u-boot-imx/arch/arm/cpu/tegra-common/clock.c - nest-learning-thermostat/5.1.5/u-boot - Git at Google

 /*
  * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */

 /* Tegra SoC common clock control functions */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/clk_rst.h>
 #include <asm/arch-tegra/timer.h>
 #include <div64.h>
 #include <fdtdec.h>

 /*
  * This is our record of the current clock rate of each clock. We don't
  * fill all of these in since we are only really interested in clocks which
  * we use as parents.
  */
 static unsigned pll_rate[CLOCK_ID_COUNT];

 /*
  * The oscillator frequency is fixed to one of four set values. Based on this
  * the other clocks are set up appropriately.
  */
 static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
 	13000000,
 	19200000,
 	12000000,
 	26000000,
 };

 /* return 1 if a peripheral ID is in range */
 #define clock_type_id_isvalid(id) ((id) >= 0 && \
 		(id) < CLOCK_TYPE_COUNT)

 char pllp_valid = 1;	/* PLLP is set up correctly */

 /* return 1 if a periphc_internal_id is in range */
 #define periphc_internal_id_isvalid(id) ((id) >= 0 && \
 		(id) < PERIPHC_COUNT)

 /* number of clock outputs of a PLL */
 static const u8 pll_num_clkouts[] = {
 	1,	/* PLLC */
 	1,	/* PLLM */
 	4,	/* PLLP */
 	1,	/* PLLA */
 	0,	/* PLLU */
 	0,	/* PLLD */
 };

 int clock_get_osc_bypass(void)
 {
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 	u32 reg;

 	reg = readl(&clkrst->crc_osc_ctrl);
 	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
 }

 /* Returns a pointer to the registers of the given pll */
 static struct clk_pll *get_pll(enum clock_id clkid)
 {
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;

 	assert(clock_id_is_pll(clkid));
 	return &clkrst->crc_pll[clkid];
 }

 int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
 		u32 *divp, u32 *cpcon, u32 *lfcon)
 {
 	struct clk_pll *pll = get_pll(clkid);
 	u32 data;

 	assert(clkid != CLOCK_ID_USB);

 	/* Safety check, adds to code size but is small */
 	if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
 		return -1;
 	data = readl(&pll->pll_base);
 	*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
 	*divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
 	*divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
 	data = readl(&pll->pll_misc);
 	*cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
 	*lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;

 	return 0;
 }

 unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
 		u32 divp, u32 cpcon, u32 lfcon)
 {
 	struct clk_pll *pll = get_pll(clkid);
 	u32 data;

 	/*
 	 * We cheat by treating all PLL (except PLLU) in the same fashion.
 	 * This works only because:
 	 * - same fields are always mapped at same offsets, except DCCON
 	 * - DCCON is always 0, doesn't conflict
 	 * - M,N, P of PLLP values are ignored for PLLP
 	 */
 	data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
 	writel(data, &pll->pll_misc);

 	data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
 			(0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);

 	if (clkid == CLOCK_ID_USB)
 		data |= divp << PLLU_VCO_FREQ_SHIFT;
 	else
 		data |= divp << PLL_DIVP_SHIFT;
 	writel(data, &pll->pll_base);

 	/* calculate the stable time */
 	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
 }

 void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
 			unsigned divisor)
 {
 	u32 *reg = get_periph_source_reg(periph_id);
 	u32 value;

 	value = readl(reg);

 	value &= ~OUT_CLK_SOURCE_31_30_MASK;
 	value |= source << OUT_CLK_SOURCE_31_30_SHIFT;

 	value &= ~OUT_CLK_DIVISOR_MASK;
 	value |= divisor << OUT_CLK_DIVISOR_SHIFT;

 	writel(value, reg);
 }

 void clock_ll_set_source(enum periph_id periph_id, unsigned source)
 {
 	u32 *reg = get_periph_source_reg(periph_id);

 	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
 			source << OUT_CLK_SOURCE_31_30_SHIFT);
 }

 /**
  * Given the parent's rate and the required rate for the children, this works
  * out the peripheral clock divider to use, in 7.1 binary format.
  *
  * @param divider_bits	number of divider bits (8 or 16)
  * @param parent_rate	clock rate of parent clock in Hz
  * @param rate		required clock rate for this clock
  * @return divider which should be used
  */
 static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
 			   unsigned long rate)
 {
 	u64 divider = parent_rate * 2;
 	unsigned max_divider = 1 << divider_bits;

 	divider += rate - 1;
 	do_div(divider, rate);

 	if ((s64)divider - 2 < 0)
 		return 0;

 	if ((s64)divider - 2 >= max_divider)
 		return -1;

 	return divider - 2;
 }

 int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
 {
 	struct clk_pll *pll = get_pll(clkid);
 	int data = 0, div = 0, offset = 0;

 	if (!clock_id_is_pll(clkid))
 		return -1;

 	if (pllout + 1 > pll_num_clkouts[clkid])
 		return -1;

 	div = clk_get_divider(8, pll_rate[clkid], rate);

 	if (div < 0)
 		return -1;

