| /* | |
| * (C) Copyright 2001 | |
| * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <asm/ppc4xx.h> | |
| #include <asm/processor.h> | |
| /* | |
| * include common flash code (for esd boards) | |
| */ | |
| #include "../common/flash.c" | |
| /*----------------------------------------------------------------------- | |
| * Functions | |
| */ | |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info); | |
| static void flash_get_offsets (ulong base, flash_info_t *info); | |
| /*----------------------------------------------------------------------- | |
| */ | |
| unsigned long flash_init (void) | |
| { | |
| unsigned long size_b0; | |
| int i; | |
| uint pbcr; | |
| unsigned long base_b0; | |
| /* Init: no FLASHes known */ | |
| for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | |
| flash_info[i].flash_id = FLASH_UNKNOWN; | |
| } | |
| /* Static FLASH Bank configuration here - FIXME XXX */ | |
| size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); | |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { | |
| printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", | |
| size_b0, size_b0<<20); | |
| } | |
| /* Setup offsets */ | |
| flash_get_offsets (-size_b0, &flash_info[0]); | |
| /* Re-do sizing to get full correct info */ | |
| mtdcr(EBC0_CFGADDR, PB0CR); | |
| pbcr = mfdcr(EBC0_CFGDATA); | |
| mtdcr(EBC0_CFGADDR, PB0CR); | |
| base_b0 = -size_b0; | |
| pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); | |
| mtdcr(EBC0_CFGDATA, pbcr); | |
| /* printf("PB1CR = %x\n", pbcr); */ | |
| /* Monitor protection ON by default */ | |
| (void)flash_protect(FLAG_PROTECT_SET, | |
| -monitor_flash_len, | |
| 0xffffffff, | |
| &flash_info[0]); | |
| flash_info[0].size = size_b0; | |
| return (size_b0); | |
| } |