[section:binomial_dist Binomial Distribution]

``#include <boost/math/distributions/binomial.hpp>``

   namespace boost{ namespace math{ 
   
   template <class RealType = double, 
             class ``__Policy``   = ``__policy_class`` >
   class binomial_distribution;
   
   typedef binomial_distribution<> binomial;
   
   template <class RealType, class ``__Policy``>
   class binomial_distribution
   {
   public:
      typedef RealType  value_type;
      typedef Policy    policy_type;
      
      static const ``['unspecified-type]`` cloppper_pearson_exact_interval;
      static const ``['unspecified-type]`` jeffreys_prior_interval;
      
      // construct:
      binomial_distribution(RealType n, RealType p);
      
      // parameter access::
      RealType success_fraction() const;
      RealType trials() const;
      
      // Bounds on success fraction:
      static RealType find_lower_bound_on_p(
         RealType trials, 
         RealType successes,
         RealType probability,
         ``['unspecified-type]`` method = clopper_pearson_exact_interval);
      static RealType find_upper_bound_on_p(
         RealType trials, 
         RealType successes,
         RealType probability,
         ``['unspecified-type]`` method = clopper_pearson_exact_interval);
         
      // estimate min/max number of trials:
      static RealType find_minimum_number_of_trials(
         RealType k,     // number of events
         RealType p,     // success fraction
         RealType alpha); // risk level
         
      static RealType find_maximum_number_of_trials(
         RealType k,     // number of events
         RealType p,     // success fraction
         RealType alpha); // risk level
   };
   
   }} // namespaces
   
The class type `binomial_distribution` represents a
[@http://mathworld.wolfram.com/BinomialDistribution.html binomial distribution]:
it is used when there are exactly two mutually 
exclusive outcomes of a trial. These outcomes are labelled 
"success" and "failure". The
[@ binomial distribution] is used to obtain 
the probability of observing k successes in N trials, with the 
probability of success on a single trial denoted by p. The 
binomial distribution assumes that p is fixed for all trials.

[note The random variable for the binomial distribution is the number of successes,
(the number of trials is a fixed property of the distribution)
whereas for the negative binomial,
the random variable is the number of trials, for a fixed number of successes.]

The PDF for the binomial distribution is given by:

[equation binomial_ref2]

The following two graphs illustrate how the PDF changes depending
upon the distributions parameters, first we'll keep the success
fraction /p/ fixed at 0.5, and vary the sample size:

[graph binomial_pdf_1]

Alternatively, we can keep the sample size fixed at N=20 and
vary the success fraction /p/:

[graph binomial_pdf_2]

[discrete_quantile_warning Binomial]
   
[h4 Member Functions]

[h5 Construct]

   binomial_distribution(RealType n, RealType p);

Constructor: /n/ is the total number of trials, /p/ is the
probability of success of a single trial.

Requires `0 <= p <= 1`, and `n >= 0`, otherwise calls __domain_error.

[h5 Accessors]

   RealType success_fraction() const;
   
Returns the parameter /p/ from which this distribution was constructed.
   
   RealType trials() const;
   
Returns the parameter /n/ from which this distribution was constructed.

[h5 Lower Bound on the Success Fraction]

   static RealType find_lower_bound_on_p(
      RealType trials, 
      RealType successes,
      RealType alpha,
      ``['unspecified-type]`` method = clopper_pearson_exact_interval);
      
Returns a lower bound on the success fraction:

[variablelist
[[trials][The total number of trials conducted.]]
[[successes][The number of successes that occurred.]]
[[alpha][The largest acceptable probability that the true value of
         the success fraction is [*less than] the value returned.]]
[[method][An optional parameter that specifies the method to be used
         to compute the interval (See below).]]
]

For example, if you observe /k/ successes from /n/ trials the
best estimate for the success fraction is simply ['k/n], but if you
want to be 95% sure that the true value is [*greater than] some value, 
['p[sub min]], then:

   p``[sub min]`` = binomial_distribution<RealType>::find_lower_bound_on_p(
                       n, k, 0.05);

[link math_toolkit.dist.stat_tut.weg.binom_eg.binom_conf See worked example.]

There are currently two possible values available for the /method/ 
optional parameter: /clopper_pearson_exact_interval/ 
or /jeffreys_prior_interval/.  These constants are both members of 
class template `binomial_distribution`, so usage is for example:

   p = binomial_distribution<RealType>::find_lower_bound_on_p(
       n, k, 0.05, binomial_distribution<RealType>::jeffreys_prior_interval);
       
The default method if this parameter is not specified is the Clopper Pearson
"exact" interval.  This produces an interval that guarantees at least
`100(1-alpha)%` coverage, but which is known to be overly conservative,
sometimes producing intervals with much greater than the requested coverage.

