nspr-4.8.6/mozilla/nsprpub/pr/include/md/_hpux.h - nest-learning-thermostat/5.1.5/nspr - Git at Google

 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
 /* ***** BEGIN LICENSE BLOCK *****
  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
  *
  * The contents of this file are subject to the Mozilla Public License Version
  * 1.1 (the "License"); you may not use this file except in compliance with
  * the License. You may obtain a copy of the License at
  * http://www.mozilla.org/MPL/
  *
  * Software distributed under the License is distributed on an "AS IS" basis,
  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
  * for the specific language governing rights and limitations under the
  * License.
  *
  * The Original Code is the Netscape Portable Runtime (NSPR).
  *
  * The Initial Developer of the Original Code is
  * Netscape Communications Corporation.
  * Portions created by the Initial Developer are Copyright (C) 1998-2000
  * the Initial Developer. All Rights Reserved.
  *
  * Contributor(s):
  *
  * Alternatively, the contents of this file may be used under the terms of
  * either the GNU General Public License Version 2 or later (the "GPL"), or
  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
  * in which case the provisions of the GPL or the LGPL are applicable instead
  * of those above. If you wish to allow use of your version of this file only
  * under the terms of either the GPL or the LGPL, and not to allow others to
  * use your version of this file under the terms of the MPL, indicate your
  * decision by deleting the provisions above and replace them with the notice
  * and other provisions required by the GPL or the LGPL. If you do not delete
  * the provisions above, a recipient may use your version of this file under
  * the terms of any one of the MPL, the GPL or the LGPL.
  *
  * ***** END LICENSE BLOCK ***** */

 #ifndef nspr_xhppa_defs_h___
 #define nspr_xhppa_defs_h___

 /*
  * Internal configuration macros
  */

 #define PR_LINKER_ARCH    "hpux"
 #define _PR_SI_SYSNAME   "HPUX"
 #ifdef __ia64
 #define _PR_SI_ARCHITECTURE "ia64"
 #define PR_DLL_SUFFIX        ".so"
 #else
 /*
  * _PR_SI_ARCHITECTURE must be "hppa1.1" for backward compatibility.
  * It was changed to "hppa" in NSPR 4.6.2, but was changed back in
  * NSPR 4.6.4.
  */
 #define _PR_SI_ARCHITECTURE "hppa1.1"
 #define PR_DLL_SUFFIX        ".sl"
 #endif

 #define _PR_VMBASE        0x30000000
 #define _PR_STACK_VMBASE    0x50000000
 /*
  * _USE_BIG_FDS increases the size of fd_set from 256 bytes to
  * about 7500 bytes.  PR_Poll allocates three fd_sets on the
  * stack, so it is safer to also increase the default thread
  * stack size.
  */
 #define _MD_DEFAULT_STACK_SIZE    (2*65536L)
 #define _MD_MINIMUM_STACK_SIZE    (2*65536L)
 #define _MD_MMAP_FLAGS          MAP_PRIVATE

 #define NEED_TIME_R

 #define HAVE_STACK_GROWING_UP
 #undef	HAVE_WEAK_IO_SYMBOLS
 #undef	HAVE_WEAK_MALLOC_SYMBOLS
 #define	HAVE_DLL
 #ifdef IS_64
 #define USE_DLFCN
 #else
 #define USE_HPSHL
 #endif
 #ifndef HAVE_STRERROR
 #define HAVE_STRERROR
 #endif
 #define _PR_POLL_AVAILABLE
 #define _PR_USE_POLL
 #define _PR_STAT_HAS_ONLY_ST_ATIME
 #define _PR_HAVE_POSIX_SEMAPHORES
 #define PR_HAVE_POSIX_NAMED_SHARED_MEMORY
 #define _PR_ACCEPT_INHERIT_NONBLOCK

