| SSH_CONFIG(5) OpenBSD Programmer's Manual SSH_CONFIG(5) |
| |
| NAME |
| ssh_config - OpenSSH SSH client configuration files |
| |
| SYNOPSIS |
| ~/.ssh/config |
| /etc/ssh/ssh_config |
| |
| DESCRIPTION |
| ssh(1) obtains configuration data from the following sources in the |
| following order: |
| |
| 1. command-line options |
| 2. user's configuration file (~/.ssh/config) |
| 3. system-wide configuration file (/etc/ssh/ssh_config) |
| |
| For each parameter, the first obtained value will be used. The |
| configuration files contain sections separated by ``Host'' |
| specifications, and that section is only applied for hosts that match one |
| of the patterns given in the specification. The matched host name is the |
| one given on the command line. |
| |
| Since the first obtained value for each parameter is used, more host- |
| specific declarations should be given near the beginning of the file, and |
| general defaults at the end. |
| |
| The configuration file has the following format: |
| |
| Empty lines and lines starting with `#' are comments. Otherwise a line |
| is of the format ``keyword arguments''. Configuration options may be |
| separated by whitespace or optional whitespace and exactly one `='; the |
| latter format is useful to avoid the need to quote whitespace when |
| specifying configuration options using the ssh, scp, and sftp -o option. |
| Arguments may optionally be enclosed in double quotes (") in order to |
| represent arguments containing spaces. |
| |
| The possible keywords and their meanings are as follows (note that |
| keywords are case-insensitive and arguments are case-sensitive): |
| |
| Host Restricts the following declarations (up to the next Host |
| keyword) to be only for those hosts that match one of the |
| patterns given after the keyword. If more than one pattern is |
| provided, they should be separated by whitespace. A single `*' |
| as a pattern can be used to provide global defaults for all |
| hosts. The host is the hostname argument given on the command |
| line (i.e. the name is not converted to a canonicalized host name |
| before matching). |
| |
| A pattern entry may be negated by prefixing it with an |
| exclamation mark (`!'). If a negated entry is matched, then the |
| Host entry is ignored, regardless of whether any other patterns |
| on the line match. Negated matches are therefore useful to |
| provide exceptions for wildcard matches. |
| |
| See PATTERNS for more information on patterns. |
| |
| AddressFamily |
| Specifies which address family to use when connecting. Valid |
| arguments are ``any'', ``inet'' (use IPv4 only), or ``inet6'' |
| (use IPv6 only). |
| |
| BatchMode |
| If set to ``yes'', passphrase/password querying will be disabled. |
| This option is useful in scripts and other batch jobs where no |
| user is present to supply the password. The argument must be |
| ``yes'' or ``no''. The default is ``no''. |
| |
| BindAddress |
| Use the specified address on the local machine as the source |
| address of the connection. Only useful on systems with more than |
| one address. Note that this option does not work if |
| UsePrivilegedPort is set to ``yes''. |
| |
| ChallengeResponseAuthentication |
| Specifies whether to use challenge-response authentication. The |
| argument to this keyword must be ``yes'' or ``no''. The default |
| is ``yes''. |
| |
| CheckHostIP |
| If this flag is set to ``yes'', ssh(1) will additionally check |
| the host IP address in the known_hosts file. This allows ssh to |
| detect if a host key changed due to DNS spoofing. If the option |
| is set to ``no'', the check will not be executed. The default is |
| ``yes''. |
| |
| Cipher Specifies the cipher to use for encrypting the session in |
| protocol version 1. Currently, ``blowfish'', ``3des'', and |
| ``des'' are supported. des is only supported in the ssh(1) |
| client for interoperability with legacy protocol 1 |
| implementations that do not support the 3des cipher. Its use is |
| strongly discouraged due to cryptographic weaknesses. The |
| default is ``3des''. |
| |
| Ciphers |
| Specifies the ciphers allowed for protocol version 2 in order of |
| preference. Multiple ciphers must be comma-separated. The |
| supported ciphers are ``3des-cbc'', ``aes128-cbc'', |
| ``aes192-cbc'', ``aes256-cbc'', ``aes128-ctr'', ``aes192-ctr'', |
| ``aes256-ctr'', ``arcfour128'', ``arcfour256'', ``arcfour'', |
| ``blowfish-cbc'', and ``cast128-cbc''. The default is: |
| |
| aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128, |
| aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc, |
| aes256-cbc,arcfour |
| |
| ClearAllForwardings |
| Specifies that all local, remote, and dynamic port forwardings |
| specified in the configuration files or on the command line be |
| cleared. This option is primarily useful when used from the |
| ssh(1) command line to clear port forwardings set in |
| configuration files, and is automatically set by scp(1) and |
| sftp(1). The argument must be ``yes'' or ``no''. The default is |
| ``no''. |
| |
| Compression |
| Specifies whether to use compression. The argument must be |
| ``yes'' or ``no''. The default is ``no''. |
| |
| CompressionLevel |
| Specifies the compression level to use if compression is enabled. |
| The argument must be an integer from 1 (fast) to 9 (slow, best). |
| The default level is 6, which is good for most applications. The |
| meaning of the values is the same as in gzip(1). Note that this |
| option applies to protocol version 1 only. |
| |
| ConnectionAttempts |
| Specifies the number of tries (one per second) to make before |
| exiting. The argument must be an integer. This may be useful in |
| scripts if the connection sometimes fails. The default is 1. |
| |
| ConnectTimeout |
| Specifies the timeout (in seconds) used when connecting to the |
| SSH server, instead of using the default system TCP timeout. |
| This value is used only when the target is down or really |
| unreachable, not when it refuses the connection. |
| |
| ControlMaster |
| Enables the sharing of multiple sessions over a single network |
| connection. When set to ``yes'', ssh(1) will listen for |
| connections on a control socket specified using the ControlPath |
| argument. Additional sessions can connect to this socket using |
| the same ControlPath with ControlMaster set to ``no'' (the |
| default). These sessions will try to reuse the master instance's |
| network connection rather than initiating new ones, but will fall |
| back to connecting normally if the control socket does not exist, |
| or is not listening. |
| |
| Setting this to ``ask'' will cause ssh to listen for control |
| connections, but require confirmation using the SSH_ASKPASS |
| program before they are accepted (see ssh-add(1) for details). |
| If the ControlPath cannot be opened, ssh will continue without |
| connecting to a master instance. |
| |
| X11 and ssh-agent(1) forwarding is supported over these |
| multiplexed connections, however the display and agent forwarded |
| will be the one belonging to the master connection i.e. it is not |
| possible to forward multiple displays or agents. |
| |
| Two additional options allow for opportunistic multiplexing: try |
| to use a master connection but fall back to creating a new one if |
| one does not already exist. These options are: ``auto'' and |
| ``autoask''. The latter requires confirmation like the ``ask'' |
| option. |
| |
| ControlPath |
| Specify the path to the control socket used for connection |
| sharing as described in the ControlMaster section above or the |
| string ``none'' to disable connection sharing. In the path, `%L' |
| will be substituted by the first component of the local host |
| name, `%l' will be substituted by the local host name (including |
| any domain name), `%h' will be substituted by the target host |
| name, `%n' will be substituted by the original target host name |
| specified on the command line, `%p' the port, `%r' by the remote |
| login username, and `%u' by the username of the user running |
| ssh(1). It is recommended that any ControlPath used for |
| opportunistic connection sharing include at least %h, %p, and %r. |
| This ensures that shared connections are uniquely identified. |
| |
| ControlPersist |
| When used in conjunction with ControlMaster, specifies that the |
| master connection should remain open in the background (waiting |
| for future client connections) after the initial client |
| connection has been closed. If set to ``no'', then the master |
| connection will not be placed into the background, and will close |
| as soon as the initial client connection is closed. If set to |
| ``yes'', then the master connection will remain in the background |
| indefinitely (until killed or closed via a mechanism such as the |
| ssh(1) ``-O exit'' option). If set to a time in seconds, or a |
| time in any of the formats documented in sshd_config(5), then the |
