| /* | |
| * OMAP EHCI port support | |
| * Based on LINUX KERNEL | |
| * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c | |
| * | |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com* | |
| * Author: Govindraj R <govindraj.raja@ti.com> | |
| * | |
| * This program is free software: you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 of | |
| * the License as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #ifndef _OMAP_COMMON_EHCI_H_ | |
| #define _OMAP_COMMON_EHCI_H_ | |
| enum usbhs_omap_port_mode { | |
| OMAP_USBHS_PORT_MODE_UNUSED, | |
| OMAP_EHCI_PORT_MODE_PHY, | |
| OMAP_EHCI_PORT_MODE_TLL, | |
| OMAP_EHCI_PORT_MODE_HSIC, | |
| }; | |
| #ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS | |
| #define OMAP_HS_USB_PORTS CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS | |
| #else | |
| #define OMAP_HS_USB_PORTS 3 | |
| #endif | |
| #define is_ehci_phy_mode(x) ((x) == OMAP_EHCI_PORT_MODE_PHY) | |
| #define is_ehci_tll_mode(x) ((x) == OMAP_EHCI_PORT_MODE_TLL) | |
| #define is_ehci_hsic_mode(x) ((x) == OMAP_EHCI_PORT_MODE_HSIC) | |
| /* Values of UHH_REVISION - Note: these are not given in the TRM */ | |
| #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ | |
| #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ | |
| #define OMAP_USBHS_REV2_1 0x50700101 /* OMAP5 */ | |
| /* UHH Register Set */ | |
| #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) | |
| #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) | |
| #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) | |
| #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) | |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS 1 | |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) | |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) | |
| #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) | |
| #define OMAP_P1_MODE_CLEAR (3 << 16) | |
| #define OMAP_P1_MODE_TLL (1 << 16) | |
| #define OMAP_P1_MODE_HSIC (3 << 16) | |
| #define OMAP_P2_MODE_CLEAR (3 << 18) | |
| #define OMAP_P2_MODE_TLL (1 << 18) | |
| #define OMAP_P2_MODE_HSIC (3 << 18) | |
| #define OMAP_P3_MODE_CLEAR (3 << 20) | |
| #define OMAP_P3_MODE_HSIC (3 << 20) | |
| /* EHCI Register Set */ | |
| #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) | |
| #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 | |
| #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 | |
| #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 | |
| #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 | |
| #define OMAP_REV1_TLL_CHANNEL_COUNT 3 | |
| #define OMAP_REV2_TLL_CHANNEL_COUNT 2 | |
| /* TLL Register Set */ | |
| #define OMAP_TLL_CHANNEL_CONF(num) (0x004 * num) | |
| #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) | |
| #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) | |
| #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) | |
| #define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI (2 << 1) | |
| #define OMAP_TLL_CHANNEL_CONF_CHANEN 1 | |
| struct omap_usbhs_board_data { | |
| enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS]; | |
| }; | |
| struct omap_usbtll { | |
| u32 rev; /* 0x00 */ | |
| u32 hwinfo; /* 0x04 */ | |
| u8 reserved1[0x8]; | |
| u32 sysc; /* 0x10 */ | |
| u32 syss; /* 0x14 */ | |
| u32 irqst; /* 0x18 */ | |
| u32 irqen; /* 0x1c */ | |
| u8 reserved2[0x10]; | |
| u32 shared_conf; /* 0x30 */ | |
| u8 reserved3[0xc]; | |
| u32 channel_conf; /* 0x40 */ | |
| }; | |
| struct omap_uhh { | |
| u32 rev; /* 0x00 */ | |
| u32 hwinfo; /* 0x04 */ | |
| u8 reserved1[0x8]; | |
| u32 sysc; /* 0x10 */ | |
| u32 syss; /* 0x14 */ | |
| u8 reserved2[0x28]; | |
| u32 hostconfig; /* 0x40 */ | |
| u32 debugcsr; /* 0x44 */ | |
| }; | |
| struct omap_ehci { | |
| u32 hccapbase; /* 0x00 */ | |
| u32 hcsparams; /* 0x04 */ | |
| u32 hccparams; /* 0x08 */ | |
| u8 reserved1[0x04]; | |
| u32 usbcmd; /* 0x10 */ | |
| u32 usbsts; /* 0x14 */ | |
| u32 usbintr; /* 0x18 */ | |
| u32 frindex; /* 0x1c */ | |
| u32 ctrldssegment; /* 0x20 */ | |
| u32 periodiclistbase; /* 0x24 */ | |
| u32 asysnclistaddr; /* 0x28 */ | |
| u8 reserved2[0x24]; | |
| u32 configflag; /* 0x50 */ | |
| u32 portsc_i; /* 0x54 */ | |
| u8 reserved3[0x38]; | |
| u32 insreg00; /* 0x90 */ | |
| u32 insreg01; /* 0x94 */ | |
| u32 insreg02; /* 0x98 */ | |
| u32 insreg03; /* 0x9c */ | |
| u32 insreg04; /* 0xa0 */ | |
| u32 insreg05_utmi_ulpi; /* 0xa4 */ | |
| u32 insreg06; /* 0xa8 */ | |
| u32 insreg07; /* 0xac */ | |
| u32 insreg08; /* 0xb0 */ | |
| }; | |
| /* | |
| * FIXME: forward declaration of this structs needed because omap got the | |
| * ehci implementation backwards. move out ehci_hcd_x from board files | |
| */ | |
| struct ehci_hccr; | |
| struct ehci_hcor; | |
| int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata, | |
| struct ehci_hccr **hccr, struct ehci_hcor **hcor); | |
| int omap_ehci_hcd_stop(void); | |
| #endif /* _OMAP_COMMON_EHCI_H_ */ |