 	/* out2 and out4 are in the high part of the register */
 	if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
 		offset = 16;

 	data = (div << PLL_OUT_RATIO_SHIFT) |
 			PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
 	clrsetbits_le32(&pll->pll_out[pllout >> 1],
 			PLL_OUT_RATIO_MASK << offset, data << offset);

 	return 0;
 }

 /**
  * Given the parent's rate and the divider in 7.1 format, this works out the
  * resulting peripheral clock rate.
  *
  * @param parent_rate	clock rate of parent clock in Hz
  * @param divider which should be used in 7.1 format
  * @return effective clock rate of peripheral
  */
 static unsigned long get_rate_from_divider(unsigned long parent_rate,
 					   int divider)
 {
 	u64 rate;

 	rate = (u64)parent_rate * 2;
 	do_div(rate, divider + 2);
 	return rate;
 }

 unsigned long clock_get_periph_rate(enum periph_id periph_id,
 		enum clock_id parent)
 {
 	u32 *reg = get_periph_source_reg(periph_id);

 	return get_rate_from_divider(pll_rate[parent],
 		(readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
 }

 /**
  * Find the best available 7.1 format divisor given a parent clock rate and
  * required child clock rate. This function assumes that a second-stage
  * divisor is available which can divide by powers of 2 from 1 to 256.
  *
  * @param divider_bits	number of divider bits (8 or 16)
  * @param parent_rate	clock rate of parent clock in Hz
  * @param rate		required clock rate for this clock
  * @param extra_div	value for the second-stage divisor (not set if this
  *			function returns -1.
  * @return divider which should be used, or -1 if nothing is valid
  *
  */
 static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
 				unsigned long rate, int *extra_div)
 {
 	int shift;
 	int best_divider = -1;
 	int best_error = rate;

 	/* try dividers from 1 to 256 and find closest match */
 	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
 		unsigned divided_parent = parent_rate >> shift;
 		int divider = clk_get_divider(divider_bits, divided_parent,
 						rate);
 		unsigned effective_rate = get_rate_from_divider(divided_parent,
 						divider);
 		int error = rate - effective_rate;

 		/* Given a valid divider, look for the lowest error */
 		if (divider != -1 && error < best_error) {
 			best_error = error;
 			*extra_div = 1 << shift;
 			best_divider = divider;
 		}
 	}

 	/* return what we found - *extra_div will already be set */
 	return best_divider;
 }

 /**
  * Adjust peripheral PLL to use the given divider and source.
  *
  * @param periph_id	peripheral to adjust
  * @param source	Source number (0-3 or 0-7)
  * @param mux_bits	Number of mux bits (2 or 4)
  * @param divider	Required divider in 7.1 or 15.1 format
  * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
  *		for this peripheral)
  */
 static int adjust_periph_pll(enum periph_id periph_id, int source,
 				int mux_bits, unsigned divider)
 {
 	u32 *reg = get_periph_source_reg(periph_id);

 	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
 			divider << OUT_CLK_DIVISOR_SHIFT);
 	udelay(1);

 	/* work out the source clock and set it */
 	if (source < 0)
 		return -1;

 	switch (mux_bits) {
 	case MASK_BITS_31_30:
 		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
 				source << OUT_CLK_SOURCE_31_30_SHIFT);
 		break;

 	case MASK_BITS_31_29:
 		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK,
 				source << OUT_CLK_SOURCE_31_29_SHIFT);
 		break;

 	case MASK_BITS_31_28:
 		clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK,
 				source << OUT_CLK_SOURCE_31_28_SHIFT);
 		break;

 	default:
 		return -1;
 	}

 	udelay(2);
 	return 0;
 }

 unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
 		enum clock_id parent, unsigned rate, int *extra_div)
 {
 	unsigned effective_rate;
 	int mux_bits, divider_bits, source;
 	int divider;
 	int xdiv = 0;

 	/* work out the source clock and set it */
 	source = get_periph_clock_source(periph_id, parent, &mux_bits,
 					 &divider_bits);

 	divider = find_best_divider(divider_bits, pll_rate[parent],
 				    rate, &xdiv);
 	if (extra_div)
 		*extra_div = xdiv;

 	assert(divider >= 0);
 	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
 		return -1U;
 	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
 		get_periph_source_reg(periph_id),
 		readl(get_periph_source_reg(periph_id)));

 	/* Check what we ended up with. This shouldn't matter though */
 	effective_rate = clock_get_periph_rate(periph_id, parent);
 	if (extra_div)
 		effective_rate /= *extra_div;
 	if (rate != effective_rate)
 		debug("Requested clock rate %u not honored (got %u)\n",
 			rate, effective_rate);
 	return effective_rate;
 }

 unsigned clock_start_periph_pll(enum periph_id periph_id,
 		enum clock_id parent, unsigned rate)
 {
 	unsigned effective_rate;

 	reset_set_enable(periph_id, 1);
 	clock_enable(periph_id);

 	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
 						 NULL);

 	reset_set_enable(periph_id, 0);
 	return effective_rate;
 }

 void clock_enable(enum periph_id clkid)
 {
 	clock_set_enable(clkid, 1);
 }

 void clock_disable(enum periph_id clkid)
 {
 	clock_set_enable(clkid, 0);
 }

 void reset_periph(enum periph_id periph_id, int us_delay)
 {
 	/* Put peripheral into reset */
 	reset_set_enable(periph_id, 1);
 	udelay(us_delay);

 	/* Remove reset */
 	reset_set_enable(periph_id, 0);

 	udelay(us_delay);
 }

 void reset_cmplx_set_enable(int cpu, int which, int reset)
 {
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 	u32 mask;

 	/* Form the mask, which depends on the cpu chosen (2 or 4) */
 	assert(cpu >= 0 && cpu < MAX_NUM_CPU);
 	mask = which << cpu;

 	/* either enable or disable those reset for that CPU */
 	if (reset)
 		writel(mask, &clkrst->crc_cpu_cmplx_set);
 	else
 		writel(mask, &clkrst->crc_cpu_cmplx_clr);
 }

 unsigned clock_get_rate(enum clock_id clkid)
 {
 	struct clk_pll *pll;
 	u32 base;
 	u32 divm;
 	u64 parent_rate;
 	u64 rate;

 	parent_rate = osc_freq[clock_get_osc_freq()];
 	if (clkid == CLOCK_ID_OSC)
 		return parent_rate;

 	pll = get_pll(clkid);
 	base = readl(&pll->pll_base);

 	/* Oh for bf_unpack()... */
 	rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
 	divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
 	if (clkid == CLOCK_ID_USB)
 		divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
 	else
 		divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
 	do_div(rate, divm);
 	return rate;
 }

 /**
  * Set the output frequency you want for each PLL clock.
  * PLL output frequencies are programmed by setting their N, M and P values.
  * The governing equations are:
  *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
  *     where Fo is the output frequency from the PLL.
  * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
  *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
  * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
  *
  * @param n PLL feedback divider(DIVN)
  * @param m PLL input divider(DIVN)
  * @param p post divider(DIVP)
  * @param cpcon base PLL charge pump(CPCON)
  * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
  *		be overriden), 1 if PLL is already correct
  */
 int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
 {
 	u32 base_reg;
 	u32 misc_reg;
 	struct clk_pll *pll;

 	pll = get_pll(clkid);

 	base_reg = readl(&pll->pll_base);

 	/* Set BYPASS, m, n and p to PLL_BASE */
 	base_reg &= ~PLL_DIVM_MASK;
 	base_reg |= m << PLL_DIVM_SHIFT;

 	base_reg &= ~PLL_DIVN_MASK;
 	base_reg |= n << PLL_DIVN_SHIFT;

 	base_reg &= ~PLL_DIVP_MASK;
 	base_reg |= p << PLL_DIVP_SHIFT;

 	if (clkid == CLOCK_ID_PERIPH) {
 		/*
 		 * If the PLL is already set up, check that it is correct
 		 * and record this info for clock_verify() to check.
 		 */
 		if (base_reg & PLL_BASE_OVRRIDE_MASK) {
 			base_reg |= PLL_ENABLE_MASK;
 			if (base_reg != readl(&pll->pll_base))
 				pllp_valid = 0;
 			return pllp_valid ? 1 : -1;
 		}
 		base_reg |= PLL_BASE_OVRRIDE_MASK;
 	}

 	base_reg |= PLL_BYPASS_MASK;
 	writel(base_reg, &pll->pll_base);

