers
+S: Computer Science Division
+S: UC Berkeley
+S: Berkeley, CA 94720-1776
+S: USA
+
+N: Harald Welte
+E: laforge@netfilter.org
+P: 1024D/30F48BFF DBDE 6912 8831 9A53 879B  9190 5DA5 C655 30F4 8BFF
+W: http://gnumonks.org/users/laforge
+D: netfilter: new nat helper infrastructure
+D: netfilter: ULOG, ECN, DSCP target
+D: netfilter: TTL match
+D: netfilter: IPv6 mangle table
+D: netfilter: various other hacks
+S: Berlin
+S: Germany
+
+N: Bill Wendling
+E: wendling@ganymede.isdn.uiuc.edu
+W: http://www.ncsa.uiuc.edu/~wendling/
+D: Various random hacks. Mostly on poll/select logic.
+S: 605 E. Springfield Ave.
+S: Champaign, IL 61820
+S: USA
+
+N: Mike Westall
+D: IBM Turboways 25 ATM Device Driver
+E: westall@cs.clemson.edu
+S: Department of Computer Science
+S: Clemson University
+S: Clemson SC 29634 USA
+
+N: Greg Wettstein
+E: greg@wind.rmcc.com
+D: Filesystem valid flag for MINIX filesystem.
+D: Minor kernel debugging.
+D: Development and maintenance of sysklogd.
+D: Monitoring of development kernels for long-term stability.
+D: Early implementations of Linux in a commercial environment.
+S: Dr. Greg Wettstein, Ph.D.
+S: Oncology Research Division Computing Facility
+S: Roger Maris Cancer Center
+S: 820 4th St. N.
+S: Fargo, North Dakota 58122
+S: USA
+
+N: Steven Whitehouse
+E: steve@chygwyn.com
+W: http://www.chygwyn.com/~steve
+D: Linux DECnet project
+D: Minor debugging of other networking protocols.
+D: Misc bug fixes and GFS2 filesystem development
+
+N: Hans-Joachim Widmaier
+E: hjw@zvw.de
+D: AFFS rewrite
+S: Eichenweg 16
+S: 73650 Winterbach
+S: Germany
+
+N: Urban Widmark
+E: urban@svenskatest.se
+D: via-rhine, misc net driver hacking
+
+N: Marco van Wieringen
+E: mvw@planets.elm.net
+D: Author of process accounting and diskquota
+S: Breeburgsingel 12
+S: 2135 CN Hoofddorp
+S: The Netherlands
+
+N: Matthew Wilcox
+E: matthew@wil.cx
+W: ftp://ftp.uk.linux.org/pub/linux/people/willy/
+D: Linux/PARISC hacker.  Filesystem hacker.  Random other hacking.  Custom
+D: PPC port hacking.
+
+N: G\"unter Windau
+E: gunter@mbfys.kun.nl
+D: Some bug fixes in the polling printer driver (lp.c)
+S: University of Nijmegen
+S: Geert-Grooteplein Noord 21
+S: 6525 EZ Nijmegen
+S: The Netherlands
+
+N: Ulrich Windl
+E: Ulrich.Windl@rz.uni-regensburg.de
+P: 1024/E843660D CF D7 43 A1 5A 49 14 25  7C 04 A0 6E 4C 3A AC 6D
+D: Supports NTP on Linux.  Added PPS code.  Fixed bugs in adjtimex().
+S: Alte Regensburger Str. 11a
+S: 93149 Nittenau
+S: Germany
+
+N: Gertjan van Wingerde
+E: gwingerde@gmail.com
+D: Ralink rt2x00 WLAN driver
+D: Minix V2 file-system
+D: Misc fixes
+S: Geessinkweg 177
+S: 7544 TX Enschede
+S: The Netherlands
+
+N: Lars Wirzenius
+E: liw@iki.fi
+D: Linux System Administrator's Guide, author, former maintainer
+D: comp.os.linux.announce, former moderator
+D: Linux Documentation Project, co-founder
+D: Original sprintf in kernel
+D: Original kernel README (for version 0.97)
+D: Linux News (electronic magazine, now dead), founder and former editor
+D: Meta-FAQ, originator, former maintainer
+D: INFO-SHEET, former maintainer
+D: Author of the longest-living linux bug
+
+N: Jonathan Woithe
+E: jwoithe@just42.net
+W: http:/www.just42.net/jwoithe
+D: ALS-007 sound card extensions to Sound Blaster driver
+S: 20 Jordan St
+S: Valley View, SA 5093
+S: Australia
+
+N: Clifford Wolf
+E: god@clifford.at
+W: http://www.clifford.at/
+D: Menuconfig/lxdialog improvement
+S: Foehrengasse 16
+S: A-2333 Leopoldsdorf b. Wien
+S: Austria
+
+N: Roger E. Wolff
+E: R.E.Wolff@BitWizard.nl
+D: Written kmalloc/kfree
+D: Written Specialix IO8+ driver
+D: Written Specialix SX driver
+S: van Bronckhorststraat 12
+S: 2612 XV Delft
+S: The Netherlands
+
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
+N: David Woodhouse
+E: dwmw2@infradead.org
+D: JFFS2 file system, Memory Technology Device subsystem,
+D: various other stuff that annoyed me by not working.
+S: c/o Intel Corporation
+S: Pipers Way
+S: Swindon. SN3 1RJ
+S: England
+
+N: Chris Wright
+E: chrisw@sous-sol.org
+D: hacking on LSM framework and security modules.
+S: Portland, OR
+S: USA
+
+N: Michal Wronski
+E: michal.wronski@gmail.com
+D: POSIX message queues fs (with K. Benedyczak)
+S: Krakow
+S: Poland
+
+N: Frank Xia
+E: qx@math.columbia.edu
+D: Xiafs filesystem [defunct]
+S: 542 West 112th Street, 5N
+S: New York, New York 10025
+S: USA
+
+N: Li Yang
+E: leoli@freescale.com
+D: Freescale Highspeed USB device driver
+D: Freescale QE SoC support and Ethernet driver
+S: B-1206 Jingmao Guojigongyu
+S: 16 Baliqiao Nanjie, Beijing 101100
+S: People's Repulic of China
+
+N: Victor Yodaiken
+E: yodaiken@fsmlabs.com
+D: RTLinux (RealTime Linux)
+S: POB 1822 
+S: Socorro NM, 87801
+S: USA
+
+N: Hiroshi YOKOTA
+E: yokota@netlab.is.tsukuba.ac.jp
+D: Workbit NinjaSCSI-3/32Bi PCMCIA driver
+D: Workbit NinjaSCSI-32Bi/UDE driver
+S: Japan
+
+N: Hideaki YOSHIFUJI
+E: hideaki@yoshifuji.org
+E: yoshfuji@linux-ipv6.org
+W: http://www.yoshifuji.org/~hideaki/
+P: 1024D/E0620EEA 9022 65EB 1ECF 3AD1 0BDF  80D8 4807 F894 E062 0EEA
+D: IPv6 and other networking related stuff
+D: USAGI/WIDE Project, Keio University
+S: Jeunet Palace Kawasaki #1-201, 10-2, Furukawa-cho, Saiwai-ku
+S: Kawasaki, Kanagawa 212-0025
+S: Japan
+
+N: Eric Youngdale
+E: eric@andante.org
+W: http://www.andante.org
+D: General kernel hacker
+D: SCSI iso9660 and ELF
+S: 6389 Hawk View Lane
+S: Alexandria, Virginia 22312
+S: USA
+
+N: Niibe Yutaka
+E: gniibe@mri.co.jp
+D: PLIP driver
+D: Asynchronous socket I/O in the NET code
+S: Mitsubishi Research Institute, Inc.
+S: ARCO Tower 1-8-1 Shimomeguro Meguro-ku
+S: Tokyo 153
+S: Japan
+
+N: James R. Van Zandt
+E: jrv@vanzandt.mv.com
+P: 1024/E298966D F0 37 4F FD E5 7E C5 E6  F1 A0 1E 22 6F 46 DA 0C
+D: Author and maintainer of the Double Talk speech synthesizer driver
+S: 27 Spencer Drive
+S: Nashua, New Hampshire 03062
+S: USA
+
+N: Orest Zborowski
+E: orestz@eskimo.com
+D: XFree86 and kernel development
+S: 1507 145th Place SE #B5
+S: Bellevue, Washington 98007
+S: USA
+
+N: Richard Zidlicky
+E: rz@linux-m68k.org, rdzidlic@geocities.com
+W: http://www.geocities.com/rdzidlic
+D: Q40 port - see arch/m68k/q40/README
+D: various m68k hacks
+S: Germany
+
+N: Werner Zimmermann
+E: Werner.Zimmermann@fht-esslingen.de
+D: CDROM driver "aztcd" (Aztech/Okano/Orchid/Wearnes)
+S: Flandernstrasse 101
+S: D-73732 Esslingen
+S: Germany
+
+N: Roman Zippel
+E: zippel@linux-m68k.org
+D: AFFS and HFS filesystems, m68k maintainer, new kernel configuration in 2.5
+
+N: Leonard N. Zubkoff
+W: http://www.dandelion.com/Linux/
+D: BusLogic SCSI driver
+D: Mylex DAC960 PCI RAID driver
+D: Miscellaneous kernel fixes
+
+N: Alessandro Zummo
+E: a.zummo@towertech.it
+D: CMI8330 support is sb_card.c
+D: ISAPnP fixes in sb_card.c
+D: ZyXEL omni.net lcd plus driver
+D: RTC subsystem
+S: Italy
+
+N: Marc Zyngier
+E: maz@wild-wind.fr.eu.org
+W: http://www.misterjones.org
+D: MD driver
+D: EISA/sysfs subsystem
+S: France
+
+
+# Don't add your name here, unless you really _are_ after Marc
+# alphabetically. Leonard used to be very proud of being the 
+# last entry, and he'll get positively pissed if he can't even
+# be second-to-last.  (and this file really _is_ supposed to be
+# in alphabetic order)

linux-imx/Documentation/00-INDEX

diff --git a/linux-imx/Documentation/00-INDEX b/linux-imx/Documentation/00-INDEX
new file mode 100644
index 0000000..45b3df9
--- /dev/null
+++ b/linux-imx/Documentation/00-INDEX
@@ -0,0 +1,479 @@
+
+This is a brief list of all the files in ./linux/Documentation and what
+they contain. If you add a documentation file, please list it here in
+alphabetical order as well, or risk being hunted down like a rabid dog.
+Please keep the descriptions small enough to fit on one line.
+							 Thanks -- Paul G.
+
+Following translations are available on the WWW:
+
+   - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at
+     http://linuxjf.sourceforge.jp/
+
+00-INDEX
+	- this file.
+ABI/
+	- info on kernel <-> userspace ABI and relative interface stability.
+
+BUG-HUNTING
+	- brute force method of doing binary search of patches to find bug.
+Changes
+	- list of changes that break older software packages.
+CodingStyle
+	- how the maintainers expect the C code in the kernel to look.
+DMA-API.txt
+	- DMA API, pci_ API & extensions for non-consistent memory machines.
+DMA-API-HOWTO.txt
+	- Dynamic DMA mapping Guide
+DMA-ISA-LPC.txt
+	- How to do DMA with ISA (and LPC) devices.
+DMA-attributes.txt
+	- listing of the various possible attributes a DMA region can have
+DocBook/
+	- directory with DocBook templates etc. for kernel documentation.
+EDID/
+	- directory with info on customizing EDID for broken gfx/displays.
+HOWTO
+	- the process and procedures of how to do Linux kernel development.
+IPMI.txt
+	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
+IRQ-affinity.txt
+	- how to select which CPU(s) handle which interrupt events on SMP.
+IRQ-domain.txt
+	- info on inerrupt numbering and setting up IRQ domains.
+IRQ.txt
+	- description of what an IRQ is.
+Intel-IOMMU.txt
+	- basic info on the Intel IOMMU virtualization support.
+Makefile
+	- some files in Documentation dir are actually sample code to build
+ManagementStyle
+	- how to (attempt to) manage kernel hackers.
+RCU/
+	- directory with info on RCU (read-copy update).
+SAK.txt
+	- info on Secure Attention Keys.
+SM501.txt
+	- Silicon Motion SM501 multimedia companion chip
+SecurityBugs
+	- procedure for reporting security bugs found in the kernel.
+SubmitChecklist
+	- Linux kernel patch submission checklist.
+SubmittingDrivers
+	- procedure to get a new driver source included into the kernel tree.
+SubmittingPatches
+	- procedure to get a source patch included into the kernel tree.
+VGA-softcursor.txt
+	- how to change your VGA cursor from a blinking underscore.
+accounting/
+	- documentation on accounting and taskstats.
+acpi/
+	- info on ACPI-specific hooks in the kernel.
+aoe/
+	- description of AoE (ATA over Ethernet) along with config examples.
+applying-patches.txt
+	- description of various trees and how to apply their patches.
+arm/
+	- directory with info about Linux on the ARM architecture.
+arm64/
+	- directory with info about Linux on the 64 bit ARM architecture.
+atomic_ops.txt
+	- semantics and behavior of atomic and bitmask operations.
+auxdisplay/
+	- misc. LCD driver documentation (cfag12864b, ks0108).
+backlight/
+	- directory with info on controlling backlights in flat panel displays
+bad_memory.txt
+	- how to use kernel parameters to exclude bad RAM regions.
+basic_profiling.txt
+	- basic instructions for those who wants to profile Linux kernel.
+binfmt_misc.txt
+	- info on the kernel support for extra binary formats.
+blackfin/
+	- directory with documentation for the Blackfin arch.
+block/
+	- info on the Block I/O (BIO) layer.
+blockdev/
+	- info on block devices & drivers
+braille-console.txt
+	- info on how to use serial devices for Braille support.
+bt8xxgpio.txt
+	- info on how to modify a bt8xx video card for GPIO usage.
+btmrvl.txt
+	- info on Marvell Bluetooth driver usage.
+bus-devices/
+	- directory with info on TI GPMC (General Purpose Memory Controller)
+bus-virt-phys-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
+cachetlb.txt
+	- describes the cache/TLB flushing interfaces Linux uses.
+cdrom/
+	- directory with information on the CD-ROM drivers that Linux has.
+cgroups/
+	- cgroups features, including cpusets and memory controller.
+circular-buffers.txt
+	- how to make use of the existing circular buffer infrastructure
+clk.txt
+	- info on the common clock framework
+coccinelle.txt
+	- info on how to get and use the Coccinelle code checking tool.
+connector/
+	- docs on the netlink based userspace<->kernel space communication mod.
+console/
+	- documentation on Linux console drivers.
+cpu-freq/
+	- info on CPU frequency and voltage scaling.
+cpu-hotplug.txt
+	- document describing CPU hotplug support in the Linux kernel.
+cpu-load.txt
+	- document describing how CPU load statistics are collected.
+cpuidle/
+	- info on CPU_IDLE, CPU idle state management subsystem.
+cputopology.txt
+	- documentation on how CPU topology info is exported via sysfs.
+crc32.txt
+	- brief tutorial on CRC computation
+cris/
+	- directory with info about Linux on CRIS architecture.
+crypto/
+	- directory with info on the Crypto API.
+dcdbas.txt
+	- information on the Dell Systems Management Base Driver.
+debugging-modules.txt
+	- some notes on debugging modules after Linux 2.6.3.
+debugging-via-ohci1394.txt
+	- how to use firewire like a hardware debugger memory reader.
+dell_rbu.txt
+	- document demonstrating the use of the Dell Remote BIOS Update driver.
+development-process/
+	- how to work with the mainline kernel development process.
+device-mapper/
+	- directory with info on Device Mapper.
+devices.txt
+	- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
+devicetree/
+	- directory with info on device tree files used by OF/PowerPC/ARM
+digsig.txt
+	-info on the Digital Signature Verification API
+dma-buf-sharing.txt
+	- the DMA Buffer Sharing API Guide
+dmaengine.txt
+	-the DMA Engine API Guide
+dontdiff
+	- file containing a list of files that should never be diff'ed.
+driver-model/
+	- directory with info about Linux driver model.
+dvb/
+	- info on Linux Digital Video Broadcast (DVB) subsystem.
+dynamic-debug-howto.txt
+	- how to use the dynamic debug (dyndbg) feature.
+early-userspace/
+	- info about initramfs, klibc, and userspace early during boot.
+edac.txt
+	- information on EDAC - Error Detection And Correction
+eisa.txt
+	- info on EISA bus support.
+email-clients.txt
+	- info on how to use e-mail to send un-mangled (git) patches.
+extcon/
+	- directory with porting guide for Android kernel switch driver.
+fault-injection/
+	- dir with docs about the fault injection capabilities infrastructure.
+fb/
+	- directory with info on the frame buffer graphics abstraction layer.
+filesystems/
+	- info on the vfs and the various filesystems that Linux supports.
+firmware_class/
+	- request_firmware() hotplug interface info.
+flexible-arrays.txt
+	- how to make use of flexible sized arrays in linux
+frv/
+	- Fujitsu FR-V Linux documentation.
+futex-requeue-pi.txt
+	- info on requeueing of tasks from a non-PI futex to a PI futex
+gcov.txt
+	- use of GCC's coverage testing tool "gcov" with the Linux kernel
+gpio.txt
+	- overview of GPIO (General Purpose Input/Output) access conventions.
+hid/
+	- directory with information on human interface devices
+highuid.txt
+	- notes on the change from 16 bit to 32 bit user/group IDs.
+hwspinlock.txt
+	- hardware spinlock provides hardware assistance for synchronization
+timers/
+	- info on the timer related topics
+hw_random.txt
+	- info on Linux support for random number generator in i8xx chipsets.
+hwmon/
+	- directory with docs on various hardware monitoring drivers.
+i2c/
+	- directory with info about the I2C bus/protocol (2 wire, kHz speed).
+i2o/
+	- directory with info about the Linux I2O subsystem.
+x86/i386/
+	- directory with info about Linux on Intel 32 bit architecture.
+ia64/
+	- directory with info about Linux on Intel 64 bit architecture.
+infiniband/
+	- directory with documents concerning Linux InfiniBand support.
+init.txt
+	- what to do when the kernel can't find the 1st process to run.
+initrd.txt
+	- how to use the RAM disk as an initial/temporary root filesystem.
+input/
+	- info on Linux input device support.
+intel_txt.txt
+	- info on intel Trusted Execution Technology (intel TXT).
+io-mapping.txt
+	- description of io_mapping functions in linux/io-mapping.h
+io_ordering.txt
+	- info on ordering I/O writes to memory-mapped addresses.
+ioctl/
+	- directory with documents describing various IOCTL calls.
+iostats.txt
+	- info on I/O statistics Linux kernel provides.
+irqflags-tracing.txt
+	- how to use the irq-flags tracing feature.
+isapnp.txt
+	- info on Linux ISA Plug & Play support.
+isdn/
+	- directory with info on the Linux ISDN support, and supported cards.
+java.txt
+	- info on the in-kernel binary support for Java(tm).
+ja_JP/
+	- directory with Japanese translations of various documents
+kbuild/
+	- directory with info about the kernel build process.
+kdump/
+	- directory with mini HowTo on getting the crash dump code to work.
+kernel-doc-nano-HOWTO.txt
+	- mini HowTo on generation and location of kernel documentation files.
+kernel-docs.txt
+	- listing of various WWW + books that document kernel internals.
+kernel-parameters.txt
+	- summary listing of command line / boot prompt args for the kernel.
+kmemcheck.txt
+	- info on dynamic checker that detects uses of uninitialized memory.
+kmemleak.txt
+	- info on how to make use of the kernel memory leak detection system
+ko_KR/
+	- directory with Korean translations of various documents
+kobject.txt
+	- info of the kobject infrastructure of the Linux kernel.
+kprobes.txt
+	- documents the kernel probes debugging feature.
+kref.txt
+	- docs on adding reference counters (krefs) to kernel objects.
+laptops/
+	- directory with laptop related info and laptop driver documentation.
+ldm.txt
+	- a brief description of LDM (Windows Dynamic Disks).
+leds/
+	- directory with info about LED handling under Linux.
+local_ops.txt
+	- semantics and behavior of local atomic operations.
+lockdep-design.txt
+	- documentation on the runtime locking correctness validator.
+lockstat.txt
+	- info on collecting statistics on locks (and contention).
+lockup-watchdogs.txt
+	- info on soft and hard lockup detectors (aka nmi_watchdog).
+logo.gif
+	- full colour GIF image of Linux logo (penguin - Tux).
+logo.txt
+	- info on creator of above logo & site to get additional images from.
+m68k/
+	- directory with info about Linux on Motorola 68k architecture.
+magic-number.txt
+	- list of magic numbers used to mark/protect kernel data structures.
+md.txt
+	- info on boot arguments for the multiple devices driver.
+media-framework.txt
+	- info on media framework, its data structures, functions and usage.
+memory-barriers.txt
+	- info on Linux kernel memory barriers.
+memory-devices/
+	- directory with info on parts like the Texas Instruments EMIF driver
+memory-hotplug.txt
+	- Hotpluggable memory support, how to use and current status.
+memory.txt
+	- info on typical Linux memory problems.
+metag/
+	- directory with info about Linux on Meta architecture.
+mips/
+	- directory with info about Linux on MIPS architecture.
+misc-devices/
+	- directory with info about devices using the misc dev subsystem
+mmc/
+	- directory with info about the MMC subsystem
+mn10300/
+	- directory with info about the mn10300 architecture port
+mtd/
+	- directory with info about memory technology devices (flash)
+mono.txt
+	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
+mutex-design.txt
+	- info on the generic mutex subsystem.
+namespaces/
+	- directory with various information about namespaces
+netlabel/
+	- directory with information on the NetLabel subsystem.
+networking/
+	- directory with info on various aspects of networking with Linux.
+nfc/
+	- directory relating info about Near Field Communications support.
+nommu-mmap.txt
+	- documentation about no-mmu memory mapping support.
+numastat.txt
+	- info on how to read Numa policy hit/miss statistics in sysfs.
+oops-tracing.txt
+	- how to decode those nasty internal kernel error dump messages.
+padata.txt
+	- An introduction to the "padata" parallel execution API
+parisc/
+	- directory with info on using Linux on PA-RISC architecture.
+parport.txt
+	- how to use the parallel-port driver.
+parport-lowlevel.txt
+	- description and usage of the low level parallel port functions.
+pcmcia/
+	- info on the Linux PCMCIA driver.
+percpu-rw-semaphore.txt
+	- RCU based read-write semaphore optimized for locking for reading
+pi-futex.txt
+	- documentation on lightweight priority inheritance futexes.
+pinctrl.txt
+	- info on pinctrl subsystem and the PINMUX/PINCONF and drivers
+pnp.txt
+	- Linux Plug and Play documentation.
+power/
+	- directory with info on Linux PCI power management.
+powerpc/
+	- directory with info on using Linux with the PowerPC.
+prctl/
+	- directory with info on the priveledge control subsystem
+preempt-locking.txt
+	- info on locking under a preemptive kernel.
+printk-formats.txt
+	- how to get printk format specifiers right
+pps/
+	- directory with information on the pulse-per-second support
+ptp/
+	- directory with info on support for IEEE 1588 PTP clocks in Linux.
+pwm.txt
+	- info on the pulse width modulation driver subsystem
+ramoops.txt
+	- documentation of the ramoops oops/panic logging module.
+rapidio/
+	- directory with info on RapidIO packet-based fabric interconnect
+rbtree.txt
+	- info on what red-black trees are and what they are for.
+remoteproc.txt
+	- info on how to handle remote processor (e.g. AMP) offloads/usage.
+rfkill.txt
+	- info on the radio frequency kill switch subsystem/support.
+robust-futex-ABI.txt
+	- documentation of the robust futex ABI.
+robust-futexes.txt
+	- a description of what robust futexes are.
+rpmsg.txt
+	- info on the Remote Processor Messaging (rpmsg) Framework
+rt-mutex-design.txt
+	- description of the RealTime mutex implementation design.
+rt-mutex.txt
+	- desc. of RT-mutex subsystem with PI (Priority Inheritance) support.
+rtc.txt
+	- notes on how to use the Real Time Clock (aka CMOS clock) driver.
+s390/
+	- directory with info on using Linux on the IBM S390.
+scheduler/
+	- directory with info on the scheduler.
+scsi/
+	- directory with info on Linux scsi support.
+security/
+	- directory that contains security-related info
+serial/
+	- directory with info on the low level serial API.
+serial-console.txt
+	- how to set up Linux with a serial line console as the default.
+sgi-ioc4.txt
+	- description of the SGI IOC4 PCI (multi function) device.
+sgi-visws.txt
+	- short blurb on the SGI Visual Workstations.
+sh/
+	- directory with info on porting Linux to a new architecture.
+smsc_ece1099.txt
+	-info on the smsc Keyboard Scan Expansion/GPIO Expansion device.
+sound/
+	- directory with info on sound card support.
+sparse.txt
+	- info on how to obtain and use the sparse tool for typechecking.
+spi/
+	- overview of Linux kernel Serial Peripheral Interface (SPI) support.
+spinlocks.txt
+	- info on using spinlocks to provide exclusive access in kernel.
+stable_api_nonsense.txt
+	- info on why the kernel does not have a stable in-kernel api or abi.
+stable_kernel_rules.txt
+	- rules and procedures for the -stable kernel releases.
+static-keys.txt
+	- info on how static keys allow debug code in hotpaths via patching
+svga.txt
+	- short guide on selecting video modes at boot via VGA BIOS.
+sysfs-rules.txt
+	- How not to use sysfs.
+sysctl/
+	- directory with info on the /proc/sys/* files.
+sysrq.txt
+	- info on the magic SysRq key.
+target/
+	- directory with info on generating TCM v4 fabric .ko modules
+thermal/
+	- directory with information on managing thermal issues (CPU/temp)
+trace/
+	- directory with info on tracing technologies within linux
+unaligned-memory-access.txt
+	- info on how to avoid arch breaking unaligned memory access in code.
+unicode.txt
+	- info on the Unicode character/font mapping used in Linux.
+unshare.txt
+	- description of the Linux unshare system call.
+usb/
+	- directory with info regarding the Universal Serial Bus.
+vDSO/
+	- directory with info regarding virtual dynamic shared objects
+vfio.txt
+	- info on Virtual Function I/O used in guest/hypervisor instances.
+vgaarbiter.txt
+	- info on enable/disable the legacy decoding on different VGA devices
+video-output.txt
+	- sysfs class driver interface to enable/disable a video output device.
+video4linux/
+	- directory with info regarding video/TV/radio cards and linux.
+virtual/
+	- directory with information on the various linux virtualizations.
+vm/
+	- directory with info on the Linux vm code.
+vme_api.txt
+	- file relating info on the VME bus API in linux
+volatile-considered-harmful.txt
+	- Why the "volatile" type class should not be used
+w1/
+	- directory with documents regarding the 1-wire (w1) subsystem.
+watchdog/
+	- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
+wimax/
+	- directory with info about Intel Wireless Wimax Connections
+workqueue.txt
+	- information on the Concurrency Managed Workqueue implementation
+x86/x86_64/
+	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
+xtensa/
+	- directory with documents relating to arch/xtensa port/implementation
+xz.txt
+	- how to make use of the XZ data compression within linux kernel
+zh_CN/
+	- directory with Chinese translations of various documents
+zorro.txt
+	- info on writing drivers for Zorro bus devices found on Amigas.

linux-imx/Documentation/ABI/README

diff --git a/linux-imx/Documentation/ABI/README b/linux-imx/Documentation/ABI/README
new file mode 100644
index 0000000..1006982
--- /dev/null
+++ b/linux-imx/Documentation/ABI/README
@@ -0,0 +1,74 @@
+This directory attempts to document the ABI between the Linux kernel and
+userspace, and the relative stability of these interfaces.  Due to the
+everchanging nature of Linux, and the differing maturity levels, these
+interfaces should be used by userspace programs in different ways.
+
+We have four different levels of ABI stability, as shown by the four
+different subdirectories in this location.  Interfaces may change levels
+of stability according to the rules described below.
+
+The different levels of stability are:
+
+  stable/
+	This directory documents the interfaces that the developer has
+	defined to be stable.  Userspace programs are free to use these
+	interfaces with no restrictions, and backward compatibility for
+	them will be guaranteed for at least 2 years.  Most interfaces
+	(like syscalls) are expected to never change and always be
+	available.
+
+  testing/
+	This directory documents interfaces that are felt to be stable,
+	as the main development of this interface has been completed.
+	The interface can be changed to add new features, but the
+	current interface will not break by doing this, unless grave
+	errors or security problems are found in them.  Userspace
+	programs can start to rely on these interfaces, but they must be
+	aware of changes that can occur before these interfaces move to
+	be marked stable.  Programs that use these interfaces are
+	strongly encouraged to add their name to the description of
+	these interfaces, so that the kernel developers can easily
+	notify them if any changes occur (see the description of the
+	layout of the files below for details on how to do this.)
+
+  obsolete/
+  	This directory documents interfaces that are still remaining in
+	the kernel, but are marked to be removed at some later point in
+	time.  The description of the interface will document the reason
+	why it is obsolete and when it can be expected to be removed.
+
+  removed/
+	This directory contains a list of the old interfaces that have
+	been removed from the kernel.
+
+Every file in these directories will contain the following information:
+
+What:		Short description of the interface
+Date:		Date created
+KernelVersion:	Kernel version this feature first showed up in.
+Contact:	Primary contact for this interface (may be a mailing list)
+Description:	Long description of the interface and how to use it.
+Users:		All users of this interface who wish to be notified when
+		it changes.  This is very important for interfaces in
+		the "testing" stage, so that kernel developers can work
+		with userspace developers to ensure that things do not
+		break in ways that are unacceptable.  It is also
+		important to get feedback for these interfaces to make
+		sure they are working in a proper way and do not need to
+		be changed further.
+
+
+How things move between levels:
+
+Interfaces in stable may move to obsolete, as long as the proper
+notification is given.
+
+Interfaces may be removed from obsolete and the kernel as long as the
+documented amount of time has gone by.
+
+Interfaces in the testing state can move to the stable state when the
+developers feel they are finished.  They cannot be removed from the
+kernel tree without going through the obsolete state first.
+
+It's up to the developer to place their interfaces in the category they
+wish for it to start out in.

linux-imx/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads

diff --git a/linux-imx/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads b/linux-imx/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads
new file mode 100644
index 0000000..b0b0eeb
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads
@@ -0,0 +1,5 @@
+What:		/proc/sys/vm/nr_pdflush_threads
+Date:		June 2012
+Contact:	Wanpeng Li <liwp@linux.vnet.ibm.com>
+Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush
+             exported in /proc/sys/vm/ should be removed.

linux-imx/Documentation/ABI/obsolete/sysfs-bus-usb

diff --git a/linux-imx/Documentation/ABI/obsolete/sysfs-bus-usb b/linux-imx/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 0000000..bd096d3
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, either "on" or "auto".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.
+
+		During normal use, devices should be left in the "auto"
+		level.  The "on" level is meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
+
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
+		This file is deprecated and will be removed after 2010.
+		Use the power/control file instead; it does exactly the
+		same thing.

linux-imx/Documentation/ABI/obsolete/sysfs-class-rfkill

diff --git a/linux-imx/Documentation/ABI/obsolete/sysfs-class-rfkill b/linux-imx/Documentation/ABI/obsolete/sysfs-class-rfkill
new file mode 100644
index 0000000..ff60ad9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/sysfs-class-rfkill
@@ -0,0 +1,29 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file is deprecated and scheduled to be removed in 2014,
+		because its not possible to express the 'soft and hard block'
+		state of the rfkill driver.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/claim
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description:	This file is deprecated because there no longer is a way to
+		claim just control over a single rfkill instance.
+		This file is scheduled to be removed in 2012.
+Values: 	0: Kernel handles events

linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus

diff --git a/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
new file mode 100644
index 0000000..833fd59
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
@@ -0,0 +1,48 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+		Please use actual_profile, it does the same thing.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Please read binary attribute info which contains firmware version.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 77 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 43 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
\ No newline at end of file

linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus

diff --git a/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 0000000..4a98e02
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,66 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-4.
+		When read, this attribute returns the number of the active
+		cpi level.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in x direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in y direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Obsoleted by binary sysfs attribute "info".
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 23 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 16 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra

diff --git a/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 0000000..87ac87e
--- /dev/null
+++ b/linux-imx/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,73 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+		Please use binary attribute "info" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/removed/devfs

diff --git a/linux-imx/Documentation/ABI/removed/devfs b/linux-imx/Documentation/ABI/removed/devfs
new file mode 100644
index 0000000..0020c49
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/devfs
@@ -0,0 +1,12 @@
+What:		devfs
+Date:		July 2005 (scheduled), finally removed in kernel v2.6.18
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+	devfs has been unmaintained for a number of years, has unfixable
+	races, contains a naming policy within the kernel that is
+	against the LSB, and can be replaced by using udev.
+	The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
+	along with the assorted devfs function calls throughout the
+	kernel tree.
+
+Users:

linux-imx/Documentation/ABI/removed/dv1394

diff --git a/linux-imx/Documentation/ABI/removed/dv1394 b/linux-imx/Documentation/ABI/removed/dv1394
new file mode 100644
index 0000000..c2310b6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/dv1394
@@ -0,0 +1,14 @@
+What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/dv1394/* were character device files, one for each FireWire
+	controller and for NTSC and PAL respectively, from which DV data
+	could be received by read() or transmitted by write().  A few
+	ioctl()s allowed limited control.
+	This special-purpose interface has been superseded by libraw1394 +
+	libiec61883 which are functionally equivalent, support HDV, and
+	transparently work on top of the newer firewire kernel drivers.
+
+Users:
+	ffmpeg/libavformat (if configured for DV1394)

linux-imx/Documentation/ABI/removed/ip_queue

diff --git a/linux-imx/Documentation/ABI/removed/ip_queue b/linux-imx/Documentation/ABI/removed/ip_queue
new file mode 100644
index 0000000..3243613
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/ip_queue
@@ -0,0 +1,9 @@
+What:		ip_queue
+Date:		finally removed in kernel v3.5.0
+Contact:	Pablo Neira Ayuso <pablo@netfilter.org>
+Description:
+	ip_queue has been replaced by nfnetlink_queue which provides
+	more advanced queueing mechanism to user-space. The ip_queue
+	module was already announced to become obsolete years ago.
+
+Users:

linux-imx/Documentation/ABI/removed/o2cb

diff --git a/linux-imx/Documentation/ABI/removed/o2cb b/linux-imx/Documentation/ABI/removed/o2cb
new file mode 100644
index 0000000..20c91ad
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/o2cb
@@ -0,0 +1,10 @@
+What:		/sys/o2cb symlink
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
+		removed when new versions of ocfs2-tools which know to look
+		in /sys/fs/o2cb are sufficiently prevalent. Don't code new
+		software to look here, it should try /sys/fs/o2cb instead.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.

linux-imx/Documentation/ABI/removed/raw1394

diff --git a/linux-imx/Documentation/ABI/removed/raw1394 b/linux-imx/Documentation/ABI/removed/raw1394
new file mode 100644
index 0000000..ec333e6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/raw1394
@@ -0,0 +1,15 @@
+What:		raw1394 (a.k.a. "Raw IEEE1394 I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/raw1394 was a character device file that allowed low-level
+	access to FireWire buses.  Its major drawbacks were its inability
+	to implement sensible device security policies, and its low level
+	of abstraction that required userspace clients to duplicate much
+	of the kernel's ieee1394 core functionality.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libraw1394 (works with firewire-cdev too, transparent to library ABI
+	users)

linux-imx/Documentation/ABI/removed/video1394

diff --git a/linux-imx/Documentation/ABI/removed/video1394 b/linux-imx/Documentation/ABI/removed/video1394
new file mode 100644
index 0000000..c39c25a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/removed/video1394
@@ -0,0 +1,16 @@
+What:		video1394 (a.k.a. "OHCI-1394 Video support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/video1394/* were character device files, one for each FireWire
+	controller, which were used for isochronous I/O.  It was added as an
+	alternative to raw1394's isochronous I/O functionality which had
+	performance issues in its first generation.  Any video1394 user had
+	to use raw1394 + libraw1394 too because video1394 did not provide
+	asynchronous I/O for device discovery and configuration.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libdc1394 (works with firewire-cdev too, transparent to library ABI
+	users)

linux-imx/Documentation/ABI/stable/firewire-cdev

diff --git a/linux-imx/Documentation/ABI/stable/firewire-cdev b/linux-imx/Documentation/ABI/stable/firewire-cdev
new file mode 100644
index 0000000..16d0308
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/firewire-cdev
@@ -0,0 +1,103 @@
+What:		/dev/fw[0-9]+
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		The character device files /dev/fw* are the interface between
+		firewire-core and IEEE 1394 device drivers implemented in
+		userspace.  The ioctl(2)- and read(2)-based ABI is defined and
+		documented in <linux/firewire-cdev.h>.
+
+		This ABI offers most of the features which firewire-core also
+		exposes to kernelspace IEEE 1394 drivers.
+
+		Each /dev/fw* is associated with one IEEE 1394 node, which can
+		be remote or local nodes.  Operations on a /dev/fw* file have
+		different scope:
+		  - The 1394 node which is associated with the file:
+			  - Asynchronous request transmission
+			  - Get the Configuration ROM
+			  - Query node ID
+			  - Query maximum speed of the path between this node
+			    and local node
+		  - The 1394 bus (i.e. "card") to which the node is attached to:
+			  - Isochronous stream transmission and reception
+			  - Asynchronous stream transmission and reception
+			  - Asynchronous broadcast request transmission
+			  - PHY packet transmission and reception
+			  - Allocate, reallocate, deallocate isochronous
+			    resources (channels, bandwidth) at the bus's IRM
+			  - Query node IDs of local node, root node, IRM, bus
+			    manager
+			  - Query cycle time
+			  - Bus reset initiation, bus reset event reception
+		  - All 1394 buses:
+			  - Allocation of IEEE 1212 address ranges on the local
+			    link layers, reception of inbound requests to such
+			    an address range, asynchronous response transmission
+			    to inbound requests
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+
+		Due to the different scope of operations and in order to let
+		userland implement different access permission models, some
+		operations are restricted to /dev/fw* files that are associated
+		with a local node:
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+			  - PHY packet transmission and reception
+
+		A /dev/fw* file remains associated with one particular node
+		during its entire life time.  Bus topology changes, and hence
+		node ID changes, are tracked by firewire-core.  ABI users do not
+		need to be aware of topology.
+
+		The following file operations are supported:
+
+		open(2)
+		Currently the only useful flags are O_RDWR.
+
+		ioctl(2)
+		Initiate various actions.  Some take immediate effect, others
+		are performed asynchronously while or after the ioctl returns.
+		See the inline documentation in <linux/firewire-cdev.h> for
+		descriptions of all ioctls.
+
+		poll(2), select(2), epoll_wait(2) etc.
+		Watch for events to become available to be read.
+
+		read(2)
+		Receive various events.  There are solicited events like
+		outbound asynchronous transaction completion or isochronous
+		buffer completion, and unsolicited events such as bus resets,
+		request reception, or PHY packet reception.  Always use a read
+		buffer which is large enough to receive the largest event that
+		could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		of all event types and for which ioctls affect reception of
+		events.
+
+		mmap(2)
+		Allocate a DMA buffer for isochronous reception or transmission
+		and map it into the process address space.  The arguments should
+		be used as follows:  addr = NULL, length = the desired buffer
+		size, i.e. number of packets times size of largest packet,
+		prot = at least PROT_READ for reception and at least PROT_WRITE
+		for transmission, flags = MAP_SHARED, fd = the handle to the
+		/dev/fw*, offset = 0.
+
+		Isochronous reception works in packet-per-buffer fashion except
+		for multichannel reception which works in buffer-fill mode.
+
+		munmap(2)
+		Unmap the isochronous I/O buffer from the process address space.
+
+		close(2)
+		Besides stopping and freeing I/O contexts that were associated
+		with the file descriptor, back out any changes to the local
+		nodes' Configuration ROM.  Deallocate isochronous channels and
+		bandwidth at the IRM that were marked for kernel-assisted
+		re- and deallocation.
+
+Users:		libraw1394
+		libdc1394
+		tools like jujuutils, fwhack, ...

linux-imx/Documentation/ABI/stable/o2cb

diff --git a/linux-imx/Documentation/ABI/stable/o2cb b/linux-imx/Documentation/ABI/stable/o2cb
new file mode 100644
index 0000000..5eb1545
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/o2cb
@@ -0,0 +1,10 @@
+What:		/sys/fs/o2cb/ (was /sys/o2cb)
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.

linux-imx/Documentation/ABI/stable/syscalls

diff --git a/linux-imx/Documentation/ABI/stable/syscalls b/linux-imx/Documentation/ABI/stable/syscalls
new file mode 100644
index 0000000..c3ae3e7
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.

linux-imx/Documentation/ABI/stable/sysfs-acpi-pmprofile

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-acpi-pmprofile b/linux-imx/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 0000000..964c7a8
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,22 @@
+What: 		/sys/firmware/acpi/pm_profile
+Date:		03-Nov-2011
+KernelVersion:	v3.2
+Contact:	linux-acpi@vger.kernel.org
+Description: 	The ACPI pm_profile sysfs interface exports the platform
+		power management (and performance) requirement expectations
+		as provided by BIOS. The integer value is directly passed as
+		retrieved from the FADT ACPI table.
+Values:         For possible values see ACPI specification:
+		5.2.9 Fixed ACPI Description Table (FADT)
+		Field: Preferred_PM_Profile
+
+		Currently these values are defined by spec:
+		0 Unspecified
+		1 Desktop
+		2 Mobile
+		3 Workstation
+		4 Enterprise Server
+		5 SOHO Server
+		6 Appliance PC
+		7 Performance Server
+		>7 Reserved

linux-imx/Documentation/ABI/stable/sysfs-bus-firewire

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-bus-firewire b/linux-imx/Documentation/ABI/stable/sysfs-bus-firewire
new file mode 100644
index 0000000..41e5a0c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-bus-firewire
@@ -0,0 +1,133 @@
+What:		/sys/bus/firewire/devices/fw[0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attributes.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		config_rom
+			Contents of the Configuration ROM register.
+			Binary attribute; an array of host-endian u32.
+
+		guid
+			The node's EUI-64 in the bus information block of
+			Configuration ROM.
+			Hexadecimal string representation of an u64.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/units
+Date:		June 2009
+KernelVersion:	2.6.31
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		units
+			Summary of all units present in an IEEE 1394 node.
+			Contains space-separated tuples of specifier_id and
+			version of each unit present in the node.  Specifier_id
+			and version are hexadecimal string representations of
+			u24 of the respective unit directory entries.
+			Specifier_id and version within each tuple are separated
+			by a colon.
+
+Users:		udev rules to set ownership and access permissions or ACLs of
+		/dev/fw[0-9]+ character device files
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/is_local
+Date:		July 2012
+KernelVersion:	3.6
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only and immutable.
+Values:		1: The sysfs entry represents a local node (a controller card).
+		0: The sysfs entry represents a remote node.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 unit device attributes.
+		Read-only.  Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		modalias
+			Same as MODALIAS in the uevent at device creation.
+
+		rom_index
+			Offset of the unit directory within the parent device's
+			(node device's) Configuration ROM, in quadlets.
+			Decimal string representation.
+
+
+What:		/sys/bus/firewire/devices/*/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		Attributes common to IEEE 1394 node devices and unit devices.
+		Read-only.  Mutable during the node device's lifetime.
+		Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		These attributes are only created if the root directory of an
+		IEEE 1394 node or the unit directory of an IEEE 1394 unit
+		actually contains according entries.
+
+		hardware_version
+			Hexadecimal string representation of an u24.
+
+		hardware_version_name
+			Contents of a respective textual descriptor leaf.
+
+		model
+			Hexadecimal string representation of an u24.
+
+		model_name
+			Contents of a respective textual descriptor leaf.
+
+		specifier_id
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+		vendor
+			Hexadecimal string representation of an u24.
+			Mandatory in the root directory according to IEEE 1212.
+
+		vendor_name
+			Contents of a respective textual descriptor leaf.
+
+		version
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+
+What:		/sys/bus/firewire/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+		formerly
+		/sys/bus/ieee1394/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+Date:		Feb 2004
+KernelVersion:	2.6.4
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		SCSI target port identifier and logical unit identifier of a
+		logical unit of an SBP-2 target.  The identifiers are specified
+		in SAM-2...SAM-4 annex A.  They are persistent and world-wide
+		unique properties the SBP-2 attached target.
+
+		Read-only attribute, immutable during the target's lifetime.
+		Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
+		Colon-separated hexadecimal string representations of
+			u64 EUI-64 : u24 directory_ID : u16 LUN
+		without 0x prefixes, without whitespace.  The former sbp2 driver
+		(removed in 2.6.37 after being superseded by firewire-sbp2) used
+		a somewhat shorter format which was not as close to SAM.
+
+Users:		udev rules to create /dev/disk/by-id/ symlinks

linux-imx/Documentation/ABI/stable/sysfs-bus-xen-backend

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-bus-xen-backend b/linux-imx/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 0000000..3d5951c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,75 @@
+What:		/sys/bus/xen-backend/devices/*/devtype
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The type of the device.  e.g., one of: 'vbd' (block),
+                'vif' (network), or 'vfb' (framebuffer).
+
+What:		/sys/bus/xen-backend/devices/*/nodename
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                XenStore node (under /local/domain/NNN/) for this
+                backend device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/physical_device
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The major:minor number (in hexidecimal) of the
+                physical device providing the storage for this backend
+                block device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/mode
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Whether the block device is read-only ('r') or
+                read-write ('w').
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of flush requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of requests delayed because the backend was too
+                busy processing previous requests.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of read requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors read by the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of write requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors written by the frontend.

linux-imx/Documentation/ABI/stable/sysfs-class-backlight

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-class-backlight b/linux-imx/Documentation/ABI/stable/sysfs-class-backlight
new file mode 100644
index 0000000..70302f3
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-class-backlight
@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/type
+Date:		September 2010
+KernelVersion:	2.6.37
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The type of interface controlled by <backlight>.
+		"firmware": The driver uses a standard firmware interface
+		"platform": The driver uses a platform-specific interface
+		"raw": The driver controls hardware registers directly
+
+		In the general case, when multiple backlight
+		interfaces are available for a single device, firmware
+		control should be preferred to platform control should
+		be preferred to raw control. Using a firmware
+		interface reduces the probability of confusion with
+		the hardware and the OS independently updating the
+		backlight state. Platform interfaces are mostly a
+		holdover from pre-standardisation of firmware
+		interfaces.

linux-imx/Documentation/ABI/stable/sysfs-class-rfkill

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-class-rfkill b/linux-imx/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 0000000..097f522
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,67 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+For the deprecated /sys/class/rfkill/*/state and
+/sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/obsolete/sysfs-class-rfkill.
+
+What: 		/sys/class/rfkill
+Date:		09-Jul-2007
+KernelVersion:	v2.6.22
+Contact:	linux-wireless@vger.kernel.org,
+Description: 	The rfkill class subsystem folder.
+		Each registered rfkill driver is represented by an rfkillX
+		subfolder (X being an integer > 0).
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/name
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Name assigned by driver to this key (interface or driver name).
+Values: 	arbitrary string.
+
+
+What: 		/sys/class/rfkill/rfkill[0-9]+/type
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Driver type string ("wlan", "bluetooth", etc).
+Values: 	See include/linux/rfkill.h.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/persistent
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Whether the soft blocked state is initialised from non-volatile
+		storage at startup.
+Values: 	A numeric value.
+		0: false
+		1: true
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/hard
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current hardblock state. This file is read only.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/soft
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description:	Current softblock state. This file is read and write.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is turned off by software.

linux-imx/Documentation/ABI/stable/sysfs-class-tpm

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-class-tpm b/linux-imx/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 0000000..a60b45e
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,185 @@
+What:		/sys/class/misc/tpmX/device/
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The device/ directory under a specific TPM instance exposes
+		the properties of that TPM chip
+
+
+What:		/sys/class/misc/tpmX/device/active
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "active" property prints a '1' if the TPM chip is accepting
+		commands. An inactive TPM chip still contains all the state of
+		an active chip (Storage Root Key, NVRAM, etc), and can be
+		visible to the OS, but will only accept a restricted set of
+		commands. See the TPM Main Specification part 2, Structures,
+		section 17 for more information on which commands are
+		available.
+
+What:		/sys/class/misc/tpmX/device/cancel
+Date:		June 2005
+KernelVersion:	2.6.13
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "cancel" property allows you to cancel the currently
+		pending TPM command. Writing any value to cancel will call the
+		TPM vendor specific cancel operation.
+
+What:		/sys/class/misc/tpmX/device/caps
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "caps" property contains TPM manufacturer and version info.
+
+		Example output:
+
+		Manufacturer: 0x53544d20
+		TCG version: 1.2
+		Firmware version: 8.16
+
+		Manufacturer is a hex dump of the 4 byte manufacturer info
+		space in a TPM. TCG version shows the TCG TPM spec level that
+		the chip supports. Firmware version is that of the chip and
+		is manufacturer specific.
+
+What:		/sys/class/misc/tpmX/device/durations
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "durations" property shows the 3 vendor-specific values
+		used to wait for a short, medium and long TPM command. All
+		TPM commands are categorized as short, medium or long in
+		execution time, so that the driver doesn't have to wait
+		any longer than necessary before starting to poll for a
+		result.
+
+		Example output:
+
+		3015000 4508000 180995000 [original]
+
+		Here the short, medium and long durations are displayed in
+		usecs. "[original]" indicates that the values are displayed
+		unmodified from when they were queried from the chip.
+		Durations can be modified in the case where a buggy chip
+		reports them in msec instead of usec and they need to be
+		scaled to be displayed in usecs. In this case "[adjusted]"
+		will be displayed in place of "[original]".
+
+What:		/sys/class/misc/tpmX/device/enabled
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
+		meaning that it should be visible to the OS. This property
+		may be visible but produce a '0' after some operation that
+		disables the TPM.
+
+What:		/sys/class/misc/tpmX/device/owned
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
+		ordinal has been executed successfully in the chip. A '0'
+		indicates that ownership hasn't been taken.
+
+What:		/sys/class/misc/tpmX/device/pcrs
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pcrs" property will dump the current value of all Platform
+		Configuration Registers in the TPM. Note that since these
+		values may be constantly changing, the output is only valid
+		for a snapshot in time.
+
+		Example output:
+
+		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		...
+
+		The number of PCRs and hex bytes needed to represent a PCR
+		value will vary depending on TPM chip version. For TPM 1.1 and
+		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+		long. Use the "caps" property to determine TPM version.
+
+What:		/sys/class/misc/tpmX/device/pubek
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "pubek" property will return the TPM's public endorsement
+		key if possible. If the TPM has had ownership established and
+		is version 1.2, the pubek will not be available without the
+		owner's authorization. Since the TPM driver doesn't store any
+		secrets, it can't authorize its own request for the pubek,
+		making it unaccessible. The public endorsement key is gener-
+		ated at TPM menufacture time and exists for the life of the
+		chip.
+
+		Example output:
+
+		Algorithm: 00 00 00 01
+		Encscheme: 00 03
+		Sigscheme: 00 01
+		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		Modulus length: 256
+		Modulus:
+		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values:
+
+		Algorithm:	TPM_ALG_RSA			(1)
+		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
+		Sigscheme:	TPM_SS_NONE			(1)
+		Parameters, a byte string of 3 u32 values:
+			Key Length (bits):	00 00 08 00	(2048)
+			Num primes:		00 00 00 02	(2)
+			Exponent Size:		00 00 00 00	(0 means the
+								 default exp)
+		Modulus Length: 256 (bytes)
+		Modulus:	The 256 byte Endorsement Key modulus
+
+What:		/sys/class/misc/tpmX/device/temp_deactivated
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "temp_deactivated" property returns a '1' if the chip has
+		been temporarily dectivated, usually until the next power
+		cycle. Whether a warm boot (reboot) will clear a TPM chip
+		from a temp_deactivated state is platform specific.
+
+What:		/sys/class/misc/tpmX/device/timeouts
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	tpmdd-devel@lists.sf.net
+Description:	The "timeouts" property shows the 4 vendor-specific values
+		for the TPM's interface spec timeouts. The use of these
+		timeouts is defined by the TPM interface spec that the chip
+		conforms to.
+
+		Example output:
+
+		750000 750000 750000 750000 [original]
+
+		The four timeout values are shown in usecs, with a trailing
+		"[original]" or "[adjusted]" depending on whether the values
+		were scaled by the driver to be reported in usec from msecs.

linux-imx/Documentation/ABI/stable/sysfs-class-ubi

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-class-ubi b/linux-imx/Documentation/ABI/stable/sysfs-class-ubi
new file mode 100644
index 0000000..18d471d
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-class-ubi
@@ -0,0 +1,212 @@
+What:		/sys/class/ubi/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The ubi/ class sub-directory belongs to the UBI subsystem and
+		provides general UBI information, per-UBI device information
+		and per-UBI volume information.
+
+What:		/sys/class/ubi/version
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		This file contains version of the latest supported UBI on-media
+		format. Currently it is 1, and there is no plan to change this.
+		However, if in the future UBI needs on-flash format changes
+		which cannot be done in a compatible manner, a new format
+		version will be added. So this is a mechanism for possible
+		future backward-compatible (but forward-incompatible)
+		improvements.
+
+What:		/sys/class/ubiX/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+		UBI devices (UBI device 0, 1, etc). They contain general UBI
+		device information and per UBI volume information (each UBI
+		device may have many UBI volumes)
+
+What:		/sys/class/ubi/ubiX/avail_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Amount of available logical eraseblock. For example, one may
+		create a new UBI volume which has this amount of logical
+		eraseblocks.
+
+What:		/sys/class/ubi/ubiX/bad_peb_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of bad physical eraseblocks on the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/bgt_enabled
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI background thread is disabled,
+		and ASCII "1\n" if it is enabled.
+
+What:		/sys/class/ubi/ubiX/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI device (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/eraseblock_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum logical eraseblock size this UBI device may provide. UBI
+		volumes may have smaller logical eraseblock size because of their
+		alignment.
+
+What:		/sys/class/ubi/ubiX/max_ec
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum physical eraseblock erase counter value.
+
+What:		/sys/class/ubi/ubiX/max_vol_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum number of volumes which this UBI device may have.
+
+What:		/sys/class/ubi/ubiX/min_io_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Minimum input/output unit size. All the I/O may only be done
+		in fractions of the contained number.
+
+What:		/sys/class/ubi/ubiX/mtd_num
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/reserved_for_bad
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of physical eraseblocks reserved for bad block handling.
+
+What:		/sys/class/ubi/ubiX/total_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Total number of good (not marked as bad) physical eraseblocks on
+		the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/volumes_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of volumes on this UBI device.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+		etc directories describe UBI volumes on UBI device X (volumes
+		0, 1, etc).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/alignment
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume alignment - the value the logical eraseblock size of
+		this volume has to be aligned on. For example, 2048 means that
+		logical eraseblock size is multiple of 2048. In other words,
+		volume logical eraseblock size is UBI device logical eraseblock
+		size aligned to the alignment value.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+		if it is corrupted (e.g., due to an interrupted volume update).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The amount of data this volume contains. This value makes sense
+		only for static volumes, and for dynamic volume it equivalent
+		to the total volume size in bytes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI volume (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/name
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume name.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of physical eraseblock reserved for this volume.
+		Equivalent to the volume size in logical eraseblocks.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/type
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+		"static\n" for static volumes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the update marker is not set for this
+		volume, and "1\n" if it is set. The update marker is set when
+		volume update starts, and cleaned when it ends. So the presence
+		of the update marker indicates that the volume is being updated
+		at the moment of the update was interrupted. The later may be
+		checked using the "corrupted" sysfs file.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Logical eraseblock size of this volume. Equivalent to logical
+		eraseblock size of the device aligned on the volume alignment
+		value.

linux-imx/Documentation/ABI/stable/sysfs-devices-node

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-devices-node b/linux-imx/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 0000000..ce259c1
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,101 @@
+What:		/sys/devices/system/node/possible
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that could be possibly become online at some point.
+
+What:		/sys/devices/system/node/online
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that are online.
+
+What:		/sys/devices/system/node/has_normal_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular memory.
+
+What:		/sys/devices/system/node/has_cpu
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have one or more CPUs.
+
+What:		/sys/devices/system/node/has_high_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular or high memory.
+		Depends on CONFIG_HIGHMEM.
+
+What:		/sys/devices/system/node/nodeX
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, this is a directory containing
+		information on node X such as what CPUs are local to the
+		node. Each file is detailed next.
+
+What:		/sys/devices/system/node/nodeX/cpumap
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's cpumap.
+
+What:		/sys/devices/system/node/nodeX/cpulist
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The CPUs associated to the node.
+
+What:		/sys/devices/system/node/nodeX/meminfo
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Provides information about the node's distribution and memory
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+
+What:		/sys/devices/system/node/nodeX/numastat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's hit/miss statistics, in units of pages.
+		See Documentation/numastat.txt
+
+What:		/sys/devices/system/node/nodeX/distance
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Distance between the node and all the other nodes
+		in the system.
+
+What:		/sys/devices/system/node/nodeX/vmstat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's zoned virtual memory statistics.
+		This is a superset of numastat.
+
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
+
+What:		/sys/devices/system/node/nodeX/scan_unevictable_pages
+Date:		October 2008
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		When set, it triggers scanning the node's unevictable lists
+		and move any pages that have become evictable onto the respective
+		zone's inactive list. See mm/vmscan.c
+
+What:		/sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date:		December 2009
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		The node's huge page size control/query attributes.
+		See Documentation/vm/hugetlbpage.txt
\ No newline at end of file

linux-imx/Documentation/ABI/stable/sysfs-devices-system-xen_memory

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/linux-imx/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 0000000..caa311d
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,77 @@
+What:		/sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The maximum number of times the balloon driver will
+		attempt to increase the balloon before giving up.  See
+		also 'retry_count' below.
+		A value of zero means retry forever and is the default one.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The limit that 'schedule_delay' (see below) will be
+		increased to. The default value is 32 seconds.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The current number of times that the balloon driver
+		has attempted to increase the size of the balloon.
+		The default value is one. With max_retry_count being
+		zero (unlimited), this means that the driver will attempt
+		to retry with a 'schedule_delay' delay.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The time (in seconds) to wait between attempts to
+		increase the balloon.  Each time the balloon cannot be
+		increased, 'schedule_delay' is increased (until
+		'max_schedule_delay' is reached at which point it
+		will use the max value).
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The target number of pages to adjust this domain's
+		memory reservation to.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		As target above, except the value is in KiB.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Current size (in KiB) of this domain's memory
+		reservation.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of high memory in the balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of low (or normal) memory in the
+		balloon.

linux-imx/Documentation/ABI/stable/sysfs-driver-ib_srp

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-driver-ib_srp b/linux-imx/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 0000000..481aae9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,156 @@
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	Interface for making ib_srp connect to a new target.
+		One can request ib_srp to connect to a new target by writing
+		a comma-separated list of login parameters to this sysfs
+		attribute. The supported parameters are:
+		* id_ext, a 16-digit hexadecimal number specifying the eight
+		  byte identifier extension in the 16-byte SRP target port
+		  identifier. The target port identifier is sent by ib_srp
+		  to the target in the SRP_LOGIN_REQ request.
+		* ioc_guid, a 16-digit hexadecimal number specifying the eight
+		  byte I/O controller GUID portion of the 16-byte target port
+		  identifier.
+		* dgid, a 32-digit hexadecimal number specifying the
+		  destination GID.
+		* pkey, a four-digit hexadecimal number specifying the
+		  InfiniBand partition key.
+		* service_id, a 16-digit hexadecimal number specifying the
+		  InfiniBand service ID used to establish communication with
+		  the SRP target. How to find out the value of the service ID
+		  is specified in the documentation of the SRP target.
+		* max_sect, a decimal number specifying the maximum number of
+		  512-byte sectors to be transferred via a single SCSI command.
+		* max_cmd_per_lun, a decimal number specifying the maximum
+		  number of outstanding commands for a single LUN.
+		* io_class, a hexadecimal number specifying the SRP I/O class.
+		  Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+		  class defines the format of the SRP initiator and target
+		  port identifiers.
+		* initiator_ext, a 16-digit hexadecimal number specifying the
+		  identifier extension portion of the SRP initiator port
+		  identifier. This data is sent by the initiator to the target
+		  in the SRP_LOGIN_REQ request.
+		* cmd_sg_entries, a number in the range 1..255 that specifies
+		  the maximum number of data buffer descriptors stored in the
+		  SRP_CMD information unit itself. With allow_ext_sg=0 the
+		  parameter cmd_sg_entries defines the maximum S/G list length
+		  for a single SRP_CMD, and commands whose S/G list length
+		  exceeds this limit after S/G list collapsing will fail.
+		* allow_ext_sg, whether ib_srp is allowed to include a partial
+		  memory descriptor list in an SRP_CMD instead of the entire
+		  list. If a partial memory descriptor list has been included
+		  in an SRP_CMD the remaining memory descriptors are
+		  communicated from initiator to target via an additional RDMA
+		  transfer. Setting allow_ext_sg to 1 increases the maximum
+		  amount of data that can be transferred between initiator and
+		  target via a single SCSI command. Since not all SRP target
+		  implementations support partial memory descriptor lists the
+		  default value for this option is 0.
+		* sg_tablesize, a number in the range 1..2048 specifying the
+		  maximum S/G list length the SCSI layer is allowed to pass to
+		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
+		  only safe with partial memory descriptor list support enabled
+		  (allow_ext_sg=1).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA name (<hca>).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA port number (<port_number>).
+
+What:		/sys/class/scsi_host/host<n>/allow_ext_sg
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Whether ib_srp is allowed to include a partial memory
+		descriptor list in an SRP_CMD when communicating with an SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Maximum number of data buffer descriptors that may be sent to
+		the target in a single SRP_CMD request.
+
+What:		/sys/class/scsi_host/host<n>/dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID used for communication with the SRP
+		target. Differs from orig_dgid if port redirection has happened.
+
+What:		/sys/class/scsi_host/host<n>/id_ext
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte identifier extension portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/ioc_guid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte I/O controller GUID portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_device
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Name of the InfiniBand HCA used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_port
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of the HCA port used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/orig_dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID specified in the parameters
+		written to the add_target sysfs attribute.
+
+What:		/sys/class/scsi_host/host<n>/pkey
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	A 16-bit number representing the InfiniBand partition key used
+		for communication with the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/req_lim
+Date:		October 20, 2010
+KernelVersion:	2.6.36
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of requests ib_srp can send to the target before it has
+		to wait for more credits. For more information see also the
+		SRP credit algorithm in the SRP specification.
+
+What:		/sys/class/scsi_host/host<n>/service_id
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand service ID used for establishing communication with
+		the SRP	target.
+
+What:		/sys/class/scsi_host/host<n>/zero_req_lim
+Date:		September 20, 2006
+KernelVersion:	2.6.18
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of times the initiator had to wait before sending a
+		request to the target because it ran out of credits. For more
+		information see also the SRP credit algorithm in the SRP
+		specification.

linux-imx/Documentation/ABI/stable/sysfs-driver-qla2xxx

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-driver-qla2xxx b/linux-imx/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 0000000..9a59d84
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date:		September 2009
+Contact:	QLogic Linux Driver <linux-driver@qlogic.com>
+Description:	qla2xxx-udev.sh currently looks for uevent CHANGE events to
+		signal a firmware-dump has been generated by the driver and is
+		ready for retrieval.
+Users:		qla2xxx-udev.sh.  Proposed changes should be mailed to
+		linux-driver@qlogic.com

linux-imx/Documentation/ABI/stable/sysfs-driver-usb-usbtmc

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/linux-imx/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
new file mode 100644
index 0000000..e960cd0
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -0,0 +1,62 @@
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file is the TermChar value to be sent to the USB TMC
+		device as described by the document, "Universal Serial Bus Test
+		and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
+
+		Note that the TermCharEnabled file determines if this value is
+		sent to the device or not.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file determines if the TermChar is to be sent to the
+		device on every transaction or not.  For more details about
+		this, please see the document, "Universal Serial Bus Test and
+		Measurement Class Specification (USBTMC) Revision 1.0" as
+		published by the USB-IF.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This file determines if the transaction of the USB TMC
+		device is to be automatically aborted if there is any error.
+		For more details about this, please see the document,
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.

linux-imx/Documentation/ABI/stable/sysfs-driver-w1_ds28e04

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/linux-imx/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 0000000..26579ee
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100

linux-imx/Documentation/ABI/stable/sysfs-firmware-efi-vars

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-firmware-efi-vars b/linux-imx/Documentation/ABI/stable/sysfs-firmware-efi-vars
new file mode 100644
index 0000000..5def20b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -0,0 +1,75 @@
+What:		/sys/firmware/efi/vars
+Date:		April 2004
+Contact:	Matt Domsch <Matt_Domsch@dell.com>
+Description:
+		This directory exposes interfaces for interactive with
+		EFI variables.  For more information on EFI variables,
+		see 'Variable Services' in the UEFI specification
+		(section 7.2 in specification version 2.3 Errata D).
+
+		In summary, EFI variables are named, and are classified
+		into separate namespaces through the use of a vendor
+		GUID.  They also have an arbitrary binary value
+		associated with them.
+
+		The efivars module enumerates these variables and
+		creates a separate directory for each one found.  Each
+		directory has a name of the form "<key>-<vendor guid>"
+		and contains the following files:
+
+		attributes:	A read-only text file enumerating the
+				EFI variable flags.  Potential values
+				include:
+
+				EFI_VARIABLE_NON_VOLATILE
+				EFI_VARIABLE_BOOTSERVICE_ACCESS
+				EFI_VARIABLE_RUNTIME_ACCESS
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+				See the EFI documentation for an
+				explanation of each of these variables.
+
+		data:		A read-only binary file that can be read
+				to attain the value of the EFI variable
+
+		guid:		The vendor GUID of the variable.  This
+				should always match the GUID in the
+				variable's name.
+
+		raw_var:	A binary file that can be read to obtain
+				a structure that contains everything
+				there is to know about the variable.
+				For structure definition see "struct
+				efi_variable" in the kernel sources.
+
+				This file can also be written to in
+				order to update the value of a variable.
+				For this to work however, all fields of
+				the "struct efi_variable" passed must
+				match byte for byte with the structure
+				read out of the file, save for the value
+				portion.
+
+				**Note** the efi_variable structure
+				read/written with this file contains a
+				'long' type that may change widths
+				depending on your underlying
+				architecture.
+
+		size:		As ASCII representation of the size of
+				the variable's value.
+
+
+		In addition, two other magic binary files are provided
+		in the top-level directory and are used for adding and
+		removing variables:
+
+		new_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to create a
+				new variable.
+
+		del_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to remove any
+				variable that has a matching vendor GUID
+				and variable key name.

linux-imx/Documentation/ABI/stable/sysfs-module

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-module b/linux-imx/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 0000000..a0dd21c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,30 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will show up either if the module is built
+		directly into the kernel, or if it is loaded as a
+		dynamic module.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.

linux-imx/Documentation/ABI/stable/sysfs-transport-srp

diff --git a/linux-imx/Documentation/ABI/stable/sysfs-transport-srp b/linux-imx/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 0000000..b36fb0d
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,19 @@
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date:		June 1, 2012
+KernelVersion:	3.7
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Instructs an SRP initiator to disconnect from a target and to
+		remove all LUNs imported from that target.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	16-byte local SRP port identifier in hexadecimal format. An
+		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".

linux-imx/Documentation/ABI/stable/thermal-notification

diff --git a/linux-imx/Documentation/ABI/stable/thermal-notification b/linux-imx/Documentation/ABI/stable/thermal-notification
new file mode 100644
index 0000000..9723e8b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/thermal-notification
@@ -0,0 +1,4 @@
+What:		A notification mechanism for thermal related events
+Description:
+	This interface enables notification for thermal related events.
+	The notification is in the form of a netlink event.

linux-imx/Documentation/ABI/stable/vdso

diff --git a/linux-imx/Documentation/ABI/stable/vdso b/linux-imx/Documentation/ABI/stable/vdso
new file mode 100644
index 0000000..7cdfc28
--- /dev/null
+++ b/linux-imx/Documentation/ABI/stable/vdso
@@ -0,0 +1,27 @@
+On some architectures, when the kernel loads any userspace program it
+maps an ELF DSO into that program's address space.  This DSO is called
+the vDSO and it often contains useful and highly-optimized alternatives
+to real syscalls.
+
+These functions are called just like ordinary C function according to
+your platform's ABI.  Call them from a sensible context.  (For example,
+if you set CS on x86 to something strange, the vDSO functions are
+within their rights to crash.)  In addition, if you pass a bad
+pointer to a vDSO function, you might get SIGSEGV instead of -EFAULT.
+
+To find the DSO, parse the auxiliary vector passed to the program's
+entry point.  The AT_SYSINFO_EHDR entry will point to the vDSO.
+
+The vDSO uses symbol versioning; whenever you request a symbol from the
+vDSO, specify the version you are expecting.
+
+Programs that dynamically link to glibc will use the vDSO automatically.
+Otherwise, you can use the reference parser in Documentation/vDSO/parse_vdso.c.
+
+Unless otherwise noted, the set of symbols with any given version and the
+ABI of those symbols is considered stable.  It may vary across architectures,
+though.
+
+(As of this writing, this ABI documentation as been confirmed for x86_64.
+ The maintainers of the other vDSO-using architectures should confirm
+ that it is correct for their architecture.)

linux-imx/Documentation/ABI/testing/configfs-spear-pcie-gadget

diff --git a/linux-imx/Documentation/ABI/testing/configfs-spear-pcie-gadget b/linux-imx/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..8759881
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,31 @@
+What:		/config/pcie-gadget
+Date:		Feb 2011
+KernelVersion:	2.6.37
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+
+	Interface is used to configure selected dual mode PCIe controller
+	as device and then program its various registers to configure it
+	as a particular device type.
+	This interfaces can be used to show spear's PCIe device capability.
+
+	Nodes are only visible when configfs is mounted. To mount configfs
+	in /config directory use:
+	# mount -t configfs none /config/
+
+	For nth PCIe Device Controller
+	/config/pcie-gadget.n/
+		link ... used to enable ltssm and read its status.
+		int_type ...used to configure and read type of supported
+			interrupt
+		no_of_msi ... used to configure number of MSI vector needed and
+			to read no of MSI granted.
+		inta ... write 1 to assert INTA and 0 to de-assert.
+		send_msi ... write MSI vector to be sent.
+		vendor_id ... used to write and read vendor id (hex)
+		device_id ... used to write and read device id (hex)
+		bar0_size ... used to write and read bar0_size
+		bar0_address ... used to write and read bar0 mapped area in hex.
+		bar0_rw_offset ... used to write and read offset of bar0 where
+			bar0_data will be written or read.
+		bar0_data ... used to write and read data at bar0_rw_offset.

linux-imx/Documentation/ABI/testing/debugfs-ec

diff --git a/linux-imx/Documentation/ABI/testing/debugfs-ec b/linux-imx/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 0000000..6546115
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.

linux-imx/Documentation/ABI/testing/debugfs-ideapad

diff --git a/linux-imx/Documentation/ABI/testing/debugfs-ideapad b/linux-imx/Documentation/ABI/testing/debugfs-ideapad
new file mode 100644
index 0000000..7079c0b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/debugfs-ideapad
@@ -0,0 +1,19 @@
+What:		/sys/kernel/debug/ideapad/cfg
+Date:		Sep 2011
+KernelVersion:	3.2
+Contact:	Ike Panhc <ike.pan@canonical.com>
+Description:
+
+cfg shows the return value of _CFG method in VPC2004 device. It tells machine
+capability and what graphic component within the machine.
+
+
+What:		/sys/kernel/debug/ideapad/status
+Date:		Sep 2011
+KernelVersion:	3.2
+Contact:	Ike Panhc <ike.pan@canonical.com>
+Description:
+
+status shows infos we can read and tells its meaning and value.
+
+

linux-imx/Documentation/ABI/testing/debugfs-olpc

diff --git a/linux-imx/Documentation/ABI/testing/debugfs-olpc b/linux-imx/Documentation/ABI/testing/debugfs-olpc
new file mode 100644
index 0000000..bd76cc6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/debugfs-olpc
@@ -0,0 +1,16 @@
+What:		/sys/kernel/debug/olpc-ec/cmd
+Date:		Dec 2011
+KernelVersion:	3.4
+Contact:	devel@lists.laptop.org
+Description:
+
+A generic interface for executing OLPC Embedded Controller commands and
+reading their responses.
+
+To execute a command, write data with the format: CC:N A A A A
+CC is the (hex) command, N is the count of expected reply bytes, and A A A A
+are optional (hex) arguments.
+
+To read the response (if any), read from the generic node after executing
+a command. Hex reply bytes will be returned, *whether or not* they came from
+the immediately previous command.

linux-imx/Documentation/ABI/testing/debugfs-pfo-nx-crypto

diff --git a/linux-imx/Documentation/ABI/testing/debugfs-pfo-nx-crypto b/linux-imx/Documentation/ABI/testing/debugfs-pfo-nx-crypto
new file mode 100644
index 0000000..685d5a4
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/debugfs-pfo-nx-crypto
@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/nx-crypto/*
+Date:		March 2012
+KernelVersion:	3.4
+Contact:	Kent Yoder <key@linux.vnet.ibm.com>
+Description:
+
+  These debugfs interfaces are built by the nx-crypto driver, built in
+arch/powerpc/crypto/nx.
+
+Error Detection
+===============
+
+errors:
+- A u32 providing a total count of errors since the driver was loaded. The
+only errors counted here are those returned from the hcall, H_COP_OP.
+
+last_error:
+- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+recorded here (the hcall will retry until -EBUSY goes away).
+
+last_error_pid:
+- The process ID of the process who received the most recent error from the
+hcall.
+
+Device Use
+==========
+
+aes_bytes:
+- The total number of bytes encrypted using AES in any of the driver's
+supported modes.
+
+aes_ops:
+- The total number of AES operations submitted to the hardware.
+
+sha256_bytes:
+- The total number of bytes hashed by the hardware using SHA-256.
+
+sha256_ops:
+- The total number of SHA-256 operations submitted to the hardware.
+
+sha512_bytes:
+- The total number of bytes hashed by the hardware using SHA-512.
+
+sha512_ops:
+- The total number of SHA-512 operations submitted to the hardware.

linux-imx/Documentation/ABI/testing/debugfs-pktcdvd

diff --git a/linux-imx/Documentation/ABI/testing/debugfs-pktcdvd b/linux-imx/Documentation/ABI/testing/debugfs-pktcdvd
new file mode 100644
index 0000000..cf11736
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/debugfs-pktcdvd
@@ -0,0 +1,19 @@
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
+Date:           Oct. 2006
+KernelVersion:  2.6.20
+Contact:        Thomas Maier <balagi@justmail.de>
+Description:
+
+debugfs interface
+-----------------
+
+The pktcdvd module (packet writing driver) creates
+these files in debugfs:
+
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
+    info            (0444) Lots of driver statistics and infos.
+
+Example:
+-------
+
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

linux-imx/Documentation/ABI/testing/dev-kmsg

diff --git a/linux-imx/Documentation/ABI/testing/dev-kmsg b/linux-imx/Documentation/ABI/testing/dev-kmsg
new file mode 100644
index 0000000..bb820be
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/dev-kmsg
@@ -0,0 +1,101 @@
+What:		/dev/kmsg
+Date:		Mai 2012
+KernelVersion:	3.5
+Contact:	Kay Sievers <kay@vrfy.org>
+Description:	The /dev/kmsg character device node provides userspace access
+		to the kernel's printk buffer.
+
+		Injecting messages:
+		Every write() to the opened device node places a log entry in
+		the kernel's printk buffer.
+
+		The logged line can be prefixed with a <N> syslog prefix, which
+		carries the syslog priority and facility. The single decimal
+		prefix number is composed of the 3 lowest bits being the syslog
+		priority and the higher bits the syslog facility number.
+
+		If no prefix is given, the priority number is the default kernel
+		log priority and the facility number is set to LOG_USER (1). It
+		is not possible to inject messages from userspace with the
+		facility number LOG_KERN (0), to make sure that the origin of
+		the messages can always be reliably determined.
+
+		Accessing the buffer:
+		Every read() from the opened device node receives one record
+		of the kernel's printk buffer.
+
+		The first read() directly following an open() always returns
+		first message in the buffer; there is no kernel-internal
+		persistent state; many readers can concurrently open the device
+		and read from it, without affecting other readers.
+
+		Every read() will receive the next available record. If no more
+		records are available read() will block, or if O_NONBLOCK is
+		used -EAGAIN returned.
+
+		Messages in the record ring buffer get overwritten as whole,
+		there are never partial messages received by read().
+
+		In case messages get overwritten in the circular buffer while
+		the device is kept open, the next read() will return -EPIPE,
+		and the seek position be updated to the next available record.
+		Subsequent reads() will return available records again.
+
+		Unlike the classic syslog() interface, the 64 bit record
+		sequence numbers allow to calculate the amount of lost
+		messages, in case the buffer gets overwritten. And they allow
+		to reconnect to the buffer and reconstruct the read position
+		if needed, without limiting the interface to a single reader.
+
+		The device supports seek with the following parameters:
+		SEEK_SET, 0
+		  seek to the first entry in the buffer
+		SEEK_END, 0
+		  seek after the last entry in the buffer
+		SEEK_DATA, 0
+		  seek after the last record available at the time
+		  the last SYSLOG_ACTION_CLEAR was issued.
+
+		The output format consists of a prefix carrying the syslog
+		prefix including priority and facility, the 64 bit message
+		sequence number and the monotonic timestamp in microseconds,
+		and a flag field. All fields are separated by a ','.
+
+		Future extensions might add more comma separated values before
+		the terminating ';'. Unknown fields and values should be
+		gracefully ignored.
+
+		The human readable text string starts directly after the ';'
+		and is terminated by a '\n'. Untrusted values derived from
+		hardware or other facilities are printed, therefore
+		all non-printable characters and '\' itself in the log message
+		are escaped by "\x00" C-style hex encoding.
+
+		A line starting with ' ', is a continuation line, adding
+		key/value pairs to the log message, which provide the machine
+		readable context of the message, for reliable processing in
+		userspace.
+
+		Example:
+		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		 SUBSYSTEM=acpi
+		 DEVICE=+acpi:PNP0A03:00
+		6,339,5140900,-;NET: Registered protocol family 10
+		30,340,5690716,-;udevd[80]: starting version 181
+
+		The DEVICE= key uniquely identifies devices the following way:
+		  b12:8        - block dev_t
+		  c127:3       - char dev_t
+		  n8           - netdev ifindex
+		  +sound:card0 - subsystem:devname
+
+		The flags field carries '-' by default. A 'c' indicates a
+		fragment of a line. All following fragments are flagged with
+		'+'. Note, that these hints about continuation lines are not
+		necessarily correct, and the stream could be interleaved with
+		unrelated messages, but merging the lines in the output
+		usually produces better human readable results. A similar
+		logic is used internally when messages are printed to the
+		console, /proc/kmsg or the syslog() syscall.
+
+Users:		dmesg(1), userspace kernel log consumers

linux-imx/Documentation/ABI/testing/evm

diff --git a/linux-imx/Documentation/ABI/testing/evm b/linux-imx/Documentation/ABI/testing/evm
new file mode 100644
index 0000000..8374d45
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/evm
@@ -0,0 +1,23 @@
+What:		security/evm
+Date:		March 2011
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		EVM protects a file's security extended attributes(xattrs)
+		against integrity attacks. The initial method maintains an
+		HMAC-sha1 value across the extended attributes, storing the
+		value as the extended attribute 'security.evm'.
+
+		EVM depends on the Kernel Key Retention System to provide it
+		with a trusted/encrypted key for the HMAC-sha1 operation.
+		The key is loaded onto the root's keyring using keyctl.  Until
+		EVM receives notification that the key has been successfully
+		loaded onto the keyring (echo 1 > <securityfs>/evm), EVM
+		can not create or validate the 'security.evm' xattr, but
+		returns INTEGRITY_UNKNOWN.  Loading the key and signaling EVM
+		should be done as early as possible.  Normally this is done
+		in the initramfs, which has already been measured as part
+		of the trusted boot.  For more information on creating and
+		loading existing trusted/encrypted keys, refer to:
+		Documentation/keys-trusted-encrypted.txt.  (A sample dracut
+		patch, which loads the trusted/encrypted key and enables
+		EVM, is available from http://linux-ima.sourceforge.net/#EVM.)

linux-imx/Documentation/ABI/testing/ima_policy

diff --git a/linux-imx/Documentation/ABI/testing/ima_policy b/linux-imx/Documentation/ABI/testing/ima_policy
new file mode 100644
index 0000000..f1c5cc9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/ima_policy
@@ -0,0 +1,83 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure | appraise | dont_appraise | audit
+		condition:= base | lsm  [option]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
+				 [fowner]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+			option:	[[appraise_type=]]
+
+		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
+			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			fsmagic:= hex value
+			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
+			uid:= decimal value
+			fowner:=decimal value
+		lsm:  	are LSM specific
+		option:	appraise_type:= [imasig]
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_measure fsmagic=0x858458f6
+			dont_appraise fsmagic=0x858458f6
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=MODULE_CHECK uid=0
+			appraise fowner=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+
+			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

linux-imx/Documentation/ABI/testing/procfs-diskstats

diff --git a/linux-imx/Documentation/ABI/testing/procfs-diskstats b/linux-imx/Documentation/ABI/testing/procfs-diskstats
new file mode 100644
index 0000000..f91a973
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/procfs-diskstats
@@ -0,0 +1,22 @@
+What:		/proc/diskstats
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /proc/diskstats file displays the I/O statistics
+		of block devices. Each line contains the following 14
+		fields:
+		 1 - major number
+		 2 - minor mumber
+		 3 - device name
+		 4 - reads completed successfully
+		 5 - reads merged
+		 6 - sectors read
+		 7 - time spent reading (ms)
+		 8 - writes completed
+		 9 - writes merged
+		10 - sectors written
+		11 - time spent writing (ms)
+		12 - I/Os currently in progress
+		13 - time spent doing I/Os (ms)
+		14 - weighted time spent doing I/Os (ms)
+		For more details refer to Documentation/iostats.txt

linux-imx/Documentation/ABI/testing/pstore

diff --git a/linux-imx/Documentation/ABI/testing/pstore b/linux-imx/Documentation/ABI/testing/pstore
new file mode 100644
index 0000000..5fca9f5
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/pstore
@@ -0,0 +1,47 @@
+Where:		/sys/fs/pstore/... (or /dev/pstore/...)
+Date:		March 2011
+Kernel Version: 2.6.39
+Contact:	tony.luck@intel.com
+Description:	Generic interface to platform dependent persistent storage.
+
+		Platforms that provide a mechanism to preserve some data
+		across system reboots can register with this driver to
+		provide a generic interface to show records captured in
+		the dying moments.  In the case of a panic the last part
+		of the console log is captured, but other interesting
+		data can also be saved.
+
+		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
+
+		$ ls -l /sys/fs/pstore/
+		total 0
+		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
+
+		Different users of this interface will result in different
+		filename prefixes.  Currently two are defined:
+
+		"dmesg"	- saved console log
+		"mce"	- architecture dependent data from fatal h/w error
+
+		Once the information in a file has been read, removing
+		the file will signal to the underlying persistent storage
+		device that it can reclaim the space for later re-use.
+
+		$ rm /sys/fs/pstore/dmesg-erst-1
+
+		The expectation is that all files in /sys/fs/pstore/
+		will be saved elsewhere and erased from persistent store
+		soon after boot to free up space ready for the next
+		catastrophe.
+
+		The 'kmsg_bytes' mount option changes the target amount of
+		data saved on each oops/panic. Pstore saves (possibly
+		multiple) files based on the record size of the underlying
+		persistent storage until at least this amount is reached.
+		Default is 10 Kbytes.
+
+		Pstore only supports one backend at a time. If multiple
+		backends are available, the preferred backend may be
+		set by passing the pstore.backend= argument to the kernel at
+		boot time.
+

linux-imx/Documentation/ABI/testing/sysfs-ata

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-ata b/linux-imx/Documentation/ABI/testing/sysfs-ata
new file mode 100644
index 0000000..0a93215
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-ata
@@ -0,0 +1,99 @@
+What:		/sys/class/ata_...
+Date:		August 2008
+Contact:	Gwendal Grignou<gwendal@google.com>
+Description:
+
+Provide a place in sysfs for storing the ATA topology of the system.  This allows
+retrieving various information about ATA objects.
+
+Files under /sys/class/ata_port
+-------------------------------
+
+	For each port, a directory ataX is created where X is the ata_port_id of
+	the port. The device parent is the ata host device.
+
+idle_irq (read)
+
+	Number of IRQ received by the port while idle [some ata HBA only].
+
+nr_pmp_links (read)
+
+	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+Files under /sys/class/ata_link
+-------------------------------
+
+	Behind each port, there is a ata_link. If there is a SATA PM in the
+	topology, 15 ata_link objects are created.
+
+	If a link is behind a port, the directory name is linkX, where X is
+	ata_port_id of the port.
+	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
+	of the parent port and Y the PM port.
+
+hw_sata_spd_limit
+
+	Maximum speed supported by the connected SATA device.
+
+sata_spd_limit
+
+	Maximum speed imposed by libata.
+
+sata_spd
+
+	Current speed of the link [1.5, 3Gps,...].
+
+Files under /sys/class/ata_device
+---------------------------------
+
+	Behind each link, up to two ata device are created.
+	The name of the directory is devX[.Y].Z where:
+	- X is ata_port_id of the port where the device is connected,
+	- Y the port of the PM if any, and
+	- Z the device id: for PATA, there is usually 2 devices [0,1],
+	only 1 for SATA.
+
+class
+	Device class. Can be "ata" for disk, "atapi" for packet device,
+	"pmp" for PM, or "none" if no device was found behind the link.
+
+dma_mode
+
+	Transfer modes supported by the device when in DMA mode.
+	Mostly used by PATA device.
+
+pio_mode
+
+	Transfer modes supported by the device when in PIO mode.
+	Mostly used by PATA device.
+
+xfer_mode
+
+	Current transfer mode.
+
+id
+
+	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
+	Only valid if the device is not a PM.
+
+gscr
+
+	Cached result of the dump of PM GSCR register.
+	Valid registers are:
+	0: 	SATA_PMP_GSCR_PROD_ID,
+	1: 	SATA_PMP_GSCR_REV,
+	2: 	SATA_PMP_GSCR_PORT_INFO,
+	32:	SATA_PMP_GSCR_ERROR,
+	33:	SATA_PMP_GSCR_ERROR_EN,
+	64:	SATA_PMP_GSCR_FEAT,
+	96:	SATA_PMP_GSCR_FEAT_EN,
+	130:	SATA_PMP_GSCR_SII_GPIO
+	Only valid if the device is a PM.
+
+spdn_cnt
+
+	Number of time libata decided to lower the speed of link due to errors.
+
+ering
+
+	Formatted output of the error ring of the device.

linux-imx/Documentation/ABI/testing/sysfs-block

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-block b/linux-imx/Documentation/ABI/testing/sysfs-block
new file mode 100644
index 0000000..279da08
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-block
@@ -0,0 +1,222 @@
+What:		/sys/block/<disk>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/stat files displays the I/O
+		statistics of disk <disk>. They contain 11 fields:
+		 1 - reads completed successfully
+		 2 - reads merged
+		 3 - sectors read
+		 4 - time spent reading (ms)
+		 5 - writes completed
+		 6 - writes merged
+		 7 - sectors written
+		 8 - time spent writing (ms)
+		 9 - I/Os currently in progress
+		10 - time spent doing I/Os (ms)
+		11 - weighted time spent doing I/Os (ms)
+		For more details refer Documentation/iostats.txt
+
+
+What:		/sys/block/<disk>/<part>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/<part>/stat files display the
+		I/O statistics of partition <part>. The format is the
+		same as the above-written /sys/block/<disk>/stat
+		format.
+
+
+What:		/sys/block/<disk>/integrity/format
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Metadata format for integrity capable block device.
+		E.g. T10-DIF-TYPE1-CRC.
+
+
+What:		/sys/block/<disk>/integrity/read_verify
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should verify the
+		integrity of read requests serviced by devices that
+		support sending integrity metadata.
+
+
+What:		/sys/block/<disk>/integrity/tag_size
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Number of bytes of integrity tag space available per
+		512 bytes of data.
+
+
+What:		/sys/block/<disk>/integrity/write_generate
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should automatically
+		generate checksums for write requests bound for
+		devices that support receiving integrity metadata.
+
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit the storage device can
+		address.  It is typically 512 bytes.
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical
+		block size but may be bigger.  One example is SATA
+		drives with 4KB sectors that expose a 512-byte logical
+		block size to the operating system.  For stacked block
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the
+		device can perform without incurring a performance
+		penalty.  For disk drives this is often the physical
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report an optimal I/O size, which is
+		the device's preferred unit for sustained I/O.  This is
+		rarely reported for disk drives.  For RAID arrays it is
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.
+
+What:		/sys/block/<disk>/queue/nomerges
+Date:		January 2010
+Contact:
+Description:
+		Standard I/O elevator operations include attempts to
+		merge contiguous I/Os. For known random I/O loads these
+		attempts will always fail and result in extra cycles
+		being spent in the kernel. This allows one to turn off
+		this behavior on one of two ways: When set to 1, complex
+		merge checks are disabled, but the simple one-shot merges
+		with the previous I/O request are enabled. When set to 2,
+		all merge tries are disabled. The default value is 0 -
+		which enables all types of merge tries.
+
+What:		/sys/block/<disk>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		device is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/<partition>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		partition is offset from the internal allocation unit's
+		natural alignment.
+
+What:		/sys/block/<disk>/queue/discard_granularity
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space using units that are bigger
+		than the logical block size. The discard_granularity
+		parameter indicates the size of the internal allocation
+		unit in bytes if reported by the device. Otherwise the
+		discard_granularity will be set to match the device's
+		physical block size. A discard_granularity of 0 means
+		that the device does not support discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_max_bytes
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may have
+		internal limits on the number of bytes that can be
+		trimmed or unmapped in a single operation. Some storage
+		protocols also have inherent limits on the number of
+		blocks that can be described in a single command. The
+		discard_max_bytes parameter is set by the device driver
+		to the maximum number of bytes that can be discarded in
+		a single operation. Discard requests issued to the
+		device must not exceed this limit. A discard_max_bytes
+		value of 0 means that the device does not support
+		discard functionality.
+
+What:		/sys/block/<disk>/queue/discard_zeroes_data
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may return
+		stale or random data when a previously discarded block
+		is read back. This can cause problems if the filesystem
+		expects discarded blocks to be explicitly cleared. If a
+		device reports that it deterministically returns zeroes
+		when a discarded area is read the discard_zeroes_data
+		parameter will be set to one. Otherwise it will be 0 and
+		the result of reading a discarded area is undefined.
+
+What:		/sys/block/<disk>/queue/write_same_max_bytes
+Date:		January 2012
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Some devices support a write same operation in which a
+		single data block can be written to a range of several
+		contiguous blocks on storage. This can be used to wipe
+		areas on disk or to initialize drives in a RAID
+		configuration. write_same_max_bytes indicates how many
+		bytes can be written in a single write same command. If
+		write_same_max_bytes is 0, write same is not supported
+		by the device.
+

linux-imx/Documentation/ABI/testing/sysfs-block-bcache

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-block-bcache b/linux-imx/Documentation/ABI/testing/sysfs-block-bcache
new file mode 100644
index 0000000..9e4bbc5
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-block-bcache
@@ -0,0 +1,156 @@
+What:		/sys/block/<disk>/bcache/unregister
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		A write to this file causes the backing device or cache to be
+		unregistered. If a backing device had dirty data in the cache,
+		writeback mode is automatically disabled and all dirty data is
+		flushed before the device is unregistered. Caches unregister
+		all associated backing devices before unregistering themselves.
+
+What:		/sys/block/<disk>/bcache/clear_stats
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Writing to this file resets all the statistics for the device.
+
+What:		/sys/block/<disk>/bcache/cache
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a backing device that has cache, a symlink to
+		the bcache/ dir of that cache.
+
+What:		/sys/block/<disk>/bcache/cache_hits
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of full cache hits,
+		counted per bio. A partial cache hit counts as a miss.
+
+What:		/sys/block/<disk>/bcache/cache_misses
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: integer number of cache misses.
+
+What:		/sys/block/<disk>/bcache/cache_hit_ratio
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: cache hits as a percentage.
+
+What:		/sys/block/<disk>/bcache/sequential_cutoff
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: Threshold past which sequential IO will
+		skip the cache. Read and written as bytes in human readable
+		units (i.e. echo 10M > sequntial_cutoff).
+
+What:		/sys/block/<disk>/bcache/bypassed
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Sum of all reads and writes that have bypassed the cache (due
+		to the sequential cutoff).  Expressed as bytes in human
+		readable units.
+
+What:		/sys/block/<disk>/bcache/writeback
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: When on, writeback caching is enabled and
+		writes will be buffered in the cache. When off, caching is in
+		writethrough mode; reads and writes will be added to the
+		cache but no write buffering will take place.
+
+What:		/sys/block/<disk>/bcache/writeback_running
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: when off, dirty data will not be written
+		from the cache to the backing device. The cache will still be
+		used to buffer writes until it is mostly full, at which point
+		writes transparently revert to writethrough mode. Intended only
+		for benchmarking/testing.
+
+What:		/sys/block/<disk>/bcache/writeback_delay
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: In writeback mode, when dirty data is
+		written to the cache and the cache held no dirty data for that
+		backing device, writeback from cache to backing device starts
+		after this delay, expressed as an integer number of seconds.
+
+What:		/sys/block/<disk>/bcache/writeback_percent
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For backing devices: If nonzero, writeback from cache to
+		backing device only takes place when more than this percentage
+		of the cache is used, allowing more write coalescing to take
+		place and reducing total number of writes sent to the backing
+		device. Integer between 0 and 40.
+
+What:		/sys/block/<disk>/bcache/synchronous
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean that allows synchronous mode to be
+		switched on and off. In synchronous mode all writes are ordered
+		such that the cache can reliably recover from unclean shutdown;
+		if disabled bcache will not generally wait for writes to
+		complete but if the cache is not shut down cleanly all data
+		will be discarded from the cache. Should not be turned off with
+		writeback caching enabled.
+
+What:		/sys/block/<disk>/bcache/discard
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, a boolean allowing discard/TRIM to be turned off
+		or back on if the device supports it.
+
+What:		/sys/block/<disk>/bcache/bucket_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, bucket size in human readable units, as set at
+		cache creation time; should match the erase block size of the
+		SSD for optimal performance.
+
+What:		/sys/block/<disk>/bcache/nbuckets
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, the number of usable buckets.
+
+What:		/sys/block/<disk>/bcache/tree_depth
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, height of the btree excluding leaf nodes (i.e. a
+		one node tree will have a depth of 0).
+
+What:		/sys/block/<disk>/bcache/btree_cache_size
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		Number of btree buckets/nodes that are currently cached in
+		memory; cache dynamically grows and shrinks in response to
+		memory pressure from the rest of the system.
+
+What:		/sys/block/<disk>/bcache/written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, total amount of data in human readable units
+		written to the cache, excluding all metadata.
+
+What:		/sys/block/<disk>/bcache/btree_written
+Date:		November 2010
+Contact:	Kent Overstreet <kent.overstreet@gmail.com>
+Description:
+		For a cache, sum of all btree writes in human readable units.

linux-imx/Documentation/ABI/testing/sysfs-block-dm

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-block-dm b/linux-imx/Documentation/ABI/testing/sysfs-block-dm
new file mode 100644
index 0000000..87ca569
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-block-dm
@@ -0,0 +1,25 @@
+What:		/sys/block/dm-<num>/dm/name
+Date:		January 2009
+KernelVersion:	2.6.29
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device name.
+		Read-only string containing mapped device name.
+Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/uuid
+Date:		January 2009
+KernelVersion:	2.6.29
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device UUID.
+		Read-only string containing DM-UUID or empty string
+		if DM-UUID is not set.
+Users:		util-linux, device-mapper udev rules
+
+What:		/sys/block/dm-<num>/dm/suspended
+Date:		June 2009
+KernelVersion:	2.6.31
+Contact:	dm-devel@redhat.com
+Description:	Device-mapper device suspend state.
+		Contains the value 1 while the device is suspended.
+		Otherwise it contains 0. Read-only attribute.
+Users:		util-linux, device-mapper udev rules

linux-imx/Documentation/ABI/testing/sysfs-block-rssd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-block-rssd b/linux-imx/Documentation/ABI/testing/sysfs-block-rssd
new file mode 100644
index 0000000..beef30c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-block-rssd
@@ -0,0 +1,5 @@
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Indicates the status of the device.

linux-imx/Documentation/ABI/testing/sysfs-block-zram

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-block-zram b/linux-imx/Documentation/ABI/testing/sysfs-block-zram
new file mode 100644
index 0000000..ec93fe3
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-block-zram
@@ -0,0 +1,99 @@
+What:		/sys/block/zram<id>/disksize
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is read-write and specifies the disk size
+		which represents the limit on the *uncompressed* worth of data
+		that can be stored in this disk.
+
+What:		/sys/block/zram<id>/initstate
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is read-only and shows the initialization
+		state of the device.
+
+What:		/sys/block/zram<id>/reset
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is write-only and allows resetting the
+		device. The reset operation frees all the memory assocaited
+		with this device.
+
+What:		/sys/block/zram<id>/num_reads
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The num_reads file is read-only and specifies the number of
+		reads (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/num_writes
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The num_writes file is read-only and specifies the number of
+		writes (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/invalid_io
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The invalid_io file is read-only and specifies the number of
+		non-page-size-aligned I/O requests issued to this device.
+
+What:		/sys/block/zram<id>/notify_free
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The notify_free file is read-only and specifies the number of
+		swap slot free notifications received by this device. These
+		notifications are send to a swap block device when a swap slot
+		is freed. This statistic is applicable only when this disk is
+		being used as a swap disk.
+
+What:		/sys/block/zram<id>/discard
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The discard file is read-only and specifies the number of
+		discard requests received by this device. These requests
+		provide information to block device regarding blocks which are
+		no longer used by filesystem.
+
+What:		/sys/block/zram<id>/zero_pages
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The zero_pages file is read-only and specifies number of zero
+		filled pages written to this disk. No memory is allocated for
+		such pages.
+
+What:		/sys/block/zram<id>/orig_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The orig_data_size file is read-only and specifies uncompressed
+		size of data stored in this disk. This excludes zero-filled
+		pages (zero_pages) since no memory is allocated for them.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/compr_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The compr_data_size file is read-only and specifies compressed
+		size of data stored in this disk. So, compression ratio can be
+		calculated using orig_data_size and this statistic.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/mem_used_total
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The mem_used_total file is read-only and specifies the amount
+		of memory, including allocator fragmentation and metadata
+		overhead, allocated for this disk. So, allocator space
+		efficiency can be calculated using compr_data_size and this
+		statistic.
+		Unit: bytes

linux-imx/Documentation/ABI/testing/sysfs-bus-bcma

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-bcma b/linux-imx/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..721b4ae
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.

linux-imx/Documentation/ABI/testing/sysfs-bus-css

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-css b/linux-imx/Documentation/ABI/testing/sysfs-bus-css
new file mode 100644
index 0000000..2979c40
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-css
@@ -0,0 +1,35 @@
+What:		/sys/bus/css/devices/.../type
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the subchannel type, as reported by the hardware.
+		This attribute is present for all subchannel types.
+
+What:		/sys/bus/css/devices/.../modalias
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the module alias as reported with uevents.
+		It is of the format css:t<type> and present for all
+		subchannel types.
+
+What:		/sys/bus/css/drivers/io_subchannel/.../chpids
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the ids of the channel paths used by this
+		subchannel, as reported by the channel subsystem
+		during subchannel recognition.
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
+
+What:		/sys/bus/css/drivers/io_subchannel/.../pimpampom
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the PIM/PAM/POM values, as reported by the
+		channel subsystem when last queried by the common I/O
+		layer (this implies that this attribute is not necessarily
+		in sync with the values current in the channel subsystem).
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL

linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-events

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
new file mode 100644
index 0000000..0adeb52
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -0,0 +1,62 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: 		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_BRU_FIN
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_BRU_MPRED
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description:	POWER-systems specific performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by the POWER CPU. These events can be monitored
+		using the 'perf(1)' tool.
+
+		These events may not be supported by other CPUs.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+		Further, multiple terms like 'event=0xNNNN' can be specified
+		and separated with comma. All available terms are defined in
+		the /sys/bus/event_source/devices/<dev>/format file.

linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-format

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
new file mode 100644
index 0000000..079afc7
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-event_source-devices-format
@@ -0,0 +1,14 @@
+Where:		/sys/bus/event_source/devices/<dev>/format
+Date:		January 2012
+Kernel Version: 3.3
+Contact:	Jiri Olsa <jolsa@redhat.com>
+Description:
+		Attribute group to describe the magic bits that go into
+		perf_event_attr::config[012] for a particular pmu.
+		Each attribute of this group defines the 'hardware' bitmask
+		we want to export, so that userspace can deal with sane
+		name/value pairs.
+
+		Example: 'config1:1,6-10,44'
+		Defines contents of attribute that occupies bits 1,6-10,44 of
+		perf_event_attr::config1.

linux-imx/Documentation/ABI/testing/sysfs-bus-fcoe

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-fcoe b/linux-imx/Documentation/ABI/testing/sysfs-bus-fcoe
new file mode 100644
index 0000000..21640ea
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -0,0 +1,116 @@
+What:		/sys/bus/fcoe/
+Date:		August 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	The FCoE bus. Attributes in this directory are control interfaces.
+Attributes:
+
+	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+		     <ifname> to this file will allocate and populate sysfs with a
+		     fcoe_ctlr_device (ctlr_X). The user can then configure any
+		     per-port settings and finally write to the fcoe_ctlr_device's
+		     'start' attribute to begin the kernel's discovery and login
+		     process.
+
+	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+		       fcoe_ctlr_device's sysfs name to this file will log the
+		       fcoe_ctlr_device out of the fabric or otherwise connected
+		       FCoE devices. It will also free all kernel memory allocated
+		       for this fcoe_ctlr_device and any structures associated
+		       with it, this includes the scsi_host.
+
+What:		/sys/bus/fcoe/devices/ctlr_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE Controller' instances on the fcoe bus.
+		The FCoE Controller now has a three stage creation process.
+		1) Write interface name to ctlr_create 2) Configure the FCoE
+		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
+		discovery and login. The FCoE Controller is destroyed by
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+
+Attributes:
+
+	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
+			  this value will change the dev_loss_tmo for all
+			  FCFs discovered by this controller.
+
+	mode:		  Display or change the FCoE Controller's mode. Possible
+			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
+			  is started in 'Fabric' mode then FIP FCF discovery is
+			  initiated and ultimately a fabric login is attempted.
+			  If a FCoE Controller is started in 'VN2VN' mode then
+			  FIP VN2VN discovery and login is performed. A FCoE
+			  Controller only supports one mode at a time.
+
+	enabled:	  Whether an FCoE controller is enabled or disabled.
+			  0 if disabled, 1 if enabled. Writing either 0 or 1
+			  to this file will enable or disable the FCoE controller.
+
+	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
+
+	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
+			  failure count.
+
+	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
+			  Initialization Protocol (FIP) Keep-Alives (FKA).
+
+	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
+
+	lesb/err_block:   Link Error Status Block (LESB) block error count.
+
+	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
+			  Serivces error count.
+
+Notes: ctlr_X (global increment starting at 0)
+
+What:		/sys/bus/fcoe/devices/fcf_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
+		Forwarder, which is a FCoE switch that can accept FCoE
+		(Ethernet) packets, unpack them, and forward the embedded
+		Fibre Channel frames into a FC fabric. It can also take
+		outbound FC frames and pack them in Ethernet packets to
+		be sent to their destination on the Ethernet segment.
+Attributes:
+
+	fabric_name: Identifies the fabric that the FCF services.
+
+	switch_name: Identifies the FCF.
+
+	priority:    The switch's priority amongst other FCFs on the same
+		     fabric.
+
+	selected:    1 indicates that the switch has been selected for use;
+		     0 indicates that the swich will not be used.
+
+	fc_map:      The Fibre Channel MAP
+
+	vfid:	     The Virtual Fabric ID
+
+	mac:         The FCF's MAC address
+
+	fka_peroid:  The FIP Keep-Alive peroid
+
+	fabric_state: The internal kernel state
+		      "Unknown" - Initialization value
+		      "Disconnected" - No link to the FCF/fabric
+		      "Connected" - Host is connected to the FCF
+		      "Deleted" - FCF is being removed from the system
+
+	dev_loss_tmo: The device loss timeout peroid for this FCF.
+
+Notes: A device loss infrastructre similar to the FC Transport's
+       is present in fcoe_sysfs. It is nice to have so that a
+       link flapping adapter doesn't continually advance the count
+       used to identify the discovered FCF. FCFs will exist in a
+       "Disconnected" state until either the timer expires and the
+       FCF becomes "Deleted" or the FCF is rediscovered and becomes
+       "Connected."
+
+
+Users: The first user of this interface will be the fcoeadm application,
+       which is commonly packaged in the fcoe-utils package.

linux-imx/Documentation/ABI/testing/sysfs-bus-hsi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-hsi b/linux-imx/Documentation/ABI/testing/sysfs-bus-hsi
new file mode 100644
index 0000000..1b1b282
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-hsi
@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
new file mode 100644
index 0000000..9de269b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
@@ -0,0 +1,21 @@
+What:		/sys/bus/i2c/devices/.../device
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show what device is attached
+		NONE - no device
+		USB - USB device is attached
+		UART - UART is attached
+		CHARGER - Charger is attaced
+		JIG - JIG is attached
+
+What:		/sys/bus/i2c/devices/.../switch
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show or set the state of manual switch
+		VAUDIO - switch to VAUDIO path
+		UART - switch to UART path
+		AUDIO - switch to AUDIO path
+		DHOST - switch to DHOST path
+		AUTO - switch automatically by device

linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
new file mode 100644
index 0000000..feb2e4a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
@@ -0,0 +1,21 @@
+Where:		/sys/bus/i2c/devices/.../heading0_input
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Reports the current heading from the compass as a floating
+		point value in degrees.
+
+Where:		/sys/bus/i2c/devices/.../power_state
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the power state of the device. 0 sets the device into
+		sleep mode, 1 wakes it up.
+
+Where:		/sys/bus/i2c/devices/.../calibration
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the calibration on or off (1 = on, 0 = off). See the
+		chip data sheet.
+

linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533 b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533
new file mode 100644
index 0000000..1b62230
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533
@@ -0,0 +1,15 @@
+What:		/sys/bus/i2c/devices/.../output_hvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling backlight device for high-voltage current
+		sink HVLED[n] (n = 1, 2) (0, 1).
+
+What:		/sys/bus/i2c/devices/.../output_lvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling led device for low-voltage current sink
+		LVLED[n] (n = 1..5) (0..3).

linux-imx/Documentation/ABI/testing/sysfs-bus-iio

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio
new file mode 100644
index 0000000..290db2a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio
@@ -0,0 +1,805 @@
+What:		/sys/bus/iio/devices/iio:deviceX
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware chip or device accessed by one communication port.
+		Corresponds to a grouping of sensor channels. X is the IIO
+		index of the device.
+
+What:		/sys/bus/iio/devices/triggerX
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		An event driven driver of data capture to an in kernel buffer.
+		May be provided by a device driver that also has an IIO device
+		based on hardware generated events (e.g. data ready) or
+		provided by a separate driver for other hardware (e.g.
+		periodic timer, GPIO or high resolution timer).
+		Contains trigger type specific elements. These do not
+		generalize well and hence are not documented in this file.
+		X is the IIO index of the trigger.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory of attributes relating to the buffer for the device.
+
+What:		/sys/bus/iio/devices/iio:deviceX/name
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the physical chip / device for device X.
+		Typically a part number.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some devices have internal clocks.  This parameter sets the
+		resulting sampling frequency.  In many devices this
+		parameter has an effect on input filters etc. rather than
+		simply controlling when the input is sampled.  As this
+		effects data ready triggers, hardware buffers and the sysfs
+		direct access interfaces, it may be found in any of the
+		relevant directories.  If it effects all of the above
+		then it is to be found in the base device directory.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		When the internal sampling clock can only take a small
+		discrete set of values, this file lists those available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent ADC oversampling. Controls the sampling ratio
+		of the digital filter if available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware dependent values supported by the oversampling filter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) voltage measurement from
+		channel Y. In special cases where the channel does not
+		correspond to externally available input one of the named
+		versions may be used. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are microvolts.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) differential voltage measurement equivalent to
+		channel Y - channel Z where these channel numbers apply to the
+		physically equivalent inputs when non differential readings are
+		separately available. In differential only parts, then all that
+		is required is a consistent labeling.  Units after application
+		of scale and offset are microvolts.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw capacitance measurement from channel Y. Units after
+		application of scale and offset are nanofarads.
+
+What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw differential capacitance measurement equivalent to
+		channel Y - channel Z where these channel numbers apply to the
+		physically equivalent inputs when non differential readings are
+		separately available. In differential only parts, then all that
+		is required is a consistent labeling.  Units after application
+		of scale and offset are nanofarads.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) temperature measurement.
+		If an axis is specified it generally means that the temperature
+		sensor is associated with one part of a compound device (e.g.
+		a gyroscope axis). Units after application of scale and offset
+		are milli degrees Celsius.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled temperature measurement in milli degrees Celsius.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Acceleration in direction x, y or z (may be arbitrarily assigned
+		but should match other such assignments on device).
+		Has all of the equivalent parameters as per voltageY. Units
+		after application of scale and offset are m/s^2.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Angular velocity about axis x, y or z (may be arbitrarily
+		assigned). Has all the equivalent parameters as	per voltageY.
+		Units after application of scale and offset are	radians per
+		second.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_incli_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Inclination raw reading about axis x, y or z (may be
+		arbitrarily assigned). Data converted by application of offset
+		and scale to degrees.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_raw
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Magnetic field along axis x, y or z (may be arbitrarily
+		assigned).  Data converted by application of offset
+		then scale to Gauss.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
+KernelVersion:	2.6.36
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Highest value since some reset condition.  These
+		attributes allow access to this and are otherwise
+		the direct equivalent of the <type>Y[_name]_raw attributes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw
+KernelVersion:	2.6.36
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A computed peak value based on the sum squared magnitude of
+		the underlying value in the specified directions.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_raw
+KernelVersion:	3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw pressure measurement from channel Y. Units after
+		application of scale and offset are kilopascal.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If known for a device, offset to be added to <type>[Y]_raw prior
+		to scaling by <type>[Y]_scale in order to obtain value in the
+		<type> units as specified in <type>[Y]_raw documentation.
+		Not present if the offset is always 0 or unknown. If Y or
+		axis <x|y|z> is not present, then the offset applies to all
+		in channels of <type>.
+		May be writable if a variable offset can be applied on the
+		device. Note that this is different to calibbias which
+		is for devices (or drivers) that apply offsets to compensate
+		for variation between different instances of the part, typically
+		adjusted by using some hardware supported calibration procedure.
+		Calibbias is applied internally, offset is applied in userspace
+		to the _raw output.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If known for a device, scale to be applied to <type>Y[_name]_raw
+		post addition of <type>[Y][_name]_offset in order to obtain the
+		measured value in <type> units as specified in
+		<type>[Y][_name]_raw documentation.  If shared across all in
+		channels then Y and <x|y|z> are not present and the value is
+		called <type>[Y][_name]_scale. The peak modifier means this
+		value is applied to <type>Y[_name]_peak_raw values.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied calibration offset (assumed to fix production
+		inaccuracies).
+
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
+What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied calibration scale factor (assumed to fix
+		production inaccuracies).  If shared across all channels,
+		<type>_calibscale is used.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What:		/sys/.../iio:deviceX/in_voltageX_scale_available
+What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
+What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
+What:		/sys/.../iio:deviceX/in_capacitance_scale_available
+What:		/sys/.../iio:deviceX/in_pressure_scale_available
+What:		/sys/.../iio:deviceX/in_pressureY_scale_available
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a discrete set of scale values is available, they
+		are listed in this attribute.
+
+What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Hardware applied gain factor. If shared across all channels,
+		<type>_hardwaregain is used.
+
+What:		/sys/.../in_accel_filter_low_pass_3db_frequency
+What:		/sys/.../in_magn_filter_low_pass_3db_frequency
+What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
+KernelVersion:	3.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If a known or controllable low pass filter is applied
+		to the underlying data channel, then this parameter
+		gives the 3dB frequency of the filter in Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled, no bias etc.) output voltage for
+		channel Y.  The number must always be specified and
+		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled, no bias etc.) output voltage for an aggregate of
+		channel Y, channel Z, etc.  This interface is available in cases
+		where a single output sets the value for multiple channels
+		simultaneously.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the output powerdown mode.
+		DAC output stage is disconnected from the amplifier and
+		1kohm_to_gnd: connected	to ground via an 1kOhm resistor,
+		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
+		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		three_state: left floating.
+		For a list of available output power down options read
+		outX_powerdown_mode_available. If Y is not present the
+		mode is shared across all outputs.
+
+What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available output power down modes.
+		If Y is not present the mode is shared across all outputs.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing 1 causes output Y to enter the power down mode specified
+		by the corresponding outY_powerdown_mode. DAC output stage is
+		disconnected from the amplifier. Clearing returns to normal
+		operation. Y may be suppressed if all outputs are controlled
+		together.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/events
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configuration of which hardware generated events are passed up
+		to user-space.
+
+What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Event generated when channel passes a threshold in the specified
+		(_rising|_falling) direction. If the direction is not specified,
+		then either the device will report an event which ever direction
+		a single threshold value is passed in (e.g.
+		<type>[Y][_name]_<raw|input>_thresh_value) or
+		<type>[Y][_name]_<raw|input>_thresh_rising_value and
+		<type>[Y][_name]_<raw|input>_thresh_falling_value may take
+		different values, but the device can only enable both thresholds
+		or neither.
+		Note the driver will assume the last p events requested are
+		to be enabled where p is how many it supports (which may vary
+		depending on the exact set requested. So if you want to be
+		sure you have set what you think you have, check the contents of
+		these attributes after everything is configured. Drivers may
+		have to buffer any parameters so that they are consistent when
+		a given event type is enabled at a future point (and not those for
+		whatever event was previously enabled).
+
+What:		/sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_x_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_voltageY_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_tempY_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_tempY_roc_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Event generated when channel passes a threshold on the rate of
+		change (1st differential) in the specified (_rising|_falling)
+		direction. If the direction is not specified, then either the
+		device will report an event which ever direction a single
+		threshold value is passed in (e.g.
+		<type>[Y][_name]_<raw|input>_roc_value) or
+		<type>[Y][_name]_<raw|input>_roc_rising_value and
+		<type>[Y][_name]_<raw|input>_roc_falling_value may take
+		different values, but the device can only enable both rate of
+		change thresholds or neither.
+		Note the driver will assume the last p events requested are
+		to be enabled where p is however many it supports (which may
+		vary depending on the exact set requested. So if you want to be
+		sure you have set what you think you have, check the contents of
+		these attributes after everything is configured. Drivers may
+		have to buffer any parameters so that they are consistent when
+		a given event type is enabled a future point (and not those for
+		whatever event was previously enabled).
+
+What:		/sys/.../events/in_accel_x_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_x_raw_thresh_falling_value
+What:		/sys/.../events/in_accel_y_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_y_raw_thresh_falling_value
+What:		/sys/.../events/in_accel_z_raw_thresh_rising_value
+What:		/sys/.../events/in_accel_z_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_x_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_x_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_y_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_y_raw_thresh_falling_value
+What:		/sys/.../events/in_anglvel_z_raw_thresh_rising_value
+What:		/sys/.../events/in_anglvel_z_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_x_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_x_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_y_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_y_raw_thresh_falling_value
+What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
+What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
+What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
+What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
+What:		/sys/.../events/in_tempY_raw_thresh_rising_value
+What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_illuminance0_thresh_falling_value
+what:		/sys/.../events/in_illuminance0_thresh_rising_value
+what:		/sys/.../events/in_proximity0_thresh_falling_value
+what:		/sys/.../events/in_proximity0_thresh_rising_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the value of threshold that the device is comparing
+		against for the events enabled by
+		<type>Y[_name]_thresh[_rising|falling]_en.
+		If separate attributes exist for the two directions, but
+		direction is not specified for this attribute, then a single
+		threshold value applies to both directions.
+		The raw or input element of the name indicates whether the
+		value is in raw device units or in processed units (as _raw
+		and _input do on sysfs direct channel read attributes).
+
+What:		/sys/.../events/in_accel_x_raw_roc_rising_value
+What:		/sys/.../events/in_accel_x_raw_roc_falling_value
+What:		/sys/.../events/in_accel_y_raw_roc_rising_value
+What:		/sys/.../events/in_accel_y_raw_roc_falling_value
+What:		/sys/.../events/in_accel_z_raw_roc_rising_value
+What:		/sys/.../events/in_accel_z_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_x_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_x_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_y_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_y_raw_roc_falling_value
+What:		/sys/.../events/in_anglvel_z_raw_roc_rising_value
+What:		/sys/.../events/in_anglvel_z_raw_roc_falling_value
+What:		/sys/.../events/in_magn_x_raw_roc_rising_value
+What:		/sys/.../events/in_magn_x_raw_roc_falling_value
+What:		/sys/.../events/in_magn_y_raw_roc_rising_value
+What:		/sys/.../events/in_magn_y_raw_roc_falling_value
+What:		/sys/.../events/in_magn_z_raw_roc_rising_value
+What:		/sys/.../events/in_magn_z_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
+What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_raw_roc_rising_value
+What:		/sys/.../events/in_voltageY_raw_roc_falling_value
+What:		/sys/.../events/in_tempY_raw_roc_rising_value
+What:		/sys/.../events/in_tempY_raw_roc_falling_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the value of rate of change threshold that the
+		device is comparing against for the events enabled by
+		<type>[Y][_name]_roc[_rising|falling]_en.
+		If separate attributes exist for the two directions,
+		but direction is not specified for this attribute,
+		then a single threshold value applies to both directions.
+		The raw or input element of the name indicates whether the
+		value is in raw device units or in processed units (as _raw
+		and _input do on sysfs direct channel read attributes).
+
+What:		/sys/.../events/in_accel_x_thresh_rising_period
+What:		/sys/.../events/in_accel_x_thresh_falling_period
+hat:		/sys/.../events/in_accel_x_roc_rising_period
+What:		/sys/.../events/in_accel_x_roc_falling_period
+What:		/sys/.../events/in_accel_y_thresh_rising_period
+What:		/sys/.../events/in_accel_y_thresh_falling_period
+What:		/sys/.../events/in_accel_y_roc_rising_period
+What:		/sys/.../events/in_accel_y_roc_falling_period
+What:		/sys/.../events/in_accel_z_thresh_rising_period
+What:		/sys/.../events/in_accel_z_thresh_falling_period
+What:		/sys/.../events/in_accel_z_roc_rising_period
+What:		/sys/.../events/in_accel_z_roc_falling_period
+What:		/sys/.../events/in_anglvel_x_thresh_rising_period
+What:		/sys/.../events/in_anglvel_x_thresh_falling_period
+What:		/sys/.../events/in_anglvel_x_roc_rising_period
+What:		/sys/.../events/in_anglvel_x_roc_falling_period
+What:		/sys/.../events/in_anglvel_y_thresh_rising_period
+What:		/sys/.../events/in_anglvel_y_thresh_falling_period
+What:		/sys/.../events/in_anglvel_y_roc_rising_period
+What:		/sys/.../events/in_anglvel_y_roc_falling_period
+What:		/sys/.../events/in_anglvel_z_thresh_rising_period
+What:		/sys/.../events/in_anglvel_z_thresh_falling_period
+What:		/sys/.../events/in_anglvel_z_roc_rising_period
+What:		/sys/.../events/in_anglvel_z_roc_falling_period
+What:		/sys/.../events/in_magn_x_thresh_rising_period
+What:		/sys/.../events/in_magn_x_thresh_falling_period
+What:		/sys/.../events/in_magn_x_roc_rising_period
+What:		/sys/.../events/in_magn_x_roc_falling_period
+What:		/sys/.../events/in_magn_y_thresh_rising_period
+What:		/sys/.../events/in_magn_y_thresh_falling_period
+What:		/sys/.../events/in_magn_y_roc_rising_period
+What:		/sys/.../events/in_magn_y_roc_falling_period
+What:		/sys/.../events/in_magn_z_thresh_rising_period
+What:		/sys/.../events/in_magn_z_thresh_falling_period
+What:		/sys/.../events/in_magn_z_roc_rising_period
+What:		/sys/.../events/in_magn_z_roc_falling_period
+What:		/sys/.../events/in_voltageY_supply_thresh_rising_period
+What:		/sys/.../events/in_voltageY_supply_thresh_falling_period
+What:		/sys/.../events/in_voltageY_supply_roc_rising_period
+What:		/sys/.../events/in_voltageY_supply_roc_falling_period
+What:		/sys/.../events/in_voltageY_thresh_rising_period
+What:		/sys/.../events/in_voltageY_thresh_falling_period
+What:		/sys/.../events/in_voltageY_roc_rising_period
+What:		/sys/.../events/in_voltageY_roc_falling_period
+What:		/sys/.../events/in_tempY_thresh_rising_period
+What:		/sys/.../events/in_tempY_thresh_falling_period
+What:		/sys/.../events/in_tempY_roc_rising_period
+What:		/sys/.../events/in_tempY_roc_falling_period
+What:		/sys/.../events/in_accel_x&y&z_mag_falling_period
+What:		/sys/.../events/in_intensity0_thresh_period
+What:		/sys/.../events/in_proximity0_thresh_period
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Period of time (in seconds) for which the condition must be
+		met before an event is generated. If direction is not
+		specified then this period applies to both directions.
+
+What:		/sys/.../iio:deviceX/events/in_accel_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_z_mag_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Similar to in_accel_x_thresh[_rising|_falling]_en, but here the
+		magnitude of the channel is compared to the threshold, not its
+		signed value.
+
+What:		/sys/.../events/in_accel_raw_mag_value
+What:		/sys/.../events/in_accel_x_raw_mag_rising_value
+What:		/sys/.../events/in_accel_y_raw_mag_rising_value
+What:		/sys/.../events/in_accel_z_raw_mag_rising_value
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value to which the magnitude of the channel is compared. If
+		number or direction is not specified, applies to all channels of
+		this type.
+
+What:		/sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The name of the trigger source being used, as per string given
+		in /sys/class/iio/triggerY/name.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of scans contained by the buffer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Bytes per scan.  Due to alignment fun, the scan may be larger
+		than implied directly by the scan_element parameters.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Actually start the buffer capture up.  Will start trigger
+		if first device and appropriate.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory containing interfaces for elements that will be
+		captured for a single triggered sample set in the buffer.
+
+What:		/sys/.../buffer/scan_elements/in_accel_x_en
+What:		/sys/.../buffer/scan_elements/in_accel_y_en
+What:		/sys/.../buffer/scan_elements/in_accel_z_en
+What:		/sys/.../buffer/scan_elements/in_anglvel_x_en
+What:		/sys/.../buffer/scan_elements/in_anglvel_y_en
+What:		/sys/.../buffer/scan_elements/in_anglvel_z_en
+What:		/sys/.../buffer/scan_elements/in_magn_x_en
+What:		/sys/.../buffer/scan_elements/in_magn_y_en
+What:		/sys/.../buffer/scan_elements/in_magn_z_en
+What:		/sys/.../buffer/scan_elements/in_timestamp_en
+What:		/sys/.../buffer/scan_elements/in_voltageY_supply_en
+What:		/sys/.../buffer/scan_elements/in_voltageY_en
+What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../buffer/scan_elements/in_incli_x_en
+What:		/sys/.../buffer/scan_elements/in_incli_y_en
+What:		/sys/.../buffer/scan_elements/in_pressureY_en
+What:		/sys/.../buffer/scan_elements/in_pressure_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scan element control for triggered data capture.
+
+What:		/sys/.../buffer/scan_elements/in_accel_type
+What:		/sys/.../buffer/scan_elements/in_anglvel_type
+What:		/sys/.../buffer/scan_elements/in_magn_type
+What:		/sys/.../buffer/scan_elements/in_incli_type
+What:		/sys/.../buffer/scan_elements/in_voltageY_type
+What:		/sys/.../buffer/scan_elements/in_voltage_type
+What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
+What:		/sys/.../buffer/scan_elements/in_timestamp_type
+What:		/sys/.../buffer/scan_elements/in_pressureY_type
+What:		/sys/.../buffer/scan_elements/in_pressure_type
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the scan element data storage within the buffer
+		and hence the form in which it is read from user-space.
+		Form is [be|le]:[s|u]bits/storagebits[>>shift].
+		be or le specifies big or little endian. s or u specifies if
+		signed (2's complement) or unsigned. bits is the number of bits
+		of data and storagebits is the space (after padding) that it
+		occupies in the buffer. shift if specified, is the shift that
+		needs to be applied prior to masking out unused bits. Some
+		devices put their data in the middle of the transferred elements
+		with additional information on both sides.  Note that some
+		devices will have additional information in the unused bits
+		so to get a clean value, the bits value must be used to mask
+		the buffer output value appropriately.  The storagebits value
+		also specifies the data alignment.  So s48/64>>2 will be a
+		signed 48 bit integer stored in a 64 bit location aligned to
+		a 64 bit boundary. To obtain the clean value, shift right 2
+		and apply a mask to zero the top 16 bits of the result.
+		For other storage combinations this attribute will be extended
+		appropriately.
+
+What:		/sys/.../buffer/scan_elements/in_accel_type_available
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the type parameter can take one of a small set of values,
+		this attribute lists them.
+
+What:		/sys/.../buffer/scan_elements/in_voltageY_index
+What:		/sys/.../buffer/scan_elements/in_voltageY_supply_index
+What:		/sys/.../buffer/scan_elements/in_accel_x_index
+What:		/sys/.../buffer/scan_elements/in_accel_y_index
+What:		/sys/.../buffer/scan_elements/in_accel_z_index
+What:		/sys/.../buffer/scan_elements/in_anglvel_x_index
+What:		/sys/.../buffer/scan_elements/in_anglvel_y_index
+What:		/sys/.../buffer/scan_elements/in_anglvel_z_index
+What:		/sys/.../buffer/scan_elements/in_magn_x_index
+What:		/sys/.../buffer/scan_elements/in_magn_y_index
+What:		/sys/.../buffer/scan_elements/in_magn_z_index
+What:		/sys/.../buffer/scan_elements/in_incli_x_index
+What:		/sys/.../buffer/scan_elements/in_incli_y_index
+What:		/sys/.../buffer/scan_elements/in_timestamp_index
+What:		/sys/.../buffer/scan_elements/in_pressureY_index
+What:		/sys/.../buffer/scan_elements/in_pressure_index
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the position of this
+		scan element in the buffer. Note these are not dependent on
+		what is enabled and may not be contiguous. Thus for user-space
+		to establish the full layout these must be used in conjunction
+		with all _en attributes to establish which channels are present,
+		and the relevant _type attributes to establish the data storage
+		format.
+
+What:		/sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
+KernelVersion:	2.6.38
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the amount of quadrature error
+		present in the device at a given time.
+
+What:           /sys/.../iio:deviceX/in_intensity_red_integration_time
+What:           /sys/.../iio:deviceX/in_intensity_green_integration_time
+What:           /sys/.../iio:deviceX/in_intensity_blue_integration_time
+What:           /sys/.../iio:deviceX/in_intensity_clear_integration_time
+What:           /sys/.../iio:deviceX/in_illuminance_integration_time
+KernelVersion:  3.12
+Contact:        linux-iio@vger.kernel.org
+Description:
+                This attribute is used to get/set the integration time in
+                seconds.

linux-imx/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150
new file mode 100644
index 0000000..99847a9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150
@@ -0,0 +1,7 @@
+What:		/sys/bus/iio/devices/triggerX/name = "bmc150_accel-any-motion-devX"
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The BMC150 accelerometer kernel module provides an additional trigger,
+		which sets driver in a mode, where data is pushed to the buffer
+		only when there is any motion.

linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
new file mode 100644
index 0000000..2ce9c3f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -0,0 +1,37 @@
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present
+What:		/sys/bus/iio/devices/iio:deviceX/vcxo_clk_present
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'.
+		'1' means that the clock in question is present.
+		'0' means that the clock is missing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/pllY_locked
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'. '1' means that the
+		pllY is locked.
+
+What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' stores the current device configuration into
+		on-chip EEPROM. After power-up or chip reset the device will
+		automatically load the saved configuration.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sync_dividers
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' triggers the clock distribution synchronization
+		functionality. All dividers are reset and the channels start
+		with their predefined phase offsets (out_altvoltageY_phase).
+		Writing this file has the effect as driving the external
+		/SYNC pin low.

linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
new file mode 100644
index 0000000..d89aded
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
@@ -0,0 +1,21 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Stores channel Y frequency resolution/channel spacing in Hz.
+		The value given directly influences the MODULUS used by
+		the fractional-N PLL. It is assumed that the algorithm
+		that is used to compute the various dividers, is able to
+		generate proper values for multiples of channel spacing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_refin_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Sets channel Y REFin frequency in Hz. In some clock chained
+		applications, the reference frequency used by the PLL may
+		change during runtime. This attribute allows the user to
+		adjust the reference frequency accordingly.
+		The value written has no effect until out_altvoltageY_frequency
+		is updated. Consider to use out_altvoltageY_powerdown to power
+		down the PLL and it's RFOut buffers during REFin changes.

linux-imx/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
new file mode 100644
index 0000000..22c5ea6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
@@ -0,0 +1,61 @@
+What:		/sys/.../events/in_illuminance0_thresh_either_en
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Event generated when channel passes one of the four thresholds
+		in each direction (rising|falling) and a zone change occurs.
+		The corresponding light zone can be read from
+		in_illuminance0_zone.
+
+What:		/sys/.../events/in_illuminance0_threshY_hysteresis
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the hysteresis for thresholds Y, that is,
+		threshY_hysteresis = threshY_raising - threshY_falling
+
+What:		/sys/.../events/illuminance_threshY_falling_value
+What:		/sys/.../events/illuminance_threshY_raising_value
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Specifies the value of threshold that the device is comparing
+		against for the events enabled by
+		in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
+
+		Note that threshY_falling must be less than or equal to
+		threshY_raising.
+
+		These thresholds correspond to the eight zone-boundary
+		registers (boundaryY_{low,high}) and define the five light
+		zones.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the current light zone (0..4) as defined by the
+		in_illuminance0_threshY_{falling,rising} thresholds.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get output current for channel Y (0..255), that is,
+		out_currentY_currentZ_raw, where Z is the current zone.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the output current for channel out_currentY when in zone
+		Z (0..255), where Y in 0..2 and Z in 0..4.
+
+		These values correspond to the ALS-mapper target registers for
+		ALS-mapper Y + 1.

linux-imx/Documentation/ABI/testing/sysfs-bus-iio-mpu6050

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
new file mode 100644
index 0000000..cb53737
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
@@ -0,0 +1,13 @@
+What:           /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_accel_matrix
+What:           /sys/bus/iio/devices/iio:deviceX/in_magn_matrix
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+		This is mounting matrix for motion sensors. Mounting matrix
+		is a 3x3 unitary matrix. A typical mounting matrix would look like
+		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be
+		easy to tell the relative positions among sensors as well as their
+		positions relative to the board that holds these sensors. Identity matrix
+		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly
+		aligned with each other. All axes are exactly the same.

linux-imx/Documentation/ABI/testing/sysfs-bus-mdio

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-mdio b/linux-imx/Documentation/ABI/testing/sysfs-bus-mdio
new file mode 100644
index 0000000..6349749
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-mdio
@@ -0,0 +1,9 @@
+What:		/sys/bus/mdio_bus/devices/.../phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.

linux-imx/Documentation/ABI/testing/sysfs-bus-media

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-media b/linux-imx/Documentation/ABI/testing/sysfs-bus-media
new file mode 100644
index 0000000..7057e57
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-media
@@ -0,0 +1,6 @@
+What:		/sys/bus/media/devices/.../model
+Date:		January 2011
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+		linux-media@vger.kernel.org
+Description:	Contains the device model name in UTF-8. The device version is
+		is not be appended to the model name.

linux-imx/Documentation/ABI/testing/sysfs-bus-mei

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-mei b/linux-imx/Documentation/ABI/testing/sysfs-bus-mei
new file mode 100644
index 0000000..2066f0b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-mei
@@ -0,0 +1,7 @@
+What:		/sys/bus/mei/devices/.../modalias
+Date:		March 2013
+KernelVersion:	3.10
+Contact:	Samuel Ortiz <sameo@linux.intel.com>
+		linux-mei@linux.intel.com
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: mei:<mei device name>

linux-imx/Documentation/ABI/testing/sysfs-bus-pci

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-pci b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci
new file mode 100644
index 0000000..297493c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci
@@ -0,0 +1,255 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of files, with each file being named after a corresponding msi
+		irq vector allocated to that device.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the file is in (msi vs. msix)
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
+Date:		May 2011
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the bus and all child buses,
+		and re-discover devices removed earlier from this
+		part of the device tree.  Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../reset
+Date:		July 2009
+Contact:	Michael S. Tsirkin <mst@redhat.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same device.
+		For devices that have this support, a file named reset
+		will be present in sysfs.  Writing 1 to this file
+		will perform reset.
+
+What:		/sys/bus/pci/devices/.../vpd
+Date:		February 2008
+Contact:	Ben Hutchings <bhutchings@solarflare.com>
+Description:
+		A file named vpd in a device directory will be a
+		binary file containing the Vital Product Data for the
+		device.  It should follow the VPD format defined in
+		PCI Specification 2.1 or 2.2, but users should consider
+		that some devices may have malformatted data.  If the
+		underlying VPD has a writable section then the
+		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.
+
+What:		/sys/bus/pci/slots/.../module
+Date:		June 2009
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This symbolic link points to the PCI hotplug controller driver
+		module that manages the hotplug slot.
+
+What:		/sys/bus/pci/devices/.../label
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given name (SMBIOS type 41 string or ACPI _DSM string) of
+		the PCI device.	The attribute will be created only
+		if the firmware	has given a name to the PCI device.
+		ACPI _DSM string name will be given priority if the
+		system firmware provides SMBIOS type 41 string also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned name of the PCI device.
+
+What:		/sys/bus/pci/devices/.../index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (SMBIOS type 41 device type instance) of the
+		PCI device. The attribute will be created only if the firmware
+		has given an instance number to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned device type instance of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../acpi_index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (ACPI _DSM instance number) of the PCI device.
+		The attribute will be created only if the firmware has given
+		an instance number to the PCI device. ACPI _DSM instance number
+		will be given priority if the system firmware provides SMBIOS
+		type 41 device type instance also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned instance number of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
+
+What:		/sys/bus/pci/devices/.../sriov_totalvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read this file to determine the
+		maximum number of Virtual Functions (VFs) a PCIe physical
+		function (PF) can support. Typically, this is the value reported
+		in the PF's SR-IOV extended capability structure's TotalVFs
+		element.  Drivers have the ability at probe time to reduce the
+		value read from this file via the pci_sriov_set_totalvfs()
+		function.
+
+What:		/sys/bus/pci/devices/.../sriov_numvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read and write to this file to
+		determine and control the enablement or disablement of Virtual
+		Functions (VFs) on the physical function (PF). A read of this
+		file will return the number of VFs that are enabled on this PF.
+		A number written to this file will enable the specified
+		number of VFs. A userspace application would typically read the
+		file and check that the value is zero, and then write the number
+		of VFs that should be enabled on the PF; the value written
+		should be less than or equal to the value in the sriov_totalvfs
+		file. A userspace application wanting to disable the VFs would
+		write a zero to this file. The core ensures that valid values
+		are written to this file, and returns errors when values are not
+		valid.  For example, writing a 2 to this file when sriov_numvfs
+		is not 0 and not 2 already will return an error. Writing a 10
+		when the value of sriov_totalvfs is 8 will return an error.

linux-imx/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
new file mode 100644
index 0000000..53d99ed
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -0,0 +1,80 @@
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 model for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 revision for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 83 serial number for logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	Displays the SCSI INQUIRY page 0 vendor for logical drive
+		Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:		March 2009
+Kernel Version: 2.6.30
+Contact:	iss_storagedev@hp.com
+Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/resettable
+Date:		February 2011
+Kernel Version:	2.6.38
+Contact:	iss_storagedev@hp.com
+Description:	Value of 1 indicates the controller can honor the reset_devices
+		kernel parameter.  Value of 0 indicates reset_devices cannot be
+		honored.  This is to allow, for example, kexec tools to be able
+		to warn the user if they designate an unresettable device as
+		a dump device, as kdump requires resetting the device in order
+		to work reliably.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
+Date:		July 2011
+Kernel Version:	3.0
+Contact:	iss_storagedev@hp.com
+Description:	Value of "simple" indicates that the controller has been placed
+		in "simple mode". Value of "performant" indicates that the
+		controller has been placed in "performant mode".

linux-imx/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
new file mode 100644
index 0000000..60c60fa
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
@@ -0,0 +1,46 @@
+What:		/sys/bus/pci/drivers/ehci_hcd/.../companion
+		/sys/bus/usb/devices/usbN/../companion
+Date:		January 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
+		controllers) are often implemented along with a set of
+		"companion" full/low-speed USB-1.1 controllers.  When a
+		high-speed device is plugged in, the connection is routed
+		to the EHCI controller; when a full- or low-speed device
+		is plugged in, the connection is routed to the companion
+		controller.
+
+		Sometimes you want to force a high-speed device to connect
+		at full speed, which can be accomplished by forcing the
+		connection to be routed to the companion controller.
+		That's what this file does.  Writing a port number to the
+		file causes connections on that port to be routed to the
+		companion controller, and writing the negative of a port
+		number returns the port to normal operation.
+
+		For example: To force the high-speed device attached to
+		port 4 on bus 2 to run at full speed:
+
+			echo 4 >/sys/bus/usb/devices/usb2/../companion
+
+		To return the port to high-speed operation:
+
+			echo -4 >/sys/bus/usb/devices/usb2/../companion
+
+		Reading the file gives the list of ports currently forced
+		to the companion controller.
+
+		Note: Some EHCI controllers do not have companions; they
+		may contain an internal "transaction translator" or they
+		may be attached directly to a "rate-matching hub".  This
+		mechanism will not work with such controllers.  Also, it
+		cannot be used to force a port on a high-speed hub to
+		connect at full speed.
+
+		Note: When this file was first added, it appeared in a
+		different sysfs directory.  The location given above is
+		correct for 2.6.35 (and probably several earlier kernel
+		versions as well).
+

linux-imx/Documentation/ABI/testing/sysfs-bus-rbd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-rbd b/linux-imx/Documentation/ABI/testing/sysfs-bus-rbd
new file mode 100644
index 0000000..0a30647
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-rbd
@@ -0,0 +1,72 @@
+What:		/sys/bus/rbd/
+Date:		November 2010
+Contact:	Yehuda Sadeh <yehuda@newdream.net>,
+		Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+  $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+	The ceph unique client id that was assigned for this specific session.
+
+features
+
+	A hexadecimal encoding of the feature bits for this image.
+
+major
+
+	The block device major number.
+
+name
+
+	The name of the rbd image.
+
+image_id
+
+	The unique id for the rbd image.  (For rbd image format 1
+	this is empty.)
+
+pool
+
+	The name of the storage pool where this rbd image resides.
+	An rbd image name is unique within its pool.
+
+pool_id
+
+	The unique identifier for the rbd image's pool.  This is
+	a permanent attribute of the pool.  A pool's id will never
+	change.
+
+size
+
+	The size (in bytes) of the mapped block device.
+
+refresh
+
+	Writing to this file will reread the image header data and set
+	all relevant datastructures accordingly.
+
+current_snap
+
+	The current snapshot for which the device is mapped.
+
+parent
+
+	Information identifying the pool, image, and snapshot id for
+	the parent image in a layered rbd image (format 2 only).

linux-imx/Documentation/ABI/testing/sysfs-bus-rpmsg

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-rpmsg b/linux-imx/Documentation/ABI/testing/sysfs-bus-rpmsg
new file mode 100644
index 0000000..189e419
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-rpmsg
@@ -0,0 +1,75 @@
+What:		/sys/bus/rpmsg/devices/.../name
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified with a (textual) name,
+		which is maximum 32 bytes long (defined as RPMSG_NAME_SIZE in
+		rpmsg.h).
+
+		This sysfs entry contains the name of this channel.
+
+What:		/sys/bus/rpmsg/devices/.../src
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity (a kernel driver).
+
+		This sysfs entry contains the src (local) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if no driver exists for this
+		channel).
+
+What:		/sys/bus/rpmsg/devices/.../dst
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity.
+
+		This sysfs entry contains the dst (remote) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if the kernel driver that
+		is attached to this channel is exposing a service to the
+		remote processor. This make it a local rpmsg server,
+		and it is listening for inbound messages that may be sent
+		from any remote rpmsg client; it is not bound to a single
+		remote entity).
+
+What:		/sys/bus/rpmsg/devices/.../announce
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified by a textual name (see
+		/sys/bus/rpmsg/devices/.../name above) and have a local
+		("source") rpmsg address, and remote ("destination") rpmsg
+		address.
+
+		A channel is first created when an entity, whether local
+		or remote, starts listening on it for messages (and is thus
+		called an rpmsg server).
+
+		When that happens, a "name service" announcement is sent
+		to the other processor, in order to let it know about the
+		creation of the channel (this way remote clients know they
+		can start sending messages).
+
+		This sysfs entry tells us whether the channel is a local
+		server channel that is announced (values are either
+		true or false).

linux-imx/Documentation/ABI/testing/sysfs-bus-umc

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-umc b/linux-imx/Documentation/ABI/testing/sysfs-bus-umc
new file mode 100644
index 0000000..948fec4
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-umc
@@ -0,0 +1,28 @@
+What:           /sys/bus/umc/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The Wireless Host Controller Interface (WHCI)
+                specification describes a PCI-based device with
+                multiple capabilities; the UWB Multi-interface
+                Controller (UMC).
+
+                The umc bus presents each of the individual
+                capabilties as a device.
+
+What:           /sys/bus/umc/devices/.../capability_id
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The ID of this capability, with 0 being the radio
+                controller capability.
+
+What:           /sys/bus/umc/devices/.../version
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The specification version this capability's hardware
+                interface complies with.

linux-imx/Documentation/ABI/testing/sysfs-bus-usb

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-usb b/linux-imx/Documentation/ABI/testing/sysfs-bus-usb
new file mode 100644
index 0000000..f093e59
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-usb
@@ -0,0 +1,238 @@
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		If CONFIG_USB_PERSIST is set, then each USB device directory
+		will contain a file named power/persist.  The file holds a
+		boolean value (0 or 1) indicating whether or not the
+		"USB-Persist" facility is enabled for the device.  Since the
+		facility is inherently dangerous, it is disabled by default
+		for all devices except hubs.  For more information, see
+		Documentation/usb/persist.txt.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been connected to the machine.  This
+		file is read-only.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been active, i.e. not in a suspended
+		state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example,
+		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/device/<busnum>-<devnum>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../authorized
+Date:		July 2008
+KernelVersion:	2.6.26
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		Authorized devices are available for use by device
+		drivers, non-authorized one are not.  By default, wired
+		USB devices are authorized.
+
+		Certified Wireless USB devices are not authorized
+		initially and should be (by writing 1) after the
+		device has been authenticated.
+
+What:		/sys/bus/usb/device/.../wusb_cdid
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		A devices's CDID, as 16 space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_ck
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write the device's connection key (CK) to start the
+		authentication of the device.  The CK is 16
+		space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_disconnect
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write a 1 to force the device to disconnect
+		(equivalent to unplugging a wired USB device).
+
+What:		/sys/bus/usb/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a USB device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time. The format for the device ID is:
+		idVendor idProduct bInterfaceClass.
+		The vendor ID and device ID fields are required, the
+		interface class is optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+		Reading from this file will list all dynamically added
+		device IDs in the same format, with one entry per
+		line. For example:
+		# cat /sys/bus/usb/drivers/foo/new_id
+		8086 10f5
+		dead beef 06
+		f00d cafe
+
+		The list will be truncated at PAGE_SIZE bytes due to
+		sysfs restrictions.
+
+What:		/sys/bus/usb-serial/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		For serial USB drivers, this attribute appears under the
+		extra bus folder "usb-serial" in sysfs; apart from that
+		difference, all descriptions from the entry
+		"/sys/bus/usb/drivers/.../new_id" apply.
+
+What:		/sys/bus/usb/drivers/.../remove_id
+Date:		November 2009
+Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		idVendor idProduct.	After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+		Reading from this file will list the dynamically added
+		device IDs, exactly like reading from the entry
+		"/sys/bus/usb/drivers/.../new_id"
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
+Date:		September 2011
+Contact:	Andiry Xu <andiry.xu@amd.com>
+Description:
+		If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
+		is plugged in to a xHCI host which support link PM, it will
+		perform a LPM test; if the test is passed and host supports
+		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
+		be enabled for the device and the USB device directory will
+		contain a file named power/usb2_hardware_lpm.  The file holds
+		a string value (enable or disable) indicating whether or not
+		USB2 hardware LPM is enabled for the device. Developer can
+		write y/Y/1 or n/N/0 to the file to enable/disable the
+		feature.
+
+What:		/sys/bus/usb/devices/.../removable
+Date:		February 2012
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		Some information about whether a given USB device is
+		physically fixed to the platform can be inferred from a
+		combination of hub descriptor bits and platform-specific data
+		such as ACPI. This file will read either "removable" or
+		"fixed" if the information is available, and "unknown"
+		otherwise.
+
+What:		/sys/bus/usb/devices/.../ltm_capable
+Date:		July 2012
+Contact:	Sarah Sharp <sarah.a.sharp@linux.intel.com>
+Description:
+		USB 3.0 devices may optionally support Latency Tolerance
+		Messaging (LTM).  They indicate their support by setting a bit
+		in the bmAttributes field of their SuperSpeed BOS descriptors.
+		If that bit is set for the device, ltm_capable will read "yes".
+		If the device doesn't support LTM, the file will read "no".
+		The file will be present for all speeds of USB devices, and will
+		always read "no" for USB 1.1 and USB 2.0 devices.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX
+Date:		August 2012
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		The /sys/bus/usb/devices/.../(hub interface)/portX
+		is usb port device's sysfs directory.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+Date:		January 2013
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		Some platforms provide usb port connect types through ACPI.
+		This attribute is to expose these information to user space.
+		The file will read "hotplug", "wired" and "not used" if the
+		information is available, and "unknown" otherwise.

linux-imx/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/linux-imx/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
new file mode 100644
index 0000000..70d00df
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
@@ -0,0 +1,43 @@
+Where:		/sys/bus/usb/.../powered
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls whether the device's display will powered.
+		A value of 0 is off and a non-zero value is on.
+
+Where:		/sys/bus/usb/.../mode_msb
+Where:		/sys/bus/usb/.../mode_lsb
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the devices display mode.
+		For a 6 character display the values are
+			MSB 0x06; LSB 0x3F, and
+		for an 8 character display the values are
+			MSB 0x08; LSB 0xFF.
+
+Where:		/sys/bus/usb/.../textmode
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the way the device interprets its text buffer.
+		raw:	each character controls its segment manually
+		hex:	each character is between 0-15
+		ascii:	each character is between '0'-'9' and 'A'-'F'.
+
+Where:		/sys/bus/usb/.../text
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	The text (or data) for the device to display
+
+Where:		/sys/bus/usb/.../decimals
+Date:		August 2008
+Kernel Version:	2.6.26
+Contact:	Harrison Metzger <harrisonmetz@gmail.com>
+Description:	Controls the decimal places on the device.
+		To set the nth decimal place, give this field
+		the value of 10 ** n. Assume this field has
+		the value k and has 1 or more decimal places set,
+		to set the mth place (where m is not already set),
+		change this fields value to k + 10 ** m.

linux-imx/Documentation/ABI/testing/sysfs-c2port

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-c2port b/linux-imx/Documentation/ABI/testing/sysfs-c2port
new file mode 100644
index 0000000..716cffc
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-c2port
@@ -0,0 +1,88 @@
+What:		/sys/class/c2port/
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/ directory will contain files and
+		directories that will provide a unified interface to
+		the C2 port interface.
+
+What:		/sys/class/c2port/c2portX
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/ directory is related to X-th
+		C2 port into the system. Each directory will contain files to
+		manage and control its C2 port.
+
+What:		/sys/class/c2port/c2portX/access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/access file enable the access
+		to the C2 port from the system. No commands can be sent
+		till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/dev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/dev_id file show the device ID
+		of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_access file enable the
+		access to the on-board flash of the connected micro.
+		No commands can be sent till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/flash_block_size
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_block_size file show
+		the on-board flash block size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_blocks_num
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_blocks_num file show
+		the on-board flash blocks number of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_data
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_data file export
+		the content of the on-board flash of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file execute
+		the "erase" command on the on-board flash of the connected
+		micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file show the
+		on-board flash size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/reset
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/reset file execute a "reset"
+		command on the connected micro.
+
+What:		/sys/class/c2port/c2portX/rev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/rev_id file show the revision ID
+		of the connected micro.

linux-imx/Documentation/ABI/testing/sysfs-cfq-target-latency

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-cfq-target-latency b/linux-imx/Documentation/ABI/testing/sysfs-cfq-target-latency
new file mode 100644
index 0000000..df0f782
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-cfq-target-latency
@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.

linux-imx/Documentation/ABI/testing/sysfs-class

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class b/linux-imx/Documentation/ABI/testing/sysfs-class
new file mode 100644
index 0000000..676530f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class
@@ -0,0 +1,16 @@
+What:		/sys/class/
+Date:		Febuary 2006
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		The /sys/class directory will consist of a group of
+		subdirectories describing individual classes of devices
+		in the kernel.  The individual directories will consist
+		of either subdirectories, or symlinks to other
+		directories.
+
+		All programs that use this directory tree must be able
+		to handle both subdirectories or symlinks in order to
+		work properly.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>

linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
new file mode 100644
index 0000000..33e6488
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_max
+What:		/sys/class/backlight/<backlight>/l1_daylight_max
+What:		/sys/class/backlight/<backlight>/l2_bright_max
+What:		/sys/class/backlight/<backlight>/l3_office_max
+What:		/sys/class/backlight/<backlight>/l4_indoor_max
+What:		/sys/class/backlight/<backlight>/l5_dark_max
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the maximum brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127. This file
+		will also show the brightness level stored for this
+		<ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_dim
+What:		/sys/class/backlight/<backlight>/l2_bright_dim
+What:		/sys/class/backlight/<backlight>/l3_office_dim
+What:		/sys/class/backlight/<backlight>/l4_indoor_dim
+What:		/sys/class/backlight/<backlight>/l5_dark_dim
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the dim brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127, typically
+		set to 0. Full off when the backlight is disabled.
+		This file will also show the dim brightness level stored for
+		this <ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_level
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get conversion value of the light sensor.
+		This value is updated every 80 ms (when the light sensor
+		is enabled). Returns integer between 0 (dark) and
+		8000 (max ambient brightness)
+
+What:		/sys/class/backlight/<backlight>/ambient_light_zone
+Date:		May 2011
+KernelVersion:	3.0
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get/Set current ambient light zone. Reading returns
+		integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+		Writing a value between 1..5 forces the backlight controller
+		to enter the corresponding ambient light zone.
+		Writing 0 returns to normal/automatic ambient light level
+		operation. The ambient light sensing feature on these devices
+		is an extension to the API documented in
+		Documentation/ABI/stable/sysfs-class-backlight.
+		It can be enabled by writing the value stored in
+		/sys/class/backlight/<backlight>/max_brightness to
+		/sys/class/backlight/<backlight>/brightness.

linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
new file mode 100644
index 0000000..77cf7ac
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533
@@ -0,0 +1,48 @@
+What:		/sys/class/backlight/<backlight>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the ALS output channel used as input in
+		ALS-current-control mode (0, 1), where
+
+		0 - out_current0 (backlight 0)
+		1 - out_current1 (backlight 1)
+
+What:		/sys/class/backlight/<backlight>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/backlight/<backlight>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this backlight (0, 1).
+
+What:		/sys/class/backlight/<backlight>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/backlight/<backlight>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

linux-imx/Documentation/ABI/testing/sysfs-class-bdi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-bdi b/linux-imx/Documentation/ABI/testing/sysfs-class-bdi
new file mode 100644
index 0000000..d773d56
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-bdi
@@ -0,0 +1,55 @@
+What:		/sys/class/bdi/<bdi>/
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+
+Provide a place in sysfs for the backing_dev_info object.  This allows
+setting and retrieving various BDI specific variables.
+
+The <bdi> identifier can be either of the following:
+
+MAJOR:MINOR
+
+	Device number for block devices, or value of st_dev on
+	non-block filesystems which provide their own BDI, such as NFS
+	and FUSE.
+
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
+default
+
+	The default backing dev, used for non-block device backed
+	filesystems which do not provide their own BDI.
+
+Files under /sys/class/bdi/<bdi>/
+---------------------------------
+
+read_ahead_kb (read-write)
+
+	Size of the read-ahead window in kilobytes
+
+min_ratio (read-write)
+
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device.
+	For example, this is useful for providing a minimum QoS.
+
+max_ratio (read-write)
+
+	Allows limiting a particular device to use not more than the
+	given percentage of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, or a FUSE mount which cannot
+	be trusted to play fair.
+
+stable_pages_required (read-only)
+
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.

linux-imx/Documentation/ABI/testing/sysfs-class-devfreq

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-devfreq b/linux-imx/Documentation/ABI/testing/sysfs-class-devfreq
new file mode 100644
index 0000000..0ba6ea2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-devfreq
@@ -0,0 +1,80 @@
+What:		/sys/class/devfreq/.../
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq objects.
+		This allows accessing various devfreq specific variables.
+		The name of devfreq object denoted as ... is same as the
+		name of device using devfreq.
+
+What:		/sys/class/devfreq/.../governor
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../governor show or set the name of the
+		governor used by the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../cur_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../cur_freq shows the current
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
+
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
+Description:
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../polling_interval
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../polling_interval shows and sets
+		the requested polling interval of the corresponding devfreq
+		object. The values are represented in ms. If the value is
+		less than 1 jiffy, it is considered to be 0, which means
+		no polling. This value is meaningless if the governor is
+		not polling; thus. If the governor is not using
+		devfreq-provided central polling
+		(/sys/class/devfreq/.../central_polling is 0), this value
+		may be useless.
+
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+		This ABI shows the statistics of devfreq behavior on a
+		specific device. It shows the time spent in each state and
+		the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile.
+
+What:		/sys/class/devfreq/.../userspace/set_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../userspace/set_freq shows and
+		sets the requested frequency for the devfreq object if
+		userspace governor is in effect.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.

linux-imx/Documentation/ABI/testing/sysfs-class-extcon

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-extcon b/linux-imx/Documentation/ABI/testing/sysfs-class-extcon
new file mode 100644
index 0000000..57a7262
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-extcon
@@ -0,0 +1,97 @@
+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simultaneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overridden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this:
+		# cat state
+		USB_OTG=1
+		HDMI=0
+		TA=1
+		EAR_JACK=0
+		#
+		In this example, the extcon device has USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x:
+		# echo 0xHEX > state
+
+		This updates the whole state of the extcon device.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive conditions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to set the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.x/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows the name of cable
+		"x" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.x/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/state shows and stores the
+		state of cable "x" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is:
+		# ls mutually_exclusive/
+		0x3
+		0x5
+		0xc
+		#
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.

linux-imx/Documentation/ABI/testing/sysfs-class-lcd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-lcd b/linux-imx/Documentation/ABI/testing/sysfs-class-lcd
new file mode 100644
index 0000000..35906bf
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-lcd
@@ -0,0 +1,23 @@
+What:		/sys/class/lcd/<lcd>/lcd_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control LCD power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+
+What:		/sys/class/lcd/<lcd>/contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Current contrast of this LCD device. Value is between 0 and
+		/sys/class/lcd/<lcd>/max_contrast.
+
+What:		/sys/class/lcd/<lcd>/max_contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum contrast for this LCD device.

linux-imx/Documentation/ABI/testing/sysfs-class-led

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-led b/linux-imx/Documentation/ABI/testing/sysfs-class-led
new file mode 100644
index 0000000..3646ec8
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-led
@@ -0,0 +1,37 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the brightness of the LED. Most LEDs don't
+		have hardware brightness support so will just be turned on for
+		non-zero brightness settings. The value is between 0 and
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/max_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness level for this led, default is 255 (LED_FULL).
+
+What:		/sys/class/leds/<led>/trigger
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the trigger for this LED. A trigger is a kernel based source
+		of led events.
+		You can change triggers in a similar manner to the way an IO
+		scheduler is chosen. Trigger specific parameters can appear in
+		/sys/class/leds/<led> once a given trigger is selected.
+
+What:		/sys/class/leds/<led>/inverted
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Invert the LED on/off state. This parameter is specific to
+		gpio and backlight triggers. In case of the backlight trigger,
+		it is useful when driving a LED which is intended to indicate
+		a device in a standby like state.

linux-imx/Documentation/ABI/testing/sysfs-class-led-driver-lm3533

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/linux-imx/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
new file mode 100644
index 0000000..620ebb3
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-led-driver-lm3533
@@ -0,0 +1,65 @@
+What:		/sys/class/leds/<led>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the ALS output channel to use as input in
+		ALS-current-control mode (1, 2), where
+
+		1 - out_current1
+		2 - out_current2
+
+What:		/sys/class/leds/<led>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/leds/<led>/falltime
+What:		/sys/class/leds/<led>/risetime
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the pattern generator fall and rise times (0..7), where
+
+		0 - 2048 us
+		1 - 262 ms
+		2 - 524 ms
+		3 - 1.049 s
+		4 - 2.097 s
+		5 - 4.194 s
+		6 - 8.389 s
+		7 - 16.78 s
+
+What:		/sys/class/leds/<led>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this led (0..3).
+
+What:		/sys/class/leds/<led>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/leds/<led>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

linux-imx/Documentation/ABI/testing/sysfs-class-mtd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-mtd b/linux-imx/Documentation/ABI/testing/sysfs-class-mtd
new file mode 100644
index 0000000..1399bb2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-mtd
@@ -0,0 +1,186 @@
+What:		/sys/class/mtd/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The mtd/ class subdirectory belongs to the MTD subsystem
+		(MTD core).
+
+What:		/sys/class/mtd/mtdX/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
+		to each /dev/mtdX character device.  These may represent
+		physical/simulated flash devices, partitions on a flash
+		device, or concatenated flash devices.
+
+What:		/sys/class/mtd/mtdXro/
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		These directories provide the corresponding read-only device
+		nodes for /sys/class/mtd/mtdX/ .
+
+What:		/sys/class/mtd/mtdX/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to this MTD device (in <major>:<minor> format).  This is the
+		read-write device so <minor> will be even.
+
+What:		/sys/class/mtd/mtdXro/dev
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Major and minor numbers of the character device corresponding
+		to the read-only variant of thie MTD device (in
+		<major>:<minor> format).  In this case <minor> will be odd.
+
+What:		/sys/class/mtd/mtdX/erasesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		"Major" erase size for the device.  If numeraseregions is
+		zero, this is the eraseblock size for the entire device.
+		Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
+		can be used to determine the actual eraseblock layout.
+
+What:		/sys/class/mtd/mtdX/flags
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A hexadecimal value representing the device flags, ORed
+		together:
+
+		0x0400: MTD_WRITEABLE - device is writable
+		0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
+		0x1000: MTD_NO_ERASE - no erase necessary
+		0x2000: MTD_POWERUP_LOCK - always locked after reset
+
+What:		/sys/class/mtd/mtdX/name
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		A human-readable ASCII name for the device or partition.
+		This will match the name in /proc/mtd .
+
+What:		/sys/class/mtd/mtdX/numeraseregions
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		For devices that have variable eraseblock sizes, this
+		provides the total number of erase regions.  Otherwise,
+		it will read back as zero.
+
+What:		/sys/class/mtd/mtdX/oobsize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Number of OOB bytes per page.
+
+What:		/sys/class/mtd/mtdX/size
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Total size of the device/partition, in bytes.
+
+What:		/sys/class/mtd/mtdX/type
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		One of the following ASCII strings, representing the device
+		type:
+
+		absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
+
+What:		/sys/class/mtd/mtdX/writesize
+Date:		April 2009
+KernelVersion:	2.6.29
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Minimal writable flash unit size.  This will always be
+		a positive integer.
+
+		In the case of NOR flash it is 1 (even though individual
+		bits can be cleared).
+
+		In the case of NAND flash it is one NAND page (or a
+		half page, or a quarter page).
+
+		In the case of ECC NOR, it is the ECC block size.
+
+What:		/sys/class/mtd/mtdX/ecc_strength
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Maximum number of bit errors that the device is capable of
+		correcting within each region covering an ECC step (see
+		ecc_step_size).  This will always be a non-negative integer.
+
+		In the case of devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bitflip_threshold
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		This allows the user to examine and adjust the criteria by which
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
+
+		The initial value may be specified by the flash device driver.
+		If not, then the default value is ecc_strength.
+
+		The introduction of this feature brings a subtle change to the
+		meaning of the -EUCLEAN return code.  Previously, it was
+		interpreted to mean simply "one or more bit errors were
+		corrected".  Its new interpretation can be phrased as "a
+		dangerously high number of bit errors were corrected on one or
+		more regions comprising an ecc step".  The precise definition of
+		"dangerously high" can be adjusted by the user with
+		bitflip_threshold.  Users are discouraged from doing this,
+		however, unless they know what they are doing and have intimate
+		knowledge of the properties of their device.  Broadly speaking,
+		bitflip_threshold should be low enough to detect genuine erase
+		block degradation, but high enough to avoid the consequences of
+		a persistent return value of -EUCLEAN on devices where sticky
+		bitflips occur.  Note that if bitflip_threshold exceeds
+		ecc_strength, -EUCLEAN is never returned by the read operations.
+		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+		returned, absent a hard error.
+
+		This is generally applicable only to NAND flash devices with ECC
+		capability.  It is ignored on devices lacking ECC capability;
+		i.e., devices for which ecc_strength is zero.
+
+What:		/sys/class/mtd/mtdX/ecc_step_size
+Date:		May 2013
+KernelVersion:	3.10
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The size of a single region covered by ECC, known as the ECC
+		step.  Devices may have several equally sized ECC steps within
+		each writesize region.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.

linux-imx/Documentation/ABI/testing/sysfs-class-net-batman-adv

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-net-batman-adv b/linux-imx/Documentation/ABI/testing/sysfs-class-net-batman-adv
new file mode 100644
index 0000000..bdc0070
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -0,0 +1,15 @@
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+

linux-imx/Documentation/ABI/testing/sysfs-class-net-grcan

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-net-grcan b/linux-imx/Documentation/ABI/testing/sysfs-class-net-grcan
new file mode 100644
index 0000000..f418c92
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-net-grcan
@@ -0,0 +1,35 @@
+
+What:		/sys/class/net/<iface>/grcan/enable0
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 0. This file reads
+		and writes the "Enable 0" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable0 and can be read at
+		/sys/module/grcan/parameters/enable0.
+
+What:		/sys/class/net/<iface>/grcan/enable1
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 1. This file reads
+		and writes the "Enable 1" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable1 and can be read at
+		/sys/module/grcan/parameters/enable1.
+
+What:		/sys/class/net/<iface>/grcan/select
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Configuration of which physical interface to be used. Possible
+		values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
+		library documentation for details. The default value is 0 or is
+		set by the module parameter grcan.select and can be read at
+		/sys/module/grcan/parameters/select.

linux-imx/Documentation/ABI/testing/sysfs-class-net-mesh

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-net-mesh b/linux-imx/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 0000000..bdcd8b4
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,101 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <ordex@autistici.org>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
+Date:           November 2011
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the bridge loop avoidance feature
+                is enabled. This feature detects and avoids loops
+                between the mesh and devices bridged with the soft
+                interface <mesh_iface>.
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
+
+What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Each batman node only maintains information about its
+                own local neighborhood, therefore generating graphs
+                showing the topology of the entire mesh is not easily
+                feasible without having a central instance to collect
+                the local topologies from all nodes. This file allows
+                to activate the collecting (server) mode.

linux-imx/Documentation/ABI/testing/sysfs-class-pktcdvd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-pktcdvd b/linux-imx/Documentation/ABI/testing/sysfs-class-pktcdvd
new file mode 100644
index 0000000..b1c3f02
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-pktcdvd
@@ -0,0 +1,72 @@
+What:           /sys/class/pktcdvd/
+Date:           Oct. 2006
+KernelVersion:  2.6.20
+Contact:        Thomas Maier <balagi@justmail.de>
+Description:
+
+sysfs interface
+---------------
+
+The pktcdvd module (packet writing driver) creates
+these files in the sysfs:
+(<devid> is in format  major:minor )
+
+/sys/class/pktcdvd/
+    add            (0200)  Write a block device id (major:minor)
+                           to create a new pktcdvd device and map
+                           it to the block device.
+
+    remove         (0200)  Write the pktcdvd device id (major:minor)
+                           to it to remove the pktcdvd device.
+
+    device_map     (0444)  Shows the device mapping in format:
+                             pktcdvd[0-7] <pktdevid> <blkdevid>
+
+/sys/class/pktcdvd/pktcdvd[0-7]/
+    dev                   (0444) Device id
+    uevent                (0200) To send an uevent.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/stat/
+    packets_started       (0444) Number of started packets.
+    packets_finished      (0444) Number of finished packets.
+
+    kb_written            (0444) kBytes written.
+    kb_read               (0444) kBytes read.
+    kb_read_gather        (0444) kBytes read to fill write packets.
+
+    reset                 (0200) Write any value to it to reset
+                                 pktcdvd device statistic values, like
+                                 bytes read/written.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/
+    size                  (0444) Contains the size of the bio write
+                                 queue.
+
+    congestion_off        (0644) If bio write queue size is below
+                                 this mark, accept new bio requests
+                                 from the block layer.
+
+    congestion_on         (0644) If bio write queue size is higher
+                                 as this mark, do no longer accept
+                                 bio write requests from the block
+                                 layer and wait till the pktcdvd
+                                 device has processed enough bio's
+                                 so that bio write queue size is
+                                 below congestion off mark.
+                                 A value of <= 0 disables congestion
+                                 control.
+
+
+Example:
+--------
+To use the pktcdvd sysfs interface directly, you can do:
+
+# create a new pktcdvd device mapped to /dev/hdc
+echo "22:0" >/sys/class/pktcdvd/add
+cat /sys/class/pktcdvd/device_map
+# assuming device pktcdvd0 was created, look at stat's
+cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
+# print the device id of the mapped block device
+fgrep pktcdvd0 /sys/class/pktcdvd/device_map
+# remove device, using pktcdvd0 device id   253:0
+echo "253:0" >/sys/class/pktcdvd/remove

linux-imx/Documentation/ABI/testing/sysfs-class-power

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-power b/linux-imx/Documentation/ABI/testing/sysfs-class-power
new file mode 100644
index 0000000..78c7bac
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-power
@@ -0,0 +1,20 @@
+What:		/sys/class/power/ds2760-battery.*/charge_now
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the current
+		coloumb counter value inside the battery monitor chip. This
+		is needed for unavoidable corrections of aging batteries.
+		A userspace daemon can monitor the battery charging logic
+		and once the counter drops out of considerable bounds, take
+		appropriate action.
+
+What:		/sys/class/power/ds2760-battery.*/charge_full
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the assumed
+		battery 'full level'. As batteries age, this value has to be
+		amended over time.

linux-imx/Documentation/ABI/testing/sysfs-class-pwm

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-pwm b/linux-imx/Documentation/ABI/testing/sysfs-class-pwm
new file mode 100644
index 0000000..c479d77
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-pwm
@@ -0,0 +1,79 @@
+What:		/sys/class/pwm/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The pwm/ class sub-directory belongs to the Generic PWM
+		Framework and provides a sysfs interface for using PWM
+		channels.
+
+What:		/sys/class/pwm/pwmchipN/
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN directory is created for each
+		probed PWM controller/chip where N is the base of the
+		PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/npwm
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		The number of PWM channels supported by the PWM chip.
+
+What:		/sys/class/pwm/pwmchipN/export
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Exports a PWM channel from the PWM chip for sysfs control.
+		Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1.
+
+What:		/sys/class/pwm/pwmchipN/unexport
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Unexports a PWM channel.
+
+What:		/sys/class/pwm/pwmchipN/pwmX
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		A /sys/class/pwm/pwmchipN/pwmX directory is created for
+		each exported PWM channel where X is the exported PWM
+		channel number.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/period
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal period in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/duty_cycle
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the PWM signal duty cycle in nanoseconds.
+
+What:		/sys/class/pwm/pwmchipN/pwmX/polarity
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Sets the output polarity of the PWM signal to "normal" or
+		"inversed".
+
+What:		/sys/class/pwm/pwmchipN/pwmX/enable
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
+Description:
+		Enable/disable the PWM signal.
+		0 is disabled
+		1 is enabled

linux-imx/Documentation/ABI/testing/sysfs-class-regulator

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-regulator b/linux-imx/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 0000000..bc578bc
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,372 @@
+What:		/sys/class/regulator/.../state
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator output is ON and is supplying
+		power to the system (assuming no error prevents it).
+
+		'disabled' means the regulator output is OFF and is not
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.
+
+		NOTE: this field can be used in conjunction with microvolts
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			off
+			on
+			error
+			fast
+			normal
+			idle
+			standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
+
+
+What:		/sys/class/regulator/.../type
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		type. This holds the regulator type.
+
+		This will be one of the following strings:
+
+		'voltage'
+		'current'
+		'unknown'
+
+		'voltage' means the regulator output voltage can be controlled
+		by software.
+
+		'current' means the regulator output current limit can be
+		controlled by software.
+
+		'unknown' means software cannot control either voltage or
+		current limit.
+
+
+What:		/sys/class/regulator/.../microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microvolts. This holds the regulator output voltage setting
+		measured in microvolts (i.e. E-6 Volts), for regulators
+		which can report the control input for voltage.
+
+		NOTE: This value should not be used to determine the regulator
+		output voltage level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		microamps. This holds the regulator output current limit
+		setting measured in microamps (i.e. E-6 Amps), for regulators
+		which can report the control input for a current limit.
+
+		NOTE: This value should not be used to determine the regulator
+		output current level as this value is the same regardless of
+		whether the regulator is enabled or disabled.
+
+
+What:		/sys/class/regulator/.../opmode
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		opmode. This holds the current regulator operating mode,
+		for regulators which can report that control input value.
+
+		The opmode value can be one of the following strings:
+
+		'fast'
+		'normal'
+		'idle'
+		'standby'
+		'unknown'
+
+		The modes are described in include/linux/regulator/consumer.h
+
+		NOTE: This value should not be used to determine the regulator
+		output operating mode as this value is the same regardless of
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
+
+
+What:		/sys/class/regulator/.../min_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microvolts. This holds the minimum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microvolts
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microvolts. This holds the maximum safe working regulator
+		output voltage setting for this domain measured in microvolts,
+		for regulators which support voltage constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microvolts constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../min_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		min_microamps. This holds the minimum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no min microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../max_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		max_microamps. This holds the maximum safe working regulator
+		output current limit setting for this domain measured in
+		microamps, for regulators which support current constraints.
+
+		NOTE: this will return the string 'constraint not defined' if
+		the power domain has no max microamps constraint defined by
+		platform code.
+
+
+What:		/sys/class/regulator/.../name
+Date:		October 2008
+KernelVersion:	2.6.28
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		name. This holds a string identifying the regulator for
+		display purposes.
+
+		NOTE: this will be empty if no suitable name is provided
+		by platform or regulator drivers.
+
+
+What:		/sys/class/regulator/.../num_users
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Each regulator directory will contain a field called
+		num_users. This holds the number of consumer devices that
+		have called regulator_enable() on this regulator.
+
+
+What:		/sys/class/regulator/.../requested_microamps
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		requested_microamps. This holds the total requested load
+		current in microamps for this regulator from all its consumer
+		devices.
+
+
+What:		/sys/class/regulator/.../parent
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a link called parent.
+		This points to the parent or supply regulator if one exists.
+
+What:		/sys/class/regulator/.../suspend_mem_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to memory, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to disk, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_microvolts
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_microvolts. This holds the regulator output
+		voltage setting for this domain measured in microvolts when
+		the system is suspended to standby, for voltage regulators
+		implementing suspend voltage configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		memory, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_disk_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to disk,
+		for regulators implementing suspend mode configuration
+		constraints.
+
+What:		/sys/class/regulator/.../suspend_standby_mode
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_mode. This holds the regulator operating mode
+		setting for this domain when the system is suspended to
+		standby, for regulators implementing suspend mode
+		configuration constraints.
+
+What:		/sys/class/regulator/.../suspend_mem_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_mem_state. This holds the regulator operating state
+		when suspended to memory, for regulators implementing suspend
+		configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_disk_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_disk_state. This holds the regulator operating state
+		when suspended to disk, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../suspend_standby_state
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
+Description:
+		Some regulator directories will contain a field called
+		suspend_standby_state. This holds the regulator operating
+		state when suspended to standby, for regulators implementing
+		suspend configuration constraints.
+
+		This will be one of the same strings reported by
+		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.

linux-imx/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/linux-imx/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
new file mode 100644
index 0000000..4cf1e72
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
@@ -0,0 +1,12 @@
+What:           Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+Date:           Oct 2011
+KernelVersion:  3.0
+Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
+Description:    The rtc_calibration attribute allows the userspace to
+                calibrate the AB8500.s 32KHz Real Time Clock.
+                Every 60 seconds the AB8500 will correct the RTC's value
+                by adding to it the value of this attribute.
+                The range of the attribute is -127 to +127 in units of
+                30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+                daemon uses this interface.

linux-imx/Documentation/ABI/testing/sysfs-class-scsi_host

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-scsi_host b/linux-imx/Documentation/ABI/testing/sysfs-class-scsi_host
new file mode 100644
index 0000000..29a4f89
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.

linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc b/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc
new file mode 100644
index 0000000..6a5fd07
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -0,0 +1,146 @@
+What:           /sys/class/uwb_rc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Interfaces for WiMedia Ultra Wideband Common Radio
+                Platform (UWB) radio controllers.
+
+                Familiarity with the ECMA-368 'High Rate Ultra
+                Wideband MAC and PHY Specification' is assumed.
+
+What:           /sys/class/uwb_rc/beacon_timeout_ms
+Date:           July 2008
+KernelVersion:  2.6.27
+Description:
+                If no beacons are received from a device for at least
+                this time, the device will be considered to have gone
+                and it will be removed.  The default is 3 superframes
+                (~197 ms) as required by the specification.
+
+What:           /sys/class/uwb_rc/uwbN/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                An individual UWB radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/beacon
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel>
+
+                to force a specific channel to be used when beaconing,
+                or, if <channel> is -1, to prohibit beaconing.  If
+                <channel> is 0, then the default channel selection
+                algorithm will be used.  Valid channels depends on the
+                radio controller's supported band groups.
+
+                Reading returns the currently active channel, or -1 if
+                the radio controller is not beaconing.
+
+What:           /sys/class/uwb_rc/uwbN/scan
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel> <type> [<bpst offset>]
+
+                to start (or stop) scanning on a channel.  <type> is one of:
+                    0 - scan
+                    1 - scan outside BP
+                    2 - scan while inactive
+                    3 - scanning disabled
+                    4 - scan (with start time of <bpst offset>)
+
+What:           /sys/class/uwb_rc/uwbN/mac_address
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The EUI-48, in colon-separated hex octets, for this
+                radio controller.  A write will change the radio
+                controller's EUI-48 but only do so while the device is
+                not beaconing or scanning.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A symlink to the device (if any) of the WUSB Host
+                Controller PAL using this radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A neighbour UWB device that has either been detected
+                as part of a scan or is a member of the radio
+                controllers beacon group.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The time (using the radio controllers internal 1 ms
+                interval superframe timer) of the last beacon from
+                this device was received.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The current DevAddr of this device in colon separated
+                hex octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+                The EUI-48 of this device in colon separated hex
+                octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/IEs
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The latest IEs included in this device's beacon, in
+                space separated hex octets with one IE per line.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/LQE
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Link Quality Estimate - the Signal to Noise Ratio
+                (SNR) of all packets received from this device in dB.
+                This gives an estimate on a suitable PHY rate. Refer
+                to [ECMA-368] section 13.3 for more details.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Received Signal Strength Indication - the strength of
+                the received signal in dB.  LQE is a more useful
+                measure of the radio link quality.

linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
new file mode 100644
index 0000000..25b1e75
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -0,0 +1,38 @@
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write the CHID (16 space-separated hex octets) for this host controller.
+                This starts the host controller, allowing it to accept connection from
+                WUSB devices.
+
+                Set an all zero CHID to stop the host controller.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Devices that haven't sent a WUSB packet to the host
+                within 'wusb_trust_timeout' ms are considered to have
+                disconnected and are removed.  The default value of
+                4000 ms is the value required by the WUSB
+                specification.
+
+                Since this relates to security (specifically, the
+                lifetime of PTKs and GTKs) it should not be changed
+                from the default.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+Date:           August 2009
+KernelVersion:  2.6.32
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The maximum PHY rate to use for all connected devices.
+                This is only of limited use for testing and
+                development as the hardware's automatic rate
+                adaptation is better then this simple control.
+
+                Refer to [ECMA-368] section 10.3.1.1 for the value to
+                use.

linux-imx/Documentation/ABI/testing/sysfs-dev

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-dev b/linux-imx/Documentation/ABI/testing/sysfs-dev
new file mode 100644
index 0000000..a9f2b8b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-dev
@@ -0,0 +1,20 @@
+What:		/sys/dev
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Dan Williams <dan.j.williams@intel.com>
+Description:	The /sys/dev tree provides a method to look up the sysfs
+		path for a device using the information returned from
+		stat(2).  There are two directories, 'block' and 'char',
+		beneath /sys/dev containing symbolic links with names of
+		the form "<major>:<minor>".  These links point to the
+		corresponding sysfs path for the given device.
+
+		Example:
+		$ readlink /sys/dev/block/8:32
+		../../block/sdc
+
+		Entries in /sys/dev/char and /sys/dev/block will be
+		dynamically created and destroyed as devices enter and
+		leave the system.
+
+Users:		mdadm <linux-raid@vger.kernel.org>

linux-imx/Documentation/ABI/testing/sysfs-devices

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices b/linux-imx/Documentation/ABI/testing/sysfs-devices
new file mode 100644
index 0000000..5fcc943
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices
@@ -0,0 +1,25 @@
+What:		/sys/devices
+Date:		February 2006
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		The /sys/devices tree contains a snapshot of the
+		internal state of the kernel device tree.  Devices will
+		be added and removed dynamically as the machine runs,
+		and between different kernel versions, the layout of the
+		devices within this tree will change.
+
+		Please do not rely on the format of this tree because of
+		this.  If a program wishes to find different things in
+		the tree, please use the /sys/class structure and rely
+		on the symlinks there to point to the proper location
+		within the /sys/devices tree of the individual devices.
+		Or rely on the uevent messages to notify programs of
+		devices being added and removed from this tree to find
+		the location of those devices.
+
+		Note that sometimes not all devices along the directory
+		chain will have emitted uevent messages, so userspace
+		programs must be able to handle such occurrences.
+
+Users:
+	udev <linux-hotplug-devel@lists.sourceforge.net>

linux-imx/Documentation/ABI/testing/sysfs-devices-edac

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-edac b/linux-imx/Documentation/ABI/testing/sysfs-devices-edac
new file mode 100644
index 0000000..30ee78a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-edac
@@ -0,0 +1,140 @@
+What:		/sys/devices/system/edac/mc/mc*/reset_counters
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This write-only control file will zero all the statistical
+		counters for UE and CE errors on the given memory controller.
+		Zeroing the counters will also reset the timer indicating how
+		long since the last counter were reset. This is useful for
+		computing errors/time.  Since the counters are always reset
+		at driver initialization time, no module/kernel parameter
+		is available.
+
+What:		/sys/devices/system/edac/mc/mc*/seconds_since_reset
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays how many seconds have elapsed
+		since the last counter reset. This can be used with the error
+		counters to measure error rates.
+
+What:		/sys/devices/system/edac/mc/mc*/mc_name
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the type of memory controller
+		that is being utilized.
+
+What:		/sys/devices/system/edac/mc/mc*/size_mb
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays, in count of megabytes, of memory
+		that this memory controller manages.
+
+What:		/sys/devices/system/edac/mc/mc*/ue_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of uncorrectable
+		errors that have occurred on this memory controller. If
+		panic_on_ue is set, this counter will not have a chance to
+		increment, since EDAC will panic the system
+
+What:		/sys/devices/system/edac/mc/mc*/ue_noinfo_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the number of UEs that have
+		occurred on this memory controller with no information as to
+		which DIMM slot is having errors.
+
+What:		/sys/devices/system/edac/mc/mc*/ce_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of correctable
+		errors that have occurred on this memory controller. This
+		count is very important to examine. CEs provide early
+		indications that a DIMM is beginning to fail. This count
+		field should be monitored for non-zero values and report
+		such information to the system administrator.
+
+What:		/sys/devices/system/edac/mc/mc*/ce_noinfo_count
+Date:		January 2006
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the number of CEs that
+		have occurred on this memory controller wherewith no
+		information as to which DIMM slot is having errors. Memory is
+		handicapped, but operational, yet no information is available
+		to indicate which slot the failing memory is in. This count
+		field should be also be monitored for non-zero values.
+
+What:		/sys/devices/system/edac/mc/mc*/sdram_scrub_rate
+Date:		February 2007
+Contact:	linux-edac@vger.kernel.org
+Description:	Read/Write attribute file that controls memory scrubbing.
+		The scrubbing rate used by the memory controller is set by
+		writing a minimum bandwidth in bytes/sec to the attribute file.
+		The rate will be translated to an internal value that gives at
+		least the specified rate.
+		Reading the file will return the actual scrubbing rate employed.
+		If configuration fails or memory scrubbing is not implemented,
+		the value of the attribute file will be -1.
+
+What:		/sys/devices/system/edac/mc/mc*/max_location
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file displays the information about the last
+		available memory slot in this memory controller. It is used by
+		userspace tools in order to display the memory filling layout.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/size
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display the size of dimm or rank.
+		For dimm*/size, this is the size, in MB of the DIMM memory
+		stick. For rank*/size, this is the size, in MB for one rank
+		of the DIMM memory stick. On single rank memories (1R), this
+		is also the total size of the dimm. On dual rank (2R) memories,
+		this is half the size of the total DIMM memories.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of DRAM device is
+		being utilized on this DIMM (x1, x2, x4, x8, ...).
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of Error detection
+		and correction is being utilized. For example: S4ECD4ED would
+		mean a Chipkill with x4 DRAM.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This control file allows this DIMM to have a label assigned
+		to it. With this label in the module, when errors occur
+		the output can provide the DIMM label in the system log.
+		This becomes vital for panic events to isolate the
+		cause of the UE event.
+		DIMM Labels must be assigned after booting, with information
+		that correctly identifies the physical slot with its
+		silk screen label. This information is currently very
+		motherboard specific and determination of this information
+		must occur in userland at this time.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display the location (csrow/channel,
+		branch/channel/slot or channel/slot) of the dimm or rank.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type
+Date:		April 2012
+Contact:	Mauro Carvalho Chehab <mchehab@redhat.com>
+		linux-edac@vger.kernel.org
+Description:	This attribute file will display what type of memory is
+		currently on this csrow. Normally, either buffered or
+		unbuffered memory (for example, Unbuffered-DDR3).

linux-imx/Documentation/ABI/testing/sysfs-devices-firmware_node

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-firmware_node b/linux-imx/Documentation/ABI/testing/sysfs-devices-firmware_node
new file mode 100644
index 0000000..46badc9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-firmware_node
@@ -0,0 +1,17 @@
+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.

linux-imx/Documentation/ABI/testing/sysfs-devices-lpss_ltr

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-lpss_ltr b/linux-imx/Documentation/ABI/testing/sysfs-devices-lpss_ltr
new file mode 100644
index 0000000..ea9298d
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-lpss_ltr
@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.

linux-imx/Documentation/ABI/testing/sysfs-devices-memory

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-memory b/linux-imx/Documentation/ABI/testing/sysfs-devices-memory
new file mode 100644
index 0000000..7405de2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-memory
@@ -0,0 +1,85 @@
+What:		/sys/devices/system/memory
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The /sys/devices/system/memory contains a snapshot of the
+		internal state of the kernel memory blocks. Files could be
+		added or removed dynamically to represent hot-add/remove
+		operations.
+Users:		hotplug memory add/remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
+
+What:		/sys/devices/system/memory/memoryX/removable
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/removable
+		indicates whether this memory block is removable or not.
+		This is useful for a user-level agent to determine
+		identify removable sections of the memory before attempting
+		potentially expensive hot-remove memory operation
+Users:		hotplug memory remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
+
+What:		/sys/devices/system/memory/memoryX/phys_device
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/phys_device
+		is read-only and is designed to show the name of physical
+		memory device.  Implementation is currently incomplete.
+
+What:		/sys/devices/system/memory/memoryX/phys_index
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/phys_index
+		is read-only and contains the section ID in hexadecimal
+		which is equivalent to decimal X contained in the
+		memory section directory name.
+
+What:		/sys/devices/system/memory/memoryX/state
+Date:		September 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/state
+		is read-write.  When read, its contents show the
+		online/offline state of the memory section.  When written,
+		root can toggle the the online/offline state of a removable
+		memory section (see removable file description above)
+		using the following commands.
+		# echo online > /sys/devices/system/memory/memoryX/state
+		# echo offline > /sys/devices/system/memory/memoryX/state
+
+		For example, if /sys/devices/system/memory/memory22/removable
+		contains a value of 1 and
+		/sys/devices/system/memory/memory22/state contains the
+		string "online" the following command can be executed by
+		by root to offline that section.
+		# echo offline > /sys/devices/system/memory/memory22/state
+Users:		hotplug memory remove tools
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
+
+
+What:		/sys/devices/system/memoryX/nodeY
+Date:		October 2009
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, a symbolic link that
+		points to the corresponding NUMA node directory.
+
+		For example, the following symbolic link is created for
+		memory section 9 on node0:
+		/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+
+What:		/sys/devices/system/node/nodeX/memoryY
+Date:		September 2008
+Contact:	Gary Hade <garyhade@us.ibm.com>
+Description:
+		When CONFIG_NUMA is enabled
+		/sys/devices/system/node/nodeX/memoryY is a symbolic link that
+		points to the corresponding /sys/devices/system/memory/memoryY
+		memory section directory.  For example, the following symbolic
+		link is created for memory section 9 on node0.
+		/sys/devices/system/node/node0/memory9 -> ../../memory/memory9

linux-imx/Documentation/ABI/testing/sysfs-devices-mmc

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-mmc b/linux-imx/Documentation/ABI/testing/sysfs-devices-mmc
new file mode 100644
index 0000000..5a50ab6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-mmc
@@ -0,0 +1,21 @@
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_offset
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the start address of
+		enhanced data area. If not, this attribute will be -EINVAL.
+		Unit Byte. Format decimal.
+
+What:		/sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_size
+Date:		January 2011
+Contact:	Chuanxiao Dong <chuanxiao.dong@intel.com>
+Description:
+		Enhanced area is a new feature defined in eMMC4.4 standard.
+		eMMC4.4 or later card can support such feature. This kind of
+		area can help to improve the card performance. If the feature
+		is enabled, this attribute will indicate the size of enhanced
+		data area. If not, this attribute will be -EINVAL.
+		Unit KByte. Format decimal.

linux-imx/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
new file mode 100644
index 0000000..d548eaa
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -0,0 +1,21 @@
+What:		/sys/devices/platform/_UDC_/gadget/suspended
+Date:		April 2010
+Contact:	Fabien Chouteau <fabien.chouteau@barco.com>
+Description:
+		Show the suspend state of an USB composite gadget.
+		1 -> suspended
+		0 -> resumed
+
+		(_UDC_ is the name of the USB Device Controller driver)
+
+What:           /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date:           July 2010
+Contact:        Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+		Show or set the reaction on the FUA (Force Unit Access) bit in
+		the SCSI WRITE(10,12) commands when a gadget in USB Mass
+		Storage mode.
+
+		Possible values are:
+			1 -> ignore the FUA flag
+			0 -> obey the FUA flag

linux-imx/Documentation/ABI/testing/sysfs-devices-platform-docg3

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-docg3 b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-docg3
new file mode 100644
index 0000000..8aa3671
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-docg3
@@ -0,0 +1,34 @@
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Show whether the floor (0 to 4), protection area (0 or 1) is
+		keylocked. Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The result is:
+		0 -> the DPS is not keylocked
+		1 -> the DPS is keylocked
+Users:		None identified so far.
+
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Enter the protection key for the floor (0 to 4), protection area
+		(0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The protection key is a string of 8 bytes (value 0-255).
+		Entering the correct value toggle the lock, and can be observed
+		through f[0-3]_dps[01]_is_keylocked.
+		Possible values are:
+			- 8 bytes
+		Typical values are:
+			- "00000000"
+			- "12345678"
+Users:		None identified so far.

linux-imx/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
new file mode 100644
index 0000000..2107082
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-platform-sh_mobile_lcdc_fb
@@ -0,0 +1,44 @@
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_alpha
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the alpha blending value for the overlay. Values range
+		from 0 (transparent) to 255 (opaque). The value is ignored if
+		the mode is not set to Alpha Blending.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_mode
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Selects the composition mode for the overlay. Possible values
+		are
+
+		0 - Alpha Blending
+		1 - ROP3
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_position
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the x,y overlay position on the display in pixels. The
+		position format is `[0-9]+,[0-9]+'.
+
+What:		/sys/devices/platform/sh_mobile_lcdc_fb.[0-3]/graphics/fb[0-9]/ovl_rop3
+Date:		May 2012
+Contact:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+Description:
+		This file is only available on fb[0-9] devices corresponding
+		to overlay planes.
+
+		Stores the raster operation (ROP3) for the overlay. Values
+		range from 0 to 255. The value is ignored if the mode is not
+		set to ROP3.

linux-imx/Documentation/ABI/testing/sysfs-devices-power

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power b/linux-imx/Documentation/ABI/testing/sysfs-devices-power
new file mode 100644
index 0000000..9d43e76
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power
@@ -0,0 +1,237 @@
+What:		/sys/devices/.../power/
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power directory contains attributes
+		allowing the user space to check and modify some power
+		management related properties of given device.
+
+What:		/sys/devices/.../power/wakeup
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/wakeup attribute allows the user
+		space to check if the device is enabled to wake up the system
+		from sleep states, such as the memory sleep state (suspend to
+		RAM) and hibernation (suspend to disk), and to enable or disable
+		it to do that as desired.
+
+		Some devices support "wakeup" events, which are hardware signals
+		used to activate the system from a sleep state.  Such devices
+		have one of the following two values for the sysfs power/wakeup
+		file:
+
+		+ "enabled\n" to issue the events;
+		+ "disabled\n" not to do so;
+
+		In that cases the user space can change the setting represented
+		by the contents of this file by writing either "enabled", or
+		"disabled" to it.
+
+		For the devices that are not capable of generating system wakeup
+		events this file is not present.  In that case the device cannot
+		be enabled to wake up the system from sleep states.
+
+What:		/sys/devices/.../power/control
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/control attribute allows the user
+		space to control the run-time power management of the device.
+
+		All devices have one of the following two values for the
+		power/control file:
+
+		+ "auto\n" to allow the device to be power managed at run time;
+		+ "on\n" to prevent the device from being power managed;
+
+		The default for all devices is "auto", which means that they may
+		be subject to automatic power management, depending on their
+		drivers.  Changing this attribute to "on" prevents the driver
+		from power managing the device at run time.  Doing that while
+		the device is suspended causes it to be woken up.
+
+What:		/sys/devices/.../power/async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../async attribute allows the user space to
+		enable or diasble the device's suspend and resume callbacks to
+		be executed asynchronously (ie. in separate threads, in parallel
+		with the main suspend/resume thread) during system-wide power
+		transitions (eg. suspend to RAM, hibernation).
+
+		All devices have one of the following two values for the
+		power/async file:
+
+		+ "enabled\n" to permit the asynchronous suspend/resume;
+		+ "disabled\n" to forbid it;
+
+		The value of this attribute may be changed by writing either
+		"enabled", or "disabled" to it.
+
+		It generally is unsafe to permit the asynchronous suspend/resume
+		of a device unless it is certain that all of the PM dependencies
+		of the device are known to the PM core.  However, for some
+		devices this attribute is set to "enabled" by bus type code or
+		device drivers and in that cases it should be safe to leave the
+		default value.
+
+What:		/sys/devices/.../power/wakeup_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_count attribute contains the number
+		of signaled wakeup events associated with the device.  This
+		attribute is read-only.  If the device is not enabled to wake up
+		the system from sleep states, this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_active_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_active_count attribute contains the
+		number of times the processing of wakeup events associated with
+		the device was completed (at the kernel level).  This attribute
+		is read-only.  If the device is not enabled to wake up the
+		system from sleep states, this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_abort_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_abort_count attribute contains the
+		number of times the processing of a wakeup event associated with
+		the device might have aborted system transition into a sleep
+		state in progress.  This attribute is read-only.  If the device
+		is not enabled to wake up the system from sleep states, this
+		attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_expire_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_expire_count attribute contains the
+		number of times a wakeup event associated with the device has
+		been reported with a timeout that expired.  This attribute is
+		read-only.  If the device is not enabled to wake up the system
+		from sleep states, this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_active
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_active attribute contains either 1,
+		or 0, depending on whether or not a wakeup event associated with
+		the device is being processed (1).  This attribute is read-only.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_total_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_total_time_ms attribute contains
+		the total time of processing wakeup events associated with the
+		device, in milliseconds.  This attribute is read-only.  If the
+		device is not enabled to wake up the system from sleep states,
+		this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_max_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_max_time_ms attribute contains
+		the maximum time of processing a single wakeup event associated
+		with the device, in milliseconds.  This attribute is read-only.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_last_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_last_time_ms attribute contains
+		the value of the monotonic clock corresponding to the time of
+		signaling the last wakeup event associated with the device, in
+		milliseconds.  This attribute is read-only.  If the device is
+		not enabled to wake up the system from sleep states, this
+		attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
+		contains the total time the device has been preventing
+		opportunistic transitions to sleep states from occurring.
+		This attribute is read-only.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is not
+		present.
+
+What:		/sys/devices/.../power/autosuspend_delay_ms
+Date:		September 2010
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		The /sys/devices/.../power/autosuspend_delay_ms attribute
+		contains the autosuspend delay value (in milliseconds).  Some
+		drivers do not want their device to suspend as soon as it
+		becomes idle at run time; they want the device to remain
+		inactive for a certain minimum period of time first.  That
+		period is called the autosuspend delay.  Negative values will
+		prevent the device from being suspended at run time (similar
+		to writing "on" to the power/control attribute).  Values >=
+		1000 will cause the autosuspend timer expiration to be rounded
+		up to the nearest second.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		attempts to read or write it will yield I/O errors.
+
+What:		/sys/devices/.../power/pm_qos_latency_us
+Date:		March 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
+		contains the PM QoS resume latency limit for the given device,
+		which is the maximum allowed time it can take to resume the
+		device, after it has been suspended at run time, from a resume
+		request to the moment the device will be ready to process I/O,
+		in microseconds.  If it is equal to 0, however, this means that
+		the PM QoS resume latency may be arbitrary.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D0

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D0
new file mode 100644
index 0000000..73b77a6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D0
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_D0/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D0/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D0.  The names
+		of the links are the same as the names of the directories they
+		point to.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D1

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D1
new file mode 100644
index 0000000..30c2070
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D1
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D1/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D1/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D1.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D1.  The names
+		of the links are the same as the names of the directories they
+		point to.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D2

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D2
new file mode 100644
index 0000000..fd9d84b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D2
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D2/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D2/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D2.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D2.  The names
+		of the links are the same as the names of the directories they
+		point to.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
new file mode 100644
index 0000000..3df32c2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot
@@ -0,0 +1,14 @@
+What:		/sys/devices/.../power_resources_D3hot/
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_D3hot/ directory is only
+		present for device objects representing ACPI device nodes that
+		use ACPI power resources for power management and support ACPI
+		power state D3hot.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be in ACPI power state D3hot.  The
+		names of the links are the same as the names of the directories
+		they point to.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
new file mode 100644
index 0000000..e0588fe
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_resources_wakeup
@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.

linux-imx/Documentation/ABI/testing/sysfs-devices-power_state

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-power_state b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_state
new file mode 100644
index 0000000..7ad9546
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-power_state
@@ -0,0 +1,20 @@
+What:		/sys/devices/.../power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_state attribute is only present for
+		device objects representing ACPI device nodes that provide power
+		management methods.
+
+		If present, it contains a string representing the current ACPI
+		power state of the given device node.  Its possible values,
+		"D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state
+		names defined by the ACPI specification (ACPI 4 and above).
+
+		If the device node uses shared ACPI power resources, this state
+		determines a list of power resources required not to be turned
+		off.  However, some power resources needed by the device node in
+		higher-power (lower-number) states may also be ON because of
+		some other devices using them at the moment.
+
+		This attribute is read-only.

linux-imx/Documentation/ABI/testing/sysfs-devices-real_power_state

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-real_power_state b/linux-imx/Documentation/ABI/testing/sysfs-devices-real_power_state
new file mode 100644
index 0000000..8b3527c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-real_power_state
@@ -0,0 +1,23 @@
+What:		/sys/devices/.../real_power_state
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../real_power_state attribute is only present
+		for device objects representing ACPI device nodes that provide
+		power management methods and use ACPI power resources for power
+		management.
+
+		If present, it contains a string representing the real ACPI
+		power state of the given device node as returned by the _PSC
+		control method or inferred from the configuration of power
+		resources.  Its possible values, "D0", "D1", "D2", "D3hot", and
+		"D3cold", reflect the power state names defined by the ACPI
+		specification (ACPI 4 and above).
+
+		In some situations the value of this attribute may be different
+		from the value of the /sys/devices/.../power_state attribute for
+		the same device object.  If that happens, some shared power
+		resources used by the device node are only ON because of some
+		other devices using them at the moment.
+
+		This attribute is read-only.

linux-imx/Documentation/ABI/testing/sysfs-devices-resource_in_use

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-resource_in_use b/linux-imx/Documentation/ABI/testing/sysfs-devices-resource_in_use
new file mode 100644
index 0000000..b4a3bc5
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-resource_in_use
@@ -0,0 +1,12 @@
+What:		/sys/devices/.../resource_in_use
+Date:		January 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../resource_in_use attribute is only present
+		for device objects representing ACPI power resources.
+
+		If present, it contains a number (0 or 1) representing the
+		current status of the given power resource (0 means that the
+		resource is not in use and therefore it has been turned off).
+
+		This attribute is read-only.

linux-imx/Documentation/ABI/testing/sysfs-devices-soc

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-soc b/linux-imx/Documentation/ABI/testing/sysfs-devices-soc
new file mode 100644
index 0000000..6d9cc25
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-soc
@@ -0,0 +1,58 @@
+What:		/sys/devices/socX
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/devices/ directory contains a sub-directory for each
+		System-on-Chip (SoC) device on a running platform. Information
+		regarding each SoC can be obtained by reading sysfs files. This
+		functionality is only available if implemented by the platform.
+
+		The directory created for each SoC will also house information
+		about devices which are commonly contained in /sys/devices/platform.
+		It has been agreed that if an SoC device exists, its supported
+		devices would be better suited to appear as children of that SoC.
+
+What:		/sys/devices/socX/machine
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains the SoC machine
+		name (e.g. Ux500).
+
+What:		/sys/devices/socX/family
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains SoC family name
+		(e.g. DB8500).
+
+What:		/sys/devices/socX/soc_id
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. In the case of
+		ST-Ericsson's chips this contains the SoC serial number.
+
+What:		/sys/devices/socX/revision
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. Contains the SoC's
+		manufacturing revision number.
+
+What:		/sys/devices/socX/process
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported ST-Ericsson's silicon. Contains the
+		the process by which the silicon chip was manufactured.
+
+What:		/sys/bus/soc
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/bus/soc/ directory contains the usual sub-folders
+		expected under most buses. /sys/bus/soc/devices is of particular
+		interest, as it contains a symlink for each SoC device found on
+		the system. Each symlink points back into the aforementioned
+		/sys/devices/socX devices.

linux-imx/Documentation/ABI/testing/sysfs-devices-sun

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-sun b/linux-imx/Documentation/ABI/testing/sysfs-devices-sun
new file mode 100644
index 0000000..86be984
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-sun
@@ -0,0 +1,14 @@
+Whatt:		/sys/devices/.../sun
+Date:		October 2012
+Contact:	Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+		The file contains a Slot-unique ID which provided by the _SUN
+		method in the ACPI namespace. The value is written in Advanced
+		Configuration and Power Interface Specification as follows:
+
+		"The _SUN value is required to be unique among the slots of
+		the same type. It is also recommended that this number match
+		the slot number printed on the physical slot whenever possible."
+
+		So reading the sysfs file, we can identify a physical position
+		of the slot in the system.

linux-imx/Documentation/ABI/testing/sysfs-devices-system-cpu

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-system-cpu b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-cpu
new file mode 100644
index 0000000..2447698
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -0,0 +1,187 @@
+What:		/sys/devices/system/cpu/
+Date:		pre-git history
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		A collection of both global and individual CPU attributes
+
+		Individual CPU attributes are contained in subdirectories
+		named by the kernel's logical CPU number, e.g.:
+
+		/sys/devices/system/cpu/cpu#/
+
+What:		/sys/devices/system/cpu/kernel_max
+		/sys/devices/system/cpu/offline
+		/sys/devices/system/cpu/online
+		/sys/devices/system/cpu/possible
+		/sys/devices/system/cpu/present
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe kernel limits related to
+		hotplug. Briefly:
+
+		kernel_max: the maximum cpu index allowed by the kernel
+		configuration.
+
+		offline: cpus that are not online because they have been
+		HOTPLUGGED off or exceed the limit of cpus allowed by the
+		kernel configuration (kernel_max above).
+
+		online: cpus that are online and being scheduled.
+
+		possible: cpus that have been allocated resources and can be
+		brought online if they are present.
+
+		present: cpus that have been identified as being present in
+		the system.
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/probe
+		/sys/devices/system/cpu/release
+Date:		November 2009
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Dynamic addition and removal of CPU's.  This is not hotplug
+		removal, this is meant complete removal/addition of the CPU
+		from the system.
+
+		probe: writes to this file will dynamically add a CPU to the
+		system.  Information written to the file to add CPU's is
+		architecture specific.
+
+		release: writes to this file dynamically remove a CPU from
+		the system.  Information writtento the file to remove CPU's
+		is architecture specific.
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What:		/sys/devices/system/cpu/cpu#/topology/core_id
+		/sys/devices/system/cpu/cpu#/topology/core_siblings
+		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
+		/sys/devices/system/cpu/cpu#/topology/physical_package_id
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe a logical CPU's relationship
+		to other cores and threads in the same physical package.
+
+		One cpu# directory is created per logical CPU in the system,
+		e.g. /sys/devices/system/cpu/cpu42/.
+
+		Briefly, the files above are:
+
+		core_id: the CPU core ID of cpu#. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
+		core_siblings: internal kernel map of cpu#'s hardware threads
+		within the same physical_package_id.
+
+		core_siblings_list: human-readable list of the logical CPU
+		numbers within the same physical_package_id as cpu#.
+
+		physical_package_id: physical package id of cpu#. Typically
+		corresponds to a physical socket number, but the actual value
+		is architecture and platform dependent.
+
+		thread_siblings: internel kernel map of cpu#'s hardware
+		threads within the same core as cpu#
+
+		thread_siblings_list: human-readable list of cpu#'s hardware
+		threads within the same core as cpu#
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/cpuidle/current_driver
+		/sys/devices/system/cpu/cpuidle/current_governer_ro
+Date:		September 2007
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover cpuidle policy and mechanism
+
+		Various CPUs today support multiple idle levels that are
+		differentiated by varying exit latencies and power
+		consumption during idle.
+
+		Idle policy (governor) is differentiated from idle mechanism
+		(driver)
+
+		current_driver: displays current idle mechanism
+
+		current_governor_ro: displays current idle policy
+
+		See files in Documentation/cpuidle/ for more information.
+
+
+What:		/sys/devices/system/cpu/cpu#/cpufreq/*
+Date:		pre-git history
+Contact:	cpufreq@vger.kernel.org
+Description:	Discover and change clock speed of CPUs
+
+		Clock scaling allows you to change the clock speed of the
+		CPUs on the fly. This is a nice method to save battery
+		power, because the lower the clock speed, the less power
+		the CPU consumes.
+
+		There are many knobs to tweak in this directory.
+
+		See files in Documentation/cpu-freq/ for more information.
+
+		In particular, read Documentation/cpu-freq/user-guide.txt
+		to learn how to control the knobs.
+
+
+What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
+Date:		August 2008
+KernelVersion:	2.6.27
+Contact:	discuss@x86-64.org
+Description:	Disable L3 cache indices
+
+		These files exist in every CPU's cache/index3 directory. Each
+		cache_disable_{0,1} file corresponds to one disable slot which
+		can be used to disable a cache index. Reading from these files
+		on a processor with this functionality will return the currently
+		disabled index for that node. There is one L3 structure per
+		node, or per internal node on MCM machines. Writing a valid
+		index to one of these files will cause the specificed cache
+		index to be disabled.
+
+		All AMD processors with L3 caches provide this functionality.
+		For details, see BKDGs at
+		http://developer.amd.com/documentation/guides/Pages/default.aspx
+
+
+What:		/sys/devices/system/cpu/cpufreq/boost
+Date:		August 2012
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Processor frequency boosting control
+
+		This switch controls the boost setting for the whole system.
+		Boosting allows the CPU and the firmware to run at a frequency
+		beyound it's nominal limit.
+		More details can be found in Documentation/cpu-freq/boost.txt
+
+
+What:		/sys/devices/system/cpu/cpu#/crash_notes
+		/sys/devices/system/cpu/cpu#/crash_notes_size
+Date:		April 2013
+Contact:	kexec@lists.infradead.org
+Description:	address and size of the percpu note.
+
+		crash_notes: the physical address of the memory that holds the
+		note of cpu#.
+
+		crash_notes_size: size of the note of cpu#.

linux-imx/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
new file mode 100644
index 0000000..b82deea
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@@ -0,0 +1,22 @@
+What:           state
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The state file allows a means by which to change in and
+                out of Premium Real-Time Mode (PRTM), as well as the
+                ability to query the current state.
+                    0 => PRTM off
+                    1 => PRTM enabled
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
+What:           version
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The version file provides a means by which to query
+                the RTL table version that lives in the Extended
+                BIOS Data Area (EBDA).
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+

linux-imx/Documentation/ABI/testing/sysfs-devices-system-xen_cpu

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-devices-system-xen_cpu b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-xen_cpu
new file mode 100644
index 0000000..9ca02fb
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-devices-system-xen_cpu
@@ -0,0 +1,20 @@
+What:		/sys/devices/system/xen_cpu/
+Date:		May 2012
+Contact:	Liu, Jinsong <jinsong.liu@intel.com>
+Description:
+		A collection of global/individual Xen physical cpu attributes
+
+		Individual physical cpu attributes are contained in
+		subdirectories named by the Xen's logical cpu number, e.g.:
+		/sys/devices/system/xen_cpu/xen_cpu#/
+
+
+What:		/sys/devices/system/xen_cpu/xen_cpu#/online
+Date:		May 2012
+Contact:	Liu, Jinsong <jinsong.liu@intel.com>
+Description:
+		Interface to online/offline Xen physical cpus
+
+		When running under Xen platform, it provide user interface
+		to online/offline physical cpus, except cpu0 due to several
+		logic restrictions and assumptions.

linux-imx/Documentation/ABI/testing/sysfs-driver-hid

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid
new file mode 100644
index 0000000..b6490e1
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid
@@ -0,0 +1,10 @@
+What:		For USB devices	: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor
+		For BT devices	: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor
+		Symlink		: /sys/class/hidraw/hidraw<num>/device/report_descriptor
+Date:		Jan 2011
+KernelVersion:	2.0.39
+Contact:	Alan Ott <alan@signal11.us>
+Description:	When read, this file returns the device's raw binary HID
+		report descriptor.
+		This file cannot be written.
+Users:		HIDAPI library (http://www.signal11.us/oss/hidapi)

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd
new file mode 100644
index 0000000..57b92cb
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd
@@ -0,0 +1,38 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_to_select
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
+		is being controlled by press_speed.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/select_right
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
+		a left or right mouse button click.
+		Values are 0 or 1.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This file contains the trackpoint sensitivity.
+		Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity).
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_speed
+Date:		July 2011
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
+		Values are decimal integers from 1 (slowest) to 255 (fastest).
+

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
new file mode 100644
index 0000000..167d903
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
@@ -0,0 +1,7 @@
+What:		/sys/module/hid_logitech/drivers/hid:logitech/<dev>/range.
+Date:		July 2011
+KernelVersion:	3.2
+Contact:	Michal Malý <madcatxster@gmail.com>
+Description:	Display minimum, maximum and current range of the steering
+		wheel. Writing a value within min and max boundaries sets the
+		range of the wheel.

