blob: 1caaa2759f3f3bfbe347e5f4c689fb78a429bf9a [file] [log] [blame]
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <version.h>
/* Save the parameter pass in by previous boot loader */
.global save_boot_params
save_boot_params:
/* save the parameter here */
/*
* Setup stack for exception, which is located
* at the end of on-chip RAM. We don't expect exception prior to
* relocation and if that happens, we won't worry -- it will overide
* global data region as the code will goto reset. After relocation,
* this region won't be used by other part of program.
* Hence it is safe.
*/
ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
ldr r1, =IRQ_STACK_START_IN
str r0, [r1]
bx lr
/* Set up the platform, once the cpu has been initialized */
.globl lowlevel_init
lowlevel_init:
/* Remap */
#ifdef CONFIG_SPL_BUILD
/*
* SPL : configure the remap (L3 NIC-301 GPV)
* so the on-chip RAM at lower memory instead ROM.
*/
ldr r0, =SOCFPGA_L3REGS_ADDRESS
mov r1, #0x19
str r1, [r0]
#else
/*
* U-Boot : configure the remap (L3 NIC-301 GPV)
* so the SDRAM at lower memory instead on-chip RAM.
*/
ldr r0, =SOCFPGA_L3REGS_ADDRESS
mov r1, #0x2
str r1, [r0]
/* Private components security */
/*
* U-Boot : configure private timer, global timer and cpu
* component access as non secure for kernel stage (as required
* by kernel)
*/
mrc p15,4,r0,c15,c0,0
add r1, r0, #0x54
ldr r2, [r1]
orr r2, r2, #0xff
orr r2, r2, #0xf00
str r2, [r1]
#endif /* #ifdef CONFIG_SPL_BUILD */
mov pc, lr