 #if defined(__ia64)
 #define _PR_HAVE_ATOMIC_OPS
 #define _MD_INIT_ATOMIC()
 extern PRInt32 _PR_ia64_AtomicIncrement(PRInt32 *val);
 #define _MD_ATOMIC_INCREMENT          _PR_ia64_AtomicIncrement
 extern PRInt32 _PR_ia64_AtomicDecrement(PRInt32 *val);
 #define _MD_ATOMIC_DECREMENT          _PR_ia64_AtomicDecrement
 extern PRInt32 _PR_ia64_AtomicAdd(PRInt32 *ptr, PRInt32 val);
 #define _MD_ATOMIC_ADD                _PR_ia64_AtomicAdd
 extern PRInt32 _PR_ia64_AtomicSet(PRInt32 *val, PRInt32 newval);
 #define _MD_ATOMIC_SET                _PR_ia64_AtomicSet
 #endif

 #define _PR_HAVE_GETIPNODEBYNAME
 #define _PR_HAVE_GETIPNODEBYADDR
 #define _PR_HAVE_GETADDRINFO
 #ifdef _PR_INET6
 #define _PR_HAVE_INET_NTOP
 #else
 #define _PR_INET6_PROBE
 #define _PR_HAVE_MD_SOCKADDR_IN6
 /* isomorphic to struct in6_addr on HP-UX B.11.23 */
 struct _md_in6_addr {
     union {
         PRUint8   _S6_u8[16];
         PRUint16  _S6_u16[8];
         PRUint32  _S6_u32[4];
         PRUint32  __S6_align;
     } _s6_un;
 };
 /* isomorphic to struct sockaddr_in6 on HP-UX B.11.23 */
 struct _md_sockaddr_in6 {
     PRUint16 sin6_family;
     PRUint16 sin6_port;
     PRUint32 sin6_flowinfo;
     struct _md_in6_addr sin6_addr;
     PRUint32 sin6_scope_id;
 };
 #endif

 #if !defined(_PR_PTHREADS)

 #include <syscall.h>
 #include <setjmp.h>

 #define USE_SETJMP

 #define _MD_GET_SP(_t) (*((int *)((_t)->md.jb) + 1))
 #define PR_NUM_GCREGS _JBLEN
 /* Caveat: This makes jmp_buf full of doubles. */
 #define CONTEXT(_th) ((_th)->md.jb)

     /* Stack needs two frames (64 bytes) at the bottom */ \
 #define _MD_SET_THR_SP(_t, _sp)     ((_MD_GET_SP(_t)) = (int) (_sp + 64 *2))
 #define SAVE_CONTEXT(_th)           _setjmp(CONTEXT(_th))
 #define GOTO_CONTEXT(_th)           _longjmp(CONTEXT(_th), 1)

 #if !defined(PTHREADS_USER)

 #define _MD_INIT_CONTEXT(_thread, _sp, _main, status) \
 { \
     *(status) = PR_TRUE; \
     if (_setjmp(CONTEXT(_thread))) (*_main)(); \
     /* Stack needs two frames (64 bytes) at the bottom */ \
     (_MD_GET_SP(_thread)) = (int) ((_sp) + 64*2); \
 }

 #define _MD_SWITCH_CONTEXT(_thread) \
     if (!_setjmp(CONTEXT(_thread))) { \
     (_thread)->md.errcode = errno; \
     _PR_Schedule(); \
     }

 /*
 ** Restore a thread context, saved by _MD_SWITCH_CONTEXT
 */
 #define _MD_RESTORE_CONTEXT(_thread) \
 { \
     errno = (_thread)->md.errcode; \
     _MD_SET_CURRENT_THREAD(_thread); \
     _longjmp(CONTEXT(_thread), 1); \
 }

 /* Machine-dependent (MD) data structures.  HP-UX has no native threads. */

 struct _MDThread {
     jmp_buf jb;
     int id;
     int errcode;
 };

 struct _MDThreadStack {
     PRInt8 notused;
 };

 struct _MDLock {
     PRInt8 notused;
 };

 struct _MDSemaphore {
     PRInt8 notused;
 };

 struct _MDCVar {
     PRInt8 notused;
 };

 struct _MDSegment {
     PRInt8 notused;
 };

 /*
  * md-specific cpu structure field
  */
 #define _PR_MD_MAX_OSFD FD_SETSIZE

 struct _MDCPU_Unix {
     PRCList ioQ;
     PRUint32 ioq_timeout;
     PRInt32 ioq_max_osfd;
     PRInt32 ioq_osfd_cnt;
 #ifndef _PR_USE_POLL
     fd_set fd_read_set, fd_write_set, fd_exception_set;
     PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],
 				fd_exception_cnt[_PR_MD_MAX_OSFD];
 #else
 	struct pollfd *ioq_pollfds;
 	int ioq_pollfds_size;
 #endif	/* _PR_USE_POLL */
 };

