# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# vim:set syn=automake:

# Variables to be defined:
#
#  TEST_VERBOSE - set to 0 or 1 to control test suite verbosity
#  TEST_ENV_VARS - environment variables to be set for the test suite
#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
#  test_tmpdir - test suite temporary directory
#  test_cases - list of test case files
#  test_data - list of test data files


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(nobase_dist_perllib_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/Makecheck.am
subdir = scripts
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
	$(top_srcdir)/m4/dpkg-build.m4 \
	$(top_srcdir)/m4/dpkg-compiler.m4 \
	$(top_srcdir)/m4/dpkg-coverage.m4 \
	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
	$(top_srcdir)/m4/dpkg-types.m4 \
	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(changelogdir)" \
	"$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)"
SCRIPTS = $(bin_SCRIPTS) $(changelog_SCRIPTS)
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(man3_MANS)
DATA = $(nobase_dist_perllib_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BZ2_LIBS = @BZ2_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURSES_LIBS = @CURSES_LIBS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GCOV = @GCOV@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
HAVE_DOT = @HAVE_DOT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LCOV = @LCOV@
LCOV_GENHTML = @LCOV_GENHTML@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_COVER = @PERL_COVER@
PERL_COVERAGE = @PERL_COVERAGE@
PERL_LIBDIR = @PERL_LIBDIR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PO4A = @PO4A@
POD2MAN = @POD2MAN@
POSUB = @POSUB@
RANLIB = @RANLIB@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSD_LIBS = @SSD_LIBS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
USE_PO4A = @USE_PO4A@
USE_UNICODE = @USE_UNICODE@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
admindir = @admindir@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
logdir = @logdir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = mk po
bin_SCRIPTS = \
	dpkg-architecture \
	dpkg-buildflags \
	dpkg-buildpackage \
	dpkg-checkbuilddeps \
	dpkg-distaddfile \
	dpkg-genchanges \
	dpkg-gencontrol \
	dpkg-gensymbols \
	dpkg-maintscript-helper \
	dpkg-mergechangelogs \
	dpkg-name \
	dpkg-parsechangelog \
	dpkg-scanpackages \
	dpkg-scansources \
	dpkg-shlibdeps \
	dpkg-source \
	dpkg-vendor

changelogdir = $(pkglibdir)/parsechangelog
changelog_SCRIPTS = \
	changelog/debian

EXTRA_DIST = \
	dpkg-architecture.pl \
	dpkg-buildflags.pl \
	dpkg-buildpackage.pl \
	dpkg-checkbuilddeps.pl \
	dpkg-distaddfile.pl \
	dpkg-genchanges.pl \
	dpkg-gencontrol.pl \
	dpkg-gensymbols.pl \
	dpkg-maintscript-helper.sh \
	dpkg-mergechangelogs.pl \
	dpkg-name.pl \
	dpkg-parsechangelog.pl \
	dpkg-scanpackages.pl \
	dpkg-scansources.pl \
	dpkg-shlibdeps.pl \
	dpkg-source.pl \
	dpkg-vendor.pl \
	changelog/debian.pl \
	$(test_cases) \
	$(test_data)

CLEANFILES = \
	$(bin_SCRIPTS) $(changelog_SCRIPTS)

