blob: f157d983da749743b27129a4f6b3af16d5c97857 [file] [log] [blame]
# lib-link.m4 serial 13 (gettext-0.16.2)
dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl From Bruno Haible.
AC_PREREQ(2.54)
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
AC_LIB_LINKFLAGS_BODY([$1], [$2])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
AC_SUBST([LIB]NAME[_PREFIX])
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
undefine([Name])
undefine([NAME])
])
dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
dnl searches for libname and the libraries corresponding to explicit and
dnl implicit dependencies, together with the specified include files and
dnl the ability to compile and link the specified testcode. If found, it
dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
dnl accordingly.
AC_LIB_LINKFLAGS_BODY([$1], [$2])
dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
dnl because if the user has installed lib[]Name and not disabled its use
dnl via --without-lib[]Name-prefix, he wants to use it.
ac_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIB[]NAME"
AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
LIBS="$ac_save_LIBS"
])
if test "$ac_cv_lib[]Name" = yes; then
HAVE_LIB[]NAME=yes
AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
AC_MSG_CHECKING([how to link with lib[]$1])
AC_MSG_RESULT([$LIB[]NAME])
else
HAVE_LIB[]NAME=no
dnl If $LIB[]NAME didn't lead to a usable library, we don't need
dnl $INC[]NAME either.
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
LIB[]NAME[]_PREFIX=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
AC_SUBST([LIB]NAME[_PREFIX])
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
dnl acl_libext,
dnl acl_shlibext,
dnl acl_hardcode_libdir_flag_spec,
dnl acl_hardcode_libdir_separator,
dnl acl_hardcode_direct,
dnl acl_hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
. ./conftest.sh
rm -f ./conftest.sh
acl_cv_rpath=done
])
wl="$acl_cv_wl"
acl_libext="$acl_cv_libext"
acl_shlibext="$acl_cv_shlibext"
acl_libname_spec="$acl_cv_libname_spec"
acl_library_names_spec="$acl_cv_library_names_spec"
acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
acl_hardcode_direct="$acl_cv_hardcode_direct"
acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
:, enable_rpath=yes)
])
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Autoconf >= 2.61 supports dots in --with options.
define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
--without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/$acl_libdirstem"
fi
fi
])
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
LIB[]NAME[]_PREFIX=
rpathdirs=
ltrpathdirs=
names_already_handled=
names_next_round='$1 $2'
while test -n "$names_next_round"; do
names_this_round="$names_next_round"
names_next_round=
for name in $names_this_round; do
already_handled=
for n in $names_already_handled; do
if test "$n" = "$name"; then
already_handled=yes
break
fi
done
if test -z "$already_handled"; then
names_already_handled="$names_already_handled $name"
dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
dnl or AC_LIB_HAVE_LINKFLAGS call.
uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
eval value=\"\$HAVE_LIB$uppername\"
if test -n "$value"; then
if test "$value" = yes; then
eval value=\"\$LIB$uppername\"
test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
eval value=\"\$LTLIB$uppername\"
test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
else
dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
dnl that this library doesn't exist. So just drop it.
:
fi
else
dnl Search the library lib$name in $additional_libdir and $LDFLAGS
dnl and the already constructed $LIBNAME/$LTLIBNAME.
found_dir=
found_la=
found_so=
found_a=
eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
if test -n "$acl_shlibext"; then
shrext=".$acl_shlibext" # typically: shrext=.so
else
shrext=
fi
if test $use_additional = yes; then
dir="$additional_libdir"
dnl The same code as in the loop below:
dnl First look for a shared library.
if test -n "$acl_shlibext"; then
if test -f "$dir/$libname$shrext"; then
found_dir="$dir"
found_so="$dir/$libname$shrext"
else
if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
ver=`(cd "$dir" && \
for f in "$libname$shrext".*; do echo "$f"; done \
| sed -e "s,^$libname$shrext\\\\.,," \
| sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
| sed 1q ) 2>/dev/null`
if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
found_dir="$dir"
found_so="$dir/$libname$shrext.$ver"
fi
else
eval library_names=\"$acl_library_names_spec\"
for f in $library_names; do
if test -f "$dir/$f"; then
found_dir="$dir"
found_so="$dir/$f"
break
fi
done
fi
fi
fi
dnl Then look for a static library.
if test "X$found_dir" = "X"; then
if test -f "$dir/$libname.$acl_libext"; then
found_dir="$dir"
found_a="$dir/$libname.$acl_libext"
fi
fi
if test "X$found_dir" != "X"; then
if test -f "$dir/$libname.la"; then
found_la="$dir/$libname.la"
fi
fi
fi
if test "X$found_dir" = "X"; then
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
dnl First look for a shared library.
if test -n "$acl_shlibext"; then
if test -f "$dir/$libname$shrext"; then
found_dir="$dir"
found_so="$dir/$libname$shrext"
else
if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
ver=`(cd "$dir" && \
for f in "$libname$shrext".*; do echo "$f"; done \
| sed -e "s,^$libname$shrext\\\\.,," \
| sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
| sed 1q ) 2>/dev/null`
if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
found_dir="$dir"
found_so="$dir/$libname$shrext.$ver"
fi
else
eval library_names=\"$acl_library_names_spec\"
for f in $library_names; do
if test -f "$dir/$f"; then
found_dir="$dir"
found_so="$dir/$f"
break
fi
done
fi
fi
fi
dnl Then look for a static library.
if test "X$found_dir" = "X"; then
if test -f "$dir/$libname.$acl_libext"; then
found_dir="$dir"
found_a="$dir/$libname.$acl_libext"
fi
fi
if test "X$found_dir" != "X"; then
if test -f "$dir/$libname.la"; then
found_la="$dir/$libname.la"
fi
fi
;;
esac
if test "X$found_dir" != "X"; then
break
fi
done
fi
if test "X$found_dir" != "X"; then
dnl Found the library.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
dnl Linking with a shared library. We attempt to hardcode its
dnl directory into the executable's runpath, unless it's the
dnl standard /usr/lib.
if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
dnl No hardcoding is needed.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
if test "$acl_hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $found_dir"
fi
else
dnl Rely on "-L$found_dir".
dnl But don't add it if it's already contained in the LDFLAGS
dnl or the already constructed $LIBNAME
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
if test "$acl_hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
fi
fi
fi
fi
else
if test "X$found_a" != "X"; then
dnl Linking with a static library.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
else
dnl We shouldn't come here, but anyway it's good to have a
dnl fallback.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
fi
fi
dnl Assume the include files are nearby.
additional_includedir=
case "$found_dir" in
*/$acl_libdirstem | */$acl_libdirstem/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
LIB[]NAME[]_PREFIX="$basedir"
additional_includedir="$basedir/include"
;;
esac
if test "X$additional_includedir" != "X"; then
dnl Potentially add $additional_includedir to $INCNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's /usr/local/include and we are using GCC on Linux,
dnl 3. if it's already present in $CPPFLAGS or the already
dnl constructed $INCNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
for x in $CPPFLAGS $INC[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $INCNAME.
INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
fi
fi
fi
fi
fi
dnl Look for dependencies.
if test -n "$found_la"; then
dnl Read the .la file. It defines the variables
dnl dlname, library_names, old_library, dependency_libs, current,
dnl age, revision, installed, dlopen, dlpreopen, libdir.
save_libdir="$libdir"
case "$found_la" in
*/* | *\\*) . "$found_la" ;;
*) . "./$found_la" ;;
esac
libdir="$save_libdir"
dnl We use only dependency_libs.
for dep in $dependency_libs; do
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
dnl 3. if it's already present in $LDFLAGS or the already
dnl constructed $LIBNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
haveit=
if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LIBNAME.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
fi
fi
haveit=
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LTLIBNAME.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
fi
fi
fi
fi
;;
-R*)
dir=`echo "X$dep" | sed -e 's/^X-R//'`
if test "$enable_rpath" != no; then
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $dir"
fi
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $dir"
fi
fi
;;
-l*)
dnl Handle this in the next round.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
;;
*.la)
dnl Handle this in the next round. Throw away the .la's
dnl directory; it is already contained in a preceding -L
dnl option.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
;;
*)
dnl Most likely an immediate library name.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
;;
esac
done
fi
else
dnl Didn't find the library; assume it is in the system directories
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
fi
fi
fi
done
done
if test "X$rpathdirs" != "X"; then
if test -n "$acl_hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
done
dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
dnl The -rpath options are cumulative.
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
fi
fi
if test "X$ltrpathdirs" != "X"; then
dnl When using libtool, the option that works for both libraries and
dnl executables is -R. The -R options are cumulative.
for found_dir in $ltrpathdirs; do
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
done
fi
])
dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
dnl unless already present in VAR.
dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
dnl contains two or three consecutive elements that belong together.
AC_DEFUN([AC_LIB_APPENDTOVAR],
[
for element in [$2]; do
haveit=
for x in $[$1]; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X$element"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
[$1]="${[$1]}${[$1]:+ }$element"
fi
done
])
dnl For those cases where a variable contains several -L and -l options
dnl referring to unknown libraries and directories, this macro determines the
dnl necessary additional linker options for the runtime path.
dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
dnl otherwise linking without libtool is assumed.
AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
[
AC_REQUIRE([AC_LIB_RPATH])
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
$1=
if test "$enable_rpath" != no; then
if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode directories into the resulting
dnl binary.
rpathdirs=
next=
for opt in $2; do
if test -n "$next"; then
dir="$next"
dnl No need to hardcode the standard /usr/lib.
if test "X$dir" != "X/usr/$acl_libdirstem"; then
rpathdirs="$rpathdirs $dir"
fi
next=
else
case $opt in
-L) next=yes ;;
-L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
dnl No need to hardcode the standard /usr/lib.
if test "X$dir" != "X/usr/$acl_libdirstem"; then
rpathdirs="$rpathdirs $dir"
fi
next= ;;
*) next= ;;
esac
fi
done
if test "X$rpathdirs" != "X"; then
if test -n ""$3""; then
dnl libtool is used for linking. Use -R options.
for dir in $rpathdirs; do
$1="${$1}${$1:+ }-R$dir"
done
else
dnl The linker is used for linking directly.
if test -n "$acl_hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user
dnl must pass all path elements in one option.
alldirs=
for dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="$flag"
else
dnl The -rpath options are cumulative.
for dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$dir"
eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="${$1}${$1:+ }$flag"
done
fi
fi
fi
fi
fi
AC_SUBST([$1])
])