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-multitouch

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-multitouch b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-multitouch
new file mode 100644
index 0000000..f79839d
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-multitouch
@@ -0,0 +1,9 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/quirks
+Date:		November 2011
+Contact:	Benjamin Tissoires <benjamin.tissoires@gmail.com>
+Description:	The integer value of this attribute corresponds to the
+		quirks actually in place to handle the device's protocol.
+		When read, this attribute returns the current settings (see
+		MT_QUIRKS_* in hid-multitouch.c).
+		When written this attribute change on the fly the quirks, then
+		the protocol to handle the device.

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-picolcd

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 0000000..08579e7
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to switch the PicoLCD device between LCD
+		(firmware) and bootloader (flasher) operation modes.
+
+		Reading: returns list of available modes, the active mode being
+		enclosed in brackets ('[' and ']')
+
+		Writing: causes operation mode switch. Permitted values are
+		the non-active mode names listed when read.
+
+		Note: when switching mode the current PicoLCD HID device gets
+		disconnected and reconnects after above delay (see attribute
+		operation_mode_delay for its value).
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date:		April 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Delay PicoLCD waits before restarting in new mode when
+		operation_mode has changed.
+
+		Reading/Writing: It is expressed in ms and permitted range is
+		0..30000ms.
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to adjust defio refresh rate.
+
+		Reading: returns list of available refresh rates (expressed in Hz),
+		the active refresh rate being enclosed in brackets ('[' and ']')
+
+		Writing: accepts new refresh rate expressed in integer Hz
+		within permitted rates.
+
+		Note: As device can barely do 2 complete refreshes a second
+		it only makes sense to adjust this value if only one or two
+		tiles get changed and it's not appropriate to expect the application
+		to flush it's tiny changes explicitely at higher than default rate.
+

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-prodikeys

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 0000000..05d988c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What:		/sys/bus/hid/drivers/prodikeys/.../channel
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the midi channel to which
+		that the pc-midi keyboard will output.midi data.
+		Range: 0..15
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../sustain
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the sustain duration of a
+		note held by the pc-midi driver.
+		0 means sustain mode is disabled.
+		Range: 0..5000 (milliseconds)
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../octave
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Controls the octave shift modifier in the pc-midi driver.
+		The octave can be shifted via software up/down 2 octaves.
+		0 means the no ocatve shift.
+		Range: -2..2 (minus 2 to plus 2)
+		Type: Read/Write

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
new file mode 100644
index 0000000..55e281b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
@@ -0,0 +1,53 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/actual_profile
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-5.
+		When read, this attribute returns the number of the actual
+		profile which is also the profile that's active on device startup.
+		When written this attribute activates the selected profile
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard can store short macros with consist of 1 button with
+		several modifier keys internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 24 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns some info about the device like the
+		installed firmware version.
+		The size of the data is 8 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard lets the user deactivate 5 certain keys like the
+		windows and application keys, to protect the user from the outcome
+		of accidentally pressing them.
+		The integer value of this attribute has bits 0-4 set depending
+		on the state of the corresponding key.
+		When read, this file returns the current state of the buttons.
+		When written, the given buttons are activated/deactivated
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard has a condensed layout without num-lock key.
+		Instead it uses a mode-key which activates a gaming mode where
+		the assignment of the number block changes.
+		The integer value of this attribute ranges from 0 (OFF) to 1 (ON).
+		When read, this file returns the actual state of the key.
+		When written, the key is activated/deactivated immediately.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
new file mode 100644
index 0000000..c601d0f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
@@ -0,0 +1,153 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the actual
+		profile. This value is persistent, so its equivalent to the
+		profile that's active when the device is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the device activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 6 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile number for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock key for a specific profile. Profile number is included
+		in written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile number is included
+		in written data. The data has to be 65 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile number is included
+		in written data. The data has to be 41 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the media
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 29 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile number is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the time in secs since
+		epoch in which the last configuration took place.
+		The data has to be 20 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile number is included in written data.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 0000000..3ca3971
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,106 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_dpi
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the dpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual dpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     800
+		2     1200
+		3     1600
+		4     2000
+		5     2400
+		6     3200
+
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/firmware_version
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/profile[1-5]
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+                press of a button. A profile holds information like button
+                mappings, sensitivity, the colors of the 5 leds and light
+                effects.
+                When read, these files return the respective profile. The
+                returned data is 975 bytes in size.
+		When written, this file lets one write the respective profile
+		data back to the mouse. The data has to be 975 bytes long.
+		The mouse will reject invalid data, whereas the profile number
+		stored in the profile doesn't need to fit the number of the
+		store.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/settings
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 36 bytes and holds information like the
+		startup_profile, tcu state and calibration_data.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 36 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/startup_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1 to 5.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/tcu
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a "Tracking Control Unit" which lets the user
+		calibrate the laser power to fit the mousepad surface.
+		When read, this file returns the current state of the TCU,
+		where 0 means off and 1 means on.
+		Writing 0 in this file will switch the TCU off.
+		Writing 1 in this file will start the calibration which takes
+		around 6 seconds to complete and activates the TCU.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can be equipped with one of four supplied weights
+		ranging from 5 to 20 grams which are recognized by the mouse
+		and its value can be read out. When read, this file returns the
+		raw value returned by the mouse which eases further processing
+		in other software.
+		The values map to the weights as follows:
+
+		VALUE WEIGHT
+		0     none
+		1     5g
+		2     10g
+		3     15g
+		4     20g
+
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
new file mode 100644
index 0000000..7bd776f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -0,0 +1,96 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 77 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
+Date:		May 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
new file mode 100644
index 0000000..41a9b7f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
@@ -0,0 +1,105 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 0000000..a10404f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,49 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the active
+		profile.
+		When written, the mouse activates this profile immediately.
+		The profile that's active when powered down is the same that's
+		active when the mouse is powered on.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 23 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 16 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
new file mode 100644
index 0000000..31c6c4c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
@@ -0,0 +1,7 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date:		October 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, cpi, button and light settings can be configured.
+		When read, actual cpi setting and sensor data are returned.
+		The data has to be 8 bytes long.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 0000000..9fa9de3
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,49 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
new file mode 100644
index 0000000..f1e02a9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
@@ -0,0 +1,76 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. buttons holds informations about button layout.
+		When written, this file lets one write the respective profile
+		buttons to the mouse. The data has to be 47 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. profile holds informations like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor
+Date:		July 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a Avago ADNS-3090 sensor.
+		This file allows reading and writing of the mouse sensors registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-srws1

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-srws1 b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-srws1
new file mode 100644
index 0000000..d0eba70
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-srws1
@@ -0,0 +1,21 @@
+What:		/sys/class/leds/SRWS1::<serial>::RPM1
+What:		/sys/class/leds/SRWS1::<serial>::RPM2
+What:		/sys/class/leds/SRWS1::<serial>::RPM3
+What:		/sys/class/leds/SRWS1::<serial>::RPM4
+What:		/sys/class/leds/SRWS1::<serial>::RPM5
+What:		/sys/class/leds/SRWS1::<serial>::RPM6
+What:		/sys/class/leds/SRWS1::<serial>::RPM7
+What:		/sys/class/leds/SRWS1::<serial>::RPM8
+What:		/sys/class/leds/SRWS1::<serial>::RPM9
+What:		/sys/class/leds/SRWS1::<serial>::RPM10
+What:		/sys/class/leds/SRWS1::<serial>::RPM11
+What:		/sys/class/leds/SRWS1::<serial>::RPM12
+What:		/sys/class/leds/SRWS1::<serial>::RPM13
+What:		/sys/class/leds/SRWS1::<serial>::RPM14
+What:		/sys/class/leds/SRWS1::<serial>::RPM15
+What:		/sys/class/leds/SRWS1::<serial>::RPMALL
+Date:		Jan 2013
+KernelVersion:	3.9
+Contact:	Simon Wood <simon@mungewell.org>
+Description:	Provides a control for turning on/off the LEDs which form
+		an RPM meter on the front of the controller

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-thingm

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-thingm b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-thingm
new file mode 100644
index 0000000..abcffee
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-thingm
@@ -0,0 +1,23 @@
+What:		/sys/class/leds/blink1::<serial>/rgb
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	The ThingM blink1 is an USB RGB LED. The color notation is
+		3-byte hexadecimal. Read this attribute to get the last set
+		color. Write the 24-bit hexadecimal color to change the current
+		LED color. The default color is full white (0xFFFFFF).
+		For instance, set the color to green with: echo 00FF00 > rgb
+
+What:		/sys/class/leds/blink1::<serial>/fade
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute allows to set a fade time in milliseconds for
+		the next color change. Read the attribute to know the current
+		fade time. The default value is set to 0 (no fade time). For
+		instance, set a fade time of 2 seconds with: echo 2000 > fade
+
+What:		/sys/class/leds/blink1::<serial>/play
+Date:		January 2013
+Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+Description:	This attribute is used to play/pause the light patterns. Write 1
+		to start playing, 0 to stop. Reading this attribute returns the
+		current playing status.

linux-imx/Documentation/ABI/testing/sysfs-driver-hid-wiimote

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-wiimote
new file mode 100644
index 0000000..3d98009
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -0,0 +1,22 @@
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led1
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led2
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led3
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led4
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Description:	Make it possible to set/get current led state. Reading from it
+		returns 0 if led is off and 1 if it is on. Writing 0 to it
+		disables the led, writing 1 enables it.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/extension
+Date:		August 2011
+KernelVersion:	3.2
+Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Description:	This file contains the currently connected and initialized
+		extensions. It can be one of: none, motionp, nunchuck, classic,
+		motionp+nunchuck, motionp+classic
+		motionp is the official Nintendo Motion+ extension, nunchuck is
+		the official Nintendo Nunchuck extension and classic is the
+		Nintendo Classic Controller extension. The motionp extension can
+		be combined with the other two.

linux-imx/Documentation/ABI/testing/sysfs-driver-ppi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-ppi b/linux-imx/Documentation/ABI/testing/sysfs-driver-ppi
new file mode 100644
index 0000000..7d1435b
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-ppi
@@ -0,0 +1,70 @@
+What:		/sys/devices/pnp0/<bus-num>/ppi/
+Date:		August 2012
+Kernel Version:	3.6
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This folder includes the attributes related with PPI (Physical
+		Presence Interface). Only if TPM is supported by BIOS, this
+		folder makes sense. The folder path can be got by command
+		'find /sys/ -name 'pcrs''. For the detail information of PPI,
+		please refer to the PPI specification from
+		http://www.trustedcomputinggroup.org/
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/version
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the version of the PPI supported by the
+		platform.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/request
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the request for an operation to be
+		executed in the pre-OS environment. It is the only input from
+		the OS to the pre-OS environment. The request should be an
+		integer value range from 1 to 160, and 0 means no request.
+		This file can be read and written.
+
+What:		/sys/devices/pnp0/00:<bus-num>/ppi/response
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the response to the most recent operation
+		request it acted upon. The format is "<request> <response num>
+		: <response description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/transition_action
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the platform-specific action that should
+		take place in order to transition to the BIOS for execution of
+		a requested operation. The format is "<action num>: <action
+		description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/tcg_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the requests defined by TCG, i.e. requests from 1 to 22.
+		The format is "<request> <status num>: <status description>".
+		This attribute is only supported by PPI version 1.2+.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/vs_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the verdor specific requests, i.e. requests from 128 to
+		255. The format is same with tcg_operations. This attribute
+		is also only supported by PPI version 1.2+.
+		This file is readonly.

linux-imx/Documentation/ABI/testing/sysfs-driver-samsung-laptop

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/linux-imx/Documentation/ABI/testing/sysfs-driver-samsung-laptop
new file mode 100644
index 0000000..678819a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-samsung-laptop
@@ -0,0 +1,37 @@
+What:		/sys/devices/platform/samsung/performance_level
+Date:		January 1, 2010
+KernelVersion:	2.6.33
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:	Some Samsung laptops have different "performance levels"
+		that are can be modified by a function key, and by this
+		sysfs file.  These values don't always make a whole lot
+		of sense, but some users like to modify them to keep
+		their fans quiet at all costs.  Reading from this file
+		will show the current performance level.  Writing to the
+		file can change this value.
+			Valid options:
+				"silent"
+				"normal"
+				"overclock"
+		Note that not all laptops support all of these options.
+		Specifically, not all support the "overclock" option,
+		and it's still unknown if this value even changes
+		anything, other than making the user feel a bit better.
+
+What:		/sys/devices/platform/samsung/battery_life_extender
+Date:		December 1, 2011
+KernelVersion:	3.3
+Contact:	Corentin Chary <corentin.chary@gmail.com>
+Description:	Max battery charge level can be modified, battery cycle
+		life can be extended by reducing the max battery charge
+		level.
+		0 means normal battery mode (100% charge)
+		1 means battery life extender mode (80% charge)
+
+What:		/sys/devices/platform/samsung/usb_charge
+Date:		December 1, 2011
+KernelVersion:	3.3
+Contact:	Corentin Chary <corentin.chary@gmail.com>
+Description:	Use your USB ports to charge devices, even
+		when your laptop is powered off.
+		1 means enabled, 0 means disabled.

linux-imx/Documentation/ABI/testing/sysfs-driver-wacom

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-driver-wacom b/linux-imx/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 0000000..7fc7810
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,95 @@
+WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
+Date:		June 2012
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/oled*_img files control
+		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
+		has to contain 256 bytes (64x32 px 1 bit colour). The format
+		is the same as PBM image 62x32px without header (64 bits per
+		horizontal line, 32 lines). An example of setting OLED No. 0:
+		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
+		The attribute is read only and no local copy of the image is
+		stored.
+
+What:		/sys/class/hidraw/hidraw*/device/speed
+Date:		April 2010
+Kernel Version:	2.6.35
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/speed file controls
+		reporting speed of Wacom bluetooth tablet. Reading from
+		this file returns 1 if tablet reports in high speed mode
+		or 0 otherwise. Writing to this file one of these values
+		switches reporting speed.
+
+What:		/sys/class/leds/0005\:056A\:00BD.0001\:selector\:*/
+Date:		May 2012
+Kernel Version:	3.5
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		LED selector for Intuos4 WL. There are 4 leds, but only one LED
+		can be lit at a time. Max brightness is 127.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Attribute group for control of the status LEDs and the OLEDs.
+		This attribute group is only available for Intuos 4 M, L,
+		and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq
+		21UX2 and Cintiq 24HD (LEDs only). Therefore its presence
+		implicitly signifies the presence of said LEDs and OLEDs on the
+		tablet device.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus does not touch the tablet surface, and no
+		button is pressed on the stylus. This luminance level is
+		normally lower than the level when a button is pressed.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus touches the tablet surface, or any button is
+		pressed on the stylus.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the four (for Intuos 4
+		and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
+		24HD) status LEDs is active (0..3). The other three LEDs on the
+		same side are always inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
+Date:		September 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the left four (for Cintiq 21UX2
+		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+		the left are always inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the overall luminance level (0..15)
+		of all eight button OLED displays.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		When writing a 1024 byte raw image in Wacom Intuos 4
+		interleaving format to the file, the image shows up on Button N
+		of the device. The image is a 64x32 pixel 4-bit gray image. The
+		1024 byte binary is split up into 16x 64 byte chunks. Each 64
+		byte chunk encodes the image data for two consecutive lines on
+		the display. The low nibble of each byte contains the first
+		line, and the high nibble contains the second line.

linux-imx/Documentation/ABI/testing/sysfs-firmware-acpi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-acpi b/linux-imx/Documentation/ABI/testing/sysfs-firmware-acpi
new file mode 100644
index 0000000..ce9bee9
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -0,0 +1,196 @@
+What:		/sys/firmware/acpi/bgrt/
+Date:		January 2012
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The BGRT is an ACPI 5.0 feature that allows the OS
+		to obtain a copy of the firmware boot splash and
+		some associated metadata. This is intended to be used
+		by boot splash applications in order to interact with
+		the firmware boot splash in order to avoid jarring
+		transitions.
+
+		image: The image bitmap. Currently a 32-bit BMP.
+		status: 1 if the image is valid, 0 if firmware invalidated it.
+		type: 0 indicates image is in BMP format.
+		version: The version of the BGRT. Currently 1.
+		xoffset: The number of pixels between the left of the screen
+			 and the left edge of the image.
+		yoffset: The number of pixels between the top of the screen
+			 and the top edge of the image.
+
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
+What:		/sys/firmware/acpi/interrupts/
+Date:		February 2008
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		All ACPI interrupts are handled via a single IRQ,
+		the System Control Interrupt (SCI), which appears
+		as "acpi" in /proc/interrupts.
+
+		However, one of the main functions of ACPI is to make
+		the platform understand random hardware without
+		special driver support.  So while the SCI handles a few
+		well known (fixed feature) interrupts sources, such
+		as the power button, it can also handle a variable
+		number of a "General Purpose Events" (GPE).
+
+		A GPE vectors to a specified handler in AML, which
+		can do a anything the BIOS writer wants from
+		OS context.  GPE 0x12, for example, would vector
+		to a level or edge handler called _L12 or _E12.
+		The handler may do its business and return.
+		Or the handler may send send a Notify event
+		to a Linux device driver registered on an ACPI device,
+		such as a battery, or a processor.
+
+		To figure out where all the SCI's are coming from,
+		/sys/firmware/acpi/interrupts contains a file listing
+		every possible source, and the count of how many
+		times it has triggered.
+
+		$ cd /sys/firmware/acpi/interrupts
+		$ grep . *
+		error:	     0
+		ff_gbl_lock:	   0   enable
+		ff_pmtimer:	  0  invalid
+		ff_pwr_btn:	  0   enable
+		ff_rt_clk:	 2  disable
+		ff_slp_btn:	  0  invalid
+		gpe00:	     0	invalid
+		gpe01:	     0	 enable
+		gpe02:	   108	 enable
+		gpe03:	     0	invalid
+		gpe04:	     0	invalid
+		gpe05:	     0	invalid
+		gpe06:	     0	 enable
+		gpe07:	     0	 enable
+		gpe08:	     0	invalid
+		gpe09:	     0	invalid
+		gpe0A:	     0	invalid
+		gpe0B:	     0	invalid
+		gpe0C:	     0	invalid
+		gpe0D:	     0	invalid
+		gpe0E:	     0	invalid
+		gpe0F:	     0	invalid
+		gpe10:	     0	invalid
+		gpe11:	     0	invalid
+		gpe12:	     0	invalid
+		gpe13:	     0	invalid
+		gpe14:	     0	invalid
+		gpe15:	     0	invalid
+		gpe16:	     0	invalid
+		gpe17:	  1084	 enable
+		gpe18:	     0	 enable
+		gpe19:	     0	invalid
+		gpe1A:	     0	invalid
+		gpe1B:	     0	invalid
+		gpe1C:	     0	invalid
+		gpe1D:	     0	invalid
+		gpe1E:	     0	invalid
+		gpe1F:	     0	invalid
+		gpe_all:    1192
+		sci:	1194
+		sci_not:     0	
+
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
+
+		gpe_all - count of SCI caused by GPEs.
+
+		gpeXX - count for individual GPE source
+
+		ff_gbl_lock - Global Lock
+
+		ff_pmtimer - PM Timer
+
+		ff_pwr_btn - Power Button
+
+		ff_rt_clk - Real Time Clock
+
+		ff_slp_btn - Sleep Button
+
+		error - an interrupt that can't be accounted for above.
+
+		invalid: it's either a GPE or a Fixed Event that
+			doesn't have an event handler.
+
+		disable: the GPE/Fixed Event is valid but disabled.
+
+		enable: the GPE/Fixed Event is valid and enabled.
+
+		Root has permission to clear any of these counters.  Eg.
+		# echo 0 > gpe11
+
+		All counters can be cleared by clearing the total "sci":
+		# echo 0 > sci
+
+		None of these counters has an effect on the function
+		of the system, they are simply statistics.
+
+		Besides this, user can also write specific strings to these files
+		to enable/disable/clear ACPI interrupts in user space, which can be
+		used to debug some ACPI interrupt storm issues.
+
+		Note that only writting to VALID GPE/Fixed Event is allowed,
+		i.e. user can only change the status of runtime GPE and
+		Fixed Event with event handler installed.
+
+		Let's take power button fixed event for example, please kill acpid
+		and other user space applications so that the machine won't shutdown
+		when pressing the power button.
+		# cat ff_pwr_btn
+		0	enabled
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		3	enabled
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		3	disabled
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		3	disabled
+		# echo enable > ff_pwr_btn
+		# cat ff_pwr_btn
+		4	enabled
+		/*
+		 * this is because the status bit is set even if the enable bit is cleared,
+		 * and it triggers an ACPI fixed event when the enable bit is set again
+		 */
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		7	enabled
+		# echo disable > ff_pwr_btn
+		# press the power button for 3 times;
+		# echo clear > ff_pwr_btn	/* clear the status bit */
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		7	enabled
+

linux-imx/Documentation/ABI/testing/sysfs-firmware-dmi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-dmi b/linux-imx/Documentation/ABI/testing/sysfs-firmware-dmi
new file mode 100644
index 0000000..c78f9ab
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-dmi
@@ -0,0 +1,110 @@
+What:		/sys/firmware/dmi/
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Many machines' firmware (x86 and ia64) export DMI /
+		SMBIOS tables to the operating system.  Getting at this
+		information is often valuable to userland, especially in
+		cases where there are OEM extensions used.
+
+		The kernel itself does not rely on the majority of the
+		information in these tables being correct.  It equally
+		cannot ensure that the data as exported to userland is
+		without error either.
+
+		DMI is structured as a large table of entries, where
+		each entry has a common header indicating the type and
+		length of the entry, as well as a firmware-provided
+		'handle' that is supposed to be unique amongst all
+		entries.
+
+		Some entries are required by the specification, but many
+		others are optional.  In general though, users should
+		never expect to find a specific entry type on their
+		system unless they know for certain what their firmware
+		is doing.  Machine to machine experiences will vary.
+
+		Multiple entries of the same type are allowed.  In order
+		to handle these duplicate entry types, each entry is
+		assigned by the operating system an 'instance', which is
+		derived from an entry type's ordinal position.  That is
+		to say, if there are 'N' multiple entries with the same type
+		'T' in the DMI tables (adjacent or spread apart, it
+		doesn't matter), they will be represented in sysfs as
+		entries "T-0" through "T-(N-1)":
+
+		Example entry directories:
+
+			/sys/firmware/dmi/entries/17-0
+			/sys/firmware/dmi/entries/17-1
+			/sys/firmware/dmi/entries/17-2
+			/sys/firmware/dmi/entries/17-3
+			...
+
+		Instance numbers are used in lieu of the firmware
+		assigned entry handles as the kernel itself makes no
+		guarantees that handles as exported are unique, and
+		there are likely firmware images that get this wrong in
+		the wild.
+
+		Each DMI entry in sysfs has the common header values
+		exported as attributes:
+
+		handle	: The 16bit 'handle' that is assigned to this
+			  entry by the firmware.  This handle may be
+			  referred to by other entries.
+		length	: The length of the entry, as presented in the
+			  entry itself.  Note that this is _not the
+			  total count of bytes associated with the
+			  entry_.  This value represents the length of
+			  the "formatted" portion of the entry.  This
+			  "formatted" region is sometimes followed by
+			  the "unformatted" region composed of nul
+			  terminated strings, with termination signalled
+			  by a two nul characters in series.
+		raw	: The raw bytes of the entry. This includes the
+			  "formatted" portion of the entry, the
+			  "unformatted" strings portion of the entry,
+			  and the two terminating nul characters.
+		type	: The type of the entry.  This value is the same
+			  as found in the directory name.  It indicates
+			  how the rest of the entry should be interpreted.
+		instance: The instance ordinal of the entry for the
+			  given type.  This value is the same as found
+			  in the parent directory name.
+		position: The ordinal position (zero-based) of the entry
+			  within the entirety of the DMI entry table.
+
+		=== Entry Specialization ===
+
+		Some entry types may have other information available in
+		sysfs.  Not all types are specialized.
+
+		--- Type 15 - System Event Log ---
+
+		This entry allows the firmware to export a log of
+		events the system has taken.  This information is
+		typically backed by nvram, but the implementation
+		details are abstracted by this table.  This entry's data
+		is exported in the directory:
+
+		/sys/firmware/dmi/entries/15-0/system_event_log
+
+		and has the following attributes (documented in the
+		SMBIOS / DMI specification under "System Event Log (Type 15)":
+
+		area_length
+		header_start_offset
+		data_start_offset
+		access_method
+		status
+		change_token
+		access_method_address
+		header_format
+		per_log_type_descriptor_length
+		type_descriptors_supported_count
+
+		As well, the kernel exports the binary attribute:
+
+		raw_event_log	: The raw binary bits of the event log
+				  as described by the DMI entry.

linux-imx/Documentation/ABI/testing/sysfs-firmware-gsmi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-gsmi b/linux-imx/Documentation/ABI/testing/sysfs-firmware-gsmi
new file mode 100644
index 0000000..0faa0aa
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-gsmi
@@ -0,0 +1,58 @@
+What:		/sys/firmware/gsmi
+Date:		March 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Some servers used internally at Google have firmware
+		that provides callback functionality via explicit SMI
+		triggers.  Some of the callbacks are similar to those
+		provided by the EFI runtime services page, but due to
+		historical reasons this different entry-point has been
+		used.
+
+		The gsmi driver implements the kernel's abstraction for
+		these firmware callbacks.  Currently, this functionality
+		is limited to handling the system event log and getting
+		access to EFI-style variables stored in nvram.
+
+		Layout:
+
+		/sys/firmware/gsmi/vars:
+
+			This directory has the same layout (and
+			underlying implementation as /sys/firmware/efi/vars.
+			See Documentation/ABI/*/sysfs-firmware-efi-vars
+			for more information on how to interact with
+			this structure.
+
+		/sys/firmware/gsmi/append_to_eventlog - write-only:
+
+			This file takes a binary blob and passes it onto
+			the firmware to be timestamped and appended to
+			the system eventlog.  The binary format is
+			interpreted by the firmware and may change from
+			platform to platform.  The only kernel-enforced
+			requirement is that the blob be prefixed with a
+			32bit host-endian type used as part of the
+			firmware call.
+
+		/sys/firmware/gsmi/clear_config - write-only:
+
+			Writing any value to this file will cause the
+			entire firmware configuration to be reset to
+			"factory defaults".  Callers should assume that
+			a reboot is required for the configuration to be
+			cleared.
+
+		/sys/firmware/gsmi/clear_eventlog - write-only:
+
+			This file is used to clear out a portion/the
+			whole of the system event log.  Values written
+			should be values between 1 and 100 inclusive (in
+			ASCII) representing the fraction of the log to
+			clear.  Not all platforms support fractional
+			clearing though, and this writes to this file
+			will error out if the firmware doesn't like your
+			submitted fraction.
+
+			Callers should assume that a reboot is needed
+			for this operation to complete.

linux-imx/Documentation/ABI/testing/sysfs-firmware-log

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-log b/linux-imx/Documentation/ABI/testing/sysfs-firmware-log
new file mode 100644
index 0000000..9b58e7c
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-log
@@ -0,0 +1,7 @@
+What:		/sys/firmware/log
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		The /sys/firmware/log is a binary file that represents a
+		read-only copy of the firmware's log if one is
+		available.

linux-imx/Documentation/ABI/testing/sysfs-firmware-memmap

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-memmap b/linux-imx/Documentation/ABI/testing/sysfs-firmware-memmap
new file mode 100644
index 0000000..eca0d65
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-memmap
@@ -0,0 +1,71 @@
+What:		/sys/firmware/memmap/
+Date:		June 2008
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
+Description:
+		On all platforms, the firmware provides a memory map which the
+		kernel reads. The resources from that memory map are registered
+		in the kernel resource tree and exposed to userspace via
+		/proc/iomem (together with other resources).
+
+		However, on most architectures that firmware-provided memory
+		map is modified afterwards by the kernel itself, either because
+		the kernel merges that memory map with other information or
+		just because the user overwrites that memory map via command
+		line.
+
+		kexec needs the raw firmware-provided memory map to setup the
+		parameter segment of the kernel that should be booted with
+		kexec. Also, the raw memory map is useful for debugging. For
+		that reason, /sys/firmware/memmap is an interface that provides
+		the raw memory map to userspace.
+
+		The structure is as follows: Under /sys/firmware/memmap there
+		are subdirectories with the number of the entry as their name:
+
+			/sys/firmware/memmap/0
+			/sys/firmware/memmap/1
+			/sys/firmware/memmap/2
+			/sys/firmware/memmap/3
+			...
+
+		The maximum depends on the number of memory map entries provided
+		by the firmware. The order is just the order that the firmware
+		provides.
+
+		Each directory contains three files:
+
+		start	: The start address (as hexadecimal number with the
+			  '0x' prefix).
+		end	: The end address, inclusive (regardless whether the
+			  firmware provides inclusive or exclusive ranges).
+		type	: Type of the entry as string. See below for a list of
+			  valid types.
+
+		So, for example:
+
+			/sys/firmware/memmap/0/start
+			/sys/firmware/memmap/0/end
+			/sys/firmware/memmap/0/type
+			/sys/firmware/memmap/1/start
+			...
+
+		Currently following types exist:
+
+		  - System RAM
+		  - ACPI Tables
+		  - ACPI Non-volatile Storage
+		  - reserved
+
+		Following shell snippet can be used to display that memory
+		map in a human-readable format:
+
+		-------------------- 8< ----------------------------------------
+		  #!/bin/bash
+		  cd /sys/firmware/memmap
+		  for dir in * ; do
+		      start=$(cat $dir/start)
+		      end=$(cat $dir/end)
+		      type=$(cat $dir/type)
+		      printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
+		  done
+		-------------------- >8 ----------------------------------------

linux-imx/Documentation/ABI/testing/sysfs-firmware-sfi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-sfi b/linux-imx/Documentation/ABI/testing/sysfs-firmware-sfi
new file mode 100644
index 0000000..4be7d44
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -0,0 +1,15 @@
+What:		/sys/firmware/sfi/tables/
+Date:		May 2010
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		SFI defines a number of small static memory tables
+		so the kernel can get platform information from firmware.
+
+		The tables are defined in the latest SFI specification:
+		http://simplefirmware.org/documentation
+
+		While the tables are used by the kernel, user-space
+		can observe them this way:
+
+		# cd /sys/firmware/sfi/tables
+		# cat $TABLENAME > $TABLENAME.bin

linux-imx/Documentation/ABI/testing/sysfs-firmware-sgi_uv

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/linux-imx/Documentation/ABI/testing/sysfs-firmware-sgi_uv
new file mode 100644
index 0000000..4573fd4
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -0,0 +1,27 @@
+What:		/sys/firmware/sgi_uv/
+Date:		August 2008
+Contact:	Russ Anderson <rja@sgi.com>
+Description:
+		The /sys/firmware/sgi_uv directory contains information
+		about the SGI UV platform.
+
+		Under that directory are a number of files:
+
+			partition_id
+			coherence_id
+
+		The partition_id entry contains the partition id.
+		SGI UV systems can be partitioned into multiple physical
+		machines, which each partition running a unique copy
+		of the operating system.  Each partition will have a unique
+		partition id.  To display the partition id, use the command:
+
+			cat /sys/firmware/sgi_uv/partition_id
+
+		The coherence_id entry contains the coherence id.
+		A partitioned SGI UV system can have one or more coherence
+		domain.  The coherence id indicates which coherence domain
+		this partition is in.  To display the coherence id, use the
+		command:
+
+			cat /sys/firmware/sgi_uv/coherence_id

linux-imx/Documentation/ABI/testing/sysfs-fs-ext4

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-fs-ext4 b/linux-imx/Documentation/ABI/testing/sysfs-fs-ext4
new file mode 100644
index 0000000..c631253
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-fs-ext4
@@ -0,0 +1,111 @@
+What:		/sys/fs/ext4/<disk>/mb_stats
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		 Controls whether the multiblock allocator should
+		 collect statistics, which are shown during the unmount.
+		 1 means to collect statistics, 0 means not to collect
+		 statistics
+
+What:		/sys/fs/ext4/<disk>/mb_group_prealloc
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The multiblock allocator will round up allocation
+		requests to a multiple of this tuning parameter if the
+		stripe size is not set in the ext4 superblock
+
+What:		/sys/fs/ext4/<disk>/mb_max_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_min_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The minimum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_order2_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the minimum size for 
+		requests (as a power of 2) where the buddy cache is
+		used
+
+What:		/sys/fs/ext4/<disk>/mb_stream_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Files which have fewer blocks than this tunable
+		parameter will have their blocks allocated out of a
+		block group specific preallocation pool, so that small
+		files are packed closely together.  Each large file
+		 will have its blocks allocated out of its own unique
+		 preallocation pool.
+
+What:		/sys/fs/ext4/<disk>/inode_readahead_blks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the maximum number of
+		inode table blocks that ext4's inode table readahead
+		algorithm will pre-read into the buffer cache
+
+What:		/sys/fs/ext4/<disk>/delayed_allocation_blocks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of blocks
+		that are dirty in the page cache, but which do not
+		have their location in the filesystem allocated yet.
+
+What:		/sys/fs/ext4/<disk>/lifetime_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of kilobytes
+		of data that have been written to this filesystem since it was
+		created.
+
+What:		/sys/fs/ext4/<disk>/session_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of
+		kilobytes of data that have been written to this
+		filesystem since it was mounted.
+
+What:		/sys/fs/ext4/<disk>/inode_goal
+Date:		June 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which (if non-zero) controls the goal
+		inode used by the inode allocator in preference to
+		all other allocation heuristics.  This is intended for
+		debugging use only, and should be 0 on production
+		systems.
+
+What:		/sys/fs/ext4/<disk>/max_writeback_mb_bump
+Date:		September 2009
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of megabytes the writeback code will
+		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).

linux-imx/Documentation/ABI/testing/sysfs-gpio

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-gpio b/linux-imx/Documentation/ABI/testing/sysfs-gpio
new file mode 100644
index 0000000..80f4c94
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-gpio
@@ -0,0 +1,27 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	    /edge ... r/w as: none, falling, rising, both
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+

linux-imx/Documentation/ABI/testing/sysfs-i2c-bmp085

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-i2c-bmp085 b/linux-imx/Documentation/ABI/testing/sysfs-i2c-bmp085
new file mode 100644
index 0000000..585962a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-i2c-bmp085
@@ -0,0 +1,31 @@
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/pressure0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Start a pressure measurement and read the result. Values
+		represent the ambient air pressure in pascal (0.01 millibar).
+
+		Reading: returns the current air pressure.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/temp0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Measure the ambient temperature. The returned value represents
+		the ambient temperature in units of 0.1 degree celsius.
+
+		Reading: returns the current temperature.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/oversampling
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Tell the bmp085 to use more samples to calculate a pressure
+		value. When writing to this file the chip will use 2^x samples
+		to calculate the next pressure value with x being the value
+		written. Using this feature will decrease RMS noise and
+		increase the measurement time.
+
+		Reading: returns the current oversampling setting.
+
+		Writing: sets a new oversampling setting.
+		Accepted values: 0..3.

linux-imx/Documentation/ABI/testing/sysfs-ibft

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-ibft b/linux-imx/Documentation/ABI/testing/sysfs-ibft
new file mode 100644
index 0000000..c2b7d11
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-ibft
@@ -0,0 +1,23 @@
+What:		/sys/firmware/ibft/initiator
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/initiator directory will contain
+		files that expose the iSCSI Boot Firmware Table initiator data.
+		Usually this contains the Initiator name.
+
+What:		/sys/firmware/ibft/targetX
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/targetX directory will contain
+		files that expose the iSCSI Boot Firmware Table target data.
+		Usually this contains the target's IP address, boot LUN,
+		target name, and what NIC it is associated with. It can also
+		contain the CHAP name (and password), the reverse CHAP
+		name (and password)
+
+What:		/sys/firmware/ibft/ethernetX
+Date:		November 2007
+Contact:	Konrad Rzeszutek <ketuzsezr@darnok.org>
+Description:	The /sys/firmware/ibft/ethernetX directory will contain
+		files that expose the iSCSI Boot Firmware Table NIC data.
+		This can this can the IP address, MAC, and gateway of the NIC.

linux-imx/Documentation/ABI/testing/sysfs-kernel-fscaps

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-fscaps b/linux-imx/Documentation/ABI/testing/sysfs-kernel-fscaps
new file mode 100644
index 0000000..50a3033
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-fscaps
@@ -0,0 +1,8 @@
+What:		/sys/kernel/fscaps
+Date:		February 2011
+KernelVersion:	2.6.38
+Contact:	Ludwig Nussel <ludwig.nussel@suse.de>
+Description
+		Shows whether file system capabilities are honored
+		when executing a binary
+

linux-imx/Documentation/ABI/testing/sysfs-kernel-iommu_groups

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/linux-imx/Documentation/ABI/testing/sysfs-kernel-iommu_groups
new file mode 100644
index 0000000..9b31556
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -0,0 +1,14 @@
+What:		/sys/kernel/iommu_groups/
+Date:		May 2012
+KernelVersion:	v3.5
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:	/sys/kernel/iommu_groups/ contains a number of sub-
+		directories, each representing an IOMMU group.  The
+		name of the sub-directory matches the iommu_group_id()
+		for the group, which is an integer value.  Within each
+		subdirectory is another directory named "devices" with
+		links to the sysfs devices contained in this group.
+		The group directory also optionally contains a "name"
+		file if the IOMMU driver has chosen to register a more
+		common name for the group.
+Users:

linux-imx/Documentation/ABI/testing/sysfs-kernel-mm

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm
new file mode 100644
index 0000000..190d523
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm
@@ -0,0 +1,6 @@
+What:		/sys/kernel/mm
+Date:		July 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
+Description:
+		/sys/kernel/mm/ should contain any and all VM
+		related information in /sys/kernel/.

linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-hugepages

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
new file mode 100644
index 0000000..e21c005
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -0,0 +1,15 @@
+What:		/sys/kernel/mm/hugepages/
+Date:		June 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
+Description:
+		/sys/kernel/mm/hugepages/ contains a number of subdirectories
+		of the form hugepages-<size>kB, where <size> is the page size
+		of the hugepages supported by the kernel/CPU combination.
+
+		Under these directories are a number of files:
+			nr_hugepages
+			nr_overcommit_hugepages
+			free_hugepages
+			surplus_hugepages
+			resv_hugepages
+		See Documentation/vm/hugetlbpage.txt for details.

linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-ksm

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-ksm
new file mode 100644
index 0000000..73e653e
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-mm-ksm
@@ -0,0 +1,52 @@
+What:		/sys/kernel/mm/ksm
+Date:		September 2009
+KernelVersion:	2.6.32
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Interface for Kernel Samepage Merging (KSM)
+
+What:		/sys/kernel/mm/ksm/full_scans
+What:		/sys/kernel/mm/ksm/pages_shared
+What:		/sys/kernel/mm/ksm/pages_sharing
+What:		/sys/kernel/mm/ksm/pages_to_scan
+What:		/sys/kernel/mm/ksm/pages_unshared
+What:		/sys/kernel/mm/ksm/pages_volatile
+What:		/sys/kernel/mm/ksm/run
+What:		/sys/kernel/mm/ksm/sleep_millisecs
+Date:		September 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Kernel Samepage Merging daemon sysfs interface
+
+		full_scans: how many times all mergeable areas have been
+		scanned.
+
+		pages_shared: how many shared pages are being used.
+
+		pages_sharing: how many more sites are sharing them i.e. how
+		much saved.
+
+		pages_to_scan: how many present pages to scan before ksmd goes
+		to sleep.
+
+		pages_unshared: how many pages unique but repeatedly checked
+		for merging.
+
+		pages_volatile: how many pages changing too fast to be placed
+		in a tree.
+
+		run: write 0 to disable ksm, read 0 while ksm is disabled.
+			write 1 to run ksm, read 1 while ksm is running.
+			write 2 to disable ksm and unmerge all its pages.
+
+		sleep_millisecs: how many milliseconds ksm should sleep between
+		scans.
+
+		See Documentation/vm/ksm.txt for more information.
+
+What:		/sys/kernel/mm/ksm/merge_across_nodes
+Date:		January 2013
+KernelVersion:	3.9
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Control merging pages across different NUMA nodes.
+
+		When it is set to 0 only pages from the same node are merged,
+		otherwise pages from all nodes can be merged together (default).

linux-imx/Documentation/ABI/testing/sysfs-kernel-slab

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-slab b/linux-imx/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644
index 0000000..91bd6ca
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-slab
@@ -0,0 +1,490 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file shows how many objects have been
+		allocated using the fast path.  It can be written to clear the
+		current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file shows how many times a cpu slab has
+		been full and it has been refilled by using a slab from the list
+		of partially used slabs.  It can be written to clear the current
+		count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file shows how many times the per-cpu freelist
+		was empty but there were objects available as the result of
+		remote cpu frees.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is shows how many times a new slab had to
+		be allocated from the page allocator.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file shows how many objects have been
+		allocated using the slow path because of a refill or
+		allocation from a partial or new slab.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush shows how many times a cache's cpu slabs
+		have been flushed as the result of destroying or shrinking a
+		cache, a cpu going offline, or as the result of forcing an
+		allocation from a certain node.  It can be written to clear the
+		current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_empty file shows how many times an empty cpu slab
+		was deactivated.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_full file shows how many times a full cpu slab
+		was deactivated.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_remote_frees file shows how many times a cpu slab
+		has been deactivated and contained free objects that were freed
+		remotely.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_to_head file shows how many times a partial cpu
+		slab was deactivated and added to the head of its node's partial
+		list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The deactivate_to_tail file shows how many times a partial cpu
+		slab was deactivated and added to the tail of its node's partial
+		list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_add_partial file shows how many times an object has
+		been freed in a full slab so that it had to added to its node's
+		partial list.  It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file shows how many objects have been freed
+		using the fast path because it was an object from the cpu slab.
+		It can be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file shows how many objects have been freed to
+		a frozen slab (i.e. a remote cpu slab).  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_remove_partial file shows how many times an object has
+		been freed to a now-empty slab so that it had to be removed from
+		its node's partial list.  It can be written to clear the current
+		count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file shows how many times an empty slab has been
+		freed back to the page allocator.  It can be written to clear
+		the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file shows how many objects have been freed
+		using the slow path (i.e. to a full or partial slab).  It can
+		be written to clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+		When debug_guardpage_minorder=N (N > 0) parameter is specified
+		(see Documentation/kernel-parameters.txt), the minimum possible
+		order is used and this sysfs entry can not be used to change
+		the order at run time.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order_fallback file shows how many times an allocation of a
+		new slab has not been possible at the cache's order and instead
+		fallen back to its minimum possible order.  It can be written to
+		clear the current count.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.

linux-imx/Documentation/ABI/testing/sysfs-kernel-uids

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-kernel-uids b/linux-imx/Documentation/ABI/testing/sysfs-kernel-uids
new file mode 100644
index 0000000..28f1469
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-kernel-uids
@@ -0,0 +1,14 @@
+What:		/sys/kernel/uids/<uid>/cpu_shares
+Date:		December 2007
+Contact:	Dhaval Giani <dhaval@linux.vnet.ibm.com>
+		Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
+Description:
+		The /sys/kernel/uids/<uid>/cpu_shares tunable is used
+		to set the cpu bandwidth a user is allowed. This is a
+		propotional value. What that means is that if there
+		are two users logged in, each with an equal number of
+		shares, then they will get equal CPU bandwidth. Another
+		example would be, if User A has shares = 1024 and user
+		B has shares = 2048, User B will get twice the CPU
+		bandwidth user A will. For more details refer
+		Documentation/scheduler/sched-design-CFS.txt

linux-imx/Documentation/ABI/testing/sysfs-memory-page-offline

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-memory-page-offline b/linux-imx/Documentation/ABI/testing/sysfs-memory-page-offline
new file mode 100644
index 0000000..e14703f
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-memory-page-offline
@@ -0,0 +1,44 @@
+What:		/sys/devices/system/memory/soft_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Soft-offline the memory page containing the physical address
+		written into this file. Input is a hex number specifying the
+		physical address of the page. The kernel will then attempt
+		to soft-offline it, by moving the contents elsewhere or
+		dropping it if possible. The kernel will then be placed
+		on the bad page list and never be reused.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		The page must be still accessible, not poisoned. The
+		kernel will never kill anything for this, but rather
+		fail the offline.  Return value is the size of the
+		number, or a error when the offlining failed.  Reading
+		the file is not allowed.
+
+What:		/sys/devices/system/memory/hard_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Hard-offline the memory page containing the physical
+		address written into this file. Input is a hex number
+		specifying the physical address of the page. The
+		kernel will then attempt to hard-offline the page, by
+		trying to drop the page or killing any owner or
+		triggering IO errors if needed.  Note this may kill
+		any processes owning the page. The kernel will avoid
+		to access this page assuming it's poisoned by the
+		hardware.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		Return value is the size of the number, or a error when
+		the offlining failed.
+		Reading the file is not allowed.

linux-imx/Documentation/ABI/testing/sysfs-module

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-module b/linux-imx/Documentation/ABI/testing/sysfs-module
new file mode 100644
index 0000000..47064c2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-module
@@ -0,0 +1,51 @@
+What:		/sys/module/pch_phub/drivers/.../pch_mac
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read GbE MAC address.
+
+What:		/sys/module/pch_phub/drivers/.../pch_firmware
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read Option ROM data.
+
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together. ]
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.
+
+What:		/sys/module/*/{coresize,initsize}
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module size in bytes.
+
+What:		/sys/module/*/taint
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module taint flags:
+			P - proprietary module
+			O - out-of-tree module
+			F - force-loaded module
+			C - staging driver module

linux-imx/Documentation/ABI/testing/sysfs-ocfs2

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-ocfs2 b/linux-imx/Documentation/ABI/testing/sysfs-ocfs2
new file mode 100644
index 0000000..b7cc516
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-ocfs2
@@ -0,0 +1,89 @@
+What:		/sys/fs/ocfs2/
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2 directory contains knobs used by the
+		ocfs2-tools to interact with the filesystem.
+
+What:		/sys/fs/ocfs2/max_locking_protocol
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/max_locking_protocol file displays version
+		of ocfs2 locking supported by the filesystem.  This version
+		covers how ocfs2 uses distributed locking between cluster
+		nodes.
+
+		The protocol version has a major and minor number.  Two
+		cluster nodes can interoperate if they have an identical
+		major number and an overlapping minor number - thus,
+		a node with version 1.10 can interoperate with a node
+		sporting version 1.8, as long as both use the 1.8 protocol.
+
+		Reading from this file returns a single line, the major
+		number and minor number joined by a period, eg "1.10".
+
+		This file is read-only.  The value is compiled into the
+		driver.
+
+What:		/sys/fs/ocfs2/loaded_cluster_plugins
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/loaded_cluster_plugins file describes
+		the available plugins to support ocfs2 cluster operation.
+		A cluster plugin is required to use ocfs2 in a cluster.
+		There are currently two available plugins:
+
+		* 'o2cb' - The classic o2cb cluster stack that ocfs2 has
+			used since its inception.
+		* 'user' - A plugin supporting userspace cluster software
+			in conjunction with fs/dlm.
+
+		Reading from this file returns the names of all loaded
+		plugins, one per line.
+
+		This file is read-only.  Its contents may change as
+		plugins are loaded or removed.
+
+What:		/sys/fs/ocfs2/active_cluster_plugin
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/active_cluster_plugin displays which
+		cluster plugin is currently in use by the filesystem.
+		The active plugin will appear in the loaded_cluster_plugins
+		file as well.  Only one plugin can be used at a time.
+
+		Reading from this file returns the name of the active plugin
+		on a single line.
+
+		This file is read-only.  Which plugin is active depends on
+		the cluster stack in use.  The contents may change
+		when all filesystems are unmounted and the cluster stack
+		is changed.
+
+What:		/sys/fs/ocfs2/cluster_stack
+Date:		April 2008
+Contact:	ocfs2-devel@oss.oracle.com
+Description:
+		The /sys/fs/ocfs2/cluster_stack file contains the name
+		of current ocfs2 cluster stack.  This value is set by
+		userspace tools when bringing the cluster stack online.
+
+		Cluster stack names are 4 characters in length.
+
+		When the 'o2cb' cluster stack is used, the 'o2cb' cluster
+		plugin is active.  All other cluster stacks use the 'user'
+		cluster plugin.
+
+		Reading from this file returns the name of the current
+		cluster stack on a single line.
+
+		Writing a new stack name to this file changes the current
+		cluster stack unless there are mounted ocfs2 filesystems.
+		If there are mounted filesystems, attempts to change the
+		stack return an error.
+
+Users:
+	ocfs2-tools <ocfs2-tools-devel@oss.oracle.com>

linux-imx/Documentation/ABI/testing/sysfs-platform-asus-laptop

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-laptop b/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-laptop
new file mode 100644
index 0000000..cd9d667
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -0,0 +1,66 @@
+What:		/sys/devices/platform/asus_laptop/display
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching. The value
+		is composed by 4 bits and defined as follow:
+		4321
+		|||`- LCD
+		||`-- CRT
+		|`--- TV
+		`---- DVI
+		Ex: - 0 (0000b) means no display
+		    - 3 (0011b) CRT+LCD.
+
+What:		/sys/devices/platform/asus_laptop/gps
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the gps device. 1 means on, 0 means off.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/ledd
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Some models like the W1N have a LED display that can be
+		used to display several items of information.
+		To control the LED display, use the following :
+		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
+		where T control the 3 letters display, and DDD the 3 digits display.
+		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+
+What:		/sys/devices/platform/asus_laptop/bluetooth
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wlan
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wlan device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wimax
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wimax device. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/asus_laptop/wwan
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wwan (3G) device. 1 means on, 0 means off.

linux-imx/Documentation/ABI/testing/sysfs-platform-asus-wmi

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-wmi b/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-wmi
new file mode 100644
index 0000000..019e1e2
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -0,0 +1,38 @@
+What:		/sys/devices/platform/<platform>/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+
+What:		/sys/devices/platform/<platform>/camera
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/cardr
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/touchpad
+Date:		Jan 2010
+KernelVersion:	2.6.39
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card touchpad. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/<platform>/lid_resume
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	"AceLan Kao" <acelan.kao@canonical.com>
+Description:
+		Resume on lid open. 1 means on, 0 means off.

linux-imx/Documentation/ABI/testing/sysfs-platform-at91

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-at91 b/linux-imx/Documentation/ABI/testing/sysfs-platform-at91
new file mode 100644
index 0000000..4cc6a86
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-at91
@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+		Value representing the can_id of mailbox 0.
+
+		Default: 0x7ff (standard frame)
+
+		Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+		"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+		contents of mailbox 0 may be send under certain
+		conditions (even if disabled or in rx mode).
+
+		The workaround in the errata suggests not to use the
+		mailbox and load it with an unused identifier.
+
+		In order to use an extended can_id add the
+		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+		- standard id 0x7ff:
+		echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff:
+		echo 0x9fffffff > /sys/class/net/can0/mb0_id

linux-imx/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg b/linux-imx/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
new file mode 100644
index 0000000..151c595
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
@@ -0,0 +1,56 @@
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read.
+		Set a_bus_req(A-device bus request) input to be 1 if
+		the application running on the A-device wants to use the bus,
+		and to be 0 when the application no longer wants to use
+		the bus(or wants to work as peripheral). a_bus_req can also
+		be set to 1 by kernel in response to remote wakeup signaling
+		from the B-device, the A-device should decide to resume the bus.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the application running on the A-device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read
+		The a_bus_drop(A-device bus drop) input is 1 when the
+		application running on the A-device wants to power down
+		the bus, and is 0 otherwise, When a_bus_drop is 1, then
+		the a_bus_req shall be 0.
+
+		Valid values are "1" and "0".
+
+		Reading: returns 1 if the bus is off(vbus is turned off) by
+			 A-device, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Can be set and read.
+		The b_bus_req(B-device bus request) input is 1 during the time
+		that the application running on the B-device wants to use the
+		bus as host, and is 0 when the application no longer wants to
+		work as host and decides to switch back to be peripheral.
+
+		Valid values are "1" and "0".
+
+		Reading: returns if the application running on the B device
+		is using the bus as host role, otherwise 0.
+
+What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
+Date:		Feb 2014
+Contact:	Li Jun <b47624@freescale.com>
+Description:
+		Only can be set.
+		The a_clr_err(A-device Vbus error clear) input is used to clear
+		vbus error, then A-device will power down the bus.
+
+		Valid value is "1"

linux-imx/Documentation/ABI/testing/sysfs-platform-eeepc-laptop

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/linux-imx/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
new file mode 100644
index 0000000..5b026c6
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
@@ -0,0 +1,50 @@
+What:		/sys/devices/platform/eeepc/disp
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		This file allows display switching.
+		- 1 = LCD
+		- 2 = CRT
+		- 3 = LCD+CRT
+		If you run X11, you should use xrandr instead.
+
+What:		/sys/devices/platform/eeepc/camera
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc/cardr
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc/cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration.
+		On the Eee PC 1000H there are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+		On Eee PC 701 there is only 2 available clock configurations.
+		Available configuration are listed in available_cpufv file.
+		Reading this file will show the raw hexadecimal value which
+		is defined as follow:
+		| 8 bit | 8 bit |
+		    |       `---- Current mode
+		    `------------ Availables modes
+		For example, 0x301 means: mode 1 selected, 3 available modes.
+
+What:		/sys/devices/platform/eeepc/available_cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		List available cpufv modes.

linux-imx/Documentation/ABI/testing/sysfs-platform-ideapad-laptop

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/linux-imx/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
new file mode 100644
index 0000000..b31e782
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
@@ -0,0 +1,19 @@
+What:		/sys/devices/platform/ideapad/camera_power
+Date:		Dec 2010
+KernelVersion:	2.6.37
+Contact:	"Ike Panhc <ike.pan@canonical.com>"
+Description:
+		Control the power of camera module. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/ideapad/fan_mode
+Date:		June 2012
+KernelVersion:	3.6
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Change fan mode
+		There are four available modes:
+			* 0 -> Super Silent Mode
+			* 1 -> Standard Mode
+			* 2 -> Dust Cleaning
+			* 4 -> Efficient Thermal Dissipation Mode
+

linux-imx/Documentation/ABI/testing/sysfs-platform-kim

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-kim b/linux-imx/Documentation/ABI/testing/sysfs-platform-kim
new file mode 100644
index 0000000..c165327
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-kim
@@ -0,0 +1,48 @@
+What:		/sys/devices/platform/kim/dev_name
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		Name of the UART device at which the WL128x chip
+		is connected. example: "/dev/ttyS0".
+		The device name flows down to architecture specific board
+		initialization file from the SFI/ATAGS bootloader
+		firmware. The name exposed is read from the user-space
+		dameon and opens the device when install is requested.
+
+What:		/sys/devices/platform/kim/baud_rate
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The maximum reliable baud-rate the host can support.
+		Different platforms tend to have different high-speed
+		UART configurations, so the baud-rate needs to be set
+		locally and also sent across to the WL128x via a HCI-VS
+		command. The entry is read and made use by the user-space
+		daemon when the ldisc install is requested.
+
+What:		/sys/devices/platform/kim/flow_cntrl
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		The WL128x makes use of flow control mechanism, and this
+		entry most often should be 1, the host's UART is required
+		to have the capability of flow-control, or else this
+		entry can be made use of for exceptions.
+
+What:		/sys/devices/platform/kim/install
+Date:		January 2010
+KernelVersion:	2.6.38
+Contact:	"Pavan Savoy" <pavan_savoy@ti.com>
+Description:
+		When one of the protocols Bluetooth, FM or GPS wants to make
+		use of the shared UART transport, it registers to the shared
+		transport driver, which will signal the user-space for opening,
+		configuring baud and install line discipline via this sysfs
+		entry. This entry would be polled upon by the user-space
+		daemon managing the UART, and is notified about the change
+		by the sysfs_notify. The value would be '1' when UART needs
+		to be opened/ldisc installed, and would be '0' when UART
+		is no more required and needs to be closed.

linux-imx/Documentation/ABI/testing/sysfs-platform-msi-laptop

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-msi-laptop b/linux-imx/Documentation/ABI/testing/sysfs-platform-msi-laptop
new file mode 100644
index 0000000..307a247
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-msi-laptop
@@ -0,0 +1,83 @@
+What:		/sys/devices/platform/msi-laptop-pf/lcd_level
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Screen brightness: contains a single integer in the range 0..8.
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_brightness
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Enable automatic brightness control: contains either 0 or 1. If
+		set to 1 the hardware adjusts the screen brightness
+		automatically when the power cord is plugged/unplugged.
+
+What:		/sys/devices/platform/msi-laptop-pf/wlan
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		WLAN subsystem enabled: contains either 0 or 1.
+
+What:		/sys/devices/platform/msi-laptop-pf/bluetooth
+Date:		Oct 2006
+KernelVersion:	2.6.19
+Contact:	"Lennart Poettering <mzxreary@0pointer.de>"
+Description:
+		Bluetooth subsystem enabled: contains either 0 or 1. Please
+		note that this file is constantly 0 if no Bluetooth hardware is
+		available.
+
+What:		/sys/devices/platform/msi-laptop-pf/touchpad
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if touchpad is turned on.
+		Touchpad state can only be toggled by pressing Fn+F3.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if turbo mode is turned
+		on. In turbo mode power LED is orange and processor is
+		overclocked. Turbo mode is available only if charging. It is
+		only possible to toggle turbo mode state by pressing Fn+F10,
+		and there is a few seconds cooldown between subsequent toggles.
+		If user presses Fn+F10 too frequent, turbo mode state is not
+		changed.
+
+What:		/sys/devices/platform/msi-laptop-pf/eco_mode
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if ECO mode is turned on.
+		In ECO mode power LED is green and userspace should do some
+		powersaving actions. ECO mode is available only on battery
+		power. ECO mode can only be toggled by pressing Fn+F10.
+
+What:		/sys/devices/platform/msi-laptop-pf/turbo_cooldown
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains value in range 0..3:
+			* 0 -> Turbo mode is off
+			* 1 -> Turbo mode is on, cannot be turned off yet
+			* 2 -> Turbo mode is off, cannot be turned on yet
+			* 3 -> Turbo mode is on
+
+What:		/sys/devices/platform/msi-laptop-pf/auto_fan
+Date:		Nov 2012
+KernelVersion:	3.8
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Contains either 0 or 1 and indicates if fan speed is controlled
+		automatically (1) or fan runs at maximal speed (0). Can be
+		toggled in software.
+

linux-imx/Documentation/ABI/testing/sysfs-platform-ts5500

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-platform-ts5500 b/linux-imx/Documentation/ABI/testing/sysfs-platform-ts5500
new file mode 100644
index 0000000..c88375a
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-platform-ts5500
@@ -0,0 +1,47 @@
+What:		/sys/devices/platform/ts5500/adc
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an A/D Converter. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/ereset
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of an external reset. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/id
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Product ID of the TS board. TS-5500 ID is 0x60.
+
+What:		/sys/devices/platform/ts5500/jumpers
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Bitfield showing the jumpers' state. If a jumper is present,
+		the corresponding bit is set. For instance, 0x0e means jumpers
+		2, 3 and 4 are set.
+
+What:		/sys/devices/platform/ts5500/rs485
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the RS485 option. If it is present,
+		it will display "1", otherwise "0".
+
+What:		/sys/devices/platform/ts5500/sram
+Date:		January 2013
+KernelVersion:	3.7
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Indicates the presence of the SRAM option. If it is present,
+		it will display "1", otherwise "0".

linux-imx/Documentation/ABI/testing/sysfs-power

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-power b/linux-imx/Documentation/ABI/testing/sysfs-power
new file mode 100644
index 0000000..2177726
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-power
@@ -0,0 +1,246 @@
+What:		/sys/power/
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power directory will contain files that will
+		provide a unified interface to the power management
+		subsystem.
+
+What:		/sys/power/state
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/state file controls the system power state.
+		Reading from this file returns what states are supported,
+		which is hard-coded to 'standby' (Power-On Suspend), 'mem'
+		(Suspend-to-RAM), and 'disk' (Suspend-to-Disk).
+
+		Writing to this file one of these strings causes the system to
+		transition into that state. Please see the file
+		Documentation/power/states.txt for a description of each of
+		these states.
+
+What:		/sys/power/disk
+Date:		September 2006
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/disk file controls the operating mode of the
+		suspend-to-disk mechanism.  Reading from this file returns
+		the name of the method by which the system will be put to
+		sleep on the next suspend.  There are four methods supported:
+		'firmware' - means that the memory image will be saved to disk
+		by some firmware, in which case we also assume that the
+		firmware will handle the system suspend.
+		'platform' - the memory image will be saved by the kernel and
+		the system will be put to sleep by the platform driver (e.g.
+		ACPI or other PM registers).
+		'shutdown' - the memory image will be saved by the kernel and
+		the system will be powered off.
+		'reboot' - the memory image will be saved by the kernel and
+		the system will be rebooted.
+
+		Additionally, /sys/power/disk can be used to turn on one of the
+		two testing modes of the suspend-to-disk mechanism: 'testproc'
+		or 'test'.  If the suspend-to-disk mechanism is in the
+		'testproc' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, wait for 5
+		seconds, unfreeze tasks and enable nonboot CPUs.  If it is in
+		the 'test' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, shrink
+		memory, suspend devices, wait for 5 seconds, resume devices,
+		unfreeze tasks and enable nonboot CPUs.  Then, we are able to
+		look in the log messages and work out, for example, which code
+		is being slow and which device drivers are misbehaving.
+
+		The suspend-to-disk method may be chosen by writing to this
+		file one of the accepted strings:
+
+		'firmware'
+		'platform'
+		'shutdown'
+		'reboot'
+		'testproc'
+		'test'
+
+		It will only change to 'firmware' or 'platform' if the system
+		supports that.
+
+What:		/sys/power/image_size
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/image_size file controls the size of the image
+		created by the suspend-to-disk mechanism.  It can be written a
+		string representing a non-negative integer that will be used
+		as an upper limit of the image size, in bytes.  The kernel's
+		suspend-to-disk code will do its best to ensure the image size
+		will not exceed this number.  However, if it turns out to be
+		impossible, the kernel will try to suspend anyway using the
+		smallest image possible.  In particular, if "0" is written to
+		this file, the suspend image will be as small as possible.
+
+		Reading from this file will display the current image size
+		limit, which is set to 500 MB by default.
+
+What:		/sys/power/pm_trace
+Date:		August 2006
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/pm_trace file controls the code which saves the
+		last PM event point in the RTC across reboots, so that you can
+		debug a machine that just hangs during suspend (or more
+		commonly, during resume).  Namely, the RTC is only used to save
+		the last PM event point if this file contains '1'.  Initially
+		it contains '0' which may be changed to '1' by writing a
+		string representing a nonzero integer into it.
+
+		To use this debugging feature you should attempt to suspend
+		the machine, then reboot it and run
+
+		dmesg -s 1000000 | grep 'hash matches'
+
+		If you do not get any matches (or they appear to be false
+		positives), it is possible that the last PM event point
+		referred to a device created by a loadable kernel module.  In
+		this case cat /sys/power/pm_trace_dev_match (see below) after
+		your system is started up and the kernel modules are loaded.
+
+		CAUTION: Using it will cause your machine's real-time (CMOS)
+		clock to be set to a random invalid time after a resume.
+
+What;		/sys/power/pm_trace_dev_match
+Date:		October 2010
+Contact:	James Hogan <james@albanarts.com>
+Description:
+		The /sys/power/pm_trace_dev_match file contains the name of the
+		device associated with the last PM event point saved in the RTC
+		across reboots when pm_trace has been used.  More precisely it
+		contains the list of current devices (including those
+		registered by loadable kernel modules since boot) which match
+		the device hash in the RTC at boot, with a newline after each
+		one.
+
+		The advantage of this file over the hash matches printed to the
+		kernel log (see /sys/power/pm_trace), is that it includes
+		devices created after boot by loadable kernel modules.
+
+		Due to the small hash size necessary to fit in the RTC, it is
+		possible that more than one device matches the hash, in which
+		case further investigation is required to determine which
+		device is causing the problem.  Note that genuine RTC clock
+		values (such as when pm_trace has not been used), can still
+		match a device and output it's name here.
+
+What:		/sys/power/pm_async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/pm_async file controls the switch allowing the
+		user space to enable or disable asynchronous suspend and resume
+		of devices.  If enabled, this feature will cause some device
+		drivers' suspend and resume callbacks to be executed in parallel
+		with each other and with the main suspend thread.  It is enabled
+		if this file contains "1", which is the default.  It may be
+		disabled by writing "0" to this file, in which case all devices
+		will be suspended and resumed synchronously.
+
+What:		/sys/power/wakeup_count
+Date:		July 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wakeup_count file allows user space to put the
+		system into a sleep state while taking into account the
+		concurrent arrival of wakeup events.  Reading from it returns
+		the current number of registered wakeup events and it blocks if
+		some wakeup events are being processed at the time the file is
+		read from.  Writing to it will only succeed if the current
+		number of wakeup events is equal to the written value and, if
+		successful, will make the kernel abort a subsequent transition
+		to a sleep state if any wakeup events are reported after the
+		write has returned.
+
+What:		/sys/power/reserved_size
+Date:		May 2011
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/reserved_size file allows user space to control
+		the amount of memory reserved for allocations made by device
+		drivers during the "device freeze" stage of hibernation.  It can
+		be written a string representing a non-negative integer that
+		will be used as the amount of memory to reserve for allocations
+		made by device drivers' "freeze" callbacks, in bytes.
+
+		Reading from this file will display the current value, which is
+		set to 1 MB by default.
+
+What:		/sys/power/autosleep
+Date:		April 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/autosleep file can be written one of the strings
+		returned by reads from /sys/power/state.  If that happens, a
+		work item attempting to trigger a transition of the system to
+		the sleep state represented by that string is queued up.  This
+		attempt will only succeed if there are no active wakeup sources
+		in the system at that time.  After every execution, regardless
+		of whether or not the attempt to put the system to sleep has
+		succeeded, the work item requeues itself until user space
+		writes "off" to /sys/power/autosleep.
+
+		Reading from this file causes the last string successfully
+		written to it to be returned.
+
+What:		/sys/power/wake_lock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_lock file allows user space to create
+		wakeup source objects and activate them on demand (if one of
+		those wakeup sources is active, reads from the
+		/sys/power/wakeup_count file block or return false).  When a
+		string without white space is written to /sys/power/wake_lock,
+		it will be assumed to represent a wakeup source name.  If there
+		is a wakeup source object with that name, it will be activated
+		(unless active already).  Otherwise, a new wakeup source object
+		will be registered, assigned the given name and activated.
+		If a string written to /sys/power/wake_lock contains white
+		space, the part of the string preceding the white space will be
+		regarded as a wakeup source name and handled as descrived above.
+		The other part of the string will be regarded as a timeout (in
+		nanoseconds) such that the wakeup source will be automatically
+		deactivated after it has expired.  The timeout, if present, is
+		set regardless of the current state of the wakeup source object
+		in question.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of it that are active at
+		the moment, separated with spaces.
+
+
+What:		/sys/power/wake_unlock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_unlock file allows user space to deactivate
+		wakeup sources created with the help of /sys/power/wake_lock.
+		When a string is written to /sys/power/wake_unlock, it will be
+		assumed to represent the name of a wakeup source to deactivate.
+		If a wakeup source object of that name exists and is active at
+		the moment, it will be deactivated.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of /sys/power/wake_lock
+		that are inactive at the moment, separated with spaces.
+
+What:		/sys/power/pm_print_times
+Date:		May 2012
+Contact:	Sameer Nanda <snanda@chromium.org>
+Description:
+		The /sys/power/pm_print_times file allows user space to
+		control whether the time taken by devices to suspend and
+		resume is printed.  These prints are useful for hunting down
+		devices that take too long to suspend or resume.
+
+		Writing a "1" enables this printing while writing a "0"
+		disables it.  The default value is "0".  Reading from this file
+		will display the current value.

linux-imx/Documentation/ABI/testing/sysfs-pps

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-pps b/linux-imx/Documentation/ABI/testing/sysfs-pps
new file mode 100644
index 0000000..25028c7
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-pps
@@ -0,0 +1,73 @@
+What:		/sys/class/pps/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ directory will contain files and
+		directories that will provide a unified interface to
+		the PPS sources.
+
+What:		/sys/class/pps/ppsX/
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/ directory is related to X-th
+		PPS source into the system. Each directory will
+		contain files to manage and control its PPS source.
+
+What:		/sys/class/pps/ppsX/assert
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/assert file reports the assert events
+		and the assert sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no assert events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/clear
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/clear file reports the clear events
+		and the clear sequence number of the X-th source in the form:
+
+			<secs>.<nsec>#<sequence>
+
+		If the source has no clear events the content of this file
+		is empty.
+
+What:		/sys/class/pps/ppsX/mode
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/mode file reports the functioning
+		mode of the X-th source in hexadecimal encoding.
+
+		Please, refer to linux/include/linux/pps.h for further
+		info.
+
+What:		/sys/class/pps/ppsX/echo
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/echo file reports if the X-th does
+		or does not support an "echo" function.
+
+What:		/sys/class/pps/ppsX/name
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/name file reports the name of the
+		X-th source.
+
+What:		/sys/class/pps/ppsX/path
+Date:		February 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/pps/ppsX/path file reports the path name of
+		the device connected with the X-th source.
+
+		If the source is not connected with any device the content
+		of this file is empty.

linux-imx/Documentation/ABI/testing/sysfs-profiling

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-profiling b/linux-imx/Documentation/ABI/testing/sysfs-profiling
new file mode 100644
index 0000000..8a8e466
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-profiling
@@ -0,0 +1,13 @@
+What:		/sys/kernel/profiling
+Date:		September 2008
+Contact:	Dave Hansen <dave@linux.vnet.ibm.com>
+Description:
+		/sys/kernel/profiling is the runtime equivalent
+		of the boot-time profile= option.
+
+		You can get the same effect running:
+
+			echo 2 > /sys/kernel/profiling
+
+		as you would by issuing profile=2 on the boot
+		command line.

linux-imx/Documentation/ABI/testing/sysfs-ptp

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-ptp b/linux-imx/Documentation/ABI/testing/sysfs-ptp
new file mode 100644
index 0000000..05aeedf
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-ptp
@@ -0,0 +1,102 @@
+What:		/sys/class/ptp/
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This directory contains files and directories
+		providing a standardized interface to the ancillary
+		features of PTP hardware clocks.
+
+What:		/sys/class/ptp/ptpN/
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This directory contains the attributes of the Nth PTP
+		hardware clock registered into the PTP class driver
+		subsystem.
+
+What:		/sys/class/ptp/ptpN/clock_name
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the name of the PTP hardware clock
+		as a human readable string. The purpose of this
+		attribute is to provide the user with a "friendly
+		name" and to help distinguish PHY based devices from
+		MAC based ones. The string does not necessarily have
+		to be any kind of unique id.
+
+What:		/sys/class/ptp/ptpN/max_adjustment
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the PTP hardware clock's maximum
+		frequency adjustment value (a positive integer) in
+		parts per billion.
+
+What:		/sys/class/ptp/ptpN/n_alarms
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of periodic or one shot
+		alarms offer by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/n_external_timestamps
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of external timestamp
+		channels offered by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/n_periodic_outputs
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file contains the number of programmable periodic
+		output channels offered by the PTP hardware clock.
+
+What:		/sys/class/ptp/ptpN/pps_avaiable
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file indicates whether the PTP hardware clock
+		supports a Pulse Per Second to the host CPU. Reading
+		"1" means that the PPS is supported, while "0" means
+		not supported.
+
+What:		/sys/class/ptp/ptpN/extts_enable
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables external
+		timestamps. To enable external timestamps, write the
+		channel index followed by a "1" into the file.
+		To disable external timestamps, write the channel
+		index followed by a "0" into the file.
+
+What:		/sys/class/ptp/ptpN/fifo
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This file provides timestamps on external events, in
+		the form of three integers: channel index, seconds,
+		and nanoseconds.
+
+What:		/sys/class/ptp/ptpN/period
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables periodic
+		outputs. To enable a periodic output, write five
+		integers into the file: channel index, start time
+		seconds, start time nanoseconds, period seconds, and
+		period nanoseconds. To disable a periodic output, set
+		all the seconds and nanoseconds values to zero.
+
+What:		/sys/class/ptp/ptpN/pps_enable
+Date:		September 2010
+Contact:	Richard Cochran <richardcochran@gmail.com>
+Description:
+		This write-only file enables or disables delivery of
+		PPS events to the Linux PPS subsystem. To enable PPS
+		events, write a "1" into the file. To disable events,
+		write a "0" into the file.

linux-imx/Documentation/ABI/testing/sysfs-tty

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-tty b/linux-imx/Documentation/ABI/testing/sysfs-tty
new file mode 100644
index 0000000..ad22fb0
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-tty
@@ -0,0 +1,140 @@
+What:		/sys/class/tty/console/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the list of currently configured
+		 console devices, like 'tty1 ttyS0'.
+		 The last entry in the file is the active
+		 device connected to /dev/console.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/tty0/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the currently active virtual console
+		 device, like 'tty1'.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty type for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/line
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty line number for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/port
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current tty port I/O address for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/irq
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Shows the current primary interrupt for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/flags
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the tty port status flags for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/xmit_fifo_size
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the transmit FIFO size for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/close_delay
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the closing delay time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/closing_wait
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the close wait time for this port in ms.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/custom_divisor
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the custom divisor if any that is set on this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/io_type
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the I/O type that is to be used with the iomem base
+		 address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_base
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 The I/O memory base for this port.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/iomem_reg_shift
+Date:		October 2012
+Contact:	Alan Cox <alan@linux.intel.com>
+Description:
+		 Show the register shift indicating the spacing to be used
+		 for accesses on this iomem address.
+
+		 These sysfs values expose the TIOCGSERIAL interface via
+		 sysfs rather than via ioctls.

linux-imx/Documentation/ABI/testing/sysfs-wusb_cbaf

diff --git a/linux-imx/Documentation/ABI/testing/sysfs-wusb_cbaf b/linux-imx/Documentation/ABI/testing/sysfs-wusb_cbaf
new file mode 100644
index 0000000..a99c5f8
--- /dev/null
+++ b/linux-imx/Documentation/ABI/testing/sysfs-wusb_cbaf
@@ -0,0 +1,100 @@
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_*
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Various files for managing Cable Based Association of
+                (wireless) USB devices.
+
+                The sequence of operations should be:
+
+                1. Device is plugged in.
+
+                2. The connection manager (CM) sees a device with CBA capability.
+                   (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
+
+                3. The CM writes the host name, supported band groups,
+                   and the CHID (host ID) into the wusb_host_name,
+                   wusb_host_band_groups and wusb_chid files. These
+                   get sent to the device and the CDID (if any) for
+                   this host is requested.
+
+                4. The CM can verify that the device's supported band
+                   groups (wusb_device_band_groups) are compatible
+                   with the host.
+
+                5. The CM reads the wusb_cdid file.
+
+                6. The CM looks it up its database.
+
+                   - If it has a matching CHID,CDID entry, the device
+                     has been authorized before and nothing further
+                     needs to be done.
+
+                   - If the CDID is zero (or the CM doesn't find a
+                     matching CDID in its database), the device is
+                     assumed to be not known.  The CM may associate
+                     the host with device by: writing a randomly
+                     generated CDID to wusb_cdid and then a random CK
+                     to wusb_ck (this uploads the new CC to the
+                     device).
+
+                     CMD may choose to prompt the user before
+                     associating with a new device.
+
+                7. Device is unplugged.
+
+                References:
+                  [WUSB-AM] Association Models Supplement to the
+                            Certified Wireless Universal Serial Bus
+                            Specification, version 1.0.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The CHID of the host formatted as 16 space-separated
+                hex octets.
+
+                Writes fetches device's supported band groups and the
+                the CDID for any existing association with this host.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                A friendly name for the host as a UTF-8 encoded string.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the host, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the device, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The device's CDID formatted as 16 space-separated hex
+                octets.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write 16 space-separated random, hex octets to
+                associate with the device.

linux-imx/Documentation/BUG-HUNTING

diff --git a/linux-imx/Documentation/BUG-HUNTING b/linux-imx/Documentation/BUG-HUNTING
new file mode 100644
index 0000000..65022a8
--- /dev/null
+++ b/linux-imx/Documentation/BUG-HUNTING
@@ -0,0 +1,246 @@
+Table of contents
+=================
+
+Last updated: 20 December 2005
+
+Contents
+========
+
+- Introduction
+- Devices not appearing
+- Finding patch that caused a bug
+-- Finding using git-bisect
+-- Finding it the old way
+- Fixing the bug
+
+Introduction
+============
+
+Always try the latest kernel from kernel.org and build from source. If you are
+not confident in doing that please report the bug to your distribution vendor
+instead of to a kernel developer.
+
+Finding bugs is not always easy. Have a go though. If you can't find it don't
+give up. Report as much as you have found to the relevant maintainer. See
+MAINTAINERS for who that is for the subsystem you have worked on.
+
+Before you submit a bug report read REPORTING-BUGS.
+
+Devices not appearing
+=====================
+
+Often this is caused by udev. Check that first before blaming it on the
+kernel.
+
+Finding patch that caused a bug
+===============================
+
+
+
+Finding using git-bisect
+------------------------
+
+Using the provided tools with git makes finding bugs easy provided the bug is
+reproducible.
+
+Steps to do it:
+- start using git for the kernel source
+- read the man page for git-bisect
+- have fun
+
+Finding it the old way
+----------------------
+
+[Sat Mar  2 10:32:33 PST 1996 KERNEL_BUG-HOWTO lm@sgi.com (Larry McVoy)]
+
+This is how to track down a bug if you know nothing about kernel hacking.
+It's a brute force approach but it works pretty well.
+
+You need:
+
+        . A reproducible bug - it has to happen predictably (sorry)
+        . All the kernel tar files from a revision that worked to the
+          revision that doesn't
+
+You will then do:
+
+        . Rebuild a revision that you believe works, install, and verify that.
+        . Do a binary search over the kernels to figure out which one
+          introduced the bug.  I.e., suppose 1.3.28 didn't have the bug, but
+          you know that 1.3.69 does.  Pick a kernel in the middle and build
+          that, like 1.3.50.  Build & test; if it works, pick the mid point
+          between .50 and .69, else the mid point between .28 and .50.
+        . You'll narrow it down to the kernel that introduced the bug.  You
+          can probably do better than this but it gets tricky.
+
+        . Narrow it down to a subdirectory
+
+          - Copy kernel that works into "test".  Let's say that 3.62 works,
+            but 3.63 doesn't.  So you diff -r those two kernels and come
+            up with a list of directories that changed.  For each of those
+            directories:
+
+                Copy the non-working directory next to the working directory
+                as "dir.63".
+                One directory at time, try moving the working directory to
+                "dir.62" and mv dir.63 dir"time, try
+
+                        mv dir dir.62
+                        mv dir.63 dir
+                        find dir -name '*.[oa]' -print | xargs rm -f
+
+                And then rebuild and retest.  Assuming that all related
+                changes were contained in the sub directory, this should
+                isolate the change to a directory.
+
+                Problems: changes in header files may have occurred; I've
+                found in my case that they were self explanatory - you may
+                or may not want to give up when that happens.
+
+        . Narrow it down to a file
+
+          - You can apply the same technique to each file in the directory,
+            hoping that the changes in that file are self contained.
+
+        . Narrow it down to a routine
+
+          - You can take the old file and the new file and manually create
+            a merged file that has
+
+                #ifdef VER62
+                routine()
+                {
+                        ...
+                }
+                #else
+                routine()
+                {
+                        ...
+                }
+                #endif
+
+            And then walk through that file, one routine at a time and
+            prefix it with
+
+                #define VER62
+                /* both routines here */
+                #undef VER62
+
+            Then recompile, retest, move the ifdefs until you find the one
+            that makes the difference.
+
+Finally, you take all the info that you have, kernel revisions, bug
+description, the extent to which you have narrowed it down, and pass
+that off to whomever you believe is the maintainer of that section.
+A post to linux.dev.kernel isn't such a bad idea if you've done some
+work to narrow it down.
+
+If you get it down to a routine, you'll probably get a fix in 24 hours.
+
+My apologies to Linus and the other kernel hackers for describing this
+brute force approach, it's hardly what a kernel hacker would do.  However,
+it does work and it lets non-hackers help fix bugs.  And it is cool
+because Linux snapshots will let you do this - something that you can't
+do with vendor supplied releases.
+
+Fixing the bug
+==============
+
+Nobody is going to tell you how to fix bugs. Seriously. You need to work it
+out. But below are some hints on how to use the tools.
+
+To debug a kernel, use objdump and look for the hex offset from the crash
+output to find the valid line of code/assembler. Without debug symbols, you
+will see the assembler code for the routine shown, but if your kernel has
+debug symbols the C code will also be available. (Debug symbols can be enabled
+in the kernel hacking menu of the menu configuration.) For example:
+
+    objdump -r -S -l --disassemble net/dccp/ipv4.o
+
+NB.: you need to be at the top level of the kernel tree for this to pick up
+your C files.
+
+If you don't have access to the code you can also debug on some crash dumps
+e.g. crash dump output as shown by Dave Miller.
+
+>    EIP is at ip_queue_xmit+0x14/0x4c0
+>     ...
+>    Code: 44 24 04 e8 6f 05 00 00 e9 e8 fe ff ff 8d 76 00 8d bc 27 00 00
+>    00 00 55 57  56 53 81 ec bc 00 00 00 8b ac 24 d0 00 00 00 8b 5d 08
+>    <8b> 83 3c 01 00 00 89 44  24 14 8b 45 28 85 c0 89 44 24 18 0f 85
+>
+>    Put the bytes into a "foo.s" file like this:
+>
+>           .text
+>           .globl foo
+>    foo:
+>           .byte  .... /* bytes from Code: part of OOPS dump */
+>
+>    Compile it with "gcc -c -o foo.o foo.s" then look at the output of
+>    "objdump --disassemble foo.o".
+>
+>    Output:
+>
+>    ip_queue_xmit:
+>        push       %ebp
+>        push       %edi
+>        push       %esi
+>        push       %ebx
+>        sub        $0xbc, %esp
+>        mov        0xd0(%esp), %ebp        ! %ebp = arg0 (skb)
+>        mov        0x8(%ebp), %ebx         ! %ebx = skb->sk
+>        mov        0x13c(%ebx), %eax       ! %eax = inet_sk(sk)->opt
+
+In addition, you can use GDB to figure out the exact file and line
+number of the OOPS from the vmlinux file. If you have
+CONFIG_DEBUG_INFO enabled, you can simply copy the EIP value from the
+OOPS:
+
+ EIP:    0060:[<c021e50e>]    Not tainted VLI
+
+And use GDB to translate that to human-readable form:
+
+  gdb vmlinux
+  (gdb) l *0xc021e50e
+
+If you don't have CONFIG_DEBUG_INFO enabled, you use the function
+offset from the OOPS:
+
+ EIP is at vt_ioctl+0xda8/0x1482
+
+And recompile the kernel with CONFIG_DEBUG_INFO enabled:
+
+  make vmlinux
+  gdb vmlinux
+  (gdb) p vt_ioctl
+  (gdb) l *(0x<address of vt_ioctl> + 0xda8)
+or, as one command
+  (gdb) l *(vt_ioctl + 0xda8)
+
+If you have a call trace, such as :-
+>Call Trace:
+> [<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5
+> [<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e
+> [<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee
+> ...
+this shows the problem in the :jbd: module. You can load that module in gdb
+and list the relevant code.
+  gdb fs/jbd/jbd.ko
+  (gdb) p log_wait_commit
+  (gdb) l *(0x<address> + 0xa3)
+or
+  (gdb) l *(log_wait_commit + 0xa3)
+
+
+Another very useful option of the Kernel Hacking section in menuconfig is
+Debug memory allocations. This will help you see whether data has been
+initialised and not set before use etc. To see the values that get assigned
+with this look at mm/slab.c and search for POISON_INUSE. When using this an
+Oops will often show the poisoned data instead of zero which is the default.
+
+Once you have worked out a fix please submit it upstream. After all open
+source is about sharing what you do and don't you want to be recognised for
+your genius?
+
+Please do read Documentation/SubmittingPatches though to help your code get
+accepted.

linux-imx/Documentation/Changes

diff --git a/linux-imx/Documentation/Changes b/linux-imx/Documentation/Changes
new file mode 100644
index 0000000..b175808
--- /dev/null
+++ b/linux-imx/Documentation/Changes
@@ -0,0 +1,415 @@
+Intro
+=====
+
+This document is designed to provide a list of the minimum levels of
+software necessary to run the 3.0 kernels.
+
+This document is originally based on my "Changes" file for 2.0.x kernels
+and therefore owes credit to the same people as that file (Jared Mauch,
+Axel Boldt, Alessandro Sigala, and countless other users all over the
+'net).
+
+Current Minimal Requirements
+============================
+
+Upgrade to at *least* these software revisions before thinking you've
+encountered a bug!  If you're unsure what version you're currently
+running, the suggested command should tell you.
+
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel.  Also, not all tools are necessary on all
+systems; obviously, if you don't have any ISDN hardware, for example,
+you probably needn't concern yourself with isdn4k-utils.
+
+o  Gnu C                  3.2                     # gcc --version
+o  Gnu make               3.80                    # make --version
+o  binutils               2.12                    # ld -v
+o  util-linux             2.10o                   # fdformat --version
+o  module-init-tools      0.9.10                  # depmod -V
+o  e2fsprogs              1.41.4                  # e2fsck -V
+o  jfsutils               1.1.3                   # fsck.jfs -V
+o  reiserfsprogs          3.6.3                   # reiserfsck -V
+o  xfsprogs               2.6.0                   # xfs_db -V
+o  squashfs-tools         4.0                     # mksquashfs -version
+o  btrfs-progs            0.18                    # btrfsck
+o  pcmciautils            004                     # pccardctl -V
+o  quota-tools            3.09                    # quota -V
+o  PPP                    2.4.0                   # pppd --version
+o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
+o  nfs-utils              1.0.5                   # showmount --version
+o  procps                 3.2.0                   # ps --version
+o  oprofile               0.9                     # oprofiled --version
+o  udev                   081                     # udevd --version
+o  grub                   0.93                    # grub --version || grub-install --version
+o  mcelog                 0.6                     # mcelog --version
+o  iptables               1.4.2                   # iptables -V
+
+
+Kernel compilation
+==================
+
+GCC
+---
+
+The gcc version requirements may vary depending on the type of CPU in your
+computer.
+
+Make
+----
+
+You will need Gnu make 3.80 or later to build the kernel.
+
+Binutils
+--------
+
+Linux on IA-32 has recently switched from using as86 to using gas for
+assembling the 16-bit boot code, removing the need for as86 to compile
+your kernel.  This change does, however, mean that you need a recent
+release of binutils.
+
+Perl
+----
+
+You will need perl 5 and the following modules: Getopt::Long, Getopt::Std,
+File::Basename, and File::Find to build the kernel.
+
+
+System utilities
+================
+
+Architectural changes
+---------------------
+
+DevFS has been obsoleted in favour of udev
+(http://www.kernel.org/pub/linux/utils/kernel/hotplug/)
+
+32-bit UID support is now in place.  Have fun!
+
+Linux documentation for functions is transitioning to inline
+documentation via specially-formatted comments near their
+definitions in the source.  These comments can be combined with the
+SGML templates in the Documentation/DocBook directory to make DocBook
+files, which can then be converted by DocBook stylesheets to PostScript,
+HTML, PDF files, and several other formats.  In order to convert from
+DocBook format to a format of your choice, you'll need to install Jade as
+well as the desired DocBook stylesheets.
+
+Util-linux
+----------
+
+New versions of util-linux provide *fdisk support for larger disks,
+support new options to mount, recognize more supported partition
+types, have a fdformat which works with 2.4 kernels, and similar goodies.
+You'll probably want to upgrade.
+
+Ksymoops
+--------
+
+If the unthinkable happens and your kernel oopses, you may need the
+ksymoops tool to decode it, but in most cases you don't.
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops).  If for some reason your kernel
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
+
+Module-Init-Tools
+-----------------
+
+A new module loader is now in the kernel that requires module-init-tools
+to use.  It is backward compatible with the 2.4.x series kernels.
+
+Mkinitrd
+--------
+
+These changes to the /lib/modules file tree layout also require that
+mkinitrd be upgraded.
+
+E2fsprogs
+---------
+
+The latest version of e2fsprogs fixes several bugs in fsck and
+debugfs.  Obviously, it's a good idea to upgrade.
+
+JFSutils
+--------
+
+The jfsutils package contains the utilities for the file system.
+The following utilities are available:
+o fsck.jfs - initiate replay of the transaction log, and check
+  and repair a JFS formatted partition.
+o mkfs.jfs - create a JFS formatted partition.
+o other file system utilities are also available in this package.
+
+Reiserfsprogs
+-------------
+
+The reiserfsprogs package should be used for reiserfs-3.6.x
+(Linux kernels 2.4.x). It is a combined package and contains working
+versions of mkreiserfs, resize_reiserfs, debugreiserfs and
+reiserfsck. These utils work on both i386 and alpha platforms.
+
+Xfsprogs
+--------
+
+The latest version of xfsprogs contains mkfs.xfs, xfs_db, and the
+xfs_repair utilities, among others, for the XFS filesystem.  It is
+architecture independent and any version from 2.0.0 onward should
+work correctly with this version of the XFS kernel code (2.6.0 or
+later is recommended, due to some significant improvements).
+
+PCMCIAutils
+-----------
+
+PCMCIAutils replaces pcmcia-cs (see below). It properly sets up
+PCMCIA sockets at system startup and loads the appropriate modules
+for 16-bit PCMCIA devices if the kernel is modularized and the hotplug
+subsystem is used.
+
+Pcmcia-cs
+---------
+
+PCMCIA (PC Card) support is now partially implemented in the main
+kernel source. The "pcmciautils" package (see above) replaces pcmcia-cs
+for newest kernels.
+
+Quota-tools
+-----------
+
+Support for 32 bit uid's and gid's is required if you want to use
+the newer version 2 quota format.  Quota-tools version 3.07 and
+newer has this support.  Use the recommended version or newer
+from the table above.
+
+Intel IA32 microcode
+--------------------
+
+A driver has been added to allow updating of Intel IA32 microcode,
+accessible as a normal (misc) character device.  If you are not using
+udev you may need to:
+
+mkdir /dev/cpu
+mknod /dev/cpu/microcode c 10 184
+chmod 0644 /dev/cpu/microcode
+
+as root before you can use this.  You'll probably also want to
+get the user-space microcode_ctl utility to use with this.
+
+Powertweak
+----------
+
+If you are running v0.1.17 or earlier, you should upgrade to
+version v0.99.0 or higher. Running old versions may cause problems
+with programs using shared memory.
+
+udev
+----
+udev is a userspace application for populating /dev dynamically with
+only entries for devices actually present.  udev replaces the basic
+functionality of devfs, while allowing persistent device naming for
+devices.
+
+FUSE
+----
+
+Needs libfuse 2.4.0 or later.  Absolute minimum is 2.3.0 but mount
+options 'direct_io' and 'kernel_cache' won't work.
+
+Networking
+==========
+
+General changes
+---------------
+
+If you have advanced network configuration needs, you should probably
+consider using the network tools from ip-route2.
+
+Packet Filter / NAT
+-------------------
+The packet filtering and NAT code uses the same tools like the previous 2.4.x
+kernel series (iptables).  It still includes backwards-compatibility modules
+for 2.2.x-style ipchains and 2.0.x-style ipfwadm.
+
+PPP
+---
+
+The PPP driver has been restructured to support multilink and to
+enable it to operate over diverse media layers.  If you use PPP,
+upgrade pppd to at least 2.4.0.
+
+If you are not using udev, you must have the device file /dev/ppp
+which can be made by:
+
+mknod /dev/ppp c 108 0
+
+as root.
+
+Isdn4k-utils
+------------
+
+Due to changes in the length of the phone number field, isdn4k-utils
+needs to be recompiled or (preferably) upgraded.
+
+NFS-utils
+---------
+
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS.  This
+information would be given to the kernel by "mountd" when the client
+mounted the filesystem, or by "exportfs" at system startup.  exportfs
+would take information about active clients from /var/lib/nfs/rmtab.
+
+This approach is quite fragile as it depends on rmtab being correct
+which is not always easy, particularly when trying to implement
+fail-over.  Even when the system is working well, rmtab suffers from
+getting lots of old entries that never get removed.
+
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel.  This removes the
+dependency on rmtab and means that the kernel only needs to know about
+currently active clients.
+
+To enable this new functionality, you need to:
+
+  mount -t nfsd nfsd /proc/fs/nfsd
+
+before running exportfs or mountd.  It is recommended that all NFS
+services be protected from the internet-at-large by a firewall where
+that is possible.
+
+mcelog
+------
+
+In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
+as a regular cronjob similar to the x86-64 kernel to process and log
+machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
+events are errors reported by the CPU. Processing them is strongly encouraged.
+All x86-64 kernels since 2.6.4 require the mcelog utility to
+process machine checks.
+
+Getting updated software
+========================
+
+Kernel compilation
+******************
+
+gcc
+---
+o  <ftp://ftp.gnu.org/gnu/gcc/>
+
+Make
+----
+o  <ftp://ftp.gnu.org/gnu/make/>
+
+Binutils
+--------
+o  <ftp://ftp.kernel.org/pub/linux/devel/binutils/>
+
+System utilities
+****************
+
+Util-linux
+----------
+o  <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>
+
+Ksymoops
+--------
+o  <ftp://ftp.kernel.org/pub/linux/utils/kernel/ksymoops/v2.4/>
+
+Module-Init-Tools
+-----------------
+o  <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
+
+Mkinitrd
+--------
+o  <https://code.launchpad.net/initrd-tools/main>
+
+E2fsprogs
+---------
+o  <http://prdownloads.sourceforge.net/e2fsprogs/e2fsprogs-1.29.tar.gz>
+
+JFSutils
+--------
+o  <http://jfs.sourceforge.net/>
+
+Reiserfsprogs
+-------------
+o  <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
+
+Xfsprogs
+--------
+o  <ftp://oss.sgi.com/projects/xfs/>
+
+Pcmciautils
+-----------
+o  <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/>
+
+Pcmcia-cs
+---------
+o  <http://pcmcia-cs.sourceforge.net/>
+
+Quota-tools
+----------
+o  <http://sourceforge.net/projects/linuxquota/>
+
+DocBook Stylesheets
+-------------------
+o  <http://nwalsh.com/docbook/dsssl/>
+
+XMLTO XSLT Frontend
+-------------------
+o  <http://cyberelk.net/tim/xmlto/>
+
+Intel P6 microcode
+------------------
+o  <http://www.urbanmyth.org/microcode/>
+
+Powertweak
+----------
+o  <http://powertweak.sourceforge.net/>
+
+udev
+----
+o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
+
+FUSE
+----
+o <http://sourceforge.net/projects/fuse>
+
+mcelog
+------
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
+
+Networking
+**********
+
+PPP
+---
+o  <ftp://ftp.samba.org/pub/ppp/>
+
+Isdn4k-utils
+------------
+o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
+
+NFS-utils
+---------
+o  <http://sourceforge.net/project/showfiles.php?group_id=14>
+
+Iptables
+--------
+o  <http://www.iptables.org/downloads.html>
+
+Ip-route2
+---------
+o  <ftp://ftp.tux.org/pub/net/ip-routing/iproute2-2.2.4-now-ss991023.tar.gz>
+
+OProfile
+--------
+o  <http://oprofile.sf.net/download/>
+
+NFS-Utils
+---------
+o  <http://nfs.sourceforge.net/>
+

linux-imx/Documentation/CodingStyle

diff --git a/linux-imx/Documentation/CodingStyle b/linux-imx/Documentation/CodingStyle
new file mode 100644
index 0000000..e00b8f0
--- /dev/null
+++ b/linux-imx/Documentation/CodingStyle
@@ -0,0 +1,862 @@
+
+		Linux kernel coding style
+
+This is a short document describing the preferred coding style for the
+linux kernel.  Coding style is very personal, and I won't _force_ my
+views on anybody, but this is what goes for anything that I have to be
+able to maintain, and I'd prefer it for most other things too.  Please
+at least consider the points made here.
+
+First off, I'd suggest printing out a copy of the GNU coding standards,
+and NOT read it.  Burn them, it's a great symbolic gesture.
+
+Anyway, here goes:
+
+
+	 	Chapter 1: Indentation
+
+Tabs are 8 characters, and thus indentations are also 8 characters.
+There are heretic movements that try to make indentations 4 (or even 2!)
+characters deep, and that is akin to trying to define the value of PI to
+be 3.
+
+Rationale: The whole idea behind indentation is to clearly define where
+a block of control starts and ends.  Especially when you've been looking
+at your screen for 20 straight hours, you'll find it a lot easier to see
+how the indentation works if you have large indentations.
+
+Now, some people will claim that having 8-character indentations makes
+the code move too far to the right, and makes it hard to read on a
+80-character terminal screen.  The answer to that is that if you need
+more than 3 levels of indentation, you're screwed anyway, and should fix
+your program.
+
+In short, 8-char indents make things easier to read, and have the added
+benefit of warning you when you're nesting your functions too deep.
+Heed that warning.
+
+The preferred way to ease multiple indentation levels in a switch statement is
+to align the "switch" and its subordinate "case" labels in the same column
+instead of "double-indenting" the "case" labels.  E.g.:
+
+	switch (suffix) {
+	case 'G':
+	case 'g':
+		mem <<= 30;
+		break;
+	case 'M':
+	case 'm':
+		mem <<= 20;
+		break;
+	case 'K':
+	case 'k':
+		mem <<= 10;
+		/* fall through */
+	default:
+		break;
+	}
+
+
+Don't put multiple statements on a single line unless you have
+something to hide:
+
+	if (condition) do_this;
+	  do_something_everytime;
+
+Don't put multiple assignments on a single line either.  Kernel coding style
+is super simple.  Avoid tricky expressions.
+
+Outside of comments, documentation and except in Kconfig, spaces are never
+used for indentation, and the above example is deliberately broken.
+
+Get a decent editor and don't leave whitespace at the end of lines.
+
+
+		Chapter 2: Breaking long lines and strings
+
+Coding style is all about readability and maintainability using commonly
+available tools.
+
+The limit on the length of lines is 80 columns and this is a strongly
+preferred limit.
+
+Statements longer than 80 columns will be broken into sensible chunks, unless
+exceeding 80 columns significantly increases readability and does not hide
+information. Descendants are always substantially shorter than the parent and
+are placed substantially to the right. The same applies to function headers
+with a long argument list. However, never break user-visible strings such as
+printk messages, because that breaks the ability to grep for them.
+
+
+		Chapter 3: Placing Braces and Spaces
+
+The other issue that always comes up in C styling is the placement of
+braces.  Unlike the indent size, there are few technical reasons to
+choose one placement strategy over the other, but the preferred way, as
+shown to us by the prophets Kernighan and Ritchie, is to put the opening
+brace last on the line, and put the closing brace first, thusly:
+
+	if (x is true) {
+		we do y
+	}
+
+This applies to all non-function statement blocks (if, switch, for,
+while, do).  E.g.:
+
+	switch (action) {
+	case KOBJ_ADD:
+		return "add";
+	case KOBJ_REMOVE:
+		return "remove";
+	case KOBJ_CHANGE:
+		return "change";
+	default:
+		return NULL;
+	}
+
+However, there is one special case, namely functions: they have the
+opening brace at the beginning of the next line, thus:
+
+	int function(int x)
+	{
+		body of function
+	}
+
+Heretic people all over the world have claimed that this inconsistency
+is ...  well ...  inconsistent, but all right-thinking people know that
+(a) K&R are _right_ and (b) K&R are right.  Besides, functions are
+special anyway (you can't nest them in C).
+
+Note that the closing brace is empty on a line of its own, _except_ in
+the cases where it is followed by a continuation of the same statement,
+ie a "while" in a do-statement or an "else" in an if-statement, like
+this:
+
+	do {
+		body of do-loop
+	} while (condition);
+
+and
+
+	if (x == y) {
+		..
+	} else if (x > y) {
+		...
+	} else {
+		....
+	}
+
+Rationale: K&R.
+
+Also, note that this brace-placement also minimizes the number of empty
+(or almost empty) lines, without any loss of readability.  Thus, as the
+supply of new-lines on your screen is not a renewable resource (think
+25-line terminal screens here), you have more empty lines to put
+comments on.
+
+Do not unnecessarily use braces where a single statement will do.
+
+if (condition)
+	action();
+
+and
+
+if (condition)
+	do_this();
+else
+	do_that();
+
+This does not apply if only one branch of a conditional statement is a single
+statement; in the latter case use braces in both branches:
+
+if (condition) {
+	do_this();
+	do_that();
+} else {
+	otherwise();
+}
+
+		3.1:  Spaces
+
+Linux kernel style for use of spaces depends (mostly) on
+function-versus-keyword usage.  Use a space after (most) keywords.  The
+notable exceptions are sizeof, typeof, alignof, and __attribute__, which look
+somewhat like functions (and are usually used with parentheses in Linux,
+although they are not required in the language, as in: "sizeof info" after
+"struct fileinfo info;" is declared).
+
+So use a space after these keywords:
+	if, switch, case, for, do, while
+but not with sizeof, typeof, alignof, or __attribute__.  E.g.,
+	s = sizeof(struct file);
+
+Do not add spaces around (inside) parenthesized expressions.  This example is
+*bad*:
+
+	s = sizeof( struct file );
+
+When declaring pointer data or a function that returns a pointer type, the
+preferred use of '*' is adjacent to the data name or function name and not
+adjacent to the type name.  Examples:
+
+	char *linux_banner;
+	unsigned long long memparse(char *ptr, char **retptr);
+	char *match_strdup(substring_t *s);
+
+Use one space around (on each side of) most binary and ternary operators,
+such as any of these:
+
+	=  +  -  <  >  *  /  %  |  &  ^  <=  >=  ==  !=  ?  :
+
+but no space after unary operators:
+	&  *  +  -  ~  !  sizeof  typeof  alignof  __attribute__  defined
+
+no space before the postfix increment & decrement unary operators:
+	++  --
+
+no space after the prefix increment & decrement unary operators:
+	++  --
+
+and no space around the '.' and "->" structure member operators.
+
+Do not leave trailing whitespace at the ends of lines.  Some editors with
+"smart" indentation will insert whitespace at the beginning of new lines as
+appropriate, so you can start typing the next line of code right away.
+However, some such editors do not remove the whitespace if you end up not
+putting a line of code there, such as if you leave a blank line.  As a result,
+you end up with lines containing trailing whitespace.
+
+Git will warn you about patches that introduce trailing whitespace, and can
+optionally strip the trailing whitespace for you; however, if applying a series
+of patches, this may make later patches in the series fail by changing their
+context lines.
+
+
+		Chapter 4: Naming
+
+C is a Spartan language, and so should your naming be.  Unlike Modula-2
+and Pascal programmers, C programmers do not use cute names like
+ThisVariableIsATemporaryCounter.  A C programmer would call that
+variable "tmp", which is much easier to write, and not the least more
+difficult to understand.
+
+HOWEVER, while mixed-case names are frowned upon, descriptive names for
+global variables are a must.  To call a global function "foo" is a
+shooting offense.
+
+GLOBAL variables (to be used only if you _really_ need them) need to
+have descriptive names, as do global functions.  If you have a function
+that counts the number of active users, you should call that
+"count_active_users()" or similar, you should _not_ call it "cntusr()".
+
+Encoding the type of a function into the name (so-called Hungarian
+notation) is brain damaged - the compiler knows the types anyway and can
+check those, and it only confuses the programmer.  No wonder MicroSoft
+makes buggy programs.
+
+LOCAL variable names should be short, and to the point.  If you have
+some random integer loop counter, it should probably be called "i".
+Calling it "loop_counter" is non-productive, if there is no chance of it
+being mis-understood.  Similarly, "tmp" can be just about any type of
+variable that is used to hold a temporary value.
+
+If you are afraid to mix up your local variable names, you have another
+problem, which is called the function-growth-hormone-imbalance syndrome.
+See chapter 6 (Functions).
+
+
+		Chapter 5: Typedefs
+
+Please don't use things like "vps_t".
+
+It's a _mistake_ to use typedef for structures and pointers. When you see a
+
+	vps_t a;
+
+in the source, what does it mean?
+
+In contrast, if it says
+
+	struct virtual_container *a;
+
+you can actually tell what "a" is.
+
+Lots of people think that typedefs "help readability". Not so. They are
+useful only for:
+
+ (a) totally opaque objects (where the typedef is actively used to _hide_
+     what the object is).
+
+     Example: "pte_t" etc. opaque objects that you can only access using
+     the proper accessor functions.
+
+     NOTE! Opaqueness and "accessor functions" are not good in themselves.
+     The reason we have them for things like pte_t etc. is that there
+     really is absolutely _zero_ portably accessible information there.
+
+ (b) Clear integer types, where the abstraction _helps_ avoid confusion
+     whether it is "int" or "long".
+
+     u8/u16/u32 are perfectly fine typedefs, although they fit into
+     category (d) better than here.
+
+     NOTE! Again - there needs to be a _reason_ for this. If something is
+     "unsigned long", then there's no reason to do
+
+	typedef unsigned long myflags_t;
+
+     but if there is a clear reason for why it under certain circumstances
+     might be an "unsigned int" and under other configurations might be
+     "unsigned long", then by all means go ahead and use a typedef.
+
+ (c) when you use sparse to literally create a _new_ type for
+     type-checking.
+
+ (d) New types which are identical to standard C99 types, in certain
+     exceptional circumstances.
+
+     Although it would only take a short amount of time for the eyes and
+     brain to become accustomed to the standard types like 'uint32_t',
+     some people object to their use anyway.
+
+     Therefore, the Linux-specific 'u8/u16/u32/u64' types and their
+     signed equivalents which are identical to standard types are
+     permitted -- although they are not mandatory in new code of your
+     own.
+
+     When editing existing code which already uses one or the other set
+     of types, you should conform to the existing choices in that code.
+
+ (e) Types safe for use in userspace.
+
+     In certain structures which are visible to userspace, we cannot
+     require C99 types and cannot use the 'u32' form above. Thus, we
+     use __u32 and similar types in all structures which are shared
+     with userspace.
+
+Maybe there are other cases too, but the rule should basically be to NEVER
+EVER use a typedef unless you can clearly match one of those rules.
+
+In general, a pointer, or a struct that has elements that can reasonably
+be directly accessed should _never_ be a typedef.
+
+
+		Chapter 6: Functions
+
+Functions should be short and sweet, and do just one thing.  They should
+fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24,
+as we all know), and do one thing and do that well.
+
+The maximum length of a function is inversely proportional to the
+complexity and indentation level of that function.  So, if you have a
+conceptually simple function that is just one long (but simple)
+case-statement, where you have to do lots of small things for a lot of
+different cases, it's OK to have a longer function.
+
+However, if you have a complex function, and you suspect that a
+less-than-gifted first-year high-school student might not even
+understand what the function is all about, you should adhere to the
+maximum limits all the more closely.  Use helper functions with
+descriptive names (you can ask the compiler to in-line them if you think
+it's performance-critical, and it will probably do a better job of it
+than you would have done).
+
+Another measure of the function is the number of local variables.  They
+shouldn't exceed 5-10, or you're doing something wrong.  Re-think the
+function, and split it into smaller pieces.  A human brain can
+generally easily keep track of about 7 different things, anything more
+and it gets confused.  You know you're brilliant, but maybe you'd like
+to understand what you did 2 weeks from now.
+
+In source files, separate functions with one blank line.  If the function is
+exported, the EXPORT* macro for it should follow immediately after the closing
+function brace line.  E.g.:
+
+int system_is_up(void)
+{
+	return system_state == SYSTEM_RUNNING;
+}
+EXPORT_SYMBOL(system_is_up);
+
+In function prototypes, include parameter names with their data types.
+Although this is not required by the C language, it is preferred in Linux
+because it is a simple way to add valuable information for the reader.
+
+
+		Chapter 7: Centralized exiting of functions
+
+Albeit deprecated by some people, the equivalent of the goto statement is
+used frequently by compilers in form of the unconditional jump instruction.
+
+The goto statement comes in handy when a function exits from multiple
+locations and some common work such as cleanup has to be done.
+
+The rationale is:
+
+- unconditional statements are easier to understand and follow
+- nesting is reduced
+- errors by not updating individual exit points when making
+    modifications are prevented
+- saves the compiler work to optimize redundant code away ;)
+
+int fun(int a)
+{
+	int result = 0;
+	char *buffer = kmalloc(SIZE);
+
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	if (condition1) {
+		while (loop1) {
+			...
+		}
+		result = 1;
+		goto out;
+	}
+	...
+out:
+	kfree(buffer);
+	return result;
+}
+
+		Chapter 8: Commenting
+
+Comments are good, but there is also a danger of over-commenting.  NEVER
+try to explain HOW your code works in a comment: it's much better to
+write the code so that the _working_ is obvious, and it's a waste of
+time to explain badly written code.
+
+Generally, you want your comments to tell WHAT your code does, not HOW.
+Also, try to avoid putting comments inside a function body: if the
+function is so complex that you need to separately comment parts of it,
+you should probably go back to chapter 6 for a while.  You can make
+small comments to note or warn about something particularly clever (or
+ugly), but try to avoid excess.  Instead, put the comments at the head
+of the function, telling people what it does, and possibly WHY it does
+it.
+
+When commenting the kernel API functions, please use the kernel-doc format.
+See the files Documentation/kernel-doc-nano-HOWTO.txt and scripts/kernel-doc
+for details.
+
+Linux style for comments is the C89 "/* ... */" style.
+Don't use C99-style "// ..." comments.
+
+The preferred style for long (multi-line) comments is:
+
+	/*
+	 * This is the preferred style for multi-line
+	 * comments in the Linux kernel source code.
+	 * Please use it consistently.
+	 *
+	 * Description:  A column of asterisks on the left side,
+	 * with beginning and ending almost-blank lines.
+	 */
+
+For files in net/ and drivers/net/ the preferred style for long (multi-line)
+comments is a little different.
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
+It's also important to comment data, whether they are basic types or derived
+types.  To this end, use just one data declaration per line (no commas for
+multiple data declarations).  This leaves you room for a small comment on each
+item, explaining its use.
+
+
+		Chapter 9: You've made a mess of it
+
+That's OK, we all do.  You've probably been told by your long-time Unix
+user helper that "GNU emacs" automatically formats the C sources for
+you, and you've noticed that yes, it does do that, but the defaults it
+uses are less than desirable (in fact, they are worse than random
+typing - an infinite number of monkeys typing into GNU emacs would never
+make a good program).
+
+So, you can either get rid of GNU emacs, or change it to use saner
+values.  To do the latter, you can stick the following in your .emacs file:
+
+(defun c-lineup-arglist-tabs-only (ignored)
+  "Line up argument lists by tabs, not spaces"
+  (let* ((anchor (c-langelem-pos c-syntactic-element))
+	 (column (c-langelem-2nd-pos c-syntactic-element))
+	 (offset (- (1+ column) anchor))
+	 (steps (floor offset c-basic-offset)))
+    (* (max steps 1)
+       c-basic-offset)))
+
+(add-hook 'c-mode-common-hook
+          (lambda ()
+            ;; Add kernel style
+            (c-add-style
+             "linux-tabs-only"
+             '("linux" (c-offsets-alist
+                        (arglist-cont-nonempty
+                         c-lineup-gcc-asm-reg
+                         c-lineup-arglist-tabs-only))))))
+
+(add-hook 'c-mode-hook
+          (lambda ()
+            (let ((filename (buffer-file-name)))
+              ;; Enable kernel mode for the appropriate files
+              (when (and filename
+                         (string-match (expand-file-name "~/src/linux-trees")
+                                       filename))
+                (setq indent-tabs-mode t)
+                (c-set-style "linux-tabs-only")))))
+
+This will make emacs go better with the kernel coding style for C
+files below ~/src/linux-trees.
+
+But even if you fail in getting emacs to do sane formatting, not
+everything is lost: use "indent".
+
+Now, again, GNU indent has the same brain-dead settings that GNU emacs
+has, which is why you need to give it a few command line options.
+However, that's not too bad, because even the makers of GNU indent
+recognize the authority of K&R (the GNU people aren't evil, they are
+just severely misguided in this matter), so you just give indent the
+options "-kr -i8" (stands for "K&R, 8 character indents"), or use
+"scripts/Lindent", which indents in the latest style.
+
+"indent" has a lot of options, and especially when it comes to comment
+re-formatting you may want to take a look at the man page.  But
+remember: "indent" is not a fix for bad programming.
+
+
+		Chapter 10: Kconfig configuration files
+
+For all of the Kconfig* configuration files throughout the source tree,
+the indentation is somewhat different.  Lines under a "config" definition
+are indented with one tab, while help text is indented an additional two
+spaces.  Example:
+
+config AUDIT
+	bool "Auditing support"
+	depends on NET
+	help
+	  Enable auditing infrastructure that can be used with another
+	  kernel subsystem, such as SELinux (which requires this for
+	  logging of avc messages output).  Does not do system-call
+	  auditing without CONFIG_AUDITSYSCALL.
+
+Seriously dangerous features (such as write support for certain
+filesystems) should advertise this prominently in their prompt string:
+
+config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	...
+
+For full documentation on the configuration files, see the file
+Documentation/kbuild/kconfig-language.txt.
+
+
+		Chapter 11: Data structures
+
+Data structures that have visibility outside the single-threaded
+environment they are created and destroyed in should always have
+reference counts.  In the kernel, garbage collection doesn't exist (and
+outside the kernel garbage collection is slow and inefficient), which
+means that you absolutely _have_ to reference count all your uses.
+
+Reference counting means that you can avoid locking, and allows multiple
+users to have access to the data structure in parallel - and not having
+to worry about the structure suddenly going away from under them just
+because they slept or did something else for a while.
+
+Note that locking is _not_ a replacement for reference counting.
+Locking is used to keep data structures coherent, while reference
+counting is a memory management technique.  Usually both are needed, and
+they are not to be confused with each other.
+
+Many data structures can indeed have two levels of reference counting,
+when there are users of different "classes".  The subclass count counts
+the number of subclass users, and decrements the global count just once
+when the subclass count goes to zero.
+
+Examples of this kind of "multi-level-reference-counting" can be found in
+memory management ("struct mm_struct": mm_users and mm_count), and in
+filesystem code ("struct super_block": s_count and s_active).
+
+Remember: if another thread can find your data structure, and you don't
+have a reference count on it, you almost certainly have a bug.
+
+
+		Chapter 12: Macros, Enums and RTL
+
+Names of macros defining constants and labels in enums are capitalized.
+
+#define CONSTANT 0x12345
+
+Enums are preferred when defining several related constants.
+
+CAPITALIZED macro names are appreciated but macros resembling functions
+may be named in lower case.
+
+Generally, inline functions are preferable to macros resembling functions.
+
+Macros with multiple statements should be enclosed in a do - while block:
+
+#define macrofun(a, b, c) 			\
+	do {					\
+		if (a == 5)			\
+			do_this(b, c);		\
+	} while (0)
+
+Things to avoid when using macros:
+
+1) macros that affect control flow:
+
+#define FOO(x)					\
+	do {					\
+		if (blah(x) < 0)		\
+			return -EBUGGERED;	\
+	} while(0)
+
+is a _very_ bad idea.  It looks like a function call but exits the "calling"
+function; don't break the internal parsers of those who will read the code.
+
+2) macros that depend on having a local variable with a magic name:
+
+#define FOO(val) bar(index, val)
+
+might look like a good thing, but it's confusing as hell when one reads the
+code and it's prone to breakage from seemingly innocent changes.
+
+3) macros with arguments that are used as l-values: FOO(x) = y; will
+bite you if somebody e.g. turns FOO into an inline function.
+
+4) forgetting about precedence: macros defining constants using expressions
+must enclose the expression in parentheses. Beware of similar issues with
+macros using parameters.
+
+#define CONSTANT 0x4000
+#define CONSTEXP (CONSTANT | 3)
+
+The cpp manual deals with macros exhaustively. The gcc internals manual also
+covers RTL which is used frequently with assembly language in the kernel.
+
+
+		Chapter 13: Printing kernel messages
+
+Kernel developers like to be seen as literate. Do mind the spelling
+of kernel messages to make a good impression. Do not use crippled
+words like "dont"; use "do not" or "don't" instead.  Make the messages
+concise, clear, and unambiguous.
+
+Kernel messages do not have to be terminated with a period.
+
+Printing numbers in parentheses (%d) adds no value and should be avoided.
+
+There are a number of driver model diagnostic macros in <linux/device.h>
+which you should use to make sure messages are matched to the right device
+and driver, and are tagged with the right level:  dev_err(), dev_warn(),
+dev_info(), and so forth.  For messages that aren't associated with a
+particular device, <linux/printk.h> defines pr_debug() and pr_info().
+
+Coming up with good debugging messages can be quite a challenge; and once
+you have them, they can be a huge help for remote troubleshooting.  Such
+messages should be compiled out when the DEBUG symbol is not defined (that
+is, by default they are not included).  When you use dev_dbg() or pr_debug(),
+that's automatic.  Many subsystems have Kconfig options to turn on -DDEBUG.
+A related convention uses VERBOSE_DEBUG to add dev_vdbg() messages to the
+ones already enabled by DEBUG.
+
+
+		Chapter 14: Allocating memory
+
+The kernel provides the following general purpose memory allocators:
+kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and
+vzalloc().  Please refer to the API documentation for further information
+about them.
+
+The preferred form for passing a size of a struct is the following:
+
+	p = kmalloc(sizeof(*p), ...);
+
+The alternative form where struct name is spelled out hurts readability and
+introduces an opportunity for a bug when the pointer variable type is changed
+but the corresponding sizeof that is passed to a memory allocator is not.
+
+Casting the return value which is a void pointer is redundant. The conversion
+from void pointer to any other pointer type is guaranteed by the C programming
+language.
+
+The preferred form for allocating an array is the following:
+
+	p = kmalloc_array(n, sizeof(...), ...);
+
+The preferred form for allocating a zeroed array is the following:
+
+	p = kcalloc(n, sizeof(...), ...);
+
+Both forms check for overflow on the allocation size n * sizeof(...),
+and return NULL if that occurred.
+
+
+		Chapter 15: The inline disease
+
+There appears to be a common misperception that gcc has a magic "make me
+faster" speedup option called "inline". While the use of inlines can be
+appropriate (for example as a means of replacing macros, see Chapter 12), it
+very often is not. Abundant use of the inline keyword leads to a much bigger
+kernel, which in turn slows the system as a whole down, due to a bigger
+icache footprint for the CPU and simply because there is less memory
+available for the pagecache. Just think about it; a pagecache miss causes a
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
+
+A reasonable rule of thumb is to not put inline at functions that have more
+than 3 lines of code in them. An exception to this rule are the cases where
+a parameter is known to be a compiletime constant, and as a result of this
+constantness you *know* the compiler will be able to optimize most of your
+function away at compile time. For a good example of this later case, see
+the kmalloc() inline function.
+
+Often people argue that adding inline to functions that are static and used
+only once is always a win since there is no space tradeoff. While this is
+technically correct, gcc is capable of inlining these automatically without
+help, and the maintenance issue of removing the inline when a second user
+appears outweighs the potential value of the hint that tells gcc to do
+something it would have done anyway.
+
+
+		Chapter 16: Function return values and names
+
+Functions can return values of many different kinds, and one of the
+most common is a value indicating whether the function succeeded or
+failed.  Such a value can be represented as an error-code integer
+(-Exxx = failure, 0 = success) or a "succeeded" boolean (0 = failure,
+non-zero = success).
+
+Mixing up these two sorts of representations is a fertile source of
+difficult-to-find bugs.  If the C language included a strong distinction
+between integers and booleans then the compiler would find these mistakes
+for us... but it doesn't.  To help prevent such bugs, always follow this
+convention:
+
+	If the name of a function is an action or an imperative command,
+	the function should return an error-code integer.  If the name
+	is a predicate, the function should return a "succeeded" boolean.
+
+For example, "add work" is a command, and the add_work() function returns 0
+for success or -EBUSY for failure.  In the same way, "PCI device present" is
+a predicate, and the pci_dev_present() function returns 1 if it succeeds in
+finding a matching device or 0 if it doesn't.
+
+All EXPORTed functions must respect this convention, and so should all
+public functions.  Private (static) functions need not, but it is
+recommended that they do.
+
+Functions whose return value is the actual result of a computation, rather
+than an indication of whether the computation succeeded, are not subject to
+this rule.  Generally they indicate failure by returning some out-of-range
+result.  Typical examples would be functions that return pointers; they use
+NULL or the ERR_PTR mechanism to report failure.
+
+
+		Chapter 17:  Don't re-invent the kernel macros
+
+The header file include/linux/kernel.h contains a number of macros that
+you should use, rather than explicitly coding some variant of them yourself.
+For example, if you need to calculate the length of an array, take advantage
+of the macro
+
+  #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+Similarly, if you need to calculate the size of some structure member, use
+
+  #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+
+There are also min() and max() macros that do strict type checking if you
+need them.  Feel free to peruse that header file to see what else is already
+defined that you shouldn't reproduce in your code.
+
+
+		Chapter 18:  Editor modelines and other cruft
+
+Some editors can interpret configuration information embedded in source files,
+indicated with special markers.  For example, emacs interprets lines marked
+like this:
+
+-*- mode: c -*-
+
+Or like this:
+
+/*
+Local Variables:
+compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c"
+End:
+*/
+
+Vim interprets markers that look like this:
+
+/* vim:set sw=8 noet */
+
+Do not include any of these in source files.  People have their own personal
+editor configurations, and your source files should not override them.  This
+includes markers for indentation and mode configuration.  People may use their
+own custom mode, or may have some other magic method for making indentation
+work correctly.
+
+
+		Chapter 19:  Inline assembly
+
+In architecture-specific code, you may need to use inline assembly to interface
+with CPU or platform functionality.  Don't hesitate to do so when necessary.
+However, don't use inline assembly gratuitously when C can do the job.  You can
+and should poke hardware from C when possible.
+
+Consider writing simple helper functions that wrap common bits of inline
+assembly, rather than repeatedly writing them with slight variations.  Remember
+that inline assembly can use C parameters.
+
+Large, non-trivial assembly functions should go in .S files, with corresponding
+C prototypes defined in C header files.  The C prototypes for assembly
+functions should use "asmlinkage".
+
+You may need to mark your asm statement as volatile, to prevent GCC from
+removing it if GCC doesn't notice any side effects.  You don't always need to
+do so, though, and doing so unnecessarily can limit optimization.
+
+When writing a single inline assembly statement containing multiple
+instructions, put each instruction on a separate line in a separate quoted
+string, and end each string except the last with \n\t to properly indent the
+next instruction in the assembly output:
+
+	asm ("magic %reg1, #42\n\t"
+	     "more_magic %reg2, %reg3"
+	     : /* outputs */ : /* inputs */ : /* clobbers */);
+
+
+
+		Appendix I: References
+
+The C Programming Language, Second Edition
+by Brian W. Kernighan and Dennis M. Ritchie.
+Prentice Hall, Inc., 1988.
+ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback).
+URL: http://cm.bell-labs.com/cm/cs/cbook/
+
+The Practice of Programming
+by Brian W. Kernighan and Rob Pike.
+Addison-Wesley, Inc., 1999.
+ISBN 0-201-61586-X.
+URL: http://cm.bell-labs.com/cm/cs/tpop/
+
+GNU manuals - where in compliance with K&R and this text - for cpp, gcc,
+gcc internals and indent, all available from http://www.gnu.org/manual/
+
+WG14 is the international standardization working group for the programming
+language C, URL: http://www.open-std.org/JTC1/SC22/WG14/
+
+Kernel CodingStyle, by greg@kroah.com at OLS 2002:
+http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
+

linux-imx/Documentation/DMA-API-HOWTO.txt

diff --git a/linux-imx/Documentation/DMA-API-HOWTO.txt b/linux-imx/Documentation/DMA-API-HOWTO.txt
new file mode 100644
index 0000000..14129f1
--- /dev/null
+++ b/linux-imx/Documentation/DMA-API-HOWTO.txt
@@ -0,0 +1,908 @@
+		     Dynamic DMA mapping Guide
+		     =========================
+
+		 David S. Miller <davem@redhat.com>
+		 Richard Henderson <rth@cygnus.com>
+		  Jakub Jelinek <jakub@redhat.com>
+
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code.  For a concise description of the API, see
+DMA-API.txt.
+
+Most of the 64bit platforms have special hardware that translates bus
+addresses (DMA addresses) into physical addresses.  This is similar to
+how page tables and/or a TLB translates virtual addresses to physical
+addresses on a CPU.  This is needed so that e.g. PCI devices can
+access with a Single Address Cycle (32bit DMA address) any page in the
+64bit physical address space.  Previously in Linux those 64bit
+platforms had to set artificial limits on the maximum RAM size in the
+system, so that the virt_to_bus() static scheme works (the DMA address
+translation tables were simply filled on bootup to map each bus
+address to the physical page __pa(bus_to_virt())).
+
+So that Linux can use the dynamic DMA mapping, it needs some help from the
+drivers, namely it has to take into account that DMA addresses should be
+mapped only for the time they are actually used and unmapped after the DMA
+transfer.
+
+The following API will work of course even on platforms where no such
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than
+the bus specific DMA API (e.g. pci_dma_*).
+
+First of all, you should make sure
+
+#include <linux/dma-mapping.h>
+
+is in your driver. This file will obtain for you the definition of the
+dma_addr_t (which can hold any valid DMA address for the platform)
+type which should be used everywhere you hold a DMA (bus) address
+returned from the DMA mapping functions.
+
+			 What memory is DMA'able?
+
+The first piece of information you must know is what kernel memory can
+be used with the DMA mapping facilities.  There has been an unwritten
+set of rules regarding this, and this text is an attempt to finally
+write them down.
+
+If you acquired your memory via the page allocator
+(i.e. __get_free_page*()) or the generic memory allocators
+(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
+that memory using the addresses returned from those routines.
+
+This means specifically that you may _not_ use the memory/addresses
+returned from vmalloc() for DMA.  It is possible to DMA to the
+_underlying_ memory mapped into a vmalloc() area, but this requires
+walking page tables to get the physical addresses, and then
+translating each of those pages back to a kernel address using
+something like __va().  [ EDIT: Update this when we integrate
+Gerd Knorr's generic code which does this. ]
+
+This rule also means that you may use neither kernel image addresses
+(items in data/text/bss segments), nor module image addresses, nor
+stack addresses for DMA.  These could all be mapped somewhere entirely
+different than the rest of physical memory.  Even if those classes of
+memory could physically work with DMA, you'd need to ensure the I/O
+buffers were cacheline-aligned.  Without that, you'd see cacheline
+sharing problems (data corruption) on CPUs with DMA-incoherent caches.
+(The CPU could write to one word, DMA would write to a different one
+in the same cache line, and one of them could be overwritten.)
+
+Also, this means that you cannot take the return of a kmap()
+call and DMA to/from that.  This is similar to vmalloc().
+
+What about block I/O and networking buffers?  The block I/O and
+networking subsystems make sure that the buffers they use are valid
+for you to DMA from/to.
+
+			DMA addressing limitations
+
+Does your device have any DMA addressing limitations?  For example, is
+your device only capable of driving the low order 24-bits of address?
+If so, you need to inform the kernel of this fact.
+
+By default, the kernel assumes that your device can address the full
+32-bits.  For a 64-bit capable device, this needs to be increased.
+And for a device with limitations, as discussed in the previous
+paragraph, it needs to be decreased.
+
+Special note about PCI: PCI-X specification requires PCI-X devices to
+support 64-bit addressing (DAC) for all transactions.  And at least
+one platform (SGI SN2) requires 64-bit consistent allocations to
+operate correctly when the IO bus is in PCI-X mode.
+
+For correct operation, you must interrogate the kernel in your device
+probe routine to see if the DMA controller on the machine can properly
+support the DMA addressing limitation your device has.  It is good
+style to do this even if your device holds the default setting,
+because this shows that you did think about these issues wrt. your
+device.
+
+The query is performed via a call to dma_set_mask():
+
+	int dma_set_mask(struct device *dev, u64 mask);
+
+The query for consistent allocations is performed via a call to
+dma_set_coherent_mask():
+
+	int dma_set_coherent_mask(struct device *dev, u64 mask);
+
+Here, dev is a pointer to the device struct of your device, and mask
+is a bit mask describing which bits of an address your device
+supports.  It returns zero if your card can perform DMA properly on
+the machine given the address mask you provided.  In general, the
+device struct of your device is embedded in the bus specific device
+struct of your device.  For example, a pointer to the device struct of
+your PCI device is pdev->dev (pdev is a pointer to the PCI device
+struct of your device).
+
+If it returns non-zero, your device cannot perform DMA properly on
+this platform, and attempting to do so will result in undefined
+behavior.  You must either use a different mask, or not use DMA.
+
+This means that in the failure case, you have three options:
+
+1) Use another DMA mask, if possible (see below).
+2) Use some non-DMA mode for data transfer, if possible.
+3) Ignore this device and do not initialize it.
+
+It is recommended that your driver print a kernel KERN_WARNING message
+when you end up performing either #2 or #3.  In this manner, if a user
+of your driver reports that performance is bad or that the device is not
+even detected, you can ask them for the kernel messages to find out
+exactly why.
+
+The standard 32-bit addressing device would do something like this:
+
+	if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
+		printk(KERN_WARNING
+		       "mydev: No suitable DMA available.\n");
+		goto ignore_this_device;
+	}
+
+Another common scenario is a 64-bit capable device.  The approach here
+is to try for 64-bit addressing, but back down to a 32-bit mask that
+should not fail.  The kernel may fail the 64-bit mask not because the
+platform is not capable of 64-bit addressing.  Rather, it may fail in
+this case simply because 32-bit addressing is done more efficiently
+than 64-bit addressing.  For example, Sparc64 PCI SAC addressing is
+more efficient than DAC addressing.
+
+Here is how you would handle a 64-bit capable device which can drive
+all 64-bits when accessing streaming DMA:
+
+	int using_dac;
+
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+		using_dac = 1;
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
+		using_dac = 0;
+	} else {
+		printk(KERN_WARNING
+		       "mydev: No suitable DMA available.\n");
+		goto ignore_this_device;
+	}
+
+If a card is capable of using 64-bit consistent allocations as well,
+the case would look like this:
+
+	int using_dac, consistent_using_dac;
+
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+		using_dac = 1;
+	   	consistent_using_dac = 1;
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
+		using_dac = 0;
+		consistent_using_dac = 0;
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+	} else {
+		printk(KERN_WARNING
+		       "mydev: No suitable DMA available.\n");
+		goto ignore_this_device;
+	}
+
+dma_set_coherent_mask() will always be able to set the same or a
+smaller mask as dma_set_mask(). However for the rare case that a
+device driver only uses consistent allocations, one would have to
+check the return value from dma_set_coherent_mask().
+
+Finally, if your device can only drive the low 24-bits of
+address you might do something like:
+
+	if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
+		printk(KERN_WARNING
+		       "mydev: 24-bit DMA addressing not available.\n");
+		goto ignore_this_device;
+	}
+
+When dma_set_mask() is successful, and returns zero, the kernel saves
+away this mask you have provided.  The kernel will use this
+information later when you make DMA mappings.
+
+There is a case which we are aware of at this time, which is worth
+mentioning in this documentation.  If your device supports multiple
+functions (for example a sound card provides playback and record
+functions) and the various different functions have _different_
+DMA addressing limitations, you may wish to probe each mask and
+only provide the functionality which the machine can handle.  It
+is important that the last call to dma_set_mask() be for the
+most specific mask.
+
+Here is pseudo-code showing how this might be done:
+
+	#define PLAYBACK_ADDRESS_BITS	DMA_BIT_MASK(32)
+	#define RECORD_ADDRESS_BITS	DMA_BIT_MASK(24)
+
+	struct my_sound_card *card;
+	struct device *dev;
+
+	...
+	if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
+		card->playback_enabled = 1;
+	} else {
+		card->playback_enabled = 0;
+		printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
+		       card->name);
+	}
+	if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
+		card->record_enabled = 1;
+	} else {
+		card->record_enabled = 0;
+		printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
+		       card->name);
+	}
+
+A sound card was used as an example here because this genre of PCI
+devices seems to be littered with ISA chips given a PCI front end,
+and thus retaining the 16MB DMA addressing limitations of ISA.
+
+			Types of DMA mappings
+
+There are two types of DMA mappings:
+
+- Consistent DMA mappings which are usually mapped at driver
+  initialization, unmapped at the end and for which the hardware should
+  guarantee that the device and the CPU can access the data
+  in parallel and will see updates made by each other without any
+  explicit software flushing.
+
+  Think of "consistent" as "synchronous" or "coherent".
+
+  The current default is to return consistent memory in the low 32
+  bits of the bus space.  However, for future compatibility you should
+  set the consistent mask even if this default is fine for your
+  driver.
+
+  Good examples of what to use consistent mappings for are:
+
+	- Network card DMA ring descriptors.
+	- SCSI adapter mailbox command data structures.
+	- Device firmware microcode executed out of
+	  main memory.
+
+  The invariant these examples all require is that any CPU store
+  to memory is immediately visible to the device, and vice
+  versa.  Consistent mappings guarantee this.
+
+  IMPORTANT: Consistent DMA memory does not preclude the usage of
+             proper memory barriers.  The CPU may reorder stores to
+	     consistent memory just as it may normal memory.  Example:
+	     if it is important for the device to see the first word
+	     of a descriptor updated before the second, you must do
+	     something like:
+
+		desc->word0 = address;
+		wmb();
+		desc->word1 = DESC_VALID;
+
+             in order to get correct behavior on all platforms.
+
+	     Also, on some platforms your driver may need to flush CPU write
+	     buffers in much the same way as it needs to flush write buffers
+	     found in PCI bridges (such as by reading a register's value
+	     after writing it).
+
+- Streaming DMA mappings which are usually mapped for one DMA
+  transfer, unmapped right after it (unless you use dma_sync_* below)
+  and for which hardware can optimize for sequential accesses.
+
+  This of "streaming" as "asynchronous" or "outside the coherency
+  domain".
+
+  Good examples of what to use streaming mappings for are:
+
+	- Networking buffers transmitted/received by a device.
+	- Filesystem buffers written/read by a SCSI device.
+
+  The interfaces for using this type of mapping were designed in
+  such a way that an implementation can make whatever performance
+  optimizations the hardware allows.  To this end, when using
+  such mappings you must be explicit about what you want to happen.
+
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
+Also, systems with caches that aren't DMA-coherent will work better
+when the underlying buffers don't share cache lines with other data.
+
+
+		 Using Consistent DMA mappings.
+
+To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
+you should do:
+
+	dma_addr_t dma_handle;
+
+	cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
+
+where device is a struct device *. This may be called in interrupt
+context with the GFP_ATOMIC flag.
+
+Size is the length of the region you want to allocate, in bytes.
+
+This routine will allocate RAM for that region, so it acts similarly to
+__get_free_pages (but takes size instead of a page order).  If your
+driver needs regions sized smaller than a page, you may prefer using
+the dma_pool interface, described below.
+
+The consistent DMA mapping interfaces, for non-NULL dev, will by
+default return a DMA address which is 32-bit addressable.  Even if the
+device indicates (via DMA mask) that it may address the upper 32-bits,
+consistent allocation will only return > 32-bit addresses for DMA if
+the consistent DMA mask has been explicitly changed via
+dma_set_coherent_mask().  This is true of the dma_pool interface as
+well.
+
+dma_alloc_coherent returns two values: the virtual address which you
+can use to access it from the CPU and dma_handle which you pass to the
+card.
+
+The cpu return address and the DMA bus master address are both
+guaranteed to be aligned to the smallest PAGE_SIZE order which
+is greater than or equal to the requested size.  This invariant
+exists (for example) to guarantee that if you allocate a chunk
+which is smaller than or equal to 64 kilobytes, the extent of the
+buffer you receive will not cross a 64K boundary.
+
+To unmap and free such a DMA region, you call:
+
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent returned to you.
+This function may not be called in interrupt context.
+
+If your driver needs lots of smaller memory regions, you can write
+custom code to subdivide pages returned by dma_alloc_coherent,
+or you can use the dma_pool API to do that.  A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
+Also, it understands common hardware constraints for alignment,
+like queue heads needing to be aligned on N byte boundaries.
+
+Create a dma_pool like this:
+
+	struct dma_pool *pool;
+
+	pool = dma_pool_create(name, dev, size, align, alloc);
+
+The "name" is for diagnostics (like a kmem_cache name); dev and size
+are as above.  The device's hardware alignment requirement for this
+type of data is "align" (which is expressed in bytes, and must be a
+power of two).  If your device has no boundary crossing restrictions,
+pass 0 for alloc; passing 4096 says memory allocated from this pool
+must not cross 4KByte boundaries (but at that time it may be better to
+go for dma_alloc_coherent directly instead).
+
+Allocate memory from a dma pool like this:
+
+	cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
+
+flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
+holding SMP locks), SLAB_ATOMIC otherwise.  Like dma_alloc_coherent,
+this returns two values, cpu_addr and dma_handle.
+
+Free memory that was allocated from a dma_pool like this:
+
+	dma_pool_free(pool, cpu_addr, dma_handle);
+
+where pool is what you passed to dma_pool_alloc, and cpu_addr and
+dma_handle are the values dma_pool_alloc returned. This function
+may be called in interrupt context.
+
+Destroy a dma_pool by calling:
+
+	dma_pool_destroy(pool);
+
+Make sure you've called dma_pool_free for all memory allocated
+from a pool before you destroy the pool. This function may not
+be called in interrupt context.
+
+			DMA Direction
+
+The interfaces described in subsequent portions of this document
+take a DMA direction argument, which is an integer and takes on
+one of the following values:
+
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
+
+One should provide the exact DMA direction if you know it.
+
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
+It is the direction in which the data moves during the DMA
+transfer.
+
+You are _strongly_ encouraged to specify this as precisely
+as you possibly can.
+
+If you absolutely cannot know the direction of the DMA transfer,
+specify DMA_BIDIRECTIONAL.  It means that the DMA can go in
+either direction.  The platform guarantees that you may legally
+specify this, and that it will work, but this may be at the
+cost of performance for example.
+
+The value DMA_NONE is to be used for debugging.  One can
+hold this in a data structure before you come to know the
+precise direction, and this will help catch cases where your
+direction tracking logic has failed to set things up properly.
+
+Another advantage of specifying this value precisely (outside of
+potential platform-specific optimizations of such) is for debugging.
+Some platforms actually have a write permission boolean which DMA
+mappings can be marked with, much like page protections in the user
+program address space.  Such platforms can and do report errors in the
+kernel logs when the DMA controller hardware detects violation of the
+permission setting.
+
+Only streaming mappings specify a direction, consistent mappings
+implicitly have a direction attribute setting of
+DMA_BIDIRECTIONAL.
+
+The SCSI subsystem tells you the direction to use in the
+'sc_data_direction' member of the SCSI command your driver is
+working on.
+
+For Networking drivers, it's a rather simple affair.  For transmit
+packets, map/unmap them with the DMA_TO_DEVICE direction
+specifier.  For receive packets, just the opposite, map/unmap them
+with the DMA_FROM_DEVICE direction specifier.
+
+		  Using Streaming DMA mappings
+
+The streaming DMA mapping routines can be called from interrupt
+context.  There are two versions of each map/unmap, one which will
+map/unmap a single memory region, and one which will map/unmap a
+scatterlist.
+
+To map a single region, you do:
+
+	struct device *dev = &my_dev->dev;
+	dma_addr_t dma_handle;
+	void *addr = buffer->ptr;
+	size_t size = buffer->len;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+and to unmap it:
+
+	dma_unmap_single(dev, dma_handle, size, direction);
+
+You should call dma_mapping_error() as dma_map_single() could fail and return
+error. Not all dma implementations support dma_mapping_error() interface.
+However, it is a good practice to call dma_mapping_error() interface, which
+will invoke the generic mapping error check interface. Doing so will ensure
+that the mapping code will work correctly on all dma implementations without
+any dependency on the specifics of the underlying implementation. Using the
+returned address without checking for errors could result in failures ranging
+from panics to silent data corruption. A couple of examples of incorrect ways
+to check for errors that make assumptions about the underlying dma
+implementation are as follows and these are applicable to dma_map_page() as
+well.
+
+Incorrect example 1:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if ((dma_handle & 0xffff != 0) || (dma_handle >= 0x1000000)) {
+		goto map_error;
+	}
+
+Incorrect example 2:
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_handle == DMA_ERROR_CODE) {
+		goto map_error;
+	}
+
+You should call dma_unmap_single when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
+Using cpu pointers like this for single mappings has a disadvantage,
+you cannot reference HIGHMEM memory in this way.  Thus, there is a
+map/unmap interface pair akin to dma_{map,unmap}_single.  These
+interfaces deal with page/offset pairs instead of cpu pointers.
+Specifically:
+
+	struct device *dev = &my_dev->dev;
+	dma_addr_t dma_handle;
+	struct page *page = buffer->page;
+	unsigned long offset = buffer->offset;
+	size_t size = buffer->len;
+
+	dma_handle = dma_map_page(dev, page, offset, size, direction);
+	if (dma_mapping_error(dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+	...
+
+	dma_unmap_page(dev, dma_handle, size, direction);
+
+Here, "offset" means byte offset within the given page.
+
+You should call dma_mapping_error() as dma_map_page() could fail and return
+error as outlined under the dma_map_single() discussion.
+
+You should call dma_unmap_page when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
+With scatterlists, you map a region gathered from several regions by:
+
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, count, i) {
+		hw_address[i] = sg_dma_address(sg);
+		hw_len[i] = sg_dma_len(sg);
+	}
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
+consecutive sglist entries can be merged into one provided the first one
+ends and the second one starts on a page boundary - in fact this is a huge
+advantage for cards which either cannot do scatter-gather or have very
+limited number of scatter-gather entries) and returns the actual number
+of sg entries it mapped them to. On failure 0 is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+To unmap a scatterlist, just call:
+
+	dma_unmap_sg(dev, sglist, nents, direction);
+
+Again, make sure DMA activity has already finished.
+
+PLEASE NOTE:  The 'nents' argument to the dma_unmap_sg call must be
+              the _same_ one you passed into the dma_map_sg call,
+	      it should _NOT_ be the 'count' value _returned_ from the
+              dma_map_sg call.
+
+Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
+counterpart, because the bus address space is a shared resource (although
+in some ports the mapping is per each BUS so less devices contend for the
+same bus address space) and you could render the machine unusable by eating
+all bus addresses.
+
+If you need to use the same streaming DMA region multiple times and touch
+the data in between the DMA transfers, the buffer needs to be synced
+properly in order for the cpu and device to see the most uptodate and
+correct copy of the DMA buffer.
+
+So, firstly, just map it with dma_map_{single,sg}, and after each DMA
+transfer call either:
+
+	dma_sync_single_for_cpu(dev, dma_handle, size, direction);
+
+or:
+
+	dma_sync_sg_for_cpu(dev, sglist, nents, direction);
+
+as appropriate.
+
+Then, if you wish to let the device get at the DMA area again,
+finish accessing the data with the cpu, and then before actually
+giving the buffer to the hardware call either:
+
+	dma_sync_single_for_device(dev, dma_handle, size, direction);
+
+or:
+
+	dma_sync_sg_for_device(dev, sglist, nents, direction);
+
+as appropriate.
+
+After the last DMA transfer call one of the DMA unmap routines
+dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
+call till dma_unmap_*, then you don't have to call the dma_sync_*
+routines at all.
+
+Here is pseudo code which shows a situation in which you would need
+to use the dma_sync_*() interfaces.
+
+	my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
+	{
+		dma_addr_t mapping;
+
+		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
+		if (dma_mapping_error(dma_handle)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+
+		cp->rx_buf = buffer;
+		cp->rx_len = len;
+		cp->rx_dma = mapping;
+
+		give_rx_buf_to_card(cp);
+	}
+
+	...
+
+	my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
+	{
+		struct my_card *cp = devid;
+
+		...
+		if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
+			struct my_card_header *hp;
+
+			/* Examine the header to see if we wish
+			 * to accept the data.  But synchronize
+			 * the DMA transfer with the CPU first
+			 * so that we see updated contents.
+			 */
+			dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+						cp->rx_len,
+						DMA_FROM_DEVICE);
+
+			/* Now it is safe to examine the buffer. */
+			hp = (struct my_card_header *) cp->rx_buf;
+			if (header_is_ok(hp)) {
+				dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+						 DMA_FROM_DEVICE);
+				pass_to_upper_layers(cp->rx_buf);
+				make_and_setup_new_rx_buf(cp);
+			} else {
+				/* CPU should not write to
+				 * DMA_FROM_DEVICE-mapped area,
+				 * so dma_sync_single_for_device() is
+				 * not needed here. It would be required
+				 * for DMA_BIDIRECTIONAL mapping if
+				 * the memory was modified.
+				 */
+				give_rx_buf_to_card(cp);
+			}
+		}
+	}
+
+Drivers converted fully to this interface should not use virt_to_bus any
+longer, nor should they use bus_to_virt. Some drivers have to be changed a
+little bit, because there is no longer an equivalent to bus_to_virt in the
+dynamic DMA mapping scheme - you have to always store the DMA addresses
+returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
+calls (dma_map_sg stores them in the scatterlist itself if the platform
+supports dynamic DMA mapping in hardware) in your driver structures and/or
+in the card registers.
+
+All drivers should be using these interfaces with no exceptions.  It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
+they are entirely deprecated.  Some ports already do not provide these
+as it is impossible to correctly support them.
+
+			Handling Errors
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
+
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+  by using dma_mapping_error():
+
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+- unmap pages that are already mapped, when mapping error occurs in the middle
+  of a multiple page mapping attempt. These example are applicable to
+  dma_map_page() as well.
+
+Example 1:
+	dma_addr_t dma_handle1;
+	dma_addr_t dma_handle2;
+
+	dma_handle1 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle1)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling1;
+	}
+	dma_handle2 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle2)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling2;
+	}
+
+	...
+
+	map_error_handling2:
+		dma_unmap_single(dma_handle1);
+	map_error_handling1:
+
+Example 2: (if buffers are allocated in a loop, unmap all mapped buffers when
+	    mapping error is detected in the middle)
+
+	dma_addr_t dma_addr;
+	dma_addr_t array[DMA_BUFFERS];
+	int save_index = 0;
+
+	for (i = 0; i < DMA_BUFFERS; i++) {
+
+		...
+
+		dma_addr = dma_map_single(dev, addr, size, direction);
+		if (dma_mapping_error(dev, dma_addr)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+		array[i].dma_addr = dma_addr;
+		save_index++;
+	}
+
+	...
+
+	map_error_handling:
+
+	for (i = 0; i < save_index; i++) {
+
+		...
+
+		dma_unmap_single(array[i].dma_addr);
+	}
+
+Networking drivers must call dev_kfree_skb to free the socket buffer
+and return NETDEV_TX_OK if the DMA mapping fails on the transmit hook
+(ndo_start_xmit). This means that the socket buffer is just dropped in
+the failure case.
+
+SCSI drivers must return SCSI_MLQUEUE_HOST_BUSY if the DMA mapping
+fails in the queuecommand hook. This means that the SCSI subsystem
+passes the command to the driver again later.
+
+		Optimizing Unmap State Space Consumption
+
+On many platforms, dma_unmap_{single,page}() is simply a nop.
+Therefore, keeping track of the mapping address and length is a waste
+of space.  Instead of filling your drivers up with ifdefs and the like
+to "work around" this (which would defeat the whole purpose of a
+portable API) the following facilities are provided.
+
+Actually, instead of describing the macros one by one, we'll
+transform some example code.
+
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
+   Example, before:
+
+	struct ring_state {
+		struct sk_buff *skb;
+		dma_addr_t mapping;
+		__u32 len;
+	};
+
+   after:
+
+	struct ring_state {
+		struct sk_buff *skb;
+		DEFINE_DMA_UNMAP_ADDR(mapping);
+		DEFINE_DMA_UNMAP_LEN(len);
+	};
+
+2) Use dma_unmap_{addr,len}_set to set these values.
+   Example, before:
+
+	ringp->mapping = FOO;
+	ringp->len = BAR;
+
+   after:
+
+	dma_unmap_addr_set(ringp, mapping, FOO);
+	dma_unmap_len_set(ringp, len, BAR);
+
+3) Use dma_unmap_{addr,len} to access these values.
+   Example, before:
+
+	dma_unmap_single(dev, ringp->mapping, ringp->len,
+			 DMA_FROM_DEVICE);
+
+   after:
+
+	dma_unmap_single(dev,
+			 dma_unmap_addr(ringp, mapping),
+			 dma_unmap_len(ringp, len),
+			 DMA_FROM_DEVICE);
+
+It really should be self-explanatory.  We treat the ADDR and LEN
+separately, because it is possible for an implementation to only
+need the address in order to perform the unmap operation.
+
+			Platform Issues
+
+If you are just writing drivers for Linux and do not maintain
+an architecture port for the kernel, you can safely skip down
+to "Closing".
+
+1) Struct scatterlist requirements.
+
+   Don't invent the architecture specific struct scatterlist; just use
+   <asm-generic/scatterlist.h>. You need to enable
+   CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
+   (including software IOMMU).
+
+2) ARCH_DMA_MINALIGN
+
+   Architectures must ensure that kmalloc'ed buffer is
+   DMA-safe. Drivers and subsystems depend on it. If an architecture
+   isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
+   the CPU cache is identical to data in main memory),
+   ARCH_DMA_MINALIGN must be set so that the memory allocator
+   makes sure that kmalloc'ed buffer doesn't share a cache line with
+   the others. See arch/arm/include/asm/cache.h as an example.
+
+   Note that ARCH_DMA_MINALIGN is about DMA memory alignment
+   constraints. You don't need to worry about the architecture data
+   alignment constraints (e.g. the alignment constraints about 64-bit
+   objects).
+
+3) Supporting multiple types of IOMMUs
+
+   If your architecture needs to support multiple types of IOMMUs, you
+   can use include/linux/asm-generic/dma-mapping-common.h. It's a
+   library to support the DMA API with multiple types of IOMMUs. Lots
+   of architectures (x86, powerpc, sh, alpha, ia64, microblaze and
+   sparc) use it. Choose one to see how it can be used. If you need to
+   support multiple types of IOMMUs in a single system, the example of
+   x86 or powerpc helps.
+
+			   Closing
+
+This document, and the API itself, would not be in its current
+form without the feedback and suggestions from numerous individuals.
+We would like to specifically mention, in no particular order, the
+following people:
+
+	Russell King <rmk@arm.linux.org.uk>
+	Leo Dagum <dagum@barrel.engr.sgi.com>
+	Ralf Baechle <ralf@oss.sgi.com>
+	Grant Grundler <grundler@cup.hp.com>
+	Jay Estabrook <Jay.Estabrook@compaq.com>
+	Thomas Sailer <sailer@ife.ee.ethz.ch>
+	Andrea Arcangeli <andrea@suse.de>
+	Jens Axboe <jens.axboe@oracle.com>
+	David Mosberger-Tang <davidm@hpl.hp.com>

linux-imx/Documentation/DMA-API.txt

diff --git a/linux-imx/Documentation/DMA-API.txt b/linux-imx/Documentation/DMA-API.txt
new file mode 100644
index 0000000..78a6c56
--- /dev/null
+++ b/linux-imx/Documentation/DMA-API.txt
@@ -0,0 +1,692 @@
+               Dynamic DMA mapping using the generic device
+               ============================================
+
+        James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
+
+This document describes the DMA API.  For a more gentle introduction
+of the API (and actual examples) see
+Documentation/DMA-API-HOWTO.txt.
+
+This API is split into two pieces.  Part I describes the API.  Part II
+describes the extensions to the API for supporting non-consistent
+memory machines.  Unless you know that your driver absolutely has to
+support non-consistent platforms (this is usually only legacy
+platforms) you should only use the API described in part I.
+
+Part I - dma_ API
+-------------------------------------
+
+To get the dma_ API, you must #include <linux/dma-mapping.h>
+
+
+Part Ia - Using large dma-coherent buffers
+------------------------------------------
+
+void *
+dma_alloc_coherent(struct device *dev, size_t size,
+			     dma_addr_t *dma_handle, gfp_t flag)
+
+Consistent memory is memory for which a write by either the device or
+the processor can immediately be read by the processor or device
+without having to worry about caching effects.  (You may however need
+to make sure to flush the processor's write buffers before telling
+devices to read that memory.)
+
+This routine allocates a region of <size> bytes of consistent memory.
+It also returns a <dma_handle> which may be cast to an unsigned
+integer the same width as the bus and used as the physical address
+base of the region.
+
+Returns: a pointer to the allocated region (in the processor's virtual
+address space) or NULL if the allocation failed.
+
+Note: consistent memory can be expensive on some platforms, and the
+minimum allocation length may be as big as a page, so you should
+consolidate your requests for consistent memory as much as possible.
+The simplest way to do that is to use the dma_pool calls (see below).
+
+The flag parameter (dma_alloc_coherent only) allows the caller to
+specify the GFP_ flags (see kmalloc) for the allocation (the
+implementation may choose to ignore flags that affect the location of
+the returned memory, like GFP_DMA).
+
+void *
+dma_zalloc_coherent(struct device *dev, size_t size,
+			     dma_addr_t *dma_handle, gfp_t flag)
+
+Wraps dma_alloc_coherent() and also zeroes the returned memory if the
+allocation attempt succeeded.
+
+void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+			   dma_addr_t dma_handle)
+
+Free the region of consistent memory you previously allocated.  dev,
+size and dma_handle must all be the same as those passed into the
+consistent allocate.  cpu_addr must be the virtual address returned by
+the consistent allocate.
+
+Note that unlike their sibling allocation calls, these routines
+may only be called with IRQs enabled.
+
+
+Part Ib - Using small dma-coherent buffers
+------------------------------------------
+
+To get this part of the dma_ API, you must #include <linux/dmapool.h>
+
+Many drivers need lots of small dma-coherent memory regions for DMA
+descriptors or I/O buffers.  Rather than allocating in units of a page
+or more using dma_alloc_coherent(), you can use DMA pools.  These work
+much like a struct kmem_cache, except that they use the dma-coherent allocator,
+not __get_free_pages().  Also, they understand common hardware constraints
+for alignment, like queue heads needing to be aligned on N-byte boundaries.
+
+
+	struct dma_pool *
+	dma_pool_create(const char *name, struct device *dev,
+			size_t size, size_t align, size_t alloc);
+
+The pool create() routines initialize a pool of dma-coherent buffers
+for use with a given device.  It must be called in a context which
+can sleep.
+
+The "name" is for diagnostics (like a struct kmem_cache name); dev and size
+are like what you'd pass to dma_alloc_coherent().  The device's hardware
+alignment requirement for this type of data is "align" (which is expressed
+in bytes, and must be a power of two).  If your device has no boundary
+crossing restrictions, pass 0 for alloc; passing 4096 says memory allocated
+from this pool must not cross 4KByte boundaries.
+
+
+	void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
+			dma_addr_t *dma_handle);
+
+This allocates memory from the pool; the returned memory will meet the size
+and alignment requirements specified at creation time.  Pass GFP_ATOMIC to
+prevent blocking, or if it's permitted (not in_interrupt, not holding SMP locks),
+pass GFP_KERNEL to allow blocking.  Like dma_alloc_coherent(), this returns
+two values:  an address usable by the cpu, and the dma address usable by the
+pool's device.
+
+
+	void dma_pool_free(struct dma_pool *pool, void *vaddr,
+			dma_addr_t addr);
+
+This puts memory back into the pool.  The pool is what was passed to
+the pool allocation routine; the cpu (vaddr) and dma addresses are what
+were returned when that routine allocated the memory being freed.
+
+
+	void dma_pool_destroy(struct dma_pool *pool);
+
+The pool destroy() routines free the resources of the pool.  They must be
+called in a context which can sleep.  Make sure you've freed all allocated
+memory back to the pool before you destroy it.
+
+
+Part Ic - DMA addressing limitations
+------------------------------------
+
+int
+dma_supported(struct device *dev, u64 mask)
+
+Checks to see if the device can support DMA to the memory described by
+mask.
+
+Returns: 1 if it can and 0 if it can't.
+
+Notes: This routine merely tests to see if the mask is possible.  It
+won't change the current mask settings.  It is more intended as an
+internal API for use by the platform than an external API for use by
+driver writers.
+
+int
+dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+int
+dma_set_coherent_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+u64
+dma_get_required_mask(struct device *dev)
+
+This API returns the mask that the platform requires to
+operate efficiently.  Usually this means the returned mask
+is the minimum required to cover all of memory.  Examining the
+required mask gives drivers with variable descriptor sizes the
+opportunity to use smaller descriptors as necessary.
+
+Requesting the required mask does not alter the current mask.  If you
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
+
+
+Part Id - Streaming DMA mappings
+--------------------------------
+
+dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+		      enum dma_data_direction direction)
+
+Maps a piece of processor virtual memory so it can be accessed by the
+device and returns the physical handle of the memory.
+
+The direction for both api's may be converted freely by casting.
+However the dma_ API uses a strongly typed enumerator for its
+direction:
+
+DMA_NONE		no direction (used for debugging)
+DMA_TO_DEVICE		data is going from the memory to the device
+DMA_FROM_DEVICE		data is coming from the device to the memory
+DMA_BIDIRECTIONAL	direction isn't known
+
+Notes:  Not all memory regions in a machine can be mapped by this
+API.  Further, regions that appear to be physically contiguous in
+kernel virtual space may not be contiguous as physical memory.  Since
+this API does not provide any scatter/gather capability, it will fail
+if the user tries to map a non-physically contiguous piece of memory.
+For this reason, it is recommended that memory mapped by this API be
+obtained only from sources which guarantee it to be physically contiguous
+(like kmalloc).
+
+Further, the physical address of the memory must be within the
+dma_mask of the device (the dma_mask represents a bit mask of the
+addressable region for the device.  I.e., if the physical address of
+the memory anded with the dma_mask is still equal to the physical
+address, then the device can perform DMA to the memory).  In order to
+ensure that the memory allocated by kmalloc is within the dma_mask,
+the driver may specify various platform-dependent flags to restrict
+the physical memory range of the allocation (e.g. on x86, GFP_DMA
+guarantees to be within the first 16Mb of available physical memory,
+as required by ISA devices).
+
+Note also that the above constraints on physical contiguity and
+dma_mask may not apply if the platform has an IOMMU (a device which
+supplies a physical to virtual mapping between the I/O memory bus and
+the device).  However, to be portable, device driver writers may *not*
+assume that such an IOMMU exists.
+
+Warnings:  Memory coherency operates at a granularity called the cache
+line width.  In order for memory mapped by this API to operate
+correctly, the mapped region must begin exactly on a cache line
+boundary and end exactly on one (to prevent two separately mapped
+regions from sharing a single cache line).  Since the cache line size
+may not be known at compile time, the API will not enforce this
+requirement.  Therefore, it is recommended that driver writers who
+don't take special care to determine the cache line size at run time
+only map virtual regions that begin and end on page boundaries (which
+are guaranteed also to be cache line boundaries).
+
+DMA_TO_DEVICE synchronisation must be done after the last modification
+of the memory region by the software and before it is handed off to
+the driver.  Once this primitive is used, memory covered by this
+primitive should be treated as read-only by the device.  If the device
+may write to it at any point, it should be DMA_BIDIRECTIONAL (see
+below).
+
+DMA_FROM_DEVICE synchronisation must be done before the driver
+accesses data that may be changed by the device.  This memory should
+be treated as read-only by the driver.  If the driver needs to write
+to it at any point, it should be DMA_BIDIRECTIONAL (see below).
+
+DMA_BIDIRECTIONAL requires special handling: it means that the driver
+isn't sure if the memory was modified before being handed off to the
+device and also isn't sure if the device will also modify it.  Thus,
+you must always sync bidirectional memory twice: once before the
+memory is handed off to the device (to make sure all memory changes
+are flushed from the processor) and once before the data may be
+accessed after being used by the device (to make sure any processor
+cache lines are updated with data that the device may have changed).
+
+void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+
+Unmaps the region previously mapped.  All the parameters passed in
+must be identical to those passed in (and returned) by the mapping
+API.
+
+dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+		    unsigned long offset, size_t size,
+		    enum dma_data_direction direction)
+void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+
+API for mapping and unmapping for pages.  All the notes and warnings
+for the other mapping APIs apply here.  Also, although the <offset>
+and <size> parameters are provided to do partial page mapping, it is
+recommended that you never use these unless you really know what the
+cache width is.
+
+int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+
+In some circumstances dma_map_single and dma_map_page will fail to create
+a mapping. A driver can check for these errors by testing the returned
+dma address with dma_mapping_error(). A non-zero return value means the mapping
+could not be created and the driver should take appropriate action (e.g.
+reduce current DMA mapping usage or delay and try again later).
+
+	int
+	dma_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction direction)
+
+Returns: the number of physical segments mapped (this may be shorter
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
+
+Please note that the sg cannot be mapped again if it has been mapped once.
+The mapping process is allowed to destroy information in the sg.
+
+As with the other mapping interfaces, dma_map_sg can fail. When it
+does, 0 is returned and a driver must take appropriate action. It is
+critical that the driver do something, in the case of a block driver
+aborting the request or even oopsing is better than doing nothing and
+corrupting the filesystem.
+
+With scatterlists, you use the resulting mapping like this:
+
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, count, i) {
+		hw_address[i] = sg_dma_address(sg);
+		hw_len[i] = sg_dma_len(sg);
+	}
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. with an IOMMU, or if several pages just happen to be
+physically contiguous) and returns the actual number of sg entries it
+mapped them to. On failure 0, is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+	void
+	dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nhwentries, enum dma_data_direction direction)
+
+Unmap the previously mapped scatter/gather list.  All the parameters
+must be the same as those and passed in to the scatter/gather mapping
+API.
+
+Note: <nents> must be the number you passed in, *not* the number of
+physical entries returned.
+
+void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+
+Synchronise a single contiguous or scatter/gather mapping for the cpu
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
+
+Notes:  You must do this:
+
+- Before reading values that have been written by DMA from the device
+  (use the DMA_FROM_DEVICE direction)
+- After writing values that will be written to the device using DMA
+  (use the DMA_TO_DEVICE) direction
+- before *and* after handing memory to the device if the memory is
+  DMA_BIDIRECTIONAL
+
+See also dma_map_single().
+
+dma_addr_t
+dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
+		     enum dma_data_direction dir,
+		     struct dma_attrs *attrs)
+
+void
+dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
+		       size_t size, enum dma_data_direction dir,
+		       struct dma_attrs *attrs)
+
+int
+dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
+		 int nents, enum dma_data_direction dir,
+		 struct dma_attrs *attrs)
+
+void
+dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
+		   int nents, enum dma_data_direction dir,
+		   struct dma_attrs *attrs)
+
+The four functions above are just like the counterpart functions
+without the _attrs suffixes, except that they pass an optional
+struct dma_attrs*.
+
+struct dma_attrs encapsulates a set of "dma attributes". For the
+definition of struct dma_attrs see linux/dma-attrs.h.
+
+The interpretation of dma attributes is architecture-specific, and
+each attribute should be documented in Documentation/DMA-attributes.txt.
+
+If struct dma_attrs* is NULL, the semantics of each of these
+functions is identical to those of the corresponding function
+without the _attrs suffix. As a result dma_map_single_attrs()
+can generally replace dma_map_single(), etc.
+
+As an example of the use of the *_attrs functions, here's how
+you could pass an attribute DMA_ATTR_FOO when mapping memory
+for DMA:
+
+#include <linux/dma-attrs.h>
+/* DMA_ATTR_FOO should be defined in linux/dma-attrs.h and
+ * documented in Documentation/DMA-attributes.txt */
+...
+
+	DEFINE_DMA_ATTRS(attrs);
+	dma_set_attr(DMA_ATTR_FOO, &attrs);
+	....
+	n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, &attr);
+	....
+
+Architectures that care about DMA_ATTR_FOO would check for its
+presence in their implementations of the mapping and unmapping
+routines, e.g.:
+
+void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
+			     size_t size, enum dma_data_direction dir,
+			     struct dma_attrs *attrs)
+{
+	....
+	int foo =  dma_get_attr(DMA_ATTR_FOO, attrs);
+	....
+	if (foo)
+		/* twizzle the frobnozzle */
+	....
+
+
+Part II - Advanced dma_ usage
+-----------------------------
+
+Warning: These pieces of the DMA API should not be used in the
+majority of cases, since they cater for unlikely corner cases that
+don't belong in usual drivers.
+
+If you don't understand how cache line coherency works between a
+processor and an I/O device, you should not be using this part of the
+API at all.
+
+void *
+dma_alloc_noncoherent(struct device *dev, size_t size,
+			       dma_addr_t *dma_handle, gfp_t flag)
+
+Identical to dma_alloc_coherent() except that the platform will
+choose to return either consistent or non-consistent memory as it sees
+fit.  By using this API, you are guaranteeing to the platform that you
+have all the correct and necessary sync points for this memory in the
+driver should it choose to return non-consistent memory.
+
+Note: where the platform can return consistent memory, it will
+guarantee that the sync points become nops.
+
+Warning:  Handling non-consistent memory is a real pain.  You should
+only ever use this API if you positively know your driver will be
+required to work on one of the rare (usually non-PCI) architectures
+that simply cannot make consistent memory.
+
+void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+			      dma_addr_t dma_handle)
+
+Free memory allocated by the nonconsistent API.  All parameters must
+be identical to those passed in (and returned by
+dma_alloc_noncoherent()).
+
+int
+dma_get_cache_alignment(void)
+
+Returns the processor cache alignment.  This is the absolute minimum
+alignment *and* width that you must observe when either mapping
+memory or doing partial flushes.
+
+Notes: This API may return a number *larger* than the actual cache
+line, but it will guarantee that one or more cache lines fit exactly
+into the width returned by this call.  It will also always be a power
+of two for easy alignment.
+
+void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction)
+
+Do a partial sync of memory that was allocated by
+dma_alloc_noncoherent(), starting at virtual address vaddr and
+continuing on for size.  Again, you *must* observe the cache line
+boundaries when doing this.
+
+int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int
+			    flags)
+
+Declare region of memory to be handed out by dma_alloc_coherent when
+it's asked for coherent memory for this device.
+
+bus_addr is the physical address to which the memory is currently
+assigned in the bus responding region (this will be used by the
+platform to perform the mapping).
+
+device_addr is the physical address the device needs to be programmed
+with actually to address this memory (this will be handed out as the
+dma_addr_t in dma_alloc_coherent()).
+
+size is the size of the area (must be multiples of PAGE_SIZE).
+
+flags can be or'd together and are:
+
+DMA_MEMORY_MAP - request that the memory returned from
+dma_alloc_coherent() be directly writable.
+
+DMA_MEMORY_IO - request that the memory returned from
+dma_alloc_coherent() be addressable using read/write/memcpy_toio etc.
+
+One or both of these flags must be present.
+
+DMA_MEMORY_INCLUDES_CHILDREN - make the declared memory be allocated by
+dma_alloc_coherent of any child devices of this one (for memory residing
+on a bridge).
+
+DMA_MEMORY_EXCLUSIVE - only allocate memory from the declared regions. 
+Do not allow dma_alloc_coherent() to fall back to system memory when
+it's out of memory in the declared region.
+
+The return value will be either DMA_MEMORY_MAP or DMA_MEMORY_IO and
+must correspond to a passed in flag (i.e. no returning DMA_MEMORY_IO
+if only DMA_MEMORY_MAP were passed in) for success or zero for
+failure.
+
+Note, for DMA_MEMORY_IO returns, all subsequent memory returned by
+dma_alloc_coherent() may no longer be accessed directly, but instead
+must be accessed using the correct bus functions.  If your driver
+isn't prepared to handle this contingency, it should not specify
+DMA_MEMORY_IO in the input flags.
+
+As a simplification for the platforms, only *one* such region of
+memory may be declared per device.
+
+For reasons of efficiency, most platforms choose to track the declared
+region only at the granularity of a page.  For smaller allocations,
+you should use the dma_pool() API.
+
+void
+dma_release_declared_memory(struct device *dev)
+
+Remove the memory region previously declared from the system.  This
+API performs *no* in-use checking for this region and will return
+unconditionally having removed all the required structures.  It is the
+driver's job to ensure that no parts of this memory region are
+currently in use.
+
+void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size)
+
+This is used to occupy specific regions of the declared space
+(dma_alloc_coherent() will hand out the first free region it finds).
+
+device_addr is the *device* address of the region requested.
+
+size is the size (and should be a page-sized multiple).
+
+The return value will be either a pointer to the processor virtual
+address of the memory, or an error (via PTR_ERR()) if any part of the
+region is occupied.
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above as some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this:
+
+------------[ cut here ]------------
+WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+	check_unmap+0x203/0x490()
+Hardware name:
+forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+	function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+single] [unmapped as page]
+Modules linked in: nfsd exportfs bridge stp llc r8169
+Pid: 0, comm: swapper Tainted: G        W  2.6.28-dmatest-09289-g8bb99c0 #1
+Call Trace:
+ <IRQ>  [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+	dma-api/all_errors	This file contains a numeric value. If this
+				value is not equal to zero the debugging code
+				will print a warning for every error it finds
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
+
+	dma-api/disabled	This read-only file contains the character 'Y'
+				if the debugging code is disabled. This can
+				happen when it runs out of memory or if it was
+				disabled at boot time
+
+	dma-api/error_count	This file is read-only and shows the total
+				numbers of errors found.
+
+	dma-api/num_errors	The number in this file shows how many
+				warnings will be printed to the kernel log
+				before it stops. This number is initialized to
+				one at system boot and be set by writing into
+				this file
+
+	dma-api/min_free_entries
+				This read-only file can be read to get the
+				minimum number of free dma_debug_entries the
+				allocator has ever seen. If this value goes
+				down to zero the code will disable itself
+				because it is not longer reliable.
+
+	dma-api/num_free_entries
+				The current number of free dma_debug_entries
+				in the allocator.
+
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries. These entries are preallocated at boot. The number
+of preallocated entries is defined per architecture. If it is too low for you
+boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
+architectural default.
+
+void debug_dmap_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+dma-debug interface debug_dma_mapping_error() to debug drivers that fail
+to check dma mapping errors on addresses returned by dma_map_single() and
+dma_map_page() interfaces. This interface clears a flag set by
+debug_dma_map_page() to indicate that dma_mapping_error() has been called by
+the driver. When driver does unmap, debug_dma_unmap() checks the flag and if
+this flag is still set, prints warning message that includes call trace that
+leads up to the unmap. This interface can be called from dma_mapping_error()
+routines to enable dma mapping error check debugging.
+

linux-imx/Documentation/DMA-ISA-LPC.txt

diff --git a/linux-imx/Documentation/DMA-ISA-LPC.txt b/linux-imx/Documentation/DMA-ISA-LPC.txt
new file mode 100644
index 0000000..e767805
--- /dev/null
+++ b/linux-imx/Documentation/DMA-ISA-LPC.txt
@@ -0,0 +1,151 @@
+                        DMA with ISA and LPC devices
+                        ============================
+
+                      Pierre Ossman <drzeus@drzeus.cx>
+
+This document describes how to do DMA transfers using the old ISA DMA
+controller. Even though ISA is more or less dead today the LPC bus
+uses the same DMA system so it will be around for quite some time.
+
+Part I - Headers and dependencies
+---------------------------------
+
+To do ISA style DMA you need to include two headers:
+
+#include <linux/dma-mapping.h>
+#include <asm/dma.h>
+
+The first is the generic DMA API used to convert virtual addresses to
+physical addresses (see Documentation/DMA-API.txt for details).
+
+The second contains the routines specific to ISA DMA transfers. Since
+this is not present on all platforms make sure you construct your
+Kconfig to be dependent on ISA_DMA_API (not ISA) so that nobody tries
+to build your driver on unsupported platforms.
+
+Part II - Buffer allocation
+---------------------------
+
+The ISA DMA controller has some very strict requirements on which
+memory it can access so extra care must be taken when allocating
+buffers.
+
+(You usually need a special buffer for DMA transfers instead of
+transferring directly to and from your normal data structures.)
+
+The DMA-able address space is the lowest 16 MB of _physical_ memory.
+Also the transfer block may not cross page boundaries (which are 64
+or 128 KiB depending on which channel you use).
+
+In order to allocate a piece of memory that satisfies all these
+requirements you pass the flag GFP_DMA to kmalloc.
+
+Unfortunately the memory available for ISA DMA is scarce so unless you
+allocate the memory during boot-up it's a good idea to also pass
+__GFP_REPEAT and __GFP_NOWARN to make the allocater try a bit harder.
+
+(This scarcity also means that you should allocate the buffer as
+early as possible and not release it until the driver is unloaded.)
+
+Part III - Address translation
+------------------------------
+
+To translate the virtual address to a physical use the normal DMA
+API. Do _not_ use isa_virt_to_phys() even though it does the same
+thing. The reason for this is that the function isa_virt_to_phys()
+will require a Kconfig dependency to ISA, not just ISA_DMA_API which
+is really all you need. Remember that even though the DMA controller
+has its origins in ISA it is used elsewhere.
+
+Note: x86_64 had a broken DMA API when it came to ISA but has since
+been fixed. If your arch has problems then fix the DMA API instead of
+reverting to the ISA functions.
+
+Part IV - Channels
+------------------
+
+A normal ISA DMA controller has 8 channels. The lower four are for
+8-bit transfers and the upper four are for 16-bit transfers.
+
+(Actually the DMA controller is really two separate controllers where
+channel 4 is used to give DMA access for the second controller (0-3).
+This means that of the four 16-bits channels only three are usable.)
+
+You allocate these in a similar fashion as all basic resources:
+
+extern int request_dma(unsigned int dmanr, const char * device_id);
+extern void free_dma(unsigned int dmanr);
+
+The ability to use 16-bit or 8-bit transfers is _not_ up to you as a
+driver author but depends on what the hardware supports. Check your
+specs or test different channels.
+
+Part V - Transfer data
+----------------------
+
+Now for the good stuff, the actual DMA transfer. :)
+
+Before you use any ISA DMA routines you need to claim the DMA lock
+using claim_dma_lock(). The reason is that some DMA operations are
+not atomic so only one driver may fiddle with the registers at a
+time.
+
+The first time you use the DMA controller you should call
+clear_dma_ff(). This clears an internal register in the DMA
+controller that is used for the non-atomic operations. As long as you
+(and everyone else) uses the locking functions then you only need to
+reset this once.
+
+Next, you tell the controller in which direction you intend to do the
+transfer using set_dma_mode(). Currently you have the options
+DMA_MODE_READ and DMA_MODE_WRITE.
+
+Set the address from where the transfer should start (this needs to
+be 16-bit aligned for 16-bit transfers) and how many bytes to
+transfer. Note that it's _bytes_. The DMA routines will do all the
+required translation to values that the DMA controller understands.
+
+The final step is enabling the DMA channel and releasing the DMA
+lock.
+
+Once the DMA transfer is finished (or timed out) you should disable
+the channel again. You should also check get_dma_residue() to make
+sure that all data has been transferred.
+
+Example:
+
+int flags, residue;
+
+flags = claim_dma_lock();
+
+clear_dma_ff();
+
+set_dma_mode(channel, DMA_MODE_WRITE);
+set_dma_addr(channel, phys_addr);
+set_dma_count(channel, num_bytes);
+
+dma_enable(channel);
+
+release_dma_lock(flags);
+
+while (!device_done());
+
+flags = claim_dma_lock();
+
+dma_disable(channel);
+
+residue = dma_get_residue(channel);
+if (residue != 0)
+	printk(KERN_ERR "driver: Incomplete DMA transfer!"
+		" %d bytes left!\n", residue);
+
+release_dma_lock(flags);
+
+Part VI - Suspend/resume
+------------------------
+
+It is the driver's responsibility to make sure that the machine isn't
+suspended while a DMA transfer is in progress. Also, all DMA settings
+are lost when the system suspends so if your driver relies on the DMA
+controller being in a certain state then you have to restore these
+registers upon resume.

linux-imx/Documentation/DMA-attributes.txt

diff --git a/linux-imx/Documentation/DMA-attributes.txt b/linux-imx/Documentation/DMA-attributes.txt
new file mode 100644
index 0000000..e59480d
--- /dev/null
+++ b/linux-imx/Documentation/DMA-attributes.txt
@@ -0,0 +1,102 @@
+			DMA attributes
+			==============
+
+This document describes the semantics of the DMA attributes that are
+defined in linux/dma-attrs.h.
+
+DMA_ATTR_WRITE_BARRIER
+----------------------
+
+DMA_ATTR_WRITE_BARRIER is a (write) barrier attribute for DMA.  DMA
+to a memory region with the DMA_ATTR_WRITE_BARRIER attribute forces
+all pending DMA writes to complete, and thus provides a mechanism to
+strictly order DMA from a device across all intervening busses and
+bridges.  This barrier is not specific to a particular type of
+interconnect, it applies to the system as a whole, and so its
+implementation must account for the idiosyncracies of the system all
+the way from the DMA device to memory.
+
+As an example of a situation where DMA_ATTR_WRITE_BARRIER would be
+useful, suppose that a device does a DMA write to indicate that data is
+ready and available in memory.  The DMA of the "completion indication"
+could race with data DMA.  Mapping the memory used for completion
+indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
+
+DMA_ATTR_WEAK_ORDERING
+----------------------
+
+DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
+may be weakly ordered, that is that reads and writes may pass each other.
+
+Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_WRITE_COMBINE
+----------------------
+
+DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be
+buffered to improve performance.
+
+Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_NON_CONSISTENT
+-----------------------
+
+DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
+consistent or non-consistent memory as it sees fit.  By using this API,
+you are guaranteeing to the platform that you have all the correct and
+necessary sync points for this memory in the driver.
+
+DMA_ATTR_NO_KERNEL_MAPPING
+--------------------------
+
+DMA_ATTR_NO_KERNEL_MAPPING lets the platform to avoid creating a kernel
+virtual mapping for the allocated buffer. On some architectures creating
+such mapping is non-trivial task and consumes very limited resources
+(like kernel virtual address space or dma consistent address space).
+Buffers allocated with this attribute can be only passed to user space
+by calling dma_mmap_attrs(). By using this API, you are guaranteeing
+that you won't dereference the pointer returned by dma_alloc_attr(). You
+can threat it as a cookie that must be passed to dma_mmap_attrs() and
+dma_free_attrs(). Make sure that both of these also get this attribute
+set on each call.
+
+Since it is optional for platforms to implement
+DMA_ATTR_NO_KERNEL_MAPPING, those that do not will simply ignore the
+attribute and exhibit default behavior.
+
+DMA_ATTR_SKIP_CPU_SYNC
+----------------------
+
+By default dma_map_{single,page,sg} functions family transfer a given
+buffer from CPU domain to device domain. Some advanced use cases might
+require sharing a buffer between more than one device. This requires
+having a mapping created separately for each device and is usually
+performed by calling dma_map_{single,page,sg} function more than once
+for the given buffer with device pointer to each device taking part in
+the buffer sharing. The first call transfers a buffer from 'CPU' domain
+to 'device' domain, what synchronizes CPU caches for the given region
+(usually it means that the cache has been flushed or invalidated
+depending on the dma direction). However, next calls to
+dma_map_{single,page,sg}() for other devices will perform exactly the
+same sychronization operation on the CPU cache. CPU cache sychronization
+might be a time consuming operation, especially if the buffers are
+large, so it is highly recommended to avoid it if possible.
+DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of
+the CPU cache for the given buffer assuming that it has been already
+transferred to 'device' domain. This attribute can be also used for
+dma_unmap_{single,page,sg} functions family to force buffer to stay in
+device domain after releasing a mapping for it. Use this attribute with
+care!
+
+DMA_ATTR_FORCE_CONTIGUOUS
+-------------------------
+
+By default DMA-mapping subsystem is allowed to assemble the buffer
+allocated by dma_alloc_attrs() function from individual pages if it can
+be mapped as contiguous chunk into device dma address space. By
+specifing this attribute the allocated buffer is forced to be contiguous
+also in physical memory.

