Google Git
Sign in
nest-open-source / nest-learning-thermostat / 5.1.7 / freetype / 848ffce147ba5810493d12bf87d48d444b6df7ae / . / freetype-2.6 / src / truetype / ttgload.c
blob: e1acd6912c9b9966397b95dd965b95e9c791bd79 [file] [log] [blame]
/***************************************************************************/
/* */
/* ttgload.c */
/* */
/* TrueType Glyph Loader (body). */
/* */
/* Copyright 1996-2015 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#include <ft2build.h>
#include FT_INTERNAL_DEBUG_H
#include FT_INTERNAL_CALC_H
#include FT_INTERNAL_STREAM_H
#include FT_INTERNAL_SFNT_H
#include FT_TRUETYPE_TAGS_H
#include FT_OUTLINE_H
#include FT_TRUETYPE_DRIVER_H
#include "ttgload.h"
#include "ttpload.h"
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
#include "ttgxvar.h"
#endif
#include "tterrors.h"
#include "ttsubpix.h"
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_ttgload
/*************************************************************************/
/* */
/* Composite glyph flags. */
/* */
#define ARGS_ARE_WORDS 0x0001
#define ARGS_ARE_XY_VALUES 0x0002
#define ROUND_XY_TO_GRID 0x0004
#define WE_HAVE_A_SCALE 0x0008
/* reserved 0x0010 */
#define MORE_COMPONENTS 0x0020
#define WE_HAVE_AN_XY_SCALE 0x0040
#define WE_HAVE_A_2X2 0x0080
#define WE_HAVE_INSTR 0x0100
#define USE_MY_METRICS 0x0200
#define OVERLAP_COMPOUND 0x0400
#define SCALED_COMPONENT_OFFSET 0x0800
#define UNSCALED_COMPONENT_OFFSET 0x1000
/*************************************************************************/
/* */
/* Return the horizontal metrics in font units for a given glyph. */
/* */
FT_LOCAL_DEF( void )
TT_Get_HMetrics( TT_Face face,
FT_UInt idx,
FT_Short* lsb,
FT_UShort* aw )
{
( (SFNT_Service)face->sfnt )->get_metrics( face, 0, idx, lsb, aw );
FT_TRACE5(( " advance width (font units): %d\n", *aw ));
FT_TRACE5(( " left side bearing (font units): %d\n", *lsb ));
}
/*************************************************************************/
/* */
/* Return the vertical metrics in font units for a given glyph. */
/* See macro `TT_LOADER_SET_PP' below for explanations. */
/* */
FT_LOCAL_DEF( void )
TT_Get_VMetrics( TT_Face face,
FT_UInt idx,
FT_Pos yMax,
FT_Short* tsb,
FT_UShort* ah )
{
if ( face->vertical_info )
( (SFNT_Service)face->sfnt )->get_metrics( face, 1, idx, tsb, ah );
else if ( face->os2.version != 0xFFFFU )
{
*tsb = (FT_Short)( face->os2.sTypoAscender - yMax );
*ah = (FT_UShort)FT_ABS( face->os2.sTypoAscender -
face->os2.sTypoDescender );
}
else
{
*tsb = (FT_Short)( face->horizontal.Ascender - yMax );
*ah = (FT_UShort)FT_ABS( face->horizontal.Ascender -
face->horizontal.Descender );
}
FT_TRACE5(( " advance height (font units): %d\n", *ah ));
FT_TRACE5(( " top side bearing (font units): %d\n", *tsb ));
}
static FT_Error
tt_get_metrics( TT_Loader loader,
FT_UInt glyph_index )
{
TT_Face face = (TT_Face)loader->face;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( face );
#endif
FT_Error error;
FT_Stream stream = loader->stream;
FT_Short left_bearing = 0, top_bearing = 0;
FT_UShort advance_width = 0, advance_height = 0;
/* we must preserve the stream position */
/* (which gets altered by the metrics functions) */
FT_ULong pos = FT_STREAM_POS();
TT_Get_HMetrics( face, glyph_index,
&left_bearing,
&advance_width );
TT_Get_VMetrics( face, glyph_index,
loader->bbox.yMax,
&top_bearing,
&advance_height );
if ( FT_STREAM_SEEK( pos ) )
return error;
loader->left_bearing = left_bearing;
loader->advance = advance_width;
loader->top_bearing = top_bearing;
loader->vadvance = advance_height;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 &&
loader->exec )
{
loader->exec->sph_tweak_flags = 0;
/* This may not be the right place for this, but it works... */
/* Note that we have to unconditionally load the tweaks since */
/* it is possible that glyphs individually switch ClearType's */
/* backwards compatibility mode on and off. */
sph_set_tweaks( loader, glyph_index );
}
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
if ( !loader->linear_def )
{
loader->linear_def = 1;
loader->linear = advance_width;
}
return FT_Err_Ok;
}
#ifdef FT_CONFIG_OPTION_INCREMENTAL
static void
tt_get_metrics_incr_overrides( TT_Loader loader,
FT_UInt glyph_index )
{
TT_Face face = (TT_Face)loader->face;
FT_Short left_bearing = 0, top_bearing = 0;
FT_UShort advance_width = 0, advance_height = 0;
/* If this is an incrementally loaded font check whether there are */
/* overriding metrics for this glyph. */
if ( face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
FT_Error error;
metrics.bearing_x = loader->left_bearing;
metrics.bearing_y = 0;
metrics.advance = loader->advance;
metrics.advance_v = 0;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, FALSE, &metrics );
if ( error )
goto Exit;
left_bearing = (FT_Short)metrics.bearing_x;
advance_width = (FT_UShort)metrics.advance;
#if 0
/* GWW: Do I do the same for vertical metrics? */
metrics.bearing_x = 0;
metrics.bearing_y = loader->top_bearing;
metrics.advance = loader->vadvance;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, TRUE, &metrics );
if ( error )
goto Exit;
top_bearing = (FT_Short)metrics.bearing_y;
advance_height = (FT_UShort)metrics.advance;
#endif /* 0 */
loader->left_bearing = left_bearing;
loader->advance = advance_width;
loader->top_bearing = top_bearing;
loader->vadvance = advance_height;
if ( !loader->linear_def )
{
loader->linear_def = 1;
loader->linear = advance_width;
}
}
Exit:
return;
}
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
/*************************************************************************/
/* */
/* Translates an array of coordinates. */
/* */
static void
translate_array( FT_UInt n,
FT_Vector* coords,
FT_Pos delta_x,
FT_Pos delta_y )
{
FT_UInt k;
if ( delta_x )
for ( k = 0; k < n; k++ )
coords[k].x += delta_x;
if ( delta_y )
for ( k = 0; k < n; k++ )
coords[k].y += delta_y;
}
/*************************************************************************/
/* */
/* The following functions are used by default with TrueType fonts. */
/* However, they can be replaced by alternatives if we need to support */
/* TrueType-compressed formats (like MicroType) in the future. */
/* */
/*************************************************************************/
FT_CALLBACK_DEF( FT_Error )
TT_Access_Glyph_Frame( TT_Loader loader,
FT_UInt glyph_index,
FT_ULong offset,
FT_UInt byte_count )
{
FT_Error error;
FT_Stream stream = loader->stream;
/* for non-debug mode */
FT_UNUSED( glyph_index );
FT_TRACE4(( "Glyph %ld\n", glyph_index ));
/* the following line sets the `error' variable through macros! */
if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( byte_count ) )
return error;
loader->cursor = stream->cursor;
loader->limit = stream->limit;
return FT_Err_Ok;
}
FT_CALLBACK_DEF( void )
TT_Forget_Glyph_Frame( TT_Loader loader )
{
FT_Stream stream = loader->stream;
FT_FRAME_EXIT();
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Glyph_Header( TT_Loader loader )
{
FT_Byte* p = loader->cursor;
FT_Byte* limit = loader->limit;
if ( p + 10 > limit )
return FT_THROW( Invalid_Outline );
loader->n_contours = FT_NEXT_SHORT( p );
loader->bbox.xMin = FT_NEXT_SHORT( p );
loader->bbox.yMin = FT_NEXT_SHORT( p );
loader->bbox.xMax = FT_NEXT_SHORT( p );
loader->bbox.yMax = FT_NEXT_SHORT( p );
FT_TRACE5(( " # of contours: %d\n", loader->n_contours ));
FT_TRACE5(( " xMin: %4d xMax: %4d\n", loader->bbox.xMin,
loader->bbox.xMax ));
FT_TRACE5(( " yMin: %4d yMax: %4d\n", loader->bbox.yMin,
loader->bbox.yMax ));
loader->cursor = p;
return FT_Err_Ok;
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Simple_Glyph( TT_Loader load )
{
FT_Error error;
FT_Byte* p = load->cursor;
FT_Byte* limit = load->limit;
FT_GlyphLoader gloader = load->gloader;
FT_Int n_contours = load->n_contours;
FT_Outline* outline;
FT_UShort n_ins;
FT_Int n_points;
FT_ULong tmp;
FT_Byte *flag, *flag_limit;
FT_Byte c, count;
FT_Vector *vec, *vec_limit;
FT_Pos x;
FT_Short *cont, *cont_limit, prev_cont;
FT_Int xy_size = 0;
/* check that we can add the contours to the glyph */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader, 0, n_contours );
if ( error )
goto Fail;
/* reading the contours' endpoints & number of points */
cont = gloader->current.outline.contours;
cont_limit = cont + n_contours;
/* check space for contours array + instructions count */
if ( n_contours >= 0xFFF || p + ( n_contours + 1 ) * 2 > limit )
goto Invalid_Outline;
prev_cont = FT_NEXT_SHORT( p );
if ( n_contours > 0 )
cont[0] = prev_cont;
if ( prev_cont < 0 )
goto Invalid_Outline;
for ( cont++; cont < cont_limit; cont++ )
{
cont[0] = FT_NEXT_SHORT( p );
if ( cont[0] <= prev_cont )
{
/* unordered contours: this is invalid */
goto Invalid_Outline;
}
prev_cont = cont[0];
}
n_points = 0;
if ( n_contours > 0 )
{
n_points = cont[-1] + 1;
if ( n_points < 0 )
goto Invalid_Outline;
}
/* note that we will add four phantom points later */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader, n_points + 4, 0 );
if ( error )
goto Fail;
/* reading the bytecode instructions */
load->glyph->control_len = 0;
load->glyph->control_data = NULL;
if ( p + 2 > limit )
goto Invalid_Outline;
n_ins = FT_NEXT_USHORT( p );
FT_TRACE5(( " Instructions size: %u\n", n_ins ));
/* check it */
if ( ( limit - p ) < n_ins )
{
FT_TRACE0(( "TT_Load_Simple_Glyph: instruction count mismatch\n" ));
error = FT_THROW( Too_Many_Hints );
goto Fail;
}
#ifdef TT_USE_BYTECODE_INTERPRETER
if ( IS_HINTED( load->load_flags ) )
{
/* we don't trust `maxSizeOfInstructions' in the `maxp' table */
/* and thus update the bytecode array size by ourselves */
tmp = load->exec->glyphSize;
error = Update_Max( load->exec->memory,
&tmp,
sizeof ( FT_Byte ),
(void*)&load->exec->glyphIns,
n_ins );
load->exec->glyphSize = (FT_UShort)tmp;
if ( error )
return error;
load->glyph->control_len = n_ins;
load->glyph->control_data = load->exec->glyphIns;
FT_MEM_COPY( load->exec->glyphIns, p, (FT_Long)n_ins );
}
#endif /* TT_USE_BYTECODE_INTERPRETER */
p += n_ins;
outline = &gloader->current.outline;
/* reading the point tags */
flag = (FT_Byte*)outline->tags;
flag_limit = flag + n_points;
FT_ASSERT( flag != NULL );
while ( flag < flag_limit )
{
if ( p + 1 > limit )
goto Invalid_Outline;
*flag++ = c = FT_NEXT_BYTE( p );
if ( c & 8 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
count = FT_NEXT_BYTE( p );
if ( flag + (FT_Int)count > flag_limit )
goto Invalid_Outline;
for ( ; count > 0; count-- )
*flag++ = c;
}
}
/* reading the X coordinates */
vec = outline->points;
vec_limit = vec + n_points;
flag = (FT_Byte*)outline->tags;
x = 0;
if ( p + xy_size > limit )
goto Invalid_Outline;
for ( ; vec < vec_limit; vec++, flag++ )
{
FT_Pos y = 0;
FT_Byte f = *flag;
if ( f & 2 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_BYTE( p );
if ( ( f & 16 ) == 0 )
y = -y;
}
else if ( ( f & 16 ) == 0 )
{
if ( p + 2 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_SHORT( p );
}
x += y;
vec->x = x;
/* the cast is for stupid compilers */
*flag = (FT_Byte)( f & ~( 2 | 16 ) );
}
/* reading the Y coordinates */
vec = gloader->current.outline.points;
vec_limit = vec + n_points;
flag = (FT_Byte*)outline->tags;
x = 0;
for ( ; vec < vec_limit; vec++, flag++ )
{
FT_Pos y = 0;
FT_Byte f = *flag;
if ( f & 4 )
{
if ( p + 1 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_BYTE( p );
if ( ( f & 32 ) == 0 )
y = -y;
}
else if ( ( f & 32 ) == 0 )
{
if ( p + 2 > limit )
goto Invalid_Outline;
y = (FT_Pos)FT_NEXT_SHORT( p );
}
x += y;
vec->y = x;
/* the cast is for stupid compilers */
*flag = (FT_Byte)( f & FT_CURVE_TAG_ON );
}
outline->n_points = (FT_Short)n_points;
outline->n_contours = (FT_Short)n_contours;
load->cursor = p;
Fail:
return error;
Invalid_Outline:
error = FT_THROW( Invalid_Outline );
goto Fail;
}
FT_CALLBACK_DEF( FT_Error )
TT_Load_Composite_Glyph( TT_Loader loader )
{
FT_Error error;
FT_Byte* p = loader->cursor;
FT_Byte* limit = loader->limit;
FT_GlyphLoader gloader = loader->gloader;
FT_SubGlyph subglyph;
FT_UInt num_subglyphs;
num_subglyphs = 0;
do
{
FT_Fixed xx, xy, yy, yx;
FT_UInt count;
/* check that we can load a new subglyph */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs + 1 );
if ( error )
goto Fail;
/* check space */
if ( p + 4 > limit )
goto Invalid_Composite;
subglyph = gloader->current.subglyphs + num_subglyphs;
subglyph->arg1 = subglyph->arg2 = 0;
subglyph->flags = FT_NEXT_USHORT( p );
subglyph->index = FT_NEXT_USHORT( p );
/* check space */
count = 2;
if ( subglyph->flags & ARGS_ARE_WORDS )
count += 2;
if ( subglyph->flags & WE_HAVE_A_SCALE )
count += 2;
else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
count += 4;
else if ( subglyph->flags & WE_HAVE_A_2X2 )
count += 8;
if ( p + count > limit )
goto Invalid_Composite;
/* read arguments */
if ( subglyph->flags & ARGS_ARE_XY_VALUES )
{
if ( subglyph->flags & ARGS_ARE_WORDS )
{
subglyph->arg1 = FT_NEXT_SHORT( p );
subglyph->arg2 = FT_NEXT_SHORT( p );
}
else
{
subglyph->arg1 = FT_NEXT_CHAR( p );
subglyph->arg2 = FT_NEXT_CHAR( p );
}
}
else
{
if ( subglyph->flags & ARGS_ARE_WORDS )
{
subglyph->arg1 = (FT_Int)FT_NEXT_USHORT( p );
subglyph->arg2 = (FT_Int)FT_NEXT_USHORT( p );
}
else
{
subglyph->arg1 = (FT_Int)FT_NEXT_BYTE( p );
subglyph->arg2 = (FT_Int)FT_NEXT_BYTE( p );
}
}
/* read transform */
xx = yy = 0x10000L;
xy = yx = 0;
if ( subglyph->flags & WE_HAVE_A_SCALE )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = xx;
}
else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
}
else if ( subglyph->flags & WE_HAVE_A_2X2 )
{
xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
xy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
}
subglyph->transform.xx = xx;
subglyph->transform.xy = xy;
subglyph->transform.yx = yx;
subglyph->transform.yy = yy;
num_subglyphs++;
} while ( subglyph->flags & MORE_COMPONENTS );
gloader->current.num_subglyphs = num_subglyphs;
#ifdef TT_USE_BYTECODE_INTERPRETER
{
FT_Stream stream = loader->stream;
/* we must undo the FT_FRAME_ENTER in order to point */
/* to the composite instructions, if we find some. */
/* We will process them later. */
/* */
loader->ins_pos = (FT_ULong)( FT_STREAM_POS() +
p - limit );
}
#endif
loader->cursor = p;
Fail:
return error;
Invalid_Composite:
error = FT_THROW( Invalid_Composite );
goto Fail;
}
FT_LOCAL_DEF( void )
TT_Init_Glyph_Loading( TT_Face face )
{
face->access_glyph_frame = TT_Access_Glyph_Frame;
face->read_glyph_header = TT_Load_Glyph_Header;
face->read_simple_glyph = TT_Load_Simple_Glyph;
face->read_composite_glyph = TT_Load_Composite_Glyph;
face->forget_glyph_frame = TT_Forget_Glyph_Frame;
}
static void
tt_prepare_zone( TT_GlyphZone zone,
FT_GlyphLoad load,
FT_UInt start_point,
FT_UInt start_contour )
{
zone->n_points = (FT_UShort)load->outline.n_points -
(FT_UShort)start_point;
zone->n_contours = load->outline.n_contours -
(FT_Short)start_contour;
zone->org = load->extra_points + start_point;
zone->cur = load->outline.points + start_point;
zone->orus = load->extra_points2 + start_point;
zone->tags = (FT_Byte*)load->outline.tags + start_point;
zone->contours = (FT_UShort*)load->outline.contours + start_contour;
zone->first_point = (FT_UShort)start_point;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Hint_Glyph */
/* */
/* <Description> */
/* Hint the glyph using the zone prepared by the caller. Note that */
/* the zone is supposed to include four phantom points. */
/* */
static FT_Error
TT_Hint_Glyph( TT_Loader loader,
FT_Bool is_composite )
{
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
TT_Face face = (TT_Face)loader->face;
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( face );
#endif
TT_GlyphZone zone = &loader->zone;
#ifdef TT_USE_BYTECODE_INTERPRETER
FT_Long n_ins;
#else
FT_UNUSED( is_composite );
#endif
#ifdef TT_USE_BYTECODE_INTERPRETER
if ( loader->glyph->control_len > 0xFFFFL )
{
FT_TRACE1(( "TT_Hint_Glyph: too long instructions" ));
FT_TRACE1(( " (0x%lx byte) is truncated\n",
loader->glyph->control_len ));
}
n_ins = loader->glyph->control_len;
/* save original point position in org */
if ( n_ins > 0 )
FT_ARRAY_COPY( zone->org, zone->cur, zone->n_points );
/* Reset graphics state. */
loader->exec->GS = ((TT_Size)loader->size)->GS;
/* XXX: UNDOCUMENTED! Hinting instructions of a composite glyph */
/* completely refer to the (already) hinted subglyphs. */
if ( is_composite )
{
loader->exec->metrics.x_scale = 1 << 16;
loader->exec->metrics.y_scale = 1 << 16;
FT_ARRAY_COPY( zone->orus, zone->cur, zone->n_points );
}
else
{
loader->exec->metrics.x_scale =
((TT_Size)loader->size)->metrics.x_scale;
loader->exec->metrics.y_scale =
((TT_Size)loader->size)->metrics.y_scale;
}
#endif
/* round phantom points */
zone->cur[zone->n_points - 4].x =
FT_PIX_ROUND( zone->cur[zone->n_points - 4].x );
zone->cur[zone->n_points - 3].x =
FT_PIX_ROUND( zone->cur[zone->n_points - 3].x );
zone->cur[zone->n_points - 2].y =
FT_PIX_ROUND( zone->cur[zone->n_points - 2].y );
zone->cur[zone->n_points - 1].y =
FT_PIX_ROUND( zone->cur[zone->n_points - 1].y );
#ifdef TT_USE_BYTECODE_INTERPRETER
if ( n_ins > 0 )
{
FT_Error error;
FT_GlyphLoader gloader = loader->gloader;
FT_Outline current_outline = gloader->current.outline;
TT_Set_CodeRange( loader->exec, tt_coderange_glyph,
loader->exec->glyphIns, n_ins );
loader->exec->is_composite = is_composite;
loader->exec->pts = *zone;
error = TT_Run_Context( loader->exec );
if ( error && loader->exec->pedantic_hinting )
return error;
/* store drop-out mode in bits 5-7; set bit 2 also as a marker */
current_outline.tags[0] |=
( loader->exec->GS.scan_type << 5 ) | FT_CURVE_TAG_HAS_SCANMODE;
}
#endif
/* save glyph phantom points */
loader->pp1 = zone->cur[zone->n_points - 4];
loader->pp2 = zone->cur[zone->n_points - 3];
loader->pp3 = zone->cur[zone->n_points - 2];
loader->pp4 = zone->cur[zone->n_points - 1];
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 )
{
if ( loader->exec->sph_tweak_flags & SPH_TWEAK_DEEMBOLDEN )
FT_Outline_EmboldenXY( &loader->gloader->current.outline, -24, 0 );
else if ( loader->exec->sph_tweak_flags & SPH_TWEAK_EMBOLDEN )
FT_Outline_EmboldenXY( &loader->gloader->current.outline, 24, 0 );
}
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
return FT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Simple_Glyph */
/* */
/* <Description> */
/* Once a simple glyph has been loaded, it needs to be processed. */
/* Usually, this means scaling and hinting through bytecode */
/* interpretation. */
/* */
static FT_Error
TT_Process_Simple_Glyph( TT_Loader loader )
{
FT_GlyphLoader gloader = loader->gloader;
FT_Error error = FT_Err_Ok;
FT_Outline* outline;
FT_Int n_points;
outline = &gloader->current.outline;
n_points = outline->n_points;
/* set phantom points */
outline->points[n_points ] = loader->pp1;
outline->points[n_points + 1] = loader->pp2;
outline->points[n_points + 2] = loader->pp3;
outline->points[n_points + 3] = loader->pp4;
outline->tags[n_points ] = 0;
outline->tags[n_points + 1] = 0;
outline->tags[n_points + 2] = 0;
outline->tags[n_points + 3] = 0;
n_points += 4;
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
if ( ((TT_Face)loader->face)->doblend )
{
/* Deltas apply to the unscaled data. */
error = TT_Vary_Apply_Glyph_Deltas( (TT_Face)(loader->face),
loader->glyph_index,
outline,
(FT_UInt)n_points );
if ( error )
return error;
}
#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
if ( IS_HINTED( loader->load_flags ) )
{
tt_prepare_zone( &loader->zone, &gloader->current, 0, 0 );
FT_ARRAY_COPY( loader->zone.orus, loader->zone.cur,
loader->zone.n_points + 4 );
}
{
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
TT_Face face = (TT_Face)loader->face;
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( face );
FT_String* family = face->root.family_name;
FT_UInt ppem = loader->size->metrics.x_ppem;
FT_String* style = face->root.style_name;
FT_UInt x_scale_factor = 1000;
#endif
FT_Vector* vec = outline->points;
FT_Vector* limit = outline->points + n_points;
FT_Fixed x_scale = 0; /* pacify compiler */
FT_Fixed y_scale = 0;
FT_Bool do_scale = FALSE;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 )
{
/* scale, but only if enabled and only if TT hinting is being used */
if ( IS_HINTED( loader->load_flags ) )
x_scale_factor = sph_test_tweak_x_scaling( face,
family,
ppem,
style,
loader->glyph_index );
/* scale the glyph */
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ||
x_scale_factor != 1000 )
{
x_scale = FT_MulDiv( ((TT_Size)loader->size)->metrics.x_scale,
(FT_Long)x_scale_factor, 1000 );
y_scale = ((TT_Size)loader->size)->metrics.y_scale;
/* compensate for any scaling by de/emboldening; */
/* the amount was determined via experimentation */
if ( x_scale_factor != 1000 && ppem > 11 )
FT_Outline_EmboldenXY( outline,
FT_MulFix( 1280 * ppem,
1000 - x_scale_factor ),
0 );
do_scale = TRUE;
}
}
else
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
{
/* scale the glyph */
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
x_scale = ((TT_Size)loader->size)->metrics.x_scale;
y_scale = ((TT_Size)loader->size)->metrics.y_scale;
do_scale = TRUE;
}
}
if ( do_scale )
{
for ( ; vec < limit; vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
loader->pp1 = outline->points[n_points - 4];
loader->pp2 = outline->points[n_points - 3];
loader->pp3 = outline->points[n_points - 2];
loader->pp4 = outline->points[n_points - 1];
}
}
if ( IS_HINTED( loader->load_flags ) )
{
loader->zone.n_points += 4;
error = TT_Hint_Glyph( loader, 0 );
}
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Composite_Component */
/* */
/* <Description> */
/* Once a composite component has been loaded, it needs to be */