The alternative calculation method produces a non-informative 
Jeffreys Prior interval.  It produces `100(1-alpha)%` coverage only
['in the average case], though is typically very close to the requested
coverage level.  It is one of the main methods of calculation recommended
in the review by Brown, Cai and DasGupta.

Please note that the "textbook" calculation method using
a normal approximation (the Wald interval) is deliberately 
not provided: it is known to produce consistently poor results, 
even when the sample size is surprisingly large.
Refer to Brown, Cai and DasGupta for a full explanation.  Many other methods
of calculation are available, and may be more appropriate for specific
situations.  Unfortunately there appears to be no consensus amongst
statisticians as to which is "best": refer to the discussion at the end of
Brown, Cai and DasGupta for examples.

The two methods provided here were chosen principally because they
can be used for both one and two sided intervals.
See also:

Lawrence D. Brown, T. Tony Cai and Anirban DasGupta (2001),
Interval Estimation for a Binomial Proportion,
Statistical Science, Vol. 16, No. 2, 101-133.

T. Tony Cai (2005),
One-sided confidence intervals in discrete distributions,
Journal of Statistical Planning and Inference 131, 63-88.

Agresti, A. and Coull, B. A. (1998). Approximate is better than
"exact" for interval estimation of binomial proportions. Amer.
Statist. 52 119-126.

Clopper, C. J. and Pearson, E. S. (1934). The use of confidence
or fiducial limits illustrated in the case of the binomial.
Biometrika 26 404-413.

[h5 Upper Bound on the Success Fraction]

   static RealType find_upper_bound_on_p(
      RealType trials, 
      RealType successes,
      RealType alpha,
      ``['unspecified-type]`` method = clopper_pearson_exact_interval);
      
Returns an upper bound on the success fraction:

[variablelist
[[trials][The total number of trials conducted.]]
[[successes][The number of successes that occurred.]]
[[alpha][The largest acceptable probability that the true value of
         the success fraction is [*greater than] the value returned.]]
[[method][An optional parameter that specifies the method to be used
         to compute the interval. Refer to the documentation for 
         `find_upper_bound_on_p` above for the meaning of the 
         method options.]]
]

For example, if you observe /k/ successes from /n/ trials the
best estimate for the success fraction is simply ['k/n], but if you
want to be 95% sure that the true value is [*less than] some value, 
['p[sub max]], then:

   p``[sub max]`` = binomial_distribution<RealType>::find_upper_bound_on_p(
                       n, k, 0.05);
                       
[link math_toolkit.dist.stat_tut.weg.binom_eg.binom_conf See worked example.]

[note
In order to obtain a two sided bound on the success fraction, you
call both `find_lower_bound_on_p` *and* `find_upper_bound_on_p`
each with the same arguments.

If the desired risk level
that the true success fraction lies outside the bounds is [alpha],
then you pass [alpha]/2 to these functions.

So for example a two sided 95% confidence interval would be obtained
by passing [alpha] = 0.025 to each of the functions.

[link math_toolkit.dist.stat_tut.weg.binom_eg.binom_conf See worked example.]
]


[h5 Estimating the Number of Trials Required for a Certain Number of Successes]

   static RealType find_minimum_number_of_trials(
      RealType k,     // number of events
      RealType p,     // success fraction
      RealType alpha); // probability threshold
      
This function estimates the minimum number of trials required to ensure that
more than k events is observed with a level of risk /alpha/ that k or 
fewer events occur.

[variablelist
[[k][The number of success observed.]]
[[p][The probability of success for each trial.]]
[[alpha][The maximum acceptable probability that k events or fewer will be observed.]]
]

For example:
   
   binomial_distribution<RealType>::find_number_of_trials(10, 0.5, 0.05);
      
Returns the smallest number of trials we must conduct to be 95% sure
of seeing 10 events that occur with frequency one half.
   
[h5 Estimating the Maximum Number of Trials to Ensure no more than a Certain Number of Successes]

   static RealType find_maximum_number_of_trials(
      RealType k,     // number of events
      RealType p,     // success fraction
      RealType alpha); // probability threshold
      
This function estimates the maximum number of trials we can conduct
to ensure that k successes or fewer are observed, with a risk /alpha/
that more than k occur.

[variablelist
[[k][The number of success observed.]]
[[p][The probability of success for each trial.]]
[[alpha][The maximum acceptable probability that more than k events will be observed.]]
]

For example:
   
   binomial_distribution<RealType>::find_maximum_number_of_trials(0, 1e-6, 0.05);
      
Returns the largest number of trials we can conduct and still be 95% certain
of not observing any events that occur with one in a million frequency.
This is typically used in failure analysis.

[link math_toolkit.dist.stat_tut.weg.binom_eg.binom_size_eg See Worked Example.]