linux-imx/Documentation/DocBook/80211.tmpl

diff --git a/linux-imx/Documentation/DocBook/80211.tmpl b/linux-imx/Documentation/DocBook/80211.tmpl
new file mode 100644
index 0000000..0f6a3ed
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/80211.tmpl
@@ -0,0 +1,582 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+<set>
+  <setinfo>
+    <title>The 802.11 subsystems &ndash; for kernel developers</title>
+    <subtitle>
+      Explaining wireless 802.11 networking in the Linux kernel
+    </subtitle>
+
+    <copyright>
+      <year>2007-2009</year>
+      <holder>Johannes Berg</holder>
+    </copyright>
+
+    <authorgroup>
+      <author>
+        <firstname>Johannes</firstname>
+        <surname>Berg</surname>
+        <affiliation>
+          <address><email>johannes@sipsolutions.net</email></address>
+        </affiliation>
+      </author>
+    </authorgroup>
+
+    <legalnotice>
+      <para>
+        This documentation is free software; you can redistribute
+        it and/or modify it under the terms of the GNU General Public
+        License version 2 as published by the Free Software Foundation.
+      </para>
+      <para>
+        This documentation is distributed in the hope that it will be
+        useful, but WITHOUT ANY WARRANTY; without even the implied
+        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+        See the GNU General Public License for more details.
+      </para>
+      <para>
+        You should have received a copy of the GNU General Public
+        License along with this documentation; if not, write to the Free
+        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+        MA 02111-1307 USA
+      </para>
+      <para>
+        For more details see the file COPYING in the source
+        distribution of Linux.
+      </para>
+    </legalnotice>
+
+    <abstract>
+      <para>
+        These books attempt to give a description of the
+        various subsystems that play a role in 802.11 wireless
+        networking in Linux. Since these books are for kernel
+        developers they attempts to document the structures
+        and functions used in the kernel as well as giving a
+        higher-level overview.
+      </para>
+      <para>
+	The reader is expected to be familiar with the 802.11
+	standard as published by the IEEE in 802.11-2007 (or
+	possibly later versions). References to this standard
+	will be given as "802.11-2007 8.1.5".
+      </para>
+    </abstract>
+  </setinfo>
+  <book id="cfg80211-developers-guide">
+    <bookinfo>
+      <title>The cfg80211 subsystem</title>
+
+      <abstract>
+!Pinclude/net/cfg80211.h Introduction
+      </abstract>
+    </bookinfo>
+      <chapter>
+      <title>Device registration</title>
+!Pinclude/net/cfg80211.h Device registration
+!Finclude/net/cfg80211.h ieee80211_band
+!Finclude/net/cfg80211.h ieee80211_channel_flags
+!Finclude/net/cfg80211.h ieee80211_channel
+!Finclude/net/cfg80211.h ieee80211_rate_flags
+!Finclude/net/cfg80211.h ieee80211_rate
+!Finclude/net/cfg80211.h ieee80211_sta_ht_cap
+!Finclude/net/cfg80211.h ieee80211_supported_band
+!Finclude/net/cfg80211.h cfg80211_signal_type
+!Finclude/net/cfg80211.h wiphy_params_flags
+!Finclude/net/cfg80211.h wiphy_flags
+!Finclude/net/cfg80211.h wiphy
+!Finclude/net/cfg80211.h wireless_dev
+!Finclude/net/cfg80211.h wiphy_new
+!Finclude/net/cfg80211.h wiphy_register
+!Finclude/net/cfg80211.h wiphy_unregister
+!Finclude/net/cfg80211.h wiphy_free
+
+!Finclude/net/cfg80211.h wiphy_name
+!Finclude/net/cfg80211.h wiphy_dev
+!Finclude/net/cfg80211.h wiphy_priv
+!Finclude/net/cfg80211.h priv_to_wiphy
+!Finclude/net/cfg80211.h set_wiphy_dev
+!Finclude/net/cfg80211.h wdev_priv
+      </chapter>
+      <chapter>
+      <title>Actions and configuration</title>
+!Pinclude/net/cfg80211.h Actions and configuration
+!Finclude/net/cfg80211.h cfg80211_ops
+!Finclude/net/cfg80211.h vif_params
+!Finclude/net/cfg80211.h key_params
+!Finclude/net/cfg80211.h survey_info_flags
+!Finclude/net/cfg80211.h survey_info
+!Finclude/net/cfg80211.h cfg80211_beacon_data
+!Finclude/net/cfg80211.h cfg80211_ap_settings
+!Finclude/net/cfg80211.h station_parameters
+!Finclude/net/cfg80211.h station_info_flags
+!Finclude/net/cfg80211.h rate_info_flags
+!Finclude/net/cfg80211.h rate_info
+!Finclude/net/cfg80211.h station_info
+!Finclude/net/cfg80211.h monitor_flags
+!Finclude/net/cfg80211.h mpath_info_flags
+!Finclude/net/cfg80211.h mpath_info
+!Finclude/net/cfg80211.h bss_parameters
+!Finclude/net/cfg80211.h ieee80211_txq_params
+!Finclude/net/cfg80211.h cfg80211_crypto_settings
+!Finclude/net/cfg80211.h cfg80211_auth_request
+!Finclude/net/cfg80211.h cfg80211_assoc_request
+!Finclude/net/cfg80211.h cfg80211_deauth_request
+!Finclude/net/cfg80211.h cfg80211_disassoc_request
+!Finclude/net/cfg80211.h cfg80211_ibss_params
+!Finclude/net/cfg80211.h cfg80211_connect_params
+!Finclude/net/cfg80211.h cfg80211_pmksa
+!Finclude/net/cfg80211.h cfg80211_send_rx_auth
+!Finclude/net/cfg80211.h cfg80211_send_auth_timeout
+!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
+!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
+!Finclude/net/cfg80211.h cfg80211_send_deauth
+!Finclude/net/cfg80211.h __cfg80211_send_deauth
+!Finclude/net/cfg80211.h cfg80211_send_disassoc
+!Finclude/net/cfg80211.h __cfg80211_send_disassoc
+!Finclude/net/cfg80211.h cfg80211_ibss_joined
+!Finclude/net/cfg80211.h cfg80211_connect_result
+!Finclude/net/cfg80211.h cfg80211_roamed
+!Finclude/net/cfg80211.h cfg80211_disconnected
+!Finclude/net/cfg80211.h cfg80211_ready_on_channel
+!Finclude/net/cfg80211.h cfg80211_remain_on_channel_expired
+!Finclude/net/cfg80211.h cfg80211_new_sta
+!Finclude/net/cfg80211.h cfg80211_rx_mgmt
+!Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
+!Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_cqm_pktloss_notify
+!Finclude/net/cfg80211.h cfg80211_michael_mic_failure
+      </chapter>
+      <chapter>
+      <title>Scanning and BSS list handling</title>
+!Pinclude/net/cfg80211.h Scanning and BSS list handling
+!Finclude/net/cfg80211.h cfg80211_ssid
+!Finclude/net/cfg80211.h cfg80211_scan_request
+!Finclude/net/cfg80211.h cfg80211_scan_done
+!Finclude/net/cfg80211.h cfg80211_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
+!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_unlink_bss
+!Finclude/net/cfg80211.h cfg80211_find_ie
+!Finclude/net/cfg80211.h ieee80211_bss_get_ie
+      </chapter>
+      <chapter>
+      <title>Utility functions</title>
+!Pinclude/net/cfg80211.h Utility functions
+!Finclude/net/cfg80211.h ieee80211_channel_to_frequency
+!Finclude/net/cfg80211.h ieee80211_frequency_to_channel
+!Finclude/net/cfg80211.h ieee80211_get_channel
+!Finclude/net/cfg80211.h ieee80211_get_response_rate
+!Finclude/net/cfg80211.h ieee80211_hdrlen
+!Finclude/net/cfg80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/cfg80211.h ieee80211_radiotap_iterator
+      </chapter>
+      <chapter>
+      <title>Data path helpers</title>
+!Pinclude/net/cfg80211.h Data path helpers
+!Finclude/net/cfg80211.h ieee80211_data_to_8023
+!Finclude/net/cfg80211.h ieee80211_data_from_8023
+!Finclude/net/cfg80211.h ieee80211_amsdu_to_8023s
+!Finclude/net/cfg80211.h cfg80211_classify8021d
+      </chapter>
+      <chapter>
+      <title>Regulatory enforcement infrastructure</title>
+!Pinclude/net/cfg80211.h Regulatory enforcement infrastructure
+!Finclude/net/cfg80211.h regulatory_hint
+!Finclude/net/cfg80211.h wiphy_apply_custom_regulatory
+!Finclude/net/cfg80211.h freq_reg_info
+      </chapter>
+      <chapter>
+      <title>RFkill integration</title>
+!Pinclude/net/cfg80211.h RFkill integration
+!Finclude/net/cfg80211.h wiphy_rfkill_set_hw_state
+!Finclude/net/cfg80211.h wiphy_rfkill_start_polling
+!Finclude/net/cfg80211.h wiphy_rfkill_stop_polling
+      </chapter>
+      <chapter>
+      <title>Test mode</title>
+!Pinclude/net/cfg80211.h Test mode
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_reply_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_reply
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_event_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_event
+      </chapter>
+  </book>
+  <book id="mac80211-developers-guide">
+    <bookinfo>
+      <title>The mac80211 subsystem</title>
+      <abstract>
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+      </abstract>
+    </bookinfo>
+
+    <toc></toc>
+
+  <!--
+  Generally, this document shall be ordered by increasing complexity.
+  It is important to note that readers should be able to read only
+  the first few sections to get a working driver and only advanced
+  usage should require reading the full document.
+  -->
+
+    <part>
+      <title>The basic mac80211 driver interface</title>
+      <partintro>
+        <para>
+          You should read and understand the information contained
+          within this part of the book while implementing a driver.
+          In some chapters, advanced usage is noted, that may be
+          skipped at first.
+        </para>
+        <para>
+          This part of the book only covers station and monitor mode
+          functionality, additional information required to implement
+          the other modes is covered in the second part of the book.
+        </para>
+      </partintro>
+
+      <chapter id="basics">
+        <title>Basic hardware handling</title>
+        <para>TBD</para>
+        <para>
+          This chapter shall contain information on getting a hw
+          struct allocated and registered with mac80211.
+        </para>
+        <para>
+          Since it is required to allocate rates/modes before registering
+          a hw struct, this chapter shall also contain information on setting
+          up the rate/mode structs.
+        </para>
+        <para>
+          Additionally, some discussion about the callbacks and
+          the general programming model should be in here, including
+          the definition of ieee80211_ops which will be referred to
+          a lot.
+        </para>
+        <para>
+          Finally, a discussion of hardware capabilities should be done
+          with references to other parts of the book.
+        </para>
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+      </chapter>
+
+      <chapter id="phy-handling">
+        <title>PHY configuration</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe PHY handling including
+          start/stop callbacks and the various structures used.
+        </para>
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+      </chapter>
+
+      <chapter id="iface-handling">
+        <title>Virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe virtual interface basics
+          that are relevant to the driver (VLANs, MGMT etc are not.)
+          It should explain the use of the add_iface/remove_iface
+          callbacks as well as the interface configuration callbacks.
+        </para>
+        <para>Things related to AP mode should be discussed there.</para>
+        <para>
+          Things related to supporting multiple interfaces should be
+          in the appropriate chapter, a BIG FAT note should be here about
+          this though and the recommendation to allow only a single
+          interface in STA mode at first!
+        </para>
+!Finclude/net/mac80211.h ieee80211_vif
+      </chapter>
+
+      <chapter id="rx-tx">
+        <title>Receive and transmit processing</title>
+        <sect1>
+          <title>what should be here</title>
+          <para>TBD</para>
+          <para>
+            This should describe the receive and transmit
+            paths in mac80211/the drivers as well as
+            transmit status handling.
+          </para>
+        </sect1>
+        <sect1>
+          <title>Frame format</title>
+!Pinclude/net/mac80211.h Frame format
+        </sect1>
+        <sect1>
+          <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
+        </sect1>
+        <sect1>
+          <title>Calling into mac80211 from interrupts</title>
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+        </sect1>
+        <sect1>
+          <title>functions/definitions</title>
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h mac80211_tx_control_flags
+!Finclude/net/mac80211.h mac80211_rate_control_flags
+!Finclude/net/mac80211.h ieee80211_tx_rate
+!Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_tx_info_clear_status
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_ni
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_ni
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_wake_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+!Finclude/net/mac80211.h ieee80211_queue_stopped
+        </sect1>
+      </chapter>
+
+      <chapter id="filters">
+        <title>Frame filtering</title>
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+      </chapter>
+
+      <chapter id="workqueue">
+        <title>The mac80211 workqueue</title>
+!Pinclude/net/mac80211.h mac80211 workqueue
+!Finclude/net/mac80211.h ieee80211_queue_work
+!Finclude/net/mac80211.h ieee80211_queue_delayed_work
+      </chapter>
+    </part>
+
+    <part id="advanced">
+      <title>Advanced driver interface</title>
+      <partintro>
+        <para>
+         Information contained within this part of the book is
+         of interest only for advanced interaction of mac80211
+         with drivers to exploit more hardware capabilities and
+         improve performance.
+        </para>
+      </partintro>
+
+      <chapter id="led-support">
+        <title>LED support</title>
+        <para>
+         Mac80211 supports various ways of blinking LEDs. Wherever possible,
+         device LEDs should be exposed as LED class devices and hooked up to
+         the appropriate trigger, which will then be triggered appropriately
+         by mac80211.
+        </para>
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_tpt_blink
+!Finclude/net/mac80211.h ieee80211_tpt_led_trigger_flags
+!Finclude/net/mac80211.h ieee80211_create_tpt_led_trigger
+      </chapter>
+
+      <chapter id="hardware-crypto-offload">
+        <title>Hardware crypto acceleration</title>
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_flags
+!Finclude/net/mac80211.h ieee80211_get_tkip_p1k
+!Finclude/net/mac80211.h ieee80211_get_tkip_p1k_iv
+!Finclude/net/mac80211.h ieee80211_get_tkip_p2k
+      </chapter>
+
+      <chapter id="powersave">
+        <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+      </chapter>
+
+      <chapter id="beacon-filter">
+        <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+      </chapter>
+
+      <chapter id="qos">
+        <title>Multiple queues and QoS support</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+      </chapter>
+
+      <chapter id="AP">
+        <title>Access point mode support</title>
+        <para>TBD</para>
+        <para>Some parts of the if_conf should be discussed here instead</para>
+        <para>
+          Insert notes about VLAN interfaces with hw crypto here or
+          in the hw crypto chapter.
+        </para>
+      <section id="ps-client">
+        <title>support for powersaving clients</title>
+!Pinclude/net/mac80211.h AP support for powersaving clients
+      </section>
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+!Finclude/net/mac80211.h ieee80211_sta_eosp
+!Finclude/net/mac80211.h ieee80211_frame_release_type
+!Finclude/net/mac80211.h ieee80211_sta_ps_transition
+!Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni
+!Finclude/net/mac80211.h ieee80211_sta_set_buffered
+!Finclude/net/mac80211.h ieee80211_sta_block_awake
+      </chapter>
+
+      <chapter id="multi-iface">
+        <title>Supporting multiple virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          Note: WDS with identical MAC address should almost always be OK
+        </para>
+        <para>
+          Insert notes about having multiple virtual interfaces with
+          different MAC addresses here, note which configurations are
+          supported by mac80211, add notes about supporting hw crypto
+          with it.
+        </para>
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces_atomic
+      </chapter>
+
+      <chapter id="station-handling">
+        <title>Station handling</title>
+        <para>TODO</para>
+!Finclude/net/mac80211.h ieee80211_sta
+!Finclude/net/mac80211.h sta_notify_cmd
+!Finclude/net/mac80211.h ieee80211_find_sta
+!Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr
+      </chapter>
+
+      <chapter id="hardware-scan-offload">
+        <title>Hardware scan offload</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_scan_completed
+      </chapter>
+
+      <chapter id="aggregation">
+        <title>Aggregation</title>
+        <sect1>
+          <title>TX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-tx.c TX A-MPDU aggregation
+!Cnet/mac80211/agg-tx.c
+        </sect1>
+        <sect1>
+          <title>RX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-rx.c RX A-MPDU aggregation
+!Cnet/mac80211/agg-rx.c
+        </sect1>
+!Finclude/net/mac80211.h ieee80211_ampdu_mlme_action
+      </chapter>
+
+      <chapter id="smps">
+        <title>Spatial Multiplexing Powersave (SMPS)</title>
+!Pinclude/net/mac80211.h Spatial multiplexing power save
+!Finclude/net/mac80211.h ieee80211_request_smps
+!Finclude/net/mac80211.h ieee80211_smps_mode
+      </chapter>
+    </part>
+
+    <part id="rate-control">
+      <title>Rate control interface</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes the rate control algorithm
+         interface and how it relates to mac80211 and drivers.
+        </para>
+      </partintro>
+      <chapter id="ratecontrol-api">
+        <title>Rate Control API</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h ieee80211_rate_control_changed
+!Finclude/net/mac80211.h ieee80211_tx_rate_control
+!Finclude/net/mac80211.h rate_control_send_low
+      </chapter>
+    </part>
+
+    <part id="internal">
+      <title>Internals</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes mac80211 internals.
+        </para>
+      </partintro>
+
+      <chapter id="key-handling">
+        <title>Key handling</title>
+        <sect1>
+          <title>Key handling basics</title>
+!Pnet/mac80211/key.c Key handling basics
+        </sect1>
+        <sect1>
+          <title>MORE TBD</title>
+          <para>TBD</para>
+        </sect1>
+      </chapter>
+
+      <chapter id="rx-processing">
+        <title>Receive processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="tx-processing">
+        <title>Transmit processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="sta-info">
+        <title>Station info handling</title>
+        <sect1>
+          <title>Programming information</title>
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+        </sect1>
+        <sect1>
+          <title>STA information lifetime rules</title>
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+        </sect1>
+      </chapter>
+
+      <chapter id="aggregation-internals">
+        <title>Aggregation</title>
+!Fnet/mac80211/sta_info.h sta_ampdu_mlme
+!Fnet/mac80211/sta_info.h tid_ampdu_tx
+!Fnet/mac80211/sta_info.h tid_ampdu_rx
+      </chapter>
+
+      <chapter id="synchronisation">
+        <title>Synchronisation</title>
+        <para>TBD</para>
+        <para>Locking, lots of RCU</para>
+      </chapter>
+    </part>
+  </book>
+</set>

linux-imx/Documentation/DocBook/Makefile

diff --git a/linux-imx/Documentation/DocBook/Makefile b/linux-imx/Documentation/DocBook/Makefile
new file mode 100644
index 0000000..bc3d9f8
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/Makefile
@@ -0,0 +1,241 @@
+###
+# This makefile is used to generate the kernel documentation,
+# primarily based on in-line comments in various source files.
+# See Documentation/kernel-doc-nano-HOWTO.txt for instruction in how
+# to document the SRC - and how to read it.
+# To add a new book the only step required is to add the book to the
+# list of DOCBOOKS.
+
+DOCBOOKS := z8530book.xml device-drivers.xml \
+	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
+	    writing_usb_driver.xml networking.xml \
+	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
+	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
+	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
+	    80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml \
+	    tracepoint.xml drm.xml media_api.xml
+
+include $(srctree)/Documentation/DocBook/media/Makefile
+
+###
+# The build process is as follows (targets):
+#              (xmldocs) [by docproc]
+# file.tmpl --> file.xml +--> file.ps   (psdocs)   [by db2ps or xmlto]
+#                        +--> file.pdf  (pdfdocs)  [by db2pdf or xmlto]
+#                        +--> DIR=file  (htmldocs) [by xmlto]
+#                        +--> man/      (mandocs)  [by xmlto]
+
+
+# for PDF and PS output you can choose between xmlto and docbook-utils tools
+PDF_METHOD	= $(prefer-db2x)
+PS_METHOD	= $(prefer-db2x)
+
+
+###
+# The targets that may be used.
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
+
+BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
+xmldocs: $(BOOKS)
+sgmldocs: xmldocs
+
+PS := $(patsubst %.xml, %.ps, $(BOOKS))
+psdocs: $(PS)
+
+PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
+pdfdocs: $(PDF)
+
+HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
+htmldocs: $(HTML)
+	$(call build_main_index)
+	$(call build_images)
+	$(call install_media_images)
+
+MAN := $(patsubst %.xml, %.9, $(BOOKS))
+mandocs: $(MAN)
+
+installmandocs: mandocs
+	mkdir -p /usr/local/man/man9/
+	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/
+
+###
+#External programs used
+KERNELDOC = $(srctree)/scripts/kernel-doc
+DOCPROC   = $(objtree)/scripts/docproc
+
+XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
+XMLTOFLAGS += --skip-validation
+
+###
+# DOCPROC is used for two purposes:
+# 1) To generate a dependency list for a .tmpl file
+# 2) To preprocess a .tmpl file and call kernel-doc with
+#     appropriate parameters.
+# The following rules are used to generate the .xml documentation
+# required to generate the final targets. (ps, pdf, html).
+quiet_cmd_docproc = DOCPROC $@
+      cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $< >$@
+define rule_docproc
+	set -e;								\
+        $(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))';) 	\
+        $(cmd_$(1)); 							\
+        ( 								\
+          echo 'cmd_$@ := $(cmd_$(1))'; 				\
+          echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`; 		\
+        ) > $(dir $@).$(notdir $@).cmd
+endef
+
+%.xml: %.tmpl FORCE
+	$(call if_changed_rule,docproc)
+
+###
+#Read in all saved dependency files
+cmd_files := $(wildcard $(foreach f,$(BOOKS),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  include $(cmd_files)
+endif
+
+###
+# Changes in kernel-doc force a rebuild of all documentation
+$(BOOKS): $(KERNELDOC)
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
+		   exit 1
+db2xtemplate = db2TYPE -o $(dir $@) $<
+xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $<
+
+# determine which methods are available
+ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found)
+	use-db2x = db2x
+	prefer-db2x = db2x
+else
+	use-db2x = notfound
+	prefer-db2x = $(use-xmlto)
+endif
+ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found)
+	use-xmlto = xmlto
+	prefer-xmlto = xmlto
+else
+	use-xmlto = notfound
+	prefer-xmlto = $(use-db2x)
+endif
+
+# the commands, generated from the chosen template
+quiet_cmd_db2ps = PS      $@
+      cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template))
+%.ps : %.xml
+	$(call cmd,db2ps)
+
+quiet_cmd_db2pdf = PDF     $@
+      cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
+%.pdf : %.xml
+	$(call cmd,db2pdf)
+
+
+index = index.html
+main_idx = Documentation/DocBook/$(index)
+build_main_index = rm -rf $(main_idx); \
+		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
+		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
+		   cat $(HTML) >> $(main_idx)
+
+quiet_cmd_db2html = HTML    $@
+      cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
+		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
+        $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
+
+%.html:	%.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
+	  exit 1)
+	@rm -rf $@ $(patsubst %.html,%,$@)
+	$(call cmd,db2html)
+	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
+            cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
+
+quiet_cmd_db2man = MAN     $@
+      cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+%.9 : %.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
+	  exit 1)
+	$(Q)mkdir -p $(obj)/man
+	$(call cmd,db2man)
+	@touch $@
+
+###
+# Rules to generate postscripts and PNG images from .fig format files
+quiet_cmd_fig2eps = FIG2EPS $@
+      cmd_fig2eps = fig2dev -Leps $< $@
+
+%.eps: %.fig
+	@(which fig2dev > /dev/null 2>&1) || \
+	 (echo "*** You need to install transfig ***"; \
+	  exit 1)
+	$(call cmd,fig2eps)
+
+quiet_cmd_fig2png = FIG2PNG $@
+      cmd_fig2png = fig2dev -Lpng $< $@
+
+%.png: %.fig
+	@(which fig2dev > /dev/null 2>&1) || \
+	 (echo "*** You need to install transfig ***"; \
+	  exit 1)
+	$(call cmd,fig2png)
+
+###
+# Rule to convert a .c file to inline XML documentation
+       gen_xml = :
+ quiet_gen_xml = echo '  GEN     $@'
+silent_gen_xml = :
+%.xml: %.c
+	@$($(quiet)gen_xml)
+	@(                            \
+	   echo "<programlisting>";   \
+	   expand --tabs=8 < $< |     \
+	   sed -e "s/&/\\&amp;/g"     \
+	       -e "s/</\\&lt;/g"      \
+	       -e "s/>/\\&gt;/g";     \
+	   echo "</programlisting>")  > $@
+
+###
+# Help targets as used by the top-level makefile
+dochelp:
+	@echo  ' Linux kernel internal documentation in different formats:'
+	@echo  '  htmldocs        - HTML'
+	@echo  '  pdfdocs         - PDF'
+	@echo  '  psdocs          - Postscript'
+	@echo  '  xmldocs         - XML DocBook'
+	@echo  '  mandocs         - man pages'
+	@echo  '  installmandocs  - install man pages generated by mandocs'
+	@echo  '  cleandocs       - clean all generated DocBook files'
+
+###
+# Temporary files left by various tools
+clean-files := $(DOCBOOKS) \
+	$(patsubst %.xml, %.dvi,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.aux,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.tex,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.log,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.out,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.ps,   $(DOCBOOKS)) \
+	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
+	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
+	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
+	$(index)
+
+clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
+
+cleandocs: cleanmediadocs
+	$(Q)rm -f $(call objectify, $(clean-files))
+	$(Q)rm -rf $(call objectify, $(clean-dirs))
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)

linux-imx/Documentation/DocBook/alsa-driver-api.tmpl

diff --git a/linux-imx/Documentation/DocBook/alsa-driver-api.tmpl b/linux-imx/Documentation/DocBook/alsa-driver-api.tmpl
new file mode 100644
index 0000000..0230a96
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/alsa-driver-api.tmpl
@@ -0,0 +1,109 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<!-- ****************************************************** -->
+<!-- Header  -->
+<!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
+  <bookinfo>
+    <title>The ALSA Driver API</title>
+
+    <legalnotice>
+    <para>
+    This document is free; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version. 
+    </para>
+
+    <para>
+    This document is distributed in the hope that it will be useful,
+    but <emphasis>WITHOUT ANY WARRANTY</emphasis>; without even the
+    implied warranty of <emphasis>MERCHANTABILITY or FITNESS FOR A
+    PARTICULAR PURPOSE</emphasis>. See the GNU General Public License
+    for more details.
+    </para>
+
+    <para>
+    You should have received a copy of the GNU General Public
+    License along with this program; if not, write to the Free
+    Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    MA 02111-1307 USA
+    </para>
+    </legalnotice>
+
+  </bookinfo>
+
+<toc></toc>
+
+  <chapter><title>Management of Cards and Devices</title>
+     <sect1><title>Card Management</title>
+!Esound/core/init.c
+     </sect1>
+     <sect1><title>Device Components</title>
+!Esound/core/device.c
+     </sect1>
+     <sect1><title>Module requests and Device File Entries</title>
+!Esound/core/sound.c
+     </sect1>
+     <sect1><title>Memory Management Helpers</title>
+!Esound/core/memory.c
+!Esound/core/memalloc.c
+     </sect1>
+  </chapter>
+  <chapter><title>PCM API</title>
+     <sect1><title>PCM Core</title>
+!Esound/core/pcm.c
+!Esound/core/pcm_lib.c
+!Esound/core/pcm_native.c
+     </sect1>
+     <sect1><title>PCM Format Helpers</title>
+!Esound/core/pcm_misc.c
+     </sect1>
+     <sect1><title>PCM Memory Management</title>
+!Esound/core/pcm_memory.c
+     </sect1>
+  </chapter>
+  <chapter><title>Control/Mixer API</title>
+     <sect1><title>General Control Interface</title>
+!Esound/core/control.c
+     </sect1>
+     <sect1><title>AC97 Codec API</title>
+!Esound/pci/ac97/ac97_codec.c
+!Esound/pci/ac97/ac97_pcm.c
+     </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
+  </chapter>
+  <chapter><title>MIDI API</title>
+     <sect1><title>Raw MIDI API</title>
+!Esound/core/rawmidi.c
+     </sect1>
+     <sect1><title>MPU401-UART API</title>
+!Esound/drivers/mpu401/mpu401_uart.c
+     </sect1>
+  </chapter>
+  <chapter><title>Proc Info API</title>
+     <sect1><title>Proc Info Interface</title>
+!Esound/core/info.c
+     </sect1>
+  </chapter>
+  <chapter><title>Miscellaneous Functions</title>
+     <sect1><title>Hardware-Dependent Devices API</title>
+!Esound/core/hwdep.c
+     </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
+     </sect1>
+     <sect1><title>ISA DMA Helpers</title>
+!Esound/core/isadma.c
+     </sect1>
+     <sect1><title>Other Helper Macros</title>
+!Iinclude/sound/core.h
+     </sect1>
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/debugobjects.tmpl

diff --git a/linux-imx/Documentation/DocBook/debugobjects.tmpl b/linux-imx/Documentation/DocBook/debugobjects.tmpl
new file mode 100644
index 0000000..24979f6
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/debugobjects.tmpl
@@ -0,0 +1,441 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="debug-objects-guide">
+ <bookinfo>
+  <title>Debug objects life time</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Thomas</firstname>
+    <surname>Gleixner</surname>
+    <affiliation>
+     <address>
+      <email>tglx@linutronix.de</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2008</year>
+   <holder>Thomas Gleixner</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+    <title>Introduction</title>
+    <para>
+      debugobjects is a generic infrastructure to track the life time
+      of kernel objects and validate the operations on those.
+    </para>
+    <para>
+      debugobjects is useful to check for the following error patterns:
+	<itemizedlist>
+	  <listitem><para>Activation of uninitialized objects</para></listitem>
+	  <listitem><para>Initialization of active objects</para></listitem>
+	  <listitem><para>Usage of freed/destroyed objects</para></listitem>
+	</itemizedlist>
+    </para>
+    <para>
+      debugobjects is not changing the data structure of the real
+      object so it can be compiled in with a minimal runtime impact
+      and enabled on demand with a kernel command line option.
+    </para>
+  </chapter>
+
+  <chapter id="howto">
+    <title>Howto use debugobjects</title>
+    <para>
+      A kernel subsystem needs to provide a data structure which
+      describes the object type and add calls into the debug code at
+      appropriate places. The data structure to describe the object
+      type needs at minimum the name of the object type. Optional
+      functions can and should be provided to fixup detected problems
+      so the kernel can continue to work and the debug information can
+      be retrieved from a live system instead of hard core debugging
+      with serial consoles and stack trace transcripts from the
+      monitor.
+    </para>
+    <para>
+      The debug calls provided by debugobjects are:
+      <itemizedlist>
+	<listitem><para>debug_object_init</para></listitem>
+	<listitem><para>debug_object_init_on_stack</para></listitem>
+	<listitem><para>debug_object_activate</para></listitem>
+	<listitem><para>debug_object_deactivate</para></listitem>
+	<listitem><para>debug_object_destroy</para></listitem>
+	<listitem><para>debug_object_free</para></listitem>
+	<listitem><para>debug_object_assert_init</para></listitem>
+      </itemizedlist>
+      Each of these functions takes the address of the real object and
+      a pointer to the object type specific debug description
+      structure.
+    </para>
+    <para>
+      Each detected error is reported in the statistics and a limited
+      number of errors are printk'ed including a full stack trace.
+    </para>
+    <para>
+      The statistics are available via /sys/kernel/debug/debug_objects/stats.
+      They provide information about the number of warnings and the
+      number of successful fixups along with information about the
+      usage of the internal tracking objects and the state of the
+      internal tracking objects pool.
+    </para>
+  </chapter>
+  <chapter id="debugfunctions">
+    <title>Debug functions</title>
+    <sect1 id="prototypes">
+      <title>Debug object function reference</title>
+!Elib/debugobjects.c
+    </sect1>
+    <sect1 id="debug_object_init">
+      <title>debug_object_init</title>
+      <para>
+	This function is called whenever the initialization function
+	of a real object is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be initialized.  Initializing
+	is not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the fixup_init
+	function of the object type description structure if provided
+	by the caller. The fixup function can correct the problem
+	before the real initialization of the object happens. E.g. it
+	can deactivate an active object in order to prevent damage to
+	the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects,
+	debugobjects allocates a tracker object for the real object
+	and sets the tracker object state to ODEBUG_STATE_INIT. It
+	verifies that the object is not on the callers stack. If it is
+	on the callers stack then a limited number of warnings
+	including a full stack trace is printk'ed. The calling code
+	must use debug_object_init_on_stack() and remove the object
+	before leaving the function which allocated it. See next
+	section.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_init_on_stack">
+      <title>debug_object_init_on_stack</title>
+      <para>
+	This function is called whenever the initialization function
+	of a real object which resides on the stack is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be initialized. Initializing
+	is not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the fixup_init
+	function of the object type description structure if provided
+	by the caller. The fixup function can correct the problem
+	before the real initialization of the object happens. E.g. it
+	can deactivate an active object in order to prevent damage to
+	the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects
+	debugobjects allocates a tracker object for the real object
+	and sets the tracker object state to ODEBUG_STATE_INIT. It
+	verifies that the object is on the callers stack.
+      </para>
+      <para>
+	An object which is on the stack must be removed from the
+	tracker by calling debug_object_free() before the function
+	which allocates the object returns. Otherwise we keep track of
+	stale objects.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_activate">
+      <title>debug_object_activate</title>
+      <para>
+	This function is called whenever the activation function of a
+	real object is called.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	checked, whether the object can be activated.  Activating is
+	not allowed for active and destroyed objects. When
+	debugobjects detects an error, then it calls the
+	fixup_activate function of the object type description
+	structure if provided by the caller. The fixup function can
+	correct the problem before the real activation of the object
+	happens. E.g. it can deactivate an active object in order to
+	prevent damage to the subsystem.
+      </para>
+      <para>
+	When the real object is not yet tracked by debugobjects then
+	the fixup_activate function is called if available. This is
+	necessary to allow the legitimate activation of statically
+	allocated and initialized objects. The fixup function checks
+	whether the object is valid and calls the debug_objects_init()
+	function to initialize the tracking of this object.
+      </para>
+      <para>
+	When the activation is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_ACTIVE.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_deactivate">
+      <title>debug_object_deactivate</title>
+      <para>
+	This function is called whenever the deactivation function of
+	a real object is called.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be deactivated. Deactivating is not
+	allowed for untracked or destroyed objects.
+      </para>
+      <para>
+	When the deactivation is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_INACTIVE.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_destroy">
+      <title>debug_object_destroy</title>
+      <para>
+	This function is called to mark an object destroyed. This is
+	useful to prevent the usage of invalid objects, which are
+	still available in memory: either statically allocated objects
+	or objects which are freed later.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be destroyed. Destruction is not
+	allowed for active and destroyed objects. When debugobjects
+	detects an error, then it calls the fixup_destroy function of
+	the object type description structure if provided by the
+	caller. The fixup function can correct the problem before the
+	real destruction of the object happens. E.g. it can deactivate
+	an active object in order to prevent damage to the subsystem.
+      </para>
+      <para>
+	When the destruction is legitimate, then the state of the
+	associated tracker object is set to ODEBUG_STATE_DESTROYED.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_free">
+      <title>debug_object_free</title>
+      <para>
+	This function is called before an object is freed.
+      </para>
+      <para>
+	When the real object is tracked by debugobjects it is checked,
+	whether the object can be freed. Free is not allowed for
+	active objects. When debugobjects detects an error, then it
+	calls the fixup_free function of the object type description
+	structure if provided by the caller. The fixup function can
+	correct the problem before the real free of the object
+	happens. E.g. it can deactivate an active object in order to
+	prevent damage to the subsystem.
+      </para>
+      <para>
+	Note that debug_object_free removes the object from the
+	tracker. Later usage of the object is detected by the other
+	debug checks.
+      </para>
+    </sect1>
+
+    <sect1 id="debug_object_assert_init">
+      <title>debug_object_assert_init</title>
+      <para>
+	This function is called to assert that an object has been
+	initialized.
+      </para>
+      <para>
+	When the real object is not tracked by debugobjects, it calls
+	fixup_assert_init of the object type description structure
+	provided by the caller, with the hardcoded object state
+	ODEBUG_NOT_AVAILABLE. The fixup function can correct the problem
+	by calling debug_object_init and other specific initializing
+	functions.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	ignored.
+      </para>
+    </sect1>
+  </chapter>
+  <chapter id="fixupfunctions">
+    <title>Fixup functions</title>
+    <sect1 id="debug_obj_descr">
+      <title>Debug object type description structure</title>
+!Iinclude/linux/debugobjects.h
+    </sect1>
+    <sect1 id="fixup_init">
+      <title>fixup_init</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_init is detected. The function takes the
+	address of the object and the state which is currently
+	recorded in the tracker.
+      </para>
+      <para>
+	Called from debug_object_init when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note, that the function needs to call the debug_object_init()
+	function again, after the damage has been repaired in order to
+	keep the state consistent.
+      </para>
+    </sect1>
+
+    <sect1 id="fixup_activate">
+      <title>fixup_activate</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_activate is detected.
+      </para>
+      <para>
+	Called from debug_object_activate when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_NOTAVAILABLE</para></listitem>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note that the function needs to call the debug_object_activate()
+	function again after the damage has been repaired in order to
+	keep the state consistent.
+      </para>
+      <para>
+	The activation of statically initialized objects is a special
+	case. When debug_object_activate() has no tracked object for
+	this object address then fixup_activate() is called with
+	object state ODEBUG_STATE_NOTAVAILABLE. The fixup function
+	needs to check whether this is a legitimate case of a
+	statically initialized object or not. In case it is it calls
+	debug_object_init() and debug_object_activate() to make the
+	object known to the tracker and marked active. In this case
+	the function should return 0 because this is not a real fixup.
+      </para>
+    </sect1>
+
+    <sect1 id="fixup_destroy">
+      <title>fixup_destroy</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_destroy is detected.
+      </para>
+      <para>
+	Called from debug_object_destroy when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+    </sect1>
+    <sect1 id="fixup_free">
+      <title>fixup_free</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_free is detected. Further it can be called
+	from the debug checks in kfree/vfree, when an active object is
+	detected from the debug_check_no_obj_freed() sanity checks.
+      </para>
+      <para>
+	Called from debug_object_free() or debug_check_no_obj_freed()
+	when the object state is:
+	<itemizedlist>
+	  <listitem><para>ODEBUG_STATE_ACTIVE</para></listitem>
+	</itemizedlist>
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+    </sect1>
+    <sect1 id="fixup_assert_init">
+      <title>fixup_assert_init</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_assert_init is detected.
+      </para>
+      <para>
+	Called from debug_object_assert_init() with a hardcoded state
+	ODEBUG_STATE_NOTAVAILABLE when the object is not found in the
+	debug bucket.
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note, this function should make sure debug_object_init() is
+	called before returning.
+      </para>
+      <para>
+	The handling of statically initialized objects is a special
+	case. The fixup function should check if this is a legitimate
+	case of a statically initialized object or not. In this case only
+	debug_object_init() should be called to make the object known to
+	the tracker. Then the function should return 0 because this is not
+	a real fixup.
+      </para>
+    </sect1>
+  </chapter>
+  <chapter id="bugs">
+    <title>Known Bugs And Assumptions</title>
+    <para>
+	None (knock on wood).
+    </para>
+  </chapter>
+</book>

linux-imx/Documentation/DocBook/device-drivers.tmpl

diff --git a/linux-imx/Documentation/DocBook/device-drivers.tmpl b/linux-imx/Documentation/DocBook/device-drivers.tmpl
new file mode 100644
index 0000000..c36892c
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/device-drivers.tmpl
@@ -0,0 +1,466 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxDriversAPI">
+ <bookinfo>
+  <title>Linux Device Drivers</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="Basics">
+     <title>Driver Basics</title>
+     <sect1><title>Driver Entry and Exit points</title>
+!Iinclude/linux/init.h
+     </sect1>
+
+     <sect1><title>Atomic and pointer manipulation</title>
+!Iarch/x86/include/asm/atomic.h
+     </sect1>
+
+     <sect1><title>Delaying, scheduling, and timer routines</title>
+!Iinclude/linux/sched.h
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
+!Iinclude/linux/completion.h
+!Ekernel/timer.c
+     </sect1>
+     <sect1><title>Wait queues and Wake events</title>
+!Iinclude/linux/wait.h
+!Ekernel/wait.c
+     </sect1>
+     <sect1><title>High-resolution timers</title>
+!Iinclude/linux/ktime.h
+!Iinclude/linux/hrtimer.h
+!Ekernel/hrtimer.c
+     </sect1>
+     <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
+     </sect1>
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+!Iinclude/linux/kthread.h
+!Ekernel/kthread.c
+     </sect1>
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+!Ekernel/printk.c
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
+     <sect1><title>Device Resource Management</title>
+!Edrivers/base/devres.c
+     </sect1>
+
+  </chapter>
+
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>The Basic Device Driver-Model Structures </title>
+!Iinclude/linux/device.h
+     </sect1>
+     <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
+!Edrivers/base/driver.c
+!Edrivers/base/core.c
+!Edrivers/base/syscore.c
+!Edrivers/base/class.c
+!Idrivers/base/node.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/dd.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Iinclude/linux/platform_device.h
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+!Idrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Idrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Idrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+     <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+     </sect1>
+  </chapter>
+
+  <chapter id="parportdev">
+     <title>Parallel Port Devices</title>
+!Iinclude/linux/parport.h
+!Edrivers/parport/ieee1284.c
+!Edrivers/parport/share.c
+!Idrivers/parport/daisy.c
+  </chapter>
+
+  <chapter id="message_devices">
+	<title>Message-based devices</title>
+     <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+     </sect1>
+     <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+     </sect1>
+  </chapter>
+
+  <chapter id="snddev">
+     <title>Sound Devices</title>
+!Iinclude/sound/core.h
+!Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Isound/sound_firmware.c
+-->
+  </chapter>
+
+  <chapter id="uart16x50">
+     <title>16x50 UART Driver</title>
+!Edrivers/tty/serial/serial_core.c
+!Edrivers/tty/serial/8250/8250_core.c
+  </chapter>
+
+  <chapter id="fbdev">
+     <title>Frame Buffer Library</title>
+
+     <para>
+       The frame buffer drivers depend heavily on four data structures.
+       These structures are declared in include/linux/fb.h.  They are
+       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+       The last three can be made available to and from userland.
+     </para>
+
+     <para>
+       fb_info defines the current state of a particular video card.
+       Inside fb_info, there exists a fb_ops structure which is a
+       collection of needed functions to make fbdev and fbcon work.
+       fb_info is only visible to the kernel.
+     </para>
+
+     <para>
+       fb_var_screeninfo is used to describe the features of a video card
+       that are user defined.  With fb_var_screeninfo, things such as
+       depth and the resolution may be defined.
+     </para>
+
+     <para>
+       The next structure is fb_fix_screeninfo. This defines the
+       properties of a card that are created when a mode is set and can't
+       be changed otherwise.  A good example of this is the start of the
+       frame buffer memory.  This "locks" the address of the frame buffer
+       memory, so that it cannot be changed or moved.
+     </para>
+
+     <para>
+       The last structure is fb_monospecs. In the old API, there was
+       little importance for fb_monospecs. This allowed for forbidden things
+       such as setting a mode of 800x600 on a fix frequency monitor. With
+       the new API, fb_monospecs prevents such things, and if used
+       correctly, can prevent a monitor from being cooked.  fb_monospecs
+       will not be useful until kernels 2.5.x.
+     </para>
+
+     <sect1><title>Frame Buffer Memory</title>
+!Edrivers/video/fbmem.c
+     </sect1>
+<!--
+     <sect1><title>Frame Buffer Console</title>
+X!Edrivers/video/console/fbcon.c
+     </sect1>
+-->
+     <sect1><title>Frame Buffer Colormap</title>
+!Edrivers/video/fbcmap.c
+     </sect1>
+<!-- FIXME:
+  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
+  out until somebody adds docs.  KAO
+     <sect1><title>Frame Buffer Generic Functions</title>
+X!Idrivers/video/fbgen.c
+     </sect1>
+KAO -->
+     <sect1><title>Frame Buffer Video Mode Database</title>
+!Idrivers/video/modedb.c
+!Edrivers/video/modedb.c
+     </sect1>
+     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+!Edrivers/video/macmodes.c
+     </sect1>
+     <sect1><title>Frame Buffer Fonts</title>
+        <para>
+           Refer to the file drivers/video/console/fonts.c for more information.
+        </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Idrivers/video/console/fonts.c
+-->
+     </sect1>
+  </chapter>
+
+  <chapter id="input_subsystem">
+     <title>Input Subsystem</title>
+     <sect1><title>Input core</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+     </sect1>
+     <sect1><title>Multitouch Library</title>
+!Iinclude/linux/input/mt.h
+!Edrivers/input/input-mt.c
+     </sect1>
+     <sect1><title>Polled input devices</title>
+!Iinclude/linux/input-polldev.h
+!Edrivers/input/input-polldev.c
+     </sect1>
+     <sect1><title>Matrix keyboars/keypads</title>
+!Iinclude/linux/input/matrix_keypad.h
+     </sect1>
+     <sect1><title>Sparse keymap support</title>
+!Iinclude/linux/input/sparse-keymap.h
+!Edrivers/input/sparse-keymap.c
+     </sect1>
+  </chapter>
+
+  <chapter id="spi">
+      <title>Serial Peripheral Interface (SPI)</title>
+  <para>
+	SPI is the "Serial Peripheral Interface", widely used with
+	embedded systems because it is a simple and efficient
+	interface:  basically a multiplexed shift register.
+	Its three signal wires hold a clock (SCK, often in the range
+	of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+	a "Master In, Slave Out" (MISO) data line.
+	SPI is a full duplex protocol; for each bit shifted out the
+	MOSI line (one per clock) another is shifted in on the MISO line.
+	Those bits are assembled into words of various sizes on the
+	way to and from system memory.
+	An additional chipselect line is usually active-low (nCS);
+	four signals are normally used for each peripheral, plus
+	sometimes an interrupt.
+  </para>
+  <para>
+	The SPI bus facilities listed here provide a generalized
+	interface to declare SPI busses and devices, manage them
+	according to the standard Linux driver model, and perform
+	input/output operations.
+	At this time, only "master" side interfaces are supported,
+	where Linux talks to SPI peripherals and does not implement
+	such a peripheral itself.
+	(Interfaces to support implementing SPI slaves would
+	necessarily look different.)
+  </para>
+  <para>
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	A "Controller Driver" abstracts the controller hardware, which may
+	be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+	connected to dual DMA engines on the other side of the SPI shift
+	register (maximizing throughput).  Such drivers bridge between
+	whatever bus they sit on (often the platform bus) and SPI, and
+	expose the SPI side of their device as a
+	<structname>struct spi_master</structname>.
+	SPI devices are children of that master, represented as a
+	<structname>struct spi_device</structname> and manufactured from
+	<structname>struct spi_board_info</structname> descriptors which
+	are usually provided by board-specific initialization code.
+	A <structname>struct spi_driver</structname> is called a
+	"Protocol Driver", and is bound to a spi_device using normal
+	driver model calls.
+  </para>
+  <para>
+	The I/O model is a set of queued messages.  Protocol drivers
+	submit one or more <structname>struct spi_message</structname>
+	objects, which are processed and completed asynchronously.
+	(There are synchronous wrappers, however.)  Messages are
+	built from one or more <structname>struct spi_transfer</structname>
+	objects, each of which wraps a full duplex SPI transfer.
+	A variety of protocol tweaking options are needed, because
+	different chips adopt very different policies for how they
+	use the bits transferred with SPI.
+  </para>
+!Iinclude/linux/spi/spi.h
+!Fdrivers/spi/spi.c spi_register_board_info
+!Edrivers/spi/spi.c
+  </chapter>
+
+  <chapter id="i2c">
+     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+     <para>
+	I<superscript>2</superscript>C (or without fancy typography, "I2C")
+	is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+	widely used where low data rate communications suffice.
+	Since it's also a licensed trademark, some vendors use another
+	name (such as "Two-Wire Interface", TWI) for the same bus.
+	I2C only needs two signals (SCL for clock, SDA for data), conserving
+	board real estate and minimizing signal quality issues.
+	Most I2C devices use seven bit addresses, and bus speeds of up
+	to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+	found wide use.
+	I2C is a multi-master bus; open drain signaling is used to
+	arbitrate between masters, as well as to handshake and to
+	synchronize clocks from slower clients.
+     </para>
+
+     <para>
+	The Linux I2C programming interfaces support only the master
+	side of bus interactions, not the slave side.
+	The programming interface is structured around two kinds of driver,
+	and two kinds of device.
+	An I2C "Adapter Driver" abstracts the controller hardware; it binds
+	to a physical device (perhaps a PCI device or platform_device) and
+	exposes a <structname>struct i2c_adapter</structname> representing
+	each I2C bus segment it manages.
+	On each I2C bus segment will be I2C devices represented by a
+	<structname>struct i2c_client</structname>.  Those devices will
+	be bound to a <structname>struct i2c_driver</structname>,
+	which should follow the standard Linux driver model.
+	(At this writing, a legacy model is more widely used.)
+	There are functions to perform various I2C protocol operations; at
+	this writing all such functions are usable only from task context.
+     </para>
+
+     <para>
+	The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
+	systems are also I2C conformant.  The electrical constraints are
+	tighter for SMBus, and it standardizes particular protocol messages
+	and idioms.  Controllers that support I2C can also support most
+	SMBus operations, but SMBus controllers don't support all the protocol
+	options that an I2C controller will.
+	There are functions to perform various SMBus protocol operations,
+	either using I2C primitives or by issuing SMBus commands to
+	i2c_adapter devices which don't support those I2C operations.
+     </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+  </chapter>
+
+  <chapter id="hsi">
+     <title>High Speed Synchronous Serial Interface (HSI)</title>
+
+     <para>
+	High Speed Synchronous Serial Interface (HSI) is a
+	serial interface mainly used for connecting application
+	engines (APE) with cellular modem engines (CMT) in cellular
+	handsets.
+
+	HSI provides multiplexing for up to 16 logical channels,
+	low-latency and full duplex communication.
+     </para>
+
+!Iinclude/linux/hsi/hsi.h
+!Edrivers/hsi/hsi.c
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/deviceiobook.tmpl

diff --git a/linux-imx/Documentation/DocBook/deviceiobook.tmpl b/linux-imx/Documentation/DocBook/deviceiobook.tmpl
new file mode 100644
index 0000000..54199a0
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/deviceiobook.tmpl
@@ -0,0 +1,323 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="DoingIO">
+ <bookinfo>
+  <title>Bus-Independent Device Accesses</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Matthew</firstname>
+    <surname>Wilcox</surname>
+    <affiliation>
+     <address>
+      <email>matthew@wil.cx</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <authorgroup>
+   <author>
+    <firstname>Alan</firstname>
+    <surname>Cox</surname>
+    <affiliation>
+     <address>
+      <email>alan@lxorguk.ukuu.org.uk</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2001</year>
+   <holder>Matthew Wilcox</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+      <title>Introduction</title>
+  <para>
+	Linux provides an API which abstracts performing IO across all busses
+	and devices, allowing device drivers to be written independently of
+	bus type.
+  </para>
+  </chapter>
+
+  <chapter id="bugs">
+     <title>Known Bugs And Assumptions</title>
+  <para>
+	None.	
+  </para>
+  </chapter>
+
+  <chapter id="mmio">
+    <title>Memory Mapped IO</title>
+    <sect1 id="getting_access_to_the_device">
+      <title>Getting Access to the Device</title>
+      <para>
+	The most widely supported form of IO is memory mapped IO.
+	That is, a part of the CPU's address space is interpreted
+	not as accesses to memory, but as accesses to a device.  Some
+	architectures define devices to be at a fixed address, but most
+	have some method of discovering devices.  The PCI bus walk is a
+	good example of such a scheme.	This document does not cover how
+	to receive such an address, but assumes you are starting with one.
+	Physical addresses are of type unsigned long. 
+      </para>
+
+      <para>
+	This address should not be used directly.  Instead, to get an
+	address suitable for passing to the accessor functions described
+	below, you should call <function>ioremap</function>.
+	An address suitable for accessing the device will be returned to you.
+      </para>
+
+      <para>
+	After you've finished using the device (say, in your module's
+	exit routine), call <function>iounmap</function> in order to return
+	the address space to the kernel.  Most architectures allocate new
+	address space each time you call <function>ioremap</function>, and
+	they can run out unless you call <function>iounmap</function>.
+      </para>
+    </sect1>
+
+    <sect1 id="accessing_the_device">
+      <title>Accessing the device</title>
+      <para>
+	The part of the interface most used by drivers is reading and
+	writing memory-mapped registers on the device.	Linux provides
+	interfaces to read and write 8-bit, 16-bit, 32-bit and 64-bit
+	quantities.  Due to a historical accident, these are named byte,
+	word, long and quad accesses.  Both read and write accesses are
+	supported; there is no prefetch support at this time.
+      </para>
+
+      <para>
+	The functions are named <function>readb</function>,
+	<function>readw</function>, <function>readl</function>,
+	<function>readq</function>, <function>readb_relaxed</function>,
+	<function>readw_relaxed</function>, <function>readl_relaxed</function>,
+	<function>readq_relaxed</function>, <function>writeb</function>,
+	<function>writew</function>, <function>writel</function> and
+	<function>writeq</function>.
+      </para>
+
+      <para>
+	Some devices (such as framebuffers) would like to use larger
+	transfers than 8 bytes at a time.  For these devices, the
+	<function>memcpy_toio</function>, <function>memcpy_fromio</function>
+	and <function>memset_io</function> functions are provided.
+	Do not use memset or memcpy on IO addresses; they
+	are not guaranteed to copy data in order.
+      </para>
+
+      <para>
+	The read and write functions are defined to be ordered. That is the
+	compiler is not permitted to reorder the I/O sequence. When the 
+	ordering can be compiler optimised, you can use <function>
+	__readb</function> and friends to indicate the relaxed ordering. Use 
+	this with care.
+      </para>
+
+      <para>
+	While the basic functions are defined to be synchronous with respect
+	to each other and ordered with respect to each other the busses the
+	devices sit on may themselves have asynchronicity. In particular many
+	authors are burned by the fact that PCI bus writes are posted
+	asynchronously. A driver author must issue a read from the same
+	device to ensure that writes have occurred in the specific cases the
+	author cares. This kind of property cannot be hidden from driver
+	writers in the API.  In some cases, the read used to flush the device
+	may be expected to fail (if the card is resetting, for example).  In
+	that case, the read should be done from config space, which is
+	guaranteed to soft-fail if the card doesn't respond.
+      </para>
+
+      <para>
+	The following is an example of flushing a write to a device when
+	the driver would like to ensure the write's effects are visible prior
+	to continuing execution.
+      </para>
+
+<programlisting>
+static inline void
+qla1280_disable_intrs(struct scsi_qla_host *ha)
+{
+	struct device_reg *reg;
+
+	reg = ha->iobase;
+	/* disable risc and host interrupts */
+	WRT_REG_WORD(&amp;reg->ictrl, 0);
+	/*
+	 * The following read will ensure that the above write
+	 * has been received by the device before we return from this
+	 * function.
+	 */
+	RD_REG_WORD(&amp;reg->ictrl);
+	ha->flags.ints_enabled = 0;
+}
+</programlisting>
+
+      <para>
+	In addition to write posting, on some large multiprocessing systems
+	(e.g. SGI Challenge, Origin and Altix machines) posted writes won't
+	be strongly ordered coming from different CPUs.  Thus it's important
+	to properly protect parts of your driver that do memory-mapped writes
+	with locks and use the <function>mmiowb</function> to make sure they
+	arrive in the order intended.  Issuing a regular <function>readX
+	</function> will also ensure write ordering, but should only be used
+	when the driver has to be sure that the write has actually arrived
+	at the device (not that it's simply ordered with respect to other
+	writes), since a full <function>readX</function> is a relatively
+	expensive operation.
+      </para>
+
+      <para>
+	Generally, one should use <function>mmiowb</function> prior to
+	releasing a spinlock that protects regions using <function>writeb
+	</function> or similar functions that aren't surrounded by <function>
+	readb</function> calls, which will ensure ordering and flushing.  The
+	following pseudocode illustrates what might occur if write ordering
+	isn't guaranteed via <function>mmiowb</function> or one of the
+	<function>readX</function> functions.
+      </para>
+
+<programlisting>
+CPU A:  spin_lock_irqsave(&amp;dev_lock, flags)
+CPU A:  ...
+CPU A:  writel(newval, ring_ptr);
+CPU A:  spin_unlock_irqrestore(&amp;dev_lock, flags)
+        ...
+CPU B:  spin_lock_irqsave(&amp;dev_lock, flags)
+CPU B:  writel(newval2, ring_ptr);
+CPU B:  ...
+CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
+</programlisting>
+
+      <para>
+	In the case above, newval2 could be written to ring_ptr before
+	newval.  Fixing it is easy though:
+      </para>
+
+<programlisting>
+CPU A:  spin_lock_irqsave(&amp;dev_lock, flags)
+CPU A:  ...
+CPU A:  writel(newval, ring_ptr);
+CPU A:  mmiowb(); /* ensure no other writes beat us to the device */
+CPU A:  spin_unlock_irqrestore(&amp;dev_lock, flags)
+        ...
+CPU B:  spin_lock_irqsave(&amp;dev_lock, flags)
+CPU B:  writel(newval2, ring_ptr);
+CPU B:  ...
+CPU B:  mmiowb();
+CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
+</programlisting>
+
+      <para>
+	See tg3.c for a real world example of how to use <function>mmiowb
+	</function>
+      </para>
+
+      <para>
+	PCI ordering rules also guarantee that PIO read responses arrive
+	after any outstanding DMA writes from that bus, since for some devices
+	the result of a <function>readb</function> call may signal to the
+	driver that a DMA transaction is complete.  In many cases, however,
+	the driver may want to indicate that the next
+	<function>readb</function> call has no relation to any previous DMA
+	writes performed by the device.  The driver can use
+	<function>readb_relaxed</function> for these cases, although only
+	some platforms will honor the relaxed semantics.  Using the relaxed
+	read functions will provide significant performance benefits on
+	platforms that support it.  The qla2xxx driver provides examples
+	of how to use <function>readX_relaxed</function>.  In many cases,
+	a majority of the driver's <function>readX</function> calls can
+	safely be converted to <function>readX_relaxed</function> calls, since
+	only a few will indicate or depend on DMA completion.
+      </para>
+    </sect1>
+
+  </chapter>
+
+  <chapter id="port_space_accesses">
+    <title>Port Space Accesses</title>
+    <sect1 id="port_space_explained">
+      <title>Port Space Explained</title>
+
+      <para>
+	Another form of IO commonly supported is Port Space.  This is a
+	range of addresses separate to the normal memory address space.
+	Access to these addresses is generally not as fast as accesses
+	to the memory mapped addresses, and it also has a potentially
+	smaller address space.
+      </para>
+
+      <para>
+	Unlike memory mapped IO, no preparation is required
+	to access port space.
+      </para>
+
+    </sect1>
+    <sect1 id="accessing_port_space">
+      <title>Accessing Port Space</title>
+      <para>
+	Accesses to this space are provided through a set of functions
+	which allow 8-bit, 16-bit and 32-bit accesses; also
+	known as byte, word and long.  These functions are
+	<function>inb</function>, <function>inw</function>,
+	<function>inl</function>, <function>outb</function>,
+	<function>outw</function> and <function>outl</function>.
+      </para>
+
+      <para>
+	Some variants are provided for these functions.  Some devices
+	require that accesses to their ports are slowed down.  This
+	functionality is provided by appending a <function>_p</function>
+	to the end of the function.  There are also equivalents to memcpy.
+	The <function>ins</function> and <function>outs</function>
+	functions copy bytes, words or longs to the given port.
+      </para>
+    </sect1>
+
+  </chapter>
+
+  <chapter id="pubfunctions">
+     <title>Public Functions Provided</title>
+!Iarch/x86/include/asm/io.h
+!Elib/pci_iomap.c
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/drm.tmpl

diff --git a/linux-imx/Documentation/DocBook/drm.tmpl b/linux-imx/Documentation/DocBook/drm.tmpl
new file mode 100644
index 0000000..f9df3b8
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/drm.tmpl
@@ -0,0 +1,2540 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="drmDevelopersGuide">
+  <bookinfo>
+    <title>Linux DRM Developer's Guide</title>
+
+    <authorgroup>
+      <author>
+	<firstname>Jesse</firstname>
+	<surname>Barnes</surname>
+	<contrib>Initial version</contrib>
+	<affiliation>
+	  <orgname>Intel Corporation</orgname>
+	  <address>
+	    <email>jesse.barnes@intel.com</email>
+	  </address>
+	</affiliation>
+      </author>
+      <author>
+	<firstname>Laurent</firstname>
+	<surname>Pinchart</surname>
+	<contrib>Driver internals</contrib>
+	<affiliation>
+	  <orgname>Ideas on board SPRL</orgname>
+	  <address>
+	    <email>laurent.pinchart@ideasonboard.com</email>
+	  </address>
+	</affiliation>
+      </author>
+    </authorgroup>
+
+    <copyright>
+      <year>2008-2009</year>
+      <year>2012</year>
+      <holder>Intel Corporation</holder>
+      <holder>Laurent Pinchart</holder>
+    </copyright>
+
+    <legalnotice>
+      <para>
+	The contents of this file may be used under the terms of the GNU
+	General Public License version 2 (the "GPL") as distributed in
+	the kernel source COPYING file.
+      </para>
+    </legalnotice>
+
+    <revhistory>
+      <!-- Put document revisions here, newest first. -->
+      <revision>
+	<revnumber>1.0</revnumber>
+	<date>2012-07-13</date>
+	<authorinitials>LP</authorinitials>
+	<revremark>Added extensive documentation about driver internals.
+	</revremark>
+      </revision>
+    </revhistory>
+  </bookinfo>
+
+<toc></toc>
+
+  <!-- Introduction -->
+
+  <chapter id="drmIntroduction">
+    <title>Introduction</title>
+    <para>
+      The Linux DRM layer contains code intended to support the needs
+      of complex graphics devices, usually containing programmable
+      pipelines well suited to 3D graphics acceleration.  Graphics
+      drivers in the kernel may make use of DRM functions to make
+      tasks like memory management, interrupt handling and DMA easier,
+      and provide a uniform interface to applications.
+    </para>
+    <para>
+      A note on versions: this guide covers features found in the DRM
+      tree, including the TTM memory manager, output configuration and
+      mode setting, and the new vblank internals, in addition to all
+      the regular features found in current kernels.
+    </para>
+    <para>
+      [Insert diagram of typical DRM stack here]
+    </para>
+  </chapter>
+
+  <!-- Internals -->
+
+  <chapter id="drmInternals">
+    <title>DRM Internals</title>
+    <para>
+      This chapter documents DRM internals relevant to driver authors
+      and developers working to add support for the latest features to
+      existing drivers.
+    </para>
+    <para>
+      First, we go over some typical driver initialization
+      requirements, like setting up command buffers, creating an
+      initial output configuration, and initializing core services.
+      Subsequent sections cover core internals in more detail,
+      providing implementation notes and examples.
+    </para>
+    <para>
+      The DRM layer provides several services to graphics drivers,
+      many of them driven by the application interfaces it provides
+      through libdrm, the library that wraps most of the DRM ioctls.
+      These include vblank event handling, memory
+      management, output management, framebuffer management, command
+      submission &amp; fencing, suspend/resume support, and DMA
+      services.
+    </para>
+
+  <!-- Internals: driver init -->
+
+  <sect1>
+    <title>Driver Initialization</title>
+    <para>
+      At the core of every DRM driver is a <structname>drm_driver</structname>
+      structure. Drivers typically statically initialize a drm_driver structure,
+      and then pass it to one of the <function>drm_*_init()</function> functions
+      to register it with the DRM subsystem.
+    </para>
+    <para>
+      The <structname>drm_driver</structname> structure contains static
+      information that describes the driver and features it supports, and
+      pointers to methods that the DRM core will call to implement the DRM API.
+      We will first go through the <structname>drm_driver</structname> static
+      information fields, and will then describe individual operations in
+      details as they get used in later sections.
+    </para>
+    <sect2>
+      <title>Driver Information</title>
+      <sect3>
+        <title>Driver Features</title>
+        <para>
+          Drivers inform the DRM core about their requirements and supported
+          features by setting appropriate flags in the
+          <structfield>driver_features</structfield> field. Since those flags
+          influence the DRM core behaviour since registration time, most of them
+          must be set to registering the <structname>drm_driver</structname>
+          instance.
+        </para>
+        <synopsis>u32 driver_features;</synopsis>
+        <variablelist>
+          <title>Driver Feature Flags</title>
+          <varlistentry>
+            <term>DRIVER_USE_AGP</term>
+            <listitem><para>
+              Driver uses AGP interface, the DRM core will manage AGP resources.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_REQUIRE_AGP</term>
+            <listitem><para>
+              Driver needs AGP interface to function. AGP initialization failure
+              will become a fatal error.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_USE_MTRR</term>
+            <listitem><para>
+              Driver uses MTRR interface for mapping memory, the DRM core will
+              manage MTRR resources. Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_PCI_DMA</term>
+            <listitem><para>
+              Driver is capable of PCI DMA, mapping of PCI DMA buffers to
+              userspace will be enabled. Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_SG</term>
+            <listitem><para>
+              Driver can perform scatter/gather DMA, allocation and mapping of
+              scatter/gather buffers will be enabled. Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_HAVE_DMA</term>
+            <listitem><para>
+              Driver supports DMA, the userspace DMA API will be supported.
+              Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
+            <listitem><para>
+              DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler. The
+              DRM core will automatically register an interrupt handler when the
+              flag is set. DRIVER_IRQ_SHARED indicates whether the device &amp;
+              handler support shared IRQs (note that this is required of PCI
+              drivers).
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_IRQ_VBL</term>
+            <listitem><para>Unused. Deprecated.</para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_DMA_QUEUE</term>
+            <listitem><para>
+              Should be set if the driver queues DMA requests and completes them
+              asynchronously.  Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_FB_DMA</term>
+            <listitem><para>
+              Driver supports DMA to/from the framebuffer, mapping of frambuffer
+              DMA buffers to userspace will be supported. Deprecated.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_IRQ_VBL2</term>
+            <listitem><para>Unused. Deprecated.</para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_GEM</term>
+            <listitem><para>
+              Driver use the GEM memory manager.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_MODESET</term>
+            <listitem><para>
+              Driver supports mode setting interfaces (KMS).
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRIVER_PRIME</term>
+            <listitem><para>
+              Driver implements DRM PRIME buffer sharing.
+            </para></listitem>
+          </varlistentry>
+        </variablelist>
+      </sect3>
+      <sect3>
+        <title>Major, Minor and Patchlevel</title>
+        <synopsis>int major;
+int minor;
+int patchlevel;</synopsis>
+        <para>
+          The DRM core identifies driver versions by a major, minor and patch
+          level triplet. The information is printed to the kernel log at
+          initialization time and passed to userspace through the
+          DRM_IOCTL_VERSION ioctl.
+        </para>
+        <para>
+          The major and minor numbers are also used to verify the requested driver
+          API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes
+          between minor versions, applications can call DRM_IOCTL_SET_VERSION to
+          select a specific version of the API. If the requested major isn't equal
+          to the driver major, or the requested minor is larger than the driver
+          minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise
+          the driver's set_version() method will be called with the requested
+          version.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Name, Description and Date</title>
+        <synopsis>char *name;
+char *desc;
+char *date;</synopsis>
+        <para>
+          The driver name is printed to the kernel log at initialization time,
+          used for IRQ registration and passed to userspace through
+          DRM_IOCTL_VERSION.
+        </para>
+        <para>
+          The driver description is a purely informative string passed to
+          userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by
+          the kernel.
+        </para>
+        <para>
+          The driver date, formatted as YYYYMMDD, is meant to identify the date of
+          the latest modification to the driver. However, as most drivers fail to
+          update it, its value is mostly useless. The DRM core prints it to the
+          kernel log at initialization time and passes it to userspace through the
+          DRM_IOCTL_VERSION ioctl.
+        </para>
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>Driver Load</title>
+      <para>
+        The <methodname>load</methodname> method is the driver and device
+        initialization entry point. The method is responsible for allocating and
+        initializing driver private data, specifying supported performance
+        counters, performing resource allocation and mapping (e.g. acquiring
+        clocks, mapping registers or allocating command buffers), initializing
+        the memory manager (<xref linkend="drm-memory-management"/>), installing
+        the IRQ handler (<xref linkend="drm-irq-registration"/>), setting up
+        vertical blanking handling (<xref linkend="drm-vertical-blank"/>), mode
+	setting (<xref linkend="drm-mode-setting"/>) and initial output
+	configuration (<xref linkend="drm-kms-init"/>).
+      </para>
+      <note><para>
+        If compatibility is a concern (e.g. with drivers converted over from
+        User Mode Setting to Kernel Mode Setting), care must be taken to prevent
+        device initialization and control that is incompatible with currently
+        active userspace drivers. For instance, if user level mode setting
+        drivers are in use, it would be problematic to perform output discovery
+        &amp; configuration at load time. Likewise, if user-level drivers
+        unaware of memory management are in use, memory management and command
+        buffer setup may need to be omitted. These requirements are
+        driver-specific, and care needs to be taken to keep both old and new
+        applications and libraries working.
+      </para></note>
+      <synopsis>int (*load) (struct drm_device *, unsigned long flags);</synopsis>
+      <para>
+        The method takes two arguments, a pointer to the newly created
+	<structname>drm_device</structname> and flags. The flags are used to
+	pass the <structfield>driver_data</structfield> field of the device id
+	corresponding to the device passed to <function>drm_*_init()</function>.
+	Only PCI devices currently use this, USB and platform DRM drivers have
+	their <methodname>load</methodname> method called with flags to 0.
+      </para>
+      <sect3>
+        <title>Driver Private &amp; Performance Counters</title>
+        <para>
+          The driver private hangs off the main
+          <structname>drm_device</structname> structure and can be used for
+          tracking various device-specific bits of information, like register
+          offsets, command buffer status, register state for suspend/resume, etc.
+          At load time, a driver may simply allocate one and set
+          <structname>drm_device</structname>.<structfield>dev_priv</structfield>
+          appropriately; it should be freed and
+          <structname>drm_device</structname>.<structfield>dev_priv</structfield>
+          set to NULL when the driver is unloaded.
+        </para>
+        <para>
+          DRM supports several counters which were used for rough performance
+          characterization. This stat counter system is deprecated and should not
+          be used. If performance monitoring is desired, the developer should
+          investigate and potentially enhance the kernel perf and tracing
+          infrastructure to export GPU related performance information for
+          consumption by performance monitoring tools and applications.
+        </para>
+      </sect3>
+      <sect3 id="drm-irq-registration">
+        <title>IRQ Registration</title>
+        <para>
+          The DRM core tries to facilitate IRQ handler registration and
+          unregistration by providing <function>drm_irq_install</function> and
+          <function>drm_irq_uninstall</function> functions. Those functions only
+          support a single interrupt per device.
+        </para>
+  <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
+        <para>
+          Both functions get the device IRQ by calling
+          <function>drm_dev_to_irq</function>. This inline function will call a
+          bus-specific operation to retrieve the IRQ number. For platform devices,
+          <function>platform_get_irq</function>(..., 0) is used to retrieve the
+          IRQ number.
+        </para>
+        <para>
+          <function>drm_irq_install</function> starts by calling the
+          <methodname>irq_preinstall</methodname> driver operation. The operation
+          is optional and must make sure that the interrupt will not get fired by
+          clearing all pending interrupt flags or disabling the interrupt.
+        </para>
+        <para>
+          The IRQ will then be requested by a call to
+          <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver
+          feature flag is set, a shared (IRQF_SHARED) IRQ handler will be
+          requested.
+        </para>
+        <para>
+          The IRQ handler function must be provided as the mandatory irq_handler
+          driver operation. It will get passed directly to
+          <function>request_irq</function> and thus has the same prototype as all
+          IRQ handlers. It will get called with a pointer to the DRM device as the
+          second argument.
+        </para>
+        <para>
+          Finally the function calls the optional
+          <methodname>irq_postinstall</methodname> driver operation. The operation
+          usually enables interrupts (excluding the vblank interrupt, which is
+          enabled separately), but drivers may choose to enable/disable interrupts
+          at a different time.
+        </para>
+        <para>
+          <function>drm_irq_uninstall</function> is similarly used to uninstall an
+          IRQ handler. It starts by waking up all processes waiting on a vblank
+          interrupt to make sure they don't hang, and then calls the optional
+          <methodname>irq_uninstall</methodname> driver operation. The operation
+          must disable all hardware interrupts. Finally the function frees the IRQ
+          by calling <function>free_irq</function>.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Memory Manager Initialization</title>
+        <para>
+          Every DRM driver requires a memory manager which must be initialized at
+          load time. DRM currently contains two memory managers, the Translation
+          Table Manager (TTM) and the Graphics Execution Manager (GEM).
+          This document describes the use of the GEM memory manager only. See
+          <xref linkend="drm-memory-management"/> for details.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Miscellaneous Device Configuration</title>
+        <para>
+          Another task that may be necessary for PCI devices during configuration
+          is mapping the video BIOS. On many devices, the VBIOS describes device
+          configuration, LCD panel timings (if any), and contains flags indicating
+          device state. Mapping the BIOS can be done using the pci_map_rom() call,
+          a convenience function that takes care of mapping the actual ROM,
+          whether it has been shadowed into memory (typically at address 0xc0000)
+          or exists on the PCI device in the ROM BAR. Note that after the ROM has
+          been mapped and any necessary information has been extracted, it should
+          be unmapped; on many devices, the ROM address decoder is shared with
+          other BARs, so leaving it mapped could cause undesired behaviour like
+          hangs or memory corruption.
+  <!--!Fdrivers/pci/rom.c pci_map_rom-->
+        </para>
+      </sect3>
+    </sect2>
+  </sect1>
+
+  <!-- Internals: memory management -->
+
+  <sect1 id="drm-memory-management">
+    <title>Memory management</title>
+    <para>
+      Modern Linux systems require large amount of graphics memory to store
+      frame buffers, textures, vertices and other graphics-related data. Given
+      the very dynamic nature of many of that data, managing graphics memory
+      efficiently is thus crucial for the graphics stack and plays a central
+      role in the DRM infrastructure.
+    </para>
+    <para>
+      The DRM core includes two memory managers, namely Translation Table Maps
+      (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory
+      manager to be developed and tried to be a one-size-fits-them all
+      solution. It provides a single userspace API to accomodate the need of
+      all hardware, supporting both Unified Memory Architecture (UMA) devices
+      and devices with dedicated video RAM (i.e. most discrete video cards).
+      This resulted in a large, complex piece of code that turned out to be
+      hard to use for driver development.
+    </para>
+    <para>
+      GEM started as an Intel-sponsored project in reaction to TTM's
+      complexity. Its design philosophy is completely different: instead of
+      providing a solution to every graphics memory-related problems, GEM
+      identified common code between drivers and created a support library to
+      share it. GEM has simpler initialization and execution requirements than
+      TTM, but has no video RAM management capabitilies and is thus limited to
+      UMA devices.
+    </para>
+    <sect2>
+      <title>The Translation Table Manager (TTM)</title>
+      <para>
+	TTM design background and information belongs here.
+      </para>
+      <sect3>
+	<title>TTM initialization</title>
+        <warning><para>This section is outdated.</para></warning>
+        <para>
+          Drivers wishing to support TTM must fill out a drm_bo_driver
+          structure. The structure contains several fields with function
+          pointers for initializing the TTM, allocating and freeing memory,
+          waiting for command completion and fence synchronization, and memory
+          migration. See the radeon_ttm.c file for an example of usage.
+	</para>
+	<para>
+	  The ttm_global_reference structure is made up of several fields:
+	</para>
+	<programlisting>
+	  struct ttm_global_reference {
+	  	enum ttm_global_types global_type;
+	  	size_t size;
+	  	void *object;
+	  	int (*init) (struct ttm_global_reference *);
+	  	void (*release) (struct ttm_global_reference *);
+	  };
+	</programlisting>
+	<para>
+	  There should be one global reference structure for your memory
+	  manager as a whole, and there will be others for each object
+	  created by the memory manager at runtime.  Your global TTM should
+	  have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
+	  object should be sizeof(struct ttm_mem_global), and the init and
+	  release hooks should point at your driver-specific init and
+	  release routines, which probably eventually call
+	  ttm_mem_global_init and ttm_mem_global_release, respectively.
+	</para>
+	<para>
+	  Once your global TTM accounting structure is set up and initialized
+	  by calling ttm_global_item_ref() on it,
+	  you need to create a buffer object TTM to
+	  provide a pool for buffer object allocation by clients and the
+	  kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
+	  and its size should be sizeof(struct ttm_bo_global).  Again,
+	  driver-specific init and release functions may be provided,
+	  likely eventually calling ttm_bo_global_init() and
+	  ttm_bo_global_release(), respectively.  Also, like the previous
+	  object, ttm_global_item_ref() is used to create an initial reference
+	  count for the TTM, which will call your initialization function.
+	</para>
+      </sect3>
+    </sect2>
+    <sect2 id="drm-gem">
+      <title>The Graphics Execution Manager (GEM)</title>
+      <para>
+        The GEM design approach has resulted in a memory manager that doesn't
+        provide full coverage of all (or even all common) use cases in its
+        userspace or kernel API. GEM exposes a set of standard memory-related
+        operations to userspace and a set of helper functions to drivers, and let
+        drivers implement hardware-specific operations with their own private API.
+      </para>
+      <para>
+        The GEM userspace API is described in the
+        <ulink url="http://lwn.net/Articles/283798/"><citetitle>GEM - the Graphics
+        Execution Manager</citetitle></ulink> article on LWN. While slightly
+        outdated, the document provides a good overview of the GEM API principles.
+        Buffer allocation and read and write operations, described as part of the
+        common GEM API, are currently implemented using driver-specific ioctls.
+      </para>
+      <para>
+        GEM is data-agnostic. It manages abstract buffer objects without knowing
+        what individual buffers contain. APIs that require knowledge of buffer
+        contents or purpose, such as buffer allocation or synchronization
+        primitives, are thus outside of the scope of GEM and must be implemented
+        using driver-specific ioctls.
+      </para>
+      <para>
+	On a fundamental level, GEM involves several operations:
+	<itemizedlist>
+	  <listitem>Memory allocation and freeing</listitem>
+	  <listitem>Command execution</listitem>
+	  <listitem>Aperture management at command execution time</listitem>
+	</itemizedlist>
+	Buffer object allocation is relatively straightforward and largely
+        provided by Linux's shmem layer, which provides memory to back each
+        object.
+      </para>
+      <para>
+        Device-specific operations, such as command execution, pinning, buffer
+	read &amp; write, mapping, and domain ownership transfers are left to
+        driver-specific ioctls.
+      </para>
+      <sect3>
+        <title>GEM Initialization</title>
+        <para>
+          Drivers that use GEM must set the DRIVER_GEM bit in the struct
+          <structname>drm_driver</structname>
+          <structfield>driver_features</structfield> field. The DRM core will
+          then automatically initialize the GEM core before calling the
+          <methodname>load</methodname> operation. Behind the scene, this will
+          create a DRM Memory Manager object which provides an address space
+          pool for object allocation.
+        </para>
+        <para>
+          In a KMS configuration, drivers need to allocate and initialize a
+          command ring buffer following core GEM initialization if required by
+          the hardware. UMA devices usually have what is called a "stolen"
+          memory region, which provides space for the initial framebuffer and
+          large, contiguous memory regions required by the device. This space is
+          typically not managed by GEM, and must be initialized separately into
+          its own DRM MM object.
+        </para>
+      </sect3>
+      <sect3>
+        <title>GEM Objects Creation</title>
+        <para>
+          GEM splits creation of GEM objects and allocation of the memory that
+          backs them in two distinct operations.
+        </para>
+        <para>
+          GEM objects are represented by an instance of struct
+          <structname>drm_gem_object</structname>. Drivers usually need to extend
+          GEM objects with private information and thus create a driver-specific
+          GEM object structure type that embeds an instance of struct
+          <structname>drm_gem_object</structname>.
+        </para>
+        <para>
+          To create a GEM object, a driver allocates memory for an instance of its
+          specific GEM object type and initializes the embedded struct
+          <structname>drm_gem_object</structname> with a call to
+          <function>drm_gem_object_init</function>. The function takes a pointer to
+          the DRM device, a pointer to the GEM object and the buffer object size
+          in bytes.
+        </para>
+        <para>
+          GEM uses shmem to allocate anonymous pageable memory.
+          <function>drm_gem_object_init</function> will create an shmfs file of
+          the requested size and store it into the struct
+          <structname>drm_gem_object</structname> <structfield>filp</structfield>
+          field. The memory is used as either main storage for the object when the
+          graphics hardware uses system memory directly or as a backing store
+          otherwise.
+        </para>
+        <para>
+          Drivers are responsible for the actual physical pages allocation by
+          calling <function>shmem_read_mapping_page_gfp</function> for each page.
+          Note that they can decide to allocate pages when initializing the GEM
+          object, or to delay allocation until the memory is needed (for instance
+          when a page fault occurs as a result of a userspace memory access or
+          when the driver needs to start a DMA transfer involving the memory).
+        </para>
+        <para>
+          Anonymous pageable memory allocation is not always desired, for instance
+          when the hardware requires physically contiguous system memory as is
+          often the case in embedded devices. Drivers can create GEM objects with
+          no shmfs backing (called private GEM objects) by initializing them with
+          a call to <function>drm_gem_private_object_init</function> instead of
+          <function>drm_gem_object_init</function>. Storage for private GEM
+          objects must be managed by drivers.
+        </para>
+        <para>
+          Drivers that do not need to extend GEM objects with private information
+          can call the <function>drm_gem_object_alloc</function> function to
+          allocate and initialize a struct <structname>drm_gem_object</structname>
+          instance. The GEM core will call the optional driver
+          <methodname>gem_init_object</methodname> operation after initializing
+          the GEM object with <function>drm_gem_object_init</function>.
+          <synopsis>int (*gem_init_object) (struct drm_gem_object *obj);</synopsis>
+        </para>
+        <para>
+          No alloc-and-init function exists for private GEM objects.
+        </para>
+      </sect3>
+      <sect3>
+        <title>GEM Objects Lifetime</title>
+        <para>
+          All GEM objects are reference-counted by the GEM core. References can be
+          acquired and release by <function>calling drm_gem_object_reference</function>
+          and <function>drm_gem_object_unreference</function> respectively. The
+          caller must hold the <structname>drm_device</structname>
+          <structfield>struct_mutex</structfield> lock. As a convenience, GEM
+          provides the <function>drm_gem_object_reference_unlocked</function> and
+          <function>drm_gem_object_unreference_unlocked</function> functions that
+          can be called without holding the lock.
+        </para>
+        <para>
+          When the last reference to a GEM object is released the GEM core calls
+          the <structname>drm_driver</structname>
+          <methodname>gem_free_object</methodname> operation. That operation is
+          mandatory for GEM-enabled drivers and must free the GEM object and all
+          associated resources.
+        </para>
+        <para>
+          <synopsis>void (*gem_free_object) (struct drm_gem_object *obj);</synopsis>
+          Drivers are responsible for freeing all GEM object resources, including
+          the resources created by the GEM core. If an mmap offset has been
+          created for the object (in which case
+          <structname>drm_gem_object</structname>::<structfield>map_list</structfield>::<structfield>map</structfield>
+          is not NULL) it must be freed by a call to
+          <function>drm_gem_free_mmap_offset</function>. The shmfs backing store
+          must be released by calling <function>drm_gem_object_release</function>
+          (that function can safely be called if no shmfs backing store has been
+          created).
+        </para>
+      </sect3>
+      <sect3>
+        <title>GEM Objects Naming</title>
+        <para>
+          Communication between userspace and the kernel refers to GEM objects
+          using local handles, global names or, more recently, file descriptors.
+          All of those are 32-bit integer values; the usual Linux kernel limits
+          apply to the file descriptors.
+        </para>
+        <para>
+          GEM handles are local to a DRM file. Applications get a handle to a GEM
+          object through a driver-specific ioctl, and can use that handle to refer
+          to the GEM object in other standard or driver-specific ioctls. Closing a
+          DRM file handle frees all its GEM handles and dereferences the
+          associated GEM objects.
+        </para>
+        <para>
+          To create a handle for a GEM object drivers call
+          <function>drm_gem_handle_create</function>. The function takes a pointer
+          to the DRM file and the GEM object and returns a locally unique handle.
+          When the handle is no longer needed drivers delete it with a call to
+          <function>drm_gem_handle_delete</function>. Finally the GEM object
+          associated with a handle can be retrieved by a call to
+          <function>drm_gem_object_lookup</function>.
+        </para>
+        <para>
+          Handles don't take ownership of GEM objects, they only take a reference
+          to the object that will be dropped when the handle is destroyed. To
+          avoid leaking GEM objects, drivers must make sure they drop the
+          reference(s) they own (such as the initial reference taken at object
+          creation time) as appropriate, without any special consideration for the
+          handle. For example, in the particular case of combined GEM object and
+          handle creation in the implementation of the
+          <methodname>dumb_create</methodname> operation, drivers must drop the
+          initial reference to the GEM object before returning the handle.
+        </para>
+        <para>
+          GEM names are similar in purpose to handles but are not local to DRM
+          files. They can be passed between processes to reference a GEM object
+          globally. Names can't be used directly to refer to objects in the DRM
+          API, applications must convert handles to names and names to handles
+          using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls
+          respectively. The conversion is handled by the DRM core without any
+          driver-specific support.
+        </para>
+        <para>
+          Similar to global names, GEM file descriptors are also used to share GEM
+          objects across processes. They offer additional security: as file
+          descriptors must be explictly sent over UNIX domain sockets to be shared
+          between applications, they can't be guessed like the globally unique GEM
+          names.
+        </para>
+        <para>
+          Drivers that support GEM file descriptors, also known as the DRM PRIME
+          API, must set the DRIVER_PRIME bit in the struct
+          <structname>drm_driver</structname>
+          <structfield>driver_features</structfield> field, and implement the
+          <methodname>prime_handle_to_fd</methodname> and
+          <methodname>prime_fd_to_handle</methodname> operations.
+        </para>
+        <para>
+          <synopsis>int (*prime_handle_to_fd)(struct drm_device *dev,
+                            struct drm_file *file_priv, uint32_t handle,
+                            uint32_t flags, int *prime_fd);
+  int (*prime_fd_to_handle)(struct drm_device *dev,
+                            struct drm_file *file_priv, int prime_fd,
+                            uint32_t *handle);</synopsis>
+          Those two operations convert a handle to a PRIME file descriptor and
+          vice versa. Drivers must use the kernel dma-buf buffer sharing framework
+          to manage the PRIME file descriptors.
+        </para>
+        <para>
+          While non-GEM drivers must implement the operations themselves, GEM
+          drivers must use the <function>drm_gem_prime_handle_to_fd</function>
+          and <function>drm_gem_prime_fd_to_handle</function> helper functions.
+          Those helpers rely on the driver
+          <methodname>gem_prime_export</methodname> and
+          <methodname>gem_prime_import</methodname> operations to create a dma-buf
+          instance from a GEM object (dma-buf exporter role) and to create a GEM
+          object from a dma-buf instance (dma-buf importer role).
+        </para>
+        <para>
+          <synopsis>struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
+                                       struct drm_gem_object *obj,
+                                       int flags);
+  struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
+                                              struct dma_buf *dma_buf);</synopsis>
+          These two operations are mandatory for GEM drivers that support DRM
+          PRIME.
+        </para>
+        <sect4>
+          <title>DRM PRIME Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
+        </sect4>
+      </sect3>
+      <sect3 id="drm-gem-objects-mapping">
+        <title>GEM Objects Mapping</title>
+        <para>
+          Because mapping operations are fairly heavyweight GEM favours
+          read/write-like access to buffers, implemented through driver-specific
+          ioctls, over mapping buffers to userspace. However, when random access
+          to the buffer is needed (to perform software rendering for instance),
+          direct access to the object can be more efficient.
+        </para>
+        <para>
+          The mmap system call can't be used directly to map GEM objects, as they
+          don't have their own file handle. Two alternative methods currently
+          co-exist to map GEM objects to userspace. The first method uses a
+          driver-specific ioctl to perform the mapping operation, calling
+          <function>do_mmap</function> under the hood. This is often considered
+          dubious, seems to be discouraged for new GEM-enabled drivers, and will
+          thus not be described here.
+        </para>
+        <para>
+          The second method uses the mmap system call on the DRM file handle.
+          <synopsis>void *mmap(void *addr, size_t length, int prot, int flags, int fd,
+             off_t offset);</synopsis>
+          DRM identifies the GEM object to be mapped by a fake offset passed
+          through the mmap offset argument. Prior to being mapped, a GEM object
+          must thus be associated with a fake offset. To do so, drivers must call
+          <function>drm_gem_create_mmap_offset</function> on the object. The
+          function allocates a fake offset range from a pool and stores the
+          offset divided by PAGE_SIZE in
+          <literal>obj-&gt;map_list.hash.key</literal>. Care must be taken not to
+          call <function>drm_gem_create_mmap_offset</function> if a fake offset
+          has already been allocated for the object. This can be tested by
+          <literal>obj-&gt;map_list.map</literal> being non-NULL.
+        </para>
+        <para>
+          Once allocated, the fake offset value
+          (<literal>obj-&gt;map_list.hash.key &lt;&lt; PAGE_SHIFT</literal>)
+          must be passed to the application in a driver-specific way and can then
+          be used as the mmap offset argument.
+        </para>
+        <para>
+          The GEM core provides a helper method <function>drm_gem_mmap</function>
+          to handle object mapping. The method can be set directly as the mmap
+          file operation handler. It will look up the GEM object based on the
+          offset value and set the VMA operations to the
+          <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield>
+          field. Note that <function>drm_gem_mmap</function> doesn't map memory to
+          userspace, but relies on the driver-provided fault handler to map pages
+          individually.
+        </para>
+        <para>
+          To use <function>drm_gem_mmap</function>, drivers must fill the struct
+          <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield>
+          field with a pointer to VM operations.
+        </para>
+        <para>
+          <synopsis>struct vm_operations_struct *gem_vm_ops
+
+  struct vm_operations_struct {
+          void (*open)(struct vm_area_struct * area);
+          void (*close)(struct vm_area_struct * area);
+          int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
+  };</synopsis>
+        </para>
+        <para>
+          The <methodname>open</methodname> and <methodname>close</methodname>
+          operations must update the GEM object reference count. Drivers can use
+          the <function>drm_gem_vm_open</function> and
+          <function>drm_gem_vm_close</function> helper functions directly as open
+          and close handlers.
+        </para>
+        <para>
+          The fault operation handler is responsible for mapping individual pages
+          to userspace when a page fault occurs. Depending on the memory
+          allocation scheme, drivers can allocate pages at fault time, or can
+          decide to allocate memory for the GEM object at the time the object is
+          created.
+        </para>
+        <para>
+          Drivers that want to map the GEM object upfront instead of handling page
+          faults can implement their own mmap file operation handler.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Dumb GEM Objects</title>
+        <para>
+          The GEM API doesn't standardize GEM objects creation and leaves it to
+          driver-specific ioctls. While not an issue for full-fledged graphics
+          stacks that include device-specific userspace components (in libdrm for
+          instance), this limit makes DRM-based early boot graphics unnecessarily
+          complex.
+        </para>
+        <para>
+          Dumb GEM objects partly alleviate the problem by providing a standard
+          API to create dumb buffers suitable for scanout, which can then be used
+          to create KMS frame buffers.
+        </para>
+        <para>
+          To support dumb GEM objects drivers must implement the
+          <methodname>dumb_create</methodname>,
+          <methodname>dumb_destroy</methodname> and
+          <methodname>dumb_map_offset</methodname> operations.
+        </para>
+        <itemizedlist>
+          <listitem>
+            <synopsis>int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev,
+                     struct drm_mode_create_dumb *args);</synopsis>
+            <para>
+              The <methodname>dumb_create</methodname> operation creates a GEM
+              object suitable for scanout based on the width, height and depth
+              from the struct <structname>drm_mode_create_dumb</structname>
+              argument. It fills the argument's <structfield>handle</structfield>,
+              <structfield>pitch</structfield> and <structfield>size</structfield>
+              fields with a handle for the newly created GEM object and its line
+              pitch and size in bytes.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev,
+                      uint32_t handle);</synopsis>
+            <para>
+              The <methodname>dumb_destroy</methodname> operation destroys a dumb
+              GEM object created by <methodname>dumb_create</methodname>.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev,
+                         uint32_t handle, uint64_t *offset);</synopsis>
+            <para>
+              The <methodname>dumb_map_offset</methodname> operation associates an
+              mmap fake offset with the GEM object given by the handle and returns
+              it. Drivers must use the
+              <function>drm_gem_create_mmap_offset</function> function to
+              associate the fake offset as described in
+              <xref linkend="drm-gem-objects-mapping"/>.
+            </para>
+          </listitem>
+        </itemizedlist>
+      </sect3>
+      <sect3>
+        <title>Memory Coherency</title>
+        <para>
+          When mapped to the device or used in a command buffer, backing pages
+          for an object are flushed to memory and marked write combined so as to
+          be coherent with the GPU. Likewise, if the CPU accesses an object
+          after the GPU has finished rendering to the object, then the object
+          must be made coherent with the CPU's view of memory, usually involving
+          GPU cache flushing of various kinds. This core CPU&lt;-&gt;GPU
+          coherency management is provided by a device-specific ioctl, which
+          evaluates an object's current domain and performs any necessary
+          flushing or synchronization to put the object into the desired
+          coherency domain (note that the object may be busy, i.e. an active
+          render target; in that case, setting the domain blocks the client and
+          waits for rendering to complete before performing any necessary
+          flushing operations).
+        </para>
+      </sect3>
+      <sect3>
+        <title>Command Execution</title>
+        <para>
+	  Perhaps the most important GEM function for GPU devices is providing a
+          command execution interface to clients. Client programs construct
+          command buffers containing references to previously allocated memory
+          objects, and then submit them to GEM. At that point, GEM takes care to
+          bind all the objects into the GTT, execute the buffer, and provide
+          necessary synchronization between clients accessing the same buffers.
+          This often involves evicting some objects from the GTT and re-binding
+          others (a fairly expensive operation), and providing relocation
+          support which hides fixed GTT offsets from clients. Clients must take
+          care not to submit command buffers that reference more objects than
+          can fit in the GTT; otherwise, GEM will reject them and no rendering
+          will occur. Similarly, if several objects in the buffer require fence
+          registers to be allocated for correct rendering (e.g. 2D blits on
+          pre-965 chips), care must be taken not to require more fence registers
+          than are available to the client. Such resource management should be
+          abstracted from the client in libdrm.
+        </para>
+      </sect3>
+    </sect2>
+  </sect1>
+
+  <!-- Internals: mode setting -->
+
+  <sect1 id="drm-mode-setting">
+    <title>Mode Setting</title>
+    <para>
+      Drivers must initialize the mode setting core by calling
+      <function>drm_mode_config_init</function> on the DRM device. The function
+      initializes the <structname>drm_device</structname>
+      <structfield>mode_config</structfield> field and never fails. Once done,
+      mode configuration must be setup by initializing the following fields.
+    </para>
+    <itemizedlist>
+      <listitem>
+        <synopsis>int min_width, min_height;
+int max_width, max_height;</synopsis>
+        <para>
+	  Minimum and maximum width and height of the frame buffers in pixel
+	  units.
+	</para>
+      </listitem>
+      <listitem>
+        <synopsis>struct drm_mode_config_funcs *funcs;</synopsis>
+	<para>Mode setting functions.</para>
+      </listitem>
+    </itemizedlist>
+    <sect2>
+      <title>Frame Buffer Creation</title>
+      <synopsis>struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
+				     struct drm_file *file_priv,
+				     struct drm_mode_fb_cmd2 *mode_cmd);</synopsis>
+      <para>
+        Frame buffers are abstract memory objects that provide a source of
+        pixels to scanout to a CRTC. Applications explicitly request the
+        creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and
+        receive an opaque handle that can be passed to the KMS CRTC control,
+        plane configuration and page flip functions.
+      </para>
+      <para>
+        Frame buffers rely on the underneath memory manager for low-level memory
+        operations. When creating a frame buffer applications pass a memory
+        handle (or a list of memory handles for multi-planar formats) through
+        the <parameter>drm_mode_fb_cmd2</parameter> argument. This document
+        assumes that the driver uses GEM, those handles thus reference GEM
+        objects.
+      </para>
+      <para>
+        Drivers must first validate the requested frame buffer parameters passed
+        through the mode_cmd argument. In particular this is where invalid
+        sizes, pixel formats or pitches can be caught.
+      </para>
+      <para>
+        If the parameters are deemed valid, drivers then create, initialize and
+        return an instance of struct <structname>drm_framebuffer</structname>.
+        If desired the instance can be embedded in a larger driver-specific
+	structure. Drivers must fill its <structfield>width</structfield>,
+	<structfield>height</structfield>, <structfield>pitches</structfield>,
+        <structfield>offsets</structfield>, <structfield>depth</structfield>,
+        <structfield>bits_per_pixel</structfield> and
+        <structfield>pixel_format</structfield> fields from the values passed
+        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
+        should call the <function>drm_helper_mode_fill_fb_struct</function>
+        helper function to do so.
+      </para>
+
+      <para>
+	The initailization of the new framebuffer instance is finalized with a
+	call to <function>drm_framebuffer_init</function> which takes a pointer
+	to DRM frame buffer operations (struct
+	<structname>drm_framebuffer_funcs</structname>). Note that this function
+	publishes the framebuffer and so from this point on it can be accessed
+	concurrently from other threads. Hence it must be the last step in the
+	driver's framebuffer initialization sequence. Frame buffer operations
+	are
+        <itemizedlist>
+          <listitem>
+            <synopsis>int (*create_handle)(struct drm_framebuffer *fb,
+		     struct drm_file *file_priv, unsigned int *handle);</synopsis>
+            <para>
+              Create a handle to the frame buffer underlying memory object. If
+              the frame buffer uses a multi-plane format, the handle will
+              reference the memory object associated with the first plane.
+            </para>
+            <para>
+              Drivers call <function>drm_gem_handle_create</function> to create
+              the handle.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>void (*destroy)(struct drm_framebuffer *framebuffer);</synopsis>
+            <para>
+              Destroy the frame buffer object and frees all associated
+              resources. Drivers must call
+              <function>drm_framebuffer_cleanup</function> to free resources
+              allocated by the DRM core for the frame buffer object, and must
+              make sure to unreference all memory objects associated with the
+              frame buffer. Handles created by the
+              <methodname>create_handle</methodname> operation are released by
+              the DRM core.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>int (*dirty)(struct drm_framebuffer *framebuffer,
+	     struct drm_file *file_priv, unsigned flags, unsigned color,
+	     struct drm_clip_rect *clips, unsigned num_clips);</synopsis>
+            <para>
+              This optional operation notifies the driver that a region of the
+              frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB
+              ioctl call.
+            </para>
+          </listitem>
+        </itemizedlist>
+      </para>
+      <para>
+	The lifetime of a drm framebuffer is controlled with a reference count,
+	drivers can grab additional references with
+	<function>drm_framebuffer_reference</function> </para> and drop them
+	again with <function>drm_framebuffer_unreference</function>. For
+	driver-private framebuffers for which the last reference is never
+	dropped (e.g. for the fbdev framebuffer when the struct
+	<structname>drm_framebuffer</structname> is embedded into the fbdev
+	helper struct) drivers can manually clean up a framebuffer at module
+	unload time with
+	<function>drm_framebuffer_unregister_private</function>.
+    </sect2>
+    <sect2>
+      <title>Output Polling</title>
+      <synopsis>void (*output_poll_changed)(struct drm_device *dev);</synopsis>
+      <para>
+        This operation notifies the driver that the status of one or more
+        connectors has changed. Drivers that use the fb helper can just call the
+        <function>drm_fb_helper_hotplug_event</function> function to handle this
+        operation.
+      </para>
+    </sect2>
+    <sect2>
+      <title>Locking</title>
+      <para>
+        Beside some lookup structures with their own locking (which is hidden
+	behind the interface functions) most of the modeset state is protected
+	by the <code>dev-&lt;mode_config.lock</code> mutex and additionally
+	per-crtc locks to allow cursor updates, pageflips and similar operations
+	to occur concurrently with background tasks like output detection.
+	Operations which cross domains like a full modeset always grab all
+	locks. Drivers there need to protect resources shared between crtcs with
+	additional locking. They also need to be careful to always grab the
+	relevant crtc locks if a modset functions touches crtc state, e.g. for
+	load detection (which does only grab the <code>mode_config.lock</code>
+	to allow concurrent screen updates on live crtcs).
+      </para>
+    </sect2>
+  </sect1>
+
+  <!-- Internals: kms initialization and cleanup -->
+
+  <sect1 id="drm-kms-init">
+    <title>KMS Initialization and Cleanup</title>
+    <para>
+      A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders
+      and connectors. KMS drivers must thus create and initialize all those
+      objects at load time after initializing mode setting.
+    </para>
+    <sect2>
+      <title>CRTCs (struct <structname>drm_crtc</structname>)</title>
+      <para>
+        A CRTC is an abstraction representing a part of the chip that contains a
+	pointer to a scanout buffer. Therefore, the number of CRTCs available
+	determines how many independent scanout buffers can be active at any
+	given time. The CRTC structure contains several fields to support this:
+	a pointer to some video memory (abstracted as a frame buffer object), a
+	display mode, and an (x, y) offset into the video memory to support
+	panning or configurations where one piece of video memory spans multiple
+	CRTCs.
+      </para>
+      <sect3>
+        <title>CRTC Initialization</title>
+        <para>
+          A KMS device must create and register at least one struct
+          <structname>drm_crtc</structname> instance. The instance is allocated
+          and zeroed by the driver, possibly as part of a larger structure, and
+          registered with a call to <function>drm_crtc_init</function> with a
+          pointer to CRTC functions.
+        </para>
+      </sect3>
+      <sect3>
+        <title>CRTC Operations</title>
+        <sect4>
+          <title>Set Configuration</title>
+          <synopsis>int (*set_config)(struct drm_mode_set *set);</synopsis>
+          <para>
+            Apply a new CRTC configuration to the device. The configuration
+            specifies a CRTC, a frame buffer to scan out from, a (x,y) position in
+            the frame buffer, a display mode and an array of connectors to drive
+            with the CRTC if possible.
+          </para>
+          <para>
+            If the frame buffer specified in the configuration is NULL, the driver
+            must detach all encoders connected to the CRTC and all connectors
+            attached to those encoders and disable them.
+          </para>
+          <para>
+            This operation is called with the mode config lock held.
+          </para>
+          <note><para>
+            FIXME: How should set_config interact with DPMS? If the CRTC is
+            suspended, should it be resumed?
+          </para></note>
+        </sect4>
+        <sect4>
+          <title>Page Flipping</title>
+          <synopsis>int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+                   struct drm_pending_vblank_event *event);</synopsis>
+          <para>
+            Schedule a page flip to the given frame buffer for the CRTC. This
+            operation is called with the mode config mutex held.
+          </para>
+          <para>
+            Page flipping is a synchronization mechanism that replaces the frame
+            buffer being scanned out by the CRTC with a new frame buffer during
+            vertical blanking, avoiding tearing. When an application requests a page
+            flip the DRM core verifies that the new frame buffer is large enough to
+            be scanned out by  the CRTC in the currently configured mode and then
+            calls the CRTC <methodname>page_flip</methodname> operation with a
+            pointer to the new frame buffer.
+          </para>
+          <para>
+            The <methodname>page_flip</methodname> operation schedules a page flip.
+            Once any pending rendering targetting the new frame buffer has
+            completed, the CRTC will be reprogrammed to display that frame buffer
+            after the next vertical refresh. The operation must return immediately
+            without waiting for rendering or page flip to complete and must block
+            any new rendering to the frame buffer until the page flip completes.
+          </para>
+          <para>
+            If a page flip can be successfully scheduled the driver must set the
+            <code>drm_crtc-&lt;fb</code> field to the new framebuffer pointed to
+            by <code>fb</code>. This is important so that the reference counting
+            on framebuffers stays balanced.
+          </para>
+          <para>
+            If a page flip is already pending, the
+            <methodname>page_flip</methodname> operation must return
+            -<errorname>EBUSY</errorname>.
+          </para>
+          <para>
+            To synchronize page flip to vertical blanking the driver will likely
+            need to enable vertical blanking interrupts. It should call
+            <function>drm_vblank_get</function> for that purpose, and call
+            <function>drm_vblank_put</function> after the page flip completes.
+          </para>
+          <para>
+            If the application has requested to be notified when page flip completes
+            the <methodname>page_flip</methodname> operation will be called with a
+            non-NULL <parameter>event</parameter> argument pointing to a
+            <structname>drm_pending_vblank_event</structname> instance. Upon page
+            flip completion the driver must call <methodname>drm_send_vblank_event</methodname>
+            to fill in the event and send to wake up any waiting processes.
+            This can be performed with
+            <programlisting><![CDATA[
+            spin_lock_irqsave(&dev->event_lock, flags);
+            ...
+            drm_send_vblank_event(dev, pipe, event);
+            spin_unlock_irqrestore(&dev->event_lock, flags);
+            ]]></programlisting>
+          </para>
+          <note><para>
+            FIXME: Could drivers that don't need to wait for rendering to complete
+            just add the event to <literal>dev-&gt;vblank_event_list</literal> and
+            let the DRM core handle everything, as for "normal" vertical blanking
+            events?
+          </para></note>
+          <para>
+            While waiting for the page flip to complete, the
+            <literal>event-&gt;base.link</literal> list head can be used freely by
+            the driver to store the pending event in a driver-specific list.
+          </para>
+          <para>
+            If the file handle is closed before the event is signaled, drivers must
+            take care to destroy the event in their
+            <methodname>preclose</methodname> operation (and, if needed, call
+            <function>drm_vblank_put</function>).
+          </para>
+        </sect4>
+        <sect4>
+          <title>Miscellaneous</title>
+          <itemizedlist>
+            <listitem>
+              <synopsis>void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+                        uint32_t start, uint32_t size);</synopsis>
+              <para>
+                Apply a gamma table to the device. The operation is optional.
+              </para>
+            </listitem>
+            <listitem>
+              <synopsis>void (*destroy)(struct drm_crtc *crtc);</synopsis>
+              <para>
+                Destroy the CRTC when not needed anymore. See
+                <xref linkend="drm-kms-init"/>.
+              </para>
+            </listitem>
+          </itemizedlist>
+        </sect4>
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>Planes (struct <structname>drm_plane</structname>)</title>
+      <para>
+        A plane represents an image source that can be blended with or overlayed
+	on top of a CRTC during the scanout process. Planes are associated with
+	a frame buffer to crop a portion of the image memory (source) and
+	optionally scale it to a destination size. The result is then blended
+	with or overlayed on top of a CRTC.
+      </para>
+      <sect3>
+        <title>Plane Initialization</title>
+        <para>
+          Planes are optional. To create a plane, a KMS drivers allocates and
+          zeroes an instances of struct <structname>drm_plane</structname>
+          (possibly as part of a larger structure) and registers it with a call
+          to <function>drm_plane_init</function>. The function takes a bitmask
+          of the CRTCs that can be associated with the plane, a pointer to the
+          plane functions and a list of format supported formats.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Plane Operations</title>
+        <itemizedlist>
+          <listitem>
+            <synopsis>int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc,
+                        struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+                        unsigned int crtc_w, unsigned int crtc_h,
+                        uint32_t src_x, uint32_t src_y,
+                        uint32_t src_w, uint32_t src_h);</synopsis>
+            <para>
+              Enable and configure the plane to use the given CRTC and frame buffer.
+            </para>
+            <para>
+              The source rectangle in frame buffer memory coordinates is given by
+              the <parameter>src_x</parameter>, <parameter>src_y</parameter>,
+              <parameter>src_w</parameter> and <parameter>src_h</parameter>
+              parameters (as 16.16 fixed point values). Devices that don't support
+              subpixel plane coordinates can ignore the fractional part.
+            </para>
+            <para>
+              The destination rectangle in CRTC coordinates is given by the
+              <parameter>crtc_x</parameter>, <parameter>crtc_y</parameter>,
+              <parameter>crtc_w</parameter> and <parameter>crtc_h</parameter>
+              parameters (as integer values). Devices scale the source rectangle to
+              the destination rectangle. If scaling is not supported, and the source
+              rectangle size doesn't match the destination rectangle size, the
+              driver must return a -<errorname>EINVAL</errorname> error.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>int (*disable_plane)(struct drm_plane *plane);</synopsis>
+            <para>
+              Disable the plane. The DRM core calls this method in response to a
+              DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0.
+              Disabled planes must not be processed by the CRTC.
+            </para>
+          </listitem>
+          <listitem>
+            <synopsis>void (*destroy)(struct drm_plane *plane);</synopsis>
+            <para>
+              Destroy the plane when not needed anymore. See
+              <xref linkend="drm-kms-init"/>.
+            </para>
+          </listitem>
+        </itemizedlist>
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>Encoders (struct <structname>drm_encoder</structname>)</title>
+      <para>
+        An encoder takes pixel data from a CRTC and converts it to a format
+	suitable for any attached connectors. On some devices, it may be
+	possible to have a CRTC send data to more than one encoder. In that
+	case, both encoders would receive data from the same scanout buffer,
+	resulting in a "cloned" display configuration across the connectors
+	attached to each encoder.
+      </para>
+      <sect3>
+        <title>Encoder Initialization</title>
+        <para>
+          As for CRTCs, a KMS driver must create, initialize and register at
+          least one struct <structname>drm_encoder</structname> instance. The
+          instance is allocated and zeroed by the driver, possibly as part of a
+          larger structure.
+        </para>
+        <para>
+          Drivers must initialize the struct <structname>drm_encoder</structname>
+          <structfield>possible_crtcs</structfield> and
+          <structfield>possible_clones</structfield> fields before registering the
+          encoder. Both fields are bitmasks of respectively the CRTCs that the
+          encoder can be connected to, and sibling encoders candidate for cloning.
+        </para>
+        <para>
+          After being initialized, the encoder must be registered with a call to
+          <function>drm_encoder_init</function>. The function takes a pointer to
+          the encoder functions and an encoder type. Supported types are
+          <itemizedlist>
+            <listitem>
+              DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A
+              </listitem>
+            <listitem>
+              DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort
+            </listitem>
+            <listitem>
+              DRM_MODE_ENCODER_LVDS for display panels
+            </listitem>
+            <listitem>
+              DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component,
+              SCART)
+            </listitem>
+            <listitem>
+              DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
+            </listitem>
+          </itemizedlist>
+        </para>
+        <para>
+          Encoders must be attached to a CRTC to be used. DRM drivers leave
+          encoders unattached at initialization time. Applications (or the fbdev
+          compatibility layer when implemented) are responsible for attaching the
+          encoders they want to use to a CRTC.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Encoder Operations</title>
+        <itemizedlist>
+          <listitem>
+            <synopsis>void (*destroy)(struct drm_encoder *encoder);</synopsis>
+            <para>
+              Called to destroy the encoder when not needed anymore. See
+              <xref linkend="drm-kms-init"/>.
+            </para>
+          </listitem>
+        </itemizedlist>
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>Connectors (struct <structname>drm_connector</structname>)</title>
+      <para>
+        A connector is the final destination for pixel data on a device, and
+	usually connects directly to an external display device like a monitor
+	or laptop panel. A connector can only be attached to one encoder at a
+	time. The connector is also the structure where information about the
+	attached display is kept, so it contains fields for display data, EDID
+	data, DPMS &amp; connection status, and information about modes
+	supported on the attached displays.
+      </para>
+      <sect3>
+        <title>Connector Initialization</title>
+        <para>
+          Finally a KMS driver must create, initialize, register and attach at
+          least one struct <structname>drm_connector</structname> instance. The
+          instance is created as other KMS objects and initialized by setting the
+          following fields.
+        </para>
+        <variablelist>
+          <varlistentry>
+            <term><structfield>interlace_allowed</structfield></term>
+            <listitem><para>
+              Whether the connector can handle interlaced modes.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term><structfield>doublescan_allowed</structfield></term>
+            <listitem><para>
+              Whether the connector can handle doublescan.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term><structfield>display_info
+            </structfield></term>
+            <listitem><para>
+              Display information is filled from EDID information when a display
+              is detected. For non hot-pluggable displays such as flat panels in
+              embedded systems, the driver should initialize the
+              <structfield>display_info</structfield>.<structfield>width_mm</structfield>
+              and
+              <structfield>display_info</structfield>.<structfield>height_mm</structfield>
+              fields with the physical size of the display.
+            </para></listitem>
+          </varlistentry>
+          <varlistentry>
+            <term id="drm-kms-connector-polled"><structfield>polled</structfield></term>
+            <listitem><para>
+              Connector polling mode, a combination of
+              <variablelist>
+                <varlistentry>
+                  <term>DRM_CONNECTOR_POLL_HPD</term>
+                  <listitem><para>
+                    The connector generates hotplug events and doesn't need to be
+                    periodically polled. The CONNECT and DISCONNECT flags must not
+                    be set together with the HPD flag.
+                  </para></listitem>
+                </varlistentry>
+                <varlistentry>
+                  <term>DRM_CONNECTOR_POLL_CONNECT</term>
+                  <listitem><para>
+                    Periodically poll the connector for connection.
+                  </para></listitem>
+                </varlistentry>
+                <varlistentry>
+                  <term>DRM_CONNECTOR_POLL_DISCONNECT</term>
+                  <listitem><para>
+                    Periodically poll the connector for disconnection.
+                  </para></listitem>
+                </varlistentry>
+              </variablelist>
+              Set to 0 for connectors that don't support connection status
+              discovery.
+            </para></listitem>
+          </varlistentry>
+        </variablelist>
+        <para>
+          The connector is then registered with a call to
+          <function>drm_connector_init</function> with a pointer to the connector
+          functions and a connector type, and exposed through sysfs with a call to
+          <function>drm_sysfs_connector_add</function>.
+        </para>
+        <para>
+          Supported connector types are
+          <itemizedlist>
+            <listitem>DRM_MODE_CONNECTOR_VGA</listitem>
+            <listitem>DRM_MODE_CONNECTOR_DVII</listitem>
+            <listitem>DRM_MODE_CONNECTOR_DVID</listitem>
+            <listitem>DRM_MODE_CONNECTOR_DVIA</listitem>
+            <listitem>DRM_MODE_CONNECTOR_Composite</listitem>
+            <listitem>DRM_MODE_CONNECTOR_SVIDEO</listitem>
+            <listitem>DRM_MODE_CONNECTOR_LVDS</listitem>
+            <listitem>DRM_MODE_CONNECTOR_Component</listitem>
+            <listitem>DRM_MODE_CONNECTOR_9PinDIN</listitem>
+            <listitem>DRM_MODE_CONNECTOR_DisplayPort</listitem>
+            <listitem>DRM_MODE_CONNECTOR_HDMIA</listitem>
+            <listitem>DRM_MODE_CONNECTOR_HDMIB</listitem>
+            <listitem>DRM_MODE_CONNECTOR_TV</listitem>
+            <listitem>DRM_MODE_CONNECTOR_eDP</listitem>
+            <listitem>DRM_MODE_CONNECTOR_VIRTUAL</listitem>
+          </itemizedlist>
+        </para>
+        <para>
+          Connectors must be attached to an encoder to be used. For devices that
+          map connectors to encoders 1:1, the connector should be attached at
+          initialization time with a call to
+          <function>drm_mode_connector_attach_encoder</function>. The driver must
+          also set the <structname>drm_connector</structname>
+          <structfield>encoder</structfield> field to point to the attached
+          encoder.
+        </para>
+        <para>
+          Finally, drivers must initialize the connectors state change detection
+          with a call to <function>drm_kms_helper_poll_init</function>. If at
+          least one connector is pollable but can't generate hotplug interrupts
+          (indicated by the DRM_CONNECTOR_POLL_CONNECT and
+          DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will
+          automatically be queued to periodically poll for changes. Connectors
+          that can generate hotplug interrupts must be marked with the
+          DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must
+          call <function>drm_helper_hpd_irq_event</function>. The function will
+          queue a delayed work to check the state of all connectors, but no
+          periodic polling will be done.
+        </para>
+      </sect3>
+      <sect3>
+        <title>Connector Operations</title>
+        <note><para>
+          Unless otherwise state, all operations are mandatory.
+        </para></note>
+        <sect4>
+          <title>DPMS</title>
+          <synopsis>void (*dpms)(struct drm_connector *connector, int mode);</synopsis>
+          <para>
+            The DPMS operation sets the power state of a connector. The mode
+            argument is one of
+            <itemizedlist>
+              <listitem><para>DRM_MODE_DPMS_ON</para></listitem>
+              <listitem><para>DRM_MODE_DPMS_STANDBY</para></listitem>
+              <listitem><para>DRM_MODE_DPMS_SUSPEND</para></listitem>
+              <listitem><para>DRM_MODE_DPMS_OFF</para></listitem>
+            </itemizedlist>
+          </para>
+          <para>
+            In all but DPMS_ON mode the encoder to which the connector is attached
+            should put the display in low-power mode by driving its signals
+            appropriately. If more than one connector is attached to the encoder
+            care should be taken not to change the power state of other displays as
+            a side effect. Low-power mode should be propagated to the encoders and
+            CRTCs when all related connectors are put in low-power mode.
+          </para>
+        </sect4>
+        <sect4>
+          <title>Modes</title>
+          <synopsis>int (*fill_modes)(struct drm_connector *connector, uint32_t max_width,
+                      uint32_t max_height);</synopsis>
+          <para>
+            Fill the mode list with all supported modes for the connector. If the
+            <parameter>max_width</parameter> and <parameter>max_height</parameter>
+            arguments are non-zero, the implementation must ignore all modes wider
+            than <parameter>max_width</parameter> or higher than
+            <parameter>max_height</parameter>.
+          </para>
+          <para>
+            The connector must also fill in this operation its
+            <structfield>display_info</structfield>
+            <structfield>width_mm</structfield> and
+            <structfield>height_mm</structfield> fields with the connected display
+            physical size in millimeters. The fields should be set to 0 if the value
+            isn't known or is not applicable (for instance for projector devices).
+          </para>
+        </sect4>
+        <sect4>
+          <title>Connection Status</title>
+          <para>
+            The connection status is updated through polling or hotplug events when
+            supported (see <xref linkend="drm-kms-connector-polled"/>). The status
+            value is reported to userspace through ioctls and must not be used
+            inside the driver, as it only gets initialized by a call to
+            <function>drm_mode_getconnector</function> from userspace.
+          </para>
+          <synopsis>enum drm_connector_status (*detect)(struct drm_connector *connector,
+                                        bool force);</synopsis>
+          <para>
+            Check to see if anything is attached to the connector. The
+            <parameter>force</parameter> parameter is set to false whilst polling or
+            to true when checking the connector due to user request.
+            <parameter>force</parameter> can be used by the driver to avoid
+            expensive, destructive operations during automated probing.
+          </para>
+          <para>
+            Return connector_status_connected if something is connected to the
+            connector, connector_status_disconnected if nothing is connected and
+            connector_status_unknown if the connection state isn't known.
+          </para>
+          <para>
+            Drivers should only return connector_status_connected if the connection
+            status has really been probed as connected. Connectors that can't detect
+            the connection status, or failed connection status probes, should return
+            connector_status_unknown.
+          </para>
+        </sect4>
+        <sect4>
+          <title>Miscellaneous</title>
+          <itemizedlist>
+            <listitem>
+              <synopsis>void (*destroy)(struct drm_connector *connector);</synopsis>
+              <para>
+                Destroy the connector when not needed anymore. See
+                <xref linkend="drm-kms-init"/>.
+              </para>
+            </listitem>
+          </itemizedlist>
+        </sect4>
+      </sect3>
+    </sect2>
+    <sect2>
+      <title>Cleanup</title>
+      <para>
+        The DRM core manages its objects' lifetime. When an object is not needed
+	anymore the core calls its destroy function, which must clean up and
+	free every resource allocated for the object. Every
+	<function>drm_*_init</function> call must be matched with a
+	corresponding <function>drm_*_cleanup</function> call to cleanup CRTCs
+	(<function>drm_crtc_cleanup</function>), planes
+	(<function>drm_plane_cleanup</function>), encoders
+	(<function>drm_encoder_cleanup</function>) and connectors
+	(<function>drm_connector_cleanup</function>). Furthermore, connectors
+	that have been added to sysfs must be removed by a call to
+	<function>drm_sysfs_connector_remove</function> before calling
+	<function>drm_connector_cleanup</function>.
+      </para>
+      <para>
+        Connectors state change detection must be cleanup up with a call to
+	<function>drm_kms_helper_poll_fini</function>.
+      </para>
+    </sect2>
+    <sect2>
+      <title>Output discovery and initialization example</title>
+      <programlisting><![CDATA[
+void intel_crt_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+
+	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, &intel_output->base,
+			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+			 DRM_MODE_ENCODER_DAC);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+
+	/* Set up the DDC bus. */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+	if (!intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		return;
+	}
+
+	intel_output->type = INTEL_OUTPUT_ANALOG;
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+}]]></programlisting>
+      <para>
+        In the example above (taken from the i915 driver), a CRTC, connector and
+        encoder combination is created. A device-specific i2c bus is also
+        created for fetching EDID data and performing monitor detection. Once
+        the process is complete, the new connector is registered with sysfs to
+        make its properties available to applications.
+      </para>
+    </sect2>
+    <sect2>
+      <title>KMS API Functions</title>
+!Edrivers/gpu/drm/drm_crtc.c
+    </sect2>
+  </sect1>
+
+  <!-- Internals: kms helper functions -->
+
+  <sect1>
+    <title>Mode Setting Helper Functions</title>
+    <para>
+      The CRTC, encoder and connector functions provided by the drivers
+      implement the DRM API. They're called by the DRM core and ioctl handlers
+      to handle device state changes and configuration request. As implementing
+      those functions often requires logic not specific to drivers, mid-layer
+      helper functions are available to avoid duplicating boilerplate code.
+    </para>
+    <para>
+      The DRM core contains one mid-layer implementation. The mid-layer provides
+      implementations of several CRTC, encoder and connector functions (called
+      from the top of the mid-layer) that pre-process requests and call
+      lower-level functions provided by the driver (at the bottom of the
+      mid-layer). For instance, the
+      <function>drm_crtc_helper_set_config</function> function can be used to
+      fill the struct <structname>drm_crtc_funcs</structname>
+      <structfield>set_config</structfield> field. When called, it will split
+      the <methodname>set_config</methodname> operation in smaller, simpler
+      operations and call the driver to handle them.
+    </para>
+    <para>
+      To use the mid-layer, drivers call <function>drm_crtc_helper_add</function>,
+      <function>drm_encoder_helper_add</function> and
+      <function>drm_connector_helper_add</function> functions to install their
+      mid-layer bottom operations handlers, and fill the
+      <structname>drm_crtc_funcs</structname>,
+      <structname>drm_encoder_funcs</structname> and
+      <structname>drm_connector_funcs</structname> structures with pointers to
+      the mid-layer top API functions. Installing the mid-layer bottom operation
+      handlers is best done right after registering the corresponding KMS object.
+    </para>
+    <para>
+      The mid-layer is not split between CRTC, encoder and connector operations.
+      To use it, a driver must provide bottom functions for all of the three KMS
+      entities.
+    </para>
+    <sect2>
+      <title>Helper Functions</title>
+      <itemizedlist>
+        <listitem>
+          <synopsis>int drm_crtc_helper_set_config(struct drm_mode_set *set);</synopsis>
+          <para>
+            The <function>drm_crtc_helper_set_config</function> helper function
+            is a CRTC <methodname>set_config</methodname> implementation. It
+            first tries to locate the best encoder for each connector by calling
+            the connector <methodname>best_encoder</methodname> helper
+            operation.
+          </para>
+          <para>
+            After locating the appropriate encoders, the helper function will
+            call the <methodname>mode_fixup</methodname> encoder and CRTC helper
+            operations to adjust the requested mode, or reject it completely in
+            which case an error will be returned to the application. If the new
+            configuration after mode adjustment is identical to the current
+            configuration the helper function will return without performing any
+            other operation.
+          </para>
+          <para>
+            If the adjusted mode is identical to the current mode but changes to
+            the frame buffer need to be applied, the
+            <function>drm_crtc_helper_set_config</function> function will call
+            the CRTC <methodname>mode_set_base</methodname> helper operation. If
+            the adjusted mode differs from the current mode, or if the
+            <methodname>mode_set_base</methodname> helper operation is not
+            provided, the helper function performs a full mode set sequence by
+            calling the <methodname>prepare</methodname>,
+            <methodname>mode_set</methodname> and
+            <methodname>commit</methodname> CRTC and encoder helper operations,
+            in that order.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>void drm_helper_connector_dpms(struct drm_connector *connector, int mode);</synopsis>
+          <para>
+            The <function>drm_helper_connector_dpms</function> helper function
+            is a connector <methodname>dpms</methodname> implementation that
+            tracks power state of connectors. To use the function, drivers must
+            provide <methodname>dpms</methodname> helper operations for CRTCs
+            and encoders to apply the DPMS state to the device.
+          </para>
+          <para>
+            The mid-layer doesn't track the power state of CRTCs and encoders.
+            The <methodname>dpms</methodname> helper operations can thus be
+            called with a mode identical to the currently active mode.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+                                            uint32_t maxX, uint32_t maxY);</synopsis>
+          <para>
+            The <function>drm_helper_probe_single_connector_modes</function> helper
+            function is a connector <methodname>fill_modes</methodname>
+            implementation that updates the connection status for the connector
+            and then retrieves a list of modes by calling the connector
+            <methodname>get_modes</methodname> helper operation.
+          </para>
+          <para>
+            The function filters out modes larger than
+            <parameter>max_width</parameter> and <parameter>max_height</parameter>
+            if specified. It then calls the connector
+            <methodname>mode_valid</methodname> helper operation for  each mode in
+            the probed list to check whether the mode is valid for the connector.
+          </para>
+        </listitem>
+      </itemizedlist>
+    </sect2>
+    <sect2>
+      <title>CRTC Helper Operations</title>
+      <itemizedlist>
+        <listitem id="drm-helper-crtc-mode-fixup">
+          <synopsis>bool (*mode_fixup)(struct drm_crtc *crtc,
+                       const struct drm_display_mode *mode,
+                       struct drm_display_mode *adjusted_mode);</synopsis>
+          <para>
+            Let CRTCs adjust the requested mode or reject it completely. This
+            operation returns true if the mode is accepted (possibly after being
+            adjusted) or false if it is rejected.
+          </para>
+          <para>
+            The <methodname>mode_fixup</methodname> operation should reject the
+            mode if it can't reasonably use it. The definition of "reasonable"
+            is currently fuzzy in this context. One possible behaviour would be
+            to set the adjusted mode to the panel timings when a fixed-mode
+            panel is used with hardware capable of scaling. Another behaviour
+            would be to accept any input mode and adjust it to the closest mode
+            supported by the hardware (FIXME: This needs to be clarified).
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
+                     struct drm_framebuffer *old_fb)</synopsis>
+          <para>
+            Move the CRTC on the current frame buffer (stored in
+            <literal>crtc-&gt;fb</literal>) to position (x,y). Any of the frame
+            buffer, x position or y position may have been modified.
+          </para>
+          <para>
+            This helper operation is optional. If not provided, the
+            <function>drm_crtc_helper_set_config</function> function will fall
+            back to the <methodname>mode_set</methodname> helper operation.
+          </para>
+          <note><para>
+            FIXME: Why are x and y passed as arguments, as they can be accessed
+            through <literal>crtc-&gt;x</literal> and
+            <literal>crtc-&gt;y</literal>?
+          </para></note>
+        </listitem>
+        <listitem>
+          <synopsis>void (*prepare)(struct drm_crtc *crtc);</synopsis>
+          <para>
+            Prepare the CRTC for mode setting. This operation is called after
+            validating the requested mode. Drivers use it to perform
+            device-specific operations required before setting the new mode.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+                struct drm_display_mode *adjusted_mode, int x, int y,
+                struct drm_framebuffer *old_fb);</synopsis>
+          <para>
+            Set a new mode, position and frame buffer. Depending on the device
+            requirements, the mode can be stored internally by the driver and
+            applied in the <methodname>commit</methodname> operation, or
+            programmed to the hardware immediately.
+          </para>
+          <para>
+            The <methodname>mode_set</methodname> operation returns 0 on success
+	    or a negative error code if an error occurs.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>void (*commit)(struct drm_crtc *crtc);</synopsis>
+          <para>
+            Commit a mode. This operation is called after setting the new mode.
+            Upon return the device must use the new mode and be fully
+            operational.
+          </para>
+        </listitem>
+      </itemizedlist>
+    </sect2>
+    <sect2>
+      <title>Encoder Helper Operations</title>
+      <itemizedlist>
+        <listitem>
+          <synopsis>bool (*mode_fixup)(struct drm_encoder *encoder,
+                       const struct drm_display_mode *mode,
+                       struct drm_display_mode *adjusted_mode);</synopsis>
+          <note><para>
+            FIXME: The mode argument be const, but the i915 driver modifies
+            mode-&gt;clock in <function>intel_dp_mode_fixup</function>.
+          </para></note>
+          <para>
+            Let encoders adjust the requested mode or reject it completely. This
+            operation returns true if the mode is accepted (possibly after being
+            adjusted) or false if it is rejected. See the
+            <link linkend="drm-helper-crtc-mode-fixup">mode_fixup CRTC helper
+            operation</link> for an explanation of the allowed adjustments.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>void (*prepare)(struct drm_encoder *encoder);</synopsis>
+          <para>
+            Prepare the encoder for mode setting. This operation is called after
+            validating the requested mode. Drivers use it to perform
+            device-specific operations required before setting the new mode.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>void (*mode_set)(struct drm_encoder *encoder,
+                 struct drm_display_mode *mode,
+                 struct drm_display_mode *adjusted_mode);</synopsis>
+          <para>
+            Set a new mode. Depending on the device requirements, the mode can
+            be stored internally by the driver and applied in the
+            <methodname>commit</methodname> operation, or programmed to the
+            hardware immediately.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>void (*commit)(struct drm_encoder *encoder);</synopsis>
+          <para>
+            Commit a mode. This operation is called after setting the new mode.
+            Upon return the device must use the new mode and be fully
+            operational.
+          </para>
+        </listitem>
+      </itemizedlist>
+    </sect2>
+    <sect2>
+      <title>Connector Helper Operations</title>
+      <itemizedlist>
+        <listitem>
+          <synopsis>struct drm_encoder *(*best_encoder)(struct drm_connector *connector);</synopsis>
+          <para>
+            Return a pointer to the best encoder for the connecter. Device that
+            map connectors to encoders 1:1 simply return the pointer to the
+            associated encoder. This operation is mandatory.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>int (*get_modes)(struct drm_connector *connector);</synopsis>
+          <para>
+            Fill the connector's <structfield>probed_modes</structfield> list
+            by parsing EDID data with <function>drm_add_edid_modes</function> or
+            calling <function>drm_mode_probed_add</function> directly for every
+            supported mode and return the number of modes it has detected. This
+            operation is mandatory.
+          </para>
+          <para>
+            When adding modes manually the driver creates each mode with a call to
+            <function>drm_mode_create</function> and must fill the following fields.
+            <itemizedlist>
+              <listitem>
+                <synopsis>__u32 type;</synopsis>
+                <para>
+                  Mode type bitmask, a combination of
+                  <variablelist>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_BUILTIN</term>
+                      <listitem><para>not used?</para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_CLOCK_C</term>
+                      <listitem><para>not used?</para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_CRTC_C</term>
+                      <listitem><para>not used?</para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>
+        DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector
+                      </term>
+                      <listitem>
+                        <para>not used?</para>
+                      </listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_DEFAULT</term>
+                      <listitem><para>not used?</para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_USERDEF</term>
+                      <listitem><para>not used?</para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_TYPE_DRIVER</term>
+                      <listitem>
+                        <para>
+                          The mode has been created by the driver (as opposed to
+                          to user-created modes).
+                        </para>
+                      </listitem>
+                    </varlistentry>
+                  </variablelist>
+                  Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they
+                  create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred
+                  mode.
+                </para>
+              </listitem>
+              <listitem>
+                <synopsis>__u32 clock;</synopsis>
+                <para>Pixel clock frequency in kHz unit</para>
+              </listitem>
+              <listitem>
+                <synopsis>__u16 hdisplay, hsync_start, hsync_end, htotal;
+    __u16 vdisplay, vsync_start, vsync_end, vtotal;</synopsis>
+                <para>Horizontal and vertical timing information</para>
+                <screen><![CDATA[
+             Active                 Front           Sync           Back
+             Region                 Porch                          Porch
+    <-----------------------><----------------><-------------><-------------->
+
+      //////////////////////|
+     ////////////////////// |
+    //////////////////////  |..................               ................
+                                               _______________
+
+    <----- [hv]display ----->
+    <------------- [hv]sync_start ------------>
+    <--------------------- [hv]sync_end --------------------->
+    <-------------------------------- [hv]total ----------------------------->
+]]></screen>
+              </listitem>
+              <listitem>
+                <synopsis>__u16 hskew;
+    __u16 vscan;</synopsis>
+                <para>Unknown</para>
+              </listitem>
+              <listitem>
+                <synopsis>__u32 flags;</synopsis>
+                <para>
+                  Mode flags, a combination of
+                  <variablelist>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_PHSYNC</term>
+                      <listitem><para>
+                        Horizontal sync is active high
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_NHSYNC</term>
+                      <listitem><para>
+                        Horizontal sync is active low
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_PVSYNC</term>
+                      <listitem><para>
+                        Vertical sync is active high
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_NVSYNC</term>
+                      <listitem><para>
+                        Vertical sync is active low
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_INTERLACE</term>
+                      <listitem><para>
+                        Mode is interlaced
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_DBLSCAN</term>
+                      <listitem><para>
+                        Mode uses doublescan
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_CSYNC</term>
+                      <listitem><para>
+                        Mode uses composite sync
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_PCSYNC</term>
+                      <listitem><para>
+                        Composite sync is active high
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_NCSYNC</term>
+                      <listitem><para>
+                        Composite sync is active low
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_HSKEW</term>
+                      <listitem><para>
+                        hskew provided (not used?)
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_BCAST</term>
+                      <listitem><para>
+                        not used?
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_PIXMUX</term>
+                      <listitem><para>
+                        not used?
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_DBLCLK</term>
+                      <listitem><para>
+                        not used?
+                      </para></listitem>
+                    </varlistentry>
+                    <varlistentry>
+                      <term>DRM_MODE_FLAG_CLKDIV2</term>
+                      <listitem><para>
+                        ?
+                      </para></listitem>
+                    </varlistentry>
+                  </variablelist>
+                </para>
+                <para>
+                  Note that modes marked with the INTERLACE or DBLSCAN flags will be
+                  filtered out by
+                  <function>drm_helper_probe_single_connector_modes</function> if
+                  the connector's <structfield>interlace_allowed</structfield> or
+                  <structfield>doublescan_allowed</structfield> field is set to 0.
+                </para>
+              </listitem>
+              <listitem>
+                <synopsis>char name[DRM_DISPLAY_MODE_LEN];</synopsis>
+                <para>
+                  Mode name. The driver must call
+                  <function>drm_mode_set_name</function> to fill the mode name from
+                  <structfield>hdisplay</structfield>,
+                  <structfield>vdisplay</structfield> and interlace flag after
+                  filling the corresponding fields.
+                </para>
+              </listitem>
+            </itemizedlist>
+          </para>
+          <para>
+            The <structfield>vrefresh</structfield> value is computed by
+            <function>drm_helper_probe_single_connector_modes</function>.
+          </para>
+          <para>
+            When parsing EDID data, <function>drm_add_edid_modes</function> fill the
+            connector <structfield>display_info</structfield>
+            <structfield>width_mm</structfield> and
+            <structfield>height_mm</structfield> fields. When creating modes
+            manually the <methodname>get_modes</methodname> helper operation must
+            set the <structfield>display_info</structfield>
+            <structfield>width_mm</structfield> and
+            <structfield>height_mm</structfield> fields if they haven't been set
+            already (for instance at initilization time when a fixed-size panel is
+            attached to the connector). The mode <structfield>width_mm</structfield>
+            and <structfield>height_mm</structfield> fields are only used internally
+            during EDID parsing and should not be set when creating modes manually.
+          </para>
+        </listitem>
+        <listitem>
+          <synopsis>int (*mode_valid)(struct drm_connector *connector,
+		  struct drm_display_mode *mode);</synopsis>
+          <para>
+            Verify whether a mode is valid for the connector. Return MODE_OK for
+            supported modes and one of the enum drm_mode_status values (MODE_*)
+            for unsupported modes. This operation is mandatory.
+          </para>
+          <para>
+            As the mode rejection reason is currently not used beside for
+            immediately removing the unsupported mode, an implementation can
+            return MODE_BAD regardless of the exact reason why the mode is not
+            valid.
+          </para>
+          <note><para>
+            Note that the <methodname>mode_valid</methodname> helper operation is
+            only called for modes detected by the device, and
+            <emphasis>not</emphasis> for modes set by the user through the CRTC
+            <methodname>set_config</methodname> operation.
+          </para></note>
+        </listitem>
+      </itemizedlist>
+    </sect2>
+    <sect2>
+      <title>Modeset Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_crtc_helper.c
+    </sect2>
+    <sect2>
+      <title>fbdev Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers
+!Edrivers/gpu/drm/drm_fb_helper.c
+!Iinclude/drm/drm_fb_helper.h
+    </sect2>
+    <sect2>
+      <title>Display Port Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
+!Iinclude/drm/drm_dp_helper.h
+!Edrivers/gpu/drm/drm_dp_helper.c
+    </sect2>
+    <sect2>
+      <title>EDID Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_edid.c
+    </sect2>
+  </sect1>
+
+  <!-- Internals: vertical blanking -->
+
+  <sect1 id="drm-vertical-blank">
+    <title>Vertical Blanking</title>
+    <para>
+      Vertical blanking plays a major role in graphics rendering. To achieve
+      tear-free display, users must synchronize page flips and/or rendering to
+      vertical blanking. The DRM API offers ioctls to perform page flips
+      synchronized to vertical blanking and wait for vertical blanking.
+    </para>
+    <para>
+      The DRM core handles most of the vertical blanking management logic, which
+      involves filtering out spurious interrupts, keeping race-free blanking
+      counters, coping with counter wrap-around and resets and keeping use
+      counts. It relies on the driver to generate vertical blanking interrupts
+      and optionally provide a hardware vertical blanking counter. Drivers must
+      implement the following operations.
+    </para>
+    <itemizedlist>
+      <listitem>
+        <synopsis>int (*enable_vblank) (struct drm_device *dev, int crtc);
+void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
+        <para>
+	  Enable or disable vertical blanking interrupts for the given CRTC.
+	</para>
+      </listitem>
+      <listitem>
+        <synopsis>u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);</synopsis>
+        <para>
+	  Retrieve the value of the vertical blanking counter for the given
+	  CRTC. If the hardware maintains a vertical blanking counter its value
+	  should be returned. Otherwise drivers can use the
+	  <function>drm_vblank_count</function> helper function to handle this
+	  operation.
+	</para>
+      </listitem>
+    </itemizedlist>
+    <para>
+      Drivers must initialize the vertical blanking handling core with a call to
+      <function>drm_vblank_init</function> in their
+      <methodname>load</methodname> operation. The function will set the struct
+      <structname>drm_device</structname>
+      <structfield>vblank_disable_allowed</structfield> field to 0. This will
+      keep vertical blanking interrupts enabled permanently until the first mode
+      set operation, where <structfield>vblank_disable_allowed</structfield> is
+      set to 1. The reason behind this is not clear. Drivers can set the field
+      to 1 after <function>calling drm_vblank_init</function> to make vertical
+      blanking interrupts dynamically managed from the beginning.
+    </para>
+    <para>
+      Vertical blanking interrupts can be enabled by the DRM core or by drivers
+      themselves (for instance to handle page flipping operations). The DRM core
+      maintains a vertical blanking use count to ensure that the interrupts are
+      not disabled while a user still needs them. To increment the use count,
+      drivers call <function>drm_vblank_get</function>. Upon return vertical
+      blanking interrupts are guaranteed to be enabled.
+    </para>
+    <para>
+      To decrement the use count drivers call
+      <function>drm_vblank_put</function>. Only when the use count drops to zero
+      will the DRM core disable the vertical blanking interrupts after a delay
+      by scheduling a timer. The delay is accessible through the vblankoffdelay
+      module parameter or the <varname>drm_vblank_offdelay</varname> global
+      variable and expressed in milliseconds. Its default value is 5000 ms.
+    </para>
+    <para>
+      When a vertical blanking interrupt occurs drivers only need to call the
+      <function>drm_handle_vblank</function> function to account for the
+      interrupt.
+    </para>
+    <para>
+      Resources allocated by <function>drm_vblank_init</function> must be freed
+      with a call to <function>drm_vblank_cleanup</function> in the driver
+      <methodname>unload</methodname> operation handler.
+    </para>
+  </sect1>
+
+  <!-- Internals: open/close, file operations and ioctls -->
+
+  <sect1>
+    <title>Open/Close, File Operations and IOCTLs</title>
+    <sect2>
+      <title>Open and Close</title>
+      <synopsis>int (*firstopen) (struct drm_device *);
+void (*lastclose) (struct drm_device *);
+int (*open) (struct drm_device *, struct drm_file *);
+void (*preclose) (struct drm_device *, struct drm_file *);
+void (*postclose) (struct drm_device *, struct drm_file *);</synopsis>
+      <abstract>Open and close handlers. None of those methods are mandatory.
+      </abstract>
+      <para>
+        The <methodname>firstopen</methodname> method is called by the DRM core
+	when an application opens a device that has no other opened file handle.
+	Similarly the <methodname>lastclose</methodname> method is called when
+	the last application holding a file handle opened on the device closes
+	it. Both methods are mostly used for UMS (User Mode Setting) drivers to
+	acquire and release device resources which should be done in the
+	<methodname>load</methodname> and <methodname>unload</methodname>
+	methods for KMS drivers.
+      </para>
+      <para>
+        Note that the <methodname>lastclose</methodname> method is also called
+	at module unload time or, for hot-pluggable devices, when the device is
+	unplugged. The <methodname>firstopen</methodname> and
+	<methodname>lastclose</methodname> calls can thus be unbalanced.
+      </para>
+      <para>
+        The <methodname>open</methodname> method is called every time the device
+	is opened by an application. Drivers can allocate per-file private data
+	in this method and store them in the struct
+	<structname>drm_file</structname> <structfield>driver_priv</structfield>
+	field. Note that the <methodname>open</methodname> method is called
+	before <methodname>firstopen</methodname>.
+      </para>
+      <para>
+        The close operation is split into <methodname>preclose</methodname> and
+	<methodname>postclose</methodname> methods. Drivers must stop and
+	cleanup all per-file operations in the <methodname>preclose</methodname>
+	method. For instance pending vertical blanking and page flip events must
+	be cancelled. No per-file operation is allowed on the file handle after
+	returning from the <methodname>preclose</methodname> method.
+      </para>
+      <para>
+        Finally the <methodname>postclose</methodname> method is called as the
+	last step of the close operation, right before calling the
+	<methodname>lastclose</methodname> method if no other open file handle
+	exists for the device. Drivers that have allocated per-file private data
+	in the <methodname>open</methodname> method should free it here.
+      </para>
+      <para>
+        The <methodname>lastclose</methodname> method should restore CRTC and
+	plane properties to default value, so that a subsequent open of the
+	device will not inherit state from the previous user.
+      </para>
+    </sect2>
+    <sect2>
+      <title>File Operations</title>
+      <synopsis>const struct file_operations *fops</synopsis>
+      <abstract>File operations for the DRM device node.</abstract>
+      <para>
+        Drivers must define the file operations structure that forms the DRM
+	userspace API entry point, even though most of those operations are
+	implemented in the DRM core. The <methodname>open</methodname>,
+	<methodname>release</methodname> and <methodname>ioctl</methodname>
+	operations are handled by
+	<programlisting>
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+  #ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+  #endif
+        </programlisting>
+      </para>
+      <para>
+        Drivers that implement private ioctls that requires 32/64bit
+	compatibility support must provide their own
+	<methodname>compat_ioctl</methodname> handler that processes private
+	ioctls and calls <function>drm_compat_ioctl</function> for core ioctls.
+      </para>
+      <para>
+        The <methodname>read</methodname> and <methodname>poll</methodname>
+	operations provide support for reading DRM events and polling them. They
+	are implemented by
+	<programlisting>
+	.poll = drm_poll,
+	.read = drm_read,
+	.fasync = drm_fasync,
+	.llseek = no_llseek,
+	</programlisting>
+      </para>
+      <para>
+        The memory mapping implementation varies depending on how the driver
+	manages memory. Pre-GEM drivers will use <function>drm_mmap</function>,
+	while GEM-aware drivers will use <function>drm_gem_mmap</function>. See
+	<xref linkend="drm-gem"/>.
+	<programlisting>
+	.mmap = drm_gem_mmap,
+	</programlisting>
+      </para>
+      <para>
+        No other file operation is supported by the DRM API.
+      </para>
+    </sect2>
+    <sect2>
+      <title>IOCTLs</title>
+      <synopsis>struct drm_ioctl_desc *ioctls;
+int num_ioctls;</synopsis>
+      <abstract>Driver-specific ioctls descriptors table.</abstract>
+      <para>
+        Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls
+	descriptors table is indexed by the ioctl number offset from the base
+	value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the
+	table entries.
+      </para>
+      <para>
+        <programlisting>DRM_IOCTL_DEF_DRV(ioctl, func, flags)</programlisting>
+	<para>
+	  <parameter>ioctl</parameter> is the ioctl name. Drivers must define
+	  the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number
+	  offset from DRM_COMMAND_BASE and the ioctl number respectively. The
+	  first macro is private to the device while the second must be exposed
+	  to userspace in a public header.
+	</para>
+	<para>
+	  <parameter>func</parameter> is a pointer to the ioctl handler function
+	  compatible with the <type>drm_ioctl_t</type> type.
+	  <programlisting>typedef int drm_ioctl_t(struct drm_device *dev, void *data,
+		struct drm_file *file_priv);</programlisting>
+	</para>
+	<para>
+	  <parameter>flags</parameter> is a bitmask combination of the following
+	  values. It restricts how the ioctl is allowed to be called.
+	  <itemizedlist>
+	    <listitem><para>
+	      DRM_AUTH - Only authenticated callers allowed
+	    </para></listitem>
+	    <listitem><para>
+	      DRM_MASTER - The ioctl can only be called on the master file
+	      handle
+	    </para></listitem>
+            <listitem><para>
+	      DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed
+	    </para></listitem>
+            <listitem><para>
+	      DRM_CONTROL_ALLOW - The ioctl can only be called on a control
+	      device
+	    </para></listitem>
+            <listitem><para>
+	      DRM_UNLOCKED - The ioctl handler will be called without locking
+	      the DRM global mutex
+	    </para></listitem>
+	  </itemizedlist>
+	</para>
+      </para>
+    </sect2>
+  </sect1>
+
+  <sect1>
+    <title>Command submission &amp; fencing</title>
+    <para>
+      This should cover a few device-specific command submission
+      implementations.
+    </para>
+  </sect1>
+
+  <!-- Internals: suspend/resume -->
+
+  <sect1>
+    <title>Suspend/Resume</title>
+    <para>
+      The DRM core provides some suspend/resume code, but drivers wanting full
+      suspend/resume support should provide save() and restore() functions.
+      These are called at suspend, hibernate, or resume time, and should perform
+      any state save or restore required by your device across suspend or
+      hibernate states.
+    </para>
+    <synopsis>int (*suspend) (struct drm_device *, pm_message_t state);
+int (*resume) (struct drm_device *);</synopsis>
+    <para>
+      Those are legacy suspend and resume methods. New driver should use the
+      power management interface provided by their bus type (usually through
+      the struct <structname>device_driver</structname> dev_pm_ops) and set
+      these methods to NULL.
+    </para>
+  </sect1>
+
+  <sect1>
+    <title>DMA services</title>
+    <para>
+      This should cover how DMA mapping etc. is supported by the core.
+      These functions are deprecated and should not be used.
+    </para>
+  </sect1>
+  </chapter>
+
+<!-- TODO
+
+- Add a glossary
+- Document the struct_mutex catch-all lock
+- Document connector properties
+
+- Why is the load method optional?
+- What are drivers supposed to set the initial display state to, and how?
+  Connector's DPMS states are not initialized and are thus equal to
+  DRM_MODE_DPMS_ON. The fbcon compatibility layer calls
+  drm_helper_disable_unused_functions(), which disables unused encoders and
+  CRTCs, but doesn't touch the connectors' DPMS state, and
+  drm_helper_connector_dpms() in reaction to fbdev blanking events. Do drivers
+  that don't implement (or just don't use) fbcon compatibility need to call
+  those functions themselves?
+- KMS drivers must call drm_vblank_pre_modeset() and drm_vblank_post_modeset()
+  around mode setting. Should this be done in the DRM core?
+- vblank_disable_allowed is set to 1 in the first drm_vblank_post_modeset()
+  call and never set back to 0. It seems to be safe to permanently set it to 1
+  in drm_vblank_init() for KMS driver, and it might be safe for UMS drivers as
+  well. This should be investigated.
+- crtc and connector .save and .restore operations are only used internally in
+  drivers, should they be removed from the core?
+- encoder mid-layer .save and .restore operations are only used internally in
+  drivers, should they be removed from the core?
+- encoder mid-layer .detect operation is only used internally in drivers,
+  should it be removed from the core?
+-->
+
+  <!-- External interfaces -->
+
+  <chapter id="drmExternals">
+    <title>Userland interfaces</title>
+    <para>
+      The DRM core exports several interfaces to applications,
+      generally intended to be used through corresponding libdrm
+      wrapper functions.  In addition, drivers export device-specific
+      interfaces for use by userspace drivers &amp; device-aware
+      applications through ioctls and sysfs files.
+    </para>
+    <para>
+      External interfaces include: memory mapping, context management,
+      DMA operations, AGP management, vblank control, fence
+      management, memory management, and output management.
+    </para>
+    <para>
+      Cover generic ioctls and sysfs layout here.  We only need high-level
+      info, since man pages should cover the rest.
+    </para>
+
+  <!-- External: vblank handling -->
+
+    <sect1>
+      <title>VBlank event handling</title>
+      <para>
+        The DRM core exposes two vertical blank related ioctls:
+        <variablelist>
+          <varlistentry>
+            <term>DRM_IOCTL_WAIT_VBLANK</term>
+            <listitem>
+              <para>
+                This takes a struct drm_wait_vblank structure as its argument,
+                and it is used to block or request a signal when a specified
+                vblank event occurs.
+              </para>
+            </listitem>
+          </varlistentry>
+          <varlistentry>
+            <term>DRM_IOCTL_MODESET_CTL</term>
+            <listitem>
+              <para>
+                This should be called by application level drivers before and
+                after mode setting, since on many devices the vertical blank
+                counter is reset at that time.  Internally, the DRM snapshots
+                the last vblank count when the ioctl is called with the
+                _DRM_PRE_MODESET command, so that the counter won't go backwards
+                (which is dealt with when _DRM_POST_MODESET is used).
+              </para>
+            </listitem>
+          </varlistentry>
+        </variablelist>
+<!--!Edrivers/char/drm/drm_irq.c-->
+      </para>
+    </sect1>
+
+  </chapter>
+
+  <!-- API reference -->
+
+  <appendix id="drmDriverApi">
+    <title>DRM Driver API</title>
+    <para>
+      Include auto-generated API reference here (need to reference it
+      from paragraphs above too).
+    </para>
+  </appendix>
+
+</book>

linux-imx/Documentation/DocBook/filesystems.tmpl

diff --git a/linux-imx/Documentation/DocBook/filesystems.tmpl b/linux-imx/Documentation/DocBook/filesystems.tmpl
new file mode 100644
index 0000000..25b58ef
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/filesystems.tmpl
@@ -0,0 +1,426 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Linux-filesystems-API">
+ <bookinfo>
+  <title>Linux Filesystems API</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="vfs">
+     <title>The Linux VFS</title>
+     <sect1 id="the_filesystem_types"><title>The Filesystem types</title>
+!Iinclude/linux/fs.h
+     </sect1>
+     <sect1 id="the_directory_cache"><title>The Directory Cache</title>
+!Efs/dcache.c
+!Iinclude/linux/dcache.h
+     </sect1>
+     <sect1 id="inode_handling"><title>Inode Handling</title>
+!Efs/inode.c
+!Efs/bad_inode.c
+     </sect1>
+     <sect1 id="registration_and_superblocks"><title>Registration and Superblocks</title>
+!Efs/super.c
+     </sect1>
+     <sect1 id="file_locks"><title>File Locks</title>
+!Efs/locks.c
+!Ifs/locks.c
+     </sect1>
+     <sect1 id="other_functions"><title>Other Functions</title>
+!Efs/mpage.c
+!Efs/namei.c
+!Efs/buffer.c
+!Efs/bio.c
+!Efs/seq_file.c
+!Efs/filesystems.c
+!Efs/fs-writeback.c
+!Efs/block_dev.c
+     </sect1>
+  </chapter>
+
+  <chapter id="proc">
+     <title>The proc filesystem</title>
+
+     <sect1 id="sysctl_interface"><title>sysctl interface</title>
+!Ekernel/sysctl.c
+     </sect1>
+
+     <sect1 id="proc_filesystem_interface"><title>proc filesystem interface</title>
+!Ifs/proc/base.c
+     </sect1>
+  </chapter>
+
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
+  <chapter id="sysfs">
+     <title>The Filesystem for Exporting Kernel Objects</title>
+!Efs/sysfs/file.c
+!Efs/sysfs/symlink.c
+!Efs/sysfs/bin.c
+  </chapter>
+
+  <chapter id="debugfs">
+     <title>The debugfs filesystem</title>
+
+     <sect1 id="debugfs_interface"><title>debugfs interface</title>
+!Efs/debugfs/inode.c
+!Efs/debugfs/file.c
+     </sect1>
+  </chapter>
+
+  <chapter id="LinuxJDBAPI">
+  <chapterinfo>
+  <title>The Linux Journalling API</title>
+
+  <authorgroup>
+  <author>
+     <firstname>Roger</firstname>
+     <surname>Gammans</surname>
+     <affiliation>
+     <address>
+      <email>rgammans@computer-surgery.co.uk</email>
+     </address>
+    </affiliation>
+     </author>
+  </authorgroup>
+
+  <authorgroup>
+   <author>
+    <firstname>Stephen</firstname>
+    <surname>Tweedie</surname>
+    <affiliation>
+     <address>
+      <email>sct@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2002</year>
+   <holder>Roger Gammans</holder>
+  </copyright>
+  </chapterinfo>
+
+  <title>The Linux Journalling API</title>
+
+    <sect1 id="journaling_overview">
+     <title>Overview</title>
+    <sect2 id="journaling_details">
+     <title>Details</title>
+<para>
+The journalling layer is  easy to use. You need to
+first of all create a journal_t data structure. There are
+two calls to do this dependent on how you decide to allocate the physical
+media on which the journal resides. The journal_init_inode() call
+is for journals stored in filesystem inodes, or the journal_init_dev()
+call can be use for journal stored on a raw device (in a continuous range
+of blocks). A journal_t is a typedef for a struct pointer, so when
+you are finally finished make sure you call journal_destroy() on it
+to free up any used kernel memory.
+</para>
+
+<para>
+Once you have got your journal_t object you need to 'mount' or load the journal
+file, unless of course you haven't initialised it yet - in which case you
+need to call journal_create().
+</para>
+
+<para>
+Most of the time however your journal file will already have been created, but
+before you load it you must call journal_wipe() to empty the journal file.
+Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
+job of the client file system to detect this and skip the call to journal_wipe().
+</para>
+
+<para>
+In either case the next call should be to journal_load() which prepares the
+journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
+for you if it detects any outstanding transactions in the journal and similarly
+journal_load() will call journal_recover() if necessary.
+I would advise reading fs/ext3/super.c for examples on this stage.
+[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
+complicate the API. Or isn't a good idea for the journal layer to hide
+dirty mounts from the client fs]
+</para>
+
+<para>
+Now you can go ahead and start modifying the underlying
+filesystem. Almost.
+</para>
+
+<para>
+
+You still need to actually journal your filesystem changes, this
+is done by wrapping them into transactions. Additionally you
+also need to wrap the modification of each of the buffers
+with calls to the journal layer, so it knows what the modifications
+you are actually making are. To do this use  journal_start() which
+returns a transaction handle.
+</para>
+
+<para>
+journal_start()
+and its counterpart journal_stop(), which indicates the end of a transaction
+are nestable calls, so you can reenter a transaction if necessary,
+but remember you must call journal_stop() the same number of times as
+journal_start() before the transaction is completed (or more accurately
+leaves the update phase). Ext3/VFS makes use of this feature to simplify
+quota support.
+</para>
+
+<para>
+Inside each transaction you need to wrap the modifications to the
+individual buffers (blocks). Before you start to modify a buffer you
+need to call journal_get_{create,write,undo}_access() as appropriate,
+this allows the journalling layer to copy the unmodified data if it
+needs to. After all the buffer may be part of a previously uncommitted
+transaction.
+At this point you are at last ready to modify a buffer, and once
+you are have done so you need to call journal_dirty_{meta,}data().
+Or if you've asked for access to a buffer you now know is now longer
+required to be pushed back on the device you can call journal_forget()
+in much the same way as you might have used bforget() in the past.
+</para>
+
+<para>
+A journal_flush() may be called at any time to commit and checkpoint
+all your transactions.
+</para>
+
+<para>
+Then at umount time , in your put_super() you can then call journal_destroy()
+to clean up your in-core journal object.
+</para>
+
+<para>
+Unfortunately there a couple of ways the journal layer can cause a deadlock.
+The first thing to note is that each task can only have
+a single outstanding transaction at any one time, remember nothing
+commits until the outermost journal_stop(). This means
+you must complete the transaction at the end of each file/inode/address
+etc. operation you perform, so that the journalling system isn't re-entered
+on another journal. Since transactions can't be nested/batched
+across differing journals, and another filesystem other than
+yours (say ext3) may be modified in a later syscall.
+</para>
+
+<para>
+The second case to bear in mind is that journal_start() can
+block if there isn't enough space in the journal for your transaction
+(based on the passed nblocks param) - when it blocks it merely(!) needs to
+wait for transactions to complete and be committed from other tasks,
+so essentially we are waiting for journal_stop(). So to avoid
+deadlocks you must treat journal_start/stop() as if they
+were semaphores and include them in your semaphore ordering rules to prevent
+deadlocks. Note that journal_extend() has similar blocking behaviour to
+journal_start() so you can deadlock here just as easily as on journal_start().
+</para>
+
+<para>
+Try to reserve the right number of blocks the first time. ;-). This will
+be the maximum number of blocks you are going to touch in this transaction.
+I advise having a look at at least ext3_jbd.h to see the basis on which
+ext3 uses to make these decisions.
+</para>
+
+<para>
+Another wriggle to watch out for is your on-disk block allocation strategy.
+why? Because, if you undo a delete, you need to ensure you haven't reused any
+of the freed blocks in a later transaction. One simple way of doing this
+is make sure any blocks you allocate only have checkpointed transactions
+listed against them. Ext3 does this in ext3_test_allocatable().
+</para>
+
+<para>
+Lock is also providing through journal_{un,}lock_updates(),
+ext3 uses this when it wants a window with a clean and stable fs for a moment.
+eg.
+</para>
+
+<programlisting>
+
+	journal_lock_updates() //stop new stuff happening..
+	journal_flush()        // checkpoint everything.
+	..do stuff on stable fs
+	journal_unlock_updates() // carry on with filesystem use.
+</programlisting>
+
+<para>
+The opportunities for abuse and DOS attacks with this should be obvious,
+if you allow unprivileged userspace to trigger codepaths containing these
+calls.
+</para>
+
+<para>
+A new feature of jbd since 2.5.25 is commit callbacks with the new
+journal_callback_set() function you can now ask the journalling layer
+to call you back when the transaction is finally committed to disk, so that
+you can do some of your own management. The key to this is the journal_callback
+struct, this maintains the internal callback information but you can
+extend it like this:-
+</para>
+<programlisting>
+	struct  myfs_callback_s {
+		//Data structure element required by jbd..
+		struct journal_callback for_jbd;
+		// Stuff for myfs allocated together.
+		myfs_inode*    i_commited;
+
+	}
+</programlisting>
+
+<para>
+this would be useful if you needed to know when data was committed to a
+particular inode.
+</para>
+
+    </sect2>
+
+    <sect2 id="jbd_summary">
+     <title>Summary</title>
+<para>
+Using the journal is a matter of wrapping the different context changes,
+being each mount, each modification (transaction) and each changed buffer
+to tell the journalling layer about them.
+</para>
+
+<para>
+Here is a some pseudo code to give you an idea of how it works, as
+an example.
+</para>
+
+<programlisting>
+  journal_t* my_jnrl = journal_create();
+  journal_init_{dev,inode}(jnrl,...)
+  if (clean) journal_wipe();
+  journal_load();
+
+   foreach(transaction) { /*transactions must be
+                            completed before
+                            a syscall returns to
+                            userspace*/
+
+          handle_t * xct=journal_start(my_jnrl);
+          foreach(bh) {
+                journal_get_{create,write,undo}_access(xact,bh);
+                if ( myfs_modify(bh) ) { /* returns true
+                                        if makes changes */
+                           journal_dirty_{meta,}data(xact,bh);
+                } else {
+                           journal_forget(bh);
+                }
+          }
+          journal_stop(xct);
+   }
+   journal_destroy(my_jrnl);
+</programlisting>
+    </sect2>
+
+    </sect1>
+
+    <sect1 id="data_types">
+     <title>Data Types</title>
+     <para>
+	The journalling layer uses typedefs to 'hide' the concrete definitions
+	of the structures used. As a client of the JBD layer you can
+	just rely on the using the pointer as a magic cookie  of some sort.
+
+	Obviously the hiding is not enforced as this is 'C'.
+     </para>
+	<sect2 id="structures"><title>Structures</title>
+!Iinclude/linux/jbd.h
+	</sect2>
+    </sect1>
+
+    <sect1 id="functions">
+     <title>Functions</title>
+     <para>
+	The functions here are split into two groups those that
+	affect a journal as a whole, and those which are used to
+	manage transactions
+     </para>
+	<sect2 id="journal_level"><title>Journal Level</title>
+!Efs/jbd/journal.c
+!Ifs/jbd/recovery.c
+	</sect2>
+	<sect2 id="transaction_level"><title>Transasction Level</title>
+!Efs/jbd/transaction.c
+	</sect2>
+    </sect1>
+    <sect1 id="see_also">
+     <title>See also</title>
+	<para>
+	  <citation>
+	   <ulink url="http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz">
+	   	Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
+	   </ulink>
+	  </citation>
+	</para>
+	<para>
+	   <citation>
+	   <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
+	   	Ext3 Journalling FileSystem, OLS 2000, Dr. Stephen Tweedie
+	   </ulink>
+	   </citation>
+	</para>
+    </sect1>
+
+  </chapter>
+
+  <chapter id="splice">
+      <title>splice API</title>
+  <para>
+	splice is a method for moving blocks of data around inside the
+	kernel, without continually transferring them between the kernel
+	and user space.
+  </para>
+!Ffs/splice.c
+  </chapter>
+
+  <chapter id="pipes">
+      <title>pipes API</title>
+  <para>
+	Pipe interfaces are all for in-kernel (builtin image) use.
+	They are not exported for use by modules.
+  </para>
+!Iinclude/linux/pipe_fs_i.h
+!Ffs/pipe.c
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/gadget.tmpl

diff --git a/linux-imx/Documentation/DocBook/gadget.tmpl b/linux-imx/Documentation/DocBook/gadget.tmpl
new file mode 100644
index 0000000..4017f14
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/gadget.tmpl
@@ -0,0 +1,793 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="USB-Gadget-API">
+  <bookinfo>
+    <title>USB Gadget API for Linux</title>
+    <date>20 August 2004</date>
+    <edition>20 August 2004</edition>
+  
+    <legalnotice>
+       <para>
+	 This documentation is free software; you can redistribute
+	 it and/or modify it under the terms of the GNU General Public
+	 License as published by the Free Software Foundation; either
+	 version 2 of the License, or (at your option) any later
+	 version.
+       </para>
+	  
+       <para>
+	 This program is distributed in the hope that it will be
+	 useful, but WITHOUT ANY WARRANTY; without even the implied
+	 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	 See the GNU General Public License for more details.
+       </para>
+	  
+       <para>
+	 You should have received a copy of the GNU General Public
+	 License along with this program; if not, write to the Free
+	 Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+	 MA 02111-1307 USA
+       </para>
+	  
+       <para>
+	 For more details see the file COPYING in the source
+	 distribution of Linux.
+       </para>
+    </legalnotice>
+    <copyright>
+      <year>2003-2004</year>
+      <holder>David Brownell</holder>
+    </copyright>
+
+    <author>
+      <firstname>David</firstname> 
+      <surname>Brownell</surname>
+      <affiliation>
+        <address><email>dbrownell@users.sourceforge.net</email></address>
+      </affiliation>
+    </author>
+  </bookinfo>
+
+<toc></toc>
+
+<chapter id="intro"><title>Introduction</title>
+
+<para>This document presents a Linux-USB "Gadget"
+kernel mode
+API, for use within peripherals and other USB devices
+that embed Linux.
+It provides an overview of the API structure,
+and shows how that fits into a system development project.
+This is the first such API released on Linux to address
+a number of important problems, including: </para>
+
+<itemizedlist>
+    <listitem><para>Supports USB 2.0, for high speed devices which
+	can stream data at several dozen megabytes per second.
+	</para></listitem>
+    <listitem><para>Handles devices with dozens of endpoints just as
+	well as ones with just two fixed-function ones.  Gadget drivers
+	can be written so they're easy to port to new hardware.
+	</para></listitem>
+    <listitem><para>Flexible enough to expose more complex USB device
+	capabilities such as multiple configurations, multiple interfaces,
+	composite devices,
+	and alternate interface settings.
+	</para></listitem>
+    <listitem><para>USB "On-The-Go" (OTG) support, in conjunction
+	with updates to the Linux-USB host side.
+	</para></listitem>
+    <listitem><para>Sharing data structures and API models with the
+	Linux-USB host side API.  This helps the OTG support, and
+	looks forward to more-symmetric frameworks (where the same
+	I/O model is used by both host and device side drivers).
+	</para></listitem>
+    <listitem><para>Minimalist, so it's easier to support new device
+	controller hardware.  I/O processing doesn't imply large
+	demands for memory or CPU resources.
+	</para></listitem>
+</itemizedlist>
+
+
+<para>Most Linux developers will not be able to use this API, since they
+have USB "host" hardware in a PC, workstation, or server.
+Linux users with embedded systems are more likely to
+have USB peripheral hardware.
+To distinguish drivers running inside such hardware from the
+more familiar Linux "USB device drivers",
+which are host side proxies for the real USB devices,
+a different term is used:
+the drivers inside the peripherals are "USB gadget drivers".
+In USB protocol interactions, the device driver is the master
+(or "client driver")
+and the gadget driver is the slave (or "function driver").
+</para>
+
+<para>The gadget API resembles the host side Linux-USB API in that both
+use queues of request objects to package I/O buffers, and those requests
+may be submitted or canceled.
+They share common definitions for the standard USB
+<emphasis>Chapter 9</emphasis> messages, structures, and constants.
+Also, both APIs bind and unbind drivers to devices.
+The APIs differ in detail, since the host side's current
+URB framework exposes a number of implementation details
+and assumptions that are inappropriate for a gadget API.
+While the model for control transfers and configuration
+management is necessarily different (one side is a hardware-neutral master,
+the other is a hardware-aware slave), the endpoint I/0 API used here
+should also be usable for an overhead-reduced host side API.
+</para>
+
+</chapter>
+
+<chapter id="structure"><title>Structure of Gadget Drivers</title>
+
+<para>A system running inside a USB peripheral
+normally has at least three layers inside the kernel to handle
+USB protocol processing, and may have additional layers in
+user space code.
+The "gadget" API is used by the middle layer to interact
+with the lowest level (which directly handles hardware).
+</para>
+
+<para>In Linux, from the bottom up, these layers are:
+</para>
+
+<variablelist>
+
+    <varlistentry>
+        <term><emphasis>USB Controller Driver</emphasis></term>
+
+	<listitem>
+	<para>This is the lowest software level.
+	It is the only layer that talks to hardware,
+	through registers, fifos, dma, irqs, and the like.
+	The <filename>&lt;linux/usb/gadget.h&gt;</filename> API abstracts
+	the peripheral controller endpoint hardware.
+	That hardware is exposed through endpoint objects, which accept
+	streams of IN/OUT buffers, and through callbacks that interact
+	with gadget drivers.
+	Since normal USB devices only have one upstream
+	port, they only have one of these drivers.
+	The controller driver can support any number of different
+	gadget drivers, but only one of them can be used at a time.
+	</para>
+
+	<para>Examples of such controller hardware include
+	the PCI-based NetChip 2280 USB 2.0 high speed controller,
+	the SA-11x0 or PXA-25x UDC (found within many PDAs),
+	and a variety of other products.
+	</para>
+
+	</listitem></varlistentry>
+
+    <varlistentry>
+	<term><emphasis>Gadget Driver</emphasis></term>
+
+	<listitem>
+	<para>The lower boundary of this driver implements hardware-neutral
+	USB functions, using calls to the controller driver.
+	Because such hardware varies widely in capabilities and restrictions,
+	and is used in embedded environments where space is at a premium,
+	the gadget driver is often configured at compile time
+	to work with endpoints supported by one particular controller.
+	Gadget drivers may be portable to several different controllers,
+	using conditional compilation.
+	(Recent kernels substantially simplify the work involved in
+	supporting new hardware, by <emphasis>autoconfiguring</emphasis>
+	endpoints automatically for many bulk-oriented drivers.)
+	Gadget driver responsibilities include:
+	</para>
+	<itemizedlist>
+	    <listitem><para>handling setup requests (ep0 protocol responses)
+		possibly including class-specific functionality
+		</para></listitem>
+	    <listitem><para>returning configuration and string descriptors
+		</para></listitem>
+	    <listitem><para>(re)setting configurations and interface
+		altsettings, including enabling and configuring endpoints
+		</para></listitem>
+	    <listitem><para>handling life cycle events, such as managing
+		bindings to hardware,
+		USB suspend/resume, remote wakeup,
+		and disconnection from the USB host.
+		</para></listitem>
+	    <listitem><para>managing IN and OUT transfers on all currently
+		enabled endpoints
+		</para></listitem>
+	</itemizedlist>
+
+	<para>
+	Such drivers may be modules of proprietary code, although
+	that approach is discouraged in the Linux community.
+	</para>
+	</listitem></varlistentry>
+
+    <varlistentry>
+	<term><emphasis>Upper Level</emphasis></term>
+
+	<listitem>
+	<para>Most gadget drivers have an upper boundary that connects
+	to some Linux driver or framework in Linux.
+	Through that boundary flows the data which the gadget driver
+	produces and/or consumes through protocol transfers over USB.
+	Examples include:
+	</para>
+	<itemizedlist>
+	    <listitem><para>user mode code, using generic (gadgetfs)
+	        or application specific files in
+		<filename>/dev</filename>
+		</para></listitem>
+	    <listitem><para>networking subsystem (for network gadgets,
+		like the CDC Ethernet Model gadget driver)
+		</para></listitem>
+	    <listitem><para>data capture drivers, perhaps video4Linux or
+		 a scanner driver; or test and measurement hardware.
+		 </para></listitem>
+	    <listitem><para>input subsystem (for HID gadgets)
+		</para></listitem>
+	    <listitem><para>sound subsystem (for audio gadgets)
+		</para></listitem>
+	    <listitem><para>file system (for PTP gadgets)
+		</para></listitem>
+	    <listitem><para>block i/o subsystem (for usb-storage gadgets)
+		</para></listitem>
+	    <listitem><para>... and more </para></listitem>
+	</itemizedlist>
+	</listitem></varlistentry>
+
+    <varlistentry>
+	<term><emphasis>Additional Layers</emphasis></term>
+
+	<listitem>
+	<para>Other layers may exist.
+	These could include kernel layers, such as network protocol stacks,
+	as well as user mode applications building on standard POSIX
+	system call APIs such as
+	<emphasis>open()</emphasis>, <emphasis>close()</emphasis>,
+	<emphasis>read()</emphasis> and <emphasis>write()</emphasis>.
+	On newer systems, POSIX Async I/O calls may be an option.
+	Such user mode code will not necessarily be subject to
+	the GNU General Public License (GPL).
+	</para>
+	</listitem></varlistentry>
+
+
+</variablelist>
+
+<para>OTG-capable systems will also need to include a standard Linux-USB
+host side stack,
+with <emphasis>usbcore</emphasis>,
+one or more <emphasis>Host Controller Drivers</emphasis> (HCDs),
+<emphasis>USB Device Drivers</emphasis> to support
+the OTG "Targeted Peripheral List",
+and so forth.
+There will also be an <emphasis>OTG Controller Driver</emphasis>,
+which is visible to gadget and device driver developers only indirectly.
+That helps the host and device side USB controllers implement the
+two new OTG protocols (HNP and SRP).
+Roles switch (host to peripheral, or vice versa) using HNP
+during USB suspend processing, and SRP can be viewed as a
+more battery-friendly kind of device wakeup protocol.
+</para>
+
+<para>Over time, reusable utilities are evolving to help make some
+gadget driver tasks simpler.
+For example, building configuration descriptors from vectors of
+descriptors for the configurations interfaces and endpoints is
+now automated, and many drivers now use autoconfiguration to
+choose hardware endpoints and initialize their descriptors.
+
+A potential example of particular interest
+is code implementing standard USB-IF protocols for
+HID, networking, storage, or audio classes.
+Some developers are interested in KDB or KGDB hooks, to let
+target hardware be remotely debugged.
+Most such USB protocol code doesn't need to be hardware-specific,
+any more than network protocols like X11, HTTP, or NFS are.
+Such gadget-side interface drivers should eventually be combined,
+to implement composite devices.
+</para>
+
+</chapter>
+
+
+<chapter id="api"><title>Kernel Mode Gadget API</title>
+
+<para>Gadget drivers declare themselves through a
+<emphasis>struct usb_gadget_driver</emphasis>, which is responsible for
+most parts of enumeration for a <emphasis>struct usb_gadget</emphasis>.
+The response to a set_configuration usually involves
+enabling one or more of the <emphasis>struct usb_ep</emphasis> objects
+exposed by the gadget, and submitting one or more
+<emphasis>struct usb_request</emphasis> buffers to transfer data.
+Understand those four data types, and their operations, and
+you will understand how this API works.
+</para> 
+
+<note><title>Incomplete Data Type Descriptions</title>
+
+<para>This documentation was prepared using the standard Linux
+kernel <filename>docproc</filename> tool, which turns text
+and in-code comments into SGML DocBook and then into usable
+formats such as HTML or PDF.
+Other than the "Chapter 9" data types, most of the significant
+data types and functions are described here.
+</para>
+
+<para>However, docproc does not understand all the C constructs
+that are used, so some relevant information is likely omitted from
+what you are reading.  
+One example of such information is endpoint autoconfiguration.
+You'll have to read the header file, and use example source
+code (such as that for "Gadget Zero"), to fully understand the API.
+</para>
+
+<para>The part of the API implementing some basic
+driver capabilities is specific to the version of the
+Linux kernel that's in use.
+The 2.6 kernel includes a <emphasis>driver model</emphasis>
+framework that has no analogue on earlier kernels;
+so those parts of the gadget API are not fully portable.
+(They are implemented on 2.4 kernels, but in a different way.)
+The driver model state is another part of this API that is
+ignored by the kerneldoc tools.
+</para>
+</note>
+
+<para>The core API does not expose
+every possible hardware feature, only the most widely available ones.
+There are significant hardware features, such as device-to-device DMA
+(without temporary storage in a memory buffer)
+that would be added using hardware-specific APIs.
+</para>
+
+<para>This API allows drivers to use conditional compilation to handle
+endpoint capabilities of different hardware, but doesn't require that.
+Hardware tends to have arbitrary restrictions, relating to
+transfer types, addressing, packet sizes, buffering, and availability.
+As a rule, such differences only matter for "endpoint zero" logic
+that handles device configuration and management.
+The API supports limited run-time
+detection of capabilities, through naming conventions for endpoints.
+Many drivers will be able to at least partially autoconfigure
+themselves.
+In particular, driver init sections will often have endpoint
+autoconfiguration logic that scans the hardware's list of endpoints
+to find ones matching the driver requirements
+(relying on those conventions), to eliminate some of the most
+common reasons for conditional compilation.
+</para>
+
+<para>Like the Linux-USB host side API, this API exposes
+the "chunky" nature of USB messages:  I/O requests are in terms
+of one or more "packets", and packet boundaries are visible to drivers.
+Compared to RS-232 serial protocols, USB resembles
+synchronous protocols like HDLC
+(N bytes per frame, multipoint addressing, host as the primary
+station and devices as secondary stations)
+more than asynchronous ones
+(tty style:  8 data bits per frame, no parity, one stop bit).
+So for example the controller drivers won't buffer
+two single byte writes into a single two-byte USB IN packet,
+although gadget drivers may do so when they implement
+protocols where packet boundaries (and "short packets")
+are not significant.
+</para>
+
+<sect1 id="lifecycle"><title>Driver Life Cycle</title>
+
+<para>Gadget drivers make endpoint I/O requests to hardware without
+needing to know many details of the hardware, but driver
+setup/configuration code needs to handle some differences.
+Use the API like this:
+</para>
+
+<orderedlist numeration='arabic'>
+
+<listitem><para>Register a driver for the particular device side
+usb controller hardware,
+such as the net2280 on PCI (USB 2.0),
+sa11x0 or pxa25x as found in Linux PDAs,
+and so on.
+At this point the device is logically in the USB ch9 initial state
+("attached"), drawing no power and not usable
+(since it does not yet support enumeration).
+Any host should not see the device, since it's not
+activated the data line pullup used by the host to
+detect a device, even if VBUS power is available.
+</para></listitem>
+
+<listitem><para>Register a gadget driver that implements some higher level
+device function.  That will then bind() to a usb_gadget, which
+activates the data line pullup sometime after detecting VBUS.
+</para></listitem>
+
+<listitem><para>The hardware driver can now start enumerating.
+The steps it handles are to accept USB power and set_address requests.
+Other steps are handled by the gadget driver.
+If the gadget driver module is unloaded before the host starts to
+enumerate, steps before step 7 are skipped.
+</para></listitem>
+
+<listitem><para>The gadget driver's setup() call returns usb descriptors,
+based both on what the bus interface hardware provides and on the
+functionality being implemented.
+That can involve alternate settings or configurations,
+unless the hardware prevents such operation.
+For OTG devices, each configuration descriptor includes
+an OTG descriptor.
+</para></listitem>
+
+<listitem><para>The gadget driver handles the last step of enumeration,
+when the USB host issues a set_configuration call.
+It enables all endpoints used in that configuration,
+with all interfaces in their default settings.
+That involves using a list of the hardware's endpoints, enabling each
+endpoint according to its descriptor.
+It may also involve using <function>usb_gadget_vbus_draw</function>
+to let more power be drawn from VBUS, as allowed by that configuration.
+For OTG devices, setting a configuration may also involve reporting
+HNP capabilities through a user interface.
+</para></listitem>
+
+<listitem><para>Do real work and perform data transfers, possibly involving
+changes to interface settings or switching to new configurations, until the
+device is disconnect()ed from the host.
+Queue any number of transfer requests to each endpoint.
+It may be suspended and resumed several times before being disconnected.
+On disconnect, the drivers go back to step 3 (above).
+</para></listitem>
+
+<listitem><para>When the gadget driver module is being unloaded,
+the driver unbind() callback is issued.  That lets the controller
+driver be unloaded.
+</para></listitem>
+
+</orderedlist>
+
+<para>Drivers will normally be arranged so that just loading the
+gadget driver module (or statically linking it into a Linux kernel)
+allows the peripheral device to be enumerated, but some drivers
+will defer enumeration until some higher level component (like
+a user mode daemon) enables it.
+Note that at this lowest level there are no policies about how
+ep0 configuration logic is implemented,
+except that it should obey USB specifications.
+Such issues are in the domain of gadget drivers,
+including knowing about implementation constraints
+imposed by some USB controllers
+or understanding that composite devices might happen to
+be built by integrating reusable components.
+</para>
+
+<para>Note that the lifecycle above can be slightly different
+for OTG devices.
+Other than providing an additional OTG descriptor in each
+configuration, only the HNP-related differences are particularly
+visible to driver code.
+They involve reporting requirements during the SET_CONFIGURATION
+request, and the option to invoke HNP during some suspend callbacks.
+Also, SRP changes the semantics of
+<function>usb_gadget_wakeup</function>
+slightly.
+</para>
+
+</sect1>
+
+<sect1 id="ch9"><title>USB 2.0 Chapter 9 Types and Constants</title>
+
+<para>Gadget drivers
+rely on common USB structures and constants
+defined in the
+<filename>&lt;linux/usb/ch9.h&gt;</filename>
+header file, which is standard in Linux 2.6 kernels.
+These are the same types and constants used by host
+side drivers (and usbcore).
+</para>
+
+!Iinclude/linux/usb/ch9.h
+</sect1>
+
+<sect1 id="core"><title>Core Objects and Methods</title>
+
+<para>These are declared in
+<filename>&lt;linux/usb/gadget.h&gt;</filename>,
+and are used by gadget drivers to interact with
+USB peripheral controller drivers.
+</para>
+
+	<!-- yeech, this is ugly in nsgmls PDF output.
+
+	     the PDF bookmark and refentry output nesting is wrong,
+	     and the member/argument documentation indents ugly.
+
+	     plus something (docproc?) adds whitespace before the
+	     descriptive paragraph text, so it can't line up right
+	     unless the explanations are trivial.
+	  -->
+
+!Iinclude/linux/usb/gadget.h
+</sect1>
+
+<sect1 id="utils"><title>Optional Utilities</title>
+
+<para>The core API is sufficient for writing a USB Gadget Driver,
+but some optional utilities are provided to simplify common tasks.
+These utilities include endpoint autoconfiguration.
+</para>
+
+!Edrivers/usb/gadget/usbstring.c
+!Edrivers/usb/gadget/config.c
+<!-- !Edrivers/usb/gadget/epautoconf.c -->
+</sect1>
+
+<sect1 id="composite"><title>Composite Device Framework</title>
+
+<para>The core API is sufficient for writing drivers for composite
+USB devices (with more than one function in a given configuration),
+and also multi-configuration devices (also more than one function,
+but not necessarily sharing a given configuration).
+There is however an optional framework which makes it easier to
+reuse and combine functions.
+</para>
+
+<para>Devices using this framework provide a <emphasis>struct
+usb_composite_driver</emphasis>, which in turn provides one or
+more <emphasis>struct usb_configuration</emphasis> instances.
+Each such configuration includes at least one
+<emphasis>struct usb_function</emphasis>, which packages a user
+visible role such as "network link" or "mass storage device".
+Management functions may also exist, such as "Device Firmware
+Upgrade".
+</para>
+
+!Iinclude/linux/usb/composite.h
+!Edrivers/usb/gadget/composite.c
+
+</sect1>
+
+<sect1 id="functions"><title>Composite Device Functions</title>
+
+<para>At this writing, a few of the current gadget drivers have
+been converted to this framework.
+Near-term plans include converting all of them, except for "gadgetfs".
+</para>
+
+!Edrivers/usb/gadget/f_acm.c
+!Edrivers/usb/gadget/f_ecm.c
+!Edrivers/usb/gadget/f_subset.c
+!Edrivers/usb/gadget/f_obex.c
+!Edrivers/usb/gadget/f_serial.c
+
+</sect1>
+
+
+</chapter>
+
+<chapter id="controllers"><title>Peripheral Controller Drivers</title>
+
+<para>The first hardware supporting this API was the NetChip 2280
+controller, which supports USB 2.0 high speed and is based on PCI.
+This is the <filename>net2280</filename> driver module.
+The driver supports Linux kernel versions 2.4 and 2.6;
+contact NetChip Technologies for development boards and product
+information.
+</para> 
+
+<para>Other hardware working in the "gadget" framework includes:
+Intel's PXA 25x and IXP42x series processors
+(<filename>pxa2xx_udc</filename>),
+Toshiba TC86c001 "Goku-S" (<filename>goku_udc</filename>),
+Renesas SH7705/7727 (<filename>sh_udc</filename>),
+MediaQ 11xx (<filename>mq11xx_udc</filename>),
+Hynix HMS30C7202 (<filename>h7202_udc</filename>),
+National 9303/4 (<filename>n9604_udc</filename>),
+Texas Instruments OMAP (<filename>omap_udc</filename>),
+Sharp LH7A40x (<filename>lh7a40x_udc</filename>),
+and more.
+Most of those are full speed controllers.
+</para>
+
+<para>At this writing, there are people at work on drivers in
+this framework for several other USB device controllers,
+with plans to make many of them be widely available.
+</para>
+
+<!-- !Edrivers/usb/gadget/net2280.c -->
+
+<para>A partial USB simulator,
+the <filename>dummy_hcd</filename> driver, is available.
+It can act like a net2280, a pxa25x, or an sa11x0 in terms
+of available endpoints and device speeds; and it simulates
+control, bulk, and to some extent interrupt transfers.
+That lets you develop some parts of a gadget driver on a normal PC,
+without any special hardware, and perhaps with the assistance
+of tools such as GDB running with User Mode Linux.
+At least one person has expressed interest in adapting that
+approach, hooking it up to a simulator for a microcontroller.
+Such simulators can help debug subsystems where the runtime hardware
+is unfriendly to software development, or is not yet available.
+</para>
+
+<para>Support for other controllers is expected to be developed
+and contributed
+over time, as this driver framework evolves.
+</para>
+
+</chapter>
+
+<chapter id="gadget"><title>Gadget Drivers</title>
+
+<para>In addition to <emphasis>Gadget Zero</emphasis>
+(used primarily for testing and development with drivers
+for usb controller hardware), other gadget drivers exist.
+</para>
+
+<para>There's an <emphasis>ethernet</emphasis> gadget
+driver, which implements one of the most useful
+<emphasis>Communications Device Class</emphasis> (CDC) models.  
+One of the standards for cable modem interoperability even
+specifies the use of this ethernet model as one of two
+mandatory options.
+Gadgets using this code look to a USB host as if they're
+an Ethernet adapter.
+It provides access to a network where the gadget's CPU is one host,
+which could easily be bridging, routing, or firewalling
+access to other networks.
+Since some hardware can't fully implement the CDC Ethernet
+requirements, this driver also implements a "good parts only"
+subset of CDC Ethernet.
+(That subset doesn't advertise itself as CDC Ethernet,
+to avoid creating problems.)
+</para>
+
+<para>Support for Microsoft's <emphasis>RNDIS</emphasis>
+protocol has been contributed by Pengutronix and Auerswald GmbH.
+This is like CDC Ethernet, but it runs on more slightly USB hardware
+(but less than the CDC subset).
+However, its main claim to fame is being able to connect directly to
+recent versions of Windows, using drivers that Microsoft bundles
+and supports, making it much simpler to network with Windows.
+</para>
+
+<para>There is also support for user mode gadget drivers,
+using <emphasis>gadgetfs</emphasis>.
+This provides a <emphasis>User Mode API</emphasis> that presents
+each endpoint as a single file descriptor.  I/O is done using
+normal <emphasis>read()</emphasis> and <emphasis>read()</emphasis> calls.
+Familiar tools like GDB and pthreads can be used to
+develop and debug user mode drivers, so that once a robust
+controller driver is available many applications for it
+won't require new kernel mode software.
+Linux 2.6 <emphasis>Async I/O (AIO)</emphasis>
+support is available, so that user mode software
+can stream data with only slightly more overhead
+than a kernel driver.
+</para>
+
+<para>There's a USB Mass Storage class driver, which provides
+a different solution for interoperability with systems such
+as MS-Windows and MacOS.
+That <emphasis>Mass Storage</emphasis> driver uses a
+file or block device as backing store for a drive,
+like the <filename>loop</filename> driver.
+The USB host uses the BBB, CB, or CBI versions of the mass
+storage class specification, using transparent SCSI commands
+to access the data from the backing store.
+</para>
+
+<para>There's a "serial line" driver, useful for TTY style
+operation over USB.
+The latest version of that driver supports CDC ACM style
+operation, like a USB modem, and so on most hardware it can
+interoperate easily with MS-Windows.
+One interesting use of that driver is in boot firmware (like a BIOS),
+which can sometimes use that model with very small systems without
+real serial lines.
+</para>
+
+<para>Support for other kinds of gadget is expected to
+be developed and contributed
+over time, as this driver framework evolves.
+</para>
+
+</chapter>
+
+<chapter id="otg"><title>USB On-The-GO (OTG)</title>
+
+<para>USB OTG support on Linux 2.6 was initially developed
+by Texas Instruments for
+<ulink url="http://www.omap.com">OMAP</ulink> 16xx and 17xx
+series processors.
+Other OTG systems should work in similar ways, but the
+hardware level details could be very different.
+</para> 
+
+<para>Systems need specialized hardware support to implement OTG,
+notably including a special <emphasis>Mini-AB</emphasis> jack
+and associated transciever to support <emphasis>Dual-Role</emphasis>
+operation:
+they can act either as a host, using the standard
+Linux-USB host side driver stack,
+or as a peripheral, using this "gadget" framework.
+To do that, the system software relies on small additions
+to those programming interfaces,
+and on a new internal component (here called an "OTG Controller")
+affecting which driver stack connects to the OTG port.
+In each role, the system can re-use the existing pool of
+hardware-neutral drivers, layered on top of the controller
+driver interfaces (<emphasis>usb_bus</emphasis> or
+<emphasis>usb_gadget</emphasis>).
+Such drivers need at most minor changes, and most of the calls
+added to support OTG can also benefit non-OTG products.
+</para>
+
+<itemizedlist>
+    <listitem><para>Gadget drivers test the <emphasis>is_otg</emphasis>
+	flag, and use it to determine whether or not to include
+	an OTG descriptor in each of their configurations.
+	</para></listitem>
+    <listitem><para>Gadget drivers may need changes to support the
+	two new OTG protocols, exposed in new gadget attributes
+	such as <emphasis>b_hnp_enable</emphasis> flag.
+	HNP support should be reported through a user interface
+	(two LEDs could suffice), and is triggered in some cases
+	when the host suspends the peripheral.
+	SRP support can be user-initiated just like remote wakeup,
+	probably by pressing the same button.
+	</para></listitem>
+    <listitem><para>On the host side, USB device drivers need
+	to be taught to trigger HNP at appropriate moments, using
+	<function>usb_suspend_device()</function>.
+	That also conserves battery power, which is useful even
+	for non-OTG configurations.
+	</para></listitem>
+    <listitem><para>Also on the host side, a driver must support the
+	OTG "Targeted Peripheral List".  That's just a whitelist,
+	used to reject peripherals not supported with a given
+	Linux OTG host.
+	<emphasis>This whitelist is product-specific;
+	each product must modify <filename>otg_whitelist.h</filename>
+	to match its interoperability specification.
+	</emphasis>
+	</para>
+	<para>Non-OTG Linux hosts, like PCs and workstations,
+	normally have some solution for adding drivers, so that
+	peripherals that aren't recognized can eventually be supported.
+	That approach is unreasonable for consumer products that may
+	never have their firmware upgraded, and where it's usually
+	unrealistic to expect traditional PC/workstation/server kinds
+	of support model to work.
+	For example, it's often impractical to change device firmware
+	once the product has been distributed, so driver bugs can't
+	normally be fixed if they're found after shipment.
+	</para></listitem>
+</itemizedlist>
+
+<para>
+Additional changes are needed below those hardware-neutral
+<emphasis>usb_bus</emphasis> and <emphasis>usb_gadget</emphasis>
+driver interfaces; those aren't discussed here in any detail.
+Those affect the hardware-specific code for each USB Host or Peripheral
+controller, and how the HCD initializes (since OTG can be active only
+on a single port).
+They also involve what may be called an <emphasis>OTG Controller
+Driver</emphasis>, managing the OTG transceiver and the OTG state
+machine logic as well as much of the root hub behavior for the
+OTG port.
+The OTG controller driver needs to activate and deactivate USB
+controllers depending on the relevant device role.
+Some related changes were needed inside usbcore, so that it
+can identify OTG-capable devices and respond appropriately
+to HNP or SRP protocols.
+</para> 
+
+</chapter>
+
+</book>
+<!--
+	vim:syntax=sgml:sw=4
+-->

linux-imx/Documentation/DocBook/genericirq.tmpl

diff --git a/linux-imx/Documentation/DocBook/genericirq.tmpl b/linux-imx/Documentation/DocBook/genericirq.tmpl
new file mode 100644
index 0000000..b342234
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/genericirq.tmpl
@@ -0,0 +1,507 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Generic-IRQ-Guide">
+ <bookinfo>
+  <title>Linux generic IRQ handling</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Thomas</firstname>
+    <surname>Gleixner</surname>
+    <affiliation>
+     <address>
+      <email>tglx@linutronix.de</email>
+     </address>
+    </affiliation>
+   </author>
+   <author>
+    <firstname>Ingo</firstname>
+    <surname>Molnar</surname>
+    <affiliation>
+     <address>
+      <email>mingo@elte.hu</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2005-2010</year>
+   <holder>Thomas Gleixner</holder>
+  </copyright>
+  <copyright>
+   <year>2005-2006</year>
+   <holder>Ingo Molnar</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+    <title>Introduction</title>
+    <para>
+	The generic interrupt handling layer is designed to provide a
+	complete abstraction of interrupt handling for device drivers.
+	It is able to handle all the different types of interrupt controller
+	hardware. Device drivers use generic API functions to request, enable,
+	disable and free interrupts. The drivers do not have to know anything
+	about interrupt hardware details, so they can be used on different
+	platforms without code changes.
+    </para>
+    <para>
+  	This documentation is provided to developers who want to implement
+	an interrupt subsystem based for their architecture, with the help
+	of the generic IRQ handling layer.
+    </para>
+  </chapter>
+
+  <chapter id="rationale">
+    <title>Rationale</title>
+	<para>
+	The original implementation of interrupt handling in Linux is using
+	the __do_IRQ() super-handler, which is able to deal with every
+	type of interrupt logic.
+	</para>
+	<para>
+	Originally, Russell King identified different types of handlers to
+	build a quite universal set for the ARM interrupt handler
+	implementation in Linux 2.5/2.6. He distinguished between:
+	<itemizedlist>
+	  <listitem><para>Level type</para></listitem>
+	  <listitem><para>Edge type</para></listitem>
+	  <listitem><para>Simple type</para></listitem>
+	</itemizedlist>
+	During the implementation we identified another type:
+	<itemizedlist>
+	  <listitem><para>Fast EOI type</para></listitem>
+	</itemizedlist>
+	In the SMP world of the __do_IRQ() super-handler another type
+	was identified:
+	<itemizedlist>
+	  <listitem><para>Per CPU type</para></listitem>
+	</itemizedlist>
+	</para>
+	<para>
+	This split implementation of highlevel IRQ handlers allows us to
+	optimize the flow of the interrupt handling for each specific
+	interrupt type. This reduces complexity in that particular codepath
+	and allows the optimized handling of a given type.
+	</para>
+	<para>
+	The original general IRQ implementation used hw_interrupt_type
+	structures and their ->ack(), ->end() [etc.] callbacks to
+	differentiate the flow control in the super-handler. This leads to
+	a mix of flow logic and lowlevel hardware logic, and it also leads
+	to unnecessary code duplication: for example in i386, there is a
+	ioapic_level_irq and a ioapic_edge_irq irq-type which share many
+	of the lowlevel details but have different flow handling.
+	</para>
+	<para>
+	A more natural abstraction is the clean separation of the
+	'irq flow' and the 'chip details'.
+	</para>
+	<para>
+	Analysing a couple of architecture's IRQ subsystem implementations
+	reveals that most of them can use a generic set of 'irq flow'
+	methods and only need to add the chip level specific code.
+	The separation is also valuable for (sub)architectures
+	which need specific quirks in the irq flow itself but not in the
+	chip-details - and thus provides a more transparent IRQ subsystem
+	design.
+	</para>
+	<para>
+	Each interrupt descriptor is assigned its own highlevel flow
+	handler, which is normally one of the generic
+	implementations. (This highlevel flow handler implementation also
+	makes it simple to provide demultiplexing handlers which can be
+	found in embedded platforms on various architectures.)
+	</para>
+	<para>
+	The separation makes the generic interrupt handling layer more
+	flexible and extensible. For example, an (sub)architecture can
+	use a generic irq-flow implementation for 'level type' interrupts
+	and add a (sub)architecture specific 'edge type' implementation.
+	</para>
+	<para>
+	To make the transition to the new model easier and prevent the
+	breakage of existing implementations, the __do_IRQ() super-handler
+	is still available. This leads to a kind of duality for the time
+	being. Over time the new model should be used in more and more
+	architectures, as it enables smaller and cleaner IRQ subsystems.
+	It's deprecated for three years now and about to be removed.
+	</para>
+  </chapter>
+  <chapter id="bugs">
+    <title>Known Bugs And Assumptions</title>
+    <para>
+	None (knock on wood).
+    </para>
+  </chapter>
+
+  <chapter id="Abstraction">
+    <title>Abstraction layers</title>
+    <para>
+	There are three main levels of abstraction in the interrupt code:
+	<orderedlist>
+	  <listitem><para>Highlevel driver API</para></listitem>
+	  <listitem><para>Highlevel IRQ flow handlers</para></listitem>
+	  <listitem><para>Chiplevel hardware encapsulation</para></listitem>
+	</orderedlist>
+    </para>
+    <sect1 id="Interrupt_control_flow">
+	<title>Interrupt control flow</title>
+	<para>
+	Each interrupt is described by an interrupt descriptor structure
+	irq_desc. The interrupt is referenced by an 'unsigned int' numeric
+	value which selects the corresponding interrupt decription structure
+	in the descriptor structures array.
+	The descriptor structure contains status information and pointers
+	to the interrupt flow method and the interrupt chip structure
+	which are assigned to this interrupt.
+	</para>
+	<para>
+	Whenever an interrupt triggers, the lowlevel arch code calls into
+	the generic interrupt code by calling desc->handle_irq().
+	This highlevel IRQ handling function only uses desc->irq_data.chip
+	primitives referenced by the assigned chip descriptor structure.
+	</para>
+    </sect1>
+    <sect1 id="Highlevel_Driver_API">
+	<title>Highlevel Driver API</title>
+	<para>
+	  The highlevel Driver API consists of following functions:
+	  <itemizedlist>
+	  <listitem><para>request_irq()</para></listitem>
+	  <listitem><para>free_irq()</para></listitem>
+	  <listitem><para>disable_irq()</para></listitem>
+	  <listitem><para>enable_irq()</para></listitem>
+	  <listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
+	  <listitem><para>synchronize_irq() (SMP only)</para></listitem>
+	  <listitem><para>irq_set_irq_type()</para></listitem>
+	  <listitem><para>irq_set_irq_wake()</para></listitem>
+	  <listitem><para>irq_set_handler_data()</para></listitem>
+	  <listitem><para>irq_set_chip()</para></listitem>
+	  <listitem><para>irq_set_chip_data()</para></listitem>
+          </itemizedlist>
+	  See the autogenerated function documentation for details.
+	</para>
+    </sect1>
+    <sect1 id="Highlevel_IRQ_flow_handlers">
+	<title>Highlevel IRQ flow handlers</title>
+	<para>
+	  The generic layer provides a set of pre-defined irq-flow methods:
+	  <itemizedlist>
+	  <listitem><para>handle_level_irq</para></listitem>
+	  <listitem><para>handle_edge_irq</para></listitem>
+	  <listitem><para>handle_fasteoi_irq</para></listitem>
+	  <listitem><para>handle_simple_irq</para></listitem>
+	  <listitem><para>handle_percpu_irq</para></listitem>
+	  <listitem><para>handle_edge_eoi_irq</para></listitem>
+	  <listitem><para>handle_bad_irq</para></listitem>
+	  </itemizedlist>
+	  The interrupt flow handlers (either predefined or architecture
+	  specific) are assigned to specific interrupts by the architecture
+	  either during bootup or during device initialization.
+	</para>
+	<sect2 id="Default_flow_implementations">
+	<title>Default flow implementations</title>
+	    <sect3 id="Helper_functions">
+	 	<title>Helper functions</title>
+		<para>
+		The helper functions call the chip primitives and
+		are used by the default flow implementations.
+		The following helper functions are implemented (simplified excerpt):
+		<programlisting>
+default_enable(struct irq_data *data)
+{
+	desc->irq_data.chip->irq_unmask(data);
+}
+
+default_disable(struct irq_data *data)
+{
+	if (!delay_disable(data))
+		desc->irq_data.chip->irq_mask(data);
+}
+
+default_ack(struct irq_data *data)
+{
+	chip->irq_ack(data);
+}
+
+default_mask_ack(struct irq_data *data)
+{
+	if (chip->irq_mask_ack) {
+		chip->irq_mask_ack(data);
+	} else {
+		chip->irq_mask(data);
+		chip->irq_ack(data);
+	}
+}
+
+noop(struct irq_data *data))
+{
+}
+
+		</programlisting>
+	        </para>
+	    </sect3>
+	</sect2>
+	<sect2 id="Default_flow_handler_implementations">
+	<title>Default flow handler implementations</title>
+	    <sect3 id="Default_Level_IRQ_flow_handler">
+	 	<title>Default Level IRQ flow handler</title>
+		<para>
+		handle_level_irq provides a generic implementation
+		for level-triggered interrupts.
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+desc->irq_data.chip->irq_mask_ack();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_unmask();
+		</programlisting>
+		</para>
+	    </sect3>
+	    <sect3 id="Default_FASTEOI_IRQ_flow_handler">
+		<title>Default Fast EOI IRQ flow handler</title>
+		<para>
+		handle_fasteoi_irq provides a generic implementation
+		for interrupts, which only need an EOI at the end of
+		the handler
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_eoi();
+		</programlisting>
+		</para>
+	    </sect3>
+	    <sect3 id="Default_Edge_IRQ_flow_handler">
+	 	<title>Default Edge IRQ flow handler</title>
+		<para>
+		handle_edge_irq provides a generic implementation
+		for edge-triggered interrupts.
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+if (desc->status &amp; running) {
+	desc->irq_data.chip->irq_mask_ack();
+	desc->status |= pending | masked;
+	return;
+}
+desc->irq_data.chip->irq_ack();
+desc->status |= running;
+do {
+	if (desc->status &amp; masked)
+		desc->irq_data.chip->irq_unmask();
+	desc->status &amp;= ~pending;
+	handle_irq_event(desc->action);
+} while (status &amp; pending);
+desc->status &amp;= ~running;
+		</programlisting>
+		</para>
+   	    </sect3>
+	    <sect3 id="Default_simple_IRQ_flow_handler">
+	 	<title>Default simple IRQ flow handler</title>
+		<para>
+		handle_simple_irq provides a generic implementation
+		for simple interrupts.
+		</para>
+		<para>
+		Note: The simple flow handler does not call any
+		handler/chip primitives.
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+handle_irq_event(desc->action);
+		</programlisting>
+		</para>
+   	    </sect3>
+	    <sect3 id="Default_per_CPU_flow_handler">
+	 	<title>Default per CPU flow handler</title>
+		<para>
+		handle_percpu_irq provides a generic implementation
+		for per CPU interrupts.
+		</para>
+		<para>
+		Per CPU interrupts are only available on SMP and
+		the handler provides a simplified version without
+		locking.
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+if (desc->irq_data.chip->irq_ack)
+	desc->irq_data.chip->irq_ack();
+handle_irq_event(desc->action);
+if (desc->irq_data.chip->irq_eoi)
+        desc->irq_data.chip->irq_eoi();
+		</programlisting>
+		</para>
+   	    </sect3>
+	    <sect3 id="EOI_Edge_IRQ_flow_handler">
+	 	<title>EOI Edge IRQ flow handler</title>
+		<para>
+		handle_edge_eoi_irq provides an abnomination of the edge
+		handler which is solely used to tame a badly wreckaged
+		irq controller on powerpc/cell.
+		</para>
+   	    </sect3>
+	    <sect3 id="BAD_IRQ_flow_handler">
+	 	<title>Bad IRQ flow handler</title>
+		<para>
+		handle_bad_irq is used for spurious interrupts which
+		have no real handler assigned..
+		</para>
+   	    </sect3>
+	</sect2>
+	<sect2 id="Quirks_and_optimizations">
+	<title>Quirks and optimizations</title>
+	<para>
+	The generic functions are intended for 'clean' architectures and chips,
+	which have no platform-specific IRQ handling quirks. If an architecture
+	needs to implement quirks on the 'flow' level then it can do so by
+	overriding the highlevel irq-flow handler.
+	</para>
+	</sect2>
+	<sect2 id="Delayed_interrupt_disable">
+	<title>Delayed interrupt disable</title>
+	<para>
+	This per interrupt selectable feature, which was introduced by Russell
+	King in the ARM interrupt implementation, does not mask an interrupt
+	at the hardware level when disable_irq() is called. The interrupt is
+	kept enabled and is masked in the flow handler when an interrupt event
+	happens. This prevents losing edge interrupts on hardware which does
+	not store an edge interrupt event while the interrupt is disabled at
+	the hardware level. When an interrupt arrives while the IRQ_DISABLED
+	flag is set, then the interrupt is masked at the hardware level and
+	the IRQ_PENDING bit is set. When the interrupt is re-enabled by
+	enable_irq() the pending bit is checked and if it is set, the
+	interrupt is resent either via hardware or by a software resend
+	mechanism. (It's necessary to enable CONFIG_HARDIRQS_SW_RESEND when
+	you want to use the delayed interrupt disable feature and your
+	hardware is not capable of retriggering	an interrupt.)
+	The delayed interrupt disable is not configurable.
+	</para>
+	</sect2>
+    </sect1>
+    <sect1 id="Chiplevel_hardware_encapsulation">
+	<title>Chiplevel hardware encapsulation</title>
+	<para>
+	The chip level hardware descriptor structure irq_chip
+	contains all the direct chip relevant functions, which
+	can be utilized by the irq flow implementations.
+	  <itemizedlist>
+	  <listitem><para>irq_ack()</para></listitem>
+	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
+	  <listitem><para>irq_mask()</para></listitem>
+	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
+	  <listitem><para>irq_retrigger() - Optional</para></listitem>
+	  <listitem><para>irq_set_type() - Optional</para></listitem>
+	  <listitem><para>irq_set_wake() - Optional</para></listitem>
+	  </itemizedlist>
+	These primitives are strictly intended to mean what they say: ack means
+	ACK, masking means masking of an IRQ line, etc. It is up to the flow
+	handler(s) to use these basic units of lowlevel functionality.
+	</para>
+    </sect1>
+  </chapter>
+
+  <chapter id="doirq">
+     <title>__do_IRQ entry point</title>
+     <para>
+	The original implementation __do_IRQ() was an alternative entry
+	point for all types of interrupts. It not longer exists.
+     </para>
+     <para>
+	This handler turned out to be not suitable for all
+	interrupt hardware and was therefore reimplemented with split
+	functionality for edge/level/simple/percpu interrupts. This is not
+	only a functional optimization. It also shortens code paths for
+	interrupts.
+      </para>
+  </chapter>
+
+  <chapter id="locking">
+     <title>Locking on SMP</title>
+     <para>
+	The locking of chip registers is up to the architecture that
+	defines the chip primitives. The per-irq structure is
+	protected via desc->lock, by the generic layer.
+     </para>
+  </chapter>
+  <chapter id="structs">
+     <title>Structures</title>
+     <para>
+     This chapter contains the autogenerated documentation of the structures which are
+     used in the generic IRQ layer.
+     </para>
+!Iinclude/linux/irq.h
+!Iinclude/linux/interrupt.h
+  </chapter>
+
+  <chapter id="pubfunctions">
+     <title>Public Functions Provided</title>
+     <para>
+     This chapter contains the autogenerated documentation of the kernel API functions
+      which are exported.
+     </para>
+!Ekernel/irq/manage.c
+!Ekernel/irq/chip.c
+  </chapter>
+
+  <chapter id="intfunctions">
+     <title>Internal Functions Provided</title>
+     <para>
+     This chapter contains the autogenerated documentation of the internal functions.
+     </para>
+!Ikernel/irq/irqdesc.c
+!Ikernel/irq/handle.c
+!Ikernel/irq/chip.c
+  </chapter>
+
+  <chapter id="credits">
+     <title>Credits</title>
+	<para>
+		The following people have contributed to this document:
+		<orderedlist>
+			<listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem>
+			<listitem><para>Ingo Molnar<email>mingo@elte.hu</email></para></listitem>
+		</orderedlist>
+	</para>
+  </chapter>
+</book>

