# do not edit this file, it will be overwritten on update

# Rules to support older kernels, which migth miss functionality needed
# for the recent udev version.
#
# This file is used and maintained by Gentoo.

ACTION=="remove", GOTO="kernel_compat_end"

#
# sysfs timing rules
#

# needed for kernels <2.6.30
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", WAIT_FOR="descriptors"

#
# naming device rules
#

# dvb device naming
# needed for kernels <2.6.29-rc1
SUBSYSTEM=="dvb", ENV{DVB_ADAPTER_NUM}=="", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"

# naming rules for kernels <2.6.31

# alsa names
KERNEL=="controlC[0-9]*",	NAME="snd/%k"
KERNEL=="hwC[D0-9]*",		NAME="snd/%k"
KERNEL=="pcmC[D0-9cp]*",	NAME="snd/%k"
KERNEL=="midiC[D0-9]*",		NAME="snd/%k"
KERNEL=="timer",		NAME="snd/%k"
KERNEL=="seq",			NAME="snd/%k"

KERNEL=="mwave",		NAME="modems/mwave"

KERNEL=="mouse*|mice|event*",	NAME="input/%k"
KERNEL=="ts[0-9]*|uinput",	NAME="input/%k"
KERNEL=="js[0-9]*",		NAME="input/%k"

KERNEL=="card[0-9]*",		NAME="dri/%k"

SUBSYSTEM=="dvb", ENV{DVB_ADAPTER_NUM}=="?*", NAME="dvb/adapter$env{DVB_ADAPTER_NUM}/$env{DVB_DEVICE_TYPE}$env{DVB_DEVICE_NUM}"

# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}"

# printer
SUBSYSTEM=="usb",		KERNEL=="lp*", NAME="usb/%k"

# block
KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%k"
KERNEL=="pktcdvd", NAME="pktcdvd/control"

KERNEL=="rawctl", NAME="raw/rawctl"
SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k"
SUBSYSTEM=="bsg", NAME="bsg/%k"
SUBSYSTEM=="aoe", NAME="etherd/%k"

# network
KERNEL=="tun",			NAME="net/%k"

# CPU
KERNEL=="cpu[0-9]*",		NAME="cpu/%n/cpuid"
KERNEL=="msr[0-9]*",		NAME="cpu/%n/msr"
KERNEL=="microcode",		NAME="cpu/microcode", MODE="0600"

# miscellaneous
KERNEL=="auer[0-9]*",		NAME="usb/%k"
KERNEL=="hw_random",		NAME="hwrng"
KERNEL=="sxctl",		NAME="specialix_sxctl"
KERNEL=="rioctl",		NAME="specialix_rioctl"
KERNEL=="iowarrior[0-9]*",	NAME="usb/%k"
KERNEL=="hiddev[0-9]*",		NAME="usb/%k"
KERNEL=="legousbtower[0-9]*",	NAME="usb/%k"
KERNEL=="dabusb[0-9]*",		NAME="usb/%k"
KERNEL=="usbdpfp[0-9]*",	NAME="usb/%k"
KERNEL=="cpad[0-9]*",		NAME="usb/%k"

# end of naming rules for kernel <2.6.31


#
# module loading rules
#
ACTION!="add", GOTO="kernel_compat_end"

# No need for more code, as MODALIAS is present
ENV{MODALIAS}=="?*", GOTO="kernel_compat_end"

# needed for kernel <2.6.30-rc1
SUBSYSTEM=="scsi", ATTR{type}=="8", RUN+="/sbin/modprobe -b ch"
SUBSYSTEM=="mmc", RUN+="/sbin/modprobe -b mmc_block"

# needed for kernel <2.6.27-rc5
# acpi will do on newer kernels
SUBSYSTEM=="pnp", DRIVER!="?*", \
  RUN{ignore_error}+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"

# see extras/qemu/42-qemu-usb.rules, version for 2.6.32 + older.
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Mouse", ATTR{serial}=="42", TEST=="power/level", ATTR{power/level}="auto"
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Tablet", ATTR{serial}=="42", TEST=="power/level", ATTR{power/level}="auto"
ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Keyboard", ATTR{serial}=="42", TEST=="power/level", ATTR{power/level}="auto"

LABEL="kernel_compat_end"