| * Freescale MXC Electrophoretic Display Controller (EPDC) |
| |
| Required properties: |
| - compatible: Should be "fsl,<chip>-epdc". Supported chips include |
| imx6dl and imx6sl |
| - reg: Address and length of the register set for EPDC |
| - interrupts: Should contain EPDC interrupts |
| - clocks: the clocks for EPDC |
| - pinctrl-names: should be "default" |
| - pinctrl-0: should be pinctrl_ipu1_1 or pinctrl_ipu2_1, which depends on the |
| IPU connected. |
| - V3P3_supply: power supply for EPDC_PWRCTRL0 from pmic |
| - VCOM_supply: power supply for EPDC_VCOM0 from pmic |
| - DISPLAY_supply: power supply enable for pmic |
| |
| Examples: |
| |
| imx6_epdc@0x020f8000 { |
| compatible = "fsl,imx6dl-epdc"; |
| reg = <0x020f8000 4000>; |
| interrupts = <0 97 0x04>; |
| clocks = <&clks 133>, <&clks 137>; /* ipu2, ipu2_di1 */ |
| clock-names = "epdc-axi", "epdc-pix"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_epdc_0>; |
| V3P3_supply = <&V3P3_reg>; |
| VCOM_supply = <&VCOM_reg>; |
| DISPLAY_supply = <&DISPLAY_reg>; |
| status = "disabled"; |
| }; |