 #define _PR_IOQ(_cpu)			((_cpu)->md.md_unix.ioQ)
 #define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))
 #define _PR_FD_READ_SET(_cpu)		((_cpu)->md.md_unix.fd_read_set)
 #define _PR_FD_READ_CNT(_cpu)		((_cpu)->md.md_unix.fd_read_cnt)
 #define _PR_FD_WRITE_SET(_cpu)		((_cpu)->md.md_unix.fd_write_set)
 #define _PR_FD_WRITE_CNT(_cpu)		((_cpu)->md.md_unix.fd_write_cnt)
 #define _PR_FD_EXCEPTION_SET(_cpu)	((_cpu)->md.md_unix.fd_exception_set)
 #define _PR_FD_EXCEPTION_CNT(_cpu)	((_cpu)->md.md_unix.fd_exception_cnt)
 #define _PR_IOQ_TIMEOUT(_cpu)		((_cpu)->md.md_unix.ioq_timeout)
 #define _PR_IOQ_MAX_OSFD(_cpu)		((_cpu)->md.md_unix.ioq_max_osfd)
 #define _PR_IOQ_OSFD_CNT(_cpu)		((_cpu)->md.md_unix.ioq_osfd_cnt)
 #define _PR_IOQ_POLLFDS(_cpu)		((_cpu)->md.md_unix.ioq_pollfds)
 #define _PR_IOQ_POLLFDS_SIZE(_cpu)	((_cpu)->md.md_unix.ioq_pollfds_size)

 #define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu)	32

 struct _MDCPU {
     struct _MDCPU_Unix md_unix;
 };

 #define _MD_INIT_LOCKS()
 #define _MD_NEW_LOCK(lock) PR_SUCCESS
 #define _MD_FREE_LOCK(lock)
 #define _MD_LOCK(lock)
 #define _MD_UNLOCK(lock)
 #define _MD_INIT_IO()
 #define _MD_IOQ_LOCK()
 #define _MD_IOQ_UNLOCK()

 #define _MD_INIT_RUNNING_CPU(cpu)       _MD_unix_init_running_cpu(cpu)
 #define _MD_INIT_THREAD                 _MD_InitializeThread
 #define _MD_EXIT_THREAD(thread)
 #define _MD_SUSPEND_THREAD(thread)      _MD_suspend_thread
 #define _MD_RESUME_THREAD(thread)       _MD_resume_thread
 #define _MD_CLEAN_THREAD(_thread)

 #else /* PTHREADS_USER	*/

 #include "_nspr_pthread.h"

 #endif /* PTHREADS_USER	*/

 #endif  /* !defined(_PR_PTHREADS) */

 #if !defined(PTHREADS_USER)
 #define _MD_EARLY_INIT                 	_MD_EarlyInit
 #define _MD_FINAL_INIT					_PR_UnixInit
 #endif

 #if defined(HPUX_LW_TIMER)
 extern void _PR_HPUX_LW_IntervalInit(void);
 extern PRIntervalTime _PR_HPUX_LW_GetInterval(void);
 #define _MD_INTERVAL_INIT                 _PR_HPUX_LW_IntervalInit
 #define _MD_GET_INTERVAL                  _PR_HPUX_LW_GetInterval
 #define _MD_INTERVAL_PER_SEC()            1000
 #else
 #define _MD_GET_INTERVAL                  _PR_UNIX_GetInterval
 #define _MD_INTERVAL_PER_SEC              _PR_UNIX_TicksPerSecond
 #endif

 /*
  * We wrapped the select() call.  _MD_SELECT refers to the built-in,
  * unwrapped version.
  */
 #define _MD_SELECT(nfds,r,w,e,tv) syscall(SYS_select,nfds,r,w,e,tv)

 #include <poll.h>
 #define _MD_POLL(fds,nfds,timeout) syscall(SYS_poll,fds,nfds,timeout)

 #ifdef HPUX11
 extern void _MD_hpux_map_sendfile_error(int err);
 #endif /* HPUX11 */