linux-imx/Documentation/DocBook/kernel-api.tmpl

diff --git a/linux-imx/Documentation/DocBook/kernel-api.tmpl b/linux-imx/Documentation/DocBook/kernel-api.tmpl
new file mode 100644
index 0000000..f75ab4c
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/kernel-api.tmpl
@@ -0,0 +1,330 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxKernelAPI">
+ <bookinfo>
+  <title>The Linux Kernel API</title>
+  
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="adt">
+     <title>Data Types</title>
+     <sect1><title>Doubly Linked Lists</title>
+!Iinclude/linux/list.h
+     </sect1>
+  </chapter>
+
+  <chapter id="libc">
+     <title>Basic C Library Functions</title>
+
+     <para>
+       When writing drivers, you cannot in general use routines which are
+       from the C Library.  Some of the functions have been found generally
+       useful and they are listed below.  The behaviour of these functions
+       may vary slightly from those defined by ANSI, and these deviations
+       are noted in the text.
+     </para>
+
+     <sect1><title>String Conversions</title>
+!Elib/vsprintf.c
+!Finclude/linux/kernel.h kstrtol
+!Finclude/linux/kernel.h kstrtoul
+!Elib/kstrtox.c
+     </sect1>
+     <sect1><title>String Manipulation</title>
+<!-- All functions are exported at now
+X!Ilib/string.c
+ -->
+!Elib/string.c
+     </sect1>
+     <sect1><title>Bit Operations</title>
+!Iarch/x86/include/asm/bitops.h
+     </sect1>
+  </chapter>
+
+  <chapter id="kernel-lib">
+     <title>Basic Kernel Library Functions</title>
+
+     <para>
+       The Linux kernel provides more basic utility functions.
+     </para>
+
+     <sect1><title>Bitmap Operations</title>
+!Elib/bitmap.c
+!Ilib/bitmap.c
+     </sect1>
+
+     <sect1><title>Command-line Parsing</title>
+!Elib/cmdline.c
+     </sect1>
+
+     <sect1 id="crc"><title>CRC Functions</title>
+!Elib/crc7.c
+!Elib/crc16.c
+!Elib/crc-itu-t.c
+!Elib/crc32.c
+!Elib/crc-ccitt.c
+     </sect1>
+
+     <sect1 id="idr"><title>idr/ida Functions</title>
+!Pinclude/linux/idr.h idr sync
+!Plib/idr.c IDA description
+!Elib/idr.c
+     </sect1>
+  </chapter>
+
+  <chapter id="mm">
+     <title>Memory Management in Linux</title>
+     <sect1><title>The Slab Cache</title>
+!Iinclude/linux/slab.h
+!Emm/slab.c
+     </sect1>
+     <sect1><title>User Space Memory Access</title>
+!Iarch/x86/include/asm/uaccess_32.h
+!Earch/x86/lib/usercopy_32.c
+     </sect1>
+     <sect1><title>More Memory Management Functions</title>
+!Emm/readahead.c
+!Emm/filemap.c
+!Emm/memory.c
+!Emm/vmalloc.c
+!Imm/page_alloc.c
+!Emm/mempool.c
+!Emm/dmapool.c
+!Emm/page-writeback.c
+!Emm/truncate.c
+     </sect1>
+  </chapter>
+
+
+  <chapter id="ipc">
+     <title>Kernel IPC facilities</title>
+
+     <sect1><title>IPC utilities</title>
+!Iipc/util.c
+     </sect1>
+  </chapter>
+
+  <chapter id="kfifo">
+     <title>FIFO Buffer</title>
+     <sect1><title>kfifo interface</title>
+!Iinclude/linux/kfifo.h
+     </sect1>
+  </chapter>
+
+  <chapter id="relayfs">
+     <title>relay interface support</title>
+
+     <para>
+	Relay interface support
+	is designed to provide an efficient mechanism for tools and
+	facilities to relay large amounts of data from kernel space to
+	user space.
+     </para>
+
+     <sect1><title>relay interface</title>
+!Ekernel/relay.c
+!Ikernel/relay.c
+     </sect1>
+  </chapter>
+
+  <chapter id="modload">
+     <title>Module Support</title>
+     <sect1><title>Module Loading</title>
+!Ekernel/kmod.c
+     </sect1>
+     <sect1><title>Inter Module support</title>
+        <para>
+           Refer to the file kernel/module.c for more information.
+        </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Ekernel/module.c
+-->
+     </sect1>
+  </chapter>
+
+  <chapter id="hardware">
+     <title>Hardware Interfaces</title>
+     <sect1><title>Interrupt Handling</title>
+!Ekernel/irq/manage.c
+     </sect1>
+
+     <sect1><title>DMA Channels</title>
+!Ekernel/dma.c
+     </sect1>
+
+     <sect1><title>Resources Management</title>
+!Ikernel/resource.c
+!Ekernel/resource.c
+     </sect1>
+
+     <sect1><title>MTRR Handling</title>
+!Earch/x86/kernel/cpu/mtrr/main.c
+     </sect1>
+
+     <sect1><title>PCI Support Library</title>
+!Edrivers/pci/pci.c
+!Edrivers/pci/pci-driver.c
+!Edrivers/pci/remove.c
+!Edrivers/pci/search.c
+!Edrivers/pci/msi.c
+!Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Edrivers/pci/hotplug.c
+-->
+!Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
+!Edrivers/pci/rom.c
+!Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
+     </sect1>
+     <sect1><title>PCI Hotplug Support Library</title>
+!Edrivers/pci/hotplug/pci_hotplug_core.c
+     </sect1>
+  </chapter>
+
+  <chapter id="firmware">
+     <title>Firmware Interfaces</title>
+     <sect1><title>DMI Interfaces</title>
+!Edrivers/firmware/dmi_scan.c
+     </sect1>
+     <sect1><title>EDD Interfaces</title>
+!Idrivers/firmware/edd.c
+     </sect1>
+  </chapter>
+
+  <chapter id="security">
+     <title>Security Framework</title>
+!Isecurity/security.c
+!Esecurity/inode.c
+  </chapter>
+
+  <chapter id="audit">
+     <title>Audit Interfaces</title>
+!Ekernel/audit.c
+!Ikernel/auditsc.c
+!Ikernel/auditfilter.c
+  </chapter>
+
+  <chapter id="accounting">
+     <title>Accounting Framework</title>
+!Ikernel/acct.c
+  </chapter>
+
+  <chapter id="blkdev">
+     <title>Block Devices</title>
+!Eblock/blk-core.c
+!Iblock/blk-core.c
+!Eblock/blk-map.c
+!Iblock/blk-sysfs.c
+!Eblock/blk-settings.c
+!Eblock/blk-exec.c
+!Eblock/blk-flush.c
+!Eblock/blk-lib.c
+!Eblock/blk-tag.c
+!Iblock/blk-tag.c
+!Eblock/blk-integrity.c
+!Ikernel/trace/blktrace.c
+!Iblock/genhd.c
+!Eblock/genhd.c
+  </chapter>
+
+  <chapter id="chrdev">
+	<title>Char devices</title>
+!Efs/char_dev.c
+  </chapter>
+
+  <chapter id="miscdev">
+     <title>Miscellaneous Devices</title>
+!Edrivers/char/misc.c
+  </chapter>
+
+  <chapter id="clk">
+     <title>Clock Framework</title>
+
+     <para>
+	The clock framework defines programming interfaces to support
+	software management of the system clock tree.
+	This framework is widely used with System-On-Chip (SOC) platforms
+	to support power management and various devices which may need
+	custom clock rates.
+	Note that these "clocks" don't relate to timekeeping or real
+	time clocks (RTCs), each of which have separate frameworks.
+	These <structname>struct clk</structname> instances may be used
+	to manage for example a 96 MHz signal that is used to shift bits
+	into and out of peripherals or busses, or otherwise trigger
+	synchronous state machine transitions in system hardware.
+     </para>
+
+     <para>
+	Power management is supported by explicit software clock gating:
+	unused clocks are disabled, so the system doesn't waste power
+	changing the state of transistors that aren't in active use.
+	On some systems this may be backed by hardware clock gating,
+	where clocks are gated without being disabled in software.
+	Sections of chips that are powered but not clocked may be able
+	to retain their last state.
+	This low power state is often called a <emphasis>retention
+	mode</emphasis>.
+	This mode still incurs leakage currents, especially with finer
+	circuit geometries, but for CMOS circuits power is mostly used
+	by clocked state changes.
+     </para>
+
+     <para>
+	Power-aware drivers only enable their clocks when the device
+	they manage is in active use.  Also, system sleep states often
+	differ according to which clock domains are active:  while a
+	"standby" state may allow wakeup from several active domains, a
+	"mem" (suspend-to-RAM) state may require a more wholesale shutdown
+	of clocks derived from higher speed PLLs and oscillators, limiting
+	the number of possible wakeup event sources.  A driver's suspend
+	method may need to be aware of system-specific clock constraints
+	on the target sleep state.
+     </para>
+
+     <para>
+        Some platforms support programmable clock generators.  These
+	can be used by external chips of various kinds, such as other
+	CPUs, multimedia codecs, and devices with strict requirements
+	for interface clocking.
+     </para>
+
+!Iinclude/linux/clk.h
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/kernel-hacking.tmpl

diff --git a/linux-imx/Documentation/DocBook/kernel-hacking.tmpl b/linux-imx/Documentation/DocBook/kernel-hacking.tmpl
new file mode 100644
index 0000000..d0758b2
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/kernel-hacking.tmpl
@@ -0,0 +1,1320 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="lk-hacking-guide">
+ <bookinfo>
+  <title>Unreliable Guide To Hacking The Linux Kernel</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Rusty</firstname>
+    <surname>Russell</surname>
+    <affiliation>
+     <address>
+      <email>rusty@rustcorp.com.au</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2005</year>
+   <holder>Rusty Russell</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+    This documentation is free software; you can redistribute
+    it and/or modify it under the terms of the GNU General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later
+    version.
+   </para>
+   
+   <para>
+    This program is distributed in the hope that it will be
+    useful, but WITHOUT ANY WARRANTY; without even the implied
+    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+    See the GNU General Public License for more details.
+   </para>
+   
+   <para>
+    You should have received a copy of the GNU General Public
+    License along with this program; if not, write to the Free
+    Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    MA 02111-1307 USA
+   </para>
+   
+   <para>
+    For more details see the file COPYING in the source
+    distribution of Linux.
+   </para>
+  </legalnotice>
+
+  <releaseinfo>
+   This is the first release of this document as part of the kernel tarball.
+  </releaseinfo>
+
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="introduction">
+  <title>Introduction</title>
+  <para>
+   Welcome, gentle reader, to Rusty's Remarkably Unreliable Guide to Linux
+   Kernel Hacking.  This document describes the common routines and
+   general requirements for kernel code: its goal is to serve as a
+   primer for Linux kernel development for experienced C
+   programmers.  I avoid implementation details: that's what the
+   code is for, and I ignore whole tracts of useful routines.
+  </para>
+  <para>
+   Before you read this, please understand that I never wanted to
+   write this document, being grossly under-qualified, but I always
+   wanted to read it, and this was the only way.  I hope it will
+   grow into a compendium of best practice, common starting points
+   and random information.
+  </para>
+ </chapter>
+
+ <chapter id="basic-players">
+  <title>The Players</title>
+
+  <para>
+   At any time each of the CPUs in a system can be:
+  </para>
+
+  <itemizedlist>
+   <listitem>
+    <para>
+     not associated with any process, serving a hardware interrupt;
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     not associated with any process, serving a softirq or tasklet;
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     running in kernel space, associated with a process (user context);
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     running a process in user space.
+    </para>
+   </listitem>
+  </itemizedlist>
+
+  <para>
+   There is an ordering between these.  The bottom two can preempt
+   each other, but above that is a strict hierarchy: each can only be
+   preempted by the ones above it.  For example, while a softirq is
+   running on a CPU, no other softirq will preempt it, but a hardware
+   interrupt can.  However, any other CPUs in the system execute
+   independently.
+  </para>
+
+  <para>
+   We'll see a number of ways that the user context can block
+   interrupts, to become truly non-preemptable.
+  </para>
+  
+  <sect1 id="basics-usercontext">
+   <title>User Context</title>
+
+   <para>
+    User context is when you are coming in from a system call or other
+    trap: like userspace, you can be preempted by more important tasks
+    and by interrupts.  You can sleep, by calling
+    <function>schedule()</function>.
+   </para>
+
+   <note>
+    <para>
+     You are always in user context on module load and unload,
+     and on operations on the block device layer.
+    </para>
+   </note>
+
+   <para>
+    In user context, the <varname>current</varname> pointer (indicating 
+    the task we are currently executing) is valid, and
+    <function>in_interrupt()</function>
+    (<filename>include/linux/interrupt.h</filename>) is <returnvalue>false
+    </returnvalue>.  
+   </para>
+
+   <caution>
+    <para>
+     Beware that if you have preemption or softirqs disabled
+     (see below), <function>in_interrupt()</function> will return a 
+     false positive.
+    </para>
+   </caution>
+  </sect1>
+
+  <sect1 id="basics-hardirqs">
+   <title>Hardware Interrupts (Hard IRQs)</title>
+
+   <para>
+    Timer ticks, <hardware>network cards</hardware> and 
+    <hardware>keyboard</hardware> are examples of real
+    hardware which produce interrupts at any time.  The kernel runs
+    interrupt handlers, which services the hardware.  The kernel
+    guarantees that this handler is never re-entered: if the same
+    interrupt arrives, it is queued (or dropped).  Because it
+    disables interrupts, this handler has to be fast: frequently it
+    simply acknowledges the interrupt, marks a 'software interrupt'
+    for execution and exits.
+   </para>
+
+   <para>
+    You can tell you are in a hardware interrupt, because 
+    <function>in_irq()</function> returns <returnvalue>true</returnvalue>.  
+   </para>
+   <caution>
+    <para>
+     Beware that this will return a false positive if interrupts are disabled 
+     (see below).
+    </para>
+   </caution>
+  </sect1>
+
+  <sect1 id="basics-softirqs">
+   <title>Software Interrupt Context: Softirqs and Tasklets</title>
+
+   <para>
+    Whenever a system call is about to return to userspace, or a
+    hardware interrupt handler exits, any 'software interrupts'
+    which are marked pending (usually by hardware interrupts) are
+    run (<filename>kernel/softirq.c</filename>).
+   </para>
+
+   <para>
+    Much of the real interrupt handling work is done here.  Early in
+    the transition to <acronym>SMP</acronym>, there were only 'bottom
+    halves' (BHs), which didn't take advantage of multiple CPUs.  Shortly 
+    after we switched from wind-up computers made of match-sticks and snot,
+    we abandoned this limitation and switched to 'softirqs'.
+   </para>
+
+   <para>
+    <filename class="headerfile">include/linux/interrupt.h</filename> lists the
+    different softirqs.  A very important softirq is the
+    timer softirq (<filename
+    class="headerfile">include/linux/timer.h</filename>): you can
+    register to have it call functions for you in a given length of
+    time.
+   </para>
+
+   <para>
+    Softirqs are often a pain to deal with, since the same softirq
+    will run simultaneously on more than one CPU.  For this reason,
+    tasklets (<filename
+    class="headerfile">include/linux/interrupt.h</filename>) are more
+    often used: they are dynamically-registrable (meaning you can have
+    as many as you want), and they also guarantee that any tasklet
+    will only run on one CPU at any time, although different tasklets
+    can run simultaneously.
+   </para>
+   <caution>
+    <para>
+     The name 'tasklet' is misleading: they have nothing to do with 'tasks',
+     and probably more to do with some bad vodka Alexey Kuznetsov had at the 
+     time.
+    </para>
+   </caution>
+
+   <para>
+    You can tell you are in a softirq (or tasklet)
+    using the <function>in_softirq()</function> macro 
+    (<filename class="headerfile">include/linux/interrupt.h</filename>).
+   </para>
+   <caution>
+    <para>
+     Beware that this will return a false positive if a bh lock (see below)
+     is held.
+    </para>
+   </caution>
+  </sect1>
+ </chapter>
+
+ <chapter id="basic-rules">
+  <title>Some Basic Rules</title>
+
+  <variablelist>
+   <varlistentry>
+    <term>No memory protection</term>
+    <listitem>
+     <para>
+      If you corrupt memory, whether in user context or
+      interrupt context, the whole machine will crash.  Are you
+      sure you can't do what you want in userspace?
+     </para>
+    </listitem>
+   </varlistentry>
+
+   <varlistentry>
+    <term>No floating point or <acronym>MMX</acronym></term>
+    <listitem>
+     <para>
+      The <acronym>FPU</acronym> context is not saved; even in user
+      context the <acronym>FPU</acronym> state probably won't
+      correspond with the current process: you would mess with some
+      user process' <acronym>FPU</acronym> state.  If you really want
+      to do this, you would have to explicitly save/restore the full
+      <acronym>FPU</acronym> state (and avoid context switches).  It
+      is generally a bad idea; use fixed point arithmetic first.
+     </para>
+    </listitem>
+   </varlistentry>
+
+   <varlistentry>
+    <term>A rigid stack limit</term>
+    <listitem>
+     <para>
+      Depending on configuration options the kernel stack is about 3K to 6K for most 32-bit architectures: it's
+      about 14K on most 64-bit archs, and often shared with interrupts
+      so you can't use it all.  Avoid deep recursion and huge local
+      arrays on the stack (allocate them dynamically instead).
+     </para>
+    </listitem>
+   </varlistentry>
+
+   <varlistentry>
+    <term>The Linux kernel is portable</term>
+    <listitem>
+     <para>
+      Let's keep it that way.  Your code should be 64-bit clean,
+      and endian-independent.  You should also minimize CPU
+      specific stuff, e.g. inline assembly should be cleanly
+      encapsulated and minimized to ease porting.  Generally it
+      should be restricted to the architecture-dependent part of
+      the kernel tree.
+     </para>
+    </listitem>
+   </varlistentry>
+  </variablelist>
+ </chapter>
+
+ <chapter id="ioctls">
+  <title>ioctls: Not writing a new system call</title>
+
+  <para>
+   A system call generally looks like this
+  </para>
+
+  <programlisting>
+asmlinkage long sys_mycall(int arg)
+{
+        return 0; 
+}
+  </programlisting>
+
+  <para>
+   First, in most cases you don't want to create a new system call.
+   You create a character device and implement an appropriate ioctl
+   for it.  This is much more flexible than system calls, doesn't have
+   to be entered in every architecture's
+   <filename class="headerfile">include/asm/unistd.h</filename> and
+   <filename>arch/kernel/entry.S</filename> file, and is much more
+   likely to be accepted by Linus.
+  </para>
+
+  <para>
+   If all your routine does is read or write some parameter, consider
+   implementing a <function>sysfs</function> interface instead.
+  </para>
+
+  <para>
+   Inside the ioctl you're in user context to a process.  When a
+   error occurs you return a negated errno (see
+   <filename class="headerfile">include/linux/errno.h</filename>),
+   otherwise you return <returnvalue>0</returnvalue>.
+  </para>
+
+  <para>
+   After you slept you should check if a signal occurred: the
+   Unix/Linux way of handling signals is to temporarily exit the
+   system call with the <constant>-ERESTARTSYS</constant> error.  The
+   system call entry code will switch back to user context, process
+   the signal handler and then your system call will be restarted
+   (unless the user disabled that).  So you should be prepared to
+   process the restart, e.g. if you're in the middle of manipulating
+   some data structure.
+  </para>
+
+  <programlisting>
+if (signal_pending(current))
+        return -ERESTARTSYS;
+  </programlisting>
+
+  <para>
+   If you're doing longer computations: first think userspace. If you
+   <emphasis>really</emphasis> want to do it in kernel you should
+   regularly check if you need to give up the CPU (remember there is
+   cooperative multitasking per CPU).  Idiom:
+  </para>
+
+  <programlisting>
+cond_resched(); /* Will sleep */ 
+  </programlisting>
+
+  <para>
+   A short note on interface design: the UNIX system call motto is
+   "Provide mechanism not policy".
+  </para>
+ </chapter>
+
+ <chapter id="deadlock-recipes">
+  <title>Recipes for Deadlock</title>
+
+  <para>
+   You cannot call any routines which may sleep, unless:
+  </para>
+  <itemizedlist>
+   <listitem>
+    <para>
+     You are in user context.
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     You do not own any spinlocks.
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     You have interrupts enabled (actually, Andi Kleen says
+     that the scheduling code will enable them for you, but
+     that's probably not what you wanted).
+    </para>
+   </listitem>
+  </itemizedlist>
+
+  <para>
+   Note that some functions may sleep implicitly: common ones are
+   the user space access functions (*_user) and memory allocation
+   functions without <symbol>GFP_ATOMIC</symbol>.
+  </para>
+
+  <para>
+   You should always compile your kernel
+   <symbol>CONFIG_DEBUG_ATOMIC_SLEEP</symbol> on, and it will warn
+   you if you break these rules.  If you <emphasis>do</emphasis> break
+   the rules, you will eventually lock up your box.
+  </para>
+
+  <para>
+   Really.
+  </para>
+ </chapter>
+
+ <chapter id="common-routines">
+  <title>Common Routines</title>
+
+  <sect1 id="routines-printk">
+   <title>
+    <function>printk()</function>
+    <filename class="headerfile">include/linux/kernel.h</filename>
+   </title>
+
+   <para>
+    <function>printk()</function> feeds kernel messages to the
+    console, dmesg, and the syslog daemon.  It is useful for debugging
+    and reporting errors, and can be used inside interrupt context,
+    but use with caution: a machine which has its console flooded with
+    printk messages is unusable.  It uses a format string mostly
+    compatible with ANSI C printf, and C string concatenation to give
+    it a first "priority" argument:
+   </para>
+
+   <programlisting>
+printk(KERN_INFO "i = %u\n", i);
+   </programlisting>
+
+   <para>
+    See <filename class="headerfile">include/linux/kernel.h</filename>;
+    for other KERN_ values; these are interpreted by syslog as the
+    level.  Special case: for printing an IP address use
+   </para>
+
+   <programlisting>
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
+   </programlisting>
+
+   <para>
+    <function>printk()</function> internally uses a 1K buffer and does
+    not catch overruns.  Make sure that will be enough.
+   </para>
+
+   <note>
+    <para>
+     You will know when you are a real kernel hacker
+     when you start typoing printf as printk in your user programs :)
+    </para>
+   </note>
+
+   <!--- From the Lions book reader department --> 
+
+   <note>
+    <para>
+     Another sidenote: the original Unix Version 6 sources had a
+     comment on top of its printf function: "Printf should not be
+     used for chit-chat".  You should follow that advice.
+    </para>
+   </note>
+  </sect1>
+
+  <sect1 id="routines-copy">
+   <title>
+    <function>copy_[to/from]_user()</function>
+    /
+    <function>get_user()</function>
+    /
+    <function>put_user()</function>
+    <filename class="headerfile">include/asm/uaccess.h</filename>
+   </title>  
+
+   <para>
+    <emphasis>[SLEEPS]</emphasis>
+   </para>
+
+   <para>
+    <function>put_user()</function> and <function>get_user()</function>
+    are used to get and put single values (such as an int, char, or
+    long) from and to userspace.  A pointer into userspace should
+    never be simply dereferenced: data should be copied using these
+    routines.  Both return <constant>-EFAULT</constant> or 0.
+   </para>
+   <para>
+    <function>copy_to_user()</function> and
+    <function>copy_from_user()</function> are more general: they copy
+    an arbitrary amount of data to and from userspace.
+    <caution>
+     <para>
+      Unlike <function>put_user()</function> and
+      <function>get_user()</function>, they return the amount of
+      uncopied data (ie. <returnvalue>0</returnvalue> still means
+      success).
+     </para>
+    </caution>
+    [Yes, this moronic interface makes me cringe.  The flamewar comes up every year or so. --RR.]
+   </para>
+   <para>
+    The functions may sleep implicitly. This should never be called
+    outside user context (it makes no sense), with interrupts
+    disabled, or a spinlock held.
+   </para>
+  </sect1>
+
+  <sect1 id="routines-kmalloc">
+   <title><function>kmalloc()</function>/<function>kfree()</function>
+    <filename class="headerfile">include/linux/slab.h</filename></title>
+
+   <para>
+    <emphasis>[MAY SLEEP: SEE BELOW]</emphasis>
+   </para>
+
+   <para>
+    These routines are used to dynamically request pointer-aligned
+    chunks of memory, like malloc and free do in userspace, but
+    <function>kmalloc()</function> takes an extra flag word.
+    Important values:
+   </para>
+
+   <variablelist>
+    <varlistentry>
+     <term>
+      <constant>
+       GFP_KERNEL
+      </constant>
+     </term>
+     <listitem>
+      <para>
+       May sleep and swap to free memory. Only allowed in user
+       context, but is the most reliable way to allocate memory.
+      </para>
+     </listitem>
+    </varlistentry>
+    
+    <varlistentry>
+     <term>
+      <constant>
+       GFP_ATOMIC
+      </constant>
+     </term>
+     <listitem>
+      <para>
+       Don't sleep. Less reliable than <constant>GFP_KERNEL</constant>,
+       but may be called from interrupt context. You should
+       <emphasis>really</emphasis> have a good out-of-memory
+       error-handling strategy.
+      </para>
+     </listitem>
+    </varlistentry>
+    
+    <varlistentry>
+     <term>
+      <constant>
+       GFP_DMA
+      </constant>
+     </term>
+     <listitem>
+      <para>
+       Allocate ISA DMA lower than 16MB. If you don't know what that
+       is you don't need it.  Very unreliable.
+      </para>
+     </listitem>
+    </varlistentry>
+   </variablelist>
+
+   <para>
+    If you see a <errorname>sleeping function called from invalid
+    context</errorname> warning message, then maybe you called a
+    sleeping allocation function from interrupt context without
+    <constant>GFP_ATOMIC</constant>.  You should really fix that.
+    Run, don't walk.
+   </para>
+
+   <para>
+    If you are allocating at least <constant>PAGE_SIZE</constant>
+    (<filename class="headerfile">include/asm/page.h</filename>) bytes,
+    consider using <function>__get_free_pages()</function>
+
+    (<filename class="headerfile">include/linux/mm.h</filename>).  It
+    takes an order argument (0 for page sized, 1 for double page, 2
+    for four pages etc.) and the same memory priority flag word as
+    above.
+   </para>
+
+   <para>
+    If you are allocating more than a page worth of bytes you can use
+    <function>vmalloc()</function>.  It'll allocate virtual memory in
+    the kernel map.  This block is not contiguous in physical memory,
+    but the <acronym>MMU</acronym> makes it look like it is for you
+    (so it'll only look contiguous to the CPUs, not to external device
+    drivers).  If you really need large physically contiguous memory
+    for some weird device, you have a problem: it is poorly supported
+    in Linux because after some time memory fragmentation in a running
+    kernel makes it hard.  The best way is to allocate the block early
+    in the boot process via the <function>alloc_bootmem()</function>
+    routine.
+   </para>
+
+   <para>
+    Before inventing your own cache of often-used objects consider
+    using a slab cache in
+    <filename class="headerfile">include/linux/slab.h</filename>
+   </para>
+  </sect1>
+
+  <sect1 id="routines-current">
+   <title><function>current</function>
+    <filename class="headerfile">include/asm/current.h</filename></title>
+
+   <para>
+    This global variable (really a macro) contains a pointer to
+    the current task structure, so is only valid in user context.
+    For example, when a process makes a system call, this will
+    point to the task structure of the calling process.  It is
+    <emphasis>not NULL</emphasis> in interrupt context.
+   </para>
+  </sect1>
+
+  <sect1 id="routines-udelay">
+   <title><function>mdelay()</function>/<function>udelay()</function>
+     <filename class="headerfile">include/asm/delay.h</filename>
+     <filename class="headerfile">include/linux/delay.h</filename>
+   </title>
+
+   <para>
+    The <function>udelay()</function> and <function>ndelay()</function> functions can be used for small pauses.
+    Do not use large values with them as you risk
+    overflow - the helper function <function>mdelay()</function> is useful
+    here, or consider <function>msleep()</function>.
+   </para> 
+  </sect1>
+ 
+  <sect1 id="routines-endian">
+   <title><function>cpu_to_be32()</function>/<function>be32_to_cpu()</function>/<function>cpu_to_le32()</function>/<function>le32_to_cpu()</function>
+     <filename class="headerfile">include/asm/byteorder.h</filename>
+   </title>
+
+   <para>
+    The <function>cpu_to_be32()</function> family (where the "32" can
+    be replaced by 64 or 16, and the "be" can be replaced by "le") are
+    the general way to do endian conversions in the kernel: they
+    return the converted value.  All variations supply the reverse as
+    well: <function>be32_to_cpu()</function>, etc.
+   </para>
+
+   <para>
+    There are two major variations of these functions: the pointer
+    variation, such as <function>cpu_to_be32p()</function>, which take
+    a pointer to the given type, and return the converted value.  The
+    other variation is the "in-situ" family, such as
+    <function>cpu_to_be32s()</function>, which convert value referred
+    to by the pointer, and return void.
+   </para> 
+  </sect1>
+
+  <sect1 id="routines-local-irqs">
+   <title><function>local_irq_save()</function>/<function>local_irq_restore()</function>
+    <filename class="headerfile">include/asm/system.h</filename>
+   </title>
+
+   <para>
+    These routines disable hard interrupts on the local CPU, and
+    restore them.  They are reentrant; saving the previous state in
+    their one <varname>unsigned long flags</varname> argument.  If you
+    know that interrupts are enabled, you can simply use
+    <function>local_irq_disable()</function> and
+    <function>local_irq_enable()</function>.
+   </para>
+  </sect1>
+
+  <sect1 id="routines-softirqs">
+   <title><function>local_bh_disable()</function>/<function>local_bh_enable()</function>
+    <filename class="headerfile">include/linux/interrupt.h</filename></title>
+
+   <para>
+    These routines disable soft interrupts on the local CPU, and
+    restore them.  They are reentrant; if soft interrupts were
+    disabled before, they will still be disabled after this pair
+    of functions has been called.  They prevent softirqs and tasklets
+    from running on the current CPU.
+   </para>
+  </sect1>
+
+  <sect1 id="routines-processorids">
+   <title><function>smp_processor_id</function>()
+    <filename class="headerfile">include/asm/smp.h</filename></title>
+   
+   <para>
+    <function>get_cpu()</function> disables preemption (so you won't
+    suddenly get moved to another CPU) and returns the current
+    processor number, between 0 and <symbol>NR_CPUS</symbol>.  Note
+    that the CPU numbers are not necessarily continuous.  You return
+    it again with <function>put_cpu()</function> when you are done.
+   </para>
+   <para>
+    If you know you cannot be preempted by another task (ie. you are
+    in interrupt context, or have preemption disabled) you can use
+    smp_processor_id().
+   </para>
+  </sect1>
+
+  <sect1 id="routines-init">
+   <title><type>__init</type>/<type>__exit</type>/<type>__initdata</type>
+    <filename class="headerfile">include/linux/init.h</filename></title>
+
+   <para>
+    After boot, the kernel frees up a special section; functions
+    marked with <type>__init</type> and data structures marked with
+    <type>__initdata</type> are dropped after boot is complete: similarly
+    modules discard this memory after initialization.  <type>__exit</type>
+    is used to declare a function which is only required on exit: the
+    function will be dropped if this file is not compiled as a module.
+    See the header file for use. Note that it makes no sense for a function
+    marked with <type>__init</type> to be exported to modules with 
+    <function>EXPORT_SYMBOL()</function> - this will break.
+   </para>
+
+  </sect1>
+
+  <sect1 id="routines-init-again">
+   <title><function>__initcall()</function>/<function>module_init()</function>
+    <filename class="headerfile">include/linux/init.h</filename></title>
+   <para>
+    Many parts of the kernel are well served as a module
+    (dynamically-loadable parts of the kernel).  Using the
+    <function>module_init()</function> and
+    <function>module_exit()</function> macros it is easy to write code
+    without #ifdefs which can operate both as a module or built into
+    the kernel.
+   </para>
+
+   <para>
+    The <function>module_init()</function> macro defines which
+    function is to be called at module insertion time (if the file is
+    compiled as a module), or at boot time: if the file is not
+    compiled as a module the <function>module_init()</function> macro
+    becomes equivalent to <function>__initcall()</function>, which
+    through linker magic ensures that the function is called on boot.
+   </para>
+
+   <para>
+    The function can return a negative error number to cause
+    module loading to fail (unfortunately, this has no effect if
+    the module is compiled into the kernel).  This function is
+    called in user context with interrupts enabled, so it can sleep.
+   </para>
+  </sect1>
+  
+  <sect1 id="routines-moduleexit">
+   <title> <function>module_exit()</function>
+    <filename class="headerfile">include/linux/init.h</filename> </title>
+
+   <para>
+    This macro defines the function to be called at module removal
+    time (or never, in the case of the file compiled into the
+    kernel).  It will only be called if the module usage count has
+    reached zero.  This function can also sleep, but cannot fail:
+    everything must be cleaned up by the time it returns.
+   </para>
+
+   <para>
+    Note that this macro is optional: if it is not present, your
+    module will not be removable (except for 'rmmod -f').
+   </para>
+  </sect1>
+
+  <sect1 id="routines-module-use-counters">
+   <title> <function>try_module_get()</function>/<function>module_put()</function>
+    <filename class="headerfile">include/linux/module.h</filename></title>
+
+   <para>
+    These manipulate the module usage count, to protect against
+    removal (a module also can't be removed if another module uses one
+    of its exported symbols: see below).  Before calling into module
+    code, you should call <function>try_module_get()</function> on
+    that module: if it fails, then the module is being removed and you
+    should act as if it wasn't there.  Otherwise, you can safely enter
+    the module, and call <function>module_put()</function> when you're
+    finished.
+   </para>
+
+   <para>
+   Most registerable structures have an
+   <structfield>owner</structfield> field, such as in the
+   <structname>file_operations</structname> structure. Set this field
+   to the macro <symbol>THIS_MODULE</symbol>.
+   </para>
+  </sect1>
+
+ <!-- add info on new-style module refcounting here -->
+ </chapter>
+
+ <chapter id="queues">
+  <title>Wait Queues
+   <filename class="headerfile">include/linux/wait.h</filename>
+  </title>
+  <para>
+   <emphasis>[SLEEPS]</emphasis>
+  </para>
+
+  <para>
+   A wait queue is used to wait for someone to wake you up when a
+   certain condition is true.  They must be used carefully to ensure
+   there is no race condition.  You declare a
+   <type>wait_queue_head_t</type>, and then processes which want to
+   wait for that condition declare a <type>wait_queue_t</type>
+   referring to themselves, and place that in the queue.
+  </para>
+
+  <sect1 id="queue-declaring">
+   <title>Declaring</title>
+   
+   <para>
+    You declare a <type>wait_queue_head_t</type> using the
+    <function>DECLARE_WAIT_QUEUE_HEAD()</function> macro, or using the
+    <function>init_waitqueue_head()</function> routine in your
+    initialization code.
+   </para>
+  </sect1>
+  
+  <sect1 id="queue-waitqueue">
+   <title>Queuing</title>
+   
+   <para>
+    Placing yourself in the waitqueue is fairly complex, because you
+    must put yourself in the queue before checking the condition.
+    There is a macro to do this:
+    <function>wait_event_interruptible()</function>
+
+    <filename class="headerfile">include/linux/wait.h</filename> The
+    first argument is the wait queue head, and the second is an
+    expression which is evaluated; the macro returns
+    <returnvalue>0</returnvalue> when this expression is true, or
+    <returnvalue>-ERESTARTSYS</returnvalue> if a signal is received.
+    The <function>wait_event()</function> version ignores signals.
+   </para>
+   <para>
+   Do not use the <function>sleep_on()</function> function family -
+   it is very easy to accidentally introduce races; almost certainly
+   one of the <function>wait_event()</function> family will do, or a
+   loop around <function>schedule_timeout()</function>. If you choose
+   to loop around <function>schedule_timeout()</function> remember
+   you must set the task state (with 
+   <function>set_current_state()</function>) on each iteration to avoid
+   busy-looping.
+   </para>
+ 
+  </sect1>
+
+  <sect1 id="queue-waking">
+   <title>Waking Up Queued Tasks</title>
+   
+   <para>
+    Call <function>wake_up()</function>
+
+    <filename class="headerfile">include/linux/wait.h</filename>;,
+    which will wake up every process in the queue.  The exception is
+    if one has <constant>TASK_EXCLUSIVE</constant> set, in which case
+    the remainder of the queue will not be woken.  There are other variants
+    of this basic function available in the same header.
+   </para>
+  </sect1>
+ </chapter>
+
+ <chapter id="atomic-ops">
+  <title>Atomic Operations</title>
+
+  <para>
+   Certain operations are guaranteed atomic on all platforms.  The
+   first class of operations work on <type>atomic_t</type>
+
+   <filename class="headerfile">include/asm/atomic.h</filename>; this
+   contains a signed integer (at least 32 bits long), and you must use
+   these functions to manipulate or read atomic_t variables.
+   <function>atomic_read()</function> and
+   <function>atomic_set()</function> get and set the counter,
+   <function>atomic_add()</function>,
+   <function>atomic_sub()</function>,
+   <function>atomic_inc()</function>,
+   <function>atomic_dec()</function>, and
+   <function>atomic_dec_and_test()</function> (returns
+   <returnvalue>true</returnvalue> if it was decremented to zero).
+  </para>
+
+  <para>
+   Yes.  It returns <returnvalue>true</returnvalue> (i.e. != 0) if the
+   atomic variable is zero.
+  </para>
+
+  <para>
+   Note that these functions are slower than normal arithmetic, and
+   so should not be used unnecessarily.
+  </para>
+
+  <para>
+   The second class of atomic operations is atomic bit operations on an
+   <type>unsigned long</type>, defined in
+
+   <filename class="headerfile">include/linux/bitops.h</filename>.  These
+   operations generally take a pointer to the bit pattern, and a bit
+   number: 0 is the least significant bit.
+   <function>set_bit()</function>, <function>clear_bit()</function>
+   and <function>change_bit()</function> set, clear, and flip the
+   given bit.  <function>test_and_set_bit()</function>,
+   <function>test_and_clear_bit()</function> and
+   <function>test_and_change_bit()</function> do the same thing,
+   except return true if the bit was previously set; these are
+   particularly useful for atomically setting flags.
+  </para>
+  
+  <para>
+   It is possible to call these operations with bit indices greater
+   than BITS_PER_LONG.  The resulting behavior is strange on big-endian
+   platforms though so it is a good idea not to do this.
+  </para>
+ </chapter>
+
+ <chapter id="symbols">
+  <title>Symbols</title>
+
+  <para>
+   Within the kernel proper, the normal linking rules apply
+   (ie. unless a symbol is declared to be file scope with the
+   <type>static</type> keyword, it can be used anywhere in the
+   kernel).  However, for modules, a special exported symbol table is
+   kept which limits the entry points to the kernel proper.  Modules
+   can also export symbols.
+  </para>
+
+  <sect1 id="sym-exportsymbols">
+   <title><function>EXPORT_SYMBOL()</function>
+    <filename class="headerfile">include/linux/export.h</filename></title>
+
+   <para>
+    This is the classic method of exporting a symbol: dynamically
+    loaded modules will be able to use the symbol as normal.
+   </para>
+  </sect1>
+
+  <sect1 id="sym-exportsymbols-gpl">
+   <title><function>EXPORT_SYMBOL_GPL()</function>
+    <filename class="headerfile">include/linux/export.h</filename></title>
+
+   <para>
+    Similar to <function>EXPORT_SYMBOL()</function> except that the
+    symbols exported by <function>EXPORT_SYMBOL_GPL()</function> can
+    only be seen by modules with a
+    <function>MODULE_LICENSE()</function> that specifies a GPL
+    compatible license.  It implies that the function is considered
+    an internal implementation issue, and not really an interface.
+   </para>
+  </sect1>
+ </chapter>
+
+ <chapter id="conventions">
+  <title>Routines and Conventions</title>
+
+  <sect1 id="conventions-doublelinkedlist">
+   <title>Double-linked lists
+    <filename class="headerfile">include/linux/list.h</filename></title>
+
+   <para>
+    There used to be three sets of linked-list routines in the kernel
+    headers, but this one is the winner.  If you don't have some
+    particular pressing need for a single list, it's a good choice.
+   </para>
+
+   <para>
+    In particular, <function>list_for_each_entry</function> is useful.
+   </para>
+  </sect1>
+
+  <sect1 id="convention-returns">
+   <title>Return Conventions</title>
+
+   <para>
+    For code called in user context, it's very common to defy C
+    convention, and return <returnvalue>0</returnvalue> for success,
+    and a negative error number
+    (eg. <returnvalue>-EFAULT</returnvalue>) for failure.  This can be
+    unintuitive at first, but it's fairly widespread in the kernel.
+   </para>
+
+   <para>
+    Using <function>ERR_PTR()</function>
+
+    <filename class="headerfile">include/linux/err.h</filename>; to
+    encode a negative error number into a pointer, and
+    <function>IS_ERR()</function> and <function>PTR_ERR()</function>
+    to get it back out again: avoids a separate pointer parameter for
+    the error number.  Icky, but in a good way.
+   </para>
+  </sect1>
+
+  <sect1 id="conventions-borkedcompile">
+   <title>Breaking Compilation</title>
+
+   <para>
+    Linus and the other developers sometimes change function or
+    structure names in development kernels; this is not done just to
+    keep everyone on their toes: it reflects a fundamental change
+    (eg. can no longer be called with interrupts on, or does extra
+    checks, or doesn't do checks which were caught before).  Usually
+    this is accompanied by a fairly complete note to the linux-kernel
+    mailing list; search the archive.  Simply doing a global replace
+    on the file usually makes things <emphasis>worse</emphasis>.
+   </para>
+  </sect1>
+
+  <sect1 id="conventions-initialising">
+   <title>Initializing structure members</title>
+
+   <para>
+    The preferred method of initializing structures is to use
+    designated initialisers, as defined by ISO C99, eg:
+   </para>
+   <programlisting>
+static struct block_device_operations opt_fops = {
+        .open               = opt_open,
+        .release            = opt_release,
+        .ioctl              = opt_ioctl,
+        .check_media_change = opt_media_change,
+};
+   </programlisting>
+   <para>
+    This makes it easy to grep for, and makes it clear which
+    structure fields are set.  You should do this because it looks
+    cool.
+   </para>
+  </sect1>
+
+  <sect1 id="conventions-gnu-extns">
+   <title>GNU Extensions</title>
+
+   <para>
+    GNU Extensions are explicitly allowed in the Linux kernel.
+    Note that some of the more complex ones are not very well
+    supported, due to lack of general use, but the following are
+    considered standard (see the GCC info page section "C
+    Extensions" for more details - Yes, really the info page, the
+    man page is only a short summary of the stuff in info).
+   </para>
+   <itemizedlist>
+    <listitem>
+     <para>
+      Inline functions
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Statement expressions (ie. the ({ and }) constructs).
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Declaring attributes of a function / variable / type
+      (__attribute__)
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      typeof
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Zero length arrays
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Macro varargs
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Arithmetic on void pointers
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Non-Constant initializers
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Assembler Instructions (not outside arch/ and include/asm/)
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      Function names as strings (__func__).
+     </para>
+    </listitem>
+    <listitem>
+     <para>
+      __builtin_constant_p()
+     </para>
+    </listitem>
+   </itemizedlist>
+
+   <para>
+    Be wary when using long long in the kernel, the code gcc generates for
+    it is horrible and worse: division and multiplication does not work
+    on i386 because the GCC runtime functions for it are missing from
+    the kernel environment.
+   </para>
+
+    <!-- FIXME: add a note about ANSI aliasing cleanness -->
+  </sect1>
+
+  <sect1 id="conventions-cplusplus">
+   <title>C++</title>
+   
+   <para>
+    Using C++ in the kernel is usually a bad idea, because the
+    kernel does not provide the necessary runtime environment
+    and the include files are not tested for it.  It is still
+    possible, but not recommended.  If you really want to do
+    this, forget about exceptions at least.
+   </para>
+  </sect1>
+
+  <sect1 id="conventions-ifdef">
+   <title>&num;if</title>
+   
+   <para>
+    It is generally considered cleaner to use macros in header files
+    (or at the top of .c files) to abstract away functions rather than
+    using `#if' pre-processor statements throughout the source code.
+   </para>
+  </sect1>
+ </chapter>
+
+ <chapter id="submitting">
+  <title>Putting Your Stuff in the Kernel</title>
+
+  <para>
+   In order to get your stuff into shape for official inclusion, or
+   even to make a neat patch, there's administrative work to be
+   done:
+  </para>
+  <itemizedlist>
+   <listitem>
+    <para>
+     Figure out whose pond you've been pissing in.  Look at the top of
+     the source files, inside the <filename>MAINTAINERS</filename>
+     file, and last of all in the <filename>CREDITS</filename> file.
+     You should coordinate with this person to make sure you're not
+     duplicating effort, or trying something that's already been
+     rejected.
+    </para>
+
+    <para>
+     Make sure you put your name and EMail address at the top of
+     any files you create or mangle significantly.  This is the
+     first place people will look when they find a bug, or when
+     <emphasis>they</emphasis> want to make a change.
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     Usually you want a configuration option for your kernel hack.
+     Edit <filename>Kconfig</filename> in the appropriate directory.
+     The Config language is simple to use by cut and paste, and there's
+     complete documentation in
+     <filename>Documentation/kbuild/kconfig-language.txt</filename>.
+    </para>
+
+    <para>
+     In your description of the option, make sure you address both the
+     expert user and the user who knows nothing about your feature.  Mention
+     incompatibilities and issues here.  <emphasis> Definitely
+     </emphasis> end your description with <quote> if in doubt, say N
+     </quote> (or, occasionally, `Y'); this is for people who have no
+     idea what you are talking about.
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     Edit the <filename>Makefile</filename>: the CONFIG variables are
+     exported here so you can usually just add a "obj-$(CONFIG_xxx) +=
+     xxx.o" line.  The syntax is documented in
+     <filename>Documentation/kbuild/makefiles.txt</filename>.
+    </para>
+   </listitem>
+
+   <listitem>
+    <para>
+     Put yourself in <filename>CREDITS</filename> if you've done
+     something noteworthy, usually beyond a single file (your name
+     should be at the top of the source files anyway).
+     <filename>MAINTAINERS</filename> means you want to be consulted
+     when changes are made to a subsystem, and hear about bugs; it
+     implies a more-than-passing commitment to some part of the code.
+    </para>
+   </listitem>
+   
+   <listitem>
+    <para>
+     Finally, don't forget to read <filename>Documentation/SubmittingPatches</filename>
+     and possibly <filename>Documentation/SubmittingDrivers</filename>.
+    </para>
+   </listitem>
+  </itemizedlist>
+ </chapter>
+
+ <chapter id="cantrips">
+  <title>Kernel Cantrips</title>
+
+  <para>
+   Some favorites from browsing the source.  Feel free to add to this
+   list.
+  </para>
+
+  <para>
+   <filename>arch/x86/include/asm/delay.h:</filename>
+  </para>
+  <programlisting>
+#define ndelay(n) (__builtin_constant_p(n) ? \
+        ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+        __ndelay(n))
+  </programlisting>
+
+  <para>
+   <filename>include/linux/fs.h</filename>:
+  </para>
+  <programlisting>
+/*
+ * Kernel pointers have redundant information, so we can use a
+ * scheme where we can return either an error code or a dentry
+ * pointer with the same return value.
+ *
+ * This should be a per-architecture thing, to allow different
+ * error and pointer decisions.
+ */
+ #define ERR_PTR(err)    ((void *)((long)(err)))
+ #define PTR_ERR(ptr)    ((long)(ptr))
+ #define IS_ERR(ptr)     ((unsigned long)(ptr) > (unsigned long)(-1000))
+</programlisting>
+
+  <para>
+   <filename>arch/x86/include/asm/uaccess_32.h:</filename>
+  </para>
+
+  <programlisting>
+#define copy_to_user(to,from,n)                         \
+        (__builtin_constant_p(n) ?                      \
+         __constant_copy_to_user((to),(from),(n)) :     \
+         __generic_copy_to_user((to),(from),(n)))
+  </programlisting>
+
+  <para>
+   <filename>arch/sparc/kernel/head.S:</filename>
+  </para>
+
+  <programlisting>
+/*
+ * Sun people can't spell worth damn. "compatability" indeed.
+ * At least we *know* we can't spell, and use a spell-checker.
+ */
+
+/* Uh, actually Linus it is I who cannot spell. Too much murky
+ * Sparc assembly will do this to ya.
+ */
+C_LABEL(cputypvar):
+        .asciz "compatibility"
+
+/* Tested on SS-5, SS-10. Probably someone at Sun applied a spell-checker. */
+        .align 4
+C_LABEL(cputypvar_sun4m):
+        .asciz "compatible"
+  </programlisting>
+
+  <para>
+   <filename>arch/sparc/lib/checksum.S:</filename>
+  </para>
+
+  <programlisting>
+        /* Sun, you just can't beat me, you just can't.  Stop trying,
+         * give up.  I'm serious, I am going to kick the living shit
+         * out of you, game over, lights out.
+         */
+  </programlisting>
+ </chapter>
+
+ <chapter id="credits">
+  <title>Thanks</title>
+
+  <para>
+   Thanks to Andi Kleen for the idea, answering my questions, fixing
+   my mistakes, filling content, etc.  Philipp Rumpf for more spelling
+   and clarity fixes, and some excellent non-obvious points.  Werner
+   Almesberger for giving me a great summary of
+   <function>disable_irq()</function>, and Jes Sorensen and Andrea
+   Arcangeli added caveats. Michael Elizabeth Chastain for checking
+   and adding to the Configure section. <!-- Rusty insisted on this
+   bit; I didn't do it! --> Telsa Gwynne for teaching me DocBook. 
+  </para>
+ </chapter>
+</book>
+

linux-imx/Documentation/DocBook/kernel-locking.tmpl

diff --git a/linux-imx/Documentation/DocBook/kernel-locking.tmpl b/linux-imx/Documentation/DocBook/kernel-locking.tmpl
new file mode 100644
index 0000000..67e7ab4
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/kernel-locking.tmpl
@@ -0,0 +1,2146 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LKLockingGuide">
+ <bookinfo>
+  <title>Unreliable Guide To Locking</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Rusty</firstname>
+    <surname>Russell</surname>
+    <affiliation>
+     <address>
+      <email>rusty@rustcorp.com.au</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2003</year>
+   <holder>Rusty Russell</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+  <chapter id="intro">
+   <title>Introduction</title>
+   <para>
+     Welcome, to Rusty's Remarkably Unreliable Guide to Kernel
+     Locking issues.  This document describes the locking systems in
+     the Linux Kernel in 2.6.
+   </para>
+   <para>
+     With the wide availability of HyperThreading, and <firstterm
+     linkend="gloss-preemption">preemption </firstterm> in the Linux
+     Kernel, everyone hacking on the kernel needs to know the
+     fundamentals of concurrency and locking for
+     <firstterm linkend="gloss-smp"><acronym>SMP</acronym></firstterm>.
+   </para>
+  </chapter>
+
+   <chapter id="races">
+    <title>The Problem With Concurrency</title>
+    <para>
+      (Skip this if you know what a Race Condition is).
+    </para>
+    <para>
+      In a normal program, you can increment a counter like so:
+    </para>
+    <programlisting>
+      very_important_count++;
+    </programlisting>
+
+    <para>
+      This is what they would expect to happen:
+    </para>
+
+    <table>
+     <title>Expected Results</title>
+
+     <tgroup cols="2" align="left">
+
+      <thead>
+       <row>
+        <entry>Instance 1</entry>
+        <entry>Instance 2</entry>
+       </row>
+      </thead>
+
+      <tbody>
+       <row>
+        <entry>read very_important_count (5)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry>add 1 (6)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry>write very_important_count (6)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>read very_important_count (6)</entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>add 1 (7)</entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>write very_important_count (7)</entry>
+       </row>
+      </tbody>
+
+     </tgroup>
+    </table>
+
+    <para>
+     This is what might happen:
+    </para>
+
+    <table>
+     <title>Possible Results</title>
+
+     <tgroup cols="2" align="left">
+      <thead>
+       <row>
+        <entry>Instance 1</entry>
+        <entry>Instance 2</entry>
+       </row>
+      </thead>
+
+      <tbody>
+       <row>
+        <entry>read very_important_count (5)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>read very_important_count (5)</entry>
+       </row>
+       <row>
+        <entry>add 1 (6)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>add 1 (6)</entry>
+       </row>
+       <row>
+        <entry>write very_important_count (6)</entry>
+        <entry></entry>
+       </row>
+       <row>
+        <entry></entry>
+        <entry>write very_important_count (6)</entry>
+       </row>
+      </tbody>
+     </tgroup>
+    </table>
+
+    <sect1 id="race-condition">
+    <title>Race Conditions and Critical Regions</title>
+    <para>
+      This overlap, where the result depends on the
+      relative timing of multiple tasks, is called a <firstterm>race condition</firstterm>.
+      The piece of code containing the concurrency issue is called a
+      <firstterm>critical region</firstterm>.  And especially since Linux starting running
+      on SMP machines, they became one of the major issues in kernel
+      design and implementation.
+    </para>
+    <para>
+      Preemption can have the same effect, even if there is only one
+      CPU: by preempting one task during the critical region, we have
+      exactly the same race condition.  In this case the thread which
+      preempts might run the critical region itself.
+    </para>
+    <para>
+      The solution is to recognize when these simultaneous accesses
+      occur, and use locks to make sure that only one instance can
+      enter the critical region at any time.  There are many
+      friendly primitives in the Linux kernel to help you do this.
+      And then there are the unfriendly primitives, but I'll pretend
+      they don't exist.
+    </para>
+    </sect1>
+  </chapter>
+
+  <chapter id="locks">
+   <title>Locking in the Linux Kernel</title>
+
+   <para>
+     If I could give you one piece of advice: never sleep with anyone
+     crazier than yourself.  But if I had to give you advice on
+     locking: <emphasis>keep it simple</emphasis>.
+   </para>
+
+   <para>
+     Be reluctant to introduce new locks.
+   </para>
+
+   <para>
+     Strangely enough, this last one is the exact reverse of my advice when
+     you <emphasis>have</emphasis> slept with someone crazier than yourself.
+     And you should think about getting a big dog.
+   </para>
+
+   <sect1 id="lock-intro">
+   <title>Two Main Types of Kernel Locks: Spinlocks and Mutexes</title>
+
+   <para>
+     There are two main types of kernel locks.  The fundamental type
+     is the spinlock 
+     (<filename class="headerfile">include/asm/spinlock.h</filename>),
+     which is a very simple single-holder lock: if you can't get the 
+     spinlock, you keep trying (spinning) until you can.  Spinlocks are 
+     very small and fast, and can be used anywhere.
+   </para>
+   <para>
+     The second type is a mutex
+     (<filename class="headerfile">include/linux/mutex.h</filename>): it
+     is like a spinlock, but you may block holding a mutex.
+     If you can't lock a mutex, your task will suspend itself, and be woken
+     up when the mutex is released.  This means the CPU can do something
+     else while you are waiting.  There are many cases when you simply
+     can't sleep (see <xref linkend="sleeping-things"/>), and so have to
+     use a spinlock instead.
+   </para>
+   <para>
+     Neither type of lock is recursive: see
+     <xref linkend="deadlock"/>.
+   </para>
+   </sect1>
+ 
+   <sect1 id="uniprocessor">
+    <title>Locks and Uniprocessor Kernels</title>
+
+    <para>
+      For kernels compiled without <symbol>CONFIG_SMP</symbol>, and
+      without <symbol>CONFIG_PREEMPT</symbol> spinlocks do not exist at
+      all.  This is an excellent design decision: when no-one else can
+      run at the same time, there is no reason to have a lock.
+    </para>
+
+    <para>
+      If the kernel is compiled without <symbol>CONFIG_SMP</symbol>,
+      but <symbol>CONFIG_PREEMPT</symbol> is set, then spinlocks
+      simply disable preemption, which is sufficient to prevent any
+      races.  For most purposes, we can think of preemption as
+      equivalent to SMP, and not worry about it separately.
+    </para>
+
+    <para>
+      You should always test your locking code with <symbol>CONFIG_SMP</symbol>
+      and <symbol>CONFIG_PREEMPT</symbol> enabled, even if you don't have an SMP test box, because it
+      will still catch some kinds of locking bugs.
+    </para>
+
+    <para>
+      Mutexes still exist, because they are required for
+      synchronization between <firstterm linkend="gloss-usercontext">user 
+      contexts</firstterm>, as we will see below.
+    </para>
+   </sect1>
+
+    <sect1 id="usercontextlocking">
+     <title>Locking Only In User Context</title>
+
+     <para>
+       If you have a data structure which is only ever accessed from
+       user context, then you can use a simple mutex
+       (<filename>include/linux/mutex.h</filename>) to protect it.  This
+       is the most trivial case: you initialize the mutex.  Then you can
+       call <function>mutex_lock_interruptible()</function> to grab the mutex,
+       and <function>mutex_unlock()</function> to release it.  There is also a 
+       <function>mutex_lock()</function>, which should be avoided, because it 
+       will not return if a signal is received.
+     </para>
+
+     <para>
+       Example: <filename>net/netfilter/nf_sockopt.c</filename> allows 
+       registration of new <function>setsockopt()</function> and 
+       <function>getsockopt()</function> calls, with
+       <function>nf_register_sockopt()</function>.  Registration and 
+       de-registration are only done on module load and unload (and boot 
+       time, where there is no concurrency), and the list of registrations 
+       is only consulted for an unknown <function>setsockopt()</function>
+       or <function>getsockopt()</function> system call.  The 
+       <varname>nf_sockopt_mutex</varname> is perfect to protect this,
+       especially since the setsockopt and getsockopt calls may well
+       sleep.
+     </para>
+   </sect1>
+
+   <sect1 id="lock-user-bh">
+    <title>Locking Between User Context and Softirqs</title>
+
+    <para>
+      If a <firstterm linkend="gloss-softirq">softirq</firstterm> shares
+      data with user context, you have two problems.  Firstly, the current 
+      user context can be interrupted by a softirq, and secondly, the
+      critical region could be entered from another CPU.  This is where
+      <function>spin_lock_bh()</function> 
+      (<filename class="headerfile">include/linux/spinlock.h</filename>) is
+      used.  It disables softirqs on that CPU, then grabs the lock.
+      <function>spin_unlock_bh()</function> does the reverse.  (The
+      '_bh' suffix is a historical reference to "Bottom Halves", the
+      old name for software interrupts.  It should really be
+      called spin_lock_softirq()' in a perfect world).
+    </para>
+
+    <para>
+      Note that you can also use <function>spin_lock_irq()</function>
+      or <function>spin_lock_irqsave()</function> here, which stop
+      hardware interrupts as well: see <xref linkend="hardirq-context"/>.
+    </para>
+
+    <para>
+      This works perfectly for <firstterm linkend="gloss-up"><acronym>UP
+      </acronym></firstterm> as well: the spin lock vanishes, and this macro 
+      simply becomes <function>local_bh_disable()</function>
+      (<filename class="headerfile">include/linux/interrupt.h</filename>), which
+      protects you from the softirq being run.
+    </para>
+   </sect1>
+
+   <sect1 id="lock-user-tasklet">
+    <title>Locking Between User Context and Tasklets</title>
+
+    <para>
+      This is exactly the same as above, because <firstterm
+      linkend="gloss-tasklet">tasklets</firstterm> are actually run
+      from a softirq.
+    </para>
+   </sect1>
+
+   <sect1 id="lock-user-timers">
+    <title>Locking Between User Context and Timers</title>
+
+    <para>
+      This, too, is exactly the same as above, because <firstterm
+      linkend="gloss-timers">timers</firstterm> are actually run from
+      a softirq.  From a locking point of view, tasklets and timers
+      are identical.
+    </para>
+   </sect1>
+
+   <sect1 id="lock-tasklets">
+    <title>Locking Between Tasklets/Timers</title>
+
+    <para>
+      Sometimes a tasklet or timer might want to share data with
+      another tasklet or timer.
+    </para>
+
+    <sect2 id="lock-tasklets-same">
+     <title>The Same Tasklet/Timer</title>
+     <para>
+       Since a tasklet is never run on two CPUs at once, you don't
+       need to worry about your tasklet being reentrant (running
+       twice at once), even on SMP.
+     </para>
+    </sect2>
+
+    <sect2 id="lock-tasklets-different">
+     <title>Different Tasklets/Timers</title>
+     <para>
+       If another tasklet/timer wants
+       to share data with your tasklet or timer , you will both need to use
+       <function>spin_lock()</function> and
+       <function>spin_unlock()</function> calls.  
+       <function>spin_lock_bh()</function> is
+       unnecessary here, as you are already in a tasklet, and
+       none will be run on the same CPU.
+     </para>
+    </sect2>
+   </sect1>
+
+   <sect1 id="lock-softirqs">
+    <title>Locking Between Softirqs</title>
+
+    <para>
+      Often a softirq might
+      want to share data with itself or a tasklet/timer.
+    </para>
+
+    <sect2 id="lock-softirqs-same">
+     <title>The Same Softirq</title>
+
+     <para>
+       The same softirq can run on the other CPUs: you can use a
+       per-CPU array (see <xref linkend="per-cpu"/>) for better
+       performance.  If you're going so far as to use a softirq,
+       you probably care about scalable performance enough
+       to justify the extra complexity.
+     </para>
+
+     <para>
+       You'll need to use <function>spin_lock()</function> and 
+       <function>spin_unlock()</function> for shared data.
+     </para>
+    </sect2>
+
+    <sect2 id="lock-softirqs-different">
+     <title>Different Softirqs</title>
+
+     <para>
+       You'll need to use <function>spin_lock()</function> and
+       <function>spin_unlock()</function> for shared data, whether it
+       be a timer, tasklet, different softirq or the same or another
+       softirq: any of them could be running on a different CPU.
+     </para>
+    </sect2>
+   </sect1>
+  </chapter>
+
+  <chapter id="hardirq-context">
+   <title>Hard IRQ Context</title>
+
+   <para>
+     Hardware interrupts usually communicate with a
+     tasklet or softirq.  Frequently this involves putting work in a
+     queue, which the softirq will take out.
+   </para>
+
+   <sect1 id="hardirq-softirq">
+    <title>Locking Between Hard IRQ and Softirqs/Tasklets</title>
+
+    <para>
+      If a hardware irq handler shares data with a softirq, you have
+      two concerns.  Firstly, the softirq processing can be
+      interrupted by a hardware interrupt, and secondly, the
+      critical region could be entered by a hardware interrupt on
+      another CPU.  This is where <function>spin_lock_irq()</function> is 
+      used.  It is defined to disable interrupts on that cpu, then grab 
+      the lock. <function>spin_unlock_irq()</function> does the reverse.
+    </para>
+
+    <para>
+      The irq handler does not to use
+      <function>spin_lock_irq()</function>, because the softirq cannot
+      run while the irq handler is running: it can use
+      <function>spin_lock()</function>, which is slightly faster.  The
+      only exception would be if a different hardware irq handler uses
+      the same lock: <function>spin_lock_irq()</function> will stop
+      that from interrupting us.
+    </para>
+
+    <para>
+      This works perfectly for UP as well: the spin lock vanishes,
+      and this macro simply becomes <function>local_irq_disable()</function>
+      (<filename class="headerfile">include/asm/smp.h</filename>), which
+      protects you from the softirq/tasklet/BH being run.
+    </para>
+
+    <para>
+      <function>spin_lock_irqsave()</function> 
+      (<filename>include/linux/spinlock.h</filename>) is a variant
+      which saves whether interrupts were on or off in a flags word,
+      which is passed to <function>spin_unlock_irqrestore()</function>.  This
+      means that the same code can be used inside an hard irq handler (where
+      interrupts are already off) and in softirqs (where the irq
+      disabling is required).
+    </para>
+
+    <para>
+      Note that softirqs (and hence tasklets and timers) are run on
+      return from hardware interrupts, so
+      <function>spin_lock_irq()</function> also stops these.  In that
+      sense, <function>spin_lock_irqsave()</function> is the most
+      general and powerful locking function.
+    </para>
+
+   </sect1>
+   <sect1 id="hardirq-hardirq">
+    <title>Locking Between Two Hard IRQ Handlers</title>
+    <para>
+      It is rare to have to share data between two IRQ handlers, but
+      if you do, <function>spin_lock_irqsave()</function> should be
+      used: it is architecture-specific whether all interrupts are
+      disabled inside irq handlers themselves.
+    </para>
+   </sect1>
+
+  </chapter>
+
+  <chapter id="cheatsheet">
+   <title>Cheat Sheet For Locking</title>
+   <para>
+     Pete Zaitcev gives the following summary:
+   </para>
+   <itemizedlist>
+      <listitem>
+	<para>
+          If you are in a process context (any syscall) and want to
+	lock other process out, use a mutex.  You can take a mutex
+	and sleep (<function>copy_from_user*(</function> or
+	<function>kmalloc(x,GFP_KERNEL)</function>).
+      </para>
+      </listitem>
+      <listitem>
+	<para>
+	Otherwise (== data can be touched in an interrupt), use
+	<function>spin_lock_irqsave()</function> and
+	<function>spin_unlock_irqrestore()</function>.
+	</para>
+      </listitem>
+      <listitem>
+	<para>
+	Avoid holding spinlock for more than 5 lines of code and
+	across any function call (except accessors like
+	<function>readb</function>).
+	</para>
+      </listitem>
+    </itemizedlist>
+
+   <sect1 id="minimum-lock-reqirements">
+   <title>Table of Minimum Requirements</title>
+
+   <para> The following table lists the <emphasis>minimum</emphasis>
+	locking requirements between various contexts.  In some cases,
+	the same context can only be running on one CPU at a time, so
+	no locking is required for that context (eg. a particular
+	thread can only run on one CPU at a time, but if it needs
+	shares data with another thread, locking is required).
+   </para>
+   <para>
+	Remember the advice above: you can always use
+	<function>spin_lock_irqsave()</function>, which is a superset
+	of all other spinlock primitives.
+   </para>
+
+   <table>
+<title>Table of Locking Requirements</title>
+<tgroup cols="11">
+<tbody>
+
+<row>
+<entry></entry>
+<entry>IRQ Handler A</entry>
+<entry>IRQ Handler B</entry>
+<entry>Softirq A</entry>
+<entry>Softirq B</entry>
+<entry>Tasklet A</entry>
+<entry>Tasklet B</entry>
+<entry>Timer A</entry>
+<entry>Timer B</entry>
+<entry>User Context A</entry>
+<entry>User Context B</entry>
+</row>
+
+<row>
+<entry>IRQ Handler A</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>IRQ Handler B</entry>
+<entry>SLIS</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>Softirq A</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+</row>
+
+<row>
+<entry>Softirq B</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+</row>
+
+<row>
+<entry>Tasklet A</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>Tasklet B</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>Timer A</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>Timer B</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>SL</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>User Context A</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>None</entry>
+</row>
+
+<row>
+<entry>User Context B</entry>
+<entry>SLI</entry>
+<entry>SLI</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>SLBH</entry>
+<entry>MLI</entry>
+<entry>None</entry>
+</row>
+
+</tbody>
+</tgroup>
+</table>
+
+   <table>
+<title>Legend for Locking Requirements Table</title>
+<tgroup cols="2">
+<tbody>
+
+<row>
+<entry>SLIS</entry>
+<entry>spin_lock_irqsave</entry>
+</row>
+<row>
+<entry>SLI</entry>
+<entry>spin_lock_irq</entry>
+</row>
+<row>
+<entry>SL</entry>
+<entry>spin_lock</entry>
+</row>
+<row>
+<entry>SLBH</entry>
+<entry>spin_lock_bh</entry>
+</row>
+<row>
+<entry>MLI</entry>
+<entry>mutex_lock_interruptible</entry>
+</row>
+
+</tbody>
+</tgroup>
+</table>
+
+</sect1>
+</chapter>
+
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+  <para>
+   There are functions that try to acquire a lock only once and immediately
+   return a value telling about success or failure to acquire the lock.
+   They can be used if you need no access to the data protected with the lock
+   when some other thread is holding the lock. You should acquire the lock
+   later if you then need access to the data protected with the lock.
+  </para>
+
+  <para>
+    <function>spin_trylock()</function> does not spin but returns non-zero if
+    it acquires the spinlock on the first try or 0 if not. This function can
+    be used in all contexts like <function>spin_lock</function>: you must have
+    disabled the contexts that might interrupt you and acquire the spin lock.
+  </para>
+
+  <para>
+    <function>mutex_trylock()</function> does not suspend your task
+    but returns non-zero if it could lock the mutex on the first try
+    or 0 if not. This function cannot be safely used in hardware or software
+    interrupt contexts despite not sleeping.
+  </para>
+</chapter>
+
+  <chapter id="Examples">
+   <title>Common Examples</title>
+    <para>
+Let's step through a simple example: a cache of number to name
+mappings.  The cache keeps a count of how often each of the objects is
+used, and when it gets full, throws out the least used one.
+
+    </para>
+
+   <sect1 id="examples-usercontext">
+    <title>All In User Context</title>
+    <para>
+For our first example, we assume that all operations are in user
+context (ie. from system calls), so we can sleep.  This means we can
+use a mutex to protect the cache and all the objects within
+it.  Here's the code:
+    </para>
+
+    <programlisting>
+#include &lt;linux/list.h&gt;
+#include &lt;linux/slab.h&gt;
+#include &lt;linux/string.h&gt;
+#include &lt;linux/mutex.h&gt;
+#include &lt;asm/errno.h&gt;
+
+struct object
+{
+        struct list_head list;
+        int id;
+        char name[32];
+        int popularity;
+};
+
+/* Protects the cache, cache_num, and the objects within it */
+static DEFINE_MUTEX(cache_lock);
+static LIST_HEAD(cache);
+static unsigned int cache_num = 0;
+#define MAX_CACHE_SIZE 10
+
+/* Must be holding cache_lock */
+static struct object *__cache_find(int id)
+{
+        struct object *i;
+
+        list_for_each_entry(i, &amp;cache, list)
+                if (i-&gt;id == id) {
+                        i-&gt;popularity++;
+                        return i;
+                }
+        return NULL;
+}
+
+/* Must be holding cache_lock */
+static void __cache_delete(struct object *obj)
+{
+        BUG_ON(!obj);
+        list_del(&amp;obj-&gt;list);
+        kfree(obj);
+        cache_num--;
+}
+
+/* Must be holding cache_lock */
+static void __cache_add(struct object *obj)
+{
+        list_add(&amp;obj-&gt;list, &amp;cache);
+        if (++cache_num > MAX_CACHE_SIZE) {
+                struct object *i, *outcast = NULL;
+                list_for_each_entry(i, &amp;cache, list) {
+                        if (!outcast || i-&gt;popularity &lt; outcast-&gt;popularity)
+                                outcast = i;
+                }
+                __cache_delete(outcast);
+        }
+}
+
+int cache_add(int id, const char *name)
+{
+        struct object *obj;
+
+        if ((obj = kmalloc(sizeof(*obj), GFP_KERNEL)) == NULL)
+                return -ENOMEM;
+
+        strlcpy(obj-&gt;name, name, sizeof(obj-&gt;name));
+        obj-&gt;id = id;
+        obj-&gt;popularity = 0;
+
+        mutex_lock(&amp;cache_lock);
+        __cache_add(obj);
+        mutex_unlock(&amp;cache_lock);
+        return 0;
+}
+
+void cache_delete(int id)
+{
+        mutex_lock(&amp;cache_lock);
+        __cache_delete(__cache_find(id));
+        mutex_unlock(&amp;cache_lock);
+}
+
+int cache_find(int id, char *name)
+{
+        struct object *obj;
+        int ret = -ENOENT;
+
+        mutex_lock(&amp;cache_lock);
+        obj = __cache_find(id);
+        if (obj) {
+                ret = 0;
+                strcpy(name, obj-&gt;name);
+        }
+        mutex_unlock(&amp;cache_lock);
+        return ret;
+}
+</programlisting>
+
+    <para>
+Note that we always make sure we have the cache_lock when we add,
+delete, or look up the cache: both the cache infrastructure itself and
+the contents of the objects are protected by the lock.  In this case
+it's easy, since we copy the data for the user, and never let them
+access the objects directly.
+    </para>
+    <para>
+There is a slight (and common) optimization here: in
+<function>cache_add</function> we set up the fields of the object
+before grabbing the lock.  This is safe, as no-one else can access it
+until we put it in cache.
+    </para>
+    </sect1>
+
+   <sect1 id="examples-interrupt">
+    <title>Accessing From Interrupt Context</title>
+    <para>
+Now consider the case where <function>cache_find</function> can be
+called from interrupt context: either a hardware interrupt or a
+softirq.  An example would be a timer which deletes object from the
+cache.
+    </para>
+    <para>
+The change is shown below, in standard patch format: the
+<symbol>-</symbol> are lines which are taken away, and the
+<symbol>+</symbol> are lines which are added.
+    </para>
+<programlisting>
+--- cache.c.usercontext	2003-12-09 13:58:54.000000000 +1100
++++ cache.c.interrupt	2003-12-09 14:07:49.000000000 +1100
+@@ -12,7 +12,7 @@
+         int popularity;
+ };
+
+-static DEFINE_MUTEX(cache_lock);
++static DEFINE_SPINLOCK(cache_lock);
+ static LIST_HEAD(cache);
+ static unsigned int cache_num = 0;
+ #define MAX_CACHE_SIZE 10
+@@ -55,6 +55,7 @@
+ int cache_add(int id, const char *name)
+ {
+         struct object *obj;
++        unsigned long flags;
+
+         if ((obj = kmalloc(sizeof(*obj), GFP_KERNEL)) == NULL)
+                 return -ENOMEM;
+@@ -63,30 +64,33 @@
+         obj-&gt;id = id;
+         obj-&gt;popularity = 0;
+
+-        mutex_lock(&amp;cache_lock);
++        spin_lock_irqsave(&amp;cache_lock, flags);
+         __cache_add(obj);
+-        mutex_unlock(&amp;cache_lock);
++        spin_unlock_irqrestore(&amp;cache_lock, flags);
+         return 0;
+ }
+
+ void cache_delete(int id)
+ {
+-        mutex_lock(&amp;cache_lock);
++        unsigned long flags;
++
++        spin_lock_irqsave(&amp;cache_lock, flags);
+         __cache_delete(__cache_find(id));
+-        mutex_unlock(&amp;cache_lock);
++        spin_unlock_irqrestore(&amp;cache_lock, flags);
+ }
+
+ int cache_find(int id, char *name)
+ {
+         struct object *obj;
+         int ret = -ENOENT;
++        unsigned long flags;
+
+-        mutex_lock(&amp;cache_lock);
++        spin_lock_irqsave(&amp;cache_lock, flags);
+         obj = __cache_find(id);
+         if (obj) {
+                 ret = 0;
+                 strcpy(name, obj-&gt;name);
+         }
+-        mutex_unlock(&amp;cache_lock);
++        spin_unlock_irqrestore(&amp;cache_lock, flags);
+         return ret;
+ }
+</programlisting>
+
+    <para>
+Note that the <function>spin_lock_irqsave</function> will turn off
+interrupts if they are on, otherwise does nothing (if we are already
+in an interrupt handler), hence these functions are safe to call from
+any context.
+    </para>
+    <para>
+Unfortunately, <function>cache_add</function> calls
+<function>kmalloc</function> with the <symbol>GFP_KERNEL</symbol>
+flag, which is only legal in user context.  I have assumed that
+<function>cache_add</function> is still only called in user context,
+otherwise this should become a parameter to
+<function>cache_add</function>.
+    </para>
+  </sect1>
+   <sect1 id="examples-refcnt">
+    <title>Exposing Objects Outside This File</title>
+    <para>
+If our objects contained more information, it might not be sufficient
+to copy the information in and out: other parts of the code might want
+to keep pointers to these objects, for example, rather than looking up
+the id every time.  This produces two problems.
+    </para>
+    <para>
+The first problem is that we use the <symbol>cache_lock</symbol> to
+protect objects: we'd need to make this non-static so the rest of the
+code can use it.  This makes locking trickier, as it is no longer all
+in one place.
+    </para>
+    <para>
+The second problem is the lifetime problem: if another structure keeps
+a pointer to an object, it presumably expects that pointer to remain
+valid.  Unfortunately, this is only guaranteed while you hold the
+lock, otherwise someone might call <function>cache_delete</function>
+and even worse, add another object, re-using the same address.
+    </para>
+    <para>
+As there is only one lock, you can't hold it forever: no-one else would
+get any work done.
+    </para>
+    <para>
+The solution to this problem is to use a reference count: everyone who
+has a pointer to the object increases it when they first get the
+object, and drops the reference count when they're finished with it.
+Whoever drops it to zero knows it is unused, and can actually delete it.
+    </para>
+    <para>
+Here is the code:
+    </para>
+
+<programlisting>
+--- cache.c.interrupt	2003-12-09 14:25:43.000000000 +1100
++++ cache.c.refcnt	2003-12-09 14:33:05.000000000 +1100
+@@ -7,6 +7,7 @@
+ struct object
+ {
+         struct list_head list;
++        unsigned int refcnt;
+         int id;
+         char name[32];
+         int popularity;
+@@ -17,6 +18,35 @@
+ static unsigned int cache_num = 0;
+ #define MAX_CACHE_SIZE 10
+
++static void __object_put(struct object *obj)
++{
++        if (--obj-&gt;refcnt == 0)
++                kfree(obj);
++}
++
++static void __object_get(struct object *obj)
++{
++        obj-&gt;refcnt++;
++}
++
++void object_put(struct object *obj)
++{
++        unsigned long flags;
++
++        spin_lock_irqsave(&amp;cache_lock, flags);
++        __object_put(obj);
++        spin_unlock_irqrestore(&amp;cache_lock, flags);
++}
++
++void object_get(struct object *obj)
++{
++        unsigned long flags;
++
++        spin_lock_irqsave(&amp;cache_lock, flags);
++        __object_get(obj);
++        spin_unlock_irqrestore(&amp;cache_lock, flags);
++}
++
+ /* Must be holding cache_lock */
+ static struct object *__cache_find(int id)
+ {
+@@ -35,6 +65,7 @@
+ {
+         BUG_ON(!obj);
+         list_del(&amp;obj-&gt;list);
++        __object_put(obj);
+         cache_num--;
+ }
+
+@@ -63,6 +94,7 @@
+         strlcpy(obj-&gt;name, name, sizeof(obj-&gt;name));
+         obj-&gt;id = id;
+         obj-&gt;popularity = 0;
++        obj-&gt;refcnt = 1; /* The cache holds a reference */
+
+         spin_lock_irqsave(&amp;cache_lock, flags);
+         __cache_add(obj);
+@@ -79,18 +111,15 @@
+         spin_unlock_irqrestore(&amp;cache_lock, flags);
+ }
+
+-int cache_find(int id, char *name)
++struct object *cache_find(int id)
+ {
+         struct object *obj;
+-        int ret = -ENOENT;
+         unsigned long flags;
+
+         spin_lock_irqsave(&amp;cache_lock, flags);
+         obj = __cache_find(id);
+-        if (obj) {
+-                ret = 0;
+-                strcpy(name, obj-&gt;name);
+-        }
++        if (obj)
++                __object_get(obj);
+         spin_unlock_irqrestore(&amp;cache_lock, flags);
+-        return ret;
++        return obj;
+ }
+</programlisting>
+
+<para>
+We encapsulate the reference counting in the standard 'get' and 'put'
+functions.  Now we can return the object itself from
+<function>cache_find</function> which has the advantage that the user
+can now sleep holding the object (eg. to
+<function>copy_to_user</function> to name to userspace).
+</para>
+<para>
+The other point to note is that I said a reference should be held for
+every pointer to the object: thus the reference count is 1 when first
+inserted into the cache.  In some versions the framework does not hold
+a reference count, but they are more complicated.
+</para>
+
+   <sect2 id="examples-refcnt-atomic">
+    <title>Using Atomic Operations For The Reference Count</title>
+<para>
+In practice, <type>atomic_t</type> would usually be used for
+<structfield>refcnt</structfield>.  There are a number of atomic
+operations defined in
+
+<filename class="headerfile">include/asm/atomic.h</filename>: these are
+guaranteed to be seen atomically from all CPUs in the system, so no
+lock is required.  In this case, it is simpler than using spinlocks,
+although for anything non-trivial using spinlocks is clearer.  The
+<function>atomic_inc</function> and
+<function>atomic_dec_and_test</function> are used instead of the
+standard increment and decrement operators, and the lock is no longer
+used to protect the reference count itself.
+</para>
+
+<programlisting>
+--- cache.c.refcnt	2003-12-09 15:00:35.000000000 +1100
++++ cache.c.refcnt-atomic	2003-12-11 15:49:42.000000000 +1100
+@@ -7,7 +7,7 @@
+ struct object
+ {
+         struct list_head list;
+-        unsigned int refcnt;
++        atomic_t refcnt;
+         int id;
+         char name[32];
+         int popularity;
+@@ -18,33 +18,15 @@
+ static unsigned int cache_num = 0;
+ #define MAX_CACHE_SIZE 10
+
+-static void __object_put(struct object *obj)
+-{
+-        if (--obj-&gt;refcnt == 0)
+-                kfree(obj);
+-}
+-
+-static void __object_get(struct object *obj)
+-{
+-        obj-&gt;refcnt++;
+-}
+-
+ void object_put(struct object *obj)
+ {
+-        unsigned long flags;
+-
+-        spin_lock_irqsave(&amp;cache_lock, flags);
+-        __object_put(obj);
+-        spin_unlock_irqrestore(&amp;cache_lock, flags);
++        if (atomic_dec_and_test(&amp;obj-&gt;refcnt))
++                kfree(obj);
+ }
+
+ void object_get(struct object *obj)
+ {
+-        unsigned long flags;
+-
+-        spin_lock_irqsave(&amp;cache_lock, flags);
+-        __object_get(obj);
+-        spin_unlock_irqrestore(&amp;cache_lock, flags);
++        atomic_inc(&amp;obj-&gt;refcnt);
+ }
+
+ /* Must be holding cache_lock */
+@@ -65,7 +47,7 @@
+ {
+         BUG_ON(!obj);
+         list_del(&amp;obj-&gt;list);
+-        __object_put(obj);
++        object_put(obj);
+         cache_num--;
+ }
+
+@@ -94,7 +76,7 @@
+         strlcpy(obj-&gt;name, name, sizeof(obj-&gt;name));
+         obj-&gt;id = id;
+         obj-&gt;popularity = 0;
+-        obj-&gt;refcnt = 1; /* The cache holds a reference */
++        atomic_set(&amp;obj-&gt;refcnt, 1); /* The cache holds a reference */
+
+         spin_lock_irqsave(&amp;cache_lock, flags);
+         __cache_add(obj);
+@@ -119,7 +101,7 @@
+         spin_lock_irqsave(&amp;cache_lock, flags);
+         obj = __cache_find(id);
+         if (obj)
+-                __object_get(obj);
++                object_get(obj);
+         spin_unlock_irqrestore(&amp;cache_lock, flags);
+         return obj;
+ }
+</programlisting>
+</sect2>
+</sect1>
+
+   <sect1 id="examples-lock-per-obj">
+    <title>Protecting The Objects Themselves</title>
+    <para>
+In these examples, we assumed that the objects (except the reference
+counts) never changed once they are created.  If we wanted to allow
+the name to change, there are three possibilities:
+    </para>
+    <itemizedlist>
+      <listitem>
+	<para>
+You can make <symbol>cache_lock</symbol> non-static, and tell people
+to grab that lock before changing the name in any object.
+        </para>
+      </listitem>
+      <listitem>
+        <para>
+You can provide a <function>cache_obj_rename</function> which grabs
+this lock and changes the name for the caller, and tell everyone to
+use that function.
+        </para>
+      </listitem>
+      <listitem>
+        <para>
+You can make the <symbol>cache_lock</symbol> protect only the cache
+itself, and use another lock to protect the name.
+        </para>
+      </listitem>
+    </itemizedlist>
+
+      <para>
+Theoretically, you can make the locks as fine-grained as one lock for
+every field, for every object.  In practice, the most common variants
+are:
+</para>
+    <itemizedlist>
+      <listitem>
+	<para>
+One lock which protects the infrastructure (the <symbol>cache</symbol>
+list in this example) and all the objects.  This is what we have done
+so far.
+	</para>
+      </listitem>
+      <listitem>
+        <para>
+One lock which protects the infrastructure (including the list
+pointers inside the objects), and one lock inside the object which
+protects the rest of that object.
+        </para>
+      </listitem>
+      <listitem>
+        <para>
+Multiple locks to protect the infrastructure (eg. one lock per hash
+chain), possibly with a separate per-object lock.
+        </para>
+      </listitem>
+    </itemizedlist>
+
+<para>
+Here is the "lock-per-object" implementation:
+</para>
+<programlisting>
+--- cache.c.refcnt-atomic	2003-12-11 15:50:54.000000000 +1100
++++ cache.c.perobjectlock	2003-12-11 17:15:03.000000000 +1100
+@@ -6,11 +6,17 @@
+
+ struct object
+ {
++        /* These two protected by cache_lock. */
+         struct list_head list;
++        int popularity;
++
+         atomic_t refcnt;
++
++        /* Doesn't change once created. */
+         int id;
++
++        spinlock_t lock; /* Protects the name */
+         char name[32];
+-        int popularity;
+ };
+
+ static DEFINE_SPINLOCK(cache_lock);
+@@ -77,6 +84,7 @@
+         obj-&gt;id = id;
+         obj-&gt;popularity = 0;
+         atomic_set(&amp;obj-&gt;refcnt, 1); /* The cache holds a reference */
++        spin_lock_init(&amp;obj-&gt;lock);
+
+         spin_lock_irqsave(&amp;cache_lock, flags);
+         __cache_add(obj);
+</programlisting>
+
+<para>
+Note that I decide that the <structfield>popularity</structfield>
+count should be protected by the <symbol>cache_lock</symbol> rather
+than the per-object lock: this is because it (like the
+<structname>struct list_head</structname> inside the object) is
+logically part of the infrastructure.  This way, I don't need to grab
+the lock of every object in <function>__cache_add</function> when
+seeking the least popular.
+</para>
+
+<para>
+I also decided that the <structfield>id</structfield> member is
+unchangeable, so I don't need to grab each object lock in
+<function>__cache_find()</function> to examine the
+<structfield>id</structfield>: the object lock is only used by a
+caller who wants to read or write the <structfield>name</structfield>
+field.
+</para>
+
+<para>
+Note also that I added a comment describing what data was protected by
+which locks.  This is extremely important, as it describes the runtime
+behavior of the code, and can be hard to gain from just reading.  And
+as Alan Cox says, <quote>Lock data, not code</quote>.
+</para>
+</sect1>
+</chapter>
+
+   <chapter id="common-problems">
+    <title>Common Problems</title>
+    <sect1 id="deadlock">
+    <title>Deadlock: Simple and Advanced</title>
+
+    <para>
+      There is a coding bug where a piece of code tries to grab a
+      spinlock twice: it will spin forever, waiting for the lock to
+      be released (spinlocks, rwlocks and mutexes are not
+      recursive in Linux).  This is trivial to diagnose: not a
+      stay-up-five-nights-talk-to-fluffy-code-bunnies kind of
+      problem.
+    </para>
+
+    <para>
+      For a slightly more complex case, imagine you have a region
+      shared by a softirq and user context.  If you use a
+      <function>spin_lock()</function> call to protect it, it is 
+      possible that the user context will be interrupted by the softirq
+      while it holds the lock, and the softirq will then spin
+      forever trying to get the same lock.
+    </para>
+
+    <para>
+      Both of these are called deadlock, and as shown above, it can
+      occur even with a single CPU (although not on UP compiles,
+      since spinlocks vanish on kernel compiles with 
+      <symbol>CONFIG_SMP</symbol>=n. You'll still get data corruption 
+      in the second example).
+    </para>
+
+    <para>
+      This complete lockup is easy to diagnose: on SMP boxes the
+      watchdog timer or compiling with <symbol>DEBUG_SPINLOCK</symbol> set
+      (<filename>include/linux/spinlock.h</filename>) will show this up 
+      immediately when it happens.
+    </para>
+
+    <para>
+      A more complex problem is the so-called 'deadly embrace',
+      involving two or more locks.  Say you have a hash table: each
+      entry in the table is a spinlock, and a chain of hashed
+      objects.  Inside a softirq handler, you sometimes want to
+      alter an object from one place in the hash to another: you
+      grab the spinlock of the old hash chain and the spinlock of
+      the new hash chain, and delete the object from the old one,
+      and insert it in the new one.
+    </para>
+
+    <para>
+      There are two problems here.  First, if your code ever
+      tries to move the object to the same chain, it will deadlock
+      with itself as it tries to lock it twice.  Secondly, if the
+      same softirq on another CPU is trying to move another object
+      in the reverse direction, the following could happen:
+    </para>
+
+    <table>
+     <title>Consequences</title>
+
+     <tgroup cols="2" align="left">
+
+      <thead>
+       <row>
+        <entry>CPU 1</entry>
+        <entry>CPU 2</entry>
+       </row>
+      </thead>
+
+      <tbody>
+       <row>
+        <entry>Grab lock A -&gt; OK</entry>
+        <entry>Grab lock B -&gt; OK</entry>
+       </row>
+       <row>
+        <entry>Grab lock B -&gt; spin</entry>
+        <entry>Grab lock A -&gt; spin</entry>
+       </row>
+      </tbody>
+     </tgroup>
+    </table>
+
+    <para>
+      The two CPUs will spin forever, waiting for the other to give up
+      their lock.  It will look, smell, and feel like a crash.
+    </para>
+    </sect1>
+
+    <sect1 id="techs-deadlock-prevent">
+     <title>Preventing Deadlock</title>
+
+     <para>
+       Textbooks will tell you that if you always lock in the same
+       order, you will never get this kind of deadlock.  Practice
+       will tell you that this approach doesn't scale: when I
+       create a new lock, I don't understand enough of the kernel
+       to figure out where in the 5000 lock hierarchy it will fit.
+     </para>
+
+     <para>
+       The best locks are encapsulated: they never get exposed in
+       headers, and are never held around calls to non-trivial
+       functions outside the same file.  You can read through this
+       code and see that it will never deadlock, because it never
+       tries to grab another lock while it has that one.  People
+       using your code don't even need to know you are using a
+       lock.
+     </para>
+
+     <para>
+       A classic problem here is when you provide callbacks or
+       hooks: if you call these with the lock held, you risk simple
+       deadlock, or a deadly embrace (who knows what the callback
+       will do?).  Remember, the other programmers are out to get
+       you, so don't do this.
+     </para>
+
+    <sect2 id="techs-deadlock-overprevent">
+     <title>Overzealous Prevention Of Deadlocks</title>
+
+     <para>
+       Deadlocks are problematic, but not as bad as data
+       corruption.  Code which grabs a read lock, searches a list,
+       fails to find what it wants, drops the read lock, grabs a
+       write lock and inserts the object has a race condition.
+     </para>
+
+     <para>
+       If you don't see why, please stay the fuck away from my code.
+     </para>
+    </sect2>
+    </sect1>
+
+   <sect1 id="racing-timers">
+    <title>Racing Timers: A Kernel Pastime</title>
+
+    <para>
+      Timers can produce their own special problems with races.
+      Consider a collection of objects (list, hash, etc) where each
+      object has a timer which is due to destroy it.
+    </para>
+
+    <para>
+      If you want to destroy the entire collection (say on module
+      removal), you might do the following:
+    </para>
+
+    <programlisting>
+        /* THIS CODE BAD BAD BAD BAD: IF IT WAS ANY WORSE IT WOULD USE
+           HUNGARIAN NOTATION */
+        spin_lock_bh(&amp;list_lock);
+
+        while (list) {
+                struct foo *next = list-&gt;next;
+                del_timer(&amp;list-&gt;timer);
+                kfree(list);
+                list = next;
+        }
+
+        spin_unlock_bh(&amp;list_lock);
+    </programlisting>
+
+    <para>
+      Sooner or later, this will crash on SMP, because a timer can
+      have just gone off before the <function>spin_lock_bh()</function>,
+      and it will only get the lock after we
+      <function>spin_unlock_bh()</function>, and then try to free
+      the element (which has already been freed!).
+    </para>
+
+    <para>
+      This can be avoided by checking the result of
+      <function>del_timer()</function>: if it returns
+      <returnvalue>1</returnvalue>, the timer has been deleted.
+      If <returnvalue>0</returnvalue>, it means (in this
+      case) that it is currently running, so we can do:
+    </para>
+
+    <programlisting>
+        retry:
+                spin_lock_bh(&amp;list_lock);
+
+                while (list) {
+                        struct foo *next = list-&gt;next;
+                        if (!del_timer(&amp;list-&gt;timer)) {
+                                /* Give timer a chance to delete this */
+                                spin_unlock_bh(&amp;list_lock);
+                                goto retry;
+                        }
+                        kfree(list);
+                        list = next;
+                }
+
+                spin_unlock_bh(&amp;list_lock);
+    </programlisting>
+
+    <para>
+      Another common problem is deleting timers which restart
+      themselves (by calling <function>add_timer()</function> at the end
+      of their timer function).  Because this is a fairly common case
+      which is prone to races, you should use <function>del_timer_sync()</function>
+      (<filename class="headerfile">include/linux/timer.h</filename>)
+      to handle this case.  It returns the number of times the timer
+      had to be deleted before we finally stopped it from adding itself back
+      in.
+    </para>
+   </sect1>
+
+  </chapter>
+
+ <chapter id="Efficiency">
+    <title>Locking Speed</title>
+
+    <para>
+There are three main things to worry about when considering speed of
+some code which does locking.  First is concurrency: how many things
+are going to be waiting while someone else is holding a lock.  Second
+is the time taken to actually acquire and release an uncontended lock.
+Third is using fewer, or smarter locks.  I'm assuming that the lock is
+used fairly often: otherwise, you wouldn't be concerned about
+efficiency.
+</para>
+    <para>
+Concurrency depends on how long the lock is usually held: you should
+hold the lock for as long as needed, but no longer.  In the cache
+example, we always create the object without the lock held, and then
+grab the lock only when we are ready to insert it in the list.
+</para>
+    <para>
+Acquisition times depend on how much damage the lock operations do to
+the pipeline (pipeline stalls) and how likely it is that this CPU was
+the last one to grab the lock (ie. is the lock cache-hot for this
+CPU): on a machine with more CPUs, this likelihood drops fast.
+Consider a 700MHz Intel Pentium III: an instruction takes about 0.7ns,
+an atomic increment takes about 58ns, a lock which is cache-hot on
+this CPU takes 160ns, and a cacheline transfer from another CPU takes
+an additional 170 to 360ns.  (These figures from Paul McKenney's
+<ulink url="http://www.linuxjournal.com/article.php?sid=6993"> Linux
+Journal RCU article</ulink>).
+</para>
+    <para>
+These two aims conflict: holding a lock for a short time might be done
+by splitting locks into parts (such as in our final per-object-lock
+example), but this increases the number of lock acquisitions, and the
+results are often slower than having a single lock.  This is another
+reason to advocate locking simplicity.
+</para>
+    <para>
+The third concern is addressed below: there are some methods to reduce
+the amount of locking which needs to be done.
+</para>
+
+  <sect1 id="efficiency-rwlocks">
+   <title>Read/Write Lock Variants</title>
+
+   <para>
+      Both spinlocks and mutexes have read/write variants:
+      <type>rwlock_t</type> and <structname>struct rw_semaphore</structname>.
+      These divide users into two classes: the readers and the writers.  If
+      you are only reading the data, you can get a read lock, but to write to
+      the data you need the write lock.  Many people can hold a read lock,
+      but a writer must be sole holder.
+    </para>
+
+   <para>
+      If your code divides neatly along reader/writer lines (as our
+      cache code does), and the lock is held by readers for
+      significant lengths of time, using these locks can help.  They
+      are slightly slower than the normal locks though, so in practice
+      <type>rwlock_t</type> is not usually worthwhile.
+    </para>
+   </sect1>
+
+   <sect1 id="efficiency-read-copy-update">
+    <title>Avoiding Locks: Read Copy Update</title>
+
+    <para>
+      There is a special method of read/write locking called Read Copy
+      Update.  Using RCU, the readers can avoid taking a lock
+      altogether: as we expect our cache to be read more often than
+      updated (otherwise the cache is a waste of time), it is a
+      candidate for this optimization.
+    </para>
+
+    <para>
+      How do we get rid of read locks?  Getting rid of read locks
+      means that writers may be changing the list underneath the
+      readers.  That is actually quite simple: we can read a linked
+      list while an element is being added if the writer adds the
+      element very carefully.  For example, adding
+      <symbol>new</symbol> to a single linked list called
+      <symbol>list</symbol>:
+    </para>
+
+    <programlisting>
+        new-&gt;next = list-&gt;next;
+        wmb();
+        list-&gt;next = new;
+    </programlisting>
+
+    <para>
+      The <function>wmb()</function> is a write memory barrier.  It
+      ensures that the first operation (setting the new element's
+      <symbol>next</symbol> pointer) is complete and will be seen by
+      all CPUs, before the second operation is (putting the new
+      element into the list).  This is important, since modern
+      compilers and modern CPUs can both reorder instructions unless
+      told otherwise: we want a reader to either not see the new
+      element at all, or see the new element with the
+      <symbol>next</symbol> pointer correctly pointing at the rest of
+      the list.
+    </para>
+    <para>
+      Fortunately, there is a function to do this for standard
+      <structname>struct list_head</structname> lists:
+      <function>list_add_rcu()</function>
+      (<filename>include/linux/list.h</filename>).
+    </para>
+    <para>
+      Removing an element from the list is even simpler: we replace
+      the pointer to the old element with a pointer to its successor,
+      and readers will either see it, or skip over it.
+    </para>
+    <programlisting>
+        list-&gt;next = old-&gt;next;
+    </programlisting>
+    <para>
+      There is <function>list_del_rcu()</function>
+      (<filename>include/linux/list.h</filename>) which does this (the
+      normal version poisons the old object, which we don't want).
+    </para>
+    <para>
+      The reader must also be careful: some CPUs can look through the
+      <symbol>next</symbol> pointer to start reading the contents of
+      the next element early, but don't realize that the pre-fetched
+      contents is wrong when the <symbol>next</symbol> pointer changes
+      underneath them.  Once again, there is a
+      <function>list_for_each_entry_rcu()</function>
+      (<filename>include/linux/list.h</filename>) to help you.  Of
+      course, writers can just use
+      <function>list_for_each_entry()</function>, since there cannot
+      be two simultaneous writers.
+    </para>
+    <para>
+      Our final dilemma is this: when can we actually destroy the
+      removed element?  Remember, a reader might be stepping through
+      this element in the list right now: if we free this element and
+      the <symbol>next</symbol> pointer changes, the reader will jump
+      off into garbage and crash.  We need to wait until we know that
+      all the readers who were traversing the list when we deleted the
+      element are finished.  We use <function>call_rcu()</function> to
+      register a callback which will actually destroy the object once
+      all pre-existing readers are finished.  Alternatively,
+      <function>synchronize_rcu()</function> may be used to block until
+      all pre-existing are finished.
+    </para>
+    <para>
+      But how does Read Copy Update know when the readers are
+      finished?  The method is this: firstly, the readers always
+      traverse the list inside
+      <function>rcu_read_lock()</function>/<function>rcu_read_unlock()</function>
+      pairs: these simply disable preemption so the reader won't go to
+      sleep while reading the list.
+    </para>
+    <para>
+      RCU then waits until every other CPU has slept at least once:
+      since readers cannot sleep, we know that any readers which were
+      traversing the list during the deletion are finished, and the
+      callback is triggered.  The real Read Copy Update code is a
+      little more optimized than this, but this is the fundamental
+      idea.
+    </para>
+
+<programlisting>
+--- cache.c.perobjectlock	2003-12-11 17:15:03.000000000 +1100
++++ cache.c.rcupdate	2003-12-11 17:55:14.000000000 +1100
+@@ -1,15 +1,18 @@
+ #include &lt;linux/list.h&gt;
+ #include &lt;linux/slab.h&gt;
+ #include &lt;linux/string.h&gt;
++#include &lt;linux/rcupdate.h&gt;
+ #include &lt;linux/mutex.h&gt;
+ #include &lt;asm/errno.h&gt;
+
+ struct object
+ {
+-        /* These two protected by cache_lock. */
++        /* This is protected by RCU */
+         struct list_head list;
+         int popularity;
+
++        struct rcu_head rcu;
++
+         atomic_t refcnt;
+
+         /* Doesn't change once created. */
+@@ -40,7 +43,7 @@
+ {
+         struct object *i;
+
+-        list_for_each_entry(i, &amp;cache, list) {
++        list_for_each_entry_rcu(i, &amp;cache, list) {
+                 if (i-&gt;id == id) {
+                         i-&gt;popularity++;
+                         return i;
+@@ -49,19 +52,25 @@
+         return NULL;
+ }
+
++/* Final discard done once we know no readers are looking. */
++static void cache_delete_rcu(void *arg)
++{
++        object_put(arg);
++}
++
+ /* Must be holding cache_lock */
+ static void __cache_delete(struct object *obj)
+ {
+         BUG_ON(!obj);
+-        list_del(&amp;obj-&gt;list);
+-        object_put(obj);
++        list_del_rcu(&amp;obj-&gt;list);
+         cache_num--;
++        call_rcu(&amp;obj-&gt;rcu, cache_delete_rcu);
+ }
+
+ /* Must be holding cache_lock */
+ static void __cache_add(struct object *obj)
+ {
+-        list_add(&amp;obj-&gt;list, &amp;cache);
++        list_add_rcu(&amp;obj-&gt;list, &amp;cache);
+         if (++cache_num > MAX_CACHE_SIZE) {
+                 struct object *i, *outcast = NULL;
+                 list_for_each_entry(i, &amp;cache, list) {
+@@ -104,12 +114,11 @@
+ struct object *cache_find(int id)
+ {
+         struct object *obj;
+-        unsigned long flags;
+
+-        spin_lock_irqsave(&amp;cache_lock, flags);
++        rcu_read_lock();
+         obj = __cache_find(id);
+         if (obj)
+                 object_get(obj);
+-        spin_unlock_irqrestore(&amp;cache_lock, flags);
++        rcu_read_unlock();
+         return obj;
+ }
+</programlisting>
+
+<para>
+Note that the reader will alter the
+<structfield>popularity</structfield> member in
+<function>__cache_find()</function>, and now it doesn't hold a lock.
+One solution would be to make it an <type>atomic_t</type>, but for
+this usage, we don't really care about races: an approximate result is
+good enough, so I didn't change it.
+</para>
+
+<para>
+The result is that <function>cache_find()</function> requires no
+synchronization with any other functions, so is almost as fast on SMP
+as it would be on UP.
+</para>
+
+<para>
+There is a furthur optimization possible here: remember our original
+cache code, where there were no reference counts and the caller simply
+held the lock whenever using the object?  This is still possible: if
+you hold the lock, no one can delete the object, so you don't need to
+get and put the reference count.
+</para>
+
+<para>
+Now, because the 'read lock' in RCU is simply disabling preemption, a
+caller which always has preemption disabled between calling
+<function>cache_find()</function> and
+<function>object_put()</function> does not need to actually get and
+put the reference count: we could expose
+<function>__cache_find()</function> by making it non-static, and
+such callers could simply call that.
+</para>
+<para>
+The benefit here is that the reference count is not written to: the
+object is not altered in any way, which is much faster on SMP
+machines due to caching.
+</para>
+  </sect1>
+
+   <sect1 id="per-cpu">
+    <title>Per-CPU Data</title>
+
+    <para>
+      Another technique for avoiding locking which is used fairly
+      widely is to duplicate information for each CPU.  For example,
+      if you wanted to keep a count of a common condition, you could
+      use a spin lock and a single counter.  Nice and simple.
+    </para>
+
+    <para>
+      If that was too slow (it's usually not, but if you've got a
+      really big machine to test on and can show that it is), you
+      could instead use a counter for each CPU, then none of them need
+      an exclusive lock.  See <function>DEFINE_PER_CPU()</function>,
+      <function>get_cpu_var()</function> and
+      <function>put_cpu_var()</function>
+      (<filename class="headerfile">include/linux/percpu.h</filename>).
+    </para>
+
+    <para>
+      Of particular use for simple per-cpu counters is the
+      <type>local_t</type> type, and the
+      <function>cpu_local_inc()</function> and related functions,
+      which are more efficient than simple code on some architectures
+      (<filename class="headerfile">include/asm/local.h</filename>).
+    </para>
+
+    <para>
+      Note that there is no simple, reliable way of getting an exact
+      value of such a counter, without introducing more locks.  This
+      is not a problem for some uses.
+    </para>
+   </sect1>
+
+   <sect1 id="mostly-hardirq">
+    <title>Data Which Mostly Used By An IRQ Handler</title>
+
+    <para>
+      If data is always accessed from within the same IRQ handler, you
+      don't need a lock at all: the kernel already guarantees that the
+      irq handler will not run simultaneously on multiple CPUs.
+    </para>
+    <para>
+      Manfred Spraul points out that you can still do this, even if
+      the data is very occasionally accessed in user context or
+      softirqs/tasklets.  The irq handler doesn't use a lock, and
+      all other accesses are done as so:
+    </para>
+
+<programlisting>
+	spin_lock(&amp;lock);
+	disable_irq(irq);
+	...
+	enable_irq(irq);
+	spin_unlock(&amp;lock);
+</programlisting>
+    <para>
+      The <function>disable_irq()</function> prevents the irq handler
+      from running (and waits for it to finish if it's currently
+      running on other CPUs).  The spinlock prevents any other
+      accesses happening at the same time.  Naturally, this is slower
+      than just a <function>spin_lock_irq()</function> call, so it
+      only makes sense if this type of access happens extremely
+      rarely.
+    </para>
+   </sect1>
+  </chapter>
+
+ <chapter id="sleeping-things">
+    <title>What Functions Are Safe To Call From Interrupts?</title>
+
+    <para>
+      Many functions in the kernel sleep (ie. call schedule())
+      directly or indirectly: you can never call them while holding a
+      spinlock, or with preemption disabled.  This also means you need
+      to be in user context: calling them from an interrupt is illegal.
+    </para>
+
+   <sect1 id="sleeping">
+    <title>Some Functions Which Sleep</title>
+
+    <para>
+      The most common ones are listed below, but you usually have to
+      read the code to find out if other calls are safe.  If everyone
+      else who calls it can sleep, you probably need to be able to
+      sleep, too.  In particular, registration and deregistration
+      functions usually expect to be called from user context, and can
+      sleep.
+    </para>
+
+    <itemizedlist>
+     <listitem>
+      <para>
+        Accesses to 
+        <firstterm linkend="gloss-userspace">userspace</firstterm>:
+      </para>
+      <itemizedlist>
+       <listitem>
+        <para>
+          <function>copy_from_user()</function>
+        </para>
+       </listitem>
+       <listitem>
+        <para>
+          <function>copy_to_user()</function>
+        </para>
+       </listitem>
+       <listitem>
+        <para>
+          <function>get_user()</function>
+        </para>
+       </listitem>
+       <listitem>
+        <para>
+          <function>put_user()</function>
+        </para>
+       </listitem>
+      </itemizedlist>
+     </listitem>
+
+     <listitem>
+      <para>
+        <function>kmalloc(GFP_KERNEL)</function>
+      </para>
+     </listitem>
+
+     <listitem>
+      <para>
+      <function>mutex_lock_interruptible()</function> and
+      <function>mutex_lock()</function>
+      </para>
+      <para>
+       There is a <function>mutex_trylock()</function> which does not
+       sleep.  Still, it must not be used inside interrupt context since
+       its implementation is not safe for that.
+       <function>mutex_unlock()</function> will also never sleep.
+       It cannot be used in interrupt context either since a mutex
+       must be released by the same task that acquired it.
+      </para>
+     </listitem>
+    </itemizedlist>
+   </sect1>
+
+   <sect1 id="dont-sleep">
+    <title>Some Functions Which Don't Sleep</title>
+
+    <para>
+     Some functions are safe to call from any context, or holding
+     almost any lock.
+    </para>
+
+    <itemizedlist>
+     <listitem>
+      <para>
+	<function>printk()</function>
+      </para>
+     </listitem>
+     <listitem>
+      <para>
+        <function>kfree()</function>
+      </para>
+     </listitem>
+     <listitem>
+      <para>
+	<function>add_timer()</function> and <function>del_timer()</function>
+      </para>
+     </listitem>
+    </itemizedlist>
+   </sect1>
+  </chapter>
+
+  <chapter id="apiref">
+   <title>Mutex API reference</title>
+!Iinclude/linux/mutex.h
+!Ekernel/mutex.c
+  </chapter>
+
+  <chapter id="references">
+   <title>Further reading</title>
+
+   <itemizedlist>
+    <listitem>
+     <para>
+       <filename>Documentation/spinlocks.txt</filename>: 
+       Linus Torvalds' spinlocking tutorial in the kernel sources.
+     </para>
+    </listitem>
+
+    <listitem>
+     <para>
+       Unix Systems for Modern Architectures: Symmetric
+       Multiprocessing and Caching for Kernel Programmers:
+     </para>
+
+     <para>
+       Curt Schimmel's very good introduction to kernel level
+       locking (not written for Linux, but nearly everything
+       applies).  The book is expensive, but really worth every
+       penny to understand SMP locking. [ISBN: 0201633388]
+     </para>
+    </listitem>
+   </itemizedlist>
+  </chapter>
+
+  <chapter id="thanks">
+    <title>Thanks</title>
+
+    <para>
+      Thanks to Telsa Gwynne for DocBooking, neatening and adding
+      style.
+    </para>
+
+    <para>
+      Thanks to Martin Pool, Philipp Rumpf, Stephen Rothwell, Paul
+      Mackerras, Ruedi Aschwanden, Alan Cox, Manfred Spraul, Tim
+      Waugh, Pete Zaitcev, James Morris, Robert Love, Paul McKenney,
+      John Ashby for proofreading, correcting, flaming, commenting.
+    </para>
+
+    <para>
+      Thanks to the cabal for having no influence on this document.
+    </para>
+  </chapter>
+
+  <glossary id="glossary">
+   <title>Glossary</title>
+
+   <glossentry id="gloss-preemption">
+    <glossterm>preemption</glossterm>
+     <glossdef>
+      <para>
+        Prior to 2.5, or when <symbol>CONFIG_PREEMPT</symbol> is
+        unset, processes in user context inside the kernel would not
+        preempt each other (ie. you had that CPU until you gave it up,
+        except for interrupts).  With the addition of
+        <symbol>CONFIG_PREEMPT</symbol> in 2.5.4, this changed: when
+        in user context, higher priority tasks can "cut in": spinlocks
+        were changed to disable preemption, even on UP.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-bh">
+    <glossterm>bh</glossterm>
+     <glossdef>
+      <para>
+        Bottom Half: for historical reasons, functions with
+        '_bh' in them often now refer to any software interrupt, e.g.
+        <function>spin_lock_bh()</function> blocks any software interrupt 
+        on the current CPU.  Bottom halves are deprecated, and will 
+        eventually be replaced by tasklets.  Only one bottom half will be 
+        running at any time.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-hwinterrupt">
+    <glossterm>Hardware Interrupt / Hardware IRQ</glossterm>
+    <glossdef>
+     <para>
+       Hardware interrupt request.  <function>in_irq()</function> returns 
+       <returnvalue>true</returnvalue> in a hardware interrupt handler.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-interruptcontext">
+    <glossterm>Interrupt Context</glossterm>
+    <glossdef>
+     <para>
+       Not user context: processing a hardware irq or software irq.
+       Indicated by the <function>in_interrupt()</function> macro 
+       returning <returnvalue>true</returnvalue>.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-smp">
+    <glossterm><acronym>SMP</acronym></glossterm>
+    <glossdef>
+     <para>
+       Symmetric Multi-Processor: kernels compiled for multiple-CPU
+       machines.  (CONFIG_SMP=y).
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-softirq">
+    <glossterm>Software Interrupt / softirq</glossterm>
+    <glossdef>
+     <para>
+       Software interrupt handler.  <function>in_irq()</function> returns
+       <returnvalue>false</returnvalue>; <function>in_softirq()</function>
+       returns <returnvalue>true</returnvalue>.  Tasklets and softirqs
+	both fall into the category of 'software interrupts'.
+     </para>
+     <para>
+       Strictly speaking a softirq is one of up to 32 enumerated software
+       interrupts which can run on multiple CPUs at once.
+       Sometimes used to refer to tasklets as
+       well (ie. all software interrupts).
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-tasklet">
+    <glossterm>tasklet</glossterm>
+    <glossdef>
+     <para>
+       A dynamically-registrable software interrupt,
+       which is guaranteed to only run on one CPU at a time.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-timers">
+    <glossterm>timer</glossterm>
+    <glossdef>
+     <para>
+       A dynamically-registrable software interrupt, which is run at
+       (or close to) a given time.  When running, it is just like a
+       tasklet (in fact, they are called from the TIMER_SOFTIRQ).
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-up">
+    <glossterm><acronym>UP</acronym></glossterm>
+    <glossdef>
+     <para>
+       Uni-Processor: Non-SMP.  (CONFIG_SMP=n).
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-usercontext">
+    <glossterm>User Context</glossterm>
+    <glossdef>
+     <para>
+       The kernel executing on behalf of a particular process (ie. a
+       system call or trap) or kernel thread.  You can tell which
+       process with the <symbol>current</symbol> macro.)  Not to
+       be confused with userspace.  Can be interrupted by software or
+       hardware interrupts.
+     </para>
+    </glossdef>
+   </glossentry>
+
+   <glossentry id="gloss-userspace">
+    <glossterm>Userspace</glossterm>
+    <glossdef>
+     <para>
+       A process executing its own code outside the kernel.
+     </para>
+    </glossdef>
+   </glossentry>      
+
+  </glossary>
+</book>
+

linux-imx/Documentation/DocBook/kgdb.tmpl

diff --git a/linux-imx/Documentation/DocBook/kgdb.tmpl b/linux-imx/Documentation/DocBook/kgdb.tmpl
new file mode 100644
index 0000000..f77358f
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/kgdb.tmpl
@@ -0,0 +1,917 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="kgdbOnLinux">
+ <bookinfo>
+  <title>Using kgdb, kdb and the kernel debugger internals</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Jason</firstname>
+    <surname>Wessel</surname>
+    <affiliation>
+     <address>
+      <email>jason.wessel@windriver.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+  <copyright>
+   <year>2008,2010</year>
+   <holder>Wind River Systems, Inc.</holder>
+  </copyright>
+  <copyright>
+   <year>2004-2005</year>
+   <holder>MontaVista Software, Inc.</holder>
+  </copyright>
+  <copyright>
+   <year>2004</year>
+   <holder>Amit S. Kale</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+   This file is licensed under the terms of the GNU General Public License
+   version 2. This program is licensed "as is" without any warranty of any
+   kind, whether express or implied.
+   </para>
+
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+  <chapter id="Introduction">
+    <title>Introduction</title>
+    <para>
+    The kernel has two different debugger front ends (kdb and kgdb)
+    which interface to the debug core.  It is possible to use either
+    of the debugger front ends and dynamically transition between them
+    if you configure the kernel properly at compile and runtime.
+    </para>
+    <para>
+    Kdb is simplistic shell-style interface which you can use on a
+    system console with a keyboard or serial console.  You can use it
+    to inspect memory, registers, process lists, dmesg, and even set
+    breakpoints to stop in a certain location.  Kdb is not a source
+    level debugger, although you can set breakpoints and execute some
+    basic kernel run control.  Kdb is mainly aimed at doing some
+    analysis to aid in development or diagnosing kernel problems.  You
+    can access some symbols by name in kernel built-ins or in kernel
+    modules if the code was built
+    with <symbol>CONFIG_KALLSYMS</symbol>.
+    </para>
+    <para>
+    Kgdb is intended to be used as a source level debugger for the
+    Linux kernel. It is used along with gdb to debug a Linux kernel.
+    The expectation is that gdb can be used to "break in" to the
+    kernel to inspect memory, variables and look through call stack
+    information similar to the way an application developer would use
+    gdb to debug an application.  It is possible to place breakpoints
+    in kernel code and perform some limited execution stepping.
+    </para>
+    <para>
+    Two machines are required for using kgdb. One of these machines is
+    a development machine and the other is the target machine.  The
+    kernel to be debugged runs on the target machine. The development
+    machine runs an instance of gdb against the vmlinux file which
+    contains the symbols (not boot image such as bzImage, zImage,
+    uImage...).  In gdb the developer specifies the connection
+    parameters and connects to kgdb.  The type of connection a
+    developer makes with gdb depends on the availability of kgdb I/O
+    modules compiled as built-ins or loadable kernel modules in the test
+    machine's kernel.
+    </para>
+  </chapter>
+  <chapter id="CompilingAKernel">
+  <title>Compiling a kernel</title>
+  <para>
+  <itemizedlist>
+  <listitem><para>In order to enable compilation of kdb, you must first enable kgdb.</para></listitem>
+  <listitem><para>The kgdb test compile options are described in the kgdb test suite chapter.</para></listitem>
+  </itemizedlist>
+  </para>
+  <sect1 id="CompileKGDB">
+    <title>Kernel config options for kgdb</title>
+    <para>
+    To enable <symbol>CONFIG_KGDB</symbol> you should look under
+    "Kernel debugging" and select "KGDB: kernel debugger".
+    </para>
+    <para>
+    While it is not a hard requirement that you have symbols in your
+    vmlinux file, gdb tends not to be very useful without the symbolic
+    data, so you will want to turn
+    on <symbol>CONFIG_DEBUG_INFO</symbol> which is called "Compile the
+    kernel with debug info" in the config menu.
+    </para>
+    <para>
+    It is advised, but not required that you turn on the
+    <symbol>CONFIG_FRAME_POINTER</symbol> kernel option which is called "Compile the
+    kernel with frame pointers" in the config menu.  This option
+    inserts code to into the compiled executable which saves the frame
+    information in registers or on the stack at different points which
+    allows a debugger such as gdb to more accurately construct
+    stack back traces while debugging the kernel.
+    </para>
+    <para>
+    If the architecture that you are using supports the kernel option
+    CONFIG_DEBUG_RODATA, you should consider turning it off.  This
+    option will prevent the use of software breakpoints because it
+    marks certain regions of the kernel's memory space as read-only.
+    If kgdb supports it for the architecture you are using, you can
+    use hardware breakpoints if you desire to run with the
+    CONFIG_DEBUG_RODATA option turned on, else you need to turn off
+    this option.
+    </para>
+    <para>
+    Next you should choose one of more I/O drivers to interconnect
+    debugging host and debugged target.  Early boot debugging requires
+    a KGDB I/O driver that supports early debugging and the driver
+    must be built into the kernel directly. Kgdb I/O driver
+    configuration takes place via kernel or module parameters which
+    you can learn more about in the in the section that describes the
+    parameter "kgdboc".
+    </para>
+    <para>Here is an example set of .config symbols to enable or
+    disable for kgdb:
+    <itemizedlist>
+    <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+    <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
+    <listitem><para>CONFIG_KGDB=y</para></listitem>
+    <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
+    </itemizedlist>
+    </para>
+  </sect1>
+  <sect1 id="CompileKDB">
+    <title>Kernel config options for kdb</title>
+    <para>Kdb is quite a bit more complex than the simple gdbstub
+    sitting on top of the kernel's debug core.  Kdb must implement a
+    shell, and also adds some helper functions in other parts of the
+    kernel, responsible for printing out interesting data such as what
+    you would see if you ran "lsmod", or "ps".  In order to build kdb
+    into the kernel you follow the same steps as you would for kgdb.
+    </para>
+    <para>The main config option for kdb
+    is <symbol>CONFIG_KGDB_KDB</symbol> which is called "KGDB_KDB:
+    include kdb frontend for kgdb" in the config menu.  In theory you
+    would have already also selected an I/O driver such as the
+    CONFIG_KGDB_SERIAL_CONSOLE interface if you plan on using kdb on a
+    serial port, when you were configuring kgdb.
+    </para>
+    <para>If you want to use a PS/2-style keyboard with kdb, you would
+    select CONFIG_KDB_KEYBOARD which is called "KGDB_KDB: keyboard as
+    input device" in the config menu.  The CONFIG_KDB_KEYBOARD option
+    is not used for anything in the gdb interface to kgdb.  The
+    CONFIG_KDB_KEYBOARD option only works with kdb.
+    </para>
+    <para>Here is an example set of .config symbols to enable/disable kdb:
+    <itemizedlist>
+    <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+    <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
+    <listitem><para>CONFIG_KGDB=y</para></listitem>
+    <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
+    <listitem><para>CONFIG_KGDB_KDB=y</para></listitem>
+    <listitem><para>CONFIG_KDB_KEYBOARD=y</para></listitem>
+    </itemizedlist>
+    </para>
+  </sect1>
+  </chapter>
+  <chapter id="kgdbKernelArgs">
+  <title>Kernel Debugger Boot Arguments</title>
+  <para>This section describes the various runtime kernel
+  parameters that affect the configuration of the kernel debugger.
+  The following chapter covers using kdb and kgdb as well as
+  provides some examples of the configuration parameters.</para>
+   <sect1 id="kgdboc">
+   <title>Kernel parameter: kgdboc</title>
+   <para>The kgdboc driver was originally an abbreviation meant to
+   stand for "kgdb over console".  Today it is the primary mechanism
+   to configure how to communicate from gdb to kgdb as well as the
+   devices you want to use to interact with the kdb shell.
+   </para>
+   <para>For kgdb/gdb, kgdboc is designed to work with a single serial
+   port. It is intended to cover the circumstance where you want to
+   use a serial console as your primary console as well as using it to
+   perform kernel debugging.  It is also possible to use kgdb on a
+   serial port which is not designated as a system console.  Kgdboc
+   may be configured as a kernel built-in or a kernel loadable module.
+   You can only make use of <constant>kgdbwait</constant> and early
+   debugging if you build kgdboc into the kernel as a built-in.
+   <para>Optionally you can elect to activate kms (Kernel Mode
+   Setting) integration.  When you use kms with kgdboc and you have a
+   video driver that has atomic mode setting hooks, it is possible to
+   enter the debugger on the graphics console.  When the kernel
+   execution is resumed, the previous graphics mode will be restored.
+   This integration can serve as a useful tool to aid in diagnosing
+   crashes or doing analysis of memory with kdb while allowing the
+   full graphics console applications to run.
+   </para>
+   </para>
+   <sect2 id="kgdbocArgs">
+   <title>kgdboc arguments</title>
+   <para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
+   <para>The order listed above must be observed if you use any of the
+   optional configurations together.
+   </para>
+   <para>Abbreviations:
+   <itemizedlist>
+   <listitem><para>kms = Kernel Mode Setting</para></listitem>
+   <listitem><para>kbd = Keyboard</para></listitem>
+   </itemizedlist>
+   </para>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.  The order listed above must be observed if
+   you use any of the optional configurations together.  Using kms +
+   only gdb is generally not a useful combination.</para>
+   <sect3 id="kgdbocArgs1">
+   <title>Using loadable module or built-in</title>
+   <para>
+   <orderedlist>
+   <listitem><para>As a kernel built-in:</para>
+   <para>Use the kernel boot argument: <constant>kgdboc=&lt;tty-device&gt;,[baud]</constant></para></listitem>
+   <listitem>
+   <para>As a kernel loadable module:</para>
+   <para>Use the command: <constant>modprobe kgdboc kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
+   <para>Here are two examples of how you might format the kgdboc
+   string. The first is for an x86 target using the first serial port.
+   The second example is for the ARM Versatile AB using the second
+   serial port.
+   <orderedlist>
+   <listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
+   <listitem><para><constant>kgdboc=ttyAMA1,115200</constant></para></listitem>
+   </orderedlist>
+   </para>
+   </listitem>
+   </orderedlist></para>
+   </sect3>
+   <sect3 id="kgdbocArgs2">
+   <title>Configure kgdboc at runtime with sysfs</title>
+   <para>At run time you can enable or disable kgdboc by echoing a
+   parameters into the sysfs.  Here are two examples:</para>
+   <orderedlist>
+   <listitem><para>Enable kgdboc on ttyS0</para>
+   <para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+   <listitem><para>Disable kgdboc</para>
+   <para><constant>echo "" &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+   </orderedlist>
+   <para>NOTE: You do not need to specify the baud if you are
+   configuring the console on tty which is already configured or
+   open.</para>
+   </sect3>
+   <sect3 id="kgdbocArgs3">
+   <title>More examples</title>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.</para>
+   <para>You can configure kgdboc to use the keyboard, and or a serial device
+   depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.
+   <orderedlist>
+   <listitem><para>kdb and kgdb over only a serial port</para>
+   <para><constant>kgdboc=&lt;serial_device&gt;[,baud]</constant></para>
+   <para>Example: <constant>kgdboc=ttyS0,115200</constant></para>
+   </listitem>
+   <listitem><para>kdb and kgdb with keyboard and a serial port</para>
+   <para><constant>kgdboc=kbd,&lt;serial_device&gt;[,baud]</constant></para>
+   <para>Example: <constant>kgdboc=kbd,ttyS0,115200</constant></para>
+   </listitem>
+   <listitem><para>kdb with a keyboard</para>
+   <para><constant>kgdboc=kbd</constant></para>
+   </listitem>
+   <listitem><para>kdb with kernel mode setting</para>
+   <para><constant>kgdboc=kms,kbd</constant></para>
+   </listitem>
+   <listitem><para>kdb with kernel mode setting and kgdb over a serial port</para>
+   <para><constant>kgdboc=kms,kbd,ttyS0,115200</constant></para>
+   </listitem>
+   </orderedlist>
+   </para>
+   </sect3>
+   <para>NOTE: Kgdboc does not support interrupting the target via the
+   gdb remote protocol.  You must manually send a sysrq-g unless you
+   have a proxy that splits console output to a terminal program.
+   A console proxy has a separate TCP port for the debugger and a separate
+   TCP port for the "human" console.  The proxy can take care of sending
+   the sysrq-g for you.
+   </para>
+   <para>When using kgdboc with no debugger proxy, you can end up
+    connecting the debugger at one of two entry points.  If an
+    exception occurs after you have loaded kgdboc, a message should
+    print on the console stating it is waiting for the debugger.  In
+    this case you disconnect your terminal program and then connect the
+    debugger in its place.  If you want to interrupt the target system
+    and forcibly enter a debug session you have to issue a Sysrq
+    sequence and then type the letter <constant>g</constant>.  Then
+    you disconnect the terminal session and connect gdb.  Your options
+    if you don't like this are to hack gdb to send the sysrq-g for you
+    as well as on the initial connect, or to use a debugger proxy that
+    allows an unmodified gdb to do the debugging.
+   </para>
+   </sect2>
+   </sect1>
+   <sect1 id="kgdbwait">
+   <title>Kernel parameter: kgdbwait</title>
+   <para>
+   The Kernel command line option <constant>kgdbwait</constant> makes
+   kgdb wait for a debugger connection during booting of a kernel.  You
+   can only use this option you compiled a kgdb I/O driver into the
+   kernel and you specified the I/O driver configuration as a kernel
+   command line option.  The kgdbwait parameter should always follow the
+   configuration parameter for the kgdb I/O driver in the kernel
+   command line else the I/O driver will not be configured prior to
+   asking the kernel to use it to wait.
+   </para>
+   <para>
+   The kernel will stop and wait as early as the I/O driver and
+   architecture allows when you use this option.  If you build the
+   kgdb I/O driver as a loadable kernel module kgdbwait will not do
+   anything.
+   </para>
+   </sect1>
+   <sect1 id="kgdbcon">
+   <title>Kernel parameter: kgdbcon</title>
+   <para> The kgdbcon feature allows you to see printk() messages
+   inside gdb while gdb is connected to the kernel.  Kdb does not make
+    use of the kgdbcon feature.
+   </para>
+   <para>Kgdb supports using the gdb serial protocol to send console
+   messages to the debugger when the debugger is connected and running.
+   There are two ways to activate this feature.
+   <orderedlist>
+   <listitem><para>Activate with the kernel command line option:</para>
+   <para><constant>kgdbcon</constant></para>
+   </listitem>
+   <listitem><para>Use sysfs before configuring an I/O driver</para>
+   <para>
+   <constant>echo 1 &gt; /sys/module/kgdb/parameters/kgdb_use_con</constant>
+   </para>
+   <para>
+   NOTE: If you do this after you configure the kgdb I/O driver, the
+   setting will not take effect until the next point the I/O is
+   reconfigured.
+   </para>
+   </listitem>
+   </orderedlist>
+   <para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
+   active system console.  An example incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
+   </para>
+   <para>It is possible to use this option with kgdboc on a tty that is not a system console.
+   </para>
+  </para>
+  </sect1>
+   <sect1 id="kgdbreboot">
+   <title>Run time parameter: kgdbreboot</title>
+   <para> The kgdbreboot feature allows you to change how the debugger
+   deals with the reboot notification.  You have 3 choices for the
+   behavior.  The default behavior is always set to 0.</para>
+   <orderedlist>
+   <listitem><para>echo -1 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Ignore the reboot notification entirely.</para>
+   </listitem>
+   <listitem><para>echo 0 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Send the detach message to any attached debugger client.</para>
+   </listitem>
+   <listitem><para>echo 1 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Enter the debugger on reboot notify.</para>
+   </listitem>
+   </orderedlist>
+  </sect1>
+  </chapter>
+  <chapter id="usingKDB">
+  <title>Using kdb</title>
+  <para>
+  </para>
+  <sect1 id="quickKDBserial">
+  <title>Quick start for kdb on a serial port</title>
+  <para>This is a quick example of how to use kdb.</para>
+  <para><orderedlist>
+  <listitem><para>Boot kernel with arguments:
+  <itemizedlist>
+  <listitem><para><constant>console=ttyS0,115200 kgdboc=ttyS0,115200</constant></para></listitem>
+  </itemizedlist></para>
+  <para>OR</para>
+  <para>Configure kgdboc after the kernel booted; assuming you are using a serial port console:
+  <itemizedlist>
+  <listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+  </itemizedlist>
+  </para>
+  </listitem>
+  <listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault.  There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
+  <itemizedlist>
+  <listitem><para>When logged in as root or with a super user session you can run:</para>
+   <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+  <listitem><para>Example using minicom 2.2</para>
+  <para>Press: <constant>Control-a</constant></para>
+  <para>Press: <constant>f</constant></para>
+  <para>Press: <constant>g</constant></para>
+  </listitem>
+  <listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
+  <para>Press: <constant>Control-]</constant></para>
+  <para>Type in:<constant>send break</constant></para>
+  <para>Press: <constant>Enter</constant></para>
+  <para>Press: <constant>g</constant></para>
+  </listitem>
+  </itemizedlist>
+  </listitem>
+  <listitem><para>From the kdb prompt you can run the "help" command to see a complete list of the commands that are available.</para>
+  <para>Some useful commands in kdb include:
+  <itemizedlist>
+  <listitem><para>lsmod  -- Shows where kernel modules are loaded</para></listitem>
+  <listitem><para>ps -- Displays only the active processes</para></listitem>
+  <listitem><para>ps A -- Shows all the processes</para></listitem>
+  <listitem><para>summary -- Shows kernel version info and memory usage</para></listitem>
+  <listitem><para>bt -- Get a backtrace of the current process using dump_stack()</para></listitem>
+  <listitem><para>dmesg -- View the kernel syslog buffer</para></listitem>
+  <listitem><para>go -- Continue the system</para></listitem>
+  </itemizedlist>
+  </para>
+  </listitem>
+  <listitem>
+  <para>When you are done using kdb you need to consider rebooting the
+  system or using the "go" command to resuming normal kernel
+  execution.  If you have paused the kernel for a lengthy period of
+  time, applications that rely on timely networking or anything to do
+  with real wall clock time could be adversely affected, so you
+  should take this into consideration when using the kernel
+  debugger.</para>
+  </listitem>
+  </orderedlist></para>
+  </sect1>
+  <sect1 id="quickKDBkeyboard">
+  <title>Quick start for kdb using a keyboard connected console</title>
+  <para>This is a quick example of how to use kdb with a keyboard.</para>
+  <para><orderedlist>
+  <listitem><para>Boot kernel with arguments:
+  <itemizedlist>
+  <listitem><para><constant>kgdboc=kbd</constant></para></listitem>
+  </itemizedlist></para>
+  <para>OR</para>
+  <para>Configure kgdboc after the kernel booted:
+  <itemizedlist>
+  <listitem><para><constant>echo kbd &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+  </itemizedlist>
+  </para>
+  </listitem>
+  <listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault.  There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
+  <itemizedlist>
+  <listitem><para>When logged in as root or with a super user session you can run:</para>
+   <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+  <listitem><para>Example using a laptop keyboard</para>
+  <para>Press and hold down: <constant>Alt</constant></para>
+  <para>Press and hold down: <constant>Fn</constant></para>
+  <para>Press and release the key with the label: <constant>SysRq</constant></para>
+  <para>Release: <constant>Fn</constant></para>
+  <para>Press and release: <constant>g</constant></para>
+  <para>Release: <constant>Alt</constant></para>
+  </listitem>
+  <listitem><para>Example using a PS/2 101-key keyboard</para>
+  <para>Press and hold down: <constant>Alt</constant></para>
+  <para>Press and release the key with the label: <constant>SysRq</constant></para>
+  <para>Press and release: <constant>g</constant></para>
+  <para>Release: <constant>Alt</constant></para>
+  </listitem>
+  </itemizedlist>
+  </listitem>
+  <listitem>
+  <para>Now type in a kdb command such as "help", "dmesg", "bt" or "go" to continue kernel execution.</para>
+  </listitem>
+  </orderedlist></para>
+  </sect1>
+  </chapter>
+  <chapter id="EnableKGDB">
+   <title>Using kgdb / gdb</title>
+   <para>In order to use kgdb you must activate it by passing
+   configuration information to one of the kgdb I/O drivers.  If you
+   do not pass any configuration information kgdb will not do anything
+   at all.  Kgdb will only actively hook up to the kernel trap hooks
+   if a kgdb I/O driver is loaded and configured.  If you unconfigure
+   a kgdb I/O driver, kgdb will unregister all the kernel hook points.
+   </para>
+   <para> All kgdb I/O drivers can be reconfigured at run time, if
+   <symbol>CONFIG_SYSFS</symbol> and <symbol>CONFIG_MODULES</symbol>
+   are enabled, by echo'ing a new config string to
+   <constant>/sys/module/&lt;driver&gt;/parameter/&lt;option&gt;</constant>.
+   The driver can be unconfigured by passing an empty string.  You cannot
+   change the configuration while the debugger is attached.  Make sure
+   to detach the debugger with the <constant>detach</constant> command
+   prior to trying to unconfigure a kgdb I/O driver.
+   </para>
+  <sect1 id="ConnectingGDB">
+  <title>Connecting with gdb to a serial port</title>
+  <orderedlist>
+  <listitem><para>Configure kgdboc</para>
+   <para>Boot kernel with arguments:
+   <itemizedlist>
+    <listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
+   </itemizedlist></para>
+   <para>OR</para>
+   <para>Configure kgdboc after the kernel booted:
+   <itemizedlist>
+    <listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+   </itemizedlist></para>
+  </listitem>
+  <listitem>
+  <para>Stop kernel execution (break into the debugger)</para>
+  <para>In order to connect to gdb via kgdboc, the kernel must
+  first be stopped.  There are several ways to stop the kernel which
+  include using kgdbwait as a boot argument, via a sysrq-g, or running
+  the kernel until it takes an exception where it waits for the
+  debugger to attach.
+  <itemizedlist>
+  <listitem><para>When logged in as root or with a super user session you can run:</para>
+   <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+  <listitem><para>Example using minicom 2.2</para>
+  <para>Press: <constant>Control-a</constant></para>
+  <para>Press: <constant>f</constant></para>
+  <para>Press: <constant>g</constant></para>
+  </listitem>
+  <listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
+  <para>Press: <constant>Control-]</constant></para>
+  <para>Type in:<constant>send break</constant></para>
+  <para>Press: <constant>Enter</constant></para>
+  <para>Press: <constant>g</constant></para>
+  </listitem>
+  </itemizedlist>
+  </para>
+  </listitem>
+  <listitem>
+    <para>Connect from from gdb</para>
+    <para>
+    Example (using a directly connected port):
+    </para>
+    <programlisting>
+    % gdb ./vmlinux
+    (gdb) set remotebaud 115200
+    (gdb) target remote /dev/ttyS0
+    </programlisting>
+    <para>
+    Example (kgdb to a terminal server on TCP port 2012):
+    </para>
+    <programlisting>
+    % gdb ./vmlinux
+    (gdb) target remote 192.168.2.2:2012
+    </programlisting>
+    <para>
+    Once connected, you can debug a kernel the way you would debug an
+    application program.
+    </para>
+    <para>
+    If you are having problems connecting or something is going
+    seriously wrong while debugging, it will most often be the case
+    that you want to enable gdb to be verbose about its target
+    communications.  You do this prior to issuing the <constant>target
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
+    </para>
+  </listitem>
+  </orderedlist>
+  <para>Remember if you continue in gdb, and need to "break in" again,
+  you need to issue an other sysrq-g.  It is easy to create a simple
+  entry point by putting a breakpoint at <constant>sys_sync</constant>
+  and then you can run "sync" from a shell or script to break into the
+  debugger.</para>
+  </sect1>
+  </chapter>
+  <chapter id="switchKdbKgdb">
+  <title>kgdb and kdb interoperability</title>
+  <para>It is possible to transition between kdb and kgdb dynamically.
+  The debug core will remember which you used the last time and
+  automatically start in the same mode.</para>
+  <sect1>
+  <title>Switching between kdb and kgdb</title>
+  <sect2>
+  <title>Switching from kgdb to kdb</title>
+  <para>
+  There are two ways to switch from kgdb to kdb: you can use gdb to
+  issue a maintenance packet, or you can blindly type the command $3#33.
+  Whenever kernel debugger stops in kgdb mode it will print the
+  message <constant>KGDB or $3#33 for KDB</constant>.  It is important
+  to note that you have to type the sequence correctly in one pass.
+  You cannot type a backspace or delete because kgdb will interpret
+  that as part of the debug stream.
+  <orderedlist>
+  <listitem><para>Change from kgdb to kdb by blindly typing:</para>
+  <para><constant>$3#33</constant></para></listitem>
+  <listitem><para>Change from kgdb to kdb with gdb</para>
+  <para><constant>maintenance packet 3</constant></para>
+  <para>NOTE: Now you must kill gdb. Typically you press control-z and
+  issue the command: kill -9 %</para></listitem>
+  </orderedlist>
+  </para>
+  </sect2>
+  <sect2>
+  <title>Change from kdb to kgdb</title>
+  <para>There are two ways you can change from kdb to kgdb.  You can
+  manually enter kgdb mode by issuing the kgdb command from the kdb
+  shell prompt, or you can connect gdb while the kdb shell prompt is
+  active.  The kdb shell looks for the typical first commands that gdb
+  would issue with the gdb remote protocol and if it sees one of those
+  commands it automatically changes into kgdb mode.</para>
+  <orderedlist>
+  <listitem><para>From kdb issue the command:</para>
+  <para><constant>kgdb</constant></para>
+  <para>Now disconnect your terminal program and connect gdb in its place</para></listitem>
+  <listitem><para>At the kdb prompt, disconnect the terminal program and connect gdb in its place.</para></listitem>
+  </orderedlist>
+  </sect2>
+  </sect1>
+  <sect1>
+  <title>Running kdb commands from gdb</title>
+  <para>It is possible to run a limited set of kdb commands from gdb,
+  using the gdb monitor command.  You don't want to execute any of the
+  run control or breakpoint operations, because it can disrupt the
+  state of the kernel debugger.  You should be using gdb for
+  breakpoints and run control operations if you have gdb connected.
+  The more useful commands to run are things like lsmod, dmesg, ps or
+  possibly some of the memory information commands.  To see all the kdb
+  commands you can run <constant>monitor help</constant>.</para>
+  <para>Example:
+  <informalexample><programlisting>
+(gdb) monitor ps
+1 idle process (state I) and
+27 sleeping system daemon (state M) processes suppressed,
+use 'ps A' to see all.
+Task Addr       Pid   Parent [*] cpu State Thread     Command
+
+0xc78291d0        1        0  0    0   S  0xc7829404  init
+0xc7954150      942        1  0    0   S  0xc7954384  dropbear
+0xc78789c0      944        1  0    0   S  0xc7878bf4  sh
+(gdb)
+  </programlisting></informalexample>
+  </para>
+  </sect1>
+  </chapter>
+  <chapter id="KGDBTestSuite">
+    <title>kgdb Test Suite</title>
+    <para>
+    When kgdb is enabled in the kernel config you can also elect to
+    enable the config parameter KGDB_TESTS.  Turning this on will
+    enable a special kgdb I/O module which is designed to test the
+    kgdb internal functions.
+    </para>
+    <para>
+    The kgdb tests are mainly intended for developers to test the kgdb
+    internals as well as a tool for developing a new kgdb architecture
+    specific implementation.  These tests are not really for end users
+    of the Linux kernel.  The primary source of documentation would be
+    to look in the drivers/misc/kgdbts.c file.
+    </para>
+    <para>
+    The kgdb test suite can also be configured at compile time to run
+    the core set of tests by setting the kernel config parameter
+    KGDB_TESTS_ON_BOOT.  This particular option is aimed at automated
+    regression testing and does not require modifying the kernel boot
+    config arguments.  If this is turned on, the kgdb test suite can
+    be disabled by specifying "kgdbts=" as a kernel boot argument.
+    </para>
+  </chapter>
+  <chapter id="CommonBackEndReq">
+  <title>Kernel Debugger Internals</title>
+  <sect1 id="kgdbArchitecture">
+    <title>Architecture Specifics</title>
+      <para>
+      The kernel debugger is organized into a number of components:
+      <orderedlist>
+      <listitem><para>The debug core</para>
+      <para>
+      The debug core is found in kernel/debugger/debug_core.c.  It contains:
+      <itemizedlist>
+      <listitem><para>A generic OS exception handler which includes
+      sync'ing the processors into a stopped state on an multi-CPU
+      system.</para></listitem>
+      <listitem><para>The API to talk to the kgdb I/O drivers</para></listitem>
+      <listitem><para>The API to make calls to the arch-specific kgdb implementation</para></listitem>
+      <listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
+      <listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
+      <listitem><para>The API to invoke either the kdb or kgdb frontend to the debug core.</para></listitem>
+      <listitem><para>The structures and callback API for atomic kernel mode setting.</para>
+      <para>NOTE: kgdboc is where the kms callbacks are invoked.</para></listitem>
+      </itemizedlist>
+      </para>
+      </listitem>
+      <listitem><para>kgdb arch-specific implementation</para>
+      <para>
+      This implementation is generally found in arch/*/kernel/kgdb.c.
+      As an example, arch/x86/kernel/kgdb.c contains the specifics to
+      implement HW breakpoint as well as the initialization to
+      dynamically register and unregister for the trap handlers on
+      this architecture.  The arch-specific portion implements:
+      <itemizedlist>
+      <listitem><para>contains an arch-specific trap catcher which
+      invokes kgdb_handle_exception() to start kgdb about doing its
+      work</para></listitem>
+      <listitem><para>translation to and from gdb specific packet format to pt_regs</para></listitem>
+      <listitem><para>Registration and unregistration of architecture specific trap hooks</para></listitem>
+      <listitem><para>Any special exception handling and cleanup</para></listitem>
+      <listitem><para>NMI exception handling and cleanup</para></listitem>
+      <listitem><para>(optional)HW breakpoints</para></listitem>
+      </itemizedlist>
+      </para>
+      </listitem>
+      <listitem><para>gdbstub frontend (aka kgdb)</para>
+      <para>The gdbstub is located in kernel/debug/gdbstub.c. It contains:</para>
+      <itemizedlist>
+        <listitem><para>All the logic to implement the gdb serial protocol</para></listitem>
+      </itemizedlist>
+      </listitem>
+      <listitem><para>kdb frontend</para>
+      <para>The kdb debugger shell is broken down into a number of
+      components.  The kdb core is located in kernel/debug/kdb.  There
+      are a number of helper functions in some of the other kernel
+      components to make it possible for kdb to examine and report
+      information about the kernel without taking locks that could
+      cause a kernel deadlock.  The kdb core contains implements the following functionality.</para>
+      <itemizedlist>
+        <listitem><para>A simple shell</para></listitem>
+        <listitem><para>The kdb core command set</para></listitem>
+        <listitem><para>A registration API to register additional kdb shell commands.</para>
+	<itemizedlist>
+        <listitem><para>A good example of a self-contained kdb module
+        is the "ftdump" command for dumping the ftrace buffer.  See:
+        kernel/trace/trace_kdb.c</para></listitem>
+        <listitem><para>For an example of how to dynamically register
+        a new kdb command you can build the kdb_hello.ko kernel module
+        from samples/kdb/kdb_hello.c.  To build this example you can
+        set CONFIG_SAMPLES=y and CONFIG_SAMPLE_KDB=m in your kernel
+        config.  Later run "modprobe kdb_hello" and the next time you
+        enter the kdb shell, you can run the "hello"
+        command.</para></listitem>
+	</itemizedlist></listitem>
+        <listitem><para>The implementation for kdb_printf() which
+        emits messages directly to I/O drivers, bypassing the kernel
+        log.</para></listitem>
+        <listitem><para>SW / HW breakpoint management for the kdb shell</para></listitem>
+      </itemizedlist>
+      </listitem>
+      <listitem><para>kgdb I/O driver</para>
+      <para>
+      Each kgdb I/O driver has to provide an implementation for the following:
+      <itemizedlist>
+      <listitem><para>configuration via built-in or module</para></listitem>
+      <listitem><para>dynamic configuration and kgdb hook registration calls</para></listitem>
+      <listitem><para>read and write character interface</para></listitem>
+      <listitem><para>A cleanup handler for unconfiguring from the kgdb core</para></listitem>
+      <listitem><para>(optional) Early debug methodology</para></listitem>
+      </itemizedlist>
+      Any given kgdb I/O driver has to operate very closely with the
+      hardware and must do it in such a way that does not enable
+      interrupts or change other parts of the system context without
+      completely restoring them. The kgdb core will repeatedly "poll"
+      a kgdb I/O driver for characters when it needs input.  The I/O
+      driver is expected to return immediately if there is no data
+      available.  Doing so allows for the future possibility to touch
+      watch dog hardware in such a way as to have a target system not
+      reset when these are enabled.
+      </para>
+      </listitem>
+      </orderedlist>
+      </para>
+      <para>
+      If you are intent on adding kgdb architecture specific support
+      for a new architecture, the architecture should define
+      <constant>HAVE_ARCH_KGDB</constant> in the architecture specific
+      Kconfig file.  This will enable kgdb for the architecture, and
+      at that point you must create an architecture specific kgdb
+      implementation.
+      </para>
+      <para>
+      There are a few flags which must be set on every architecture in
+      their &lt;asm/kgdb.h&gt; file.  These are:
+      <itemizedlist>
+        <listitem>
+	  <para>
+	  NUMREGBYTES: The size in bytes of all of the registers, so
+	  that we can ensure they will all fit into a packet.
+	  </para>
+	  <para>
+	  BUFMAX: The size in bytes of the buffer GDB will read into.
+	  This must be larger than NUMREGBYTES.
+	  </para>
+	  <para>
+	  CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
+	  flush_cache_range or flush_icache_range.  On some architectures,
+	  these functions may not be safe to call on SMP since we keep other
+	  CPUs in a holding pattern.
+	  </para>
+	</listitem>
+      </itemizedlist>
+      </para>
+      <para>
+      There are also the following functions for the common backend,
+      found in kernel/kgdb.c, that must be supplied by the
+      architecture-specific backend unless marked as (optional), in
+      which case a default function maybe used if the architecture
+      does not need to provide a specific implementation.
+      </para>
+!Iinclude/linux/kgdb.h
+  </sect1>
+  <sect1 id="kgdbocDesign">
+  <title>kgdboc internals</title>
+  <sect2>
+  <title>kgdboc and uarts</title>
+  <para>
+  The kgdboc driver is actually a very thin driver that relies on the
+  underlying low level to the hardware driver having "polling hooks"
+  which the to which the tty driver is attached.  In the initial
+  implementation of kgdboc it the serial_core was changed to expose a
+  low level UART hook for doing polled mode reading and writing of a
+  single character while in an atomic context.  When kgdb makes an I/O
+  request to the debugger, kgdboc invokes a callback in the serial
+  core which in turn uses the callback in the UART driver.</para>
+  <para>
+  When using kgdboc with a UART, the UART driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = serial8250_get_poll_char,
+	.poll_put_char = serial8250_put_poll_char,
+#endif
+  </programlisting>
+  Any implementation specifics around creating a polling driver use the
+  <constant>#ifdef CONFIG_CONSOLE_POLL</constant>, as shown above.
+  Keep in mind that polling hooks have to be implemented in such a way
+  that they can be called from an atomic context and have to restore
+  the state of the UART chip on return such that the system can return
+  to normal when the debugger detaches.  You need to be very careful
+  with any kind of lock you consider, because failing here is most likely
+  going to mean pressing the reset button.
+  </para>
+  </sect2>
+  <sect2 id="kgdbocKbd">
+  <title>kgdboc and keyboards</title>
+  <para>The kgdboc driver contains logic to configure communications
+  with an attached keyboard.  The keyboard infrastructure is only
+  compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the
+  kernel configuration.</para>
+  <para>The core polled keyboard driver driver for PS/2 type keyboards
+  is in drivers/char/kdb_keyboard.c.  This driver is hooked into the
+  debug core when kgdboc populates the callback in the array
+  called <constant>kdb_poll_funcs[]</constant>.  The
+  kdb_get_kbd_char() is the top-level function which polls hardware
+  for single character input.
+  </para>
+  </sect2>
+  <sect2 id="kgdbocKms">
+  <title>kgdboc and kms</title>
+  <para>The kgdboc driver contains logic to request the graphics
+  display to switch to a text context when you are using
+  "kgdboc=kms,kbd", provided that you have a video driver which has a
+  frame buffer console and atomic kernel mode setting support.</para>
+  <para>
+  Every time the kernel
+  debugger is entered it calls kgdboc_pre_exp_handler() which in turn
+  calls con_debug_enter() in the virtual console layer.  On resuming kernel
+  execution, the kernel debugger calls kgdboc_post_exp_handler() which
+  in turn calls con_debug_leave().</para>
+  <para>Any video driver that wants to be compatible with the kernel
+  debugger and the atomic kms callbacks must implement the
+  mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations.
+  For the fb_debug_enter and fb_debug_leave the option exists to use
+  the generic drm fb helper functions or implement something custom for
+  the hardware.  The following example shows the initialization of the
+  .mode_set_base_atomic operation in
+  drivers/gpu/drm/i915/intel_display.c:
+  <informalexample>
+  <programlisting>
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+[...]
+        .mode_set_base_atomic = intel_pipe_set_base_atomic,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  <para>Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in
+  drivers/gpu/drm/i915/intel_fb.c:
+  <informalexample>
+  <programlisting>
+static struct fb_ops intelfb_ops = {
+[...]
+       .fb_debug_enter = drm_fb_helper_debug_enter,
+       .fb_debug_leave = drm_fb_helper_debug_leave,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  </sect2>
+  </sect1>
+  </chapter>
+  <chapter id="credits">
+     <title>Credits</title>
+	<para>
+		The following people have contributed to this document:
+		<orderedlist>
+			<listitem><para>Amit Kale<email>amitkale@linsyssoft.com</email></para></listitem>
+			<listitem><para>Tom Rini<email>trini@kernel.crashing.org</email></para></listitem>
+		</orderedlist>
+                In March 2008 this document was completely rewritten by:
+		<itemizedlist>
+		<listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
+		</itemizedlist>
+                In Jan 2010 this document was updated to include kdb.
+		<itemizedlist>
+		<listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
+		</itemizedlist>
+	</para>
+  </chapter>
+</book>
+

linux-imx/Documentation/DocBook/libata.tmpl

diff --git a/linux-imx/Documentation/DocBook/libata.tmpl b/linux-imx/Documentation/DocBook/libata.tmpl
new file mode 100644
index 0000000..deb71ba
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/libata.tmpl
@@ -0,0 +1,1625 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="libataDevGuide">
+ <bookinfo>
+  <title>libATA Developer's Guide</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Jeff</firstname>
+    <surname>Garzik</surname>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2003-2006</year>
+   <holder>Jeff Garzik</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+   The contents of this file are subject to the Open
+   Software License version 1.1 that can be found at
+   <ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink>
+   and is included herein by reference.
+   </para>
+
+   <para>
+   Alternatively, the contents of this file may be used under the terms
+   of the GNU General Public License version 2 (the "GPL") as distributed
+   in the kernel source COPYING file, in which case the provisions of
+   the GPL are applicable instead of the above.  If you wish to allow
+   the use of your version of this file only under the terms of the
+   GPL and not to allow others to use your version of this file under
+   the OSL, indicate your decision by deleting the provisions above and
+   replace them with the notice and other provisions required by the GPL.
+   If you do not delete the provisions above, a recipient may use your
+   version of this file under either the OSL or the GPL.
+   </para>
+
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="libataIntroduction">
+     <title>Introduction</title>
+  <para>
+  libATA is a library used inside the Linux kernel to support ATA host
+  controllers and devices.  libATA provides an ATA driver API, class
+  transports for ATA and ATAPI devices, and SCSI&lt;-&gt;ATA translation
+  for ATA devices according to the T10 SAT specification.
+  </para>
+  <para>
+  This Guide documents the libATA driver API, library functions, library
+  internals, and a couple sample ATA low-level drivers.
+  </para>
+  </chapter>
+
+  <chapter id="libataDriverApi">
+     <title>libata Driver API</title>
+     <para>
+     struct ata_port_operations is defined for every low-level libata
+     hardware driver, and it controls how the low-level driver
+     interfaces with the ATA and SCSI layers.
+     </para>
+     <para>
+     FIS-based drivers will hook into the system with ->qc_prep() and
+     ->qc_issue() high-level hooks.  Hardware which behaves in a manner
+     similar to PCI IDE hardware may utilize several generic helpers,
+     defining at a bare minimum the bus I/O addresses of the ATA shadow
+     register blocks.
+     </para>
+     <sect1>
+        <title>struct ata_port_operations</title>
+
+	<sect2><title>Disable ATA port</title>
+	<programlisting>
+void (*port_disable) (struct ata_port *);
+	</programlisting>
+
+	<para>
+	Called from ata_bus_probe() error path, as well as when
+	unregistering from the SCSI module (rmmod, hot unplug).
+	This function should do whatever needs to be done to take the
+	port out of use.  In most cases, ata_port_disable() can be used
+	as this hook.
+	</para>
+	<para>
+	Called from ata_bus_probe() on a failed probe.
+	Called from ata_scsi_release().
+	</para>
+
+	</sect2>
+
+	<sect2><title>Post-IDENTIFY device configuration</title>
+	<programlisting>
+void (*dev_config) (struct ata_port *, struct ata_device *);
+	</programlisting>
+
+	<para>
+	Called after IDENTIFY [PACKET] DEVICE is issued to each device
+	found.  Typically used to apply device-specific fixups prior to
+	issue of SET FEATURES - XFER MODE, and prior to operation.
+	</para>
+	<para>
+	This entry may be specified as NULL in ata_port_operations.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Set PIO/DMA mode</title>
+	<programlisting>
+void (*set_piomode) (struct ata_port *, struct ata_device *);
+void (*set_dmamode) (struct ata_port *, struct ata_device *);
+void (*post_set_mode) (struct ata_port *);
+unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
+	</programlisting>
+
+	<para>
+	Hooks called prior to the issue of SET FEATURES - XFER MODE
+	command.  The optional ->mode_filter() hook is called when libata
+	has built a mask of the possible modes. This is passed to the 
+	->mode_filter() function which should return a mask of valid modes
+	after filtering those unsuitable due to hardware limits. It is not
+	valid to use this interface to add modes.
+	</para>
+	<para>
+	dev->pio_mode and dev->dma_mode are guaranteed to be valid when
+	->set_piomode() and when ->set_dmamode() is called. The timings for
+	any other drive sharing the cable will also be valid at this point.
+	That is the library records the decisions for the modes of each
+	drive on a channel before it attempts to set any of them.
+	</para>
+	<para>
+	->post_set_mode() is
+	called unconditionally, after the SET FEATURES - XFER MODE
+	command completes successfully.
+	</para>
+
+	<para>
+	->set_piomode() is always called (if present), but
+	->set_dma_mode() is only called if DMA is possible.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Taskfile read/write</title>
+	<programlisting>
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+	</programlisting>
+
+	<para>
+	->tf_load() is called to load the given taskfile into hardware
+	registers / DMA buffers.  ->tf_read() is called to read the
+	hardware registers / DMA buffers, to obtain the current set of
+	taskfile register values.
+	Most drivers for taskfile-based hardware (PIO or MMIO) use
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
+	</para>
+
+	</sect2>
+
+	<sect2><title>PIO data read/write</title>
+	<programlisting>
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+	</programlisting>
+
+	<para>
+All bmdma-style drivers must implement this hook.  This is the low-level
+operation that actually copies the data bytes during a PIO data
+transfer.
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
+	</para>
+
+	</sect2>
+
+	<sect2><title>ATA command execute</title>
+	<programlisting>
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+	</programlisting>
+
+	<para>
+	causes an ATA command, previously loaded with
+	->tf_load(), to be initiated in hardware.
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
+	for this hook.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
+	<programlisting>
+int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+	</programlisting>
+
+	<para>
+Allow low-level driver to filter ATA PACKET commands, returning a status
+indicating whether or not it is OK to use DMA for the supplied PACKET
+command.
+	</para>
+	<para>
+	This hook may be specified as NULL, in which case libata will
+	assume that atapi dma can be supported.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Read specific ATA shadow registers</title>
+	<programlisting>
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
+	</programlisting>
+
+	<para>
+	Reads the Status/AltStatus ATA shadow register from
+	hardware.  On some hardware, reading the Status register has
+	the side effect of clearing the interrupt condition.
+	Most drivers for taskfile-based hardware use
+	ata_sff_check_status() for this hook.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Write specific ATA shadow register</title>
+	<programlisting>
+void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
+	</programlisting>
+
+	<para>
+	Write the device control ATA shadow register to the hardware.
+	Most drivers don't need to define this.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Select ATA device on bus</title>
+	<programlisting>
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+	</programlisting>
+
+	<para>
+	Issues the low-level hardware command(s) that causes one of N
+	hardware devices to be considered 'selected' (active and
+	available for use) on the ATA bus.  This generally has no
+	meaning on FIS-based devices.
+	</para>
+	<para>
+	Most drivers for taskfile-based hardware use
+	ata_sff_dev_select() for this hook.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Private tuning method</title>
+	<programlisting>
+void (*set_mode) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+	By default libata performs drive and controller tuning in
+	accordance with the ATA timing rules and also applies blacklists
+	and cable limits. Some controllers need special handling and have
+	custom tuning rules, typically raid controllers that use ATA
+	commands but do not actually do drive timing.
+	</para>
+
+	<warning>
+	<para>
+	This hook should not be used to replace the standard controller
+	tuning logic when a controller has quirks. Replacing the default
+	tuning logic in that case would bypass handling for drive and
+	bridge quirks that may be important to data reliability. If a
+	controller needs to filter the mode selection it should use the
+	mode_filter hook instead.
+	</para>
+	</warning>
+
+	</sect2>
+
+	<sect2><title>Control PCI IDE BMDMA engine</title>
+	<programlisting>
+void (*bmdma_setup) (struct ata_queued_cmd *qc);
+void (*bmdma_start) (struct ata_queued_cmd *qc);
+void (*bmdma_stop) (struct ata_port *ap);
+u8   (*bmdma_status) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+When setting up an IDE BMDMA transaction, these hooks arm
+(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
+the hardware's DMA engine.  ->bmdma_status is used to read the standard
+PCI IDE DMA Status register.
+	</para>
+
+	<para>
+These hooks are typically either no-ops, or simply not implemented, in
+FIS-based drivers.
+	</para>
+	<para>
+Most legacy IDE drivers use ata_bmdma_setup() for the bmdma_setup()
+hook.  ata_bmdma_setup() will write the pointer to the PRD table to
+the IDE PRD Table Address register, enable DMA in the DMA Command
+register, and call exec_command() to begin the transfer.
+	</para>
+	<para>
+Most legacy IDE drivers use ata_bmdma_start() for the bmdma_start()
+hook.  ata_bmdma_start() will write the ATA_DMA_START flag to the DMA
+Command register.
+	</para>
+	<para>
+Many legacy IDE drivers use ata_bmdma_stop() for the bmdma_stop()
+hook.  ata_bmdma_stop() clears the ATA_DMA_START flag in the DMA
+command register.
+	</para>
+	<para>
+Many legacy IDE drivers use ata_bmdma_status() as the bmdma_status() hook.
+	</para>
+
+	</sect2>
+
+	<sect2><title>High-level taskfile hooks</title>
+	<programlisting>
+void (*qc_prep) (struct ata_queued_cmd *qc);
+int (*qc_issue) (struct ata_queued_cmd *qc);
+	</programlisting>
+
+	<para>
+	Higher-level hooks, these two hooks can potentially supercede
+	several of the above taskfile/DMA engine hooks.  ->qc_prep is
+	called after the buffers have been DMA-mapped, and is typically
+	used to populate the hardware's DMA scatter-gather table.
+	Most drivers use the standard ata_qc_prep() helper function, but
+	more advanced drivers roll their own.
+	</para>
+	<para>
+	->qc_issue is used to make a command active, once the hardware
+	and S/G tables have been prepared.  IDE BMDMA drivers use the
+	helper function ata_qc_issue_prot() for taskfile protocol-based
+	dispatch.  More advanced drivers implement their own ->qc_issue.
+	</para>
+	<para>
+	ata_qc_issue_prot() calls ->tf_load(), ->bmdma_setup(), and
+	->bmdma_start() as necessary to initiate a transfer.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Exception and probe handling (EH)</title>
+	<programlisting>
+void (*eng_timeout) (struct ata_port *ap);
+void (*phy_reset) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+Deprecated.  Use ->error_handler() instead.
+	</para>
+
+	<programlisting>
+void (*freeze) (struct ata_port *ap);
+void (*thaw) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+ata_port_freeze() is called when HSM violations or some other
+condition disrupts normal operation of the port.  A frozen port
+is not allowed to perform any operation until the port is
+thawed, which usually follows a successful reset.
+	</para>
+
+	<para>
+The optional ->freeze() callback can be used for freezing the port
+hardware-wise (e.g. mask interrupt and stop DMA engine).  If a
+port cannot be frozen hardware-wise, the interrupt handler
+must ack and clear interrupts unconditionally while the port
+is frozen.
+	</para>
+	<para>
+The optional ->thaw() callback is called to perform the opposite of ->freeze():
+prepare the port for normal operation once again.  Unmask interrupts,
+start DMA engine, etc.
+	</para>
+
+	<programlisting>
+void (*error_handler) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+->error_handler() is a driver's hook into probe, hotplug, and recovery
+and other exceptional conditions.  The primary responsibility of an
+implementation is to call ata_do_eh() or ata_bmdma_drive_eh() with a set
+of EH hooks as arguments:
+	</para>
+
+	<para>
+'prereset' hook (may be NULL) is called during an EH reset, before any other actions
+are taken.
+	</para>
+
+	<para>
+'postreset' hook (may be NULL) is called after the EH reset is performed.  Based on
+existing conditions, severity of the problem, and hardware capabilities,
+	</para>
+
+	<para>
+Either 'softreset' (may be NULL) or 'hardreset' (may be NULL) will be
+called to perform the low-level EH reset.
+	</para>
+
+	<programlisting>
+void (*post_internal_cmd) (struct ata_queued_cmd *qc);
+	</programlisting>
+
+	<para>
+Perform any hardware-specific actions necessary to finish processing
+after executing a probe-time or EH-time command via ata_exec_internal().
+	</para>
+
+	</sect2>
+
+	<sect2><title>Hardware interrupt handling</title>
+	<programlisting>
+irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
+void (*irq_clear) (struct ata_port *);
+	</programlisting>
+
+	<para>
+	->irq_handler is the interrupt handling routine registered with
+	the system, by libata.  ->irq_clear is called during probe just
+	before the interrupt handler is registered, to be sure hardware
+	is quiet.
+	</para>
+	<para>
+	The second argument, dev_instance, should be cast to a pointer
+	to struct ata_host_set.
+	</para>
+	<para>
+	Most legacy IDE drivers use ata_sff_interrupt() for the
+	irq_handler hook, which scans all ports in the host_set,
+	determines which queued command was active (if any), and calls
+	ata_sff_host_intr(ap,qc).
+	</para>
+	<para>
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
+	irq_clear() hook, which simply clears the interrupt and error
+	flags in the DMA status register.
+	</para>
+
+	</sect2>
+
+	<sect2><title>SATA phy read/write</title>
+	<programlisting>
+int (*scr_read) (struct ata_port *ap, unsigned int sc_reg,
+		 u32 *val);
+int (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
+                   u32 val);
+	</programlisting>
+
+	<para>
+	Read and write standard SATA phy registers.  Currently only used
+	if ->phy_reset hook called the sata_phy_reset() helper function.
+	sc_reg is one of SCR_STATUS, SCR_CONTROL, SCR_ERROR, or SCR_ACTIVE.
+	</para>
+
+	</sect2>
+
+	<sect2><title>Init and shutdown</title>
+	<programlisting>
+int (*port_start) (struct ata_port *ap);
+void (*port_stop) (struct ata_port *ap);
+void (*host_stop) (struct ata_host_set *host_set);
+	</programlisting>
+
+	<para>
+	->port_start() is called just after the data structures for each
+	port are initialized.  Typically this is used to alloc per-port
+	DMA buffers / tables / rings, enable DMA engines, and similar
+	tasks.  Some drivers also use this entry point as a chance to
+	allocate driver-private memory for ap->private_data.
+	</para>
+	<para>
+	Many drivers use ata_port_start() as this hook or call
+	it from their own port_start() hooks.  ata_port_start()
+	allocates space for a legacy IDE PRD table and returns.
+	</para>
+	<para>
+	->port_stop() is called after ->host_stop().  Its sole function
+	is to release DMA/memory resources, now that they are no longer
+	actively being used.  Many drivers also free driver-private
+	data from port at this time.
+	</para>
+	<para>
+	->host_stop() is called after all ->port_stop() calls
+have completed.  The hook must finalize hardware shutdown, release DMA
+and other resources, etc.
+	This hook may be specified as NULL, in which case it is not called.
+	</para>
+
+	</sect2>
+
+     </sect1>
+  </chapter>
+
+  <chapter id="libataEH">
+        <title>Error handling</title>
+
+	<para>
+	This chapter describes how errors are handled under libata.
+	Readers are advised to read SCSI EH
+	(Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first.
+	</para>
+
+	<sect1><title>Origins of commands</title>
+	<para>
+	In libata, a command is represented with struct ata_queued_cmd
+	or qc.  qc's are preallocated during port initialization and
+	repetitively used for command executions.  Currently only one
+	qc is allocated per port but yet-to-be-merged NCQ branch
+	allocates one for each tag and maps each qc to NCQ tag 1-to-1.
+	</para>
+	<para>
+	libata commands can originate from two sources - libata itself
+	and SCSI midlayer.  libata internal commands are used for
+	initialization and error handling.  All normal blk requests
+	and commands for SCSI emulation are passed as SCSI commands
+	through queuecommand callback of SCSI host template.
+	</para>
+	</sect1>
+
+	<sect1><title>How commands are issued</title>
+
+	<variablelist>
+
+	<varlistentry><term>Internal commands</term>
+	<listitem>
+	<para>
+	First, qc is allocated and initialized using
+	ata_qc_new_init().  Although ata_qc_new_init() doesn't
+	implement any wait or retry mechanism when qc is not
+	available, internal commands are currently issued only during
+	initialization and error recovery, so no other command is
+	active and allocation is guaranteed to succeed.
+	</para>
+	<para>
+	Once allocated qc's taskfile is initialized for the command to
+	be executed.  qc currently has two mechanisms to notify
+	completion.  One is via qc->complete_fn() callback and the
+	other is completion qc->waiting.  qc->complete_fn() callback
+	is the asynchronous path used by normal SCSI translated
+	commands and qc->waiting is the synchronous (issuer sleeps in
+	process context) path used by internal commands.
+	</para>
+	<para>
+	Once initialization is complete, host_set lock is acquired
+	and the qc is issued.
+	</para>
+	</listitem>
+	</varlistentry>
+
+	<varlistentry><term>SCSI commands</term>
+	<listitem>
+	<para>
+	All libata drivers use ata_scsi_queuecmd() as
+	hostt->queuecommand callback.  scmds can either be simulated
+	or translated.  No qc is involved in processing a simulated
+	scmd.  The result is computed right away and the scmd is
+	completed.
+	</para>
+	<para>
+	For a translated scmd, ata_qc_new_init() is invoked to
+	allocate a qc and the scmd is translated into the qc.  SCSI
+	midlayer's completion notification function pointer is stored
+	into qc->scsidone.
+	</para>
+	<para>
+	qc->complete_fn() callback is used for completion
+	notification.  ATA commands use ata_scsi_qc_complete() while
+	ATAPI commands use atapi_qc_complete().  Both functions end up
+	calling qc->scsidone to notify upper layer when the qc is
+	finished.  After translation is completed, the qc is issued
+	with ata_qc_issue().
+	</para>
+	<para>
+	Note that SCSI midlayer invokes hostt->queuecommand while
+	holding host_set lock, so all above occur while holding
+	host_set lock.
+	</para>
+	</listitem>
+	</varlistentry>
+
+	</variablelist>
+	</sect1>
+
+	<sect1><title>How commands are processed</title>
+	<para>
+	Depending on which protocol and which controller are used,
+	commands are processed differently.  For the purpose of
+	discussion, a controller which uses taskfile interface and all
+	standard callbacks is assumed.
+	</para>
+	<para>
+	Currently 6 ATA command protocols are used.  They can be
+	sorted into the following four categories according to how
+	they are processed.
+	</para>
+
+	<variablelist>
+	   <varlistentry><term>ATA NO DATA or DMA</term>
+	   <listitem>
+	   <para>
+	   ATA_PROT_NODATA and ATA_PROT_DMA fall into this category.
+	   These types of commands don't require any software
+	   intervention once issued.  Device will raise interrupt on
+	   completion.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>ATA PIO</term>
+	   <listitem>
+	   <para>
+	   ATA_PROT_PIO is in this category.  libata currently
+	   implements PIO with polling.  ATA_NIEN bit is set to turn
+	   off interrupt and pio_task on ata_wq performs polling and
+	   IO.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>ATAPI NODATA or DMA</term>
+	   <listitem>
+	   <para>
+	   ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this
+	   category.  packet_task is used to poll BSY bit after
+	   issuing PACKET command.  Once BSY is turned off by the
+	   device, packet_task transfers CDB and hands off processing
+	   to interrupt handler.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>ATAPI PIO</term>
+	   <listitem>
+	   <para>
+	   ATA_PROT_ATAPI is in this category.  ATA_NIEN bit is set
+	   and, as in ATAPI NODATA or DMA, packet_task submits cdb.
+	   However, after submitting cdb, further processing (data
+	   transfer) is handed off to pio_task.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+	</variablelist>
+        </sect1>
+
+	<sect1><title>How commands are completed</title>
+	<para>
+	Once issued, all qc's are either completed with
+	ata_qc_complete() or time out.  For commands which are handled
+	by interrupts, ata_host_intr() invokes ata_qc_complete(), and,
+	for PIO tasks, pio_task invokes ata_qc_complete().  In error
+	cases, packet_task may also complete commands.
+	</para>
+	<para>
+	ata_qc_complete() does the following.
+	</para>
+
+	<orderedlist>
+
+	<listitem>
+	<para>
+	DMA memory is unmapped.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	ATA_QCFLAG_ACTIVE is clared from qc->flags.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	qc->complete_fn() callback is invoked.  If the return value of
+	the callback is not zero.  Completion is short circuited and
+	ata_qc_complete() returns.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	__ata_qc_complete() is called, which does
+	   <orderedlist>
+
+	   <listitem>
+	   <para>
+	   qc->flags is cleared to zero.
+	   </para>
+	   </listitem>
+
+	   <listitem>
+	   <para>
+	   ap->active_tag and qc->tag are poisoned.
+	   </para>
+	   </listitem>
+
+	   <listitem>
+	   <para>
+	   qc->waiting is claread &amp; completed (in that order).
+	   </para>
+	   </listitem>
+
+	   <listitem>
+	   <para>
+	   qc is deallocated by clearing appropriate bit in ap->qactive.
+	   </para>
+	   </listitem>
+
+	   </orderedlist>
+	</para>
+	</listitem>
+
+	</orderedlist>
+
+	<para>
+	So, it basically notifies upper layer and deallocates qc.  One
+	exception is short-circuit path in #3 which is used by
+	atapi_qc_complete().
+	</para>
+	<para>
+	For all non-ATAPI commands, whether it fails or not, almost
+	the same code path is taken and very little error handling
+	takes place.  A qc is completed with success status if it
+	succeeded, with failed status otherwise.
+	</para>
+	<para>
+	However, failed ATAPI commands require more handling as
+	REQUEST SENSE is needed to acquire sense data.  If an ATAPI
+	command fails, ata_qc_complete() is invoked with error status,
+	which in turn invokes atapi_qc_complete() via
+	qc->complete_fn() callback.
+	</para>
+	<para>
+	This makes atapi_qc_complete() set scmd->result to
+	SAM_STAT_CHECK_CONDITION, complete the scmd and return 1.  As
+	the sense data is empty but scmd->result is CHECK CONDITION,
+	SCSI midlayer will invoke EH for the scmd, and returning 1
+	makes ata_qc_complete() to return without deallocating the qc.
+	This leads us to ata_scsi_error() with partially completed qc.
+	</para>
+
+	</sect1>
+
+	<sect1><title>ata_scsi_error()</title>
+	<para>
+	ata_scsi_error() is the current transportt->eh_strategy_handler()
+	for libata.  As discussed above, this will be entered in two
+	cases - timeout and ATAPI error completion.  This function
+	calls low level libata driver's eng_timeout() callback, the
+	standard callback for which is ata_eng_timeout().  It checks
+	if a qc is active and calls ata_qc_timeout() on the qc if so.
+	Actual error handling occurs in ata_qc_timeout().
+	</para>
+	<para>
+	If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
+	completes the qc.  Note that as we're currently in EH, we
+	cannot call scsi_done.  As described in SCSI EH doc, a
+	recovered scmd should be either retried with
+	scsi_queue_insert() or finished with scsi_finish_command().
+	Here, we override qc->scsidone with scsi_finish_command() and
+	calls ata_qc_complete().
+	</para>
+	<para>
+	If EH is invoked due to a failed ATAPI qc, the qc here is
+	completed but not deallocated.  The purpose of this
+	half-completion is to use the qc as place holder to make EH
+	code reach this place.  This is a bit hackish, but it works.
+	</para>
+	<para>
+	Once control reaches here, the qc is deallocated by invoking
+	__ata_qc_complete() explicitly.  Then, internal qc for REQUEST
+	SENSE is issued.  Once sense data is acquired, scmd is
+	finished by directly invoking scsi_finish_command() on the
+	scmd.  Note that as we already have completed and deallocated
+	the qc which was associated with the scmd, we don't need
+	to/cannot call ata_qc_complete() again.
+	</para>
+
+	</sect1>
+
+	<sect1><title>Problems with the current EH</title>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	Error representation is too crude.  Currently any and all
+	error conditions are represented with ATA STATUS and ERROR
+	registers.  Errors which aren't ATA device errors are treated
+	as ATA device errors by setting ATA_ERR bit.  Better error
+	descriptor which can properly represent ATA and other
+	errors/exceptions is needed.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	When handling timeouts, no action is taken to make device
+	forget about the timed out command and ready for new commands.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	EH handling via ata_scsi_error() is not properly protected
+	from usual command processing.  On EH entrance, the device is
+	not in quiescent state.  Timed out commands may succeed or
+	fail any time.  pio_task and atapi_task may still be running.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Too weak error recovery.  Devices / controllers causing HSM
+	mismatch errors and other errors quite often require reset to
+	return to known state.  Also, advanced error handling is
+	necessary to support features like NCQ and hotplug.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	ATA errors are directly handled in the interrupt handler and
+	PIO errors in pio_task.  This is problematic for advanced
+	error handling for the following reasons.
+	</para>
+	<para>
+	First, advanced error handling often requires context and
+	internal qc execution.
+	</para>
+	<para>
+	Second, even a simple failure (say, CRC error) needs
+	information gathering and could trigger complex error handling
+	(say, resetting &amp; reconfiguring).  Having multiple code
+	paths to gather information, enter EH and trigger actions
+	makes life painful.
+	</para>
+	<para>
+	Third, scattered EH code makes implementing low level drivers
+	difficult.  Low level drivers override libata callbacks.  If
+	EH is scattered over several places, each affected callbacks
+	should perform its part of error handling.  This can be error
+	prone and painful.
+	</para>
+	</listitem>
+
+	</itemizedlist>
+	</sect1>
+  </chapter>
+
+  <chapter id="libataExt">
+     <title>libata Library</title>
+!Edrivers/ata/libata-core.c
+  </chapter>
+
+  <chapter id="libataInt">
+     <title>libata Core Internals</title>
+!Idrivers/ata/libata-core.c
+  </chapter>
+
+  <chapter id="libataScsiInt">
+     <title>libata SCSI translation/emulation</title>
+!Edrivers/ata/libata-scsi.c
+!Idrivers/ata/libata-scsi.c
+  </chapter>
+
+  <chapter id="ataExceptions">
+     <title>ATA errors and exceptions</title>
+
+  <para>
+  This chapter tries to identify what error/exception conditions exist
+  for ATA/ATAPI devices and describe how they should be handled in
+  implementation-neutral way.
+  </para>
+
+  <para>
+  The term 'error' is used to describe conditions where either an
+  explicit error condition is reported from device or a command has
+  timed out.
+  </para>
+
+  <para>
+  The term 'exception' is either used to describe exceptional
+  conditions which are not errors (say, power or hotplug events), or
+  to describe both errors and non-error exceptional conditions.  Where
+  explicit distinction between error and exception is necessary, the
+  term 'non-error exception' is used.
+  </para>
+
+  <sect1 id="excat">
+     <title>Exception categories</title>
+     <para>
+     Exceptions are described primarily with respect to legacy
+     taskfile + bus master IDE interface.  If a controller provides
+     other better mechanism for error reporting, mapping those into
+     categories described below shouldn't be difficult.
+     </para>
+
+     <para>
+     In the following sections, two recovery actions - reset and
+     reconfiguring transport - are mentioned.  These are described
+     further in <xref linkend="exrec"/>.
+     </para>
+
+     <sect2 id="excatHSMviolation">
+        <title>HSM violation</title>
+        <para>
+        This error is indicated when STATUS value doesn't match HSM
+        requirement during issuing or execution any ATA/ATAPI command.
+        </para>
+
+	<itemizedlist>
+	<title>Examples</title>
+
+        <listitem>
+	<para>
+	ATA_STATUS doesn't contain !BSY &amp;&amp; DRDY &amp;&amp; !DRQ while trying
+	to issue a command.
+        </para>
+	</listitem>
+
+        <listitem>
+	<para>
+	!BSY &amp;&amp; !DRQ during PIO data transfer.
+        </para>
+	</listitem>
+
+        <listitem>
+	<para>
+	DRQ on command completion.
+        </para>
+	</listitem>
+
+        <listitem>
+	<para>
+	!BSY &amp;&amp; ERR after CDB transfer starts but before the
+        last byte of CDB is transferred.  ATA/ATAPI standard states
+        that &quot;The device shall not terminate the PACKET command
+        with an error before the last byte of the command packet has
+        been written&quot; in the error outputs description of PACKET
+        command and the state diagram doesn't include such
+        transitions.
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	In these cases, HSM is violated and not much information
+	regarding the error can be acquired from STATUS or ERROR
+	register.  IOW, this error can be anything - driver bug,
+	faulty device, controller and/or cable.
+	</para>
+
+	<para>
+	As HSM is violated, reset is necessary to restore known state.
+	Reconfiguring transport for lower speed might be helpful too
+	as transmission errors sometimes cause this kind of errors.
+	</para>
+     </sect2>
+     
+     <sect2 id="excatDevErr">
+        <title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title>
+
+	<para>
+	These are errors detected and reported by ATA/ATAPI devices
+	indicating device problems.  For this type of errors, STATUS
+	and ERROR register values are valid and describe error
+	condition.  Note that some of ATA bus errors are detected by
+	ATA/ATAPI devices and reported using the same mechanism as
+	device errors.  Those cases are described later in this
+	section.
+	</para>
+
+	<para>
+	For ATA commands, this type of errors are indicated by !BSY
+	&amp;&amp; ERR during command execution and on completion.
+	</para>
+
+	<para>For ATAPI commands,</para>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	!BSY &amp;&amp; ERR &amp;&amp; ABRT right after issuing PACKET
+	indicates that PACKET command is not supported and falls in
+	this category.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	!BSY &amp;&amp; ERR(==CHK) &amp;&amp; !ABRT after the last
+	byte of CDB is transferred indicates CHECK CONDITION and
+	doesn't fall in this category.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	!BSY &amp;&amp; ERR(==CHK) &amp;&amp; ABRT after the last byte
+        of CDB is transferred *probably* indicates CHECK CONDITION and
+        doesn't fall in this category.
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	Of errors detected as above, the followings are not ATA/ATAPI
+	device errors but ATA bus errors and should be handled
+	according to <xref linkend="excatATAbusErr"/>.
+	</para>
+
+	<variablelist>
+
+	   <varlistentry>
+	   <term>CRC error during data transfer</term>
+	   <listitem>
+	   <para>
+	   This is indicated by ICRC bit in the ERROR register and
+	   means that corruption occurred during data transfer.  Up to
+	   ATA/ATAPI-7, the standard specifies that this bit is only
+	   applicable to UDMA transfers but ATA/ATAPI-8 draft revision
+	   1f says that the bit may be applicable to multiword DMA and
+	   PIO.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry>
+	   <term>ABRT error during data transfer or on completion</term>
+	   <listitem>
+	   <para>
+	   Up to ATA/ATAPI-7, the standard specifies that ABRT could be
+	   set on ICRC errors and on cases where a device is not able
+	   to complete a command.  Combined with the fact that MWDMA
+	   and PIO transfer errors aren't allowed to use ICRC bit up to
+	   ATA/ATAPI-7, it seems to imply that ABRT bit alone could
+	   indicate transfer errors.
+	   </para>
+	   <para>
+	   However, ATA/ATAPI-8 draft revision 1f removes the part
+	   that ICRC errors can turn on ABRT.  So, this is kind of
+	   gray area.  Some heuristics are needed here.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	</variablelist>
+
+	<para>
+	ATA/ATAPI device errors can be further categorized as follows.
+	</para>
+
+	<variablelist>
+
+	   <varlistentry>
+	   <term>Media errors</term>
+	   <listitem>
+	   <para>
+	   This is indicated by UNC bit in the ERROR register.  ATA
+	   devices reports UNC error only after certain number of
+	   retries cannot recover the data, so there's nothing much
+	   else to do other than notifying upper layer.
+	   </para>
+	   <para>
+	   READ and WRITE commands report CHS or LBA of the first
+	   failed sector but ATA/ATAPI standard specifies that the
+	   amount of transferred data on error completion is
+	   indeterminate, so we cannot assume that sectors preceding
+	   the failed sector have been transferred and thus cannot
+	   complete those sectors successfully as SCSI does.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry>
+	   <term>Media changed / media change requested error</term>
+	   <listitem>
+	   <para>
+	   &lt;&lt;TODO: fill here&gt;&gt;
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>Address error</term>
+	   <listitem>
+	   <para>
+	   This is indicated by IDNF bit in the ERROR register.
+	   Report to upper layer.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>Other errors</term>
+	   <listitem>
+	   <para>
+	   This can be invalid command or parameter indicated by ABRT
+	   ERROR bit or some other error condition.  Note that ABRT
+	   bit can indicate a lot of things including ICRC and Address
+	   errors.  Heuristics needed.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	</variablelist>
+
+	<para>
+	Depending on commands, not all STATUS/ERROR bits are
+	applicable.  These non-applicable bits are marked with
+	&quot;na&quot; in the output descriptions but up to ATA/ATAPI-7
+	no definition of &quot;na&quot; can be found.  However,
+	ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as
+	follows.
+	</para>
+
+	<blockquote>
+	<variablelist>
+	   <varlistentry><term>3.2.3.3a N/A</term>
+	   <listitem>
+	   <para>
+	   A keyword the indicates a field has no defined value in
+	   this standard and should not be checked by the host or
+	   device. N/A fields should be cleared to zero.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+	</variablelist>
+	</blockquote>
+
+	<para>
+	So, it seems reasonable to assume that &quot;na&quot; bits are
+	cleared to zero by devices and thus need no explicit masking.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatATAPIcc">
+        <title>ATAPI device CHECK CONDITION</title>
+
+	<para>
+	ATAPI device CHECK CONDITION error is indicated by set CHK bit
+	(ERR bit) in the STATUS register after the last byte of CDB is
+	transferred for a PACKET command.  For this kind of errors,
+	sense data should be acquired to gather information regarding
+	the errors.  REQUEST SENSE packet command should be used to
+	acquire sense data.
+	</para>
+
+	<para>
+	Once sense data is acquired, this type of errors can be
+	handled similary to other SCSI errors.  Note that sense data
+	may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
+	&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR).  In such
+	cases, the error should be considered as an ATA bus error and
+	handled according to <xref linkend="excatATAbusErr"/>.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatNCQerr">
+        <title>ATA device error (NCQ)</title>
+
+	<para>
+	NCQ command error is indicated by cleared BSY and set ERR bit
+	during NCQ command phase (one or more NCQ commands
+	outstanding).  Although STATUS and ERROR registers will
+	contain valid values describing the error, READ LOG EXT is
+	required to clear the error condition, determine which command
+	has failed and acquire more information.
+	</para>
+
+	<para>
+	READ LOG EXT Log Page 10h reports which tag has failed and
+	taskfile register values describing the error.  With this
+	information the failed command can be handled as a normal ATA
+	command error as in <xref linkend="excatDevErr"/> and all
+	other in-flight commands must be retried.  Note that this
+	retry should not be counted - it's likely that commands
+	retried this way would have completed normally if it were not
+	for the failed command.
+	</para>
+
+	<para>
+	Note that ATA bus errors can be reported as ATA device NCQ
+	errors.  This should be handled as described in <xref
+	linkend="excatATAbusErr"/>.
+	</para>
+
+	<para>
+	If READ LOG EXT Log Page 10h fails or reports NQ, we're
+	thoroughly screwed.  This condition should be treated
+	according to <xref linkend="excatHSMviolation"/>.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatATAbusErr">
+        <title>ATA bus error</title>
+
+	<para>
+	ATA bus error means that data corruption occurred during
+	transmission over ATA bus (SATA or PATA).  This type of errors
+	can be indicated by
+	</para>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	ICRC or ABRT error as described in <xref linkend="excatDevErr"/>.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Controller-specific error completion with error information
+	indicating transmission error.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	On some controllers, command timeout.  In this case, there may
+	be a mechanism to determine that the timeout is due to
+	transmission error.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Unknown/random errors, timeouts and all sorts of weirdities.
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	As described above, transmission errors can cause wide variety
+	of symptoms ranging from device ICRC error to random device
+	lockup, and, for many cases, there is no way to tell if an
+	error condition is due to transmission error or not;
+	therefore, it's necessary to employ some kind of heuristic
+	when dealing with errors and timeouts.  For example,
+	encountering repetitive ABRT errors for known supported
+	command is likely to indicate ATA bus error.
+	</para>
+
+	<para>
+	Once it's determined that ATA bus errors have possibly
+	occurred, lowering ATA bus transmission speed is one of
+	actions which may alleviate the problem.  See <xref
+	linkend="exrecReconf"/> for more information.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatPCIbusErr">
+        <title>PCI bus error</title>
+
+	<para>
+	Data corruption or other failures during transmission over PCI
+	(or other system bus).  For standard BMDMA, this is indicated
+	by Error bit in the BMDMA Status register.  This type of
+	errors must be logged as it indicates something is very wrong
+	with the system.  Resetting host controller is recommended.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatLateCompletion">
+        <title>Late completion</title>
+
+	<para>
+	This occurs when timeout occurs and the timeout handler finds
+	out that the timed out command has completed successfully or
+	with error.  This is usually caused by lost interrupts.  This
+	type of errors must be logged.  Resetting host controller is
+	recommended.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatUnknown">
+        <title>Unknown error (timeout)</title>
+
+	<para>
+	This is when timeout occurs and the command is still
+	processing or the host and device are in unknown state.  When
+	this occurs, HSM could be in any valid or invalid state.  To
+	bring the device to known state and make it forget about the
+	timed out command, resetting is necessary.  The timed out
+	command may be retried.
+	</para>
+
+	<para>
+	Timeouts can also be caused by transmission errors.  Refer to
+	<xref linkend="excatATAbusErr"/> for more details.
+	</para>
+
+     </sect2>
+
+     <sect2 id="excatHoplugPM">
+        <title>Hotplug and power management exceptions</title>
+
+	<para>
+	&lt;&lt;TODO: fill here&gt;&gt;
+	</para>
+
+     </sect2>
+
+  </sect1>
+
+  <sect1 id="exrec">
+     <title>EH recovery actions</title>
+
+     <para>
+     This section discusses several important recovery actions.
+     </para>
+
+     <sect2 id="exrecClr">
+        <title>Clearing error condition</title>
+
+	<para>
+	Many controllers require its error registers to be cleared by
+	error handler.  Different controllers may have different
+	requirements.
+	</para>
+
+	<para>
+	For SATA, it's strongly recommended to clear at least SError
+	register during error handling.
+	</para>
+     </sect2>
+
+     <sect2 id="exrecRst">
+        <title>Reset</title>
+
+	<para>
+	During EH, resetting is necessary in the following cases.
+	</para>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	HSM is in unknown or invalid state
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	HBA is in unknown or invalid state
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	EH needs to make HBA/device forget about in-flight commands
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	HBA/device behaves weirdly
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	Resetting during EH might be a good idea regardless of error
+	condition to improve EH robustness.  Whether to reset both or
+	either one of HBA and device depends on situation but the
+	following scheme is recommended.
+	</para>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	When it's known that HBA is in ready state but ATA/ATAPI
+	device is in unknown state, reset only device.
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	If HBA is in unknown state, reset both HBA and device.
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	HBA resetting is implementation specific.  For a controller
+	complying to taskfile/BMDMA PCI IDE, stopping active DMA
+	transaction may be sufficient iff BMDMA state is the only HBA
+	context.  But even mostly taskfile/BMDMA PCI IDE complying
+	controllers may have implementation specific requirements and
+	mechanism to reset themselves.  This must be addressed by
+	specific drivers.
+	</para>
+
+	<para>
+	OTOH, ATA/ATAPI standard describes in detail ways to reset
+	ATA/ATAPI devices.
+	</para>
+
+	<variablelist>
+
+	   <varlistentry><term>PATA hardware reset</term>
+	   <listitem>
+	   <para>
+	   This is hardware initiated device reset signalled with
+	   asserted PATA RESET- signal.  There is no standard way to
+	   initiate hardware reset from software although some
+	   hardware provides registers that allow driver to directly
+	   tweak the RESET- signal.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>Software reset</term>
+	   <listitem>
+	   <para>
+	   This is achieved by turning CONTROL SRST bit on for at
+	   least 5us.  Both PATA and SATA support it but, in case of
+	   SATA, this may require controller-specific support as the
+	   second Register FIS to clear SRST should be transmitted
+	   while BSY bit is still set.  Note that on PATA, this resets
+	   both master and slave devices on a channel.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term>
+	   <listitem>
+	   <para>
+	   Although ATA/ATAPI standard doesn't describe exactly, EDD
+	   implies some level of resetting, possibly similar level
+	   with software reset.  Host-side EDD protocol can be handled
+	   with normal command processing and most SATA controllers
+	   should be able to handle EDD's just like other commands.
+	   As in software reset, EDD affects both devices on a PATA
+	   bus.
+	   </para>
+	   <para>
+	   Although EDD does reset devices, this doesn't suit error
+	   handling as EDD cannot be issued while BSY is set and it's
+	   unclear how it will act when device is in unknown/weird
+	   state.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>ATAPI DEVICE RESET command</term>
+	   <listitem>
+	   <para>
+	   This is very similar to software reset except that reset
+	   can be restricted to the selected device without affecting
+	   the other device sharing the cable.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	   <varlistentry><term>SATA phy reset</term>
+	   <listitem>
+	   <para>
+	   This is the preferred way of resetting a SATA device.  In
+	   effect, it's identical to PATA hardware reset.  Note that
+	   this can be done with the standard SCR Control register.
+	   As such, it's usually easier to implement than software
+	   reset.
+	   </para>
+	   </listitem>
+	   </varlistentry>
+
+	</variablelist>
+
+	<para>
+	One more thing to consider when resetting devices is that
+	resetting clears certain configuration parameters and they
+	need to be set to their previous or newly adjusted values
+	after reset.
+	</para>
+
+	<para>
+	Parameters affected are.
+	</para>
+
+	<itemizedlist>
+
+	<listitem>
+	<para>
+	CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used)
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Parameters set with SET FEATURES including transfer mode setting
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Block count set with SET MULTIPLE MODE
+	</para>
+	</listitem>
+
+	<listitem>
+	<para>
+	Other parameters (SET MAX, MEDIA LOCK...)
+	</para>
+	</listitem>
+
+	</itemizedlist>
+
+	<para>
+	ATA/ATAPI standard specifies that some parameters must be
+	maintained across hardware or software reset, but doesn't
+	strictly specify all of them.  Always reconfiguring needed
+	parameters after reset is required for robustness.  Note that
+	this also applies when resuming from deep sleep (power-off).
+	</para>
+
+	<para>
+	Also, ATA/ATAPI standard requires that IDENTIFY DEVICE /
+	IDENTIFY PACKET DEVICE is issued after any configuration
+	parameter is updated or a hardware reset and the result used
+	for further operation.  OS driver is required to implement
+	revalidation mechanism to support this.
+	</para>
+
+     </sect2>
+
+     <sect2 id="exrecReconf">
+        <title>Reconfigure transport</title>
+
+	<para>
+	For both PATA and SATA, a lot of corners are cut for cheap
+	connectors, cables or controllers and it's quite common to see
+	high transmission error rate.  This can be mitigated by
+	lowering transmission speed.
+	</para>
+
+	<para>
+	The following is a possible scheme Jeff Garzik suggested.
+	</para>
+
+	<blockquote>
+	<para>
+	If more than $N (3?) transmission errors happen in 15 minutes,
+	</para>	
+	<itemizedlist>
+	<listitem>
+	<para>
+	if SATA, decrease SATA PHY speed.  if speed cannot be decreased,
+	</para>
+	</listitem>
+	<listitem>
+	<para>
+	decrease UDMA xfer speed.  if at UDMA0, switch to PIO4,
+	</para>
+	</listitem>
+	<listitem>
+	<para>
+	decrease PIO xfer speed.  if at PIO3, complain, but continue
+	</para>
+	</listitem>
+	</itemizedlist>
+	</blockquote>
+
+     </sect2>
+
+  </sect1>
+
+  </chapter>
+
+  <chapter id="PiixInt">
+     <title>ata_piix Internals</title>
+!Idrivers/ata/ata_piix.c
+  </chapter>
+
+  <chapter id="SILInt">
+     <title>sata_sil Internals</title>
+!Idrivers/ata/sata_sil.c
+  </chapter>
+
+  <chapter id="libataThanks">
+     <title>Thanks</title>
+  <para>
+  The bulk of the ATA knowledge comes thanks to long conversations with
+  Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
+  and SCSI specifications.
+  </para>
+  <para>
+  Thanks to Alan Cox for pointing out similarities 
+  between SATA and SCSI, and in general for motivation to hack on
+  libata.
+  </para>
+  <para>
+  libata's device detection
+  method, ata_pio_devchk, and in general all the early probing was
+  based on extensive study of Hale Landis's probe/reset code in his
+  ATADRVR driver (www.ata-atapi.com).
+  </para>
+  </chapter>
+
+</book>

linux-imx/Documentation/DocBook/librs.tmpl

diff --git a/linux-imx/Documentation/DocBook/librs.tmpl b/linux-imx/Documentation/DocBook/librs.tmpl
new file mode 100644
index 0000000..94f2136
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/librs.tmpl
@@ -0,0 +1,289 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Reed-Solomon-Library-Guide">
+ <bookinfo>
+  <title>Reed-Solomon Library Programming Interface</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Thomas</firstname>
+    <surname>Gleixner</surname>
+    <affiliation>
+     <address>
+      <email>tglx@linutronix.de</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2004</year>
+   <holder>Thomas Gleixner</holder>
+  </copyright>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License version 2 as published by the Free Software Foundation.
+   </para>
+      
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+      
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+      
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+      <title>Introduction</title>
+  <para>
+  	The generic Reed-Solomon Library provides encoding, decoding
+	and error correction functions.
+  </para>
+  <para>
+  	Reed-Solomon codes are used in communication and storage
+	applications to ensure data integrity. 
+  </para>
+  <para>
+  	This documentation is provided for developers who want to utilize
+	the functions provided by the library.
+  </para>
+  </chapter>
+  
+  <chapter id="bugs">
+     <title>Known Bugs And Assumptions</title>
+  <para>
+	None.	
+  </para>
+  </chapter>
+
+  <chapter id="usage">
+     	<title>Usage</title>
+	<para>
+		This chapter provides examples of how to use the library.
+	</para>
+	<sect1>
+		<title>Initializing</title>
+		<para>
+			The init function init_rs returns a pointer to an
+			rs decoder structure, which holds the necessary
+			information for encoding, decoding and error correction
+			with the given polynomial. It either uses an existing
+			matching decoder or creates a new one. On creation all
+			the lookup tables for fast en/decoding are created.
+			The function may take a while, so make sure not to 
+			call it in critical code paths.
+		</para>
+		<programlisting>
+/* the Reed Solomon control structure */
+static struct rs_control *rs_decoder;
+
+/* Symbolsize is 10 (bits)
+ * Primitive polynomial is x^10+x^3+1
+ * first consecutive root is 0
+ * primitive element to generate roots = 1
+ * generator polynomial degree (number of roots) = 6
+ */
+rs_decoder = init_rs (10, 0x409, 0, 1, 6);
+		</programlisting>
+	</sect1>
+	<sect1>
+		<title>Encoding</title>
+		<para>
+			The encoder calculates the Reed-Solomon code over
+			the given data length and stores the result in 
+			the parity buffer. Note that the parity buffer must
+			be initialized before calling the encoder.
+		</para>
+		<para>
+			The expanded data can be inverted on the fly by
+			providing a non-zero inversion mask. The expanded data is
+			XOR'ed with the mask. This is used e.g. for FLASH
+			ECC, where the all 0xFF is inverted to an all 0x00.
+			The Reed-Solomon code for all 0x00 is all 0x00. The
+			code is inverted before storing to FLASH so it is 0xFF
+			too. This prevents that reading from an erased FLASH
+			results in ECC errors.
+		</para>
+		<para>
+			The databytes are expanded to the given symbol size
+			on the fly. There is no support for encoding continuous
+			bitstreams with a symbol size != 8 at the moment. If
+			it is necessary it should be not a big deal to implement
+			such functionality.
+		</para>
+		<programlisting>
+/* Parity buffer. Size = number of roots */
+uint16_t par[6];
+/* Initialize the parity buffer */
+memset(par, 0, sizeof(par));
+/* Encode 512 byte in data8. Store parity in buffer par */
+encode_rs8 (rs_decoder, data8, 512, par, 0);
+		</programlisting>
+	</sect1>
+	<sect1>
+		<title>Decoding</title>
+		<para>
+			The decoder calculates the syndrome over
+			the given data length and the received parity symbols
+			and corrects errors in the data.
+		</para>
+		<para>
+			If a syndrome is available from a hardware decoder
+			then the syndrome calculation is skipped.
+		</para>
+		<para>
+			The correction of the data buffer can be suppressed
+			by providing a correction pattern buffer and an error
+			location buffer to the decoder. The decoder stores the
+			calculated error location and the correction bitmask
+			in the given buffers. This is useful for hardware
+			decoders which use a weird bit ordering scheme.
+		</para>
+		<para>
+			The databytes are expanded to the given symbol size
+			on the fly. There is no support for decoding continuous
+			bitstreams with a symbolsize != 8 at the moment. If
+			it is necessary it should be not a big deal to implement
+			such functionality.
+		</para>
+		
+		<sect2>
+		<title>
+			Decoding with syndrome calculation, direct data correction
+		</title>
+		<programlisting>
+/* Parity buffer. Size = number of roots */
+uint16_t par[6];
+uint8_t  data[512];
+int numerr;
+/* Receive data */
+.....
+/* Receive parity */
+.....
+/* Decode 512 byte in data8.*/
+numerr = decode_rs8 (rs_decoder, data8, par, 512, NULL, 0, NULL, 0, NULL);
+		</programlisting>
+		</sect2>
+
+		<sect2>
+		<title>
+			Decoding with syndrome given by hardware decoder, direct data correction
+		</title>
+		<programlisting>
+/* Parity buffer. Size = number of roots */
+uint16_t par[6], syn[6];
+uint8_t  data[512];
+int numerr;
+/* Receive data */
+.....
+/* Receive parity */
+.....
+/* Get syndrome from hardware decoder */
+.....
+/* Decode 512 byte in data8.*/
+numerr = decode_rs8 (rs_decoder, data8, par, 512, syn, 0, NULL, 0, NULL);
+		</programlisting>
+		</sect2>
+
+		<sect2>
+		<title>
+			Decoding with syndrome given by hardware decoder, no direct data correction.
+		</title>
+		<para>
+			Note: It's not necessary to give data and received parity to the decoder.
+		</para>
+		<programlisting>
+/* Parity buffer. Size = number of roots */
+uint16_t par[6], syn[6], corr[8];
+uint8_t  data[512];
+int numerr, errpos[8];
+/* Receive data */
+.....
+/* Receive parity */
+.....
+/* Get syndrome from hardware decoder */
+.....
+/* Decode 512 byte in data8.*/
+numerr = decode_rs8 (rs_decoder, NULL, NULL, 512, syn, 0, errpos, 0, corr);
+for (i = 0; i &lt; numerr; i++) {
+	do_error_correction_in_your_buffer(errpos[i], corr[i]);
+}
+		</programlisting>
+		</sect2>
+	</sect1>
+	<sect1>
+		<title>Cleanup</title>
+		<para>
+			The function free_rs frees the allocated resources,
+			if the caller is the last user of the decoder.
+		</para>
+		<programlisting>
+/* Release resources */
+free_rs(rs_decoder);
+		</programlisting>
+	</sect1>
+
+  </chapter>
+	
+  <chapter id="structs">
+     <title>Structures</title>
+     <para>
+     This chapter contains the autogenerated documentation of the structures which are
+     used in the Reed-Solomon Library and are relevant for a developer.
+     </para>
+!Iinclude/linux/rslib.h
+  </chapter>
+
+  <chapter id="pubfunctions">
+     <title>Public Functions Provided</title>
+     <para>
+     This chapter contains the autogenerated documentation of the Reed-Solomon functions
+     which are exported.
+     </para>
+!Elib/reed_solomon/reed_solomon.c
+  </chapter>
+  
+  <chapter id="credits">
+     <title>Credits</title>
+	<para>
+		The library code for encoding and decoding was written by Phil Karn.
+	</para>
+	<programlisting>
+		Copyright 2002, Phil Karn, KA9Q
+ 		May be used under the terms of the GNU General Public License (GPL)
+	</programlisting>
+	<para>
+		The wrapper functions and interfaces are written by Thomas Gleixner.
+	</para>
+	<para>
+		Many users have provided bugfixes, improvements and helping hands for testing.
+		Thanks a lot.
+	</para>
+	<para>
+		The following people have contributed to this document:
+	</para>
+	<para>
+		Thomas Gleixner<email>tglx@linutronix.de</email>
+	</para>
+  </chapter>
+</book>