perllibdir = $(PERL_LIBDIR)
nobase_dist_perllib_DATA = \
	Dpkg/Arch.pm \
	Dpkg/BuildFlags.pm \
	Dpkg/BuildOptions.pm \
	Dpkg/Changelog.pm \
	Dpkg/Changelog/Debian.pm \
	Dpkg/Changelog/Entry.pm \
	Dpkg/Changelog/Entry/Debian.pm \
	Dpkg/Changelog/Parse.pm \
	Dpkg/Checksums.pm \
	Dpkg/Compression.pm \
	Dpkg/Compression/FileHandle.pm \
	Dpkg/Compression/Process.pm \
	Dpkg/Conf.pm \
	Dpkg/Control.pm \
	Dpkg/Control/Changelog.pm \
	Dpkg/Control/Fields.pm \
	Dpkg/Control/Info.pm \
	Dpkg/Control/Hash.pm \
	Dpkg/Control/Types.pm \
	Dpkg/Deps.pm \
	Dpkg/ErrorHandling.pm \
	Dpkg/Exit.pm \
	Dpkg/Gettext.pm \
	Dpkg/Index.pm \
	Dpkg/Interface/Storable.pm \
	Dpkg/IPC.pm \
	Dpkg/Path.pm \
	Dpkg/Shlibs.pm \
	Dpkg/Shlibs/Objdump.pm \
	Dpkg/Shlibs/Symbol.pm \
	Dpkg/Shlibs/SymbolFile.pm \
	Dpkg/Shlibs/Cppfilt.pm \
	Dpkg/Source/Archive.pm \
	Dpkg/Source/Functions.pm \
	Dpkg/Source/Package.pm \
	Dpkg/Source/Package/V1.pm \
	Dpkg/Source/Package/V2.pm \
	Dpkg/Source/Package/V3/bzr.pm \
	Dpkg/Source/Package/V3/custom.pm \
	Dpkg/Source/Package/V3/native.pm \
	Dpkg/Source/Package/V3/git.pm \
	Dpkg/Source/Package/V3/quilt.pm \
	Dpkg/Source/Patch.pm \
	Dpkg/Substvars.pm \
	Dpkg/Vars.pm \
	Dpkg/Vendor.pm \
	Dpkg/Vendor/Debian.pm \
	Dpkg/Vendor/Default.pm \
	Dpkg/Vendor/Ubuntu.pm \
	Dpkg/Version.pm \
	Dpkg.pm


# Keep it even if empty to have man3dir correctly set
man3_MANS = 
do_perl_subst = $(AM_V_GEN) \
		sed -e "s:^\#![:space:]*/usr/bin/perl:\#!$(PERL):" \
		    -e "s:\$$dpkglibdir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$dpkglibdir=\"$(pkglibdir)\":" \
		    -e "s:\$$pkgdatadir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$pkgdatadir=\"$(pkgdatadir)\":" \
		    -e "s:\$$admindir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$admindir=\"$(admindir)\":" \
		    -e "s:\$$version[[:space:]]*=[[:space:]]*['\"][^'\"]*[\"']:\$$version=\"$(PACKAGE_VERSION)\":"

do_shell_subst = $(AM_V_GEN) \
		 sed -e "s:^version[[:space:]]*=[[:space:]]*['\"][^'\"]*[\"']:version=\"$(PACKAGE_VERSION)\":"

TEST_VERBOSE = 0
TEST_ENV_VARS = \
	DPKG_DATADIR=$(srcdir)/.. \
	DPKG_ORIGINS_DIR=$(srcdir)/t/origins

TEST_COVERAGE = $(PERL_COVERAGE)
test_tmpdir = t.tmp
test_cases = \
	t/000_pod.t \
	t/100_Dpkg_Version.t \
	t/190_Dpkg_Shlibs_Cppfilt.t \
	t/200_Dpkg_Shlibs.t \
	t/300_Dpkg_BuildOptions.t \
	t/400_Dpkg_Deps.t \
	t/500_Dpkg_Path.t \
	t/600_Dpkg_Changelog.t \
	t/600_Dpkg_Changelog_Ubuntu.t \
	t/700_Dpkg_Control.t \
	t/750_Dpkg_Substvars.t \
	t/800_Dpkg_IPC.t \
	t/850_Dpkg_Compression.t \
	t/910_merge_changelogs.t

check_DATA = \
	$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-amd64 \
	$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-i386 \
	$(test_tmpdir)/200_Dpkg_Shlibs/objdump.patterns

