# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = dselect/methods
DIST_COMMON = $(nobase_dist_methods_DATA) \
	$(nobase_dist_methods_SCRIPTS) $(nobase_dist_perllib_DATA) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
	$(top_srcdir)/m4/dpkg-build.m4 \
	$(top_srcdir)/m4/dpkg-compiler.m4 \
	$(top_srcdir)/m4/dpkg-coverage.m4 \
	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
	$(top_srcdir)/m4/dpkg-types.m4 \
	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" \
	"$(DESTDIR)$(perllibdir)"
SCRIPTS = $(nobase_dist_methods_SCRIPTS)
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
DATA = $(nobase_dist_methods_DATA) $(nobase_dist_perllib_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BZ2_LIBS = @BZ2_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURSES_LIBS = @CURSES_LIBS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GCOV = @GCOV@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
HAVE_DOT = @HAVE_DOT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LCOV = @LCOV@
LCOV_GENHTML = @LCOV_GENHTML@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_COVER = @PERL_COVER@
PERL_COVERAGE = @PERL_COVERAGE@
PERL_LIBDIR = @PERL_LIBDIR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PO4A = @PO4A@
POD2MAN = @POD2MAN@
POSUB = @POSUB@
RANLIB = @RANLIB@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSD_LIBS = @SSD_LIBS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
USE_PO4A = @USE_PO4A@
USE_UNICODE = @USE_UNICODE@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
admindir = @admindir@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
logdir = @logdir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
methodsdir = $(pkglibdir)/methods
nobase_dist_methods_DATA = \
	disk/names \
	disk/desc.cdrom \
	disk/desc.nfs \
	disk/desc.harddisk \
	disk/desc.mounted \
	floppy/names \
	floppy/desc.floppy \
	ftp/names \
	ftp/desc.ftp \
	ftp/README.mirrors.txt \
	multicd/names \
	multicd/desc.multi_cd \
	multicd/desc.multi_mount \
	multicd/desc.multi_nfs

nobase_dist_methods_SCRIPTS = \
	disk/setup \
	disk/update \
	disk/install \
	floppy/setup \
	floppy/update \
	floppy/install \
	ftp/setup \
	ftp/update \
	ftp/install \
	multicd/setup \
	multicd/update \
	multicd/install

perllibdir = $(PERL_LIBDIR)
nobase_dist_perllib_DATA = Debian/Dselect/Ftp.pm
EXTRA_DIST = multicd/README.multicd
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dselect/methods/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign dselect/methods/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-nobase_dist_methodsSCRIPTS: $(nobase_dist_methods_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(methodsdir)" || $(MKDIR_P) "$(DESTDIR)$(methodsdir)"
	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || list=; \
	$(am__nobase_strip_setup); \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	  case $$type in \
	  d) echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
	     $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?;; \
	  f) \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(methodsdir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(methodsdir)$$dir" || exit $$?; \
	     } \
	  ;; esac \
	; done

uninstall-nobase_dist_methodsSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || exit 0; \
	$(am__nobase_strip_setup); \
	files=`$(am__nobase_strip) \
	       -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(methodsdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(methodsdir)" && rm -f $$files
install-nobase_dist_methodsDATA: $(nobase_dist_methods_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(methodsdir)" || $(MKDIR_P) "$(DESTDIR)$(methodsdir)"
	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(methodsdir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_methodsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(methodsdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(methodsdir)" && rm -f $$files
install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_perllibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(perllibdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(perllibdir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(perllibdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-nobase_dist_methodsDATA \
	install-nobase_dist_methodsSCRIPTS \
	install-nobase_dist_perllibDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-nobase_dist_methodsDATA \
	uninstall-nobase_dist_methodsSCRIPTS \
	uninstall-nobase_dist_perllibDATA

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-nobase_dist_methodsDATA \
	install-nobase_dist_methodsSCRIPTS \
	install-nobase_dist_perllibDATA install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am \
	uninstall-nobase_dist_methodsDATA \
	uninstall-nobase_dist_methodsSCRIPTS \
	uninstall-nobase_dist_perllibDATA


install-data-local:
	$(mkdir_p) $(DESTDIR)$(admindir)/methods/mnt
	$(mkdir_p) $(DESTDIR)$(admindir)/methods/disk
	$(mkdir_p) $(DESTDIR)$(admindir)/methods/floppy
	$(mkdir_p) $(DESTDIR)$(admindir)/methods/ftp
	$(mkdir_p) $(DESTDIR)$(admindir)/methods/multicd

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: