| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| @DBUS_XML_DOCS_ENABLED_TRUE@am__append_1 = $(HTML_FILES) |
| subdir = doc |
| DIST_COMMON = $(dist_man1_MANS) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/dbus-daemon.1.in TODO |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \ |
| $(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/tp-compiler-flag.m4 \ |
| $(top_srcdir)/m4/tp-compiler-warnings.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = dbus-daemon.1 |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_GEN = $(am__v_GEN_$(V)) |
| am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) |
| am__v_GEN_0 = @echo " GEN " $@; |
| AM_V_at = $(am__v_at_$(V)) |
| am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) |
| am__v_at_0 = @ |
| SOURCES = |
| DIST_SOURCES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| man1dir = $(mandir)/man1 |
| am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(apidir)" |
| NROFF = nroff |
| MANS = $(dist_man1_MANS) $(man1_MANS) |
| DATA = $(api_DATA) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BUILD_FILEVERSION = @BUILD_FILEVERSION@ |
| BUILD_TIMESTAMP = @BUILD_TIMESTAMP@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DBUS_BINDIR = @DBUS_BINDIR@ |
| DBUS_BUS_CFLAGS = @DBUS_BUS_CFLAGS@ |
| DBUS_BUS_LIBS = @DBUS_BUS_LIBS@ |
| DBUS_CLIENT_CFLAGS = @DBUS_CLIENT_CFLAGS@ |
| DBUS_CLIENT_LIBS = @DBUS_CLIENT_LIBS@ |
| DBUS_CONSOLE_AUTH_DIR = @DBUS_CONSOLE_AUTH_DIR@ |
| DBUS_CONSOLE_OWNER_FILE = @DBUS_CONSOLE_OWNER_FILE@ |
| DBUS_DAEMONDIR = @DBUS_DAEMONDIR@ |
| DBUS_DATADIR = @DBUS_DATADIR@ |
| DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@ |
| DBUS_INT16_TYPE = @DBUS_INT16_TYPE@ |
| DBUS_INT32_TYPE = @DBUS_INT32_TYPE@ |
| DBUS_INT64_CONSTANT = @DBUS_INT64_CONSTANT@ |
| DBUS_INT64_TYPE = @DBUS_INT64_TYPE@ |
| DBUS_LAUNCHER_CFLAGS = @DBUS_LAUNCHER_CFLAGS@ |
| DBUS_LAUNCHER_LIBS = @DBUS_LAUNCHER_LIBS@ |
| DBUS_LIBEXECDIR = @DBUS_LIBEXECDIR@ |
| DBUS_MAJOR_VERSION = @DBUS_MAJOR_VERSION@ |
| DBUS_MICRO_VERSION = @DBUS_MICRO_VERSION@ |
| DBUS_MINOR_VERSION = @DBUS_MINOR_VERSION@ |
| DBUS_PATH_OR_ABSTRACT = @DBUS_PATH_OR_ABSTRACT@ |
| DBUS_PREFIX = @DBUS_PREFIX@ |
| DBUS_SESSION_BUS_DEFAULT_ADDRESS = @DBUS_SESSION_BUS_DEFAULT_ADDRESS@ |
| DBUS_SESSION_SOCKET_DIR = @DBUS_SESSION_SOCKET_DIR@ |
| DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = @DBUS_SYSTEM_BUS_DEFAULT_ADDRESS@ |
| DBUS_SYSTEM_PID_FILE = @DBUS_SYSTEM_PID_FILE@ |
| DBUS_SYSTEM_SOCKET = @DBUS_SYSTEM_SOCKET@ |
| DBUS_TEST_CFLAGS = @DBUS_TEST_CFLAGS@ |
| DBUS_TEST_LIBS = @DBUS_TEST_LIBS@ |
| DBUS_UINT64_CONSTANT = @DBUS_UINT64_CONSTANT@ |
| DBUS_USER = @DBUS_USER@ |
| DBUS_VERSION = @DBUS_VERSION@ |
| DBUS_X_CFLAGS = @DBUS_X_CFLAGS@ |
| DBUS_X_LIBS = @DBUS_X_LIBS@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DOXYGEN = @DOXYGEN@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| EXPANDED_BINDIR = @EXPANDED_BINDIR@ |
| EXPANDED_DATADIR = @EXPANDED_DATADIR@ |
| EXPANDED_LIBDIR = @EXPANDED_LIBDIR@ |
| EXPANDED_LIBEXECDIR = @EXPANDED_LIBEXECDIR@ |
| EXPANDED_LOCALSTATEDIR = @EXPANDED_LOCALSTATEDIR@ |
| EXPANDED_PREFIX = @EXPANDED_PREFIX@ |
| EXPANDED_SYSCONFDIR = @EXPANDED_SYSCONFDIR@ |
| FGREP = @FGREP@ |
| GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LAUNCHCTL = @LAUNCHCTL@ |
| LAUNCHD_AGENT_DIR = @LAUNCHD_AGENT_DIR@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBXML_CFLAGS = @LIBXML_CFLAGS@ |
| LIBXML_LIBS = @LIBXML_LIBS@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LT_AGE = @LT_AGE@ |
| LT_CURRENT = @LT_CURRENT@ |
| LT_REVISION = @LT_REVISION@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MAN2HTML = @MAN2HTML@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| RANLIB = @RANLIB@ |
| RC = @RC@ |
| R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@ |
| SECTION_LDFLAGS = @SECTION_LDFLAGS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| TEST_BUS_BINARY = @TEST_BUS_BINARY@ |
| TEST_EXIT_BINARY = @TEST_EXIT_BINARY@ |
| TEST_INVALID_SERVICE_DIR = @TEST_INVALID_SERVICE_DIR@ |
| TEST_INVALID_SERVICE_SYSTEM_DIR = @TEST_INVALID_SERVICE_SYSTEM_DIR@ |
| TEST_LAUNCH_HELPER_BINARY = @TEST_LAUNCH_HELPER_BINARY@ |
| TEST_PRIVSERVER_BINARY = @TEST_PRIVSERVER_BINARY@ |
| TEST_SEGFAULT_BINARY = @TEST_SEGFAULT_BINARY@ |
| TEST_SERVICE_BINARY = @TEST_SERVICE_BINARY@ |
| TEST_SHELL_SERVICE_BINARY = @TEST_SHELL_SERVICE_BINARY@ |
| TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@ |
| TEST_SOCKET_DIR = @TEST_SOCKET_DIR@ |
| TEST_VALID_SERVICE_DIR = @TEST_VALID_SERVICE_DIR@ |
| TEST_VALID_SERVICE_SYSTEM_DIR = @TEST_VALID_SERVICE_SYSTEM_DIR@ |
| VERSION = @VERSION@ |
| WINDRES = @WINDRES@ |
| XMKMF = @XMKMF@ |
| XMLTO = @XMLTO@ |
| XSLTPROC = @XSLTPROC@ |
| X_CFLAGS = @X_CFLAGS@ |
| X_EXTRA_LIBS = @X_EXTRA_LIBS@ |
| X_LIBS = @X_LIBS@ |
| X_PRE_LIBS = @X_PRE_LIBS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| systemdsystemunitdir = @systemdsystemunitdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| apidir = @htmldir@/api |
| |
| # automake normally assumes that man pages are generated files; |
| # these ones aren't, so we need the dist_ prefix to say that they're |
| # their own source code |
| dist_man1_MANS = \ |
| dbus-cleanup-sockets.1 \ |
| dbus-launch.1 \ |
| dbus-monitor.1 \ |
| dbus-send.1 \ |
| dbus-uuidgen.1 |
| |
| |
| # on the other hand, this one is generated |
| man1_MANS = \ |
| dbus-daemon.1 |
| |
| MAN_IN_FILES = dbus-daemon.1.in |
| MAN_HTML_FILES = \ |
| dbus-cleanup-sockets.1.html \ |
| dbus-daemon.1.html \ |
| dbus-launch.1.html \ |
| dbus-monitor.1.html \ |
| dbus-send.1.html \ |
| dbus-uuidgen.1.html |
| |
| DTDS = \ |
| busconfig.dtd \ |
| introspect.dtd |
| |
| STATIC_DOCS = \ |
| diagram.png \ |
| diagram.svg \ |
| dbus-faq.xml \ |
| dbus-specification.xml \ |
| dbus-test-plan.xml \ |
| dbus-tutorial.xml \ |
| dcop-howto.txt \ |
| introspect.xsl \ |
| system-activation.txt \ |
| $(DTDS) |
| |
| EXTRA_DIST = file-boilerplate.c doxygen_to_devhelp.xsl $(STATIC_DOCS) \ |
| $(MAN_IN_FILES) $(am__append_1) |
| HTML_FILES = \ |
| dbus-faq.html \ |
| dbus-specification.html \ |
| dbus-test-plan.html \ |
| dbus-tutorial.html |
| |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@api_DATA = dbus.devhelp |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@BONUS_FILES = \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/README \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/HACKING \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/AUTHORS \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/NEWS \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/COPYING \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(top_srcdir)/ChangeLog |
| |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@DOC_SERVER = dbus.freedesktop.org |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@DOC_WWW_DIR = /srv/dbus.freedesktop.org/www |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@SPECIFICATION_SERVER = specifications.freedesktop.org |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@SPECIFICATION_PATH = /srv/specifications.freedesktop.org/www/dbus/1.0 |
| all: all-am |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| dbus-daemon.1: $(top_builddir)/config.status $(srcdir)/dbus-daemon.1.in |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| install-man1: $(dist_man1_MANS) $(man1_MANS) |
| @$(NORMAL_INSTALL) |
| test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" |
| @list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ |
| { for i in $$list; do echo "$$i"; done; \ |
| } | while read p; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; echo "$$p"; \ |
