| Basic Installation |
| ================== |
| |
| These are generic installation instructions. See the file |
| INSTALL.tftp for specific install instructions for this package. |
| |
| The `configure' shell script attempts to guess correct values for |
| various system-dependent variables used during compilation. It uses |
| those values to create a `Makefile' in each directory of the package. |
| It may also create one or more `.h' files containing system-dependent |
| definitions. Finally, it creates a shell script `config.status' that |
| you can run in the future to recreate the current configuration, and a |
| file `config.log' containing compiler output (useful mainly for |
| debugging `configure'). |
| |
| It can also use an optional file (typically called `config.cache' |
| and enabled with `--cache-file=config.cache' or simply `-C') that saves |
| the results of its tests to speed up reconfiguring. (Caching is |
| disabled by default to prevent problems with accidental use of stale |
| cache files.) |
| |
| If you need to do unusual things to compile the package, please try |
| to figure out how `configure' could check whether to do them, and mail |
| diffs or instructions to the address given in the `README' so they can |
| be considered for the next release. If you are using the cache, and at |
| some point `config.cache' contains results you don't want to keep, you |
| may remove or edit it. |
| |
| The file `configure.ac' (or `configure.in') is used to create |
| `configure' by a program called `autoconf'. You only need |
| `configure.ac' if you want to change it or regenerate `configure' using |
| a newer version of `autoconf'. |
| |
| The simplest way to compile this package is: |
| |
| 1. `cd' to the directory containing the package's source code and type |
| `./configure' to configure the package for your system. If you're |
| using `csh' on an old version of System V, you might need to type |
| `sh ./configure' instead to prevent `csh' from trying to execute |
| `configure' itself. |
| |
| Running `configure' takes awhile. While running, it prints some |
| messages telling which features it is checking for. |
| |
| 2. Type `make' to compile the package. |
| |
| 3. Optionally, type `make check' to run any self-tests that come with |
| the package. |
| |
| 4. Type `make install' to install the programs and any data files and |
| documentation. |
| |
| 5. You can remove the program binaries and object files from the |
| source code directory by typing `make clean'. To also remove the |
| files that `configure' created (so you can compile the package for |
| a different kind of computer), type `make distclean'. There is |
| also a `make maintainer-clean' target, but that is intended mainly |
| for the package's developers. If you use it, you may have to get |
| all sorts of other programs in order to regenerate files that came |
| with the distribution. |
| |
| Compilers and Options |
| ===================== |
| |
| Some systems require unusual options for compilation or linking that |
| the `configure' script does not know about. Run `./configure --help' |
| for details on some of the pertinent environment variables. |
| |
| You can give `configure' initial values for variables by setting |
| them in the environment. You can do that on the command line like this: |
| |
| ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix |
| |
| *Note Environment Variables::, for more details. |
| |
| Compiling For Multiple Architectures |
| ==================================== |
| |
| You can compile the package for more than one kind of computer at the |
| same time, by placing the object files for each architecture in their |
| own directory. To do this, you must use a version of `make' that |
| supports the `VPATH' variable, such as GNU `make'. `cd' to the |
| directory where you want the object files and executables to go and run |
| the `configure' script. `configure' automatically checks for the |
| source code in the directory that `configure' is in and in `..'. |
| |
| If you have to use a `make' that does not support the `VPATH' |
| variable, you have to compile the package for one architecture at a time |
| in the source code directory. After you have installed the package for |
| one architecture, use `make distclean' before reconfiguring for another |
| architecture. |
| |
| Installation Names |
| ================== |
| |
| By default, `make install' will install the package's files in |
| `/usr/local/bin', `/usr/local/man', etc. You can specify an |
| installation prefix other than `/usr/local' by giving `configure' the |
| option `--prefix=PATH'. |
| |
| You can specify separate installation prefixes for |
| architecture-specific files and architecture-independent files. If you |
| give `configure' the option `--exec-prefix=PATH', the package will use |
| PATH as the prefix for installing programs and libraries. |
| Documentation and other data files will still use the regular prefix. |
| |
| In addition, if you use an unusual directory layout you can give |
| options like `--bindir=PATH' to specify different values for particular |
| kinds of files. Run `configure --help' for a list of the directories |
| you can set and what kinds of files go in them. |
| |
| If the package supports it, you can cause programs to be installed |
| with an extra prefix or suffix on their names by giving `configure' the |
| option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. |
| |
| Optional Features |
| ================= |
| |
| Some packages pay attention to `--enable-FEATURE' options to |
| `configure', where FEATURE indicates an optional part of the package. |
| They may also pay attention to `--with-PACKAGE' options, where PACKAGE |
| is something like `gnu-as' or `x' (for the X Window System). The |
| `README' should mention any `--enable-' and `--with-' options that the |
| package recognizes. |
| |
| For packages that use the X Window System, `configure' can usually |
| find the X include and library files automatically, but if it doesn't, |
| you can use the `configure' options `--x-includes=DIR' and |
| `--x-libraries=DIR' to specify their locations. |
| |
| Specifying the System Type |
| ========================== |
| |
| There may be some features `configure' cannot figure out |
| automatically, but needs to determine by the type of host the package |
| will run on. Usually `configure' can figure that out, but if it prints |
| a message saying it cannot guess the host type, give it the |
| `--build=TYPE' option. TYPE can either be a short name for the system |
| type, such as `sun4', or a canonical name which has the form: |
| |
| CPU-COMPANY-SYSTEM |
| |
| where SYSTEM can have one of these forms: |
| |
| OS |
| KERNEL-OS |
| |
| See the file `config.sub' for the possible values of each field. If |
| `config.sub' isn't included in this package, then this package doesn't |
| need to know the host type. |
| |
| If you are _building_ compiler tools for cross-compiling, you should |
| use the `--target=TYPE' option to select the type of system they will |
| produce code for. |
| |
| If you want to _use_ a cross compiler, that generates code for a |
| platform different from the build platform, you should specify the host |
| platform (i.e., that on which the generated programs will eventually be |
| run) with `--host=TYPE'. In this case, you should also specify the |
| build platform with `--build=TYPE', because, in this case, it may not |
| be possible to guess the build platform (it sometimes involves |
| compiling and running simple test programs, and this can't be done if |
| the compiler is a cross compiler). |
| |
| Sharing Defaults |
| ================ |
| |
| If you want to set default values for `configure' scripts to share, |
| you can create a site shell script called `config.site' that gives |
| default values for variables like `CC', `cache_file', and `prefix'. |
| `configure' looks for `PREFIX/share/config.site' if it exists, then |
| `PREFIX/etc/config.site' if it exists. Or, you can set the |
| `CONFIG_SITE' environment variable to the location of the site script. |
| A warning: not all `configure' scripts look for a site script. |
| |
| Environment Variables |
| ===================== |
| |
| Variables not defined in a site shell script can be set in the |
| environment passed to configure. However, some packages may run |
| configure again during the build, and the customized values of these |
| variables may be lost. In order to avoid this problem, you should set |
| them in the `configure' command line, using `VAR=value'. For example: |
| |
| ./configure CC=/usr/local2/bin/gcc |
| |
| will cause the specified gcc to be used as the C compiler (unless it is |
| overridden in the site shell script). |
| |
| `configure' Invocation |
| ====================== |
| |
| `configure' recognizes the following options to control how it |
| operates. |
| |
| `--help' |
| `-h' |
| Print a summary of the options to `configure', and exit. |
| |
| `--version' |
| `-V' |
| Print the version of Autoconf used to generate the `configure' |
| script, and exit. |
| |
| `--cache-file=FILE' |
| Enable the cache: use and save the results of the tests in FILE, |
| traditionally `config.cache'. FILE defaults to `/dev/null' to |
| disable caching. |
| |
| `--config-cache' |
| `-C' |
| Alias for `--cache-file=config.cache'. |
| |
| `--quiet' |
| `--silent' |
| `-q' |
| Do not print messages saying which checks are being made. To |
| suppress all normal output, redirect it to `/dev/null' (any error |
| messages will still be shown). |
| |
| `--srcdir=DIR' |
| Look for the package's source code in directory DIR. Usually |
| `configure' can determine that directory automatically. |
| |
| `configure' also accepts some other, not widely useful, options. Run |
| `configure --help' for more details. |
| |