| backgrounded master connection will automatically terminate after |
| it has remained idle (with no client connections) for the |
| specified time. |
| |
| DynamicForward |
| Specifies that a TCP port on the local machine be forwarded over |
| the secure channel, and the application protocol is then used to |
| determine where to connect to from the remote machine. |
| |
| The argument must be [bind_address:]port. IPv6 addresses can be |
| specified by enclosing addresses in square brackets. By default, |
| the local port is bound in accordance with the GatewayPorts |
| setting. However, an explicit bind_address may be used to bind |
| the connection to a specific address. The bind_address of |
| ``localhost'' indicates that the listening port be bound for |
| local use only, while an empty address or `*' indicates that the |
| port should be available from all interfaces. |
| |
| Currently the SOCKS4 and SOCKS5 protocols are supported, and |
| ssh(1) will act as a SOCKS server. Multiple forwardings may be |
| specified, and additional forwardings can be given on the command |
| line. Only the superuser can forward privileged ports. |
| |
| EnableSSHKeysign |
| Setting this option to ``yes'' in the global client configuration |
| file /etc/ssh/ssh_config enables the use of the helper program |
| ssh-keysign(8) during HostbasedAuthentication. The argument must |
| be ``yes'' or ``no''. The default is ``no''. This option should |
| be placed in the non-hostspecific section. See ssh-keysign(8) |
| for more information. |
| |
| EscapeChar |
| Sets the escape character (default: `~'). The escape character |
| can also be set on the command line. The argument should be a |
| single character, `^' followed by a letter, or ``none'' to |
| disable the escape character entirely (making the connection |
| transparent for binary data). |
| |
| ExitOnForwardFailure |
| Specifies whether ssh(1) should terminate the connection if it |
| cannot set up all requested dynamic, tunnel, local, and remote |
| port forwardings. The argument must be ``yes'' or ``no''. The |
| default is ``no''. |
| |
| ForwardAgent |
| Specifies whether the connection to the authentication agent (if |
| any) will be forwarded to the remote machine. The argument must |
| be ``yes'' or ``no''. The default is ``no''. |
| |
| Agent forwarding should be enabled with caution. Users with the |
| ability to bypass file permissions on the remote host (for the |
| agent's Unix-domain socket) can access the local agent through |
| the forwarded connection. An attacker cannot obtain key material |
| from the agent, however they can perform operations on the keys |
| that enable them to authenticate using the identities loaded into |
| the agent. |
| |
| ForwardX11 |
| Specifies whether X11 connections will be automatically |
| redirected over the secure channel and DISPLAY set. The argument |
| must be ``yes'' or ``no''. The default is ``no''. |
| |
| X11 forwarding should be enabled with caution. Users with the |
| ability to bypass file permissions on the remote host (for the |
| user's X11 authorization database) can access the local X11 |
| display through the forwarded connection. An attacker may then |
| be able to perform activities such as keystroke monitoring if the |
| ForwardX11Trusted option is also enabled. |
| |
| ForwardX11Timeout |
| Specify a timeout for untrusted X11 forwarding using the format |
| described in the TIME FORMATS section of sshd_config(5). X11 |
| connections received by ssh(1) after this time will be refused. |
| The default is to disable untrusted X11 forwarding after twenty |
| minutes has elapsed. |
| |
| ForwardX11Trusted |
| If this option is set to ``yes'', remote X11 clients will have |
| full access to the original X11 display. |
| |
| If this option is set to ``no'', remote X11 clients will be |
| considered untrusted and prevented from stealing or tampering |
| with data belonging to trusted X11 clients. Furthermore, the |
| xauth(1) token used for the session will be set to expire after |
| 20 minutes. Remote clients will be refused access after this |
| time. |
| |
| The default is ``no''. |
| |
| See the X11 SECURITY extension specification for full details on |
| the restrictions imposed on untrusted clients. |
| |
| GatewayPorts |
| Specifies whether remote hosts are allowed to connect to local |
| forwarded ports. By default, ssh(1) binds local port forwardings |
| to the loopback address. This prevents other remote hosts from |