 	/* Set cpcon to PLL_MISC */
 	misc_reg = readl(&pll->pll_misc);
 	misc_reg &= ~PLL_CPCON_MASK;
 	misc_reg |= cpcon << PLL_CPCON_SHIFT;
 	writel(misc_reg, &pll->pll_misc);

 	/* Enable PLL */
 	base_reg |= PLL_ENABLE_MASK;
 	writel(base_reg, &pll->pll_base);

 	/* Disable BYPASS */
 	base_reg &= ~PLL_BYPASS_MASK;
 	writel(base_reg, &pll->pll_base);

 	return 0;
 }

 void clock_ll_start_uart(enum periph_id periph_id)
 {
 	/* Assert UART reset and enable clock */
 	reset_set_enable(periph_id, 1);
 	clock_enable(periph_id);
 	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */

 	/* wait for 2us */
 	udelay(2);

 	/* De-assert reset to UART */
 	reset_set_enable(periph_id, 0);
 }

 #ifdef CONFIG_OF_CONTROL
 int clock_decode_periph_id(const void *blob, int node)
 {
 	enum periph_id id;
 	u32 cell[2];
 	int err;

 	err = fdtdec_get_int_array(blob, node, "clocks", cell,
 				   ARRAY_SIZE(cell));
 	if (err)
 		return -1;
 	id = clk_id_to_periph_id(cell[1]);
 	assert(clock_periph_id_isvalid(id));
 	return id;
 }
 #endif /* CONFIG_OF_CONTROL */

 int clock_verify(void)
 {
 	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
 	u32 reg = readl(&pll->pll_base);

 	if (!pllp_valid) {
 		printf("Warning: PLLP %x is not correct\n", reg);
 		return -1;
 	}
 	debug("PLLP %x is correct\n", reg);
 	return 0;
 }

 void clock_init(void)
 {
 	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
 	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
 	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
 	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
 	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
 	pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
 	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
 	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
 	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
 	debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
 	debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);

 	/* Do any special system timer/TSC setup */
 	arch_timer_init();
 }

 static void set_avp_clock_source(u32 src)
 {
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 	u32 val;

 	val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
 		(src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
 		(src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
 		(src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
 		(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
 	writel(val, &clkrst->crc_sclk_brst_pol);
 	udelay(3);
 }

 /*
  * This function is useful on Tegra30, and any later SoCs that have compatible
  * PLLP configuration registers.
  */
 void tegra30_set_up_pllp(void)
 {
 	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 	u32 reg;

 	/*
 	 * Based on the Tegra TRM, the system clock (which is the AVP clock) can
 	 * run up to 275MHz. On power on, the default sytem clock source is set
 	 * to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to
 	 * 408MHz which is beyond system clock's upper limit.
 	 *
 	 * The fix is to set the system clock to CLK_M before initializing PLLP,
 	 * and then switch back to PLLP_OUT4, which has an appropriate divider
 	 * configured, after PLLP has been configured
 	 */
 	set_avp_clock_source(SCLK_SOURCE_CLKM);

 	/*
 	 * PLLP output frequency set to 408Mhz
 	 * PLLC output frequency set to 228Mhz
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
 		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
 		break;

 	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
 		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
 		break;

 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
 		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		break;
 	case CLOCK_OSC_FREQ_19_2:
 	default:
 		/*
 		 * These are not supported. It is too early to print a
 		 * message and the UART likely won't work anyway due to the
 		 * oscillator being wrong.
 		 */
 		break;
 	}

 	/* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */

 	/* OUT1, 2 */
 	/* Assert RSTN before enable */
 	reg = PLLP_OUT2_RSTN_EN | PLLP_OUT1_RSTN_EN;
 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
 	/* Set divisor and reenable */
 	reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO)
 		| PLLP_OUT2_OVR | PLLP_OUT2_CLKEN | PLLP_OUT2_RSTN_DIS
 		| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
 		| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);

 	/* OUT3, 4 */
 	/* Assert RSTN before enable */
 	reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
 	/* Set divisor and reenable */
 	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
 		| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
 		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
 		| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);

 	set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4);
 }
	/*
	* Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	*/

	/* Tegra SoC common clock control functions */

	#include <common.h>
	#include <asm/io.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/tegra.h>
	#include <asm/arch-tegra/clk_rst.h>
	#include <asm/arch-tegra/timer.h>
	#include <div64.h>
	#include <fdtdec.h>