 #endif /* nspr_xhppa_defs_h___ */
	/* -- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -- */
	/* *** BEGIN LICENSE BLOCK ***
	* Version: MPL 1.1/GPL 2.0/LGPL 2.1
	*
	* The contents of this file are subject to the Mozilla Public License Version
	* 1.1 (the "License"); you may not use this file except in compliance with
	* the License. You may obtain a copy of the License at
	* http://www.mozilla.org/MPL/
	*
	* Software distributed under the License is distributed on an "AS IS" basis,
	* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
	* for the specific language governing rights and limitations under the
	* License.
	*
	* The Original Code is the Netscape Portable Runtime (NSPR).
	*
	* The Initial Developer of the Original Code is
	* Netscape Communications Corporation.
	* Portions created by the Initial Developer are Copyright (C) 1998-2000
	* the Initial Developer. All Rights Reserved.
	*
	* Contributor(s):
	*
	* Alternatively, the contents of this file may be used under the terms of
	* either the GNU General Public License Version 2 or later (the "GPL"), or
	* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
	* in which case the provisions of the GPL or the LGPL are applicable instead
	* of those above. If you wish to allow use of your version of this file only
	* under the terms of either the GPL or the LGPL, and not to allow others to
	* use your version of this file under the terms of the MPL, indicate your
	* decision by deleting the provisions above and replace them with the notice
	* and other provisions required by the GPL or the LGPL. If you do not delete
	* the provisions above, a recipient may use your version of this file under
	* the terms of any one of the MPL, the GPL or the LGPL.
	*
	* *** END LICENSE BLOCK *** */

	#ifndef nspr_xhppa_defs_h___
	#define nspr_xhppa_defs_h___

	/*
	* Internal configuration macros
	*/

	#define PR_LINKER_ARCH "hpux"
	#define _PR_SI_SYSNAME "HPUX"
	#ifdef __ia64
	#define _PR_SI_ARCHITECTURE "ia64"
	#define PR_DLL_SUFFIX ".so"
	#else
	/*
	* _PR_SI_ARCHITECTURE must be "hppa1.1" for backward compatibility.
	* It was changed to "hppa" in NSPR 4.6.2, but was changed back in
	* NSPR 4.6.4.
	*/
	#define _PR_SI_ARCHITECTURE "hppa1.1"
	#define PR_DLL_SUFFIX ".sl"
	#endif

	#define _PR_VMBASE 0x30000000
	#define _PR_STACK_VMBASE 0x50000000
	/*
	* _USE_BIG_FDS increases the size of fd_set from 256 bytes to
	* about 7500 bytes. PR_Poll allocates three fd_sets on the
	* stack, so it is safer to also increase the default thread
	* stack size.
	*/
	#define _MD_DEFAULT_STACK_SIZE (2*65536L)
	#define _MD_MINIMUM_STACK_SIZE (2*65536L)
	#define _MD_MMAP_FLAGS MAP_PRIVATE

	#define NEED_TIME_R

	#define HAVE_STACK_GROWING_UP
	#undef HAVE_WEAK_IO_SYMBOLS
	#undef HAVE_WEAK_MALLOC_SYMBOLS
	#define HAVE_DLL
	#ifdef IS_64
	#define USE_DLFCN
	#else
	#define USE_HPSHL
	#endif
	#ifndef HAVE_STRERROR
	#define HAVE_STRERROR
	#endif
	#define _PR_POLL_AVAILABLE
	#define _PR_USE_POLL
	#define _PR_STAT_HAS_ONLY_ST_ATIME
	#define _PR_HAVE_POSIX_SEMAPHORES
	#define PR_HAVE_POSIX_NAMED_SHARED_MEMORY
	#define _PR_ACCEPT_INHERIT_NONBLOCK

