| # Makefile.in generated by automake 1.7.9 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| # Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # what is your philosophy - distribute pre-made .pdf et al in a make dist |
| # or not? choose your EXTRA_DIST line accordingly |
| # EXTRA_DIST = netperf.man netserver.man netperf.txt netperf.html netperf.xml netperf_old.ps netperf.pdf netperf.ps netperf.texi examples |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = .. |
| |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| host_triplet = @host@ |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| GREP = @GREP@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAKEINFO = @MAKEINFO@ |
| NEED_LIBCOMPAT_FALSE = @NEED_LIBCOMPAT_FALSE@ |
| NEED_LIBCOMPAT_TRUE = @NEED_LIBCOMPAT_TRUE@ |
| NETCPU_SOURCE = @NETCPU_SOURCE@ |
| NETDRVLKUP_SOURCE = @NETDRVLKUP_SOURCE@ |
| NETRTLKUP_SOURCE = @NETRTLKUP_SOURCE@ |
| NETSECLKUP_SOURCE = @NETSECLKUP_SOURCE@ |
| NETSLOTLKUP_SOURCE = @NETSLOTLKUP_SOURCE@ |
| NETSYSLKUP_SOURCE = @NETSYSLKUP_SOURCE@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| ac_ct_CC = @ac_ct_CC@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| |
| SUBDIRS = examples |
| |
| EXTRA_DIST = netperf.man netserver.man netperf_old.ps netperf.texi |
| man1_MANS = netperf.man netserver.man |
| info_TEXINFOS = netperf.texi |
| CLEANFILES = netperf.txt netperf.xml netperf.html |
| subdir = doc |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| DIST_SOURCES = |
| am__TEXINFO_TEX_DIR = $(srcdir) |
| INFO_DEPS = netperf.info |
| DVIS = netperf.dvi |
| PDFS = netperf.pdf |
| PSS = netperf.ps |
| TEXINFOS = netperf.texi |
| |
| NROFF = nroff |
| MANS = $(man1_MANS) |
| |
| RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ |
| ps-recursive install-info-recursive uninstall-info-recursive \ |
| all-recursive install-data-recursive install-exec-recursive \ |
| installdirs-recursive install-recursive uninstall-recursive \ |
| check-recursive installcheck-recursive |
| DIST_COMMON = $(srcdir)/Makefile.in Makefile.am texinfo.tex |
| DIST_SUBDIRS = $(SUBDIRS) |
| all: all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .dvi .info .pdf .ps .texi |
| $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) |
| |
| .texi.info: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9] |
| $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ `test -f '$<' || echo '$(srcdir)/'`$< |
| |
| .texi.dvi: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) `test -f '$<' || echo '$(srcdir)/'`$< |
| |
| .texi.pdf: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) `test -f '$<' || echo '$(srcdir)/'`$< |
| netperf.info: netperf.texi |
| netperf.dvi: netperf.texi |
| netperf.pdf: netperf.texi |
| TEXI2DVI = texi2dvi |
| |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| DVIPS = dvips |
| .dvi.ps: |
| $(DVIPS) -o $@ $< |
| |
| uninstall-info-am: |
| $(PRE_UNINSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \ |
| install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if cd $(DESTDIR)$(infodir); then \ |
| echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| for file in $$d/$$base*; do \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f $(distdir)/$$relfile || \ |
| cp -p $$file $(distdir)/$$relfile; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -f netperf.aux netperf.cp netperf.cps netperf.fn netperf.fns netperf.ky \ |
| netperf.kys netperf.log netperf.pg netperf.pgs netperf.tmp \ |
| netperf.toc netperf.tp netperf.tps netperf.vr netperf.vrs \ |
| netperf.dvi netperf.pdf netperf.ps |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| |
| man1dir = $(mandir)/man1 |
| install-man1: $(man1_MANS) $(man_MANS) |
| @$(NORMAL_INSTALL) |
| $(mkinstalldirs) $(DESTDIR)$(man1dir) |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ |
| else file=$$i; fi; \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ |
| $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ |
| done |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ |
| rm -f $(DESTDIR)$(man1dir)/$$inst; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @set fnord $$MAKEFLAGS; amf=$$2; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ETAGS = etags |
| ETAGSFLAGS = |
| |
| CTAGS = ctags |
| CTAGSFLAGS = |
| |
| tags: TAGS |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if (etags --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| else \ |
| include_option=--include; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -f $$subdir/TAGS && \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(ETAGS_ARGS)$$tags$$unique" \ |
| || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique |
| |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| |
| top_distdir = .. |
| distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkinstalldirs) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d $(distdir)/$$subdir \ |
| || mkdir $(distdir)/$$subdir \ |
| || exit 1; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" \ |
| distdir=../$(distdir)/$$subdir \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-info |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(INFO_DEPS) $(MANS) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| $(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir) |
| |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: $(DVIS) |
| |
| info: info-recursive |
| |
| info-am: $(INFO_DEPS) |
| |
| install-data-am: install-info-am install-man |
| |
| install-exec-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| $(mkinstalldirs) $(DESTDIR)$(infodir) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ |
| echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \ |
| $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \ |
| else : ; fi; \ |
| done; \ |
| done |
| @$(POST_INSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\ |
| install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\ |
| done; \ |
| else : ; fi |
| install-man: install-man1 |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-generic |
| |
| pdf: pdf-recursive |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-recursive |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-info-am uninstall-man |
| |
| uninstall-info: uninstall-info-recursive |
| |
| uninstall-man: uninstall-man1 |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ |
| clean-generic clean-recursive ctags ctags-recursive dist-info \ |
| distclean distclean-generic distclean-recursive distclean-tags \ |
| distdir dvi dvi-am dvi-recursive info info-am info-recursive \ |
| install install-am install-data install-data-am \ |
| install-data-recursive install-exec install-exec-am \ |
| install-exec-recursive install-info install-info-am \ |
| install-info-recursive install-man install-man1 \ |
| install-recursive install-strip installcheck installcheck-am \ |
| installdirs installdirs-am installdirs-recursive \ |
| maintainer-clean maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-recursive mostlyclean \ |
| mostlyclean-aminfo mostlyclean-generic mostlyclean-recursive \ |
| pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \ |
| tags-recursive uninstall uninstall-am uninstall-info-am \ |
| uninstall-info-recursive uninstall-man uninstall-man1 \ |
| uninstall-recursive |
| |
| |
| netperf.html: $(info_TEXINFOS) |
| $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) --html --no-split -I $(srcdir) \ |
| -o $@ `test -f '$<' || echo '$(srcdir)/'`$< |
| |
| netperf.txt: $(info_TEXINFOS) |
| $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) --plaintext -I $(srcdir) \ |
| -o $@ `test -f '$<' || echo '$(srcdir)/'`$< |
| |
| netperf.xml: $(info_TEXINFOS) |
| $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) --xml -I $(srcdir) \ |
| -o $@ `test -f '$<' || echo '$(srcdir)/'`$< |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