test_data = \
	t/200_Dpkg_Shlibs/symbols.fake-1 \
	t/200_Dpkg_Shlibs/symbols.fake-2 \
	t/200_Dpkg_Shlibs/symbols.fake-3 \
	t/200_Dpkg_Shlibs/symbols.include-1 \
	t/200_Dpkg_Shlibs/symbols.include-2 \
	t/200_Dpkg_Shlibs/symbols.include-3 \
	t/200_Dpkg_Shlibs/basictags.symbols \
	t/200_Dpkg_Shlibs/basictags.c \
	t/200_Dpkg_Shlibs/patterns.symbols \
	t/200_Dpkg_Shlibs/patterns.cpp \
	t/200_Dpkg_Shlibs/patterns.map \
	t/200_Dpkg_Shlibs/ld.so.conf \
	t/200_Dpkg_Shlibs/ld.so.conf_2 \
	t/200_Dpkg_Shlibs/ld.so.conf.d/normal.conf \
	t/200_Dpkg_Shlibs/ld.so.conf.d/inf_recurse.conf \
	t/200_Dpkg_Shlibs/ld.so.conf.d/recursive.conf \
	t/200_Dpkg_Shlibs/objdump.glib-ia64 \
	t/200_Dpkg_Shlibs/objdump.libc6-2.3 \
	t/200_Dpkg_Shlibs/objdump.libc6-2.6 \
	t/200_Dpkg_Shlibs/objdump.dbd-pg \
	t/200_Dpkg_Shlibs/objdump.ls \
	t/600_Dpkg_Changelog/countme \
	t/600_Dpkg_Changelog/fields \
	t/600_Dpkg_Changelog/misplaced-tz \
	t/600_Dpkg_Changelog/regressions \
	t/600_Dpkg_Changelog/shadow \
	t/700_Dpkg_Control/control-1 \
	t/750_Dpkg_Substvars/substvars1 \
	t/910_merge_changelogs/ch-old \
	t/910_merge_changelogs/ch-a \
	t/910_merge_changelogs/ch-b \
	t/910_merge_changelogs/ch-merged \
	t/910_merge_changelogs/ch-merged-basic \
	t/910_merge_changelogs/ch-merged-pr \
	t/910_merge_changelogs/ch-merged-pr-basic \
	t/origins/debian \
	t/origins/default \
	t/origins/ubuntu

objdump_lib_name = lib`basename $@`.so
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makecheck.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign scripts/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files
install-changelogSCRIPTS: $(changelog_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(changelogdir)" || $(MKDIR_P) "$(DESTDIR)$(changelogdir)"
	@list='$(changelog_SCRIPTS)'; test -n "$(changelogdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(changelogdir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(changelogdir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-changelogSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(changelog_SCRIPTS)'; test -n "$(changelogdir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(changelogdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(changelogdir)" && rm -f $$files
install-man3: $(man3_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
	@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
	done; }

uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_perllibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(perllibdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(perllibdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_DATA)
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(changelogdir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-changelogSCRIPTS install-data-local \
	install-man install-nobase_dist_perllibDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binSCRIPTS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man3

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-changelogSCRIPTS \
	uninstall-local uninstall-man \
	uninstall-nobase_dist_perllibDATA

uninstall-man: uninstall-man3

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
	ctags-recursive install-am install-data-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am check-local clean clean-generic \
	clean-local ctags ctags-recursive distclean distclean-generic \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-binSCRIPTS install-changelogSCRIPTS \
	install-data install-data-am install-data-hook \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man3 \
	install-nobase_dist_perllibDATA install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-binSCRIPTS uninstall-changelogSCRIPTS \
	uninstall-local uninstall-man uninstall-man3 \
	uninstall-nobase_dist_perllibDATA


%: %.pl Makefile
	@test -d `dirname $@` || $(mkdir_p) `dirname $@`
	$(do_perl_subst) <$< >$@
	$(AM_V_at) chmod +x $@