	/*
	* This is our record of the current clock rate of each clock. We don't
	* fill all of these in since we are only really interested in clocks which
	* we use as parents.
	*/
	static unsigned pll_rate[CLOCK_ID_COUNT];

	/*
	* The oscillator frequency is fixed to one of four set values. Based on this
	* the other clocks are set up appropriately.
	*/
	static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
	13000000,
	19200000,
	12000000,
	26000000,
	};

	/* return 1 if a peripheral ID is in range */
	#define clock_type_id_isvalid(id) ((id) >= 0 && \
	(id) < CLOCK_TYPE_COUNT)

	char pllp_valid = 1; /* PLLP is set up correctly */

	/* return 1 if a periphc_internal_id is in range */
	#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
	(id) < PERIPHC_COUNT)

	/* number of clock outputs of a PLL */
	static const u8 pll_num_clkouts[] = {
	1, /* PLLC */
	1, /* PLLM */
	4, /* PLLP */
	1, /* PLLA */
	0, /* PLLU */
	0, /* PLLD */
	};

	int clock_get_osc_bypass(void)
	{
	struct clk_rst_ctlr *clkrst =
	(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
	u32 reg;

	reg = readl(&clkrst->crc_osc_ctrl);
	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
	}

	/* Returns a pointer to the registers of the given pll */
	static struct clk_pll *get_pll(enum clock_id clkid)
	{
	struct clk_rst_ctlr *clkrst =
	(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;

	assert(clock_id_is_pll(clkid));
	return &clkrst->crc_pll[clkid];
	}

	int clock_ll_read_pll(enum clock_id clkid, u32 divm, u32 divn,
	u32 divp, u32 cpcon, u32 *lfcon)
	{
	struct clk_pll *pll = get_pll(clkid);
	u32 data;

	assert(clkid != CLOCK_ID_USB);

	/* Safety check, adds to code size but is small */
	if (!clock_id_is_pll(clkid) \|\| clkid == CLOCK_ID_USB)
	return -1;
	data = readl(&pll->pll_base);
	*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
	*divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
	*divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
	data = readl(&pll->pll_misc);
	*cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
	*lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;

	return 0;
	}

	unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
	u32 divp, u32 cpcon, u32 lfcon)
	{
	struct clk_pll *pll = get_pll(clkid);
	u32 data;

	/*
	* We cheat by treating all PLL (except PLLU) in the same fashion.
	* This works only because:
	* - same fields are always mapped at same offsets, except DCCON
	* - DCCON is always 0, doesn't conflict
	* - M,N, P of PLLP values are ignored for PLLP
	*/
	data = (cpcon << PLL_CPCON_SHIFT) \| (lfcon << PLL_LFCON_SHIFT);
	writel(data, &pll->pll_misc);

	data = (divm << PLL_DIVM_SHIFT) \| (divn << PLL_DIVN_SHIFT) \|
	(0 << PLL_BYPASS_SHIFT) \| (1 << PLL_ENABLE_SHIFT);

	if (clkid == CLOCK_ID_USB)
	data \|= divp << PLLU_VCO_FREQ_SHIFT;
	else
	data \|= divp << PLL_DIVP_SHIFT;
	writel(data, &pll->pll_base);

	/* calculate the stable time */
	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
	}

	void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
	unsigned divisor)
	{
	u32 *reg = get_periph_source_reg(periph_id);
	u32 value;

	value = readl(reg);

	value &= ~OUT_CLK_SOURCE_31_30_MASK;
	value \|= source << OUT_CLK_SOURCE_31_30_SHIFT;

	value &= ~OUT_CLK_DIVISOR_MASK;
	value \|= divisor << OUT_CLK_DIVISOR_SHIFT;

	writel(value, reg);
	}

	void clock_ll_set_source(enum periph_id periph_id, unsigned source)
	{
	u32 *reg = get_periph_source_reg(periph_id);

	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
	source << OUT_CLK_SOURCE_31_30_SHIFT);
	}

	/**
	* Given the parent's rate and the required rate for the children, this works
	* out the peripheral clock divider to use, in 7.1 binary format.
	*
	* @param divider_bits number of divider bits (8 or 16)
	* @param parent_rate clock rate of parent clock in Hz
	* @param rate required clock rate for this clock
	* @return divider which should be used
	*/
	static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
	unsigned long rate)
	{
	u64 divider = parent_rate * 2;
	unsigned max_divider = 1 << divider_bits;

	divider += rate - 1;
	do_div(divider, rate);

	if ((s64)divider - 2 < 0)
	return 0;

	if ((s64)divider - 2 >= max_divider)
	return -1;

	return divider - 2;
	}

	int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
	{
	struct clk_pll *pll = get_pll(clkid);
	int data = 0, div = 0, offset = 0;

	if (!clock_id_is_pll(clkid))
	return -1;

	if (pllout + 1 > pll_num_clkouts[clkid])
	return -1;

	div = clk_get_divider(8, pll_rate[clkid], rate);

	if (div < 0)
	return -1;