[h4 Non-member Accessors]

All the [link math_toolkit.dist.dist_ref.nmp usual non-member accessor functions]
that are generic to all distributions are supported: __usual_accessors.

The domain for the random variable /k/ is `0 <= k <= N`, otherwise a 
__domain_error is returned.

It's worth taking a moment to define what these accessors actually mean in 
the context of this distribution:

[table Meaning of the non-member accessors
[[Function][Meaning]]
[[__pdf]
   [The probability of obtaining [*exactly k successes] from n trials
   with success fraction p.  For example:

`pdf(binomial(n, p), k)`]]
[[__cdf]
   [The probability of obtaining [*k successes or fewer] from n trials
   with success fraction p.  For example:

`cdf(binomial(n, p), k)`]]
[[__ccdf]
   [The probability of obtaining [*more than k successes] from n trials
   with success fraction p.  For example:

`cdf(complement(binomial(n, p), k))`]]
[[__quantile]
   [The [*greatest] number of successes that may be observed from n trials
   with success fraction p, at probability P.  Note that the value returned
   is a real-number, and not an integer.  Depending on the use case you may
   want to take either the floor or ceiling of the result.  For example:

`quantile(binomial(n, p), P)`]]
[[__quantile_c]
   [The [*smallest] number of successes that may be observed from n trials
   with success fraction p, at probability P.  Note that the value returned
   is a real-number, and not an integer.  Depending on the use case you may
   want to take either the floor or ceiling of the result. For example:

`quantile(complement(binomial(n, p), P))`]]
]

[h4 Examples]

Various [link math_toolkit.dist.stat_tut.weg.binom_eg worked examples] 
are available illustrating the use of the binomial distribution.

[h4 Accuracy]

This distribution is implemented using the 
incomplete beta functions __ibeta and __ibetac, 
please refer to these functions for information on accuracy.

[h4 Implementation]

In the following table /p/ is the probability that one trial will
be successful (the success fraction), /n/ is the number of trials,
/k/ is the number of successes, /p/ is the probability and /q = 1-p/.

[table
[[Function][Implementation Notes]]
[[pdf][Implementation is in terms of __ibeta_derivative: if [sub n]C[sub k ] is the binomial
       coefficient of a and b, then we have:
       
[equation binomial_ref1]

Which can be evaluated as `ibeta_derivative(k+1, n-k+1, p) / (n+1)`

The function __ibeta_derivative is used here, since it has already
       been optimised for the lowest possible error - indeed this is really
       just a thin wrapper around part of the internals of the incomplete
       beta function.
       
There are also various special cases: refer to the code for details.
       ]]
[[cdf][Using the relation: 

``
p = I[sub 1-p](n - k, k + 1)
  = 1 - I[sub p](k + 1, n - k)
  = __ibetac(k + 1, n - k, p)``

There are also various special cases: refer to the code for details.
]]
[[cdf complement][Using the relation: q = __ibeta(k + 1, n - k, p)

There are also various special cases: refer to the code for details. ]]
[[quantile][Since the cdf is non-linear in variate /k/ none of the inverse
            incomplete beta functions can be used here.  Instead the quantile
            is found numerically using a derivative free method 
            ([link math_toolkit.toolkit.internals1.roots2 TOMS Algorithm 748]).]]
[[quantile from the complement][Found numerically as above.]]
[[mean][ `p * n` ]]
[[variance][ `p * n * (1-p)` ]]
[[mode][`floor(p * (n + 1))`]]
[[skewness][`(1 - 2 * p) / sqrt(n * p * (1 - p))`]]
[[kurtosis][`3 - (6 / n) + (1 / (n * p * (1 - p)))`]]
[[kurtosis excess][`(1 - 6 * p * q) / (n * p * q)`]]
[[parameter estimation][The member functions `find_upper_bound_on_p`
       `find_lower_bound_on_p` and `find_number_of_trials` are 
       implemented in terms of the inverse incomplete beta functions
       __ibetac_inv, __ibeta_inv, and __ibetac_invb respectively]]
]

[h4 References]

* [@http://mathworld.wolfram.com/BinomialDistribution.html Weisstein, Eric W. "Binomial Distribution." From MathWorld--A Wolfram Web Resource].
* [@http://en.wikipedia.org/wiki/Beta_distribution Wikipedia binomial distribution]. 
* [@http://www.itl.nist.gov/div898/handbook/eda/section3/eda366i.htm  NIST Explorary Data Analysis]. 

[endsect][/section:binomial_dist Binomial]

[/ binomial.qbk
  Copyright 2006 John Maddock and Paul A. Bristow.
  Distributed under the Boost Software License, Version 1.0.
  (See accompanying file LICENSE_1_0.txt or copy at
  http://www.boost.org/LICENSE_1_0.txt).
]