/***************************************************************************/
/*                                                                         */
/*  ttgxvar.c                                                              */
/*                                                                         */
/*    TrueType GX Font Variation loader                                    */
/*                                                                         */
/*  Copyright 2004-2015 by                                                 */
/*  David Turner, Robert Wilhelm, Werner Lemberg, and George Williams.     */
/*                                                                         */
/*  This file is part of the FreeType project, and may only be used,       */
/*  modified, and distributed under the terms of the FreeType project      */
/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
/*  this file you indicate that you have read the license and              */
/*  understand and accept it fully.                                        */
/*                                                                         */
/***************************************************************************/


  /*************************************************************************/
  /*                                                                       */
  /* Apple documents the `fvar', `gvar', `cvar', and `avar' tables at      */
  /*                                                                       */
  /*   https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6[fgca]var.html */
  /*                                                                       */
  /* The documentation for `fvar' is inconsistent.  At one point it says   */
  /* that `countSizePairs' should be 3, at another point 2.  It should     */
  /* be 2.                                                                 */
  /*                                                                       */
  /* The documentation for `gvar' is not intelligible; `cvar' refers you   */
  /* to `gvar' and is thus also incomprehensible.                          */
  /*                                                                       */
  /* The documentation for `avar' appears correct, but Apple has no fonts  */
  /* with an `avar' table, so it is hard to test.                          */
  /*                                                                       */
  /* Many thanks to John Jenkins (at Apple) in figuring this out.          */
  /*                                                                       */
  /*                                                                       */
  /* Apple's `kern' table has some references to tuple indices, but as     */
  /* there is no indication where these indices are defined, nor how to    */
  /* interpolate the kerning values (different tuples have different       */
  /* classes) this issue is ignored.                                       */
  /*                                                                       */
  /*************************************************************************/


#include <ft2build.h>
#include FT_INTERNAL_DEBUG_H
#include FT_CONFIG_CONFIG_H
#include FT_INTERNAL_STREAM_H
#include FT_INTERNAL_SFNT_H
#include FT_TRUETYPE_TAGS_H
#include FT_MULTIPLE_MASTERS_H

#include "ttpload.h"
#include "ttgxvar.h"

#include "tterrors.h"


#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT


#define FT_Stream_FTell( stream )                         \
          (FT_ULong)( (stream)->cursor - (stream)->base )
#define FT_Stream_SeekSet( stream, off )                  \
          ( (stream)->cursor = (stream)->base + (off) )


  /*************************************************************************/
  /*                                                                       */
  /* The macro FT_COMPONENT is used in trace mode.  It is an implicit      */
  /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log  */
  /* messages during execution.                                            */
  /*                                                                       */
#undef  FT_COMPONENT
#define FT_COMPONENT  trace_ttgxvar


  /*************************************************************************/
  /*************************************************************************/
  /*****                                                               *****/
  /*****                       Internal Routines                       *****/
  /*****                                                               *****/
  /*************************************************************************/
  /*************************************************************************/


  /*************************************************************************/
  /*                                                                       */
  /* The macro ALL_POINTS is used in `ft_var_readpackedpoints'.  It        */
  /* indicates that there is a delta for every point without needing to    */
  /* enumerate all of them.                                                */
  /*                                                                       */

  /* ensure that value `0' has the same width as a pointer */
#define ALL_POINTS  (FT_UShort*)~(FT_PtrDist)0


#define GX_PT_POINTS_ARE_WORDS      0x80U
#define GX_PT_POINT_RUN_COUNT_MASK  0x7FU


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    ft_var_readpackedpoints                                            */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Read a set of points to which the following deltas will apply.     */
  /*    Points are packed with a run length encoding.                      */
  /*                                                                       */
  /* <Input>                                                               */
  /*    stream    :: The data stream.                                      */
  /*                                                                       */
  /* <Output>                                                              */
  /*    point_cnt :: The number of points read.  A zero value means that   */
  /*                 all points in the glyph will be affected, without     */
  /*                 enumerating them individually.                        */
  /*                                                                       */
  /* <Return>                                                              */
  /*    An array of FT_UShort containing the affected points or the        */
  /*    special value ALL_POINTS.                                          */
  /*                                                                       */
  static FT_UShort*
  ft_var_readpackedpoints( FT_Stream  stream,
                           FT_UInt   *point_cnt )
  {
    FT_UShort *points = NULL;
    FT_UInt    n;
    FT_UInt    runcnt;
    FT_UInt    i, j;
    FT_UShort  first;
    FT_Memory  memory = stream->memory;
    FT_Error   error  = FT_Err_Ok;