| connecting to forwarded ports. GatewayPorts can be used to |
| specify that ssh should bind local port forwardings to the |
| wildcard address, thus allowing remote hosts to connect to |
| forwarded ports. The argument must be ``yes'' or ``no''. The |
| default is ``no''. |
| |
| GlobalKnownHostsFile |
| Specifies one or more files to use for the global host key |
| database, separated by whitespace. The default is |
| /etc/ssh/ssh_known_hosts, /etc/ssh/ssh_known_hosts2. |
| |
| GSSAPIAuthentication |
| Specifies whether user authentication based on GSSAPI is allowed. |
| The default is ``no''. Note that this option applies to protocol |
| version 2 only. |
| |
| GSSAPIDelegateCredentials |
| Forward (delegate) credentials to the server. The default is |
| ``no''. Note that this option applies to protocol version 2 |
| only. |
| |
| HashKnownHosts |
| Indicates that ssh(1) should hash host names and addresses when |
| they are added to ~/.ssh/known_hosts. These hashed names may be |
| used normally by ssh(1) and sshd(8), but they do not reveal |
| identifying information should the file's contents be disclosed. |
| The default is ``no''. Note that existing names and addresses in |
| known hosts files will not be converted automatically, but may be |
| manually hashed using ssh-keygen(1). |
| |
| HostbasedAuthentication |
| Specifies whether to try rhosts based authentication with public |
| key authentication. The argument must be ``yes'' or ``no''. The |
| default is ``no''. This option applies to protocol version 2 |
| only and is similar to RhostsRSAAuthentication. |
| |
| HostKeyAlgorithms |
| Specifies the protocol version 2 host key algorithms that the |
| client wants to use in order of preference. The default for this |
| option is: |
| |
| ecdsa-sha2-nistp256-cert-v01@openssh.com, |
| ecdsa-sha2-nistp384-cert-v01@openssh.com, |
| ecdsa-sha2-nistp521-cert-v01@openssh.com, |
| ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com, |
| ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com, |
| ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, |
| ssh-rsa,ssh-dss |
| |
| If hostkeys are known for the destination host then this default |
| is modified to prefer their algorithms. |
| |
| HostKeyAlias |
| Specifies an alias that should be used instead of the real host |
| name when looking up or saving the host key in the host key |
| database files. This option is useful for tunneling SSH |
| connections or for multiple servers running on a single host. |
| |
| HostName |
| Specifies the real host name to log into. This can be used to |
| specify nicknames or abbreviations for hosts. If the hostname |
| contains the character sequence `%h', then this will be replaced |
| with the host name specified on the command line (this is useful |
| for manipulating unqualified names). The default is the name |
| given on the command line. Numeric IP addresses are also |
| permitted (both on the command line and in HostName |
| specifications). |
| |
| IdentitiesOnly |
| Specifies that ssh(1) should only use the authentication identity |
| files configured in the ssh_config files, even if ssh-agent(1) |
| offers more identities. The argument to this keyword must be |
| ``yes'' or ``no''. This option is intended for situations where |
| ssh-agent offers many different identities. The default is |
| ``no''. |
| |
| IdentityFile |
| Specifies a file from which the user's DSA, ECDSA or DSA |
| authentication identity is read. The default is ~/.ssh/identity |
| for protocol version 1, and ~/.ssh/id_dsa, ~/.ssh/id_ecdsa and |
| ~/.ssh/id_rsa for protocol version 2. Additionally, any |
| identities represented by the authentication agent will be used |
| for authentication. ssh(1) will try to load certificate |
| information from the filename obtained by appending -cert.pub to |
| the path of a specified IdentityFile. |
| |
| The file name may use the tilde syntax to refer to a user's home |
| directory or one of the following escape characters: `%d' (local |
| user's home directory), `%u' (local user name), `%l' (local host |
| name), `%h' (remote host name) or `%r' (remote user name). |
| |
| It is possible to have multiple identity files specified in |
| configuration files; all these identities will be tried in |
| sequence. Multiple IdentityFile directives will add to the list |
| of identities tried (this behaviour differs from that of other |
| configuration directives). |
| |
| IPQoS Specifies the IPv4 type-of-service or DSCP class for connections. |
| Accepted values are ``af11'', ``af12'', ``af13'', ``af21'', |
| ``af22'', ``af23'', ``af31'', ``af32'', ``af33'', ``af41'', |
| ``af42'', ``af43'', ``cs0'', ``cs1'', ``cs2'', ``cs3'', ``cs4'', |
| ``cs5'', ``cs6'', ``cs7'', ``ef'', ``lowdelay'', ``throughput'', |
| ``reliability'', or a numeric value. This option may take one or |
| two arguments, separated by whitespace. If one argument is |
| specified, it is used as the packet class unconditionally. If |
| two values are specified, the first is automatically selected for |
| interactive sessions and the second for non-interactive sessions. |
| The default is ``lowdelay'' for interactive sessions and |
| ``throughput'' for non-interactive sessions. |
| |
| KbdInteractiveAuthentication |
| Specifies whether to use keyboard-interactive authentication. |
| The argument to this keyword must be ``yes'' or ``no''. The |
| default is ``yes''. |
| |
| KbdInteractiveDevices |
| Specifies the list of methods to use in keyboard-interactive |
| authentication. Multiple method names must be comma-separated. |
| The default is to use the server specified list. The methods |
| available vary depending on what the server supports. For an |
| OpenSSH server, it may be zero or more of: ``bsdauth'', ``pam'', |
| and ``skey''. |
| |
| KexAlgorithms |
| Specifies the available KEX (Key Exchange) algorithms. Multiple |
| algorithms must be comma-separated. The default is: |
| |
| ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521, |
| diffie-hellman-group-exchange-sha256, |
| diffie-hellman-group-exchange-sha1, |
| diffie-hellman-group14-sha1, |
| diffie-hellman-group1-sha1 |
| |
| LocalCommand |
| Specifies a command to execute on the local machine after |
| successfully connecting to the server. The command string |
| extends to the end of the line, and is executed with the user's |
| shell. The following escape character substitutions will be |
| performed: `%d' (local user's home directory), `%h' (remote host |
| name), `%l' (local host name), `%n' (host name as provided on the |
| command line), `%p' (remote port), `%r' (remote user name) or |
| `%u' (local user name). |
| |
| The command is run synchronously and does not have access to the |
| session of the ssh(1) that spawned it. It should not be used for |
| interactive commands. |
| |
| This directive is ignored unless PermitLocalCommand has been |
| enabled. |
| |
| LocalForward |
| Specifies that a TCP port on the local machine be forwarded over |
| the secure channel to the specified host and port from the remote |
| machine. The first argument must be [bind_address:]port and the |
| second argument must be host:hostport. IPv6 addresses can be |
| specified by enclosing addresses in square brackets. Multiple |
| forwardings may be specified, and additional forwardings can be |
| given on the command line. Only the superuser can forward |
| privileged ports. By default, the local port is bound in |
| accordance with the GatewayPorts setting. However, an explicit |
| bind_address may be used to bind the connection to a specific |
| address. The bind_address of ``localhost'' indicates that the |
| listening port be bound for local use only, while an empty |
| address or `*' indicates that the port should be available from |
| all interfaces. |
| |
| LogLevel |
| Gives the verbosity level that is used when logging messages from |
| ssh(1). The possible values are: QUIET, FATAL, ERROR, INFO, |
| VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO. |
| DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify |
| higher levels of verbose output. |
| |
| MACs Specifies the MAC (message authentication code) algorithms in |
| order of preference. The MAC algorithm is used in protocol |
| version 2 for data integrity protection. Multiple algorithms |
| must be comma-separated. The default is: |
| |
| hmac-md5,hmac-sha1,umac-64@openssh.com, |
| hmac-ripemd160,hmac-sha1-96,hmac-md5-96, |
| hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512, |
| hmac-sha2-512-96 |
| |
| NoHostAuthenticationForLocalhost |
| This option can be used if the home directory is shared across |
| machines. In this case localhost will refer to a different |
| machine on each of the machines and the user will get many |
| warnings about changed host keys. However, this option disables |
| host authentication for localhost. The argument to this keyword |