%: %.sh Makefile
	@test -d `dirname $@` || $(mkdir_p) `dirname $@`
	$(do_shell_subst) <$< >$@
	$(AM_V_at) chmod +x $@

install-data-local:
# Install manual pages for perl modules manually as make can't deal
# properly with filenames containing colons
# Remove empty manual pages (perl modules not documented)
@BUILD_POD_DOC_TRUE@	$(mkdir_p) $(DESTDIR)$(man3dir)
@BUILD_POD_DOC_TRUE@	for module in $(nobase_dist_perllib_DATA); do \
@BUILD_POD_DOC_TRUE@	    name=`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$//'`; \
@BUILD_POD_DOC_TRUE@	    pod2man --utf8 --center=libdpkg-perl --release=$(VERSION) \
@BUILD_POD_DOC_TRUE@		--name="$$name"	--section=3 $(srcdir)/$$module \
@BUILD_POD_DOC_TRUE@		>$(DESTDIR)$(man3dir)/$$name.3; \
@BUILD_POD_DOC_TRUE@	    test -s $(DESTDIR)$(man3dir)/$$name.3 || \
@BUILD_POD_DOC_TRUE@		rm -f $(DESTDIR)$(man3dir)/$$name.3; \
@BUILD_POD_DOC_TRUE@	done

# Ideally we'd use 'sed -i', but unfortunately that's not portable.
install-data-hook:
	cp -p $(DESTDIR)$(perllibdir)/Dpkg.pm \
	      $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
	$(do_perl_subst) <$(DESTDIR)$(perllibdir)/Dpkg.pm.tmp \
	                 >$(DESTDIR)$(perllibdir)/Dpkg.pm
	rm $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp

uninstall-local:
@BUILD_POD_DOC_TRUE@	for module in $(nobase_dist_perllib_DATA); do \
@BUILD_POD_DOC_TRUE@	    rm -f $(DESTDIR)$(man3dir)/`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$/.3/'`; \
@BUILD_POD_DOC_TRUE@	done

coverage: check
	$(PERL_COVER) -silent \
	  -ignore_re '^t/.*\.t' \
	  -outputdir $(top_builddir)/doc/coverage/scripts

coverage-clean:
	rm -rf cover_db
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-amd64 $(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-i386: $(srcdir)/t/200_Dpkg_Shlibs/basictags.c
	$(mkdir_p) $(test_tmpdir)/200_Dpkg_Shlibs
	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
	  $(if $(findstring amd64,$@),-DAMD64,) -o $(objdump_lib_name)
	objdump -w -f -p -T -R $(objdump_lib_name) | \
	  sed "s/$(objdump_lib_name)/libbasictags.so.1/g" > $@
	rm -f $(objdump_lib_name)

$(test_tmpdir)/200_Dpkg_Shlibs/objdump.patterns: $(srcdir)/t/200_Dpkg_Shlibs/patterns.cpp $(srcdir)/t/200_Dpkg_Shlibs/patterns.map
	$(mkdir_p) $(test_tmpdir)/200_Dpkg_Shlibs
	$(CXX) $(CXXFLAGS) -shared -fPIC -Wl,-soname -Wl,libpatterns.so.1 \
	    -Wl,--version-script=$(srcdir)/t/200_Dpkg_Shlibs/patterns.map $< \
	    -o $(objdump_lib_name)
	objdump -w -f -p -T -R $(objdump_lib_name) | \
	  sed "s/$(objdump_lib_name)/libpatterns.so.1/g" > $@
	rm -f $(objdump_lib_name)

check-clean:
	rm -fr $(test_tmpdir)

check-local: $(test_data) $(test_cases)
	$(mkdir_p) $(test_tmpdir)
	PATH="$(top_builddir)/src:$(top_builddir)/scripts:$(top_builddir)/utils:$(PATH)" \
	  LC_ALL=C \
	  $(TEST_ENV_VARS) \
	  srcdir=$(srcdir) builddir=$(builddir) \
	  PERL5LIB=$(top_srcdir)/scripts PERL_DL_NONLAZY=1 \
	  PERL5OPT=$(TEST_COVERAGE) \
	  $(PERL) -I$(top_srcdir)/scripts \
	    -MExtUtils::Command::MM -e "test_harness($(TEST_VERBOSE), '.')" \
	    $(addprefix $(srcdir)/,$(test_cases))

clean-local: check-clean coverage-clean
	rm -fr man

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: