| /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape Portable Runtime (NSPR). |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998-2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| /* |
| * |
| * prerr.c |
| * This file is automatically generated; please do not edit it. |
| */ |
| #include "prerror.h" |
| static const struct PRErrorMessage text[] = { |
| {"PR_OUT_OF_MEMORY_ERROR", "Memory allocation attempt failed"}, |
| {"PR_BAD_DESCRIPTOR_ERROR", "Invalid file descriptor"}, |
| {"PR_WOULD_BLOCK_ERROR", "The operation would have blocked"}, |
| {"PR_ACCESS_FAULT_ERROR", "Invalid memory address argument"}, |
| {"PR_INVALID_METHOD_ERROR", "Invalid function for file type"}, |
| {"PR_ILLEGAL_ACCESS_ERROR", "Invalid memory address argument"}, |
| {"PR_UNKNOWN_ERROR", "Some unknown error has occurred"}, |
| {"PR_PENDING_INTERRUPT_ERROR", "Operation interrupted by another thread"}, |
| {"PR_NOT_IMPLEMENTED_ERROR", "function not implemented"}, |
| {"PR_IO_ERROR", "I/O function error"}, |
| {"PR_IO_TIMEOUT_ERROR", "I/O operation timed out"}, |
| {"PR_IO_PENDING_ERROR", "I/O operation on busy file descriptor"}, |
| {"PR_DIRECTORY_OPEN_ERROR", "The directory could not be opened"}, |
| {"PR_INVALID_ARGUMENT_ERROR", "Invalid function argument"}, |
| {"PR_ADDRESS_NOT_AVAILABLE_ERROR", "Network address not available (in use?)"}, |
| {"PR_ADDRESS_NOT_SUPPORTED_ERROR", "Network address type not supported"}, |
| {"PR_IS_CONNECTED_ERROR", "Already connected"}, |
| {"PR_BAD_ADDRESS_ERROR", "Network address is invalid"}, |
| {"PR_ADDRESS_IN_USE_ERROR", "Local Network address is in use"}, |
| {"PR_CONNECT_REFUSED_ERROR", "Connection refused by peer"}, |
| {"PR_NETWORK_UNREACHABLE_ERROR", "Network address is presently unreachable"}, |
| {"PR_CONNECT_TIMEOUT_ERROR", "Connection attempt timed out"}, |
| {"PR_NOT_CONNECTED_ERROR", "Network file descriptor is not connected"}, |
| {"PR_LOAD_LIBRARY_ERROR", "Failure to load dynamic library"}, |
| {"PR_UNLOAD_LIBRARY_ERROR", "Failure to unload dynamic library"}, |
| {"PR_FIND_SYMBOL_ERROR", "Symbol not found in any of the loaded dynamic libraries"}, |
| {"PR_INSUFFICIENT_RESOURCES_ERROR", "Insufficient system resources"}, |
| {"PR_DIRECTORY_LOOKUP_ERROR", "A directory lookup on a network address has failed"}, |
| {"PR_TPD_RANGE_ERROR", "Attempt to access a TPD key that is out of range"}, |
| {"PR_PROC_DESC_TABLE_FULL_ERROR", "Process open FD table is full"}, |
| {"PR_SYS_DESC_TABLE_FULL_ERROR", "System open FD table is full"}, |
| {"PR_NOT_SOCKET_ERROR", "Network operation attempted on non-network file descriptor"}, |
| {"PR_NOT_TCP_SOCKET_ERROR", "TCP-specific function attempted on a non-TCP file descriptor"}, |
| {"PR_SOCKET_ADDRESS_IS_BOUND_ERROR", "TCP file descriptor is already bound"}, |
| {"PR_NO_ACCESS_RIGHTS_ERROR", "Access Denied"}, |
| {"PR_OPERATION_NOT_SUPPORTED_ERROR", "The requested operation is not supported by the platform"}, |
| {"PR_PROTOCOL_NOT_SUPPORTED_ERROR", "The host operating system does not support the protocol requested"}, |
| {"PR_REMOTE_FILE_ERROR", "Access to the remote file has been severed"}, |
| {"PR_BUFFER_OVERFLOW_ERROR", "The value requested is too large to be stored in the data buffer provided"}, |
| {"PR_CONNECT_RESET_ERROR", "TCP connection reset by peer"}, |
| {"PR_RANGE_ERROR", "Unused"}, |
| {"PR_DEADLOCK_ERROR", "The operation would have deadlocked"}, |
| {"PR_FILE_IS_LOCKED_ERROR", "The file is already locked"}, |
| {"PR_FILE_TOO_BIG_ERROR", "Write would result in file larger than the system allows"}, |
| {"PR_NO_DEVICE_SPACE_ERROR", "The device for storing the file is full"}, |
| {"PR_PIPE_ERROR", "Unused"}, |
| {"PR_NO_SEEK_DEVICE_ERROR", "Unused"}, |
| {"PR_IS_DIRECTORY_ERROR", "Cannot perform a normal file operation on a directory"}, |
| {"PR_LOOP_ERROR", "Symbolic link loop"}, |
| {"PR_NAME_TOO_LONG_ERROR", "File name is too long"}, |
| {"PR_FILE_NOT_FOUND_ERROR", "File not found"}, |
| {"PR_NOT_DIRECTORY_ERROR", "Cannot perform directory operation on a normal file"}, |
| {"PR_READ_ONLY_FILESYSTEM_ERROR", "Cannot write to a read-only file system"}, |
| {"PR_DIRECTORY_NOT_EMPTY_ERROR", "Cannot delete a directory that is not empty"}, |
| {"PR_FILESYSTEM_MOUNTED_ERROR", "Cannot delete or rename a file object while the file system is busy"}, |
| {"PR_NOT_SAME_DEVICE_ERROR", "Cannot rename a file to a file system on another device"}, |
| {"PR_DIRECTORY_CORRUPTED_ERROR", "The directory object in the file system is corrupted"}, |
| {"PR_FILE_EXISTS_ERROR", "Cannot create or rename a filename that already exists"}, |
| {"PR_MAX_DIRECTORY_ENTRIES_ERROR", "Directory is full. No additional filenames may be added"}, |
| {"PR_INVALID_DEVICE_STATE_ERROR", "The required device was in an invalid state"}, |
| {"PR_DEVICE_IS_LOCKED_ERROR", "The device is locked"}, |
| {"PR_NO_MORE_FILES_ERROR", "No more entries in the directory"}, |
| {"PR_END_OF_FILE_ERROR", "Encountered end of file"}, |
| {"PR_FILE_SEEK_ERROR", "Seek error"}, |
| {"PR_FILE_IS_BUSY_ERROR", "The file is busy"}, |
| {"PR_OPERATION_ABORTED_ERROR", "The I/O operation was aborted"}, |
| {"PR_IN_PROGRESS_ERROR", "Operation is still in progress (probably a non-blocking connect)"}, |
| {"PR_ALREADY_INITIATED_ERROR", "Operation has already been initiated (probably a non-blocking connect)"}, |
| {"PR_GROUP_EMPTY_ERROR", "The wait group is empty"}, |
| {"PR_INVALID_STATE_ERROR", "Object state improper for request"}, |
| {"PR_NETWORK_DOWN_ERROR", "Network is down"}, |
| {"PR_SOCKET_SHUTDOWN_ERROR", "Socket shutdown"}, |
| {"PR_CONNECT_ABORTED_ERROR", "Connection aborted"}, |
| {"PR_HOST_UNREACHABLE_ERROR", "Host is unreachable"}, |
| {"PR_LIBRARY_NOT_LOADED_ERROR", "The library is not loaded"}, |
| {"PR_CALL_ONCE_ERROR", "The one-time function was previously called and failed. Its error code is no longer available"}, |
| {"PR_MAX_ERROR", "Placeholder for the end of the list"}, |
| {0, 0} |
| }; |
| |
| static const struct PRErrorTable et = { text, "prerr", -6000L, 77 }; |
| |
| void nspr_InitializePRErrorTable(void) { |
| PR_ErrorInstallTable(&et); |
| } |
