/* Definitions for data structures and routines for the regular
   expression library.
   Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005,2006
   Free Software Foundation, Inc.
   This file is part of the GNU C Library.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License along
   with this program; if not, write to the Free Software Foundation,
   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */

#ifndef _REGEX_H
#define _REGEX_H 1

#include <sys/types.h>

/* Allow the use in C++ code.  */
#ifdef __cplusplus
extern "C" {
#endif

/* Define __USE_GNU_REGEX to declare GNU extensions that violate the
   POSIX name space rules.  */
#undef __USE_GNU_REGEX
#if (defined _GNU_SOURCE					\
     || (!defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE	\
	 && !defined _XOPEN_SOURCE))
# define __USE_GNU_REGEX 1
#endif

#ifdef _REGEX_LARGE_OFFSETS

/* Use types and values that are wide enough to represent signed and
   unsigned byte offsets in memory.  This currently works only when
   the regex code is used outside of the GNU C library; it is not yet
   supported within glibc itself, and glibc users should not define
   _REGEX_LARGE_OFFSETS.  */

/* The type of the offset of a byte within a string.
   For historical reasons POSIX 1003.1-2004 requires that regoff_t be
   at least as wide as off_t.  However, many common POSIX platforms set
   regoff_t to the more-sensible ssize_t and the Open Group has
   signalled its intention to change the requirement to be that
   regoff_t be at least as wide as ptrdiff_t and ssize_t; see XBD ERN
   60 (2005-08-25).  We don't know of any hosts where ssize_t or
   ptrdiff_t is wider than ssize_t, so ssize_t is safe.  */
typedef ssize_t regoff_t;

/* The type of nonnegative object indexes.  Traditionally, GNU regex
   uses 'int' for these.  Code that uses __re_idx_t should work
   regardless of whether the type is signed.  */
typedef size_t __re_idx_t;

/* The type of object sizes.  */
typedef size_t __re_size_t;

/* The type of object sizes, in places where the traditional code
   uses unsigned long int.  */
typedef size_t __re_long_size_t;

#else

/* Use types that are binary-compatible with the traditional GNU regex
   implementation, which mishandles strings longer than INT_MAX.  */

typedef int regoff_t;
typedef int __re_idx_t;
typedef unsigned int __re_size_t;
typedef unsigned long int __re_long_size_t;

#endif

/* The following two types have to be signed and unsigned integer type
   wide enough to hold a value of a pointer.  For most ANSI compilers
   ptrdiff_t and size_t should be likely OK.  Still size of these two
   types is 2 for Microsoft C.  Ugh... */
typedef long int s_reg_t;
typedef unsigned long int active_reg_t;

/* The following bits are used to determine the regexp syntax we
   recognize.  The set/not-set meanings are chosen so that Emacs syntax
   remains the value 0.  The bits are given in alphabetical order, and
   the definitions shifted by one from the previous bit; thus, when we
   add or remove a bit, only one other definition need change.  */
typedef unsigned long int reg_syntax_t;

#ifdef __USE_GNU_REGEX

/* If this bit is not set, then \ inside a bracket expression is literal.
   If set, then such a \ quotes the following character.  */
# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)

/* If this bit is not set, then + and ? are operators, and \+ and \? are
     literals.
   If set, then \+ and \? are operators and + and ? are literals.  */
# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)

/* If this bit is set, then character classes are supported.  They are:
     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
   If not set, then character classes are not supported.  */
# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)

/* If this bit is set, then ^ and $ are always anchors (outside bracket
     expressions, of course).
   If this bit is not set, then it depends:
        ^  is an anchor if it is at the beginning of a regular
           expression or after an open-group or an alternation operator;
        $  is an anchor if it is at the end of a regular expression, or
           before a close-group or an alternation operator.

   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
   POSIX draft 11.2 says that * etc. in leading positions is undefined.
   We already implemented a previous draft which made those constructs
   invalid, though, so we haven't changed the code back.  */
# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)

/* If this bit is set, then special characters are always special
     regardless of where they are in the pattern.
   If this bit is not set, then special characters are special only in
     some contexts; otherwise they are ordinary.  Specifically,
     * + ? and intervals are only special when not after the beginning,
     open-group, or alternation operator.  */
# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)

/* If this bit is set, then *, +, ?, and { cannot be first in an re or
     immediately after an alternation or begin-group operator.  */
# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)

/* If this bit is set, then . matches newline.
   If not set, then it doesn't.  */
# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)

/* If this bit is set, then . doesn't match NUL.
   If not set, then it does.  */
# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)

/* If this bit is set, nonmatching lists [^...] do not match newline.
   If not set, they do.  */
# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)

/* If this bit is set, either \{...\} or {...} defines an
     interval, depending on RE_NO_BK_BRACES.
   If not set, \{, \}, {, and } are literals.  */
# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)

/* If this bit is set, +, ? and | aren't recognized as operators.
   If not set, they are.  */
# define RE_LIMITED_OPS (RE_INTERVALS << 1)

/* If this bit is set, newline is an alternation operator.
   If not set, newline is literal.  */
# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)

/* If this bit is set, then `{...}' defines an interval, and \{ and \}
     are literals.
  If not set, then `\{...\}' defines an interval.  */
# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)

/* If this bit is set, (...) defines a group, and \( and \) are literals.
   If not set, \(...\) defines a group, and ( and ) are literals.  */
# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)

/* If this bit is set, then \<digit> matches <digit>.
   If not set, then \<digit> is a back-reference.  */
# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)

/* If this bit is set, then | is an alternation operator, and \| is literal.
   If not set, then \| is an alternation operator, and | is literal.  */
# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)

/* If this bit is set, then an ending range point collating higher
     than the starting range point, as in [z-a], is invalid.
   If not set, then when ending range point collates higher than the
     starting range point, the range is ignored.  */
# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)

/* If this bit is set, then an unmatched ) is ordinary.
   If not set, then an unmatched ) is invalid.  */
# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)

/* If this bit is set, succeed as soon as we match the whole pattern,
   without further backtracking.  */
# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)

/* If this bit is set, do not process the GNU regex operators.
   If not set, then the GNU regex operators are recognized. */
# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)

/* If this bit is set, turn on internal regex debugging.
   If not set, and debugging was on, turn it off.
   This only works if regex.c is compiled -DDEBUG.
   We define this bit always, so that all that's needed to turn on
   debugging is to recompile regex.c; the calling code can always have
   this bit set, and it won't affect anything in the normal case. */
# define RE_DEBUG (RE_NO_GNU_OPS << 1)

/* If this bit is set, a syntactically invalid interval is treated as
   a string of ordinary characters.  For example, the ERE 'a{1' is
   treated as 'a\{1'.  */
# define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)

/* If this bit is set, then ignore case when matching.
   If not set, then case is significant.  */
# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)

/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
   for ^, because it is difficult to scan the regex backwards to find
   whether ^ should be special.  */
# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)

/* If this bit is set, then \{ cannot be first in an bre or
   immediately after an alternation or begin-group operator.  */
# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)

/* If this bit is set, then no_sub will be set to 1 during
   re_compile_pattern.  */
# define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)

#endif /* defined __USE_GNU_REGEX */

/* This global variable defines the particular regexp syntax to use (for
   some interfaces).  When a regexp is compiled, the syntax used is
   stored in the pattern buffer, so changing this does not affect
   already-compiled regexps.  */
extern reg_syntax_t re_syntax_options;

#ifdef __USE_GNU_REGEX
/* Define combinations of the above bits for the standard possibilities.
   (The [[[ comments delimit what gets put into the Texinfo file, so
   don't delete them!)  */
/* [[[begin syntaxes]]] */
# define RE_SYNTAX_EMACS 0