	#if defined(__ia64)
	#define _PR_HAVE_ATOMIC_OPS
	#define _MD_INIT_ATOMIC()
	extern PRInt32 _PR_ia64_AtomicIncrement(PRInt32 *val);
	#define _MD_ATOMIC_INCREMENT _PR_ia64_AtomicIncrement
	extern PRInt32 _PR_ia64_AtomicDecrement(PRInt32 *val);
	#define _MD_ATOMIC_DECREMENT _PR_ia64_AtomicDecrement
	extern PRInt32 _PR_ia64_AtomicAdd(PRInt32 *ptr, PRInt32 val);
	#define _MD_ATOMIC_ADD _PR_ia64_AtomicAdd
	extern PRInt32 _PR_ia64_AtomicSet(PRInt32 *val, PRInt32 newval);
	#define _MD_ATOMIC_SET _PR_ia64_AtomicSet
	#endif

	#define _PR_HAVE_GETIPNODEBYNAME
	#define _PR_HAVE_GETIPNODEBYADDR
	#define _PR_HAVE_GETADDRINFO
	#ifdef _PR_INET6
	#define _PR_HAVE_INET_NTOP
	#else
	#define _PR_INET6_PROBE
	#define _PR_HAVE_MD_SOCKADDR_IN6
	/* isomorphic to struct in6_addr on HP-UX B.11.23 */
	struct _md_in6_addr {
	union {
	PRUint8 _S6_u8[16];
	PRUint16 _S6_u16[8];
	PRUint32 _S6_u32[4];
	PRUint32 __S6_align;
	} _s6_un;
	};
	/* isomorphic to struct sockaddr_in6 on HP-UX B.11.23 */
	struct _md_sockaddr_in6 {
	PRUint16 sin6_family;
	PRUint16 sin6_port;
	PRUint32 sin6_flowinfo;
	struct _md_in6_addr sin6_addr;
	PRUint32 sin6_scope_id;
	};
	#endif

	#if !defined(_PR_PTHREADS)

	#include <syscall.h>
	#include <setjmp.h>

	#define USE_SETJMP

	#define _MD_GET_SP(_t) (((int )((_t)->md.jb) + 1))
	#define PR_NUM_GCREGS _JBLEN
	/* Caveat: This makes jmp_buf full of doubles. */
	#define CONTEXT(_th) ((_th)->md.jb)

	/* Stack needs two frames (64 bytes) at the bottom */ \
	#define _MD_SET_THR_SP(_t, _sp) ((_MD_GET_SP(_t)) = (int) (_sp + 64 *2))
	#define SAVE_CONTEXT(_th) _setjmp(CONTEXT(_th))
	#define GOTO_CONTEXT(_th) _longjmp(CONTEXT(_th), 1)

	#if !defined(PTHREADS_USER)

	#define _MD_INIT_CONTEXT(_thread, _sp, _main, status) \
	{ \
	*(status) = PR_TRUE; \
	if (_setjmp(CONTEXT(_thread))) (*_main)(); \
	/* Stack needs two frames (64 bytes) at the bottom */ \
	(_MD_GET_SP(_thread)) = (int) ((_sp) + 64*2); \
	}

	#define _MD_SWITCH_CONTEXT(_thread) \
	if (!_setjmp(CONTEXT(_thread))) { \
	(_thread)->md.errcode = errno; \
	_PR_Schedule(); \
	}

	/*
	** Restore a thread context, saved by _MD_SWITCH_CONTEXT
	*/
	#define _MD_RESTORE_CONTEXT(_thread) \
	{ \
	errno = (_thread)->md.errcode; \
	_MD_SET_CURRENT_THREAD(_thread); \
	_longjmp(CONTEXT(_thread), 1); \
	}

	/* Machine-dependent (MD) data structures. HP-UX has no native threads. */

	struct _MDThread {
	jmp_buf jb;
	int id;
	int errcode;
	};

	struct _MDThreadStack {
	PRInt8 notused;
	};

	struct _MDLock {
	PRInt8 notused;
	};

	struct _MDSemaphore {
	PRInt8 notused;
	};

	struct _MDCVar {
	PRInt8 notused;
	};

	struct _MDSegment {
	PRInt8 notused;
	};

	/*
	* md-specific cpu structure field
	*/
	#define _PR_MD_MAX_OSFD FD_SETSIZE

	struct _MDCPU_Unix {
	PRCList ioQ;
	PRUint32 ioq_timeout;
	PRInt32 ioq_max_osfd;
	PRInt32 ioq_osfd_cnt;
	#ifndef _PR_USE_POLL
	fd_set fd_read_set, fd_write_set, fd_exception_set;
	PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],
	fd_exception_cnt[_PR_MD_MAX_OSFD];
	#else
	struct pollfd *ioq_pollfds;
	int ioq_pollfds_size;
	#endif /* _PR_USE_POLL */
	};