| must be ``yes'' or ``no''. The default is to check the host key |
| for localhost. |
| |
| NumberOfPasswordPrompts |
| Specifies the number of password prompts before giving up. The |
| argument to this keyword must be an integer. The default is 3. |
| |
| PasswordAuthentication |
| Specifies whether to use password authentication. The argument |
| to this keyword must be ``yes'' or ``no''. The default is |
| ``yes''. |
| |
| PermitLocalCommand |
| Allow local command execution via the LocalCommand option or |
| using the !command escape sequence in ssh(1). The argument must |
| be ``yes'' or ``no''. The default is ``no''. |
| |
| PKCS11Provider |
| Specifies which PKCS#11 provider to use. The argument to this |
| keyword is the PKCS#11 shared library ssh(1) should use to |
| communicate with a PKCS#11 token providing the user's private RSA |
| key. |
| |
| Port Specifies the port number to connect on the remote host. The |
| default is 22. |
| |
| PreferredAuthentications |
| Specifies the order in which the client should try protocol 2 |
| authentication methods. This allows a client to prefer one |
| method (e.g. keyboard-interactive) over another method (e.g. |
| password). The default is: |
| |
| gssapi-with-mic,hostbased,publickey, |
| keyboard-interactive,password |
| |
| Protocol |
| Specifies the protocol versions ssh(1) should support in order of |
| preference. The possible values are `1' and `2'. Multiple |
| versions must be comma-separated. When this option is set to |
| ``2,1'' ssh will try version 2 and fall back to version 1 if |
| version 2 is not available. The default is `2'. |
| |
| ProxyCommand |
| Specifies the command to use to connect to the server. The |
| command string extends to the end of the line, and is executed |
| with the user's shell. In the command string, any occurrence of |
| `%h' will be substituted by the host name to connect, `%p' by the |
| port, and `%r' by the remote user name. The command can be |
| basically anything, and should read from its standard input and |
| write to its standard output. It should eventually connect an |
| sshd(8) server running on some machine, or execute sshd -i |
| somewhere. Host key management will be done using the HostName |
| of the host being connected (defaulting to the name typed by the |
| user). Setting the command to ``none'' disables this option |
| entirely. Note that CheckHostIP is not available for connects |
| with a proxy command. |
| |
| This directive is useful in conjunction with nc(1) and its proxy |
| support. For example, the following directive would connect via |
| an HTTP proxy at 192.0.2.0: |
| |
| ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p |
| |
| PubkeyAuthentication |
| Specifies whether to try public key authentication. The argument |
| to this keyword must be ``yes'' or ``no''. The default is |
| ``yes''. This option applies to protocol version 2 only. |
| |
| RekeyLimit |
| Specifies the maximum amount of data that may be transmitted |
| before the session key is renegotiated. The argument is the |
| number of bytes, with an optional suffix of `K', `M', or `G' to |
| indicate Kilobytes, Megabytes, or Gigabytes, respectively. The |
| default is between `1G' and `4G', depending on the cipher. This |
| option applies to protocol version 2 only. |
| |
| RemoteForward |
| Specifies that a TCP port on the remote machine be forwarded over |
| the secure channel to the specified host and port from the local |
| machine. The first argument must be [bind_address:]port and the |
| second argument must be host:hostport. IPv6 addresses can be |
| specified by enclosing addresses in square brackets. Multiple |
| forwardings may be specified, and additional forwardings can be |
| given on the command line. Privileged ports can be forwarded |
| only when logging in as root on the remote machine. |
| |
| If the port argument is `0', the listen port will be dynamically |
| allocated on the server and reported to the client at run time. |
| |
| If the bind_address is not specified, the default is to only bind |
| to loopback addresses. If the bind_address is `*' or an empty |
| string, then the forwarding is requested to listen on all |
| interfaces. Specifying a remote bind_address will only succeed |
| if the server's GatewayPorts option is enabled (see |
| sshd_config(5)). |
| |
| RequestTTY |
| Specifies whether to request a pseudo-tty for the session. The |
| argument may be one of: ``no'' (never request a TTY), ``yes'' |