linux-imx/Documentation/DocBook/lsm.tmpl

diff --git a/linux-imx/Documentation/DocBook/lsm.tmpl b/linux-imx/Documentation/DocBook/lsm.tmpl
new file mode 100644
index 0000000..fe7664c
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/lsm.tmpl
@@ -0,0 +1,265 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<article class="whitepaper" id="LinuxSecurityModule" lang="en">
+ <articleinfo>
+ <title>Linux Security Modules:  General Security Hooks for Linux</title>
+ <authorgroup>
+ <author>
+ <firstname>Stephen</firstname> 
+ <surname>Smalley</surname>
+ <affiliation>
+ <orgname>NAI Labs</orgname>
+ <address><email>ssmalley@nai.com</email></address>
+ </affiliation>
+ </author>
+ <author>
+ <firstname>Timothy</firstname> 
+ <surname>Fraser</surname>
+ <affiliation>
+ <orgname>NAI Labs</orgname>
+ <address><email>tfraser@nai.com</email></address>
+ </affiliation>
+ </author>
+ <author>
+ <firstname>Chris</firstname> 
+ <surname>Vance</surname>
+ <affiliation>
+ <orgname>NAI Labs</orgname>
+ <address><email>cvance@nai.com</email></address>
+ </affiliation>
+ </author>
+ </authorgroup>
+ </articleinfo>
+
+<sect1 id="Introduction"><title>Introduction</title>
+
+<para>
+In March 2001, the National Security Agency (NSA) gave a presentation
+about Security-Enhanced Linux (SELinux) at the 2.5 Linux Kernel
+Summit.  SELinux is an implementation of flexible and fine-grained
+nondiscretionary access controls in the Linux kernel, originally
+implemented as its own particular kernel patch.  Several other
+security projects (e.g. RSBAC, Medusa) have also developed flexible
+access control architectures for the Linux kernel, and various
+projects have developed particular access control models for Linux
+(e.g. LIDS, DTE, SubDomain).  Each project has developed and
+maintained its own kernel patch to support its security needs.
+</para>
+
+<para>
+In response to the NSA presentation, Linus Torvalds made a set of
+remarks that described a security framework he would be willing to
+consider for inclusion in the mainstream Linux kernel.  He described a
+general framework that would provide a set of security hooks to
+control operations on kernel objects and a set of opaque security
+fields in kernel data structures for maintaining security attributes.
+This framework could then be used by loadable kernel modules to
+implement any desired model of security.  Linus also suggested the
+possibility of migrating the Linux capabilities code into such a
+module.
+</para>
+
+<para>
+The Linux Security Modules (LSM) project was started by WireX to
+develop such a framework.  LSM is a joint development effort by
+several security projects, including Immunix, SELinux, SGI and Janus,
+and several individuals, including Greg Kroah-Hartman and James
+Morris, to develop a Linux kernel patch that implements this
+framework.  The patch is currently tracking the 2.4 series and is
+targeted for integration into the 2.5 development series.  This
+technical report provides an overview of the framework and the example
+capabilities security module provided by the LSM kernel patch.
+</para>
+
+</sect1>
+
+<sect1 id="framework"><title>LSM Framework</title>
+
+<para>
+The LSM kernel patch provides a general kernel framework to support
+security modules.  In particular, the LSM framework is primarily
+focused on supporting access control modules, although future
+development is likely to address other security needs such as
+auditing.  By itself, the framework does not provide any additional
+security; it merely provides the infrastructure to support security
+modules.  The LSM kernel patch also moves most of the capabilities
+logic into an optional security module, with the system defaulting
+to the traditional superuser logic.  This capabilities module
+is discussed further in <xref linkend="cap"/>.
+</para>
+
+<para>
+The LSM kernel patch adds security fields to kernel data structures
+and inserts calls to hook functions at critical points in the kernel
+code to manage the security fields and to perform access control.  It
+also adds functions for registering and unregistering security
+modules, and adds a general <function>security</function> system call
+to support new system calls for security-aware applications.
+</para>
+
+<para>
+The LSM security fields are simply <type>void*</type> pointers.  For
+process and program execution security information, security fields
+were added to <structname>struct task_struct</structname> and 
+<structname>struct linux_binprm</structname>.  For filesystem security
+information, a security field was added to 
+<structname>struct super_block</structname>.  For pipe, file, and socket
+security information, security fields were added to 
+<structname>struct inode</structname> and 
+<structname>struct file</structname>.  For packet and network device security
+information, security fields were added to
+<structname>struct sk_buff</structname> and
+<structname>struct net_device</structname>.  For System V IPC security
+information, security fields were added to
+<structname>struct kern_ipc_perm</structname> and
+<structname>struct msg_msg</structname>; additionally, the definitions
+for <structname>struct msg_msg</structname>, <structname>struct 
+msg_queue</structname>, and <structname>struct 
+shmid_kernel</structname> were moved to header files
+(<filename>include/linux/msg.h</filename> and
+<filename>include/linux/shm.h</filename> as appropriate) to allow
+the security modules to use these definitions.
+</para>
+
+<para>
+Each LSM hook is a function pointer in a global table,
+security_ops. This table is a
+<structname>security_operations</structname> structure as defined by
+<filename>include/linux/security.h</filename>.  Detailed documentation
+for each hook is included in this header file.  At present, this
+structure consists of a collection of substructures that group related
+hooks based on the kernel object (e.g. task, inode, file, sk_buff,
+etc) as well as some top-level hook function pointers for system
+operations.  This structure is likely to be flattened in the future
+for performance.  The placement of the hook calls in the kernel code
+is described by the "called:" lines in the per-hook documentation in
+the header file.  The hook calls can also be easily found in the
+kernel code by looking for the string "security_ops->".
+
+</para>
+
+<para>
+Linus mentioned per-process security hooks in his original remarks as a
+possible alternative to global security hooks.  However, if LSM were
+to start from the perspective of per-process hooks, then the base
+framework would have to deal with how to handle operations that
+involve multiple processes (e.g. kill), since each process might have
+its own hook for controlling the operation.  This would require a
+general mechanism for composing hooks in the base framework.
+Additionally, LSM would still need global hooks for operations that
+have no process context (e.g. network input operations).
+Consequently, LSM provides global security hooks, but a security
+module is free to implement per-process hooks (where that makes sense)
+by storing a security_ops table in each process' security field and
+then invoking these per-process hooks from the global hooks.
+The problem of composition is thus deferred to the module.
+</para>
+
+<para>
+The global security_ops table is initialized to a set of hook
+functions provided by a dummy security module that provides
+traditional superuser logic.  A <function>register_security</function>
+function (in <filename>security/security.c</filename>) is provided to
+allow a security module to set security_ops to refer to its own hook
+functions, and an <function>unregister_security</function> function is
+provided to revert security_ops to the dummy module hooks.  This
+mechanism is used to set the primary security module, which is
+responsible for making the final decision for each hook.
+</para>
+
+<para>
+LSM also provides a simple mechanism for stacking additional security
+modules with the primary security module.  It defines
+<function>register_security</function> and
+<function>unregister_security</function> hooks in the
+<structname>security_operations</structname> structure and provides
+<function>mod_reg_security</function> and
+<function>mod_unreg_security</function> functions that invoke these
+hooks after performing some sanity checking.  A security module can
+call these functions in order to stack with other modules.  However,
+the actual details of how this stacking is handled are deferred to the
+module, which can implement these hooks in any way it wishes
+(including always returning an error if it does not wish to support
+stacking).  In this manner, LSM again defers the problem of
+composition to the module.
+</para>
+
+<para>
+Although the LSM hooks are organized into substructures based on
+kernel object, all of the hooks can be viewed as falling into two
+major categories: hooks that are used to manage the security fields
+and hooks that are used to perform access control.  Examples of the
+first category of hooks include the
+<function>alloc_security</function> and
+<function>free_security</function> hooks defined for each kernel data
+structure that has a security field.  These hooks are used to allocate
+and free security structures for kernel objects.  The first category
+of hooks also includes hooks that set information in the security
+field after allocation, such as the <function>post_lookup</function>
+hook in <structname>struct inode_security_ops</structname>.  This hook
+is used to set security information for inodes after successful lookup
+operations.  An example of the second category of hooks is the
+<function>permission</function> hook in 
+<structname>struct inode_security_ops</structname>.  This hook checks
+permission when accessing an inode.
+</para>
+
+</sect1>
+
+<sect1 id="cap"><title>LSM Capabilities Module</title>
+
+<para>
+The LSM kernel patch moves most of the existing POSIX.1e capabilities
+logic into an optional security module stored in the file
+<filename>security/capability.c</filename>.  This change allows
+users who do not want to use capabilities to omit this code entirely
+from their kernel, instead using the dummy module for traditional
+superuser logic or any other module that they desire.  This change
+also allows the developers of the capabilities logic to maintain and
+enhance their code more freely, without needing to integrate patches
+back into the base kernel.
+</para>
+
+<para>
+In addition to moving the capabilities logic, the LSM kernel patch
+could move the capability-related fields from the kernel data
+structures into the new security fields managed by the security
+modules.  However, at present, the LSM kernel patch leaves the
+capability fields in the kernel data structures.  In his original
+remarks, Linus suggested that this might be preferable so that other
+security modules can be easily stacked with the capabilities module
+without needing to chain multiple security structures on the security field.
+It also avoids imposing extra overhead on the capabilities module
+to manage the security fields.  However, the LSM framework could
+certainly support such a move if it is determined to be desirable,
+with only a few additional changes described below.
+</para>
+
+<para>
+At present, the capabilities logic for computing process capabilities
+on <function>execve</function> and <function>set*uid</function>,
+checking capabilities for a particular process, saving and checking
+capabilities for netlink messages, and handling the
+<function>capget</function> and <function>capset</function> system
+calls have been moved into the capabilities module.  There are still a
+few locations in the base kernel where capability-related fields are
+directly examined or modified, but the current version of the LSM
+patch does allow a security module to completely replace the
+assignment and testing of capabilities.  These few locations would
+need to be changed if the capability-related fields were moved into
+the security field.  The following is a list of known locations that
+still perform such direct examination or modification of
+capability-related fields:
+<itemizedlist>
+<listitem><para><filename>fs/open.c</filename>:<function>sys_access</function></para></listitem>
+<listitem><para><filename>fs/lockd/host.c</filename>:<function>nlm_bind_host</function></para></listitem>
+<listitem><para><filename>fs/nfsd/auth.c</filename>:<function>nfsd_setuser</function></para></listitem>
+<listitem><para><filename>fs/proc/array.c</filename>:<function>task_cap</function></para></listitem>
+</itemizedlist>
+</para>
+
+</sect1>
+
+</article>

linux-imx/Documentation/DocBook/media/Makefile

diff --git a/linux-imx/Documentation/DocBook/media/Makefile b/linux-imx/Documentation/DocBook/media/Makefile
new file mode 100644
index 0000000..1d27f0a
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/Makefile
@@ -0,0 +1,388 @@
+###
+# Media build rules - Auto-generates media contents/indexes and *.h xml's
+#
+
+SHELL=/bin/bash
+
+MEDIA_OBJ_DIR=$(objtree)/Documentation/DocBook/
+MEDIA_SRC_DIR=$(srctree)/Documentation/DocBook/media
+
+MEDIA_TEMP =  media-entities.tmpl \
+	      media-indices.tmpl \
+	      videodev2.h.xml \
+	      v4l2.xml \
+	      audio.h.xml \
+	      ca.h.xml \
+	      dmx.h.xml \
+	      frontend.h.xml \
+	      net.h.xml \
+	      video.h.xml \
+
+IMGFILES := $(patsubst %.b64,%, $(notdir $(shell ls $(MEDIA_SRC_DIR)/*.b64)))
+OBJIMGFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(IMGFILES))
+GENFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(MEDIA_TEMP))
+
+PHONY += cleanmediadocs
+
+cleanmediadocs:
+	-@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+
+$(obj)/media_api.xml: $(GENFILES) FORCE
+
+#$(MEDIA_OBJ_DIR)/media_api.html: $(MEDIA_OBJ_DIR)/media_api.xml
+#$(MEDIA_OBJ_DIR)/media_api.pdf: $(MEDIA_OBJ_DIR)/media_api.xml
+#$(MEDIA_OBJ_DIR)/media_api.ps: $(MEDIA_OBJ_DIR)/media_api.xml
+
+V4L_SGMLS = \
+	$(shell ls $(MEDIA_SRC_DIR)/v4l/*.xml|perl -ne 'print "$$1 " if (m,.*/(.*)\n,)') \
+	capture.c.xml \
+	keytable.c.xml \
+	v4l2grab.c.xml
+
+DVB_SGMLS = \
+	$(shell ls $(MEDIA_SRC_DIR)/dvb/*.xml|perl -ne 'print "$$1 " if (m,.*/(.*)\n,)')
+
+MEDIA_SGMLS =  $(addprefix ./,$(V4L_SGMLS)) $(addprefix ./,$(DVB_SGMLS)) $(addprefix ./,$(MEDIA_TEMP))
+
+FUNCS = \
+	close \
+	ioctl \
+	mmap \
+	munmap \
+	open \
+	poll \
+	read \
+	select \
+	write \
+
+IOCTLS = \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
+	VIDIOC_SUBDEV_G_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_S_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_ENUM_MBUS_CODE \
+	VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
+	VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_G_SELECTION \
+	VIDIOC_SUBDEV_S_SELECTION \
+
+TYPES = \
+	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/uapi/linux/dvb/frontend.h)
+
+ENUMS = \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h)
+
+STRUCTS = \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/uapi/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h)
+
+ERRORS = \
+	E2BIG \
+	EACCES \
+	EAGAIN \
+	EBADF \
+	EBADFD \
+	EBADR \
+	EBADRQC \
+	EBUSY \
+	ECHILD \
+	ECONNRESET \
+	EDEADLK \
+	EDOM \
+	EEXIST \
+	EFAULT \
+	EFBIG \
+	EILSEQ \
+	EINIT \
+	EINPROGRESS \
+	EINTR \
+	EINVAL \
+	EIO \
+	EMFILE \
+	ENFILE \
+	ENOBUFS \
+	ENODATA \
+	ENODEV \
+	ENOENT \
+	ENOIOCTLCMD \
+	ENOMEM \
+	ENOSPC \
+	ENOSR \
+	ENOSYS \
+	ENOTSUP \
+	ENOTSUPP \
+	ENOTTY \
+	ENXIO \
+	EOPNOTSUPP \
+	EOVERFLOW \
+	EPERM \
+	EPIPE \
+	EPROTO \
+	ERANGE \
+	EREMOTE \
+	EREMOTEIO \
+	ERESTART \
+	ERESTARTSYS \
+	ESHUTDOWN \
+	ESPIPE \
+	ETIME \
+	ETIMEDOUT \
+	EUSERS \
+	EWOULDBLOCK \
+	EXDEV \
+
+ESCAPE = \
+	-e "s/&/\\&/g" \
+	-e "s/</\\&lt;/g" \
+	-e "s/>/\\&gt;/g"
+
+FILENAME = \
+	-e s,"^[^\/]*/",, \
+	-e s/"\\.xml"// \
+	-e s/"\\.tmpl"// \
+	-e s/\\\./-/g \
+	-e s/"^func-"// \
+	-e s/"^pixfmt-"// \
+	-e s/"^vidioc-"//
+
+# Generate references to these structs in videodev2.h.xml.
+DOCUMENTED = \
+	-e "s/\(enum *\)v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1<link linkend=\"\2\">v4l2_mpeg_cx2341x_video_\2<\/link>/g" \
+	-e "s/\(\(enum\|struct\) *\)\(v4l2_[a-zA-Z0-9_]*\)/\1<link linkend=\"\3\">\3<\/link>/g" \
+	-e "s/\(V4L2_PIX_FMT_[A-Z0-9_]\+\) /<link linkend=\"\1\">\1<\/link> /g" \
+	-e ":a;s/\(linkend=\".*\)_\(.*\">\)/\1-\2/;ta" \
+	-e "s/v4l2\-mpeg\-vbi\-ITV0/v4l2-mpeg-vbi-itv0-1/g"
+
+DVB_DOCUMENTED = \
+	-e "s/\(linkend\=\"\)FE_SET_PROPERTY/\1FE_GET_PROPERTY/g" \
+	-e "s,\(struct\s\+\)\([a-z0-9_]\+\)\(\s\+{\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,\(}\s\+\)\([a-z0-9_]\+_t\+\),\1\<link linkend=\"\2\">\2\<\/link\>,g" \
+	-e "s,\(define\s\+\)\(DTV_[A-Z0-9_]\+\)\(\s\+[0-9]\+\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,<link\s\+linkend=\".*\">\(DTV_IOCTL_MAX_MSGS\|dtv_cmds_h\|__.*_old\)<\/link>,\1,g" \
+	-e ":a;s/\(linkend=\".*\)_\(.*\">\)/\1-\2/;ta" \
+	-e "s,\(audio-mixer\|audio-karaoke\|audio-status\|ca-slot-info\|ca-descr-info\|ca-caps\|ca-msg\|ca-descr\|ca-pid\|dmx-filter\|dmx-caps\|video-system\|video-highlight\|video-spu\|video-spu-palette\|video-navi-pack\)-t,\1,g" \
+	-e "s,DTV-ISDBT-LAYER[A-C],DTV-ISDBT-LAYER,g" \
+	-e "s,\(define\s\+\)\([A-Z0-9_]\+\)\(\s\+_IO\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,<link\s\+linkend=\".*\">\(__.*_OLD\)<\/link>,\1,g" \
+
+#
+# Media targets and dependencies
+#
+
+install_media_images = \
+	$(Q)-cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
+
+$(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
+	$(Q)base64 -d $< >$@
+
+$(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES)
+	@$($(quiet)gen_xml)
+	@(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/)
+	@(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/)
+
+$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/uapi/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DOCUMENTED) |		\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/uapi/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/uapi/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/uapi/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/uapi/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/uapi/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/uapi/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(								\
+	echo "<!-- Generated file! Do not edit. -->") >$@
+	@(								\
+	echo -e "\n<!-- Functions -->") >>$@
+	@(								\
+	for ident in $(FUNCS) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  echo "<!ENTITY func-$$entity \"<link"				\
+	    "linkend='func-$$entity'><function>$$ident()</function></link>\">" \
+	  >>$@ ;							\
+	done)
+	@(								\
+	echo -e "\n<!-- Ioctls -->") >>$@
+	@(								\
+	for ident in $(IOCTLS) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
+	  echo "<!ENTITY $$entity \"<link"				\
+	    "linkend='$$id'><constant>$$ident</constant></link>\">"	\
+	  >>$@ ;							\
+	done)
+	@(								\
+	echo -e "\n<!-- Types -->") >>$@
+	@(								\
+	for ident in $(TYPES) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  echo "<!ENTITY $$entity \"<link"				\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Enums -->") >>$@
+	@(								\
+	for ident in $(ENUMS) ; do					\
+	  entity=`echo $$ident | sed -e "s/v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1/" | tr _ -` ; \
+	  echo "<!ENTITY $$entity \"enum&nbsp;<link"			\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Structures -->") >>$@
+	@(								\
+	for ident in $(STRUCTS) ; do					\
+	  entity=`echo $$ident | tr _ - | sed s/v4l2-mpeg-vbi-ITV0/v4l2-mpeg-vbi-itv0-1/g` ; \
+	  echo "<!ENTITY $$entity \"struct&nbsp;<link"			\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Error Codes -->") >>$@
+	@(								\
+	for ident in $(ERRORS) ; do					\
+	  echo "<!ENTITY $$ident \"<errorcode>$$ident</errorcode>"	\
+	    "error code\">" >>$@ ;					\
+	done)
+	@(								\
+	echo -e "\n<!-- Subsections -->") >>$@
+	@(								\
+	for file in $(MEDIA_SGMLS) ; do					\
+	  entity=`echo "$$file" | sed $(FILENAME) -e s/"^([^-]*)"/sub\1/` ; \
+	  if ! echo "$$file" |						\
+	    grep -q -E -e '^(func|vidioc|pixfmt)-' ; then		\
+	    echo "<!ENTITY sub-$$entity SYSTEM \"$$file\">" >>$@ ;	\
+	  fi ;								\
+	done)
+	@(								\
+	echo -e "\n<!-- Function Reference -->") >>$@
+	@(								\
+	for file in $(MEDIA_SGMLS) ; do					\
+	  if echo "$$file" |						\
+	    grep -q -E -e '(func|vidioc|pixfmt)-' ; then		\
+	    entity=`echo "$$file" |sed $(FILENAME)` ;			\
+	    echo "<!ENTITY $$entity SYSTEM \"$$file\">" >>$@ ;	\
+	  fi ;								\
+	done)
+
+# Jade can auto-generate a list-of-tables, which includes all structs,
+# but we only want data types, all types, and sorted please.
+$(MEDIA_OBJ_DIR)/media-indices.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(								\
+	echo "<!-- Generated file! Do not edit. -->") >$@
+	@(								\
+	echo -e "\n<index><title>List of Types</title>") >>$@
+	@(								\
+	for ident in $(TYPES) ; do					\
+	  id=`echo $$ident | tr _ -` ;					\
+	  echo "<indexentry><primaryie><link"				\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	for ident in $(ENUMS) ; do					\
+	  id=`echo $$ident | sed -e "s/v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1/" | tr _ -`; \
+	  echo "<indexentry><primaryie>enum&nbsp;<link"			\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	for ident in $(STRUCTS) ; do					\
+	  id=`echo $$ident | tr _ - | sed s/v4l2-mpeg-vbi-ITV0/v4l2-mpeg-vbi-itv0-1/g` ; \
+	  echo "<indexentry><primaryie>struct&nbsp;<link"		\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	echo "</index>") >>$@
+

linux-imx/Documentation/DocBook/media/bayer.png.b64

diff --git a/linux-imx/Documentation/DocBook/media/bayer.png.b64 b/linux-imx/Documentation/DocBook/media/bayer.png.b64
new file mode 100644
index 0000000..ccdf2bc
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/bayer.png.b64
@@ -0,0 +1,171 @@
+iVBORw0KGgoAAAANSUhEUgAAAlgAAACqCAMAAABGfcHVAAAAAXNSR0IArs4c6QAAAwBQTFRFAAIA
+CAICAAQVEQEBAgsAJgECAAogAwsTAQopHQYBNAEAAAxNARQAERIQAhoDABwAABZEHRQKGRYKQw0F
+ACMBACUAERwpHR4cVRAFBR5rZhADACR2JiIhBDAGAiWGgQ4AcxQABDYACSeQMSYlJykmESxYlQ4A
+PSYZIS05OSsJHS5JOC8kAEMDUC8SADXLNDUzADbEAEsAADX/2RABCFIAAD/qxB0AAD//BFgAK0Vp
+WT4r3hwA3RsTRERAAEf/5CIA2iYCCUv+WUgz7iIAOk5g3CgVSU5SiD8uB2sABm8AE1X/U1RQOFyL
+4jkfIlz/RV98M1j+G2H/fVk23jtD4T0pXl9ieFtGcV894UIiYWJfAIwA50gOV2p+4kssO2j+dGZx
+bG1qVmj/OHH/aHJzfnBX5lQ7B50AZnahdXd0AKUG5V1ARnz/6mErCqgAAKsAent46GBIW4GhAK0A
+AK8B42FtALIOin9/ALUAiIOBALkAVIf/6WxWg4eBi4SKJrEAmoVtdY2geoP/rYVXhoyOqYVuJbUh
+IrgWX5D/jo6J7nszP7gAsI9S63xnN70zZqO/fZzCOb4+cZr+64dy8otYnJ6b7ImDRcM56IqcWMEo
+oJb/N8ZoTMRL7Y9/QchcsaOTo6eohaj/7ZqKXspXj6v9xal+oK+7d7vTUM+Afco5r7CumLTVStKV
+bs9ukbb/9qx/9q9l8queoLv/e9R66beG7rDImNRhi9aDwsPAs8bWzcK2cd67jtqP5MWUodyB8b+1
+tMr/z8L/j9+kbOXWnN2ZstD7yc7Rzs7Ly9xb183UwdD/+si/qeOmvuKIx9fj4tPCtuWiqOrL+tS2
+y9v++NPK2dvZt+m0ueq80+Wo3OeSwuy/yezG+d7f/eS/z/DS3uf/6Ono4PC71O39xPb02vPZ/+nR
++Ori6e399+vt+PGz+ur65fL55/Xb4vbh7ffX/PPY8vP9+vLy6Pf36fjr/PfM8vjr//f+/vn48P36
+9vv+/vzf+fv4/fvu//z7+v7//P/7/v/8//QpxAAAAAFiS0dEAIgFHUgAAAAJcEhZcwAAFY8AABWW
+AQ2TT8cAAAAHdElNRQfaCRQXGSltwbPRAAAgAElEQVR42u2dDXwU1bXAZwEJtEaNH1nbh68fpoWK
+iE1ao2Bgo9RqIrEg+BIFmqLYLOlMcHHlU6DiQmrJM2jKo0QIBHgUjD5ETcQIlKq0gKDmA+UjiRAT
+BCOBkGzC5re/++6987Ezszszdzc7s9jfPa2wO+zMPefc/5575t67Z5hB/0Ek/W668xckcmVmQZ5S
+CvLmgshl4QCiZu+8ntCOgWlzVfrl5ZZFrl6T/VYSv9x5K3Pj9wnkh9fFFxQE6VcVqXY+8PjgH5K0
++/0bBxDaYcsN0i+vLlTbzH9kjEknkEF3zptjLPPmXL2VwGC/nxysm+YRyc+/S2bHNYUgmtJkf5RI
+vScH3HEvifz05mhqB8G68d6xJO3ecSWhHXYfYdvM99LHGEv6mEF3zmFJ5Gr49e9qVUh7O/wP/w/9
+gf4EXnKwbpjNGQs779bvktlxzULg7TCQzvDAItBvzqMD7hjrMJaxPx0Cv3OdBvqFBRZJs46xCCwi
+O+xNwNfSclom6F2L4j1A/UsG1hgI1jyWUzLEKf/gX0CwevIzsvSlJoyh8IY5LmPhEFhEhsCI9b7L
+oy/uI2GBRaDfPATWaGO596dDADhioJ+7PKyI5SBoF4NFZAcEa6ZjvL7MOg9MAWtPxv4aHdlfM315
+TMHy7Gg4pifN5cUxBMsPisub9dRrqHc1xBCsC7vHH6jVlQOO3eGBhccc9B+rGIWkP/ALBNYEA3uX
+xxasooMGbVaWxhSs0kr9Njs8zbEE60C2UbOTTAOrR6/ZHjB/ZWzBet+gzR0xBmuHfpttsQbLIEP2
+ZpsGVrsBWMspWBQsGrEoWFEAK1UUDbBkQEkJu+Ko+WDxDRmApWmH+WCF0u/bCFYIMyIHK30CL1kZ
+Y1J17wo51snhW1/4d9BdoZlgcZx7mcezzM1yemBp22E2WBzL66fsExVYjmxBxsNed1gHVra8XX2w
+WBc2A/4dDbCSp4v/2PrGb1L1hkKnZ8sRNFH39cel6K1lQyFbvLcZXf3YrmWsNlg6dpgMFltc3dAN
+j3+zazWrCVbKBun8ltcfS3FYBpb0D721L+uCxXoqxO5VfEMiBmsa6BL/+UxWqhZYMFytPSVd5yMU
+qKxJ3jlub7f4D5f+xmqDpW2HuWCxr0r69b7N6oAV6JsTj6VYBpaciP9L0QaLVXQv13ewUqeBdjyS
+ZM0/Cf6uBRbkak03uLSraBHnWfsJAJ/LEi2TIxZs7bPyZS6XZwu0XEaWCiwdO0wFi3sXgC/K4QDi
+qfhEoV8QWNtT8FLK+L90gddHWwjWjNGw1dG/mgW7/jFNsFjYvd/sKnK73Kh7P4oSWHw3JOcDkJGq
+BVbxBfD5IidKqpzOV/3gb05rwGJfRXEAfYM41nMKfMXpgaVhh5lgsVsAeJvj9YOMXVrE6YAlvHwa
+XJSFLJPBOg8m8W2lpLwFQ5YjNFgc6t45OFCx0OVgNRu1iIVEByznu+ArIUixnPMfKGRZARaCSRpf
+ENx/4wwiVgg7TASLc52CA4f4BiobCFmaYDlSusBUC8GaGgC6VgssFnavS3QtC7uXiyJYMP09o5m8
+O2GfOsW8il1TudoisF4FX8hGvy3lc1yGYAXZYSZYa+RBitvy9hyXIVij744RWP+jDRb8ygaCFLdm
+x7KoJO/tyWj2Jz3/JPhjssY8lnNL91cvsNL8KOtk1fNY5iTv3D/AP2UJMaubvGvZYSJY8Jv+T04+
+8eAyBCsFdvBXVg6F2UK7k85oDoUs7N5FsiwjSsk7v5cKkqHsD3nEcm4BnznxHINTENaaCVJpcBGn
+zXQilpYdZoL1iThSB+kXBNbu8VOhzFhwAICXrUzeF2RPnTpp6qy/nAG9YzWSd5gpfqZhRl/AkpjY
+P0HrrtBZDQ468ZuKHVgqXdYk793Ag4zkllXyDZfq5FhadpgJVjMoxZ3g3sHrV84ZzmMB8LpjdCym
+G3r/oDXdwFaD97EZHG9FxQ53VHKsadOh5K8/q51jYbDwC/FSiywFixX7/Sirk2Np2GEmWA2gHOvn
+Efe3aCfvXiTA27J9lpVLOl7cLvyH2g2PaU6QSmCx4mXcXDTASkaSmpxxEvw1VXsofBLPt79/9AgU
+2DJr5VDIFh2rh9IM6vXA0rDDgqGQW4b1awAN+neFvzoDvpTPjlqVvD8Nw+ToFG2wxKGQO3gUmnEk
+GmAlS/M/Y5KXg5pkLbD45F3IsdhgsExO3vHS5JMV2mDp2GFJ8o71KzYCK+VhSJYjxXKw4A0DeF0P
+LDF5xxOVXLQiltg384PAktaanxSmG+D9AkrtEFhWLEKzr4Jv+FsUNOizO/QjloYd5k439C6SVIID
+doPRPNbTXeA96yPW6JS3AFCkWMrpBg/qXmmYcEcbLO2IxTrfBRdfcAqYOZ1WDYVozvGf0s2vkxAs
+6yIWGqs/l9ZsnWtBsxFYKHa8bOEitDiPBQfhc49prhWyqHuliWhX1HIsvI1JL8eCMJ0CF1ezeBxk
+iz+xLMdCSyYfzRZugbd0gCO6OVZoO0xd0lnTDT57QdiktqYDtBnOvMPYcc7CRWhpghSmWW9qgoVW
+EC6u5uMGh7s3KmBNQzJ9+UnQpTnzzjmLTwHwRUVxcemWBnjnusuqRWi0ctX5cXlR8dq9HQB8s1pv
+SUfDDlMjFkxPQO/H5auKy/e2of0XhmuFKQ93gTctHwpHO1ColA+GqkVovntXFQndG5WZd0m6fqe9
+bYZzej6RPvjZ6qAJUtP2vLNrpP0c53bNYXVm3rXsMHnbzFrJL727XtCbIA0srYA/pVg33SAu6dx9
+BpyQ3Teot80oujc6E6TtWBpr1mfobPRDUrzlSEfH10d3FcEbBws3+rnX7m3o6Pjm43K9jX46dpi8
+0Y9zFe891tHZ/HHFMo5zEawV/uo4+HKsVWCdli1C+2F2p7nRj+OK+O7dUeRio7vnPdVoazIr3/Ru
+4dZkce2bI9vznmr51mRh2wd72e95T9HdmhzKDEt+paP4MQX9+Rf9lU60wKI//6JgUbAoWJczWMRF
+QehQSMEyJWJNM7B3eYwj1re8KEhnjMGaZNSsaUVB0tcrZaPqbVaMyxiVVlcqRP22KLZljEqLlApV
+q97uiG0ZowOOVzboyitmlTECK6fly2V6fr7qfXtMwTpaVKyUUtX74uYYggVAs1o9lX5F1SCGYDWB
+l2bMVMos5dsZL4HwwTIQFwYrmmICWNEUM8CKnpgDFpmEAVZQM263+shsl1ZxWz/6H/oD/ukPC6x5
+s42L6s4mrEFqClgkRX8hWPeONRYzwBpN0i4Ci8iOkGB5Q7xjbP2CZGDwoX62K29Qy/U33RB8bEDS
+SLUkpfUlYjE3EMmVIewIJTZ7sH4FfQHrqhuuV8tNQUduuJrpTyQ228hg/UoiByuXsN3+A64OtiPE
+kauYEP0bslw4c9MD9xPIA9d/5wc/JJH+uWUlaunL6Di3P1GzPxhMaMfV920N0q8qcvVO27/34/80
+lh9/b8D9D5DIz+3B7ivZFzlYv73+AaKG7x9AaEd8YbB+IUdH5hdkddR/9H2iOuX3XrE1ujnW3O+Q
+tXsdqR3PRnko/GUGQXX5jNsYjki9B5JIWvWSg3UrmVtY5jYSO9J/SV7n/efzOJKsDYI1mkSugOGp
+7ai+HAsLrLEE2afj3uvI7JhzEwTrgJGEA9ZtRPXlbx/wJMlNCA/WfgNpB/4wwCJyy5PM7UQ56u0w
+x2o7YtC/bSaB1eZx6xcqd9XHFKyXpLpnGuLYQBwTog+WF7wmlo3TkIzp7SB2YJ027F63p80csOoX
+dXR3aksHKC2PKVjZG8BpPQEvzYgpWPkrhd1koaWnJqMmhmCdqXd3dOpJd4e73hywjngM7C2viClY
+M7YbtPnKrFiDpSutWY0xBcuoe4HHNLC6KVgmgtUYa7AM8ncfBYuCRcGiYH3rwRJ+UKYLVookVoLl
+0Gw3FFgh7TAZrNRkQVKNwVKXCLIIrNBuUYKlZUZfwOJYd3FpeemqZawOWI4VCwSZ6bAyYk0V2501
+VVnzIBgsDTvMBSt1+vL5WPKVtZNCgMW6iqB6pcs41lKwtNyiACt1gmjGNHWZ/IjBYj17+T0jX+9a
+xGqCNT5wlZbXrQMrJUBEb+0f5D9NDwJLyw5zwUreLx4/80Z6qg5YrGvLMeykznplPXiTwZLc8o3K
+LQqwkqX9cl5VdbGIwWLXXIDGNjc0dwBwSfFLRWXEAoB/NN3xLgBetw6sDeC00C5UT/5LXjVYmnaY
+DNYe0IoeydgIe75GBywO/SC0t62hARXpV5S7NhcsdouWW9RgdfFm+EGXskx+hGCxW/yoTjnHch6o
+wsUXdMDi053Rk94CQFFewmSwtgsp1oIz4M2xmmBp22E6WCtxapK+shv8MVUTLM8p0LurCFVRXauq
+B28qWKj2hcwti3TAqklORRlWvrpMfoRgeU6Cz4VfvqLyDB+x2mA5UCV62OV3v6V8xoHpYOHC+6ic
+9CUZ0CqwtO0wHaz1yWPSUfb7GngjWQss9l0UL4QSVKgevEVgofrtvFtw9Y1drA5YqenIjuT5UqGx
+voCFCnzPFltzvgo+l1XADwZL6Oy/SHUIrAFLfH0azNACS8cOK8DCr1aCPVpgscXdgSjFek71yoqH
+mAkWrt+u4ZbgiKWuYNcXsIrlNe9dntJlLpcxWG8pC+JYBdbDivroSrB07LAALFw9acwH2kMh7ODP
+ZflN6arZ1kQsPbeEAAvbsTIaQyG79pQ8HXEpCnyHzrFSUHGJP8Ugx4Ij8InHNHIsPTtMB2vjmIyM
+jKzpe5QdohwK/6GsB29R8q7rliCwxmRBM6at7z7zm2iABb7RLPCtBmsFlld2A/CplXeFtQtwuxvO
+AHmxFDVY2naYDpbU+2O0wTolPPmBcwbVgzcVLB23aEw3gK7fJfd9uoEtB8f4Osw7ULnc+vpjHlYL
+rIDjP1UW/jUZrIC8PFoTLB07LAML7E/XBMsnlBUv4tU7uoO1BKwK0S2VQrsezhAs0Pi71KiB5XaK
+v6srZnXnsbygd/tMVWFnk8FqOYAnsb58KVt75l3PDvNzrFS0E3nCym7FWKgEqxsUadSrNxUsyS1t
+wW4JcVcIBT2VrysKEWut/yIfossr0SMJOsEqVjfHelo9O2pRjvUW+FJZ9Fc9FGrbYdFdYWry/G4g
+G0XUQyFOojkPUq/iiKxIr7lDodotRazBXWFqctZJ8NfkKCTvwnQsXw65Qw8sNI/FFwxPsRYs9BzH
+46D3MZ2IpWOHVdMNY1JrwHwNsHTq1ZsJFgfd8oLCLYZgwZfrFfNxkc5jfSKfS2QNwBIKhv/J4oiF
+XkxCFTS1F6F17LAMrGRtsFhUDz6g7A6LwFK5hbMQLG4NWl/gxJKMHXo5Ft+vdx9XFQy3BCx+ENZe
+hNaxwyqwUtNPakcszyk0A87x6jmrZWXFzQULAh1wC8z0VhmClZr6RjTAQlN34O1l+HET7jUNQIa0
+BlgpDwNFOWmrJkhhqOzVWYTWtsOatcLk5DGvgTOy/Q2qJZ21F8AXq92ouoq7aK8ffMxatFao7ZZg
+sPj9WMv9QHFbGCFYnAs23ftxZcWOgx3oOezGM+9BT8+waOYdDoafai9Ca9thOlh7lq+Esr4GKJJe
+1SI03nzxBVSvGpW9/uwFa5Z0VG659LbOPFYjNmPlHgD+nhyV/VicVEi996NlrM5+LLG3YQ9flG+6
+Mxms3YFnGsufIBm0H0vLDqv2YwGwUXc/VvFe8XNflLo4y/ZjabpFcx5rf3qUdpCyruLqg0cOVpe7
+We2Nfo7aA9Ja4YLa2plWgbXi+EvSIvT22t1jdXaQathhMljra/BPlfe8sVK5jSloBynLeir2HqlH
+5eBZ6/ZjSW6pVLtFCVa+YMaejdNTo73nnTXY8x76tfl73h2ybfcke97Z2Ox5Tybd887FZs87S7bn
+PWjTu9m/0nE4ZC8dlu15d2i1e9n8SkeonfFt/5VOuoYd9Odf9OdffQKL/q6QgkXBomBRsPoKlo+C
+9e8MllGzZoFV7+4EPm3pBqWxBSt7A/DqyWVQxqirpwv+H/6BRfybF9AY4zJGHt3u9YFOs8BqVlfi
+KlIXXjsYU7BWOCYpC61NUr6f5NhArJ4ZYK1Pn6astKZ6mzWtNYZgnf7aYyjNPFizSeowQ7DGkgiq
+QdpWf0QhR5Vv64+CcMAiaheBRWZHqFKRu1UCog7WbQOcROWucanID5RSs3+PUlrDKhVJ5BYnQ2iH
+vQl8repetdTj/ZXMreyTBML+6EbHHSRyRYmv6fQZlYDI5ZnvELU7+joyO5w3PXO+6YJKuiNXr8l+
++5hfGkv67cyjThI3329vamrqVYu61TCK2/6IzC2PwohFYAeMWB8Gd29IdZgBVwbJVVcFHxtgG0wk
+tiH2IBnZB7BKCNu9NpQdwYeuZOKD1IvP7QNYSf0GBsmg4EP9mBC6XB3iWLB69viIn3ngA8+GajeU
+MKR2BOtnD13nPbNuH4HUjcwl+ty+pMLgz9X1BayRZPpl9sGOPujXNKSs7kNjqSuzV5HoV1eYFOJo
+U+Rg5RK6pcreBztCTgIwhF/XtKVkn0siqfPeRe6bQsLHWuROJrRjIYimNNnJqKyznyf63NakaGrn
+Azk5ZJ/sIraDpM67VwCrcf1GXVnfDjtkLgANldX6gsAqA2C//vXWv0acJPBgvW/QbmUbADkQrI0b
+CewoAJ1GZlSHAxYcB+r1L1gJ7773oWfQbDd4HNsBASwD7SobwgLLf3yDgWzn7TDqXtGOAxsM7fBi
+sHqmTcifriP5WfkYrA6P+nlsKnFVYLBqMqZN15X0jWFFrGqXfrPFniIfAmtlhq4Zgh3PglJ3qbEd
+YYBVb6Sfqx53yAbHzBm64qiFYPlAhUtfvyJPWzhgeWdkz9JtdqZjA7TjX4bdy9txoXb8jBmGdmCw
+2rMMJtzemIDBanYbGFRZjMHak2VgbziP7oVgVRg98PSYuwOBZTRjzdvxLPAYPmG1OCywqosMPlRU
+jcFascDgc9m7MVhGj+7tcDeEA9bp8bUGH1uwAoH1tbuDxI4LB7KBsR08WBP2AP6Rb/5QAjtkGg+W
+0SNj0bOUk/hnQoe8EN9GTwRg6Q/sxzydAlh+YzuejfIzoavA+0ZgreLBemmBfgrgJQQrnGdCQ7DO
+Zx8wSIh4sNoMA+EqASyyZ0IjsPYbfNPDBSuKT7EnilgSWAR2ULAoWBQsChYFi4JFwaJgfVvBajcA
+azkFi4JFIxYFi4JFwaJgUbAoWBQsChZN3ilYNGJRsChYFCwKVphg5RCCVUAG1pCS6A6Fc0eSgNUB
+cu4jBKsgumDFE4IVTwZWmT3KYGWC00RgxROCFU8MViEZWLklZGDlVEU3YpXlkkWswgIysKAdUQUr
+s44IrLpMMrCqMkFUwVo4lzBiZf7raxKw6jK7ScECRGChaxGBBSWqYEEhAgsKCVjQDm80wUJCAhYS
+ErCQRA8sLERg4e5tI7Jjd1TBQjuiiMDygegOhfCCZGD1kEUsnzeqEQvZSwSWjxAsX5TB8hGC5SME
+yxdtsC77iOUnAwsKjViXU8QKC6xoRiwKFgWLRiwKFgWLgkXBomBRsChYFCwKFgWL3hVSsChYNGJR
+sChYFCwKFgWLgkXBomBhsGoIwTIoR1IpgmWg4PIwk/dygw80IMUgWOsJwTKsNhNlsIolsPRlkgBW
+pf7HOsIFy6jazIoVRN0r2LHbsNrMJBGsjNcaa3SkcT1fl6jBVd/coCNtFXz5nz0ZNcrrqa7emB8m
+WMVtDbrtHnR1oC9e/nxdMyQ7PJUG16soDku/ao+uWxqaPTwpK2Ycr9WV8TxYxeW6+jUfcTWEo97p
+8dv12z0+cwXfvUeI7Ng9vraWwA4IFliZkaWQaRMUbydk8KHAV+7WL+8t1G9vn66+nvJtFnEBfGGk
+W2RQVhwXSvNDoLN0RbSj0uUhsoNUDOvaCxGmdrxKpirfOma04M/VG+jnLveFpd8Kh7Kd7Gy1IgeI
+ulewo2WG6nrjs0PZwaCa4Y2tja2tjY3wL/g3fo3+j9/gF9LorpQO1Xt+jPaDdnxuo3AJ8bKyNkjr
+lIuxv81AhM81tirsaNWyo43wepHqp37fKeQyLcdb9OT4eSEHazO4XpjqAf1moVZ8uz4jt3TyZpw3
+uh62gyFSzQ8uf/H/m9jxbyIMdQEVChYVChYVChYVKhQsKhQsKhQsKlQoWFQoWFQoWCD0g0V8fvUL
+2SdDbKDwmqqu1xtQQd1SqCNBp/WYrKDkpR5/kEt9BKf5zFscUDTfE/zSq+llXwTdq4hYWwvmIlla
+8o786M6SwmeXbj6ruOjhrYVzl5YdEo41FSycK5z5odnfhJadJagZ6XG7hULLSBm0ZFNXoDgiSi86
+benmdtO/qYGGsGuqeJfOXbi0rJVfUtonOHnp5h6VlxeqvRxlrsokXTa3KjpzHWq6Sd408vKzopel
+M5eWHIpsKExjBIkfd1LEc93wBHxo2JRuiebD9wyxoWOJ4w7hz9QxktinmNp3LYtvxi3HD1si+EFs
+2JY4hf9yyHXhu9ILehcPF0/zmxey4IV7BXfFDVvSjRvKlanzIj5SKB0Y9g7Q8rIpYKUxoZremZYg
+eOuk6JqAlzerzhTACBesTGZkDpTJsKlbeANbHoH43Dc5J3M4w9wiXvP5BCYOHUuzMQO3ocel1jHx
+OVgyYf89ZOJ37vBQ6JP7YDsJjO0hXsN4JlNs+SkcIhi7qAsDj3Sh074cJZ3G3GVaz6H9C7Ahu+Cu
+u86iYwVMkqBOAtNvG3JNCX9kMjww6JD8tEzey2dN857QvTk5sH8HviN00xM2Ji5tMvZfIj7mlbyc
+hrzs589ME8Eg9Z8KrBL+xbqh/V7EcX0iE7fkEPrWt6yTrvmcjZnyYQ+Ol6OYQTU4YsVLEaV/3Aem
+9dyXI5jEzdjxdYttzO9xOLIzTfwQ9Hx/rEsVIz7bvOURW2KNeNqSJv60BHiaecPgKNjQId4PCcyD
+PFjis5EPj7Jh1kqYTOHACPgRv+RlIHj5Qb95YJWIugy1Pci/eo6JEzpz3XAhdEB3DdvcJHr5KcWZ
+6wbzYIQNlvjA9CeY3yKbN6GQJMh7gxkcGE8k2J4Sj50bxUzhwRLzu97/Mq/n4LWlqAnxjsOv7cw+
+4V+HM1sxWElisnnpZ7YXkRXPMbdIucEm4bToC24oUcpON/W3HVKABb66FkeoEiYNKojo2cQMA7yX
+A6dBL79jHliFUjPMNThlec8WJ4FyYiizJNjLiScVSCIwIgfLDxZiPHqHMjI+JyIdusAjzDi/6Enw
+pu2hs3Kw/HJPRrvjDg+OCzj93IjEDySwvH6o2HDbZgVYXYI9h69gtgXgHJG4zaxtWS3XMbJrTxy4
+TeUO/jvAg4XzdeYWrNJ1zIuB9GFi3IsWgNXL2M6jUW8UzFykf3+OeQpqj73slcYI6OUAWH6QRxo3
+QkescyP6ob54b8A1rYF/PXcIJiz+iz/jUwW+oUsfnvdaFrH+zPwk0AG9hw95gWwohN91/EWTR6x7
+bEuE0wLSiawwR95kftKtcpccrBPX9jskHwrBRD4rhNHjrPo08yPWoPNYpUEBiADsTOyuu4CkQm8n
+9LIsYn05ot8HEYGVu68KyrpRcLSDt3+/tj0l3HBCEW6Ot18x7JR0DM+6+GU5Vi/MsfaY1XG/Zv4X
+KNThc6wSrPPihMRtQJFj9T5iG/gBPu2/g08zI3VXNCT0TagcKw0rvPUe20N4UgJ62a/2sgU5Fmpz
+Q/9xFwKdqeVldGYeD8bQuCWE92YqsEQZ181rsjTohHXMfUGXhmAVYMk19a5wKBNiGiU+XtSZn26o
+YobMRark5eK7Qi867R1ggfjguLI56GgBM5JXJwfeSgt3haLGiYcwj6G8bBJYabwu8IZ0IJ4oeoZ5
+POj7EexlnwqMSMCyJyEZYkP5G5q+4BH3jeQlTYjkXlxCPAkfS6rDYEkTHQ+1muYaO1OHo03VEL7l
+PB6sJEFnfGsMwZJ0ieMjwRCmisdfUDgH+MzpuJH47gGAJqGhTHisIDB3lMinEBAsXuEEG8zZ/TIv
+JwW8bBJY4pyfeLeQJ8bTNEFlH/DFq7xcgM+UgxF5jtWybiiDponE75JPpAb75T4erCTh4D4MVi6U
+oTbhZtskuVn4LolzoJkibcJEBx6Jqhg7VCUnIT5xyVnxtHeEWMZLmllgpQkRS5wvTsJgjczLzc0c
+HD9MnPUXcyzv4XuYRMXXV+ZlsyIWdE1mf2bcZiHuSBFLRA7mqwlBXg4Moi3rbmYe8kcOFkzuEq75
+AA23S7AGvq1QqgqZIfD17sHj+ByrCh3cahfAQkc+HYxaNW+x60Zh9G/C6uSIYO0Tb/ZtP+mRcqxN
+trglqtSMPy3XLLACORbvLogUBiuXny5KFO9MA3eFJ0b0ezHotELIo6k5Vu9E5hYxY39ezLFwZ5bF
+I7DUXs5RpP0QjJo+gNUDhjNl6DZHfldYh8E68bNB2xTD077AXeGmBHT3ahpZf2YelC2eFirAQvdT
+TL/zgbvC51CGhXVR3hVuNQss3JDM9io5WLA3+21TgyVMCilvJveZCVYh8si5UWjePYBJICXGEes5
+6OUumZdz5Gm/X5gtjBSsLhif4fmXZPNYfvAhAgvNYz0kW65UgAWet9leNAsrPzjcP64m8G6pGqxe
+xtYjm26YaBO6Ep4mZu9ePygzD6xzV0jzWLChrXKwwLkRaNxTgCVOcp2TzbMhL5sLFpozGMrccoEP
+sqOYpwJN92CwdvZPVHhZAVaXlEhGOBQKcUk+lQzvB6/FlPfv91RgkeVaOVj+XvhlOGkWWTiIB67+
+hHoofNP23XYZWOew+/zq0xabB5Ziih+6Sw4WzhOE5F1U4NJE2+9BsJeHmD6Ptckm8iRfWgGH8awp
+dNddSi+LYHl5MPZHApYAZssjDB58YSOJwlrhzidsaAUCyNYKfXWLb7bZ6gJgecGJwba7zNs+EFjF
+atl5j42ZrJggPTwUeyswQWjMGXEAAAJqSURBVPpef366gV8rPCuddp9pYPGLkry7HrEx4+RgoTUo
+YbohU5zzs/FBLMjLfpPBgtFcXISeKK4Vnt+3OMEWh159qvTy44oJ0ntIJxxUYKUVoNu7nOEMjs5e
+YXcDOmJjmHHC1/F5G9rdkItWv6EKfsXM+3MMs80srsR1d3hnAxWMm9LKg5WTh3TOTGDUM++PMGgM
+9PrA4VH8adiKKa3m6Ye2UUjuwhMvAbBganNLK45YSdjJuXg/hh97+Z4QXjYTLDgY3iXQ/QQT6Mxx
+7wS8PFn08ln+fhI7OedmJo5wUjD0fixmmLRss244nhey2ccJW3jwfqwEfr/OyCU9wv21CNalEcwg
+8wZDaacQY59yiE/NmcBWITznt5Wxi2DBACJsQhH3Y/GnmSi968SGkLu8aD9WjrSM0h9veAjsx7Lz
+82z8Nq74wGlmgZXGzBW/AZsYKbkS92PF4xiBs4qWxUPkXvaFBCMcsEpy87Aod1ruLJlbwG/HlO0w
+hMcKln4oZDdNuXmBT+dONm8XKcqYdhbCljdLq2sFvMoFS/mOBHU5c6UAsi53ssiR+jTzBDaUt7Ss
+SbwJzSmTdH8+93GYX1TlCE4uUygDvZyn9nKUwSrJqZLePZO7tNsrtHUYdTDuTG9IL/tkYBAvORnu
+eff6Zb0qSo/OcADM3Pfu1VHWq3fAr2djlNlXudQXdCTYjV4L6uCodfEG97RwSL7nXa2zPwKwqFCJ
+mlCwqFCwqFCwqFCwqFChYFGhYFGhYFGhQsGiQsGiQsGiQoWCRYWCRYWCRYUKBYsKBYsKBYsKFQoW
+FQoWFQoWFSoULCqXq/w/gbudjI6bMwYAAAAASUVORK5CYII=

linux-imx/Documentation/DocBook/media/constraints.png.b64

diff --git a/linux-imx/Documentation/DocBook/media/constraints.png.b64 b/linux-imx/Documentation/DocBook/media/constraints.png.b64
new file mode 100644
index 0000000..125b4a9
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/constraints.png.b64
@@ -0,0 +1,59 @@
+iVBORw0KGgoAAAANSUhEUgAAAlQAAAFYCAYAAACVsmLPAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBIAKVtZsMAAAAxxSURBVHja
+7d3ZbqvIAkDRLsv//8v0QytXvpYZap7Wko56OAnE2AXbBSbhOI7jHwAAkr1sAgAAQQUAIKgAAAQV
+AICgAgBAUAEACCoAAEEFACCoAAAQVAAAzb2jvyMEWw0AmFvh37xnhgoAQFABAPT1zvruwtNlAADV
+VLxsyQwVAICgAgAQVAAAggoAQFABACCoYEohuFkugKACsmLq178DIKiAyJgSVQCCCigQU6IKQFAB
+BWJKVAEIKqBgKIkqAEEFFAgkUQUgqIACYSSqAAQViKkwxjIAEFSwbUyJKgBBBWJq8GUCIKhgm5gS
+VQCCCsSUqAIQVMBYoSOqAAQVLOk41lwXAIIKhoqqJyFUYhkACCpYMqpiQqjEMgAQVLBUVKWEUIll
+ACCoYImoygmhEssAQFDBElHVexkACCoAAEEFACCoAAAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQA
+AIIKAABBBQAgqAAABBUAgKACAOA/b5sAGjsO2wBgMWaoAAAEFQCAoAIAEFQAADtzUXohIQQbAYDi
+Dh9kmYIZKgAAQQUAIKgAAAQVAICgAgAgmU/5VeSTGQDE8InxeZmhAgAQVAAAggoAQFABAAgqAAAE
+FQCAoAIAEFQAAHtyY0/o4O7efe4JCzAXM1QAAIIKAEBQAQAIKgAAQQUAgKACABBUAACCCgBAUAEA
+IKgAAAQVAICgAgAQVAAACCoAAEEFACCoAAAEFVBICGMsAwBBBVPHVE4QlVgGAIIKpo6ps/9utQwA
+BBUsEVMpQVRiGQAIKlgqpmKCqMQyABBUsGRMzbouAAQVNHMca64LAEEFy0WVmAIQVCCqxBSAoAL6
+hI+YAhBUIKrEFICgAvqEkJgCEFQgqo4+3wuAoILto0pMAQgqICOQxBSAoAIyQklMAQgqICOYxBSA
+oAIyokpMAQgqICOqxBTAvN42AYwTVQDMyQwVAICgAgAQVAAAggoAQFABAJDMp/y4FIJtwJx8ehJo
+yQwVAICgAgDoyyk/HnMKhdE5RQ30YoYKAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQV
+AICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIKAEBQAQAIKgAA
+BBUAgKACABBUAACCCgAAQQUAIKgAAAQVAICgAgBAUAEACCoAAEEFACCoAAAQVAAAggoAQFABAAgq
+AACGCKoQPAs2JQAIquwCUAI2JQAIqowCOPtvbEoAEFQRBaAEbEoAEFQFCkAJ2JQAIKgKFIASsClh
+szEKrDGoXkNuiOPwwim4iezYoc9+39iDfQbVq+mGEFOiCjZ7E23swR6D6tV8Q4gpUQWb7PeNPdhn
+UL26bAgxJapgk/2+sQd7DKr3EDE1y96mUPT1fqgh6Ffosbsz9mDdQfXquiEY/rUKlBtLYgoqDJZB
+Dmjlg8qRWlSBMSSmYLOoKhtUjtCiCowdMQUbRtXLswUgpkBU5XkXf9CmPJZ9nQJrft6Gife9XmC/
+t0mHg9tr3FcJYgrmjilgn8Fa55SfI7WYAvtnYKNBW+8+VLGn/zY6wtd4qDY1iCngx+BtdNCre1G6
+W3gPt7MXUwAwW1CJKjEFCzB2wODtH1SiSkyB/TKw+KB9DfnARJWYAvtnYKLB+m7+AJ+UgL2WTQmT
+jz1jEJVf0ASD7jXck2/vY1PCQscwE+6wfkz1CaqrB6wAbEoQVcBkMdUvqH49cAVgU4KoAiaMqb5B
+9bkBFIBNCaIKmDSm+geVArApYaOxZ4zCuoPq5VkDqL//F1Ow9qASVACV9/9iCtYfVIIKoOL+X0zB
+HoNKUAFU2v+LKdhnUAkqgAZvqoG1B5WgAgAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQAAIIKAABB
+BQAgqAAABBUAgKACAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQVAICgAgAY3NsmIEYI
+//3zONK/7u/v/nx+zdPl/1rO0++LWd6vZZ59Xe7jSfnZSq3z6jnJ2ValX09PHj9AD2aoiPJ34Lo6
+wJWKiJQD7N2BN/WAzbNtZTsCuzJDRZeD8XHkH3zPZo5CSJudeTKbdrX+lkE7QkzFbq8VHj/AGTNU
+dDkY1ziw1jjY7nAA/wzKqxnIu5gSPICggoTIuDroXh1YRz3ohuCUlcgESOOUH81iZdR1fJ9+zL1Q
+use1Y6nrvLsearR46rHNAQQVw6l14HtyOurJz5USVqs9LynXt8V+ShBAUMHHQfdzFuMsQGqHSW5M
+PQmrVtdsjRCkOwY5gKBiGne3Okg5WJaMqbuw2uX5+P6aX4H8/f922F4AgorlgyD3hp47z3ycPfZf
+p/FSb00BIKjg4kD8/cm4mFNjKfd/OpsJyb2GJ+V+UzEXSK9wAfuvqGr9s7ooHRiV2yYgDCe8xUOp
+gHny2GNjVdwAOzJDRbUYSfnep8srfdCOWV6tr225ztzt3PpxiTRgdGaoAAAEFQBAX075sbS7C6dH
+OJU0w8/ocQEIKjY2w0F71bAQTMBOnPIDABBUAAB9OeXHY36tCAD8ZoYKAEBQAQD05ZQfl3xSCwDu
+maECABBUAACCCgBAUAEACCqgiRDczwtAUAFZMfXr3wEQVEBkTIkqAEEFFIgpUQUgqIACMSWqAAQV
+UDCURBWAoAIKBJKoAhBUQIEwElUAggrEVBhjGQAIKtg2pkQVgKACMTX4MgEQVLBNTIkqAEEFYkpU
+AQgqYKzQEVUAggqWdBxrrgsAQQVDRdWTECqxDAAEFSwZVTEhVGIZAAgqWCqqUkKoxDIAEFSwRFTl
+hFCJZQAgqGCJqOq9DAAEFQCAoAIAEFQAAAgqAABBBQAwibdNAECqcPKLJo8fH1cNN7+U8up7jpOP
+v6as//PvPr+/xPpTlsEazFABUDSmnsRTie/pvX74ZIYKgKz4+J55+fu7EMLPWZmU2auY9YsjejBD
+BUDRmDk7pdZq/Vf/P2bZT7/2OI7/rU/ICSoAiHIVLS2uFyq5Dtc3kcspPwCairmQvHUghhBOT1U+
+eQx/fyfQBBUALBNrtcPmc/l/QYagAoDqYi9ib/2zPZ2l+hVw7Ms1VAAkKXXbgpIXkH9eIF7r8T15
+bEJLUAHA4wD6FQ5PPoVXc/0ll3/3db/+sCen/ABIio7PU3U5YfIdY0++78n6RzPqxfiUYYYKqh94
+rv/AzFGV8nelouLue3JC5e5XzTx57E777SUcsa+4zxeIo8HlOw/vOgBwLBlqA1drGDNUAACCCgBA
+UAEATM2n/CpyQSIA7MEMFQCAoAIAEFQAAIIKAGBnLkovxI3XAGBfZqgAAAQVAEBfTvlBbXf3I3O6
+GGB6ZqgAAAQVAICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIK
+AEBQAQAIKiBFCGMsAwBBBVPHVE4QlVgGAM29bQIoGFOf/30c7ZcBrV/zd6/Rq6/7fs1/fs3T5Z+9
+AckZO2dvaL6XeffGJ/XxpPxspdZ59ZzkbKve278BM1RQOqaeDvbSy4CW/g5WV6/RUhHRcuwYc2W2
+VY3tP/hzY4YKar5bfLIDeLIMM1WsOnaOI/9AeTZzETt2YmbTrtbfMmhH2PfFbq/Syxxk/2iGCmrF
+1Kzrgplez78OpjUOsDu8qfkMyqsZyLvwSdleNZYpqGASLQe3GSpGHgNXB92r1+6or+sQvInptV+a
+eF/nlB/kDv7aO14xxUpahErqOr7Hc+yF9y3Hbul13l27NPJ+aJBTgYIKRo4qMcXK46b2wTVlHb9m
+3VpcXD/i85Kyb4v9lGCvZQoq2CiqxBQzvfY/ZzHOAqR2mOTG1JOwanXN1ghBunucR3INFYw4qMUU
+K/sLsO9rlXKuXSoZU99jcfXxmPpp5LP7f5W+B9Ukz4GggtGiSkxBn5ja/UL0v3D5/nO1jyq1zWos
+szGn/KDGTinnoliY9TV/FzZnr++U+z+dfcIw93qblPtNxVwUvcIF7N/7uZJRlbLMQS5KN0MFtQ4w
+YgrWGberjs+Y21vExmqN/eDAz0M4jsifrtZ5alh5ZyWmAMbaJxfe75qhgl7veMUUwDIEFfSMKjEF
+sAQXpUOrqJrk5nSwpLvT7yOMxxl+Ro9LUMFQUSWmoP348zN6XIIK7FgAWDWo/DZuAAAXpQMACCoA
+gM7iT/m5BgQA4P+YoQIAEFQAAIIKAEBQAQAIKgAABBUAgKACABBUAAB7+hfHbDX87cMFJQAAAABJ
+RU5ErkJggg==

linux-imx/Documentation/DocBook/media/crop.gif.b64

diff --git a/linux-imx/Documentation/DocBook/media/crop.gif.b64 b/linux-imx/Documentation/DocBook/media/crop.gif.b64
new file mode 100644
index 0000000..11d936a
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/crop.gif.b64
@@ -0,0 +1,105 @@
+R0lGODlhuQJGAeMAAAAAAH9/fwCvAP8AANEA0dEAAK8Ar////wCOAAAA0QAA////////////////
+/////ywAAAAAuQJGAQAE/vDISau9OOvNu/9gKI5kaZ5oqq5s675wLM90bd94ru987//AoHBILBqP
+yKRyyWw6n9CodEqtWq/YrHbL7Xq/4LB4TC6bz+i0es1uu9/wuHxOr9vv+Lx+z+/7/4CBgoOEhYaH
+iImKi4yNjo+QkZKTlJWWl5iZmpucnZ6foKGio6SlpqeoqaqrrK2ur7CxsrO0tba3uLm6gQC9vr/A
+wcLDxMXGx8jJysvMzc7P0NHS09TV1tfYxbth2d3e3+DRAePk5ebn6Onl4ezt7u3q8fLqANtg7/j5
++s/z/f4B+wIKHAjsn8F09ex5IciwobuDEM1Bi0ixosWLGDNqrJhQIZdk/htDihxJsiTJiSZTqlzJ
+MmNHj1q+tRznsKbNmzhzDoz3EiYWmTN7+vQJgOfQmN5mAjzKtCg9pj+TBoU61ClCqlaAthSKVZdV
+dFy7NtHKMqxYW1/PmT2bhOzKtWxlpZUYF4pblXDrvpq7Tq+Tu+UGCB5MuLDhw4gTK17MuLHjx5Aj
+S55MubLly5gza95MmVxev0EAkxsg8jNoVXNJ0zy9RPQ41RtNsz6V2vPstlLTwdYo+zap2qt9G3Ed
+YLdL4bGAL0VOhLhxjL2Zf1IeXboM56Wtt6KuPXRudM8vVu+eiTt5H9hDjj9vyfyIXrTW80gfO4OC
++/jz69/Pv7///wAG/ijggAQWaOCBCCao4IIMNujggRe4J4IwBxBg4YUYZqjhhhx26OGHIIYo4ogk
+loihMBbi1k084VlklgLsWQKjBRJqgIwEBJRyY4UqZsNidhjMGOMkQlLgnjERwkdBjuVpk2QFTB5B
+H2/2DUlJkRNYhWQKUTKyJQpdFjHlcUFaSaQxo9nGQph/fCkDm0OMCV2VZh7iZpbnwCYfBnDKcecO
+fXq3ojotckRnnXr8SQGWEtQIphuKEhEoEHKKdygHCUiQ6QEJdDrEphWA2oGo3UXaAaMHOHrCpFmY
+2gSr6H2XJ5AXoHqBp5xyuimpPfCa6we+6uWqCaiqagKsTAxrBbLz/slqTqEUvWgBqLviSqqvnXpq
+rbbZTpDtt9ziSsG3unKraabkltutWMq+UOyswa3A7A/tfjGvDpW6eKm3v+a667i38vvvuQLzW7Cm
+AJ878L/W9ouuR/Xi8O6zasorRMRo3JtDvoaWOe2v4IIc7LUIE4zwtd1Sm7C6KZ8MLsmzYBzExIFV
+rILGJsgcB843cBztvgqHWnKwup5s8rroVivwwEc3DHLR/jKcis5K0JxmvDezQLUePNvgc0TSBix0
+1OuG6nS56nob7ssqp132wuIi7cnWU1j9ms1chkD3IF3X8DVEYe9AtNi37M2F3cXh/WgFhjPSNw1/
+HxS4CS97MPjH/ts5uQfieqbQuCWPzxC5QZPncPnYoXz+BueKY+Bm6J3AHsPo/5TOmup5sB5vxLJv
+0vsLtPtjO1W4D0Kz6r9nknwLwfczvFeam6IAmndjnfcsy2vtbM3qAT2KkhkULwj4SRITIbzLWYx9
+j9j82L3HvyljivzeG1tC9qCzf4379cEPigACCAYAB0jAAhrwgAhMoAIXyMAGOvCBEIygAVMVDBLo
+Ln1ZWx8SmjeP521CAEYiXypAGML1XHBPF8BfJVToue1drX+1GgUJZTHDFJywBSycRA5PwEF5eFAT
+NYRFEE9wwzXRYoc5c2H1YGgBW32QFkMk1vkoZr3FyQKJJeih/lH894kotsKLFpwi9zB4vSvqzxr8
+oxIXPQHGVbRRBEVUnxk3qMTEvS+GonjjBBCwxwMg4I+d0CMI4pjBOUqpjtACm/c4IUhASuCPfPQj
+I1lAyDLGAosk0OJT1hhIC0RSkpDsoyg9GUpAhtKPp6QAJD9pB0F+oJJWvOQZq5FGMuExFFHkYyR1
+OUpWqrKPvHykJIXZyzy40gOwXNURZ0mNWs6Jk5P0JChXKUxHXsCXwQTlKIe5h2OeSowvRKEFMOkI
+ck4IkbRqogyvaU1uZpOd1URlNXepSnriwZscSOaxlknHQekmnRVwIhAxgM09rtKXBrXnKalJzFTe
+AZ8b0Of9/vh5SH+CB6CLWicPEAoIiGpAoiQwp+OYOQ1nWgqaT0TBQTl6TUN4tH7oEyeUKDocdN5R
+nXnsAUv98FJO2i+kNBWTTZkYUI3SkJLgXKJMlxTU5gxVjbf8HxSRSqOY4rCpcXqqLXGKy6muAKQj
+EOkixPoBTV4FpQOdRU+jiicqkjGWsCCrB8wKlkWm9KhfTaod36pMDVbUR4TC6AQEmom1spGqjLOq
+Ef1aU4uiD6pclapaEWskxcpRlv0E7D9vWtScTjavVXXrUicgV0SUlgN0VYtd04pXFYBVBKc1RGxt
+pNVnsvWwn3WtXju3WEM2VrMX5WxGPdtaG+62dftkrFAd/utWyHa2q7k1bmjHOFocYfVitT3pbTsZ
+XRS8NgSzJUR4XZddfaG1sF7V7XTDeVXlOpW5Y3TucKFbXO8et4p99e1ygfvYrT5XsvUl4n35mlz9
+vpe/zfXvfAEcC8P+t63Uba+BswrfF8p3sEZtMGUhzN7eYvav7QuscDFMXA2DNrGilfCHfxvizRJ1
+wV1Mr3RRHGEPx5Wk0jCpebcbzQBLcb1KVfGNM9vi4L6YxPQ1sXpp3OHLDhnE+xPxkSVAWEw4uMcz
+rmyKbfyK8ZYPwfFVMJIZLMQNN8qyhVzxfovcX9tGNsbdFTCQ91pdHrmXwmC2sJipnOEyn1jLNXZy
+l3Es/g4pX5jPJfbzkgHd5DQ/mcVRdvGhD1DlS1z5rlnmcJC57Aov06i8HeMxphWd6TNvWdCdJjRK
+JL1nSvf5FZdGNJM3jepWeJpxoP7Zea0sY/vOmbe1ZsWtS5jnJU660paINXr/rGk6C3nQRI60kY/9
+alco+7sgGLYftN2oXCty15butZxn7WxO21rV/DB0q5FdCWXzmtmmDrSjoQ1lNKrbzQ/GrY9LgO0P
+cJsP/04tXcCdbHH/mNzAnneqo21vVuMbxvpWcqlThWZLPnrN0m6zdt8ccVL7GuHIneidsVthY6+7
+2l80M8VPrfBzM5yW9954vrm77zD+OuRAHbmgir1X/monGtYq/2lYr7tzNif44WOGc81H0G8P/HsP
+Afc24Fa77KXDccB1fjrX0O0MHYea4zSX+McZTeuWC5vrzfC6rkXNWrGPm+zlDvYqol7ynp/859YO
+esXhSm9IN3zad0+yx9/e7IRbvO8Y/7vGdwx2LA/+4HA3PN8XXm+YO1zmEA/74/mN9WdT3u+WBzzS
+ZU1moMN75fI+/OcTH/rFf33mjjf9oguP86HrnFJSlxzV3231EDS9A1rPA915nsipE7zdBuf8zfFb
+YDUf2OhhHr2r8Z7y0wsdtkTHfd2Lr/vjU8Ld4bb+3vPrfDxDX8/SZ/f3k29zkDNf5BMmOfEFS3ql
+/rsd8rR/f87jX/SMHx3zSddxsjdx1wde2UcvuUc6uxd+vTdInWduZ/dyzRRzjAd7ozaAY5d/BAZ/
+5Sd/52dy6YdyrHBtDyh3qjB8H2h3IUh9I6h3LKd6Lld5E3h5FZh5sZd34veCkxeDoDeDogeA9SeA
+ODh78dZoMBiBMlhSFPh6NniBQ0iA49d8F/d8/hd9QDh9goeBhFeEZXeEc4d2zKB238Z2VXd/yud+
+G7h/Hdh/ivd/NRiAmqeF+MeFcWd2XyiBSkiDTAiHN1h9RIh6RriDSNiDefiDbxiEcfiEGUiHkkd+
+U2h+VYh+V6h+kyBBlniJmJiJmriJluiCqSeI/neYhDm2hGvXeJzgCzEjQkxXgnZ4gmC4DGJofGS4
+CcAAC7XYfpFXe9h3ewi4ffSHhfGjiqvwC2eYi/pne/ynffM3YoiYOqhoi894dcuXhsi4hsqYgtyn
+gN5XHt1mi93oe6zoha6Ih6Ooh6VogTpSZ+3RG7/HAcGHBygYiSA4idCYisgUjqA4jqJYaOY4hqY4
+NepYCcI4cwWYbQcYK77IjMBYj3KxFu24Ae94B/HYhlZ4iAuZHAFJCQP5kBoQkXYwka3nhnvYjAyJ
+kWBXkP52kD0gcH2xjQBpj3CIkk6nks2SkFN2kWiRkZOgJByZAR5ZByDpg653jk1YCwM5jADQ/pN8
+QpM7wJIhR4l7oZOSoIoyCXxMiS8JWDsLaJRS+QgwQj5V6Y5XuTFZKTxbmZOvICRKEpYQOZY44JTv
+B5Xx0ZWKgCW+EIUc+IgeKI8qSI9YcZSiUCxp0YhSiHhUSJGSaJFyWTh0WQjv0guB6IiGCYmIOY+K
+GReA2QnHUxSEmZeTuZeV2ZeXWReZqQl2A5nHuIvJ2IvLeJOLuQ2leQmcA5lZ55Y9U5bOc5ZHEZtX
+cl+8mZK8iJCt6XO305h6cEK/KZbBuZK42UG6STzGeQdFlJw+aZte05w+9Jx/GZ10QEjUOU7W6TfY
+uUWzKCzcGQew9J2kFZ6QM56bVJ5+oZ6E/qBP6vmTdBCUhTiU/oiOtyGfgQBS1Gmfc4Cf5WiII4mT
+0uGffvBavymgckCg/GigRMmH1qGgm4OP5GWVy1mTwxl4Q2KheNB0memgO/OKyhCL3QefzAGiddCO
+R0micAChqyah+1mU58GicsCRwgijbyCj6daPsviPMYKjq4OhZdUTPOoGPtp1pFijFGomRMoGSvmN
+draawomNv/iaCXqeh2Ok51Sl1siaWKqQWlqhXJoFU4pr7Ck67nlWKgqlZ2oFaQolUZo/5Bih+hmk
+/IkoIfQHc8pUFKSXbBiSFXmgZcoedQoGf7qeWRKngrCkadekemqjfPokx+mlakilqQCp/mEoqSkq
+pJWaoSGKqdXYp5tqoiDhqdr4pqFqqi1KqqppqabAqbCoqlrpkq3aqK86jbW5AYlqWqiKDCi6qqCa
+q7Q1B4tqXR3wq4VAqydqq2aJq8bqqm6QrGCKWo4KlMF6DMN6q6w6rbIqpbBqgHqTrQ+6rdQDpJ+6
+p+C6rObqA9baNcy6behaDN0ard/arqKaBvGaRJzgrKmqrsTKrvo6V++aA/3KQwebBgArrNCam9Ja
+sPtKBgmLAvMqkfVKDPcKsfkqscdKseNqkCtwsfeZscOwsc4ZsR4bPgsbAxU7si0bBg3LrQ+bsh27
+sr4asy3wstojCTObrjQ6qU+Ks/7q/gU8yzw6uwU/a681m50qS7Q52wVH6wIkuwZLq7FNS57FCrVZ
+lLTFqIG92p4jdaczmqfrSqlcq7BoGrLAeZ2KcLUnm7XvubVpW7RVMLVsCqxk+6NBe7ZDW7cqULUu
+y7Yz2ZRe+wRwKwwo67Q3C7jlWjeEq6HNIl4mq7hy66Z067gWe7gwpYOSiZWPWrnBsLhaS7CaG7ic
+e5J4manMCQiJO7qXW1dPe7pfygR4O7l98LoFEbuqNbu0W7tJcLutC3Wiu7sC662Z+7swG7yRq5w1
+tXV7y6THi6/Jq7zLawTCi3vwWLy/QLpza7rWS7U6m73e8ZHce5e8O3CNG76bOwTk/otdJRu9kTq9
+HFu97Iu0M9O8bfkEgvsq54ua9Guz9nu/+Auv+tuRUtC/SqC73Zu+Lbm+BIy6PfC+h6Sk/8sXiWmo
+EQy/OkDBdMQGDIy+Acy4A7zBwHOeHowbahDCANy3A4u2JnybN5DCSqDAQcDCGGyZGhzDTlUDNNwa
+qQuB18iX2Yi84MvDbisDP5wsQSyOV0rEWYrEFQwDSzwWTVyYlEmoGTyhJCnFCOguB1yd3HDFpXqY
+WqzDXIygXly+nhiZWNwFNmwDOOy9mHvEa0yWOfiJn/sFcTwDc+zAT3nHQAyFnvvG90DGzkuIBWq2
+L/y3gqy9cwiIXZiPfIzIYryP/mUrkml8qI8snl/LiLpIrmrQx0IsplBMpp38F+NRxUhBBX88wqUL
+w6nMxq8Uxkv5BqS8x4MqlJrspF08y897j7zqeWuQy6ybxbxcqJsMzFEQm6xcyU7wyi5sxLLMzFkV
+UbacQnZgzG2ryHjay0L7y9b8wT61umXsJ6krzYxMzY48zlNMkOYcq9t8uOoMzn4rzu6swpnHlgi8
+B9x8y5jMt+tMvXaczz2MiPx8yf4cs/WszL6sxgatyjiZ0ADdB//MqAEtvdNM0NUc0eSMhmHbJu/a
+0Fv80Jzs0T8wPT1B0do8CNxM0mhs0ih9BTMCPiwNnoWQyzAtmjs801RQJPBx/tMzZSdcutNFzNHt
+7NNHwCgtPMm6zAvcadRRrNSQ+2lf0ZnHnNPGKdWoTNVSMDGoidXnTNQ0wNWu6dVfDU69INbyvAgX
+a9bEidZOgDioGdKOwKxw7aFybbvHFY2tmAiJmtcruNdNgJyl7NbVJdh+Sdh8Pcw4yiwGMAGRbQCU
+jQGRnQKXvQWPfcF0LLsQzNg+XIIgiiyVLQGUfdmZTQGpbQKr3cpPbcqhedT1W9CgjbDhqKBsktmT
+XdoHkNqtXdqnLdm7fdqVTdy7PcaGPMSxPdW1zbzD/GnHPNmm3duSXd0XIN3TTd3ajdoVwN1iIJ+K
+PZrNjQQS9Z1wIt3GPd28/m0B2L3d2e3dxJ3dY2DenA3IcTnezg3SUdvNwu3b1d3aqt3b8P3e6m3d
+AH7IIpvR87vRs93R+D3D48qbfbLaup3e7G3avD3g1G3c7W0GEl7fsPy9Dv7gof3c7prIolCa4d3T
+JO6+kQuYssPhgL0WK77MLU4ED7mWQ40KOg6oCt6pIV7HI37jg2vi50Q+SVoGxIjR3pzJDh3OEE3k
+tm3kR94RSa7k0VjjMi3l+Uvl5fqMV04GFaTlUH7SXL6FklyH/hrmZ+ALZH7PUX7mJa7fa2Iidn7n
+eJ7ner7nJgLiDC7AtC3neezG9wuXG2jmgr6KXh7Bhv5DiT4D1qqvja6d/o/+h0K9spPuu5UujXTO
+w5n+2ZsOjotOwJ9ewqGOi2ArxaUe6Keu6J0ew6s+5K3u6sZIjdYb60k962h+6R6L6/is64uY5myt
+vL4e58Ae7LwuscWO6Me+XclesMve7EqczUQb7dJOxdSOs9Z+7S4Q6e267dzexk5N6m3q2aYe7uVc
+yIVe7r0L6ugek/FM7OyuvudurAUgAfd+AAWw7z+Q7yfg79806utuk3F9uvyu7/qe7wCvAwtPAg3/
+UdmO6fP+wPVuJf5+7/uu8BXw8BmP8QrP7x0/AR0/8gl/8CKf8fhu8hpf8h4P8iHfuXpM7gAw8wBQ
+8zZ/8zif8zrf2e1e/vEWj/AIv/L4fgEXD/QXX/RFL/JAv/RLr/JDb/Qpr/QmD/ECz746f/VYj/U8
+T++sjigYz/Jfn/AYsPBC7/Rkj/JJ//Ri//Qr//FKz/JU/+omnPV0X/dbT/FdXyco//ZCbwEHH/Z/
+//drb/Z9H/htz/Ypr/Fp7+zx/rt1//hXf/eB7LhkP/Qk7/eCn/hwr/kjf/lBv/d7v/mKj/ahn+4x
+P/CQn/o5zNM2jtIPnwGvvwPeDq6qX/uSf99I3PkeEPtE7+JVH761r/q3f+g+zft+7/tyv8HBn/rD
+7+jvLurJz+jL//jNT+nPb/qEbvXTb/f2fegP8v3gH/7iP/7kX/7m/n/+6D/707r93K8bnPH+8B//
+8j//9F//9n//+E//oez47J/1SmHJEHDkpNVenPXm3X8wFEeyNM8RCFa2BVA4lme6tm8g13e+9/lW
+UDgkFgOvW1K5ZDadT6hSVURGrVdsdvnjdntGcHhY1ZbNZ3Ra3ZkSyWt4XF7z1rtivNi+5/f9f8BA
+wUHCQsNDxETFHaO3uUfISDa7vErLS8xMzU3OTr1Az1DRUdJS0yBHSdXVyL3TV9hY2dmjRdtb3NxB
+2iNW3985XeFh4mLjY+Rk5WUeYOdn6Gjpaepq62vsbO1t7m7vb/Bw8XHycvNz9HT1dfZ293f4ePl5
++nr7e/x8/X3+G37/f4ABBQ4kWNDgQYQJFS5k2NDhQ4gRJdKLAAA7

linux-imx/Documentation/DocBook/media/dvb/audio.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/audio.xml b/linux-imx/Documentation/DocBook/media/dvb/audio.xml
new file mode 100644
index 0000000..a7ea56c
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/audio.xml
@@ -0,0 +1,1314 @@
+<title>DVB Audio Device</title>
+<para>The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It
+can be accessed through <emphasis role="tt">/dev/dvb/adapter0/audio0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/audio.h</emphasis> in your
+application.
+</para>
+<para>Please note that some DVB cards don&#8217;t have their own MPEG decoder, which results in
+the omission of the audio and video device.
+</para>
+<para>
+These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use
+of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls
+have been created to replace that functionality.</para>
+
+<section id="audio_data_types">
+<title>Audio Data Types</title>
+<para>This section describes the structures, data types and defines used when talking to the
+audio device.
+</para>
+
+<section id="audio-stream-source-t">
+<title>audio_stream_source_t</title>
+<para>The audio stream source is set through the AUDIO_SELECT_SOURCE call and can take
+the following values, depending on whether we are replaying from an internal (demux) or
+external (user write) source.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_SOURCE_DEMUX,
+	AUDIO_SOURCE_MEMORY
+} audio_stream_source_t;
+</programlisting>
+<para>AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
+DVR device) as the source of the video stream. If AUDIO_SOURCE_MEMORY
+is selected the stream comes from the application through the <emphasis role="tt">write()</emphasis> system
+call.
+</para>
+
+</section>
+<section id="audio-play-state-t">
+<title>audio_play_state_t</title>
+<para>The following values can be returned by the AUDIO_GET_STATUS call representing the
+state of audio playback.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_STOPPED,
+	AUDIO_PLAYING,
+	AUDIO_PAUSED
+} audio_play_state_t;
+</programlisting>
+
+</section>
+<section id="audio-channel-select-t">
+<title>audio_channel_select_t</title>
+<para>The audio channel selected via AUDIO_CHANNEL_SELECT is determined by the
+following values.
+</para>
+<programlisting>
+typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+} audio_channel_select_t;
+</programlisting>
+
+</section>
+<section id="audio-status">
+<title>struct audio_status</title>
+<para>The AUDIO_GET_STATUS call returns the following structure informing about various
+states of the playback operation.
+</para>
+<programlisting>
+typedef struct audio_status {
+	boolean AV_sync_state;
+	boolean mute_state;
+	audio_play_state_t play_state;
+	audio_stream_source_t stream_source;
+	audio_channel_select_t channel_select;
+	boolean bypass_mode;
+	audio_mixer_t mixer_state;
+} audio_status_t;
+</programlisting>
+
+</section>
+<section id="audio-mixer">
+<title>struct audio_mixer</title>
+<para>The following structure is used by the AUDIO_SET_MIXER call to set the audio
+volume.
+</para>
+<programlisting>
+typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+} audio_mixer_t;
+</programlisting>
+
+</section>
+<section id="audio_encodings">
+<title>audio encodings</title>
+<para>A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the following
+bits set according to the hardwares capabilities.
+</para>
+<programlisting>
+ #define AUDIO_CAP_DTS    1
+ #define AUDIO_CAP_LPCM   2
+ #define AUDIO_CAP_MP1    4
+ #define AUDIO_CAP_MP2    8
+ #define AUDIO_CAP_MP3   16
+ #define AUDIO_CAP_AAC   32
+ #define AUDIO_CAP_OGG   64
+ #define AUDIO_CAP_SDDS 128
+ #define AUDIO_CAP_AC3  256
+</programlisting>
+
+</section>
+<section id="audio-karaoke">
+<title>struct audio_karaoke</title>
+<para>The ioctl AUDIO_SET_KARAOKE uses the following format:
+</para>
+<programlisting>
+typedef
+struct audio_karaoke {
+	int vocal1;
+	int vocal2;
+	int melody;
+} audio_karaoke_t;
+</programlisting>
+<para>If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t at 70% each. If both,
+Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed into the left channel and Vocal2 into the
+right channel at 100% each. Ff Melody is non-zero, the melody channel gets mixed into left
+and right.
+</para>
+
+</section>
+<section id="audio-attributes-t">
+<title>audio attributes</title>
+<para>The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES:
+</para>
+<programlisting>
+ typedef uint16_t audio_attributes_t;
+ /&#x22C6;   bits: descr. &#x22C6;/
+ /&#x22C6;   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, &#x22C6;/
+ /&#x22C6;   12    multichannel extension &#x22C6;/
+ /&#x22C6;   11-10 audio type (0=not spec, 1=language included) &#x22C6;/
+ /&#x22C6;    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) &#x22C6;/
+ /&#x22C6;    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  &#x22C6;/
+ /&#x22C6;    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) &#x22C6;/
+ /&#x22C6;    2- 0 number of audio channels (n+1 channels) &#x22C6;/
+</programlisting>
+ </section></section>
+<section id="audio_function_calls">
+<title>Audio Function Calls</title>
+
+
+<section id="audio_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named audio device (e.g. /dev/dvb/adapter0/audio0)
+ for subsequent use. When an open() call has succeeded, the device will be ready
+ for use. The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the Audio Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an error
+ code will be returned. If the Audio Device is opened in O_RDONLY mode, the
+ only ioctl call that can be used is AUDIO_GET_STATUS. All other call will
+ return with an error code.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific audio device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="audio_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened audio device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="audio_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call can only be used if AUDIO_SOURCE_MEMORY is selected
+ in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
+ PES format. If O_NONBLOCK is not specified the function will block until
+ buffer space is available. The amount of data to be transferred is implied by
+ count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t write(int fd, const void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the PES data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode AUDIO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Attempted to write more data than the internal buffer can
+ hold.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_STOP"
+role="subsection"><title>AUDIO_STOP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to stop playing the current stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_STOP);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_STOP for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_PLAY"
+role="subsection"><title>AUDIO_PLAY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to start playing an audio stream from the
+ selected source.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_PLAY);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_PLAY for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_PAUSE"
+role="subsection"><title>AUDIO_PAUSE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call suspends the audio stream being played. Decoding and playing
+ are paused. It is then possible to restart again decoding and playing process of
+ the audio stream using AUDIO_CONTINUE command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>If AUDIO_SOURCE_MEMORY is selected in the ioctl call
+ AUDIO_SELECT_SOURCE, the DVB-subsystem will not decode (consume)
+ any more data until the ioctl call AUDIO_CONTINUE or AUDIO_PLAY is
+ performed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_PAUSE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_PAUSE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CONTINUE"
+role="subsection"><title>AUDIO_CONTINUE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>It only works if the stream were previously stopped with AUDIO_PAUSE</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_CONTINUE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CONTINUE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SELECT_SOURCE"
+role="subsection"><title>AUDIO_SELECT_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call informs the audio device which source shall be used
+ for the input data. The possible sources are demux or memory. If
+ AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
+ through the write command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SELECT_SOURCE,
+ audio_stream_source_t source);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SELECT_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_stream_source_t
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates the source that shall be used for the Audio
+ stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_MUTE"
+role="subsection"><title>AUDIO_SET_MUTE</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; with the <constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant> flag instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the audio device to mute the stream that is currently being
+ played.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_MUTE,
+ boolean state);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_MUTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean state</para>
+</entry><entry
+ align="char">
+<para>Indicates if audio device shall mute or not.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE Audio Mute</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE Audio Un-mute</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_AV_SYNC"
+role="subsection"><title>AUDIO_SET_AV_SYNC</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to turn ON or OFF A/V synchronization.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_AV_SYNC,
+ boolean state);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_AV_SYNC for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean state</para>
+</entry><entry
+ align="char">
+<para>Tells the DVB subsystem if A/V synchronization shall be
+ ON or OFF.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE AV-sync ON</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE AV-sync OFF</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_BYPASS_MODE"
+role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to bypass the Audio decoder and forward
+ the stream without decoding. This mode shall be used if streams that can&#8217;t be
+ handled by the DVB system shall be decoded. Dolby DigitalTM streams are
+ automatically forwarded by the DVB subsystem if the hardware can handle it.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_SET_BYPASS_MODE, boolean mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_BYPASS_MODE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean mode</para>
+</entry><entry
+ align="char">
+<para>Enables or disables the decoding of the current Audio
+ stream in the DVB subsystem.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE Bypass is disabled</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE Bypass is enabled</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+<constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> control instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_BILINGUAL_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_BILINGUAL_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. It has been replaced by
+the V4L2 <constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> control
+for MPEG decoders controlled through V4L2.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row>
+</tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_PTS"
+role="subsection"><title>AUDIO_GET_PTS</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. If you need this functionality,
+then please contact the linux-media mailing list (&v4l-ml;).</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current PTS timestamp.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_PTS, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_PTS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+</para>
+<para>
+The PTS should belong to the currently played
+frame if possible, but may also be a value close to it
+like the PTS of the last decoded frame or the last PTS
+extracted by the PES parser.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_STATUS"
+role="subsection"><title>AUDIO_GET_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current state of the Audio
+ Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_GET_STATUS,
+ struct audio_status &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_STATUS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct audio_status
+ *status</para>
+</entry><entry
+ align="char">
+<para>Returns the current state of Audio Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_CAPABILITIES"
+role="subsection"><title>AUDIO_GET_CAPABILITIES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to tell us about the decoding capabilities
+ of the audio hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_CAPABILITIES, unsigned int &#x22C6;cap);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_CAPABILITIES for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned int *cap</para>
+</entry><entry
+ align="char">
+<para>Returns a bit array of supported sound formats.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_CLEAR_BUFFER"
+role="subsection"><title>AUDIO_CLEAR_BUFFER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to clear all software and hardware buffers
+ of the audio decoder device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_CLEAR_BUFFER for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_ID"
+role="subsection"><title>AUDIO_SET_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl selects which sub-stream is to be decoded if a program or system
+ stream is sent to the video device. If no audio stream type is set the id has to be
+ in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for AC3 and in [0xA0,0xA7]
+ for LPCM. More specifications may follow for other stream types. If the stream
+ type is set the id just specifies the substream id of the audio stream and only
+ the first 5 bits are recognized.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>audio sub-stream id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_MIXER"
+role="subsection"><title>AUDIO_SET_MIXER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl lets you adjust the mixer settings of the audio decoder.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_SET_MIXER,
+ audio_mixer_t &#x22C6;mix);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_mixer_t *mix</para>
+</entry><entry
+ align="char">
+<para>mixer settings.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_SET_STREAMTYPE"
+role="subsection"><title>AUDIO_SET_STREAMTYPE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl tells the driver which kind of audio stream to expect. This is useful
+ if the stream offers several audio sub-streams like LPCM and AC3.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_STREAMTYPE,
+ int type);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_STREAMTYPE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int type</para>
+</entry><entry
+ align="char">
+<para>stream type</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>type is not a valid or supported stream type.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_EXT_ID"
+role="subsection"><title>AUDIO_SET_EXT_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl can be used to set the extension id for MPEG streams in DVD
+ playback. Only the first 3 bits are recognized.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_EXT_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_EXT_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>audio sub_stream_id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>id is not a valid id.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_ATTRIBUTES"
+role="subsection"><title>AUDIO_SET_ATTRIBUTES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is intended for DVD playback and allows you to set certain
+ information about the audio stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES,
+ audio_attributes_t attr );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_ATTRIBUTES for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_attributes_t
+ attr</para>
+</entry><entry
+ align="char">
+<para>audio attributes according to section ??</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>attr is not a valid or supported attribute setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="AUDIO_SET_KARAOKE"
+role="subsection"><title>AUDIO_SET_KARAOKE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl allows one to set the mixer settings for a karaoke DVD.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = AUDIO_SET_KARAOKE,
+ audio_karaoke_t &#x22C6;karaoke);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_SET_KARAOKE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_karaoke_t
+ *karaoke</para>
+</entry><entry
+ align="char">
+<para>karaoke settings according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>karaoke is not a valid or supported karaoke setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section>
+</section>

linux-imx/Documentation/DocBook/media/dvb/ca.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/ca.xml b/linux-imx/Documentation/DocBook/media/dvb/ca.xml
new file mode 100644
index 0000000..85eaf4f
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/ca.xml
@@ -0,0 +1,582 @@
+<title>DVB CA Device</title>
+<para>The DVB CA device controls the conditional access hardware. It can be accessed through
+<emphasis role="tt">/dev/dvb/adapter0/ca0</emphasis>. Data types and and ioctl definitions can be accessed by
+including <emphasis role="tt">linux/dvb/ca.h</emphasis> in your application.
+</para>
+
+<section id="ca_data_types">
+<title>CA Data Types</title>
+
+
+<section id="ca-slot-info">
+<title>ca_slot_info_t</title>
+ <programlisting>
+typedef struct ca_slot_info {
+	int num;               /&#x22C6; slot number &#x22C6;/
+
+	int type;              /&#x22C6; CA interface this slot supports &#x22C6;/
+#define CA_CI            1     /&#x22C6; CI high level interface &#x22C6;/
+#define CA_CI_LINK       2     /&#x22C6; CI link layer level interface &#x22C6;/
+#define CA_CI_PHYS       4     /&#x22C6; CI physical layer level interface &#x22C6;/
+#define CA_DESCR         8     /&#x22C6; built-in descrambler &#x22C6;/
+#define CA_SC          128     /&#x22C6; simple smart card interface &#x22C6;/
+
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /&#x22C6; module (or card) inserted &#x22C6;/
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+</programlisting>
+
+</section>
+<section id="ca-descr-info">
+<title>ca_descr_info_t</title>
+<programlisting>
+typedef struct ca_descr_info {
+	unsigned int num;  /&#x22C6; number of available descramblers (keys) &#x22C6;/
+	unsigned int type; /&#x22C6; type of supported scrambling system &#x22C6;/
+#define CA_ECD           1
+#define CA_NDS           2
+#define CA_DSS           4
+} ca_descr_info_t;
+</programlisting>
+
+</section>
+<section id="ca-caps">
+<title>ca_caps_t</title>
+<programlisting>
+typedef struct ca_caps {
+	unsigned int slot_num;  /&#x22C6; total number of CA card and module slots &#x22C6;/
+	unsigned int slot_type; /&#x22C6; OR of all supported types &#x22C6;/
+	unsigned int descr_num; /&#x22C6; total number of descrambler slots (keys) &#x22C6;/
+	unsigned int descr_type;/&#x22C6; OR of all supported types &#x22C6;/
+ } ca_cap_t;
+</programlisting>
+
+</section>
+<section id="ca-msg">
+<title>ca_msg_t</title>
+<programlisting>
+/&#x22C6; a message to/from a CI-CAM &#x22C6;/
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
+</programlisting>
+
+</section>
+<section id="ca-descr">
+<title>ca_descr_t</title>
+<programlisting>
+typedef struct ca_descr {
+	unsigned int index;
+	unsigned int parity;
+	unsigned char cw[8];
+} ca_descr_t;
+</programlisting>
+</section>
+
+<section id="ca-pid">
+<title>ca-pid</title>
+<programlisting>
+typedef struct ca_pid {
+	unsigned int pid;
+	int index;		/&#x22C6; -1 == disable&#x22C6;/
+} ca_pid_t;
+</programlisting>
+</section></section>
+
+<section id="ca_function_calls">
+<title>CA Function Calls</title>
+
+
+<section id="ca_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named ca device (e.g. /dev/ost/ca) for subsequent use.</para>
+<para>When an open() call has succeeded, the device will be ready for use.
+ The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the CA Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an error
+ code will be returned.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="ca_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened audio device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section>
+
+<section id="CA_RESET"
+role="subsection"><title>CA_RESET</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_RESET);
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_RESET for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_CAP"
+role="subsection"><title>CA_GET_CAP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_CAP,
+ ca_caps_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_CAP for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_caps_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_SLOT_INFO"
+role="subsection"><title>CA_GET_SLOT_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_SLOT_INFO,
+ ca_slot_info_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_SLOT_INFO for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_slot_info_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_DESCR_INFO"
+role="subsection"><title>CA_GET_DESCR_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_DESCR_INFO,
+ ca_descr_info_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_DESCR_INFO for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_descr_info_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_MSG"
+role="subsection"><title>CA_GET_MSG</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_MSG,
+ ca_msg_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_MSG for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_msg_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SEND_MSG"
+role="subsection"><title>CA_SEND_MSG</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SEND_MSG,
+ ca_msg_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SEND_MSG for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_msg_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SET_DESCR"
+role="subsection"><title>CA_SET_DESCR</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SET_DESCR,
+ ca_descr_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SET_DESCR for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_descr_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SET_PID"
+role="subsection"><title>CA_SET_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SET_PID,
+ ca_pid_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SET_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_pid_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+</section>

linux-imx/Documentation/DocBook/media/dvb/demux.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/demux.xml b/linux-imx/Documentation/DocBook/media/dvb/demux.xml
new file mode 100644
index 0000000..86de89c
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/demux.xml
@@ -0,0 +1,1130 @@
+<title>DVB Demux Device</title>
+
+<para>The DVB demux device controls the filters of the DVB hardware/software. It can be
+accessed through <emphasis role="tt">/dev/adapter0/demux0</emphasis>. Data types and and ioctl definitions can be
+accessed by including <emphasis role="tt">linux/dvb/dmx.h</emphasis> in your application.
+</para>
+<section id="dmx_types">
+<title>Demux Data Types</title>
+
+<section id="dmx-output-t">
+<title>dmx_output_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_OUT_DECODER, /&#x22C6; Streaming directly to decoder. &#x22C6;/
+	DMX_OUT_TAP,     /&#x22C6; Output going to a memory buffer &#x22C6;/
+			 /&#x22C6; (to be retrieved via the read command).&#x22C6;/
+	DMX_OUT_TS_TAP,  /&#x22C6; Output multiplexed into a new TS  &#x22C6;/
+			 /&#x22C6; (to be retrieved by reading from the &#x22C6;/
+			 /&#x22C6; logical DVR device).                 &#x22C6;/
+	DMX_OUT_TSDEMUX_TAP /&#x22C6; Like TS_TAP but retrieved from the DMX device &#x22C6;/
+} dmx_output_t;
+</programlisting>
+<para><emphasis role="tt">DMX_OUT_TAP</emphasis> delivers the stream output to the demux device on which the ioctl is
+called.
+</para>
+<para><emphasis role="tt">DMX_OUT_TS_TAP</emphasis> routes output to the logical DVR device <emphasis role="tt">/dev/dvb/adapter0/dvr0</emphasis>,
+which delivers a TS multiplexed from all filters for which <emphasis role="tt">DMX_OUT_TS_TAP</emphasis> was
+specified.
+</para>
+</section>
+
+<section id="dmx-input-t">
+<title>dmx_input_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_IN_FRONTEND, /&#x22C6; Input from a front-end device.  &#x22C6;/
+	DMX_IN_DVR       /&#x22C6; Input from the logical DVR device.  &#x22C6;/
+} dmx_input_t;
+</programlisting>
+</section>
+
+<section id="dmx-pes-type-t">
+<title>dmx_pes_type_t</title>
+<programlisting>
+typedef enum
+{
+	DMX_PES_AUDIO0,
+	DMX_PES_VIDEO0,
+	DMX_PES_TELETEXT0,
+	DMX_PES_SUBTITLE0,
+	DMX_PES_PCR0,
+
+	DMX_PES_AUDIO1,
+	DMX_PES_VIDEO1,
+	DMX_PES_TELETEXT1,
+	DMX_PES_SUBTITLE1,
+	DMX_PES_PCR1,
+
+	DMX_PES_AUDIO2,
+	DMX_PES_VIDEO2,
+	DMX_PES_TELETEXT2,
+	DMX_PES_SUBTITLE2,
+	DMX_PES_PCR2,
+
+	DMX_PES_AUDIO3,
+	DMX_PES_VIDEO3,
+	DMX_PES_TELETEXT3,
+	DMX_PES_SUBTITLE3,
+	DMX_PES_PCR3,
+
+	DMX_PES_OTHER
+} dmx_pes_type_t;
+</programlisting>
+</section>
+
+<section id="dmx-filter">
+<title>struct dmx_filter</title>
+ <programlisting>
+ typedef struct dmx_filter
+{
+	__u8  filter[DMX_FILTER_SIZE];
+	__u8  mask[DMX_FILTER_SIZE];
+	__u8  mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
+</programlisting>
+</section>
+
+<section id="dmx-sct-filter-params">
+<title>struct dmx_sct_filter_params</title>
+<programlisting>
+struct dmx_sct_filter_params
+{
+	__u16          pid;
+	dmx_filter_t   filter;
+	__u32          timeout;
+	__u32          flags;
+#define DMX_CHECK_CRC       1
+#define DMX_ONESHOT         2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT   0x8000
+};
+</programlisting>
+</section>
+
+<section id="dmx-pes-filter-params">
+<title>struct dmx_pes_filter_params</title>
+<programlisting>
+struct dmx_pes_filter_params
+{
+	__u16          pid;
+	dmx_input_t    input;
+	dmx_output_t   output;
+	dmx_pes_type_t pes_type;
+	__u32          flags;
+};
+</programlisting>
+</section>
+
+<section id="dmx-event">
+<title>struct dmx_event</title>
+ <programlisting>
+ struct dmx_event
+ {
+	 dmx_event_t          event;
+	 time_t               timeStamp;
+	 union
+	 {
+		 dmx_scrambling_status_t scrambling;
+	 } u;
+ };
+</programlisting>
+</section>
+
+<section id="dmx-stc">
+<title>struct dmx_stc</title>
+<programlisting>
+struct dmx_stc {
+	unsigned int num;	/&#x22C6; input : which STC? 0..N &#x22C6;/
+	unsigned int base;	/&#x22C6; output: divisor for stc to get 90 kHz clock &#x22C6;/
+	__u64 stc;		/&#x22C6; output: stc in 'base'&#x22C6;90 kHz units &#x22C6;/
+};
+</programlisting>
+</section>
+
+<section id="dmx-caps">
+<title>struct dmx_caps</title>
+<programlisting>
+ typedef struct dmx_caps {
+	__u32 caps;
+	int num_decoders;
+} dmx_caps_t;
+</programlisting>
+</section>
+
+<section id="dmx-source-t">
+<title>enum dmx_source_t</title>
+<programlisting>
+typedef enum {
+	DMX_SOURCE_FRONT0 = 0,
+	DMX_SOURCE_FRONT1,
+	DMX_SOURCE_FRONT2,
+	DMX_SOURCE_FRONT3,
+	DMX_SOURCE_DVR0   = 16,
+	DMX_SOURCE_DVR1,
+	DMX_SOURCE_DVR2,
+	DMX_SOURCE_DVR3
+} dmx_source_t;
+</programlisting>
+</section>
+
+</section>
+<section id="dmx_fcalls">
+<title>Demux Function Calls</title>
+
+<section id="dmx_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call, used with a device name of /dev/dvb/adapter0/demux0,
+ allocates a new filter and returns a handle which can be used for subsequent
+ control of that filter. This call has to be made for each filter to be used, i.e. every
+ returned file descriptor is a reference to a single filter. /dev/dvb/adapter0/dvr0
+ is a logical device to be used for retrieving Transport Streams for digital
+ video recording. When reading from this device a transport stream containing
+ the packets from all PES filters set in the corresponding demux device
+ (/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A
+ recorded Transport Stream is replayed by writing to this device. </para>
+<para>The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of demux device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EMFILE</para>
+</entry><entry
+ align="char">
+<para>&#8220;Too many open files&#8221;, i.e. no more filters available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>The driver failed to allocate enough memory.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call deactivates and deallocates a filter that was previously
+ allocated via the open() call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fread">
+<title>read()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call returns filtered data, which might be section or PES data. The
+ filtered data is transferred from the driver&#8217;s internal circular buffer to buf. The
+ maximum amount of data to be transferred is implied by count.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>When returning section data the driver always tries to return a complete single
+ section (even though buf would provide buffer space for more data). If the size
+ of the buffer is smaller than the section as much as possible will be returned,
+ and the remaining data will be provided in subsequent calls.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The size of the internal buffer is 2 * 4096 bytes (the size of two maximum
+ sized sections) by default. The size of this buffer may be changed by using the
+ DMX_SET_BUFFER_SIZE function. If the buffer is not large enough, or if
+ the read operations are not performed fast enough, this may result in a buffer
+ overflow error. In this case EOVERFLOW will be returned, and the circular
+ buffer will be emptied. This call is blocking if there is no data to return, i.e. the
+ process will be put to sleep waiting for data, unless the O_NONBLOCK flag
+ is specified.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Note that in order to be able to read, the filtering process has to be started
+ by defining either a section or a PES filter by means of the ioctl functions,
+ and then starting the filtering process via the DMX_START ioctl function
+ or by setting the DMX_IMMEDIATE_START flag. If the reading is done
+ from a logical DVR demux device, the data will constitute a Transport Stream
+ including the packets from all PES filters in the corresponding demux device
+ /dev/dvb/adapter0/demux0 having the output set to DMX_OUT_TS_TAP.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t read(int fd, void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer to be used for returned filtered data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>No data to return and O_NONBLOCK was specified.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ECRC</para>
+</entry><entry
+ align="char">
+<para>Last section had a CRC error - no data returned. The
+ buffer is flushed.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>The filtered data was not read from the buffer in due
+ time, resulting in non-read data being lost. The buffer is
+ flushed.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ETIMEDOUT</para>
+</entry><entry
+ align="char">
+<para>The section was not loaded within the stated timeout
+ period. See ioctl DMX_SET_FILTER for how to set a
+ timeout.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>The driver failed to write to the callers buffer due to an
+ invalid *buf pointer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="dmx_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call is only provided by the logical device /dev/dvb/adapter0/dvr0,
+ associated with the physical demux device that provides the actual DVR
+ functionality. It is used for replay of a digitally recorded Transport Stream.
+ Matching filters have to be defined in the corresponding physical demux
+ device, /dev/dvb/adapter0/demux0. The amount of data to be transferred is
+ implied by count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>ssize_t write(int fd, const void &#x22C6;buf, size_t
+ count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the Transport Stream.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>No data was written. This
+ might happen if O_NONBLOCK was specified and there
+ is no more buffer space available (if O_NONBLOCK is
+ not specified the function will block until buffer space is
+ available).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. The corresponding demux device is setup to
+ receive data from the front- end. Make sure that these
+ filters are stopped and that the filters with input set to
+ DMX_IN_DVR are started.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_START">
+<title>DMX_START</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to start the actual filtering operation defined via the ioctl
+ calls DMX_SET_FILTER or DMX_SET_PES_FILTER.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_START);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_START for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument, i.e. no filtering parameters provided via
+ the DMX_SET_FILTER or DMX_SET_PES_FILTER
+ functions.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. There are active filters filtering data from
+ another input source. Make sure that these filters are
+ stopped before starting this filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_STOP">
+<title>DMX_STOP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to stop the actual filtering operation defined via the
+ ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and started via
+ the DMX_START command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_STOP);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_STOP for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_FILTER">
+<title>DMX_SET_FILTER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets up a filter according to the filter and mask parameters
+ provided. A timeout may be defined stating number of seconds to wait for a
+ section to be loaded. A value of 0 means that no timeout should be applied.
+ Finally there is a flag field where it is possible to state whether a section should
+ be CRC-checked, whether the filter should be a &#8221;one-shot&#8221; filter, i.e. if the
+ filtering operation should be stopped after the first section is received, and
+ whether the filtering operation should be started immediately (without waiting
+ for a DMX_START ioctl call). If a filter was previously set-up, this filter will
+ be canceled, and the receive buffer will be flushed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_SET_FILTER,
+ struct dmx_sct_filter_params &#x22C6;params);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_FILTER for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dmx_sct_filter_params
+ *params</para>
+</entry><entry
+ align="char">
+<para>Pointer to structure containing filter parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_PES_FILTER">
+<title>DMX_SET_PES_FILTER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets up a PES filter according to the parameters provided. By a
+ PES filter is meant a filter that is based just on the packet identifier (PID), i.e.
+ no PES header or payload filtering capability is supported.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The transport stream destination for the filtered output may be set. Also the
+ PES type may be stated in order to be able to e.g. direct a video stream directly
+ to the video decoder. Finally there is a flag field where it is possible to state
+ whether the filtering operation should be started immediately (without waiting
+ for a DMX_START ioctl call). If a filter was previously set-up, this filter will
+ be cancelled, and the receive buffer will be flushed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_SET_PES_FILTER,
+ struct dmx_pes_filter_params &#x22C6;params);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_PES_FILTER for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dmx_pes_filter_params
+ *params</para>
+</entry><entry
+ align="char">
+<para>Pointer to structure containing filter parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>This error code indicates that there are conflicting
+ requests. There are active filters filtering data from
+ another input source. Make sure that these filters are
+ stopped before starting this filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_SET_BUFFER_SIZE">
+<title>DMX_SET_BUFFER_SIZE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to set the size of the circular buffer used for filtered data.
+ The default size is two maximum sized sections, i.e. if this function is not called
+ a buffer size of 2 * 4096 bytes will be used.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ DMX_SET_BUFFER_SIZE, unsigned long size);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_BUFFER_SIZE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned long size</para>
+</entry><entry
+ align="char">
+<para>Size of circular buffer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_GET_EVENT">
+<title>DMX_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns an event if available. If an event is not available,
+ the behavior depends on whether the device is in blocking or non-blocking
+ mode. In the latter case, the call fails immediately with errno set to
+ EWOULDBLOCK. In the former case, the call blocks until an event becomes
+ available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The standard Linux poll() and/or select() system calls can be used with the
+ device file descriptor to watch for new events. For select(), the file descriptor
+ should be included in the exceptfds argument, and for poll(), POLLPRI should
+ be specified as the wake-up condition. Only the latest event for each filter is
+ saved.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_GET_EVENT,
+ struct dmx_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_EVENT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dmx_event *ev</para>
+</entry><entry
+ align="char">
+<para>Pointer to the location where the event is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="DMX_GET_STC">
+<title>DMX_GET_STC</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the current value of the system time counter (which is driven
+ by a PES filter of type DMX_PES_PCR). Some hardware supports more than one
+ STC, so you must specify which one by setting the num field of stc before the ioctl
+ (range 0...n). The result is returned in form of a ratio with a 64 bit numerator
+ and a 32 bit denominator, so the real 90kHz STC value is stc-&#x003E;stc /
+ stc-&#x003E;base
+ .</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request = DMX_GET_STC, struct
+ dmx_stc &#x22C6;stc);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_STC for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dmx_stc *stc</para>
+</entry><entry
+ align="char">
+<para>Pointer to the location where the stc is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid stc number.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section>
+
+<section id="DMX_GET_PES_PIDS"
+role="subsection"><title>DMX_GET_PES_PIDS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_GET_PES_PIDS,
+ __u16[5]);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_PES_PIDS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16[5]
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_GET_CAPS"
+role="subsection"><title>DMX_GET_CAPS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_GET_CAPS,
+ dmx_caps_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_CAPS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_caps_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_SOURCE"
+role="subsection"><title>DMX_SET_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_SET_SOURCE,
+ dmx_source_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_source_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_ADD_PID"
+role="subsection"><title>DMX_ADD_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_ADD_PID,
+ __u16 *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_ADD_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_REMOVE_PID"
+role="subsection"><title>DMX_REMOVE_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_REMOVE_PID,
+ __u16 *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_REMOVE_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+
+</section>

linux-imx/Documentation/DocBook/media/dvb/dvbapi.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/dvbapi.xml b/linux-imx/Documentation/DocBook/media/dvb/dvbapi.xml
new file mode 100644
index 0000000..0197bcc
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/dvbapi.xml
@@ -0,0 +1,141 @@
+<partinfo>
+<authorgroup>
+<author>
+<firstname>Ralph</firstname>
+<surname>Metzler</surname>
+<othername role="mi">J. K.</othername>
+<affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
+</author>
+<author>
+<firstname>Marcus</firstname>
+<surname>Metzler</surname>
+<othername role="mi">O. C.</othername>
+<affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
+</author>
+</authorgroup>
+<authorgroup>
+<author>
+<firstname>Mauro</firstname>
+<othername role="mi">Carvalho</othername>
+<surname>Chehab</surname>
+<affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
+<contrib>Ported document to Docbook XML.</contrib>
+</author>
+</authorgroup>
+<copyright>
+	<year>2002</year>
+	<year>2003</year>
+	<holder>Convergence GmbH</holder>
+</copyright>
+<copyright>
+	<year>2009-2012</year>
+	<holder>Mauro Carvalho Chehab</holder>
+</copyright>
+
+<revhistory>
+<!-- Put document revisions here, newest first. -->
+<revision>
+	<revnumber>2.0.4</revnumber>
+	<date>2011-05-06</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add more information about DVB APIv5, better describing the frontend GET/SET props ioctl's.
+	</revremark>
+</revision>
+<revision>
+	<revnumber>2.0.3</revnumber>
+	<date>2010-07-03</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add some frontend capabilities flags, present on kernel, but missing at the specs.
+	</revremark>
+</revision>
+<revision>
+	<revnumber>2.0.2</revnumber>
+	<date>2009-10-25</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+	</revremark>
+</revision>
+<revision>
+<revnumber>2.0.1</revnumber>
+<date>2009-09-16</date>
+<authorinitials>mcc</authorinitials>
+<revremark>
+Added ISDB-T test originally written by Patrick Boettcher
+</revremark>
+</revision>
+<revision>
+<revnumber>2.0.0</revnumber>
+<date>2009-09-06</date>
+<authorinitials>mcc</authorinitials>
+<revremark>Conversion from LaTex to DocBook XML. The
+	contents is the same as the original LaTex version.</revremark>
+</revision>
+<revision>
+<revnumber>1.0.0</revnumber>
+<date>2003-07-24</date>
+<authorinitials>rjkm</authorinitials>
+<revremark>Initial revision on LaTEX.</revremark>
+</revision>
+</revhistory>
+</partinfo>
+
+
+<title>LINUX DVB API</title>
+<subtitle>Version 5.10</subtitle>
+<!-- ADD THE CHAPTERS HERE -->
+  <chapter id="dvb_introdution">
+    &sub-intro;
+  </chapter>
+  <chapter id="dvb_frontend">
+    &sub-frontend;
+  </chapter>
+  <chapter id="dvb_demux">
+    &sub-demux;
+  </chapter>
+  <chapter id="dvb_video">
+    &sub-video;
+  </chapter>
+  <chapter id="dvb_audio">
+    &sub-audio;
+  </chapter>
+  <chapter id="dvb_ca">
+    &sub-ca;
+  </chapter>
+  <chapter id="dvb_net">
+    &sub-net;
+  </chapter>
+  <chapter id="dvb_kdapi">
+    &sub-kdapi;
+  </chapter>
+  <chapter id="dvb_examples">
+    &sub-examples;
+  </chapter>
+<!-- END OF CHAPTERS -->
+  <appendix id="audio_h">
+    <title>DVB Audio Header File</title>
+    &sub-audio-h;
+  </appendix>
+  <appendix id="ca_h">
+    <title>DVB Conditional Access Header File</title>
+    &sub-ca-h;
+  </appendix>
+  <appendix id="dmx_h">
+    <title>DVB Demux Header File</title>
+    &sub-dmx-h;
+  </appendix>
+  <appendix id="frontend_h">
+    <title>DVB Frontend Header File</title>
+    &sub-frontend-h;
+  </appendix>
+  <appendix id="net_h">
+    <title>DVB Network Header File</title>
+    &sub-net-h;
+  </appendix>
+  <appendix id="video_h">
+    <title>DVB Video Header File</title>
+    &sub-video-h;
+  </appendix>
+

linux-imx/Documentation/DocBook/media/dvb/dvbproperty.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/dvbproperty.xml b/linux-imx/Documentation/DocBook/media/dvb/dvbproperty.xml
new file mode 100644
index 0000000..a9b15e3
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -0,0 +1,1281 @@
+<section id="FE_GET_SET_PROPERTY">
+<title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
+<para>This section describes the DVB version 5 extension of the DVB-API, also
+called "S2API", as this API were added to provide support for DVB-S2. It was
+designed to be able to replace the old frontend API. Yet, the DISEQC and
+the capability ioctls weren't implemented yet via the new way.</para>
+<para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant>
+API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters">
+struct <constant>dvb_frontend_parameters</constant></link> were used.</para>
+<section id="dtv-stats">
+<title>DTV stats type</title>
+<programlisting>
+struct dtv_stats {
+	__u8 scale;	/* enum fecap_scale_params type */
+	union {
+		__u64 uvalue;	/* for counters and relative scales */
+		__s64 svalue;	/* for 1/1000 dB measures */
+	};
+} __packed;
+</programlisting>
+</section>
+<section id="dtv-fe-stats">
+<title>DTV stats type</title>
+<programlisting>
+#define MAX_DTV_STATS   4
+
+struct dtv_fe_stats {
+	__u8 len;
+	struct dtv_stats stat[MAX_DTV_STATS];
+} __packed;
+</programlisting>
+</section>
+
+<section id="dtv-property">
+<title>DTV property type</title>
+<programlisting>
+/* Reserved fields should be set to 0 */
+
+struct dtv_property {
+	__u32 cmd;
+	__u32 reserved[3];
+	union {
+		__u32 data;
+		struct dtv_fe_stats st;
+		struct {
+			__u8 data[32];
+			__u32 len;
+			__u32 reserved1[3];
+			void *reserved2;
+		} buffer;
+	} u;
+	int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+</programlisting>
+</section>
+<section id="dtv-properties">
+<title>DTV properties type</title>
+<programlisting>
+struct dtv_properties {
+	__u32 num;
+	struct dtv_property *props;
+};
+</programlisting>
+</section>
+
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_SET_PROPERTY">
+<title>FE_SET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section>
+	<title>Property types</title>
+<para>
+On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
+get/set up to 64 properties. The actual meaning of each property is described on the next sections.
+</para>
+
+<para>The available frontend property types are shown on the next section.</para>
+</section>
+
+<section id="fe_property_parameters">
+	<title>Digital TV property parameters</title>
+	<section id="DTV-UNDEFINED">
+	<title><constant>DTV_UNDEFINED</constant></title>
+	<para>Used internally. A GET/SET operation for it won't change or return anything.</para>
+	</section>
+	<section id="DTV-TUNE">
+	<title><constant>DTV_TUNE</constant></title>
+	<para>Interpret the cache of data, build either a traditional frontend tunerequest so we can pass validation in the <constant>FE_SET_FRONTEND</constant> ioctl.</para>
+	</section>
+	<section id="DTV-CLEAR">
+	<title><constant>DTV_CLEAR</constant></title>
+	<para>Reset a cache of data specific to the frontend here. This does not effect hardware.</para>
+	</section>
+	<section id="DTV-FREQUENCY">
+		<title><constant>DTV_FREQUENCY</constant></title>
+
+		<para>Central frequency of the channel.</para>
+
+		<para>Notes:</para>
+		<para>1)For satellital delivery systems, it is measured in kHz.
+			For the other ones, it is measured in Hz.</para>
+		<para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
+			the channel which is 6MHz.</para>
+
+		<para>3)As in ISDB-Tsb the channel consists of only one or three segments the
+			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
+			central frequency of the channel is expected.</para>
+	</section>
+	<section id="DTV-MODULATION">
+	<title><constant>DTV_MODULATION</constant></title>
+<para>Specifies the frontend modulation type for cable and satellite types. The modulation can be one of the types bellow:</para>
+<programlisting>
+ typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+	QAM_4_NR,
+ } fe_modulation_t;
+</programlisting>
+	</section>
+	<section id="DTV-BANDWIDTH-HZ">
+		<title><constant>DTV_BANDWIDTH_HZ</constant></title>
+
+		<para>Bandwidth for the channel, in HZ.</para>
+
+		<para>Possible values:
+			<constant>1712000</constant>,
+			<constant>5000000</constant>,
+			<constant>6000000</constant>,
+			<constant>7000000</constant>,
+			<constant>8000000</constant>,
+			<constant>10000000</constant>.
+		</para>
+
+		<para>Notes:</para>
+
+		<para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para>
+		<para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para>
+		<para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth
+			 for DVB-C depends on the symbol rate</para>
+		<para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
+			other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
+			DTV_ISDBT_SB_SEGMENT_COUNT).</para>
+		<para>5) DVB-T supports 6, 7 and 8MHz.</para>
+		<para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para>
+	</section>
+	<section id="DTV-INVERSION">
+	<title><constant>DTV_INVERSION</constant></title>
+	<para>The Inversion field can take one of these values:
+	</para>
+	<programlisting>
+	typedef enum fe_spectral_inversion {
+		INVERSION_OFF,
+		INVERSION_ON,
+		INVERSION_AUTO
+	} fe_spectral_inversion_t;
+	</programlisting>
+	<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+	(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+	itself.
+	</para>
+	</section>
+	<section id="DTV-DISEQC-MASTER">
+	<title><constant>DTV_DISEQC_MASTER</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-SYMBOL-RATE">
+	<title><constant>DTV_SYMBOL_RATE</constant></title>
+	<para>Digital TV symbol rate, in bauds (symbols/second). Used on cable standards.</para>
+	</section>
+	<section id="DTV-INNER-FEC">
+	<title><constant>DTV_INNER_FEC</constant></title>
+	<para>Used cable/satellite transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+	FEC_2_5,
+} fe_code_rate_t;
+	</programlisting>
+	<para>which correspond to error correction rates of 1/2, 2/3, etc.,
+	no error correction or auto detection.</para>
+	</section>
+	<section id="DTV-VOLTAGE">
+	<title><constant>DTV_VOLTAGE</constant></title>
+	<para>The voltage is usually used with non-DiSEqC capable LNBs to switch
+	the polarzation (horizontal/vertical). When using DiSEqC epuipment this
+	voltage has to be switched consistently to the DiSEqC commands as
+	described in the DiSEqC spec.</para>
+	<programlisting>
+		typedef enum fe_sec_voltage {
+		SEC_VOLTAGE_13,
+		SEC_VOLTAGE_18
+		} fe_sec_voltage_t;
+	</programlisting>
+	</section>
+	<section id="DTV-TONE">
+	<title><constant>DTV_TONE</constant></title>
+	<para>Currently not used.</para>
+	</section>
+	<section id="DTV-PILOT">
+	<title><constant>DTV_PILOT</constant></title>
+	<para>Sets DVB-S2 pilot</para>
+	<section id="fe-pilot-t">
+		<title>fe_pilot type</title>
+		<programlisting>
+typedef enum fe_pilot {
+	PILOT_ON,
+	PILOT_OFF,
+	PILOT_AUTO,
+} fe_pilot_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ROLLOFF">
+	<title><constant>DTV_ROLLOFF</constant></title>
+		<para>Sets DVB-S2 rolloff</para>
+
+	<section id="fe-rolloff-t">
+		<title>fe_rolloff type</title>
+		<programlisting>
+typedef enum fe_rolloff {
+	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+	ROLLOFF_20,
+	ROLLOFF_25,
+	ROLLOFF_AUTO,
+} fe_rolloff_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-DISEQC-SLAVE-REPLY">
+	<title><constant>DTV_DISEQC_SLAVE_REPLY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY-COUNT">
+	<title><constant>DTV_FE_CAPABILITY_COUNT</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY">
+	<title><constant>DTV_FE_CAPABILITY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-DELIVERY-SYSTEM">
+		<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
+		<para>Specifies the type of Delivery system</para>
+		<section id="fe-delivery-system-t">
+		<title>fe_delivery_system type</title>
+		<para>Possible values: </para>
+<programlisting>
+
+typedef enum fe_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBC_ANNEX_A,
+	SYS_DVBC_ANNEX_B,
+	SYS_DVBT,
+	SYS_DSS,
+	SYS_DVBS,
+	SYS_DVBS2,
+	SYS_DVBH,
+	SYS_ISDBT,
+	SYS_ISDBS,
+	SYS_ISDBC,
+	SYS_ATSC,
+	SYS_ATSCMH,
+	SYS_DTMB,
+	SYS_CMMB,
+	SYS_DAB,
+	SYS_DVBT2,
+	SYS_TURBO,
+	SYS_DVBC_ANNEX_C,
+} fe_delivery_system_t;
+</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ISDBT-PARTIAL-RECEPTION">
+		<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>
+
+		<para>If <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
+			the channel is in partial reception mode or not.</para>
+
+		<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
+			<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>
+
+		<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
+			is consisting of one segment and layer or three segments and two layers.</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SOUND-BROADCASTING">
+		<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>
+
+		<para>This field represents whether the other DTV_ISDBT_*-parameters are
+			referring to an ISDB-T and an ISDB-Tsb channel. (See also
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SUBCHANNEL-ID">
+		<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>
+
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+
+		<para>(Note of the author: This might not be the correct description of the
+			<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
+			background needed to program a device)</para>
+
+		<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
+			set of connected ISDB-Tsb channels. In this set of channels every
+			channel can be received independently. The number of connected
+			ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
+			bandwidth available.</para>
+
+		<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
+			broadcaster has several possibilities to put those channels in the
+			air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
+			segments from position 1-8 to 5-13 or anything in between.</para>
+
+		<para>The underlying layer of segments are subchannels: each segment is
+			consisting of several subchannels with a predefined IDs. A sub-channel
+			is used to help the demodulator to synchronize on the channel.</para>
+
+		<para>An ISDB-T channel is always centered over all sub-channels. As for
+			the example above, in ISDB-Tsb it is no longer as simple as that.</para>
+
+		<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
+			sub-channel ID of the segment to be demodulated.</para>
+
+		<para>Possible values: 0 .. 41, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-IDX">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
+			demodulated for an ISDB-Tsb channel where several of them are
+			transmitted in the connected manner.</para>
+		<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-COUNT">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
+			channels.</para>
+		<para>Possible values: 1 .. 13</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="isdb-hierq-layers">
+		<title><constant>DTV-ISDBT-LAYER*</constant> parameters</title>
+		<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
+			ISDB-T hierarchical layers can be decoded simultaneously. For that
+			reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.</para>
+		<para>ISDB-T has 3 hierarchical layers which each can use a part of the
+			available segments. The total number of segments over all layers has
+			to 13 in ISDB-T.</para>
+		<para>There are 3 parameter sets, for Layers A, B and C.</para>
+		<section id="DTV-ISDBT-LAYER-ENABLED">
+			<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>
+			<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
+				layers in the decoding process. Setting all bits of
+				<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
+				demodulated. This is the default.</para>
+			<para>If the channel is in the partial reception mode
+				(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
+				independently of the other 12 segments. In that mode layer A has to
+				have a <constant>SEGMENT_COUNT</constant> of 1.</para>
+			<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
+				according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
+				accordingly.</para>
+			<para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-FEC">
+			<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>
+			<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-MODULATION">
+			<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>
+			<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>
+			<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
+				and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-SEGMENT-COUNT">
+			<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>
+			<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>
+			<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
+				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>
+			<informaltable id="isdbt-layer_seg-cnt-table">
+				<tgroup cols="6">
+					<tbody>
+						<row>
+							<entry>PR</entry>
+							<entry>SB</entry>
+							<entry>Layer A width</entry>
+							<entry>Layer B width</entry>
+							<entry>Layer C width</entry>
+							<entry>total width</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>2</entry>
+							<entry>0</entry>
+							<entry>13</entry>
+						</row>
+					</tbody>
+				</tgroup>
+			</informaltable>
+		</section>
+		<section id="DTV-ISDBT-LAYER-TIME-INTERLEAVING">
+			<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>
+			<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>
+			<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
+				here are referring to what can be found in the TMCC-structure -
+				independent of the mode.</para>
+		</section>
+		<section id="DTV-ATSCMH-FIC-VER">
+			<title><constant>DTV_ATSCMH_FIC_VER</constant></title>
+			<para>Version number of the FIC (Fast Information Channel) signaling data.</para>
+			<para>FIC is used for relaying information to allow rapid service acquisition by the receiver.</para>
+			<para>Possible values: 0, 1, 2, 3, ..., 30, 31</para>
+		</section>
+		<section id="DTV-ATSCMH-PARADE-ID">
+			<title><constant>DTV_ATSCMH_PARADE_ID</constant></title>
+			<para>Parade identification number</para>
+			<para>A parade is a collection of up to eight MH groups, conveying one or two ensembles.</para>
+			<para>Possible values: 0, 1, 2, 3, ..., 126, 127</para>
+		</section>
+		<section id="DTV-ATSCMH-NOG">
+			<title><constant>DTV_ATSCMH_NOG</constant></title>
+			<para>Number of MH groups per MH subframe for a designated parade.</para>
+			<para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para>
+		</section>
+		<section id="DTV-ATSCMH-TNOG">
+			<title><constant>DTV_ATSCMH_TNOG</constant></title>
+			<para>Total number of MH groups including all MH groups belonging to all MH parades in one MH subframe.</para>
+			<para>Possible values: 0, 1, 2, 3, ..., 30, 31</para>
+		</section>
+		<section id="DTV-ATSCMH-SGN">
+			<title><constant>DTV_ATSCMH_SGN</constant></title>
+			<para>Start group number.</para>
+			<para>Possible values: 0, 1, 2, 3, ..., 14, 15</para>
+		</section>
+		<section id="DTV-ATSCMH-PRC">
+			<title><constant>DTV_ATSCMH_PRC</constant></title>
+			<para>Parade repetition cycle.</para>
+			<para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para>
+		</section>
+		<section id="DTV-ATSCMH-RS-FRAME-MODE">
+			<title><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></title>
+			<para>RS frame mode.</para>
+			<para>Possible values are:</para>
+		  <para id="atscmh-rs-frame-mode">
+<programlisting>
+typedef enum atscmh_rs_frame_mode {
+	ATSCMH_RSFRAME_PRI_ONLY  = 0,
+	ATSCMH_RSFRAME_PRI_SEC   = 1,
+} atscmh_rs_frame_mode_t;
+</programlisting>
+		  </para>
+		</section>
+		<section id="DTV-ATSCMH-RS-FRAME-ENSEMBLE">
+			<title><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></title>
+			<para>RS frame ensemble.</para>
+			<para>Possible values are:</para>
+		  <para id="atscmh-rs-frame-ensemble">
+<programlisting>
+typedef enum atscmh_rs_frame_ensemble {
+	ATSCMH_RSFRAME_ENS_PRI   = 0,
+	ATSCMH_RSFRAME_ENS_SEC   = 1,
+} atscmh_rs_frame_ensemble_t;
+</programlisting>
+		  </para>
+		</section>
+		<section id="DTV-ATSCMH-RS-CODE-MODE-PRI">
+			<title><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></title>
+			<para>RS code mode (primary).</para>
+			<para>Possible values are:</para>
+		  <para id="atscmh-rs-code-mode">
+<programlisting>
+typedef enum atscmh_rs_code_mode {
+	ATSCMH_RSCODE_211_187    = 0,
+	ATSCMH_RSCODE_223_187    = 1,
+	ATSCMH_RSCODE_235_187    = 2,
+} atscmh_rs_code_mode_t;
+</programlisting>
+		  </para>
+		</section>
+		<section id="DTV-ATSCMH-RS-CODE-MODE-SEC">
+			<title><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></title>
+			<para>RS code mode (secondary).</para>
+			<para>Possible values are:</para>
+<programlisting>
+typedef enum atscmh_rs_code_mode {
+	ATSCMH_RSCODE_211_187    = 0,
+	ATSCMH_RSCODE_223_187    = 1,
+	ATSCMH_RSCODE_235_187    = 2,
+} atscmh_rs_code_mode_t;
+</programlisting>
+		</section>
+		<section id="DTV-ATSCMH-SCCC-BLOCK-MODE">
+			<title><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></title>
+			<para>Series Concatenated Convolutional Code Block Mode.</para>
+			<para>Possible values are:</para>
+		  <para id="atscmh-sccc-block-mode">
+<programlisting>
+typedef enum atscmh_sccc_block_mode {
+	ATSCMH_SCCC_BLK_SEP      = 0,
+	ATSCMH_SCCC_BLK_COMB     = 1,
+} atscmh_sccc_block_mode_t;
+</programlisting>
+		  </para>
+		</section>
+		<section id="DTV-ATSCMH-SCCC-CODE-MODE-A">
+			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></title>
+			<para>Series Concatenated Convolutional Code Rate.</para>
+			<para>Possible values are:</para>
+		  <para id="atscmh-sccc-code-mode">
+<programlisting>
+typedef enum atscmh_sccc_code_mode {
+	ATSCMH_SCCC_CODE_HLF     = 0,
+	ATSCMH_SCCC_CODE_QTR     = 1,
+} atscmh_sccc_code_mode_t;
+</programlisting>
+		  </para>
+		</section>
+		<section id="DTV-ATSCMH-SCCC-CODE-MODE-B">
+			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></title>
+			<para>Series Concatenated Convolutional Code Rate.</para>
+			<para>Possible values are:</para>
+<programlisting>
+typedef enum atscmh_sccc_code_mode {
+	ATSCMH_SCCC_CODE_HLF     = 0,
+	ATSCMH_SCCC_CODE_QTR     = 1,
+} atscmh_sccc_code_mode_t;
+</programlisting>
+		</section>
+		<section id="DTV-ATSCMH-SCCC-CODE-MODE-C">
+			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></title>
+			<para>Series Concatenated Convolutional Code Rate.</para>
+			<para>Possible values are:</para>
+<programlisting>
+typedef enum atscmh_sccc_code_mode {
+	ATSCMH_SCCC_CODE_HLF     = 0,
+	ATSCMH_SCCC_CODE_QTR     = 1,
+} atscmh_sccc_code_mode_t;
+</programlisting>
+		</section>
+		<section id="DTV-ATSCMH-SCCC-CODE-MODE-D">
+			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></title>
+			<para>Series Concatenated Convolutional Code Rate.</para>
+			<para>Possible values are:</para>
+<programlisting>
+typedef enum atscmh_sccc_code_mode {
+	ATSCMH_SCCC_CODE_HLF     = 0,
+	ATSCMH_SCCC_CODE_QTR     = 1,
+} atscmh_sccc_code_mode_t;
+</programlisting>
+		</section>
+	</section>
+	<section id="DTV-API-VERSION">
+	<title><constant>DTV_API_VERSION</constant></title>
+	<para>Returns the major/minor version of the DVB API</para>
+	</section>
+	<section id="DTV-CODE-RATE-HP">
+	<title><constant>DTV_CODE_RATE_HP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-CODE-RATE-LP">
+	<title><constant>DTV_CODE_RATE_LP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-GUARD-INTERVAL">
+		<title><constant>DTV_GUARD_INTERVAL</constant></title>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+	GUARD_INTERVAL_PN420,
+	GUARD_INTERVAL_PN595,
+	GUARD_INTERVAL_PN945,
+} fe_guard_interval_t;
+</programlisting>
+
+		<para>Notes:</para>
+		<para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
+			try to find the correct guard interval (if capable) and will use TMCC to fill
+			in the missing parameters.</para>
+		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
+		<para>3) DTMB specifies PN420, PN595 and PN945.</para>
+	</section>
+	<section id="DTV-TRANSMISSION-MODE">
+		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
+
+		<para>Specifies the number of carriers used by the standard</para>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+	TRANSMISSION_MODE_C1,
+	TRANSMISSION_MODE_C3780,
+} fe_transmit_mode_t;
+</programlisting>
+		<para>Notes:</para>
+		<para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+			'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
+
+		<para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
+			hardware will try to find the correct FFT-size (if capable) and will
+			use TMCC to fill in the missing parameters.</para>
+		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
+		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
+		<para>5) DTMB specifies C1 and C3780.</para>
+	</section>
+	<section id="DTV-HIERARCHY">
+	<title><constant>DTV_HIERARCHY</constant></title>
+	<para>Frontend hierarchy</para>
+	<programlisting>
+typedef enum fe_hierarchy {
+	 HIERARCHY_NONE,
+	 HIERARCHY_1,
+	 HIERARCHY_2,
+	 HIERARCHY_4,
+	 HIERARCHY_AUTO
+ } fe_hierarchy_t;
+	</programlisting>
+	</section>
+	<section id="DTV-STREAM-ID">
+	<title><constant>DTV_STREAM_ID</constant></title>
+	<para>DVB-S2, DVB-T2 and ISDB-S support the transmission of several
+	      streams on a single transport stream.
+	      This property enables the DVB driver to handle substream filtering,
+	      when supported by the hardware.
+	      By default, substream filtering is disabled.
+	</para><para>
+	      For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+	</para><para>
+	      For ISDB, the valid substream id range is from 1 to 65535.
+	</para><para>
+	      To disable it, you should use the special macro NO_STREAM_ID_FILTER.
+	</para><para>
+	      Note: any value outside the id range also disables filtering.
+	</para>
+	</section>
+	<section id="DTV-DVBT2-PLP-ID-LEGACY">
+		<title><constant>DTV_DVBT2_PLP_ID_LEGACY</constant></title>
+		<para>Obsolete, replaced with DTV_STREAM_ID.</para>
+	</section>
+	<section id="DTV-ENUM-DELSYS">
+		<title><constant>DTV_ENUM_DELSYS</constant></title>
+		<para>A Multi standard frontend needs to advertise the delivery systems provided.
+			Applications need to enumerate the provided delivery systems, before using
+			any other operation with the frontend. Prior to it's introduction,
+			FE_GET_INFO was used to determine a frontend type. A frontend which
+			provides more than a single delivery system, FE_GET_INFO doesn't help much.
+			Applications which intends to use a multistandard frontend must enumerate
+			the delivery systems associated with it, rather than trying to use
+			FE_GET_INFO. In the case of a legacy frontend, the result is just the same
+			as with FE_GET_INFO, but in a more structured format </para>
+	</section>
+	<section id="DTV-INTERLEAVING">
+	<title><constant>DTV_INTERLEAVING</constant></title>
+	<para id="fe-interleaving">Interleaving mode</para>
+	<programlisting>
+enum fe_interleaving {
+	INTERLEAVING_NONE,
+	INTERLEAVING_AUTO,
+	INTERLEAVING_240,
+	INTERLEAVING_720,
+};
+	</programlisting>
+	</section>
+	<section id="DTV-LNA">
+	<title><constant>DTV_LNA</constant></title>
+	<para>Low-noise amplifier.</para>
+	<para>Hardware might offer controllable LNA which can be set manually
+		using that parameter. Usually LNA could be found only from
+		terrestrial devices if at all.</para>
+	<para>Possible values: 0, 1, LNA_AUTO</para>
+	<para>0, LNA off</para>
+	<para>1, LNA on</para>
+	<para>use the special macro LNA_AUTO to set LNA auto</para>
+	</section>
+</section>
+
+	<section id="frontend-stat-properties">
+	<title>Frontend statistics indicators</title>
+	<para>The values are returned via <constant>dtv_property.stat</constant>.
+	      If the property is supported, <constant>dtv_property.stat.len</constant> is bigger than zero.</para>
+	<para>For most delivery systems, <constant>dtv_property.stat.len</constant>
+	      will be 1 if the stats is supported, and the properties will
+	      return a single value for each parameter.</para>
+	<para>It should be noticed, however, that new OFDM delivery systems
+	      like ISDB can use different modulation types for each group of
+	      carriers. On such standards, up to 3 groups of statistics can be
+	      provided, and <constant>dtv_property.stat.len</constant> is updated
+	      to reflect the "global" metrics, plus one metric per each carrier
+	      group (called "layer" on ISDB).</para>
+	<para>So, in order to be consistent with other delivery systems, the first
+	      value at <link linkend="dtv-stats"><constant>dtv_property.stat.dtv_stats</constant></link>
+	      array refers to the global metric. The other elements of the array
+	      represent each layer, starting from layer A(index 1),
+	      layer B (index 2) and so on.</para>
+	<para>The number of filled elements are stored at <constant>dtv_property.stat.len</constant>.</para>
+	<para>Each element of the <constant>dtv_property.stat.dtv_stats</constant> array consists on two elements:</para>
+	<itemizedlist mark='opencircle'>
+		<listitem><para><constant>svalue</constant> or <constant>uvalue</constant>, where
+			<constant>svalue</constant> is for signed values of the measure (dB measures)
+			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
+		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
+			<itemizedlist mark='bullet' id="fecap-scale-params">
+				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
+				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
+				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
+				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
+			</itemizedlist>
+		</listitem>
+	</itemizedlist>
+	<section id="DTV-STAT-SIGNAL-STRENGTH">
+		<title><constant>DTV_STAT_SIGNAL_STRENGTH</constant></title>
+		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-CNR">
+		<title><constant>DTV_STAT_CNR</constant></title>
+		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-PRE-TOTAL-BIT-COUNT"><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received before the inner code block, during the same period as
+		<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></title>
+		<para>Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code).</para>
+		<para>This measure is taken during the same interval as <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant>.</para>
+		<para>In order to get the BER (Bit Error Rate) measurement, it should be divided by
+		<link linkend="DTV-STAT-POST-TOTAL-BIT-COUNT"><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></link>.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
+		<title><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></title>
+		<para>Measures the amount of bits received after the inner coding, during the same period as
+		<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
+		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
+		<title><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></title>
+		<para>Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code).</para>
+		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
+		      The frontend may reset it when a channel/transponder is tuned.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
+		<title><constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant></title>
+		<para>Measures the total number of blocks received during the same period as
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> measurement was taken.</para>
+		<para>It can be used to calculate the PER indicator, by dividing
+		<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>
+		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
+		<para>Possible scales for this metric are:</para>
+		<itemizedlist mark='bullet'>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+
+	<section id="frontend-property-terrestrial-systems">
+	<title>Properties used on terrestrial delivery systems</title>
+		<section id="dvbt-params">
+			<title>DVB-T delivery system</title>
+			<para>The following parameters are valid for DVB-T:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
+			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+		<section id="dvbt2-params">
+			<title>DVB-T2 delivery system</title>
+			<para>DVB-T2 support is currently in the early stages
+			of development, so expect that this section maygrow and become
+			more detailed with time.</para>
+		<para>The following parameters are valid for DVB-T2:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+		<section id="isdbt">
+		<title>ISDB-T delivery system</title>
+		<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
+			needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
+			that some very sophisticated devices won't need certain parameters to
+			tune.</para>
+		<para>The information given here should help application writers to know how
+			to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>
+		<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
+			basically show the dependencies between the needed parameter values,
+			but surely some information is left out. For more detailed information
+			see the following documents:</para>
+		<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
+			Television Broadcasting" and</para>
+		<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
+			Television Broadcasting".</para>
+		<para>In order to understand the ISDB specific parameters,
+			one has to have some knowledge the channel structure in
+			ISDB-T and ISDB-Tsb. I.e. it has to be known to
+			the reader that an ISDB-T channel consists of 13 segments,
+			that it can have up to 3 layer sharing those segments,
+			and things like that.</para>
+		<para>The following parameters are valid for ISDB-T:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SUBCHANNEL-ID"><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-IDX"><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-COUNT"><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERA_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERA_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERA_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERB_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERB_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERB_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERC_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERC_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+		<section id="atsc-params">
+			<title>ATSC delivery system</title>
+			<para>The following parameters are valid for ATSC:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+		<section id="atscmh-params">
+			<title>ATSC-MH delivery system</title>
+			<para>The following parameters are valid for ATSC-MH:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-FIC-VER"><constant>DTV_ATSCMH_FIC_VER</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-PARADE-ID"><constant>DTV_ATSCMH_PARADE_ID</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-NOG"><constant>DTV_ATSCMH_NOG</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-TNOG"><constant>DTV_ATSCMH_TNOG</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SGN"><constant>DTV_ATSCMH_SGN</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-PRC"><constant>DTV_ATSCMH_PRC</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-MODE"><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-ENSEMBLE"><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-PRI"><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-SEC"><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-BLOCK-MODE"><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-A"><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-B"><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem>
+			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+		<section id="dtmb-params">
+			<title>DTMB delivery system</title>
+			<para>The following parameters are valid for DTMB:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
+			</itemizedlist>
+			<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		</section>
+	</section>
+	<section id="frontend-property-cable-systems">
+	<title>Properties used on cable delivery systems</title>
+	<section id="dvbc-params">
+		<title>DVB-C delivery system</title>
+		<para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para>
+		<para>The following parameters are valid for DVB-C Annex A/C:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+	</section>
+	<section id="dvbc-annex-b-params">
+		<title>DVB-C Annex B delivery system</title>
+		<para>The DVB-C Annex-B is only used on a few Countries like the United States.</para>
+		<para>The following parameters are valid for DVB-C Annex B:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+	</section>
+	</section>
+	<section id="frontend-property-satellital-systems">
+	<title>Properties used on satellital delivery systems</title>
+	<section id="dvbs-params">
+		<title>DVB-S delivery system</title>
+		<para>The following parameters are valid for DVB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+		<para>Future implementations might add those two missing parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="dvbs2-params">
+		<title>DVB-S2 delivery system</title>
+		<para>In addition to all parameters valid for DVB-S, DVB-S2 supports the following parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
+		</itemizedlist>
+		<para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para>
+	</section>
+	<section id="turbo-params">
+		<title>Turbo code delivery system</title>
+		<para>In addition to all parameters valid for DVB-S, turbo code supports the following parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="isdbs-params">
+		<title>ISDB-S delivery system</title>
+		<para>The following parameters are valid for ISDB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+</section>

linux-imx/Documentation/DocBook/media/dvb/dvbstb.pdf

diff --git a/linux-imx/Documentation/DocBook/media/dvb/dvbstb.pdf b/linux-imx/Documentation/DocBook/media/dvb/dvbstb.pdf
new file mode 100644
index 0000000..0fa75d9
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/dvbstb.pdf
Binary files differ

linux-imx/Documentation/DocBook/media/dvb/examples.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/examples.xml b/linux-imx/Documentation/DocBook/media/dvb/examples.xml
new file mode 100644
index 0000000..f037e56
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/examples.xml
@@ -0,0 +1,365 @@
+<title>Examples</title>
+<para>In this section we would like to present some examples for using the DVB API.
+</para>
+<para>Maintainer note: This section is out of date. Please refer to the sample programs packaged
+with the driver distribution from <ulink url="http://linuxtv.org/hg/dvb-apps" />.
+</para>
+
+<section id="tuning">
+<title>Tuning</title>
+<para>We will start with a generic tuning subroutine that uses the frontend and SEC, as well as
+the demux devices. The example is given for QPSK tuners, but can easily be adjusted for
+QAM.
+</para>
+<programlisting>
+ #include &#x003C;sys/ioctl.h&#x003E;
+ #include &#x003C;stdio.h&#x003E;
+ #include &#x003C;stdint.h&#x003E;
+ #include &#x003C;sys/types.h&#x003E;
+ #include &#x003C;sys/stat.h&#x003E;
+ #include &#x003C;fcntl.h&#x003E;
+ #include &#x003C;time.h&#x003E;
+ #include &#x003C;unistd.h&#x003E;
+
+ #include &#x003C;linux/dvb/dmx.h&#x003E;
+ #include &#x003C;linux/dvb/frontend.h&#x003E;
+ #include &#x003C;linux/dvb/sec.h&#x003E;
+ #include &#x003C;sys/poll.h&#x003E;
+
+ #define DMX "/dev/dvb/adapter0/demux1"
+ #define FRONT "/dev/dvb/adapter0/frontend1"
+ #define SEC "/dev/dvb/adapter0/sec1"
+
+ /&#x22C6; routine for checking if we have a signal and other status information&#x22C6;/
+ int FEReadStatus(int fd, fe_status_t &#x22C6;stat)
+ {
+	 int ans;
+
+	 if ( (ans = ioctl(fd,FE_READ_STATUS,stat) &#x003C; 0)){
+		 perror("FE READ STATUS: ");
+		 return -1;
+	 }
+
+	 if (&#x22C6;stat &amp; FE_HAS_POWER)
+		 printf("FE HAS POWER\n");
+
+	 if (&#x22C6;stat &amp; FE_HAS_SIGNAL)
+		 printf("FE HAS SIGNAL\n");
+
+	 if (&#x22C6;stat &amp; FE_SPECTRUM_INV)
+		 printf("SPEKTRUM INV\n");
+
+	 return 0;
+ }
+
+
+ /&#x22C6; tune qpsk &#x22C6;/
+ /&#x22C6; freq:             frequency of transponder                      &#x22C6;/
+ /&#x22C6; vpid, apid, tpid: PIDs of video, audio and teletext TS packets  &#x22C6;/
+ /&#x22C6; diseqc:           DiSEqC address of the used LNB                &#x22C6;/
+ /&#x22C6; pol:              Polarisation                                  &#x22C6;/
+ /&#x22C6; srate:            Symbol Rate                                   &#x22C6;/
+ /&#x22C6; fec.              FEC                                           &#x22C6;/
+ /&#x22C6; lnb_lof1:         local frequency of lower LNB band             &#x22C6;/
+ /&#x22C6; lnb_lof2:         local frequency of upper LNB band             &#x22C6;/
+ /&#x22C6; lnb_slof:         switch frequency of LNB                       &#x22C6;/
+
+ int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
+		 int diseqc, int pol, int srate, int fec, int lnb_lof1,
+		 int lnb_lof2, int lnb_slof)
+ {
+	 struct secCommand scmd;
+	 struct secCmdSequence scmds;
+	 struct dmx_pes_filter_params pesFilterParams;
+	 FrontendParameters frp;
+	 struct pollfd pfd[1];
+	 FrontendEvent event;
+	 int demux1, demux2, demux3, front;
+
+	 frequency = (uint32_t) freq;
+	 symbolrate = (uint32_t) srate;
+
+	 if((front = open(FRONT,O_RDWR)) &#x003C; 0){
+		 perror("FRONTEND DEVICE: ");
+		 return -1;
+	 }
+
+	 if((sec = open(SEC,O_RDWR)) &#x003C; 0){
+		 perror("SEC DEVICE: ");
+		 return -1;
+	 }
+
+	 if (demux1 &#x003C; 0){
+		 if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux2 &#x003C; 0){
+		 if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux3 &#x003C; 0){
+		 if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (freq &#x003C; lnb_slof) {
+		 frp.Frequency = (freq - lnb_lof1);
+		 scmds.continuousTone = SEC_TONE_OFF;
+	 } else {
+		 frp.Frequency = (freq - lnb_lof2);
+		 scmds.continuousTone = SEC_TONE_ON;
+	 }
+	 frp.Inversion = INVERSION_AUTO;
+	 if (pol) scmds.voltage = SEC_VOLTAGE_18;
+	 else scmds.voltage = SEC_VOLTAGE_13;
+
+	 scmd.type=0;
+	 scmd.u.diseqc.addr=0x10;
+	 scmd.u.diseqc.cmd=0x38;
+	 scmd.u.diseqc.numParams=1;
+	 scmd.u.diseqc.params[0] = 0xF0 | ((diseqc &#x22C6; 4) &amp; 0x0F) |
+		 (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
+		 (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
+
+	 scmds.miniCommand=SEC_MINI_NONE;
+	 scmds.numCommands=1;
+	 scmds.commands=&amp;scmd;
+	 if (ioctl(sec, SEC_SEND_SEQUENCE, &amp;scmds) &#x003C; 0){
+		 perror("SEC SEND: ");
+		 return -1;
+	 }
+
+	 if (ioctl(sec, SEC_SEND_SEQUENCE, &amp;scmds) &#x003C; 0){
+		 perror("SEC SEND: ");
+		 return -1;
+	 }
+
+	 frp.u.qpsk.SymbolRate = srate;
+	 frp.u.qpsk.FEC_inner = fec;
+
+	 if (ioctl(front, FE_SET_FRONTEND, &amp;frp) &#x003C; 0){
+		 perror("QPSK TUNE: ");
+		 return -1;
+	 }
+
+	 pfd[0].fd = front;
+	 pfd[0].events = POLLIN;
+
+	 if (poll(pfd,1,3000)){
+		 if (pfd[0].revents &amp; POLLIN){
+			 printf("Getting QPSK event\n");
+			 if ( ioctl(front, FE_GET_EVENT, &amp;event)
+
+			      == -EOVERFLOW){
+				 perror("qpsk get event");
+				 return -1;
+			 }
+			 printf("Received ");
+			 switch(event.type){
+			 case FE_UNEXPECTED_EV:
+				 printf("unexpected event\n");
+				 return -1;
+			 case FE_FAILURE_EV:
+				 printf("failure event\n");
+				 return -1;
+
+			 case FE_COMPLETION_EV:
+				 printf("completion event\n");
+			 }
+		 }
+	 }
+
+
+	 pesFilterParams.pid     = vpid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_VIDEO;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux1, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_vpid");
+		 return -1;
+	 }
+
+	 pesFilterParams.pid     = apid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_AUDIO;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux2, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_apid");
+		 return -1;
+	 }
+
+	 pesFilterParams.pid     = tpid;
+	 pesFilterParams.input   = DMX_IN_FRONTEND;
+	 pesFilterParams.output  = DMX_OUT_DECODER;
+	 pesFilterParams.pes_type = DMX_PES_TELETEXT;
+	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
+	 if (ioctl(demux3, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("set_tpid");
+		 return -1;
+	 }
+
+	 return has_signal(fds);
+ }
+
+</programlisting>
+<para>The program assumes that you are using a universal LNB and a standard DiSEqC
+switch with up to 4 addresses. Of course, you could build in some more checking if
+tuning was successful and maybe try to repeat the tuning process. Depending on the
+external hardware, i.e. LNB and DiSEqC switch, and weather conditions this may be
+necessary.
+</para>
+</section>
+
+<section id="the_dvr_device">
+<title>The DVR device</title>
+<para>The following program code shows how to use the DVR device for recording.
+</para>
+<programlisting>
+ #include &#x003C;sys/ioctl.h&#x003E;
+ #include &#x003C;stdio.h&#x003E;
+ #include &#x003C;stdint.h&#x003E;
+ #include &#x003C;sys/types.h&#x003E;
+ #include &#x003C;sys/stat.h&#x003E;
+ #include &#x003C;fcntl.h&#x003E;
+ #include &#x003C;time.h&#x003E;
+ #include &#x003C;unistd.h&#x003E;
+
+ #include &#x003C;linux/dvb/dmx.h&#x003E;
+ #include &#x003C;linux/dvb/video.h&#x003E;
+ #include &#x003C;sys/poll.h&#x003E;
+ #define DVR "/dev/dvb/adapter0/dvr1"
+ #define AUDIO "/dev/dvb/adapter0/audio1"
+ #define VIDEO "/dev/dvb/adapter0/video1"
+
+ #define BUFFY (188&#x22C6;20)
+ #define MAX_LENGTH (1024&#x22C6;1024&#x22C6;5) /&#x22C6; record 5MB &#x22C6;/
+
+
+ /&#x22C6; switch the demuxes to recording, assuming the transponder is tuned &#x22C6;/
+
+ /&#x22C6; demux1, demux2: file descriptor of video and audio filters &#x22C6;/
+ /&#x22C6; vpid, apid:     PIDs of video and audio channels           &#x22C6;/
+
+ int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+ {
+	 struct dmx_pes_filter_params pesFilterParams;
+
+	 if (demux1 &#x003C; 0){
+		 if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 if (demux2 &#x003C; 0){
+		 if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
+		     &#x003C; 0){
+			 perror("DEMUX DEVICE: ");
+			 return -1;
+		 }
+	 }
+
+	 pesFilterParams.pid = vpid;
+	 pesFilterParams.input = DMX_IN_FRONTEND;
+	 pesFilterParams.output = DMX_OUT_TS_TAP;
+	 pesFilterParams.pes_type = DMX_PES_VIDEO;
+	 pesFilterParams.flags = DMX_IMMEDIATE_START;
+	 if (ioctl(demux1, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("DEMUX DEVICE");
+		 return -1;
+	 }
+	 pesFilterParams.pid = apid;
+	 pesFilterParams.input = DMX_IN_FRONTEND;
+	 pesFilterParams.output = DMX_OUT_TS_TAP;
+	 pesFilterParams.pes_type = DMX_PES_AUDIO;
+	 pesFilterParams.flags = DMX_IMMEDIATE_START;
+	 if (ioctl(demux2, DMX_SET_PES_FILTER, &amp;pesFilterParams) &#x003C; 0){
+		 perror("DEMUX DEVICE");
+		 return -1;
+	 }
+	 return 0;
+ }
+
+ /&#x22C6; start recording MAX_LENGTH , assuming the transponder is tuned &#x22C6;/
+
+ /&#x22C6; demux1, demux2: file descriptor of video and audio filters &#x22C6;/
+ /&#x22C6; vpid, apid:     PIDs of video and audio channels           &#x22C6;/
+ int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
+ {
+	 int i;
+	 int len;
+	 int written;
+	 uint8_t buf[BUFFY];
+	 uint64_t length;
+	 struct pollfd pfd[1];
+	 int dvr, dvr_out;
+
+	 /&#x22C6; open dvr device &#x22C6;/
+	 if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) &#x003C; 0){
+			 perror("DVR DEVICE");
+			 return -1;
+	 }
+
+	 /&#x22C6; switch video and audio demuxes to dvr &#x22C6;/
+	 printf ("Switching dvr on\n");
+	 i = switch_to_record(demux1, demux2, vpid, apid);
+	 printf("finished: ");
+
+	 printf("Recording %2.0f MB of test file in TS format\n",
+		MAX_LENGTH/(1024.0&#x22C6;1024.0));
+	 length = 0;
+
+	 /&#x22C6; open output file &#x22C6;/
+	 if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
+				  |O_TRUNC, S_IRUSR|S_IWUSR
+				  |S_IRGRP|S_IWGRP|S_IROTH|
+				  S_IWOTH)) &#x003C; 0){
+		 perror("Can't open file for dvr test");
+		 return -1;
+	 }
+
+	 pfd[0].fd = dvr;
+	 pfd[0].events = POLLIN;
+
+	 /&#x22C6; poll for dvr data and write to file &#x22C6;/
+	 while (length &#x003C; MAX_LENGTH ) {
+		 if (poll(pfd,1,1)){
+			 if (pfd[0].revents &amp; POLLIN){
+				 len = read(dvr, buf, BUFFY);
+				 if (len &#x003C; 0){
+					 perror("recording");
+					 return -1;
+				 }
+				 if (len &#x003E; 0){
+					 written = 0;
+					 while (written &#x003C; len)
+						 written +=
+							 write (dvr_out,
+								buf, len);
+					 length += len;
+					 printf("written %2.0f MB\r",
+						length/1024./1024.);
+				 }
+			 }
+		 }
+	 }
+	 return 0;
+ }
+
+</programlisting>
+
+</section>

linux-imx/Documentation/DocBook/media/dvb/frontend.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/frontend.xml b/linux-imx/Documentation/DocBook/media/dvb/frontend.xml
new file mode 100644
index 0000000..df39ba3
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/frontend.xml
@@ -0,0 +1,1548 @@
+<title>DVB Frontend API</title>
+
+<para>The DVB frontend device controls the tuner and DVB demodulator
+hardware. It can be accessed through <emphasis
+role="tt">/dev/dvb/adapter0/frontend0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis
+role="tt">linux/dvb/frontend.h</emphasis> in your application.</para>
+
+<para>DVB frontends come in three varieties: DVB-S (satellite), DVB-C
+(cable) and DVB-T (terrestrial). Transmission via the internet (DVB-IP)
+is not yet handled by this API but a future extension is possible. For
+DVB-S the frontend device also supports satellite equipment control
+(SEC) via DiSEqC and V-SEC protocols. The DiSEqC (digital SEC)
+specification is available from
+<ulink url="http://www.eutelsat.com/satellites/4_5_5.html">Eutelsat</ulink>.</para>
+
+<para>Note that the DVB API may also be used for MPEG decoder-only PCI
+cards, in which case there exists no frontend device.</para>
+
+<section id="frontend_types">
+<title>Frontend Data Types</title>
+
+<section id="fe-type-t">
+<title>Frontend type</title>
+
+<para>For historical reasons, frontend types are named by the type of modulation used in
+transmission. The fontend types are given by fe_type_t type, defined as:</para>
+
+<table pgwide="1" frame="none" id="fe-type">
+<title>Frontend types</title>
+<tgroup cols="3">
+   &cs-def;
+   <thead>
+     <row>
+       <entry>fe_type</entry>
+       <entry>Description</entry>
+       <entry><link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> equivalent type</entry>
+     </row>
+  </thead>
+  <tbody valign="top">
+  <row>
+     <entry id="FE_QPSK"><constant>FE_QPSK</constant></entry>
+     <entry>For DVB-S standard</entry>
+     <entry><constant>SYS_DVBS</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_QAM"><constant>FE_QAM</constant></entry>
+     <entry>For DVB-C annex A standard</entry>
+     <entry><constant>SYS_DVBC_ANNEX_A</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
+     <entry>For DVB-T standard</entry>
+     <entry><constant>SYS_DVBT</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_ATSC"><constant>FE_ATSC</constant></entry>
+     <entry>For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used in US.</entry>
+     <entry><constant>SYS_ATSC</constant> (terrestrial) or <constant>SYS_DVBC_ANNEX_B</constant> (cable)</entry>
+  </row>
+</tbody></tgroup></table>
+
+<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
+supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
+</para>
+
+<para>The usage of this field is deprecated, as it doesn't report all supported standards, and
+will provide an incomplete information for frontends that support multiple delivery systems.
+Please use <link linkend="DTV-ENUM-DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
+</section>
+
+<section id="fe-caps-t">
+<title>frontend capabilities</title>
+
+<para>Capabilities describe what a frontend can do. Some capabilities can only be supported for
+a specific frontend type.</para>
+<programlisting>
+	typedef enum fe_caps {
+	FE_IS_STUPID                  = 0,
+	FE_CAN_INVERSION_AUTO         = 0x1,
+	FE_CAN_FEC_1_2                = 0x2,
+	FE_CAN_FEC_2_3                = 0x4,
+	FE_CAN_FEC_3_4                = 0x8,
+	FE_CAN_FEC_4_5                = 0x10,
+	FE_CAN_FEC_5_6                = 0x20,
+	FE_CAN_FEC_6_7                = 0x40,
+	FE_CAN_FEC_7_8                = 0x80,
+	FE_CAN_FEC_8_9                = 0x100,
+	FE_CAN_FEC_AUTO               = 0x200,
+	FE_CAN_QPSK                   = 0x400,
+	FE_CAN_QAM_16                 = 0x800,
+	FE_CAN_QAM_32                 = 0x1000,
+	FE_CAN_QAM_64                 = 0x2000,
+	FE_CAN_QAM_128                = 0x4000,
+	FE_CAN_QAM_256                = 0x8000,
+	FE_CAN_QAM_AUTO               = 0x10000,
+	FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
+	FE_CAN_BANDWIDTH_AUTO         = 0x40000,
+	FE_CAN_GUARD_INTERVAL_AUTO    = 0x80000,
+	FE_CAN_HIERARCHY_AUTO         = 0x100000,
+	FE_CAN_8VSB                   = 0x200000,
+	FE_CAN_16VSB                  = 0x400000,
+	FE_HAS_EXTENDED_CAPS          = 0x800000,
+	FE_CAN_MULTISTREAM            = 0x4000000,
+	FE_CAN_TURBO_FEC              = 0x8000000,
+	FE_CAN_2G_MODULATION          = 0x10000000,
+	FE_NEEDS_BENDING              = 0x20000000,
+	FE_CAN_RECOVER                = 0x40000000,
+	FE_CAN_MUTE_TS                = 0x80000000
+	} fe_caps_t;
+</programlisting>
+</section>
+
+<section id="dvb-frontend-info">
+<title>frontend information</title>
+
+<para>Information about the frontend ca be queried with
+	<link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
+
+<programlisting>
+	struct dvb_frontend_info {
+	char       name[128];
+	fe_type_t  type;
+	uint32_t   frequency_min;
+	uint32_t   frequency_max;
+	uint32_t   frequency_stepsize;
+	uint32_t   frequency_tolerance;
+	uint32_t   symbol_rate_min;
+	uint32_t   symbol_rate_max;
+	uint32_t   symbol_rate_tolerance;     /&#x22C6; ppm &#x22C6;/
+	uint32_t   notifier_delay;            /&#x22C6; ms &#x22C6;/
+	fe_caps_t  caps;
+	};
+</programlisting>
+</section>
+
+<section id="dvb-diseqc-master-cmd">
+<title>diseqc master command</title>
+
+<para>A message sent from the frontend to DiSEqC capable equipment.</para>
+<programlisting>
+	struct dvb_diseqc_master_cmd {
+	uint8_t msg [6]; /&#x22C6;  { framing, address, command, data[3] } &#x22C6;/
+	uint8_t msg_len; /&#x22C6;  valid values are 3...6  &#x22C6;/
+	};
+</programlisting>
+</section>
+<section role="subsection" id="dvb-diseqc-slave-reply">
+<title>diseqc slave reply</title>
+
+<para>A reply to the frontend from DiSEqC 2.0 capable equipment.</para>
+<programlisting>
+	struct dvb_diseqc_slave_reply {
+	uint8_t msg [4]; /&#x22C6;  { framing, data [3] } &#x22C6;/
+	uint8_t msg_len; /&#x22C6;  valid values are 0...4, 0 means no msg  &#x22C6;/
+	int     timeout; /&#x22C6;  return from ioctl after timeout ms with &#x22C6;/
+	};                       /&#x22C6;  errorcode when no message was received  &#x22C6;/
+</programlisting>
+</section>
+
+<section id="fe-sec-voltage-t">
+<title>diseqc slave reply</title>
+<para>The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation
+(horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched
+consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
+<programlisting>
+	typedef enum fe_sec_voltage {
+	SEC_VOLTAGE_13,
+	SEC_VOLTAGE_18
+	} fe_sec_voltage_t;
+</programlisting>
+</section>
+
+<section id="fe-sec-tone-mode-t">
+<title>SEC continuous tone</title>
+
+<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
+high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+	typedef enum fe_sec_tone_mode {
+	SEC_TONE_ON,
+	SEC_TONE_OFF
+	} fe_sec_tone_mode_t;
+</programlisting>
+</section>
+
+<section id="fe-sec-mini-cmd-t">
+<title>SEC tone burst</title>
+
+<para>The 22KHz tone burst is usually used with non-DiSEqC capable switches to select
+between two connected LNBs/satellites. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+	typedef enum fe_sec_mini_cmd {
+	SEC_MINI_A,
+	SEC_MINI_B
+	} fe_sec_mini_cmd_t;
+</programlisting>
+
+<para></para>
+</section>
+
+<section id="fe-status-t">
+<title>frontend status</title>
+<para>Several functions of the frontend device use the fe_status data type defined
+by</para>
+<programlisting>
+typedef enum fe_status {
+	FE_HAS_SIGNAL		= 0x01,
+	FE_HAS_CARRIER		= 0x02,
+	FE_HAS_VITERBI		= 0x04,
+	FE_HAS_SYNC		= 0x08,
+	FE_HAS_LOCK		= 0x10,
+	FE_TIMEDOUT		= 0x20,
+	FE_REINIT		= 0x40,
+} fe_status_t;
+</programlisting>
+<para>to indicate the current state and/or state changes of the frontend hardware:
+</para>
+
+<informaltable><tgroup cols="2"><tbody>
+<row>
+<entry align="char">FE_HAS_SIGNAL</entry>
+<entry align="char">The frontend has found something above the noise level</entry>
+</row><row>
+<entry align="char">FE_HAS_CARRIER</entry>
+<entry align="char">The frontend has found a DVB signal</entry>
+</row><row>
+<entry align="char">FE_HAS_VITERBI</entry>
+<entry align="char">The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable</entry>
+</row><row>
+<entry align="char">FE_HAS_SYNC</entry>
+<entry align="char">Syncronization bytes was found</entry>
+</row><row>
+<entry align="char">FE_HAS_LOCK</entry>
+<entry align="char">The DVB were locked and everything is working</entry>
+</row><row>
+<entry align="char">FE_TIMEDOUT</entry>
+<entry align="char">no lock within the last about 2 seconds</entry>
+</row><row>
+<entry align="char">FE_REINIT</entry>
+<entry align="char">The frontend was reinitialized, application is
+recommended to reset DiSEqC, tone and parameters</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</section>
+
+<section id="dvb-frontend-parameters">
+<title>frontend parameters</title>
+<para>The kind of parameters passed to the frontend device for tuning depend on
+the kind of hardware you are using.</para>
+<para>The struct <constant>dvb_frontend_parameters</constant> uses an
+union with specific per-system parameters. However, as newer delivery systems
+required more data, the structure size weren't enough to fit, and just
+extending its size would break the existing applications. So, those parameters
+were replaced by the usage of <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> ioctl's. The
+new API is flexible enough to add new parameters to existing delivery systems,
+and to add newer delivery systems.</para>
+<para>So, newer applications should use <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in
+order to be able to support the newer System Delivery like  DVB-S2, DVB-T2,
+DVB-C2, ISDB, etc.</para>
+<para>All kinds of parameters are combined as an union in the FrontendParameters structure:
+<programlisting>
+struct dvb_frontend_parameters {
+	uint32_t frequency;     /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
+				/&#x22C6; intermediate frequency in kHz for QPSK &#x22C6;/
+	fe_spectral_inversion_t inversion;
+	union {
+		struct dvb_qpsk_parameters qpsk;
+		struct dvb_qam_parameters  qam;
+		struct dvb_ofdm_parameters ofdm;
+		struct dvb_vsb_parameters  vsb;
+	} u;
+};
+</programlisting></para>
+<para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate
+frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
+the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
+OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz.
+</para>
+
+<section id="dvb-qpsk-parameters">
+<title>QPSK parameters</title>
+<para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_qpsk_parameters {
+	 uint32_t        symbol_rate;  /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+	 fe_code_rate_t  fec_inner;    /&#x22C6; forward error correction (see above) &#x22C6;/
+ };
+</programlisting>
+</section>
+<section id="dvb-qam-parameters">
+<title>QAM parameters</title>
+<para>for cable QAM frontend you use the <constant>dvb_qam_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_qam_parameters {
+	 uint32_t         symbol_rate; /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+	 fe_code_rate_t   fec_inner;   /&#x22C6; forward error correction (see above) &#x22C6;/
+	 fe_modulation_t  modulation;  /&#x22C6; modulation type (see above) &#x22C6;/
+ };
+</programlisting>
+</section>
+<section id="dvb-vsb-parameters">
+<title>VSB parameters</title>
+<para>ATSC frontends are supported by the <constant>dvb_vsb_parameters</constant> structure:</para>
+<programlisting>
+struct dvb_vsb_parameters {
+	fe_modulation_t modulation;	/&#x22C6; modulation type (see above) &#x22C6;/
+};
+</programlisting>
+</section>
+<section id="dvb-ofdm-parameters">
+<title>OFDM parameters</title>
+<para>DVB-T frontends are supported by the <constant>dvb_ofdm_parameters</constant> structure:</para>
+<programlisting>
+ struct dvb_ofdm_parameters {
+	 fe_bandwidth_t      bandwidth;
+	 fe_code_rate_t      code_rate_HP;  /&#x22C6; high priority stream code rate &#x22C6;/
+	 fe_code_rate_t      code_rate_LP;  /&#x22C6; low priority stream code rate &#x22C6;/
+	 fe_modulation_t     constellation; /&#x22C6; modulation type (see above) &#x22C6;/
+	 fe_transmit_mode_t  transmission_mode;
+	 fe_guard_interval_t guard_interval;
+	 fe_hierarchy_t      hierarchy_information;
+ };
+</programlisting>
+</section>
+<section id="fe-spectral-inversion-t">
+<title>frontend spectral inversion</title>
+<para>The Inversion field can take one of these values:
+</para>
+<programlisting>
+typedef enum fe_spectral_inversion {
+	INVERSION_OFF,
+	INVERSION_ON,
+	INVERSION_AUTO
+} fe_spectral_inversion_t;
+</programlisting>
+<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+itself.
+</para>
+</section>
+<section id="fe-code-rate-t">
+<title>frontend code rate</title>
+<para>The possible values for the <constant>fec_inner</constant> field used on
+<link linkend="dvb-qpsk-parameters"><constant>struct dvb_qpsk_parameters</constant></link> and
+<link linkend="dvb-qam-parameters"><constant>struct dvb_qam_parameters</constant></link> are:
+</para>
+<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+</programlisting>
+<para>which correspond to error correction rates of 1/2, 2/3, etc., no error correction or auto
+detection.
+</para>
+</section>
+<section id="fe-modulation-t">
+<title>frontend modulation type for QAM, OFDM and VSB</title>
+<para>For cable and terrestrial frontends, e. g. for
+<link linkend="dvb-qam-parameters"><constant>struct dvb_qpsk_parameters</constant></link>,
+<link linkend="dvb-ofdm-parameters"><constant>struct dvb_qam_parameters</constant></link> and
+<link linkend="dvb-vsb-parameters"><constant>struct dvb_qam_parameters</constant></link>,
+it needs to specify the quadrature modulation mode which can be one of the following:
+</para>
+<programlisting>
+ typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+ } fe_modulation_t;
+</programlisting>
+</section>
+<section>
+<title>More OFDM parameters</title>
+<section id="fe-transmit-mode-t">
+<title>Number of carriers per channel</title>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+ } fe_transmit_mode_t;
+</programlisting>
+</section>
+<section id="fe-bandwidth-t">
+<title>frontend bandwidth</title>
+<programlisting>
+typedef enum fe_bandwidth {
+	BANDWIDTH_8_MHZ,
+	BANDWIDTH_7_MHZ,
+	BANDWIDTH_6_MHZ,
+	BANDWIDTH_AUTO,
+	BANDWIDTH_5_MHZ,
+	BANDWIDTH_10_MHZ,
+	BANDWIDTH_1_712_MHZ,
+} fe_bandwidth_t;
+</programlisting>
+</section>
+<section id="fe-guard-interval-t">
+<title>frontend guard inverval</title>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+</programlisting>
+</section>
+<section id="fe-hierarchy-t">
+<title>frontend hierarchy</title>
+<programlisting>
+typedef enum fe_hierarchy {
+	 HIERARCHY_NONE,
+	 HIERARCHY_1,
+	 HIERARCHY_2,
+	 HIERARCHY_4,
+	 HIERARCHY_AUTO
+ } fe_hierarchy_t;
+</programlisting>
+</section>
+</section>
+
+</section>
+
+<section id="dvb-frontend-event">
+<title>frontend events</title>
+ <programlisting>
+ struct dvb_frontend_event {
+	 fe_status_t status;
+	 struct dvb_frontend_parameters parameters;
+ };
+</programlisting>
+ </section>
+</section>
+
+
+<section id="frontend_fcalls">
+<title>Frontend Function Calls</title>
+
+<section id="frontend_f_open">
+<title>open()</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>This system call opens a named frontend device (/dev/dvb/adapter0/frontend0)
+ for subsequent use. Usually the first thing to do after a successful open is to
+ find out the frontend type with <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
+<para>The device can be opened in read-only mode, which only allows monitoring of
+ device status and statistics, or read/write mode, which allows any kind of use
+ (e.g. performing tuning operations.)
+</para>
+<para>In a system with multiple front-ends, it is usually the case that multiple devices
+ cannot be open in read/write mode simultaneously. As long as a front-end
+ device is opened in read/write mode, other open() calls in read/write mode will
+ either fail or block, depending on whether non-blocking or blocking mode was
+ specified. A front-end device opened in blocking mode can later be put into
+ non-blocking mode (and vice versa) using the F_SETFL command of the fcntl
+ system call. This is a standard system call, documented in the Linux manual
+ page for fcntl. When an open() call has succeeded, the device will be ready
+ for use in the specified mode. This implies that the corresponding hardware is
+ powered up, and that other front-ends may have been powered down to make
+ that possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_f_close">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened front-end device. After closing
+ a front-end device, its corresponding hardware might be powered down
+ automatically.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_READ_STATUS">
+<title>FE_READ_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns status information about the front-end. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>,
+ fe_status_t &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct fe_status_t
+ *status</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end status word is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>status points to invalid address.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_READ_BER">
+<title>FE_READ_BER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the bit error rate for the signal currently
+ received/demodulated by the front-end. For this command, read-only access to
+ the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>,
+ uint32_t &#x22C6;ber);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ber</para>
+</entry><entry
+ align="char">
+<para>The bit error rate is stored into *ber.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_SNR">
+<title>FE_READ_SNR</title>
+
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal-to-noise ratio for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, int16_t
+ &#x22C6;snr);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *snr</para>
+</entry><entry
+ align="char">
+<para>The signal-to-noise ratio is stored into *snr.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_SIGNAL_STRENGTH">
+<title>FE_READ_SIGNAL_STRENGTH</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal strength value for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, int16_t &#x22C6;strength);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *strength</para>
+</entry><entry
+ align="char">
+<para>The signal strength value is stored into *strength.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_READ_UNCORRECTED_BLOCKS">
+<title>FE_READ_UNCORRECTED_BLOCKS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the number of uncorrected blocks detected by the device
+ driver during its lifetime. For meaningful measurements, the increment in block
+ count during a specific time interval should be calculated. For this command,
+ read-only access to the device is sufficient.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Note that the counter will wrap to zero after its maximum count has been
+ reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t &#x22C6;ublocks);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ublocks</para>
+</entry><entry
+ align="char">
+<para>The total number of uncorrected blocks seen by the driver
+ so far.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_FRONTEND">
+<title>FE_SET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call starts a tuning operation using specified parameters. The result
+ of this call will be successful if the parameters were valid and the tuning could
+ be initiated. The result of the tuning operation in itself, however, will arrive
+ asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and
+ FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before
+ the previous one was completed, the previous operation will be aborted in favor
+ of the new one. This command requires read/write access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_GET_FRONTEND">
+<title>FE_GET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call queries the currently effective frontend parameters. For this
+ command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+
+<section id="FE_GET_EVENT">
+<title>FE_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns a frontend event if available. If an event is not
+ available, the behavior depends on whether the device is in blocking or
+ non-blocking mode. In the latter case, the call fails immediately with errno
+ set to EWOULDBLOCK. In the former case, the call blocks until an event
+ becomes available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The standard Linux poll() and/or select() system calls can be used with the
+ device file descriptor to watch for new events. For select(), the file descriptor
+ should be included in the exceptfds argument, and for poll(), POLLPRI should
+ be specified as the wake-up condition. Since the event queue allocated is
+ rather small (room for 8 events), the queue must be serviced regularly to avoid
+ overflow. If an overflow happens, the oldest event is discarded from the queue,
+ and an error (EOVERFLOW) occurs the next time the queue is read. After
+ reporting the error condition in this fashion, subsequent
+ <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>
+ calls will return events from the queue as usual.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>For the sake of implementation simplicity, this command requires read/write
+ access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = QPSK_GET_EVENT,
+ struct dvb_frontend_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_event
+ *ev</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the event,</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>if any, is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+<para>Overflow in event queue - one or more events were lost.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_GET_INFO">
+<title>FE_GET_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns information about the front-end. This call only requires
+ read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(int fd, int request = <link linkend="FE_GET_INFO">FE_GET_INFO</link>, struct
+ dvb_frontend_info &#x22C6;info);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_INFO">FE_GET_INFO</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_info
+ *info</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end information is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_RESET_OVERLOAD">
+<title>FE_DISEQC_RESET_OVERLOAD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If the bus has been automatically powered off due to power overload, this ioctl
+ call restores the power to the bus. The call requires read/write access to the
+ device. This call has no effect if the device is manually powered off. Not all
+ DVB adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> for this
+ command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_SEND_MASTER_CMD">
+<title>FE_DISEQC_SEND_MASTER_CMD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a a DiSEqC command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>, struct
+ dvb_diseqc_master_cmd &#x22C6;cmd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_master_cmd
+ *cmd</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be transmitted.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_RECV_SLAVE_REPLY">
+<title>FE_DISEQC_RECV_SLAVE_REPLY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to receive reply to a DiSEqC 2.0 command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link>, struct
+ dvb_diseqc_slave_reply &#x22C6;reply);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_slave_reply
+ *reply</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be received.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_DISEQC_SEND_BURST">
+<title>FE_DISEQC_SEND_BURST</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a 22KHz tone burst.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>, fe_sec_mini_cmd_t burst);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_mini_cmd_t
+ burst</para>
+</entry><entry
+ align="char">
+<para>burst A or B.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_TONE">
+<title>FE_SET_TONE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the generation of the continuous 22kHz tone. This call
+ requires read/write permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_TONE">FE_SET_TONE</link>,
+ fe_sec_tone_mode_t tone);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_TONE">FE_SET_TONE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_tone_mode_t
+ tone</para>
+</entry><entry
+ align="char">
+<para>The requested tone generation mode (on/off).</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_VOLTAGE">
+<title>FE_SET_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the bus voltage. This call requires read/write
+ permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>,
+ fe_sec_voltage_t voltage);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_voltage_t
+ voltage</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_ENABLE_HIGH_LNB_VOLTAGE">
+<title>FE_ENABLE_HIGH_LNB_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If high != 0 enables slightly higher voltages instead of 13/18V (to compensate
+ for long cables). This call requires read/write permissions. Not all DVB
+ adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link>, int high);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int high</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_SET_FRONTEND_TUNE_MODE">
+<title>FE_SET_FRONTEND_TUNE_MODE</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>Allow setting tuner mode flags to the frontend.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+<link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>, unsigned int flags);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+	<para>unsigned int flags</para>
+</entry>
+<entry align="char">
+<para>
+FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device is closed, this flag will be automatically turned off when the device is reopened read-write.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+<section id="FE_DISHNETWORK_SEND_LEGACY_CMD">
+	<title>FE_DISHNETWORK_SEND_LEGACY_CMD</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para>
+<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para>
+<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+	<link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+	<para>unsigned long cmd</para>
+</entry>
+<entry align="char">
+<para>
+sends the specified raw cmd to the dish via DISEqC.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
+</section>
+
+</section>
+
+&sub-dvbproperty;

linux-imx/Documentation/DocBook/media/dvb/intro.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/intro.xml b/linux-imx/Documentation/DocBook/media/dvb/intro.xml
new file mode 100644
index 0000000..2048b53
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/intro.xml
@@ -0,0 +1,212 @@
+<title>Introduction</title>
+
+<section id="requisites">
+<title>What you need to know</title>
+
+<para>The reader of this document is required to have some knowledge in
+the area of digital video broadcasting (DVB) and should be familiar with
+part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e
+you should know what a program/transport stream (PS/TS) is and what is
+meant by a packetized elementary stream (PES) or an I-frame.</para>
+
+<para>Various DVB standards documents are available from
+<ulink url="http://www.dvb.org" /> and/or
+<ulink url="http://www.etsi.org" />.</para>
+
+<para>It is also necessary to know how to access unix/linux devices and
+how to use ioctl calls. This also includes the knowledge of C or C++.
+</para>
+</section>
+
+<section id="history">
+<title>History</title>
+
+<para>The first API for DVB cards we used at Convergence in late 1999
+was an extension of the Video4Linux API which was primarily developed
+for frame grabber cards. As such it was not really well suited to be
+used for DVB cards and their new features like recording MPEG streams
+and filtering several section and PES data streams at the same time.
+</para>
+
+<para>In early 2000, we were approached by Nokia with a proposal for a
+new standard Linux DVB API. As a commitment to the development of
+terminals based on open standards, Nokia and Convergence made it
+available to all Linux developers and published it on
+<ulink url="http://www.linuxtv.org/" /> in September 2000.
+Convergence is the maintainer of the Linux DVB API. Together with the
+LinuxTV community (i.e. you, the reader of this document), the Linux DVB
+API will be constantly reviewed and improved. With the Linux driver for
+the Siemens/Hauppauge DVB PCI card Convergence provides a first
+implementation of the Linux DVB API.</para>
+</section>
+
+<section id="overview">
+<title>Overview</title>
+
+<figure id="stb_components">
+<title>Components of a DVB card/STB</title>
+<mediaobject>
+<imageobject>
+<imagedata fileref="dvbstb.pdf" format="PS" />
+</imageobject>
+<imageobject>
+<imagedata fileref="dvbstb.png" format="PNG" />
+</imageobject>
+</mediaobject>
+</figure>
+
+<para>A DVB PCI card or DVB set-top-box (STB) usually consists of the
+following main hardware components: </para>
+
+<itemizedlist>
+ <listitem>
+
+<para>Frontend consisting of tuner and DVB demodulator</para>
+
+<para>Here the raw signal reaches the DVB hardware from a satellite dish
+or antenna or directly from cable. The frontend down-converts and
+demodulates this signal into an MPEG transport stream (TS). In case of a
+satellite frontend, this includes a facility for satellite equipment
+control (SEC), which allows control of LNB polarization, multi feed
+switches or dish rotors.</para>
+
+</listitem>
+ <listitem>
+
+<para>Conditional Access (CA) hardware like CI adapters and smartcard slots
+</para>
+
+<para>The complete TS is passed through the CA hardware. Programs to
+which the user has access (controlled by the smart card) are decoded in
+real time and re-inserted into the TS.</para>
+
+</listitem>
+ <listitem>
+ <para>Demultiplexer which filters the incoming DVB stream</para>
+
+<para>The demultiplexer splits the TS into its components like audio and
+video streams. Besides usually several of such audio and video streams
+it also contains data streams with information about the programs
+offered in this or other streams of the same provider.</para>
+
+</listitem>
+<listitem>
+
+<para>MPEG2 audio and video decoder</para>
+
+<para>The main targets of the demultiplexer are the MPEG2 audio and
+video decoders. After decoding they pass on the uncompressed audio and
+video to the computer screen or (through a PAL/NTSC encoder) to a TV
+set.</para>
+
+
+</listitem>
+</itemizedlist>
+
+<para><xref linkend="stb_components" /> shows a crude schematic of the control and data flow
+between those components.</para>
+
+<para>On a DVB PCI card not all of these have to be present since some
+functionality can be provided by the main CPU of the PC (e.g. MPEG
+picture and sound decoding) or is not needed (e.g. for data-only uses
+like &#8220;internet over satellite&#8221;). Also not every card or STB
+provides conditional access hardware.</para>
+
+</section>
+
+<section id="dvb_devices">
+<title>Linux DVB Devices</title>
+
+<para>The Linux DVB API lets you control these hardware components
+through currently six Unix-style character devices for video, audio,
+frontend, demux, CA and IP-over-DVB networking. The video and audio
+devices control the MPEG2 decoder hardware, the frontend device the
+tuner and the DVB demodulator. The demux device gives you control over
+the PES and section filters of the hardware. If the hardware does not
+support filtering these filters can be implemented in software. Finally,
+the CA device controls all the conditional access capabilities of the
+hardware. It can depend on the individual security requirements of the
+platform, if and how many of the CA functions are made available to the
+application through this device.</para>
+
+<para>All devices can be found in the <emphasis role="tt">/dev</emphasis>
+tree under <emphasis role="tt">/dev/dvb</emphasis>. The individual devices
+are called:</para>
+
+<itemizedlist>
+<listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/audioM</emphasis>,</para>
+</listitem>
+<listitem>
+<para><emphasis role="tt">/dev/dvb/adapterN/videoM</emphasis>,</para>
+</listitem>
+<listitem>
+<para><emphasis role="tt">/dev/dvb/adapterN/frontendM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/netM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/demuxM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/dvrM</emphasis>,</para>
+</listitem>
+ <listitem>
+
+<para><emphasis role="tt">/dev/dvb/adapterN/caM</emphasis>,</para></listitem></itemizedlist>
+
+<para>where N enumerates the DVB PCI cards in a system starting
+from&#x00A0;0, and M enumerates the devices of each type within each
+adapter, starting from&#x00A0;0, too. We will omit the &#8220;<emphasis
+role="tt">/dev/dvb/adapterN/</emphasis>&#8221; in the further dicussion
+of these devices. The naming scheme for the devices is the same wheter
+devfs is used or not.</para>
+
+<para>More details about the data structures and function calls of all
+the devices are described in the following chapters.</para>
+
+</section>
+
+<section id="include_files">
+<title>API include files</title>
+
+<para>For each of the DVB devices a corresponding include file exists.
+The DVB API include files should be included in application sources with
+a partial path like:</para>
+
+<programlisting>
+	#include &#x003C;linux/dvb/audio.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/ca.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/dmx.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/frontend.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/net.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/osd.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/video.h&#x003E;
+</programlisting>
+
+<para>To enable applications to support different API version, an
+additional include file <emphasis
+role="tt">linux/dvb/version.h</emphasis> exists, which defines the
+constant <emphasis role="tt">DVB_API_VERSION</emphasis>. This document
+describes <emphasis role="tt">DVB_API_VERSION 5.8</emphasis>.
+</para>
+
+</section>
+