    FT_UNUSED( error );


    *point_cnt = 0;

    n = FT_GET_BYTE();
    if ( n == 0 )
      return ALL_POINTS;

    if ( n & GX_PT_POINTS_ARE_WORDS )
    {
      n  &= GX_PT_POINT_RUN_COUNT_MASK;
      n <<= 8;
      n  |= FT_GET_BYTE();
    }

    if ( FT_NEW_ARRAY( points, n ) )
      return NULL;

    *point_cnt = n;

    i = 0;
    while ( i < n )
    {
      runcnt = FT_GET_BYTE();
      if ( runcnt & GX_PT_POINTS_ARE_WORDS )
      {
        runcnt     &= GX_PT_POINT_RUN_COUNT_MASK;
        first       = FT_GET_USHORT();
        points[i++] = first;

        if ( runcnt < 1 || i + runcnt > n )
          goto Exit;

        /* first point not included in run count */
        for ( j = 0; j < runcnt; j++ )
        {
          first      += FT_GET_USHORT();
          points[i++] = first;
        }
      }
      else
      {
        first       = FT_GET_BYTE();
        points[i++] = first;

        if ( runcnt < 1 || i + runcnt > n )
          goto Exit;

        for ( j = 0; j < runcnt; j++ )
        {
          first      += FT_GET_BYTE();
          points[i++] = first;
        }
      }
    }

  Exit:
    return points;
  }


#define GX_DT_DELTAS_ARE_ZERO       0x80U
#define GX_DT_DELTAS_ARE_WORDS      0x40U
#define GX_DT_DELTA_RUN_COUNT_MASK  0x3FU


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    ft_var_readpackeddeltas                                            */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Read a set of deltas.  These are packed slightly differently than  */
  /*    points.  In particular there is no overall count.                  */
  /*                                                                       */
  /* <Input>                                                               */
  /*    stream    :: The data stream.                                      */
  /*                                                                       */
  /*    delta_cnt :: The number of deltas to be read.                      */
  /*                                                                       */
  /* <Return>                                                              */
  /*    An array of FT_Short containing the deltas for the affected        */
  /*    points.  (This only gets the deltas for one dimension.  It will    */
  /*    generally be called twice, once for x, once for y.  When used in   */
  /*    cvt table, it will only be called once.)                           */
  /*                                                                       */
  static FT_Short*
  ft_var_readpackeddeltas( FT_Stream  stream,
                           FT_UInt    delta_cnt )
  {
    FT_Short  *deltas = NULL;
    FT_UInt    runcnt, cnt;
    FT_UInt    i, j;
    FT_Memory  memory = stream->memory;
    FT_Error   error  = FT_Err_Ok;

    FT_UNUSED( error );


    if ( FT_NEW_ARRAY( deltas, delta_cnt ) )
      return NULL;

    i = 0;
    while ( i < delta_cnt )
    {
      runcnt = FT_GET_BYTE();
      cnt    = runcnt & GX_DT_DELTA_RUN_COUNT_MASK;

      if ( runcnt & GX_DT_DELTAS_ARE_ZERO )
      {
        /* `runcnt' zeroes get added */
        for ( j = 0; j <= cnt && i < delta_cnt; j++ )
          deltas[i++] = 0;
      }
      else if ( runcnt & GX_DT_DELTAS_ARE_WORDS )
      {
        /* `runcnt' shorts from the stack */
        for ( j = 0; j <= cnt && i < delta_cnt; j++ )
          deltas[i++] = FT_GET_SHORT();
      }
      else
      {
        /* `runcnt' signed bytes from the stack */
        for ( j = 0; j <= cnt && i < delta_cnt; j++ )
          deltas[i++] = FT_GET_CHAR();
      }

      if ( j <= cnt )
      {
        /* bad format */
        FT_FREE( deltas );
        return NULL;
      }
    }

    return deltas;
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    ft_var_load_avar                                                   */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Parse the `avar' table if present.  It need not be, so we return   */
  /*    nothing.                                                           */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face :: The font face.                                             */
  /*                                                                       */
  static void
  ft_var_load_avar( TT_Face  face )
  {
    FT_Stream       stream = FT_FACE_STREAM( face );
    FT_Memory       memory = stream->memory;
    GX_Blend        blend  = face->blend;
    GX_AVarSegment  segment;
    FT_Error        error = FT_Err_Ok;
    FT_Long         version;
    FT_Long         axisCount;
    FT_Int          i, j;
    FT_ULong        table_len;