# define RE_SYNTAX_AWK							\
  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL			\
   | RE_NO_BK_PARENS              | RE_NO_BK_REFS			\
   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES			\
   | RE_DOT_NEWLINE		  | RE_CONTEXT_INDEP_ANCHORS		\
   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)

# define RE_SYNTAX_GNU_AWK						\
  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG)	\
   & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS		\
       | RE_CONTEXT_INVALID_OPS ))

# define RE_SYNTAX_POSIX_AWK						\
  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS		\
   | RE_INTERVALS	    | RE_NO_GNU_OPS)

# define RE_SYNTAX_GREP							\
  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES				\
   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS				\
   | RE_NEWLINE_ALT)

# define RE_SYNTAX_EGREP						\
  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS			\
   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE			\
   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS				\
   | RE_NO_BK_VBAR)

# define RE_SYNTAX_POSIX_EGREP						\
  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES			\
   | RE_INVALID_INTERVAL_ORD)

/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
# define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC

# define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC

/* Syntax bits common to both basic and extended POSIX regex syntax.  */
# define _RE_SYNTAX_POSIX_COMMON					\
  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL		\
   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)

# define RE_SYNTAX_POSIX_BASIC						\
  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP)

/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
   isn't minimal, since other operators, such as \`, aren't disabled.  */
# define RE_SYNTAX_POSIX_MINIMAL_BASIC					\
  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)

# define RE_SYNTAX_POSIX_EXTENDED					\
  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
   | RE_CONTEXT_INDEP_OPS   | RE_NO_BK_BRACES				\
   | RE_NO_BK_PARENS        | RE_NO_BK_VBAR				\
   | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)

/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
   removed and RE_NO_BK_REFS is added.  */
# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED				\
  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES				\
   | RE_NO_BK_PARENS        | RE_NO_BK_REFS				\
   | RE_NO_BK_VBAR	    | RE_UNMATCHED_RIGHT_PAREN_ORD)
/* [[[end syntaxes]]] */

#endif /* defined __USE_GNU_REGEX */

#ifdef __USE_GNU_REGEX

/* Maximum number of duplicates an interval can allow.  POSIX-conforming
   systems might define this in <limits.h>, but we want our
   value, so remove any previous define.  */
# ifdef RE_DUP_MAX
#  undef RE_DUP_MAX
# endif

/* RE_DUP_MAX is 2**15 - 1 because an earlier implementation stored
   the counter as a 2-byte signed integer.  This is no longer true, so
   RE_DUP_MAX could be increased to (INT_MAX / 10 - 1), or to
   ((SIZE_MAX - 2) / 10 - 1) if _REGEX_LARGE_OFFSETS is defined.
   However, there would be a huge performance problem if someone
   actually used a pattern like a\{214748363\}, so RE_DUP_MAX retains
   its historical value.  */
# define RE_DUP_MAX (0x7fff)

#endif /* defined __USE_GNU_REGEX */


/* POSIX `cflags' bits (i.e., information for `regcomp').  */

/* If this bit is set, then use extended regular expression syntax.
   If not set, then use basic regular expression syntax.  */
#define REG_EXTENDED 1

/* If this bit is set, then ignore case when matching.
   If not set, then case is significant.  */
#define REG_ICASE (1 << 1)

/* If this bit is set, then anchors do not match at newline
     characters in the string.
   If not set, then anchors do match at newlines.  */
#define REG_NEWLINE (1 << 2)

/* If this bit is set, then report only success or fail in regexec.
   If not set, then returns differ between not matching and errors.  */
#define REG_NOSUB (1 << 3)


/* POSIX `eflags' bits (i.e., information for regexec).  */

/* If this bit is set, then the beginning-of-line operator doesn't match
     the beginning of the string (presumably because it's not the
     beginning of a line).
   If not set, then the beginning-of-line operator does match the
     beginning of the string.  */
#define REG_NOTBOL 1

/* Like REG_NOTBOL, except for the end-of-line.  */
#define REG_NOTEOL (1 << 1)

/* Use PMATCH[0] to delimit the start and end of the search in the
   buffer.  */
#define REG_STARTEND (1 << 2)