/* processed. Usually, this means transforming and translating. */
/* */
static FT_Error
TT_Process_Composite_Component( TT_Loader loader,
FT_SubGlyph subglyph,
FT_UInt start_point,
FT_UInt num_base_points )
{
FT_GlyphLoader gloader = loader->gloader;
FT_Vector* base_vec = gloader->base.outline.points;
FT_UInt num_points = (FT_UInt)gloader->base.outline.n_points;
FT_Bool have_scale;
FT_Pos x, y;
have_scale = FT_BOOL( subglyph->flags & ( WE_HAVE_A_SCALE |
WE_HAVE_AN_XY_SCALE |
WE_HAVE_A_2X2 ) );
/* perform the transform required for this subglyph */
if ( have_scale )
{
FT_UInt i;
for ( i = num_base_points; i < num_points; i++ )
FT_Vector_Transform( base_vec + i, &subglyph->transform );
}
/* get offset */
if ( !( subglyph->flags & ARGS_ARE_XY_VALUES ) )
{
FT_UInt k = (FT_UInt)subglyph->arg1;
FT_UInt l = (FT_UInt)subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
/* match l-th point of the newly loaded component to the k-th point */
/* of the previously loaded components. */
/* change to the point numbers used by our outline */
k += start_point;
l += num_base_points;
if ( k >= num_base_points ||
l >= num_points )
return FT_THROW( Invalid_Composite );
p1 = gloader->base.outline.points + k;
p2 = gloader->base.outline.points + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = subglyph->arg1;
y = subglyph->arg2;
if ( !x && !y )
return FT_Err_Ok;
/* Use a default value dependent on */
/* TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED. This is useful for old */
/* TT fonts which don't set the xxx_COMPONENT_OFFSET bit. */
if ( have_scale &&
#ifdef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
!( subglyph->flags & UNSCALED_COMPONENT_OFFSET ) )
#else
( subglyph->flags & SCALED_COMPONENT_OFFSET ) )
#endif
{
#if 0
/*******************************************************************/
/* */
/* This algorithm is what Apple documents. But it doesn't work. */
/* */
int a = subglyph->transform.xx > 0 ? subglyph->transform.xx
: -subglyph->transform.xx;
int b = subglyph->transform.yx > 0 ? subglyph->transform.yx
: -subglyph->transform.yx;
int c = subglyph->transform.xy > 0 ? subglyph->transform.xy
: -subglyph->transform.xy;
int d = subglyph->transform.yy > 0 ? subglyph->transform.yy
: -subglyph->transform.yy;
int m = a > b ? a : b;
int n = c > d ? c : d;
if ( a - b <= 33 && a - b >= -33 )
m *= 2;
if ( c - d <= 33 && c - d >= -33 )
n *= 2;
x = FT_MulFix( x, m );
y = FT_MulFix( y, n );
#else /* 1 */
/*******************************************************************/
/* */
/* This algorithm is a guess and works much better than the above. */
/* */
FT_Fixed mac_xscale = FT_Hypot( subglyph->transform.xx,
subglyph->transform.xy );
FT_Fixed mac_yscale = FT_Hypot( subglyph->transform.yy,
subglyph->transform.yx );
x = FT_MulFix( x, mac_xscale );
y = FT_MulFix( y, mac_yscale );
#endif /* 1 */
}
if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
{
FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale;
FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale;
x = FT_MulFix( x, x_scale );
y = FT_MulFix( y, y_scale );
if ( subglyph->flags & ROUND_XY_TO_GRID )
{
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
}
}
if ( x || y )
translate_array( num_points - num_base_points,
base_vec + num_base_points,
x, y );
return FT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Process_Composite_Glyph */
/* */
/* <Description> */
/* This is slightly different from TT_Process_Simple_Glyph, in that */
/* its sole purpose is to hint the glyph. Thus this function is */
/* only available when bytecode interpreter is enabled. */
/* */
static FT_Error
TT_Process_Composite_Glyph( TT_Loader loader,
FT_UInt start_point,
FT_UInt start_contour )
{
FT_Error error;
FT_Outline* outline;
FT_UInt i;
outline = &loader->gloader->base.outline;
/* make room for phantom points */
error = FT_GLYPHLOADER_CHECK_POINTS( loader->gloader,
outline->n_points + 4,
0 );
if ( error )
return error;
outline->points[outline->n_points ] = loader->pp1;
outline->points[outline->n_points + 1] = loader->pp2;
outline->points[outline->n_points + 2] = loader->pp3;
outline->points[outline->n_points + 3] = loader->pp4;
outline->tags[outline->n_points ] = 0;
outline->tags[outline->n_points + 1] = 0;
outline->tags[outline->n_points + 2] = 0;
outline->tags[outline->n_points + 3] = 0;
#ifdef TT_USE_BYTECODE_INTERPRETER
{
FT_Stream stream = loader->stream;
FT_UShort n_ins, max_ins;
FT_ULong tmp;
/* TT_Load_Composite_Glyph only gives us the offset of instructions */
/* so we read them here */
if ( FT_STREAM_SEEK( loader->ins_pos ) ||
FT_READ_USHORT( n_ins ) )
return error;
FT_TRACE5(( " Instructions size = %d\n", n_ins ));
/* check it */
max_ins = ((TT_Face)loader->face)->max_profile.maxSizeOfInstructions;
if ( n_ins > max_ins )
{
/* don't trust `maxSizeOfInstructions'; */
/* only do a rough safety check */
if ( (FT_Int)n_ins > loader->byte_len )
{
FT_TRACE1(( "TT_Process_Composite_Glyph:"
" too many instructions (%d) for glyph with length %d\n",
n_ins, loader->byte_len ));
return FT_THROW( Too_Many_Hints );
}
tmp = loader->exec->glyphSize;
error = Update_Max( loader->exec->memory,
&tmp,
sizeof ( FT_Byte ),
(void*)&loader->exec->glyphIns,
n_ins );
loader->exec->glyphSize = (FT_UShort)tmp;
if ( error )
return error;
}
else if ( n_ins == 0 )
return FT_Err_Ok;
if ( FT_STREAM_READ( loader->exec->glyphIns, n_ins ) )
return error;
loader->glyph->control_data = loader->exec->glyphIns;
loader->glyph->control_len = n_ins;
}
#endif
tt_prepare_zone( &loader->zone, &loader->gloader->base,
start_point, start_contour );
/* Some points are likely touched during execution of */
/* instructions on components. So let's untouch them. */
for ( i = 0; i < loader->zone.n_points; i++ )
loader->zone.tags[i] &= ~FT_CURVE_TAG_TOUCH_BOTH;
loader->zone.n_points += 4;
return TT_Hint_Glyph( loader, 1 );
}
/*
* Calculate the phantom points
*
* Defining the right side bearing (rsb) as
*
* rsb = aw - (lsb + xmax - xmin)
*
* (with `aw' the advance width, `lsb' the left side bearing, and `xmin'
* and `xmax' the glyph's minimum and maximum x value), the OpenType
* specification defines the initial position of horizontal phantom points
* as
*
* pp1 = (round(xmin - lsb), 0) ,
* pp2 = (round(pp1 + aw), 0) .
*
* Note that the rounding to the grid (in the device space) is not
* documented currently in the specification.
*
* However, the specification lacks the precise definition of vertical
* phantom points. Greg Hitchcock provided the following explanation.
*
* - a `vmtx' table is present
*
* For any glyph, the minimum and maximum y values (`ymin' and `ymax')
* are given in the `glyf' table, the top side bearing (tsb) and advance
* height (ah) are given in the `vmtx' table. The bottom side bearing
* (bsb) is then calculated as
*
* bsb = ah - (tsb + ymax - ymin) ,
*
* and the initial position of vertical phantom points is
*
* pp3 = (x, round(ymax + tsb)) ,
* pp4 = (x, round(pp3 - ah)) .
*
* See below for value `x'.
*
* - no `vmtx' table in the font
*
* If there is an `OS/2' table, we set
*
* DefaultAscender = sTypoAscender ,
* DefaultDescender = sTypoDescender ,
*
* otherwise we use data from the `hhea' table:
*
* DefaultAscender = Ascender ,
* DefaultDescender = Descender .