    FT_UNUSED( error );


    FT_TRACE2(( "AVAR " ));

    blend->avar_checked = TRUE;
    error = face->goto_table( face, TTAG_avar, stream, &table_len );
    if ( error )
    {
      FT_TRACE2(( "is missing\n" ));
      return;
    }

    if ( FT_FRAME_ENTER( table_len ) )
      return;

    version   = FT_GET_LONG();
    axisCount = FT_GET_LONG();

    if ( version != 0x00010000L )
    {
      FT_TRACE2(( "bad table version\n" ));
      goto Exit;
    }

    FT_TRACE2(( "loaded\n" ));

    if ( axisCount != (FT_Long)blend->mmvar->num_axis )
    {
      FT_TRACE2(( "ft_var_load_avar: number of axes in `avar' and `cvar'\n"
                  "                  table are different\n" ));
      goto Exit;
    }

    if ( FT_NEW_ARRAY( blend->avar_segment, axisCount ) )
      goto Exit;

    segment = &blend->avar_segment[0];
    for ( i = 0; i < axisCount; i++, segment++ )
    {
      FT_TRACE5(( "  axis %d:\n", i ));

      segment->pairCount = FT_GET_USHORT();
      if ( FT_NEW_ARRAY( segment->correspondence, segment->pairCount ) )
      {
        /* Failure.  Free everything we have done so far.  We must do */
        /* it right now since loading the `avar' table is optional.   */

        for ( j = i - 1; j >= 0; j-- )
          FT_FREE( blend->avar_segment[j].correspondence );

        FT_FREE( blend->avar_segment );
        blend->avar_segment = NULL;
        goto Exit;
      }

      for ( j = 0; j < segment->pairCount; j++ )
      {
        /* convert to Fixed */
        segment->correspondence[j].fromCoord = FT_GET_SHORT() << 2;
        segment->correspondence[j].toCoord   = FT_GET_SHORT() << 2;

        FT_TRACE5(( "    mapping %.4f to %.4f\n",
                    segment->correspondence[j].fromCoord / 65536.0,
                    segment->correspondence[j].toCoord / 65536.0 ));
      }

      FT_TRACE5(( "\n" ));
    }

  Exit:
    FT_FRAME_EXIT();
  }


  typedef struct  GX_GVar_Head_
  {
    FT_Long    version;
    FT_UShort  axisCount;
    FT_UShort  globalCoordCount;
    FT_ULong   offsetToCoord;
    FT_UShort  glyphCount;
    FT_UShort  flags;
    FT_ULong   offsetToData;

  } GX_GVar_Head;


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    ft_var_load_gvar                                                   */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Parse the `gvar' table if present.  If `fvar' is there, `gvar' had */
  /*    better be there too.                                               */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face :: The font face.                                             */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  static FT_Error
  ft_var_load_gvar( TT_Face  face )
  {
    FT_Stream     stream = FT_FACE_STREAM( face );
    FT_Memory     memory = stream->memory;
    GX_Blend      blend  = face->blend;
    FT_Error      error;
    FT_UInt       i, j;
    FT_ULong      table_len;
    FT_ULong      gvar_start;
    FT_ULong      offsetToData;
    GX_GVar_Head  gvar_head;

    static const FT_Frame_Field  gvar_fields[] =
    {

#undef  FT_STRUCTURE
#define FT_STRUCTURE  GX_GVar_Head

      FT_FRAME_START( 20 ),
        FT_FRAME_LONG  ( version ),
        FT_FRAME_USHORT( axisCount ),
        FT_FRAME_USHORT( globalCoordCount ),
        FT_FRAME_ULONG ( offsetToCoord ),
        FT_FRAME_USHORT( glyphCount ),
        FT_FRAME_USHORT( flags ),
        FT_FRAME_ULONG ( offsetToData ),
      FT_FRAME_END
    };