/* If any error codes are removed, changed, or added, update the
   `__re_error_msgid' table in regcomp.c.  */

typedef enum
{
  _REG_ENOSYS = -1,	/* This will never happen for this implementation.  */
  _REG_NOERROR = 0,	/* Success.  */
  _REG_NOMATCH,		/* Didn't find a match (for regexec).  */

  /* POSIX regcomp return error codes.  (In the order listed in the
     standard.)  */
  _REG_BADPAT,		/* Invalid pattern.  */
  _REG_ECOLLATE,	/* Invalid collating element.  */
  _REG_ECTYPE,		/* Invalid character class name.  */
  _REG_EESCAPE,		/* Trailing backslash.  */
  _REG_ESUBREG,		/* Invalid back reference.  */
  _REG_EBRACK,		/* Unmatched left bracket.  */
  _REG_EPAREN,		/* Parenthesis imbalance.  */
  _REG_EBRACE,		/* Unmatched \{.  */
  _REG_BADBR,		/* Invalid contents of \{\}.  */
  _REG_ERANGE,		/* Invalid range end.  */
  _REG_ESPACE,		/* Ran out of memory.  */
  _REG_BADRPT,		/* No preceding re for repetition op.  */

  /* Error codes we've added.  */
  _REG_EEND,		/* Premature end.  */
  _REG_ESIZE,		/* Compiled pattern bigger than 2^16 bytes.  */
  _REG_ERPAREN		/* Unmatched ) or \); not returned from regcomp.  */
} reg_errcode_t;

#ifdef _XOPEN_SOURCE
# define REG_ENOSYS	_REG_ENOSYS
#endif
#define REG_NOERROR	_REG_NOERROR
#define REG_NOMATCH	_REG_NOMATCH
#define REG_BADPAT	_REG_BADPAT
#define REG_ECOLLATE	_REG_ECOLLATE
#define REG_ECTYPE	_REG_ECTYPE
#define REG_EESCAPE	_REG_EESCAPE
#define REG_ESUBREG	_REG_ESUBREG
#define REG_EBRACK	_REG_EBRACK
#define REG_EPAREN	_REG_EPAREN
#define REG_EBRACE	_REG_EBRACE
#define REG_BADBR	_REG_BADBR
#define REG_ERANGE	_REG_ERANGE
#define REG_ESPACE	_REG_ESPACE
#define REG_BADRPT	_REG_BADRPT
#define REG_EEND	_REG_EEND
#define REG_ESIZE	_REG_ESIZE
#define REG_ERPAREN	_REG_ERPAREN

/* struct re_pattern_buffer normally uses member names like `buffer'
   that POSIX does not allow.  In POSIX mode these members have names
   with leading `re_' (e.g., `re_buffer').  */
#ifdef __USE_GNU_REGEX
# define _REG_RE_NAME(id) id
# define _REG_RM_NAME(id) id
#else
# define _REG_RE_NAME(id) re_##id
# define _REG_RM_NAME(id) rm_##id
#endif

/* The user can specify the type of the re_translate member by
   defining the macro RE_TRANSLATE_TYPE, which defaults to unsigned
   char *.  This pollutes the POSIX name space, so in POSIX mode just
   use unsigned char *.  */
#ifdef __USE_GNU_REGEX
# ifndef RE_TRANSLATE_TYPE
#  define RE_TRANSLATE_TYPE unsigned char *
# endif
# define REG_TRANSLATE_TYPE RE_TRANSLATE_TYPE
#else
# define REG_TRANSLATE_TYPE unsigned char *
#endif

/* This data structure represents a compiled pattern.  Before calling
   the pattern compiler, the fields `buffer', `allocated', `fastmap',
   `translate', and `no_sub' can be set.  After the pattern has been
   compiled, the `re_nsub' field is available.  All other fields are
   private to the regex routines.  */

struct re_pattern_buffer
{
  /* Space that holds the compiled pattern.  It is declared as
     `unsigned char *' because its elements are sometimes used as
     array indexes.  */
  unsigned char *_REG_RE_NAME (buffer);