	#define _PR_IOQ(_cpu) ((_cpu)->md.md_unix.ioQ)
	#define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))
	#define _PR_FD_READ_SET(_cpu) ((_cpu)->md.md_unix.fd_read_set)
	#define _PR_FD_READ_CNT(_cpu) ((_cpu)->md.md_unix.fd_read_cnt)
	#define _PR_FD_WRITE_SET(_cpu) ((_cpu)->md.md_unix.fd_write_set)
	#define _PR_FD_WRITE_CNT(_cpu) ((_cpu)->md.md_unix.fd_write_cnt)
	#define _PR_FD_EXCEPTION_SET(_cpu) ((_cpu)->md.md_unix.fd_exception_set)
	#define _PR_FD_EXCEPTION_CNT(_cpu) ((_cpu)->md.md_unix.fd_exception_cnt)
	#define _PR_IOQ_TIMEOUT(_cpu) ((_cpu)->md.md_unix.ioq_timeout)
	#define _PR_IOQ_MAX_OSFD(_cpu) ((_cpu)->md.md_unix.ioq_max_osfd)
	#define _PR_IOQ_OSFD_CNT(_cpu) ((_cpu)->md.md_unix.ioq_osfd_cnt)
	#define _PR_IOQ_POLLFDS(_cpu) ((_cpu)->md.md_unix.ioq_pollfds)
	#define _PR_IOQ_POLLFDS_SIZE(_cpu) ((_cpu)->md.md_unix.ioq_pollfds_size)

	#define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu) 32

	struct _MDCPU {
	struct _MDCPU_Unix md_unix;
	};

	#define _MD_INIT_LOCKS()
	#define _MD_NEW_LOCK(lock) PR_SUCCESS
	#define _MD_FREE_LOCK(lock)
	#define _MD_LOCK(lock)
	#define _MD_UNLOCK(lock)
	#define _MD_INIT_IO()
	#define _MD_IOQ_LOCK()
	#define _MD_IOQ_UNLOCK()

	#define _MD_INIT_RUNNING_CPU(cpu) _MD_unix_init_running_cpu(cpu)
	#define _MD_INIT_THREAD _MD_InitializeThread
	#define _MD_EXIT_THREAD(thread)
	#define _MD_SUSPEND_THREAD(thread) _MD_suspend_thread
	#define _MD_RESUME_THREAD(thread) _MD_resume_thread
	#define _MD_CLEAN_THREAD(_thread)

	#else /* PTHREADS_USER */

	#include "_nspr_pthread.h"

	#endif /* PTHREADS_USER */

	#endif /* !defined(_PR_PTHREADS) */

	#if !defined(PTHREADS_USER)
	#define _MD_EARLY_INIT _MD_EarlyInit
	#define _MD_FINAL_INIT _PR_UnixInit
	#endif

	#if defined(HPUX_LW_TIMER)
	extern void _PR_HPUX_LW_IntervalInit(void);
	extern PRIntervalTime _PR_HPUX_LW_GetInterval(void);
	#define _MD_INTERVAL_INIT _PR_HPUX_LW_IntervalInit
	#define _MD_GET_INTERVAL _PR_HPUX_LW_GetInterval
	#define _MD_INTERVAL_PER_SEC() 1000
	#else
	#define _MD_GET_INTERVAL _PR_UNIX_GetInterval
	#define _MD_INTERVAL_PER_SEC _PR_UNIX_TicksPerSecond
	#endif

	/*
	* We wrapped the select() call. _MD_SELECT refers to the built-in,
	* unwrapped version.
	*/
	#define _MD_SELECT(nfds,r,w,e,tv) syscall(SYS_select,nfds,r,w,e,tv)

	#include <poll.h>
	#define _MD_POLL(fds,nfds,timeout) syscall(SYS_poll,fds,nfds,timeout)

	#ifdef HPUX11
	extern void _MD_hpux_map_sendfile_error(int err);
	#endif /* HPUX11 */

	#endif /* nspr_xhppa_defs_h___ */