	/* out2 and out4 are in the high part of the register */
	if (pllout == PLL_OUT2 \|\| pllout == PLL_OUT4)
	offset = 16;

	data = (div << PLL_OUT_RATIO_SHIFT) \|
	PLL_OUT_OVRRIDE \| PLL_OUT_CLKEN \| PLL_OUT_RSTN;
	clrsetbits_le32(&pll->pll_out[pllout >> 1],
	PLL_OUT_RATIO_MASK << offset, data << offset);

	return 0;
	}

	/**
	* Given the parent's rate and the divider in 7.1 format, this works out the
	* resulting peripheral clock rate.
	*
	* @param parent_rate clock rate of parent clock in Hz
	* @param divider which should be used in 7.1 format
	* @return effective clock rate of peripheral
	*/
	static unsigned long get_rate_from_divider(unsigned long parent_rate,
	int divider)
	{
	u64 rate;

	rate = (u64)parent_rate * 2;
	do_div(rate, divider + 2);
	return rate;
	}

	unsigned long clock_get_periph_rate(enum periph_id periph_id,
	enum clock_id parent)
	{
	u32 *reg = get_periph_source_reg(periph_id);

	return get_rate_from_divider(pll_rate[parent],
	(readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
	}

	/**
	* Find the best available 7.1 format divisor given a parent clock rate and
	* required child clock rate. This function assumes that a second-stage
	* divisor is available which can divide by powers of 2 from 1 to 256.
	*
	* @param divider_bits number of divider bits (8 or 16)
	* @param parent_rate clock rate of parent clock in Hz
	* @param rate required clock rate for this clock
	* @param extra_div value for the second-stage divisor (not set if this
	* function returns -1.
	* @return divider which should be used, or -1 if nothing is valid
	*
	*/
	static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
	unsigned long rate, int *extra_div)
	{
	int shift;
	int best_divider = -1;
	int best_error = rate;

	/* try dividers from 1 to 256 and find closest match */
	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
	unsigned divided_parent = parent_rate >> shift;
	int divider = clk_get_divider(divider_bits, divided_parent,
	rate);
	unsigned effective_rate = get_rate_from_divider(divided_parent,
	divider);
	int error = rate - effective_rate;

	/* Given a valid divider, look for the lowest error */
	if (divider != -1 && error < best_error) {
	best_error = error;
	*extra_div = 1 << shift;
	best_divider = divider;
	}
	}

	/* return what we found - extra_div will already be set /
	return best_divider;
	}

	/**
	* Adjust peripheral PLL to use the given divider and source.
	*
	* @param periph_id peripheral to adjust
	* @param source Source number (0-3 or 0-7)
	* @param mux_bits Number of mux bits (2 or 4)
	* @param divider Required divider in 7.1 or 15.1 format
	* @return 0 if ok, -1 on error (requesting a parent clock which is not valid
	* for this peripheral)
	*/
	static int adjust_periph_pll(enum periph_id periph_id, int source,
	int mux_bits, unsigned divider)
	{
	u32 *reg = get_periph_source_reg(periph_id);

	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
	divider << OUT_CLK_DIVISOR_SHIFT);
	udelay(1);

	/* work out the source clock and set it */
	if (source < 0)
	return -1;

	switch (mux_bits) {
	case MASK_BITS_31_30:
	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
	source << OUT_CLK_SOURCE_31_30_SHIFT);
	break;

	case MASK_BITS_31_29:
	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK,
	source << OUT_CLK_SOURCE_31_29_SHIFT);
	break;

	case MASK_BITS_31_28:
	clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK,
	source << OUT_CLK_SOURCE_31_28_SHIFT);
	break;

	default:
	return -1;
	}

	udelay(2);
	return 0;
	}

	unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
	enum clock_id parent, unsigned rate, int *extra_div)
	{
	unsigned effective_rate;
	int mux_bits, divider_bits, source;
	int divider;
	int xdiv = 0;