*
* With these two variables we can now set
*
* ah = DefaultAscender - sDefaultDescender ,
* tsb = DefaultAscender - yMax ,
*
* and proceed as if a `vmtx' table was present.
*
* Usually we have
*
* x = aw / 2 , (1)
*
* but there is one compatibility case where it can be set to
*
* x = -DefaultDescender -
* ((DefaultAscender - DefaultDescender - aw) / 2) . (2)
*
* and another one with
*
* x = 0 . (3)
*
* In Windows, the history of those values is quite complicated,
* depending on the hinting engine (that is, the graphics framework).
*
* framework from to formula
* ----------------------------------------------------------
* GDI Windows 98 current (1)
* (Windows 2000 for NT)
* GDI+ Windows XP Windows 7 (2)
* GDI+ Windows 8 current (3)
* DWrite Windows 7 current (3)
*
* For simplicity, FreeType uses (1) for grayscale subpixel hinting and
* (3) for everything else.
*
*/
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
#define TT_LOADER_SET_PP( loader ) \
do \
{ \
FT_Bool subpixel_hinting_ = loader->exec \
? loader->exec->subpixel_hinting \
: 0; \
FT_Bool grayscale_ = loader->exec \
? loader->exec->grayscale \
: 0; \
FT_Bool use_aw_2_ = (FT_Bool)( subpixel_hinting_ && \
grayscale_ ); \
\
\
(loader)->pp1.x = (loader)->bbox.xMin - (loader)->left_bearing; \
(loader)->pp1.y = 0; \
(loader)->pp2.x = (loader)->pp1.x + (loader)->advance; \
(loader)->pp2.y = 0; \
\
(loader)->pp3.x = use_aw_2_ ? (loader)->advance / 2 : 0; \
(loader)->pp3.y = (loader)->bbox.yMax + (loader)->top_bearing; \
(loader)->pp4.x = use_aw_2_ ? (loader)->advance / 2 : 0; \
(loader)->pp4.y = (loader)->pp3.y - (loader)->vadvance; \
} while ( 0 )
#else /* !TT_CONFIG_OPTION_SUBPIXEL_HINTING */
#define TT_LOADER_SET_PP( loader ) \
do \
{ \
(loader)->pp1.x = (loader)->bbox.xMin - (loader)->left_bearing; \
(loader)->pp1.y = 0; \
(loader)->pp2.x = (loader)->pp1.x + (loader)->advance; \
(loader)->pp2.y = 0; \
\
(loader)->pp3.x = 0; \
(loader)->pp3.y = (loader)->bbox.yMax + (loader)->top_bearing; \
(loader)->pp4.x = 0; \
(loader)->pp4.y = (loader)->pp3.y - (loader)->vadvance; \
} while ( 0 )
#endif /* !TT_CONFIG_OPTION_SUBPIXEL_HINTING */
/*************************************************************************/
/* */
/* <Function> */
/* load_truetype_glyph */
/* */
/* <Description> */
/* Loads a given truetype glyph. Handles composites and uses a */
/* TT_Loader object. */
/* */
static FT_Error
load_truetype_glyph( TT_Loader loader,
FT_UInt glyph_index,
FT_UInt recurse_count,
FT_Bool header_only )
{
FT_Error error = FT_Err_Ok;
FT_Fixed x_scale, y_scale;
FT_ULong offset;
TT_Face face = (TT_Face)loader->face;
FT_GlyphLoader gloader = loader->gloader;
FT_Bool opened_frame = 0;
#ifdef FT_CONFIG_OPTION_INCREMENTAL
FT_StreamRec inc_stream;
FT_Data glyph_data;
FT_Bool glyph_data_loaded = 0;
#endif
/* some fonts have an incorrect value of `maxComponentDepth', */
/* thus we allow depth 1 to catch the majority of them */
if ( recurse_count > 1 &&
recurse_count > face->max_profile.maxComponentDepth )
{
error = FT_THROW( Invalid_Composite );
goto Exit;
}
#ifndef FT_CONFIG_OPTION_INCREMENTAL
/* check glyph index */
if ( glyph_index >= (FT_UInt)face->root.num_glyphs )
{
error = FT_THROW( Invalid_Glyph_Index );
goto Exit;
}
#endif
loader->glyph_index = glyph_index;
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
x_scale = ((TT_Size)loader->size)->metrics.x_scale;
y_scale = ((TT_Size)loader->size)->metrics.y_scale;
}
else
{
x_scale = 0x10000L;
y_scale = 0x10000L;
}
/* Set `offset' to the start of the glyph relative to the start of */
/* the `glyf' table, and `byte_len' to the length of the glyph in */
/* bytes. */
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* If we are loading glyph data via the incremental interface, set */
/* the loader stream to a memory stream reading the data returned */
/* by the interface. */
if ( face->root.internal->incremental_interface )
{
error = face->root.internal->incremental_interface->funcs->get_glyph_data(
face->root.internal->incremental_interface->object,
glyph_index, &glyph_data );
if ( error )
goto Exit;
glyph_data_loaded = 1;
offset = 0;
loader->byte_len = glyph_data.length;
FT_MEM_ZERO( &inc_stream, sizeof ( inc_stream ) );
FT_Stream_OpenMemory( &inc_stream,
glyph_data.pointer,
(FT_ULong)glyph_data.length );
loader->stream = &inc_stream;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
offset = tt_face_get_location( face, glyph_index,
(FT_UInt*)&loader->byte_len );
if ( loader->byte_len > 0 )
{
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* for the incremental interface, `glyf_offset' is always zero */
if ( !loader->glyf_offset &&
!face->root.internal->incremental_interface )
#else
if ( !loader->glyf_offset )
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
{
FT_TRACE2(( "no `glyf' table but non-zero `loca' entry\n" ));
error = FT_THROW( Invalid_Table );
goto Exit;
}
error = face->access_glyph_frame( loader, glyph_index,
loader->glyf_offset + offset,
(FT_UInt)loader->byte_len );
if ( error )
goto Exit;
opened_frame = 1;
/* read glyph header first */
error = face->read_glyph_header( loader );
if ( error )
goto Exit;
/* the metrics must be computed after loading the glyph header */
/* since we need the glyph's `yMax' value in case the vertical */
/* metrics must be emulated */
error = tt_get_metrics( loader, glyph_index );
if ( error )
goto Exit;
if ( header_only )
goto Exit;
}
if ( loader->byte_len == 0 || loader->n_contours == 0 )
{
loader->bbox.xMin = 0;
loader->bbox.xMax = 0;
loader->bbox.yMin = 0;
loader->bbox.yMax = 0;
error = tt_get_metrics( loader, glyph_index );
if ( error )
goto Exit;
if ( header_only )
goto Exit;
/* must initialize points before (possibly) overriding */
/* glyph metrics from the incremental interface */
TT_LOADER_SET_PP( loader );
#ifdef FT_CONFIG_OPTION_INCREMENTAL
tt_get_metrics_incr_overrides( loader, glyph_index );
#endif
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
if ( ((TT_Face)(loader->face))->doblend )
{
/* a small outline structure with four elements for */
/* communication with `TT_Vary_Apply_Glyph_Deltas' */
FT_Vector points[4];
char tags[4] = { 1, 1, 1, 1 };
short contours[4] = { 0, 1, 2, 3 };
FT_Outline outline;
points[0].x = loader->pp1.x;
points[0].y = loader->pp1.y;
points[1].x = loader->pp2.x;
points[1].y = loader->pp2.y;
points[2].x = loader->pp3.x;
points[2].y = loader->pp3.y;
points[3].x = loader->pp4.x;
points[3].y = loader->pp4.y;
outline.n_points = 4;
outline.n_contours = 4;
outline.points = points;
outline.tags = tags;
outline.contours = contours;
/* this must be done before scaling */
error = TT_Vary_Apply_Glyph_Deltas( (TT_Face)(loader->face),
glyph_index,
&outline,
outline.n_points );
if ( error )
goto Exit;
loader->pp1.x = points[0].x;
loader->pp1.y = points[0].y;
loader->pp2.x = points[1].x;
loader->pp2.y = points[1].y;
loader->pp3.x = points[2].x;
loader->pp3.y = points[2].y;
loader->pp4.x = points[3].x;
loader->pp4.y = points[3].y;
}
#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
/* scale phantom points, if necessary; */
/* they get rounded in `TT_Hint_Glyph' */
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
/* pp1.y and pp2.y are always zero */
loader->pp3.x = FT_MulFix( loader->pp3.x, x_scale );
loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
loader->pp4.x = FT_MulFix( loader->pp4.x, x_scale );
loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
}
error = FT_Err_Ok;
goto Exit;
}
/* must initialize phantom points before (possibly) overriding */
/* glyph metrics from the incremental interface */
TT_LOADER_SET_PP( loader );
#ifdef FT_CONFIG_OPTION_INCREMENTAL
tt_get_metrics_incr_overrides( loader, glyph_index );
#endif
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/* if it is a simple glyph, load it */
if ( loader->n_contours > 0 )
{
error = face->read_simple_glyph( loader );
if ( error )
goto Exit;
/* all data have been read */
face->forget_glyph_frame( loader );
opened_frame = 0;
error = TT_Process_Simple_Glyph( loader );
if ( error )
goto Exit;
FT_GlyphLoader_Add( gloader );
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/* otherwise, load a composite! */
else if ( loader->n_contours == -1 )
{
FT_UInt start_point;
FT_UInt start_contour;
FT_ULong ins_pos; /* position of composite instructions, if any */
start_point = (FT_UInt)gloader->base.outline.n_points;
start_contour = (FT_UInt)gloader->base.outline.n_contours;
/* for each subglyph, read composite header */
error = face->read_composite_glyph( loader );
if ( error )
goto Exit;
/* store the offset of instructions */
ins_pos = loader->ins_pos;
/* all data we need are read */
face->forget_glyph_frame( loader );
opened_frame = 0;
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
if ( face->doblend )
{
FT_UInt i, limit;
FT_SubGlyph subglyph;
FT_Outline outline;
FT_Vector* points = NULL;
char* tags = NULL;
short* contours = NULL;
FT_Memory memory = face->root.memory;
limit = gloader->current.num_subglyphs;
/* construct an outline structure for */
/* communication with `TT_Vary_Apply_Glyph_Deltas' */
outline.n_points = gloader->current.num_subglyphs + 4;
outline.n_contours = outline.n_points;
if ( FT_NEW_ARRAY( points, outline.n_points ) ||
FT_NEW_ARRAY( tags, outline.n_points ) ||
FT_NEW_ARRAY( contours, outline.n_points ) )
goto Exit1;
subglyph = gloader->current.subglyphs + gloader->base.num_subglyphs;
for ( i = 0; i < limit; i++, subglyph++ )
{
/* applying deltas for anchor points doesn't make sense, */
/* but we don't have to specially check this since */
/* unused delta values are zero anyways */
points[i].x = subglyph->arg1;
points[i].y = subglyph->arg2;
tags[i] = 1;
contours[i] = i;
}
points[i].x = loader->pp1.x;
points[i].y = loader->pp1.y;
tags[i] = 1;
contours[i] = i;
i++;
points[i].x = loader->pp2.x;
points[i].y = loader->pp2.y;
tags[i] = 1;
contours[i] = i;
i++;
points[i].x = loader->pp3.x;
points[i].y = loader->pp3.y;
tags[i] = 1;
contours[i] = i;
i++;
points[i].x = loader->pp4.x;
points[i].y = loader->pp4.y;
tags[i] = 1;
contours[i] = i;
outline.points = points;
outline.tags = tags;
outline.contours = contours;
/* this call provides additional offsets */
/* for each component's translation */
if ( ( error = TT_Vary_Apply_Glyph_Deltas(
face,
glyph_index,
&outline,
outline.n_points ) ) != 0 )
goto Exit1;
subglyph = gloader->current.subglyphs + gloader->base.num_subglyphs;
for ( i = 0; i < limit; i++, subglyph++ )
{
/* XXX: overflow check for subglyph->{arg1,arg2}. */
/* Deltas must be within signed 16-bit, */
/* but the restriction of summed deltas is not clear */
subglyph->arg1 = (FT_Int16)points[i].x;
subglyph->arg2 = (FT_Int16)points[i].y;
}
loader->pp1.x = points[i + 0].x;
loader->pp1.y = points[i + 0].y;
loader->pp2.x = points[i + 1].x;
loader->pp2.y = points[i + 1].y;
loader->pp3.x = points[i + 2].x;
loader->pp3.y = points[i + 2].y;
loader->pp4.x = points[i + 3].x;
loader->pp4.y = points[i + 3].y;
Exit1:
FT_FREE( outline.points );
FT_FREE( outline.tags );
FT_FREE( outline.contours );
if ( error )
goto Exit;
}
#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
/* scale phantom points, if necessary; */
/* they get rounded in `TT_Hint_Glyph' */
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
/* pp1.y and pp2.y are always zero */
loader->pp3.x = FT_MulFix( loader->pp3.x, x_scale );
loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
loader->pp4.x = FT_MulFix( loader->pp4.x, x_scale );
loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
}
/* if the flag FT_LOAD_NO_RECURSE is set, we return the subglyph */
/* `as is' in the glyph slot (the client application will be */
/* responsible for interpreting these data)... */
if ( loader->load_flags & FT_LOAD_NO_RECURSE )
{
FT_GlyphLoader_Add( gloader );
loader->glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
goto Exit;
}
/*********************************************************************/
/*********************************************************************/
/*********************************************************************/
{
FT_UInt n, num_base_points;
FT_SubGlyph subglyph = NULL;
FT_UInt num_points = start_point;
FT_UInt num_subglyphs = gloader->current.num_subglyphs;
FT_UInt num_base_subgs = gloader->base.num_subglyphs;
FT_Stream old_stream = loader->stream;
FT_Int old_byte_len = loader->byte_len;
FT_GlyphLoader_Add( gloader );
/* read each subglyph independently */
for ( n = 0; n < num_subglyphs; n++ )
{
FT_Vector pp[4];
/* Each time we call load_truetype_glyph in this loop, the */
/* value of `gloader.base.subglyphs' can change due to table */
/* reallocations. We thus need to recompute the subglyph */
/* pointer on each iteration. */
subglyph = gloader->base.subglyphs + num_base_subgs + n;
pp[0] = loader->pp1;
pp[1] = loader->pp2;
pp[2] = loader->pp3;
pp[3] = loader->pp4;
num_base_points = (FT_UInt)gloader->base.outline.n_points;
error = load_truetype_glyph( loader,
(FT_UInt)subglyph->index,
recurse_count + 1,
FALSE );
if ( error )
goto Exit;
/* restore subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + n;
/* restore phantom points if necessary */
if ( !( subglyph->flags & USE_MY_METRICS ) )
{
loader->pp1 = pp[0];
loader->pp2 = pp[1];
loader->pp3 = pp[2];
loader->pp4 = pp[3];
}
num_points = (FT_UInt)gloader->base.outline.n_points;
if ( num_points == num_base_points )
continue;
/* gloader->base.outline consists of three parts: */
/* 0 -(1)-> start_point -(2)-> num_base_points -(3)-> n_points. */
/* */
/* (1): exists from the beginning */
/* (2): components that have been loaded so far */
/* (3): the newly loaded component */
error = TT_Process_Composite_Component( loader,
subglyph,
start_point,
num_base_points );
if ( error )
goto Exit;
}
loader->stream = old_stream;
loader->byte_len = old_byte_len;
/* process the glyph */
loader->ins_pos = ins_pos;
if ( IS_HINTED( loader->load_flags ) &&
#ifdef TT_USE_BYTECODE_INTERPRETER
subglyph->flags & WE_HAVE_INSTR &&
#endif
num_points > start_point )
{
error = TT_Process_Composite_Glyph( loader,
start_point,
start_contour );
if ( error )
goto Exit;
}
}
}
else
{
/* invalid composite count (negative but not -1) */
error = FT_THROW( Invalid_Outline );
goto Exit;
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
Exit:
if ( opened_frame )
face->forget_glyph_frame( loader );
#ifdef FT_CONFIG_OPTION_INCREMENTAL
if ( glyph_data_loaded )
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object,
&glyph_data );
#endif
return error;
}
static FT_Error
compute_glyph_metrics( TT_Loader loader,
FT_UInt glyph_index )
{
TT_Face face = (TT_Face)loader->face;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( face );
#endif
FT_BBox bbox;
FT_Fixed y_scale;
TT_GlyphSlot glyph = loader->glyph;
TT_Size size = (TT_Size)loader->size;
y_scale = 0x10000L;
if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
y_scale = size->root.metrics.y_scale;
if ( glyph->format != FT_GLYPH_FORMAT_COMPOSITE )
FT_Outline_Get_CBox( &glyph->outline, &bbox );
else
bbox = loader->bbox;
/* get the device-independent horizontal advance; it is scaled later */
/* by the base layer. */
glyph->linearHoriAdvance = loader->linear;
glyph->metrics.horiBearingX = bbox.xMin;
glyph->metrics.horiBearingY = bbox.yMax;
glyph->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
/* adjust advance width to the value contained in the hdmx table */
if ( !face->postscript.isFixedPitch &&
IS_HINTED( loader->load_flags ) )
{
FT_Byte* widthp;
widthp = tt_face_get_device_metrics( face,
size->root.metrics.x_ppem,
glyph_index );
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 )
{
FT_Bool ignore_x_mode;
ignore_x_mode = FT_BOOL( FT_LOAD_TARGET_MODE( loader->load_flags ) !=
FT_RENDER_MODE_MONO );
if ( widthp &&
( ( ignore_x_mode && loader->exec->compatible_widths ) ||
!ignore_x_mode ||
SPH_OPTION_BITMAP_WIDTHS ) )
glyph->metrics.horiAdvance = *widthp << 6;
}
else
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
{
if ( widthp )
glyph->metrics.horiAdvance = *widthp << 6;
}
}
/* set glyph dimensions */
glyph->metrics.width = bbox.xMax - bbox.xMin;
glyph->metrics.height = bbox.yMax - bbox.yMin;
/* Now take care of vertical metrics. In the case where there is */
/* no vertical information within the font (relatively common), */
/* create some metrics manually */
{
FT_Pos top; /* scaled vertical top side bearing */
FT_Pos advance; /* scaled vertical advance height */
/* Get the unscaled top bearing and advance height. */
if ( face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 )
{
top = (FT_Short)FT_DivFix( loader->pp3.y - bbox.yMax,
y_scale );
if ( loader->pp3.y <= loader->pp4.y )
advance = 0;
else
advance = (FT_UShort)FT_DivFix( loader->pp3.y - loader->pp4.y,
y_scale );
}
else
{
FT_Pos height;
/* XXX Compute top side bearing and advance height in */
/* Get_VMetrics instead of here. */
/* NOTE: The OS/2 values are the only `portable' ones, */
/* which is why we use them, if there is an OS/2 */
/* table in the font. Otherwise, we use the */
/* values defined in the horizontal header. */
height = (FT_Short)FT_DivFix( bbox.yMax - bbox.yMin,
y_scale );
if ( face->os2.version != 0xFFFFU )
advance = (FT_Pos)( face->os2.sTypoAscender -
face->os2.sTypoDescender );
else
advance = (FT_Pos)( face->horizontal.Ascender -
face->horizontal.Descender );
top = ( advance - height ) / 2;
}
#ifdef FT_CONFIG_OPTION_INCREMENTAL
{
FT_Incremental_InterfaceRec* incr;
FT_Incremental_MetricsRec metrics;
FT_Error error;
incr = face->root.internal->incremental_interface;
/* If this is an incrementally loaded font see if there are */
/* overriding metrics for this glyph. */
if ( incr && incr->funcs->get_glyph_metrics )
{
metrics.bearing_x = 0;
metrics.bearing_y = top;
metrics.advance = advance;
error = incr->funcs->get_glyph_metrics( incr->object,
glyph_index,
TRUE,
&metrics );
if ( error )
return error;
top = metrics.bearing_y;
advance = metrics.advance;
}
}
/* GWW: Do vertical metrics get loaded incrementally too? */
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
glyph->linearVertAdvance = advance;
/* scale the metrics */
if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
{
top = FT_MulFix( top, y_scale );
advance = FT_MulFix( advance, y_scale );
}
/* XXX: for now, we have no better algorithm for the lsb, but it */
/* should work fine. */
/* */
glyph->metrics.vertBearingX = glyph->metrics.horiBearingX -
glyph->metrics.horiAdvance / 2;
glyph->metrics.vertBearingY = top;
glyph->metrics.vertAdvance = advance;
}
return 0;
}
#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
static FT_Error
load_sbit_image( TT_Size size,
TT_GlyphSlot glyph,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
TT_Face face;
SFNT_Service sfnt;
FT_Stream stream;
FT_Error error;
TT_SBit_MetricsRec metrics;
face = (TT_Face)glyph->face;
sfnt = (SFNT_Service)face->sfnt;
stream = face->root.stream;
error = sfnt->load_sbit_image( face,
size->strike_index,
glyph_index,
(FT_UInt)load_flags,
stream,
&glyph->bitmap,
&metrics );
if ( !error )
{
glyph->outline.n_points = 0;
glyph->outline.n_contours = 0;
glyph->metrics.width = (FT_Pos)metrics.width << 6;
glyph->metrics.height = (FT_Pos)metrics.height << 6;
glyph->metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
glyph->metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
glyph->metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
glyph->metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
glyph->metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
glyph->metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
glyph->format = FT_GLYPH_FORMAT_BITMAP;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
glyph->bitmap_left = metrics.vertBearingX;
glyph->bitmap_top = metrics.vertBearingY;
}
else
{
glyph->bitmap_left = metrics.horiBearingX;
glyph->bitmap_top = metrics.horiBearingY;
}
}
return error;
}
#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
static FT_Error
tt_loader_init( TT_Loader loader,
TT_Size size,
TT_GlyphSlot glyph,
FT_Int32 load_flags,
FT_Bool glyf_table_only )
{
FT_Error error;
TT_Face face;
FT_Stream stream;
#ifdef TT_USE_BYTECODE_INTERPRETER
FT_Bool pedantic = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
#endif
face = (TT_Face)glyph->face;
stream = face->root.stream;
FT_MEM_ZERO( loader, sizeof ( TT_LoaderRec ) );
#ifdef TT_USE_BYTECODE_INTERPRETER
/* load execution context */
if ( IS_HINTED( load_flags ) && !glyf_table_only )
{
TT_ExecContext exec;
FT_Bool grayscale;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( face );
FT_Bool subpixel_hinting = FALSE;
#if 0
/* not used yet */
FT_Bool compatible_widths;
FT_Bool symmetrical_smoothing;
FT_Bool bgr;
FT_Bool vertical_lcd;
FT_Bool subpixel_positioned;
FT_Bool gray_cleartype;
#endif
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
FT_Bool reexecute = FALSE;
if ( size->bytecode_ready < 0 || size->cvt_ready < 0 )
{
error = tt_size_ready_bytecode( size, pedantic );
if ( error )
return error;
}
else if ( size->bytecode_ready )
return size->bytecode_ready;
else if ( size->cvt_ready )
return size->cvt_ready;
/* query new execution context */
exec = size->context;
if ( !exec )
return FT_THROW( Could_Not_Find_Context );
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 )
{
subpixel_hinting = FT_BOOL( ( FT_LOAD_TARGET_MODE( load_flags ) !=
FT_RENDER_MODE_MONO ) &&
SPH_OPTION_SET_SUBPIXEL );
if ( subpixel_hinting )
grayscale = FALSE;
else if ( SPH_OPTION_SET_GRAYSCALE )
{
grayscale = TRUE;
subpixel_hinting = FALSE;
}
else
grayscale = FALSE;
if ( FT_IS_TRICKY( glyph->face ) )
subpixel_hinting = FALSE;
exec->ignore_x_mode = subpixel_hinting || grayscale;
exec->rasterizer_version = SPH_OPTION_SET_RASTERIZER_VERSION;
if ( exec->sph_tweak_flags & SPH_TWEAK_RASTERIZER_35 )
exec->rasterizer_version = TT_INTERPRETER_VERSION_35;
#if 1
exec->compatible_widths = SPH_OPTION_SET_COMPATIBLE_WIDTHS;
exec->symmetrical_smoothing = TRUE;
exec->bgr = FALSE;
exec->vertical_lcd = FALSE;
exec->subpixel_positioned = TRUE;
exec->gray_cleartype = FALSE;
#else /* 0 */
exec->compatible_widths =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_COMPATIBLE_WIDTHS );
exec->symmetrical_smoothing =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_SYMMETRICAL_SMOOTHING );
exec->bgr =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_BGR );
exec->vertical_lcd =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_VERTICAL_LCD );
exec->subpixel_positioned =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_SUBPIXEL_POSITIONED );
exec->gray_cleartype =
FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
TT_LOAD_GRAY_CLEARTYPE );
#endif /* 0 */
}
else
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
{
grayscale = FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) !=