linux-imx/Documentation/DocBook/media/dvb/kdapi.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/kdapi.xml b/linux-imx/Documentation/DocBook/media/dvb/kdapi.xml
new file mode 100644
index 0000000..6c11ec5
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/kdapi.xml
@@ -0,0 +1,2309 @@
+<title>Kernel Demux API</title>
+<para>The kernel demux API defines a driver-internal interface for registering low-level,
+hardware specific driver to a hardware independent demux layer. It is only of interest for
+DVB device driver writers. The header file for this API is named <emphasis role="tt">demux.h</emphasis> and located in
+<emphasis role="tt">drivers/media/dvb-core</emphasis>.
+</para>
+<para>Maintainer note: This section must be reviewed. It is probably out of date.
+</para>
+
+<section id="kernel_demux_data_types">
+<title>Kernel Demux Data Types</title>
+
+
+<section id="dmx_success_t">
+<title>dmx_success_t</title>
+ <programlisting>
+ typedef enum {
+   DMX_OK = 0, /&#x22C6; Received Ok &#x22C6;/
+   DMX_LENGTH_ERROR, /&#x22C6; Incorrect length &#x22C6;/
+   DMX_OVERRUN_ERROR, /&#x22C6; Receiver ring buffer overrun &#x22C6;/
+   DMX_CRC_ERROR, /&#x22C6; Incorrect CRC &#x22C6;/
+   DMX_FRAME_ERROR, /&#x22C6; Frame alignment error &#x22C6;/
+   DMX_FIFO_ERROR, /&#x22C6; Receiver FIFO overrun &#x22C6;/
+   DMX_MISSED_ERROR /&#x22C6; Receiver missed packet &#x22C6;/
+ } dmx_success_t;
+</programlisting>
+
+</section>
+<section id="ts_filter_types">
+<title>TS filter types</title>
+ <programlisting>
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; TS packet reception &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ /&#x22C6; TS filter type for set_type() &#x22C6;/
+
+ #define TS_PACKET       1   /&#x22C6; send TS packets (188 bytes) to callback (default) &#x22C6;/
+ #define TS_PAYLOAD_ONLY 2   /&#x22C6; in case TS_PACKET is set, only send the TS
+				payload (&#x003C;=184 bytes per packet) to callback &#x22C6;/
+ #define TS_DECODER      4   /&#x22C6; send stream to built-in decoder (if present) &#x22C6;/
+</programlisting>
+
+</section>
+<section id="dmx_ts_pes_t">
+<title>dmx_ts_pes_t</title>
+<para>The structure
+</para>
+<programlisting>
+ typedef enum
+ {
+	 DMX_TS_PES_AUDIO,   /&#x22C6; also send packets to audio decoder (if it exists) &#x22C6;/
+	 DMX_TS_PES_VIDEO,   /&#x22C6; ... &#x22C6;/
+	 DMX_TS_PES_TELETEXT,
+	 DMX_TS_PES_SUBTITLE,
+	 DMX_TS_PES_PCR,
+	 DMX_TS_PES_OTHER,
+ } dmx_ts_pes_t;
+</programlisting>
+<para>describes the PES type for filters which write to a built-in decoder. The correspond (and
+should be kept identical) to the types in the demux device.
+</para>
+<programlisting>
+ struct dmx_ts_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_ts_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t callback_length,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     struct timespec timeout);
+	 int (&#x22C6;start_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
+	 int (&#x22C6;set_type) (struct dmx_ts_feed_s&#x22C6; feed,
+			  int type,
+			  dmx_ts_pes_t pes_type);
+ };
+
+ typedef struct dmx_ts_feed_s dmx_ts_feed_t;
+</programlisting>
+ <programlisting>
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; PES packet reception (not supported yet) &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef struct dmx_pes_filter_s {
+	 struct dmx_pes_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+ } dmx_pes_filter_t;
+</programlisting>
+ <programlisting>
+ typedef struct dmx_pes_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_pes_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     struct timespec timeout);
+	 int (&#x22C6;start_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
+	 int (&#x22C6;allocate_filter) (struct dmx_pes_feed_s&#x22C6; feed,
+				 dmx_pes_filter_t&#x22C6;&#x22C6; filter);
+	 int (&#x22C6;release_filter) (struct dmx_pes_feed_s&#x22C6; feed,
+				dmx_pes_filter_t&#x22C6; filter);
+ } dmx_pes_feed_t;
+</programlisting>
+ <programlisting>
+ typedef struct {
+	 __u8 filter_value [DMX_MAX_FILTER_SIZE];
+	 __u8 filter_mask [DMX_MAX_FILTER_SIZE];
+	 struct dmx_section_feed_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+ } dmx_section_filter_t;
+</programlisting>
+ <programlisting>
+ struct dmx_section_feed_s {
+	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
+	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
+	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int (&#x22C6;set) (struct dmx_section_feed_s&#x22C6; feed,
+		     __u16 pid,
+		     size_t circular_buffer_size,
+		     int descramble,
+		     int check_crc);
+	 int (&#x22C6;allocate_filter) (struct dmx_section_feed_s&#x22C6; feed,
+				 dmx_section_filter_t&#x22C6;&#x22C6; filter);
+	 int (&#x22C6;release_filter) (struct dmx_section_feed_s&#x22C6; feed,
+				dmx_section_filter_t&#x22C6; filter);
+	 int (&#x22C6;start_filtering) (struct dmx_section_feed_s&#x22C6; feed);
+	 int (&#x22C6;stop_filtering) (struct dmx_section_feed_s&#x22C6; feed);
+ };
+ typedef struct dmx_section_feed_s dmx_section_feed_t;
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; Callback functions &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef int (&#x22C6;dmx_ts_cb) ( __u8 &#x22C6; buffer1,
+			    size_t buffer1_length,
+			    __u8 &#x22C6; buffer2,
+			    size_t buffer2_length,
+			    dmx_ts_feed_t&#x22C6; source,
+			    dmx_success_t success);
+
+ typedef int (&#x22C6;dmx_section_cb) ( __u8 &#x22C6; buffer1,
+				 size_t buffer1_len,
+				 __u8 &#x22C6; buffer2,
+				 size_t buffer2_len,
+				 dmx_section_filter_t &#x22C6; source,
+				 dmx_success_t success);
+
+ typedef int (&#x22C6;dmx_pes_cb) ( __u8 &#x22C6; buffer1,
+			     size_t buffer1_len,
+			     __u8 &#x22C6; buffer2,
+			     size_t buffer2_len,
+			     dmx_pes_filter_t&#x22C6; source,
+			     dmx_success_t success);
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; DVB Front-End &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ typedef enum {
+	 DMX_OTHER_FE = 0,
+	 DMX_SATELLITE_FE,
+	 DMX_CABLE_FE,
+	 DMX_TERRESTRIAL_FE,
+	 DMX_LVDS_FE,
+	 DMX_ASI_FE, /&#x22C6; DVB-ASI interface &#x22C6;/
+	 DMX_MEMORY_FE
+ } dmx_frontend_source_t;
+
+ typedef struct {
+	 /&#x22C6; The following char&#x22C6; fields point to NULL terminated strings &#x22C6;/
+	 char&#x22C6; id;                    /&#x22C6; Unique front-end identifier &#x22C6;/
+	 char&#x22C6; vendor;                /&#x22C6; Name of the front-end vendor &#x22C6;/
+	 char&#x22C6; model;                 /&#x22C6; Name of the front-end model &#x22C6;/
+	 struct list_head connectivity_list; /&#x22C6; List of front-ends that can
+						be connected to a particular
+						demux &#x22C6;/
+	 void&#x22C6; priv;     /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 dmx_frontend_source_t source;
+ } dmx_frontend_t;
+
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+ /&#x22C6; MPEG-2 TS Demux &#x22C6;/
+ /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
+
+ /&#x22C6;
+  &#x22C6; Flags OR'ed in the capabilites field of struct dmx_demux_s.
+  &#x22C6;/
+
+ #define DMX_TS_FILTERING                        1
+ #define DMX_PES_FILTERING                       2
+ #define DMX_SECTION_FILTERING                   4
+ #define DMX_MEMORY_BASED_FILTERING              8    /&#x22C6; write() available &#x22C6;/
+ #define DMX_CRC_CHECKING                        16
+ #define DMX_TS_DESCRAMBLING                     32
+ #define DMX_SECTION_PAYLOAD_DESCRAMBLING        64
+ #define DMX_MAC_ADDRESS_DESCRAMBLING            128
+</programlisting>
+
+</section>
+<section id="demux_demux_t">
+<title>demux_demux_t</title>
+ <programlisting>
+ /&#x22C6;
+  &#x22C6; DMX_FE_ENTRY(): Casts elements in the list of registered
+  &#x22C6; front-ends from the generic type struct list_head
+  &#x22C6; to the type &#x22C6; dmx_frontend_t
+  &#x22C6;.
+ &#x22C6;/
+
+ #define DMX_FE_ENTRY(list) list_entry(list, dmx_frontend_t, connectivity_list)
+
+ struct dmx_demux_s {
+	 /&#x22C6; The following char&#x22C6; fields point to NULL terminated strings &#x22C6;/
+	 char&#x22C6; id;                    /&#x22C6; Unique demux identifier &#x22C6;/
+	 char&#x22C6; vendor;                /&#x22C6; Name of the demux vendor &#x22C6;/
+	 char&#x22C6; model;                 /&#x22C6; Name of the demux model &#x22C6;/
+	 __u32 capabilities;          /&#x22C6; Bitfield of capability flags &#x22C6;/
+	 dmx_frontend_t&#x22C6; frontend;    /&#x22C6; Front-end connected to the demux &#x22C6;/
+	 struct list_head reg_list;   /&#x22C6; List of registered demuxes &#x22C6;/
+	 void&#x22C6; priv;                  /&#x22C6; Pointer to private data of the API client &#x22C6;/
+	 int users;                   /&#x22C6; Number of users &#x22C6;/
+	 int (&#x22C6;open) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;close) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;write) (struct dmx_demux_s&#x22C6; demux, const char&#x22C6; buf, size_t count);
+	 int (&#x22C6;allocate_ts_feed) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_ts_feed_t&#x22C6;&#x22C6; feed,
+				  dmx_ts_cb callback);
+	 int (&#x22C6;release_ts_feed) (struct dmx_demux_s&#x22C6; demux,
+				 dmx_ts_feed_t&#x22C6; feed);
+	 int (&#x22C6;allocate_pes_feed) (struct dmx_demux_s&#x22C6; demux,
+				   dmx_pes_feed_t&#x22C6;&#x22C6; feed,
+				   dmx_pes_cb callback);
+	 int (&#x22C6;release_pes_feed) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_pes_feed_t&#x22C6; feed);
+	 int (&#x22C6;allocate_section_feed) (struct dmx_demux_s&#x22C6; demux,
+				       dmx_section_feed_t&#x22C6;&#x22C6; feed,
+				       dmx_section_cb callback);
+	 int (&#x22C6;release_section_feed) (struct dmx_demux_s&#x22C6; demux,
+				      dmx_section_feed_t&#x22C6; feed);
+	 int (&#x22C6;descramble_mac_address) (struct dmx_demux_s&#x22C6; demux,
+					__u8&#x22C6; buffer1,
+					size_t buffer1_length,
+					__u8&#x22C6; buffer2,
+					size_t buffer2_length,
+					__u16 pid);
+	 int (&#x22C6;descramble_section_payload) (struct dmx_demux_s&#x22C6; demux,
+					    __u8&#x22C6; buffer1,
+					    size_t buffer1_length,
+					    __u8&#x22C6; buffer2, size_t buffer2_length,
+					    __u16 pid);
+	 int (&#x22C6;add_frontend) (struct dmx_demux_s&#x22C6; demux,
+			      dmx_frontend_t&#x22C6; frontend);
+	 int (&#x22C6;remove_frontend) (struct dmx_demux_s&#x22C6; demux,
+				 dmx_frontend_t&#x22C6; frontend);
+	 struct list_head&#x22C6; (&#x22C6;get_frontends) (struct dmx_demux_s&#x22C6; demux);
+	 int (&#x22C6;connect_frontend) (struct dmx_demux_s&#x22C6; demux,
+				  dmx_frontend_t&#x22C6; frontend);
+	 int (&#x22C6;disconnect_frontend) (struct dmx_demux_s&#x22C6; demux);
+
+
+	 /&#x22C6; added because js cannot keep track of these himself &#x22C6;/
+	 int (&#x22C6;get_pes_pids) (struct dmx_demux_s&#x22C6; demux, __u16 &#x22C6;pids);
+ };
+ typedef struct dmx_demux_s dmx_demux_t;
+</programlisting>
+
+</section>
+<section id="demux_directory">
+<title>Demux directory</title>
+ <programlisting>
+ /&#x22C6;
+  &#x22C6; DMX_DIR_ENTRY(): Casts elements in the list of registered
+  &#x22C6; demuxes from the generic type struct list_head&#x22C6; to the type dmx_demux_t
+  &#x22C6;.
+  &#x22C6;/
+
+ #define DMX_DIR_ENTRY(list) list_entry(list, dmx_demux_t, reg_list)
+
+ int dmx_register_demux (dmx_demux_t&#x22C6; demux);
+ int dmx_unregister_demux (dmx_demux_t&#x22C6; demux);
+ struct list_head&#x22C6; dmx_get_demuxes (void);
+</programlisting>
+ </section></section>
+<section id="demux_directory_api">
+<title>Demux Directory API</title>
+<para>The demux directory is a Linux kernel-wide facility for registering and accessing the
+MPEG-2 TS demuxes in the system. Run-time registering and unregistering of demux drivers
+is possible using this API.
+</para>
+<para>All demux drivers in the directory implement the abstract interface dmx_demux_t.
+</para>
+
+<section
+role="subsection"><title>dmx_register_demux()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function makes a demux driver interface available to the Linux kernel. It is
+ usually called by the init_module() function of the kernel module that contains
+ the demux driver. The caller of this function is responsible for allocating
+ dynamic or static memory for the demux structure and for initializing its fields
+ before calling this function. The memory allocated for the demux structure
+ must not be freed before calling dmx_unregister_demux(),</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_register_demux ( dmx_demux_t &#x22C6;demux )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux structure.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EEXIST</para>
+</entry><entry
+ align="char">
+<para>A demux with the same value of the id field already stored
+ in the directory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSPC</para>
+</entry><entry
+ align="char">
+<para>No space left in the directory.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_unregister_demux()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function is called to indicate that the given demux interface is no
+ longer available. The caller of this function is responsible for freeing the
+ memory of the demux structure, if it was dynamically allocated before calling
+ dmx_register_demux(). The cleanup_module() function of the kernel module
+ that contains the demux driver should call this function. Note that this function
+ fails if the demux is currently in use, i.e., release_demux() has not been called
+ for the interface.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_unregister_demux ( dmx_demux_t &#x22C6;demux )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux structure which is to be
+ unregistered.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>The specified demux is not registered in the demux
+ directory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>The specified demux is currently in use.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_get_demuxes()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Provides the caller with the list of registered demux interfaces, using the
+ standard list structure defined in the include file linux/list.h. The include file
+ demux.h defines the macro DMX_DIR_ENTRY() for converting an element of
+ the generic type struct list_head* to the type dmx_demux_t*. The caller must
+ not free the memory of any of the elements obtained via this function call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>struct list_head &#x22C6;dmx_get_demuxes ()</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>none</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>struct list_head *</para>
+</entry><entry
+ align="char">
+<para>A list of demux interfaces, or NULL in the case of an
+ empty list.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="demux_api">
+<title>Demux API</title>
+<para>The demux API should be implemented for each demux in the system. It is used to select
+the TS source of a demux and to manage the demux resources. When the demux
+client allocates a resource via the demux API, it receives a pointer to the API of that
+resource.
+</para>
+<para>Each demux receives its TS input from a DVB front-end or from memory, as set via the
+demux API. In a system with more than one front-end, the API can be used to select one of
+the DVB front-ends as a TS source for a demux, unless this is fixed in the HW platform. The
+demux API only controls front-ends regarding their connections with demuxes; the APIs
+used to set the other front-end parameters, such as tuning, are not defined in this
+document.
+</para>
+<para>The functions that implement the abstract interface demux should be defined static or
+module private and registered to the Demux Directory for external access. It is not necessary
+to implement every function in the demux_t struct, however (for example, a demux interface
+might support Section filtering, but not TS or PES filtering). The API client is expected to
+check the value of any function pointer before calling the function: the value of NULL means
+&#8220;function not available&#8221;.
+</para>
+<para>Whenever the functions of the demux API modify shared data, the possibilities of lost
+update and race condition problems should be addressed, e.g. by protecting parts of code with
+mutexes. This is especially important on multi-processor hosts.
+</para>
+<para>Note that functions called from a bottom half context must not sleep, at least in the 2.2.x
+kernels. Even a simple memory allocation can result in a kernel thread being put to sleep if
+swapping is needed. For example, the Linux kernel calls the functions of a network device
+interface from a bottom half context. Thus, if a demux API function is called from network
+device code, the function must not sleep.
+</para>
+
+
+<section id="kdapi_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function reserves the demux for use by the caller and, if necessary,
+ initializes the demux. When the demux is no longer needed, the function close()
+ should be called. It should be possible for multiple clients to access the demux
+ at the same time. Thus, the function implementation should increment the
+ demux usage count when open() is called and decrement it when close() is
+ called.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open ( demux_t&#x22C6; demux );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EUSERS</para>
+</entry><entry
+ align="char">
+<para>Maximum usage count reached.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="kdapi_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function reserves the demux for use by the caller and, if necessary,
+ initializes the demux. When the demux is no longer needed, the function close()
+ should be called. It should be possible for multiple clients to access the demux
+ at the same time. Thus, the function implementation should increment the
+ demux usage count when open() is called and decrement it when close() is
+ called.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENODEV</para>
+</entry><entry
+ align="char">
+<para>The demux was not in use.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="kdapi_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function provides the demux driver with a memory buffer containing TS
+ packets. Instead of receiving TS packets from the DVB front-end, the demux
+ driver software will read packets from memory. Any clients of this demux
+ with active TS, PES or Section filters will receive filtered data via the Demux
+ callback API (see 0). The function returns when all the data in the buffer has
+ been consumed by the demux. Demux hardware typically cannot read TS from
+ memory. If this is the case, memory-based filtering has to be implemented
+ entirely in software.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int write(demux_t&#x22C6; demux, const char&#x22C6; buf, size_t
+ count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>const char* buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS data in kernel-space memory.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_ts_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Allocates a new TS feed, which is used to filter the TS packets carrying a
+ certain PID. The TS feed normally corresponds to a hardware PID filter on the
+ demux chip.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_ts_feed(dmx_demux_t&#x22C6; demux,
+ dmx_ts_feed_t&#x22C6;&#x22C6; feed, dmx_ts_cb callback);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t**
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_cb callback</para>
+</entry><entry
+ align="char">
+<para>Pointer to the callback function for passing received TS
+ packet</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>No more TS feeds available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_ts_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Releases the resources allocated with allocate_ts_feed(). Any filtering in
+ progress on the TS feed should be stopped before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_ts_feed(dmx_demux_t&#x22C6; demux,
+ dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t* demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_section_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Allocates a new section feed, i.e. a demux resource for filtering and receiving
+ sections. On platforms with hardware support for section filtering, a section
+ feed is directly mapped to the demux HW. On other platforms, TS packets are
+ first PID filtered in hardware and a hardware section filter then emulated in
+ software. The caller obtains an API pointer of type dmx_section_feed_t as an
+ out parameter. Using this API the caller can set filtering parameters and start
+ receiving sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_section_feed(dmx_demux_t&#x22C6; demux,
+ dmx_section_feed_t &#x22C6;&#x22C6;feed, dmx_section_cb callback);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_feed_t
+ **feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_cb
+ callback</para>
+</entry><entry
+ align="char">
+<para>Pointer to the callback function for passing received
+ sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>No more section feeds available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>The command is not implemented.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_section_feed()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Releases the resources allocated with allocate_section_feed(), including
+ allocated filters. Any filtering in progress on the section feed should be stopped
+ before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_section_feed(dmx_demux_t&#x22C6; demux,
+ dmx_section_feed_t &#x22C6;feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>demux_t *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_feed_t
+ *feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>descramble_mac_address()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function runs a descrambling algorithm on the destination MAC
+ address field of a DVB Datagram Section, replacing the original address
+ with its un-encrypted version. Otherwise, the description on the function
+ descramble_section_payload() applies also to this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int descramble_mac_address(dmx_demux_t&#x22C6; demux, __u8
+ &#x22C6;buffer1, size_t buffer1_length, __u8 &#x22C6;buffer2,
+ size_t buffer2_length, __u16 pid);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t
+ *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the first byte of the section.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the section data, or NULL. The
+ pointer has a non-NULL value if the section wraps past
+ the end of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>The PID on which the section was received. Useful
+ for obtaining the descrambling key, e.g. from a DVB
+ Common Access facility.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>descramble_section_payload()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function runs a descrambling algorithm on the payload of a DVB
+ Datagram Section, replacing the original payload with its un-encrypted
+ version. The function will be called from the demux API implementation;
+ the API client need not call this function directly. Section-level scrambling
+ algorithms are currently standardized only for DVB-RCC (return channel
+ over 2-directional cable TV network) systems. For all other DVB networks,
+ encryption schemes are likely to be proprietary to each data broadcaster. Thus,
+ it is expected that this function pointer will have the value of NULL (i.e.,
+ function not available) in most demux API implementations. Nevertheless, it
+ should be possible to use the function pointer as a hook for dynamically adding
+ a &#8220;plug-in&#8221; descrambling facility to a demux driver.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>While this function is not needed with hardware-based section descrambling,
+ the descramble_section_payload function pointer can be used to override the
+ default hardware-based descrambling algorithm: if the function pointer has a
+ non-NULL value, the corresponding function should be used instead of any
+ descrambling hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int descramble_section_payload(dmx_demux_t&#x22C6; demux,
+ __u8 &#x22C6;buffer1, size_t buffer1_length, __u8 &#x22C6;buffer2,
+ size_t buffer2_length, __u16 pid);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t
+ *demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the first byte of the section.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8 *buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the section data, or NULL. The
+ pointer has a non-NULL value if the section wraps past
+ the end of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the section data, including headers and CRC,
+ in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>The PID on which the section was received. Useful
+ for obtaining the descrambling key, e.g. from a DVB
+ Common Access facility.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>add_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Registers a connectivity between a demux and a front-end, i.e., indicates that
+ the demux can be connected via a call to connect_frontend() to use the given
+ front-end as a TS source. The client of this function has to allocate dynamic or
+ static memory for the frontend structure and initialize its fields before calling
+ this function. This function is normally called during the driver initialization.
+ The caller must not free the memory of the frontend struct before successfully
+ calling remove_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int add_frontend(dmx_demux_t &#x22C6;demux, dmx_frontend_t
+ &#x22C6;frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EEXIST</para>
+</entry><entry
+ align="char">
+<para>A front-end with the same value of the id field already
+ registered.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINUSE</para>
+</entry><entry
+ align="char">
+<para>The demux is in use.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>No more front-ends can be added.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>remove_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Indicates that the given front-end, registered by a call to add_frontend(), can
+ no longer be connected as a TS source by this demux. The function should be
+ called when a front-end driver or a demux driver is removed from the system.
+ If the front-end is in use, the function fails with the return value of -EBUSY.
+ After successfully calling this function, the caller can free the memory of
+ the frontend struct if it was dynamically allocated before the add_frontend()
+ operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int remove_frontend(dmx_demux_t&#x22C6; demux,
+ dmx_frontend_t&#x22C6; frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>The front-end is in use, i.e. a call to connect_frontend()
+ has not been followed by a call to disconnect_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>get_frontends()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Provides the APIs of the front-ends that have been registered for this demux.
+ Any of the front-ends obtained with this call can be used as a parameter for
+ connect_frontend().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The include file demux.h contains the macro DMX_FE_ENTRY() for
+ converting an element of the generic type struct list_head* to the type
+ dmx_frontend_t*. The caller must not free the memory of any of the elements
+ obtained via this function call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>struct list_head&#x22C6; get_frontends(dmx_demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*</para>
+</entry><entry
+ align="char">
+<para>A list of front-end interfaces, or NULL in the case of an
+ empty list.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>connect_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Connects the TS output of the front-end to the input of the demux. A demux
+ can only be connected to a front-end registered to the demux with the function
+ add_frontend().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>It may or may not be possible to connect multiple demuxes to the same
+ front-end, depending on the capabilities of the HW platform. When not used,
+ the front-end should be released by calling disconnect_frontend().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int connect_frontend(dmx_demux_t&#x22C6; demux,
+ dmx_frontend_t&#x22C6; frontend);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_frontend_t*
+ frontend</para>
+</entry><entry
+ align="char">
+<para>Pointer to the front-end instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EBUSY</para>
+</entry><entry
+ align="char">
+<para>The front-end is in use.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>disconnect_frontend()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Disconnects the demux and a front-end previously connected by a
+ connect_frontend() call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int disconnect_frontend(dmx_demux_t&#x22C6; demux);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_demux_t*
+ demux</para>
+</entry><entry
+ align="char">
+<para>Pointer to the demux API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="demux_callback_api">
+<title>Demux Callback API</title>
+<para>This kernel-space API comprises the callback functions that deliver filtered data to the
+demux client. Unlike the other APIs, these API functions are provided by the client and called
+from the demux code.
+</para>
+<para>The function pointers of this abstract interface are not packed into a structure as in the
+other demux APIs, because the callback functions are registered and used independent
+of each other. As an example, it is possible for the API client to provide several
+callback functions for receiving TS packets and no callbacks for PES packets or
+sections.
+</para>
+<para>The functions that implement the callback API need not be re-entrant: when a demux
+driver calls one of these functions, the driver is not allowed to call the function again before
+the original call returns. If a callback is triggered by a hardware interrupt, it is recommended
+to use the Linux &#8220;bottom half&#8221; mechanism or start a tasklet instead of making the callback
+function call directly from a hardware interrupt.
+</para>
+
+<section
+role="subsection"><title>dmx_ts_cb()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function, provided by the client of the demux API, is called from the
+ demux code. The function is only called when filtering on this TS feed has
+ been enabled using the start_filtering() function.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Any TS packets that match the filter settings are copied to a circular buffer. The
+ filtered TS packets are delivered to the client using this callback function. The
+ size of the circular buffer is controlled by the circular_buffer_size parameter
+ of the set() function in the TS Feed API. It is expected that the buffer1 and
+ buffer2 callback parameters point to addresses within the circular buffer, but
+ other implementations are also possible. Note that the called party should not
+ try to free the memory the buffer1 and buffer2 parameters point to.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>When this function is called, the buffer1 parameter typically points to the
+ start of the first undelivered TS packet within a circular buffer. The buffer2
+ buffer parameter is normally NULL, except when the received TS packets have
+ crossed the last address of the circular buffer and &#8221;wrapped&#8221; to the beginning
+ of the buffer. In the latter case the buffer1 parameter would contain an address
+ within the circular buffer, while the buffer2 parameter would contain the first
+ address of the circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The number of bytes delivered with this function (i.e. buffer1_length +
+ buffer2_length) is usually equal to the value of callback_length parameter
+ given in the set() function, with one exception: if a timeout occurs before
+ receiving callback_length bytes of TS data, any undelivered packets are
+ immediately delivered to the client by calling this function. The timeout
+ duration is controlled by the set() function in the TS Feed API.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>If a TS packet is received with errors that could not be fixed by the TS-level
+ forward error correction (FEC), the Transport_error_indicator flag of the TS
+ packet header should be set. The TS packet should not be discarded, as
+ the error can possibly be corrected by a higher layer protocol. If the called
+ party is slow in processing the callback, it is possible that the circular buffer
+ eventually fills up. If this happens, the demux driver should discard any TS
+ packets received while the buffer is full. The error should be indicated to the
+ client on the next callback by setting the success parameter to the value of
+ DMX_OVERRUN_ERROR.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The type of data returned to the callback can be selected by the new
+ function int (*set_type) (struct dmx_ts_feed_s* feed, int type, dmx_ts_pes_t
+ pes_type) which is part of the dmx_ts_feed_s struct (also cf. to the
+ include file ost/demux.h) The type parameter decides if the raw TS packet
+ (TS_PACKET) or just the payload (TS_PACKET&#8212;TS_PAYLOAD_ONLY)
+ should be returned. If additionally the TS_DECODER bit is set the stream
+ will also be sent to the hardware MPEG decoder. In this case, the second
+ flag decides as what kind of data the stream should be interpreted. The
+ possible choices are one of DMX_TS_PES_AUDIO, DMX_TS_PES_VIDEO,
+ DMX_TS_PES_TELETEXT, DMX_TS_PES_SUBTITLE,
+ DMX_TS_PES_PCR, or DMX_TS_PES_OTHER.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_ts_cb(__u8&#x22C6; buffer1, size_t buffer1_length,
+ __u8&#x22C6; buffer2, size_t buffer2_length, dmx_ts_feed_t&#x22C6;
+ source, dmx_success_t success);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>__u8* buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the start of the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data in buffer1.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the filtered TS packets, or NULL.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the TS data in buffer2.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_ts_feed_t*
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates which TS feed is the source of the callback.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_success_t
+ success</para>
+</entry><entry
+ align="char">
+<para>Indicates if there was an error in TS reception.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>Continue filtering.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-1</para>
+</entry><entry
+ align="char">
+<para>Stop filtering - has the same effect as a call to
+ stop_filtering() on the TS Feed API.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>dmx_section_cb()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function, provided by the client of the demux API, is called from the
+ demux code. The function is only called when filtering of sections has been
+ enabled using the function start_filtering() of the section feed API. When the
+ demux driver has received a complete section that matches at least one section
+ filter, the client is notified via this callback function. Normally this function is
+ called for each received section; however, it is also possible to deliver multiple
+ sections with one callback, for example when the system load is high. If an
+ error occurs while receiving a section, this function should be called with
+ the corresponding error type set in the success field, whether or not there is
+ data to deliver. The Section Feed implementation should maintain a circular
+ buffer for received sections. However, this is not necessary if the Section Feed
+ API is implemented as a client of the TS Feed API, because the TS Feed
+ implementation then buffers the received data. The size of the circular buffer
+ can be configured using the set() function in the Section Feed API. If there
+ is no room in the circular buffer when a new section is received, the section
+ must be discarded. If this happens, the value of the success parameter should
+ be DMX_OVERRUN_ERROR on the next callback.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int dmx_section_cb(__u8&#x22C6; buffer1, size_t
+ buffer1_length, __u8&#x22C6; buffer2, size_t
+ buffer2_length, dmx_section_filter_t&#x22C6; source,
+ dmx_success_t success);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>__u8* buffer1</para>
+</entry><entry
+ align="char">
+<para>Pointer to the start of the filtered section, e.g. within the
+ circular buffer of the demux driver.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer1_length</para>
+</entry><entry
+ align="char">
+<para>Length of the filtered section data in buffer1, including
+ headers and CRC.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u8* buffer2</para>
+</entry><entry
+ align="char">
+<para>Pointer to the tail of the filtered section data, or NULL.
+ Useful to handle the wrapping of a circular buffer.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t buffer2_length</para>
+</entry><entry
+ align="char">
+<para>Length of the filtered section data in buffer2, including
+ headers and CRC.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t*
+ filter</para>
+</entry><entry
+ align="char">
+<para>Indicates the filter that triggered the callback.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_success_t
+ success</para>
+</entry><entry
+ align="char">
+<para>Indicates if there was an error in section reception.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>Continue filtering.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-1</para>
+</entry><entry
+ align="char">
+<para>Stop filtering - has the same effect as a call to
+ stop_filtering() on the Section Feed API.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="ts_feed_api">
+<title>TS Feed API</title>
+<para>A TS feed is typically mapped to a hardware PID filter on the demux chip.
+Using this API, the client can set the filtering properties to start/stop filtering TS
+packets on a particular TS feed. The API is defined as an abstract interface of the type
+dmx_ts_feed_t.
+</para>
+<para>The functions that implement the interface should be defined static or module private. The
+client can get the handle of a TS feed API by calling the function allocate_ts_feed() in the
+demux API.
+</para>
+
+<section
+role="subsection"><title>set()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function sets the parameters of a TS feed. Any filtering in progress on the
+ TS feed must be stopped before calling this function.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int set ( dmx_ts_feed_t&#x22C6; feed, __u16 pid, size_t
+ callback_length, size_t circular_buffer_size, int
+ descramble, struct timespec timeout);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>PID value to filter. Only the TS packets carrying the
+ specified PID will be passed to the API client.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ callback_length</para>
+</entry><entry
+ align="char">
+<para>Number of bytes to deliver with each call to the
+ dmx_ts_cb() callback function. The value of this
+ parameter should be a multiple of 188.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ circular_buffer_size</para>
+</entry><entry
+ align="char">
+<para>Size of the circular buffer for the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int descramble</para>
+</entry><entry
+ align="char">
+<para>If non-zero, descramble the filtered TS packets.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct timespec
+ timeout</para>
+</entry><entry
+ align="char">
+<para>Maximum time to wait before delivering received TS
+ packets to the client.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Not enough memory for the requested buffer size.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available for TS.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>start_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Starts filtering TS packets on this TS feed, according to its settings. The PID
+ value to filter can be set by the API client. All matching TS packets are
+ delivered asynchronously to the client, using the callback function registered
+ with allocate_ts_feed().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int start_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>stop_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Stops filtering TS packets on this TS feed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int stop_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_ts_feed_t* feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the TS feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>
+<section id="section_feed_api">
+<title>Section Feed API</title>
+<para>A section feed is a resource consisting of a PID filter and a set of section filters. Using this
+API, the client can set the properties of a section feed and to start/stop filtering. The API is
+defined as an abstract interface of the type dmx_section_feed_t. The functions that implement
+the interface should be defined static or module private. The client can get the handle of
+a section feed API by calling the function allocate_section_feed() in the demux
+API.
+</para>
+<para>On demux platforms that provide section filtering in hardware, the Section Feed API
+implementation provides a software wrapper for the demux hardware. Other platforms may
+support only PID filtering in hardware, requiring that TS packets are converted to sections in
+software. In the latter case the Section Feed API implementation can be a client of the TS
+Feed API.
+</para>
+
+</section>
+<section id="kdapi_set">
+<title>set()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function sets the parameters of a section feed. Any filtering in progress on
+ the section feed must be stopped before calling this function. If descrambling
+ is enabled, the payload_scrambling_control and address_scrambling_control
+ fields of received DVB datagram sections should be observed. If either one is
+ non-zero, the section should be descrambled either in hardware or using the
+ functions descramble_mac_address() and descramble_section_payload() of the
+ demux API. Note that according to the MPEG-2 Systems specification, only
+ the payloads of private sections can be scrambled while the rest of the section
+ data must be sent in the clear.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int set(dmx_section_feed_t&#x22C6; feed, __u16 pid, size_t
+ circular_buffer_size, int descramble, int
+ check_crc);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 pid</para>
+</entry><entry
+ align="char">
+<para>PID value to filter; only the TS packets carrying the
+ specified PID will be accepted.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t
+ circular_buffer_size</para>
+</entry><entry
+ align="char">
+<para>Size of the circular buffer for filtered sections.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int descramble</para>
+</entry><entry
+ align="char">
+<para>If non-zero, descramble any sections that are scrambled.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int check_crc</para>
+</entry><entry
+ align="char">
+<para>If non-zero, check the CRC values of filtered sections.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Not enough memory for the requested buffer size.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSYS</para>
+</entry><entry
+ align="char">
+<para>No descrambling facility available for sections.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>allocate_filter()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function is used to allocate a section filter on the demux. It should only be
+ called when no filtering is in progress on this section feed. If a filter cannot be
+ allocated, the function fails with -ENOSPC. See in section ?? for the format of
+ the section filter.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The bitfields filter_mask and filter_value should only be modified when no
+ filtering is in progress on this section feed. filter_mask controls which bits of
+ filter_value are compared with the section headers/payload. On a binary value
+ of 1 in filter_mask, the corresponding bits are compared. The filter only accepts
+ sections that are equal to filter_value in all the tested bit positions. Any changes
+ to the values of filter_mask and filter_value are guaranteed to take effect only
+ when the start_filtering() function is called next time. The parent pointer in
+ the struct is initialized by the API implementation to the value of the feed
+ parameter. The priv pointer is not used by the API implementation, and can
+ thus be freely utilized by the caller of this function. Any data pointed to by the
+ priv pointer is available to the recipient of the dmx_section_cb() function call.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>While the maximum section filter length (DMX_MAX_FILTER_SIZE) is
+ currently set at 16 bytes, hardware filters of that size are not available on all
+ platforms. Therefore, section filtering will often take place first in hardware,
+ followed by filtering in software for the header bytes that were not covered
+ by a hardware filter. The filter_mask field can be checked to determine how
+ many bytes of the section filter are actually used, and if the hardware filter will
+ suffice. Additionally, software-only section filters can optionally be allocated
+ to clients when all hardware section filters are in use. Note that on most demux
+ hardware it is not possible to filter on the section_length field of the section
+ header &#8211; thus this field is ignored, even though it is included in filter_value and
+ filter_mask fields.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int allocate_filter(dmx_section_feed_t&#x22C6; feed,
+ dmx_section_filter_t&#x22C6;&#x22C6; filter);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t**
+ filter</para>
+</entry><entry
+ align="char">
+<para>Pointer to the allocated filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENOSPC</para>
+</entry><entry
+ align="char">
+<para>No filters of given type and length available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameters.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>release_filter()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This function releases all the resources of a previously allocated section filter.
+ The function should not be called while filtering is in progress on this section
+ feed. After calling this function, the caller should not try to dereference the
+ filter pointer.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int release_filter ( dmx_section_feed_t&#x22C6; feed,
+ dmx_section_filter_t&#x22C6; filter);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_section_filter_t*
+ filter</para>
+</entry><entry
+ align="char">
+<para>I/O Pointer to the instance data of a section filter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-ENODEV</para>
+</entry><entry
+ align="char">
+<para>No such filter allocated.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>start_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Starts filtering sections on this section feed, according to its settings. Sections
+ are first filtered based on their PID and then matched with the section
+ filters allocated for this feed. If the section matches the PID filter and
+ at least one section filter, it is delivered to the API client. The section
+ is delivered asynchronously using the callback function registered with
+ allocate_section_feed().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int start_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section
+role="subsection"><title>stop_filtering()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>Stops filtering sections on this section feed. Note that any changes to the
+ filtering parameters (filter_value, filter_mask, etc.) should only be made when
+ filtering is stopped.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int stop_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>dmx_section_feed_t*
+ feed</para>
+</entry><entry
+ align="char">
+<para>Pointer to the section feed API and instance data.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURNS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>0</para>
+</entry><entry
+ align="char">
+<para>The function was completed without errors.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>-EINVAL</para>
+</entry><entry
+ align="char">
+<para>Bad parameter.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>

linux-imx/Documentation/DocBook/media/dvb/net.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/net.xml b/linux-imx/Documentation/DocBook/media/dvb/net.xml
new file mode 100644
index 0000000..a193e86
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/net.xml
@@ -0,0 +1,156 @@
+<title>DVB Network API</title>
+<para>The DVB net device enables feeding of MPE (multi protocol encapsulation) packets
+received via DVB into the Linux network protocol stack, e.g. for internet via satellite
+applications. It can be accessed through <emphasis role="tt">/dev/dvb/adapter0/net0</emphasis>. Data types and
+and ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/net.h</emphasis> in your
+application.
+</para>
+<section id="dvb_net_types">
+<title>DVB Net Data Types</title>
+
+<section id="dvb-net-if">
+<title>struct dvb_net_if</title>
+<programlisting>
+struct dvb_net_if {
+	__u16 pid;
+	__u16 if_num;
+	__u8  feedtype;
+#define DVB_NET_FEEDTYPE_MPE 0	/&#x22C6; multi protocol encapsulation &#x22C6;/
+#define DVB_NET_FEEDTYPE_ULE 1	/&#x22C6; ultra lightweight encapsulation &#x22C6;/
+};
+</programlisting>
+</section>
+
+</section>
+<section id="net_fcalls">
+<title>DVB net Function Calls</title>
+<para>To be written&#x2026;
+</para>
+
+<section id="NET_ADD_IF"
+role="subsection"><title>NET_ADD_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_ADD_IF,
+ struct dvb_net_if *if);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_ADD_IF for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dvb_net_if *if
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="NET_REMOVE_IF"
+role="subsection"><title>NET_REMOVE_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_REMOVE_IF);
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_REMOVE_IF for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="NET_GET_IF"
+role="subsection"><title>NET_GET_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_GET_IF,
+ struct dvb_net_if *if);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_GET_IF for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dvb_net_if *if
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+</section>

linux-imx/Documentation/DocBook/media/dvb/video.xml

diff --git a/linux-imx/Documentation/DocBook/media/dvb/video.xml b/linux-imx/Documentation/DocBook/media/dvb/video.xml
new file mode 100644
index 0000000..3ea1ca7
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvb/video.xml
@@ -0,0 +1,1968 @@
+<title>DVB Video Device</title>
+<para>The DVB video device controls the MPEG2 video decoder of the DVB hardware. It
+can be accessed through <emphasis role="tt">/dev/dvb/adapter0/video0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+application.
+</para>
+<para>Note that the DVB video device only controls decoding of the MPEG video stream, not
+its presentation on the TV or computer screen. On PCs this is typically handled by an
+associated video4linux device, e.g. <emphasis role="tt">/dev/video</emphasis>, which allows scaling and defining output
+windows.
+</para>
+<para>Some DVB cards don&#8217;t have their own MPEG decoder, which results in the omission of
+the audio and video device as well as the video4linux device.
+</para>
+<para>The ioctls that deal with SPUs (sub picture units) and navigation packets are only
+supported on some MPEG decoders made for DVD playback.
+</para>
+<para>
+These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use
+of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls
+have been created to replace that functionality.</para>
+<section id="video_types">
+<title>Video Data Types</title>
+
+<section id="video-format-t">
+<title>video_format_t</title>
+<para>The <emphasis role="tt">video_format_t</emphasis> data type defined by
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_FORMAT_4_3,     /&#x22C6; Select 4:3 format &#x22C6;/
+	VIDEO_FORMAT_16_9,    /&#x22C6; Select 16:9 format. &#x22C6;/
+	VIDEO_FORMAT_221_1    /&#x22C6; 2.21:1 &#x22C6;/
+} video_format_t;
+</programlisting>
+<para>is used in the VIDEO_SET_FORMAT function (??) to tell the driver which aspect ratio
+the output hardware (e.g. TV) has. It is also used in the data structures video_status
+(??) returned by VIDEO_GET_STATUS (??) and video_event (??) returned by
+VIDEO_GET_EVENT (??) which report about the display format of the current video
+stream.
+</para>
+</section>
+
+<section id="video-displayformat-t">
+<title>video_displayformat_t</title>
+<para>In case the display format of the video stream and of the display hardware differ the
+application has to specify how to handle the cropping of the picture. This can be done using
+the VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_PAN_SCAN,       /&#x22C6; use pan and scan format &#x22C6;/
+	VIDEO_LETTER_BOX,     /&#x22C6; use letterbox format &#x22C6;/
+	VIDEO_CENTER_CUT_OUT  /&#x22C6; use center cut out format &#x22C6;/
+} video_displayformat_t;
+</programlisting>
+<para>as argument.
+</para>
+</section>
+
+<section id="video-stream-source-t">
+<title>video_stream_source_t</title>
+<para>The video stream source is set through the VIDEO_SELECT_SOURCE call and can take
+the following values, depending on whether we are replaying from an internal (demuxer) or
+external (user write) source.
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_SOURCE_DEMUX, /&#x22C6; Select the demux as the main source &#x22C6;/
+	VIDEO_SOURCE_MEMORY /&#x22C6; If this source is selected, the stream
+			       comes from the user through the write
+			       system call &#x22C6;/
+} video_stream_source_t;
+</programlisting>
+<para>VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
+DVR device) as the source of the video stream. If VIDEO_SOURCE_MEMORY
+is selected the stream comes from the application through the <emphasis role="tt">write()</emphasis> system
+call.
+</para>
+</section>
+
+<section id="video-play-state-t">
+<title>video_play_state_t</title>
+<para>The following values can be returned by the VIDEO_GET_STATUS call representing the
+state of video playback.
+</para>
+<programlisting>
+typedef enum {
+	VIDEO_STOPPED, /&#x22C6; Video is stopped &#x22C6;/
+	VIDEO_PLAYING, /&#x22C6; Video is currently playing &#x22C6;/
+	VIDEO_FREEZED  /&#x22C6; Video is freezed &#x22C6;/
+} video_play_state_t;
+</programlisting>
+</section>
+
+<section id="video-command">
+<title>struct video_command</title>
+<para>The structure must be zeroed before use by the application
+This ensures it can be extended safely in the future.</para>
+<programlisting>
+struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/&#x22C6; 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   &gt;>1: playback at speed/1000 of the normal speed,
+			   &lt;-1: reverse playback at (-speed/1000) of the normal speed. &#x22C6;/
+			__s32 speed;
+			__u32 format;
+		} play;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+</programlisting>
+</section>
+
+<section id="video-size-t">
+<title>video_size_t</title>
+<programlisting>
+typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+} video_size_t;
+</programlisting>
+</section>
+
+
+<section id="video-event">
+<title>struct video_event</title>
+<para>The following is the structure of a video event as it is returned by the VIDEO_GET_EVENT
+call.
+</para>
+<programlisting>
+struct video_event {
+	__s32 type;
+#define VIDEO_EVENT_SIZE_CHANGED	1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+#define VIDEO_EVENT_DECODER_STOPPED 	3
+#define VIDEO_EVENT_VSYNC 		4
+	__kernel_time_t timestamp;
+	union {
+		video_size_t size;
+		unsigned int frame_rate;	/&#x22C6; in frames per 1000sec &#x22C6;/
+		unsigned char vsync_field;	/&#x22C6; unknown/odd/even/progressive &#x22C6;/
+	} u;
+};
+</programlisting>
+</section>
+
+<section id="video-status">
+<title>struct video_status</title>
+<para>The VIDEO_GET_STATUS call returns the following structure informing about various
+states of the playback operation.
+</para>
+<programlisting>
+struct video_status {
+	int                   video_blank;   /&#x22C6; blank video on freeze? &#x22C6;/
+	video_play_state_t    play_state;    /&#x22C6; current state of playback &#x22C6;/
+	video_stream_source_t stream_source; /&#x22C6; current source (demux/memory) &#x22C6;/
+	video_format_t        video_format;  /&#x22C6; current aspect ratio of stream &#x22C6;/
+	video_displayformat_t display_format;/&#x22C6; selected cropping mode &#x22C6;/
+};
+</programlisting>
+<para>If video_blank is set video will be blanked out if the channel is changed or if playback is
+stopped. Otherwise, the last picture will be displayed. play_state indicates if the video is
+currently frozen, stopped, or being played back. The stream_source corresponds to the seleted
+source for the video stream. It can come either from the demultiplexer or from memory.
+The video_format indicates the aspect ratio (one of 4:3 or 16:9) of the currently
+played video stream. Finally, display_format corresponds to the selected cropping
+mode in case the source video format is not the same as the format of the output
+device.
+</para>
+</section>
+
+<section id="video-still-picture">
+<title>struct video_still_picture</title>
+<para>An I-frame displayed via the VIDEO_STILLPICTURE call is passed on within the
+following structure.
+</para>
+<programlisting>
+/&#x22C6; pointer to and size of a single iframe in memory &#x22C6;/
+struct video_still_picture {
+	char &#x22C6;iFrame;        /&#x22C6; pointer to a single iframe in memory &#x22C6;/
+	int32_t size;
+};
+</programlisting>
+</section>
+
+<section id="video_caps">
+<title>video capabilities</title>
+<para>A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the following
+bits set according to the hardwares capabilities.
+</para>
+<programlisting>
+ /&#x22C6; bit definitions for capabilities: &#x22C6;/
+ /&#x22C6; can the hardware decode MPEG1 and/or MPEG2? &#x22C6;/
+ #define VIDEO_CAP_MPEG1   1
+ #define VIDEO_CAP_MPEG2   2
+ /&#x22C6; can you send a system and/or program stream to video device?
+    (you still have to open the video and the audio device but only
+     send the stream to the video device) &#x22C6;/
+ #define VIDEO_CAP_SYS     4
+ #define VIDEO_CAP_PROG    8
+ /&#x22C6; can the driver also handle SPU, NAVI and CSS encoded data?
+    (CSS API is not present yet) &#x22C6;/
+ #define VIDEO_CAP_SPU    16
+ #define VIDEO_CAP_NAVI   32
+ #define VIDEO_CAP_CSS    64
+</programlisting>
+</section>
+
+<section id="video-system">
+<title>video_system_t</title>
+<para>A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The
+following system types can be set:
+</para>
+<programlisting>
+typedef enum {
+	 VIDEO_SYSTEM_PAL,
+	 VIDEO_SYSTEM_NTSC,
+	 VIDEO_SYSTEM_PALN,
+	 VIDEO_SYSTEM_PALNc,
+	 VIDEO_SYSTEM_PALM,
+	 VIDEO_SYSTEM_NTSC60,
+	 VIDEO_SYSTEM_PAL60,
+	 VIDEO_SYSTEM_PALM60
+} video_system_t;
+</programlisting>
+</section>
+
+<section id="video-highlight">
+<title>struct video_highlight</title>
+<para>Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight information. The
+call expects the following format for that information:
+</para>
+<programlisting>
+ typedef
+ struct video_highlight {
+	 boolean active;      /&#x22C6;    1=show highlight, 0=hide highlight &#x22C6;/
+	 uint8_t contrast1;   /&#x22C6;    7- 4  Pattern pixel contrast &#x22C6;/
+			      /&#x22C6;    3- 0  Background pixel contrast &#x22C6;/
+	 uint8_t contrast2;   /&#x22C6;    7- 4  Emphasis pixel-2 contrast &#x22C6;/
+			      /&#x22C6;    3- 0  Emphasis pixel-1 contrast &#x22C6;/
+	 uint8_t color1;      /&#x22C6;    7- 4  Pattern pixel color &#x22C6;/
+			      /&#x22C6;    3- 0  Background pixel color &#x22C6;/
+	 uint8_t color2;      /&#x22C6;    7- 4  Emphasis pixel-2 color &#x22C6;/
+			      /&#x22C6;    3- 0  Emphasis pixel-1 color &#x22C6;/
+	 uint32_t ypos;       /&#x22C6;   23-22  auto action mode &#x22C6;/
+			      /&#x22C6;   21-12  start y &#x22C6;/
+			      /&#x22C6;    9- 0  end y &#x22C6;/
+	 uint32_t xpos;       /&#x22C6;   23-22  button color number &#x22C6;/
+			      /&#x22C6;   21-12  start x &#x22C6;/
+			      /&#x22C6;    9- 0  end x &#x22C6;/
+ } video_highlight_t;
+</programlisting>
+
+</section>
+<section id="video-spu">
+<title>struct video_spu</title>
+<para>Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the
+following format:
+</para>
+<programlisting>
+ typedef
+ struct video_spu {
+	 boolean active;
+	 int stream_id;
+ } video_spu_t;
+</programlisting>
+
+</section>
+<section id="video-spu-palette">
+<title>struct video_spu_palette</title>
+<para>The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE:
+</para>
+<programlisting>
+ typedef
+ struct video_spu_palette {
+	 int length;
+	 uint8_t &#x22C6;palette;
+ } video_spu_palette_t;
+</programlisting>
+
+</section>
+<section id="video-navi-pack">
+<title>struct video_navi_pack</title>
+<para>In order to get the navigational data the following structure has to be passed to the ioctl
+VIDEO_GET_NAVI:
+</para>
+<programlisting>
+ typedef
+ struct video_navi_pack {
+	 int length;         /&#x22C6; 0 ... 1024 &#x22C6;/
+	 uint8_t data[1024];
+ } video_navi_pack_t;
+</programlisting>
+</section>
+
+
+<section id="video-attributes-t">
+<title>video_attributes_t</title>
+<para>The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES:
+</para>
+<programlisting>
+ typedef uint16_t video_attributes_t;
+ /&#x22C6;   bits: descr. &#x22C6;/
+ /&#x22C6;   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) &#x22C6;/
+ /&#x22C6;   13-12 TV system (0=525/60, 1=625/50) &#x22C6;/
+ /&#x22C6;   11-10 Aspect ratio (0=4:3, 3=16:9) &#x22C6;/
+ /&#x22C6;    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca &#x22C6;/
+ /&#x22C6;    7    line 21-1 data present in GOP (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    6    line 21-2 data present in GOP (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 &#x22C6;/
+ /&#x22C6;    2    source letterboxed (1=yes, 0=no) &#x22C6;/
+ /&#x22C6;    0    film/camera mode (0=camera, 1=film (625/50 only)) &#x22C6;/
+</programlisting>
+</section></section>
+
+
+<section id="video_function_calls">
+<title>Video Function Calls</title>
+
+
+<section id="video_fopen">
+<title>open()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call opens a named video device (e.g. /dev/dvb/adapter0/video0)
+ for subsequent use.</para>
+<para>When an open() call has succeeded, the device will be ready for use.
+ The significance of blocking or non-blocking mode is described in the
+ documentation for functions where there is a difference. It does not affect the
+ semantics of the open() call itself. A device opened in blocking mode can later
+ be put into non-blocking mode (and vice versa) using the F_SETFL command
+ of the fcntl system call. This is a standard system call, documented in the Linux
+ manual page for fcntl. Only one user can open the Video Device in O_RDWR
+ mode. All other attempts to open the device in this mode will fail, and an
+ error-code will be returned. If the Video Device is opened in O_RDONLY
+ mode, the only ioctl call that can be used is VIDEO_GET_STATUS. All other
+ call will return an error code.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="video_fclose">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened video device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+<section id="video_fwrite">
+<title>write()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call can only be used if VIDEO_SOURCE_MEMORY is selected
+ in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in
+ PES format, unless the capability allows other formats. If O_NONBLOCK is
+ not specified the function will block until buffer space is available. The amount
+ of data to be transferred is implied by count.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>size_t write(int fd, const void &#x22C6;buf, size_t count);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>void *buf</para>
+</entry><entry
+ align="char">
+<para>Pointer to the buffer containing the PES data.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>size_t count</para>
+</entry><entry
+ align="char">
+<para>Size of buf.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>RETURN VALUE</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOMEM</para>
+</entry><entry
+ align="char">
+<para>Attempted to write more data than the internal buffer can
+ hold.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_STOP"
+role="subsection"><title>VIDEO_STOP</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to stop playing the current stream.
+ Depending on the input parameter, the screen can be blanked out or displaying
+ the last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_STOP, boolean
+ mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_STOP for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Boolean mode</para>
+</entry><entry
+ align="char">
+<para>Indicates how the screen shall be handled.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>TRUE: Blank screen when stop.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE: Show last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_PLAY"
+role="subsection"><title>VIDEO_PLAY</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to start playing a video stream from the
+ selected source.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_PLAY);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_PLAY for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_FREEZE"
+role="subsection"><title>VIDEO_FREEZE</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call suspends the live video stream being played. Decoding
+ and playing are frozen. It is then possible to restart the decoding
+ and playing process of the video stream using the VIDEO_CONTINUE
+ command. If VIDEO_SOURCE_MEMORY is selected in the ioctl call
+ VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more
+ data until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_FREEZE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_FREEZE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_CONTINUE"
+role="subsection"><title>VIDEO_CONTINUE</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call restarts decoding and playing processes of the video stream
+ which was played before a call to VIDEO_FREEZE was made.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_CONTINUE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_CONTINUE for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SELECT_SOURCE"
+role="subsection"><title>VIDEO_SELECT_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. This ioctl was also supported by the
+V4L2 ivtv driver, but that has been replaced by the ivtv-specific
+<constant>IVTV_IOC_PASSTHROUGH_MODE</constant> ioctl.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call informs the video device which source shall be used for the input
+ data. The possible sources are demux or memory. If memory is selected, the
+ data is fed to the video device through the write command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SELECT_SOURCE,
+ video_stream_source_t source);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SELECT_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_stream_source_t
+ source</para>
+</entry><entry
+ align="char">
+<para>Indicates which source shall be used for the Video stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_BLANK"
+role="subsection"><title>VIDEO_SET_BLANK</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to blank out the picture.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SET_BLANK, boolean
+ mode);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_BLANK for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>boolean mode</para>
+</entry><entry
+ align="char">
+<para>TRUE: Blank screen when stop.</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>FALSE: Show last decoded frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_STATUS"
+role="subsection"><title>VIDEO_GET_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to return the current status of the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_STATUS, struct
+ video_status &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_STATUS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_status
+ *status</para>
+</entry><entry
+ align="char">
+<para>Returns the current status of the Video Device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_FRAME_COUNT"
+role="subsection"><title>VIDEO_GET_FRAME_COUNT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this
+ioctl has been replaced by the <constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant> control.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to return the number of displayed frames
+since the decoder was started.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_GET_FRAME_COUNT, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_FRAME_COUNT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the number of frames displayed since the decoder was started.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_PTS"
+role="subsection"><title>VIDEO_GET_PTS</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this
+ioctl has been replaced by the <constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant> control.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to return the current PTS timestamp.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_GET_PTS, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_PTS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+</para>
+<para>
+The PTS should belong to the currently played
+frame if possible, but may also be a value close to it
+like the PTS of the last decoded frame or the last PTS
+extracted by the PES parser.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_FRAME_RATE"
+role="subsection"><title>VIDEO_GET_FRAME_RATE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to return the current framerate.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_GET_FRAME_RATE, unsigned int *rate);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_FRAME_RATE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned int *rate
+</para>
+</entry><entry
+ align="char">
+<para>Returns the framerate in number of frames per 1000 seconds.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_EVENT"
+role="subsection"><title>VIDEO_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is for DVB devices only. To get events from a V4L2 decoder use the V4L2
+&VIDIOC-DQEVENT; ioctl instead.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns an event of type video_event if available. If an event is
+ not available, the behavior depends on whether the device is in blocking or
+ non-blocking mode. In the latter case, the call fails immediately with errno
+ set to EWOULDBLOCK. In the former case, the call blocks until an event
+ becomes available. The standard Linux poll() and/or select() system calls can
+ be used with the device file descriptor to watch for new events. For select(),
+ the file descriptor should be included in the exceptfds argument, and for
+ poll(), POLLPRI should be specified as the wake-up condition. Read-only
+ permissions are sufficient for this ioctl call.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_EVENT, struct
+ video_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_EVENT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_event
+ *ev</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the event, if any, is to be
+ stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+<para>Overflow in event queue - one or more events were lost.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_COMMAND"
+role="subsection"><title>VIDEO_COMMAND</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this
+ioctl has been replaced by the &VIDIOC-DECODER-CMD; ioctl.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl commands the decoder. The <constant>video_command</constant> struct
+is a subset of the <constant>v4l2_decoder_cmd</constant> struct, so refer to the
+&VIDIOC-DECODER-CMD; documentation for more information.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_COMMAND, struct video_command *cmd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_COMMAND for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_command *cmd
+</para>
+</entry><entry
+ align="char">
+<para>Commands the decoder.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_TRY_COMMAND"
+role="subsection"><title>VIDEO_TRY_COMMAND</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this
+ioctl has been replaced by the &VIDIOC-TRY-DECODER-CMD; ioctl.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl tries a decoder command. The <constant>video_command</constant> struct
+is a subset of the <constant>v4l2_decoder_cmd</constant> struct, so refer to the
+&VIDIOC-TRY-DECODER-CMD; documentation for more information.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_TRY_COMMAND, struct video_command *cmd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_TRY_COMMAND for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct video_command *cmd
+</para>
+</entry><entry
+ align="char">
+<para>Try a decoder command.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_GET_SIZE"
+role="subsection"><title>VIDEO_GET_SIZE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl returns the size and aspect ratio.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ VIDEO_GET_SIZE, video_size_t *size);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_SIZE for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_size_t *size
+</para>
+</entry><entry
+ align="char">
+<para>Returns the size and aspect ratio.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_DISPLAY_FORMAT"
+role="subsection"><title>VIDEO_SET_DISPLAY_FORMAT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to select the video format to be applied
+ by the MPEG chip on the video.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request =
+ VIDEO_SET_DISPLAY_FORMAT, video_display_format_t
+ format);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_DISPLAY_FORMAT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_display_format_t
+ format</para>
+</entry><entry
+ align="char">
+<para>Selects the video format to be used.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_STILLPICTURE"
+role="subsection"><title>VIDEO_STILLPICTURE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to display a still picture (I-frame). The
+ input data shall contain an I-frame. If the pointer is NULL, then the current
+ displayed still picture is blanked.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_STILLPICTURE,
+ struct video_still_picture &#x22C6;sp);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_STILLPICTURE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ video_still_picture
+ *sp</para>
+</entry><entry
+ align="char">
+<para>Pointer to a location where an I-frame and size is stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_FAST_FORWARD"
+role="subsection"><title>VIDEO_FAST_FORWARD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Video Device to skip decoding of N number of I-frames.
+ This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_FAST_FORWARD, int
+ nFrames);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_FAST_FORWARD for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int nFrames</para>
+</entry><entry
+ align="char">
+<para>The number of frames to skip.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SLOWMOTION"
+role="subsection"><title>VIDEO_SLOWMOTION</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the video device to repeat decoding frames N number of
+ times. This call can only be used if VIDEO_SOURCE_MEMORY is selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SLOWMOTION, int
+ nFrames);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SLOWMOTION for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int nFrames</para>
+</entry><entry
+ align="char">
+<para>The number of times to repeat each frame.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_GET_CAPABILITIES"
+role="subsection"><title>VIDEO_GET_CAPABILITIES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the video device about its decoding capabilities. On success
+ it returns and integer which has bits set according to the defines in section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_GET_CAPABILITIES,
+ unsigned int &#x22C6;cap);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_CAPABILITIES for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>unsigned int *cap</para>
+</entry><entry
+ align="char">
+<para>Pointer to a location where to store the capability
+ information.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_ID"
+role="subsection"><title>VIDEO_SET_ID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl selects which sub-stream is to be decoded if a program or system
+ stream is sent to the video device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = VIDEO_SET_ID, int
+ id);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_ID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int id</para>
+</entry><entry
+ align="char">
+<para>video sub-stream id</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid sub-stream id.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_CLEAR_BUFFER"
+role="subsection"><title>VIDEO_CLEAR_BUFFER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call clears all video buffers in the driver and in the decoder hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_CLEAR_BUFFER);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_CLEAR_BUFFER for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_STREAMTYPE"
+role="subsection"><title>VIDEO_SET_STREAMTYPE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl tells the driver which kind of stream to expect being written to it. If
+ this call is not used the default of video PES is used. Some drivers might not
+ support this call and always expect PES.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = VIDEO_SET_STREAMTYPE,
+ int type);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_STREAMTYPE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int type</para>
+</entry><entry
+ align="char">
+<para>stream type</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_FORMAT"
+role="subsection"><title>VIDEO_SET_FORMAT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the screen format (aspect ratio) of the connected output device
+ (TV) so that the output of the decoder can be adjusted accordingly.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_FORMAT,
+ video_format_t format);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_FORMAT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_format_t
+ format</para>
+</entry><entry
+ align="char">
+<para>video format of TV as defined in section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>format is not a valid video format.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_SYSTEM"
+role="subsection"><title>VIDEO_SET_SYSTEM</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the television output format. The format (see section ??) may
+ vary from the color format of the displayed MPEG stream. If the hardware is
+ not able to display the requested format the call will return an error.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SYSTEM ,
+ video_system_t system);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_FORMAT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_system_t
+ system</para>
+</entry><entry
+ align="char">
+<para>video system of TV output.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>system is not a valid or supported video system.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_HIGHLIGHT"
+role="subsection"><title>VIDEO_SET_HIGHLIGHT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the SPU highlight information for the menu access of a DVD.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT
+ ,video_highlight_t &#x22C6;vhilite)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_HIGHLIGHT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_highlight_t
+ *vhilite</para>
+</entry><entry
+ align="char">
+<para>SPU Highlight information according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="VIDEO_SET_SPU"
+role="subsection"><title>VIDEO_SET_SPU</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl activates or deactivates SPU decoding in a DVD input stream. It can
+ only be used, if the driver is able to handle a DVD stream.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SPU ,
+ video_spu_t &#x22C6;spu)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_SPU for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_spu_t *spu</para>
+</entry><entry
+ align="char">
+<para>SPU decoding (de)activation and subid setting according
+ to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid spu setting or driver cannot handle
+ SPU.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_SPU_PALETTE"
+role="subsection"><title>VIDEO_SET_SPU_PALETTE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl sets the SPU color palette.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE
+ ,video_spu_palette_t &#x22C6;palette )</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_SPU_PALETTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_spu_palette_t
+ *palette</para>
+</entry><entry
+ align="char">
+<para>SPU palette according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid palette or driver doesn&#8217;t handle SPU.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_GET_NAVI"
+role="subsection"><title>VIDEO_GET_NAVI</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl returns navigational information from the DVD stream. This is
+ especially needed if an encoded stream has to be decoded by the hardware.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_GET_NAVI ,
+ video_navi_pack_t &#x22C6;navipack)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_GET_NAVI for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_navi_pack_t
+ *navipack</para>
+</entry><entry
+ align="char">
+<para>PCI or DSI pack (private stream 2) according to section
+ ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>driver is not able to return navigational information</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section><section id="VIDEO_SET_ATTRIBUTES"
+role="subsection"><title>VIDEO_SET_ATTRIBUTES</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is intended for DVD playback and allows you to set certain
+ information about the stream. Some hardware may not need this information,
+ but the call also tells the hardware to prepare for DVD playback.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE
+ ,video_attributes_t vattr)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals VIDEO_SET_ATTRIBUTE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>video_attributes_t
+ vattr</para>
+</entry><entry
+ align="char">
+<para>video attributes according to section ??.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>input is not a valid attribute setting.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+ </section></section>

linux-imx/Documentation/DocBook/media/dvbstb.png.b64

diff --git a/linux-imx/Documentation/DocBook/media/dvbstb.png.b64 b/linux-imx/Documentation/DocBook/media/dvbstb.png.b64
new file mode 100644
index 0000000..e8b52fd
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/dvbstb.png.b64
@@ -0,0 +1,398 @@
+iVBORw0KGgoAAAANSUhEUgAAAzMAAAGaCAYAAAA7Jx25AAAABmJLR0QAAAAAAAD5Q7t/AAAACXBI
+WXMAAA3XAAANiQFmEOuiAAAgAElEQVR42uzdd1RU18I28GdgKFZUBE0saFA0KoqFFkEhKhbAQmxJ
+bIkNNEpMEUwsMZarJMZrw4KxRExQczUqil0jRBA1GAjGQqLYC4TemdnfH76cj3HodYDntxaLmTll
+zuw57Zmz9z4yIYQAkYZzcnJCSkoKGjZsyMIgIiIiquPS09PRoEEDyBhmqCaQyWRo06YN3nvvPRYG
+ERERUR137Ngx/Pnnn5CzKKgmMDAwwKpVqxhmiIiIiAj29vZ4//33ocWiICIiIiKimohhhoiIiIiI
+GGaIiIiIiIgYZoiIiIiIiBhmiIiIiIiIYYaIiIiIiIhhhoiIiIiIiGGGiIiIiIgYZoiIiIiIiBhm
+iIiIiIiIGGaIiIiIiIgYZoiIiIiIiGGGiIiIiIiIYYaIiIiIiIhhhoiIiIiIGGaIiIiIiIgYZoiI
+iIiIiBhmiIiIiIiIYYaIiIiIiIhhhoiIiIiIqFLIWQRElSMsLAy2trZo1KgR5HJualTxEhIS8P33
+3+PDDz+sM5+5bdu2ePDgAZo2bcoVgCplm3J0dMS5c+fqzGf++uuvsWTJEm5TVClSU1ORk5ODBw8e
+oHXr1gwzRDVJbm4uAGDRokUwMDBggVCFmzlzJrKysurUZ3727BksLCzg4eHBFYAq3IIFC5CQkFCn
+PnNGRgYAYNWqVVwBqMJFRUVh48aNUCqVlfYeDDNElWzGjBkMM1QpNm7cWOc+c8uWLTFjxgzMmDGD
+KwBVuLt37yIkJKTOfW5nZ2duU1SpYaYysc0MERERERHVSAwzRERERETEMENERERERMQwQ0RERERE
+xDBDREREREQMM0RERERERAwzREREREREDDNERERERMQwQ0RERERExDBDRERERETEMENERERERMQw
+Q0REREREDDNEREREREQMM0RERERERAwzRERERETEMENERERERMQwQ0RERERExDBDREREREQMM0RE
+RERERAwzREREREREDDNEREREREQMM0RERERExDBDRERERETEMENERERERMQwQ0REREREDDNERERE
+REQMM0RERERERAwzRERERETEMENERERERMQwQ0REREREVGnkLAKimunBgwdISkoq8/SGhoZ47bXX
+WJCV6NmzZwgMDMS5c+ewd+9eFgiVSVZWFkJCQnD16lU8evQICoUChoaG6NChA2xsbNCxY0fIZDI8
+efIEp06dwuTJk0s876CgIJiYmKBLly4saKq2Y5Wuri6aNm0KQ0NDaGnxd3ZimCGqE/78808EBgbi
+p59+QkJCgsowLS0tyGQy6blSqYQQQmWcjz/+GGvXrmVBVoKtW7di+/btuHbtGoQQMDQ0ZKFQqf37
+77/w8fHBtm3bkJCQgCZNmsDS0hLGxsZ48OABtm/fjidPnsDU1BR2dnYICwtDz549SxxmlEol5s6d
+CxsbG+zZs4cFTpV2rDpx4gQOHDiAJ0+eqAzT09ODUqlETk4OAEBfXx/dunWDvb093Nzc0LdvX5Vj
+GVFBGH+JaqihQ4di06ZNOHr0qMrrly5dgkKhQG5urvSnVCqRlZWF27dvY8mSJQCA7OxsFmIlmTFj
+Bs6ePctfu6nMTp48iTfffBOrV6+Gnp4e9uzZg+fPn+PUqVPw9/fHkSNH8PDhQxw9ehRCCOzevRu3
+bt1CWlpaqd4jJiYG+/btw+PHj1noVGnHqnXr1uHcuXMqr+/fvx8ZGRnIzs5GSkoKIiIi8M0330BH
+Rwdr166Fvb09evXqhdOnT7MQiWGGqDazsrJSeV5Y1TFdXV107NgRX331FSZPniz9ElbTnDp1SuOX
+USaToXHjxujevTtXUCq1H3/8EcOGDcPz58/RtWtXREREYMKECdDR0VE9gGtpwcXFBdeuXYONjQ0A
+ID09vcTvs2HDBgBATk4OfH19WfBUqTp16gS5/P9XCDI3N5euujRs2BAWFhb46KOP8Ntvv+HIkSNo
+3rw5rl+/DicnJ3z66adQKpUsRGKYIaqNdHR0Sl3HeNy4cTXyysyBAwdq1EkX635TaV29ehVTpkyB
+UqlEw4YNcfToUbRs2bLIaZo0aYIjR47AyMioxFdm7ty5g6CgIGhrawMAtmzZgoyMDH4BVGlkMhl0
+dXVLNJ6rqyvCwsLQqlUrAMB3332Hjz/+mIVIDDNEtfkgURqOjo5YunRpjfqMd+7cwfTp0/llU62l
+VCoxY8YM6arp/Pnz0b59+xJNa2RkBC8vrxJfmfH19YWVlRUmTJgAAIiPj2cnFaRRxypTU1McOnRI
+CtwbNmzA4cOHWYjEMENUl+Xm5iIhIQH6+vowMTEpcJz8HQUIIdQ6DijoBKy0CppnUfN59uwZnJ2d
+S9V7mxCiVMtW2mWqiPckyu/EiROIiIgAAGhra8Pd3b1U00+aNAlZWVnFjpeamoqdO3di9uzZmD17
+tvT6f//732K3d6KqZGlpiRkzZkjPvby8it3HlmY/XNh+v6jtoCTHRU1RlmNSac8BGGaIqEpduXIF
+CxYsUHs9MTERfn5+sLa2xrVr15CSkoJJkyZBX18fbdq0QWRkpMrOLTAwEMOHD4epqSnat2+Pxo0b
+o3///vDz8yu0LU5ubi7Onz8PDw8PmJubS+87d+5cGBoaQi6Xw8LCQq2x5+XLl2Fra4s7d+4AAEJD
+Q+Hi4gIXFxfMnz9fZdzs7Gz4+vrC2toa+vr60NHRQdeuXeHj41PgSV5Zl+lVx44dw8CBA/Haa6+h
+Q4cO6NmzJw4cOFBn17OgoCC1XouoeD/++KP02NbWFkZGRqWa3sjICDt37ix2PH9/f8jlcowdOxaW
+lpawtrYGAERHR+Ps2bP8IjRQaGgooqKi6mTYnDNnjvT41q1buHTpkto4pdn3CyFw7do1eHt7o127
+dkhMTIQQAv7+/rCwsIBcLkfTpk3x8ccfS9Wxc3NzsXnzZvTu3Ru6urqoX78+3n33XbWeRPfv34/x
+48dLx6jFixdLw5KSkjB37lwMHz5cGp6/hkRsbCzmz58vDcv7++KLL5Cbm4vDhw9j7Nix0utz587F
+s2fPylUWZTkH0NTURqTxDAwMxN69e2vUMgcHBwsAIjExsdLfS1tbWwAQAMTdu3cLHW/hwoVi5syZ
+0vMrV66IESNGCF1dXWn63377TfTv31/o6+tLry1YsEAIIUR6eroYPXq00NPTE7t37xY5OTlCCCFu
+374t+vbtKwCIHj16iNjYWJX3PXXqlHBycpLm16JFCxEdHS06duwoHB0dhYuLi6hfv74AIHR0dMQf
+f/whTfvXX3+J06dPC2NjYwFA2NraitOnT4vTp0+L8PBwabynT5+KPn36iOnTp4vIyEjx6NEjcejQ
+IdGiRQsBQPTt21ekpaVVyDLlUSgUYvbs2UIul4stW7aI7OxsIYQQ0dHRwsLCQjRq1EgAEIaGhpXy
+vZubmwtfX1+NW/fzyrRdu3Zi5syZIiAgQDx58qRC5t22bVuN/MwVoVWrVlLZeXp6Vsp7KJVK0bVr
+V+Hl5SW95u/vL72vs7NznT7WeHt7Czs7O41brmnTpgkAwsDAQIwYMUKsX79eREZGCqVSWSGfuaq+
+9wYNGkjr2l9//VXi6dq3by9Nt3jxYpVhpdn3X7p0SYwePVrI5XKV5Rg8eLCwsrIS7u7u4u2335aG
+ff755+LJkyfirbfeEo6OjmLWrFli1KhRQktLSwAQrq6uast67949af6DBw9WGx4dHS0ds18td6VS
+KZYtWya9f+/evVWGr1y5Uujq6oqAgIACv/vSHgdLew5QFpGRkQKA2nlBRQgMDBQGBgaCYYYYZmpZ
+mDl48KAIDQ2V/i5duiTOnj0rvv76a6Grq6sSZtLS0kR2drZ0oAQgnJycxKFDh0RqaqqYOHGiaNKk
+iTh9+rRQKpVi7NixAkCBJ5MpKSmic+fOAoDo1KmTSElJURtn6NChAoDQ19cXlpaWIiIiQhr2xx9/
+SJ9jypQpatOamJgIAGLEiBFqw7Kzs0WfPn3EqFGj1Hbw+/fvlz6bt7d3hS7TokWLBACxZs0atWGP
+Hz+WDtx1Lcw0a9ZMKnMdHR3pwF4R4aa2hpnk5GSpzApbpyrC2bNnhUwmU/nRIzMzU/qxAIC4efMm
+w4yG8fDwkE6gtbS0hJ6eXoWFm5oQZkaOHClNN3r06HLv+xcsWCANs7GxUflhTKlUSu/XoEEDYWlp
+KS5cuKAy/erVq6XpY2Ji1JbX1NS00DCT/3hWULkrlUoxZMgQ6bvOK6f09HTRsWNH8d133xU4z7KU
+RWnOARhmiBhmqizMFPeXP8zk+eGHH6ThX331VYHvcezYMQFANG3aVGRlZRU4zpEjR6T5fPHFF2rD
+P/roI2n4s2fP1Ib369dPCkOlCTNbt24VAMS5c+fUhmVmZkq/MDVt2lS6mlTeZbpx44bQ1tYWhoaG
+hZbH8OHD62SYMTIyKnT9K2+4qa1h5p9//lEpp61bt1bK+4waNarAX5PzgjkAMWvWLIYZDQwz+a8m
+5P8rb7ipCWFmxowZ0nSOjo7l3vdv375dml9YWJjatPv27ZOGb9q0SW34zZs3peG7du1SG96pU6ci
+w0xe2Cms3O/fvy9d2XdychJKpVJMmzZNODg4CIVCUeA05TkOluQcQJPDjJw1UYlql5s3b6o07hdC
+IC0tDZcuXcKHH35Y4DT5718xZMiQAsfJ6xLZysqq0O41hw0bBmNjYzx//hxbt27F0qVLVe4rkNcr
+DQAYGxurTZ/XDWd8fHypPrOfnx8AIDw8HNHR0WrDmzVrhsePHyMhIQE3btxQuf9LWZdp3bp1UCgU
+GDhwYKHl0ahRI66Qr8jfpurevXvYsWMHvv/+e+Tm5qJdu3YYPHgwHB0d0b9//2K7JK7NFApFhc8z
+NjYWhw8fxvHjx9WGzZw5EytXroRCocCuXbuwfPlyNG3alCtsDZB3U+S8dhlHjx7FiRMnkJWVBQMD
+Azg4OGDAgAFwcHBAt27dSt37pSbIv8z5j1dl3ffn3+83aNCg0P1+3jxe1aJFC+nxw4cPK/zztmnT
+Bt988w3c3d1x6tQpTJo0CYcPH0ZUVFShXf6X5zhYknMATcYwQ1TL6OnpQV9fX+W1evXqYfjw4Viw
+YIHUkL4w+Xfy+Q+WFy5cAAA0b968yGn79++PAwcOID4+HtHR0ejRo0eJlz1vJy1K0cg1OTkZ165d
+g7a2dqGNzseMGaP2HuVZJiGE1EVo586dq/Uk5v79+7h27ZpGrYO5ubllDjfff/89tm/fDoVCIYWb
+3r17w9XVtVaHm1eDQ1xcXIW/x5YtW/DGG29g0KBBBZ68ubm54cCBA0hPT8f27dvx+eef18l9aFpa
+msZtUy9evChzuDly5AiCgoKQnZ2Nxo0bw9HREf369YO9vT369OlTI76Tf//9V3r8+uuvV/q+v6Dj
+oMrJc74f6Srr/kzTp0/Hvn37cP78efj7+2Pjxo2F9kJakWVR3GdnmCGqQ4QG9jrz9ttv4+7du6We
+Lj4+XroZX3Enqp06dZIeP3z4sFRhpizu3r0rdT+5Zs2aKtkRv3jxAk+fPgVQvVdfsrOzsWrVKqxa
+tarWbDf516979+5h69atUkifOnVqpVyx0ARNmjSRrmoCQExMTIXOPyMjA35+flAoFCq/yL66nefZ
+sGED5s2bp3LSVlfcuHGjxpzkl/RYlNcrV3JyMg4fPiz9GOPo6CiFA01269Yt6XHv3r2rbd9flbS0
+tODn5wdzc3NkZGTg1KlTmDVrVoFX1mp7WTDMEFWDFy9eYPny5Rq3XD179sTGjRtLPV3+E8i8k/jC
+GBoaSo+rYoeaF7KEELh//36JbzJYHvl/Nc/MzKy271NPTw/ffvttodUHq4uZmVmZryzo6ekhKysL
+enp6sLS0hJOTE/r37w8bGxvo6uoiMDCw1u437OzscPDgQQAvu+KtSAEBAUhNTYWPj0+Rv8quWLEC
+T58+xYMHD3Do0CGVX3Prip49exZYFa86ffbZZ/jhhx9KddUzj46ODpRKJZRKJTp06IChQ4fCwcEB
+ffv2hbGxMRYsWIDExESNPp5GRUVJz11cXKpt31/V0tLSpOPvkSNHsG/fPowfP14jjoMMM0S12Llz
+5zBgwABMnTq11nym5s2bQ0dHBzk5OYiOjoYQotB61/lv0PXGG29U+rLVr19fehwSElIlO3E9PT3p
+8d9//11t34tMJkP9+vU1rm1Daerk6+vrIzMzUyW8ODo6Ftk2q7YaO3asFGbu3LmDqKgo6f5H5SGE
+wIYNGzBmzBjMnTu3yHHj4+Px1VdfAXh5E826GGby7jOiSfLvc4qjq6sLhUIBpVKJjh07YsiQIXBw
+cIC9vX2R1YQ11c6dO6WaDi4uLmjXrl217furUlZWFiZMmIClS5di48aNePToEebMmYMBAwao3YOq
+tpdFcXjTTKIKolQqsXz5cgwYMAAAMHz48Fp1cM+7sV5cXBxu3LhR6Lh59XVbtWqFjh07VvqymZqa
+SifPfn5+RVbvS01NxcyZM8v9nq1bt5YaTF64cIF3TS+FvPZcenp6sLOzwxdffIHg4GAkJycjODgY
+ixYtgp2dXZ0LMgDg5uamchLy3XffVch8L168iIiICEyfPr3YcWfOnCmt25cuXUJ4eDhXWg2nq6sL
+bW1tyGQymJmZwd3dHQcOHMCLFy9w69YtrFu3DqNGjaqRQebx48dSNVpdXV2sXr26Wvf9FaUkx4yF
+CxeicePGmD9/PjZv3iwdfz09PTXiOMgwQ1TLvHjxAoMGDcKSJUsAvLxjcUE9oFTWTjH/1ZDKOrH+
+4IMPpMcBAQGFjpd38uPu7l7qXnOKWva8eeXV/c7TqFEjKWgFBwdjz549BU6fm5uLKVOmwMnJqdzL
+pKenh/79+wN4WVc5KCioyGnrWtjJq/Lwanixt7dneCmCjo4ONm3aJD3ftWsXTp8+XeLpExMT4erq
+qnZX8NWrV8PMzAz29vbFzqNly5YYPXq09Hzt2rXcwWsApVIpVTcqaXjJX+W3Jp3E50lISMDIkSOR
+kJAAANi0aRO6dOlSZfv+8sirYp2enl5gGaSkpBQ5/a+//oqNGzfCz88PWlpacHV1xbvvvgsA+Omn
+n3D06NEqPQ4yzBDVcufPn0fXrl1x8eJFKJVKaGlp4bPPPquy909PT1c5QJSlZ5X8YaiwOtmTJk2C
+paUlAGDz5s0F1rG+ffs2goODYWZmhnnz5qkNL67xdl7PVgUd8PKqfdy+fVsanp2djcePH6v8UjVt
+2jSsX79e6s0HeFllx8XFBdnZ2XBzc6uQZcr/+Tw8PNS650xMTERISAiAl41uU1NT68w2kXcAfzW8
+XLx4keGlGEOHDsWaNWuk525ubiVqJxQaGgpLS0v069dPpdvYK1euICgoCGPGjCnxjwvvvfee9PjA
+gQPVWpWS/v8JsBCixoWXV/e1+dsYFhZshBA4deoU+vTpgytXrkBXVxfbtm3DtGnT1MYt674//zGv
+LMfE4n5AzLvCevnyZdy+fVulDFasWCHtIwu6DUFycjImT56MBQsW4M0335ReX7dunfQdu7u7qx2D
+y3McLMk5AMMMUS2kVCrx9ddfY+DAgYiPj0dubi7kcjnGjx+Ptm3bVtlynDx5UuV5YVcJipK/u+bf
+f/+9wHHkcjkOHTqETp06IT4+HhMmTFD5BT4hIQETJ05EmzZtEBgYWGDf/flPivJ6bcp/QPjzzz8B
+vOxONDk5WWW4ra2tNI/58+fj4MGDeOedd/Dvv/9i3LhxGDdunBQ+PD090bx5c/To0QOmpqYwMzND
+UlIS/P391U7oyrpMw4YNg4eHBwDg/v376NWrF1asWIHAwEBs27YNjo6OMDAwkA4O3bt3r3WX9gtz
+7do1ZGVlMbyU0SeffIJ9+/ahWbNmSE1NhaurK9zc3HDy5EmVX3pTU1MRFBSEd955By4uLli2bJlK
+d8qZmZmYNWuWtP2WVF6bhLyTr3nz5hV78keVa968eYiLi6tR4eVV58+fV1mP9u3bh5iYGPz999/4
+/fffcfjwYSxatAg9evTA4MGDce/ePbi5ueH69euFVpEs674/f2+BBQWK2NhY6XFB1aofPHggPX78
++LHa8LyaDNnZ2bCzs4OXlxe8vb1hbm4OIQQcHBwAAGFhYXj//fdx7Ngx6bxi2rRpUCqV8PLyUpmn
+kZGRVPvj8ePHmDJlikrwKM9xsCTnAJqe9ok0noGBgdi7d6/GLM+TJ0+Eg4OD2h2ZZTKZiIyMFEII
+ERwcLACIxMTESlkGPz8/MWjQoALvCm1nZyc+/fTTYudx5swZ4erqKrS0tKRp9fT0xKRJk8T27dsL
+nCYpKUnMmzdPNGrUSLz++utixowZ4sMPPxQmJibC3d1dxMXFqU0TGhoqxo8fr7KMXbp0EV9++aUQ
+QoiTJ08KJycnleE9e/YU27Ztk+YRGxsrWrduLQ1//fXXxfnz56XhOTk5YsmSJdJdk/P+DAwMxMKF
+C0VGRkaFL5NCoRDffPONaNq0qcp4JiYm4ty5c+L9998XhoaGwsPDQwQHBxd65+ayMjc3F76+vnVq
+X9C2bds685nj4uLEkiVLRNu2bVX2MYaGhqJZs2YCgGjTpo1YtGiR2na3f/9+0blzZ2k6uVwuRo0a
+JY4fP17o+/31119i8uTJol27dmr7lN69e4tffvml1pe5t7e3sLOzq1PblLe3d6F3oq+oY5WTk5PQ
+1dVVW6/y/zVu3Fh06dJFjB07VmzatEk8fPiwRPMvzb7/119/FbNmzRJ6enoq+2tvb28RGxsr/v77
+bzFv3jzRvHlzabiurq7w8PAQFy5cEBkZGeLzzz8X7du3V9m23N3dRWBgoPQ+SqVSLF26VOX43KxZ
+M+n44ezsLNq3by+8vb1FaGioyM3NFcHBweLtt98WAISRkZHw8fFR+Zznzp0TDg4OKp/R1tZWZZsu
+7XGwLOcApRUZGSkAiNjY2ApftwIDA4WBgYGQCbZcpRqgSZMm8PX1Van+UJ2/Lo0ZMwYpKSkq7Tfk
+cjkcHR1x6tQpAC97FLG3t0diYqL0C31tkpWVhT/++ANxcXFo2rQpevToodKjSmVIS0tDWFiY1PNV
+QT38ZGRk4Pr160hISICRkRG6d+9eqp6AyloW169fR1xcHIyNjdGzZ0/I5XLExMTAxMRE5e7KFal7
+9+7w8PCQrhDVBSYmJvD29q5Tn1kIgdu3b+PPP/9EXFwclEoljI2N0bVrV3Tq1KlG3tFdUy1YsAAh
+ISEIDg6uU585Kiqqxnd7Xh37/uK8ePEC169fR7169dCnTx+pDeE///yDdu3alfomzjWxLKKiotC9
+e3fExsZWeK2VY8eO4f3332fXzEQlpVAosGzZMixbtky6HPzq8C+++KLOlIeenh6srKyq9D0bNGgg
+9RZXmHr16klV0qqyLPIaX+bXoUMHbjhUbjKZDJ06dVK5IS0RVf++vzhGRkYYNGiQ2uuVfdsCTSyL
+ysQwQ1QCT58+xZgxYxAWFlZg3XEtLS1YWFhI9WCJiIiIqPKxAwCiYpw5cwbdunVDeHh4kb18LFy4
+kIVFRERExDBDVP0UCgUWL14MJycnJCQkqN3fJI9MJoOJiQlGjBjBQiMiIiKqQqxmRlSAR48eYfz4
+8QgLC5P69y+MtrY2vvjii0pryEdEREREDDNEJXLq1CkMHjwYurq6Jbp5lIGBASZNmsSCIyIiIqpi
+/CmZKB8hBPbv3w8AhVYry09XVxdeXl68ISARERERwwxR9ZLJZNi+fTvWr18PLS2tYquO6ejoYMaM
+GSw4IiIiIoYZIs0wZ84cnDlzBo0aNSr0hoe6urr46KOPauUNMYmIiIgYZohqMEdHR4SGhkJbW7vA
+O2wrlUp4enqyoIiIiIgYZog0z6pVq9CsWTO4uLhAW1tbel1XVxeTJ0/Ga6+9xkIiIiIiYpgh0izr
+1q1DQEAA/ve//+Hw4cNYvnw5tLS0IJPJkJ2dDS8vLxYSEREREcMMkWa5cOECPvvsM/j6+sLGxgYy
+mQze3t4IDAyEEAI2Njbo2LEjC4qIiIioGvE+M0SvuH//PsaOHYtp06Zh6tSpKsOGDh2KW7duISsr
+iwVFRERExDBDpDnS09Ph5uYGMzMzrFu3rsBxzMzMWFBEREREDDNEmsXDwwNPnz7F1atXeSNMIiIi
+IoYZopohr8H/r7/+ipYtW7JAiIiIiBhmiDRfXoP/LVu2wMbGhgVCREREVAOwNzOq84pq8E9ERERE
+DDNEGqkkDf6JiIiISDOxmhnVaWzwT0RERFQLwsz333+P77//Hg0aNGCpUIVTKBTIycnB//73Pxgb
+G2vEMrHBPxEREVEtCTMxMTEIDQ2Fl5cXS4UqXFRUFM6fP4/MzEyNWB42+CciIiKqRWEGAJydnbFq
+1SqWClVKmDl+/LhGLAsb/BMRERHVDuwAgOoUNvgnIiIiqj3YAQDVKWzwT0RERMQwQ1TjsME/ERER
+EcMMUY3DBv9EREREtQ/bzFCtxwb/RERERAwzRDUOG/wTERER1V6sZka1Ghv8ExERETHMENU4bPBP
+RERExDBDVOOwwT8RERFR7cc2M1TrsME/EREREcMMUY3DBv9EREREdQermVGtwgb/RERERAwzRDWO
+pjb4X716NQwMDPgFUYWLioqqc5/54cOHWL16NZKTk7kCUKXsr83Nzevc5z527BhWr17NFaAYycnJ
+uH//Ptq1a4eGDRuyQDTkOMUwQ7WCJjb4b9iwIUxMTHDixAloabFGJ1W8Nm3awMjIqE59ZkdHR9y/
+fx8HDhzgCkAVrl27dujZs2ed+sytWrVCmzZtuE29QqlUIi0tTeUvJycHMpkM+vr66NKlCwupBLKz
+s2FqalqptWUYZqjG09QG/xYWFrh37x6/IKIKdObMGRYCUQX66KOP8NFHH9XpMlAoFIiOjkZ4eDgu
+X76My5cv48aNGxBCoHPnznBycoKVlRVsbGwQFRWFhQsX4urVq1x5NATDDNVobPBPREREpfHo0SMp
+tFy+fBnXrhOJlUQAACAASURBVF1DamoqWrZsCWtra4wfPx42Njbo06cPGjdurDLtjRs3WIAMM0QV
+hw3+iYiIqDCpqam4evUqwsPDERYWhvDwcDx69Aj169dH7969YWVlhdmzZ8Pa2hpt27ZlgTHMEFUd
+TW3wT0RERFWvuOpi1tbWWLhwIWxsbNCtWzfI5TwNZpghqiaa2OCfiIiIqk55qosRwwxRtdHUBv9E
+RERUOVhdjBhmqFZgg38iIqLajdXFiGGGai02+CciIqpdWF2MGGaoTjhx4gT27dvHBv9EREQ1FKuL
+EcMM1Um5ubn48ccfsXXrVjb4JyIiqgFYXYwYZojwssF/eno63n77bTb4JyIi0lCsLkYMM0SvyGvw
+r6WlhUmTJrFAiIiINACrixHDDFEJeHh44NmzZ2jQoAEvPxMREVUDVhcjhhmiMli3bh0CAgLw66+/
+YsiQISwQIiKiKlCS6mLW1tawtLRkdTFimCEqyIULF/DZZ59hy5YtbPBPRERUSVhdjBhmiCrY/fv3
+MXbsWEybNo0N/omIiCoIq4sRw0wVCAoKgomJCbp06cJvpw7Ka/BvZmaGdevWsUCIiIjKiNXFiGGm
+iimVSsydOxc2NjbYs2cPv506KK/B/5UrV6Crq8sCISIiKgFWFyOGGQ1w8uRJxMTEIDY2FqtXr8br
+r7/Ob6gOyd/gv2XLliwQIiKiAigUCty4cUPlqgurixHDjAbYsGEDACAnJwe+vr5Yvnx5lb7/qVOn
+4OTkxLWiGrDBPxERUcFYXYyoBoSZO3fuICgoCNra2lAoFNiyZQu+/PJL1KtXr0re/8CBA9i7dy/D
+TDVgg38iIqKXWF2MqIaGGV9fX1hZWeHNN9/E7t27ER8fj71792LatGlVEqSmT58OBwcHrhFVjA3+
+iYiormJ1Mc329OlThISEYPTo0UWOFxMTg3/++Yc/iNflMJOamoqdO3di/fr1UpgBgP/+97+YOnUq
+ZDJZieclhFAbX6lUQktLq8Dxnz17BmdnZyQlJZVqmYUQEEIUOt/yLFNFTfvqfACUqiyrAhv8ExFR
+XcHqYjXLzZs3MW7cOMTFxaFp06aFjrdnzx4cPXqUYaaaaGnCQvj7+0Mul2Ps2LGwtLSEtbU1ACA6
+Ohpnz54tdvrc3FycP38eHh4eMDc3BwAkJiZi7ty5MDQ0hFwuh4WFBU6fPq0y3eXLl2Fra4s7d+4A
+AEJDQ+Hi4gIXFxfMnz9f7X2ys7Ph6+sLa2tr6OvrQ0dHB127doWPjw+ysrIqZJnKO21+V69excSJ
+E2Fvb4/Bgwejbdu26N27N3bs2CGFm+qU1+D/wIEDbPBPRES1SmpqKi5cuAAfHx+4ubmhdevWaN26
+NSZOnIjQ0FD06dMHO3bsQGxsLJ48eYJffvkFX3zxBQYMGMAgoyFsbGygq6uLkJCQIse7cOECHB0d
+WWDVRfwfb29v4ezsLKqaUqkUXbt2FV5eXtJr/v7+AoAAUOwynTp1Sjg5OUnjt2jRQkRHR4uOHTsK
+R0dH4eLiIurXry8ACB0dHfHHH39I0/7111/i9OnTwtjYWAAQtra24vTp0+L06dMiPDxc5X2ePn0q
++vTpI6ZPny4iIyPFo0ePxKFDh0SLFi0EANG3b1+RlpZW7mUqz7T5bdq0SchkMuHp6SkUCoUQQoi0
+tDRhZ2cnAIgVK1ZU6fccGRkpAIjY2FghhBDnz58XcrlcbN++vUTTGxgYiL179woiIiJNk5ubKyIj
+I4Wfn5+YNm2aMDc3F9ra2kJLS0t06dJFfPDBB2Lz5s0iIiJC5OTksMBqkH79+olPPvlEer53717R
+tm1b6Xl6errQ09MTR44cYWFVscDAQGFgYCCqPcycPXtWyGQycffuXem1zMxMKWAAEDdv3ix2PkOH
+DhUAhL6+vrC0tBQRERHSsD/++ENoa2sLAGLKlClq05qYmAgAYsSIEQXOOzs7W/Tp00eMGjVKKJVK
+lWH79++XltPb27vClqk80z548EAafurUKZVhAQEBAoBo1KiRyMrKqpYwExsbK4yMjIS7u3uJp2eY
+ISIiTfHw4UPxv//9T8yfP1/0799fNGzYUAAQLVu2FCNGjBArVqwQZ86cEUlJSSysGm7x4sWiZ8+e
+hYaZ8+fPC21tbZGQkMDCqqYwU+3VzDZu3AgXFxe0a9dOek1PTw8zZ86Unq9fv77Y+ZiamgIAMjMz
+ERgYCAsLC2lY9+7d0bdvX6kqWWnt3LkTV69exZw5c9TanAwfPhz6+voAgK1btyI3N7dClqk8096+
+fRsKhQIAEBcXpzLM2NgYAJCSkoK7d+9W+fedkZHBBv9ERMTqYlQjODo64o8//kBCQkKBw8+fP4/u
+3bujSZMmLKxqUq0dAMTGxuLw4cM4fvy42rCZM2di5cqVUCgU2LVrF5YvX15k4yttbW21E/b8WrVq
+BQCIj48v9XL6+fkBAMLDwxEdHa02vFmzZnj8+DESEhJw48YNdO/evdzLVJ5p+/Xrh08//RRZWVkY
+OXKkyrD8Yay0nR5UhC+//JIN/omISCOxdzF6lY2NDXR0dBASEgJXV1e14WwvU8fDzJYtW/DGG29g
+0KBBBZ6su7m54cCBA0hPT8f27dvx+eefl/m98nr/EqVs+J6cnIxr165BW1sbT548KXCcMWPGqL1P
+ZS5TcdPK5XJ8++23Kq+lp6cjICAAO3bskF5TKpVV/p0fOXIEFy9eZIN/IiKqduxdjIqjr68Pa2tr
+XLhwQS3MZGRk4PLly/jss89YUHUxzGRkZMDPzw8KhUK6kvGq/FcdNmzYgHnz5lX5ryB3796FEAJK
+pRJr1qxRuWJSE9y7dw/r16/HrVu3MHXqVCxZsqRauw5csWIFbGxsuOUREVGV4s0oqawcHBxw9OhR
+tdcvX76M3Nxc2Nvbs5DqYpgJCAhAamoqfHx8iryasWLFCjx9+hQPHjzAoUOHVK6CVIW0tDQAL6+A
+3L9/H+3bt68RX2xaWhoWLFgAf39/+Pr6Ys2aNZDJZLhw4UK1Ltft27dx//59HiiIiKjSsLoYVSRH
+R0csX74ciYmJKq+zvUwdDjNCCGzYsAFjxozB3Llzixw3Pj4eX331FYCXN9Gs6jBTv3596XFISEiN
+CDNJSUlwdHREREQEgoKCMGTIEI1Ztl69esHExASTJk2Cn58f280QEVG5sboYVaa8djPBwcEqr7O9
+jGaolt7MLl68iIiICEyfPr3YcWfOnAkdHR0AwKVLlxAeHl6ly2pqaio1mvfz8yuyfUtqaqpKL2zV
+ZeXKlYiIiICJiYlGBRkAcHZ2BgD88MMPePPNN3HixAluhUREVGLsXYyqWv52M3ny2ss4ODiwgOpi
+mFm9ejXMzMxKVMewZcuWGD16tPR87dq1ZXrPokJIXljJzs5WG9aoUSNYW1sDAIKDg7Fnz54C55Gb
+m4spU6aUqj1KWRr+l2TavN7h9PT01Ibl5ORU+0oXFRUF4GV7JGdnZ4wcORL//PMPt0YiIlKhUCgQ
+FRWF7du3Y/r06VKVngEDBmD37t1o0qQJFi5ciIiICCQlJeHixYv49ttvMWbMGFZnpgrl4OCA8+fP
+S8/DwsLYXqauhpkrV64gKCgIY8aMUbtnS2Hee+896fGBAwfw999/F7jDK0reSXxBISCvy+fbt29L
+w7Ozs/H48WMAgKenpzTutGnTsH79emRlZUmv3blzBy4uLsjOzoabm1uFLFN5ps3rpezOnTv4888/
+pdczMzOxe/dulV8VyhuqyqJbt2745JNPYGBgAF1dXcTExKBbt2746quvpGUiIiLNdP36ddy5c6dS
+5v3o0SMcPHgQXl5ecHBwQJMmTdC9e3csWrQIL168wPjx43Hy5EkkJCQgOjoaO3bsgLu7OywsLNju
+hSpV3v1m0tPTAbysYtajRw+2l6lrYSYzMxOzZs0CgFLtdPLfUFOhUGDevHlq3QrnDzjPnz9XGSaE
+kE7qk5KSkJycrDLc1tZWmsf8+fNx8OBBvPPOO/j3338BAOPGjcO4ceOkEOHp6YnmzZujR48eMDU1
+hZmZGZKSkuDv768S0MqzTOWZNu/qkBACgwYNwsKFCzF79mz06NEDXbt2lcZbtWoVlixZgh9++KHK
+V7wlS5ZAX18fPXr0wN27dzFr1ixs3rwZXbp0waFDh7hlEhFpmN9//x0jR45Er169EBAQUO75sboY
+1SR57WZu3rwphRlWMdMQ4v94e3sLZ2dnUVn2798vOnfuLAAIAEIul4tRo0aJ48ePFzrNX3/9JSZP
+nizatWsnTZf317t3b/HLL7+I0NBQMX78eJVhXbp0EV9++aUQQoiTJ08KJycnleE9e/YU27Ztk94n
+NjZWtG7dWhr++uuvi/Pnz6ssS05OjliyZIlo1KiRyrwMDAzEwoULRUZGhjRueZapIj5PUlKScHBw
+UBnH2dlZxMTECIVCIczNzaXXR40aJdLT00Vli4yMFABEbGys9NquXbuEvr6+mDx5sqhfv744dOiQ
+mDt3rpDL5WLIkCHi1q1b0rgGBgZi7969goiIqtaVK1eEq6urkMlkwsnJSYSEhJR6Hrm5uSIyMlL4
++fmJadOmCXNzc6GtrS20tLREly5dxAcffCA2b94sIiIiRE5ODgudNFK/fv3EsGHDRJs2bYSenp44
+cuQIC6UaBQYGCgMDAyET/1fHaMGCBYiKikJgYGCdDHVpaWkICwuDnp4eLC0tC2xvArysmnX9+nUk
+JCTAyMgI3bt3L3Tcag6piIyMxJMnT/Dmm2/CxMREGpaSkoLQ0FA0b94cPXv2LHF1v/KIiopC9+7d
+ERsbK9VjFkLA3t4eTZo0QYcOHeDn54fDhw+jRYsWmDNnDkJDQ/HJJ5/gyy+/ROvWreHr66tS5ZCI
+iCpPeHg4vv76axw7dgxDhgzB4sWLpZoMxSmudzErKyv2LkY1zpIlS+Dv74/U1FTEx8cjLi6O1cyq
+0bFjx/D++++DFUz/T4MGDTBgwIBix6tXr16Jd+bVSSaToUePHujRo4fasEaNGlXrjTPzL+PGjRvR
+p08f/PLLLwCAESNG4PDhwzh//jwCAgLw6aefwt/fXyM6LiAiqgvCwsLw9ddfIygoCMOGDUNYWJjU
+EU5BeDNKqivy7jfToEEDtpfRIAwzVK0sLCwwY8YMzJs3D5GRkSqB5t1334Wrqyu+/vprfPPNN1i+
+fLlaux8iIqoYv/32G77++mucPn0azs7OCA8Ph6Wlpco4vBkl1WXW1taQy+VISUlhexmGGaL/b9my
+Zfj555/x7bffSl1v5wWagQMHwsfHB1u2bIFcLoeFhQXmzJmDxYsX8xcRIqIKEBwcjKVLl+LcuXNw
+dXXFlStX0Lt3bwBFVxezsrLizSipTqlXrx7Mzc1x7do1hhmGGaL/z9DQECtXroSnpycmT55cYKDR
+0tKCt7c39PX1MW/ePAQEBGD9+vUq9yAiIqKS+/XXX7F06VJcuHABI0eOREhICLKzs3H27FmsWLGC
+1cWICtC8eXMA4P1lGGaIVH344YfYunUrPv30Uxw4cEAt0ORxc3PD0KFDsXLlSrXuuYmIqHjnz5/H
+0qVLERwcjF69emHUqFG4c+cO+vXrx+piRMXw9vbGixcvWDuEYYZIlZaWFjZs2IC+ffvi1KlTcHJy
+Ugk0+Xtcq1evHpYtW8ZCIyIqhb1792LChAkAAG1tbSiVSsTGxsLIyAgjR47E2rVrWV2MqBjW1tYY
+PHgwC4JhhkidjY0NPvzwQ3h6eiIyMhI6OjpSoFm/fr10o9Ca4s8//8TEiRPRrFkzaGlp8QumCvf8
++XMsX74crq6udeYzv/POO3j48CFPuEshOTkZMTEx0o2ggZcN+QHgxYsXCAoKQlBQEJYtWwaZTCZd
+hcn7r6Ojo/JcLpdDJpNBW1sbLVq0gKGhYa0pq3///RdvvfUWNmzYUGfWj++//x7r16+HsbExN5YS
+ysrKwqBBg1gQJZCdnY309HQcO3as0tYxhhnSKCtXroSZmRnWrVuHzz77DDKZDGvXrsWWLVuwZs0a
+vP322xg4cGCN+CyJiYm4fv063N3dYWBgwC+XKtzq1avx8OHDOvWZDx48iMaNG8PDw4MrQCk4OjpK
+ISYnJ0f6r1QqkZ2drfZfCIGsrCzpf94JHABkZmZK/9u3b4+OHTvWqm0qOzu7Tq0bMTExiIyMhJeX
+FzcUqnBRUVG4ePGitN9gmKFaz8jICEuXLsWXX36Jd999F61atYJMJoO+vj5sbW1VOgWoKVatWsUw
+Q5Xi+PHjde4zt23bFt7e3gwzVClkMhlCQkLq3Od2dnbGqlWruAJQpYSZyj5Wse4LaZzZs2ejQ4cO
+mD9/vsrrEyZMwPTp0zFixAicOXOGBUVERERUxzHMkMbR1tbG+vXrERAQgODgYOn1vCpnDDRERERE
+BLCaGWkoe3t7zJw5E8+ePVN5PS/QAKiRVc6IiIiIiGGG6gBfX98CX2egISIiIiKGGaqxGGiIiIiI
+iGGGGGiIiIiIiGGGiIGGiIiIiBhmiBhoiIiIiIhhhhhoiIiIiIhhhoiBhoiIiIgYZogYaIiIiIiI
+YYaIgYaIiIiIYYaIgYaIiIiIGGaIGGiIiIiIiGGGiIGGiIiIiBhmiIGGiIiIiBhmiBhoiIiIiIhh
+hoiBhoiIiIgYZogYaIiIiIgYZogYaIiIiIiIYYaIgYaIiIiIGGaIGGiIiIiIGGaIGGiIiIiIiGGG
+iIGGiIiIiBhmiBhoiIiIiIhhhoiBhoiIiIhhhoiBhoiIiIiqNcxcuHABZ86cYalQhYuKimKgISIi
+IqLKCzNpaWkYNGgQS4XqPAYaIiIiohoUZv7zn//gP//5D0uEiIGGiIiIqGaFGSJioCmMEALh4eE4
+ceIEnj17BmNjY1haWuLtt99GvXr1kJiYiJ9//hnTpk2Tpnnw4AGSkpLK/J6GhoZ47bXXih0vKysL
+ISEhuHr1Kh49egSFQgFDQ0N06NABNjY26NixI2QyGZ48eYJTp05h8uTJXLGpWgUFBcHExARdunTR
+mGV69uwZAgMDce7cOezdu1dl2L179+Dh4QEDAwNs3boVBgYG/BKpytbLFy9eFDq8adOmaNWqVYHH
+rOjo6AKnad++PRo0aFBh63ZR2w4xzBAx0GiAFy9eYNKkSThx4gSaN28OW1tb3L9/H76+vsjKyoKL
+iwsePnwIuVyuEmb+/PNPBAYG4qeffkJCQoLKPLW0tCCTyaTnSqUSQgiVcT7++GOp3Avy77//wsfH
+B9u2bUNCQgKaNGkCS0tLGBsb48GDB9i+fTuePHkCU1NT2NnZISwsDD179mSYoWqlVCoxd+5c2NjY
+YM+ePdW+PFu3bsX27dtx7do1CCFgaGioNs6aNWtw4sQJAICtrS08PT35RVKV+Oeff+Dn54ddu3ap
+HCM6deqE8ePHo1+/foWGmaCgIPz22284fPgwAMDAwACzZs3CRx99JIWZ8qzbJdl2qIoIohrAwMBA
+7N27t1qXQalUCk9PT1G/fn1x+vTpYscPDg4WAERiYmKNLfeMjAxhYWEhAIjJkyeLjIwMaVh2drbY
+vHmzqFevngAgOnfuXOA8QkJCBADpLyQkpMDxsrKyxO3bt8WSJUsEADFr1qxCl+vEiRPC2NhYABAt
+W7YUe/bsEdnZ2SrjKBQKcfToUfHGG29I7+3q6lqrtgtzc3Ph6+tbp/YFbdu2rdGf+fjx4wKA0NHR
+EY8ePar25VEqlSIpKUl07dpVABCGhoZq42zbtk0AEDKZTJw9e7ZWr1/e3t7Czs6uTm1T3t7ewtnZ
+WaOX0cfHR+U48tNPP5V42i5duggA4sSJExW6bpdk2yEhIiMjBQARGxtb4fMODAwUBgYGQotxjqh0
+V2imT5+OESNG1Ime/7Zt24br16+jSZMm2Lx5M/T19aVhOjo6cHd3x5kzZ1CvXj08evSowHlYWVmp
+PC/oVzQA0NXVRceOHfHVV19h8uTJyMnJKXC8H3/8EcOGDcPz58/RtWtXREREYMKECdDR0VG7+uPi
+4oJr167BxsYGAJCens4VmarVhg0bAAA5OTnw9fXViP1a48aN0b1790LHmT59Oi5fvoyoqCi8/fbb
+/BKpys2bNw9vvvmm9DwkJKSkP9gjLi4OdnZ2GDx4cIWu2yXZdqhqMMwQMdAU6siRIwAAU1NT1KtX
+r8Bx3nrrLXzzzTdISUlBSkqK2nAdHR1oaZVuVzNu3DhkZ2ervX716lVMmTIFSqUSDRs2xNGjR9Gy
+Zcsi59WkSRMcOXIERkZGSEtL40pM1ebOnTsICgqCtrY2AGDLli3IyMjQjJOBYrZRKysrdO3alV8i
+VQu5XI7FixdLz/39/Uu0Pw8PD8fz58/x0UcfVdq6XdrjGzHMEDHQVKHHjx9LJ2FFXdWYPn06WrRo
+IY1fUJmVhqOjI5YuXarymlKpxIwZM6QrNvPnz0f79u1LND8jIyN4eXnxygxVK19fX1hZWWHChAkA
+gPj4eDYYJiqh0aNHw8TEBACQlJSEHTt2FDvN999/j+bNm2PkyJEsQIYZIqqLgaZJkyYAgOTkZCxY
+sKDQ8XR1dTFp0iT8+++/5X7PFy9eQF9fXzpo5Tlx4gQiIiIAANra2nB3dy/VfCdNmoSsrCyuvFQt
+UlNTsXPnTsyePRuzZ8+WXv/vf/+r1vlFVRBCQKlUlmm6kirL/IkKI5fL8fHHH0vP165dC4VCUej4
+KSkp+PHHHzF58mTo6elV2Lpd1m2nPNNyW2KYIWKgKaP8N9Fdv349Pv744wKrfwGAj48PbG1ty/V+
+SqWy0J7ifvzxR+mxra0tjIyMSjVvIyMj7Ny5kysuVQt/f3/I5XKMHTsWlpaWsLa2BgBER0fj7Nmz
+RU67f/9+jB8/Hi4uLnBxcVGpbpOUlIS5c+di+PDh0vBXr2rmd+zYMQwcOBCvvfYaOnTogJ49e+LA
+gQNFvn9KSgp++OEHDB48GOvWrSvyRC0wMBDDhw+Hqakp2rdvj8aNG6N///7w8/MrtB0cUUlNnTpV
+6j757t27Uk9lhR0z0tLSMH369HKv22XddgAgOzsbvr6+sLa2hr6+PnR0dNC1a1f4+PgU+gMbt6XS
+p0Qi9mZWCb2c1YbezOLi4sRrr72m0ouMhYWFCA8PL9V8tLW1penv3r1b6HghISHCxMSkwGGtWrWS
+5uHp6cmNgr2Z1RhKpVJ07dpVeHl5Sa/5+/tL63NJepK6d++ekMvlAoAYPHiw2vDo6GhpOytofgqF
+QsyePVvI5XKxZcsWqfe/6OhoYWFhIRo1aqTWI1N0dLQYO3as0NfXl5b1m2++KXD50tPTxejRo4We
+np7YvXu3yMnJEUIIcfv2bdG3b18BQPTo0aNSejRib2a1vzez/D7//HNpfezbt2+h21zPnj1Fv379
+ChxemnW7LNtOnqdPn4o+ffqI6dOni8jISPHo0SNx6NAh0aJFC2n509LSauW2VJW9mTHMEMNMJQWa
+2hBmhBDi999/F82bN1cJNADExIkTxcOHD0sdZg4ePChCQ0NV/n799VexZcsW0a5duwLDTHJyssp7
+r1mzhhsFw0yNcfbsWSGTyVSCfGZmptS9OABx8+bNYudjampaaJgRQggTE5NCw8yiRYsK3XYeP34s
+GjRooHZClpqaKjIzM8Xu3buLPOFTKpVi7NixAkCB301KSoro3LmzACA6deokUlJSGGYYZsrswYMH
+UrAHIMLCwtTGuXLligAg/P39C5xHSdftsm47Qry8fUGfPn3EqFGjhFKpVBm2f/9+6X29vb1r5bZU
+lWGG1cyIWOWsSD179sS1a9fUuq3cs2cPOnfujG3btpWqHr2bmxtsbW1V/vr37w93d3fcu3evwGni
+4uJUnjds2JArHdUYGzduhIuLC9q1aye9pqenh5kzZ6pU4yyOXC4v0/C//voLK1euhKGhYYG9Or32
+2msYMGCA2usNGjSAnp4e7O3ti3zfoKAg7N+/H02bNsXUqVPVhjds2BA+Pj4AgFu3buE///kPVwoq
+s9atW2PcuHHS8++++05tnK1bt6Jp06Z45513CpxHSdftsm47ALBz505cvXoVc+bMUesEZ/jw4dKt
+DrZu3Yrc3FxuS+XAMENUSYHm6tWrteaztW3bFmfOnMG+ffvwxhtvSK+npqZi5syZRd4X5lU3b95E
+RkaG9Jeeno6kpCRcvXoVffv2LdE8imr0SaRJYmNjcfjwYZVG/3lmzpwpddO8a9cuJCQkVMoyrFu3
+DgqFAgMHDoSurm6B4zRq1KjQ6V+9h9Or8u6XY2VlVej8hw0bBmNjY7WTN6Ky+OSTT6THP//8M2Jj
+Y6XnycnJ+OmnnzBx4kSVe6OVZd0uz7bj5+cH4GX30Bs3blT58/PzQ7NmzQAACQkJuHHjBrclhhki
+zQs0RfX+VVM/29ixY3Hjxg0sXbpU5VfgPXv2YPLkySW6QqOnpwd9fX3pr169emjcuDF69+6NzZs3
+FzhN06ZNVZ6/eqWGSFNt2bIFb7zxhkpnGnlatWoFNzc3AC9v6Lp9+/YKf38hhNRIunPnzhU+f6VS
+iQsXLgAAmjdvXuh42tra6N+/P4CXXVJHR0dz5aAy69WrFxwcHKR1MP+VzZI0/K/sbSc5ORnXrl2D
+trY2njx5gpiYGLW/MWPGwNPTE56entDS0uK2VA5ybhJElRNoHj9+XKKeTmoaPT09LF68GEOGDMGI
+ESPw9OlTAMBPP/2EUaNGYcyYMWWed7du3dCqVSu115s0aQJjY2M8f/4cABATE8MVjTReRkYG/Pz8
+oFAoCr1LeHx8vPR4w4YNmDdvXrHVyUrjxYsX0jZa1NWXsoqPj5duXljcL8SdOnWSHj98+BA9evTg
+SkJl9umnn0on/35+fliyZAkaNWqErVu3wtbWFt26dau2befu3btSN8xr1qyRrsAW937clhhmiDQq
+0MyZM6dGh5nU1FQ0aNCg0BteWllZITg4GLa2ttKVEl9f33KFGZlMht9++63AYXZ2djh48CAAIDQ0
+lCsZDE9QJwAAGAdJREFUabyAgACkpqbCx8enyLuEr1ixAk+fPsWDBw9w6NChcm1Dr8p/FTMzM7PC
+P2P+Kp95J36FMTQ0lB6X5OSOqCjDhg1Dp06dcOvWLaSkpGD79u2wt7fH9evXK6Qb/vJsO3mhRAiB
++/fvl+gGz9yWGGaINDLQ1GTu7u6YNWsW3nrrrULH6dChA3x8fPDhhx8CAP74448KXYaHDx/CyMgI
+enp6GDt2rBRm7ty5g6ioKJibm3NFI40khMCGDRswZswYzJ07t8hx4+Pj8dVXXwF4eRPNigwz+W8W
++Pfff1f452zevDl0dHSQk5OD6OhoCCEK3fflv/Ff/rZ3RGWhpaWFTz75ROpIY926dYiMjETjxo0r
+ZBsqz7ZTv3596XFISEiJwgy3pXKsC9wciKiwoLJ8+fJix8t/o8yS3GW5pJKSkmBpaSldbndzc1M5
+IBTUgw2Rprh48SIiIiJKVG9/5syZUkPkS5cuITw8vMwB6lWtW7eW5n3hwoVS9TxYEnK5XLoBaFxc
+nNSQuSBPnjwB8LKtUMeOHbmSULlNnDhRal9y//597N69GxMmTECDBg3KPe/ybDumpqZSEPHz8yty
+2ryOdLgtMcwQUSWEmaCgoCLvsAy8bBeQx8bGpsQnWcVZtGgROnfuLB2UdHR0sGnTJmn4rl27cPr0
+6RLPLzExEa6urnj27Bm/XKp0q1evhpmZWbFdvwJAy5YtMXr0aOn52rVrCxwvrzpJenp6gdtYSkqK
+2ut6enpSY+G7d+8iKCioyG20oG21uO33gw8+kB4HBAQUOl5eSHN3d6/xV65JM9SrVw+zZs1Sea00
+Df+LWrfLs+00atRICibBwcHYs2dPgdPm5uZiypQpcHJy4rbEMENElRFm8nauRf1ClL9dUP7uMvNk
+ZmaqXBIv7sQor3rOhg0b1HqAGjp0KNasWSM9d3NzQ2BgYLGfJTQ0FJaWlujXrx9atGjBL5cq1ZUr
+VxAUFIQxY8aU+ETjvffeU9mmCqrWkndl8vLly7h9+7b0ukKhwIoVK6SQk79TAQCYN2+e9NjDwwMP
+Hz5UC/ohISEAXvbClJqaqjI8f7frBTVMnjRpEiwtLQEAmzdvRmJioto4t2/fRnBwMMzMzFSWh6i8
+Zs2aJdUK6NOnDywsLEo8bXHrdnm2HU9PT+nxtGnTsH79emRlZUmv3blzBy4uLsjOzpZ6NeS2xDBD
+RJUQZhISEmBnZ4effvpJpYGiUqnEjh07pBt4LV++vMBfoV8NGzt27EBYWBhiYmJw79493L17Fzdv
+3sTFixexadMm2NvbS20MBg4cqDa/Tz75BPv27UOzZs2QmpoKV1dXuLm54eTJkyq/WKempiIoKAjv
+vPMOXFxcsGzZMnz++ef8YqlSZWZmSr8Ul6ZXsvw31FQoFJg3b57KjwB5PywAQHZ2Nuzs7ODl5QVv
+b2+Ym5tDCCF1VRsWFob3338fx44dA/CyobSHhweAl1VxevXqhRUrViAwMBDbtm2Do6MjDAwMpBO6
+7t27q9zQM/+PGbdu3VJbdrlcjkOHDqFTp06Ij4/HhAkTpAbQefuQiRMnok2bNggMDKyQKkBEeVq0
+aIGJEycCAGbMmFGqaYtbt8uz7YwbN066uWdOTg48PT3RvHlz9OjRA6ampjAzM0NSUhL8/f2lHz24
+LZWRIKoBDAwMxN69e2vUMgcHBwsAIjExsUaWuVKpFAYGBmLJkiXCy8tLmJmZiRYtWoghQ4YIV1dX
+0bZtWwFAmJqaip9//lltej8/PzFgwAChra0tAJT6z8DAQOTm5ha6fHFxcWLJkiXScgAQMplMGBoa
+imbNmgkAok2bNmLRokUiLi6uVm4X5ubmwtfXt07tC9q2bauxn3n//v2ic+fO0vool8vFqFGjxPHj
+xwud5q+//hKTJ08W7dq1U9sGevfuLX755ReVbXLp0qVCLpdL4zRr1kxs27ZNCCGEs7OzaN++vfD2
+9hahoaEq249CoRDffPONaNq0qcp7mJiYiHPnzon33/9/7d1/dNV1/cDxF9vdxgZzTn4VET/q2DIC
+A9EgEaxOBxI9kOmRUA6dOqEQET+UMDrQOXKC6mQHS4qAlHM8mgdPHTMMzBN4GHFU1CUJyVkonFJ+
+jDMYsrGN7dMfftnXxa8pG9y7PR5/7W73fnbv+3Mv7LnPfX12e9KtW7dk2rRpyebNm5OGhoZk06ZN
+yYwZM5Lu3bs3e41NnDgxeeyxx055LEeOHElmz56dFBYWJr17906mTp2afOMb30j69euX3HXXXRnx
+Opw/f34ycuTIDvWamj9/fjJu3LiMfgw7duxICgsLk6qqqhZd//08tz/Ia+ek+vr6ZNGiRUlhYeEp
+/7/94Ac/SGpqak57/9rDa+mkV199NYmIZM+ePa2+7T/96U9JUVFR0ilp7WlAaAOXXnppLF++vNlb
+MdJdaWlpXHfddXH48OGm39xkmqeffjpuuOGGk7/4iF27dkVZWVkcOnQo8vPzY9CgQTF06NCznnb2
+AvxCJnbt2hX/+Mc/oqKiIhobG6Nnz54xcODAKCkpadfvJx48eHBMmzat6TeHHUG/fv1i/vz5Heox
+/6+DBw9GWVlZ5Ofnx7Bhw5r+yvnu3bujf//+Z3091tbWRllZWVRUVETPnj1jyJAhkUqlory8PPr1
+63fOv4jeErW1tfH3v/89Kioqori4OK688spmZ3dKZ/fee2+UlpbG5s2bO8zz6d57743t27e36C27
+6ezll1+OoUOHttn2z+e1U1NTE2VlZVFZWRk9evSIwYMHt+iEOZn8Wjpp+/btMXjw4NizZ0/07du3
+Vbe9bt26uP32252aGTizkyET8e6ppktKSpr9sa50kK73C9pKjx49Tpkni2jZKVrz8vKaBpPf6+Tb
+SltDXl5eXHPNNXYUF1Rbhsz5vnby8/ObnfnTa6l1mZkBAADEDAAAgJgBAAAQMwAAgJgBAAAQMwAA
+AGIGAAAQMwAAAGIGAABAzAAAAIgZAABAzAAAAIgZAAAAMQMAAIgZAAAAMQMAACBmAAAAMQMAACBm
+AAAAxAwAAICYAQAAxAwAAICYAQAAEDMAAICYAQAAEDMAAABiBgAAEDMAAABiBgAAQMwAAACIGQAA
+QMwAAACIGQAAADEDAACIGQAAgDSTsgTQttauXRtFRUUWgla3ffv2DveYKyoqYu3atdG9e/cO85gb
+Ghri+PHj0aVLF096/163iXXr1sXatWs9AVqguro68vPzo1OnThYjTf6fEjPQVi+u1Lsvr9mzZ0dO
+To4FoU3k5eV1qMdbVFQUGzdujLKysg7zmOvq6qK6ujry8vKic+fOfohqQ5WVlTF69OgO9Zjz8/Mj
+IuLOO+/0BDiH2traqKmpiYKCgsjNzbUgLXDkyJGIiMjKars3g4kZaCPDhw+PJEksBLSit956q8M9
+5rq6uli1alUsXbo0qqqqYubMmTFr1qwoLi72hOC8LVy4MBYuXGghzmL9+vUxd+7c2Lt3b9x3330x
+Z86cpgjk4jMzAwBpLDc3N6ZPnx7l5eXxox/9KB566KEYMGBALFq0KCorKy0QtJHy8vIYP358jBs3
+LoYPHx67du2KBQsWCBkxAwCIGkhPhw8fjrvvvjsGDhwYVVVVsW3btli9enV8+MMftjhiBgAQNZB+
+Tpw4EcuXL4/LL7881q5dG2vWrImNGzfGkCFDLI6YAQBEDaSn9evXx5VXXhnf+973YtasWfHPf/4z
+Jk6caGHEDAAgaiA9mYsRMwCAqIGMYi5GzAAAogYyirkYMQMAiBrIOOZixAwAIGogo5iLETMAQDuN
+moULF4oa2iVzMWIGAGjnUfPwww+LGtoVczFiBgAQNZBxzMWIGQBA1IgaMkp5eXlMmDDBXIyYAQBE
+jaghM7x3LubIkSPmYsQMACBqRA3pzVwMYgYAEDVkHHMxiBkAQNSQUczFIGYAAFFDRjEXg5gBAFo9
+apYsWSJqaDPmYhAzAECbRc20adNEDW3CXAwt1SlJksQykPZP1E6dYvDgwTFp0iSLAZCGGhoa4sUX
+X4yNGzdGbW1tXHvttTFy5EjzDLwvhw4dinXr1sXOnTvjqquuijFjxkRhYaGF4RTr1q2LzZs3ixky
+wzXXXBNVVVXRtWtXiwGQxpIkiYqKiti3b180NDREz549o1evXpGdnW1xOGsMv/3223HgwIHo2rVr
+9OnTJwoKCiwMZ1RdXR1du3YVMwBA66urq4vVq1fHkiVLoqqqKmbOnBmzZ8+O4uJii0OTEydOxG9+
+85tYtGhRFBQUxI9//GNvJ+N9ETMAgKjhglu/fn3MnTs39u7dG/Pnz485c+Z4WyJiBgAQNaSv8vLy
+uPvuu+Opp56Kr3/967F48WKnWeYDczYzAKDNOfsZ/l4MbcGRGQDggnOkpuMwF4OYAQBEDRnHXAxi
+BgAQNWQUczFcKGZmAICLzkxN+2AuhgvNkRkAIO04UpNZzMUgZgAARE3GMReDmAEAEDUZxVwM6cDM
+DACQ9szUpA9zMaQTR2YAgIzjSM2FZy4GMQMAIGoyjrkYxAwAgKjJKOZiSHdmZgCAjGempnWZiyFT
+ODIDALQ7jtR8MP87F7N06dL42te+ZmEQMwAAoiZ9mYtBzAAAiJqMYi6GTGZmBgBo98zUnMpcDO2B
+IzMAQIfTHo/UvPnmm/Hmm2/G9ddff9brmYtBzAAAdPCoOXbsWDz77LMxfvz4i/44du3aFSUlJU2P
+KScn57TXMxdDe+NtZgBAh3U+bz/75S9/GRMmTIilS5de1Mewc+fOuPbaayM7OzuysrLigQceOOU6
+5eXlMWHChBg3blwMHz48du3aFQsWLBAyZDxHZgAA/k9Lj9QcO3YsPvrRj0ZlZWVkZ2fHlClTYsWK
+FZFKpS7o/S0rK4svfOELcfTo0Thx4kRERHTp0iXeeOON6NGjRxw+fDgWL14cv/jFL+Jzn/tc3H//
+/TFkyBA7GjEDANBRo+anP/1pLFiwIOrr6yMiIicnJ0aOHBl/+MMfoqio6ILcx5deeik+//nPR3V1
+dTQ0NDR9Pjc3NyZNmhRXX321uRjEDACAqPn/qLnzzjtj0KBBp7wNLTc3NwYMGBDPPPNM9O3bt03v
+15YtW2LMmDFx/PjxZiHzXgUFBfH973/fXAxiBgBA1LwbNQcPHoz6+vrTRkROTk5ccsklsWHDhrjq
+qqva5L5s2rQpvvzlL0ddXV00Njae9jpZWVkxZMiQ2LZtm52HmAEAIKKysjL69OkT1dXVZ7xOdnZ2
+pFKpePzxx1v9TGcbNmyI8ePHR319/RlD5r1B87vf/S5uvfVWO452y9nMAABaaNWqVU1zMmfS0NAQ
+dXV1cfPNN8eyZcta7Xs/9dRTceONN571iMx7JUkS3/3ud+P48eN2HGIGAKAjO3bsWCxZsuScMXMy
+JBobG2POnDnx7W9/+4xzLS31xBNPxM033xwnTpyIlr6pJkmSePvtty/6qaNBzAAAXGTLli2Lo0eP
+vq/bNDY2xsqVK+Omm26Kd9555wN930ceeSRuu+229xVEeXl50alTp4iIeO2118JUAe2VmRkAgHOo
+qamJgoKCiHj3rGV1dXXv6/a5ubnxiU98IjZs2BC9e/du8e1Wr14dU6dObdF8TCqVirq6uhgwYEBM
+mDAhxo4dG6NGjYrOnTvbgYgZAICObN++fbF169bYunVrPPfcc1FWVhZ1dXWRl5fXooH8nJycKC4u
+jmeffTYGDRp0zu/34IMPxne+850zHlXJy8uLurq6yM3NjS9+8Ytx0003xdixY6N///52FmIGAIAz
+q6+vj5dffjmef/75+Nvf/habNm2K/fv3RyqViuzs7KitrT3lNllZWZGXlxe///3vY+zYsWfc9s9+
+9rOYN29es0By9AXEDABAm/nPf/4TL7zwQmzZsiU2bdoUr776atTX10fnzp2jtra22VGWX/3qV3HX
+XXedso377rsvFi5cGBHvnua5sbHR0RcQMwAAF1ZdXV288sorsXXr1ti8eXOUlpbGgQMHmr7+pS99
+KdavXx9ZWe+ek2natGnx61//OiIi+vfvH1/5ylccfQExAwBcKPv27Ys//vGPFuIMDh8+HP/617/i
+6aefjoaGhujbt2/ccccdsX79+vj3v/8dH/rQh2L06NHRrVs3i3UWI0eOjE996lMWQsyIGQCg9ZSW
+lsZ1110XvXr1ii5duliQczj5N2mysrKaTqfM2e3evTuWL18e06ZNsxgdXMoSAABt4fXXX4+ioiIL
+QasbPHiwRSAi/NFMAABAzAAAAIgZAAAAMQMAAIgZAAAAMQMAACBmAAAAMQMAACBmAAAAxAwAAICY
+AQAAxAwAAICYAQAAEDMAAICYAQAAEDMAAABiBgAAEDMAAABiBgAAQMwAAACIGQAAQMwAAACIGQAA
+ADEDAACIGQAAADEDAAAgZgAAADEDAAAgZgAAAMQMAACAmAEAANqBlCUAADh/VVVVsXfv3vP7wSyV
+ik9+8pOxf//+OHjw4BmvV1xcHB/5yEdO+XySJPHaa6+d9jYDBgyILl262FGIGQAAmvvLX/4St9xy
+y3lto2fPnrF///7YvXt3rFy5Mh5++OFIkqTp6yUlJTFx4sQYNWrUGWPmz3/+c2zZsiWefPLJiIgo
+KiqK6dOnx4wZM8QMYgYAgFPV1NRERETv3r1jwYIF8dnPfjYuu+yySKVSUVpaGpMmTYqIiI997GPx
+3HPPRZIkcfz48XjrrbfiySefjGXLljVtY8SIETFixIi44oorYt68eU3f44c//GFMnDjxjPchKysr
+7rnnnrjnnnti4MCBsWPHjnj88cdjzJgxdhBiBgCA06uuro6cnJz461//GiUlJc2+1qNHj6aPc3Jy
+ok+fPk2XL7/88hg9enRceumlsXjx4ma3mz17djz00EOxc+fOiIgoLS09a8yclCRJVFRUxMiRI4UM
+7ZoTAAAAtIKampoYP378KSHTUjNmzIjGxsZoaGho+lwqlYqFCxc2XX7kkUfi2LFj59zWCy+8EAcO
+HIgZM2bYMYgZAADOHTPjxo37wLe/7LLLYtiwYXH8+PFmn7/llluiX79+ERFx5MiR+O1vf3vOba1e
+vTq6d+8eEyZMsGMQMwAAnN28efNiypQp57WNLVu2REFBQbPPpVKpmDVrVtPln//8582O3vyvo0eP
+xqOPPhpTpkyJvLw8OwYxAwDAOX6oysqKTp06ndc2srOzT7uNb37zm1FUVBQREW+88UbTmcpO59FH
+H41jx47Ft771LTsFMQMAwMVVWFgYU6dObbp8//33n/Z6SZLEihUrYtSoUR94dgfEDAAArWrmzJmR
+Sr17ItotW7bE888/f8p1XnrppXjllVeahQ+IGQAALqo+ffrEbbfd1nT5dEdnVqxYEcXFxfHVr37V
+giFmAABIH3PmzGn6+Iknnog9e/Y0Xa6qqorHHnssJk+eHJ07d7ZYiBkAANLH0KFD4/rrr4+IiMbG
+xnjggQeavmbwHzEDAEBamzt3btPHK1eujKqqqqbB/xEjRsSnP/1pi4SYAQAg/dxwww1NZyo7evRo
+rFq1KrZt2xZlZWUG/xEzAACk8Q9vWVnNZmeWLVsWDz74YFxyySVx6623WiDEDAAA6Wvy5MnRvXv3
+iIjYu3dvrFmzJu64447o0qWLxUHMAADQehobG1t1e/n5+TF9+vRmnzP4j5gBAKDVvfPOO00f19TU
+tMo2p0+fHnl5eRERMWzYsPjMZz5joREzAAC0rmeeeabp471798aOHTvOe5u9evWKyZMnR0QY/EfM
+AADQeg4dOhRTpkyJIUOGxIoVK5p97eqrr44bb7wxfvKTn5zX95gzZ04UFhbGxIkTLTgdUsoSAAC0
+vm7dusWaNWva9HtcccUVsWnTpigsLLTgdEiOzAAAZLChQ4daBMQMAACAmAEAABAzAAAAYgYAABAz
+AAAAYgYAAEDMAAAAYgYAAEDMAAAAiBkAAEDMAAAAiBkAAAAxAwAAIGYAAAAxAwAAIGYAAADEDAAA
+IGYAAADEDAAAgJgBAADEjCUAAADEDAAAgJgBAAAQMwAAgJgBAAAQMwAAAGIGAAAQMwAAAGIGAABA
+zAAAAIgZAABAzAAAAIgZAAAAMQMAAIgZAACA9JCyBABAW+jVq1cUFBRYCFpdZWWlRSAiIjolSZJY
+BgCgtVRUVMTGjRstBG1q6NCh8fGPf9xCiBkxAwAAZB4zMwAAQEZKvb79xaYLJYOutiIAAEBGcGQG
+AADISP8FpxZnWS0U37cAAAAASUVORK5CYII=

linux-imx/Documentation/DocBook/media/fieldseq_bt.gif.b64

diff --git a/linux-imx/Documentation/DocBook/media/fieldseq_bt.gif.b64 b/linux-imx/Documentation/DocBook/media/fieldseq_bt.gif.b64
new file mode 100644
index 0000000..b5b557b
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/fieldseq_bt.gif.b64
@@ -0,0 +1,447 @@
+R0lGODlhcwKfAucAAAAAAElJDK+vr0gSElYMDC8kDV5bEBcHOwYGSEQODmEaGgoKOBkTVC0tVyAg
+aDcJC6Ojoys8DAAYGqSkxV9fFFtdEJmZmUA4EF0wMAAAcAoTHTZHJ0gYGAcMTwcSO29ISFUHB2AV
+FXd3YAcHMRUVQiIAGg4HT3t7eywOJ3d3dwcHSEEgABMuDnd3OGpkSQAAYlZGBzEEBGJlDCstCxwc
+WQcHSzkRGWBtYC0AACA3ABAKNhAQTTMwDA0VQD4AAEYVFVVVVSQMJQULOB8fQScnYBgYRD5VPmZm
+DEZRB2ZiDAoKSgAAVAwQOH5+lBwcS+7u7hoaST4+X3d3WACPADMzMyBRIDgAAGBgc0JCEHEAAEwN
+DRkwDAoKOR8kPZR7eyA1IABpABgNQBA9EABVAAsLRww/DAwMPgBNAENDCgc9B8zMzAUFQQBDAD4M
+DAwOKgAAcQA5AEtLFYqKAA0NTC8HBxEREQgfCAArAAApACIqMkkGBhoqKnwAAAsGQ6qqqkoKCg4O
+MlkcHAoZJCcrW6SkpFQAAAAAOBAOSwAVGh0ROgMPHWZmB00QEGUAAFQaGjEyC2w4OLe3n4qKioiI
+iBAVMC4uXhkZUGIAAHJYWHd3AAAAPhAQUQUGL0BAIGggIBgAGkIVFV9fEAwcJR8KJA8MU9EAAAcH
+VRoaYWhoaDcAALu7AGZmZnAAAGRkZGQVFVhqWD4KCgwOUzMzDAAAmgklBzEHBzExClhYWBMTPAYJ
+Qy8fCFpaB///////ACISRExUDUQrDAwMVhISSEYYGHd3IDhcOERERElJAAkPNTsHF1hYckgGBj05
+CFYAADg4OCAVO0hCDDAwMLu7ilpaDR8qCDg+EBxGHN3d3REGNjo9CDQ8DBwYRGZmHFMAABQ+FBE+
+ESIiIhs+BxU0FWVeBw04DYqKsxAsEB8hQAwuDAc2BwwqDAoqCgcIL1dMDQAA0Q0iDQwiDAckBxAQ
+EDwAAAAAU0JCDAkJPru7u5oAADg4bAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAALwALAAAAABzAp8C
+AAj+AHkJHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq3Mixo8ePIEOKHEmypMmTKFOqXMmypcuX
+MGPKnEmzps2bOHPq3Mkz5z0AQIMCSNHyZ0WjE5GqNAZAqcGmT+8VZMoL6k6rEp0KfEJl489VBcEB
+GGjBwk8LBJsyFQqU15MUdQDUWfVk4JNVccER5ZXCT8+/gAN/xFp0LEWtDxEfRKo44s8n1/YeJCyQ
+8GO+1xhSbvwxRWaklBEiXoVW4886BNW0FQjkyem6laUKdLqKSuZrQIxtpbLqc51JbsHBFkw8pYUT
+w4uHDK2SM0PnCqHPNiz9uWGFoS1fb7h5u0nQshf+ar2G2isAKn4FpqByHQivn8YkY3WK9RoANXx1
+kwUncBVw5QCSdAsA8jiDXIAeEQYXAMbgp0YKKQAFYVxEPbjgXm/FBURmD1pQxz1qsDfUdAVlCMCG
+vFg4lhpMgbOKYX6IBY5fHX642FBx0cULbnKlUFdQkgS1IxA91mWMBWJRYQF7dZQ2HVBIsdhjbG4R
+WUeE4f3UFlQN6hUiUK1puV1Q93Sp24LglNYlAGmmKGJrvBxJ4YWxiUkmLzGymZ6ULnqXAlgC5Tmj
+QRE2qd+NkwDKCziTwAjcT6rhV1WW28013D11UfHfVrItieCnHw0YVIEHgnoRVutllgJ/X+F54hP+
+fjT1FWR68WXbXV3dU4cxmBoDnGpSaZUqru/NJRUVrV3DXrHBAnCNrrwmN9Cs17jIC2+QUUEUY4Zh
+qyxR52X2IlFwFWSUUU/8tmObXBrzxBNEhveeYVCd5wd5RD1Ra3eVzajGPeCoSq8x4qJ2ZXDghvlq
+rFJBBR6z82aGbLbe+TqbjT9lNtCq4npHUMblqQEOUr3Nmx+VJJIVl7aSToqQan/ZydbMNNds8804
+56zzzjzXbGpFWA0q0IdKWSWrswIhyUuTAtn3L9IE2ddsQUzveF/GKUJtwVirSAZECliLpnUdqmns
+ockml500agCkx625YxnlqUCT6NaU2lbL+zD+AKXNpTHK09Lr5MaCk+h3WrIZ3fDULnc90Nd4b12Q
+VY6zJtmiTnoc+LV+QYiUfuiyS6lB96wHAKDMAa5TZBC27vrrsMcu++y012777bjDHg3N4Dgj7c8P
+YTXzPUUnTvx1Rgl/PFlUgBMv2gMp/zaJawUFtuabT6fUudTFjfxYVk2/uVERCmX38tHrTe/iTa8C
+Th1A4MevyykCsStV9Bt1jfvwy288lQ5bX5zYcr3spU8g1ZMQ4gbCH7HxIlGLetp7/sOYOjxhPthz
+FX40VRDPqA54IISIqAhkoN+F0CFBkxf0FBe2s1XNaVG6D5W08sKrGcY+ZuPa5aB3I7OBI3L+qHkb
+EPPXPbiZzAKHSh8Om6YdAKowQ/TLnlUOhrbwbQeKinNiFaVSuYEskReSI4iNeNFFg1StKgnRH9lY
+NZYUSEopX8NgWpIDlVURJFawSd0J92iQW5DKhHzkTnhS9UALFq9Op6MVuW5VG7RF6oFt46GtrkEs
+pRgjWcvSVbCIhrwdUqtW3tLWvOqClFCCSzbiIxG61PUtlxnDXfBqosusAgQ42TGSHwPAj2TDSqbs
+kkS1rMst/zdLxjkMYza6JMWmshdNQqx0fAkYGanjyW6J0iiHUkq65DiQV2aGWMFB0T1EmbVAmjMh
+lDwnRRS0MvwcclI/WZCOTAQnpSwoPgD+mIRW6EnK6zyBKYZKmozQYk/vqIiKPEKoWNRAHtQkdC9W
+TNn4DPMlKkIllldyYy61mKK1UAE/AI3aQq2CJDbBhW2oXJFH/YeyekmlodeSYUnb5BaAIrEgk3CP
+QNlUmgi55UVNMoxPNwpJd95HMk5p1Ojsghe5lGwrTa1V0nSqzqpadSXVmckOr7rHdAEyNbDRVU+A
+MDiumvWsHclqTO6xKbSeMAVlPcgqWgMvReWkWm7Nq14tota9+vUjb2FILF/FE7P89bCITaxiF8vY
+xjr2sZCNrGQnS9nKWvaymM2sZjfL2c569rOgDa1oR1uSfxHvtKhNrWpXy9rWuva1sI3+7WkBaVrZ
+2va2uM0tbNOo29769re7FQ1wh0vc3/K2uMhNbnAN4hrlOve5p21ZQvIxi+pa97rYza52t8vd7nr3
+u+CtbgZUOBBP4OO86E2vetfL3va6973wja98z1uIhHBDFfjNr373y9/++ve/AA6wgAeMX24kxBpg
+SLCCF8zgBjv4wRCOsIQnTOEEWyMhSwivhjfM4Q6DlwaiYcV8R0ziEptYvp5gSD7cweIWu/jFMI6x
+jGdM4xrb+MYsngV5BeKJUvj4x0AOspCHTOQiG/nISE6yjy+REGL04slQjrKUp0zlKlv5yljOspaf
+TIyEVGEKYA6zmMdM5jKb+cxoTrP+mtcM5iok5AU4jrOc50znGztANPhQsp73zOc+JznFC1lxnQdN
+6ELTWMcI6bGfF83oRhuZyQhx8pYnTelKWzrLXUbIl9nM6U57+tNqdjNC4GzoUpt60HdeTJ4dzepW
+LxrQChH0qWdN60PvmBeKdrWud/3oJl/618AONpYzfZBNg/rYyE72mUV9EFLX+tnQdkeqSbdqXlv7
+2qWAdULOYYZue/vb4A63uMdN7nKb+9zo7jYXIIAQDhDg3fCOt7znTe962/ve+M63vt9di4TI4ggA
+D7jAB07wghv84AhPuMIXDnBZJOQd6Ii4xCdO8Ypb/OIYz7jGN87xiL8jIexIt8j+R07ykqPbDQiB
+wB/2zfKWu/zl+uaAiqNNc1oj+iC5xrbOWw3pg0ha2EAP+qWJbRBjK/voSP80sw3i7Jo7ndDTNle1
+d051RmsbIbJ+utbnfHOD5LzqYN9zzw3yc6Gb/exWJnpBjJ70trvdzEsvSNO3TncbR/1jUw+73pF8
+9YNkve6Al3HXC/L1vRt+yGMvSNnRznjGq50gbH+75N8ed4LMPfCYb/Hdp5X3w3v+x303yN8zn/nB
+E6Twn/d84gmy+Ma7PuiPH0jkJ0/7o1d+IJcnfeA3P5vOp/7woS/IEOZA/OIb//jIT77yl8/85jv/
++cUnBEJ+oIXqW//62M++9rf+z/3ue//74K8+LBKChWmY//zoT7/618/+9rv//fCPv/mxkBBzkOP+
++M+//vfP//77//8AGIACeH/mkBD2AH0ImIAKuIDPxwQIQQjhF4ESOIEUGH4/MHO6p3umV16/14Gr
+NxCt93oi+GuxJxCzV3soCGq3JxC5l4F0x3vv4XsdqHfBRxCj54J0t4E8NoOp94ECEYIjGISTVoK8
+cIIpeIRstoK80II4+HQweA8yyINVV4MDcYNN+HQ6iGtSqHq+JoReWGlEaIRIOIbL9mZXuHt4toXA
+h4FnmIO3hnpquHM+yAtA+IV2OGVhSIZ6mIRm2IYvmIZxSIMMAQUvUIiGeIj+iJiIiriIjNiIjviI
+kFiIS8BuB5EA83CJmJiJmriJnNiJnviJoBiKoniJOJAQ2ZAJqJiKqriKrNiKrviKsBiLsjiLqJgN
+CREPbJCLuriLvNiLvviLwBiMwjiMxJiL8ZAQhhCJyriMzNiMkDgCKZcKoziN1FiN1iiKCcCGfoiF
+bxiIejeHdXiH4tgLebiH5liGo7aNW/eEUeiNvEaFAmGF6lhrWQiH7shr4DiO+oiHXnaO/khmSsiE
+8zhr7HiPU6iNAwlt9WiQVJeP+/iQ5NiP/ziRUxCQCVlzBcmQOgePvEAEHvaRIBmS3pUBAoAQrsAH
+KJmSKrmSLNmSLvmSMBn+kzI5kyjZDAkRCgSWkzq5kzw5YKGQEGJQYUI5lERZlBQmBhgmkkq5lCC5
+CQghAI1Ak1I5lVRZlTPpCgzRAG+wlVzZlV75lWAZlmI5lmRZlma5lfRQkgehACfWlm75lvBVXwgR
+B3JQl3Z5l3iZl3q5l3zZl375l4BZl3GQEOJwBoZ5mIiZmIq5mIzZmI75mJAZmYYpDgmhCWd5mZiZ
+mZppliTwlCIGl6AZmm2pAAh5kTbXjRqJbQ4JkfpYjhTpjxZpmtCWkalpbRwpj7JZaAtZm9a2mqwp
+jq75muYYm7lJa7TJm7p2m8VJj6iJnLrmm79ph8EpnHpInMtpasfpnKz+xpFOUAPe+Z3gGZ7iOZ7k
+WZ7meZ7omZ7eqQKUaBADAALwGZ/yOZ/0WZ/2eZ/4mZ/6uZ/wGQMJgQa7EKACOqAEWqAGeqAImqAK
+uqAMGqBokBDrkA4SOqEUWqEWeqEYmqEauqEc2qESug4JsQbqOaIkWqImmp4LkHJ6wJ8s2qIu+qL7
+OQCleZ2EtpvayXNdGJ13OJ3UOYbWSaOFlp03anUzCqR0ZqND2mjQqaNCyKM9eoQ/aqR1JqRJ2mfK
+KaW62ZxVumhLyqQj6KRPioJRiqVyRqVbqmdXSqZ1hqRnymdd6qWvB6ZhSntjqqZ2BohtaqUM0Z0n
+2qd++qfmyZ4I8Z7+MFqohnqo+OmfCAGgDdqojvqokLqgD4oQEeqhlnqpmJqpHAqiCCGigPqpoNqn
+KXoQELCiiHqqqFqoMhpodrqmWpqnevamcNp4cjqnklenrUpjZgqrRpamuYpjbMqrSCars4p2tWqr
+boervxpjuyqsQ+ary1pjweqsRUasxWp2x4qsSaes0epizUqtQMaRWrmZ5Fqu5jqWaYkQbCma7Nqu
+cZkQdBmY8jqv9FqvfzmYCFGYkrmv/Nqv/gqZlIkQlnmuBFuw5NqZByEAn+muDNuw+ECaC+GRTDmx
+FDuSamkQJ2mVGruxHAuTNokQONmTIjuyJAtgP4kQQWmUKruyLBv+YUiJEBlWsTI7s9XllAkblR2b
+szqrsVjJqt1qY9MKrkJmrdcKexKprWLahz+rq3gqtEUGrUsLY0HrtD9GtEUrbNmKtMrGrUv7rU4L
+tVHrYlNLtaVgtVcLbFmrtcjGtT/rtULLkVHgAHI7t3Rbt3Z7t3ibt3q7t3zbt3JLA7eGAZ4wuIRb
+uIZ7uIibuIq7uIzbuI47uKCQEJ1ADJRbuZZ7uZibuZq7uZzbuZ77uZTbCQnxBVVQuqZ7uqibuqq7
+uqzbuq77urBbul+QELjgt7Z7u7ibu317DqIRCI/7u8AbvMLruBhAWsZ7vMibvMq7vMzbvM77vNAb
+vdI7vdRbvdb+e73Ym73au73c273e+73gG77iO77kW77me77om77qy1VnBEblsRXNlEGawRa6ARr0
+K0nzEhRCcxDlwxZScRdxYSnRIxRwsr4GfMAPkQJUxQtAYFdDhRhqQCSEhRCh8TBGdMHumx5ptB3k
+gSK4UQcaYxXKssAIXMImPBCqARsXpMF+EBcSxUB0wRVJNDnkZcFEdcPRJB7bcUkFUUuAEysnHMRB
+TFMt7EVpUkRTEVYZVMEChMEGZDV/cyN2IUOpoUtRBMRCnMUHrMD9IRm+kkqE0kCTUcNNjMMvHEVS
+fMYcNcJa3Mbqm8JLIylcDMZ2ARe3VhVskTIzsy0eoxV6BD3+ilEv5vNVblzI3qskMXIx/aTGhUQw
+2EHGH4S/TvFFDrQVVIzCVvzHhrzJ3ptTldO/ZIIYq3LHB3TBTEw622FH0bHDJOzDaMzJsAy+9vFD
+qHzGFyRdCXHKryzJ1+EhGlzJTQM/t2E/IUzKsXzM19s8aSwzvDIzuQzJeJzHzJy/QLG/G1wiTXU4
+kYzM3NzN3vzN4BzO4jzOZpUCr3TOr4TLH4FE6PxKcUXO8BzP8jzP9FzP9nzP+JzP+rzP/NzP/vzP
+AP1YuTPQBF3QBn3QUexXrHPQDN3QDk3QCb1XpfPQFF3RFg0hjtUzGr3RHN3RPGPMZiUzHj3SJF3S
+NwPSXAX+yia90ixN0hm9VXr1Eyh9VTKdWDWNWEOF0/K7VyOCWDd9WD/9V0HtVzl9WEWtWD0N1Joc
+0kvNVUO9V0dN1DutV0ntBZhw1Vid1Vq91Vzd1V791WAd1mKN1YEz01b10zfwCmq91mzd1m791nAd
+13I913Rd12p9A2WdWDl9DWPd137914A91l5AOC/NgWRLZD331DGNFWKotlub1zrNeYdNZLAW1YiV
+1PZItond1DTN2I5Np5Bt1MjTjlRb2VOdV5g92YgX2kLt2Z99q6wt1ZKt2kFm2oW9g7QNZJtt1lX1
+04392ioY21A92rkdroTdWEnNCKm63Mytn8sg3IsdHur+oKnUXd3WvaHqAN15ldOE0Nze/d3yyQjH
+zVipXdxLpt1u5dvATXnojVY5DYXm7WO2jdySkdlUu9s27drrva3tfVbvTdpfO96LVd7mjd8+rd/7
+bXv9Xc7EHd/zTd71Hd9lu+BOjeAJnmzMptjb3eDm/eADLhmECt4inqqKOi+8rU4/XanXveIsrqmc
+auJ6fR2lOuI0fqqryhen7VYEXtwGrtTh8dsXvmYZztlW9d8S7uFIHeHx3eOt/eNBruDaE+Oz3eEC
+nuSGXeAU3tlO/uQYnuVFzuHFjeSJldTr6rBmLppyCeMHHh76+q9u/uZw3pgBq+aiPRAKe+Z4DpoQ
+i+P+t80LjpAFgB7ogj7ohF7ohn7oiJ7oir7ogO4DXt7bWOENLTvplL6y3vDo6pTTAtANjN7pnv7p
+oL7ojlDlY67kWB7lay57XN7lqF7nvXfkpH7Zps7jmH5O6r3qxzbkJ35ORu7gsX5YO57bTO5Xt47r
+Slfr5tTrVK4eOY5WST0MbRDt0j7t1F7t1n7t2J7t2r7t3B7tdIDsgfTT8FAG5F7u5n7u6J7u6r7u
+7N7u7v7u5A4P4M5HOQ0BD9Dt+J7v+r7v3D4Mv/5XwU7bwy7RFm7sfNjqf6XsYf7vfhXwqj3w0a3q
+Bu9pui7lr+7rzN7n9u20EJ9XxT7xB0/nCQ/muS3+5rJ+5bSO8MRe8CCPZhUf2Re/7HxO3wNBfRV4
+8zif8903fipP8OFhfwMY9EI/9EQfgAXY83rF3Tq/9Eyf8xeY8TSP26cu8iu/5S0v5PO+Rwpf8gzP
+07Mu7Fl/Qh9/9S4f9iG09bRt8sD+9QJv9iA09mQPd24PPGiv2moP8Gz/8HP/M3Af9wC596ZS95N9
+9w0vGe4Gc4if+Ip/b/2G9B6PFRDXcZI/+ZRf+Rv3cY7vVvW+covf+Z6P+DIH9RCO8mCf+WjV934v
+Zi/v6jEI66L/4aTf9qZ/Vqif+m0G+KAi+IdN+F4f+3o/+0xt9bb/98Cf0iSf9l1P1ZIRAnne/G3+
+meYant5Y8Q1jUP3Wf/3Yn/3av/3c3/3e//3gX/3fgPufoukL6/zoL18hkPyoLRl/HurwH//yj+iO
+XvxaPhCSXun6v/8Sdun2/+UAwUuggG5ZDB5EmFDhQoYNHT6EGNGgI4G8UgComFHjRo4dPX4EGVLk
+yIwAUlT0VErlSpYtXb6EGVPmTJo1VV6qeA/APZI9ff4E2lMnT4FVphxFmlTpUqZNnT6FGlXq0So5
+dwbFmlUryYs58dkEG1bs2JqeKnbdmlbt2oomUZKFG1fuTJwCh7LFm3fk3aJT/f4FHFhqVbtX9R5G
+nBEtr3tf5z6GDNeswMWJLSd2KzBlZM6d6Vr+JXpZtFq+vIwKRp1a9VPCjA2Php11cWPPtW2vnGwR
+Y2zeWzPzwuBJ+HDixY0fR55c+XLmzYWDAt1butDXX6pcx55d+3bu3b1/Bx9e/PUv0aefBzk7kHP2
+7d2/b47h7G709UH+tp/fdWj99kv3r+8/AM+rbEAC6TMwP/wS7E1ABmNz8MHRIpTwsgIrHO1CDGNb
+cEPLKPRQLxBDxGtEEtfS8MS8UlTxMABWuSdGGWeksUYbb8QxRx135DHHSV5rUUQAJumxSCOPRDLJ
+GH/kL0i8LlIySimnNHIVBJ1EDAAtt+SySy+/BDNMMccks0wzm8SSNDPXZLNNN9/0Es00t7r+CE47
+78TTzTkTo7JPP/+U8Yk92XoCUEMPRVLQQdW6BlFHH8VxUUknpbRSSy/FNFNNN+W0U08/BTVUUUcl
+tVRTT0U1VVVXZbVVV1+FNVZZZ6W1VltvxTVXXXfltdfD6rAgIwvqyOiJk1zDyktjkOVFWWYz0mlL
+cPz4qEsqQrtmlToAACcFQaPt8pYvj7WACi2pCFYgbjWyUk5f34V31xSAyAiIVRTbTaeN1ABCSyAU
+5QjIwtRFU1+NDOZlWGo7MuwJbQW9po5VruFFDSqo0EjgZvlbhYqF/aDi3mYBUCOjbd2NN2WVY1UD
+AEWfAGBhXvzYdmCNwFnliSeoWJbhgnf+0xhhqxQDx6PXYObJGHoreqLbktB8zQJwAOblCWCbpeLY
+mc1FeWWvv0YVnHRprugasfO9khdjFBU6458J3qjtZ3m5BgCKAw7Nap1J1mgSjNuCOjQqJtkoBYyH
+LFqgVZgEu3HHUZ1Xca2NIRLtj1JIHO+4gX774Cs1hrvqVaiVW2iNXwsao53AKZmXOuru+nHZZ6+0
+ZUHraD1yg+UWyNg6UPbSZi9PKv1zd50t/umNUH97pxROAnlj2qen/lJ0/Uj8njq+tXyjSeow5m6f
+Nw8d2rSFrlt8tyv6UQ2YW2f/7/IBr2hw7w+/R42iF5e+ev//T9Mk7HWsOnEpRmnDXOz++me++dmM
+gWfJ3PL4cxWlFctp9FufQIZFNasF6yqse90CAThCEmKobqwj39yqxreQpK6BKnyWwowWmu8JJGIT
+q9jFMqi8inTsYyGDm+H+BroSFtGI9qFCBIfmGi4ZA1xbmmEKv8TELS3ridOqFpeoAL9sbatbVBNh
+A8t1LsLBrWVlJOIR1bhGNrbRjW+EYxzlOMdQpcAYd8SjMeCHGAvkEY/pomMgBTlIQhbSkIdEZCIV
+uUhGNtKRj4RkJCU5SUpW0pKXxGR98rRJTnZyS1pD1RM9OUpSnmlVoixlKlXJJVgBwBjPg2UsZTlL
+WtbSlrfEZS51mcsOlUonq9hlMIX+OUxiFvN57Trli4y5TGY2M5jGSJuqelmqaY7KRKC65qey6SkW
+naqao/pmqLbZqXFyqpyb6qapwhmqdWozjaI6p6bimal0UlNryshHPvW5T37205//BGhABTpQguoT
+fu30VGlc0AKGNtShD4VoRCU6UYpW1KIXZagLzJOq0lSioB8FaUhFStAozKeVWsuHO1S6Upa21KUv
+hWlMZTpTmtZUpbMIDULJ+Rpi9MKnPwVqUIU6VKIW1ahHRWpSfUqMjYbyNS+waVSlOlWq1tQBJn3V
+b1JaVa521asyxWlbQHmq0vRUqWdFa1rVilSmFkaB7gwNVL86V7py9aqUiWaqtFr+V772laZhVddY
+TVXWtRbWsIc9alv3k8y4+tWxj13pXXVz0opsFbKXrStgmyVYX/IUsZ8FrWEVO09MlUaumEWtVyVb
+T1L9BgovgG1sZTtb2tbWtrfFbW51u1vYLgECYmVsRWxxDOIW17jHRW5ylbtc5jbXuc8lri2aStbX
+GIK318VudrW72xFg1VV7TW14q6pZnZrTs6FFb3oTO93BPlW875XqavOKKvDC175gzSlnSUVY9fbX
+v0tlb2cbe18Cv1S+lBWIZQu8YHeQV7/WPO9/JRza0b5TnO5lMIMPnFWtEWEWHwZxiEU8YhKX2MQn
+RnGKVfzhDAgAuKoqTShUMWP+GtfYxjfGcY51vGMe99jHMw5FgPf7miWs2MhHRnKSVbwJ77bqNw14
+Q5SlPGUqV9nKV8ZylrW8ZS5HmR4uDmxwBRIHOZTZzGdGc5rVvGY2t9nNb4ZzmeMgZAiHRhNdxnOe
+9bxnLpOgyayqb4YJ7GAx88KsE0b0YSv81oRiWNAE3vB3UfroAhMaxhFOdKbTuuhCn5bS8I20kyf9
+aftamqOY1nSq2UpneDqa1OINNaC15oQa1NrWt8Z1rnW9a1732te/BnatVfDbMF86NGjYRbKVvWxm
+N9vZz4Z2tKU9bWonGw2svnBo1hBsbnfb298G9gL+vKpAvzq1pnZqaA6tanb+F5XTxq6Ip82N2liT
+e9TzPnd+C73udvcbqO8+9YDxTe9xS/PeA78suqmrbn83/N/YxqarEf7Yehu8shPHrMLby3CHOxzg
+6Y43xi9bcb3OGtwnR3nKfT3sFwe8IsiudsxlPnOaT/vabi30tlW+c56fXNx4RTAvFCzyvmpcwBXh
+d8fZ/fGFh5zojiU5fQ/+9MzqG94CSbrSU830jTud6nyNujen/vWvGn3IHNd6u7l+dIHIm+yqLXjJ
+KwJlPtfd7nfP8pdbDvIxx9nvfwd84OE8Z5xfnRd3xnviFV93PwOdwxXxsJIlP3nKn7jFe2+6QGT8
+Y8533vOf73GQC+9ygRT+ufKnR73kmex4SV/87XQ1e52RnvZ+r/3sXn893Fkvatfn3quxbzXaab91
+iMMV976vatjVOXbkSxX42Z798FVte9m3vfldVb49KzKEYHTf+98Hf/jFP37yl9/850d/95VA7M0W
+WhZHgH/85T9/+tff/vfHf/71v3/4y6L4jQ6NEUi/ASTAAjRA9HODuJO63ru+qXq+iBM+6Us06gu+
+42tAm8q+1mK+C5ypBzQ+rJNA4hs9vuMFt+PAmcpAcNrAE4QpDwTA6AvBCfy/nRI4FqSpFBSVcrPB
+mHJBGoTBGJwwCoQ+69vBG1RAsdu+OVDCJWTCJnTCJ4TCKJTCKaTCKlz+QkLAvK4TCCyYhi70wi8E
+wzAUwzEkwzI0wzNEwy7Eghk0r9CwByuEwziUwzmsQiY4wuVjwCJsQasjPUMDQhkcwcwrQT1EwTvU
+vgQjRPzKQrbzwz8MQjbcFNNKxJjCQXZawUTswTb8QUfsLyGEQAucRJWqRFDRwVBsMD4kwazjRAqD
+RHmSOFN0h1H8lN9oAmWwxVvExVzUxV3kxV70xV8ExmC8RfEpr0h8DRGQgmRUxmVkxmZ0xmeExmiU
+xmmkxmQUgVbMlNIQxm3kxm70RmG8AkPUQFkrNBI0x1NhLRUkR8M7Ry1MlXTMwQdTR3YUxHYsFXhk
+J3Dwo33kx370x3/+BMiAFMiB5MdidEWeIciEVMiFZEiC5JpkQsiGlMiJpEiBBIf5OpWK1MiN5Mg/
+WhU16MiQFMmF3KNTAcmRRMmU7MdMYsmWdMmXhMmYlMmZpMmatMmbxMmc1Mmd5Mme9MmfBMqgFMqh
+JMrzuJqKGJZiORbeGQnkAZousaLz4RIsAomWWZr5QSWTQCXisZaFcaUHEoh+OShncZaiNEv0iJyK
+sBd8caCK4Bd/ASMeeiAX8hykrAOZ6Yg6ARgieg3eEZoU2J6RKaNngZkOARILO8vEFA3b6Z2YqQia
+6Z6MwBmd4ZkoqsswgqG/VKKNAJajxMzy8UvjaRZjCMxnmQRwOE3+CZJLxWTN3hAbgSAbGzqbthSI
+taHN1RSezgFLurEbj/ADl1mFq+TL0AjNjKGYnaCCpUGYrKmbkjxMRmvN6ESRpQGmiqCc3cFIzLHM
+udTNJcIgjgjOmXGZFwLNaPpLNMofxzSY5uSFrNmhz5TO+MwLxsQdyqAX7OwI3wGeLhGeLuHKFPpO
+zlyYOkDP8SmMLuEJUTrKqwDMQtkNvxGIGlrN4ZHPCsWL68mewMRP7wEf9VHNy6TL3UyfjvhNLSLP
+BSrOHkocwwgZgzEXLsHL57TQGc0LAapO3UBQuUmgFuqcEPVOi9jMHhIZ8TzO4yFO80QQgzGMlumK
+ERUIIApQxKT+0SkdiRMqSWZpm/cRCbr0UQeSIY6wGrwkUPjsSyTlzvnACMPJCAmdHyml0jf9iCTi
+COxsIlTaziWaIlGKSmnBS41IyozomJFhpe9EpajMiLqhFiAxF15AzUN1zDYNHjiV1Eml1Eq11Ev1
+HzvaxyvNiz7aR0DC1FAV1VEl1VI11VNF1VRV1VVl1VZ1VQNxpliV1Vl9Hme4BVrF1VzdJVRwBlTQ
+1V8FVlniVV8N1mLV1WE11mSl1VtwBmV11llVl1WS1mml1mq11mvF1mzV1m3l1m711m8Nk2KTJmdY
+FUkAAEko13NNV3RVFWfASFFBC4PUFAAgV1UxV3ZNlXtd11X+cVdWiVd5zMF6zVd1tVeCHVh8RZV+
+XZV/dUtIcdg+2UuBVYOHpdgoqQh9tYuK1dgjuViD3diP7ZGOxVeQJdkcqQiFrZqSVVkagR+GTbDU
+g9mYTbEMyCmB9QR8wNmc1dmd5dme9dmfBdqgFdqhxdlCENmK4AbQU9qlZVoe44ajFQhrAIOppdqq
+tdqrxdqs1dqt5dqu9dqptQao5QXTk9myNdtZoIGTpY97YAWiddu3hdu4HdrccFmhg8WWIi+bvY29
+7Yy64AWMbcRV7ESxPY3VMNzDFYzWAFwTDEXJQlna4NvInQu6BZpLJMS8fQvJ1Vyy8FvAVUXBRSzF
+AtzCRdz+0jVdp1Bcg2XcSXTctXWMzYVdm6BccR06WMRczYjd3KWJzjXYzwVd0SLc0xXe4UWK1MXX
+1U3E1vUK3WVemJjd9hOIczCD6aXe6rXe68Xe7NXe7eXe7vXe6eUC9qPXiuAAAjDf80Xf9FXf9WXf
+9nXf94Xf+DXfWhDb9+O/+8Xf/NVf/fM/gQDcd0CHABbgASbgAjbgA0bgBFbgBWbgAH4HsWWH75Xg
+CabgCvbeBBQIlIWAP5DfDvbgDwbh+OUArCrFULxdXtiM5lXhmxBb3/3dtRJdgyVd4qVhwzVeUGxc
+tV3eFV7h5y3hSTzhFOZh5uVdfHXhF9604K3hJV6NGyb+wrsVRR22i9cdYt31YcvVwyCu4uYt4k1E
+YkVTYiYW48Bw4kGE4ijOYNfdYua94jy03ZrN3DWO3S4GwS8GrRjG1xke4z2GijJGXkJU3imW49xt
+Y4EYAjpE5ERWZCrEQnUR2B/QgkiW5Emm5Eq25EvG5EzW5E3m5EiGBbHlwjQU5VEm5VI+wzX0X4M1
+B3Jg5VZ25VeG5ViW5Vmm5Vq25VtmZXMQ2zdc5F72ZUS2wzSuCELo5GI25mNG5k7+ARLG4iLU4kGG
+XToOXDsG41TOYz7G5qjw4zNGY154XCqG5sgtZLvl5mcOZ8mV5iOm5lWz5orQ42yGZ6oQ2z/Ww0Bm
+DHD+PufbGOfaNUVzzue9Ted1Dt0wjueCnoJt5mZ7htx/3tt95uZTbAu9ZWiAbmGBrua/lWGD1miE
+PmOFxueJ5oxx5r4DJOmSNunyW7+IrohhaIOWdumXhumYlumZpumatumbxumWpoP63d+e9umfzr/+
+xWh8hYcyMOqjRuqkVuqlZuqmduqnhuqoNmp4EFsBPOmrxmqSxmBvpg8IeICcBuuwFuuxxulhYGY3
+7mc4xl2Qto2AtujCwmN31miD5mgo9mi2tg2HLme1RmG8rg23fmu1iuu+mOt4ruu7vWu/7gy9PmN/
+VuzHAOzARqvBNo3CNux5fujEfmzIGOfIO9vPTr3+y3PkinAFPjDt00bt1Fbt1Wbt1nbt14bt2Dbt
+ZhDbzWva28Zt0BO9oa4IMfja3wbu4BZurxUDsSVb0EbuyVs9rq4IAWgE2Ybu6Jbu6Y5tVzhrgaC7
+xdPu7c47MGsWgVUAuRXv8SbvoDXadu47wVPv9WbvNiM83hYIcTiD+abv+rbv+8bv/Nbv/ebv/vbv
++RYHsUU87ibwAn+DxmPugWjb8mbwBhdvBbhucm5svhbizZaLyJZspaLsd7ZsJj5sWNRsC5cLxoZi
+xxZxzq3oDJ9sgu7wMf5wUwzxEycLEr9bE5fxsMBwFV8v9K7sFufjF89hYRbkG5eMCKe1nkPyJF/+
+OfEV2AEAgSeH8iiX8imn8iq38ivH8izX8iePAbGFuZoD8zAXc2i7OfjmhXVIhzRX8zVn8zZ38zeH
+8ziX8zmn8zRfB7HVOSXX8z2vgZ9LcF6AAD3Y8kEn9EI3dC0fgAjnZxOmcCKHixzXcXdjcR9fYiBn
+XSm+Z0efcUV/aBvX9M/gcXWO9F7YcErfY0tPXkxf6E+XXU7fa5Vea1a3CUgfdaEqdVMXY1QHZFX/
+aFl3XlefcFjva1+vCVqv9YfjcQ7H9dPV9XrmdWIviwgvAj6ndiVv5O+uCEY49G3n9m7H8mUQ23oY
+83En9zCvB7FVhzpX93Vn93anc3XA82qX953+83OUJQRvx/d873ZGAPYSb3RoB3UzF/VIv/Vlr+Fm
+L8IYB3iXoPE3FvYKX/iWMPZjB7BkN/hKx+yEfvaI/3XH+2FM/HeOd4mJp/iCv/jhRfgdVHiRL4Vx
+zm4Dh3nF07vRFojwdvCbx3nzFlsya++e93n1fm/Ale//JvqiN/qj7+8A5/EBj/mmtzsER1kBWPCc
+p/qqxwcI9/gOS+6tlzzRxnaBKG3qFvuxJ3vXpm0et+3cVvu117HdBlzfHu64l/u539ri5vHj5vq8
+T7HljvrnLvu/B3yxt+6sR2tGf3iWH/kUp3iiMvmTZ/aM7+iNR3zc6PcaD/nJLwWSP/bGd/z+0k15
+G1x5kW/4tD58zGfhUF98Sbf4zhfez2fB0Of4ca6E7aL92rf93FoCvg6ES+D93vf93wf+4Bf+4Sf+
+4jf+4+d9KwDlTGD+5nf+54f+6Jf+6af+6rf+62d+VDZzFmCD7vf+7wf/8Bf/8Sf/8jf/80f/7mcB
+sbWu23f/96d9XFD1QkD++rf/+8f/4w+ECNcrgUUVwAUIXgIHEixo8CDChAoXMmx4UBIASQ4nUqxo
+8aJAiBIxcuzo0aEzAB9HkiyZQiQvAClKsmxpEYAzlzJnItRI8+ZNmzh3ttTJ8+fHkECHejwpUCXR
+pBdhKm3q0KfTqA8jSq1qEKrVqkKzcjX+mnLVvbBix5Ita/Ys2rRq17JVCyBa27hy59KtG7YVgFZ2
+9/LtGxevXr+CBwsGTPgw4rnRACRu7BjtKpQAJlOubPky5syaN3Pu7Pkz6NCiR5Mubfo06tSqV7Nu
+7fo17NiyZ78W+Pg27rCSIOTufViAJAG+h/sFLpw48rrGkzOXC0FS8+hxuVKvbv069uzat3Pv7v07
++PDix5Mvb/48+vTq17Nv7/49/Pjy59Ovb/8+/vz69/Pv7/8/gAEKOCCBBRp4IIIJKrgggw06+CCE
+EUo4IYUVWnghhhlq2N0TFvBizEIgJmSMMSlQoUaIaohI0IofbvgijDGilwKIIF5DhTH+JxbUokE1
+NsTjQC0CKSORRRqp1CQe+rHSkj5a4Acv1/BYIonXuPjhNeCkoOU1JuqYQgoe8rJll7xYQAUVHoLo
+B47gCDTkkXHKOadH1wDByyrXPOFji0vueA8v96xyJZ+8qHHnjR+iGKSLVDzBCzh78uLoE3XQeSmm
+mVrkIxBW+mgoECvtyKiIhVpQolFTYqnllvd8Cqemscp66SSrqEliHacGusqjPQIq6KSGFqrGSh1e
+SeqVkzT6RKWzOvssndcA0OubLq6CY4kFgUnio9eC6aKIXkJZarUgnknFSmvieOex0Lr7Lrzxyjsv
+vQx1CSaYVta7L7/9+vsvwAELPDD+wQUbfDDCCSu8MMMNO/wwxBFLPHF1VOhrgbK8GNuuQiSSqOaH
+HqfLIonoHlRHyYt6uZKKxqBM5ctK4kjFuIMKtAqsCIUpkJ0DiZkzySSOzMvLxqhYUNHUBukyiSiu
+/GbJYlL0hJs3L2os0AQVjWKNIrfrsckGvazjmGiudCrT28ZcdtjG2Ixn1tqK2bNAPzvkcbZde/x1
+yaIS1PLLvLCZI5Qh57jo1FXjuWjhcQu0tYhFgzxQ0ifnKOrgNJuJK5VMG822qG4PhHNFFtedsZnV
+/ugxyHh/CvXlBqGNMpMzFz424hdNknGnAtGoepQz5w58uaMyerPUx0u6s5l+Czn+0D1APPoEEK4q
+Do7jAx0qUJK2odSil8kTTyiLxgN70IrMWzB0sBYBsSgVA/3e4o2H9ziqqsfjKf6Vy4u5vv6Opb50
+XS97AtkeL7o3JnINBAho4p+q8gc8WyFERNGbXvWuRLeKvE8g8TPU9whyD+Hd73gSvNL5jBe/C2os
+g8RL3/8IOBDsVWR3AundAoFXP7KVr3wnXBEF0Wcb6bUQUCLa4EUSRTWBNAl4T4oSkCJoPB2yq4dP
+YN+xnnczfUUJZ6uAkh9IV5FITcpK1GPgzTxYQhP2UH9wWtHzVvTBigAwjEycH0GeKKU1Fq+Nx0Ki
+6q74tQDC0YdfFJwYKUJG0xH+C43EEojiAgiuKf6xisbL00CuMagjWnIidbSZGMGHIkAOkmNa5Jjq
+QIRJnr3tlHE8ZBgNGDyNVa2RToTSHik5ST+uiJSqW2UXNdhJi1jMT5JC40D8tKO9gYt1pRwf0XBl
+xDa6cplqGBRYZDkmCzzhgyk4GioltcymXaloppSkG30YtYssMQVQOiYqBec3ygmtXM48JSpfVodp
+prOf5bomnlxlkTB184biBBIp8cY1w+WNlxUcn97AMTyHtBNKk/ADMpM5z8fVM3IeW6g/tZYjcOQy
+pIUkFUCzScxrKFN6GZVnj5ipt4YS8qHnxJ1HdrcKFPUOmYfaKETPqb+ECqT+oNXUHzA1CaL4xU+b
+h8JYoIbWoiumQGlBfSbw3lhTbRrkfR/sKcd+KkQfUrKXwxSRUampVmQxNZ4LeaqyUsDPqa6CV3zc
+ZU15NsxfclGTbqWIV1tIPhGuAqil/CE6r3SopLZyrcVrqzZ16rS5/i1UY0WWQ/VqU8b+1SJ2+qDH
+cnUsQVlVkq974eggyKgB5jVQRKSeQFNQ2M4mhAq9m91pO3jZVPoRhW+bImu5WhAL1BV2uWoRaW2K
+2dYGUa2sRa3vYugi2WJxIra1Eo1cxr49cVGXp31mc8332gwKN4/FBZzRWgRA5Q42rym0YvXGCyjo
+brNuI6MubQ/yWd/hin3+yd0tXukb3h6yELb5BexGPUqia9XTuwxNF+vAZljJ+c5smWWi7VwkLU/p
+bo6qK5oAzOngaDYNbyup3G6fdmCG1KFwpBIZg7PlYBOTOL19s9zHKhw2+oKuWhtecUEm4eFyeuwE
+2CPRXWc60+zGTrmZa9xIWtxDEx9Zxpml8NZQjLSPCi7Dre2xhgHAYfclmKMLxhZQI4g3hqKtyZd9
+MjQpJuc5y+he+OouR/AFpvmqZ3344t9F/AwmQGfFzvn6iKFTgOfz6FmuIxE0865zj0aPJNGLNk+j
++dyRTNO5057+NKhDLepRk7rUpj41qlOt6lWzutWufjWsY91q0frMUgP+EWSgULIUy4DoHpLhda4N
+4mvKgMPFB/F1rpPHmGFbZiWX6bVlNJcSTWvN1rdeRR0AUIeqHuUy3aYMDvkIhN9KK3d+YwxGmE2Z
+YKfE29MuiLqLrRBkpwS5IsEMiDDz7cnIm91dBcDwXDUZ3ap7Mr+qTL8REm1AneQy1JZ1VFJgyXET
+xCv0ruzASzsQdMNbMg+/OPR0bQEpIwTZvq4DtTh+FE2rPOQVR/m7DeKHybi4m71Tg21XfhCOPwHb
+pX1kMq2dwEh6JebXzjYPha1rlxudIC3398iN3fFuow7kLX+6zn0Hc5DfejLzVAMAlHXFrS+d6WYi
++c7n23OYew/i1gH+e6+eAAAX+yHbbS8IOHjVTVhhnd59L7u/xxTJqfvayldn+cfLjm6s82LcFPdd
+JMFuJca33MoDmQS10b7je9g966Mznc9LDni/P7zpgd9SQvzusl5ZHfFpd/rBDzIJcMyeRfNMU+DN
+LviEqFzufOa6260CDjHVPZPDRwnwjcF6wG888Z7X/d15JmbR5xrsizo87JVekOljXe5+GPlAqIA6
+2zyK8pq2wOBRWVyNAbyotNf10x39fBGO3uOvpz9Bfnxsj+c88Ng3yNWhCPBNiqK1H/vljhpYyQCC
+nP4BIJ9VCrUMYPBFHLvM1ptgHvIxn/ykX/Npn+nlXu4xXrAh2+/+NN3/4Z/8ZAzWgZ/3zV8HOiAK
+ZtJvMZGtnYn8yBX8lZ73XBoIkt79QZ8Ikh7YQUnrZR8M+o7NAF+5EWD0TZ0HvuAR9pyxSeAENgXc
+EY3K3Am9SeDY6WC7VcbdXcZKAB/XBaFIIBvVeMgJfiFljKFl0BrWWVbjsYsIPtvzcd1FnQyUAEHG
+jJC/ieDIjV/HVUbsseFkiMjTlaEO+mAKoFwRbhywGSJSgKCQcY+tSWDBZeD26aAdQl8VSkWa+EHV
+cN6jbCHzTQLK8KAL+qATxmCUTN/+sRspruHfEcQqVM3TyZ1lPIr4DRegmF8eDd5ejQmvTF+lFOIH
+3gM4gIMX9qD+/R2h7jWgE3IcFYDF0q0hFFrA9AEfFVgGLhmgbXjIAi6dNBphAoEjFX5iUkzCuIlK
+wxEi8LUKQ9RiMtZfxXFg211cqNCi8zHd06Ff13kI6nUdlABjkMwT9SCEGuTKB2Wis1Eb5wliLE5j
+6SXi0g3kRHIc2BWdCVak63FdA1bjm8yTZY3jPfKe6zWhOkaFtEiUB3Kd3E3UD/pjP8Zg1KXeGepa
+pfDjE7Lb01keENyJzVnJjXyQQa6d0lgAoUEK7T3h0/UiQ5DhM25iK94k9Rldw5njB3Zk7pkIQaCi
+90zCo6CiAjLfxVnlD4KlJ65kU1ABB5piZRhDJqKkB+pbwUH+G7FJHeEt3STQorcx4NxJIgSAo5lM
+i8Zgm7bZlSQuXmWEm0ElxEks2sV5m8NdJQpixi9aRq7l5bxN5aRcI8tVZstpyWa2YVNmUmAGSjcC
+AMGJYWkCQMLtXGUkXTqypW3eJm7mpm7uZp65DjnhRJvhzVJSSHA6E060jOsYFnsUZ47xpnM+J3RG
+p3ROJ3VWp3VeJ3Zmp3Zu54D4pnd+J3iGp3iOJ3mWp3nKpH8gp3muJ3u2p3uyJ3r2B3O+J33Wp32S
+p4LA5n3uJ3/yZzc24374Grb0J4EWqHn+Z4GchIEuKIOCJzhooIBM4oD4GoDqB4UWyIUSCEcKyIYW
+iIQKSIb+TqgI9keIciiE9keHEsiHBkiJsuiI8keLAkiK/seMRqjfeAEm5KiO7iiP9qiP/iiQBqmQ
+DimR6mjIVWh+hOgNvAKTNqmTPimURqmUTimVVqmVXimT3sCRJqiuXUORfimYhqmYFqkXyM+JAoiE
+ekIprCmbtqmbvimcxqmczimd1qmdruklbCmBhGgVTIGf/imgBqqgDiqhFqqhHiqiJqqfVoGeDkjR
+3QM+3KmkTiqlVqqdeoKZ5qffqKmldqqnfuqc5qn3ICl+8KminiqqpqqqJiqjjiqXQk+kgqqszmqn
+YqrvnOl/pCmt7iqv1qmo5hqp3oepriqxFquxGmqrAuv+q9pGrPaqsz5rKdjqmOCqf+gqtF7rrv5q
+jP7HsB6rt37rqibrtvrHozYrtp6rp0prjQaIhNpAMrwrvMarvM4rvdarvd4rvuarvr7rAzQqiKrc
+FoSDwA4swRaswR4swiaswi4swzaswG6BvwZI0RHCvlasxV4sxu6rDWRqgkioA7gDyIasyI4syZas
+yZ4syqasyq4syL5AxAJIiBJDL8wszdaszd4szuaszu4sz/asz84sMbwsjeraPcwCyx4t0iat0q6s
+A3Asgnjs0kat1E5tyrqsq+6pysnsz24t13at1/Zs0F6toxKt0VKt2Z5t1DbtrWrqQHws2r4t3Fat
+0Pr+R8x+rd3eLd7ybNgqq4aSbdz+LeCGrNpOK9sKhNsGLuKirdXyrYjymdbmLeRG7tfu7biiqN8m
+LuZS7eCuK5r6DQqUAOiGruiOLumWrumeLuqmruquLuh+wtySqMrRAhvMLu3Wru3eLu7mru7uLu/2
+ru/OLi28Ln8UHQSwrvEeL/ImL+uigNMeiLWiK/RWqra+aICqXJ+CK/Zm76GKK/XqR7lGL/hOqrpS
+a388b/ier5xOb7DaR7dqr/u+L/eub318L/rWL5yOb+HyAqfaL//iqfBWL59d7/sOcPbG77IGirn2
+b/3ib8d6rvI+MARHcOq6rtj+K59RQw5ksAZvMAf+d7AHfzAIh7AIjzAJZzA1/K/36lrxSjALtzAE
+M+/aNnDbZi4NR+3iVi6MZq3k7jAPgy0K58ejlm0NDzHLbi758gfUErESy20Fu6jj9jAURzHNUm73
+AvHlLjEWk6wR5+/hZrEXu8MNV3Gp6rAUl/EOU7H80kcQfzEbb7EMGy4bf3EYp/F81K0Z33HeovEB
+F20ce7EbP63fhIEJDDIhF7IhHzIiJ7IiLzIjN7IjD3If/PAY81nAOqwlXzImZzLDQmwTy6iuEcIj
+h7IojzIpP3IYNK+BmK8Co6/6Yqj1EjAsg6sB9y2srjL/MjAgD8T+2vL5tjLWBnAsB7OxzvLY1jL+
+L6MvLjvvph4zK0uysL6yMEdzqhKziRozM4NvMqfyMl8z+Ppy4w6EAEuzOG+vM9sH/XIz9Gazh/rN
+NpCCO78zPMezPM8zPdezPd8zPuezO7NDOddHiD6CDAS0QA80QRe0QR80Qie0Qi80Qwf0I/SzGqsw
+GegzRVe0RV90Pm8DKq/zDPcxFs+xKz8xHo/05EL0fKyxRy/xHytzR6c0EYP0Lw/E45I0TfusHtOy
+bQixS9fwSmtzS+80DcP0NwvETNe0UefsTRdzTgP1EPc0RwvEKcyCVE81VVe1VV81Vme1Vm81V3e1
+VC+BSctHiFKAKpS1WZ81Wqe1Wq81W7e1W7/+NVyXNQWEdXwUnQBkgFfntV7vNV939SlstIr6jSNk
+AWEXtmEfNmIntmIvNmM3tmM/NmH7AF3DR4iKwxlcNmZntmZvNmd3tmd/NmiHtmhftjhM9nvYdTdA
+tmqvNmu39mM7AmAPiCqj87V6swWD8zjnNrKatnucM21jqzoHti7/NrrathPjtm4nd6BSs8QSbQIT
+t7MGt2xvM3RDq3HDLDQrt3Yztydbc3VHd2zb6ECgQBCUt3mfN3qnt3qvN3u3t3u/N3yXNwUz7m0L
+xAxEAH7nt37vN3/3t3//N4AHuIAPOH7PAG+3B/GOQnwvOIM3uIPDNwwT7hvzQhczdeIKdX3+80JR
+HzWHT/GBswdKWzjmOrVww7GIYy6GHzdRdziL12xSV/NSn3jikvh0/7SM/22KY7dItziLv3hzQ49O
+33jc0rh4m7iQ4/iHr4cd83iH+3h3x/iRD3l4s6vfPEMYXDmWZ7mWbzmXd7mXfzmYh7mYX7kOJLl6
+hGg1/IKarzmbt7mbvzmcx7mczzmd17maV4OZp8fEjjmf97mf//mYP8OUd+5wf/ezXje3Zrd2Jzd3
+D613G/quSneR6y+kOyui062iL3puNzq5Onel96qkU3mhfzqtXjrsArOmM3qez4inkzqthjqhC8Qu
+u/qnmnoOo3qqb/qqM1qr0zqownqusjP+Rg87sRf7PfNzJyc6nwF0Qze7sz87tC/0Qyd7pw8EBEy0
+sWe7tg+7RsdwLht5lL9tjiu7TDN5j+86pl1xuKMtkYs6uK+72Y47pu+4uRu1kzs6lMO72bZ7rFO4
+visuupfHktd7Td97tef7v0stvwf7QER1Xz88xEe8VoM1tZ/6QFRAXGe8xm88x8N1BQQ8edg1Xks8
+yZf8w/+1t7O0QAy2a7e8y788Y0t2xd/6QFj2aN88zue8zod2ac/8fqA2zAe90Ls8bKe8T8u6r8uq
+rQMwcuf6OHO65T560lcqsFcrdU+9pS69hWa60wsz1A9vr2M91Q86wyO92Gc9yI9H+3b+vdenvXj4
+9tlLatWXr9/4wgHcPd7nvd7vPd/3vd//PeAHvuDfPTa4fXiEaDYggeIvPuM3vuM/PuRHvuRPPuVX
+vuJng+GDB/EOPud3vud//uD7AtlbvY0n/NLKu8WvOMHbe+Z/R4ibftqOPt2XPuwjLerTvOqvPk0b
+fNQjfO0j7cKT/rv//tHePtPnvu6PNO+DPZAT/9IG/+wPv/OrrPFvPb0n/x0v/8+r+/Qzrewjsd8k
+AuiPP/mXP+AXvs9b/0Bog+W3v/u/P/xXvja0vndMrPnfP/6XfyJ8/37Mdtz7KkDwEngPwD2BBxEm
+VLiQYUOHDyFGfEjQoMAqUzBm1Lj+kWNHjx9BhhQ5EmOVgxQlplS5kmVLgSkAnMRXimZNmzdx5tS5
+k2dPnz9pejoI02VRo0ddAkhx0BNQp0+hRv156WRBpFexYkVpkWRXr1/BjjQ50GpWs2dVEh04U2pb
+t295Cn0ZE21duxCVMoW7l69bqmQr3hVsdyuvi2ERJ1YMciyvwoMhZ1XrmG1fy5fjDqUbmfPZvAId
+ZRE9mnRp06dRp1a9mnVr0T6qBu48u2VhcWdw59a9m3dv37+BBxc+HLe42LSRs5wsoJtr58+hR2/t
+SHNy6y0/8zo1i3t379/Bhxc/nnx58+e5Lzl+nX3DwhVUxZc/n359+/fx59e/n3/+/Arr2wsQoeUy
+QM/AAxFM8LxTqhPQQYWyc8CdCSms0MILMcxQww057NDDCV8A8MH2CiOmlxNRTFHFFVls0cUXYYxR
+xhOJEXHE6ya7Z5YPeezRxx89dKDBGx+MEMgjkUySwxABI5LEsngxccYpqazSyhhrbNJJHDfTUckv
+wURSyLm2dNDIMNFMc0kby+ysxCvhjFNOGLN0DMo2Z8txRzX57HPCMXmZDE/rsjvkhUMRTVTRRRlt
+1NFHIY1U0kMNYXPQwQrLJpNNOe3U009BDVXUUUkt1dRNs7H00rsmg2CJSWGNVdZZJT1kyFVpy64p
+zHjtlaa/7JQNV8EKO2yxY5H+Dauxx4ZltcvKfI2WL7kC3axZznSVVtu9gGX2WrSKTVbccUVa9s5v
+0coR2m3ZfYpaQdEVLNt26XWq23PjzSpccvnttyRV8z1K3XoJ9uldawOua96CGcbpXmETRmpffylO
+1lyIIzZq4IY5rungjO3K7pkwSC7Z5JNRTlnllVlu2eWXSdYBYJBXKqyaX3DOWeedee7Z55+BDlro
+oXGuZmaaU5qMEJiZbtrpp2F+5lakrzrTz6vDZDJYqo96c86vwYazTm+5TqvLPbFOO0lA4S27KKvV
+jttHrcl2OyKvw85b7xfHxtfuiPSUW/Ae2Ub4b5bgHlzxDOn2+3CH8N5b8sn++8b48YYCX1xzDAu/
+PKmlBJJw89EpbNxyzxWKfPLVw64cdcDPJl32zl9XKbsmlMld9915793334EPXvjhidf96NoLE0GK
+5Zlv3vnnoY9e+umpr9765UU4/vXJrine++/BD7/4Jqau/aHszF+o7vS3Zl99x9lv230y53cI/frb
+x19L/fPXX/75/6e/+9VvfekroPkOWLsAxs9w/OMFAMBhDAlOkIIVtOAFMZhBDW6Qgx3UIBXgZ0AA
+UMGDJTThCVGYQgmC8HTpg4kKYRhDGZoQHA3k3wxxmEMdTlANDuSFGnYYRCGisIcOtMAQkZjEDPqQ
+iU104hOhGEUpTpGKVbT+4hWxmEUtbpGLXfTiF8EYRjGOkYxlNOMZ0ZhGNa6RjW104xvhGEc5zpGO
+dbTjHfGYRz3ukY999OMfARlIQQ6SkIU05CERyQsgrAIh1wBAEV9ykBBCDgCVtKSdBGJJTWZSWASx
+JDj8QMlMGgMhBHmgJitJSlRWMpOaBCVZGAKERybkHsaoJBCK6ElNGkSXEAwlQ2Cyynv08pUKUQMj
+z9fChFhlkispyBOM8YRETvMufqgDQiYBjgFt5lxPWEUdRgjJ1BnOlA/E2LnKyQsL1OGX72vlJKqC
+kDv5DUopqIM004mQJ1QSdAJRAwDg+QR74rOB6VxnOxmSz3TCRJoJMYb+OIF5jZRYJQUSzYpVLIBM
+am7ULOw8CBX6eQ9wSlJYq6CCRL/Z0HGu1JwLQae1UqDNhNIFAMa4JyxJKs9zysYq+TxINrOJEGP0
+kxdUsAAmWfoSmbrHWvk8lxqWelFlJsUgT6iDRTma1aOsApn7LOITwDEJbgorBYFxnE+RSs9OWsuR
+WKUlTe9BBSDglJM6dSlPe4jWolZ0lrzwKkLUIFG95rOtooynJN0aKNAZwwI1NCoI63BUq6gBsqCj
+LD/rapUnyDKypFRDCuz5GW9WchXSHG0dYFKRVcBTq611iTUFYgEqDKWsY2VqYg9bSrje9a3LtFw5
+C/LPUDqVpzsdCjL+0erIHoKUrr1Nal2ZqlvaKsQYrB0hSvNiz5ailhfXqINBqvtDZhrEKsYAwhOe
+AELH1IGRfpilMUq7WUbG9BqjrcgkSOla/a7Eo0BgbVyR2tKFrJO179tlWlGZ35f6dqZ1HShx5Zng
+VmoSdGidxGx5MYlrBvitqGyugBtcFVQe1a4P/GU5TWkV9uK2u+M1Z2ExSZCGFsSRDf0nLyIrEEdW
+RK/79fFCUlBaAEjUqry0LS3BAY4WohW4xpXuQWDM0rJQYRUQzimEAmOBIXNYICDUZCiVW8qjDpat
+W45ubr254SuXBcUxsco1VgGOOuBSnVQAhyzJm+d0OjLABeklK6H+xGYb/pjQ/owshv+cF3TWocBn
+frJanavUM5fln4Kap5Pr6tMoU1kgQ0UIEJZC5gFF1Z255XJZBA3LOwm0Dv8soouDa2ZTppPGhgMH
+iXc8EDUXmtcISXKj6XouKgA7xI/GNF0POunABLPE0GVwTn2aAgwLRMNkmYQ0NSzYgm4m2Yalqzfn
+KlTr8pguKTYIdwMFDldnGAChdLF50ateWoM3vqsgJX3t+5L89prf1cItrT0szGIfdpXM9DAxESpl
+2aj3yhM+8J3AEWpUxrTRjjyxl+lsp4lrvJLF9DbHb6nSlyAz1Zi0ih8w3sPQDhWgLoYmBFcRk3n7
+VZYAOO9clJL+giL6t98997lDrkHqutyjoSJFilVF/nOl/7zKg4k4zTVaFNAuneorOaIFSSwYIFqQ
+qFy7egWz3pJrdB0tQCRt0lsS9aqvne1td/vb4R53uc+d7nW3+93xnne9F1KJffd72PG3db8PXogQ
+rZ/gCZ94HEIRgop3PAwHOD+CkPDxlS8hC304ectvnoM1ZDzZ6xd59yXwdaRHnek9t8DQg35+omcf
+6i8H+8fJ/nCqbz3r3ed6EU619M3sPe9RZ/vc91MSrzD+8ZGffOUvn/nNd/7zoR/942NV9wiEEiaw
+n33tb5/73ff+98EffvGPX/vaOz2UpJ9+9a+f/dK/QfkcmJ3+YlSM/scCg1lxv3u9dKxj1KL93wqD
+DepvABGjMYSPfeSPABXQK+5PkvLP+gJjV/ivYfzP984vMARwATUwJAxw0PAnATcwBDuiATPpAZEH
+SiRwAgumAoHPcwJQBGFQIzrw8w5i/mIwBknwgUzw9/ZPBVfQ/FwQSjLwBkVwBp8oO7qgB5RwCZmw
+CZ3wCaEwCqVwCqmwCpeQEBww86DkAtqhC73wC8EwDMVwDMmwDM3wDNGwCy8ACGMPSpDBCuEwDuVw
+DquQEuCPf7IjH2SHdGYB/7QwMKSEdQTxa1zHgQrjBfZwdGjHifIwETenD7PQEKEkEAexEq+kEPnn
+EB1Rcxb+sYkacRMVBxJL8A8PghIt8RRnBBP1RxNBcXA6kYk+sRXlRhR1kBQFwhRRMRddRBXxhxVl
+MW5e0YeyIw9EoRiN8RiRMRmVcRmZsRmd8RmhsRgFAQIiMROhpACAIRu1cRu5sRu98RvBMRzFcRzJ
+MRsLgA1nD0o0IBrZsR3d8R2hUQPuUID6yQaJMARzsPpOMAJ9kGFY0BZ5YQjvUQONkBHrcSDx0Q8l
+kR/7kWD+cSEPQiARkgAL0hMPciIXMB938AJ7sCHb5SGtEQMxcgErEhb7aQOIIyVVciVZcjjgQACq
+cRWhBBSkoyZt8iZXAxTQ8XAK4w5a8ieBMiiDwzjoxyD+D6ISFCQplXIpyyMDYHIUIVIgKKA/qLIq
+rfIq+YMCdhIAoWQJmPIrwVIpGWAeP7Cf9PAX44YW9ZEHb1EX3ZJvttJufBEtsSYY488s6VJt1HIj
+gxAQ3/IvV4QXCQhKEDEv65IsV+8gztIw/WQvARIXAdMtBVPyCJMxr8Yu8bCfuqADOLMzPfMzQTM0
+RXM0SbM0TfM0OTMXqBEqQ/IgeGAcYDM2ZXM2abM2bfM2cTM3dXM3YZMH4tJtCoMTUHM4ibM4jfM0
+3QAxb68GR1IBNRIgU9AjtwUkZVIkm3MAS1IYL/I66e85o5IXolM6pYU6e1EIubP+svMumfM8K8Y7
+W1P+IMJTPH2FPAfTOtnTX9IzM9fzPvvFPauzI+UzWuiTMu2TP8klP+nxIIbgOBm0QR3UNLGQNf9T
+IKCBNy30QjE0Q3cTGn6zbAojFx40REW0QZlAOYdPMS2zMRXyPaMkMl10MkevMlOUTzAzQQViMWcU
+TRzzOyHTRVERRl9PRnMUTWq0LFF0SHV0RSe0RX30L4FU/wSiMJEUTIo0MW90SsNkR1m0R5u0Ep8U
+Ag9CSrF0bUwUAftpDyQgTdV0Tdm0Td30TeE0TuV0Tuk0TRFhNWvxO3VhBfi0T/30TwE1UAV1UAm1
+UA31UPlUFzqUawpDEer0USE1UiWVTuWxKC1yPw3+dFz8szwZMkDHc1Gp5gUz9UDLNH1AcFTFZVPr
+E0A9lVcGNEYLFFWPBUGNVCDsUVbtT0k5lVVb9TJeNUhjFVcTg1atlBfQdFKRNVmVNU7vNCZ3VSD2
+FFGldVqptVoNVVH3Z0kddVm5tVuRtVKrhQavdEyVREuXlEu7VBC/dB/DlFyVpEqXc1zd9UjM9VmZ
+NF1zcV3ZkhfEdF59BF5PVF791UfqdVXbEl/zFVSRZi4HlkcA1kyPtGF7pGAJtBQRNmGz1V77VWI7
+5GFNtZ8WdERFdmQh1FkNlhcqVENVdmVZFjc5NGNPFkRJdmZpljNL1FJNElOFNTFUtWLhs1cFVGH+
+aUZUd1YxiDVeeeFWizYsehZWeRVop0VoQYZol1ZZStV8TrVqwaJpgfVpoRYufhVKA1JrC/Bqaydr
+ybYruFZs4/NrwVZqM4Zq05YkjjZgeeEcYiFv9XZv+bZv/fZvATdwBXdwCTdvyQBP15IjBYIHkqBx
+HfdxITdyJXdyKbdyLfdyMbdxfRNmfZYX2KFwQTd0RXd0CTc5cVY7I5ZjPYRinfZgL9YS9VVx+VV1
+HdZsXycWaZdDWLdrXfd1BzF2+7Jdc7djbRd1cHd4M2R3xRZdfTdvgLcNA2NjkddCPBZr+wkpwzJ7
+tbcpnzJPWXQqsTJ8xXd880MrObd1ecErt3f+fdmXO8bydNVTIFBSKOm3fn/yJU22c2kSJ/m3f2tS
+J8+Xd3nBJ+23gA14KIvXc9B2bkVibcH0Z93WV+E2YuSWgTkwgS9ngS34IxyYXSE4gvsibB94bDdY
+LDD4cTS4hDmig/e1bUFYKkTYg0lYhRnjhA9nGOExh3V4h51xGvMXfbGxHIV4iIm4iMfxHANYbNeR
+h5m4iXMYXA/wY1N3ei9EeUeYeZsXbJ43HaOXijWkes8WL70YQ6xYhrE4i+dki3lSSMe4QsD4dsW4
+jSukjPf1jNE4TtSYK7tYjt3Yhv/meOWYjmXXju/4Eic4YRhWjt/YeDWTDh35kSGZCiPUe5f+lAvT
+8JIxOZM1+QzXMIlH+A0jOZRF2ZHtEH7101ZpOCRYWHZd+IWhIob3VSJTeSPqFmJReZY9YpWD94Nd
++S1gWXZlGZf/xZRtNGmFeQR19WRbuZeB4pd3eYaPOSNqWYpvOZozQpeh12uZuZkPOWAq+Jin2XoP
+Am9Jt5zN+ZwD93B/WIAZN3Pd+Z3hOZ4vd3P7x14/F53xOZ/L2XTD9QjjmI/dQZCfmZALuUryWC7Z
+mI8XWYH/mY8FOpt7t6Cdt5vzJZHbeKEzuKEDOZk7l6AlOhUpOl4seowxGoX7aRDaN6W11ynXWWwN
+gHxhOqbF1wBCGl0KQ31VOqeXcgf82G7+smN+DziohfoM8FdC7XV//TeplVo1ALieT5aAhzqq7Zco
++9koq9mapwCbuVibt9lgavpbvlmYwzmMdTaatXqNO7Wro8KZIRqarXms4bisj/ms9Zir1Xon2Hqr
+BSKYxbqn3QYJPSCwBXuwCbuwDfuwETuxFXuxGVuwEZcv25oZYGCyKbuyLfuyMTuzNXuzObuzPXuy
+meGrr6UwhKCxTfu0UTu1GRsQ/LpsALmNH1qv7/WjW0e0m2Wkvbikb1ijYZuj0dejaZtObHtYcJuK
+dfuPeXuMYxutLTa4a9uTZVh6Sbq1uea1ldu3BRi4nbtFDho4E1qRqZtqskMZ8qG8zfv+vNE7vdV7
+vdm7vd37veHbvCEpcZ/ZBVrgvvE7v/V7v/m7v/37vwE8wAX8vl1guHGlMCohvhV8wRm8weE7CsIb
+aeiboQFySS0cf6JYnFH3Oy/8ZP3HA4v1lFm0wzv3wxkvgjgvxTFowtOR8lT8xVfIAoPQxWFcxT3v
+iWo8xyUI8A5Px3Pc8OYH8Xw8xfeuyI38yJE8yZV8yZm8yZ38yaE8yqV8yqm8yq38yrE8y7V8y7m8
+y738y8E8zMV8zMm8zM38zNEcInLsINZJnyoMxO1HwoBLzsnJlRIuIVgNANhrxlYJyr4JglIA7UTM
+koDgGhKNxdP8y1Mg3ARikbbpw37+qOZujiHwpcmeC9k8iiFMSqKuAQgUDGO8axUkirKmLamugYSa
+LdFVHbAAoKH2qZ2sqdxsLb5QndIhxtIjzdRiqiGgJMz8xrz0KawGzr1SfdWN/dYEArZ07NZknbqK
+btAqfbdyvbmiLCH2/CSkCV/+CptK/cmSfd9AzNiNfdEFYhX6qbrazCF23dYV7tJPzXLWaYR0ruFM
+DdLpauxETsbFHcz/SZpa7SXmKt0XgtVOp88RjMK47N0hR9oAgOTo3N3JYsSKfd8T3aj8QKZEiqDs
+XcOMgcXoHaei/bmqvSHcq4e0va9+Sui+7ZsmnuLRfBIWCXSCaZfQKqamKuTDHdL+82ndXSrf82wh
+gL3T7uHpSq259N3lu9yR1I2lfGrbk6ndpz3Aug3oO96vTMrZGmnF2O2mih7cWh7pzdzOSu3PjCHR
+eP3WaarPyR7kPG7g/1zrTwmVKgLOwKmmkN3ACN3nwX7v9UcNiI3vAT/wBf+OUuCCgPwsvo6CeLwo
+MGjwHf/xIT/yJX/yKb/yLf/yMT/zNZ8zQKvzPf/zQT/0RX/0Sb/0Tf/0Ub+ifGjsUr/1Xf/1YR/2
+Pf71Yr/2bf/2YZ/xCm73eb/3ff/3gT/4hV/utXD4jf/4kT/5g78FL2fmlf/5oT/6f19cR9xeSdx9
+Mrz54dxur1+Au9+Ftn97wp/+mqvfw60fw8c/9dKfrAViAsrh/eE//uV//um//u3//vE///Uf/g18
+VQojEgBCmsCBBAsaPIgwocKFDBsKjMQr4j0A9yJavIgxo8aNHDt6/AjSYwoAFp+UO4kypcqVLFu6
+fAkzpkyUEyyODIkzp86dPDUCSGHRwayhRIsaPYo0qdKlTJs6HbrE4sSKPatavRpyqkVuqrp6/Qo2
+rNixZMuaPYu2KzepFLG6ffv2psQMT+vavYvXqQObJOH6/Vv1Z1B3hAsbPow4seLFjBs7fkz4BVuq
+gCtbzqg1IrFenDt7/gw6tOjRpEubPs2Z2OTLrFnL5XVvFuTZtGvbfrw34uv+1rwtC47o4Lbw4cQb
+S5bYtrdyt5l5bUYNPbr06aZVI6e8PDvP17GLe/8+PDev3drL8/zNKzj49eyNrzYPH2Tz59Tr278/
+2jrs5PH7b+QuW3sCDkiYeOT5h2BG6O1gSoMOPghhhBJOSGGFFl6IYYMIvJdgh83Vs0uIIo5IYokm
+nohiiiquyGKI9XDYIYKvEZJhjTbeiGOGO/AVY48WoacegUKCd9x+2PkI33z4Lcmkffo1hyR8AA5J
+pXcG9hVlgkBWyaVwRUKZpXZKNklmmaU9yV+Y2k3ZZZuzXakmglu6Sad718VZ3phm7slnL2geiSdv
+bNZJKGJwBgrfnIUuGhn+jIi2pmefkjL556PKDcpooYdamh16wuQIaqiiWsiJo5xW1pwsi6zKaquu
+vgprrLLOSmuttq4qi6mn/vUaBAiMCmywoQrD467KKZopoV+maexfkU4KbX2VNlsZpsnSuSm1lyF7
+rZvLAqotVs9GSy5004YLl7Xddpktun9xuy6X37oL17jl3kvaufRepW68VLa7r1vonZJXwQYfzFRU
+dwZ8VXNxyAFxxBJPTHHFFl+MccYabwxxHLoynNNrAtCFcMkmF3xKsSALDFRElrwBc8wyz0xzzTbf
+jHPOOu8MsyYfrywffxSkRXTRRh+NFgU/Ay0SlgLQw3PUUk9N9c6WqMz+dGAtp+evt0tnvZG9+I79
+mb5gg9Rv1wQCfDZO8KpN4LxtZ8UffWTfXfbXc6vcHdxVsr23R2/73Z7cgXckNt5jm314RmkTvh7g
+jfu0dRFmXI555ppvznnnnn8OeuiiX86O3oE390gAqq/Oeuuuvw577LLPTnvtqj9i+t69cjF6777/
+DrzoRWA9eUeDQ05k7nMnrvi9jBevG5Z9Iz+g5ND/uHWQ1BeufNvMN0/u89A/vj1x1l/Py/HlD2c4
++gs7B37z4hdP/vq3nX+9+vbb1r7738c/qflNrn77ow3+oIceEsxhgQxsoAMfCMEISnCCFKygBRdo
+j+6drTlYmIYHPwj+whCKcIQkLKEJT4jCFHoQCxoE24wuCMMYynCGFyQB8dx3Ef0VcDb9Q9//ANgn
+ATaOgDvEzQ1xGBEdFtExPbzeD4G4JyEejohLZMwBi6fEKi6midB7IhTLJMXAUVGLibni5LJIRsRw
+sXhe/GKTwqg76QUojbUxY+PQA4Vg6HGPfOyjH/8IyEAKcpCELKQeR9DCrKXqCIxspCMfCclISnKS
+lKykJS/JyFy9D4e9UoIhPwnKUIqykFA4IhLRSMfCrHFybXTjkuA4tzGmskCmxCEqZ7nKxrXSlfeB
+ZdtkOUs7Hu6Wqczl4XbJS2klkmnATKUwAzewk0lzmk1RmJGQ+L7+h3Fsm9zspjc15rFNuk9kJKOm
+Oc85i5RFD5sK2trLqgbPeMoTZz4Tpw+FhrR86nOfZlGaPa8nMqjNc6AEhefV1snOHGZvlrQx5unq
+lszwLRNozaTjM/dGTDo6dG/IjKh0fHm2iqbxonPLaBo3ujyIejSAE12ZSMlI0rahJxEmqKlNb4rT
+nOp0pzztqU9/CtSaluqfXeQPC8KB1KQqdalMbapTnwrVqEp1qkhlQUtB1qs+BHWrXO2qV4GaiFq6
+Dz2eKIVZz4rWtKp1rWxtq1vfCte4mvUSV2VYc6owhbzqda987atf/wrYwAp2sITNaxXqGjDu4EOu
+jG2sYx8bV0/+iBV9ZIWsZS+L2bfSlahs5A9eCwva0Ip2tIM9LGcHKL3FZna1rLWsZBGa0CRurayt
+ra1tNYvYfd2VtLztrW8Fa9prYlOxty2ucc/62vFgKbaVPa5za7tZ4SJxt7+trnV5G1wwoY+4z+1u
+ZpN7IGyihxEgKK95z4ve9Kp3vextr3vfC9/yLiO39GqOOtKB3/zqd7/87a9//wvgAAt4wPhVB33d
+NaP4KnjBDG5wfBkx2fzN1rsUtmx0tetEz153wxwu7YHRxd0Ki1iu4F1uQps74hS79cLMuidlPtvh
+GMt4CtltMUBTq+Ics7XEscWeRWir4yDP9cPhou6Mj3zdGoP+a3w4FrKQedzj9E3YyUFm8ZI7+2Ik
+a7m6SmZniKmsYij3GD0JmIeZz4zmNKt5zWxus5vfDOc4mxkHRNZWc+yAhzzrec987rOf/wzoQAt6
+0ITOsx3qTK1epULOjG60ox8d5wREGIFTBrOKrcxOI29506Lt8nCbbOkUi5m5lQ61iDGNTU1zetUe
+Pu0QQW3qCo/6xKWOtXdRPV0Ns3rXwEV0s75s6+7Omp1khrSxj43sN9PZ1cfkTzzYAO1oS3va1K62
+ta+N7Wxre9vQjoevjaXoZIt73MeWNGxJ/eNgVxjXOFQ1r9+tV08jEdjqPu6wxVvrehuX3f7TNbz/
+bdhv74r+3vq+7b1Pme+C25bfLrYIjAEOb3lzEtYKN/iksZjwirOW4RnOMsT/LfFxUlzjrT24LbdG
+XgerfOUsb+98mf1QyqAjDTSvuc1vjvOc63znPO+5z39Oc3QI/FQJbrnRj75yCJ+b1ukm+W05XlSP
+f/zdId/uyJ3+3YufMeNYt/DQOeXuqXO66jeWimq7zlqTj5XraHcs1LHscLFT/euWInjbH6t2yrL9
+7nJ9Oyv9LfdVk53JZud71pdO7K1xgACMb7zjHw/5yEt+8pSvvOUvz/ha0P1RzXkHOj4P+tCLfvSk
+L73pT4/61Kv+8+/YPKJ69QfMy372tK/95Tmg9Tvu3fD+uIU5RwEf+E0Pnn5X5z2Jcz/M3RufrX7X
+JfCDr+Xho7bwy8c78qGp/OqntfnNljr0tyz9V1Nf+4zNu4QtogB8qH/97G+/+98P//jLf/70r7/6
+C+H6QDXHG2Dov///D4ABKIADSIAFaIAHiID95w35hyciwwr2B4ERKIETWH8KcH0YtTWOkAUbyIEd
+6IEfCIIhKIIjSIIlaIIb6AMMGCfNIQ5n4IIvCIMxKIMzSIM1aIM3iIM56ILioIJqIjLdcIJBKIRD
+SIQm6AgXWFLZR35D5nsp5X3fh2ThN0XFt4RrZX6U1nRVCFfcF3NxB4Xg14NhYndamFZXiHFZSIZt
+xYX+v/eEXyhjUihGVJiGZmWGW2cRw9AGeaiHe8iHfeiHfwiIgSiIg0iIeUgHYZglzQEPZcCIjeiI
+jwiJkSiJk0iJlWiJl8iI8ICIUdIrD1CInwiKoSiKhDgMSChTSriEa+iEXuiGRwaHcTR+c2iFpng2
+KCaLaqWK3vN8rchhrxhLcjiHdah7aHiLaJWLG7SLvJhkm4gkYyiLwph8xFiMTChd7ZaMyshlzOgj
+zhiMtAg26PEBkCCO40iO5WiO54iO6aiO68iO7SiOGKCNPdIcRlAM9WiP94iP+aiP+8iP/eiP/wiQ
+9WgE8Rgjr6EG7oiQCamQC+mOH+CNWYMe1nhlfzeTkc5XkVOYUOGFcJlmY1HHkRcZhxlpYon3kSWZ
+ah1JfCIZZeljDCngki8JkzEpkzNJkzVpkzeJkzlpk6uAkn+3CjoJlEEplENJlC7JkyAZR0WplEvJ
+lEFpDCMpXgAglVNJlVVplVeJlVmplVvJlV3ZlUiZUl4plmNJlmVpllUJlr90lmvJlm1plisJl3Ep
+l3O5NwEBADs=