| (always request a TTY when standard input is a TTY), ``force'' |
| (always request a TTY) or ``auto'' (request a TTY when opening a |
| login session). This option mirrors the -t and -T flags for |
| ssh(1). |
| |
| RhostsRSAAuthentication |
| Specifies whether to try rhosts based authentication with RSA |
| host authentication. The argument must be ``yes'' or ``no''. |
| The default is ``no''. This option applies to protocol version 1 |
| only and requires ssh(1) to be setuid root. |
| |
| RSAAuthentication |
| Specifies whether to try RSA authentication. The argument to |
| this keyword must be ``yes'' or ``no''. RSA authentication will |
| only be attempted if the identity file exists, or an |
| authentication agent is running. The default is ``yes''. Note |
| that this option applies to protocol version 1 only. |
| |
| SendEnv |
| Specifies what variables from the local environ(7) should be sent |
| to the server. Note that environment passing is only supported |
| for protocol 2. The server must also support it, and the server |
| must be configured to accept these environment variables. Refer |
| to AcceptEnv in sshd_config(5) for how to configure the server. |
| Variables are specified by name, which may contain wildcard |
| characters. Multiple environment variables may be separated by |
| whitespace or spread across multiple SendEnv directives. The |
| default is not to send any environment variables. |
| |
| See PATTERNS for more information on patterns. |
| |
| ServerAliveCountMax |
| Sets the number of server alive messages (see below) which may be |
| sent without ssh(1) receiving any messages back from the server. |
| If this threshold is reached while server alive messages are |
| being sent, ssh will disconnect from the server, terminating the |
| session. It is important to note that the use of server alive |
| messages is very different from TCPKeepAlive (below). The server |
| alive messages are sent through the encrypted channel and |
| therefore will not be spoofable. The TCP keepalive option |
| enabled by TCPKeepAlive is spoofable. The server alive mechanism |
| is valuable when the client or server depend on knowing when a |
| connection has become inactive. |
| |
| The default value is 3. If, for example, ServerAliveInterval |
| (see below) is set to 15 and ServerAliveCountMax is left at the |
| default, if the server becomes unresponsive, ssh will disconnect |
| after approximately 45 seconds. This option applies to protocol |
| version 2 only. |
| |
| ServerAliveInterval |
| Sets a timeout interval in seconds after which if no data has |
| been received from the server, ssh(1) will send a message through |
| the encrypted channel to request a response from the server. The |
| default is 0, indicating that these messages will not be sent to |
| the server. This option applies to protocol version 2 only. |
| |
| StrictHostKeyChecking |
| If this flag is set to ``yes'', ssh(1) will never automatically |
| add host keys to the ~/.ssh/known_hosts file, and refuses to |
| connect to hosts whose host key has changed. This provides |
| maximum protection against trojan horse attacks, though it can be |
| annoying when the /etc/ssh/ssh_known_hosts file is poorly |
| maintained or when connections to new hosts are frequently made. |
| This option forces the user to manually add all new hosts. If |
| this flag is set to ``no'', ssh will automatically add new host |
| keys to the user known hosts files. If this flag is set to |
| ``ask'', new host keys will be added to the user known host files |
| only after the user has confirmed that is what they really want |
| to do, and ssh will refuse to connect to hosts whose host key has |
| changed. The host keys of known hosts will be verified |
| automatically in all cases. The argument must be ``yes'', |
| ``no'', or ``ask''. The default is ``ask''. |
| |
| TCPKeepAlive |
| Specifies whether the system should send TCP keepalive messages |
| to the other side. If they are sent, death of the connection or |
| crash of one of the machines will be properly noticed. However, |
| this means that connections will die if the route is down |
| temporarily, and some people find it annoying. |
| |
| The default is ``yes'' (to send TCP keepalive messages), and the |
| client will notice if the network goes down or the remote host |
| dies. This is important in scripts, and many users want it too. |
| |
| To disable TCP keepalive messages, the value should be set to |