	/* work out the source clock and set it */
	source = get_periph_clock_source(periph_id, parent, &mux_bits,
	&divider_bits);

	divider = find_best_divider(divider_bits, pll_rate[parent],
	rate, &xdiv);
	if (extra_div)
	*extra_div = xdiv;

	assert(divider >= 0);
	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
	return -1U;
	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
	get_periph_source_reg(periph_id),
	readl(get_periph_source_reg(periph_id)));

	/* Check what we ended up with. This shouldn't matter though */
	effective_rate = clock_get_periph_rate(periph_id, parent);
	if (extra_div)
	effective_rate /= *extra_div;
	if (rate != effective_rate)
	debug("Requested clock rate %u not honored (got %u)\n",
	rate, effective_rate);
	return effective_rate;
	}

	unsigned clock_start_periph_pll(enum periph_id periph_id,
	enum clock_id parent, unsigned rate)
	{
	unsigned effective_rate;

	reset_set_enable(periph_id, 1);
	clock_enable(periph_id);

	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
	NULL);

	reset_set_enable(periph_id, 0);
	return effective_rate;
	}

	void clock_enable(enum periph_id clkid)
	{
	clock_set_enable(clkid, 1);
	}

	void clock_disable(enum periph_id clkid)
	{
	clock_set_enable(clkid, 0);
	}

	void reset_periph(enum periph_id periph_id, int us_delay)
	{
	/* Put peripheral into reset */
	reset_set_enable(periph_id, 1);
	udelay(us_delay);

	/* Remove reset */
	reset_set_enable(periph_id, 0);

	udelay(us_delay);
	}

	void reset_cmplx_set_enable(int cpu, int which, int reset)
	{
	struct clk_rst_ctlr *clkrst =
	(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
	u32 mask;

	/* Form the mask, which depends on the cpu chosen (2 or 4) */
	assert(cpu >= 0 && cpu < MAX_NUM_CPU);
	mask = which << cpu;

	/* either enable or disable those reset for that CPU */
	if (reset)
	writel(mask, &clkrst->crc_cpu_cmplx_set);
	else
	writel(mask, &clkrst->crc_cpu_cmplx_clr);
	}

	unsigned clock_get_rate(enum clock_id clkid)
	{
	struct clk_pll *pll;
	u32 base;
	u32 divm;
	u64 parent_rate;
	u64 rate;

	parent_rate = osc_freq[clock_get_osc_freq()];
	if (clkid == CLOCK_ID_OSC)
	return parent_rate;

	pll = get_pll(clkid);
	base = readl(&pll->pll_base);

	/* Oh for bf_unpack()... */
	rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
	divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
	if (clkid == CLOCK_ID_USB)
	divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
	else
	divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
	do_div(rate, divm);
	return rate;
	}

	/**
	* Set the output frequency you want for each PLL clock.
	* PLL output frequencies are programmed by setting their N, M and P values.
	* The governing equations are:
	* VCO = (Fi / m) * n, Fo = VCO / (2^p)
	* where Fo is the output frequency from the PLL.
	* Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
	* 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
	* Please see Tegra TRM section 5.3 to get the detail for PLL Programming
	*
	* @param n PLL feedback divider(DIVN)
	* @param m PLL input divider(DIVN)
	* @param p post divider(DIVP)
	* @param cpcon base PLL charge pump(CPCON)
	* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
	* be overriden), 1 if PLL is already correct
	*/
	int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
	{
	u32 base_reg;
	u32 misc_reg;
	struct clk_pll *pll;

	pll = get_pll(clkid);

	base_reg = readl(&pll->pll_base);

	/* Set BYPASS, m, n and p to PLL_BASE */
	base_reg &= ~PLL_DIVM_MASK;
	base_reg \|= m << PLL_DIVM_SHIFT;

	base_reg &= ~PLL_DIVN_MASK;
	base_reg \|= n << PLL_DIVN_SHIFT;

	base_reg &= ~PLL_DIVP_MASK;
	base_reg \|= p << PLL_DIVP_SHIFT;

	if (clkid == CLOCK_ID_PERIPH) {
	/*
	* If the PLL is already set up, check that it is correct
	* and record this info for clock_verify() to check.
	*/
	if (base_reg & PLL_BASE_OVRRIDE_MASK) {
	base_reg \|= PLL_ENABLE_MASK;
	if (base_reg != readl(&pll->pll_base))
	pllp_valid = 0;
	return pllp_valid ? 1 : -1;
	}
	base_reg \|= PLL_BASE_OVRRIDE_MASK;
	}

	base_reg \|= PLL_BYPASS_MASK;
	writel(base_reg, &pll->pll_base);