linux-imx/Documentation/DocBook/media/fieldseq_tb.gif.b64

diff --git a/linux-imx/Documentation/DocBook/media/fieldseq_tb.gif.b64 b/linux-imx/Documentation/DocBook/media/fieldseq_tb.gif.b64
new file mode 100644
index 0000000..7b4c176
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/fieldseq_tb.gif.b64
@@ -0,0 +1,445 @@
+R0lGODlhdQKaAucAAAAAAElJDK+vr1YMDBUVZC8kDQAAVkYQEBcHOwYGSCEJHSAgaKOjoys8DDMz
+CgAYGp+fn19fFJmZmQoKO10wMA0VIAAAcDsICCsMDAcMT1MMD2ZmAAcSO29ISFUHByIAGoiIAA4H
+T0pKDJaFhXd3d0EgABoaVGYyAC4AKXd3ODs7BwAAN1MAKQAAYlZGB2JlDBwcWWBtYCA3ABAQTQAA
+ZQ0VQD4AAFVVVUhjSCQMJQAAfBMHMkQgIEtLSzAyDD5VPmZmDEZRB2FhEWZiDFo2ETkdCwAAVEUt
+Gu7u7js7Ozc3N3d3WACPADU1NTMzMyBRIDgAAEJCEHEAAEwNDZeXAABpAEQFBSMjIxgNQDooCBA9
+EEhIbwBVAAw/DAwMPgBNAENDCgc9B8zMzABDAD4MDAwOKjwKCkQWKUscHAAAcUtLFRMTEwohCoqK
+AA0NTBEREQgfCBUqIgApADIAAA4ULzg+DEEfH3wAAAcHSaqqqlkcHDgMDKSkpFQAABUVRjEwCGZm
+B00QEDAwXSUMJGUAAJaWlhQUUnx8jVQaGgcGLggSGy8GBmw4OGNAL4qKioiIiGIAAEsHB3JYWHd3
+AAAAPlctLYQyAGggIBgAGkIVFQwcJRgYSA8MU9EAAAcHVQAALRoaYbu7AEY1H2ZmZlxdEHAAAD82
+DlhqWExGHgwOUzMzDAAAmgA5KTEHB2ZmPlpaB///////ACISRExUDTJPJUQrDAwMVhISSEhISHd3
+IC4xCjhcOA4ORERERBkVXElJAG5gYFhYcnt1ZkgGBlYAAAUFMTg4ODo3BTJrAFESEmZmMF5jBwoG
+Q1paDUkKChxGHN3d3RwYRGZmHCgoKFMAACYmJi4YLhQ+FCIiIhU0FT0AKR4eHmVeBw04DRAsEAwu
+DAc2BwoqCgAAPFdMDQAA0WAqKgwiDEgZGRkQRAckBxsTPDEwDBAQEDwAAEJGDAAAU0FBQEJCDLu7
+u2IYGJoAABgYRjg4bAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAALAALAAAAAB1ApoC
+AAj+AGEJHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq3Mixo8ePIEOKHEmypMmTKFOqXMmypcuX
+MGOelAegpk0AJFrSrLhTpYQ3AHoeDFpQqMCfQQHIXEh0olGBYkZtpGkTW56B0EYBfTMKCUEJEqja
+7DpQDIAbBJsOJHF1qdu3cOOqVKtTKcWnEOnmlQALWk6Eep8C4Ou3YWC7JUlAg9VUL0K8vcRMRUwC
+gFdoXBdD6+WE4A0kQqE5kSqwsuWBepFg8yq3tevXsPPKg4n3YW2HjnHPZrp7oODehoHDui2ysfDH
+iKFi42iU6A20A5G84SsQrdE8iKdPR3181KPY4MP+NySBC4L4lHRJAI0MSwwJ0++B5nSvHqdAJPVv
+LHb/U54YJzX99RR+QOnX3ntKidELANiMYlce2DB4FX9vHMdYTfIQeNZ+8dlHkFg9QSihQEQpyKCD
+H9q0E4X+AfhGTir6ZhMskWGTU33Y8EWffFC5OB+CONX3V1BixVgfe7DgWFlB7621nmRMAjBdLwk1
+Bw0SAEBZ1mKw5PHddQ9aNgp0jB0nQWfnpanmDTVNU56aI6lFghOLkbAcTVJh9xl28uCJBDQ2Jkkn
+EqN0Js8bvWTYy3dmzfbUnFcWOhxXsznxmWhKHeooANAcmihrBhEFKaGGAtAVoH9xN1ymFa66GFH+
+lv4JYEFE7eRphi/21ephJDqRR6fY1MlqnlnCkitmfZra5VlI8Fnms89CmuRy6jkKVEGLlkbntEwG
+CwuKyK2VE3HfLhaapQKNuSxrjpkF50Sg9SnvvPTWa++9+Oar77789lsvPDcBsE0Tqb67kVpWDVSh
+UMbRxKUEy23XV5YOFwRNrckZS93FYlRs1sNKjZLqDSRUnBBREnNsMsS0bvrtyDD6x+lRGWPsqkCZ
+pSVcT4MZtCRN7M6Ws0AM70bU0UbPljDO8uQ4kAQ177a0scA5TWKVAQ8mVJECUbnqTZ/h3NYb30Hb
+ssEQFZn12my37fbbcMct99xxo62RWlknq2r+mVsrhbfeRzmBDZsu68xdT33TGHDJGYc629+JG77T
+gjfFHLmqtiKWFTZv3CAZr9CKcQOiC66q6uadd4yYcc+ynrdav5EYMHAIYx2dVljunGnZtWF3E5q5
+5Wb3QfH6a/zxyCev/LwAB3xFEoUMnxHCuu9N5Myw/KSxQCrbZRaUNhOUMsV2XQzyy0U1fvb4qj/8
+xtk7iey4+TTDn2njBJpNtF1N5Wp60QQhEABb97ikwQIbwrFa9qImEAQmRGKMsZ2MaESmdCmFBFCq
+zShIs6xXWUh40gthStgEAHZYSksitIictvWIN4BmdUnzE6oEFalSQaVYjwDAVR41KEkJpRf+l5qV
+piYFuOEUjESzGZUPTfWnQEmOVdYqIAVlxcDMKewvdtKf6aBFtr4s6IWq8p+dBog0xrRFVCx0YbWG
+EyFslU1aLfRKyaa1GHDNMUW3QwtmDOSXa3ltiwF8Q1tw9p12qS+FiCxJoTyXyOkBpz5OkAwZk1Uf
+smgobEI5UmUeMaD8eEUoSFjQlI4SIadlsnEAEsMlP4kToJDliaRkEHWIEkopSeCPSPwfYvIAoLNI
+JpUEwcz7mgIxBqmnQjDsUi89N8lniRIWwIQklKSJyyRxUJokygmhbMm/I6otbH3RijFp5J4JFkR7
+BJFU3rJXwUa6UySgemddxHPEhZBLnij+AVRDVEm097XmBtTBp0AHOrx7ukUeZXOIQQk6klFYqCBj
+QgISbsBBuOiToRjNaHgWCieOarQjhVnIRGsCzriE5aMoTalKV8rSlrr0pTCNqUxnStOa2vSmOM2p
+TnfK05769KdADapQh0rUohr1qEhNqlKXipARSOKpUI2qVKdK1apa9apYzapWocolgxwiGGANq1jH
+StaymvWsaE2rWtca1oTE4BRwjatc50rXutr1rnjNq173CtcYJEQYSwisYAdL2MIa9rCITaxiF8vY
+wAojIVuNrGQnS9mtAgMh0GCrZjfL2c6y9RAOYUQnRkva0pr2tKhNrWpXy9rWuna09Hj+6ALIQdva
+2va2uM2tbnfL29769re0bUFCnsCE4hr3uMhNrnKXy9zmOve50C3uExKSi1hY97rYza52t8vd7nr3
+u+ANr3VzkRBIvPa86E2vel17icesArjwja985/vbBYR2vfjNr35ZG1uEzJa+AA6wgHkrXIQQN7oI
+TrCCF/zc6SKkuuKNsIQnTGHwkhch5t2vhjeM3/YeRB7vHbCIRwxg+zZEtBxOsYr5K1sSu/jFvi3w
+QQ7M4Brb+MbMdfBBIFzhHvv4x9298EEyvOIiG7kTHjYIiGHM5CbX1sQMQfGRp8zh/h7kv07OMoll
+bBAa4/jLYF6wjg3CYyCb+cwUFrL+QYhM5TbnN8lFCbGW5yxgKC/EDlPIs573zOc++/nPgA60oAdN
+aD3zASF+cIOiF83oRjv60ZCOtKQnTelKK9oLCfFGNzbN6U57+tOgDrWoR03qUpt6095ISBSawepW
+u/rVsI61rGdN61rb+tasjkJCzFDoXvv618Am9B4QwgdLG/vYyE62pf1wXzc7e71WNgiW6Uxt+XK5
+IF4Os7a3vdwxF6TMaA63uLmr5oKw+dnobi2cPyTnaru7vs1Ot7xXG+2CTPvd+NbttQmSbW77m9ve
+Jgi4x03wcZebIOeet8JJu27ftDvfELetnRUi5YVbvBP1Jsi9Ix7xfQ+k3/8O+Zf+Az6QgRf85GY+
++EASfnF5N5xoD+c4xCeekIq3fN4ZH8jGZY5vjwsE5CIPOoNJLhCTo/zoFVa5QFh+82e/fDgx5/m7
+aY4QHgzg6ljPuta3zvWue/3rYA+72K/uDAYgpB5eSLva1872trv97XCPu9znTve0JyIh5uiC3vfO
+9777/e+AD7zgB0/4wuvdHAlRBRAWz/jGO/7xkI+85CdP+cpbfvGqSEgrxs75znv+82LHAEIYMIG6
+m/70qE893esR76bLO+cC2bnUq+1zWABd6LiPLtFhYXSk+168SocF013f5qcvefYzbz3xnw17WMge
++XOu/e1zT/0cU/f32E9zeZf+73L3Qj/fVD+Izbnf5uY///tOln7116/762f//eEN/vDJX2TjRx39
+WQ6/QcpBj/77//8AGIACOIAEWIAGeIAI2H+lIAAIYQJp8IAQGIESOIEUWIEWeIEYmIEa+ICUkBDZ
+8AUgGIIiOIIkWIImeIIomIIquIIgmA0JoQZtEIMyOIM0WIM2eIM4mIM6uIM8GINqkBB9kIBCOIRE
+WIQImAwIIQDvsIFM2IRO+IQaaAIOUQlSUIVWeIVYmIVauIVc2IVe+IVgWIXUwIAHAQqrcIZomIZq
+uIZs2IZu+IZwGIdyeIZGkBDXUAV4mId6uId82Id++IeAGIiCOIh4eA0JEQH+oZCIiriIjNiIjviI
+kBiJkjiJlJiIEZAQNhCGmriJnNiJYJgJSWgBcziKpFiKpiiHoKB89Ddl5od/7qZ+7BeL1vdg8FeL
+3iV/q+hs9ueK1aZ/BTF+uVhkrciLdAaLsniMx7V7vWeL8IeLwUhlu0iMc+aLBAGMz5hiwyiNWWaM
+yIiMysiM4IhdzniNRhaN2uhk1DgQaBAJ7NiO7viO8BiP8jiP9FiP9niP7DgMZncQt+AJ/viPABmQ
+AjmQBFmQBnmQCJmQ/lgMCREO4PCQEBmREjmRFFmRFnmRGJmRGvmQ4ZAQYPAKIBmSIjmSJFmSJnmS
+KJmSKrmSIAkGCWEF+Bj+kzI5kzR5j8N2EAyQAAq5kzzZkz6ZkLegiuRYZS12juk3XN2YlN8YjuE4
+jkOpYuZolDCWjgJhjU+pX9kolS/GjUkZi0vJlMzolFe5YVGplSRGlbBglWMJbUVpli7GlV25fl8J
+lrUolmupX2XplgOGlmp5l+iVlXo5YHAZl9Q3l3T5fnbpl+uVl4FZYg6RCTUZmZI5mfZ4aAcxAz+Z
+mZq5mQeZAAnxDWEQmqI5mqRZmqZ5mqiZmqq5mqwZmt+QECIACLI5m7RZm7Z5m7iZm7q5m7zZm7Ip
+AglxAZQ5nMQpmTdpEHzAmcq5nJs5A0KpmOkFmI0JYINJmLhnmIeJfYn+CZ3oxZjTKV98yZ1Y2Zbf
+SZ1IaZ3sh53Z6XvbKZ7s5X3lGWDh6Z5s6V/xGWDViZ4ip57reXTtSZ+r5Z336VvzCaB/SZ4DCl/5
+qZ//xp/9eXL/aaCoJaAJultoeQ6QkKEauqEc2qEe+qEgGqIiOqIkmqF9sI8GwQvisKIs2qIu+qIw
+GqMyOqM0WqM2uqKfkBDpMAY82qM++qNAGqRCOqREWqRGeqQ8mg4JoQKT0KRO+qRQGqVSOqVUWqVW
+eqVY2qQqkBBQUKJe+qVgGqYk2gqjtwI3eqZomqZqaqO88JwSmlrSWaG9taAMCnDu96C/F6FvWloU
+Kqe4VaB7ymL26af+wEWndaptDoqnBrd9gapu8EmoBOqmjUpacQqpuGWohwpmiaqo4aanjdqnlkoO
+FyqmpFqqpiqiJ4oQKrqmrNqqrjqjOYoQcCAHtFqrtnqruJqrurqrvNqrvvqrtAoHCfEHv1Csxnqs
+yJqsyrqszNqszvqs0Fqsf8Clp1qt1lqqZIqTZvqq3NqtrNqmJzapgnploTqn55mpQbepnHpmnhqo
+oGqpgCqup1Wp5Rpc54quIaeu6wpk7bqn7wqp8SqvpUWv9Yqp+Gpj+rqvPtavb/qvhBqwAgtbCFqv
+tmWwBzt0d6qwBMewEuqwfoqWHXAJIjuyJFuyJnuyKJuyKruyLNv+siOLQgRhDwswszRbszZ7szib
+szq7szzbsz47szCQELTwBERbtEZ7tEibtEq7tEzbtE77tERLCwmhDLlQtVZ7tVibtVq7tVzbtV77
+tWBbtcqQEHrgsmZ7tmibti1LAQghBj/7tnAbt3L7s/bAVHZ7t3ibt3q7t3zbt377t4AbuII7uIRb
+uIZ7uIibuIq7uIzbuI77uJAbuZI7uZRbuZb7UhCUPf50HwJySIYRMFTCM6ALSDJSFYPkM2szG4Sy
+Fa90ITZRUpcbu7KLESRQQRRFEEtCulBBQrB7NumTS78bvJp7uh+WHHukGaPDJU0hGu00u877vPt0
+GrCAJYOUB9f+orsH1BVI4ATVZDjB6xh4YRRZpBBGAUQF8RzAuyzQu77sqxBWY71YkSN2ARmsQRzg
+yz/HEb7Giz3hch/FQhBm4RVqgR3tW8AGnCTQIT9dw0nz67ncAhj5i79K1jixI0HYS0Dcgy4HvMHP
+G8DGMk3W0cAIIUAnEzD7IzuVg70V3L8XfDQ30QvxxMEybLlOIAEQ0k+sdMIG0UK90FVDEcHpa054
+hBX8W7zR8b9lcRogNMNMLLmPQFFYlDd4MUYMcb9BrMNDXBrLQb7JYb6eAR1L3MRi3LgXgw0wu0UD
+gsQKYcVapMKI8RPEO8HB1DnI+wbK+1BjnMeMKzhG/DU2kSj+WXMyQOy6N+HHNRG6NzE1Fnwf4jQ0
+bazHkBzJkjzJlFzJlnzJNEUCvbDJnIwkInFLnbzJAYXJpFzKpnzKqJzKqrzKrNzKrvzKsBzLsjzL
+tFzLtnzLGhHKurzLvNzLvvzLwBzMwuzLo8xSCjLMyJzMyrzMy3zGKnXMzBzN0jzNyXxTDELN2JzN
+2uwhLkUT3KvN4BzOyAwgePxR3izO6JzOvNxGNsXNLuXOLEUT5axR8gxT9fxSuVtT8MxS+6xS99zN
+YZxR/9xS+UxT/axSB41SAx3PAY1RC71SBT1T3CwMjFDRFn3RGJ3RGr3RHN3RHv3RIG3RXZXQ5qwW
+OLALKJ3+0iq90izd0i790jAd0zI90yiNAzIyzwKtFiG90zzd0z4d0h2wFg7cUtzcl5MabSRNz2ox
+fRd7Yzr20P6sFvMnrkkW0TJV1BGLWkhdT1HdG0zd1DX21A3NUP881ZNa1UPNz6li1I261fa81GDt
+b2KN0w4t1Vl9WmhtzWt916bl1i/1z18d1wo212/dG2b9qUKt1+pYnIzd2Paoj6jB1Sn1z2zQmpZ9
+2Zid2azJBjdd2AMBk44d2qLNjsdp1TGF1XxNqb2R1Dnt1YK9bYT913ad2qOV1+2817SNcast2QoN
+168dZrEN0Iad20iW2Lc9EGwdqH4t3B/328Dd2bI93Ln+bdv6nCpU6InYnd3a3YVjGNmeLRAfyILi
+Pd7kXd4q6IL7Q9dkrRaZuN3u/d7YDYqlkdYrxc38Z4T4nd/6XYAL6N3RPRBaQIgCPuAEXuCDqAXQ
+zdwCEYT73eAOjt9ION+KXZXEvdwtBdjOrakJfuGzTdvUbdC4TdsWztCuneE4FtwcLt0ebtzVjdwV
+vtvfbXsmfuIbTuIrR9wfLtGpgqHX2uM+jqooytp13RuzCqxGfuRInuS+KqzpHeNd+uNQHuUZmq1J
+Qt8IHeKpPeIrheEzjrA1vuUdnto5ftVYztda3tXN3eVh/eVovnQ4zuIg7uK5feaT7dtqLmZsXucq
+Lub+cK7jci7iMP7fP3fnGNvkgi58by7hxy0QeBZsjv7okC5olskYvF3SvaFpp5bpmr7pnF5qqWbo
+Cg4LvBbppF7qjl7aVp5SqA3o/h3qgU3oyIXiNu7m093nZP7nWR7org7rg53nvb3nfD3mp13md03n
+v57mvN5+oJ7iN17rit7iFD7nus7sg57syr4q6k1QZZ3oVT7hsMADZBDu4j7u5F7u5n7u6J7u6r7u
+7B7uZhDkla7UvZF3hlfv9n7v+E54iLfssw4Li9DuAB/wAj/w7C56zx7n0c7q2RTjr27tsg7mwH7X
+wg5Tq57rrU7tMm7t0PXwbY7ozt7ti56WL37x/d7+8MnO8Xre7Ct+8H4uENcN3zAf89xNhpQe4+Ft
+3jif8zp/guiN7THe3jIf9EIvBfIN8tAOC/f94Eq/9PxN80K+3r1xhwY+9VRf9YBoiPwO8QPB4Ezf
+9V5PDxFu9Agv8tJO8lpf7RrvXCh/7LS+8mLf8mSv8DV/6CbP62tv6SrP5yx/6wlv8QtP92nfYL6O
+922v92/P998Oeoq/+IwPdmVn9h1vDt8w+ZRf+ZZ/+Zif+Zq/+Zzf+Z4/+fvu84e+eY1f+qav+AZ/
++MOO62Y+7SUf+Go/+PKe98Fu66vf960P+SmP9rCvXHc/+4Vf+3t/+3Hv93O/673fbbLf2rQv8bb+
+T/HEntXGTvgZn/zJ9fvMH/zOP/zQPxCS8NPgH/7i/9Fa8vTarhY/QNPqv/7s3/4z/QPLP+QDQQHj
+X//2L/7P/1LmT1D7L1BQvfsAAUvgQIIFDR5EmFDhQoYNEcoDIM/hRIoVLV4USAIARo4dPXYEQOLj
+SJIlQ5ZEmbIiRIkqXb48yBLmzJkyad5MqRHnTpgnef4EKRLo0JURiR51aBPp0odGmT4tqBPqVIQA
+epHAmlXrVq5dvX4FG1bs2LA+qT6FOIrsWrZt3b7FOsrpWaZp4d7Fm3dtr410/QIAHFjwYMKFDR9G
+nFjxYsZC/SKFyFjyZMqVLQ9u+fho5MudPX/+pqxZ9GjSpU2fRp1a9WrWrV2/hh1b9mzatW3fxp1b
+927evX3/Bh5c+HDixY0fR55c+XLmzZ0/hx5d+nTq1a1fx55d+3buFN9IICjhDUEkQiFyJNwL1nlY
+6df3JcgZALY8Cgc7yQxt1Jv5JJC8J+yGwoSSwAnAnABPoPkKkiuz7h6EMEKKSLiBoBtGIUgq9ggS
+Q0AAbvivKgcFYm+ugTY8ET7x6hNRICT2+w+aN0aBBhYxnHCiIBMVdHAUJ1jMwwkM2wNADIL4G1FC
+JZdUUgwAQkQCABZhyYM/EuEbCJtRkEDCCfVaLKjEJFG8MkNsEporSol6qXAgJLBxrL0k55L+AJsQ
+XfyuPSccC3JHJv8EVDtsEqxyIGgG7YtMWHoJUdGB/BTTIEVRhAaAGg9K8w0uiyzokRwfnTMzJx4x
+iIQcAXjkTIFGecTPQF+FFToKV3Wsl0fYc3QgElTFdMy+IMWyTIJcldPFUeqbFEs/5wJWTmyMhOWN
+SpOMtVprj3PyvzegnRXXYN0k4Q1qFRxMWMJESlbHcd1LF1SDmPVVTqyoPHXca+/FtzcE81BVHk3f
+E7bTN3q5FMz4fo03TCwrLVjdgVoVI0poH/6Ux3dFJbXTesU4k9Vi8wU55N0euVAojTBTdFd73VXY
+4pZfzojXi4dds00X4aR5ZoHEuxMWJPL+NOpZaT8WuWijY6v0WUkTDVbihpolOsWlB1oRzcweGQ8W
+GWm0EUeHv171R4GCHNIoUz8l9mi11x7NCZmlBjCwXuQDzOqpiSyXbvXko88+wZyYWD/+4Ow5apep
+NhCAUd11MuO02YY8csknp7xyyy/HPPNYSeilc897mRgmCT73PEHNT0c9ddVXZ71111+HPXbZZ6e9
+dttvxz133XeHXB7ffwc+eOGHJ754449HPnnlC08OCeWfhz566acXnnnkoKE+e+23n7460L4HP/zA
+ViaObvHPR38x8oc7OX333y/M+1G4p7/++ltdXziIbrW/f/+hx59zNPI/AhaweHLxXpz+lKOU5TBw
+gY8jjlSaI0HpmKWBEByOA5OjQeRQcDkehI4FH5i/4HDwOCY0DgiTo0LnmEUQC4BhDGU4QxrW0IY3
+xGEOdbhDGNYgRSQEjlJQkQsiFtGIR0RiEpW4RCY20YlPJCIqfihA+MgDBjzEYha1uMUdCkJX33qO
+WRZADjKW0YxnRGMa1bhGNrbRjW8kYwum2Byl5CIWd8RjHvW4Rz720Y9/BGQgBXnHXMyRORKUxyrg
+uEhGNtKRb1zAFxM4kDE+0pKXxCQb5XglIP6mjoMEZShFOUpBFpKTVDyRIjO5SlZaMpIZAWMLHVPJ
+VtbSlpo05AUzY0dS9tKXv/yjKd/+00nfIFKVt0RmMsnxSliwsDlmMUEapDlNalbTmtfEZja1uU1u
+dlOalMjlCAeihjaU05znRGc61blOdrbTne+EZznVEM4VwkcA7/BmPvW5T3520wSSpI5ZQLEKghbU
+oAdFaEIVulCGNtShDyWoEeiJHKVEIBQXxWhGNbpRjnbUox8FaUhFetEITPQ4EhSABSC6Upa21KUP
+BQVApyNGZdbUlpscpnM+CUye9rSXwkRhcYxpU6KukpnOZA5Ni7rUR+I0qOWbCy99OlWqBtOkKazi
+MZm6VUjKtIKz5GpY3ehUDOovqlVFa1rxCNSyBmeoYoVrGo8ay2c65haewGte9br+V7721a9/BWxg
+BTtYvBbjqsVRChhesVjGNtaxj4VsZCU7WcpW1rKLBcNhIwgfBiSAsJ8FbWhFO9hbeDU6So1rauOo
+2QyeVa2vnSpbidmbt6o2tXOdpEBoaVu4knW2vNkpbIX7S9mikkRa5W1YcRtQsCa3t6w16y6HO92f
+QtetWXUuXJc70+Zml6u+1alrqTveQRZ3gtj1Lle3+9WBzGC074VvfAObAOsGcS4iAER+9btf/vbX
+v/8FcIAFPGAC51cE9f2NBPkgXwY3OL4zMG0Iu5vepYKXjuIlb4b9aN5DopfCS13vaSf8YZtamDnB
+1XCK9cjhD3qYxDYNsYQp+eL+oppYlwORqop1HAsWK6e2NFZmjMM4YiDf0sbiFEiOd5ziHtczlUWu
+qZBlORBeiMPKV8ZylrW8ZS532ctfBnOYrfwJBPtGKSqYRJrVvGY2t9nNb4ZznOU8ZzqnWQVlpi1n
+VyBmPvfZz38OMy8iPOQZQzmZR94ghpes4SZ30MWGrqWU61poSN8Uz8BV9KLJ2+iTPrrSRh30lHX7
+aUuf8sLS1TSTL72bH5M6k5JOqmOqDGha19rWXiazqU88lz/8wte/BnawhT1sYhfb2MdGdrJ9/YdV
+60aCDNjzraU9bVoLGpa5hcVuXY1JRFM006meLqex+uRtg/razKV0uS/Z7RP+fhvcwhW3UD2t7kbC
+ejmopXdTm50bFL873PvGTavzzUh7KwffA2cku43Tb3/DG+C3ETjCu3pu7rbXwRfHuGDpq+sbCyQe
+lwV5yEU+csvG4+G2UXDGVb5yvUKY4uwdtcQbqXDEurvhaY33Zskt80UWPDkH53kbaQ5VVN98uDln
+37yDrkafIwfoS1fj0FtbdKPDFunCiTjU0dj04zxd62eUenRxXPWjn7w2Wf96GbluHLNswhZvh3vc
+5T53utfd7nfHe971/nbDchzJsFAFEAQ/eMIX3vCHR3ziFb94xjde8KowO22ejYe9V97yl8e83jcR
+6knHPO1Rj/xsGE72ql7+/bo7//zWOR/rdKfejGEvoc1J31PTAwftn197cbyeetjbl+qzL33oZXP7
+tOeeOGJ8afKVv/yGStTvic6MNEY6fepX3/oilYbwY4NIlTLf+99PvvGHYxYxGND89tM+bJRyfvZz
+L/2vkaDz2j9/6U0MqfdWIPTD+9vdPDXpz7k/g8s/b+M/3fA/sTsvAKQr1ju1/XPABDSumYKfCZzA
+AuQ3CsRA97HAgMvADhSf6tCLEBTBEcyKhlEOaCDBFFRBtzDBDVrBF4TBr+CdGaTBGrTBG8TBHNTB
+HeTBHvTBHwTCIBTCISTCIjTCI0TCJFTCJeSOPKGarHER81jAhWCXXxn+jL35Fr6ZkoRwEpuJGvMJ
+CfNBl/tgEas4GAvhFHK5QryRGyZ0Q9OYlYG4kAxhGoPoEMAAEbt5Gag5w515gy08iJO5E2KZC0dB
+kXD5D8DIGIBxEcDIPxNpqzeUxKfIlkackiqpw4LQEi7xEj3sQz6Em5hZiO9wQsNhGUaEGYuxin9B
+xVRJFZ05nEmURc0YlLGBwkORgEwkCEYJGFiEG1DsRYZJiDx4klGwGULMDEMMFkuREydokw3Zk0oJ
+naiJxFm0xp+IQ7UYCFvxFoXYFU/8xYTpw1M0CGOkkieJxZzpxVBsJseRBydBlr6QRljYE7AxxWvE
+R6SoxG3JiArpxoP+KA9xQZNyYcRzQUV2vEeB+EOFdEeDMR+JoBsnNBtNYQ9PEQissUeDzMeNHIp9
+6Zd/+UeBIRj7SBhgPEhhPAhi/Jt0PEVlJIhRUBWnEBL2SJzA2EJI3ECO1EmOIBltbCbC8J1vURmG
+gBqTPMS3eckhOccaQUaE7MVIsZGQ2AiUpEelpMac3MmspIikmUZGJBOnIcqSFMdQrBqAXMiBeANS
+acp1fEqE+aKNMBWCwEhyrEattEuOcJuYYBrBmBvCAEdz8Uu9iZv5AMTwgMKwYcO6ackqJIhKqQ8T
+MRBYwIZF1BopoUu/vMvM1MzN5MzO9Ewe5BzSAZ2bGB3RNJ3PRM3+1FTN1WTN1nTN14TN2JTN2aTN
+2jwd0cTN3NTN3eTN3vTN3/zNNZgG4CTO4jTO4yROJVgDJUDO5nTO5wRO5WRO6KTO6qRO6bTO7NTO
+4pyGNdjO7wRP3hwWbAjP8jRPAGAH81TP7awGAKiG9YTP6mzP94zP+mzO+bTP/DROdrAK/fTP38QG
+ZRlApzMG53AEAHAEA0VQBU3Q5jCGKdS5RxnQrivQ5jjQBmWOC2VQ53hQBRyWCWW7Cs3QBbVQEh1R
+DF2ODo3A9nCMEZCEF4XRGJXRGaXRGrXRG8XRHNVRGC0YABDRQwiGIBXSISXSIjXSI0XSJFXSJWVS
+IR0IDRWIGDj+hSml0iq10ivF0izV0i3l0i710imNgSc1UWFYgjI10zNF0zRV0zVl0zZ10zeF0zIV
+BjHF0B210zvF0zzdUWAYCBXVmiYF1EAV1EFt0kPwKrNghE5Q1EVl1EZ11EeF1EiV1Eml1EpVVHrI
+DB9tPddbLYGAUlh4AiYQ1VEl1VI11VNF1VRV1VVl1VYV1Seg07EDPpyLVYGABEvF1VzV1V2t1Evo
+U6VLvfVCVF4l1mI11knF1EcRUW3jVHLAqU8NVVeV1mml1mplVVj1VBNVsln1KWH61Fs91nAVV2L1
+VYHw00Rq1jMSVsdI1HF113dF1kxd1nR9vVoFVWvF13zV11X+xVZY+NRt5Vae8lYTBVd4NdiD7YRy
+hYVzRa5mXdeBaFeEldhxTVYFmVd67VR/NdFo3deO9Vhr7dd/Ddjgy1YMLdiJRdliVViGxVgyeliB
+sIMpkNmZpdmatdmbxdmc1dmd5dmenVk+UNaB8AM3INqiNdqjRdqkVdqlZdqmddqnJVovsFdv6Iaq
+tdqrxdqs1dqt5dqu9dqvBduq9QZ7jYJmMNuzRdu0Vdu1Zdu2ddu3hdu4NdsosFcz8Nm7xdu81due
+3YNfHQg+gNrAFdzBJVyo9YNDZdeUVVxirdj2uFiMfdaN/djJpdxrtVeAHVlfGliTXdzOzdWVBVbc
+Q1yI9dz+0qXUxtVUz6PXyMVQjq3c14XdkNXWzI0tez1Z08VdRgVd1EvXl4WFiM3d4O0E1H3c1bVX
+14Xd5P1Y2cVQzKXdUdrcgbhd4TXd3T2ull2m0RUI4KVe0yXeTeVU1h0I5FXe8s1X5pXV5wWm6LXV
+7g1e612PhuVU3+WBAbDf+8Xf/NXf/eXf/vXf/wXgALZfZ2CAoBWIevCCBFbgBWbgBnbgB4bgCJbg
+CabgBE4EezWHLtDgDebgDvbgDwbhEBbhESbhEtZgc7DXwHO8FWbhFnZhxoO8kh2IVhDgGrbhG8bh
+AMYAvxUIBpiACgbiIBbiIabgetDe33Xf3P1e1U1X8RX+CPI13yieVvRNMvUVWNtNYtyFX3RtWd/l
+3ixW3CXONux14nuV4jOmViqGBee14vLCYjD23C2WX9fzYjj2XDFm1vA9XjTmY1dVYzZu40BiX1iY
+XjuWWDnGXt8tB3pg5EZ25EeG5EiW5Emm5Eq25Etm5FIQAAOGhWjqp08G5VDWJnCSYYHIhi9A5VRW
+5VVm5VZ25VeG5ViW5VlG5WywV3KKp1zW5V3m5Xeap1KGhT7A5GEm5mI25ktOBh6GhXsS5WZ2ZlD+
+p5czi0qQgmq25mvG5mzW5m3m5m725m8G52qmhk222IEYKPBD53RuPnu9hipw53eG53iW53mm53q2
+53v+xud8dudrsFeLur5/BuiA/qiSAmYbCOeDRuiEVmhwzgRlTil1huiILqiYkubENeQwllfwdb0y
+huI+9uhR/eNA1tw3vmiUReQuPuIvLmmDxWMy3uOPhulSDWmRJqVBLuSVfteTxtg6xmmJbemW5eiY
+FupXvVyarmmS7mmD1Wl6pV8ycOqnhuqoluqppuqqtuqrxuqsdmozKOByFgi3y7ywFuuxvru+01gM
+NYdvUOu1Zuu2duu3huu4luu5puu6VmsUBuZ1CIC95uu+9uu/BuzAFuzBJuzCNuy9Xgd7XQStZuzG
+duzHzuodNlfOojyytuzLDuvNq2jSTeqD/WnIfen+oYbpmTbqULLpzj7Ype7dlEZtls5oJm7WoBbt
+0S7q0jZtpG5tcVVth2Xt3HbXzzZeYO7o2Y5i0rbtUsJt3zbW3Z7f3lbucAXuJg5t4uZj4z5uQDrt
+5w5X5qbjI86ESADv8Bbv8Sbv8jbv80bv9Fbv9Q5voPVqWHAvlpPvi9u4sx6IbwiD/Nbv/ebv/vbv
+/wbwABfwASfw/P4Ge8WvAlPwBWfwBh+wAwPmC2DvCafwCrfw9e7byf7b+ebwBnO5n/xQztZuY43u
+2J5u6j5j677uDUvuEddV7g5W53ZxXi1xPRZuFO9jFV9xPsruGedVGBfdzd5eH2fc1x5joD5xHDf+
+Xx3f8RVrcSKnVCAvPhmHckut8Y1OciVXXiZv8rV68iqPVCn/Ot89B0gw8zNH8zRX8zVn8zZ38zeH
+8zg38z7oaselMmrD8zwHs1yzb4FIhzEA9EAX9EEn9EI39ENH9ERX9EUH9HSwVzSrs0iX9Emn9Dm7
+M2CGAjnX9E3n9E6P81ZQZmjT81En9SuzNhCXUBEH80q9ct7Lci2P3dru8j7q8VWPcmXm4p2mcluP
+1Fb/PNmG9SWX9Vnfo1rn9TDH9TmOcSFH4mOPV07OYyy/8WAXdmAG5CY3dmd3VDHXOkU+5m8H93Cv
+ZE3mZALQgXNH93RX93Vn93Z393eH93iX93P+NwB71QIuwPd81/d95/d+9/d/B/iAF/iBx3ctsFch
+oIKEV/iFZ/iGd/iHh/iIl/iJp/iEFwJ7FWZx1/iN//Zk1nCBEAAamPeRJ/mSN3l5J4AjpuaFZvmW
+d/luHmdOPmeJpnnwc74+h4V21ued5/me93l85mdg9meBJvqivz6CxnmDfvmlZ3qWb+iPX+buq/mp
+Xz6KRnUFsWhth1RfTztgp/bk5fJZz3atX1RuhzqeJntH5fqv8/qvf92w7/KxT3uzXzq0T3tGXXut
+a3u3p1y4x/Yv13q6Dzrf7YBLMPzDR/zEV/zFZ/zGd/zHh/zIP/yJSV1YsAcuwvzM1/wcggH+e6WF
+JwD90Bf90Sf90jf900f91Ff91Qd9WrBXZYCi2Jf92af9J1IGe9UDydf93ef93o98ClBmMdj84Sd+
+zbeHI04qEV2OT11+E21+FFUOP+2wEG8h5VcO5r9+589+6E8O6W8x6n8m608O7B9/7S9/7kcO7/cx
+ZbmKGHT/F+yP95f/EewBAOiB+cd/vaj/+8///n+L/QcIEgIHEixo8CDChAoXMmyoEBsAhxInUqxo
+cWAvALA2wgLg8SPIkCJHkixp8iTKlCpXsmzp8iXMmDJn0qxp8ybOnDp38uzpUyfHoEKHEi1q9CjS
+pEqXMm3q9CnUqFKnUq1q9SrWrFq3cu3+6vUr2LBix5Ita/Ys2rRq17Jt6/Yt3Lhy59Kta/cu3rx6
+9/Lt6/cv4MCCBxMubPgw4sSKFzNu7Pgx5MiSJ1OubPky5syaN3Pu7Pkz6NCiR5Mubfo06tSqV7Nu
+7fo17NiyyyKRAKsXUtxGe/Ui4URMbjG6gw6/Pfs48uSbSeDGDc1Jr99Ciw9trpQ6x+LYlXPv7t3v
+I9t5SMAab11CHljQqPfmDc34bWjYSMyH5lu6QNuw6NuHJcGJE7bhlgd02Gy03XcJKrigWtDcAMso
+0CBhXXHjTScPLPKMAh+FsIjx4HO3AZedcU4gAQs2E8JiIhJvMPgijDGWZd0N71nn4Q3+5E1Hom4d
+StAbCRqxF9989MlzI4IyKrkkk009MoqAvL3xY4ajnFgdhhqu6GGHYpBXG3w8wvdIiUi02CSaaapZ
+FDQAXHmgcaNA15tQAvF2opwCGafbfen1CCdu/zlB3oDQPRjmmokquiijjTr6aFn2EfQepJVaeimm
+mWq6KaedevopqKGKOiqppZp6KqqpqspWHhtu5ARH+iU51Bu83Vgrb8AVh2svb2bXC67A3aejrQFC
+5QSlEpAJC5izTmergLfZSihxvA1KFK7S7QcgecIByxtzuIoHnRN+ugqhs0ORoJ+DscJ53bTw8Spc
+tdHpGJS3uG407IHWjtgUEgZuNMr+iOkhitS8Pca7q62+clTrtfty65+UQH7bi2383nbuKOnWye6h
+/r2blK0Y71kyosXey1G+vJVHrsHF/stUqxzBulHMTPEqL7SI8urwRhDrSGB06f34LXMXCzvxxhx1
+TJXAYrgqj0aI3qffjiQerN1GWhI13LobSUDtq1A9smyN+9640XPRzTwyoFmPDGV1G6kYtn/3ct31
+DSciccORAqPoMb6Hhtd11cXdACDWWmu999yNE8cR3mPD1+5TN4x4sxiJByUPuW+nDPfoVX5d9n76
+WQ432KoTKjg2hLNsuH7Mwb24sXLHPbnjdJ+eYd/MAn55yE1F7WrncIPudt2P667+m9dZwypP8H9j
+yDrlrt8Gu+xFjZJe2H//6TTqz5MOOYLDcT3czU6FGDDOtheHnnrYDTmk45jzjgTZI0MeIUeg0bHv
+ledpTknRit4jvpF5aSOCc9y7IBcm/cltfWwrHlMsVzN0wY0EwKEg9rbGu4NFMISlG10vCNiq7jnw
+RMjykO3C1EAUNU9MI5wgBrUGQLZtSDcgXAoB8WbA4nhQPTncG/789zvc7FA950Lf5FKYnhVSpWYm
+2g+9SKgiWvEmWrDY2QnTB8HmWEtyTEGWhVS0tqBY6FkuO1kXT0hCXL0BQ1B0HHt6ITUIHekp60LC
+zTw4vqD8sGS6Cpqt5ChG7Nn+ChuiUwr8SJCeR+RhkGxcGSLppLA43lEoEMOGjUbYyT3tcRR9dMof
+b9Y3S16wOomEoyZvuMj78caRULHiiSjJyvhx0WS6mVcYsRUdUCZxlM0p5SmnAsoHyYNsxeEfCYBW
+uiSGaZEorMrZCAaLtK0RR5g8nwjzd0S7wcqYTqOUE3EDq3I+5UPKypAzg4KEUViphiUcYwBzqEQb
+TkVzsPobh4SioW9O03yke9eHgonHKG6JnU5xJ5lIYEe4zbOeutuTQY1YFN00UYAkfMoyhRfQz42C
+oEjM6HZ086GOPlGUDF3nR51CT9scrVaI0txueEdN6J1LbpXrn1QcdDNbTan+OBqSpgh36jQzqi91
+YtPbCKnnN8DhhgQljSlSnJC2mq5tQui8qCX/Z8aR/RSrGaQnl76Vxafm1Hmy7FpPtQbQspqwrFW9
+KgtflbakvaF/Xt3ojpQ6sLHCR6rCmyhVZprWWq01b229Jz5N1zzrVW94ddXeXYEalc75apO9eAQY
+DQrMnf0MsJRjWl6JkqPATktO4LInLAkFLZUJM47bipgJX1Y047QplE95RPvexSv6vPKGPMtVyZJm
+r8fellhWeYPBIjit2L3WoMn9oq3EUNpe6lFiuJWjxpwDAN86BbhZ45UEqGs/1iYyubQ1rW7LddB2
+ukmn0FLvN/eGXuy6bLv+nsxufKMLXtSqZ7xmXRWCE5ymsQ2EsE5pJkHsIqmBfDUqExZIhQnD4PxY
+ZcN4o8uFSZDhp4R4xIIpyPWogmK7QHggVmmxnhQs4xnTuMY2vjGOc6zjHfO4xz7+MZCDLOQhE7nI
+Rj4yp6YUFAm4iCP8Q5xURIIbqm1Eyhmq2udAgg0BD4XKVGscAORBNZGQx8pj/oh8O5JiTzbZyaN4
+AwD6eqWRVBkkafvdRm7Q0zbN7F5hjsqZP3LlOoekymu+8ke2fBQqd8SoGhkJbujcES0bjNFDuQEA
+3nYkj+AU0SDJEqWNEiSRiDnUSMYLCYqn56AECcpC+RCnkarmLlftzwL+xTJHLM1kLmf5ym94k60N
+HZRg5xrXJPj1rIeSB49EF5BpE4NWhT0UW88T2a9eWR7aDItHPLDV0nYznLVFFEsX+9vDPrSuoWsU
+RntkWYPmCLGJDe8UH/tE5HayR1bWOTLxD9n3drV/1L1oXFs6SLI+tVs4azcARDfbVfs3NqwEyCTJ
++90V/ze56bNujVCNTuaO96HfPe9kC0XPq97XAzv3noqT/DbffMShBb6ie8kDziMPipze82akYrzW
+IW+5yPfzwFtXGVhXIjfIiZL0f28bG9wmzsqMxfSMD53Wvb45wuuCDf1kO4BbfziuD3T0sJ/b6kAP
+OsALbGIvZzrTH1/+88XDbuCKI4HhTLaZu7t2IpYTO72whZCr6j6igD0Cy/KWKNaJrni+oxvXvS0K
+u0F3KKTD/efxBg7TB8Xnhc9MDO+ZuuMNvPGrV9nEWXdLqgemN5iD/SgaL0rczZ322bN80FSOYdIT
+n3YSLKvid6+7wWrPeNLzUNlN/g/lJGr4nyNu7WSPvNIbL5TaR75z6aF82adN76mRffMRYzraac/8
+tBecoKd/i8LfMKLUMxr8/R6/SFxN5vDfm/oc10jAbJN7Qn+EPIGOs35U3Gpt06EIX0joBrHdGyVh
+S3rcwLKAjsjVHpPl3a19msUdoOzVH/NBX71hH7xh4KSBhI78m3n+bVuTgd//tV72QR7BiYSDnR9b
+BEgeCEzN2ZsKCgVo9YLpnR30KR7xPd643V/X/Nr+8SCujYLAyFvdhYQLUaAEYMjwxcrQ6dN+WImB
+tQio6V6GYAM2jB/9+Vz0+aDasaC0OYEp4VoRYp0EGNi/OUFIpMfm5ZptgB4hiR4ZlpvdvBkM0sUj
+6JmOjNqn/ZuRJEXsGaHZodzoWVqOFGEhyt+h+d3CZcwDAd/ZtZzH2Q0VahfyeVr/AV3NUWAQml0U
+4iEi3qGtdY63vV0Yjty9AeGKuMolbpP/kV3Qvd7okWL47WFbtIktKd69CZ5SFGIjkuKuJSKWtQgj
+hhy59WB2rMz+DTyIs73Hc9xMFFabr0iAg3EhKFqavDkBKIbi4lme9ImNzIkivXnEClbi0oWdbwQF
+aCHOI+TSG3weLaYbr4mhpc0TFeriWjhB1b3b//VCChqFMMZfQHKiohmjOzKiQYZeeogEA7hdrNRX
+tcWZRY0EFNpZhQVPUQRJhnFjoZHaHV4dRoagoAVaQprimrlhOpYksc0HJ0aE09VhpbkhAHRaCs5i
+ot0jPoYER/IjUAalUA4lURYlYCiXIYXF0ZSMyXTHUpbMC16FtzCl+SHGU/aMUWalVm4lV3alV34l
+WIalWI4lWZalWZ4lWqalcvwEW/qEF2JGCralXNLEW14GIM7+JV7ORGoAAJBchF/+JWA2xCjUnmZQ
+TUkFJmImJmIOZl1aRpAoJmRGZkVkxF5WZWZQTWNWBmaKxmaGRiqCxmeWRkRwJmFeZmnC5WnaJS1y
+RmiSxmiGRmeCRmx+xmx6Rmt2xm2KxmvCQgcwgm/+JnAGp3AOJ3EWp3EeJ3Imp29SQLFlJmXE5g/s
+gnROJ3VWp3VeJ3Zmp3ZuJ3d2p3T+QHOKRiqKgXKWp3meJ3oqZwdQzmqGxm5eQifEp3zOJ33Wp33e
+J37mp37uJ3/GJySEJ2wG2xMwAYEWqIEeKIImqIIuKIM2qIM+KIE+AYCCJpbJAz30J4ZmqIZuKH9e
+AntWJkf+wCeHjiiJlmh+/ifiOOdkxOaAQqiLviiMxqiDSmiKimeFXqiJ5qiOjqiH7kt7gsZ77qiQ
+Dul+ouiVqahksKiMLimTNmmD0uiR2miu4SiRVqmVdkKP7sePfkaQXqmXCqmR1mZnKKmTlqmZLimU
+iilr3uiXtmmOZmluuue9WMMg1Kmd3ime5qme7imf9qmf/img1qkCTChtBpsPvACiJqqiLiqjNqqj
+PiqkRqqkTiqi+gCh2iaWMYACBCqndqqnfiqgWsOHosZuLgA5nCqqpqqqriqrtqqrviqsxqqsnmoL
+XOqYBlsuxIKu7iqv9qqv/iqwBquwDiuxFquu5oKtrmn+rq3CrDarsz4rtMrqAozqaZRqtF4rtmYr
+rNZqjQZoiuWqsYaruI4ruRIrsnYrhS6rtq4ru2LrtPooiG6EqbYrvdbrtibrZsQmuJYrv/arvwbr
+uUapZ1Yos9qrwR7sqb6rlsYrLPjCKjwsxEasxE4sxVasxV4sxmasxj6sEeBrYQYbKYSCyI4syZas
+yZ4syqasyq4sy7asyJKCx2ZGKgqABWyszd4szuasxvoCtZrGbiKCFASt0A4t0Rat0R4t0iat0i4t
+0watDcQsaqZYNnwB1Vat1V4t1mat1m4t13at134t1WYD1KomRwgANTQt2qat2q4t0yJCz4rmvYio
+m87+7YaGaWpaBpmeqd7uLYOm6d1WRipaKN0ObobC6ZZ6RpcSruKe6NjirYDyLeRGboH6LZJGRuBS
+6eJmLn0aLsPKreZ+bifYbeVCRt5KrumaKeVKaddgLuhmLueS6r3IAgLMLu3Wru3eLu7mru7uLu/2
+ru/O7gQ0rmYGWx0EgfEeL/Imr/IuL/M2r/M+L/RGr/HWgfBSRioywO9mr/ZuL/f+riy8rWvey7wi
+LPm2K7cKrGzi6r+uL/v2a8Cq6XIQbPnO77oqbJwCqfjSr/5e6/nC78d+a/sGsACba/VORuAW7P4m
+8Kza7+F2hrUqMATfK7oWKgAPsAVf8LEWsGQccAT+d3CrMjDDjq8HjzA59O/fPqf6YrAKB/D7nrAB
+yy8JkzAIwy5HyG733jAO5/DuBu8Ee0ZsFq/0BrEQDzERQy/19jBuZqoOLzET5/D3wisNb4Tntu7i
+ii5ppliLnq4WN2nqDuyUUvHnvm61xi0Ya64VeytHZPEWrzGMdnG6rm4Zuy74jkbixvHgnnH6YjEb
+7/GLuvFnXK4dK64Y++y9AC3bHjIiJ3LSPi0Sc0ZsTi3YRrIkTzIle63YNnL8lu3ZKjInd/Ihuy0U
+jzFHOKzOlrIpn/LFdiwm/y9HhKzLvjIsx7IssyzMrrLMYhnNorIu77Ip82woEzJHiHAMR7AJj+7+
+Y+jrCifz+rawMTsGBw+zB8+wKMsrNHtwMV8xR+yrMm/zuDKz6mYIAlezAkszMFOzOEPwNaPxRmgz
+N7czAdsyZjzzOScwOcMtR0QDJ+SzPu8zP/ezP/8zQAe0QA80QedzImhwZMTmoVIqQze0Qz+0pFoq
+PJPtRjAALxQ0Rme0Rm80QUfDHOsmGQfyHSM06T4uH5/0k5L0YwCySNPtINuzFLc03eIxBacxSt+0
+gvoxpn6xTLvpS4dviPa0m9K0D5s0Th91hKq0M7OpUH/pT9NxSDf1lRL1reoxUiO1TicxT0u1lT41
+SHOEOmCBWI81WZe1WZ81Wqe1Wq81W7e1WO/+gFI3xg/PAl3XtV3fNV7ntV7vNV/3tV//NV0fMfr+
+MZbxgVsfNmIntmK7tTp8tJwG8zwrcDrncTa7s2W/82DvdNeEc2TPbz0DtTl3Nv1Odk2v82WfNrB6
+sxdvtmjr72dDNWS39vySdlFXMGrfdgZPtGPCsGyT72t/dWj39sHSdlVXNm7jtmq/MTgLt287Nv5y
+hDXkgHRPN3VXt3VfN3Znt3ZvN3d3t3RjQlwzRmzqQgOUt3mfN3qnt3qvN3u3t3u/N3yXty6E92Jc
+r3ffN37nt357t6j+MkzDwhRzNZjSt2KU7lWjdFYrKxwLeJV69WPHNIMTKVU7slEfOIITeGL+sHSE
+C6mDPzeEb/iOTni+VriF83GCZ/KCg7iOdjiXFrInvziMLy0jZ3ZxbwQkVzKO57iOb+0l07iCw4LZ
+xriQD7nQgvLCRjEsgAIvLzmTZ6wq+/iIp1gEzDKVV7mVr2wEYDhizGzNNrmXf/nDgoJzt3hsM7fB
+EjeF2/Zxn3ZyE7a6mrnB/vaDw4Iwwzm7onmUG/eas7mWH4Y823m7yrmH0zmg1yues7Jp7zmf6zbg
+8nah1++YI+694DNHV7qlX3pAHzSjo3CKLTREfzqoh/qjSjSUa8b1XjSmp7qqV7pH+zdoA7iKh3if
+G4aBlzgbn7ipM3WsmyiLS3pQ77qJijj+osOCGtv6rc96YWg4sPNopDtwVC87hwq7aVq1se8xrt/y
+VkP7hva6s/+6ttctshNGrVf76V57POv6txdus3PGbqJDCLw7vMe7vM87vde7vd87vue7vr87M4T7
+YMSmOyyDwA88wRe8wR88wie8wi88wze8wLuDv59YYe87xVe8xV/8vqPDum/GAz/6uh76tOu5ortz
+m2v2cns8pLs6bAc3yvNvxAcGMo+8ZZe8VrN2y2eroJM5y9/8s4J81Iq8zG8zzf+4PHA2zztrzvv6
+zh/9rPr8ZcR80HPz0KP4yTP9syZ9t2/EIHwA13e913892Ie92I892Ze92Z8914P3pq/+aLDJgNu/
+PdzHvdzPPd3Xvd3fPd7nPdy//FFmKtr/PeAHvuCj/SBsvGbUcbr3p7T//EYUO7mXO9//hbInfoca
+fmYgPuXr5+I/PYk/vumaO0VnCOtmfn5yO7s/O+kz7tonaed7fuSC/m5ne+rjp+lz/L2cAQvkvu7v
+Pu/3vu//PvAHv/APP/HnPgpEvl8APDIsP/M3v/M/P/RHv/RPP/VXv/UvP8SvvuXisjYUv/d/P/iH
+P/GfgeVjxm4qOZin/5I/uf+G/EZM+ZXHv/xTeZZrP2Rwufrnvy6LucoDN6FbPUCQEziQYEGBLWAl
+lAdAXkKHDyFGlDiRYkWLFzFaXNj+MGGuWB9BhhQ5kmRJkydRplT5MZfDjRlhxpQ5k2ZCEgBcrjK4
+k2dPnz+BBhU6cIHDmzWRJlWaFAAJhwuGRpU6lSpPhAoZLtW6devLjivBhhU7VmVLrBy5plUL86hC
+nVXhxpVrsKhNnGvx5s3Y9Olcv3+nXoXlVW/hvIQ9klW8mPFJs4OzGpastu3gt4AxZ95ZF1blyZ/X
+8k2ILkRp06dRp1a9mnVr169hl2bmMjJo2zUJu1u2m3dv37+BBxc+nHhx47vd0UZ7mznbu7D4xJY+
+nXr12OiMPm++faZoWJc6hRc/nnx58+fRp1e/nn14SMq5x69I+AkT+/fx59e/n3/+f///AQzQvifg
+k89AiCqTh572GGzQwQfZuyS7AymkyDvwIMxQww3Te++sCimkT8ARSSzRxAAJ/BBEAxNckMMXYcxQ
+QrtWrBGWC2PMUcf1PIRsORuZE/HEIYks0r8UfQSSuxZ3bNJJ8WbsTDsl5cPxyStz7JEwKm0T0sgv
+wTwRyS25/IxJLNHkMErPytzOO3Wsi1POOV1LpMA2PyNMl+P47NPPP43T5U48JauMAWboTFRROdWZ
+kFA3nUoIKs0opVQwMh89rLbEGuvUU7IewzTTtRK8rNJT/eKMzVEn825SVGGN69LaWMULsU9xzTWl
+UGmtlbLn5DE11mGjUnVKXwv+c5XYZaOa9Udku9pU12mpBYnXZ6FdqlRmuQXK2Gwlc3WVcckt19xz
+0U1X3XXZbdfdcY0YFNylCJMmlHvxzVffffnt199/AQ5Y4HulkXfepBK04N2FGW7YYXe/PTgv78SQ
+x+KLMc5Y44057tjjj0EO+WKDJaaJMJFRTlnllVEmuWSZKkOC5ZlprhlkMRx9OS3vdDa5155jEhVo
+jIQe2qJVjcYI6aRl4pnpi4p+OqKopX6I6qppxPqipbWuyOmuIboaa7GrJltqrsGWMm2YAGjb7bfh
+jlvuuemu2+678c4b27UXytvvvwEPXHC49077psERT1zxwNfOiITHIY9c8sn+Ka/c8ssxz1zzzaFp
+PCJoNg9d9NFJL33yzj232vTVWW+99NRhj1322Wmv3fbbcc9d9915793334EPXvjhiS/e+OORT175
+5Zlv3vnnoY9e+umpr97667HvXQwAUE9olBseygP1hZCK26ms+n7bKfIhgvuG7iVCHwAJHmLocMLT
+d7uh/AHoBecbsbU98D0ECaN4AwCwEakbwa0XCXEf/ML2QP61TYFGgeDUjkUR8rEvWrB4X/ZAmDQn
+POIhb6BfQrbHEQ46JA9OaNsokGChZ8lPIit0IEcK+IYYTkR+OnRIbVZoQ6w4BAk3aCAAJXK4HcIC
+CU4YRefk8QYSIjEikcn+4RIj6BBoOOGIN5zIFi8COpiQT4xc2WAXQ5jGkj3CCSwEwBJ7ERkbQkOK
+sNgiGts3w/1lUIi06kUF8wiZP/4QLUHko3bY9zNYmNCERkGjBLDhxSouZ5A11E4etKPIzgCSXhns
+ZEKw8T81jhJc0OCeTQbYmUfIcUpi6KIQCTlJyFhSlg6BpAwhs73/ARGRh7RaJKkYvjd+zyEjJCBH
+FEmrW9KShWjUJDYaIobHUZAEB1zfXaqJwP9lExv02+BdHoENBOahgf4TZzcTkodz5gGFccTGKO4y
+Ck6Skp6jMiYssMFOWIghkqysCAmAGT89zhKDtRwiD/fYmSPy0mq+TEj+AZH5LGJicoeaTOZyYElQ
+O5IAi4pEwikXMgpYYPIGSMCkxXCSQlg8ooHywEbnjvLNlb50pW27US86Z8DBvGGPnXNCSbcITjzW
+k6iEYuM+31DMhvhTIjkUZRXfttA9Ek6jsaQNLsmHBHQylDZww8rbQinJEuqzjsFsH9wiRauMTvCE
+Ym3oQanIEPJt7xFYnJBM0ZkQF97ohOSTp0NuQILtoU4Cd8loURELpI+CTqSdGSBTEfSGJ3ptoLDs
+43KWKVCCRvGjhewlM5l4g8b2CpNvayMs7mlBs1o1IZnN4kN1ytq3ajQycr0LOQHgBHaK4QZv6EUc
+Z0m+2sCTiuSLo/r+OMi+wyaWuSC6QTj1edy3VTUhN3DCUxEqS8sey4/z9CIHA8tVuM7WJlKFyCga
+O9JTAlSYMbzoQypZ0KvKdr4crC1KIYJJMbwhUjIlX15hAVx//vUhpiSsYT3ZXAUfCJJJraUN8+DD
+i/yMhvKtHw4NaNcLaxQJB/QseUFMAvMS8Q36TEgdtfpBeTghrdiyYoYnwsECpnK1P8SZfSNKvnBC
+kXt1hEYcZYYT8gG0c6vEiT+juD+eBhioe13pUBccZfl8NL0bhoz67uc2XAZygi1F6wLd9kGsameV
+H+6q+qoaxc7FTQIOdsgoTptDBCpQbg58m5gteeeO7k23tM0xTgr+2DZ0QnLOb+CpkLEpThYfWYV3
+IXRekRBHEx5xFFOU8qUxbbRHeJcrYuhem5fyhgtmmtSlRlYTDUNkO7JYKRKosqlhjaffznrWkxEx
+rX+L3ZfhutZJecSouYKEbPJXwzArdqyRnWxlL5vZzXb2s6EdbWlPm9rVtva1sZ1tbfOa29329rfB
+HW5xj5vcbYWdK8mdbnWvm93s1nXj0N1uec+b3urWHQLrnW997/trjVsIF/cdcIGn24WFA9u/B55w
+hXdbnPfmdNr6zTdNps1sT6s409AGu4ivbeMHn7jHDd61iyct46nrONhOrrWRG23lQ2s50EruOe+M
+QBI1t/nNcZ7+c53vnOc99/nPgW7z7qV8bLWJwSmQnnSlL53pTXf606EedalPHekxcBnFaxN0rW+d
+610POjBydjvvMCJNZc8QPdBC9LLVpj5hcvvb/zOmj4u8NpAw+90btKYEx27sePf7etD+w4fTHS1t
+h/vhEc8EuYdc5XX/++PPo3eHO4TskLe8eALvwME3vvCJ9/zbFz87wtj98peXfO76XnrLZ/5Gmy96
+5z8feyOFXnajV73lT48774jCBb33/e+BH3zhD5/4xTf+8ZHvez4IXvS1oQMHoB996U+f+tW3/vWx
+n33tbx/6dLg6yB0ChuSPn/zlNz/yTRF223knBdVyf65CkXb+168dLa/q1v0LwpmX94wwk3j//zvl
+MWKucdgPAA1QMeKP+WqvNuwP/xxQ/+aO8xzC/w6wAsFCAPdO4xSo/SywA1EiATWv+erPAUlQICCQ
+8V5vAj1wBUsCAycvITiQBWXwI0Cw9USwL0rwAb+P8FRwBmfQBVFPgUShFoiwCI3wCJEwCZVwCZmw
+CZ3wCYuQARQwdgijAjThCrEwC7VwC7mwC73wC8EwDMXwCitgByUwIbIACtVwDdmwDZ+wANSvdlLv
+9v6O9dROarxE9vSwRGiPCh2PDv8u98ROgSoPEPHODucPD9luDxmRRPoQdmzPEPFOENePECXxEOXv
+BhPC8Br+sRP74xFTJxIvsewoUQ4VqBKkIBVVcRVZsRVd8RVhMRZlcRZpMRWpQQCmEBJrIxu+oBd9
+8ReBMRiFcRiJsRiN8RiRsRezwQxTMCFsoBahMRqlcRppMRPikHa8QxkGZhu5sRu9UWBAABdDcAHR
+whAe5hzRMR3ZxRCYkf4cYgO+MR7lcR4BJgKucXYK0AdlsAbv0OIYMAd1UEX8EC0oUB9XEAh1bwMN
+kgX5MRH9cQQB8v5OUBNhoSAX0gIRchAdIgYvsgIbkiIbMCKJZSLJsQc7sgIzshIdAhWGoCVd8iVh
+MiZlciZpsiZt8iZxsiVfQQrHcSAdogxSISiFciiJsij+jfIokTIplXIpmTIoy6AdFREtjiEnqbIq
+rfIqcXId7lF25nAU0QQRKZITPXEs8QMUPUcUvRJLShEbLTEtvzITS3ITyXIuyxIqH9IhSM8tr2Qt
+8bEt9fJJwDIuYUEs6dITzdLf/vAvnYQvudIvFXNHAtMn5bIw5/IwJQ4t8vIxdYQx+U4Ix+EzQTM0
+RXM0SbM0TfM0UTM1VRM0l68ndREt6KAGZHM2abM2bfM2cTM3dXM3ebM3ZdP7BPI1w281ibM4jfM4
+VTP9siYhN/IkLfAjBTMkRTJWSFIyK9I5UXIrO7M5sdMAodM6pXM6UaU6hTMhLLI73S8lTZE70fP9
+vrP+PGEhPMWzUsgzFGvjPNtzWtSTLdkzP6nlPe0TIudzWOrzLO/TP9NTOzXQIY6gBBz0QSE0QiV0
+Qim0Qi30QjE0Qx+UJ21QMBXhAUA0REV0REm0RE30RFE0RVV0RUFUEeySaQijCDR0Rmm0Rm00Q+Fw
+OTUyIQpRM3MkMuGTMCmTES0T6zDTR3eEMxeUR5FUR4A0QB1CSIdUD4sU/BIiM5tUTRTU5BwzSzfk
+SQ0U9qa0E6uUB6/US2FESbnUIRrBEtz0TeE0TuV0Tum0Tu30TvE0T930BMSxQ60zDlghUAV1UAm1
+UA31UBE1URV1URk1UOPgRZOGME5ATym1Ui31UvP+lAi2VOYUSBvp8VNBNR7DMRehNCHMUR1RNVXP
+kR2Ds1RhAR5DNVZltR43lQAVEkH/Ey7Bc0BHElJZ7kBxVT9rleNuNVjhT1fhUz55FTMKFDEJ0lh1
+ZT/7sj+htVMANExxcFnH01ddDlir1VOktTFXkhvItVzN9VzRNV3VdV3ZtV3d9V3JdRw4tB9htDbK
+IAPwNV/1dV/5tV/99V8BNmAFdmDx9SlbFVsT4hjgdWEZtmEd9l3/YFghrkvRFELA1FmjdEwNk1uB
+Bi0rFkLUlFMp72O/FFldVUo11vPK9AxhAUtJNu8kFuUo9mXb42IvM2NTlkg5lv8Sk2ZhVkdVkkn+
+fdZBbNZIcTZnqXRndcZjh3Y9QtZWx/VhpXZqqZZd5ZVUERYW7pVgubZrvfZrBdZgk0QwFbZqzfZs
+pTZigXY9YfBbP+VaMVZStBVWmvVmzdNtwTVmuyYf8ZYx4NZu43Nut/Vg4/Y6+5YxwnU72/ZwF+Nv
+jVZuBZc+lfZl+o9xFyNxlxQWPHVWObdzQ2FUXdNVT1VVSbd014VVx9Y6YdVzWTdU7XFt+TMh2hRT
+abd2bddO+RRrCxdQG7V3ffd3gXdRH5VwAXdSb/d4kZd2NRV2p1Vom7ZmTTZrURZp4W5lm7Fln5dB
+npZYRzZ72aNorXQwqTdpifdxsdd7nVZvtab+K9H3PMDXTMV3fGPPet3xTNs3PbZ3Yh1iCN2wf/33
+f5twXh2yXtHCCsfwgBE4gRU4DMuwfMM3DQE4giW4f3NUbYKQWi0XLBw3fJU1cuOibs0XPzO4LNQX
+a/h2hDU4egu3gz24KkA4fEUYhR2jhKvmhGU4JTYYflm4hafiheE3hm+YJDB3TRc3iHFYhQF3h3m4
+WCa3ZCrXiHeFhqVm95Cziq34ilOzNf0UPmPTN734i8E4jHkTOFMXPsEAi9E4ja1YOS2YOZ33fs3j
+fVl2euUXTOg3KvESjtEjf2W2e/W4POT4eum4jmeviSWGaf+4E/h4b2f2jwO5fuOXkBHvju/+0n4T
+eTwWeX0bWY8fGY8nU5IPj5IJOI8vGZOl+Gm8gyWxcpVZuZVrcid1F3CBsilpuZZt+ZaXUmz3b2lr
+Yypd+ZeBeZW1knnFtYih2CRymGWVeImFwodZFoiPmSVOmWlsOJpFIpmvd5mZ2VsM+WCe2JqFeJqT
+pprBmQaR2Hy1eZt9wpmvF5qjeYhFNiE2t3XpWR5Bd4tF13T1eZ/JBXV3mXJrY3XreaC78XXbeEdh
+ARWpcaEZuqFj8RZj2Xx5MRkpuqIt+qKPcRkdGH6f0aE9+qMX2hqJWXFhoUdLuZMrOZJBGfS6eV4Q
++Y8z2YQ3GY5RepQ/eaXdTpQjtWdLOab+a3im77emd1pMcTpMdPpXj7SUoUScjWb3JvipofoJBZgi
+DXiBrfqqsdoLG7iMXRWCo/qrwboWKngAudeYyxkksBmS01mdeYKdIdmdjxmeodaszzoW0tqTA5et
+5cKt8RquoViuyxoWOLKu7fqcOViv97qlweWbCTsWAFt/6fqs7zql1xqxCYKvU9qvjfix+zghliAF
+QDu0RXu0Sbu0Tfu0UTu1VXu1Q1uU6HWoHcIeZHu2abu2bfu2cTu3dXu3ebu3aVuxs4UwlIG1ibu4
+jfu4V9sVmHpoXnucBxi2BRM+YYesIbuYrVO6XXW6M5CIrRu7s9a7G4e6Ue6PXKe8zdv+vJu7W+Xp
+vNm7vUUHnlBw7dbbvem7vicHuFBvcfR7v/mbgpqvvwE8wAEnvhVRwA38wOdG2xR8wRm8wR38wSE8
+wiV8wim8wi38wjE8wzV8wzm8wz38w0E8xEV8xEm8xE38xFE8xVV8xVm8xV38xWE8sRrJltyMifpr
+uy2EgQgqbrwMg9wmnypC2A5IsioqbrTIgObs2MAsqvgHz2L8yZmDBGhMtB6iLYSIt9qmpLZstn5G
+iDiozUwsIuCsc6DBiNxKiySrc8TACU6LsuZr1aAMyuW8MLZnhz7KxCIMwSLinZCgieK8xhLpWbxc
+O9gruxLClHBGkXqBxrTK0gy9qjD+ac4l/TPyKsK0qJv0HCJ6YYcOq8vvwtMtzI5OSSKI3CXc61k+
+CruOys3Hi5wm/dULQ8q9R4F64RGUa+8KXbNeC9Rfi75oPLcEy9cH3SLEC3SUHNaRHSnqfJG2CXxu
+fSKEvHCMfMe/bNitLMZIwIVGS8etfcvZKtnBnSucQALUSSF86Nkj4hF8C9jOfMcF/VhWyMAwQr9q
+LNUhIpyI3cyYKLbCvd+R4hFEK1KyrG3wC0GgacLevd27vTMCqor2rMaYzCF6waUGT7yoy98xPiNM
+Kaxey4bsHeHli9fJC8wp4rc6p4BOS5HoaLJWScK8/TlmLONlPiacoOHri4EmaMv+56vO+MfLfjzM
+I0LO0tzOqMqOkLx/AOzRm/zYZ77pdUcMHN3ppX7qqR7Cbw3X3k0tJIDbzE0puq3qwT7sxX7syb7s
+zf7s0T7t1X7t2f7B7fvt4R5y2B1sQCfu7Z6+517k7n7v2fveEPzv/57A/RHwCV/ABR/jCj/x+/sF
+rzu7Hd9zxBvxGR+8AZfyDQfHsSbyNZkiLT98tZt2NF+mHaJibKb0TZ9mgBtaTub0Wb/1Qyb1kSVm
+XH/2aR9jRCn0f9ohLoEeeL/3ff/3gT/4hX/4ib/4jf/4eb8PYN9XCOMZquD5oT/6pX/6qb/6rf/6
+sT/7tf/5n2H5ayVBSgH5xX/+/Mm//I/fp6dYgTBEqTtBSyJQkIuapTdaa86E/dEfldWf/d3D+1kl
+D+O/kAECFix5AOQJPIgwocKFDBs6fAgx4kMSAA7Ko9cpo8aNHDt6/AgypMiRJDNeOkhRosqVLFu6
+bAiAxMFLJWvavImTJCSLBV/6/AlUJUGDAp8wOYo0qdKlTJs6fQo1qtSjT3gSDYo1a9CUAi/m/Ao2
+rMiTArlqPYv2Z8yDBzy4fQs3rty5dOvavYs3r9tFVtP6/ctw6MFw4AobPow4seLFjBs7fgy5cLi+
+gCsDNstgmN7NnDt7znsAZUXLpEmvFUhTrOrVX3d27Vk6NlbBRafavo07t9T+qq+vyv7t0qxX1sSL
+jxUNPDnW07BSG38OvZPrgbCVW4dIG5ZR3dy7e3/Km7rv6+QVCscYPT1xsrDMln/vkLlz9fTBTs8O
+H3727d/7+9cdHn75lXdefQZ+xZ57Ay4Ii3wHPmjTfdUxeN1+/12IYVQBTkihcgVCCOJxZY3W4YDM
+BfJZiiqueNcwlJWoXHbfhEFjjTbeiGOOOu7IY48+/kjjNy/CCJxZfLCIZJIrBoIckfA5GGKUHkk4
+npOlWZhhllpSNaSVpX0oZZgmNenldVCKGSaVZcqG5ZZu/rdhlWv+BSaaUSZI4pzAnWlniGrqaVmb
+bw7aXZyAWlZnnxDieej+njIJNA89kk5KaaWWXopppppuymmnkvbRZaNnZZfNF6aeimqqqq7Kaquu
+vgprrKZmE6qoWZklQCme7sprr752Og+ZtlrG3Dx3HItsssouy2yzzj4LbbTSHktMrcMClZ0WVWzL
+bbfefgtuuOKOS2655m6rhbXX+oQrIdO+C2+88kob7IjrEvtoc4pG+ee9s1XHH6EC42aov1gluq+B
+jBrsF58JG9gvwz4JOnDFGqorsUQIP6zewhlr5TDH6kX8MUsUW4wyUwWX3NLGIkPnMctAMXdAOzbf
+jHPOOu/Mc88+/wx00DbPgbHMgVUHhxxKL810004/DXXUUk9NddVKw1H+tNHmkcgAFEJ/DXbYYgcd
+mr1aq5XvfC+nR/LZDp2cctxc9ua2xiQOt3bHwta9Ush5G9c23wrBLXfKKwvOkMt/sxYz4hH5vThr
+gTtOd22FX87E4ZQjpHjkYjW+OUxpew7d5JQTjvnAmofe3t3okV4c6KwrdKKStt+Ol4uVz747YZH9
+Dnzwwj822e68G4l78srDxaTZvDMEOez2Zc036qkTunronUuPk+zPCxQ99ziZ7rj117+Z/ebbi1+T
+99+Hz35N5CNu/vlbpk/5+vGP5P7z8O8/kvkJrn72yxL+HKc/AIKkf7xjzjkGAMEISnCCFKygBS+I
+wQxqcIMQbAX16pb+HXN0YYQkLKEJT4jCFKpwhSxsoQtHaI4Pug0zzuCgDW+Iwxxu8Bx7+95B/qdA
+kAiwegArIMoOiLgEBrEjDJwdEJfYkSGCsIhGrBgSBadEKGqkiax7ohY1IkW3EbCKcJLh2bL4RS6G
+rli/aqMb37gpUBlvdqSSlR3viMc8xopWc2QdrnQFx0AKso31ap0PF8IcREhhkYxspCMfCclISnKS
+lKykJRdpAzNqLTvXOJcnPwnKUJrrGpo0Gq6occlUqnKVrLQkInp4SC9+UTqllNkYydifK/INjVpU
+4+Zk+cUwnu2WuPSOLuvGSyj6knLA1KIwN0nFYqKvlixL5hKX6Tj+B2pgm9zspje/Cc5winOc5Cyn
+ObfpwT6GLju6aIA73wnPeMpznvSspz3vic98ulMX1CwZDc8J0IAKdKDm5KHzDvnDfC2AHAxtqEMf
+CtGISnSiFK2oRS/K0Bb082PZyUUsPgrSkIp0pCQtqUlPitKUqvSjudhoxoSzCozKdKY0relFFwBL
+HzJnoTbtqU9/SlGNqnNzHV2pUY+K1KSqtKVDzd/dYgrUqEq1pzg9KEIbpNCpanWrFhWqeHxYVKWK
+daxkPSlTv/o9mHJ1rWxtaFUNedWEHoSnba3rVL0qINaFtax87atSz5pX7T3VroSN6lsVhFDm+MEN
+jG2sYx8L2cj+SnaylK2sZS/LWC+4VGLZiUIzPgva0Ip2tKQtrWlPi9rUqvazUdgsw4yE2djKdra0
+xawfcvq+rBZ2tzbFK4f0Wh2P+nW4xEUpYH8rWItAlbfMxehh83TVnTZ3ul11rcH2Wtzsave4clLf
+YKkL3og+N65yFQhdw4tecvi2u6cLrnbfm13u+lCt6U3veMmL1bnWN73rBat74Qvgvso3rd/dL3jv
+S17m8EIcDG6wgx8M4QhLeMIUrrCFL8zgT1jXX9lRwSQ+DOIQi3jEJC6xiU+M4hSr+MMq2PC9MLMC
+DMt4xjSu8YV5gVv/6dbA1O3v97Ab4CAndcDPoy+Pp4vguEr+98jT9fHzgCzkKC/VxesyMpN5m+To
+7vjKu3Uy76As5TCXlMjHKzCXC5vlxOaLADpos5vfDOc4y3nOdK6zne+M5zYbgMrXyo4QqADoQAt6
+0IQutKEPjehEK3rRgBYCn4eFKxrkedKUrrSl8UyAHDcwX6BYhac/DepQi3rUpC61qU+N6lR72giP
+tlV2IhCKWMt61rSuta1vjetc63rXvI51BFotKlxZQNXELraxj51qUGjaiVs+s129TMf/innaYwZ2
+o6zs7LqmOZbNzjZboQ3cqwiX2uQOKZlnh21vr3XbOu22urcK7nVKu9zlPrcfzfxurrI7twe5hSf+
+DfCAC3z+4AQvuMEPjvCEK/zfxbD2obIDhldIfOIUr7jFL47xjGt84xzvuMTB4HBAYSYBCy+5yU+O
+coXfYtlddHe+pRpvos6b3tS2d3K7styXb3XfOtavzrka8/aKm+b0trl3lftzfbN8jS5Pek+DXr6Z
+Ez3MRncq0p0+VZ5v2udYjyrU6Sf1qUe56gjEd9epuvRf5svfKW+7299+8IY3NepXcQAg7o73vOt9
+73zvu9//DvjAC/7uDgi5nkYO98Qr3u0rt6qauX52n359gGEXe5DJnkSzR56mWmc25Ddf08kTceiW
+FzPmsah50Ds37cxsuuorKvopkr70Uj79LlP/+op2vuX+B+k0sn8P/OCbmtVzB/tV1NCG5Ct/+cxv
+vvOfD/3oS3/61E++Ggw/J2ELf/vcB76yHc/tg7D50uQvv/nrvOfiU/4qQui1+98P//jz2tHqv/1B
+BCDp8+t//+TPNPjb/Xm5d1GxJ0aVR3vvZXvIhHsCKFG7x3QByIBBhX1rAmYHiIATWCbpFoET5YBq
+B4EbGFEEOEwGaIHFlYAztIAg6Fasl035Ug9eAIMxKIMzSIM1aIM3iIM5qIM7CIOJgIFekh3rEABD
+SIRFaIRHiIRJqIRLyIRN6IRDuA4/aCWYMQE8aIVXiIVZuIP1wIKIs2QqKIH1J3sHMW4lCGAneEYp
+CIb+Hdh6HwiGDSWC0DR7ZghfaKg1GviGK/h//GZeeThRcWg0FUiHw2WHpqSGKsiGLeiGeQiItkSC
+g8hXhSgzeOiHieiF+bIF9qCJm8iJneiJnwiKoSiKo0iKpaiJgiCFTpIdrpACreiKrwiLsSiLs0iL
+tWiLt4iLregKqUgkZiEGpgiMwSiMw2iKW9CFgsMcX4ZcMsdedDdf0IVu0Bh+P7aMQudfzZh5h4RY
+0/hk1eiM1IiNqKeN0qhTvUAC54iO6aiO68iO7eiO7wiP8SiP7zgK3gh2ozCP+aiP+8iP/XiO9RiO
+t+ePA0mQBamPvUCO7wMAC8mQDemQDwmRESmRE0kokRVpkRYZkFN0kRvJkR3pkR/pkBmJgiBJkiVp
+kh6JXympkivJkm4TEAA7

linux-imx/Documentation/DocBook/media/nv12mt.gif.b64

diff --git a/linux-imx/Documentation/DocBook/media/nv12mt.gif.b64 b/linux-imx/Documentation/DocBook/media/nv12mt.gif.b64
new file mode 100644
index 0000000..083a7c8
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/nv12mt.gif.b64
@@ -0,0 +1,37 @@
+R0lGODlhFgFnAMZnAAAAAAYCAgAASAwFBQAAdEgAACQODkgASCoQEEgAdHQAADATEjUVFHQASDsX
+F3QAdE0eHVMhIABISABInEhIAIM0Mok2NI84Nk9PT5o9O5xIAHRInFlZWaxEQbhJRgB0v75LSLhQ
+TbRTUcBRTrBXVatcWsJWVKdfXW9vb6VhX0h0v8RcWZhpaJJubpBwb8ZiX8ZiYI5zc4t1dYd4eMhn
+Zb90AIN8fH9/f8pracpta8ttasxzcM51dM52dM53dc94dkic39F+fNOEgpmZmdWJh9ePjdiTkt+c
+SNuamd2gnt6lo3S//5y/nOCqqeKwr+S1tOa7uv+/dOjBwOrGxuzKye3KyuzMy5zf/7/fnO/S0fHX
+1//fnPPd3fTe3vXj4vfo6Pnu7r////v09N////35+f//v///3///////////////////////////
+/////////////////////////////////////////////////////////////////////////yH+
+FE5WMTJNVCBtZW1vcnkgbGF5b3V0ACwAAAAAFgFnAAAH/oBngoOEhYaHiImKi4yNjo+QkZKTlJWW
+l5iZmpucnZ6foKGio6SlpqeoqaqrrK2ur7CxsrO0tba3uLm6u7y9vr/AwcLDxMXGmkM3ysvMzc7P
+0NHS0CjT1tfY19XZ3N3Y297h4sxDlQDj6OLn6ezZ6+3w0u/x9M0A5r/3vvq9/Lz+kQDqEpiLIC6D
+txAyUliLIS2HsyDKkniIIiyLrzC60tiKoyCPq0CqEpmKJCqQJk+lNLWyVEtSKPPJ3Ddz0stRN0Xl
+DLUTVEyaQPvVlNTzU1FPRzsl5fRTaNB/QwNGHTi1IL6nu5Zu0qqpKVSsVME+4pqJLCazl9Ba8oqp
+jAIA/gTCIOXkVsAVo52OAABgV6kmMxr2Cgbil9LLGh/OIJ6r6QgBLAfuMm48YYzPT1siF7a5qUyD
+u1HibtaUWfLoS55NT+a0+DSklqXPxK5EJkuhm7NdV8pMYW9i3YJsT8q99Wqm2MQn/cihZRBuzasv
+RenrdgnwM8uFQzpSOfrrTcihW5KyogiYM89VF9cUWq7i3+sRTVlB5Lyj6ngNd/58pn0mMUmY4ER6
++R2nGWCEMbUIGQE2QUYj3Fnm3VibIPgeJ178kEFz4Imn4F8aEJbcWY18EcQLViziVoITOvLSFgXA
+5R4iVvxg44045oijByAU0QMIQAYppJAwPHhIFILx/qUeieDFCIB1igjBg45U4nhBlVSaAEIQYiTi
+2IzXLbTKF1mUaeaZaJr5RAc5aKeIFStw0RErVehARZp4mrlAnmlCscILU8yp3y5iILECBI7AKaeg
+q3DxQ5cuMgLgCg5uZBwuTpiAhBgQKZqRK45CKqYiftZ30aW1WEFDEF58xIinn4L6aCMIabHDDhye
+OqgtYgSRonOLwBqrrKImglAQUjyEalg0xjlRLKEuotayFIoliLC6whKtsVVFai222Wo7KyLT7kpU
+VeCGK26xhJTLmblZGZKuuutW1C2tUc1Lb7233TuqU9c6m9At2wJrLb68JEEGP/rG4u4iBaPnr7S8
+/ohhgsRnNOxwLgU/LJVh9YR8Qwsl3HCOCyHIIDI986yMjgwkzKBMyy63g1LN8JzAgskoq4wzOzT/
+3E0MIIiQggM2CG0ztbW88MUZDAgc7y5aFlHBCDsk4ebA8NryxQsZd7DoV7oIQcQKBpyhRRM/jOCE
+VV3X8kQRcKYtCBnsNsQLFHSLPQjecL+bi9lxApCFEjuM0ASzuXwNtdSMf5yLlkQEAcIOSmzN9S5O
+A6Dxs3HPogUIOSBhRQATy1LEE/d8vq+3t5BhhH0YA6zLFELo47qlocNChhC/unowLRYzDLnevbvy
+e/DC265LEqgPsntITCsPvCEef4fV9CVVz8ry/vYOjzwh3KvkvSrgh+985AGPDbrgvl9PbuoRNev+
+6wjHzzz29L8v7/G8g18r0sct8SkrEeXTyfkigaS9sIgRBCwge/bSlzBNAjAV/BACAXgIGAmmOxo8
+lybK8AC5TGdJh4igBAuhOUaUYQOWqQEIMVGb2jVGAh6iRA0N9iYOFmJE8RFhJ/CzIPn9qxDZoYR/
+NLEcBNClAUzIISWWw6FO+XAQQOzKAocjxUKoUBEImY+pIAEY+GhCCh0wT2OAkEVJkMc8EtGYB/cC
+pRBKjjVmTKER85fCBhlpEQ2c4SYGEKC3XWILCQhDGyUBIBNE4BG7O0IGtZg8SkRIEV+k2CJM/oSi
+R0gShWs5Q4aYY4kaiKiLlvDCBUjZCNcRMYh3zMSXFuEDHGAJS1e65Y20xKVGvPJNurTSjUbQox8N
+6ZhAosEf3ZIkADxQXsHU0QWI6SNkIrNIKlJAHSkpwEvIUEKK6AKfxrmncZbJT4BSxBZUIIgTlsic
+ZyrnE1bQJkws8gxkgieaIEDPFkaiBlCapR21dxwn7UWQTErEpCqlCMBQEJRrKdQKnkAaVFKiUB2g
+aEEPCk5YEpRshygV7VwRAU3lbRaZQsIA+qc+kBLCVriKhaos0CpcqIpVNpxaNwNXCGTJoldWyJ5C
+fcVDl35Up0blKVJjyT6lNvUgW/TfUp+6jzkhJhWqBqxfJQ+4Pqd6FXZXrepUv8rHsWK1q2e1qlnF
+SlVbsKWt4wurW6O6saxKFa5gZCn+5mrXiijNZn8FWmDTEbTBuqMSHDDsODCgWHEwtrHeeCxkucGB
+Y1j2spjNrGY3y9nOevazoA2taEdL2tKa9rSoTa1qV8va1rr2tbCNrWxnS9va2va2uM3tLQIBADs=

linux-imx/Documentation/DocBook/media/nv12mt_example.gif.b64

diff --git a/linux-imx/Documentation/DocBook/media/nv12mt_example.gif.b64 b/linux-imx/Documentation/DocBook/media/nv12mt_example.gif.b64
new file mode 100644
index 0000000..a512078
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/nv12mt_example.gif.b64
@@ -0,0 +1,121 @@
+R0lGODlhoAHkAOe1AAAAAAAASAAAdEgAAEgASEgAdBgYGHQAABoaGnQASHQAdC0eHigoKEIlJEYm
+JS4uLlssKzY2NgBISFIyMQBInEBAQEhBQUhIAFBBQVhCQkhISF5DQ2NDQmdDQ3NEQ05OToNGRHhJ
+SJxIAItHRY9HRXRInJdIRlpaWppLSaJJRqpJR7BIRa5KR2NfX7JKR2BgYGxdXWleXmZfX31ZWXJc
+XHpaWQB0v29dXLZKSHhbWolXVpVUU5JVU55SUJhUUqdQTrpLSK9OTKRRT6FSULRNS7hMSrVNSr5L
+SL9MSr1OS7xQTsBRTrtTUL5WU7lYVsJWVEh0v7deW4pqab5dW8RcWbdgXrZjYcZgXnd3d8ZiX8Zi
+YL9lY7RoZshnZb90ALJubLFwb8prabBzccpta79wbsttaqx6ecxzcKt8e4aGhr93dc10cs51dM52
+dImJib97ec53dc94dqiEhKeHhkic39F+fKeKiaWPj9OEgqSSkb6PjtWJh5qamqGamqCcnNePjZ+f
+n9iTkr6amtiUktmVk9+cSL6enduamb+jo92gnr+pqd6lo7Ozs7+wsHS//7W1tZy/nOCqqbm5ub+4
+uOKwr+S1tL+/v9+/dOa7uv+/dOjBwOrGxuzKye3KyuzMy5zf/7/fnO/S0d/fnPHX1+Dg4P/fnPPd
+3fTe3vXj4vfo6L//v+/v7/nu7r///9//v/v09N//39////35+f//v///3///////////////////
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////yH+EUNyZWF0ZWQgd2l0aCBH
+SU1QACwAAAAAoAHkAAAI/gBrCRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPHjyBDihxJ
+sqTJkyhTqlzJsqXLlzBjypxJs6bNmzhz6tzJs6fPn0CDCh1KtKjRo0iTKl3KtKnTp1CjSp1KtapV
+h6QkWdrKtavXr2DDih0rlpFWsmjTqkVrdq3bt27bwp1L16vcunjn3s3LNy2jVRU/MKhAuLDhw4gT
+K17MeDGCwY0jS54c+THly5gvW87MufPhzZ5DcwYturRkBGkqvgAEdPVP169Z+4Q9W3ZP2hJx89St
+k3dv27uBB4+tWvhO3ziRJzeeU/lN5zWhK5ROk7pM69eZL2+t/Xl3hthj/oZ/OZ789+jn0ROnWN5l
+e5bv4aefGX9l/ZTx7+Ofn537+tr/5cZffwAGeNyA4iFoXnH+FejgcAb+xmCEzSm44IMQ3mbhQPqh
+1KFJH4K4oXwNajghhhJSuJ2K3p1oIoopvgjjihOFWJKNI+GY44j28dgji+D5qJKOIRFZpJAeIpkk
+kAvZOMsBAAjQykdOHhDAJ1QqSVAhAABwpUcf0iJCl2TS0ZGNmZDpSJYcpekllmfyaKMXNtRCZ0av
+jEJQiIUIAAoBcMbJUSEUxHJkQa+wglEpgGKUJ4da1vLkmn1OiZEsoUC6USkDrJmJlIKyF+ksCWD5
+qaUWydJFHagIhCOj/oFyFCKpsYIp3CZPRCKLRXdeumqrs5Zay6kaxTGGniESS2uoNUYKay3PZhQJ
+FYnI8mqjtm5KwAVd1pltQangkYUnFEUrLbUtRGqnAKocsOZGmlDxRwyRZvLlpMwKqC2W5mLEyh5U
+zKAutNjme5G9WOJr8ECerJqKRIQautG/RsjRkRcAFNrRK4kUYQZHGHt5wbsb5edso/1mFEoQVrS6
+L5saEWunt7J+N221DyncUQ5OsJrRk2Z6AWpHN1RxbEc6a2TyRsvKjJAncUQt9dRUT/3DEUgcofXW
+XHc9CEMpK30ylmKaaRAebFSt9to/VLG21F0cQYUmDkXMENRvs13F/hFLXNH131wvgpCy7t6dt9pt
+L3HEH20ADrgWuyrktNguXlT2zAulEsrmnHfueec6KNEFuQt5QoUpYBdc80aXh11LJ2Vw8vnss+dg
+B+2cH3IEHg8zBHRDmuNOew5mPDE6RggTXOtBwQvveQ5oUDFGpnefvtCTNJcsp7qcRomqRq8Q4nFD
+pqMuOZlvLmxR9wCQbJApcbzSbEKoGEt9Q5V+9IoPSlCyEZddch/4dsCESjikfAl5UrdgNj+eUOIJ
+h5BBehB4oZTAT34R8c0rDvEEA8bkgTvog09AKELyWa8lS9NJw3wGHQpW0ILxy6BxHngIDL5khagw
+EkdwSB0XkkhU/jpBxRhIVwvn+NA9A4PIBSGiG0z4LCZCJJ0OwVcHKU7whEis3IEScsQstmSJDpmi
++ipUOix6sYEz6uIZWQLGIDFJPVw04xplWCKCqHGOK2njdJJ4KBbd8UdAjNAfUchHiegRIWJcnYoG
+OaTt1bEWjPwhTA5pkERq75ECieR+tBgjSMqRPoWcCCX3FMpvoUiTmwykg1AJSJmM0lWlHCONMvnJ
+BHHyJtWCDStb6coYHsSSlPsJD/xgx1raUpU6ecUTisiaXfKylzYk5Rtn8ooi2MaZS0JmTjaBB2Zi
+s5E3McUaeifNGd1kE0OQzTdPEp8TYKEv8ByLGvRgCQ1IoQmK/oinPr+igXfuE56IOMIU3iCISWyl
+n/9M6EH9qdB9qiEE7zQEPhsKTw3woSIagIxpNqoYFmCgAg5YQQY4StLEGECjJTUNDo5AAhMAIQUg
+aABKU1rSk9L0pixYAAM44IKR3pSjBkiNNm+SiixA0gh3mCZL8AAw1I0iEj9Igv9ktJOivmAOxoQj
+GnNSiT+YjgaykUU0W4QTTHj1hC/ww1jJ2JOu1oAJ5quFWNm6VZww9XQvsMMizrCESGwRJ0X1JOqA
+mRHCXoSpSK1FKPbaV7rqaydPOMIe6nCEKCzifp20SRYeVj7DXsSzFYlsD6xwhDNc9q91tckojjCG
+Q3giXUpl/skfPPjVWCpyJ6sdww7mELkMPRYnsgiEomAZ25Vwk2GJNedMgqso0N6yIc51iCzwQERm
+FlclyiTIW+OKWuBSl7jKbZJtKTLd6lo3vDDBmauwyl3H2qS8mkJvQqK7EPgWhL6/1dA6s3kT+4KX
+qnSsiX/LCeAt7ldE3jUvfgOc2pcMmMC+hdCBSbJghDz4vAV+SIUJcuH4ZpiuExbJhgvS4RFD15Ey
+6bCHI9zdEIPExAJRMYzF+9yUqHjF3Y2wi00ZkxvPeI81PsmNcZzZHAvWJiYe8o/ni+KYlekhQyay
+QBIlETd9CXzIGpiYrkyRR1WSOc5kX8YkdkmMPInLChxa/n2/C2SEYPZ6VgrUmZcX5Db/TAFTSh5D
+oizlWuBKVzkrgaG8oLGMqKoONxhYISSgOokc2mV93qXrgmmRPv0pUHfqlUL4rBz7McTS2AI1nYeq
+YT4mzcJsPnFCwjWuKqtZWkYQQ2/NnABINHoiN+utclg56cJqKVpNe7VB+Izhg2yCCnsYrkL61ev8
+MpgjzZZrqlWtkBWSkyFiyp5GYsAFKmxCI4WgQ7Qd8i9v//cgqBSzAH2tkWg9q9fELvZBZJGIXM3a
+IMy+dZ2Z/BFNo9q8bmRIrhfipkLXLBS/ukgpCtCKcT8E4axqYVYRUgguU1rh2Hq3vqUNcH4zJBV1
+aDVC/vI96gaHMYl2UwgcwnA4xLmt5XGI29zwZ/GnwVxqbYsa1hwHOMEZxAtmmjTebj41vhGB53/z
+uUNOjZEPuRtlG1850eOQ85tHtg5rVR5BHH7yfUMkfws5hfOGd7uxh0J3vGsI0w3SPLPbLhQPPB5F
+FIg+s4HL7J+Lew1MXbjbYhxOwf4eQcSO98293eyYoEIWvn0QkpfZ5BQhNJl5jJD6TW8hpYCCQPRc
+sj4Q4glTzQjXGRI+0MubV+8C++P/LpDL+fuz6eEYFQA9ctWNPuCQl4iYxyzLWmywgw0RU5dqnpHQ
+1RDaG48IDTEYIvYZfPUUcdPw+TUA70HfIIlPdkKk/v8m7hM/9zRm0fJh0jAh5AEnOISwkYs8kFGc
+4Qx6Oib4tVoQJ0LaJVFcchS/fN0XFqQOdANKXkcgHzZL6+de7Nd1/UdImISACUhW81cd43VxLOaA
+FgiBznaAGFiBBqiBSNZkBfiBDdiBDyiCpHaBJihfBBiC9PdsHLiBHtiCMSiBAyh/LwiDKJiCNxh+
+KmiDO0iDCyhJGViCMkiEQNiDMJFCSOh/MyiAQfhMTDSBFGiER/iDVdiECOFOFPVPCLWF8dSFXlhR
+DBWGeQGGZFiGY3iGdGFRGDVTP7VRNvWGJBWHcghUbliHnkGHeFgaeriHeShUEeiELFiEJJiDVxiF
+/iOIg4YoiIPIiC6IhT4IiUkohey2hOoniUxIhStohZuIiE8ITp+YSpbIgCdYiIpoijrIiZFYaomY
+ipiIR5q4igo4ikKoipPYioRIbbQIhbF4i6HIX0O4iJ3Yi5kojLKoi404jMboi7sIioGojKcYjbko
+jYfIir/ITpTYdNloEUvmccn4S9vIjeFYitToiK9Iis94jK5IjLC4jMWIjLb4juUIjfOojjxoEXM2
+ENJnd9r4M3Gmj9M3hRORj5unJtc3kP9YkOlTiQfzZJICJcImjhmxjwJBkAwZjF/nJ9gyC3g2LN+X
+jhSnkYAnaHbyfDUYkpdWkYWjerCHEaImEJzi/ikRCZIHwZF59iWZpm0SeRE26ZGf8JICOYusVxBr
+R5O1tzyTc5IJAWzCkpRKeZSbByrL0o9M4y6BF5Rz13e3d4+PWC63tpXeOJQDkW1YGRHmIjTtsm5P
+2XjYkjxF2ZUVASsaV3Jw6ZVwApZhWZdmeWuvBxFedm7rUzAFN3k7uSiqgzEmWZhTpmwQcZbDNzJd
+Fn+nxyt1MpcVgSl9Fnk0g5eIBIKBWSspNxGPBphxeWsVR5fWaJiAdwBBM5N19Wf3ljrL85b1lXB8
+ojGWWRHGkmX/Y3CcCY5riW+qw5IUkWtOd2u0mZpDSThqmVqs1nFLeWtOCRE3A1sZAXZXaRHx/jIv
+WsKSv8l/5NiYBSN5GlFuAtNuGad5PnmRn7l5X/Kdl5hJDuMQKYM9/rIHFZMR5Nl6IhA0OjkRHDM+
+GLGfAwGf8SmU0Yc+V7J7iSkRK9MyDUkmVyJ8C0mVFuF9WAJA7XOQAzFw26egn0B3/0kRPPNE5VJ9
+ZFIo3eOaE1E0RxOXKNolFHAJIMqenqgSQzd1V5M1SMc1X4OOJoE2U0c1Vfc2MheAG5GjN9c2fOM3
+Pbo1SocRStpyibM4jfOkRwA5vIigJ9F2hRc6cldtE0dh2Qg7slN4nXN4uIN215YRXup2xROmKPGm
+zgM90vNmTzOmfWSUKxE+AlpG7eWMJ/FK/lxJEJaHp33KP6G3E69AQB5UPYGKjcGJEjQkQZDKjChB
+qHk5ZRz0qC9BQiP0BCF0QHoqYp5pE+kncZEqqJnqS8opEONHfr/SjXY0q/OxY8FJq7Wwf6RZTKvK
+qq2adXlpfzLBq7rqe1XUqwWBq7k6jqXIrC35Ra6Ke/Eoj0eGqXq5jtdKjyWhqQdaj+oIrc3agOIa
+rS7hrcoKrtjqq+b4qkZWruZ6rtPamdcoqehWqvbKp7UIr/Eqr8KamdpKgvwannZGVQOrmC+hqcf6
+rTB4sPq6sATmsJPqEYQKsem6gRKLkdSqE7mkTvhai5M0rwA7jTYxTOyqrgxLTcvkGhk7/rEfMUoW
+O5k4UU3X9LHA+hBaqIZ0IQhkUE9YIFH5pLNwYYZCKxaKsAWNwE9pWLRrQbRMqxaCgAL+BLRPmxZs
+SBEZ5YehQQIeUAEGMAE9pbV5eIdiqxgbcAQqMAIdYAGE0Ydlexlu+7aTQQIQMBg85VNyKxlB5bIl
+sVm1sF3NOBKR9Qd4sARnkAg54KwaWxNZAAOA0LLjWlVG5QnJ9Y0qcVdOBVVSFbhdmgVXZbNAmq0x
+0VW1FWP/yq0uYVYUlFanW4034VZwNRBzhYqFahOYm1eM5Vfs2LlHFrMWi1hJtVh8pbsoO7IxEVmT
+VVmnVa0o4bedpbiiKxOiRVqmhaiu/guPqsVarmWdlqsSs0VLYFWvI5FbuxWbtFuw7yVcxtuuM3Fc
+mVS5zGtj6uu7p7pc00a/ybRMAwG43asS9oW/BMsSDwbAOaFeRcRe/YsS/kXAiyvA03axJIsekBvA
+DlxdDBy9NvbAEHy9LTLBDVzB9wW9N/rBCqzBG8y+K+LBI2y/AHfBK+xgJnzCqHuEKsylMFFiIuyu
+OgzCm+qOL1TDG3vDMezCO+y/Mby+M+yIQIy+MAydMlu8MjwSnJbDNoyAS0yvKXbETxywQYyQFrdl
+qElsyEFlS5eQYtagD/EoHWKRtQBAH5kQfxmfrJSPFOqQ/ZqgXWI2FLlnWvzE1nsQ/ntsZahZxF0c
+EUApEIuWfBxXxbD5aSIJk4oMEYeWaC75yIiMxnuWcAeqSYdcoJFcxRDRkwgjym8cY338xJ52PR05
+yiRJoAj7wnY5EKRiayUXb0/8nA3xdINMnbFmvrq3kcJiER76xOnGlyNKwmXsPrQpxt9xbNqndn0X
+lYJHwcApegUTbpNmy1sMSfO5bBkXo80pEdxmbkPJKNwCAMfMEOXGeEZUqiljoFGcy7aXfPEGHfRm
+b7I5liKQzrAMynt5lwznOtq8zQIxzMK5PKfpaxB3f78MJ24ZzROx0Kqaz1uCyRjsEK/Xl7J7yusL
+ciKXEL0ymGVZuxMRLUCndQYh/nVDWqSHc6RQSZQQbUc6+nI7h6VHEKWQ7NBDo2lTenNGZ9M3jXmq
+k5z9PBGh2caYrNJL+nIwd3XCetRtXMqETNIN/ZDoAwD8KBCEh6ahoKbOw6YvTRBFSae483Zx58QU
+/SyXIxBk7Tx692vDadEXvRAsSZwFsdV459XCk3iLF5LTTNTYO9UP8c6fLNiH6s1w4gWpx6JM5Hmm
+15610DqFjRCl5z/HKWes6XcV4cqubKMGIXu093O+qZ6c98qCzRAY6sm77M+/56kGgaHOR5gVYXyt
+S3A1yj7hzBCxqh+pbdembZYxmjGiENxy7c+1kH2MWRAMCgtjUqF3fNooHKsu/lF+53cT6YfE9piL
+7gd/SVzNM0KsMJF/VFwQvJqyHBywAHjeTLy7IMveW3q+KFzI8N3d2R3fXBzBPezDoXuO7a3f/R3Y
+/v3eUCzg963e+T3f9W3fBq7gDI7FnJuvCfzfA36zxo3f9L2uAU7gC+7dEa7hG47hGS6KyJzgJF7i
+1mrhJm7eH37iK96OCA7iAP7iLN7gKe7iBX7gEy7i8evhNA7j8p3jwLjjFC7jNr4QOVu1buG0SD4W
+Sr7kYtHkTq60Ua4WUD7lXHG1E5G1eZsZcbvljNHlXr4YYB7miDHmZH4YZn7mbQuII+7jKF7jEn7j
+F67iPT7jc77f7j3kPy7n/nAe5y1e5H8ez24e6H5e53Y+6DjO54hu6Hge4kFe1EAO4UKu4/zN4xw+
+6Y+e55Su6Zle4YSu54p+6Ive5zFL0Ize6JEu6e5d6kTs6KrO6a/u6adu6X0O6m8u6nR+54U+67b+
+6Zsu67pO66M+7MQO6Il+68bO679O5Ki+58je7KGe7MHe6w5+E3F8rF62ZHGM3dglmab+Etk+3s5+
+7A2xx5EtAlK9aZrcIRR5xrINZbY6kXbsxqstu5rM7R+ax3Wcx6K57koSyAaZKvGOPA4pyCO93hFB
+ynCSyPWOEMaJJAoPzwVNBSbLk6v8JVAdEcOsHwq/dZN9EA9vZhcfoivJ/tgOMS0Vj48jH5PDYvLA
+Dp4agS+z/PEJYZ7qMikSLxCs0ANMwHj+6AhTaRHrLOhw5j4aDRE2zxGTkp0XsfM9X5WOoCzB/Nwv
+n8/YTPMK8aAM/ZnqpjR2cO9cvy0LZBESzT0FA89a/zJoGdPc+PUm+pkPndvQfekXcScL13D61tNU
+WtNYitM/p20JbRB6/zY516RA7fcCcSdxzzBDKjU/bdOI//cVLduDnzdX0zeHrxCahpjvnkkr7TaG
+D/kI0SshEwCQaaFtrhB2c9Ku09bCA6Zo/RBQvXauXzt2cNYXYTcyo2m1Tztv3ZtkRvtcvTmwf50a
+8ztCM81szdW2g/uV/maSgD3u1V5pUgkldeco4vMx1xmR0b8QMvAFj039lqLW/VkRlf3tjvw9GQ+g
+2Q9uQ8OcGvH94V8Rdj2dqY/vo5+YBlqpSkKgio3IACGgVS2CBQ0eRFiQUhEwrxI+hOiFQqyCtETQ
+qVWKwCeIHWtRenLIYa0XgDyeJCiRYsFZBzCi9AjykAyTMDuqLJgpAEeNHG1CXNjw50OcB1vaGAqx
+ZNKCS5kaLDUAwFQAEwn2fErQU5c6qEjWzJpRKlUKosZaDbu1zg2wWaNSrRrrLQBHTNV6bdr26dyp
+EwsJDFvr7tfAYuH6pVo3sFq2hflWdXVgKtLCBJ0yvVxZs0FUYzzl/t0cmrNnwqIrd/58MLPpwKhB
+sw7tejVszbNt2qZdGHfurLt5P/X9e2hw4T+JF0d5/KFy5B6ZN1+uF3rS59NVS7d+G3v2k9UNeude
+Orz28cO3l08Inrt66+zZtz+P/rp8mO+h278fn75l/R3xN/+vuAAF7I++AYU7kDf3CjSQQfQSVNDB
+8iDMjULYFtyvOwnHs/DCDcPrkLUQRcMwQ/8+XA/FFE1USsXsRgytRBbTc3E6GGOsMb8Zo9sRIRl7
+fA1I/oT8LkcAjTySyCGBQxK5G2trkkAlxSPyycp+FNJK3aJEkMsIp6QSSCzF9LLCMs2cUsst03RR
+zcDc7O1M2uBksRJMOjFz8QQsLOGzTz//BDRQQQcldFAN9iw0UUUXTfRQRh+F9FFHI6W00j8ntTRT
+SjHVtFNFNeAjKzciqKBUU09FNVVVV2W1VVYfINVVWWelVVZYa8U1V1xv1bVXX1Hl9Vdhew12WGNn
+feARMJdltllnn4U2WmmnpbZaa6/FNlttt+W2W2+/BTdcccclt1xzz0U3XXXXZbddd9+FN15556W3
+XnvvxTdfffflt19//+03IAA7

linux-imx/Documentation/DocBook/media/pipeline.png.b64

diff --git a/linux-imx/Documentation/DocBook/media/pipeline.png.b64 b/linux-imx/Documentation/DocBook/media/pipeline.png.b64
new file mode 100644
index 0000000..97d9ac0
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/pipeline.png.b64
@@ -0,0 +1,213 @@
+iVBORw0KGgoAAAANSUhEUgAAAlgAAAEcCAMAAAAsmToJAAAAAXNSR0IArs4c6QAAAwBQTFRFAAEA
+EAEBAwUBCgMBCAUKAgkMHQIDCwYXFQYDBgkVDwgFCAsHChASJwkDFA4NEg4TDhANHgwHDg8aExAG
+DBEjBBUZERMQCBNRDxU0ExcZFRgVFRcgCRkzHBcUDRdCNRELIxYTAx4mLBUMEBwcEhsiDxwhExsu
+Dh8XJRkQByAtDCMUHx4bACk0DSsiGScsFCRcJSUiGSZCDiwqGCg1LyQbIycpVhsPDy0wNyQVECxA
+PSIfCS84ADJCEStWRiIULSwpADdHCDkgEy1/BjorEjhADDhXCzZvITNPUysQDzs8MjIvCj04BT1O
+PDEoQjEhMDU3LzY9KTdFTTMYNzk2GD6PAEpfEUVjBExFCEpPB1ArK0FjKEVZYTscdDYXG0d5SkA5
+FEiJQUNAOURPAFhCA1RpP0ZJVEMvYUAyBFtRWkYnDlR+QEleAF1jkTojHlV1AGB4PlN5YU87cUws
+SVRXAGaBWVJKUlRRRVZlAG1PWFNSBGt5AmqVAG+NAHNpK17BWl9ifFs9KWmnSGZ0YGFfp1IuCnWj
+AHuKbWBXoVNAdGBPDniWAHujTWmLk14rAH+ch19XX2aRX2t8AIeLiWgvAIeeAIaqa21rOnehdW1m
+AImspWJYj2tLW3C0AIyvWXaNAo6xb3Z5dXZzent4WIKiQojAen+CkX1pcoSWcYDOoH9fp4E+Y4ur
+hoWCXIvGb4mut3xpqYNYnYdUO5rDyXxdjY6LYJqk0IRGb5azXZnMjJGUgJWqpJB8l5aUyJN4kKK1
+rZ6IYqzge6Xho6GdnaWpgqy6yZ9zvaR0hqzMk6rN5Jxxw6mF26lbq7C2pLTGwrCbs7Owvb+8zcGc
+8rp42L2xsMbY3L+jtMfsz8W2nM/yx8jH0MfA7MWU78h/3crIyNTo4NLD6dK1z9bc1dbT3NXOv9vr
+/OKSwur8++Gw4uTh0ef78uPU+OPL3Ojz++bGyfH36evo/+3b6vT88vPw/feu1/v+//bb//nK/PnW
+5f/+//ro+fv49/7///37//71//3//v/8sZeTnQAAAAFiS0dEAIgFHUgAAAAJcEhZcwAAFY4AABWO
+AUTUBDsAAAAHdElNRQfaCRQPAiJBEFMLAAAgAElEQVR42u2dD3wU5bX300nWws50shA4lyTGikRE
+Qy0aUChKvJZqTQGBFNurVo0FWq2VqhAq0hc0t1rAxtLLpu61cUl6gWtNe3vb7Z9IKm+Xqn2tkFih
+GmwFA9Xwpw1s/UOyCc97zvPM7L/sbjabXTLZPL/PhzA7O7M7s893zjnPmec5k8WkpNKgLPkTSEmw
+pCRYVlSjp5n/3+3xGGsONHt2vx1t04PNTbtP8aUujxAuHvN6XjHe721pbmqLsp/H021+crP5wce8
+Ta8Evi+wKMHKHKkwjf/vA+D/77SrAKDeeTRiO3/vcnzDoTzXgy/+CEKMbVdw5dh9tMGubAfuuMjf
+E7HnfgAf/X9yJn6Aupqv206fNfYdXHr/Aloc944EK7PBWg9QurVxlQ3s70Vs+FmAdQ0LAP6By1cA
+KCT2AsBqXKme7mEfajBr25MaTIjkSjPA0mHsVnz/G8jgzyBna4MGH/UzdgHYt9ZrMNovwcpksN4E
+eJpeHbLB5PDtelT4L/wP4Fr+95NirQa34d85cB1jX3eAsGVhiPRuR644WPjOafxgHXw9uD8axL/k
+3+gj3P4vLgJ0SrAyGaxzoFCsfpObJh8aJVMtzUSMA3JZTw/Ab8RKYcD+Rvu2ehsJJIBu9llFwdW3
+0l8N1B0CrDlgpz1K4OfIkRqgT4cOjNkkWBkLFiM4ejT4nXjVrcH/wb9G4BUUwOcZ+xCgtkh74Ci9
+9Iu1Jig/BjhDhmzCGUTzccaKNx9lAqwSUAVY17Kvw7U7S2wLn6fXRXCzn90P2dIVZhxYIlxSiCE0
+W+8F1l+GYDU0hG99P9/gVxiEKxiGvYPMoCMjT2a8fxyRQkQw9HpJg3EBGAmsr4PDz8Eaxz4F+UBf
++DjtMZ0WJ/9ZBu8ZDlZwfX7fjTG0x9ibPTF93D52UEdELgD9LXYw19zteA7onMwLAHuI74SB9QGG
+b372DKAvLQF4xN/7FPlR/17gjD3H/BKszHWFYRbr6siEA7sL4Jbga4zG2Yd2sCuqaoC1H63YS3wJ
+nSW3RyFgsQ0coQLsNn4KdD/3gtcauG0HOCItVgYH78EYq4fHWOFaDLA6tMNHe3St0m0L3+Ixln+/
+BqP3ib0xGue2LRQstmu+vXjz13mMZYRbubhoFw7yXyRYmdwrHMN7hR/fgVGSdrovVzvEUpuXYPhn
+wG9+wJcOaTDZ3GcOpU/fiACLmb3CP5o0ncemCcamQY4EK+PzWD3zYayNYvcwYUj0UiCldTf+9yXQ
+2RNlKl+6Aw2YLRCtU/D+uBZgxQDr9iIkrauIeo067OOu8Cfs38Fxgi9+XoKVyWCx+wBKG5t1tDfU
+9ME81hlybtki3U59w9XNuOVL/r+IJbu/58yXwOgGdPd0aXAuwXU384eAdT7YtzXqPPO+HuybPRdA
+9hnW5YDR2zz41ntnJFiZDBbbbnfQvUI7OBaF5bF+ZdwehALCj+4n2n9qLDkK/8zxMdSNjlA/3UP4
+vRFqsf4+xhG4V8h3G0sB+/4ptJjzB5luyDDV1otUVXd9vbGmpXFr09td96mXha5kT9Yb4psfbKxv
+EgMdDjZuE2MTzPfru/9eX/8HsabWeMcY3eBtaHrL+LiDjVt3B75v224/k2CNFL3+D/kbSLCkJFhS
+EiwpKQmWlARLSoIlJSXBkpJgSUmwpKQkWFISLCkJlpSUBEtKgiUlwZKSkmBJSbCkJFhSUhIsKQmW
+leRP28f50/H5EizLSlHEDC9jCuGxJ6crtoU7TkVjxJxkuGu+XVvNp9t0bS9SFu4Ra1+/PTt/c+R+
+uFLbfMJYtNvMbRk7nq34JFiZrPB5hYdsoKqqA9Sjfbm61ZhkOAdwG1D3IVd2WhJFGp4CB+6Xw8Iq
+kD6j0QbZR3D3F/he8CPjHT1s3r0EK8PB6rHBLARmby7kRm538i4QYP2Jag4dmwkOKkU69gjbqcEb
+rOddgD1sL8DDofu8D/C4/9gCyPHTrNVZp3oXixpZjCCVYI0gsHy8Tihjf1Rt+Le7pSWw2U4bjBZg
+faUEkRJ1QETZte8ShefDT3CxtukV1tXSQm6yBXf+d7Nc0T9o2/d4SUjCyf8iTJZgjTCwng2+FVKG
+janqMn9o3UgDLOKmy1g83NrKQ6zzwc493+/YFFFKpoAqIuk03/5dmoCP1g/00xKsjAerpIWLYzMK
+oDTw9ACfqgY2w7A8rCDpHEETzZb+kPgCeIpqAz7HOD0PI2yXMfYpUcS2gGosLwf7bq8G1zNuwn7D
+JFgZD1ZAFBWdTxVBcjZHezJFKFhPAfyQwLqDu0LOGCysmi8qHS0G+Dg6wR4qJHKCVy4ajWtn0lec
+SzvfDzczCVbmg1VQxWVgs2E6oaY/HgcsP3FVKvB6pGUDCLCu53aMB+eE0E9E3y9ntxet4Gh6a/QD
+q3Qi62UYyyRYIyzdwPt/O2/Xg+X4+oJF1bNhEV/k1YgWCVdIXvGfIupCS6Xz9/8+xQGQOwddoXh8
+ABqv/8JNf9/a2goQ0jWQYGU2WH7W0cbJ6dL6lLYNsVi3AnzNWHfwyXV7WDCOZyI4p7ptRvW/XdVb
+T8/B4P1TZtnRccFCWqoEa6RYrCvUfHPt5JhgfTeQ5uxobz1DVd7HElH0rIq/cb5wAx3yCLTDbf4z
+It1gxPElMAE7mCQqFS/BGilgIRiXdeDyTkoWsO7W1ihgvYkheCuJPz7nBDumUTbrV5D3NvOdT2VI
+j2O8hRudxz/8YT97EXL9fnSFz/nZq4FnpbA+z7yQYGVyjLXcAXb+MIFFEXmsIFi5gU6kv0tFs6OK
+eGsBf1iF9g9yhLnMz0vh+u/npd3VN/j7/EEBpWcCYMngPaOlqCWhSatd84tUteDGHZF5LAKLv+xR
+TeGLQ/N1dcZm8faGEjV/4VF0hCoHaaaqnOIrtYXivuP2MlBnBOvEq6oESyq+QobC9ER7vydyq5Eq
+CZaUBEtKgiUlwZJKnyqmlXRLsKRSrhJlBI5KlmClX+USLKl0qFKCJZUO1UqwpNKhZkVtl2BJpVzt
+qtIswZJKvRSlUoIllQ6wFAmWVOqlKkq3BEsq5apWyzokWFIpV4eiVEiwpNISZHVLsKRSrlpFaZBg
+SaVeoCidEiyplKthZGYcJFhpV4FSPgIHZUmw0q8KtFkdEiypVKsbwVIafBIsqVSrhNCq7ZBgSaU8
+gie2ytq6JVhSqVWVSlZLbeiUYEmlVp4ChexWebsESyq16qzgZmtahwRLKg1mSylvlGBJpVotQLGW
+T4IllXKrpYyAjKkEaygEmU+WBGtINE3J9AmHEqwhIwskWFKpV4mi1EuwpFIvJbMHAEqwhkrNme0M
++4Dl6+w4++rs7EnT+Q3R6SRysxm7hu3D5HQGC1Z3x7Kc8RNnX2XIds1VadXU8ebS7Ik2W+pHlfja
+Z+RMnBg4CVt6z+YqW+CHmzrRNr6x39PpUJQBPQjF10anY37HNek+nYkXm42Dp6N5O5MHy9eQs8Lt
+CqpufOirNGjtNaGv3POyWlOJVWeVbW3YCUysS+/pTHWGnc5VOYf7OcKCgSSzOm8cXxN6Au7x6T0b
+15IVoSy4LtYOJwlWs80Z/slnGSxaYUuZ1equ7XP0Zxcs1NJ+TqdNUaoSPZ2qyKM/u2DxCz/flwRY
+3fkrIz/57IPlqrumKjVcdUReJUMBlqtuam3co0y4sENn39M562DRV3oHDFZ7Tl+IhgAsl6smPxWD
+LFuiQXT2wXK5NtrinU5VGbQlcjreiX0/eQjAQhtcNUCwWi+OwtCQgOVy2gbPlWdetK8bCrBc7nh3
+broVpTyB09m6xGURsFxrywcE1oGov/nQgOVyOgadIVrisgxYSFb3IH1h41KXZcBybawcAFi+0VEJ
+GiKwXM6iwXHVNs9lIbCQrNiHWpFA9r09+q80RGC5VtYmDlZBdICGCizX2nWDSjPE+sWHCCyXszrm
+sbYqiqe/89FclgLLNa8lUbDqV7qsBZZr9mACeJvbYmC55nbEuWFY0s/pFNVYDCy3LUGwfBe7rAaW
+syR5rg6sdFkNLFdsZ+io6KesQ3uM5h06sFw1tYmB9aDTcmC5ViQ9Rao7x2U9sNYeiHW40/ob76e7
+LAeW62JfQmDFMlhDCZZzWrJgHV5pQbBim6zGfu7qdC+1IFg1iUwyyvKstCBYrquSBSvfZUWwlsS6
+xtv7id5vrLEgWHUTEwGr3G1FsNY2JTmgYbwlwaqrjToEprMdu4UFFQWxx89oLguC5Zp3IAGwprqs
+CFZNeXJgdaywJFiurOiDkwOKZdGWWBKstZ4EwFpiSbBcSSZJm93WBCvaLcP2ELBi5bnWWhIs94PD
+F6z85MCqqrMmWBdGM0mOAFexplU0bLQmWAn4k6yl1gRrYnJgLbMoWHN90buEhmL1DGstCtalIw6s
+iuEEFus3xFpnUbAulGBZGqwyg6uY4zkkWBKsZMDqNMDySLAkWKkEixcHiTdxVYIlwUoKrGYBVrcE
+S4KVUrBE+B77xqgES4KVHFj00ArFK8GSYKUYLF/cEEuCJcFKEiwevndLsCRYqQbLqyhx5r1IsCRY
+SYKF4XurBEuClXqwKuONTZZgSbCSBYvFe/yqBEuClTRYtRIsCVY6wGISLAmWBEuCJcGSYEmwMhGs
+JRIslFM3phzrOsQ54keHCViz9VFiI11fGe901kiLlW6wwOBJh/zYW10EwwUs0A2wIA5Yn4AVEixL
+gAUZBRa+KcE662A5UeZ7xrITN3I6hydYEafD/yewnBKsswqW8xOA0jfRms/RItxM9oo0HMF6lB95
+qVO4c+PM5vKVKyRYaQeLWyYOVo0uIIK7Xa5vGosPDTew6GwEWF8Vp6MjTuKK4WRJsM4SWKYQrEkA
+ZKwuIYwESxcu2TS8YqyAVrrcAJNx3RaACUZc9f1S8oEyxjrbYNUA3GEE658nyAqXOodd8B4C1hf0
+vG/Tyq/i/25yiStl8D40MVbIi0K60Emzhm+vcK7xoo5e3CA84b0SrKEBy2m8GId/vxgIroY3WFt4
+wPXo5fxs7pVgnX2wTFdYQ66Qa+MlwxgsdIWbTFco3l5TALl11gJr49xJ+Zfem+nphgIRvF9EXUWA
+q3HxWwZYzmEIVmjwjl1BKrl1OYyzFliXGB3Xh1IOVs0NULppoGD54oK1ZlL+TcmBZYby+sO8a8g1
+ziUyWYmCNQlqBgpWd1ywHr08/xpnUnksI91AOQZ3gVii1RTI5z2UIFg3wNI0gvUFgM9sqrkHD6wu
+xWBR5kindhwQWNOUKl9MsP7VyB0klXkX6Z6QBOksc22CYH0ZBg4WKNXdMcH6ajBlO/AEKcdpFh3f
+lot0I8Ry8UB+ZWJg3aOnE6y6POCPqXlUh9tSDNZFUOz8NBS6BwoWKoytIFiI6t14oNclBlYqFAoW
+IZgEWKgwtoJgoXn5TE0BfDIxsFKhULC+gDSmEyxdXLimq9ENr1in67xTXhxYC6V1Bueom/iuOl5y
+t8UC69FR8DDyqn87CbDC2AqC9W90OP8Gk4YELPScyYIVxlYQrG9SBP5lXXcOAVho9wrTChZ6F714
+ZRhXSNbdBJzQVdyaBVzHp43VpS6xSaQDDYK1ln6xLaH2ZUBgBdkKgnURXEgxd27dkIB1t2sQYAXZ
+CoJ1Azm37+uwaUjA+ow7ra6Qmp74mOcMmq8vQK4bF9H5110CY92uFaDjXl+dh32PFWi9hdm6jbbW
+H6qJ6QrX8r1CDeLEhgQU0hIGW0GwdAKrJhTmszuCNBys2fUJnI4adjrEVhCsKwks/BU3DokrdKUZ
+LIxkddMerRFm+fuj4A4836uIIKIDadJu4ZcVgja5Tti5c4m90jgxlgnW7CAFSjKq6gMWWAOsS5M6
+neogWJcSWO7MBQvbiiei5xFBhm5Caua6XIaxKuC92eJNLmMtIiiM2uwEwJo1OLCmtVvVYiUFVmXn
+yLFYwiNehE5vBeUHuOaGgeW6h/dt9W8PEKw+MVZ3vwqNsYgq68RYfcCa60vgdCCcKtbHFQ5RjJV2
+sJaCkWnCBfeaYA8lHCye7dRhXogrnFwXoCxGr1AfVK/QoCpar7DYZRGwBhS8V3b27RXqQ9Yr7B+s
+jsGB9X262y9uDlxWh/ZlFrbUo6VLnSFg1WFHG/faMgrj9jV83GUgeI8Hlisv+TxWkKrwPBbEymPp
+ISOv+tOWgn43ASMZmTKwKjti5rH08/rJY9WJzO7Fse8uzU00uz0QsMpaB515N8YifttMUgHkhoIV
+SEKQC7oE9JB0Q1ywRJbiNtfAwZrW3h098/7pWJl33XTi/YPljH/bmSs/pWBVdsTIvFOO0ribHBus
+uov4uYWl6Psm5VMPVr3SOLgYy8CmeFPwRbEz3BWKtYWbAglS/SZX/2Ald69wWjhVCd4r1EOzpmkD
+S9cHDJajsiPuvUK4qr97hV8QRIVb6tSApccDq7Vv+biBBu/OkPkewQkf5n9ha8OWnVHmtwx6dEN3
+UqMbQsCqyZ90zyTRFf3ipPzZnGy0clvmTip9iC+izSO79uiVBcaYjnxw3TPpwltMdC9cEgusCAd0
+dkY3mPcIL9dzuSOnkxK3mddcWZA/9aEgWFvmFly4xEDm0UmznP3dhA7/7gv7lo9THN0jfTxWKFim
+uzScfDF/W7y42ozGzFvSfMyMGZ/R3gVmZGAZsG7g8z8CSUdxeDRmRozug3NNsIzzXcvBmgR5mwYJ
+VjkFh+0SrFCw9E/y4VaFaylDV8xpKtxIMR+a2Ro+k/DLGDg715iDSOGmGgzfruW4Xc9XWwesOqLl
+QmO83Fd1KN1Y8zli7Vu6fq9z4yQaJcPBwrdmbdp4ER9IQxHZeXWDBKuWdzuaRzpYgU4hgkPjBWqM
+7u73aaSMDvS83G9yjJwGTNfxZbrhLpb58CyA8wSb1gHLmEEIGh6p8xJ+fM4r521y1XzxXpcxNpnA
+cn6Cj17EUP9eAuu8/mOs/sBqNe58jHSwzE5hjRhz5TSGXrnoRxYjsraEgeUU/bxP0p9NZorB2MlS
+YGEwdZHRwXZHDrZaczkYYLmN+YRz4bw6BOvewYNlPiGvRLpC0xWGdf4IKmMudBhYhgpNyAywnBYE
+ixz4F3XI+3ZY3Qa6HUJpCAOsQCpvVF3MAcoDA8t8Ql7gaQgSrOgWKxwspyFzPoVVLdaauWvNVPZa
+d8g0588BxlhiXrRpscwzShFYtYG7Bi0SrABYGGNNDomx+oJ1XUjeMwSsqy0GlrsAxvKFbyFYGGNN
+EIHUBMMrfisQY10iDt1IfaYCrNbgXc5aCZYJFvX7Jm+iXmGhKxKsux+l0fPXO7d8EfKvDgPrX83O
+oqXSDYUr+QCUUS7R9auhwArByuWnhwwFe4Wue4KT7gcNFgu5f14uwTLBMge7FrrCweKBvlGhxZyo
+E7RSYvVtVoqxPgGBCTmBPNb15tLkAozTRR7LeCt3U8rAKguC1T5SwQreJKwxK0TiVT5J55lpfJvW
+GbUjt1yuz+aZd9BmG+8Gt3GtmaSXbnLpVgret+B55M9+SBzKlhsgV9xOoCNd6/qEPoGqSNaJt/RL
+HxKZ95SAVRvuCeVM6NRpZBe3NYMsn5xiL8FKJVgs1A9KsCRYKQMLg6xpXkWpl2BJsFIKVi09H09R
+CiRYEqyUgtVBw2YqFaVj2IJVKcFyWfXJFM2K4hmuYHWoEizLguUz0qPDEawyRYJlWbBoGkL38ASr
+Q1HaJFiWBavBvAs97MAqD/ZoJVjWA6tNUaqHJVgdNONLgmXdx8opijoswaJR+yDBsi5YZsJhmIHV
+wW8bSLCsC5bHmFMxzMCqCBv+KsGyHljtxpSK4QWWMFhh04wkWNYCywyyhhdYFUbZDAmWdcEygqxh
+BVZnn0lGEizLgYVBlne4gWUYLEWVYFkXrHaRyRpOYHUGRlVLsKwLFgZZZRYGa3x0722oNdZJLbMo
+WLMzC6wZ/VQtI7CWWBOs/HgGyxyw31cPuq0J1vjkwGq0KFjl8Q66mo9PzppnTbCmxzNYsW/qtFnU
+YuUkN26xc601waqPd9Beng/Kml1nRbBqlvWtsuapClTYj3lTp3OpNcGakRxY7BpLgrXCy/qN3rNi
+O4+hBGtljKExtXjQVY7Y0Xu3zZpgtSQJlm5JsK7qZPGj9woEy7vUimCNj8GN6BF2x45YKtxWBGui
+L0mwqjZaECx3fvyDBsoHZbHxddYDa2NF9ENuDYx8jTkOcK4FwaorYMlqqgXBWtEc/5gr6erPYo0r
+rAfW1JhGVunv2tfc1gNrbmfSYE2rsRxYbls/x1xL3cIsxmLxM3RgbVwW02CV9NuRutJyYLnLWfKa
+aDmwlnr7OeRmuqmDYLXMsxpYWuwIq/9rv95pNbBs3YMAq3ajxcByl/V3yHj9NxBYrHqltcC6qj2G
+7y5XKhJoCsVtLbDmtrPBSK+xFFju/i8Tnm/I4jOqaqwE1opt0Y+3Je6g5JC5bTluK4G1opENTjZL
+gTW1td8D7qZ8AweL5TutA9bKZTGvg3gTv0J7hqPd1gFrRfUguWL+8RYC65rdifgMDIUFWKxko1XA
+WrouNleJtlFnVG84JGDNa2CDls9mFbDcF7+SyAFTIivLzMQtsQRYdeO9MQNCpXIATbHWEmC5x7ey
+FMinbbQEWHVKYuFiuaIEwGItORYAa60tRpqqakBcoZr6HvzZB2tFTgdLjWonuoccLPe8GxPs3lYq
+SndW8LJYN945pGDVrc2KYa7aoCDOUJkY7vDGqe4hBcu9IquNpUydkyJGC5xtsNxLshLu3aIZ6MwK
+Pfgm29SN7qDG/9ydVm28JuTFivHj26JfEB0l2B1UBu5TOmpzZteEfMPE9J6Ne6or5MXS8eMPs5Sq
+Y5ntGudZPJ0lK4LLdUtslw4gaVKtKB1ZEUd/eOvCS01pl6ZZ+ebC3GVN7TFSn94CGidTltxd3I7D
+62688mydTsjnL/O2d7LUq+PAA5eetdaZdKG5dOMDLe0DyvHSPZ0sZmV5y8IrpkoNC9VbGqz2anSB
+NLSvoE021fBSg6K0WROs1uoCY6xoWUOHbCgJVirUVlUgLBWG7M2SquEoC8ZYLWXGuPYSpT4t8a/U
+WVCUXuHQqkpV+FOrobHdJ5tnWIPVaSGwqvjseaVaQjXchS3pswxYbdwH1sugKgNUEXqvcIjlAap7
+JW1VRqjEOmB5MFwvl1hliGiqujXAokExHtkgmQNWpTXA6lQKlGbZHpmijsCYdwsEe9WyPTJGLYrS
+aAmwOhKcJSE1PNRIjz2xAlhV5YpXNkfmqIrK21oALF/ch5hIDTuBqN1ghS6hjLAySD5RxmjoD6Q2
+8LhXqUyQl2J3K4BVEO/hOFLDTtV8YvHQg9WtqOWyNTJIojje0IPV2W8xNanhpLYy/pSmoQfLfFyU
+VMZ4whargFUrmyPTPKEFwGqjMl1SGdQnrLYGWL7WVpltyByVG7NAs+RPIZVa/yNuo0iwpFKpShG6
+JwCWP4FPC27TM9AD6Ym+m182UUp0tn9HNFhGTftIsDyqkQZXVPEknu3zdVWbsbnvIR+7vUjVFu4j
+Jj7MUkm054YiNX/ZUbFnma6WrO6740Gb+IpD+MkzdoiVG0rU/DtPibWAn3B6xCNRFmwIUbniNfy9
+HTOWnYqGz1Pmxo9NdzhmPE1LO8t0rWQ1geXfH/JDB/puqiGyLxum68Ze2BB2beGJnqSP2jRYfcEC
+83yA+mpd04FmOQAUHo3Y8KAOqmID/Q90zhqQVNY7Exy4tUYb36/hnhpcH/ndvVOAPyH1VTtk4/tf
+o1XT+WcVcupwUaPFkR4Emw3hAA7WBgf+MPjL5L7Ul6tDYGy8gFoL4BvM/4wDf13gv/5+vuj4Qdg+
+KhhCDhabezF2K7afTbRfMmpWppkDVfoBaw7kPO9jPXtzYHLEht+FcSeYbw5chsu7wNbWimIvQu4R
+5ltM53PcBt/zs72a43fh++2fAhysro/Aom6210bv/xhmdLL9NvWHjH0JinFRgx9KsMLAegbgEew8
+Hz4f7H3syU4wwPp/GjzP2FOQd5RdADf72c+0vLcYmwn3+tkL2qi3Qvdp5VoOE/zsTQ2ew720vD/j
+Vnl7mG8B3JZkBz+kMFB8sF7TdHGBYFP/lEKzqsDQ9NunP0BZC8jhkF0mVl4BtPLvNvt77ECFfhoN
+cRasY69WVf2ZsWMPVG1lbL4KYzlYf9X0dxgxtYx15ehv0Lm+3clYNizjX75MghUG1vlGY6O9vxr/
+q68KFs6cDo5csfH2+dl+P+tVoY3RP8b//tNGdCFev2QfPFBFrbihqlLEXm/qo470sGa+F277CrsL
+rsPVv9Wy30s21RAYABUfrP+A85iJzE18ZUSS/H9hHP49Bx7Y+WATIyyqxb7/bYTk7+fA91jvR8je
+fRZGY3ygaM+3cbBahUNshQlo3EazXdVbT9DrL0EpWjObtFjhYP0JHCeE2/sOjMKlSgiOCFFK9wVf
+4m/+Tw3eRouFru9Nsli/EJgsh2sZ+wrkveV/hlsoxmF7OriXDfagg/olo0U0XkmoUVEcLDZYjuoq
+VLWDwPo4PBIgaAKdQ8SQvJOj4BbGPrBxb134FvsYt1hdWfC4scHPwP4Gt3dPvyhsXpvfQOqvoNP5
+vgpj0XgVLnAAOOgsj+fAwqrpUCxjLHBU8YYAAus7kG108Dg2vC6xqbfDOUN6sk+xF2z6sgd53PSE
+2HUVNWDXGDj3Q53bPGGZToXu9Q4bA1TGvZeM18DVGlYhry9YATWQBdpqrBc+L0IY2tuPoMO0QfHu
+XWSW/gPGYn/uZQ0M/l6wwSLGY8J8HS41D4CDhTHYN/hFo7EDALk7WpaDg8h7ir46SoQ68sAKCFur
+IkiOg8CKzB6FgLUe4EcijgcYi+A8KN6rogb0v4DRP2QbUdocvqHQUxpZL7sgKimwOsLnhvYFS21t
+QbUqkWCN7vNRJ6eA/izFbIep8uwhjNNP5kBh1e06YGBF9vUZJI5fEyfRpuW+EwYWGjO0TWXAwdJ/
+YnrB+0Hb0XKfpv9UgmU0BJbt7hUAAAvPSURBVAfr9gTB6mH3YVfQTxfs2N0tMyHnRBhYgrdfi23f
+tI06Yu613gGz/ATW7mTBosA9dJRK/BjrioAr/HEg2gro2BSw/zokjZAFm9mhMQ5wzLoCAys8WrwK
+ik+ZfUhhukLAIuwge7M2Dl2h6udeMZcds+m/YRTbTZZghcZYQVf4N97TiwFWD4ZScIuf+of2oxyj
+O4KukDfgnzQ0WGKn++BfTK7uEnsZrrCLwq2BclUWMayuv+D9XAqH9jGMnh6J5KoIcvaF5dyA0qgH
+WtrYKP13wrpeb/wax5AhnvEKBYsda209cQBmoVfkYB1AsA6I9w6AJsEKBetvGFmh/3qeneERVEyL
+tRx0Ho+vMs2UzQze74LPi3hdJKy4J/ylsTty9XjIqn/mDDh471SVaeGPkowP1n4bueHP2m/ZzoPw
+sPhqCow10J9TcgsPmvTfdXqf9NNSDv7FaP0b5hUxEwp1yPf7Q8HyNnq4Kfsa682B33CjeC6F9PQ9
+f8SQXoIVmm6YQhmdX6jFe3X4AYsJ1nrIEx2+JwR+y9FMYdeKTNwF8HsRwY4FnduDDwJ9P1z5U9OI
+kVn7Hy17gLeC2qgGY/cAwMIj1Vef6L0PIz5+U6eq2hsSIy6sRlVRj1HfwY4tQPd1yIbo49LX0Bzl
+QC69X+2hcEr/DfYMbw6zWN+F/CNsly33HT++n7+H4U/2DdaVQ51LXFwowQoD600NFu5hL4MOY6nR
+G6qrooCFG43lv3n7u7nwtVNsu07x1AIoPYHNRR7wXR1uRotAeR/yliLqfTPX2KsNwy7HDnZwSqBT
+n3DCXVGmRVSC7wcsdp8GqupA+5m/2R+ax3rfZnRZcPNetK+qCqOPUOxNS6V+sj+GqsgRLqLrwnCG
+Aiw/kqerDpVHaYtpEQr93EbS92knJFjht3RetuMPw2/E3HkkIr8QeLnA/M3bKIClrSkWOa7TIv+h
+MZo/RVc/XeL/CdmnTUcYuLuznpobxp0a0KFWRnvQUVbfJJcBliJuQr/+WJGiPdAyBfLeCM1jeRVT
+9GpXmZK/mTqxPTunKzOa6Jo6x3y/qmuMMprWzFFs7xn5DhFi3We33WkEorumK8U7uP099mQRLp4a
+6VyxacGGEMmhY9vLsm0Ln7/LQb6wPHzKXIV4+RHzN8de+sFVevaM53lO9dgG3XYnub/1ikJ5nKcU
+Bd3ig+ZHBPYib7R3fnb+5u6B3IRudSjRxgAnPGxm552Jf5c/ua3kWJlE9PpMS111vHJslEc8yIF+
+UoNQgwLoBqOVYpRgSSWtRipIDC1R35NgSSWn7lpR5zpG5VgJllQyaq0UPbOYTw+RYEkNWG314sE0
+1XHm7UmwpAYkX3MlUkUpBk/c8ukSLKmE1d5YaT7ur7q/h0hKsKT6V2erp7qiIJATr27t/0m+Eiyp
+aGrxNjd7GmurqyrLSxziOX9Clc2JPUdZgiUVTaBECFeU17Yk/nBuCZZUNBWEMFVQUe1paRvgY0kl
+WFJRXSEfFt3W3pHsY24lWFJpkQRLSoIlJcGSkmBJSUmwpCRYUhIsKak0g9Vab0zwqq3nQ057vQ1b
+m96OuuvL9XySoZ+1NG7b7RcTO7z1TebErdcbt/WtAHAwuPJg49am4LQA39Z62RgRqq8X2UmP0SYH
+Guu3RS+q8O5WsQW2RQNuwtuCWiV2U9TWG2o3WlDs5e/11jeeSAdYEfMKt9tpTqFaGuW7juXwSYb+
+Y9NVAIe2B49rfx5ubeNzvHuX22i/8FqiYmXhW+Yi2AKVMReb8+6lAnKAGEgnSs3sn0KzCtXRf4iy
+5QLRav69OpWDKj7Rw96fSa0yms95vs/GV4btEVIq0r+3iO91BFvwNWpB5fG0g/WyBouamh+zw8V9
+djw5EzhYvRdA/jbPdBj9Hk1MLW3aYHM820OgFDY9aaPqWSFaD7lbPTMh30+Tox2rmxeICfWMV0KU
+YMUF630dxm1tbiwC+9tnIjdcr4lWw20ubmoEGOdH1OybPUU0PxV/dftWXDw3bHaduAuoQd4+KpqF
+exXBuNO0iC2oOX6fbrCuAF71+GUtL6KSKNuZBwKs12xU1eGkDb7HvstrxPyWivy9puHJsf+dsSh0
+n+M2eBZJ/Bh87wz7GE2O7rIZ5R0O2SRY/YD1HbATGb1TqDJfmF6badYg/Y5qP2HU8RtFk+vf1ahg
+5Bh4iTO3L5qlQ+P0Pzaaa/+uLW8PewJoavEGXmQvrWBlGzVmmprbOOWBQpFesD+icrA6W71i82qE
+ZR1dNlRR9Me8tB93f3OU0afRrimj/X8FlVzji8TUOXyDLF40mfk+kvusBCs+WBVGISNvM9XkDJ0J
+rUDpjaLV2luahZtrYzq0MlGN9C/aqKN+ciE/YF15Ctqt9/lf0lNU25YdNveiGqQPMdbzF9uod9IM
+1q2Qu/lEyBkEAuzdq98KK0iKJucniOE6sdkP0dT98LEi28I96PePU6mAn4H+UmjZUVxRfITt0kQN
+m8Xw+AEJVhSwOoNg/QrgzmAEHlq7YeHz4aUcXgC0WAvgslOiEsh/CiKpGhYV9HuWikKKNv1wlB60
+Yi9Q1eSP8zJGH+bk/SENYBlDvHipyIPZ6KJmrDNOyNPcGuamg2D1ziS/fgUPqdArbkbzS1Xewf4c
+vy7053gditc0HlL9GHLxstgAdkXTnhMBVilrk2BFActsCsJmOjaFtszoSHubPaFbhoJ1vIjs0MkF
+oCowDsF5DLJp9SpeknEBZG/XzKJF60OK6Z2cQnvpyVf0GxhY7OAC6rw5tOei7BoEqxej8F9TKObY
+wU4uB/SK2aA/z3z3UUjPus7BjyhGJ9h7Dsw4wfbmIEPYl8TvUeFOvx+tXf5pCVa/YPVu4D05ZXWU
+EhchYCFXo45QTw93duAl7g+UiqSm/ruOH2E4wt4xwcJ9yNWofURUiwBrd7rTDeiBPbdnO0B9Lg5Y
+vpmgPm3UKcSzKcLTGWUaLyqrvV8Dx0uUJTmETClU8IhgW3SKvf4R3OzkmFw8pXYJVnxXSL+z97E8
+ozRRTLAO6ZCNsfoHOmz2U52xl9BiKUGLRUXW7EdEzvG3WraZDTpWJKp+ptVihYPFj2Hv+dH6CSZY
+vinC5VFfcboyY88V8N/oFY2C7xR1vaoB/Jp/0LFVDu2BV7QJ9PiAf/A4fhzaKsgm4wVKhWQpTh5L
+6PBiyDsRGyzkitfvNAKr5RhYhcRYIq+jG2DdBXeYNOZBDjdeIsb6IMk674mDdWDVFNE92AW2mGCh
+FdVCe7JdOXazV9ibRVVuu8ag+R0d7Ge8CnMpjqezfR00AstQpWQpNliPlf1cOLB4VZOP6/QgGhao
+wb0Kctifgr1CwxUaddXGmHYJvee4I0aamnqFf7LZ09wrxL7encYXxrZYiyHXeKbPX8vz3qFIazLF
+6WOPUoVu9Q1ebnKHqPf+lRL6Owc7kGixqMb4rTCZdXhI9eBo9kqWYoM1nUprM+pOx7FYRfBR4Sd/
+oelHeMD/eQLo14E8lgjeeWb9bwG7NF2Un2QskMc6L915rPsBCmsbn5wOKsVIEU8F52Cd2asZ4X41
+FRDN3/aY3f4Sz7xrW58cBbPQQFEW9Ble1f5F0Fc3zOePnVhMi7drjh8ZaWQZvPcD1ssOyFm3rWG5
+g9d5jKjoJ8A6Qw9fEBX9eqfg1g0XYBx/hjLv6xpE5v1n1CP8iqhua1RTZmeeMffyknOZsW2VI/2Z
+994N2fxeofZ8RB4raLG+ZDoyDKr2Z9P9Px5v9S7HqEmddYr6HsXcNo0+KlbaZ5GB66EbWJD9tPlh
+Eqz+YqxdOvUKHaJXGL0G6cxgDdJj/F5hDm+39XRfgyruoyO8mSfvP3oq8CgU8iDB24YH6bah8jRL
+PVhtnkax0OjhSavelmZPc1vYKlONnhb+1xC96PV6dpsjFl5vbqL9Xvd46Kazr8lDHY4DYiXpIG4b
+NOroECVJkRe5R/QKvUabHPB6ml45FbbKkPHSbApPB/+pPa8YHu5gcxMfvOD1eGj31zweDNNagi1t
+iM9GbfE0p2V0g5QUk2BJSbCkJFhSUoPW/wfr5tj8wgE+HwAAAABJRU5ErkJggg==

linux-imx/Documentation/DocBook/media/selection.png.b64

diff --git a/linux-imx/Documentation/DocBook/media/selection.png.b64 b/linux-imx/Documentation/DocBook/media/selection.png.b64
new file mode 100644
index 0000000..4161865
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/selection.png.b64
@@ -0,0 +1,206 @@
+iVBORw0KGgoAAAANSUhEUgAABIsAAAHpCAYAAAACi7yYAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBAiCLMGMtAAACAASURBVHja
+7d3rkds4FgZQaMohTBY7ObRCV+fgyWJy4P6wJavVIgmSAIjHOVWu3bElPkBSAj5dgpdpmqYAAAAA
+ACGEvzQBAAAAAHfCIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMDDD00A
+21wul9XXTNN0aHnP749Z39o2rK0jRzssLX/pvVve9+61S69Jdey2bn/sMTx6TAAA/cIW+oVb+2tb
+3p+izwioLIJsHYe9X+a979vae89ut6Pb1+txBwD0C3vZN0ERrFNZBAct/ZJxuVx2Vdg8v+/oLyEx
+69j7xbq2/1u2e0u75Th2Mevf8ytVzDkDAOgXjtYv3LquVP0nQRHEUVkEBTsJve/r0hfu2hdz7e0W
+27HQ4QAA9Avr7BcJiiCesAhO+GKK/YIt8SV+RscoNmippUPl1jIAQL/w3PUc7Y8JimAbYRGc9KVY
+Yu6b3OsYNUTRuQAA9AvL9AtT9LsERbCdOYsAX74ZOiVbO1M6LQCAfmH7/TzohcoiqOhLK+eXV4p1
+xP4y1krF0X1bn7dXBwIA0C+ss19oagAoR1gEJ4j9osv5iPq965imKUk59eidwNc/AIB+oX7h/HpK
+tzeMzm1oQJIv7Ra/eO/7sOWxtgAAtN0v1N+DdcIiyPQFlPP1JbZpTyehl19q1joQOhgAgH7hOf3C
+Pct9tz36c7DMbWhQwPMXUYkOQ6517P3Sj/216axJEdfWoyMBAOgXpukX5uqv7Xm/W9JgnsoiSGxr
+4FHiiyvlOu7v21pu/PqLzuuvOTHtlmIZW/bz+f1r6177ewBAv1C/8FwqjCCesAgSdwK2dAh63e+5
+fX8XuBxtt1SdkZhy6djt37vNOioAoF84Sr8wV39tzzIERvCd29Agg7knQ8T+unTk15mc64j5El17
+KsbRW75inrqR6glj79rELWsAgH5hmn7hmcckpt8HI7tMRjYAAAAA/KayCAAAAIAHYREAAAAAD8Ii
+AAAAAB6ERQAAAAA8CIsAAAAAeBAWAQAAAPAgLAIAAADgQVgEAAAAwIOwCAAAAIAHYREAAAAADz80
+AQAAqVwuF40AABWbpmn1NbvDIh0BAKDGzg3n0T8EgD7sCot0BAAAmDNNUwj6iwBQlS3fzIduQ7vd
+blobAMjuer1qhKZ6o4IiAGiZOYsAAMji0w+LAHC6jx0/unkaGgAAAAAPwiIAAAAAHoRFAAAAADwI
+iwAAAAB4EBYBAAAA8OBpaAAAFDf3ZJa5J6htef3za5eeyDb3urWnxsQuM/V7jmxX7Dr3HIMUbfj6
++qXjurZ977Zja1vuaVOAnqgsAgCgqKWB+rt/2/r6s7Z/z3aesf0x+1fjdgFQjsoiALpyfRng3J5+
+Fb7/2+3NL8Xv/m1pWa/veX7t/XXXN4OtuWXs+fe59c/t45H2erd/Mdu/9XX0b63q5zWkWHr9/d8+
+rtfFapOY9byz9L7X5e7ZzqVKmT2VP3ts2cc966+1MmfuGKkkAvhFZREA3XgON94FNnMhzlJQNLes
+1/ffX/f62ue/fw1d3r3m9d/nlhu7/rX22rv8LW20d/voT8ztYbEBzNJrS4YMubbzzNCidLs+BzX3
+datsAjiXsAiALrwLfPYGE1uXtaVK5l2YNLes2OXurdI5svwtbaSKiFdbg5Cl18f821y1UupAZu92
+1njblwobgLG5DQ0AZqSofjkSnOSuvsmxf2fsB5SUMtT5vN2+LC82xNoziXaJNthyO11MBdHS7YUA
+5CUsAmAo91u97rdGLc1jdKQi5t08QiH8uSVrTcwcSkekWv7avuTeD1hzD2TuwcOWqqIS8wa9C01G
+nD/neV9fQzQAyhMWAUAma5NVA23KEeLMhUZHJ5g+e/9jXyscAqiLOYsA6MK7+XLW5gWK/fdnsYHP
+2uvWJtveu969ti5/bxsJzNgTDOx5JP2z1yAmNsC4T7j8+ifXdj6vs7VjlGsdQiSAc6gsAqAbz7eY
+Pf9dqmVtWd7cbWivE0LPbe/rv80tL1Vb7Vl+TBvl3g/a8nx70dIj7e9/v/b6mKer1bBfc9tZ65w8
+pdt1bh1zQdFaGwNw3GWapmnzmy6XQx1wAIAt7gHTjm4LJTuWv/uI084QYC482Pv6LfMSvXtc/Nag
+pNR+xb7+yLYeXX9MG669ZunYpN7mEeeJAsZx/4y7/P7vmP6U29AAAChq6yPm9z6S3n7t34/c648J
+Z97N49TKuQDQOpVFAED1VBY10rGMrCwCAMpRWQQAAADAIcIiAAAAAB48DQ0AADqSciJsAMYkLAIA
+gI4IgwA4SlgEAADAZh9/X9/+/ed/t8Ovf37t3PKWXje3rq3LTP2eI9sVs961969t59r2LbX16zJi
+t+Xzv1vyduE4YVHpD9SZsuDnX4COlA7HLD/Ferase2lZW7Zh6/a+vn6pDda27912rK0vVbsCAEB1
+45qFwf3H39dNIcm715fY/rWQKsV7Wj5me93Dn6VlxgZKnEdYVPLiXAgTPq7X6BBh7rWpln/kPWv7
+LigBAIDGxzUrVT+vocTS6+//thYs7A1plt73utw927kUeixt3xnhWEybzO13qe0VHtVDWFTq4nwK
+cmKDni2B0NLy7/82F/4srWdPYLRneVvWUWvgNNfuAjIAALoZ10TcHhYbwNz/LiYwStpvf3PbU47t
+zL0v727/WqvqijlmEEIIf2mCAh+oK0HR0UBhbflbbuVKsT1ry4vdhhRt/nm7PdZdYr0AADCCreHC
+0utj/m0u3EkdcuzdzntQ09MxS7Gud23iFrQ2qCwqeXFmrjBZWv7n7XZ6WFLDNgAAAGNLGeq8Vilt
+ndz53fKO7sMZc0DlPjaCpfKERTVfKBsmqy617hr2de21qeduAgAAzvM6YfKWypQS8wa9q6IpVT3z
+vPyYp4pBLGERu55i1sSXytO2q2oCAAAe44MMIc5caDQ3B1KSsVzF4dC7p6KthWgqiOohLKr5A2zj
+RNW511/LurY8NQ4AAEhv661OMY9RXxwDPAUP9/+OGjtsDB+ObufzOnMFOTHLnZvoWhhDLBNcl/xA
+PRherIUka7dfLS333Z/a9j/VOoRIAACwc0wy86SzL/3tmadvLU12/Pra2vZryz6V3OZ3f44eMwhB
+ZVGZi/jpFqi5qqAj1UJry495Gltupbdhbh1zQdFauwEAAL/72i+PkU/x+hoeRb93O/fMi1R6Iuet
+xyz1emNDQRNc10NYVOoieQl0jnoNN2KWXyoo2jMH0lnbfKTdzm5nAAA4bXyzMJnyXHVLC0FA7fsV
+cxveu7mCWjoG1EFYVPKDZ2GS5diAYW0ZtQYYJZ/gtrSuexs9h201txsAAFQ7vtkYMGx5/dHXHgk/
+atmvI+9PNYF0ioqvGqrG2O4yTdO0+U2XSwghhJuBNABQwPV3qL+j20LJjuXvPuL9KPnRBWCbtVvE
+hCrsOq9+96Muv/87pj+lsggAAKDFAeBLsCBIaJ9jSC2ERQAAAB0QHgGpCIuI++JZmZRbmTkAAFTW
+h98QHn1cPzQYFPR5+6x6+4RFRJ7IN40AAAA19dGfwp+Yx6HHPr4cQFgEAADQuNfwZy08inkEOzAu
+YREAAECjYiqKdvl50bg04Ujg+Xr7Ze5bw1q63VNYlPzgXzUCAP13zNyeDJB/bJErCAKKB0WtERYB
+AACcNWA9IRBy6xnDX3eColXCoowUbgLQk0kTAMQPRguFQItPOHuzDXuCoss/jieV9Ul+Hrg2TwqK
+WnvioLAIAABgy6CvgiBoz/apKGL4a1dQFE1YBAAA8DywK3hrWOoAJ1U1EXR3XQuKNhEWAQAAYwwW
+Gw6B9u6foAgERXsIiwAAgLYHgoUnia4tgBESwcL1UUlQ9Hn7bCo8EhYBAAB1DvJOenR860GLoAh+
+f4ZUFBS1RlgEAACUH8R5ZLx9hJyfMYKiQ4RFAABAuoGSEMj+w9mfQ4Kiw4RFAADA+iBICAS08Fkl
+KEpCWAQAACMPrMwLBPTyeSYoSkZYBAAAPQ6ahEDASJ95gqKkhEUAANDaoMgtYQB/PhMFRckJiwAA
+oJYBjxAIYNvnpqAoC2ERAADkHlQIgQDyf+4JipIRFgEAwN4Bg3mBAKogKEpLWAQAAK+DASEQQDME
+RekJiwAAGIpbwgD6ISjKQ1gEAEAXhEAAZPl+GSwoCkFYBABA7Z10IRAAZ30HDRgUhSAsAgDgrA64
+eYEAqPl7atCgKARhEQAAR/17CSGEMP186WSHa9HNEAIB70zTNMy+Xi4XBzyRkYOiEIRFAAAs+ff8
+gYcQCICSRg+KQhAWAQCMSQgE0J25KioVR/EERb8IiwAAenJGCPS/6ctgZHp0sG+OB0AFXkMk4dF7
+gqI/hEUAAC04qxLof5O2B6B7gqKvhEUAAGcSAgFQ2HOlkSojQdE7wiIAgFxOvCUMAFgnKHpPWAQA
+sJUQCIBOjFxlJCiaJywCALgTAgHAEARFy4RFAED/zAsEAKvuVUa9VxgJitYJi6DmD+uf7//+8s/6
+a969ds/yU6xn636uLWttu9e2dakdX5cRuy2Xf/K2ETBDCAQAbHBWUPS63toJi6BSS8HD9DM+eJh7
+barlH3nPme2y5h7+LC0zNlACdnaq/r5+v/Zzh0NCIADotsJIUBRPWAQ1fjg/BSKxQc+WQGhp+fd/
+mwtJltaTOzCKbZe5fSoV6giPYKXD9BQCFSMEAoCx+x+Cok2ERVCZtUBk6e9TLP/5dqrY8CfmFqy1
+7Xm+/evdenO3C5CgMyQEAoC+xibT1EV1kaBoO2ERVCp38LG0/CPhT+vt8q4dlsIrARVDdBTffB58
+hGv29X7+d3v8/+v1+ui0AgDEqiUo+rx9NhUeCYug48FcCOfPI7T3faXmQOrtWECJa/eo5xAIAKi8
+v9Dw/EU1BUWtERYByQaXe8OQ5/fVXNUEvVyruQiBAIBaCIqOERZBJ7ZOVJ17/bUParfs1+utaGu3
+oKkgIqczrpfHuf+l43NzMABgpD5IQ/MXCYqOExZBxQPCI6HDWoVOzCPhlwaNJQa8c3MFCWPo9Zov
+zbUEAPRGUJSGsAgqE/M0siOBydryY546VmKw+jpwzt0ukMtZlXOuBQAgeb+m8uoiQVE6wiKo0Gsw
+kmKwOjcvUEuTMadul63rjQ3STHA9SGdJCAQAUA1BUVrCIqjU0m1ksYPFtWWcFWrEPHZ+7rH1Z243
+43BLGADATD+pwuoiQVF6wiKoWMzgce01a4HMGQPZLWFXim3J3Y4G+w11boRAAABdERTlISwCoHlC
+IACAgn2v6dczUmurMBIUpSMsAqDejoh5gQAAiCAoSktYBBQf4BuIIwQCACAVQVF6wiLAgJyk3BIG
+AEApgqI8hEUARBECAQDwpX9Y4ZPRchgtKApBWATgS14IBAAAb40YFIUgLALolnmBAADI3ufsuLpo
+1KAoBGERQHtfyEIgAADIauSgKARhEUBV3BIGAEBzfdjOqotGD4pCEBYBlPkCFQIBAED1BEW/CIsA
+DhACAQCMpbYKmmmaqtmO1quLBEV/CIsA3n3ZmRcIAACGISj6SlgEDEUIBABAT16reWqpNGqJoOg7
+YRHQDbeEAQAAWwiK3hMWAdUTAgEAQGQ/9qnSqHSVUWvzFgmK5gmLgNMIgQAAgDMIipYJi4DkzAsE
+AADnu1f5mMfoK0HROmEREE0IBAAAtOysoOh1vbUTFgEhBLeEAQBAr0pWGNU8b5GgKJ6wCDonBAIA
+AEYnKNpGWASNEgIBAACb+vODzmEkKNpOWASVMS8QAABAGrUERZ+3z6bCI2ERFCIEAgAAanC5XLJW
+F9Uyb1FNQVFrhEWQ+oOxUCgkBAIAAHaPJzIHRmcTFB0jLILaPrSFQAAAALsJio4TFkEhQiAAAKCq
+MUqH1UWCojSERZD6A1coBAAAUJygKJ2/nE4AAABASqUrlgRFaaksghQfhD+1Af1QHQcAQEsERemp
+LAIAAIBB1fCI+yMERXkIiwAAAIDmCYrScRsaJOYWHlrkVkoAgIHHMB08FU1QlJbKIgAAAKBZgqL0
+hEUAAABAkwRFeQiLAAAAAGaMFhSFICwCAAAAeGvEoCgEYREAAADAN6MGRSEIiwAAAGB4l8sl+TJb
+fsLayEFRCCH8cEkAQJkOTo5OGAAAaY0eFIUgLAJgcCV/8VpalyAJAOB8gqJfhEUADKPmUuh32yZA
+AgAoR1D0h7CIrgduBlp9DqqdM4xyHj9vv3MTACAfQdFXwiKAmcH5K4P19o9hT/vlfAQASENQ9J2w
+iO4HjQZUGKyPeXxG2V/nIQCQyuVyGa5PJSh6T1iEgR0kOIcN2H2OOA8BANoiKJonLAIwYG+6vfne
+Ls5BAIBlgqJlf2kCeh/oGVRyxvntvNO22gkAoE6ConUqiwAyDthDUOWRsi1xDgIAHHFWUPS63tqp
+LAIoMGAXdhxrP5yDAABHCYriCYsYYuBnkIQBu/ZCmwIA4xIUbSMsAjhhwI42Ort9tTEAMApB0XbC
+IoYZABoY4Vpoo120jfMQACCVWoKi1ibRFhYBGKhrD+0OANAdQdF+wiKAkwfqBusCCwAA0hIUHSMs
+YqjBoAEp1Pe54LoEACAlQdFxP5xGAOebpilcLpfh9rkVKY6NUAwAID9BURrCIoBKjBQY1Rqc5Gz/
+uWULkQAA0hAUpSMsYriB4YgVHLR1rfR+ftb0eVBDW79ug/AIAGA7QVFawiJgqIH5O7UNznsOjGpo
+69rb9nn7BEcAAOsERekJixhuIN77YJxjg3OD9D4/C1q93gVHAADLBEV5CIsAKhyk9xZonhV09NSG
+giMAgGWConSERQCRg3QD9PaOmXMSAGAMgqJkHc0Qpin85ZQip5oHMgZZ7BmglwwhejlHS+/HSLeY
+lj4nAQBqJChK2nkPIQRhEW0NisAAvbXvmslxse8AgDFcNoKiPIRFGMhCxV9+LZ+jpYMitAMAQA6j
+BUUhCItoZKB4HwAZCGFwPt71v9b+joE2AQDa6sO1ZMSgKARhEUCSwTnaXfsAAPRl1KAoBGERmbSU
+SEvPcY62t72CkPh20lYAANuNHBSFICyikcGOQSKtnaejEhQ5PwEAWjd6UBSCsAjAgFwbD9N22g8A
+YJmg6BdhEcnlmNi6pW0G134egg7tCACQk6DoD2ERBjuAa157AgAMTVD0lbCIpFqu0FFdRM2D8NrP
+z5zbJ9jQrgBAe/25lvoagqLvhEU0O5Ax0IE+OxbU8zkLANA7QdF7wiIAqiXM0MYAALkIiuYJi0im
+xYmtc+4DBt+ue+0IAECdBEXLhEUYlAMAAAxstB/NBUXrhEUAVNepEAQDAJDDWUHR63prJyyiukHj
+1kFi6kGlW9HgXIIiAAD9uRwERfGERQAAAEDXBEXbCIs4rMdKHNVFcM41oqoIAMDYJzVB0XbCIqqy
+d6BogAkAAMCrWoKi1ibRFhYBsImqIgAA/boW+nSCov2ERVTz4VLbQNGtaAAAAG0SFB0jLKIbqhLA
+9QsAQJyefxwXFB0nLIJBP0BpSy1himsCAICaCYrSEBZRxaAx1UBYdQK9XRsAANBKf/Xs8ZigKB1h
+EQCnEvICAHCUoCgtYRG79Dyxdc59Bdc9AABn9ud67NMJitITFtEdVQoAAABjEBTl8cOpBZBOjl9q
+eg5AhbsAAG32UWvs1wmK0lFZxKkfNLk+UFIv1+03AAAA9RIUpaWyCCCRnkNFgSkAgD7cnLOrigRF
+6akswoDRvlMxt2kBAMA8QVEeKovodhB8uVwEPBTjXKvvMwAAQL9Uny6F0YKiEFQWAVT7hSxMAQCA
+c40YFIWgsoiTBsSlBsGpq4umaTKAJ9t1AQAALfVHex8bjRoUhaCyCKDKL+aavngFYgAAjGbkoCgE
+lUUAmwlPjlOhBwDoC+rP1Wr0oCgElUWc8IFY+kMl9fp8OYx9HZQ4/oIUAAA4h6DoF5VFACtKBoSC
+IgAAatdrn1VQ9IewiKID5V4+VEx07bz3pQsAAP0QFH0lLGIIqZ+KRl9qODcERQAAtDK26o2g6Dth
+EVCMwG6cL1wAAGiBoOg9E1xTbHB/9oDYRNfUSFAEAEAr/dbe+q6ConnCIoATv3BrJxQFAKBHgqJl
+bkMDKGz0aiLVVAAA+m5nEhStU1nErB6fguZWNM4+/wQlAABwnrOCotf11k5lEUBmAiIAAPRjzyco
+iqeyiLd6rCrKtT2qi5g7z1QSAQBAHQRF26gsAjhIIAQAgL5tvQRF26ksAjhomqYvfwAAgDrUEhS1
+Nom2yiLeDnxTqTWVvlwuBvUUuYZUHQEAUKve+6qCov2ERQAZCY4AAGihr9pbf1VQdIzb0Fj8sDjC
+wBi+X18q2gAAIC9B0XHCIoYlzOIsQiMAAGrup7bcVxUUpSEsAjjxyxgAAEhDUJSOsIgsA9dWqnZU
+F1HDdSc0AgBAP/UYQVFawiKASr6MAQCA7QRF6QmLACohMAIAoMY+as39VEFRHj+c+qQepLZ2a9fl
+ckm6/9M0ub2t4XPj7C9C5w8AAOwjKEpHWATw5F1QUzpAEhgBAFCbe5+41n6qoCgtt6ExdFVRru12
+O1FfLpfL40+L1yUAAPRMUJSesAhgg5LBkcAIAIDa1NZHFRTlISwC2KlEaCQwAgCAc40WFIUgLBqe
+W9Dybb9B/jgERgAAjDaOHKWPOmJQFIKwCCCJ0nMaAQAAeY0aFIUgLCLhQBnIdy2oLgIAoDY991FH
+DopCEBa5sMk60NfGzqPWz6cc++K6AACgZqMHRSEIiwCyUG0HAMAIevshUFD0i7DIBW1QnHl/VFHg
+fAIAgPoJiv744XQAyONyuQh3AIDmTdOkavqlj1fzsXKO7CMo+kplEUBjnQkBFAAApCMo+k5YNCC3
+oJXfL4N7AACgxDjm+U+r48ySBEXvCYsACnxp+zIGAIC6CIrmCYsGo6rovP0zuAfXAwD47qb0mKZk
+lVFL54mgaJkJrvGFAax2MlzvAAD0QlC0TmURQAGeIAIAwNn90RJVRrX/yHhWUPS63toJiwaiMsAx
+wPkEAACjEhTFExYBcAphFwDAOXJXGNXYzxMUbSMsAgAAALolKNpOWDQIv+A7Fpyv5XmLzLkEAOjH
+6p+2eL7UEhS1Nom2sAgAAADojqBoP2HRAPwC4JjgXLL9AAC8U+IJaWcQFB0jLAIAAAC6ISg6TlgE
+QBTzFgEA6OttcUYVuaAoDWFR59zi4diAawEAgBEIitIRFgEAABDFjzx9a7m6SFCUlrAIgFM7EAAA
+cISgKD1hUcek/o4RuBYAANiitR8HBUV5CIsAAACA5gmK0hEWdcqv9I4V5JLr1ybXAgDov+Kc2UtQ
+lJawCAAAAGiWoCi9H04rYpjU9iu/puAz4ZLlOpimyecNAECnfb0cBEV5qCzqkCDDMcNxBgAA0hgt
+KApBWEQEv/IDJQnVAACMA2sxYlAUgrDIIItqPjgdO1wHrgcAMO6AeowaFIUgLAJoml98AAAgvZGD
+ohCERRiIahuK6PXXN9VFAAD01rcbPSgKQVjk4sMxBNeENgYAIIQgKLoTFjFL5Qzgs6JvgiIAfI/A
+H4KiP4RFYJCMjpT2064AAEMTFH0lLNLpx7GkUTWFlbm3xXWhPQEAchEUfScsovpBKBiU+9wYrS21
+IwBAGYKi94RFOv5UOEB2TF2baNMcbaf9AICzxzo1ERTNExYB+OJuarsEHtoMAOAoQdEyYRHNDELB
+4NxniPbVVgD4nsH5cpSgaJ2wyMWGY4tjp507bR9tBADw1VlB0et6aycsAkg8QM+theq/UtsoENEm
+AACxBEXxhEU0NwgFA3SfJ+/aH+0AADBHULSNsMigAMeYho5Ta4Fu6cBo1GtGWAkAME9QtJ2wiGYH
+oWCA7rNl7rg4BwEACKGeoKi1SbSFRQ0PEHCsOW9wfsZxEehuP072DwD0Vxm3Dyoo2u+HUx+g/g5Q
+60HR5XI5pR3v6+whaNMRBwCIJyg6RlhENwMpMCCv/3PmrPZ9Xm9rn3fOSQCAbQRFxwmLDGZpYEA8
+TZPKiMHPKddHnvOwxrZ1nQAA7CcoSkNYBFCxHqv+agiM7l6344z2Fg4B0INeftyk7XNFUJSOsAgf
+6uDaPGXfagxJ5rYpxbEQCgEA5CMoSktY1BiDjXEHwn6tGe8ccp347AUAYJ2gKL2/nFYGpIDr8sx9
+9TkEAMBegqI8hEUN8cu2Ab9zwHljv9H2AADvCYrSERYBGLTbf20OANA0QVFa5iwySABci1W1hQo6
+5xwAwBaCovRUFjXC4MmAzLngHBmpTbSLcw4AIIagKA+VRQAG7FW3kYDUOQcAcKbRgqIQVBY1IcdA
+yaDBOcF5A3bXn88r5xwAQBtGDIpCUFkERQZqwh0M1tO0n2vJOQcAUMqoQVEIwiIAA/YG21No5JwD
+AMhp5KAoBLehVc8taAZvJc8N0h1vt/6UaWO0CQB9j13gDKMHRSGoLAJINlDn3HYfsYPqvAMASEtQ
+9IuwyMACcB11dVxGCI2cgwAA6QmK/hAWVUwZZ3+Du9THdJomg0aDcRaOXS+fo85HAIC8BEVfCYsM
+DnBMnX8Mc821FB65BgFokR8zaZGg6DthEaT+gvypDaBW7zqvNQRIOtUAAOcQFL0nLAJgaEtBTcog
+SSAEAFAXQdE8YREAzBDwAAD0SVC0TFgEKQaU//z637lb0O7/DgAAwLkEReuERVBAzDxGAiUAAIC8
+zgqKXtdbO2ERVGItUBImAQDQRL/WE9G6O569EBTFExZBQnOBToonpKlOAgAA2EdQtI2wCAqICXEE
+SgAAAOkJirYTFkEl1kKcFGFS7HIESgAAHOpzuhWNStQSFH3ePpsKj4RF0IhS1UkxyxEmAQAAtasp
+KGqNsAg64nY3AACg6jFLoYozQdExwiIY7cPZ7W4AAEDHBEXHCYuAL2q63S12ewAAgPSmaWpumwVF
+aQiLgM3MnwQAANRGUJSOsAjIwvxJAABj80Q0ShIUpSUsAk5j/iQA8i3Z/QAADThJREFUAOAoQVF6
+wiKgWm53AwAAlgiK8hAWAU1zuxsAABCCoCglYRHQPYESAAD0TVCUlrAIIJg/CQAAWiUoSk9YBBDB
+/EkAADv6NZ6IxnM/NsO5ICjKQ1gEkOrLz+1uAADQndGCohCERQBFCZQAAGjBNE0aIYwZFIUgLAKo
+jvmTAADgfKMGRSEIiwCaY/4kAKAl5i1q85iNbuSgKARhEUCX3O4GAAD7jB4UhSAsAhiW290AACjW
+92ykukxQ9IuwCID3X+gV3e4Wuz0AALCXoOgPYREAu5k/CQCgL6POVyQo+kpYBEBW5k8CAKBmgqLv
+hEUAnM78SQDQN09Ea+c4jUZQ9J6wCIDqmT8JAIDUBEXzhEUAdMH8SQAAB/o3g1UVCYqWCYsAGIb5
+kwAAEBStExYBwBPzJwEAI1FR9HnKemsnLAKADdzuBgDQJkFRPGERACTmdjcAePO95YloVR6TIn2j
+Co67oGgbYREAnECgBABQhqBoO2ERAFTK/EkAQA4jzVNUS1D0eftsKjwSFgFAo86cP+kjXL92gP67
+OSAAQFVqCopaIywCgI6VCpQ+/r6uvkagBIB5i85t+1P6Iicdb0HRMcIiABhcqdvdBEoAQAmCouOE
+RQDAonuYNH3p/Ny+do4igqCoTtbMch6B1b+XEP43OSgAEOHsuYnOqCoSFKUhLAIADoupCEoVKIV/
+VzqewiQAGJKgKB1hEQBQRLFA6d+IXzEFSgB0aKSnnH3rQwiKkhIWAQDVmAuUrtfrr05wovmTBEoA
+0A9BUXrCIgCgHTEBzr+J5kcQKAGEEH7NO5OyYqX1J6KNXL2z9bwpQVCUh7AIAOhLTYGSMAkAihEU
+pSMsAgDGUypQUp0EwIDOqBwTFKUlLAIAeGctxHG7GwBUQVCUnrAIAGAPt7sBwDelq4oERXkIiwAA
+cnG7G9BRAGCSa2LOkx6NFhSFICwCADiXQAkAqjViUBSCsAgAoH7mTwKgcj1WFY0aFIUgLAIAaF8l
+8ydNP0O4/ONwANC+kYOiEIRFAABjKBQoTT+fOtrhGvWez/9ujg80wLxFLJ0bPRk9KApBWAQAwF2p
+291eO+V/X1dfI1ACoARB0S/CIgAA4qyESZfL5UtlUdLOu0AJoEo9VRUJiv4QFgEAkG7Q8E8I06OT
+fYvrnEcEQSmWI0wCYPY7RFD0hbAIAIBTxYQ4KQIl1UkA6ago6puwCACA6q2FOKWqk2K2BYB2CIre
+ExYBANC8UtVJscsRKNErT0Tjfh70QFA0T1gEAMAQagqUhEkA5xIULRMWAQDAfbBg/iSAWSqKxiEs
+AgCADcyfBNCus4Ki1/XWTlgEAAAJud0NtjFvUf1UFKVdbwuERQAAUJjb3QDKEhRtIywCAIAKCZSo
+VeonolH3se6BoGg7YREAADTK/EkAK59flQRFn7fPpsIjYREAAHTK/EnAXj1UFdUUFLVGWAQAAANz
+uxvQI0HRMcIiAABgkUCJV6nnLfJEtHqOaw8ERccJiwAAgMPMnwTUQFCUhrAIAADIzvxJUKeeKroE
+RekIiwAAgCq43S3xAPZpPwVk9E5QlJawCAAAaEYNt7u1GLx8/H0VGNHtvFCCovSERQAAQDdKVCe1
+WpkkMKJHgqI8hEUAAMBQSlQn1TBv0ud/t2/bkTIw8kS0Oo3choKidIRFAAAAzwO/CsKkmO2I3Zec
+gRFUc90KipISFgEAAGwZlJ44b9KekCdnYNRCFYtqpQGuSUFRcsIiAACAlAPXjPMm7b29TYUR3V5v
+gqIshEUAAAClB7iZAqWt74kJjKafjhdjGy0oCkFYBAAAUKV3IU6qW9y+L3PS4PDu+hgwKApBWAQA
+ANCMUvMlAeMGRSEIiwAAALqR6va2PXMZnTWwtl7r7Wm9tRAWAQAADCBn1ZEgwXqtty/Coozc9QsA
+AJwt5glqHwb01mu9p663NsIiAACAzsQERAb01mu9day3RsIiAACATpQKiUYc0Fuv9Y5EWJTY5+2m
+EQAAgHrGKAkDolEH9NZrvaMRFgEAAHQoR0g04oDeeq13RMIiAACATuQKiEYd0Fuv9Y7qL00AAACA
+Ab31Wi93wiIAAAAM6K3XenkQFgEAAGBAb73WW3C9tRMWAQAAYEBvvdZbaL0tEBYBAABgQG+91ltg
+va0QFgEAAGBAb73Wm3m9LREWAQAAMEuQYL3W2856UxEWAQAA8JYBvfVabzvrTekyTdO0+U2XSwgh
+hNvt5tMTAMjuer2GEELY0W2hZMfydx9xenSO9RWhFS3fLgMtKhkgffzuR11+/3dMf0plEQAAAAAP
+wiIAAAAAHn5oAgAAgLG1OKcKkI/KIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwYIJrAAAAivq4
+frz9+7mJtre8/vm1SxN3z71ubl1bl5n6PUe2K3adW4/DWvsfPb5737PlmJrc/T2VRQAAABSzNHB/
+929bX3/W9u/ZzjO2/+gxOrrcrcve856alt8qlUUAAAAUsVb18zpoX3r9/d8+rh+L1Sdbq19itu91
+uXu28/73qapz9tiyjyWWneo9Z+xvb1QWAQAAkF3M7WGxAczSa3Pac9vbnu08M7RYu+3r8/b5eM3W
+dj/aFjmO8xnnUQuERQAAABSzNQhZen3Mv81VK6UOZPZu52i3Qe1p99zhmYqi79yGBgAAABFShjqf
+t88vy4sNsfZMon10H9fmYzozbMndHqMSFgEAANCleyBzDzS2VBWVmDfoXfVTrsqnFPv4/HevYRd9
+ERYBAABApBwhzlxodHRC59T7WGM4pIIoD2ERAAAAxWy9bWntaWdrnquL7v8dY2sIcXQ7n9d55oTd
+e7Z9yzHds2+520OF1HcmuAYAACC7mKdOzT1ZbG0enVqeHrZlO1sLKO5PQXv9s8WeY5b7ONdyHtVG
+ZREAAABFPM9zs6UqaOn1MQP8Ek/T2rOde+ZFamVC55T7lqo9SsxD1QuVRQAAABSz9RHzex9Jb7+O
+i7l1b8utc3uqkfa8p6blt+oyTdO0+U2XSwghhNvtpgUBgOyu12sIIYQd3RZKdix/9xGnRwdcXxEA
+zvbxux91+f3fMf0plUUAAAAAPJizCACA09yrxl7NVbBvef3za5cq4udeN7eurctM/Z4j2xW7ztT7
+eH/t2nGda//YZS7tz1q77DlmAL1SWQQAwCmWBvbv/m3r68/a/j3becb2x+5jDccixTLn9qXm9oc9
+Pq4fi38gRrHKopikvvQvG3vWs+fLxS8yfpEBAOb7DDH9taXX3//ter0u9pP29AvXtu91uXu2c6mP
+d6RftsWWdR89FiXsOWZ7zw+ojcmaSaFIZVGqXx5S/nqzd3v37r9fZAAA1sOGd3+/9votPz6msue2
+tz3bWWvgcsaxOLq81tof4EzZK4u2/mq05XVry1/7ZWPLLw4pvlBTbXcNHQS/yAAAOfoae19/u90W
+K5zvP3jN9V9S9lf2budaFXlpe6uacrRnquW11P4AZ8paWbT1V6PUy6/h1wO/yPjCBQD6kzNcWqrk
+fve61z9792duOTX05e7bkONHyL3tD9CzIreh5f6CWftlo9aORMntzn1Puy9XAKBmr2HDliqSEkHK
+7XYTWpx8fmh/gD9+1LhRZ06SfOQLodQEhEe+BN+VYKdc9mtbqCoCAHqVo5/zroJmy5QKqfclV9+x
+tr7snvYH6NmPkXe+9nCn1Q6T0AgAiO2LbekjrD3tLKav8lwtErvuPU/KPbKdc/2qVo5diW0+crtd
+D+0PkNtfNW7UvQz0tRz0zKdb7Nnu5+2v5YumxPbMlfECALz2tbY+DGTtCbO1PBxky3a21E86eiy2
+PiE4VT+9l/YHKKVIZdHR0s21JyDs/WWjhvmM/CIDAIzouX+3pSpo6fUxfbsSc2nu2c49fdaUUzds
+DWy27mOq45dif1K1P0DPslYWbf3VKPXya3uKQ6rt9osMANCDrQ/7qPmhJr3u17uK8b3bnGo/j94F
+0Op5BVDSZZqmafObLpdNH55rQcJrBcrWx83HLv/19ak+/Pc+Qn7rdqfc19flbA1+UuwLAGz9rt3R
+baFkx/J3H/F+lD59/wPA6T5+96Muv/87pj9VZM6iFGn93mXU8uQGv8gAAAAALShSWQQAcITKokY6
+liqLAKA6eyqLfmg2AADoj2kCANhLWAQAAB0SBgGwl7BohV9kAAAAgJEIi1YIgwAAAICRCIsAAMji
+Y6VCGwCo01+aAAAAAIA7lUUAACR10QQA0PZ3+TRN0+Y3XXQBAIDydnRbKNmx1EcEgC76UyqLAAAo
+1vkEAOq3KyzSEQAAAADokwmuAQAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAe/g/10lQlA3JSSwAAAABJRU5ErkJggg==

linux-imx/Documentation/DocBook/media/v4l/biblio.xml

diff --git a/linux-imx/Documentation/DocBook/media/v4l/biblio.xml b/linux-imx/Documentation/DocBook/media/v4l/biblio.xml
new file mode 100644
index 0000000..d2eb79e
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/v4l/biblio.xml
@@ -0,0 +1,269 @@
+  <bibliography>
+    <title>References</title>
+
+    <biblioentry id="eia608">
+      <abbrev>EIA&nbsp;608-B</abbrev>
+      <authorgroup>
+	<corpauthor>Electronic Industries Alliance (<ulink
+url="http://www.eia.org">http://www.eia.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>EIA 608-B "Recommended Practice for Line 21 Data
+Service"</title>
+    </biblioentry>
+
+    <biblioentry id="en300294">
+      <abbrev>EN&nbsp;300&nbsp;294</abbrev>
+      <authorgroup>
+	<corpauthor>European Telecommunication Standards Institute
+(<ulink url="http://www.etsi.org">http://www.etsi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>EN 300 294 "625-line television Wide Screen Signalling
+(WSS)"</title>
+    </biblioentry>
+
+    <biblioentry id="ets300231">
+      <abbrev>ETS&nbsp;300&nbsp;231</abbrev>
+      <authorgroup>
+	<corpauthor>European Telecommunication Standards Institute
+(<ulink
+url="http://www.etsi.org">http://www.etsi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ETS 300 231 "Specification of the domestic video
+Programme Delivery Control system (PDC)"</title>
+    </biblioentry>
+
+    <biblioentry id="ets300706">
+      <abbrev>ETS&nbsp;300&nbsp;706</abbrev>
+      <authorgroup>
+	<corpauthor>European Telecommunication Standards Institute
+(<ulink url="http://www.etsi.org">http://www.etsi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ETS 300 706 "Enhanced Teletext specification"</title>
+    </biblioentry>
+
+    <biblioentry id="mpeg2part1">
+      <abbrev>ISO&nbsp;13818-1</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>), International
+Organisation for Standardisation (<ulink
+url="http://www.iso.ch">http://www.iso.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-T Rec. H.222.0 | ISO/IEC 13818-1 "Information
+technology &mdash; Generic coding of moving pictures and associated
+audio information: Systems"</title>
+    </biblioentry>
+
+    <biblioentry id="mpeg2part2">
+      <abbrev>ISO&nbsp;13818-2</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>), International
+Organisation for Standardisation (<ulink
+url="http://www.iso.ch">http://www.iso.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-T Rec. H.262 | ISO/IEC 13818-2 "Information
+technology &mdash; Generic coding of moving pictures and associated
+audio information: Video"</title>
+    </biblioentry>
+
+    <biblioentry id="itu470">
+      <abbrev>ITU&nbsp;BT.470</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-R Recommendation BT.470-6 "Conventional Television
+Systems"</title>
+    </biblioentry>
+
+    <biblioentry id="itu601">
+      <abbrev>ITU&nbsp;BT.601</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-R Recommendation BT.601-5 "Studio Encoding Parameters
+of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect
+Ratios"</title>
+    </biblioentry>
+
+    <biblioentry id="itu653">
+      <abbrev>ITU&nbsp;BT.653</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-R Recommendation BT.653-3 "Teletext systems"</title>
+    </biblioentry>
+
+    <biblioentry id="itu709">
+      <abbrev>ITU&nbsp;BT.709</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-R Recommendation BT.709-5 "Parameter values for the
+HDTV standards for production and international programme
+exchange"</title>
+    </biblioentry>
+
+    <biblioentry id="itu1119">
+      <abbrev>ITU&nbsp;BT.1119</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union (<ulink
+url="http://www.itu.ch">http://www.itu.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-R Recommendation BT.1119 "625-line
+television Wide Screen Signalling (WSS)"</title>
+    </biblioentry>
+
+    <biblioentry id="jfif">
+      <abbrev>JFIF</abbrev>
+      <authorgroup>
+	<corpauthor>Independent JPEG Group (<ulink
+url="http://www.ijg.org">http://www.ijg.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>JPEG File Interchange Format</title>
+      <subtitle>Version 1.02</subtitle>
+    </biblioentry>
+
+    <biblioentry id="itu-t81">
+      <abbrev>ITU-T.81</abbrev>
+      <authorgroup>
+	<corpauthor>International Telecommunication Union
+(<ulink url="http://www.itu.int">http://www.itu.int</ulink>)</corpauthor>
+      </authorgroup>
+      <title>ITU-T Recommendation T.81
+"Information Technology &mdash; Digital Compression and Coding of Continous-Tone
+Still Images &mdash; Requirements and Guidelines"</title>
+    </biblioentry>
+
+    <biblioentry id="w3c-jpeg-jfif">
+      <abbrev>W3C JPEG JFIF</abbrev>
+      <authorgroup>
+	<corpauthor>The World Wide Web Consortium (<ulink
+url="http://www.w3.org/Graphics/JPEG">http://www.w3.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>JPEG JFIF</title>
+    </biblioentry>
+
+    <biblioentry id="smpte12m">
+      <abbrev>SMPTE&nbsp;12M</abbrev>
+      <authorgroup>
+	<corpauthor>Society of Motion Picture and Television Engineers
+(<ulink url="http://www.smpte.org">http://www.smpte.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>SMPTE 12M-1999 "Television, Audio and Film - Time and
+Control Code"</title>
+    </biblioentry>
+
+    <biblioentry id="smpte170m">
+      <abbrev>SMPTE&nbsp;170M</abbrev>
+      <authorgroup>
+	<corpauthor>Society of Motion Picture and Television Engineers
+(<ulink url="http://www.smpte.org">http://www.smpte.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>SMPTE 170M-1999 "Television - Composite Analog Video
+Signal - NTSC for Studio Applications"</title>
+    </biblioentry>
+
+    <biblioentry id="smpte240m">
+      <abbrev>SMPTE&nbsp;240M</abbrev>
+      <authorgroup>
+	<corpauthor>Society of Motion Picture and Television Engineers
+(<ulink url="http://www.smpte.org">http://www.smpte.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>SMPTE 240M-1999 "Television - Signal Parameters -
+1125-Line High-Definition Production"</title>
+    </biblioentry>
+
+    <biblioentry id="iec62106">
+      <abbrev>IEC&nbsp;62106</abbrev>
+      <authorgroup>
+	<corpauthor>International Electrotechnical Commission
+(<ulink url="http://www.iec.ch">http://www.iec.ch</ulink>)</corpauthor>
+      </authorgroup>
+      <title>Specification of the radio data system (RDS) for VHF/FM sound broadcasting
+in the frequency range from 87,5 to 108,0 MHz</title>
+    </biblioentry>
+
+    <biblioentry id="nrsc4">
+      <abbrev>NRSC-4-B</abbrev>
+      <authorgroup>
+	<corpauthor>National Radio Systems Committee
+(<ulink url="http://www.nrscstandards.org">http://www.nrscstandards.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>NRSC-4-B: United States RBDS Standard</title>
+    </biblioentry>
+
+    <biblioentry id="iso12232">
+      <abbrev>ISO&nbsp;12232:2006</abbrev>
+      <authorgroup>
+	<corpauthor>International Organization for Standardization
+(<ulink url="http://www.iso.org">http://www.iso.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>Photography &mdash; Digital still cameras &mdash; Determination
+      of exposure index, ISO speed ratings, standard output sensitivity, and
+      recommended exposure index</title>
+    </biblioentry>
+
+    <biblioentry id="cea861">
+      <abbrev>CEA-861-E</abbrev>
+      <authorgroup>
+	<corpauthor>Consumer Electronics Association
+(<ulink url="http://www.ce.org">http://www.ce.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>A DTV Profile for Uncompressed High Speed Digital Interfaces</title>
+    </biblioentry>
+
+    <biblioentry id="vesadmt">
+      <abbrev>VESA&nbsp;DMT</abbrev>
+      <authorgroup>
+	<corpauthor>Video Electronics Standards Association
+(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT)</title>
+    </biblioentry>
+
+    <biblioentry id="vesaedid">
+      <abbrev>EDID</abbrev>
+      <authorgroup>
+	<corpauthor>Video Electronics Standards Association
+(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>VESA Enhanced Extended Display Identification Data Standard</title>
+      <subtitle>Release A, Revision 2</subtitle>
+    </biblioentry>
+
+    <biblioentry id="hdcp">
+      <abbrev>HDCP</abbrev>
+      <authorgroup>
+	<corpauthor>Digital Content Protection LLC
+(<ulink url="http://www.digital-cp.com">http://www.digital-cp.com</ulink>)</corpauthor>
+      </authorgroup>
+      <title>High-bandwidth Digital Content Protection System</title>
+      <subtitle>Revision 1.3</subtitle>
+    </biblioentry>
+
+    <biblioentry id="hdmi">
+      <abbrev>HDMI</abbrev>
+      <authorgroup>
+	<corpauthor>HDMI Licensing LLC
+(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>High-Definition Multimedia Interface</title>
+      <subtitle>Specification Version 1.4a</subtitle>
+    </biblioentry>
+
+    <biblioentry id="dp">
+      <abbrev>DP</abbrev>
+      <authorgroup>
+	<corpauthor>Video Electronics Standards Association
+(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>VESA DisplayPort Standard</title>
+      <subtitle>Version 1, Revision 2</subtitle>
+    </biblioentry>
+
+  </bibliography>