  /* Number of bytes to which `buffer' points.  */
  __re_long_size_t _REG_RE_NAME (allocated);

  /* Number of bytes actually used in `buffer'.  */
  __re_long_size_t _REG_RE_NAME (used);

  /* Syntax setting with which the pattern was compiled.  */
  reg_syntax_t _REG_RE_NAME (syntax);

  /* Pointer to a fastmap, if any, otherwise zero.  re_search uses the
     fastmap, if there is one, to skip over impossible starting points
     for matches.  */
  char *_REG_RE_NAME (fastmap);

  /* Either a translate table to apply to all characters before
     comparing them, or zero for no translation.  The translation is
     applied to a pattern when it is compiled and to a string when it
     is matched.  */
  REG_TRANSLATE_TYPE _REG_RE_NAME (translate);

  /* Number of subexpressions found by the compiler.  */
  size_t re_nsub;

  /* Zero if this pattern cannot match the empty string, one else.
     Well, in truth it's used only in `re_search_2', to see whether or
     not we should use the fastmap, so we don't set this absolutely
     perfectly; see `re_compile_fastmap' (the `duplicate' case).  */
  unsigned int _REG_RE_NAME (can_be_null) : 1;

  /* If REGS_UNALLOCATED, allocate space in the `regs' structure
     for `max (RE_NREGS, re_nsub + 1)' groups.
     If REGS_REALLOCATE, reallocate space if necessary.
     If REGS_FIXED, use what's there.  */
#ifdef __USE_GNU_REGEX
# define REGS_UNALLOCATED 0
# define REGS_REALLOCATE 1
# define REGS_FIXED 2
#endif
  unsigned int _REG_RE_NAME (regs_allocated) : 2;

  /* Set to zero when `regex_compile' compiles a pattern; set to one
     by `re_compile_fastmap' if it updates the fastmap.  */
  unsigned int _REG_RE_NAME (fastmap_accurate) : 1;

  /* If set, `re_match_2' does not return information about
     subexpressions.  */
  unsigned int _REG_RE_NAME (no_sub) : 1;

  /* If set, a beginning-of-line anchor doesn't match at the beginning
     of the string.  */
  unsigned int _REG_RE_NAME (not_bol) : 1;

  /* Similarly for an end-of-line anchor.  */
  unsigned int _REG_RE_NAME (not_eol) : 1;

  /* If true, an anchor at a newline matches.  */
  unsigned int _REG_RE_NAME (newline_anchor) : 1;

/* [[[end pattern_buffer]]] */
};

typedef struct re_pattern_buffer regex_t;

/* This is the structure we store register match data in.  See
   regex.texinfo for a full description of what registers match.  */
struct re_registers
{
  __re_size_t _REG_RM_NAME (num_regs);
  regoff_t *_REG_RM_NAME (start);
  regoff_t *_REG_RM_NAME (end);
};


/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
   `re_match_2' returns information about at least this many registers
   the first time a `regs' structure is passed.  */
#if !defined RE_NREGS && defined __USE_GNU_REGEX
# define RE_NREGS 30
#endif


/* POSIX specification for registers.  Aside from the different names than
   `re_registers', POSIX uses an array of structures, instead of a
   structure of arrays.  */
typedef struct
{
  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
} regmatch_t;

/* Declarations for routines.  */

/* Sets the current default syntax to SYNTAX, and return the old syntax.
   You can also simply assign to the `re_syntax_options' variable.  */
extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);

/* Compile the regular expression PATTERN, with length LENGTH
   and syntax given by the global `re_syntax_options', into the buffer
   BUFFER.  Return NULL if successful, and an error string if not.  */
extern const char *re_compile_pattern (const char *__pattern, size_t __length,
				       struct re_pattern_buffer *__buffer);