| ``no''. |
| |
| Tunnel Request tun(4) device forwarding between the client and the |
| server. The argument must be ``yes'', ``point-to-point'' (layer |
| 3), ``ethernet'' (layer 2), or ``no''. Specifying ``yes'' |
| requests the default tunnel mode, which is ``point-to-point''. |
| The default is ``no''. |
| |
| TunnelDevice |
| Specifies the tun(4) devices to open on the client (local_tun) |
| and the server (remote_tun). |
| |
| The argument must be local_tun[:remote_tun]. The devices may be |
| specified by numerical ID or the keyword ``any'', which uses the |
| next available tunnel device. If remote_tun is not specified, it |
| defaults to ``any''. The default is ``any:any''. |
| |
| UsePrivilegedPort |
| Specifies whether to use a privileged port for outgoing |
| connections. The argument must be ``yes'' or ``no''. The |
| default is ``no''. If set to ``yes'', ssh(1) must be setuid |
| root. Note that this option must be set to ``yes'' for |
| RhostsRSAAuthentication with older servers. |
| |
| User Specifies the user to log in as. This can be useful when a |
| different user name is used on different machines. This saves |
| the trouble of having to remember to give the user name on the |
| command line. |
| |
| UserKnownHostsFile |
| Specifies one or more files to use for the user host key |
| database, separated by whitespace. The default is |
| ~/.ssh/known_hosts, ~/.ssh/known_hosts2. |
| |
| VerifyHostKeyDNS |
| Specifies whether to verify the remote key using DNS and SSHFP |
| resource records. If this option is set to ``yes'', the client |
| will implicitly trust keys that match a secure fingerprint from |
| DNS. Insecure fingerprints will be handled as if this option was |
| set to ``ask''. If this option is set to ``ask'', information on |
| fingerprint match will be displayed, but the user will still need |
| to confirm new host keys according to the StrictHostKeyChecking |
| option. The argument must be ``yes'', ``no'', or ``ask''. The |
| default is ``no''. Note that this option applies to protocol |
| version 2 only. |
| |
| See also VERIFYING HOST KEYS in ssh(1). |
| |
| VisualHostKey |
| If this flag is set to ``yes'', an ASCII art representation of |
| the remote host key fingerprint is printed in addition to the hex |
| fingerprint string at login and for unknown host keys. If this |
| flag is set to ``no'', no fingerprint strings are printed at |
| login and only the hex fingerprint string will be printed for |
| unknown host keys. The default is ``no''. |
| |
| XAuthLocation |
| Specifies the full pathname of the xauth(1) program. The default |
| is /usr/X11R6/bin/xauth. |
| |
| PATTERNS |
| A pattern consists of zero or more non-whitespace characters, `*' (a |
| wildcard that matches zero or more characters), or `?' (a wildcard that |
| matches exactly one character). For example, to specify a set of |
| declarations for any host in the ``.co.uk'' set of domains, the following |
| pattern could be used: |
| |
| Host *.co.uk |
| |
| The following pattern would match any host in the 192.168.0.[0-9] network |
| range: |
| |
| Host 192.168.0.? |
| |
| A pattern-list is a comma-separated list of patterns. Patterns within |
| pattern-lists may be negated by preceding them with an exclamation mark |
| (`!'). For example, to allow a key to be used from anywhere within an |
| organisation except from the ``dialup'' pool, the following entry (in |
| authorized_keys) could be used: |
| |
| from="!*.dialup.example.com,*.example.com" |
| |
| FILES |
| ~/.ssh/config |
| This is the per-user configuration file. The format of this file |
| is described above. This file is used by the SSH client. |
| Because of the potential for abuse, this file must have strict |
| permissions: read/write for the user, and not accessible by |
| others. |
| |
| /etc/ssh/ssh_config |
| Systemwide configuration file. This file provides defaults for |
| those values that are not specified in the user's configuration |
| file, and for those users who do not have a configuration file. |
| This file must be world-readable. |
| |
| SEE ALSO |
| ssh(1) |
| |
| AUTHORS |
| OpenSSH is a derivative of the original and free ssh 1.2.12 release by |
| Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo |
| de Raadt and Dug Song removed many bugs, re-added newer features and |
| created OpenSSH. Markus Friedl contributed the support for SSH protocol |
| versions 1.5 and 2.0. |
| |
| OpenBSD 5.0 September 9, 2011 OpenBSD 5.0 |