| done | \ |
| sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ |
| sed 'N;N;s,\n, ,g' | { \ |
| list=; while read file base inst; do \ |
| if test "$$base" = "$$inst"; then list="$$list $$file"; else \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ |
| fi; \ |
| done; \ |
| for i in $$list; do echo "$$i"; done | $(am__base_list) | \ |
| while read files; do \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ |
| done; } |
| |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ |
| files=`{ for i in $$list; do echo "$$i"; done; \ |
| } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ |
| test -z "$$files" || { \ |
| echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } |
| install-apiDATA: $(api_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(apidir)" || $(MKDIR_P) "$(DESTDIR)$(apidir)" |
| @list='$(api_DATA)'; test -n "$(apidir)" || list=; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(apidir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(apidir)" || exit $$?; \ |
| done |
| |
| uninstall-apiDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(api_DATA)'; test -n "$(apidir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$files" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(apidir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(apidir)" && rm -f $$files |
| tags: TAGS |
| TAGS: |
| |
| ctags: CTAGS |
| CTAGS: |
| |
| |
| distdir: $(DISTFILES) |
| @list='$(MANS)'; if test -n "$$list"; then \ |
| list=`for p in $$list; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ |
| if test -n "$$list" && \ |
| grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ |
| echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ |
| grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ |
| echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ |
| echo " typically \`make maintainer-clean' will remove them" >&2; \ |
| exit 1; \ |
| else :; fi; \ |
| else :; fi |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-am |
| @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@@DBUS_HAVE_MAN2HTML_FALSE@@DBUS_XML_DOCS_ENABLED_FALSE@all-local: |
| all-am: Makefile $(MANS) $(DATA) all-local |
| installdirs: |
| for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(apidir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@uninstall-local: |
| @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@install-data-local: |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-apiDATA install-data-local install-man |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: install-man1 |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic \ |
| maintainer-clean-local |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-apiDATA uninstall-local uninstall-man |
| |
| uninstall-man: uninstall-man1 |
| |
| .MAKE: install-am install-strip |
| |
| .PHONY: all all-am all-local check check-am clean clean-generic \ |
| clean-libtool clean-local distclean distclean-generic \ |
| distclean-libtool distdir dvi dvi-am html html-am info info-am \ |
| install install-am install-apiDATA install-data \ |
| install-data-am install-data-local install-dvi install-dvi-am \ |
| install-exec install-exec-am install-html install-html-am \ |
| install-info install-info-am install-man install-man1 \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-local mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ |
| uninstall-apiDATA uninstall-local uninstall-man uninstall-man1 |
| |
| |
| @DBUS_XML_DOCS_ENABLED_TRUE@all-local:: $(HTML_FILES) |
| |
| @DBUS_XML_DOCS_ENABLED_TRUE@dbus-specification.html: dbus-specification.xml |
| @DBUS_XML_DOCS_ENABLED_TRUE@ $(XMLTO) html-nochunks $< |
| |
| @DBUS_XML_DOCS_ENABLED_TRUE@dbus-test-plan.html: dbus-test-plan.xml |
| @DBUS_XML_DOCS_ENABLED_TRUE@ $(XMLTO) html-nochunks $< |
| |
| @DBUS_XML_DOCS_ENABLED_TRUE@dbus-tutorial.html: dbus-tutorial.xml |
| @DBUS_XML_DOCS_ENABLED_TRUE@ $(XMLTO) html-nochunks $< |
| |
| @DBUS_XML_DOCS_ENABLED_TRUE@dbus-faq.html: dbus-faq.xml |
| @DBUS_XML_DOCS_ENABLED_TRUE@ $(XMLTO) html-nochunks $< |
| |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@all-local:: doxygen.stamp |
| |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@doxygen.stamp: $(wildcard $(top_srcdir)/dbus/*.[ch]) |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ $(AM_V_GEN)cd $(top_builddir) && doxygen Doxyfile |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ @touch $@ |
| |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@dbus.devhelp: $(srcdir)/doxygen_to_devhelp.xsl doxygen.stamp |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@ $(XSLTPROC) -o $@ $< api/xml/index.xml |
| |
| # this assumes CREATE_SUBDIRS isn't set to YES in Doxyfile |
| # (which it isn't currently) |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@install-data-local:: doxygen.stamp |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ $(MKDIR_P) $(DESTDIR)$(apidir) |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ $(INSTALL_DATA) api/html/* $(DESTDIR)$(apidir) |
| |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@uninstall-local:: |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ rm -f $(DESTDIR)$(apidir)/*.html |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ rm -f $(DESTDIR)$(apidir)/*.png |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ rm -f $(DESTDIR)$(apidir)/*.css |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ rmdir --ignore-fail-on-non-empty $(DESTDIR)$(apidir) || \ |
| @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@ rmdir $(DESTDIR)$(apidir) |
| |
| @DBUS_HAVE_MAN2HTML_TRUE@all-local:: $(MAN_HTML_FILES) |
| |
| @DBUS_HAVE_MAN2HTML_TRUE@%.1.html: %.1 |
| @DBUS_HAVE_MAN2HTML_TRUE@ $(AM_V_GEN)( $(MAN2HTML) $< > $@.tmp && mv $@.tmp $@ ) |
| |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@dbus-docs: $(STATIC_DOCS) $(HTML_FILES) $(MAN_HTML_FILES) $(BONUS_FILES) doxygen.stamp |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)rm -rf $@ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_GEN)$(MKDIR_P) $@/api |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)cp $(STATIC_DOCS) $@ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)cp $(HTML_FILES) $@ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)cp $(MAN_HTML_FILES) $@ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)cp $(BONUS_FILES) $@ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_at)cp -r api/html $@/api |
| |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@dbus-docs.tar.gz: dbus-docs |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ $(AM_V_GEN)tar czf $@ $< |
| |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@maintainer-upload-docs: dbus-docs.tar.gz dbus-docs |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ scp dbus-docs.tar.gz $(DOC_SERVER):$(DOC_WWW_DIR) |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ rsync -rpvzP --chmod=Dg+s,ug+rwX,o=rX \ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ dbus-docs/ $(DOC_SERVER):$(DOC_WWW_DIR)/doc/ |
| @DBUS_CAN_UPLOAD_DOCS_TRUE@ scp -p $(DTDS) $(SPECIFICATION_SERVER):$(SPECIFICATION_PATH) |
| @DBUS_CAN_UPLOAD_DOCS_FALSE@maintainer-upload-docs: |
| @DBUS_CAN_UPLOAD_DOCS_FALSE@ @echo "Can't upload documentation! Re-run configure with" |
| @DBUS_CAN_UPLOAD_DOCS_FALSE@ @echo " --enable-doxygen-docs --enable-xml-docs" |
| @DBUS_CAN_UPLOAD_DOCS_FALSE@ @echo "and ensure that man2html is installed." |
| @DBUS_CAN_UPLOAD_DOCS_FALSE@ @false |
| |
| clean-local: |
| rm -rf api |
| rm -rf dbus-docs |
| rm -f *.1.html |
| rm -f doxygen.stamp |
| |
| maintainer-clean-local: |
| rm -f $(HTML_FILES) |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