FT_RENDER_MODE_MONO );
}
error = TT_Load_Context( exec, face, size );
if ( error )
return error;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
if ( driver->interpreter_version == TT_INTERPRETER_VERSION_38 )
{
/* a change from mono to subpixel rendering (and vice versa) */
/* requires a re-execution of the CVT program */
if ( subpixel_hinting != exec->subpixel_hinting )
{
FT_TRACE4(( "tt_loader_init: subpixel hinting change,"
" re-executing `prep' table\n" ));
exec->subpixel_hinting = subpixel_hinting;
reexecute = TRUE;
}
/* a change from mono to grayscale rendering (and vice versa) */
/* requires a re-execution of the CVT program */
if ( grayscale != exec->grayscale )
{
FT_TRACE4(( "tt_loader_init: grayscale hinting change,"
" re-executing `prep' table\n" ));
exec->grayscale = grayscale;
reexecute = TRUE;
}
}
else
#endif /* TT_CONFIG_OPTION_SUBPIXEL_HINTING */
{
/* a change from mono to grayscale rendering (and vice versa) */
/* requires a re-execution of the CVT program */
if ( grayscale != exec->grayscale )
{
FT_TRACE4(( "tt_loader_init: grayscale hinting change,"
" re-executing `prep' table\n" ));
exec->grayscale = grayscale;
reexecute = TRUE;
}
}
if ( reexecute )
{
FT_UInt i;
for ( i = 0; i < size->cvt_size; i++ )
size->cvt[i] = FT_MulFix( face->cvt[i], size->ttmetrics.scale );
error = tt_size_run_prep( size, pedantic );
if ( error )
return error;
}
/* check whether the cvt program has disabled hinting */
if ( exec->GS.instruct_control & 1 )
load_flags |= FT_LOAD_NO_HINTING;
/* load default graphics state -- if needed */
if ( exec->GS.instruct_control & 2 )
exec->GS = tt_default_graphics_state;
#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING
/* check whether we have a font hinted for ClearType -- */
/* note that this flag can also be modified in a glyph's bytecode */
if ( exec->GS.instruct_control & 4 )
exec->ignore_x_mode = 0;
#endif
exec->pedantic_hinting = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
loader->exec = exec;
loader->instructions = exec->glyphIns;
}
#endif /* TT_USE_BYTECODE_INTERPRETER */
/* seek to the beginning of the glyph table -- for Type 42 fonts */
/* the table might be accessed from a Postscript stream or something */
/* else... */
#ifdef FT_CONFIG_OPTION_INCREMENTAL
if ( face->root.internal->incremental_interface )
loader->glyf_offset = 0;
else
#endif
{
error = face->goto_table( face, TTAG_glyf, stream, 0 );
if ( FT_ERR_EQ( error, Table_Missing ) )
loader->glyf_offset = 0;
else if ( error )
{
FT_ERROR(( "tt_loader_init: could not access glyph table\n" ));
return error;
}
else
loader->glyf_offset = FT_STREAM_POS();
}
/* get face's glyph loader */
if ( !glyf_table_only )
{
FT_GlyphLoader gloader = glyph->internal->loader;
FT_GlyphLoader_Rewind( gloader );
loader->gloader = gloader;
}
loader->load_flags = (FT_ULong)load_flags;
loader->face = (FT_Face)face;
loader->size = (FT_Size)size;
loader->glyph = (FT_GlyphSlot)glyph;
loader->stream = stream;
return FT_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* TT_Load_Glyph */
/* */
/* <Description> */
/* A function used to load a single glyph within a given glyph slot, */
/* for a given size. */
/* */
/* <Input> */
/* glyph :: A handle to a target slot object where the glyph */
/* will be loaded. */
/* */
/* size :: A handle to the source face size at which the glyph */
/* must be scaled/loaded. */
/* */
/* glyph_index :: The index of the glyph in the font file. */
/* */
/* load_flags :: A flag indicating what to load for this glyph. The */
/* FT_LOAD_XXX constants can be used to control the */
/* glyph loading process (e.g., whether the outline */
/* should be scaled, whether to load bitmaps or not, */
/* whether to hint the outline, etc). */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
TT_Load_Glyph( TT_Size size,
TT_GlyphSlot glyph,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
TT_LoaderRec loader;
FT_TRACE1(( "TT_Load_Glyph: glyph index %d\n", glyph_index ));
#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/* try to load embedded bitmap if any */
/* */
/* XXX: The convention should be emphasized in */
/* the documents because it can be confusing. */
if ( size->strike_index != 0xFFFFFFFFUL &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
error = load_sbit_image( size, glyph, glyph_index, load_flags );
if ( !error )
{
if ( FT_IS_SCALABLE( glyph->face ) )
{
/* for the bbox we need the header only */
(void)tt_loader_init( &loader, size, glyph, load_flags, TRUE );
(void)load_truetype_glyph( &loader, glyph_index, 0, TRUE );
glyph->linearHoriAdvance = loader.linear;
glyph->linearVertAdvance = loader.vadvance;
/* sanity checks: if `xxxAdvance' in the sbit metric */
/* structure isn't set, use `linearXXXAdvance' */
if ( !glyph->metrics.horiAdvance && glyph->linearHoriAdvance )
glyph->metrics.horiAdvance =
FT_MulFix( glyph->linearHoriAdvance,
size->root.metrics.x_scale );
if ( !glyph->metrics.vertAdvance && glyph->linearVertAdvance )
glyph->metrics.vertAdvance =
FT_MulFix( glyph->linearVertAdvance,
size->root.metrics.y_scale );
}
return FT_Err_Ok;
}
}
#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
/* if FT_LOAD_NO_SCALE is not set, `ttmetrics' must be valid */
if ( !( load_flags & FT_LOAD_NO_SCALE ) && !size->ttmetrics.valid )
return FT_THROW( Invalid_Size_Handle );
if ( load_flags & FT_LOAD_SBITS_ONLY )
return FT_THROW( Invalid_Argument );
error = tt_loader_init( &loader, size, glyph, load_flags, FALSE );
if ( error )
return error;
glyph->format = FT_GLYPH_FORMAT_OUTLINE;
glyph->num_subglyphs = 0;
glyph->outline.flags = 0;
/* main loading loop */
error = load_truetype_glyph( &loader, glyph_index, 0, FALSE );
if ( !error )
{
if ( glyph->format == FT_GLYPH_FORMAT_COMPOSITE )
{
glyph->num_subglyphs = loader.gloader->base.num_subglyphs;
glyph->subglyphs = loader.gloader->base.subglyphs;
}
else
{
glyph->outline = loader.gloader->base.outline;
glyph->outline.flags &= ~FT_OUTLINE_SINGLE_PASS;
/* Translate array so that (0,0) is the glyph's origin. Note */
/* that this behaviour is independent on the value of bit 1 of */
/* the `flags' field in the `head' table -- at least major */
/* applications like Acroread indicate that. */
if ( loader.pp1.x )
FT_Outline_Translate( &glyph->outline, -loader.pp1.x, 0 );
}
#ifdef TT_USE_BYTECODE_INTERPRETER
if ( IS_HINTED( load_flags ) )
{
if ( loader.exec->GS.scan_control )
{
/* convert scan conversion mode to FT_OUTLINE_XXX flags */
switch ( loader.exec->GS.scan_type )
{
case 0: /* simple drop-outs including stubs */
glyph->outline.flags |= FT_OUTLINE_INCLUDE_STUBS;
break;
case 1: /* simple drop-outs excluding stubs */
/* nothing; it's the default rendering mode */
break;
case 4: /* smart drop-outs including stubs */
glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS |
FT_OUTLINE_INCLUDE_STUBS;
break;
case 5: /* smart drop-outs excluding stubs */
glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS;
break;
default: /* no drop-out control */
glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
break;
}
}
else
glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
}
#endif /* TT_USE_BYTECODE_INTERPRETER */
error = compute_glyph_metrics( &loader, glyph_index );
}
/* Set the `high precision' bit flag. */
/* This is _critical_ to get correct output for monochrome */
/* TrueType glyphs at all sizes using the bytecode interpreter. */
/* */
if ( !( load_flags & FT_LOAD_NO_SCALE ) &&
size->root.metrics.y_ppem < 24 )
glyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION;
return error;
}
/* END */