linux-imx/Documentation/DocBook/media/v4l/capture.c.xml

diff --git a/linux-imx/Documentation/DocBook/media/v4l/capture.c.xml b/linux-imx/Documentation/DocBook/media/v4l/capture.c.xml
new file mode 100644
index 0000000..1c5c49a
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/v4l/capture.c.xml
@@ -0,0 +1,659 @@
+<programlisting>
+/*
+ *  V4L2 video capture example
+ *
+ *  This program can be used and distributed without restrictions.
+ *
+ *      This program is provided with the V4L2 API
+ * see http://linuxtv.org/docs.php for more information
+ */
+
+#include &lt;stdio.h&gt;
+#include &lt;stdlib.h&gt;
+#include &lt;string.h&gt;
+#include &lt;assert.h&gt;
+
+#include &lt;getopt.h&gt;             /* getopt_long() */
+
+#include &lt;fcntl.h&gt;              /* low-level i/o */
+#include &lt;unistd.h&gt;
+#include &lt;errno.h&gt;
+#include &lt;sys/stat.h&gt;
+#include &lt;sys/types.h&gt;
+#include &lt;sys/time.h&gt;
+#include &lt;sys/mman.h&gt;
+#include &lt;sys/ioctl.h&gt;
+
+#include &lt;linux/videodev2.h&gt;
+
+#define CLEAR(x) memset(&amp;(x), 0, sizeof(x))
+
+enum io_method {
+        IO_METHOD_READ,
+        IO_METHOD_MMAP,
+        IO_METHOD_USERPTR,
+};
+
+struct buffer {
+        void   *start;
+        size_t  length;
+};
+
+static char            *dev_name;
+static enum io_method   io = IO_METHOD_MMAP;
+static int              fd = -1;
+struct buffer          *buffers;
+static unsigned int     n_buffers;
+static int              out_buf;
+static int              force_format;
+static int              frame_count = 70;
+
+static void errno_exit(const char *s)
+{
+        fprintf(stderr, "%s error %d, %s\n", s, errno, strerror(errno));
+        exit(EXIT_FAILURE);
+}
+
+static int xioctl(int fh, int request, void *arg)
+{
+        int r;
+
+        do {
+                r = ioctl(fh, request, arg);
+        } while (-1 == r &amp;&amp; EINTR == errno);
+
+        return r;
+}
+
+static void process_image(const void *p, int size)
+{
+        if (out_buf)
+                fwrite(p, size, 1, stdout);
+
+        fflush(stderr);
+        fprintf(stderr, ".");
+        fflush(stdout);
+}
+
+static int read_frame(void)
+{
+        struct <link linkend="v4l2-buffer">v4l2_buffer</link> buf;
+        unsigned int i;
+
+        switch (io) {
+        case IO_METHOD_READ:
+                if (-1 == read(fd, buffers[0].start, buffers[0].length)) {
+                        switch (errno) {
+                        case EAGAIN:
+                                return 0;
+
+                        case EIO:
+                                /* Could ignore EIO, see spec. */
+
+                                /* fall through */
+
+                        default:
+                                errno_exit("read");
+                        }
+                }
+
+                process_image(buffers[0].start, buffers[0].length);
+                break;
+
+        case IO_METHOD_MMAP:
+                CLEAR(buf);
+
+                buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                buf.memory = V4L2_MEMORY_MMAP;
+
+                if (-1 == xioctl(fd, VIDIOC_DQBUF, &amp;buf)) {
+                        switch (errno) {
+                        case EAGAIN:
+                                return 0;
+
+                        case EIO:
+                                /* Could ignore EIO, see spec. */
+
+                                /* fall through */
+
+                        default:
+                                errno_exit("VIDIOC_DQBUF");
+                        }
+                }
+
+                assert(buf.index &lt; n_buffers);
+
+                process_image(buffers[buf.index].start, buf.bytesused);
+
+                if (-1 == xioctl(fd, VIDIOC_QBUF, &amp;buf))
+                        errno_exit("VIDIOC_QBUF");
+                break;
+
+        case IO_METHOD_USERPTR:
+                CLEAR(buf);
+
+                buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                buf.memory = V4L2_MEMORY_USERPTR;
+
+                if (-1 == xioctl(fd, VIDIOC_DQBUF, &amp;buf)) {
+                        switch (errno) {
+                        case EAGAIN:
+                                return 0;
+
+                        case EIO:
+                                /* Could ignore EIO, see spec. */
+
+                                /* fall through */
+
+                        default:
+                                errno_exit("VIDIOC_DQBUF");
+                        }
+                }
+
+                for (i = 0; i &lt; n_buffers; ++i)
+                        if (buf.m.userptr == (unsigned long)buffers[i].start
+                            &amp;&amp; buf.length == buffers[i].length)
+                                break;
+
+                assert(i &lt; n_buffers);
+
+                process_image((void *)buf.m.userptr, buf.bytesused);
+
+                if (-1 == xioctl(fd, VIDIOC_QBUF, &amp;buf))
+                        errno_exit("VIDIOC_QBUF");
+                break;
+        }
+
+        return 1;
+}
+
+static void mainloop(void)
+{
+        unsigned int count;
+
+        count = frame_count;
+
+        while (count-- &gt; 0) {
+                for (;;) {
+                        fd_set fds;
+                        struct timeval tv;
+                        int r;
+
+                        FD_ZERO(&amp;fds);
+                        FD_SET(fd, &amp;fds);
+
+                        /* Timeout. */
+                        tv.tv_sec = 2;
+                        tv.tv_usec = 0;
+
+                        r = select(fd + 1, &amp;fds, NULL, NULL, &amp;tv);
+
+                        if (-1 == r) {
+                                if (EINTR == errno)
+                                        continue;
+                                errno_exit("select");
+                        }
+
+                        if (0 == r) {
+                                fprintf(stderr, "select timeout\n");
+                                exit(EXIT_FAILURE);
+                        }
+
+                        if (read_frame())
+                                break;
+                        /* EAGAIN - continue select loop. */
+                }
+        }
+}
+
+static void stop_capturing(void)
+{
+        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type;
+
+        switch (io) {
+        case IO_METHOD_READ:
+                /* Nothing to do. */
+                break;
+
+        case IO_METHOD_MMAP:
+        case IO_METHOD_USERPTR:
+                type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                if (-1 == xioctl(fd, VIDIOC_STREAMOFF, &amp;type))
+                        errno_exit("VIDIOC_STREAMOFF");
+                break;
+        }
+}
+
+static void start_capturing(void)
+{
+        unsigned int i;
+        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type;
+
+        switch (io) {
+        case IO_METHOD_READ:
+                /* Nothing to do. */
+                break;
+
+        case IO_METHOD_MMAP:
+                for (i = 0; i &lt; n_buffers; ++i) {
+                        struct <link linkend="v4l2-buffer">v4l2_buffer</link> buf;
+
+                        CLEAR(buf);
+                        buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                        buf.memory = V4L2_MEMORY_MMAP;
+                        buf.index = i;
+
+                        if (-1 == xioctl(fd, VIDIOC_QBUF, &amp;buf))
+                                errno_exit("VIDIOC_QBUF");
+                }
+                type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                if (-1 == xioctl(fd, VIDIOC_STREAMON, &amp;type))
+                        errno_exit("VIDIOC_STREAMON");
+                break;
+
+        case IO_METHOD_USERPTR:
+                for (i = 0; i &lt; n_buffers; ++i) {
+                        struct <link linkend="v4l2-buffer">v4l2_buffer</link> buf;
+
+                        CLEAR(buf);
+                        buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                        buf.memory = V4L2_MEMORY_USERPTR;
+                        buf.index = i;
+                        buf.m.userptr = (unsigned long)buffers[i].start;
+                        buf.length = buffers[i].length;
+
+                        if (-1 == xioctl(fd, VIDIOC_QBUF, &amp;buf))
+                                errno_exit("VIDIOC_QBUF");
+                }
+                type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                if (-1 == xioctl(fd, VIDIOC_STREAMON, &amp;type))
+                        errno_exit("VIDIOC_STREAMON");
+                break;
+        }
+}
+
+static void uninit_device(void)
+{
+        unsigned int i;
+
+        switch (io) {
+        case IO_METHOD_READ:
+                free(buffers[0].start);
+                break;
+
+        case IO_METHOD_MMAP:
+                for (i = 0; i &lt; n_buffers; ++i)
+                        if (-1 == munmap(buffers[i].start, buffers[i].length))
+                                errno_exit("munmap");
+                break;
+
+        case IO_METHOD_USERPTR:
+                for (i = 0; i &lt; n_buffers; ++i)
+                        free(buffers[i].start);
+                break;
+        }
+
+        free(buffers);
+}
+
+static void init_read(unsigned int buffer_size)
+{
+        buffers = calloc(1, sizeof(*buffers));
+
+        if (!buffers) {
+                fprintf(stderr, "Out of memory\n");
+                exit(EXIT_FAILURE);
+        }
+
+        buffers[0].length = buffer_size;
+        buffers[0].start = malloc(buffer_size);
+
+        if (!buffers[0].start) {
+                fprintf(stderr, "Out of memory\n");
+                exit(EXIT_FAILURE);
+        }
+}
+
+static void init_mmap(void)
+{
+        struct <link linkend="v4l2-requestbuffers">v4l2_requestbuffers</link> req;
+
+        CLEAR(req);
+
+        req.count = 4;
+        req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+        req.memory = V4L2_MEMORY_MMAP;
+
+        if (-1 == xioctl(fd, VIDIOC_REQBUFS, &amp;req)) {
+                if (EINVAL == errno) {
+                        fprintf(stderr, "%s does not support "
+                                 "memory mapping\n", dev_name);
+                        exit(EXIT_FAILURE);
+                } else {
+                        errno_exit("VIDIOC_REQBUFS");
+                }
+        }
+
+        if (req.count &lt; 2) {
+                fprintf(stderr, "Insufficient buffer memory on %s\n",
+                         dev_name);
+                exit(EXIT_FAILURE);
+        }
+
+        buffers = calloc(req.count, sizeof(*buffers));
+
+        if (!buffers) {
+                fprintf(stderr, "Out of memory\n");
+                exit(EXIT_FAILURE);
+        }
+
+        for (n_buffers = 0; n_buffers &lt; req.count; ++n_buffers) {
+                struct <link linkend="v4l2-buffer">v4l2_buffer</link> buf;
+
+                CLEAR(buf);
+
+                buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                buf.memory      = V4L2_MEMORY_MMAP;
+                buf.index       = n_buffers;
+
+                if (-1 == xioctl(fd, VIDIOC_QUERYBUF, &amp;buf))
+                        errno_exit("VIDIOC_QUERYBUF");
+
+                buffers[n_buffers].length = buf.length;
+                buffers[n_buffers].start =
+                        mmap(NULL /* start anywhere */,
+                              buf.length,
+                              PROT_READ | PROT_WRITE /* required */,
+                              MAP_SHARED /* recommended */,
+                              fd, buf.m.offset);
+
+                if (MAP_FAILED == buffers[n_buffers].start)
+                        errno_exit("mmap");
+        }
+}
+
+static void init_userp(unsigned int buffer_size)
+{
+        struct <link linkend="v4l2-requestbuffers">v4l2_requestbuffers</link> req;
+
+        CLEAR(req);
+
+        req.count  = 4;
+        req.type   = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+        req.memory = V4L2_MEMORY_USERPTR;
+
+        if (-1 == xioctl(fd, VIDIOC_REQBUFS, &amp;req)) {
+                if (EINVAL == errno) {
+                        fprintf(stderr, "%s does not support "
+                                 "user pointer i/o\n", dev_name);
+                        exit(EXIT_FAILURE);
+                } else {
+                        errno_exit("VIDIOC_REQBUFS");
+                }
+        }
+
+        buffers = calloc(4, sizeof(*buffers));
+
+        if (!buffers) {
+                fprintf(stderr, "Out of memory\n");
+                exit(EXIT_FAILURE);
+        }
+
+        for (n_buffers = 0; n_buffers &lt; 4; ++n_buffers) {
+                buffers[n_buffers].length = buffer_size;
+                buffers[n_buffers].start = malloc(buffer_size);
+
+                if (!buffers[n_buffers].start) {
+                        fprintf(stderr, "Out of memory\n");
+                        exit(EXIT_FAILURE);
+                }
+        }
+}
+
+static void init_device(void)
+{
+        struct <link linkend="v4l2-capability">v4l2_capability</link> cap;
+        struct <link linkend="v4l2-cropcap">v4l2_cropcap</link> cropcap;
+        struct <link linkend="v4l2-crop">v4l2_crop</link> crop;
+        struct <link linkend="v4l2-format">v4l2_format</link> fmt;
+        unsigned int min;
+
+        if (-1 == xioctl(fd, VIDIOC_QUERYCAP, &amp;cap)) {
+                if (EINVAL == errno) {
+                        fprintf(stderr, "%s is no V4L2 device\n",
+                                 dev_name);
+                        exit(EXIT_FAILURE);
+                } else {
+                        errno_exit("VIDIOC_QUERYCAP");
+                }
+        }
+
+        if (!(cap.capabilities &amp; V4L2_CAP_VIDEO_CAPTURE)) {
+                fprintf(stderr, "%s is no video capture device\n",
+                         dev_name);
+                exit(EXIT_FAILURE);
+        }
+
+        switch (io) {
+        case IO_METHOD_READ:
+                if (!(cap.capabilities &amp; V4L2_CAP_READWRITE)) {
+                        fprintf(stderr, "%s does not support read i/o\n",
+                                 dev_name);
+                        exit(EXIT_FAILURE);
+                }
+                break;
+
+        case IO_METHOD_MMAP:
+        case IO_METHOD_USERPTR:
+                if (!(cap.capabilities &amp; V4L2_CAP_STREAMING)) {
+                        fprintf(stderr, "%s does not support streaming i/o\n",
+                                 dev_name);
+                        exit(EXIT_FAILURE);
+                }
+                break;
+        }
+
+
+        /* Select video input, video standard and tune here. */
+
+
+        CLEAR(cropcap);
+
+        cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+        if (0 == xioctl(fd, VIDIOC_CROPCAP, &amp;cropcap)) {
+                crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                crop.c = cropcap.defrect; /* reset to default */
+
+                if (-1 == xioctl(fd, VIDIOC_S_CROP, &amp;crop)) {
+                        switch (errno) {
+                        case EINVAL:
+                                /* Cropping not supported. */
+                                break;
+                        default:
+                                /* Errors ignored. */
+                                break;
+                        }
+                }
+        } else {
+                /* Errors ignored. */
+        }
+
+
+        CLEAR(fmt);
+
+        fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+        if (force_format) {
+                fmt.fmt.pix.width       = 640;
+                fmt.fmt.pix.height      = 480;
+                fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+                fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;
+
+                if (-1 == xioctl(fd, VIDIOC_S_FMT, &amp;fmt))
+                        errno_exit("VIDIOC_S_FMT");
+
+                /* Note VIDIOC_S_FMT may change width and height. */
+        } else {
+                /* Preserve original settings as set by v4l2-ctl for example */
+                if (-1 == xioctl(fd, VIDIOC_G_FMT, &amp;fmt))
+                        errno_exit("VIDIOC_G_FMT");
+        }
+
+        /* Buggy driver paranoia. */
+        min = fmt.fmt.pix.width * 2;
+        if (fmt.fmt.pix.bytesperline &lt; min)
+                fmt.fmt.pix.bytesperline = min;
+        min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height;
+        if (fmt.fmt.pix.sizeimage &lt; min)
+                fmt.fmt.pix.sizeimage = min;
+
+        switch (io) {
+        case IO_METHOD_READ:
+                init_read(fmt.fmt.pix.sizeimage);
+                break;
+
+        case IO_METHOD_MMAP:
+                init_mmap();
+                break;
+
+        case IO_METHOD_USERPTR:
+                init_userp(fmt.fmt.pix.sizeimage);
+                break;
+        }
+}
+
+static void close_device(void)
+{
+        if (-1 == close(fd))
+                errno_exit("close");
+
+        fd = -1;
+}
+
+static void open_device(void)
+{
+        struct stat st;
+
+        if (-1 == stat(dev_name, &amp;st)) {
+                fprintf(stderr, "Cannot identify '%s': %d, %s\n",
+                         dev_name, errno, strerror(errno));
+                exit(EXIT_FAILURE);
+        }
+
+        if (!S_ISCHR(st.st_mode)) {
+                fprintf(stderr, "%s is no device\n", dev_name);
+                exit(EXIT_FAILURE);
+        }
+
+        fd = open(dev_name, O_RDWR /* required */ | O_NONBLOCK, 0);
+
+        if (-1 == fd) {
+                fprintf(stderr, "Cannot open '%s': %d, %s\n",
+                         dev_name, errno, strerror(errno));
+                exit(EXIT_FAILURE);
+        }
+}
+
+static void usage(FILE *fp, int argc, char **argv)
+{
+        fprintf(fp,
+                 "Usage: %s [options]\n\n"
+                 "Version 1.3\n"
+                 "Options:\n"
+                 "-d | --device name   Video device name [%s]\n"
+                 "-h | --help          Print this message\n"
+                 "-m | --mmap          Use memory mapped buffers [default]\n"
+                 "-r | --read          Use read() calls\n"
+                 "-u | --userp         Use application allocated buffers\n"
+                 "-o | --output        Outputs stream to stdout\n"
+                 "-f | --format        Force format to 640x480 YUYV\n"
+                 "-c | --count         Number of frames to grab [%i]\n"
+                 "",
+                 argv[0], dev_name, frame_count);
+}
+
+static const char short_options[] = "d:hmruofc:";
+
+static const struct option
+long_options[] = {
+        { "device", required_argument, NULL, 'd' },
+        { "help",   no_argument,       NULL, 'h' },
+        { "mmap",   no_argument,       NULL, 'm' },
+        { "read",   no_argument,       NULL, 'r' },
+        { "userp",  no_argument,       NULL, 'u' },
+        { "output", no_argument,       NULL, 'o' },
+        { "format", no_argument,       NULL, 'f' },
+        { "count",  required_argument, NULL, 'c' },
+        { 0, 0, 0, 0 }
+};
+
+int main(int argc, char **argv)
+{
+        dev_name = "/dev/video0";
+
+        for (;;) {
+                int idx;
+                int c;
+
+                c = getopt_long(argc, argv,
+                                short_options, long_options, &amp;idx);
+
+                if (-1 == c)
+                        break;
+
+                switch (c) {
+                case 0: /* getopt_long() flag */
+                        break;
+
+                case 'd':
+                        dev_name = optarg;
+                        break;
+
+                case 'h':
+                        usage(stdout, argc, argv);
+                        exit(EXIT_SUCCESS);
+
+                case 'm':
+                        io = IO_METHOD_MMAP;
+                        break;
+
+                case 'r':
+                        io = IO_METHOD_READ;
+                        break;
+
+                case 'u':
+                        io = IO_METHOD_USERPTR;
+                        break;
+
+                case 'o':
+                        out_buf++;
+                        break;
+
+                case 'f':
+                        force_format++;
+                        break;
+
+                case 'c':
+                        errno = 0;
+                        frame_count = strtol(optarg, NULL, 0);
+                        if (errno)
+                                errno_exit(optarg);
+                        break;
+
+                default:
+                        usage(stderr, argc, argv);
+                        exit(EXIT_FAILURE);
+                }
+        }
+
+        open_device();
+        init_device();
+        start_capturing();
+        mainloop();
+        stop_capturing();
+        uninit_device();
+        close_device();
+        fprintf(stderr, "\n");
+        return 0;
+}
+</programlisting>

linux-imx/Documentation/DocBook/media/v4l/common.xml

diff --git a/linux-imx/Documentation/DocBook/media/v4l/common.xml b/linux-imx/Documentation/DocBook/media/v4l/common.xml
new file mode 100644
index 0000000..1ddf354
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/v4l/common.xml
@@ -0,0 +1,1200 @@
+  <title>Common API Elements</title>
+
+  <para>Programming a V4L2 device consists of these
+steps:</para>
+
+  <itemizedlist>
+    <listitem>
+      <para>Opening the device</para>
+    </listitem>
+    <listitem>
+      <para>Changing device properties, selecting a video and audio
+input, video standard, picture brightness a.&nbsp;o.</para>
+    </listitem>
+    <listitem>
+      <para>Negotiating a data format</para>
+    </listitem>
+    <listitem>
+      <para>Negotiating an input/output method</para>
+    </listitem>
+    <listitem>
+      <para>The actual input/output loop</para>
+    </listitem>
+    <listitem>
+      <para>Closing the device</para>
+    </listitem>
+  </itemizedlist>
+
+  <para>In practice most steps are optional and can be executed out of
+order. It depends on the V4L2 device type, you can read about the
+details in <xref linkend="devices" />. In this chapter we will discuss
+the basic concepts applicable to all devices.</para>
+
+  <section id="open">
+    <title>Opening and Closing Devices</title>
+
+    <section>
+      <title>Device Naming</title>
+
+      <para>V4L2 drivers are implemented as kernel modules, loaded
+manually by the system administrator or automatically when a device is
+first opened. The driver modules plug into the "videodev" kernel
+module. It provides helper functions and a common application
+interface specified in this document.</para>
+
+      <para>Each driver thus loaded registers one or more device nodes
+with major number 81 and a minor number between 0 and 255. Assigning
+minor numbers to V4L2 devices is entirely up to the system administrator,
+this is primarily intended to solve conflicts between devices.<footnote>
+	  <para>Access permissions are associated with character
+device special files, hence we must ensure device numbers cannot
+change with the module load order. To this end minor numbers are no
+longer automatically assigned by the "videodev" module as in V4L but
+requested by the driver. The defaults will suffice for most people
+unless two drivers compete for the same minor numbers.</para>
+	</footnote> The module options to select minor numbers are named
+after the device special file with a "_nr" suffix. For example "video_nr"
+for <filename>/dev/video</filename> video capture devices. The number is
+an offset to the base minor number associated with the device type.
+<footnote>
+	  <para>In earlier versions of the V4L2 API the module options
+where named after the device special file with a "unit_" prefix, expressing
+the minor number itself, not an offset. Rationale for this change is unknown.
+Lastly the naming and semantics are just a convention among driver writers,
+the point to note is that minor numbers are not supposed to be hardcoded
+into drivers.</para>
+	</footnote> When the driver supports multiple devices of the same
+type more than one minor number can be assigned, separated by commas:
+<informalexample>
+	  <screen>
+&gt; insmod mydriver.o video_nr=0,1 radio_nr=0,1</screen>
+	</informalexample></para>
+
+      <para>In <filename>/etc/modules.conf</filename> this may be
+written as: <informalexample>
+	  <screen>
+alias char-major-81-0 mydriver
+alias char-major-81-1 mydriver
+alias char-major-81-64 mydriver              <co id="alias" />
+options mydriver video_nr=0,1 radio_nr=0,1   <co id="options" />
+	  </screen>
+	  <calloutlist>
+	    <callout arearefs="alias">
+	      <para>When an application attempts to open a device
+special file with major number 81 and minor number 0, 1, or 64, load
+"mydriver" (and the "videodev" module it depends upon).</para>
+	    </callout>
+	    <callout arearefs="options">
+	      <para>Register the first two video capture devices with
+minor number 0 and 1 (base number is 0), the first two radio device
+with minor number 64 and 65 (base 64).</para>
+	    </callout>
+	  </calloutlist>
+	</informalexample> When no minor number is given as module
+option the driver supplies a default. <xref linkend="devices" />
+recommends the base minor numbers to be used for the various device
+types. Obviously minor numbers must be unique. When the number is
+already in use the <emphasis>offending device</emphasis> will not be
+registered. <!-- Blessed by Linus Torvalds on
+linux-kernel@vger.kernel.org, 2002-11-20. --></para>
+
+      <para>By convention system administrators create various
+character device special files with these major and minor numbers in
+the <filename>/dev</filename> directory. The names recommended for the
+different V4L2 device types are listed in <xref linkend="devices" />.
+</para>
+
+      <para>The creation of character special files (with
+<application>mknod</application>) is a privileged operation and
+devices cannot be opened by major and minor number. That means
+applications cannot <emphasis>reliable</emphasis> scan for loaded or
+installed drivers. The user must enter a device name, or the
+application can try the conventional device names.</para>
+
+      <para>Under the device filesystem (devfs) the minor number
+options are ignored. V4L2 drivers (or by proxy the "videodev" module)
+automatically create the required device files in the
+<filename>/dev/v4l</filename> directory using the conventional device
+names above.</para>
+    </section>
+
+    <section id="related">
+      <title>Related Devices</title>
+
+      <para>Devices can support several related functions. For example
+video capturing, video overlay and VBI capturing are related because
+these functions share, amongst other, the same video input and tuner
+frequency. V4L and earlier versions of V4L2 used the same device name
+and minor number for video capturing and overlay, but different ones
+for VBI. Experience showed this approach has several problems<footnote>
+	  <para>Given a device file name one cannot reliable find
+related devices. For once names are arbitrary and in a system with
+multiple devices, where only some support VBI capturing, a
+<filename>/dev/video2</filename> is not necessarily related to
+<filename>/dev/vbi2</filename>. The V4L
+<constant>VIDIOCGUNIT</constant> ioctl would require a search for a
+device file with a particular major and minor number.</para>
+	</footnote>, and to make things worse the V4L videodev module
+used to prohibit multiple opens of a device.</para>
+
+      <para>As a remedy the present version of the V4L2 API relaxed the
+concept of device types with specific names and minor numbers. For
+compatibility with old applications drivers must still register different
+minor numbers to assign a default function to the device. But if related
+functions are supported by the driver they must be available under all
+registered minor numbers. The desired function can be selected after
+opening the device as described in <xref linkend="devices" />.</para>
+
+      <para>Imagine a driver supporting video capturing, video
+overlay, raw VBI capturing, and FM radio reception. It registers three
+devices with minor number 0, 64 and 224 (this numbering scheme is
+inherited from the V4L API). Regardless if
+<filename>/dev/video</filename> (81, 0) or
+<filename>/dev/vbi</filename> (81, 224) is opened the application can
+select any one of the video capturing, overlay or VBI capturing
+functions. Without programming (e.&nbsp;g. reading from the device
+with <application>dd</application> or <application>cat</application>)
+<filename>/dev/video</filename> captures video images, while
+<filename>/dev/vbi</filename> captures raw VBI data.
+<filename>/dev/radio</filename> (81, 64) is invariable a radio device,
+unrelated to the video functions. Being unrelated does not imply the
+devices can be used at the same time, however. The &func-open;
+function may very well return an &EBUSY;.</para>
+
+      <para>Besides video input or output the hardware may also
+support audio sampling or playback. If so, these functions are
+implemented as OSS or ALSA PCM devices and eventually OSS or ALSA
+audio mixer. The V4L2 API makes no provisions yet to find these
+related devices. If you have an idea please write to the linux-media
+mailing list: &v4l-ml;.</para>
+    </section>
+
+    <section>
+      <title>Multiple Opens</title>
+
+      <para>In general, V4L2 devices can be opened more than once.
+When this is supported by the driver, users can for example start a
+"panel" application to change controls like brightness or audio
+volume, while another application captures video and audio. In other words, panel
+applications are comparable to an OSS or ALSA audio mixer application.
+When a device supports multiple functions like capturing and overlay
+<emphasis>simultaneously</emphasis>, multiple opens allow concurrent
+use of the device by forked processes or specialized applications.</para>
+
+      <para>Multiple opens are optional, although drivers should
+permit at least concurrent accesses without data exchange, &ie; panel
+applications. This implies &func-open; can return an &EBUSY; when the
+device is already in use, as well as &func-ioctl; functions initiating
+data exchange (namely the &VIDIOC-S-FMT; ioctl), and the &func-read;
+and &func-write; functions.</para>
+
+      <para>Mere opening a V4L2 device does not grant exclusive
+access.<footnote>
+	  <para>Drivers could recognize the
+<constant>O_EXCL</constant> open flag. Presently this is not required,
+so applications cannot know if it really works.</para>
+	</footnote> Initiating data exchange however assigns the right
+to read or write the requested type of data, and to change related
+properties, to this file descriptor. Applications can request
+additional access privileges using the priority mechanism described in
+<xref linkend="app-pri" />.</para>
+    </section>
+
+    <section>
+      <title>Shared Data Streams</title>
+
+      <para>V4L2 drivers should not support multiple applications
+reading or writing the same data stream on a device by copying
+buffers, time multiplexing or similar means. This is better handled by
+a proxy application in user space. When the driver supports stream
+sharing anyway it must be implemented transparently. The V4L2 API does
+not specify how conflicts are solved. <!-- For example O_EXCL when the
+application does not want to be preempted, PROT_READ mmapped buffers
+which can be mapped twice, what happens when image formats do not
+match etc.--></para>
+    </section>
+
+    <section>
+      <title>Functions</title>
+
+    <para>To open and close V4L2 devices applications use the
+&func-open; and &func-close; function, respectively. Devices are
+programmed using the &func-ioctl; function as explained in the
+following sections.</para>
+    </section>
+  </section>
+
+  <section id="querycap">
+    <title>Querying Capabilities</title>
+
+    <para>Because V4L2 covers a wide variety of devices not all
+aspects of the API are equally applicable to all types of devices.
+Furthermore devices of the same type have different capabilities and
+this specification permits the omission of a few complicated and less
+important parts of the API.</para>
+
+    <para>The &VIDIOC-QUERYCAP; ioctl is available to check if the kernel
+device is compatible with this specification, and to query the <link
+linkend="devices">functions</link> and <link linkend="io">I/O
+methods</link> supported by the device.</para>
+
+    <para>Starting with kernel version 3.1, VIDIOC-QUERYCAP will return the
+V4L2 API version used by the driver, with generally matches the Kernel version.
+There's no need of using &VIDIOC-QUERYCAP; to check if an specific ioctl is
+supported, the V4L2 core now returns ENOIOCTLCMD if a driver doesn't provide
+support for an ioctl.</para>
+
+    <para>Other features can be queried
+by calling the respective ioctl, for example &VIDIOC-ENUMINPUT;
+to learn about the number, types and names of video connectors on the
+device. Although abstraction is a major objective of this API, the
+ioctl also allows driver specific applications to reliable identify
+the driver.</para>
+
+    <para>All V4L2 drivers must support
+<constant>VIDIOC_QUERYCAP</constant>. Applications should always call
+this ioctl after opening the device.</para>
+  </section>
+
+  <section id="app-pri">
+    <title>Application Priority</title>
+
+    <para>When multiple applications share a device it may be
+desirable to assign them different priorities. Contrary to the
+traditional "rm -rf /" school of thought a video recording application
+could for example block other applications from changing video
+controls or switching the current TV channel. Another objective is to
+permit low priority applications working in background, which can be
+preempted by user controlled applications and automatically regain
+control of the device at a later time.</para>
+
+    <para>Since these features cannot be implemented entirely in user
+space V4L2 defines the &VIDIOC-G-PRIORITY; and &VIDIOC-S-PRIORITY;
+ioctls to request and query the access priority associate with a file
+descriptor. Opening a device assigns a medium priority, compatible
+with earlier versions of V4L2 and drivers not supporting these ioctls.
+Applications requiring a different priority will usually call
+<constant>VIDIOC_S_PRIORITY</constant> after verifying the device with
+the &VIDIOC-QUERYCAP; ioctl.</para>
+
+    <para>Ioctls changing driver properties, such as &VIDIOC-S-INPUT;,
+return an &EBUSY; after another application obtained higher priority.
+An event mechanism to notify applications about asynchronous property
+changes has been proposed but not added yet.</para>
+  </section>
+
+  <section id="video">
+    <title>Video Inputs and Outputs</title>
+
+    <para>Video inputs and outputs are physical connectors of a
+device. These can be for example RF connectors (antenna/cable), CVBS
+a.k.a. Composite Video, S-Video or RGB connectors. Only video and VBI
+capture devices have inputs, output devices have outputs, at least one
+each. Radio devices have no video inputs or outputs.</para>
+
+    <para>To learn about the number and attributes of the
+available inputs and outputs applications can enumerate them with the
+&VIDIOC-ENUMINPUT; and &VIDIOC-ENUMOUTPUT; ioctl, respectively. The
+&v4l2-input; returned by the <constant>VIDIOC_ENUMINPUT</constant>
+ioctl also contains signal status information applicable when the
+current video input is queried.</para>
+
+    <para>The &VIDIOC-G-INPUT; and &VIDIOC-G-OUTPUT; ioctl return the
+index of the current video input or output. To select a different
+input or output applications call the &VIDIOC-S-INPUT; and
+&VIDIOC-S-OUTPUT; ioctl. Drivers must implement all the input ioctls
+when the device has one or more inputs, all the output ioctls when the
+device has one or more outputs.</para>
+
+    <!--
+    <figure id=io-tree>
+      <title>Input and output enumeration is the root of most device properties.</title>
+      <mediaobject>
+	<imageobject>
+	  <imagedata fileref="links.pdf" format="ps" />
+	</imageobject>
+	<imageobject>
+	  <imagedata fileref="links.gif" format="gif" />
+	</imageobject>
+	<textobject>
+	  <phrase>Links between various device property structures.</phrase>
+	</textobject>
+      </mediaobject>
+    </figure>
+    -->
+
+    <example>
+      <title>Information about the current video input</title>
+
+      <programlisting>
+&v4l2-input; input;
+int index;
+
+if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &amp;index)) {
+	perror ("VIDIOC_G_INPUT");
+	exit (EXIT_FAILURE);
+}
+
+memset (&amp;input, 0, sizeof (input));
+input.index = index;
+
+if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &amp;input)) {
+	perror ("VIDIOC_ENUMINPUT");
+	exit (EXIT_FAILURE);
+}
+
+printf ("Current input: %s\n", input.name);
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Switching to the first video input</title>
+
+      <programlisting>
+int index;
+
+index = 0;
+
+if (-1 == ioctl (fd, &VIDIOC-S-INPUT;, &amp;index)) {
+	perror ("VIDIOC_S_INPUT");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+  </section>
+
+  <section id="audio">
+    <title>Audio Inputs and Outputs</title>
+
+    <para>Audio inputs and outputs are physical connectors of a
+device. Video capture devices have inputs, output devices have
+outputs, zero or more each. Radio devices have no audio inputs or
+outputs. They have exactly one tuner which in fact
+<emphasis>is</emphasis> an audio source, but this API associates
+tuners with video inputs or outputs only, and radio devices have
+none of these.<footnote>
+	<para>Actually &v4l2-audio; ought to have a
+<structfield>tuner</structfield> field like &v4l2-input;, not only
+making the API more consistent but also permitting radio devices with
+multiple tuners.</para>
+      </footnote> A connector on a TV card to loop back the received
+audio signal to a sound card is not considered an audio output.</para>
+
+    <para>Audio and video inputs and outputs are associated. Selecting
+a video source also selects an audio source. This is most evident when
+the video and audio source is a tuner. Further audio connectors can
+combine with more than one video input or output. Assumed two
+composite video inputs and two audio inputs exist, there may be up to
+four valid combinations. The relation of video and audio connectors
+is defined in the <structfield>audioset</structfield> field of the
+respective &v4l2-input; or &v4l2-output;, where each bit represents
+the index number, starting at zero, of one audio input or output.</para>
+
+    <para>To learn about the number and attributes of the
+available inputs and outputs applications can enumerate them with the
+&VIDIOC-ENUMAUDIO; and &VIDIOC-ENUMAUDOUT; ioctl, respectively. The
+&v4l2-audio; returned by the <constant>VIDIOC_ENUMAUDIO</constant> ioctl
+also contains signal status information applicable when the current
+audio input is queried.</para>
+
+    <para>The &VIDIOC-G-AUDIO; and &VIDIOC-G-AUDOUT; ioctl report
+the current audio input and output, respectively. Note that, unlike
+&VIDIOC-G-INPUT; and &VIDIOC-G-OUTPUT; these ioctls return a structure
+as <constant>VIDIOC_ENUMAUDIO</constant> and
+<constant>VIDIOC_ENUMAUDOUT</constant> do, not just an index.</para>
+
+    <para>To select an audio input and change its properties
+applications call the &VIDIOC-S-AUDIO; ioctl. To select an audio
+output (which presently has no changeable properties) applications
+call the &VIDIOC-S-AUDOUT; ioctl.</para>
+
+    <para>Drivers must implement all input ioctls when the device
+has one or more inputs, all output ioctls when the device has one
+or more outputs. When the device has any audio inputs or outputs the
+driver must set the <constant>V4L2_CAP_AUDIO</constant> flag in the
+&v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl.</para>
+
+    <example>
+      <title>Information about the current audio input</title>
+
+      <programlisting>
+&v4l2-audio; audio;
+
+memset (&amp;audio, 0, sizeof (audio));
+
+if (-1 == ioctl (fd, &VIDIOC-G-AUDIO;, &amp;audio)) {
+	perror ("VIDIOC_G_AUDIO");
+	exit (EXIT_FAILURE);
+}
+
+printf ("Current input: %s\n", audio.name);
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Switching to the first audio input</title>
+
+      <programlisting>
+&v4l2-audio; audio;
+
+memset (&amp;audio, 0, sizeof (audio)); /* clear audio.mode, audio.reserved */
+
+audio.index = 0;
+
+if (-1 == ioctl (fd, &VIDIOC-S-AUDIO;, &amp;audio)) {
+	perror ("VIDIOC_S_AUDIO");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+  </section>
+
+  <section id="tuner">
+    <title>Tuners and Modulators</title>
+
+    <section>
+      <title>Tuners</title>
+
+      <para>Video input devices can have one or more tuners
+demodulating a RF signal. Each tuner is associated with one or more
+video inputs, depending on the number of RF connectors on the tuner.
+The <structfield>type</structfield> field of the respective
+&v4l2-input; returned by the &VIDIOC-ENUMINPUT; ioctl is set to
+<constant>V4L2_INPUT_TYPE_TUNER</constant> and its
+<structfield>tuner</structfield> field contains the index number of
+the tuner.</para>
+
+      <para>Radio input devices have exactly one tuner with index zero, no
+video inputs.</para>
+
+      <para>To query and change tuner properties applications use the
+&VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; ioctl, respectively. The
+&v4l2-tuner; returned by <constant>VIDIOC_G_TUNER</constant> also
+contains signal status information applicable when the tuner of the
+current video or radio input is queried. Note that
+<constant>VIDIOC_S_TUNER</constant> does not switch the current tuner,
+when there is more than one at all. The tuner is solely determined by
+the current video input. Drivers must support both ioctls and set the
+<constant>V4L2_CAP_TUNER</constant> flag in the &v4l2-capability;
+returned by the &VIDIOC-QUERYCAP; ioctl when the device has one or
+more tuners.</para>
+    </section>
+
+    <section>
+      <title>Modulators</title>
+
+      <para>Video output devices can have one or more modulators, uh,
+modulating a video signal for radiation or connection to the antenna
+input of a TV set or video recorder. Each modulator is associated with
+one or more video outputs, depending on the number of RF connectors on
+the modulator. The <structfield>type</structfield> field of the
+respective &v4l2-output; returned by the &VIDIOC-ENUMOUTPUT; ioctl is
+set to <constant>V4L2_OUTPUT_TYPE_MODULATOR</constant> and its
+<structfield>modulator</structfield> field contains the index number
+of the modulator.</para>
+
+      <para>Radio output devices have exactly one modulator with index
+zero, no video outputs.</para>
+
+      <para>A video or radio device cannot support both a tuner and a
+modulator. Two separate device nodes will have to be used for such
+hardware, one that supports the tuner functionality and one that supports
+the modulator functionality. The reason is a limitation with the
+&VIDIOC-S-FREQUENCY; ioctl where you cannot specify whether the frequency
+is for a tuner or a modulator.</para>
+
+      <para>To query and change modulator properties applications use
+the &VIDIOC-G-MODULATOR; and &VIDIOC-S-MODULATOR; ioctl. Note that
+<constant>VIDIOC_S_MODULATOR</constant> does not switch the current
+modulator, when there is more than one at all. The modulator is solely
+determined by the current video output. Drivers must support both
+ioctls and set the <constant>V4L2_CAP_MODULATOR</constant> flag in
+the &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl when the
+device has one or more modulators.</para>
+    </section>
+
+    <section>
+      <title>Radio Frequency</title>
+
+      <para>To get and set the tuner or modulator radio frequency
+applications use the &VIDIOC-G-FREQUENCY; and &VIDIOC-S-FREQUENCY;
+ioctl which both take a pointer to a &v4l2-frequency;. These ioctls
+are used for TV and radio devices alike. Drivers must support both
+ioctls when the tuner or modulator ioctls are supported, or
+when the device is a radio device.</para>
+    </section>
+  </section>
+
+  <section id="standard">
+    <title>Video Standards</title>
+
+    <para>Video devices typically support one or more different video
+standards or variations of standards. Each video input and output may
+support another set of standards. This set is reported by the
+<structfield>std</structfield> field of &v4l2-input; and
+&v4l2-output; returned by the &VIDIOC-ENUMINPUT; and
+&VIDIOC-ENUMOUTPUT; ioctl, respectively.</para>
+
+    <para>V4L2 defines one bit for each analog video standard
+currently in use worldwide, and sets aside bits for driver defined
+standards, &eg; hybrid standards to watch NTSC video tapes on PAL TVs
+and vice versa. Applications can use the predefined bits to select a
+particular standard, although presenting the user a menu of supported
+standards is preferred. To enumerate and query the attributes of the
+supported standards applications use the &VIDIOC-ENUMSTD; ioctl.</para>
+
+    <para>Many of the defined standards are actually just variations
+of a few major standards. The hardware may in fact not distinguish
+between them, or do so internal and switch automatically. Therefore
+enumerated standards also contain sets of one or more standard
+bits.</para>
+
+    <para>Assume a hypothetic tuner capable of demodulating B/PAL,
+G/PAL and I/PAL signals. The first enumerated standard is a set of B
+and G/PAL, switched automatically depending on the selected radio
+frequency in UHF or VHF band. Enumeration gives a "PAL-B/G" or "PAL-I"
+choice. Similar a Composite input may collapse standards, enumerating
+"PAL-B/G/H/I", "NTSC-M" and "SECAM-D/K".<footnote>
+	<para>Some users are already confused by technical terms PAL,
+NTSC and SECAM. There is no point asking them to distinguish between
+B, G, D, or K when the software or hardware can do that
+automatically.</para>
+    </footnote></para>
+
+    <para>To query and select the standard used by the current video
+input or output applications call the &VIDIOC-G-STD; and
+&VIDIOC-S-STD; ioctl, respectively. The <emphasis>received</emphasis>
+standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note that the parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), <emphasis>not</emphasis> an index into the standard enumeration.<footnote>
+	<para>An alternative to the current scheme is to use pointers
+to indices as arguments of <constant>VIDIOC_G_STD</constant> and
+<constant>VIDIOC_S_STD</constant>, the &v4l2-input; and
+&v4l2-output; <structfield>std</structfield> field would be a set of
+indices like <structfield>audioset</structfield>.</para>
+	<para>Indices are consistent with the rest of the API
+and identify the standard unambiguously. In the present scheme of
+things an enumerated standard is looked up by &v4l2-std-id;. Now the
+standards supported by the inputs of a device can overlap. Just
+assume the tuner and composite input in the example above both
+exist on a device. An enumeration of "PAL-B/G", "PAL-H/I" suggests
+a choice which does not exist. We cannot merge or omit sets, because
+applications would be unable to find the standards reported by
+<constant>VIDIOC_G_STD</constant>. That leaves separate enumerations
+for each input. Also selecting a standard by &v4l2-std-id; can be
+ambiguous. Advantage of this method is that applications need not
+identify the standard indirectly, after enumerating.</para><para>So in
+summary, the lookup itself is unavoidable. The difference is only
+whether the lookup is necessary to find an enumerated standard or to
+switch to a standard by &v4l2-std-id;.</para>
+      </footnote> Drivers must implement all video standard ioctls
+when the device has one or more video inputs or outputs.</para>
+
+    <para>Special rules apply to devices such as USB cameras where the notion of video
+standards makes little sense. More generally for any capture or output device
+which is: <itemizedlist>
+	<listitem>
+	  <para>incapable of capturing fields or frames at the nominal
+rate of the video standard, or</para>
+	</listitem>
+	<listitem>
+	  <para>that does not support the video standard formats at all.</para>
+	</listitem>
+      </itemizedlist> Here the driver shall set the
+<structfield>std</structfield> field of &v4l2-input; and &v4l2-output;
+to zero and the <constant>VIDIOC_G_STD</constant>,
+<constant>VIDIOC_S_STD</constant>,
+<constant>VIDIOC_QUERYSTD</constant> and
+<constant>VIDIOC_ENUMSTD</constant> ioctls shall return the
+&ENOTTY;.<footnote>
+	<para>See <xref linkend="buffer" /> for a rationale.</para>
+	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
+<xref linkend="output-capabilities"/> flags to determine whether the video standard ioctls
+are available for the device.</para>
+
+	<para>See <xref linkend="buffer" /> for a rationale. Probably
+even USB cameras follow some well known video standard. It might have
+been better to explicitly indicate elsewhere if a device cannot live
+up to normal expectations, instead of this exception.</para>
+	    </footnote></para>
+
+    <example>
+      <title>Information about the current video standard</title>
+
+      <programlisting>
+&v4l2-std-id; std_id;
+&v4l2-standard; standard;
+
+if (-1 == ioctl (fd, &VIDIOC-G-STD;, &amp;std_id)) {
+	/* Note when VIDIOC_ENUMSTD always returns ENOTTY this
+	   is no video device or it falls under the USB exception,
+	   and VIDIOC_G_STD returning ENOTTY is no error. */
+
+	perror ("VIDIOC_G_STD");
+	exit (EXIT_FAILURE);
+}
+
+memset (&amp;standard, 0, sizeof (standard));
+standard.index = 0;
+
+while (0 == ioctl (fd, &VIDIOC-ENUMSTD;, &amp;standard)) {
+	if (standard.id &amp; std_id) {
+	       printf ("Current video standard: %s\n", standard.name);
+	       exit (EXIT_SUCCESS);
+	}
+
+	standard.index++;
+}
+
+/* EINVAL indicates the end of the enumeration, which cannot be
+   empty unless this device falls under the USB exception. */
+
+if (errno == EINVAL || standard.index == 0) {
+	perror ("VIDIOC_ENUMSTD");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Listing the video standards supported by the current
+input</title>
+
+      <programlisting>
+&v4l2-input; input;
+&v4l2-standard; standard;
+
+memset (&amp;input, 0, sizeof (input));
+
+if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &amp;input.index)) {
+	perror ("VIDIOC_G_INPUT");
+	exit (EXIT_FAILURE);
+}
+
+if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &amp;input)) {
+	perror ("VIDIOC_ENUM_INPUT");
+	exit (EXIT_FAILURE);
+}
+
+printf ("Current input %s supports:\n", input.name);
+
+memset (&amp;standard, 0, sizeof (standard));
+standard.index = 0;
+
+while (0 == ioctl (fd, &VIDIOC-ENUMSTD;, &amp;standard)) {
+	if (standard.id &amp; input.std)
+		printf ("%s\n", standard.name);
+
+	standard.index++;
+}
+
+/* EINVAL indicates the end of the enumeration, which cannot be
+   empty unless this device falls under the USB exception. */
+
+if (errno != EINVAL || standard.index == 0) {
+	perror ("VIDIOC_ENUMSTD");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+
+    <example>
+      <title>Selecting a new video standard</title>
+
+      <programlisting>
+&v4l2-input; input;
+&v4l2-std-id; std_id;
+
+memset (&amp;input, 0, sizeof (input));
+
+if (-1 == ioctl (fd, &VIDIOC-G-INPUT;, &amp;input.index)) {
+	perror ("VIDIOC_G_INPUT");
+	exit (EXIT_FAILURE);
+}
+
+if (-1 == ioctl (fd, &VIDIOC-ENUMINPUT;, &amp;input)) {
+	perror ("VIDIOC_ENUM_INPUT");
+	exit (EXIT_FAILURE);
+}
+
+if (0 == (input.std &amp; V4L2_STD_PAL_BG)) {
+	fprintf (stderr, "Oops. B/G PAL is not supported.\n");
+	exit (EXIT_FAILURE);
+}
+
+/* Note this is also supposed to work when only B
+   <emphasis>or</emphasis> G/PAL is supported. */
+
+std_id = V4L2_STD_PAL_BG;
+
+if (-1 == ioctl (fd, &VIDIOC-S-STD;, &amp;std_id)) {
+	perror ("VIDIOC_S_STD");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+    </example>
+  </section>
+  <section id="dv-timings">
+	<title>Digital Video (DV) Timings</title>
+	<para>
+	The video standards discussed so far have been dealing with Analog TV and the
+corresponding video timings. Today there are many more different hardware interfaces
+such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry
+video signals and there is a need to extend the API to select the video timings
+for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to
+the limited bits available, a new set of IOCTLs was added to set/get video timings at
+the input and output: </para><itemizedlist>
+	<listitem>
+	<para>DV Timings: This will allow applications to define detailed
+video timings for the interface. This includes parameters such as width, height,
+polarities, frontporch, backporch etc. The <filename>linux/v4l2-dv-timings.h</filename>
+header can be used to get the timings of the formats in the <xref linkend="cea861" /> and
+<xref linkend="vesadmt" /> standards.
+	</para>
+	</listitem>
+	</itemizedlist>
+	<para>To enumerate and query the attributes of the DV timings supported by a device,
+	applications use the &VIDIOC-ENUM-DV-TIMINGS; and &VIDIOC-DV-TIMINGS-CAP; ioctls.
+	To set DV timings for the device, applications use the
+&VIDIOC-S-DV-TIMINGS; ioctl and to get current DV timings they use the
+&VIDIOC-G-DV-TIMINGS; ioctl. To detect the DV timings as seen by the video receiver applications
+use the &VIDIOC-QUERY-DV-TIMINGS; ioctl.</para>
+	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
+<xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
+video timings for the device.</para>
+  </section>
+
+  &sub-controls;
+
+  <section id="format">
+    <title>Data Formats</title>
+
+    <section>
+      <title>Data Format Negotiation</title>
+
+      <para>Different devices exchange different kinds of data with
+applications, for example video images, raw or sliced VBI data, RDS
+datagrams. Even within one kind many different formats are possible,
+in particular an abundance of image formats. Although drivers must
+provide a default and the selection persists across closing and
+reopening a device, applications should always negotiate a data format
+before engaging in data exchange. Negotiation means the application
+asks for a particular format and the driver selects and reports the
+best the hardware can do to satisfy the request. Of course
+applications can also just query the current selection.</para>
+
+      <para>A single mechanism exists to negotiate all data formats
+using the aggregate &v4l2-format; and the &VIDIOC-G-FMT; and
+&VIDIOC-S-FMT; ioctls. Additionally the &VIDIOC-TRY-FMT; ioctl can be
+used to examine what the hardware <emphasis>could</emphasis> do,
+without actually selecting a new data format. The data formats
+supported by the V4L2 API are covered in the respective device section
+in <xref linkend="devices" />. For a closer look at image formats see
+<xref linkend="pixfmt" />.</para>
+
+      <para>The <constant>VIDIOC_S_FMT</constant> ioctl is a major
+turning-point in the initialization sequence. Prior to this point
+multiple panel applications can access the same device concurrently to
+select the current input, change controls or modify other properties.
+The first <constant>VIDIOC_S_FMT</constant> assigns a logical stream
+(video data, VBI data etc.) exclusively to one file descriptor.</para>
+
+      <para>Exclusive means no other application, more precisely no
+other file descriptor, can grab this stream or change device
+properties inconsistent with the negotiated parameters. A video
+standard change for example, when the new standard uses a different
+number of scan lines, can invalidate the selected image format.
+Therefore only the file descriptor owning the stream can make
+invalidating changes. Accordingly multiple file descriptors which
+grabbed different logical streams prevent each other from interfering
+with their settings. When for example video overlay is about to start
+or already in progress, simultaneous video capturing may be restricted
+to the same cropping and image size.</para>
+
+      <para>When applications omit the
+<constant>VIDIOC_S_FMT</constant> ioctl its locking side effects are
+implied by the next step, the selection of an I/O method with the
+&VIDIOC-REQBUFS; ioctl or implicit with the first &func-read; or
+&func-write; call.</para>
+
+      <para>Generally only one logical stream can be assigned to a
+file descriptor, the exception being drivers permitting simultaneous
+video capturing and overlay using the same file descriptor for
+compatibility with V4L and earlier versions of V4L2. Switching the
+logical stream or returning into "panel mode" is possible by closing
+and reopening the device. Drivers <emphasis>may</emphasis> support a
+switch using <constant>VIDIOC_S_FMT</constant>.</para>
+
+      <para>All drivers exchanging data with
+applications must support the <constant>VIDIOC_G_FMT</constant> and
+<constant>VIDIOC_S_FMT</constant> ioctl. Implementation of the
+<constant>VIDIOC_TRY_FMT</constant> is highly recommended but
+optional.</para>
+    </section>
+
+    <section>
+      <title>Image Format Enumeration</title>
+
+      <para>Apart of the generic format negotiation functions
+a special ioctl to enumerate all image formats supported by video
+capture, overlay or output devices is available.<footnote>
+	  <para>Enumerating formats an application has no a-priori
+knowledge of (otherwise it could explicitly ask for them and need not
+enumerate) seems useless, but there are applications serving as proxy
+between drivers and the actual video applications for which this is
+useful.</para>
+	</footnote></para>
+
+      <para>The &VIDIOC-ENUM-FMT; ioctl must be supported
+by all drivers exchanging image data with applications.</para>
+
+      <important>
+	<para>Drivers are not supposed to convert image formats in
+kernel space. They must enumerate only formats directly supported by
+the hardware. If necessary driver writers should publish an example
+conversion routine or library for integration into applications.</para>
+      </important>
+    </section>
+  </section>
+
+  &sub-planar-apis;
+
+  <section id="crop">
+    <title>Image Cropping, Insertion and Scaling</title>
+
+    <para>Some video capture devices can sample a subsection of the
+picture and shrink or enlarge it to an image of arbitrary size. We
+call these abilities cropping and scaling. Some video output devices
+can scale an image up or down and insert it at an arbitrary scan line
+and horizontal offset into a video signal.</para>
+
+    <para>Applications can use the following API to select an area in
+the video signal, query the default area and the hardware limits.
+<emphasis>Despite their name, the &VIDIOC-CROPCAP;, &VIDIOC-G-CROP;
+and &VIDIOC-S-CROP; ioctls apply to input as well as output
+devices.</emphasis></para>
+
+    <para>Scaling requires a source and a target. On a video capture
+or overlay device the source is the video signal, and the cropping
+ioctls determine the area actually sampled. The target are images
+read by the application or overlaid onto the graphics screen. Their
+size (and position for an overlay) is negotiated with the
+&VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctls.</para>
+
+    <para>On a video output device the source are the images passed in
+by the application, and their size is again negotiated with the
+<constant>VIDIOC_G/S_FMT</constant> ioctls, or may be encoded in a
+compressed video stream. The target is the video signal, and the
+cropping ioctls determine the area where the images are
+inserted.</para>
+
+    <para>Source and target rectangles are defined even if the device
+does not support scaling or the <constant>VIDIOC_G/S_CROP</constant>
+ioctls. Their size (and position where applicable) will be fixed in
+this case. <emphasis>All capture and output device must support the
+<constant>VIDIOC_CROPCAP</constant> ioctl such that applications can
+determine if scaling takes place.</emphasis></para>
+
+    <section>
+      <title>Cropping Structures</title>
+
+      <figure id="crop-scale">
+	<title>Image Cropping, Insertion and Scaling</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="crop.pdf" format="PS" />
+	  </imageobject>
+	  <imageobject>
+	    <imagedata fileref="crop.gif" format="GIF" />
+	  </imageobject>
+	  <textobject>
+	    <phrase>The cropping, insertion and scaling process</phrase>
+	  </textobject>
+	</mediaobject>
+      </figure>
+
+      <para>For capture devices the coordinates of the top left
+corner, width and height of the area which can be sampled is given by
+the <structfield>bounds</structfield> substructure of the
+&v4l2-cropcap; returned by the <constant>VIDIOC_CROPCAP</constant>
+ioctl. To support a wide range of hardware this specification does not
+define an origin or units. However by convention drivers should
+horizontally count unscaled samples relative to 0H (the leading edge
+of the horizontal sync pulse, see <xref linkend="vbi-hsync" />).
+Vertically ITU-R line
+numbers of the first field (<xref linkend="vbi-525" />, <xref
+linkend="vbi-625" />), multiplied by two if the driver can capture both
+fields.</para>
+
+      <para>The top left corner, width and height of the source
+rectangle, that is the area actually sampled, is given by &v4l2-crop;
+using the same coordinate system as &v4l2-cropcap;. Applications can
+use the <constant>VIDIOC_G_CROP</constant> and
+<constant>VIDIOC_S_CROP</constant> ioctls to get and set this
+rectangle. It must lie completely within the capture boundaries and
+the driver may further adjust the requested size and/or position
+according to hardware limitations.</para>
+
+      <para>Each capture device has a default source rectangle, given
+by the <structfield>defrect</structfield> substructure of
+&v4l2-cropcap;. The center of this rectangle shall align with the
+center of the active picture area of the video signal, and cover what
+the driver writer considers the complete picture. Drivers shall reset
+the source rectangle to the default when the driver is first loaded,
+but not later.</para>
+
+      <para>For output devices these structures and ioctls are used
+accordingly, defining the <emphasis>target</emphasis> rectangle where
+the images will be inserted into the video signal.</para>
+
+    </section>
+
+    <section>
+      <title>Scaling Adjustments</title>
+
+      <para>Video hardware can have various cropping, insertion and
+scaling limitations. It may only scale up or down, support only
+discrete scaling factors, or have different scaling abilities in
+horizontal and vertical direction. Also it may not support scaling at
+all. At the same time the &v4l2-crop; rectangle may have to be
+aligned, and both the source and target rectangles may have arbitrary
+upper and lower size limits. In particular the maximum
+<structfield>width</structfield> and <structfield>height</structfield>
+in &v4l2-crop; may be smaller than the
+&v4l2-cropcap;.<structfield>bounds</structfield> area. Therefore, as
+usual, drivers are expected to adjust the requested parameters and
+return the actual values selected.</para>
+
+      <para>Applications can change the source or the target rectangle
+first, as they may prefer a particular image size or a certain area in
+the video signal. If the driver has to adjust both to satisfy hardware
+limitations, the last requested rectangle shall take priority, and the
+driver should preferably adjust the opposite one. The &VIDIOC-TRY-FMT;
+ioctl however shall not change the driver state and therefore only
+adjust the requested rectangle.</para>
+
+      <para>Suppose scaling on a video capture device is restricted to
+a factor 1:1 or 2:1 in either direction and the target image size must
+be a multiple of 16&nbsp;&times;&nbsp;16 pixels. The source cropping
+rectangle is set to defaults, which are also the upper limit in this
+example, of 640&nbsp;&times;&nbsp;400 pixels at offset 0,&nbsp;0. An
+application requests an image size of 300&nbsp;&times;&nbsp;225
+pixels, assuming video will be scaled down from the "full picture"
+accordingly. The driver sets the image size to the closest possible
+values 304&nbsp;&times;&nbsp;224, then chooses the cropping rectangle
+closest to the requested size, that is 608&nbsp;&times;&nbsp;224
+(224&nbsp;&times;&nbsp;2:1 would exceed the limit 400). The offset
+0,&nbsp;0 is still valid, thus unmodified. Given the default cropping
+rectangle reported by <constant>VIDIOC_CROPCAP</constant> the
+application can easily propose another offset to center the cropping
+rectangle.</para>
+
+      <para>Now the application may insist on covering an area using a
+picture aspect ratio closer to the original request, so it asks for a
+cropping rectangle of 608&nbsp;&times;&nbsp;456 pixels. The present
+scaling factors limit cropping to 640&nbsp;&times;&nbsp;384, so the
+driver returns the cropping size 608&nbsp;&times;&nbsp;384 and adjusts
+the image size to closest possible 304&nbsp;&times;&nbsp;192.</para>
+
+    </section>
+
+    <section>
+      <title>Examples</title>
+
+      <para>Source and target rectangles shall remain unchanged across
+closing and reopening a device, such that piping data into or out of a
+device will work without special preparations. More advanced
+applications should ensure the parameters are suitable before starting
+I/O.</para>
+
+      <example>
+	<title>Resetting the cropping parameters</title>
+
+	<para>(A video capture device is assumed; change
+<constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant> for other
+devices.)</para>
+
+	<programlisting>
+&v4l2-cropcap; cropcap;
+&v4l2-crop; crop;
+
+memset (&amp;cropcap, 0, sizeof (cropcap));
+cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+if (-1 == ioctl (fd, &VIDIOC-CROPCAP;, &amp;cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+}
+
+memset (&amp;crop, 0, sizeof (crop));
+crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+crop.c = cropcap.defrect;
+
+/* Ignore if cropping is not supported (EINVAL). */
+
+if (-1 == ioctl (fd, &VIDIOC-S-CROP;, &amp;crop)
+    &amp;&amp; errno != EINVAL) {
+	perror ("VIDIOC_S_CROP");
+	exit (EXIT_FAILURE);
+}
+      </programlisting>
+      </example>
+
+      <example>
+	<title>Simple downscaling</title>
+
+	<para>(A video capture device is assumed.)</para>
+
+	<programlisting>
+&v4l2-cropcap; cropcap;
+&v4l2-format; format;
+
+reset_cropping_parameters ();
+
+/* Scale down to 1/4 size of full picture. */
+
+memset (&amp;format, 0, sizeof (format)); /* defaults */
+
+format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+format.fmt.pix.width = cropcap.defrect.width &gt;&gt; 1;
+format.fmt.pix.height = cropcap.defrect.height &gt;&gt; 1;
+format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+
+if (-1 == ioctl (fd, &VIDIOC-S-FMT;, &amp;format)) {
+	perror ("VIDIOC_S_FORMAT");
+	exit (EXIT_FAILURE);
+}
+
+/* We could check the actual image size now, the actual scaling factor
+   or if the driver can scale at all. */
+	</programlisting>
+      </example>
+
+      <example>
+	<title>Selecting an output area</title>
+
+	<programlisting>
+&v4l2-cropcap; cropcap;
+&v4l2-crop; crop;
+
+memset (&amp;cropcap, 0, sizeof (cropcap));
+cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &amp;cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+}
+
+memset (&amp;crop, 0, sizeof (crop));
+
+crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+crop.c = cropcap.defrect;
+
+/* Scale the width and height to 50 % of their original size
+   and center the output. */
+
+crop.c.width /= 2;
+crop.c.height /= 2;
+crop.c.left += crop.c.width / 2;
+crop.c.top += crop.c.height / 2;
+
+/* Ignore if cropping is not supported (EINVAL). */
+
+if (-1 == ioctl (fd, VIDIOC_S_CROP, &amp;crop)
+    &amp;&amp; errno != EINVAL) {
+	perror ("VIDIOC_S_CROP");
+	exit (EXIT_FAILURE);
+}
+</programlisting>
+      </example>
+
+      <example>
+	<title>Current scaling factor and pixel aspect</title>
+
+	<para>(A video capture device is assumed.)</para>
+
+	<programlisting>
+&v4l2-cropcap; cropcap;
+&v4l2-crop; crop;
+&v4l2-format; format;
+double hscale, vscale;
+double aspect;
+int dwidth, dheight;
+
+memset (&amp;cropcap, 0, sizeof (cropcap));
+cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+if (-1 == ioctl (fd, &VIDIOC-CROPCAP;, &amp;cropcap)) {
+	perror ("VIDIOC_CROPCAP");
+	exit (EXIT_FAILURE);
+}
+
+memset (&amp;crop, 0, sizeof (crop));
+crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+if (-1 == ioctl (fd, &VIDIOC-G-CROP;, &amp;crop)) {
+	if (errno != EINVAL) {
+		perror ("VIDIOC_G_CROP");
+		exit (EXIT_FAILURE);
+	}
+
+	/* Cropping not supported. */
+	crop.c = cropcap.defrect;
+}
+
+memset (&amp;format, 0, sizeof (format));
+format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+if (-1 == ioctl (fd, &VIDIOC-G-FMT;, &amp;format)) {
+	perror ("VIDIOC_G_FMT");
+	exit (EXIT_FAILURE);
+}
+
+/* The scaling applied by the driver. */
+
+hscale = format.fmt.pix.width / (double) crop.c.width;
+vscale = format.fmt.pix.height / (double) crop.c.height;
+
+aspect = cropcap.pixelaspect.numerator /
+	 (double) cropcap.pixelaspect.denominator;
+aspect = aspect * hscale / vscale;
+
+/* Devices following ITU-R BT.601 do not capture
+   square pixels. For playback on a computer monitor
+   we should scale the images to this size. */
+
+dwidth = format.fmt.pix.width / aspect;
+dheight = format.fmt.pix.height;
+	</programlisting>
+      </example>
+    </section>
+  </section>
+
+  &sub-selection-api;
+
+  <section id="streaming-par">
+    <title>Streaming Parameters</title>
+
+    <para>Streaming parameters are intended to optimize the video
+capture process as well as I/O. Presently applications can request a
+high quality capture mode with the &VIDIOC-S-PARM; ioctl.</para>
+
+    <para>The current video standard determines a nominal number of
+frames per second. If less than this number of frames is to be
+captured or output, applications can request frame skipping or
+duplicating on the driver side. This is especially useful when using
+the &func-read; or &func-write;, which are not augmented by timestamps
+or sequence counters, and to avoid unnecessary data copying.</para>
+
+    <para>Finally these ioctls can be used to determine the number of
+buffers used internally by a driver in read/write mode. For
+implications see the section discussing the &func-read;
+function.</para>
+
+    <para>To get and set the streaming parameters applications call
+the &VIDIOC-G-PARM; and &VIDIOC-S-PARM; ioctl, respectively. They take
+a pointer to a &v4l2-streamparm;, which contains a union holding
+separate parameters for input and output devices.</para>
+
+    <para>These ioctls are optional, drivers need not implement
+them. If so, they return the &EINVAL;.</para>
+  </section>

linux-imx/Documentation/DocBook/media/v4l/compat.xml

diff --git a/linux-imx/Documentation/DocBook/media/v4l/compat.xml b/linux-imx/Documentation/DocBook/media/v4l/compat.xml
new file mode 100644
index 0000000..f43542a
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/v4l/compat.xml
@@ -0,0 +1,2660 @@
+  <title>Changes</title>
+
+  <para>The following chapters document the evolution of the V4L2 API,
+errata or extensions. They are also intended to help application and
+driver writers to port or update their code.</para>
+
+  <section id="diff-v4l">
+    <title>Differences between V4L and V4L2</title>
+
+    <para>The Video For Linux API was first introduced in Linux 2.1 to
+unify and replace various TV and radio device related interfaces,
+developed independently by driver writers in prior years. Starting
+with Linux 2.5 the much improved V4L2 API replaces the V4L API.
+The support for the old V4L calls were removed from Kernel, but the
+library <xref linkend="libv4l" /> supports the conversion of a V4L
+API system call into a V4L2 one.</para>
+
+    <section>
+      <title>Opening and Closing Devices</title>
+
+      <para>For compatibility reasons the character device file names
+recommended for V4L2 video capture, overlay, radio and raw
+vbi capture devices did not change from those used by V4L. They are
+listed in <xref linkend="devices" /> and below in <xref
+	  linkend="v4l-dev" />.</para>
+
+      <para>The teletext devices (minor range 192-223) have been removed in
+V4L2 and no longer exist. There is no hardware available anymore for handling
+pure teletext. Instead raw or sliced VBI is used.</para>
+
+      <para>The V4L <filename>videodev</filename> module automatically
+assigns minor numbers to drivers in load order, depending on the
+registered device type. We recommend that V4L2 drivers by default
+register devices with the same numbers, but the system administrator
+can assign arbitrary minor numbers using driver module options. The
+major device number remains 81.</para>
+
+      <table id="v4l-dev">
+	<title>V4L Device Types, Names and Numbers</title>
+	<tgroup cols="3">
+	  <thead>
+	    <row>
+	      <entry>Device Type</entry>
+	      <entry>File Name</entry>
+	      <entry>Minor Numbers</entry>
+	    </row>
+	  </thead>
+	  <tbody valign="top">
+	    <row>
+	      <entry>Video capture and overlay</entry>
+	      <entry><para><filename>/dev/video</filename> and
+<filename>/dev/bttv0</filename><footnote> <para>According to
+Documentation/devices.txt these should be symbolic links to
+<filename>/dev/video0</filename>. Note the original bttv interface is
+not compatible with V4L or V4L2.</para> </footnote>,
+<filename>/dev/video0</filename> to
+<filename>/dev/video63</filename></para></entry>
+	      <entry>0-63</entry>
+	    </row>
+	    <row>
+	      <entry>Radio receiver</entry>
+	      <entry><para><filename>/dev/radio</filename><footnote>
+		    <para>According to
+<filename>Documentation/devices.txt</filename> a symbolic link to
+<filename>/dev/radio0</filename>.</para>
+		  </footnote>, <filename>/dev/radio0</filename> to
+<filename>/dev/radio63</filename></para></entry>
+	      <entry>64-127</entry>
+	    </row>
+	    <row>
+	      <entry>Raw VBI capture</entry>
+	      <entry><para><filename>/dev/vbi</filename>,
+<filename>/dev/vbi0</filename> to
+<filename>/dev/vbi31</filename></para></entry>
+	      <entry>224-255</entry>
+	    </row>
+	  </tbody>
+	</tgroup>
+      </table>
+
+      <para>V4L prohibits (or used to prohibit) multiple opens of a
+device file. V4L2 drivers <emphasis>may</emphasis> support multiple
+opens, see <xref linkend="open" /> for details and consequences.</para>
+
+      <para>V4L drivers respond to V4L2 ioctls with an &EINVAL;.</para>
+    </section>
+
+    <section>
+      <title>Querying Capabilities</title>
+
+      <para>The V4L <constant>VIDIOCGCAP</constant> ioctl is
+equivalent to V4L2's &VIDIOC-QUERYCAP;.</para>
+
+      <para>The <structfield>name</structfield> field in struct
+<structname>video_capability</structname> became
+<structfield>card</structfield> in &v4l2-capability;,
+<structfield>type</structfield> was replaced by
+<structfield>capabilities</structfield>. Note V4L2 does not
+distinguish between device types like this, better think of basic
+video input, video output and radio devices supporting a set of
+related functions like video capturing, video overlay and VBI
+capturing. See <xref linkend="open" /> for an
+introduction.<informaltable>
+	  <tgroup cols="3">
+	    <thead>
+	      <row>
+		<entry>struct
+<structname>video_capability</structname>
+<structfield>type</structfield></entry>
+		<entry>&v4l2-capability;
+<structfield>capabilities</structfield> flags</entry>
+		<entry>Purpose</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry><constant>VID_TYPE_CAPTURE</constant></entry>
+		<entry><constant>V4L2_CAP_VIDEO_CAPTURE</constant></entry>
+		<entry>The <link linkend="capture">video
+capture</link> interface is supported.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_TUNER</constant></entry>
+		<entry><constant>V4L2_CAP_TUNER</constant></entry>
+		<entry>The device has a <link linkend="tuner">tuner or
+modulator</link>.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_TELETEXT</constant></entry>
+		<entry><constant>V4L2_CAP_VBI_CAPTURE</constant></entry>
+		<entry>The <link linkend="raw-vbi">raw VBI
+capture</link> interface is supported.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_OVERLAY</constant></entry>
+		<entry><constant>V4L2_CAP_VIDEO_OVERLAY</constant></entry>
+		<entry>The <link linkend="overlay">video
+overlay</link> interface is supported.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_CHROMAKEY</constant></entry>
+		<entry><constant>V4L2_FBUF_CAP_CHROMAKEY</constant> in
+field <structfield>capability</structfield> of
+&v4l2-framebuffer;</entry>
+		<entry>Whether chromakey overlay is supported. For
+more information on overlay see
+<xref linkend="overlay" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_CLIPPING</constant></entry>
+		<entry><constant>V4L2_FBUF_CAP_LIST_CLIPPING</constant>
+and <constant>V4L2_FBUF_CAP_BITMAP_CLIPPING</constant> in field
+<structfield>capability</structfield> of &v4l2-framebuffer;</entry>
+		<entry>Whether clipping the overlaid image is
+supported, see <xref linkend="overlay" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_FRAMERAM</constant></entry>
+		<entry><constant>V4L2_FBUF_CAP_EXTERNOVERLAY</constant>
+<emphasis>not set</emphasis> in field
+<structfield>capability</structfield> of &v4l2-framebuffer;</entry>
+		<entry>Whether overlay overwrites frame buffer memory,
+see <xref linkend="overlay" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_SCALES</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>This flag indicates if the hardware can scale
+images. The V4L2 API implies the scale factor by setting the cropping
+dimensions and image size with the &VIDIOC-S-CROP; and &VIDIOC-S-FMT;
+ioctl, respectively. The driver returns the closest sizes possible.
+For more information on cropping and scaling see <xref
+		    linkend="crop" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_MONOCHROME</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>Applications can enumerate the supported image
+formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device
+supports grey scale capturing only. For more information on image
+formats see <xref linkend="pixfmt" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_SUBCAPTURE</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>Applications can call the &VIDIOC-G-CROP; ioctl
+to determine if the device supports capturing a subsection of the full
+picture ("cropping" in V4L2). If not, the ioctl returns the &EINVAL;.
+For more information on cropping and scaling see <xref
+		    linkend="crop" />.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_MPEG_DECODER</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>Applications can enumerate the supported image
+formats with the &VIDIOC-ENUM-FMT; ioctl to determine if the device
+supports MPEG streams.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_MPEG_ENCODER</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>See above.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_MJPEG_DECODER</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>See above.</entry>
+	      </row>
+	      <row>
+		<entry><constant>VID_TYPE_MJPEG_ENCODER</constant></entry>
+		<entry><constant>-</constant></entry>
+		<entry>See above.</entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable></para>
+
+      <para>The <structfield>audios</structfield> field was replaced
+by <structfield>capabilities</structfield> flag
+<constant>V4L2_CAP_AUDIO</constant>, indicating
+<emphasis>if</emphasis> the device has any audio inputs or outputs. To
+determine their number applications can enumerate audio inputs with
+the &VIDIOC-G-AUDIO; ioctl. The audio ioctls are described in <xref
+	  linkend="audio" />.</para>
+
+      <para>The <structfield>maxwidth</structfield>,
+<structfield>maxheight</structfield>,
+<structfield>minwidth</structfield> and
+<structfield>minheight</structfield> fields were removed. Calling the
+&VIDIOC-S-FMT; or &VIDIOC-TRY-FMT; ioctl with the desired dimensions
+returns the closest size possible, taking into account the current
+video standard, cropping and scaling limitations.</para>
+    </section>
+
+    <section>
+      <title>Video Sources</title>
+
+      <para>V4L provides the <constant>VIDIOCGCHAN</constant> and
+<constant>VIDIOCSCHAN</constant> ioctl using struct
+<structname>video_channel</structname> to enumerate
+the video inputs of a V4L device. The equivalent V4L2 ioctls
+are &VIDIOC-ENUMINPUT;, &VIDIOC-G-INPUT; and &VIDIOC-S-INPUT;
+using &v4l2-input; as discussed in <xref linkend="video" />.</para>
+
+      <para>The <structfield>channel</structfield> field counting
+inputs was renamed to <structfield>index</structfield>, the video
+input types were renamed as follows: <informaltable>
+	  <tgroup cols="2">
+	    <thead>
+	      <row>
+		<entry>struct <structname>video_channel</structname>
+<structfield>type</structfield></entry>
+		<entry>&v4l2-input;
+<structfield>type</structfield></entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry><constant>VIDEO_TYPE_TV</constant></entry>
+		<entry><constant>V4L2_INPUT_TYPE_TUNER</constant></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_TYPE_CAMERA</constant></entry>
+		<entry><constant>V4L2_INPUT_TYPE_CAMERA</constant></entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable></para>
+
+      <para>Unlike the <structfield>tuners</structfield> field
+expressing the number of tuners of this input, V4L2 assumes each video
+input is connected to at most one tuner. However a tuner can have more
+than one input, &ie; RF connectors, and a device can have multiple
+tuners. The index number of the tuner associated with the input, if
+any, is stored in field <structfield>tuner</structfield> of
+&v4l2-input;. Enumeration of tuners is discussed in <xref
+	  linkend="tuner" />.</para>
+
+      <para>The redundant <constant>VIDEO_VC_TUNER</constant> flag was
+dropped. Video inputs associated with a tuner are of type
+<constant>V4L2_INPUT_TYPE_TUNER</constant>. The
+<constant>VIDEO_VC_AUDIO</constant> flag was replaced by the
+<structfield>audioset</structfield> field. V4L2 considers devices with
+up to 32 audio inputs. Each set bit in the
+<structfield>audioset</structfield> field represents one audio input
+this video input combines with. For information about audio inputs and
+how to switch between them see <xref linkend="audio" />.</para>
+
+      <para>The <structfield>norm</structfield> field describing the
+supported video standards was replaced by
+<structfield>std</structfield>. The V4L specification mentions a flag
+<constant>VIDEO_VC_NORM</constant> indicating whether the standard can
+be changed. This flag was a later addition together with the
+<structfield>norm</structfield> field and has been removed in the
+meantime. V4L2 has a similar, albeit more comprehensive approach
+to video standards, see <xref linkend="standard" /> for more
+information.</para>
+    </section>
+
+    <section>
+      <title>Tuning</title>
+
+      <para>The V4L <constant>VIDIOCGTUNER</constant> and
+<constant>VIDIOCSTUNER</constant> ioctl and struct
+<structname>video_tuner</structname> can be used to enumerate the
+tuners of a V4L TV or radio device. The equivalent V4L2 ioctls are
+&VIDIOC-G-TUNER; and &VIDIOC-S-TUNER; using &v4l2-tuner;. Tuners are
+covered in <xref linkend="tuner" />.</para>
+
+      <para>The <structfield>tuner</structfield> field counting tuners
+was renamed to <structfield>index</structfield>. The fields
+<structfield>name</structfield>, <structfield>rangelow</structfield>
+and <structfield>rangehigh</structfield> remained unchanged.</para>
+
+      <para>The <constant>VIDEO_TUNER_PAL</constant>,
+<constant>VIDEO_TUNER_NTSC</constant> and
+<constant>VIDEO_TUNER_SECAM</constant> flags indicating the supported
+video standards were dropped. This information is now contained in the
+associated &v4l2-input;. No replacement exists for the
+<constant>VIDEO_TUNER_NORM</constant> flag indicating whether the
+video standard can be switched. The <structfield>mode</structfield>
+field to select a different video standard was replaced by a whole new
+set of ioctls and structures described in <xref linkend="standard" />.
+Due to its ubiquity it should be mentioned the BTTV driver supports
+several standards in addition to the regular
+<constant>VIDEO_MODE_PAL</constant> (0),
+<constant>VIDEO_MODE_NTSC</constant>,
+<constant>VIDEO_MODE_SECAM</constant> and
+<constant>VIDEO_MODE_AUTO</constant> (3). Namely N/PAL Argentina,
+M/PAL, N/PAL, and NTSC Japan with numbers 3-6 (sic).</para>
+
+      <para>The <constant>VIDEO_TUNER_STEREO_ON</constant> flag
+indicating stereo reception became
+<constant>V4L2_TUNER_SUB_STEREO</constant> in field
+<structfield>rxsubchans</structfield>. This field also permits the
+detection of monaural and bilingual audio, see the definition of
+&v4l2-tuner; for details. Presently no replacement exists for the
+<constant>VIDEO_TUNER_RDS_ON</constant> and
+<constant>VIDEO_TUNER_MBS_ON</constant> flags.</para>
+
+      <para> The <constant>VIDEO_TUNER_LOW</constant> flag was renamed
+to <constant>V4L2_TUNER_CAP_LOW</constant> in the &v4l2-tuner;
+<structfield>capability</structfield> field.</para>
+
+      <para>The <constant>VIDIOCGFREQ</constant> and
+<constant>VIDIOCSFREQ</constant> ioctl to change the tuner frequency
+where renamed to &VIDIOC-G-FREQUENCY; and  &VIDIOC-S-FREQUENCY;. They
+take a pointer to a &v4l2-frequency; instead of an unsigned long
+integer.</para>
+    </section>
+
+    <section id="v4l-image-properties">
+      <title>Image Properties</title>
+
+      <para>V4L2 has no equivalent of the
+<constant>VIDIOCGPICT</constant> and <constant>VIDIOCSPICT</constant>
+ioctl and struct <structname>video_picture</structname>. The following
+fields where replaced by V4L2 controls accessible with the
+&VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls:<informaltable>
+	  <tgroup cols="2">
+	    <thead>
+	      <row>
+		<entry>struct <structname>video_picture</structname></entry>
+		<entry>V4L2 Control ID</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry><structfield>brightness</structfield></entry>
+		<entry><constant>V4L2_CID_BRIGHTNESS</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>hue</structfield></entry>
+		<entry><constant>V4L2_CID_HUE</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>colour</structfield></entry>
+		<entry><constant>V4L2_CID_SATURATION</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>contrast</structfield></entry>
+		<entry><constant>V4L2_CID_CONTRAST</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>whiteness</structfield></entry>
+		<entry><constant>V4L2_CID_WHITENESS</constant></entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable></para>
+
+      <para>The V4L picture controls are assumed to range from 0 to
+65535 with no particular reset value. The V4L2 API permits arbitrary
+limits and defaults which can be queried with the &VIDIOC-QUERYCTRL;
+ioctl. For general information about controls see <xref
+linkend="control" />.</para>
+
+      <para>The <structfield>depth</structfield> (average number of
+bits per pixel) of a video image is implied by the selected image
+format. V4L2 does not explicitely provide such information assuming
+applications recognizing the format are aware of the image depth and
+others need not know. The <structfield>palette</structfield> field
+moved into the &v4l2-pix-format;:<informaltable>
+	  <tgroup cols="2">
+	    <thead>
+	      <row>
+		<entry>struct <structname>video_picture</structname>
+<structfield>palette</structfield></entry>
+		<entry>&v4l2-pix-format;
+<structfield>pixfmt</structfield></entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry><constant>VIDEO_PALETTE_GREY</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-GREY"><constant>V4L2_PIX_FMT_GREY</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_HI240</constant></entry>
+		<entry><para><link
+linkend="pixfmt-reserved"><constant>V4L2_PIX_FMT_HI240</constant></link><footnote>
+		      <para>This is a custom format used by the BTTV
+driver, not one of the V4L2 standard formats.</para>
+		    </footnote></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_RGB565</constant></entry>
+		<entry><para><link
+linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_RGB565</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_RGB555</constant></entry>
+		<entry><para><link
+linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_RGB555</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_RGB24</constant></entry>
+		<entry><para><link
+linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_RGB32</constant></entry>
+		<entry><para><link
+linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
+		      <para>Presumably all V4L RGB formats are
+little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
+swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
+		    </footnote></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV422</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YUYV"><constant>V4L2_PIX_FMT_YUYV</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><para><constant>VIDEO_PALETTE_YUYV</constant><footnote>
+		      <para><constant>VIDEO_PALETTE_YUV422</constant>
+and <constant>VIDEO_PALETTE_YUYV</constant> are the same formats. Some
+V4L drivers respond to one, some to the other.</para>
+		    </footnote></para></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YUYV"><constant>V4L2_PIX_FMT_YUYV</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_UYVY</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-UYVY"><constant>V4L2_PIX_FMT_UYVY</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV420</constant></entry>
+		<entry>None</entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV411</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-Y41P"><constant>V4L2_PIX_FMT_Y41P</constant></link><footnote>
+		      <para>Not to be confused with
+<constant>V4L2_PIX_FMT_YUV411P</constant>, which is a planar
+format.</para> </footnote></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_RAW</constant></entry>
+		<entry><para>None<footnote> <para>V4L explains this
+as: "RAW capture (BT848)"</para> </footnote></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV422P</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YUV422P"><constant>V4L2_PIX_FMT_YUV422P</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV411P</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YUV411P"><constant>V4L2_PIX_FMT_YUV411P</constant></link><footnote>
+		      <para>Not to be confused with
+<constant>V4L2_PIX_FMT_Y41P</constant>, which is a packed
+format.</para> </footnote></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV420P</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YVU420"><constant>V4L2_PIX_FMT_YVU420</constant></link></para></entry>
+	      </row>
+	      <row>
+		<entry><constant>VIDEO_PALETTE_YUV410P</constant></entry>
+		<entry><para><link
+linkend="V4L2-PIX-FMT-YVU410"><constant>V4L2_PIX_FMT_YVU410</constant></link></para></entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable></para>
+
+      <para>V4L2 image formats are defined in <xref
+linkend="pixfmt" />. The image format can be selected with the
+&VIDIOC-S-FMT; ioctl.</para>
+    </section>
+
+    <section>
+      <title>Audio</title>
+
+      <para>The <constant>VIDIOCGAUDIO</constant> and
+<constant>VIDIOCSAUDIO</constant> ioctl and struct
+<structname>video_audio</structname> are used to enumerate the
+audio inputs of a V4L device. The equivalent V4L2 ioctls are
+&VIDIOC-G-AUDIO; and &VIDIOC-S-AUDIO; using &v4l2-audio; as
+discussed in <xref linkend="audio" />.</para>
+
+      <para>The <structfield>audio</structfield> "channel number"
+field counting audio inputs was renamed to
+<structfield>index</structfield>.</para>
+
+      <para>On <constant>VIDIOCSAUDIO</constant> the
+<structfield>mode</structfield> field selects <emphasis>one</emphasis>
+of the <constant>VIDEO_SOUND_MONO</constant>,
+<constant>VIDEO_SOUND_STEREO</constant>,
+<constant>VIDEO_SOUND_LANG1</constant> or
+<constant>VIDEO_SOUND_LANG2</constant> audio demodulation modes. When
+the current audio standard is BTSC
+<constant>VIDEO_SOUND_LANG2</constant> refers to SAP and
+<constant>VIDEO_SOUND_LANG1</constant> is meaningless. Also
+undocumented in the V4L specification, there is no way to query the
+selected mode. On <constant>VIDIOCGAUDIO</constant> the driver returns
+the <emphasis>actually received</emphasis> audio programmes in this
+field. In the V4L2 API this information is stored in the &v4l2-tuner;
+<structfield>rxsubchans</structfield> and
+<structfield>audmode</structfield> fields, respectively. See <xref
+linkend="tuner" /> for more information on tuners. Related to audio
+modes &v4l2-audio; also reports if this is a mono or stereo
+input, regardless if the source is a tuner.</para>
+
+      <para>The following fields where replaced by V4L2 controls
+accessible with the &VIDIOC-QUERYCTRL;, &VIDIOC-G-CTRL; and
+&VIDIOC-S-CTRL; ioctls:<informaltable>
+	  <tgroup cols="2">
+	    <thead>
+	      <row>
+		<entry>struct
+<structname>video_audio</structname></entry>
+		<entry>V4L2 Control ID</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry><structfield>volume</structfield></entry>
+		<entry><constant>V4L2_CID_AUDIO_VOLUME</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>bass</structfield></entry>
+		<entry><constant>V4L2_CID_AUDIO_BASS</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>treble</structfield></entry>
+		<entry><constant>V4L2_CID_AUDIO_TREBLE</constant></entry>
+	      </row>
+	      <row>
+		<entry><structfield>balance</structfield></entry>
+		<entry><constant>V4L2_CID_AUDIO_BALANCE</constant></entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable></para>
+
+      <para>To determine which of these controls are supported by a
+driver V4L provides the <structfield>flags</structfield>
+<constant>VIDEO_AUDIO_VOLUME</constant>,
+<constant>VIDEO_AUDIO_BASS</constant>,
+<constant>VIDEO_AUDIO_TREBLE</constant> and
+<constant>VIDEO_AUDIO_BALANCE</constant>. In the V4L2 API the
+&VIDIOC-QUERYCTRL; ioctl reports if the respective control is
+supported. Accordingly the <constant>VIDEO_AUDIO_MUTABLE</constant>
+and <constant>VIDEO_AUDIO_MUTE</constant> flags where replaced by the
+boolean <constant>V4L2_CID_AUDIO_MUTE</constant> control.</para>
+
+      <para>All V4L2 controls have a <structfield>step</structfield>
+attribute replacing the struct <structname>video_audio</structname>
+<structfield>step</structfield> field. The V4L audio controls are
+assumed to range from 0 to 65535 with no particular reset value. The
+V4L2 API permits arbitrary limits and defaults which can be queried
+with the &VIDIOC-QUERYCTRL; ioctl. For general information about
+controls see <xref linkend="control" />.</para>
+    </section>
+
+    <section>
+      <title>Frame Buffer Overlay</title>
+
+      <para>The V4L2 ioctls equivalent to
+<constant>VIDIOCGFBUF</constant> and <constant>VIDIOCSFBUF</constant>
+are &VIDIOC-G-FBUF; and &VIDIOC-S-FBUF;. The
+<structfield>base</structfield> field of struct
+<structname>video_buffer</structname> remained unchanged, except V4L2
+defines a flag to indicate non-destructive overlays instead of a
+<constant>NULL</constant> pointer. All other fields moved into the
+&v4l2-pix-format; <structfield>fmt</structfield> substructure of
+&v4l2-framebuffer;. The <structfield>depth</structfield> field was
+replaced by <structfield>pixelformat</structfield>. See <xref
+	  linkend="pixfmt-rgb" /> for a list of RGB formats and their
+respective color depths.</para>
+
+      <para>Instead of the special ioctls
+<constant>VIDIOCGWIN</constant> and <constant>VIDIOCSWIN</constant>
+V4L2 uses the general-purpose data format negotiation ioctls
+&VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a
+&v4l2-format; as argument. Here the <structfield>win</structfield>
+member of the <structfield>fmt</structfield> union is used, a
+&v4l2-window;.</para>
+
+      <para>The <structfield>x</structfield>,
+<structfield>y</structfield>, <structfield>width</structfield> and
+<structfield>height</structfield> fields of struct
+<structname>video_window</structname> moved into &v4l2-rect;
+substructure <structfield>w</structfield> of struct
+<structname>v4l2_window</structname>. The
+<structfield>chromakey</structfield>,
+<structfield>clips</structfield>, and
+<structfield>clipcount</structfield> fields remained unchanged. Struct
+<structname>video_clip</structname> was renamed to &v4l2-clip;, also
+containing a struct <structname>v4l2_rect</structname>, but the
+semantics are still the same.</para>
+
+      <para>The <constant>VIDEO_WINDOW_INTERLACE</constant> flag was
+dropped. Instead applications must set the
+<structfield>field</structfield> field to
+<constant>V4L2_FIELD_ANY</constant> or
+<constant>V4L2_FIELD_INTERLACED</constant>. The
+<constant>VIDEO_WINDOW_CHROMAKEY</constant> flag moved into
+&v4l2-framebuffer;, under the new name
+<constant>V4L2_FBUF_FLAG_CHROMAKEY</constant>.</para>
+
+      <para>In V4L, storing a bitmap pointer in
+<structfield>clips</structfield> and setting
+<structfield>clipcount</structfield> to
+<constant>VIDEO_CLIP_BITMAP</constant> (-1) requests bitmap
+clipping, using a fixed size bitmap of 1024 &times; 625 bits. Struct
+<structname>v4l2_window</structname> has a separate
+<structfield>bitmap</structfield> pointer field for this purpose and
+the bitmap size is determined by <structfield>w.width</structfield> and
+<structfield>w.height</structfield>.</para>
+
+      <para>The <constant>VIDIOCCAPTURE</constant> ioctl to enable or
+disable overlay was renamed to &VIDIOC-OVERLAY;.</para>
+    </section>
+
+    <section>
+      <title>Cropping</title>
+
+      <para>To capture only a subsection of the full picture V4L
+defines the <constant>VIDIOCGCAPTURE</constant> and
+<constant>VIDIOCSCAPTURE</constant> ioctls using struct
+<structname>video_capture</structname>. The equivalent V4L2 ioctls are
+&VIDIOC-G-CROP; and &VIDIOC-S-CROP; using &v4l2-crop;, and the related
+&VIDIOC-CROPCAP; ioctl. This is a rather complex matter, see
+<xref linkend="crop" /> for details.</para>
+
+      <para>The <structfield>x</structfield>,
+<structfield>y</structfield>, <structfield>width</structfield> and
+<structfield>height</structfield> fields moved into &v4l2-rect;
+substructure <structfield>c</structfield> of struct
+<structname>v4l2_crop</structname>. The
+<structfield>decimation</structfield> field was dropped. In the V4L2
+API the scaling factor is implied by the size of the cropping
+rectangle and the size of the captured or overlaid image.</para>
+
+      <para>The <constant>VIDEO_CAPTURE_ODD</constant>
+and <constant>VIDEO_CAPTURE_EVEN</constant> flags to capture only the
+odd or even field, respectively, were replaced by
+<constant>V4L2_FIELD_TOP</constant> and
+<constant>V4L2_FIELD_BOTTOM</constant> in the field named
+<structfield>field</structfield> of &v4l2-pix-format; and
+&v4l2-window;. These structures are used to select a capture or
+overlay format with the &VIDIOC-S-FMT; ioctl.</para>
+    </section>
+
+    <section>
+      <title>Reading Images, Memory Mapping</title>
+
+      <section>
+	<title>Capturing using the read method</title>
+
+	<para>There is no essential difference between reading images
+from a V4L or V4L2 device using the &func-read; function, however V4L2
+drivers are not required to support this I/O method. Applications can
+determine if the function is available with the &VIDIOC-QUERYCAP;
+ioctl. All V4L2 devices exchanging data with applications must support
+the &func-select; and &func-poll; functions.</para>
+
+	<para>To select an image format and size, V4L provides the
+<constant>VIDIOCSPICT</constant> and <constant>VIDIOCSWIN</constant>
+ioctls. V4L2 uses the general-purpose data format negotiation ioctls
+&VIDIOC-G-FMT; and &VIDIOC-S-FMT;. They take a pointer to a
+&v4l2-format; as argument, here the &v4l2-pix-format; named
+<structfield>pix</structfield> of its <structfield>fmt</structfield>
+union is used.</para>
+
+	<para>For more information about the V4L2 read interface see
+<xref linkend="rw" />.</para>
+      </section>
+      <section>
+	<title>Capturing using memory mapping</title>
+
+	<para>Applications can read from V4L devices by mapping
+buffers in device memory, or more often just buffers allocated in
+DMA-able system memory, into their address space. This avoids the data
+copying overhead of the read method. V4L2 supports memory mapping as
+well, with a few differences.</para>
+
+	<informaltable>
+	  <tgroup cols="2">
+	    <thead>
+	      <row>
+		<entry>V4L</entry>
+		<entry>V4L2</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row>
+		<entry></entry>
+		<entry>The image format must be selected before
+buffers are allocated, with the &VIDIOC-S-FMT; ioctl. When no format
+is selected the driver may use the last, possibly by another
+application requested format.</entry>
+	      </row>
+	      <row>
+		<entry><para>Applications cannot change the number of
+buffers. The it is built into the driver, unless it has a module
+option to change the number when the driver module is
+loaded.</para></entry>
+		<entry><para>The &VIDIOC-REQBUFS; ioctl allocates the
+desired number of buffers, this is a required step in the initialization
+sequence.</para></entry>
+	      </row>
+	      <row>
+		<entry><para>Drivers map all buffers as one contiguous
+range of memory. The <constant>VIDIOCGMBUF</constant> ioctl is
+available to query the number of buffers, the offset of each buffer
+from the start of the virtual file, and the overall amount of memory
+used, which can be used as arguments for the &func-mmap;
+function.</para></entry>
+		<entry><para>Buffers are individually mapped. The
+offset and size of each buffer can be determined with the
+&VIDIOC-QUERYBUF; ioctl.</para></entry>
+	      </row>
+	      <row>
+		<entry><para>The <constant>VIDIOCMCAPTURE</constant>
+ioctl prepares a buffer for capturing. It also determines the image
+format for this buffer. The ioctl returns immediately, eventually with
+an &EAGAIN; if no video signal had been detected. When the driver
+supports more than one buffer applications can call the ioctl multiple
+times and thus have multiple outstanding capture
+requests.</para><para>The <constant>VIDIOCSYNC</constant> ioctl
+suspends execution until a particular buffer has been
+filled.</para></entry>
+		<entry><para>Drivers maintain an incoming and outgoing
+queue. &VIDIOC-QBUF; enqueues any empty buffer into the incoming
+queue. Filled buffers are dequeued from the outgoing queue with the
+&VIDIOC-DQBUF; ioctl. To wait until filled buffers become available this
+function, &func-select; or &func-poll; can be used. The
+&VIDIOC-STREAMON; ioctl must be called once after enqueuing one or
+more buffers to start capturing. Its counterpart
+&VIDIOC-STREAMOFF; stops capturing and dequeues all buffers from both
+queues. Applications can query the signal status, if known, with the
+&VIDIOC-ENUMINPUT; ioctl.</para></entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</informaltable>
+
+	<para>For a more in-depth discussion of memory mapping and
+examples, see <xref linkend="mmap" />.</para>
+      </section>
+    </section>
+
+    <section>
+      <title>Reading Raw VBI Data</title>
+
+      <para>Originally the V4L API did not specify a raw VBI capture
+interface, only the device file <filename>/dev/vbi</filename> was
+reserved for this purpose. The only driver supporting this interface
+was the BTTV driver, de-facto defining the V4L VBI interface. Reading
+from the device yields a raw VBI image with the following
+parameters:<informaltable>
+	    <tgroup cols="2">
+	      <thead>
+		<row>
+		  <entry>&v4l2-vbi-format;</entry>
+		  <entry>V4L, BTTV driver</entry>
+		</row>
+	      </thead>
+	      <tbody valign="top">
+		<row>
+		  <entry>sampling_rate</entry>
+		  <entry>28636363&nbsp;Hz NTSC (or any other 525-line
+standard); 35468950&nbsp;Hz PAL and SECAM (625-line standards)</entry>
+		</row>
+		<row>
+		  <entry>offset</entry>
+		  <entry>?</entry>
+		</row>
+		<row>
+		  <entry>samples_per_line</entry>
+		  <entry>2048</entry>
+		</row>
+		<row>
+		  <entry>sample_format</entry>
+		  <entry>V4L2_PIX_FMT_GREY. The last four bytes (a
+machine endianness integer) contain a frame counter.</entry>
+		</row>
+		<row>
+		  <entry>start[]</entry>
+		  <entry>10, 273 NTSC; 22, 335 PAL and SECAM</entry>
+		</row>
+		<row>
+		  <entry>count[]</entry>
+		  <entry><para>16, 16<footnote><para>Old driver
+versions used different values, eventually the custom
+<constant>BTTV_VBISIZE</constant> ioctl was added to query the
+correct values.</para></footnote></para></entry>
+		</row>
+		<row>
+		  <entry>flags</entry>
+		  <entry>0</entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	</informaltable></para>
+
+      <para>Undocumented in the V4L specification, in Linux 2.3 the
+<constant>VIDIOCGVBIFMT</constant> and
+<constant>VIDIOCSVBIFMT</constant> ioctls using struct
+<structname>vbi_format</structname> were added to determine the VBI
+image parameters. These ioctls are only partially compatible with the
+V4L2 VBI interface specified in <xref linkend="raw-vbi" />.</para>
+
+      <para>An <structfield>offset</structfield> field does not
+exist, <structfield>sample_format</structfield> is supposed to be
+<constant>VIDEO_PALETTE_RAW</constant>, equivalent to
+<constant>V4L2_PIX_FMT_GREY</constant>. The remaining fields are
+probably equivalent to &v4l2-vbi-format;.</para>
+
+      <para>Apparently only the Zoran (ZR 36120) driver implements
+these ioctls. The semantics differ from those specified for V4L2 in two
+ways. The parameters are reset on &func-open; and
+<constant>VIDIOCSVBIFMT</constant> always returns an &EINVAL; if the
+parameters are invalid.</para>
+    </section>
+
+    <section>
+      <title>Miscellaneous</title>
+
+      <para>V4L2 has no equivalent of the
+<constant>VIDIOCGUNIT</constant> ioctl. Applications can find the VBI
+device associated with a video capture device (or vice versa) by
+reopening the device and requesting VBI data. For details see
+<xref linkend="open" />.</para>
+
+      <para>No replacement exists for <constant>VIDIOCKEY</constant>,
+and the V4L functions for microcode programming. A new interface for
+MPEG compression and playback devices is documented in <xref
+	  linkend="extended-controls" />.</para>
+    </section>
+
+  </section>
+
+  <section id="hist-v4l2">
+    <title>Changes of the V4L2 API</title>
+
+    <para>Soon after the V4L API was added to the kernel it was
+criticised as too inflexible. In August 1998 Bill Dirks proposed a
+number of improvements and began to work on documentation, example
+drivers and applications. With the help of other volunteers this
+eventually became the V4L2 API, not just an extension but a
+replacement for the V4L API. However it took another four years and
+two stable kernel releases until the new API was finally accepted for
+inclusion into the kernel in its present form.</para>
+
+    <section>
+      <title>Early Versions</title>
+      <para>1998-08-20: First version.</para>
+
+      <para>1998-08-27: The &func-select; function was introduced.</para>
+
+      <para>1998-09-10: New video standard interface.</para>
+
+      <para>1998-09-18: The <constant>VIDIOC_NONCAP</constant> ioctl
+was replaced by the otherwise meaningless <constant>O_TRUNC</constant>
+&func-open; flag, and the aliases <constant>O_NONCAP</constant> and
+<constant>O_NOIO</constant> were defined. Applications can set this
+flag if they intend to access controls only, as opposed to capture
+applications which need exclusive access. The
+<constant>VIDEO_STD_XXX</constant> identifiers are now ordinals
+instead of flags, and the <function>video_std_construct()</function>
+helper function takes id and transmission arguments.</para>
+
+      <para>1998-09-28: Revamped video standard. Made video controls
+individually enumerable.</para>
+
+      <para>1998-10-02: The <structfield>id</structfield> field was
+removed from struct <structname>video_standard</structname> and the
+color subcarrier fields were renamed. The &VIDIOC-QUERYSTD; ioctl was
+renamed to &VIDIOC-ENUMSTD;, &VIDIOC-G-INPUT; to &VIDIOC-ENUMINPUT;. A
+first draft of the Codec API was released.</para>
+
+      <para>1998-11-08: Many minor changes. Most symbols have been
+renamed. Some material changes to &v4l2-capability;.</para>
+
+      <para>1998-11-12: The read/write directon of some ioctls was misdefined.</para>
+
+      <para>1998-11-14: <constant>V4L2_PIX_FMT_RGB24</constant>
+changed to <constant>V4L2_PIX_FMT_BGR24</constant>, and
+<constant>V4L2_PIX_FMT_RGB32</constant> changed to
+<constant>V4L2_PIX_FMT_BGR32</constant>. Audio controls are now
+accessible with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls under
+names starting with <constant>V4L2_CID_AUDIO</constant>. The
+<constant>V4L2_MAJOR</constant> define was removed from
+<filename>videodev.h</filename> since it was only used once in the
+<filename>videodev</filename> kernel module. The
+<constant>YUV422</constant> and <constant>YUV411</constant> planar
+image formats were added.</para>
+
+      <para>1998-11-28: A few ioctl symbols changed. Interfaces for codecs and
+video output devices were added.</para>
+
+      <para>1999-01-14: A raw VBI capture interface was added.</para>
+
+      <para>1999-01-19: The <constant>VIDIOC_NEXTBUF</constant> ioctl
+      was removed.</para>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.16 1999-01-31</title>
+      <para>1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF
+are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added
+digital zoom (cropping) controls.</para>
+    </section>
+
+    <!-- Where's 0.17? mhs couldn't find that videodev.h, perhaps Bill
+	 forgot to bump the version number or never released it. -->
+
+    <section>
+      <title>V4L2 Version 0.18 1999-03-16</title>
+      <para>Added a v4l to V4L2 ioctl compatibility layer to
+videodev.c. Driver writers, this changes how you implement your ioctl
+handler. See the Driver Writer's Guide. Added some more control id
+codes.</para>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.19 1999-06-05</title>
+      <para>1999-03-18: Fill in the category and catname fields of
+v4l2_queryctrl objects before passing them to the driver. Required a
+minor change to the VIDIOC_QUERYCTRL handlers in the sample
+drivers.</para>
+      <para>1999-03-31: Better compatibility for v4l memory capture
+ioctls. Requires changes to drivers to fully support new compatibility
+features, see Driver Writer's Guide and v4l2cap.c. Added new control
+IDs: V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P,
+and _YUV411P to _YUV411P.</para>
+      <para>1999-04-04: Added a few more control IDs.</para>
+      <para>1999-04-07: Added the button control type.</para>
+      <para>1999-05-02: Fixed a typo in videodev.h, and added the
+V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag.</para>
+      <para>1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing
+a malfunction of this ioctl.</para>
+      <para>1999-06-05: Changed the value of
+V4L2_CID_WHITENESS.</para>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.20 (1999-09-10)</title>
+
+      <para>Version 0.20 introduced a number of changes which were
+<emphasis>not backward compatible</emphasis> with 0.19 and earlier
+versions. Purpose of these changes was to simplify the API, while
+making it more extensible and following common Linux driver API
+conventions.</para>
+
+      <orderedlist>
+	<listitem>
+	  <para>Some typos in <constant>V4L2_FMT_FLAG</constant>
+symbols were fixed. &v4l2-clip; was changed for compatibility with
+v4l. (1999-08-30)</para>
+	</listitem>
+
+	<listitem>
+	  <para><constant>V4L2_TUNER_SUB_LANG1</constant> was added.
+(1999-09-05)</para>
+	</listitem>
+
+	<listitem>
+	  <para>All ioctl() commands that used an integer argument now
+take a pointer to an integer. Where it makes sense, ioctls will return
+the actual new value in the integer pointed to by the argument, a
+common convention in the V4L2 API. The affected ioctls are:
+VIDIOC_PREVIEW, VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ,
+VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example
+<programlisting>
+err = ioctl (fd, VIDIOC_XXX, V4L2_XXX);
+</programlisting> becomes <programlisting>
+int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &amp;a);
+</programlisting>
+	  </para>
+	</listitem>
+
+	<listitem>
+	  <para>All the different get- and set-format commands were
+swept into one &VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctl taking a union
+and a type field selecting the union member as parameter. Purpose is to
+simplify the API by eliminating several ioctls and to allow new and
+driver private data streams without adding new ioctls.</para>
+
+	  <para>This change obsoletes the following ioctls:
+<constant>VIDIOC_S_INFMT</constant>,
+<constant>VIDIOC_G_INFMT</constant>,
+<constant>VIDIOC_S_OUTFMT</constant>,
+<constant>VIDIOC_G_OUTFMT</constant>,
+<constant>VIDIOC_S_VBIFMT</constant> and
+<constant>VIDIOC_G_VBIFMT</constant>. The image format structure
+<structname>v4l2_format</structname> was renamed to &v4l2-pix-format;,
+while &v4l2-format; is now the envelopping structure for all format
+negotiations.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Similar to the changes above, the
+<constant>VIDIOC_G_PARM</constant> and
+<constant>VIDIOC_S_PARM</constant> ioctls were merged with
+<constant>VIDIOC_G_OUTPARM</constant> and
+<constant>VIDIOC_S_OUTPARM</constant>. A
+<structfield>type</structfield> field in the new &v4l2-streamparm;
+selects the respective union member.</para>
+
+	  <para>This change obsoletes the
+<constant>VIDIOC_G_OUTPARM</constant> and
+<constant>VIDIOC_S_OUTPARM</constant> ioctls.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Control enumeration was simplified, and two new
+control flags were introduced and one dropped. The
+<structfield>catname</structfield> field was replaced by a
+<structfield>group</structfield> field.</para>
+
+	  <para>Drivers can now flag unsupported and temporarily
+unavailable controls with <constant>V4L2_CTRL_FLAG_DISABLED</constant>
+and <constant>V4L2_CTRL_FLAG_GRABBED</constant> respectively. The
+<structfield>group</structfield> name indicates a possibly narrower
+classification than the <structfield>category</structfield>. In other
+words, there may be multiple groups within a category. Controls within
+a group would typically be drawn within a group box. Controls in
+different categories might have a greater separation, or may even
+appear in separate windows.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &v4l2-buffer; <structfield>timestamp</structfield>
+was changed to a 64 bit integer, containing the sampling or output
+time of the frame in nanoseconds. Additionally timestamps will be in
+absolute system time, not starting from zero at the beginning of a
+stream. The data type name for timestamps is stamp_t, defined as a
+signed 64-bit integer. Output devices should not send a buffer out
+until the time in the timestamp field has arrived. I would like to
+follow SGI's lead, and adopt a multimedia timestamping system like
+their UST (Unadjusted System Time). See
+http://web.archive.org/web/*/http://reality.sgi.com
+/cpirazzi_engr/lg/time/intro.html.
+UST uses timestamps that are 64-bit signed integers
+(not struct timeval's) and given in nanosecond units. The UST clock
+starts at zero when the system is booted and runs continuously and
+uniformly. It takes a little over 292 years for UST to overflow. There
+is no way to set the UST clock. The regular Linux time-of-day clock
+can be changed periodically, which would cause errors if it were being
+used for timestamping a multimedia stream. A real UST style clock will
+require some support in the kernel that is not there yet. But in
+anticipation, I will change the timestamp field to a 64-bit integer,
+and I will change the v4l2_masterclock_gettime() function (used only
+by drivers) to return a 64-bit integer.</para>
+	</listitem>
+
+	<listitem>
+	  <para>A <structfield>sequence</structfield> field was added
+to &v4l2-buffer;. The <structfield>sequence</structfield> field counts
+captured frames, it is ignored by output devices. When a capture
+driver drops a frame, the sequence number of that frame is
+skipped.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.20 incremental changes</title>
+      <!-- Version number didn't change anymore, reason unknown. -->
+
+      <para>1999-12-23: In &v4l2-vbi-format; the
+<structfield>reserved1</structfield> field became
+<structfield>offset</structfield>. Previously drivers were required to
+clear the <structfield>reserved1</structfield> field.</para>
+
+      <para>2000-01-13: The
+      <constant>V4L2_FMT_FLAG_NOT_INTERLACED</constant> flag was added.</para>
+
+      <para>2000-07-31: The <filename>linux/poll.h</filename> header
+is now included by <filename>videodev.h</filename> for compatibility
+with the original <filename>videodev.h</filename> file.</para>
+
+      <para>2000-11-20: <constant>V4L2_TYPE_VBI_OUTPUT</constant> and
+<constant>V4L2_PIX_FMT_Y41P</constant> were added.</para>
+
+      <para>2000-11-25: <constant>V4L2_TYPE_VBI_INPUT</constant> was
+added.</para>
+
+      <para>2000-12-04: A couple typos in symbol names were fixed.</para>
+
+      <para>2001-01-18: To avoid namespace conflicts the
+<constant>fourcc</constant> macro defined in the
+<filename>videodev.h</filename> header file was renamed to
+<constant>v4l2_fourcc</constant>.</para>
+
+      <para>2001-01-25: A possible driver-level compatibility problem
+between the <filename>videodev.h</filename> file in Linux 2.4.0 and
+the <filename>videodev.h</filename> file included in the
+<filename>videodevX</filename> patch was fixed. Users of an earlier
+version of <filename>videodevX</filename> on Linux 2.4.0 should
+recompile their V4L and V4L2 drivers.</para>
+
+      <para>2001-01-26: A possible kernel-level incompatibility
+between the <filename>videodev.h</filename> file in the
+<filename>videodevX</filename> patch and the
+<filename>videodev.h</filename> file in Linux 2.2.x with devfs patches
+applied was fixed.</para>
+
+      <para>2001-03-02: Certain V4L ioctls which pass data in both
+direction although they are defined with read-only parameter, did not
+work correctly through the backward compatibility layer.
+[Solution?]</para>
+
+      <para>2001-04-13: Big endian 16-bit RGB formats were added.</para>
+
+      <para>2001-09-17: New YUV formats and the &VIDIOC-G-FREQUENCY; and
+&VIDIOC-S-FREQUENCY; ioctls were added. (The old
+<constant>VIDIOC_G_FREQ</constant> and
+<constant>VIDIOC_S_FREQ</constant> ioctls did not take multiple tuners
+into account.)</para>
+
+      <para>2000-09-18: <constant>V4L2_BUF_TYPE_VBI</constant> was
+added. This may <emphasis>break compatibility</emphasis> as the
+&VIDIOC-G-FMT; and &VIDIOC-S-FMT; ioctls may fail now if the struct
+<structname>v4l2_fmt</structname> <structfield>type</structfield>
+field does not contain <constant>V4L2_BUF_TYPE_VBI</constant>. In the
+documentation of the &v4l2-vbi-format;
+<structfield>offset</structfield> field the ambiguous phrase "rising
+edge" was changed to "leading edge".</para>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.20 2000-11-23</title>
+
+      <para>A number of changes were made to the raw VBI
+interface.</para>
+
+      <orderedlist>
+	<listitem>
+	  <para>Figures clarifying the line numbering scheme were
+added to the V4L2 API specification. The
+<structfield>start</structfield>[0] and
+<structfield>start</structfield>[1] fields no longer count line
+numbers beginning at zero. Rationale: a) The previous definition was
+unclear. b) The <structfield>start</structfield>[] values are ordinal
+numbers. c) There is no point in inventing a new line numbering
+scheme. We now use line number as defined by ITU-R, period.
+Compatibility: Add one to the start values. Applications depending on
+the previous semantics may not function correctly.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The restriction "count[0] &gt; 0 and count[1] &gt; 0"
+has been relaxed  to "(count[0] + count[1]) &gt; 0". Rationale:
+Drivers may allocate resources at scan line granularity and some data
+services are transmitted only on the first field. The comment that
+both <structfield>count</structfield> values will usually be equal is
+misleading and pointless and has been removed. This change
+<emphasis>breaks compatibility</emphasis> with earlier versions:
+Drivers may return EINVAL, applications may not function
+correctly.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Drivers are again permitted to return negative
+(unknown) start values as proposed earlier. Why this feature was
+dropped is unclear. This change may <emphasis>break
+compatibility</emphasis> with applications depending on the start
+values being positive. The use of <constant>EBUSY</constant> and
+<constant>EINVAL</constant> error codes with the &VIDIOC-S-FMT; ioctl
+was clarified. The &EBUSY; was finally documented, and the
+<structfield>reserved2</structfield> field which was previously
+mentioned only in the <filename>videodev.h</filename> header
+file.</para>
+	</listitem>
+
+	<listitem>
+	  <para>New buffer types
+<constant>V4L2_TYPE_VBI_INPUT</constant> and
+<constant>V4L2_TYPE_VBI_OUTPUT</constant> were added. The former is an
+alias for the old <constant>V4L2_TYPE_VBI</constant>, the latter was
+missing in the <filename>videodev.h</filename> file.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 Version 0.20 2002-07-25</title>
+      <para>Added sliced VBI interface proposal.</para>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.5.46, 2002-10</title>
+
+      <para>Around October-November 2002, prior to an announced
+feature freeze of Linux 2.5, the API was revised, drawing from
+experience with V4L2 0.20. This unnamed version was finally merged
+into Linux 2.5.46.</para>
+
+      <orderedlist>
+	<listitem>
+	  <para>As specified in <xref linkend="related" />, drivers
+must make related device functions available under all minor device
+numbers.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &func-open; function requires access mode
+<constant>O_RDWR</constant> regardless of the device type. All V4L2
+drivers exchanging data with applications must support the
+<constant>O_NONBLOCK</constant> flag. The <constant>O_NOIO</constant>
+flag, a V4L2 symbol which aliased the meaningless
+<constant>O_TRUNC</constant> to indicate accesses without data
+exchange (panel applications) was dropped. Drivers must stay in "panel
+mode" until the application attempts to initiate a data exchange, see
+<xref linkend="open" />.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &v4l2-capability; changed dramatically. Note that
+also the size of the structure changed, which is encoded in the ioctl
+request code, thus older V4L2 devices will respond with an &EINVAL; to
+the new &VIDIOC-QUERYCAP; ioctl.</para>
+
+	  <para>There are new fields to identify the driver, a new RDS
+device function <constant>V4L2_CAP_RDS_CAPTURE</constant>, the
+<constant>V4L2_CAP_AUDIO</constant> flag indicates if the device has
+any audio connectors, another I/O capability
+<constant>V4L2_CAP_ASYNCIO</constant> can be flagged. In response to
+these changes the <structfield>type</structfield> field became a bit
+set and was merged into the <structfield>flags</structfield> field.
+<constant>V4L2_FLAG_TUNER</constant> was renamed to
+<constant>V4L2_CAP_TUNER</constant>,
+<constant>V4L2_CAP_VIDEO_OVERLAY</constant> replaced
+<constant>V4L2_FLAG_PREVIEW</constant> and
+<constant>V4L2_CAP_VBI_CAPTURE</constant> and
+<constant>V4L2_CAP_VBI_OUTPUT</constant> replaced
+<constant>V4L2_FLAG_DATA_SERVICE</constant>.
+<constant>V4L2_FLAG_READ</constant> and
+<constant>V4L2_FLAG_WRITE</constant> were merged into
+<constant>V4L2_CAP_READWRITE</constant>.</para>
+
+	  <para>The redundant fields
+<structfield>inputs</structfield>, <structfield>outputs</structfield>
+and <structfield>audios</structfield> were removed. These properties
+can be determined as described in <xref linkend="video" /> and <xref
+linkend="audio" />.</para>
+
+	  <para>The somewhat volatile and therefore barely useful
+fields <structfield>maxwidth</structfield>,
+<structfield>maxheight</structfield>,
+<structfield>minwidth</structfield>,
+<structfield>minheight</structfield>,
+<structfield>maxframerate</structfield> were removed. This information
+is available as described in <xref linkend="format" /> and
+<xref linkend="standard" />.</para>
+
+	  <para><constant>V4L2_FLAG_SELECT</constant> was removed. We
+believe the select() function is important enough to require support
+of it in all V4L2 drivers exchanging data with applications. The
+redundant <constant>V4L2_FLAG_MONOCHROME</constant> flag was removed,
+this information is available as described in <xref
+	      linkend="format" />.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-input; the
+<structfield>assoc_audio</structfield> field and the
+<structfield>capability</structfield> field and its only flag
+<constant>V4L2_INPUT_CAP_AUDIO</constant> was replaced by the new
+<structfield>audioset</structfield> field. Instead of linking one
+video input to one audio input this field reports all audio inputs
+this video input combines with.</para>
+
+	  <para>New fields are <structfield>tuner</structfield>
+(reversing the former link from tuners to video inputs),
+<structfield>std</structfield> and
+<structfield>status</structfield>.</para>
+
+	  <para>Accordingly &v4l2-output; lost its
+<structfield>capability</structfield> and
+<structfield>assoc_audio</structfield> fields.
+<structfield>audioset</structfield>,
+<structfield>modulator</structfield> and
+<structfield>std</structfield> where added instead.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &v4l2-audio; field
+<structfield>audio</structfield> was renamed to
+<structfield>index</structfield>, for consistency with other
+structures. A new capability flag
+<constant>V4L2_AUDCAP_STEREO</constant> was added to indicated if the
+audio input in question supports stereo sound.
+<constant>V4L2_AUDCAP_EFFECTS</constant> and the corresponding
+<constant>V4L2_AUDMODE</constant> flags where removed. This can be
+easily implemented using controls. (However the same applies to AVL
+which is still there.)</para>
+
+	  <para>Again for consistency the &v4l2-audioout; field
+<structfield>audio</structfield> was renamed to
+<structfield>index</structfield>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &v4l2-tuner;
+<structfield>input</structfield> field was replaced by an
+<structfield>index</structfield> field, permitting devices with
+multiple tuners. The link between video inputs and tuners is now
+reversed, inputs point to their tuner. The
+<structfield>std</structfield> substructure became a
+simple set (more about this below) and moved into &v4l2-input;. A
+<structfield>type</structfield> field was added.</para>
+
+	  <para>Accordingly in &v4l2-modulator; the
+<structfield>output</structfield> was replaced by an
+<structfield>index</structfield> field.</para>
+
+	  <para>In &v4l2-frequency; the
+<structfield>port</structfield> field was replaced by a
+<structfield>tuner</structfield> field containing the respective tuner
+or modulator index number. A tuner <structfield>type</structfield>
+field was added and the <structfield>reserved</structfield> field
+became larger for future extensions (satellite tuners in
+particular).</para>
+	</listitem>
+
+	<listitem>
+	  <para>The idea of completely transparent video standards was
+dropped. Experience showed that applications must be able to work with
+video standards beyond presenting the user a menu. Instead of
+enumerating supported standards with an ioctl applications can now
+refer to standards by &v4l2-std-id; and symbols defined in the
+<filename>videodev2.h</filename> header file. For details see <xref
+	      linkend="standard" />. The &VIDIOC-G-STD; and
+&VIDIOC-S-STD; now take a pointer to this type as argument.
+&VIDIOC-QUERYSTD; was added to autodetect the received standard, if
+the hardware has this capability. In &v4l2-standard; an
+<structfield>index</structfield> field was added for &VIDIOC-ENUMSTD;.
+A &v4l2-std-id; field named <structfield>id</structfield> was added as
+machine readable identifier, also replacing the
+<structfield>transmission</structfield> field. The misleading
+<structfield>framerate</structfield> field was renamed
+to <structfield>frameperiod</structfield>. The now obsolete
+<structfield>colorstandard</structfield> information, originally
+needed to distguish between variations of standards, were
+removed.</para>
+
+	  <para>Struct <structname>v4l2_enumstd</structname> ceased to
+be. &VIDIOC-ENUMSTD; now takes a pointer to a &v4l2-standard;
+directly. The information which standards are supported by a
+particular video input or output moved into &v4l2-input; and
+&v4l2-output; fields named <structfield>std</structfield>,
+respectively.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &v4l2-queryctrl; fields
+<structfield>category</structfield> and
+<structfield>group</structfield> did not catch on and/or were not
+implemented as expected and therefore removed.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &VIDIOC-TRY-FMT; ioctl was added to negotiate data
+formats as with &VIDIOC-S-FMT;, but without the overhead of
+programming the hardware and regardless of I/O in progress.</para>
+
+	  <para>In &v4l2-format; the <structfield>fmt</structfield>
+union was extended to contain &v4l2-window;. All image format
+negotiations are now possible with <constant>VIDIOC_G_FMT</constant>,
+<constant>VIDIOC_S_FMT</constant> and
+<constant>VIDIOC_TRY_FMT</constant>; ioctl. The
+<constant>VIDIOC_G_WIN</constant> and
+<constant>VIDIOC_S_WIN</constant> ioctls to prepare for a video
+overlay were removed. The <structfield>type</structfield> field
+changed to type &v4l2-buf-type; and the buffer type names changed as
+follows.<informaltable>
+	      <tgroup cols="2">
+		<thead>
+		  <row>
+		    <entry>Old defines</entry>
+		    <entry>&v4l2-buf-type;</entry>
+		  </row>
+		</thead>
+		<tbody valign="top">
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_CAPTURE</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_VIDEO_CAPTURE</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_CODECIN</constant></entry>
+		    <entry>Omitted for now</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_CODECOUT</constant></entry>
+		    <entry>Omitted for now</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_EFFECTSIN</constant></entry>
+		    <entry>Omitted for now</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_EFFECTSIN2</constant></entry>
+		    <entry>Omitted for now</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_EFFECTSOUT</constant></entry>
+		    <entry>Omitted for now</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_VIDEOOUT</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_VBI_CAPTURE</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_SLICED_VBI_CAPTURE</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_SLICED_VBI_OUTPUT</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_BUF_TYPE_PRIVATE_BASE</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_PRIVATE</constant> (but this is deprecated)</entry>
+		  </row>
+		</tbody>
+	      </tgroup>
+	    </informaltable></para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-fmtdesc; a &v4l2-buf-type; field named
+<structfield>type</structfield> was added as in &v4l2-format;. The
+<constant>VIDIOC_ENUM_FBUFFMT</constant> ioctl is no longer needed and
+was removed. These calls can be replaced by &VIDIOC-ENUM-FMT; with
+type <constant>V4L2_BUF_TYPE_VIDEO_OVERLAY</constant>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-pix-format; the
+<structfield>depth</structfield> field was removed, assuming
+applications which recognize the format by its four-character-code
+already know the color depth, and others do not care about it. The
+same rationale lead to the removal of the
+<constant>V4L2_FMT_FLAG_COMPRESSED</constant> flag. The
+<constant>V4L2_FMT_FLAG_SWCONVECOMPRESSED</constant> flag was removed
+because drivers are not supposed to convert images in kernel space. A
+user library of conversion functions should be provided instead. The
+<constant>V4L2_FMT_FLAG_BYTESPERLINE</constant> flag was redundant.
+Applications can set the <structfield>bytesperline</structfield> field
+to zero to get a reasonable default. Since the remaining flags were
+replaced as well, the <structfield>flags</structfield> field itself
+was removed.</para>
+	  <para>The interlace flags were replaced by a &v4l2-field;
+value in a newly added <structfield>field</structfield>
+field.<informaltable>
+	      <tgroup cols="2">
+		<thead>
+		  <row>
+		    <entry>Old flag</entry>
+		    <entry>&v4l2-field;</entry>
+		  </row>
+		</thead>
+		<tbody valign="top">
+		  <row>
+		    <entry><constant>V4L2_FMT_FLAG_NOT_INTERLACED</constant></entry>
+		    <entry>?</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_FMT_FLAG_INTERLACED</constant>
+= <constant>V4L2_FMT_FLAG_COMBINED</constant></entry>
+		    <entry><constant>V4L2_FIELD_INTERLACED</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_FMT_FLAG_TOPFIELD</constant>
+= <constant>V4L2_FMT_FLAG_ODDFIELD</constant></entry>
+		    <entry><constant>V4L2_FIELD_TOP</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_FMT_FLAG_BOTFIELD</constant>
+= <constant>V4L2_FMT_FLAG_EVENFIELD</constant></entry>
+		    <entry><constant>V4L2_FIELD_BOTTOM</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_FIELD_SEQ_TB</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_FIELD_SEQ_BT</constant></entry>
+		  </row>
+		  <row>
+		    <entry><constant>-</constant></entry>
+		    <entry><constant>V4L2_FIELD_ALTERNATE</constant></entry>
+		  </row>
+		</tbody>
+	      </tgroup>
+	    </informaltable></para>
+
+	  <para>The color space flags were replaced by a
+&v4l2-colorspace; value in a newly added
+<structfield>colorspace</structfield> field, where one of
+<constant>V4L2_COLORSPACE_SMPTE170M</constant>,
+<constant>V4L2_COLORSPACE_BT878</constant>,
+<constant>V4L2_COLORSPACE_470_SYSTEM_M</constant> or
+<constant>V4L2_COLORSPACE_470_SYSTEM_BG</constant> replaces
+<constant>V4L2_FMT_CS_601YUV</constant>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-requestbuffers; the
+<structfield>type</structfield> field was properly defined as
+&v4l2-buf-type;. Buffer types changed as mentioned above. A new
+<structfield>memory</structfield> field of type &v4l2-memory; was
+added to distinguish between I/O methods using buffers allocated
+by the driver or the application. See <xref linkend="io" /> for
+details.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-buffer; the <structfield>type</structfield>
+field was properly defined as &v4l2-buf-type;. Buffer types changed as
+mentioned above. A <structfield>field</structfield> field of type
+&v4l2-field; was added to indicate if a buffer contains a top or
+bottom field. The old field flags were removed. Since no unadjusted
+system time clock was added to the kernel as planned, the
+<structfield>timestamp</structfield> field changed back from type
+stamp_t, an unsigned 64 bit integer expressing the sample time in
+nanoseconds, to struct <structname>timeval</structname>. With the
+addition of a second memory mapping method the
+<structfield>offset</structfield> field moved into union
+<structfield>m</structfield>, and a new
+<structfield>memory</structfield> field of type &v4l2-memory; was
+added to distinguish between I/O methods. See <xref linkend="io" />
+for details.</para>
+
+	  <para>The <constant>V4L2_BUF_REQ_CONTIG</constant>
+flag was used by the V4L compatibility layer, after changes to this
+code it was no longer needed. The
+<constant>V4L2_BUF_ATTR_DEVICEMEM</constant> flag would indicate if
+the buffer was indeed allocated in device memory rather than DMA-able
+system memory. It was barely useful and so was removed.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-framebuffer; the
+<structfield>base[3]</structfield> array anticipating double- and
+triple-buffering in off-screen video memory, however without defining
+a synchronization mechanism, was replaced by a single pointer. The
+<constant>V4L2_FBUF_CAP_SCALEUP</constant> and
+<constant>V4L2_FBUF_CAP_SCALEDOWN</constant> flags were removed.
+Applications can determine this capability more accurately using the
+new cropping and scaling interface. The
+<constant>V4L2_FBUF_CAP_CLIPPING</constant> flag was replaced by
+<constant>V4L2_FBUF_CAP_LIST_CLIPPING</constant> and
+<constant>V4L2_FBUF_CAP_BITMAP_CLIPPING</constant>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-clip; the <structfield>x</structfield>,
+<structfield>y</structfield>, <structfield>width</structfield> and
+<structfield>height</structfield> field moved into a
+<structfield>c</structfield> substructure of type &v4l2-rect;. The
+<structfield>x</structfield> and <structfield>y</structfield> fields
+were renamed to <structfield>left</structfield> and
+<structfield>top</structfield>, &ie; offsets to a context dependent
+origin.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-window; the <structfield>x</structfield>,
+<structfield>y</structfield>, <structfield>width</structfield> and
+<structfield>height</structfield> field moved into a
+<structfield>w</structfield> substructure as above. A
+<structfield>field</structfield> field of type %v4l2-field; was added
+to distinguish between field and frame (interlaced) overlay.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The digital zoom interface, including struct
+<structname>v4l2_zoomcap</structname>, struct
+<structname>v4l2_zoom</structname>,
+<constant>V4L2_ZOOM_NONCAP</constant> and
+<constant>V4L2_ZOOM_WHILESTREAMING</constant> was replaced by a new
+cropping and scaling interface. The previously unused struct
+<structname>v4l2_cropcap</structname> and
+<structname>v4l2_crop</structname> where redefined for this purpose.
+See <xref linkend="crop" /> for details.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-vbi-format; the
+<structfield>SAMPLE_FORMAT</structfield> field now contains a
+four-character-code as used to identify video image formats and
+<constant>V4L2_PIX_FMT_GREY</constant> replaces the
+<constant>V4L2_VBI_SF_UBYTE</constant> define. The
+<structfield>reserved</structfield> field was extended.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In &v4l2-captureparm; the type of the
+<structfield>timeperframe</structfield> field changed from unsigned
+long to &v4l2-fract;. This allows the accurate expression of multiples
+of the NTSC-M frame rate 30000 / 1001. A new field
+<structfield>readbuffers</structfield> was added to control the driver
+behaviour in read I/O mode.</para>
+
+	  <para>Similar changes were made to &v4l2-outputparm;.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The struct <structname>v4l2_performance</structname>
+and <constant>VIDIOC_G_PERF</constant> ioctl were dropped. Except when
+using the <link linkend="rw">read/write I/O method</link>, which is
+limited anyway, this information is already available to
+applications.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The example transformation from RGB to YCbCr color
+space in the old V4L2 documentation was inaccurate, this has been
+corrected in <xref linkend="pixfmt" />.<!-- 0.5670G should be
+0.587, and 127/112 != 255/224 --></para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 2003-06-19</title>
+
+      <orderedlist>
+	<listitem>
+	  <para>A new capability flag
+<constant>V4L2_CAP_RADIO</constant> was added for radio devices. Prior
+to this change radio devices would identify solely by having exactly one
+tuner whose type field reads <constant>V4L2_TUNER_RADIO</constant>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>An optional driver access priority mechanism was
+added, see <xref linkend="app-pri" /> for details.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The audio input and output interface was found to be
+incomplete.</para>
+	  <para>Previously the &VIDIOC-G-AUDIO;
+ioctl would enumerate the available audio inputs. An ioctl to
+determine the current audio input, if more than one combines with the
+current video input, did not exist. So
+<constant>VIDIOC_G_AUDIO</constant> was renamed to
+<constant>VIDIOC_G_AUDIO_OLD</constant>, this ioctl was removed on
+Kernel 2.6.39. The &VIDIOC-ENUMAUDIO; ioctl was added to enumerate
+audio inputs, while &VIDIOC-G-AUDIO; now reports the current audio
+input.</para>
+	  <para>The same changes were made to &VIDIOC-G-AUDOUT; and
+&VIDIOC-ENUMAUDOUT;.</para>
+	  <para>Until further the "videodev" module will automatically
+translate between the old and new ioctls, but drivers and applications
+must be updated to successfully compile again.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &VIDIOC-OVERLAY; ioctl was incorrectly defined with
+write-read parameter. It was changed to write-only, while the write-read
+version was renamed to <constant>VIDIOC_OVERLAY_OLD</constant>. The old
+ioctl was removed on Kernel 2.6.39. Until further the "videodev"
+kernel module will automatically translate to the new version, so drivers
+must be recompiled, but not applications.</para>
+	</listitem>
+
+	<listitem>
+	  <para><xref linkend="overlay" /> incorrectly stated that
+clipping rectangles define regions where the video can be seen.
+Correct is that clipping rectangles define regions where
+<emphasis>no</emphasis> video shall be displayed and so the graphics
+surface can be seen.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The &VIDIOC-S-PARM; and &VIDIOC-S-CTRL; ioctls were
+defined with write-only parameter, inconsistent with other ioctls
+modifying their argument. They were changed to write-read, while a
+<constant>_OLD</constant> suffix was added to the write-only versions.
+The old ioctls were removed on Kernel 2.6.39. Drivers and
+applications assuming a constant parameter need an update.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 2003-11-05</title>
+      <orderedlist>
+	<listitem>
+	  <para>In <xref linkend="pixfmt-rgb" /> the following pixel
+formats were incorrectly transferred from Bill Dirks' V4L2
+specification. Descriptions below refer to bytes in memory, in
+ascending address order.<informaltable>
+	      <tgroup cols="3">
+		<thead>
+		  <row>
+		    <entry>Symbol</entry>
+		    <entry>In this document prior to revision
+0.5</entry>
+		    <entry>Corrected</entry>
+		  </row>
+		</thead>
+		<tbody valign="top">
+		  <row>
+		    <entry><constant>V4L2_PIX_FMT_RGB24</constant></entry>
+		    <entry>B, G, R</entry>
+		    <entry>R, G, B</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
+		    <entry>R, G, B</entry>
+		    <entry>B, G, R</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_PIX_FMT_RGB32</constant></entry>
+		    <entry>B, G, R, X</entry>
+		    <entry>R, G, B, X</entry>
+		  </row>
+		  <row>
+		    <entry><constant>V4L2_PIX_FMT_BGR32</constant></entry>
+		    <entry>R, G, B, X</entry>
+		    <entry>B, G, R, X</entry>
+		  </row>
+		</tbody>
+	      </tgroup>
+	    </informaltable> The
+<constant>V4L2_PIX_FMT_BGR24</constant> example was always
+correct.</para>
+	  <para>In <xref linkend="v4l-image-properties" /> the mapping
+of the V4L <constant>VIDEO_PALETTE_RGB24</constant> and
+<constant>VIDEO_PALETTE_RGB32</constant> formats to V4L2 pixel formats
+was accordingly corrected.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Unrelated to the fixes above, drivers may still
+interpret some V4L2 RGB pixel formats differently. These issues have
+yet to be addressed, for details see <xref
+	      linkend="pixfmt-rgb" />.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.6, 2004-05-09</title>
+      <orderedlist>
+	<listitem>
+	  <para>The &VIDIOC-CROPCAP; ioctl was incorrectly defined
+with read-only parameter. It is now defined as write-read ioctl, while
+the read-only version was renamed to
+<constant>VIDIOC_CROPCAP_OLD</constant>. The old ioctl was removed
+on Kernel 2.6.39.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.8</title>
+      <orderedlist>
+	<listitem>
+	  <para>A new field <structfield>input</structfield> (former
+<structfield>reserved[0]</structfield>) was added to the &v4l2-buffer;
+structure. Purpose of this field is to alternate between video inputs
+(&eg; cameras) in step with the video capturing process. This function
+must be enabled with the new <constant>V4L2_BUF_FLAG_INPUT</constant>
+flag. The <structfield>flags</structfield> field is no longer
+read-only.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2004-08-01</title>
+
+      <orderedlist>
+	<listitem>
+	  <para>The return value of the
+<xref linkend="func-open" /> function was incorrectly documented.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Audio output ioctls end in -AUDOUT, not -AUDIOOUT.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In the Current Audio Input example the
+<constant>VIDIOC_G_AUDIO</constant> ioctl took the wrong
+argument.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The documentation of the &VIDIOC-QBUF; and
+&VIDIOC-DQBUF; ioctls did not mention the &v4l2-buffer;
+<structfield>memory</structfield> field. It was also missing from
+examples. Also on the <constant>VIDIOC_DQBUF</constant> page the &EIO;
+was not documented.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.14</title>
+      <orderedlist>
+	<listitem>
+	  <para>A new sliced VBI interface was added. It is documented
+in <xref linkend="sliced" /> and replaces the interface first
+proposed in V4L2 specification 0.8.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.15</title>
+      <orderedlist>
+	<listitem>
+	  <para>The &VIDIOC-LOG-STATUS; ioctl was added.</para>
+	</listitem>
+
+	<listitem>
+	  <para>New video standards
+<constant>V4L2_STD_NTSC_443</constant>,
+<constant>V4L2_STD_SECAM_LC</constant>,
+<constant>V4L2_STD_SECAM_DK</constant> (a set of SECAM D, K and K1),
+and <constant>V4L2_STD_ATSC</constant> (a set of
+<constant>V4L2_STD_ATSC_8_VSB</constant> and
+<constant>V4L2_STD_ATSC_16_VSB</constant>) were defined. Note the
+<constant>V4L2_STD_525_60</constant> set now includes
+<constant>V4L2_STD_NTSC_443</constant>. See also <xref
+	      linkend="v4l2-std-id" />.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The <constant>VIDIOC_G_COMP</constant> and
+<constant>VIDIOC_S_COMP</constant> ioctl were renamed to
+<constant>VIDIOC_G_MPEGCOMP</constant> and
+<constant>VIDIOC_S_MPEGCOMP</constant> respectively. Their argument
+was replaced by a struct
+<structname>v4l2_mpeg_compression</structname> pointer. (The
+<constant>VIDIOC_G_MPEGCOMP</constant> and
+<constant>VIDIOC_S_MPEGCOMP</constant> ioctls where removed in Linux
+2.6.25.)</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2005-11-27</title>
+      <para>The capture example in <xref linkend="capture-example" />
+called the &VIDIOC-S-CROP; ioctl without checking if cropping is
+supported. In the video standard selection example in
+<xref linkend="standard" /> the &VIDIOC-S-STD; call used the wrong
+argument type.</para>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2006-01-10</title>
+      <orderedlist>
+	<listitem>
+	  <para>The <constant>V4L2_IN_ST_COLOR_KILL</constant> flag in
+&v4l2-input; not only indicates if the color killer is enabled, but
+also if it is active. (The color killer disables color decoding when
+it detects no color in the video signal to improve the image
+quality.)</para>
+	</listitem>
+
+	<listitem>
+	  <para>&VIDIOC-S-PARM; is a write-read ioctl, not write-only as
+stated on its reference page. The ioctl changed in 2003 as noted above.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2006-02-03</title>
+      <orderedlist>
+	<listitem>
+	  <para>In &v4l2-captureparm; and &v4l2-outputparm; the
+<structfield>timeperframe</structfield> field gives the time in
+seconds, not microseconds.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2006-02-04</title>
+      <orderedlist>
+	<listitem>
+	  <para>The <structfield>clips</structfield> field in
+&v4l2-window; must point to an array of &v4l2-clip;, not a linked
+list, because drivers ignore the struct
+<structname>v4l2_clip</structname>.<structfield>next</structfield>
+pointer.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.17</title>
+      <orderedlist>
+	<listitem>
+	  <para>New video standard macros were added:
+<constant>V4L2_STD_NTSC_M_KR</constant> (NTSC M South Korea), and the
+sets <constant>V4L2_STD_MN</constant>,
+<constant>V4L2_STD_B</constant>, <constant>V4L2_STD_GH</constant> and
+<constant>V4L2_STD_DK</constant>. The
+<constant>V4L2_STD_NTSC</constant> and
+<constant>V4L2_STD_SECAM</constant> sets now include
+<constant>V4L2_STD_NTSC_M_KR</constant> and
+<constant>V4L2_STD_SECAM_LC</constant> respectively.</para>
+	</listitem>
+
+	<listitem>
+	  <para>A new <constant>V4L2_TUNER_MODE_LANG1_LANG2</constant>
+was defined to record both languages of a bilingual program. The
+use of <constant>V4L2_TUNER_MODE_STEREO</constant> for this purpose
+is deprecated now. See the &VIDIOC-G-TUNER; section for
+details.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2006-09-23 (Draft 0.15)</title>
+      <orderedlist>
+	<listitem>
+	  <para>In various places
+<constant>V4L2_BUF_TYPE_SLICED_VBI_CAPTURE</constant> and
+<constant>V4L2_BUF_TYPE_SLICED_VBI_OUTPUT</constant> of the sliced VBI
+interface were not mentioned along with other buffer types.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In <xref linkend="vidioc-g-audio" /> it was clarified
+that the &v4l2-audio; <structfield>mode</structfield> field is a flags
+field.</para>
+	</listitem>
+
+	<listitem>
+	  <para><xref linkend="vidioc-querycap" /> did not mention the
+sliced VBI and radio capability flags.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In <xref linkend="vidioc-g-frequency" /> it was
+clarified that applications must initialize the tuner
+<structfield>type</structfield> field of &v4l2-frequency; before
+calling &VIDIOC-S-FREQUENCY;.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The <structfield>reserved</structfield> array
+in &v4l2-requestbuffers; has 2 elements, not 32.</para>
+	</listitem>
+
+	<listitem>
+	  <para>In <xref linkend="output" /> and <xref
+	      linkend="raw-vbi" /> the device file names
+<filename>/dev/vout</filename> which never caught on were replaced
+by <filename>/dev/video</filename>.</para>
+	</listitem>
+
+	<listitem>
+	  <para>With Linux 2.6.15 the possible range for VBI device minor
+numbers was extended from 224-239 to 224-255. Accordingly device file names
+<filename>/dev/vbi0</filename> to <filename>/dev/vbi31</filename> are
+possible now.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.18</title>
+      <orderedlist>
+	<listitem>
+	  <para>New ioctls &VIDIOC-G-EXT-CTRLS;, &VIDIOC-S-EXT-CTRLS;
+and &VIDIOC-TRY-EXT-CTRLS; were added, a flag to skip unsupported
+controls with &VIDIOC-QUERYCTRL;, new control types
+<constant>V4L2_CTRL_TYPE_INTEGER64</constant> and
+<constant>V4L2_CTRL_TYPE_CTRL_CLASS</constant> (<xref
+	      linkend="v4l2-ctrl-type" />), and new control flags
+<constant>V4L2_CTRL_FLAG_READ_ONLY</constant>,
+<constant>V4L2_CTRL_FLAG_UPDATE</constant>,
+<constant>V4L2_CTRL_FLAG_INACTIVE</constant> and
+<constant>V4L2_CTRL_FLAG_SLIDER</constant> (<xref
+	      linkend="control-flags" />). See <xref
+	      linkend="extended-controls" /> for details.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.19</title>
+      <orderedlist>
+	<listitem>
+	  <para>In &v4l2-sliced-vbi-cap; a buffer type field was added
+replacing a reserved field. Note on architectures where the size of
+enum types differs from int types the size of the structure changed.
+The &VIDIOC-G-SLICED-VBI-CAP; ioctl was redefined from being read-only
+to write-read. Applications must initialize the type field and clear
+the reserved fields now. These changes may <emphasis>break the
+compatibility</emphasis> with older drivers and applications.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The ioctls &VIDIOC-ENUM-FRAMESIZES; and
+&VIDIOC-ENUM-FRAMEINTERVALS; were added.</para>
+	</listitem>
+
+	<listitem>
+	  <para>A new pixel format <constant>V4L2_PIX_FMT_RGB444</constant> (<xref
+linkend="rgb-formats" />) was added.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 spec erratum 2006-10-12 (Draft 0.17)</title>
+      <orderedlist>
+	<listitem>
+	  <para><constant>V4L2_PIX_FMT_HM12</constant> (<xref
+linkend="reserved-formats" />) is a YUV 4:2:0, not 4:2:2 format.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.21</title>
+      <orderedlist>
+	<listitem>
+	  <para>The <filename>videodev2.h</filename> header file is
+now dual licensed under GNU General Public License version two or
+later, and under a 3-clause BSD-style license.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.22</title>
+      <orderedlist>
+	<listitem>
+	  <para>Two new field orders
+	  <constant>V4L2_FIELD_INTERLACED_TB</constant> and
+	  <constant>V4L2_FIELD_INTERLACED_BT</constant> were
+	  added. See <xref linkend="v4l2-field" /> for details.</para>
+	</listitem>
+
+	<listitem>
+	  <para>Three new clipping/blending methods with a global or
+straight or inverted local alpha value were added to the video overlay
+interface. See the description of the &VIDIOC-G-FBUF; and
+&VIDIOC-S-FBUF; ioctls for details.</para>
+	  <para>A new <structfield>global_alpha</structfield> field
+was added to <link
+linkend="v4l2-window"><structname>v4l2_window</structname></link>,
+extending the structure. This may <emphasis>break
+compatibility</emphasis> with applications using a struct
+<structname>v4l2_window</structname> directly. However the <link
+linkend="vidioc-g-fmt">VIDIOC_G/S/TRY_FMT</link> ioctls, which take a
+pointer to a <link linkend="v4l2-format">v4l2_format</link> parent
+structure with padding bytes at the end, are not affected.</para>
+	</listitem>
+
+	<listitem>
+	  <para>The format of the <structfield>chromakey</structfield>
+field in &v4l2-window; changed from "host order RGB32" to a pixel
+value in the same format as the framebuffer. This may <emphasis>break
+compatibility</emphasis> with existing applications. Drivers
+supporting the "host order RGB32" format are not known.</para>
+	</listitem>
+
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.24</title>
+      <orderedlist>
+	<listitem>
+	  <para>The pixel formats
+<constant>V4L2_PIX_FMT_PAL8</constant>,
+<constant>V4L2_PIX_FMT_YUV444</constant>,
+<constant>V4L2_PIX_FMT_YUV555</constant>,
+<constant>V4L2_PIX_FMT_YUV565</constant> and
+<constant>V4L2_PIX_FMT_YUV32</constant> were added.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.25</title>
+      <orderedlist>
+	<listitem>
+	  <para>The pixel formats <link linkend="V4L2-PIX-FMT-Y16">
+<constant>V4L2_PIX_FMT_Y16</constant></link> and <link
+linkend="V4L2-PIX-FMT-SBGGR16">
+<constant>V4L2_PIX_FMT_SBGGR16</constant></link> were added.</para>
+	</listitem>
+	<listitem>
+	  <para>New <link linkend="control">controls</link>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY</constant>,
+<constant>V4L2_CID_HUE_AUTO</constant>,
+<constant>V4L2_CID_WHITE_BALANCE_TEMPERATURE</constant>,
+<constant>V4L2_CID_SHARPNESS</constant> and
+<constant>V4L2_CID_BACKLIGHT_COMPENSATION</constant> were added. The
+controls <constant>V4L2_CID_BLACK_LEVEL</constant>,
+<constant>V4L2_CID_WHITENESS</constant>,
+<constant>V4L2_CID_HCENTER</constant> and
+<constant>V4L2_CID_VCENTER</constant> were deprecated.
+</para>
+	</listitem>
+	<listitem>
+	  <para>A <link linkend="camera-controls">Camera controls
+class</link> was added, with the new controls
+<constant>V4L2_CID_EXPOSURE_AUTO</constant>,
+<constant>V4L2_CID_EXPOSURE_ABSOLUTE</constant>,
+<constant>V4L2_CID_EXPOSURE_AUTO_PRIORITY</constant>,
+<constant>V4L2_CID_PAN_RELATIVE</constant>,
+<constant>V4L2_CID_TILT_RELATIVE</constant>,
+<constant>V4L2_CID_PAN_RESET</constant>,
+<constant>V4L2_CID_TILT_RESET</constant>,
+<constant>V4L2_CID_PAN_ABSOLUTE</constant>,
+<constant>V4L2_CID_TILT_ABSOLUTE</constant>,
+<constant>V4L2_CID_FOCUS_ABSOLUTE</constant>,
+<constant>V4L2_CID_FOCUS_RELATIVE</constant> and
+<constant>V4L2_CID_FOCUS_AUTO</constant>.</para>
+	</listitem>
+	<listitem>
+	  <para>The <constant>VIDIOC_G_MPEGCOMP</constant> and
+<constant>VIDIOC_S_MPEGCOMP</constant> ioctls, which were superseded
+by the <link linkend="extended-controls">extended controls</link>
+interface in Linux 2.6.18, where finally removed from the
+<filename>videodev2.h</filename> header file.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.26</title>
+      <orderedlist>
+	<listitem>
+	  <para>The pixel formats
+<constant>V4L2_PIX_FMT_Y16</constant> and
+<constant>V4L2_PIX_FMT_SBGGR16</constant> were added.</para>
+	</listitem>
+	<listitem>
+	  <para>Added user controls
+<constant>V4L2_CID_CHROMA_AGC</constant> and
+<constant>V4L2_CID_COLOR_KILLER</constant>.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.27</title>
+      <orderedlist>
+	<listitem>
+	  <para>The &VIDIOC-S-HW-FREQ-SEEK; ioctl and the
+<constant>V4L2_CAP_HW_FREQ_SEEK</constant> capability were added.</para>
+	</listitem>
+	<listitem>
+	  <para>The pixel formats
+<constant>V4L2_PIX_FMT_YVYU</constant>,
+<constant>V4L2_PIX_FMT_PCA501</constant>,
+<constant>V4L2_PIX_FMT_PCA505</constant>,
+<constant>V4L2_PIX_FMT_PCA508</constant>,
+<constant>V4L2_PIX_FMT_PCA561</constant>,
+<constant>V4L2_PIX_FMT_SGBRG8</constant>,
+<constant>V4L2_PIX_FMT_PAC207</constant> and
+<constant>V4L2_PIX_FMT_PJPG</constant> were added.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.28</title>
+      <orderedlist>
+	<listitem>
+	  <para>Added <constant>V4L2_MPEG_AUDIO_ENCODING_AAC</constant> and
+<constant>V4L2_MPEG_AUDIO_ENCODING_AC3</constant> MPEG audio encodings.</para>
+	</listitem>
+	<listitem>
+	  <para>Added <constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC</constant> MPEG
+video encoding.</para>
+	</listitem>
+	<listitem>
+	  <para>The pixel formats
+<constant>V4L2_PIX_FMT_SGRBG10</constant> and
+<constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant> were added.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 2.6.29</title>
+      <orderedlist>
+	<listitem>
+	  <para>The <constant>VIDIOC_G_CHIP_IDENT</constant> ioctl was renamed
+to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and &VIDIOC-DBG-G-CHIP-IDENT;
+was introduced in its place. The old struct <structname>v4l2_chip_ident</structname>
+was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structname>.</para>
+	</listitem>
+	<listitem>
+	  <para>The pixel formats
+<constant>V4L2_PIX_FMT_VYUY</constant>,
+<constant>V4L2_PIX_FMT_NV16</constant> and
+<constant>V4L2_PIX_FMT_NV61</constant> were added.</para>
+	</listitem>
+	<listitem>
+	  <para>Added camera controls
+<constant>V4L2_CID_ZOOM_ABSOLUTE</constant>,
+<constant>V4L2_CID_ZOOM_RELATIVE</constant>,
+<constant>V4L2_CID_ZOOM_CONTINUOUS</constant> and
+<constant>V4L2_CID_PRIVACY</constant>.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.30</title>
+      <orderedlist>
+	<listitem>
+	  <para>New control flag <constant>V4L2_CTRL_FLAG_WRITE_ONLY</constant> was added.</para>
+	</listitem>
+	<listitem>
+	  <para>New control <constant>V4L2_CID_COLORFX</constant> was added.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.32</title>
+      <orderedlist>
+	<listitem>
+	  <para>In order to be easier to compare a V4L2 API and a kernel
+version, now V4L2 API is numbered using the Linux Kernel version numeration.</para>
+	</listitem>
+	<listitem>
+	  <para>Finalized the RDS capture API. See <xref linkend="rds" /> for
+more information.</para>
+	</listitem>
+	<listitem>
+	  <para>Added new capabilities for modulators and RDS encoders.</para>
+	</listitem>
+	<listitem>
+	  <para>Add description for libv4l API.</para>
+	</listitem>
+	<listitem>
+	  <para>Added support for string controls via new type <constant>V4L2_CTRL_TYPE_STRING</constant>.</para>
+	</listitem>
+	<listitem>
+	  <para>Added <constant>V4L2_CID_BAND_STOP_FILTER</constant> documentation.</para>
+	</listitem>
+	<listitem>
+	  <para>Added FM Modulator (FM TX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_TX</constant> and their Control IDs.</para>
+	</listitem>
+<listitem>
+	  <para>Added FM Receiver (FM RX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_RX</constant> and their Control IDs.</para>
+	</listitem>
+	<listitem>
+	  <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.33</title>
+      <orderedlist>
+	<listitem>
+	  <para>Added support for Digital Video timings in order to support HDTV receivers and transmitters.</para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.34</title>
+      <orderedlist>
+	<listitem>
+	  <para>Added
+<constant>V4L2_CID_IRIS_ABSOLUTE</constant> and
+<constant>V4L2_CID_IRIS_RELATIVE</constant> controls to the
+	    <link linkend="camera-controls">Camera controls class</link>.
+	  </para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.37</title>
+      <orderedlist>
+	<listitem>
+	  <para>Remove the vtx (videotext/teletext) API. This API was no longer
+used and no hardware exists to verify the API. Nor were any userspace applications found
+that used it. It was originally scheduled for removal in 2.6.35.
+	  </para>
+	</listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.39</title>
+      <orderedlist>
+        <listitem>
+          <para>The old VIDIOC_*_OLD symbols and V4L1 support were removed.</para>
+        </listitem>
+        <listitem>
+          <para>Multi-planar API added. Does not affect the compatibility of
+          current drivers and applications. See
+          <link linkend="planar-apis">multi-planar API</link>
+          for details.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 3.1</title>
+      <orderedlist>
+        <listitem>
+	  <para>VIDIOC_QUERYCAP now returns a per-subsystem version instead of a per-driver one.</para>
+	  <para>Standardize an error code for invalid ioctl.</para>
+          <para>Added V4L2_CTRL_TYPE_BITMASK.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 3.2</title>
+      <orderedlist>
+        <listitem>
+	  <para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para>
+        </listitem>
+        <listitem>
+	  <para>Add selection API for extended control over cropping
+	  and composing. Does not affect the compatibility of current
+	  drivers and applications. See <link
+	  linkend="selection-api"> selection API </link> for
+	  details.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.3</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added <constant>V4L2_CID_ALPHA_COMPONENT</constant> control
+	    to the <link linkend="control">User controls class</link>.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added the device_caps field to struct v4l2_capabilities and added the new
+	  V4L2_CAP_DEVICE_CAPS capability.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.4</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added <link linkend="jpeg-controls">JPEG compression control
+	  class</link>.</para>
+        </listitem>
+        <listitem>
+	  <para>Extended the DV Timings API:
+	  &VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and
+	  &VIDIOC-DV-TIMINGS-CAP;.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.5</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added integer menus, the new type will be
+	  V4L2_CTRL_TYPE_INTEGER_MENU.</para>
+        </listitem>
+        <listitem>
+	  <para>Added selection API for V4L2 subdev interface:
+	  &VIDIOC-SUBDEV-G-SELECTION; and
+	  &VIDIOC-SUBDEV-S-SELECTION;.</para>
+        </listitem>
+        <listitem>
+	  <para> Added <constant>V4L2_COLORFX_ANTIQUE</constant>,
+	  <constant>V4L2_COLORFX_ART_FREEZE</constant>,
+	  <constant>V4L2_COLORFX_AQUA</constant>,
+	  <constant>V4L2_COLORFX_SILHOUETTE</constant>,
+	  <constant>V4L2_COLORFX_SOLARIZATION</constant>,
+	  <constant>V4L2_COLORFX_VIVID</constant> and
+	  <constant>V4L2_COLORFX_ARBITRARY_CBCR</constant> menu items
+	  to the <constant>V4L2_CID_COLORFX</constant> control.</para>
+        </listitem>
+        <listitem>
+	  <para> Added <constant>V4L2_CID_COLORFX_CBCR</constant> control.</para>
+        </listitem>
+        <listitem>
+	  <para> Added camera controls <constant>V4L2_CID_AUTO_EXPOSURE_BIAS</constant>,
+	  <constant>V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE</constant>,
+	  <constant>V4L2_CID_IMAGE_STABILIZATION</constant>,
+	  <constant>V4L2_CID_ISO_SENSITIVITY</constant>,
+	  <constant>V4L2_CID_ISO_SENSITIVITY_AUTO</constant>,
+	  <constant>V4L2_CID_EXPOSURE_METERING</constant>,
+	  <constant>V4L2_CID_SCENE_MODE</constant>,
+	  <constant>V4L2_CID_3A_LOCK</constant>,
+	  <constant>V4L2_CID_AUTO_FOCUS_START</constant>,
+	  <constant>V4L2_CID_AUTO_FOCUS_STOP</constant>,
+	  <constant>V4L2_CID_AUTO_FOCUS_STATUS</constant> and
+	  <constant>V4L2_CID_AUTO_FOCUS_RANGE</constant>.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.6</title>
+      <orderedlist>
+	<listitem>
+	  <para>Replaced <structfield>input</structfield> in
+	  <structname>v4l2_buffer</structname> by
+	  <structfield>reserved2</structfield> and removed
+	  <constant>V4L2_BUF_FLAG_INPUT</constant>.</para>
+	</listitem>
+        <listitem>
+	  <para>Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capabilities.</para>
+        </listitem>
+        <listitem>
+	  <para>Added support for frequency band enumerations: &VIDIOC-ENUM-FREQ-BANDS;.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.9</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added timestamp types to
+	  <structfield>flags</structfield> field in
+	  <structname>v4l2_buffer</structname>. See <xref
+	  linkend="buffer-flags" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control event
+	  changes flag. See <xref linkend="changes-flags"/>.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.10</title>
+      <orderedlist>
+        <listitem>
+	  <para>Removed obsolete and unused DV_PRESET ioctls
+	  VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+	  VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability
+	  flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added new debugging ioctl &VIDIOC-DBG-G-CHIP-INFO;.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section id="other">
+      <title>Relation of V4L2 to other Linux multimedia APIs</title>
+
+      <section id="xvideo">
+        <title>X Video Extension</title>
+
+        <para>The X Video Extension (abbreviated XVideo or just Xv) is
+an extension of the X Window system, implemented for example by the
+XFree86 project. Its scope is similar to V4L2, an API to video capture
+and output devices for X clients. Xv allows applications to display
+live video in a window, send window contents to a TV output, and
+capture or output still images in XPixmaps<footnote>
+	  <para>This is not implemented in XFree86.</para>
+	</footnote>. With their implementation XFree86 makes the
+extension available across many operating systems and
+architectures.</para>
+
+        <para>Because the driver is embedded into the X server Xv has a
+number of advantages over the V4L2 <link linkend="overlay">video
+overlay interface</link>. The driver can easily determine the overlay
+target, &ie; visible graphics memory or off-screen buffers for a
+destructive overlay. It can program the RAMDAC for a non-destructive
+overlay, scaling or color-keying, or the clipping functions of the
+video capture hardware, always in sync with drawing operations or
+windows moving or changing their stacking order.</para>
+
+        <para>To combine the advantages of Xv and V4L a special Xv
+driver exists in XFree86 and XOrg, just programming any overlay capable
+Video4Linux device it finds. To enable it
+<filename>/etc/X11/XF86Config</filename> must contain these lines:</para>
+        <para><screen>
+Section "Module"
+    Load "v4l"
+EndSection</screen></para>
+
+        <para>As of XFree86 4.2 this driver still supports only V4L
+ioctls, however it should work just fine with all V4L2 devices through
+the V4L2 backward-compatibility layer. Since V4L2 permits multiple
+opens it is possible (if supported by the V4L2 driver) to capture
+video while an X client requested video overlay. Restrictions of
+simultaneous capturing and overlay are discussed in <xref
+	  linkend="overlay" /> apply.</para>
+
+        <para>Only marginally related to V4L2, XFree86 extended Xv to
+support hardware YUV to RGB conversion and scaling for faster video
+playback, and added an interface to MPEG-2 decoding hardware. This API
+is useful to display images captured with V4L2 devices.</para>
+      </section>
+
+      <section>
+        <title>Digital Video</title>
+
+        <para>V4L2 does not support digital terrestrial, cable or
+satellite broadcast. A separate project aiming at digital receivers
+exists. You can find its homepage at <ulink
+url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API
+has no connection to the V4L2 API except that drivers for hybrid
+hardware may support both.</para>
+      </section>
+
+      <section>
+        <title>Audio Interfaces</title>
+
+        <para>[to do - OSS/ALSA]</para>
+      </section>
+    </section>
+
+    <section id="experimental">
+      <title>Experimental API Elements</title>
+
+      <para>The following V4L2 API elements are currently experimental
+and may change in the future.</para>
+
+      <itemizedlist>
+        <listitem>
+	  <para>Video Output Overlay (OSD) Interface, <xref
+	    linkend="osd" />.</para>
+        </listitem>
+        <listitem>
+	  <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER;
+ioctls.</para>
+        </listitem>
+        <listitem>
+	  <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
+        </listitem>
+        <listitem>
+	  <para>&VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and
+	  &VIDIOC-DV-TIMINGS-CAP; ioctls.</para>
+        </listitem>
+        <listitem>
+	  <para>Flash API. <xref linkend="flash-controls" /></para>
+        </listitem>
+        <listitem>
+	  <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
+        </listitem>
+        <listitem>
+	  <para>Selection API. <xref linkend="selection-api" /></para>
+        </listitem>
+        <listitem>
+	  <para>Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION;
+	  and &VIDIOC-SUBDEV-S-SELECTION; ioctls.</para>
+        </listitem>
+        <listitem>
+	  <para>Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl.</para>
+        </listitem>
+        <listitem>
+	  <para>Vendor and device specific media bus pixel formats.
+	    <xref linkend="v4l2-mbus-vendor-spec-fmts" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Importing DMABUF file descriptors as a new IO method described
+	  in <xref linkend="dmabuf" />.</para>
+        </listitem>
+        <listitem>
+	  <para>Exporting DMABUF files using &VIDIOC-EXPBUF; ioctl.</para>
+        </listitem>
+      </itemizedlist>
+    </section>
+
+    <section id="obsolete">
+      <title>Obsolete API Elements</title>
+
+      <para>The following V4L2 API elements were superseded by new
+interfaces and should not be implemented in new drivers.</para>
+
+      <itemizedlist>
+        <listitem>
+	  <para><constant>VIDIOC_G_MPEGCOMP</constant> and
+<constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls,
+<xref linkend="extended-controls" />.</para>
+        </listitem>
+        <listitem>
+	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_ENUM_DV_PRESETS and
+	  VIDIOC_QUERY_DV_PRESET ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para>
+        </listitem>
+        <listitem>
+	  <para><constant>VIDIOC_SUBDEV_G_CROP</constant> and
+	  <constant>VIDIOC_SUBDEV_S_CROP</constant> ioctls. Use
+	  <constant>VIDIOC_SUBDEV_G_SELECTION</constant> and
+	  <constant>VIDIOC_SUBDEV_S_SELECTION</constant>, <xref
+	  linkend="vidioc-subdev-g-selection" />.</para>
+        </listitem>
+      </itemizedlist>
+    </section>
+  </section>

linux-imx/Documentation/DocBook/media/v4l/controls.xml

diff --git a/linux-imx/Documentation/DocBook/media/v4l/controls.xml b/linux-imx/Documentation/DocBook/media/v4l/controls.xml
new file mode 100644
index 0000000..8d7a779
--- /dev/null
+++ b/linux-imx/Documentation/DocBook/media/v4l/controls.xml
@@ -0,0 +1,4775 @@
+  <section id="control">
+    <title>User Controls</title>
+
+    <para>Devices typically have a number of user-settable controls
+such as brightness, saturation and so on, which would be presented to
+the user on a graphical user interface. But, different devices
+will have different controls available, and furthermore, the range of
+possible values, and the default value will vary from device to
+device. The control ioctls provide the information and a mechanism to
+create a nice user interface for these controls that will work
+correctly with any device.</para>
+
+    <para>All controls are accessed using an ID value. V4L2 defines
+several IDs for specific purposes. Drivers can also implement their
+own custom controls using <constant>V4L2_CID_PRIVATE_BASE</constant>
+and higher values. The pre-defined control IDs have the prefix
+<constant>V4L2_CID_</constant>, and are listed in <xref
+linkend="control-id" />. The ID is used when querying the attributes of
+a control, and when getting or setting the current value.</para>
+
+    <para>Generally applications should present controls to the user
+without assumptions about their purpose. Each control comes with a
+name string the user is supposed to understand. When the purpose is
+non-intuitive the driver writer should provide a user manual, a user
+interface plug-in or a driver specific panel application. Predefined
+IDs were introduced to change a few controls programmatically, for
+example to mute a device during a channel switch.</para>
+
+    <para>Drivers may enumerate different controls after switching
+the current video input or output, tuner or modulator, or audio input
+or output. Different in the sense of other bounds, another default and
+current value, step size or other menu items. A control with a certain
+<emphasis>custom</emphasis> ID can also change name and
+type.<footnote>
+	<para>It will be more convenient for applications if drivers
+make use of the <constant>V4L2_CTRL_FLAG_DISABLED</constant> flag, but
+that was never required.</para>
+      </footnote> Control values are stored globally, they do not
+change when switching except to stay within the reported bounds. They
+also do not change &eg; when the device is opened or closed, when the
+tuner radio frequency is changed or generally never without
+application request. Since V4L2 specifies no event mechanism, panel
+applications intended to cooperate with other panel applications (be
+they built into a larger application, as a TV viewer) may need to
+regularly poll control values to update their user
+interface.<footnote>
+	<para>Applications could call an ioctl to request events.
+After another process called &VIDIOC-S-CTRL; or another ioctl changing
+shared properties the &func-select; function would indicate
+readability until any ioctl (querying the properties) is
+called.</para>
+      </footnote></para>
+
+    <para>
+      All controls use machine endianness.
+    </para>
+
+    <table pgwide="1" frame="none" id="control-id">
+      <title>Control IDs</title>
+      <tgroup cols="3">
+	&cs-def;
+	<thead>
+	  <row>
+	    <entry>ID</entry>
+	    <entry>Type</entry>
+	    <entry>Description</entry>
+	  </row>
+	</thead>
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_CID_BASE</constant></entry>
+	    <entry></entry>
+	    <entry>First predefined ID, equal to
+<constant>V4L2_CID_BRIGHTNESS</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_USER_BASE</constant></entry>
+	    <entry></entry>
+	    <entry>Synonym of <constant>V4L2_CID_BASE</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_BRIGHTNESS</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Picture brightness, or more precisely, the black
+level.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_CONTRAST</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Picture contrast or luma gain.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_SATURATION</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Picture color saturation or chroma gain.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_HUE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Hue or color balance.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_VOLUME</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Overall audio volume. Note some drivers also
+provide an OSS or ALSA mixer interface.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_BALANCE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Audio stereo balance. Minimum corresponds to all
+the way left, maximum to right.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_BASS</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Audio bass adjustment.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_TREBLE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Audio treble adjustment.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_MUTE</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Mute audio, &ie; set the volume to zero, however
+without affecting <constant>V4L2_CID_AUDIO_VOLUME</constant>. Like
+ALSA drivers, V4L2 drivers must mute at load time to avoid excessive
+noise. Actually the entire device should be reset to a low power
+consumption state.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUDIO_LOUDNESS</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Loudness mode (bass boost).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_BLACK_LEVEL</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Another name for brightness (not a synonym of
+<constant>V4L2_CID_BRIGHTNESS</constant>). This control is deprecated
+and should not be used in new drivers and applications.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUTO_WHITE_BALANCE</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Automatic white balance (cameras).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_DO_WHITE_BALANCE</constant></entry>
+	    <entry>button</entry>
+	    <entry>This is an action control. When set (the value is
+ignored), the device will do a white balance and then hold the current
+setting. Contrast this with the boolean
+<constant>V4L2_CID_AUTO_WHITE_BALANCE</constant>, which, when
+activated, keeps adjusting the white balance.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_RED_BALANCE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Red chroma balance.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_BLUE_BALANCE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Blue chroma balance.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_GAMMA</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Gamma adjust.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_WHITENESS</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Whiteness for grey-scale devices. This is a synonym
+for <constant>V4L2_CID_GAMMA</constant>. This control is deprecated
+and should not be used in new drivers and applications.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_EXPOSURE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Exposure (cameras). [Unit?]</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUTOGAIN</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Automatic gain/exposure control.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_GAIN</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Gain control.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_HFLIP</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Mirror the picture horizontally.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_VFLIP</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Mirror the picture vertically.</entry>
+	  </row>
+	  <row id="v4l2-power-line-frequency">
+	    <entry><constant>V4L2_CID_POWER_LINE_FREQUENCY</constant></entry>
+	    <entry>enum</entry>
+	    <entry>Enables a power line frequency filter to avoid
+flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_HUE_AUTO</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Enables automatic hue control by the device. The
+effect of setting <constant>V4L2_CID_HUE</constant> while automatic
+hue control is enabled is undefined, drivers should ignore such
+request.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_WHITE_BALANCE_TEMPERATURE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>This control specifies the white balance settings
+as a color temperature in Kelvin. A driver should have a minimum of
+2800 (incandescent) to 6500 (daylight). For more information about
+color temperature see <ulink
+url="http://en.wikipedia.org/wiki/Color_temperature">Wikipedia</ulink>.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_SHARPNESS</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Adjusts the sharpness filters in a camera. The
+minimum value disables the filters, higher values give a sharper
+picture.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_BACKLIGHT_COMPENSATION</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Adjusts the backlight compensation in a camera. The
+minimum value disables backlight compensation.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_CHROMA_AGC</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Chroma automatic gain control.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_CHROMA_GAIN</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Adjusts the Chroma gain control (for use when chroma AGC
+	    is disabled).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_COLOR_KILLER</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Enable the color killer (&ie; force a black &amp; white image in case of a weak video signal).</entry>
+	  </row>
+	  <row id="v4l2-colorfx">
+	    <entry><constant>V4L2_CID_COLORFX</constant></entry>
+	    <entry>enum</entry>
+	    <entry>Selects a color effect. The following values are defined:
+	    </entry>
+	  </row><row>
+	  <entry></entry>
+	  <entry></entry>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_COLORFX_NONE</constant>&nbsp;</entry>
+		  <entry>Color effect is disabled.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_ANTIQUE</constant>&nbsp;</entry>
+		  <entry>An aging (old photo) effect.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_ART_FREEZE</constant>&nbsp;</entry>
+		  <entry>Frost color effect.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_AQUA</constant>&nbsp;</entry>
+		  <entry>Water color, cool tone.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_BW</constant>&nbsp;</entry>
+		  <entry>Black and white.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_EMBOSS</constant>&nbsp;</entry>
+		  <entry>Emboss, the highlights and shadows replace light/dark boundaries
+		  and low contrast areas are set to a gray background.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_GRASS_GREEN</constant>&nbsp;</entry>
+		  <entry>Grass green.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_NEGATIVE</constant>&nbsp;</entry>
+		  <entry>Negative.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SEPIA</constant>&nbsp;</entry>
+		  <entry>Sepia tone.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKETCH</constant>&nbsp;</entry>
+		  <entry>Sketch.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKIN_WHITEN</constant>&nbsp;</entry>
+		  <entry>Skin whiten.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKY_BLUE</constant>&nbsp;</entry>
+		  <entry>Sky blue.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SOLARIZATION</constant>&nbsp;</entry>
+		  <entry>Solarization, the image is partially reversed in tone,
+		  only color values above or below a certain threshold are inverted.
+		  </entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SILHOUETTE</constant>&nbsp;</entry>
+		  <entry>Silhouette (outline).</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_VIVID</constant>&nbsp;</entry>
+		  <entry>Vivid colors.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SET_CBCR</constant>&nbsp;</entry>
+		  <entry>The Cb and Cr chroma components are replaced by fixed
+		  coefficients determined by <constant>V4L2_CID_COLORFX_CBCR</constant>
+		  control.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_COLORFX_CBCR</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Determines the Cb and Cr coefficients for <constant>V4L2_COLORFX_SET_CBCR</constant>
+	    color effect. Bits [7:0] of the supplied 32 bit value are interpreted as
+	    Cr component, bits [15:8] as Cb component and bits [31:16] must be zero.
+	  </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_AUTOBRIGHTNESS</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Enable Automatic Brightness.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_ROTATE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Rotates the image by specified angle. Common angles are 90,
+	    270 and 180. Rotating the image to 90 and 270 will reverse the height
+	    and width of the display window. It is necessary to set the new height and
+	    width of the picture using the &VIDIOC-S-FMT; ioctl according to
+	    the rotation angle selected.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_BG_COLOR</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Sets the background color on the current output device.
+	    Background color needs to be specified in the RGB24 format. The
+	    supplied 32 bit value is interpreted as bits 0-7 Red color information,
+	    bits 8-15 Green color information, bits 16-23 Blue color
+	    information and bits 24-31 must be zero.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_ILLUMINATORS_1</constant>
+		<constant>V4L2_CID_ILLUMINATORS_2</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Switch on or off the illuminator 1 or 2 of the device
+		(usually a microscope).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>This is a read-only control that can be read by the application
+and used as a hint to determine the number of CAPTURE buffers to pass to REQBUFS.
+The value is the minimum number of CAPTURE buffers that is necessary for hardware
+to work.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_OUTPUT</constant></entry>
+	    <entry>integer</entry>
+	    <entry>This is a read-only control that can be read by the application
+and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS.
+The value is the minimum number of OUTPUT buffers that is necessary for hardware
+to work.</entry>
+	  </row>
+	  <row id="v4l2-alpha-component">
+	    <entry><constant>V4L2_CID_ALPHA_COMPONENT</constant></entry>
+	    <entry>integer</entry>
+	    <entry> Sets the alpha color component on the capture device or on
+	    the capture buffer queue of a mem-to-mem device. When a mem-to-mem
+	    device produces frame format that includes an alpha component
+	    (e.g. <link linkend="rgb-formats">packed RGB image formats</link>)
+	    and the alpha value is not defined by the mem-to-mem input data
+	    this control lets you select the alpha component value of all
+	    pixels. It is applicable to any pixel format that contains an alpha
+	    component.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_LASTP1</constant></entry>
+	    <entry></entry>
+	    <entry>End of the predefined control IDs (currently
+	      <constant>V4L2_CID_ALPHA_COMPONENT</constant> + 1).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
+	    <entry></entry>
+	    <entry>ID of the first custom (driver specific) control.
+Applications depending on particular custom controls should check the
+driver name and version, see <xref linkend="querycap" />.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <para>Applications can enumerate the available controls with the
+&VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls, get and set a
+control value with the &VIDIOC-G-CTRL; and &VIDIOC-S-CTRL; ioctls.
+Drivers must implement <constant>VIDIOC_QUERYCTRL</constant>,
+<constant>VIDIOC_G_CTRL</constant> and
+<constant>VIDIOC_S_CTRL</constant> when the device has one or more
+controls, <constant>VIDIOC_QUERYMENU</constant> when it has one or
+more menu type controls.</para>
+
+    <example>
+      <title>Enumerating all controls</title>
+
+      <programlisting>
+&v4l2-queryctrl; queryctrl;
+&v4l2-querymenu; querymenu;
+
+static void
+enumerate_menu (void)
+{
+	printf ("  Menu items:\n");
+
+	memset (&amp;querymenu, 0, sizeof (querymenu));
+	querymenu.id = queryctrl.id;
+
+	for (querymenu.index = queryctrl.minimum;
+	     querymenu.index &lt;= queryctrl.maximum;
+	      querymenu.index++) {
+		if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &amp;querymenu)) {
+			printf ("  %s\n", querymenu.name);
+		}
+	}
+}
+
+memset (&amp;queryctrl, 0, sizeof (queryctrl));
+
+for (queryctrl.id = V4L2_CID_BASE;
+     queryctrl.id &lt; V4L2_CID_LASTP1;
+     queryctrl.id++) {
+	if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &amp;queryctrl)) {
+		if (queryctrl.flags &amp; V4L2_CTRL_FLAG_DISABLED)
+			continue;
+
+		printf ("Control %s\n", queryctrl.name);
+
+		if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
+			enumerate_menu ();
+	} else {
+		if (errno == EINVAL)
+			continue;
+
+		perror ("VIDIOC_QUERYCTRL");
+		exit (EXIT_FAILURE);
+	}
+}
+
+for (queryctrl.id = V4L2_CID_PRIVATE_BASE;;
+     queryctrl.id++) {
+	if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &amp;queryctrl)) {
+		if (queryctrl.flags &amp; V4L2_CTRL_FLAG_DISABLED)
+			continue;
+
+		printf ("Control %s\n", queryctrl.name);
+
+		if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
+			enumerate_menu ();
+	} else {
+		if (errno == EINVAL)
+			break;
+
+		perror ("VIDIOC_QUERYCTRL");
+		exit (EXIT_FAILURE);
+	}
+}
+</programlisting>
+    </example>
+
+    <example>
+      <title>Changing controls</title>
+
+      <programlisting>
+&v4l2-queryctrl; queryctrl;
+&v4l2-control; control;
+
+memset (&amp;queryctrl, 0, sizeof (queryctrl));
+queryctrl.id = V4L2_CID_BRIGHTNESS;
+
+if (-1 == ioctl (fd, &VIDIOC-QUERYCTRL;, &amp;queryctrl)) {
+	if (errno != EINVAL) {
+		perror ("VIDIOC_QUERYCTRL");
+		exit (EXIT_FAILURE);
+	} else {
+		printf ("V4L2_CID_BRIGHTNESS is not supported\n");
+	}
+} else if (queryctrl.flags &amp; V4L2_CTRL_FLAG_DISABLED) {
+	printf ("V4L2_CID_BRIGHTNESS is not supported\n");
+} else {
+	memset (&amp;control, 0, sizeof (control));
+	control.id = V4L2_CID_BRIGHTNESS;
+	control.value = queryctrl.default_value;
+
+	if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &amp;control)) {
+		perror ("VIDIOC_S_CTRL");
+		exit (EXIT_FAILURE);
+	}
+}
+
+memset (&amp;control, 0, sizeof (control));
+control.id = V4L2_CID_CONTRAST;
+
+if (0 == ioctl (fd, &VIDIOC-G-CTRL;, &amp;control)) {
+	control.value += 1;
+
+	/* The driver may clamp the value or return ERANGE, ignored here */
+
+	if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &amp;control)
+	    &amp;&amp; errno != ERANGE) {
+		perror ("VIDIOC_S_CTRL");
+		exit (EXIT_FAILURE);
+	}
+/* Ignore if V4L2_CID_CONTRAST is unsupported */
+} else if (errno != EINVAL) {
+	perror ("VIDIOC_G_CTRL");
+	exit (EXIT_FAILURE);
+}
+
+control.id = V4L2_CID_AUDIO_MUTE;
+control.value = TRUE; /* silence */
+
+/* Errors ignored */
+ioctl (fd, VIDIOC_S_CTRL, &amp;control);
+</programlisting>
+    </example>
+  </section>
+
+  <section id="extended-controls">
+    <title>Extended Controls</title>
+
+    <section>
+      <title>Introduction</title>
+
+      <para>The control mechanism as originally designed was meant
+to be used for user settings (brightness, saturation, etc). However,
+it turned out to be a very useful model for implementing more
+complicated driver APIs where each driver implements only a subset of
+a larger API.</para>
+
+      <para>The MPEG encoding API was the driving force behind
+designing and implementing this extended control mechanism: the MPEG
+standard is quite large and the currently supported hardware MPEG
+encoders each only implement a subset of this standard. Further more,
+many parameters relating to how the video is encoded into an MPEG
+stream are specific to the MPEG encoding chip since the MPEG standard
+only defines the format of the resulting MPEG stream, not how the
+video is actually encoded into that format.</para>
+
+      <para>Unfortunately, the original control API lacked some
+features needed for these new uses and so it was extended into the
+(not terribly originally named) extended control API.</para>
+
+      <para>Even though the MPEG encoding API was the first effort
+to use the Extended Control API, nowadays there are also other classes
+of Extended Controls, such as Camera Controls and FM Transmitter Controls.
+The Extended Controls API as well as all Extended Controls classes are
+described in the following text.</para>
+    </section>
+
+    <section>
+      <title>The Extended Control API</title>
+
+      <para>Three new ioctls are available: &VIDIOC-G-EXT-CTRLS;,
+&VIDIOC-S-EXT-CTRLS; and &VIDIOC-TRY-EXT-CTRLS;. These ioctls act on
+arrays of controls (as opposed to the &VIDIOC-G-CTRL; and
+&VIDIOC-S-CTRL; ioctls that act on a single control). This is needed
+since it is often required to atomically change several controls at
+once.</para>
+
+      <para>Each of the new ioctls expects a pointer to a
+&v4l2-ext-controls;. This structure contains a pointer to the control
+array, a count of the number of controls in that array and a control
+class. Control classes are used to group similar controls into a
+single class. For example, control class
+<constant>V4L2_CTRL_CLASS_USER</constant> contains all user controls
+(&ie; all controls that can also be set using the old
+<constant>VIDIOC_S_CTRL</constant> ioctl). Control class
+<constant>V4L2_CTRL_CLASS_MPEG</constant> contains all controls
+relating to MPEG encoding, etc.</para>
+
+      <para>All controls in the control array must belong to the
+specified control class. An error is returned if this is not the
+case.</para>
+
+      <para>It is also possible to use an empty control array (count
+== 0) to check whether the specified control class is
+supported.</para>
+
+      <para>The control array is a &v4l2-ext-control; array. The
+<structname>v4l2_ext_control</structname> structure is very similar to
+&v4l2-control;, except for the fact that it also allows for 64-bit
+values and pointers to be passed.</para>
+
+      <para>It is important to realize that due to the flexibility of
+controls it is necessary to check whether the control you want to set
+actually is supported in the driver and what the valid range of values
+is. So use the &VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls to
+check this. Also note that it is possible that some of the menu
+indices in a control of type <constant>V4L2_CTRL_TYPE_MENU</constant>
+may not be supported (<constant>VIDIOC_QUERYMENU</constant> will
+return an error). A good example is the list of supported MPEG audio
+bitrates. Some drivers only support one or two bitrates, others
+support a wider range.</para>
+
+      <para>
+	All controls use machine endianness.
+      </para>
+    </section>
+
+    <section>
+      <title>Enumerating Extended Controls</title>
+
+      <para>The recommended way to enumerate over the extended
+controls is by using &VIDIOC-QUERYCTRL; in combination with the
+<constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant> flag:</para>
+
+      <informalexample>
+	<programlisting>
+&v4l2-queryctrl; qctrl;
+
+qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
+while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &amp;qctrl)) {
+	/* ... */
+	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+}
+</programlisting>
+      </informalexample>
+
+      <para>The initial control ID is set to 0 ORed with the
+<constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant> flag. The
+<constant>VIDIOC_QUERYCTRL</constant> ioctl will return the first
+control with a higher ID than the specified one. When no such controls
+are found an error is returned.</para>
+
+      <para>If you want to get all controls within a specific control
+class, then you can set the initial
+<structfield>qctrl.id</structfield> value to the control class and add
+an extra check to break out of the loop when a control of another
+control class is found:</para>
+
+      <informalexample>
+	<programlisting>
+qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL;
+while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &amp;qctrl)) {
+	if (V4L2_CTRL_ID2CLASS (qctrl.id) != V4L2_CTRL_CLASS_MPEG)
+		break;
+		/* ... */
+		qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
+	}
+</programlisting>
+      </informalexample>
+
+      <para>The 32-bit <structfield>qctrl.id</structfield> value is
+subdivided into three bit ranges: the top 4 bits are reserved for
+flags (&eg; <constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant>) and are not
+actually part of the ID. The remaining 28 bits form the control ID, of
+which the most significant 12 bits define the control class and the
+least significant 16 bits identify the control within the control
+class. It is guaranteed that these last 16 bits are always non-zero
+for controls. The range of 0x1000 and up are reserved for
+driver-specific controls. The macro
+<constant>V4L2_CTRL_ID2CLASS(id)</constant> returns the control class
+ID based on a control ID.</para>
+
+      <para>If the driver does not support extended controls, then
+<constant>VIDIOC_QUERYCTRL</constant> will fail when used in
+combination with <constant>V4L2_CTRL_FLAG_NEXT_CTRL</constant>. In
+that case the old method of enumerating control should be used (see
+1.8). But if it is supported, then it is guaranteed to enumerate over
+all controls, including driver-private controls.</para>
+    </section>
+
+    <section>
+      <title>Creating Control Panels</title>
+
+      <para>It is possible to create control panels for a graphical
+user interface where the user can select the various controls.
+Basically you will have to iterate over all controls using the method
+described above. Each control class starts with a control of type
+<constant>V4L2_CTRL_TYPE_CTRL_CLASS</constant>.
+<constant>VIDIOC_QUERYCTRL</constant> will return the name of this
+control class which can be used as the title of a tab page within a
+control panel.</para>
+
+      <para>The flags field of &v4l2-queryctrl; also contains hints on
+the behavior of the control. See the &VIDIOC-QUERYCTRL; documentation
+for more details.</para>
+    </section>
+
+    <section id="mpeg-controls">
+      <title>MPEG Control Reference</title>
+
+      <para>Below all controls within the MPEG control class are
+described. First the generic controls, then controls specific for
+certain hardware.</para>
+
+      <section>
+	<title>Generic MPEG Controls</title>
+
+	<table pgwide="1" frame="none" id="mpeg-control-id">
+	  <title>MPEG Control IDs</title>
+	  <tgroup cols="4">
+	    <colspec colname="c1" colwidth="1*" />
+	    <colspec colname="c2" colwidth="6*" />
+	    <colspec colname="c3" colwidth="2*" />
+	    <colspec colname="c4" colwidth="6*" />
+	    <spanspec namest="c1" nameend="c2" spanname="id" />
+	    <spanspec namest="c2" nameend="c4" spanname="descr" />
+	    <thead>
+	      <row>
+		<entry spanname="id" align="left">ID</entry>
+		<entry align="left">Type</entry>
+	      </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_CLASS</constant>&nbsp;</entry>
+		<entry>class</entry>
+	      </row><row><entry spanname="descr">The MPEG class
+descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
+description of this control class. This description can be used as the
+caption of a Tab page in a GUI, for example.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-stream-type">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_TYPE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_stream_type</entry>
+	      </row><row><entry spanname="descr">The MPEG-1, -2 or -4
+output stream type. One cannot assume anything here. Each hardware
+MPEG encoder tends to support different subsets of the available MPEG
+stream types. This control is specific to multiplexed MPEG streams.
+The currently defined stream types are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_PS</constant>&nbsp;</entry>
+		      <entry>MPEG-2 program stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_TS</constant>&nbsp;</entry>
+		      <entry>MPEG-2 transport stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG1_SS</constant>&nbsp;</entry>
+		      <entry>MPEG-1 system stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_DVD</constant>&nbsp;</entry>
+		      <entry>MPEG-2 DVD-compatible stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG1_VCD</constant>&nbsp;</entry>
+		      <entry>MPEG-1 VCD-compatible stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD</constant>&nbsp;</entry>
+		      <entry>MPEG-2 SVCD-compatible stream</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_PMT</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Program Map Table
+Packet ID for the MPEG transport stream (default 16)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_AUDIO</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Audio Packet ID for
+the MPEG transport stream (default 256)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_VIDEO</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Video Packet ID for
+the MPEG transport stream (default 260)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PID_PCR</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Packet ID for the
+MPEG transport stream carrying PCR fields (default 259)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PES_ID_AUDIO</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Audio ID for MPEG
+PES</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_PES_ID_VIDEO</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Video ID for MPEG
+PES</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-stream-vbi-fmt">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_STREAM_VBI_FMT</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_stream_vbi_fmt</entry>
+	      </row><row><entry spanname="descr">Some cards can embed
+VBI data (&eg; Closed Caption, Teletext) into the MPEG stream. This
+control selects whether VBI data should be embedded, and if so, what
+embedding method should be used. The list of possible VBI formats
+depends on the driver. The currently defined VBI format types
+are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_VBI_FMT_NONE</constant>&nbsp;</entry>
+		      <entry>No VBI in the MPEG stream</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_STREAM_VBI_FMT_IVTV</constant>&nbsp;</entry>
+		      <entry>VBI in private packets, IVTV format (documented
+in the kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.vbi</filename>)</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-sampling-freq">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_sampling_freq</entry>
+	      </row><row><entry spanname="descr">MPEG Audio sampling
+frequency. Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100</constant>&nbsp;</entry>
+		      <entry>44.1 kHz</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000</constant>&nbsp;</entry>
+		      <entry>48 kHz</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000</constant>&nbsp;</entry>
+		      <entry>32 kHz</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-encoding">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_ENCODING</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_encoding</entry>
+	      </row><row><entry spanname="descr">MPEG Audio encoding.
+This control is specific to multiplexed MPEG streams.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_1</constant>&nbsp;</entry>
+		      <entry>MPEG-1/2 Layer I encoding</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_2</constant>&nbsp;</entry>
+		      <entry>MPEG-1/2 Layer II encoding</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_ENCODING_LAYER_3</constant>&nbsp;</entry>
+		      <entry>MPEG-1/2 Layer III encoding</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_ENCODING_AAC</constant>&nbsp;</entry>
+		      <entry>MPEG-2/4 AAC (Advanced Audio Coding)</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_ENCODING_AC3</constant>&nbsp;</entry>
+		      <entry>AC-3 aka ATSC A/52 encoding</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-l1-bitrate">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L1_BITRATE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_l1_bitrate</entry>
+	      </row><row><entry spanname="descr">MPEG-1/2 Layer I bitrate.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_32K</constant>&nbsp;</entry>
+		      <entry>32 kbit/s</entry></row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_64K</constant>&nbsp;</entry>
+		      <entry>64 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_96K</constant>&nbsp;</entry>
+		      <entry>96 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_128K</constant>&nbsp;</entry>
+		      <entry>128 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_160K</constant>&nbsp;</entry>
+		      <entry>160 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_192K</constant>&nbsp;</entry>
+		      <entry>192 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_224K</constant>&nbsp;</entry>
+		      <entry>224 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_256K</constant>&nbsp;</entry>
+		      <entry>256 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_288K</constant>&nbsp;</entry>
+		      <entry>288 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_320K</constant>&nbsp;</entry>
+		      <entry>320 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_352K</constant>&nbsp;</entry>
+		      <entry>352 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_384K</constant>&nbsp;</entry>
+		      <entry>384 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_416K</constant>&nbsp;</entry>
+		      <entry>416 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L1_BITRATE_448K</constant>&nbsp;</entry>
+		      <entry>448 kbit/s</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-l2-bitrate">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L2_BITRATE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_l2_bitrate</entry>
+	      </row><row><entry spanname="descr">MPEG-1/2 Layer II bitrate.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_32K</constant>&nbsp;</entry>
+		      <entry>32 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_48K</constant>&nbsp;</entry>
+		      <entry>48 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_56K</constant>&nbsp;</entry>
+		      <entry>56 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_64K</constant>&nbsp;</entry>
+		      <entry>64 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_80K</constant>&nbsp;</entry>
+		      <entry>80 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_96K</constant>&nbsp;</entry>
+		      <entry>96 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_112K</constant>&nbsp;</entry>
+		      <entry>112 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_128K</constant>&nbsp;</entry>
+		      <entry>128 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_160K</constant>&nbsp;</entry>
+		      <entry>160 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_192K</constant>&nbsp;</entry>
+		      <entry>192 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_224K</constant>&nbsp;</entry>
+		      <entry>224 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_256K</constant>&nbsp;</entry>
+		      <entry>256 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_320K</constant>&nbsp;</entry>
+		      <entry>320 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L2_BITRATE_384K</constant>&nbsp;</entry>
+		      <entry>384 kbit/s</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-l3-bitrate">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_L3_BITRATE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_l3_bitrate</entry>
+	      </row><row><entry spanname="descr">MPEG-1/2 Layer III bitrate.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_32K</constant>&nbsp;</entry>
+		      <entry>32 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_40K</constant>&nbsp;</entry>
+		      <entry>40 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_48K</constant>&nbsp;</entry>
+		      <entry>48 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_56K</constant>&nbsp;</entry>
+		      <entry>56 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_64K</constant>&nbsp;</entry>
+		      <entry>64 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_80K</constant>&nbsp;</entry>
+		      <entry>80 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_96K</constant>&nbsp;</entry>
+		      <entry>96 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_112K</constant>&nbsp;</entry>
+		      <entry>112 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_128K</constant>&nbsp;</entry>
+		      <entry>128 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_160K</constant>&nbsp;</entry>
+		      <entry>160 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_192K</constant>&nbsp;</entry>
+		      <entry>192 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_224K</constant>&nbsp;</entry>
+		      <entry>224 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_256K</constant>&nbsp;</entry>
+		      <entry>256 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_L3_BITRATE_320K</constant>&nbsp;</entry>
+		      <entry>320 kbit/s</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_AAC_BITRATE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">AAC bitrate in bits per second.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-ac3-bitrate">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_AC3_BITRATE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_ac3_bitrate</entry>
+	      </row><row><entry spanname="descr">AC-3 bitrate.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_32K</constant>&nbsp;</entry>
+		      <entry>32 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_40K</constant>&nbsp;</entry>
+		      <entry>40 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_48K</constant>&nbsp;</entry>
+		      <entry>48 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_56K</constant>&nbsp;</entry>
+		      <entry>56 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_64K</constant>&nbsp;</entry>
+		      <entry>64 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_80K</constant>&nbsp;</entry>
+		      <entry>80 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_96K</constant>&nbsp;</entry>
+		      <entry>96 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_112K</constant>&nbsp;</entry>
+		      <entry>112 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_128K</constant>&nbsp;</entry>
+		      <entry>128 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_160K</constant>&nbsp;</entry>
+		      <entry>160 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_192K</constant>&nbsp;</entry>
+		      <entry>192 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_224K</constant>&nbsp;</entry>
+		      <entry>224 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_256K</constant>&nbsp;</entry>
+		      <entry>256 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_320K</constant>&nbsp;</entry>
+		      <entry>320 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_384K</constant>&nbsp;</entry>
+		      <entry>384 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_448K</constant>&nbsp;</entry>
+		      <entry>448 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_512K</constant>&nbsp;</entry>
+		      <entry>512 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_576K</constant>&nbsp;</entry>
+		      <entry>576 kbit/s</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_AC3_BITRATE_640K</constant>&nbsp;</entry>
+		      <entry>640 kbit/s</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-mode">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_mode</entry>
+	      </row><row><entry spanname="descr">MPEG Audio mode.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_STEREO</constant>&nbsp;</entry>
+		      <entry>Stereo</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_JOINT_STEREO</constant>&nbsp;</entry>
+		      <entry>Joint Stereo</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_DUAL</constant>&nbsp;</entry>
+		      <entry>Bilingual</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_MONO</constant>&nbsp;</entry>
+		      <entry>Mono</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-mode-extension">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MODE_EXTENSION</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_mode_extension</entry>
+	      </row><row><entry spanname="descr">Joint Stereo
+audio mode extension. In Layer I and II they indicate which subbands
+are in intensity stereo. All other subbands are coded in stereo. Layer
+III is not (yet) supported. Possible values
+are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4</constant>&nbsp;</entry>
+		      <entry>Subbands 4-31 in intensity stereo</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8</constant>&nbsp;</entry>
+		      <entry>Subbands 8-31 in intensity stereo</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12</constant>&nbsp;</entry>
+		      <entry>Subbands 12-31 in intensity stereo</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16</constant>&nbsp;</entry>
+		      <entry>Subbands 16-31 in intensity stereo</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-emphasis">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_EMPHASIS</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_emphasis</entry>
+	      </row><row><entry spanname="descr">Audio Emphasis.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_NONE</constant>&nbsp;</entry>
+		      <entry>None</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS</constant>&nbsp;</entry>
+		      <entry>50/15 microsecond emphasis</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17</constant>&nbsp;</entry>
+		      <entry>CCITT J.17</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-crc">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_CRC</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_crc</entry>
+	      </row><row><entry spanname="descr">CRC method. Possible
+values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_CRC_NONE</constant>&nbsp;</entry>
+		      <entry>None</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_CRC_CRC16</constant>&nbsp;</entry>
+		      <entry>16 bit parity check</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_MUTE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Mutes the audio when
+capturing. This is not done by muting audio hardware, which can still
+produce a slight hiss, but in the encoder itself, guaranteeing a fixed
+and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-dec-playback">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_dec_playback</entry>
+	      </row><row><entry spanname="descr">Determines how monolingual audio should be played back.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO</constant>&nbsp;</entry>
+		      <entry>Automatically determines the best playback mode.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO</constant>&nbsp;</entry>
+		      <entry>Stereo playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT</constant>&nbsp;</entry>
+		      <entry>Left channel playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT</constant>&nbsp;</entry>
+		      <entry>Right channel playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO</constant>&nbsp;</entry>
+		      <entry>Mono playback.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO</constant>&nbsp;</entry>
+		      <entry>Stereo playback with swapped left and right channels.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-audio-dec-multilingual-playback">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_audio_dec_playback</entry>
+	      </row><row><entry spanname="descr">Determines how multilingual audio should be played back.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-encoding">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_encoding</entry>
+	      </row><row><entry spanname="descr">MPEG Video encoding
+method. This control is specific to multiplexed MPEG streams.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_1</constant>&nbsp;</entry>
+		      <entry>MPEG-1 Video encoding</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_2</constant>&nbsp;</entry>
+		      <entry>MPEG-2 Video encoding</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC</constant>&nbsp;</entry>
+		      <entry>MPEG-4 AVC (H.264) Video encoding</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-aspect">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ASPECT</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_aspect</entry>
+	      </row><row><entry spanname="descr">Video aspect.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ASPECT_1x1</constant>&nbsp;</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ASPECT_4x3</constant>&nbsp;</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ASPECT_16x9</constant>&nbsp;</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_ASPECT_221x100</constant>&nbsp;</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_B_FRAMES</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Number of B-Frames
+(default 2)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_GOP_SIZE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">GOP size (default
+12)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_GOP_CLOSURE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">GOP closure (default
+1)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_PULLDOWN</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Enable 3:2 pulldown
+(default 0)</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-bitrate-mode">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_bitrate_mode</entry>
+	      </row><row><entry spanname="descr">Video bitrate mode.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_BITRATE_MODE_VBR</constant>&nbsp;</entry>
+		      <entry>Variable bitrate</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_BITRATE_MODE_CBR</constant>&nbsp;</entry>
+		      <entry>Constant bitrate</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Video bitrate in bits
+per second.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_BITRATE_PEAK</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Peak video bitrate in
+bits per second. Must be larger or equal to the average video bitrate.
+It is ignored if the video bitrate mode is set to constant
+bitrate.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">For every captured
+frame, skip this many subsequent frames (default 0).</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MUTE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">"Mutes" the video to a
+fixed color when capturing. This is useful for testing, to produce a
+fixed video bitstream. 0 = unmuted, 1 = muted.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MUTE_YUV</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Sets the "mute" color
+of the video. The supplied 32-bit integer is interpreted as follows (bit
+0 = least significant bit):</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry>Bit 0:7</entry>
+		      <entry>V chrominance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 8:15</entry>
+		      <entry>U chrominance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 16:23</entry>
+		      <entry>Y luminance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 24:31</entry>
+		      <entry>Must be zero.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-dec-pts">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant>&nbsp;</entry>
+		<entry>integer64</entry>
+	      </row><row><entry spanname="descr">This read-only control returns the
+33-bit video Presentation Time Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of
+the currently displayed frame. This is the same PTS as is used in &VIDIOC-DECODER-CMD;.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-dec-frame">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant>&nbsp;</entry>
+		<entry>integer64</entry>
+	      </row><row><entry spanname="descr">This read-only control returns the
+frame counter of the frame that is currently displayed (decoded). This value is reset to 0 whenever
+the decoder is started.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">If enabled the decoder expects to receive a single slice per buffer, otherwise
+the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs.
+</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Enable writing sample aspect ratio in the Video Usability Information.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-h264-vui-sar-idc">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_h264_vui_sar_idc</entry>
+	      </row>
+	      <row><entry spanname="descr">VUI sample aspect ratio indicator for H.264 encoding. The value
+is defined in the table E-1 in the standard. Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED</constant>&nbsp;</entry>
+			  <entry>Unspecified</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1</constant>&nbsp;</entry>
+			  <entry>1x1</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11</constant>&nbsp;</entry>
+			  <entry>12x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11</constant>&nbsp;</entry>
+			  <entry>10x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11</constant>&nbsp;</entry>
+			  <entry>16x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33</constant>&nbsp;</entry>
+			  <entry>40x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11</constant>&nbsp;</entry>
+			  <entry>24x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11</constant>&nbsp;</entry>
+			  <entry>20x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11</constant>&nbsp;</entry>
+			  <entry>32x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33</constant>&nbsp;</entry>
+			  <entry>80x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11</constant>&nbsp;</entry>
+			  <entry>18x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11</constant>&nbsp;</entry>
+			  <entry>15x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33</constant>&nbsp;</entry>
+			  <entry>64x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99</constant>&nbsp;</entry>
+			  <entry>160x99</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3</constant>&nbsp;</entry>
+			  <entry>4x3</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2</constant>&nbsp;</entry>
+			  <entry>3x2</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1</constant>&nbsp;</entry>
+			  <entry>2x1</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED</constant>&nbsp;</entry>
+			  <entry>Extended SAR</entry>
+			</row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Extended sample aspect ratio width for H.264 VUI encoding.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Extended sample aspect ratio height for H.264 VUI encoding.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-h264-level">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_h264_level</entry>
+	      </row>
+	      <row><entry spanname="descr">The level information for the H264 video elementary stream.
+Applicable to the H264 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_0</constant>&nbsp;</entry>