/* Compile a fastmap for the compiled pattern in BUFFER; used to
   accelerate searches.  Return 0 if successful and -2 if was an
   internal error.  */
extern int re_compile_fastmap (struct re_pattern_buffer *__buffer);


/* Search in the string STRING (with length LENGTH) for the pattern
   compiled into BUFFER.  Start searching at position START, for RANGE
   characters.  Return the starting position of the match, -1 for no
   match, or -2 for an internal error.  Also return register
   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
extern regoff_t re_search (struct re_pattern_buffer *__buffer,
			   const char *__string, __re_idx_t __length,
			   __re_idx_t __start, regoff_t __range,
			   struct re_registers *__regs);


/* Like `re_search', but search in the concatenation of STRING1 and
   STRING2.  Also, stop searching at index START + STOP.  */
extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer,
			     const char *__string1, __re_idx_t __length1,
			     const char *__string2, __re_idx_t __length2,
			     __re_idx_t __start, regoff_t __range,
			     struct re_registers *__regs,
			     __re_idx_t __stop);


/* Like `re_search', but return how many characters in STRING the regexp
   in BUFFER matched, starting at position START.  */
extern regoff_t re_match (struct re_pattern_buffer *__buffer,
			  const char *__string, __re_idx_t __length,
			  __re_idx_t __start, struct re_registers *__regs);


/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer,
			    const char *__string1, __re_idx_t __length1,
			    const char *__string2, __re_idx_t __length2,
			    __re_idx_t __start, struct re_registers *__regs,
			    __re_idx_t __stop);


/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
   for recording register information.  STARTS and ENDS must be
   allocated with malloc, and must each be at least `NUM_REGS * sizeof
   (regoff_t)' bytes long.

   If NUM_REGS == 0, then subsequent matches should allocate their own
   register data.

   Unless this function is called, the first search or match using
   PATTERN_BUFFER will allocate its own register data, without
   freeing the old data.  */
extern void re_set_registers (struct re_pattern_buffer *__buffer,
			      struct re_registers *__regs,
			      __re_size_t __num_regs,
			      regoff_t *__starts, regoff_t *__ends);

#if defined _REGEX_RE_COMP || defined _LIBC
# ifndef _CRAY
/* 4.2 bsd compatibility.  */
extern char *re_comp (const char *);
extern int re_exec (const char *);
# endif
#endif

/* GCC 2.95 and later have "__restrict"; C99 compilers have
   "restrict", and "configure" may have defined "restrict".
   Other compilers use __restrict, __restrict__, and _Restrict, and
   'configure' might #define 'restrict' to those words, so pick a
   different name.  */
#ifndef _Restrict_
# if 199901L <= __STDC_VERSION__
#  define _Restrict_ restrict
# elif 2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)
#  define _Restrict_ __restrict
# else
#  define _Restrict_
# endif
#endif
/* gcc 3.1 and up support the [restrict] syntax.  Don't trust
   sys/cdefs.h's definition of __restrict_arr, though, as it
   mishandles gcc -ansi -pedantic.  */
#ifndef _Restrict_arr_
# if ((199901L <= __STDC_VERSION__					\
       || ((3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__))	\
	   && !__STRICT_ANSI__))					\
      && !defined __GNUG__)
#  define _Restrict_arr_ _Restrict_
# else
#  define _Restrict_arr_
# endif
#endif

/* POSIX compatibility.  */
extern int regcomp (regex_t *_Restrict_ __preg,
		    const char *_Restrict_ __pattern,
		    int __cflags);

extern int regexec (const regex_t *_Restrict_ __preg,
		    const char *_Restrict_ __string, size_t __nmatch,
		    regmatch_t __pmatch[_Restrict_arr_],
		    int __eflags);

extern size_t regerror (int __errcode, const regex_t *_Restrict_ __preg,
			char *_Restrict_ __errbuf, size_t __errbuf_size);

extern void regfree (regex_t *__preg);


#ifdef __cplusplus
}
#endif	/* C++ */

#endif /* regex.h */