	/* Set cpcon to PLL_MISC */
	misc_reg = readl(&pll->pll_misc);
	misc_reg &= ~PLL_CPCON_MASK;
	misc_reg \|= cpcon << PLL_CPCON_SHIFT;
	writel(misc_reg, &pll->pll_misc);

	/* Enable PLL */
	base_reg \|= PLL_ENABLE_MASK;
	writel(base_reg, &pll->pll_base);

	/* Disable BYPASS */
	base_reg &= ~PLL_BYPASS_MASK;
	writel(base_reg, &pll->pll_base);

	return 0;
	}

	void clock_ll_start_uart(enum periph_id periph_id)
	{
	/* Assert UART reset and enable clock */
	reset_set_enable(periph_id, 1);
	clock_enable(periph_id);
	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */

	/* wait for 2us */
	udelay(2);

	/* De-assert reset to UART */
	reset_set_enable(periph_id, 0);
	}

	#ifdef CONFIG_OF_CONTROL
	int clock_decode_periph_id(const void *blob, int node)
	{
	enum periph_id id;
	u32 cell[2];
	int err;

	err = fdtdec_get_int_array(blob, node, "clocks", cell,
	ARRAY_SIZE(cell));
	if (err)
	return -1;
	id = clk_id_to_periph_id(cell[1]);
	assert(clock_periph_id_isvalid(id));
	return id;
	}
	#endif /* CONFIG_OF_CONTROL */

	int clock_verify(void)
	{
	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
	u32 reg = readl(&pll->pll_base);

	if (!pllp_valid) {
	printf("Warning: PLLP %x is not correct\n", reg);
	return -1;
	}
	debug("PLLP %x is correct\n", reg);
	return 0;
	}

	void clock_init(void)
	{
	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
	pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
	debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
	debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);

	/* Do any special system timer/TSC setup */
	arch_timer_init();
	}

	static void set_avp_clock_source(u32 src)
	{
	struct clk_rst_ctlr *clkrst =
	(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
	u32 val;

	val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) \|
	(src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) \|
	(src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) \|
	(src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) \|
	(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
	writel(val, &clkrst->crc_sclk_brst_pol);
	udelay(3);
	}

	/*
	* This function is useful on Tegra30, and any later SoCs that have compatible
	* PLLP configuration registers.
	*/
	void tegra30_set_up_pllp(void)
	{
	struct clk_rst_ctlr clkrst = (struct clk_rst_ctlr )NV_PA_CLK_RST_BASE;
	u32 reg;

	/*
	* Based on the Tegra TRM, the system clock (which is the AVP clock) can
	* run up to 275MHz. On power on, the default sytem clock source is set
	* to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to
	* 408MHz which is beyond system clock's upper limit.
	*
	* The fix is to set the system clock to CLK_M before initializing PLLP,
	* and then switch back to PLLP_OUT4, which has an appropriate divider
	* configured, after PLLP has been configured
	*/
	set_avp_clock_source(SCLK_SOURCE_CLKM);

	/*
	* PLLP output frequency set to 408Mhz
	* PLLC output frequency set to 228Mhz
	*/
	switch (clock_get_osc_freq()) {
	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
	clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
	clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
	break;

	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
	clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
	clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
	break;

	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
	clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
	clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
	break;
	case CLOCK_OSC_FREQ_19_2:
	default:
	/*
	* These are not supported. It is too early to print a
	* message and the UART likely won't work anyway due to the
	* oscillator being wrong.
	*/
	break;
	}

	/* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */

	/* OUT1, 2 */
	/* Assert RSTN before enable */
	reg = PLLP_OUT2_RSTN_EN \| PLLP_OUT1_RSTN_EN;
	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
	/* Set divisor and reenable */
	reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO)
	\| PLLP_OUT2_OVR \| PLLP_OUT2_CLKEN \| PLLP_OUT2_RSTN_DIS
	\| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
	\| PLLP_OUT1_OVR \| PLLP_OUT1_CLKEN \| PLLP_OUT1_RSTN_DIS;
	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);

	/* OUT3, 4 */
	/* Assert RSTN before enable */
	reg = PLLP_OUT4_RSTN_EN \| PLLP_OUT3_RSTN_EN;
	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
	/* Set divisor and reenable */
	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
	\| PLLP_OUT4_OVR \| PLLP_OUT4_CLKEN \| PLLP_OUT4_RSTN_DIS
	\| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
	\| PLLP_OUT3_OVR \| PLLP_OUT3_CLKEN \| PLLP_OUT3_RSTN_DIS;
	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);

	set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4);
	}