    FT_TRACE2(( "GVAR " ));

    if ( ( error = face->goto_table( face,
                                     TTAG_gvar,
                                     stream,
                                     &table_len ) ) != 0 )
    {
      FT_TRACE2(( "is missing\n" ));
      goto Exit;
    }

    gvar_start = FT_STREAM_POS( );
    if ( FT_STREAM_READ_FIELDS( gvar_fields, &gvar_head ) )
      goto Exit;

    blend->tuplecount  = gvar_head.globalCoordCount;
    blend->gv_glyphcnt = gvar_head.glyphCount;
    offsetToData       = gvar_start + gvar_head.offsetToData;

    if ( gvar_head.version != 0x00010000L )
    {
      FT_TRACE1(( "bad table version\n" ));
      error = FT_THROW( Invalid_Table );
      goto Exit;
    }

    FT_TRACE2(( "loaded\n" ));

    if ( gvar_head.axisCount != (FT_UShort)blend->mmvar->num_axis )
    {
      FT_TRACE1(( "ft_var_load_gvar: number of axes in `gvar' and `cvar'\n"
                  "                  table are different\n" ));
      error = FT_THROW( Invalid_Table );
      goto Exit;
    }

    FT_TRACE5(( "gvar: there are %d shared coordinates:\n",
                blend->tuplecount ));

    if ( FT_NEW_ARRAY( blend->glyphoffsets, blend->gv_glyphcnt + 1 ) )
      goto Exit;

    if ( gvar_head.flags & 1 )
    {
      /* long offsets (one more offset than glyphs, to mark size of last) */
      if ( FT_FRAME_ENTER( ( blend->gv_glyphcnt + 1 ) * 4L ) )
        goto Exit;

      for ( i = 0; i <= blend->gv_glyphcnt; i++ )
        blend->glyphoffsets[i] = offsetToData + FT_GET_ULONG();

      FT_FRAME_EXIT();
    }
    else
    {
      /* short offsets (one more offset than glyphs, to mark size of last) */
      if ( FT_FRAME_ENTER( ( blend->gv_glyphcnt + 1 ) * 2L ) )
        goto Exit;

      for ( i = 0; i <= blend->gv_glyphcnt; i++ )
        blend->glyphoffsets[i] = offsetToData + FT_GET_USHORT() * 2;
                                               /* XXX: Undocumented: `*2'! */

      FT_FRAME_EXIT();
    }

    if ( blend->tuplecount != 0 )
    {
      if ( FT_NEW_ARRAY( blend->tuplecoords,
                         gvar_head.axisCount * blend->tuplecount ) )
        goto Exit;

      if ( FT_STREAM_SEEK( gvar_start + gvar_head.offsetToCoord )         ||
           FT_FRAME_ENTER( blend->tuplecount * gvar_head.axisCount * 2L ) )
        goto Exit;

      for ( i = 0; i < blend->tuplecount; i++ )
      {
        FT_TRACE5(( "  [ " ));
        for ( j = 0 ; j < (FT_UInt)gvar_head.axisCount; j++ )
        {
          blend->tuplecoords[i * gvar_head.axisCount + j] =
            FT_GET_SHORT() << 2;                /* convert to FT_Fixed */
          FT_TRACE5(( "%.4f ",
            blend->tuplecoords[i * gvar_head.axisCount + j] / 65536.0 ));
        }
        FT_TRACE5(( "]\n" ));
      }

      FT_TRACE5(( "\n" ));

      FT_FRAME_EXIT();
    }

  Exit:
    return error;
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    ft_var_apply_tuple                                                 */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Figure out whether a given tuple (design) applies to the current   */
  /*    blend, and if so, what is the scaling factor.                      */
  /*                                                                       */
  /* <Input>                                                               */
  /*    blend           :: The current blend of the font.                  */
  /*                                                                       */
  /*    tupleIndex      :: A flag saying whether this is an intermediate   */
  /*                       tuple or not.                                   */
  /*                                                                       */
  /*    tuple_coords    :: The coordinates of the tuple in normalized axis */
  /*                       units.                                          */
  /*                                                                       */
  /*    im_start_coords :: The initial coordinates where this tuple starts */
  /*                       to apply (for intermediate coordinates).        */
  /*                                                                       */
  /*    im_end_coords   :: The final coordinates after which this tuple no */
  /*                       longer applies (for intermediate coordinates).  */
  /*                                                                       */
  /* <Return>                                                              */
  /*    An FT_Fixed value containing the scaling factor.                   */
  /*                                                                       */
  static FT_Fixed
  ft_var_apply_tuple( GX_Blend   blend,
                      FT_UShort  tupleIndex,
                      FT_Fixed*  tuple_coords,
                      FT_Fixed*  im_start_coords,
                      FT_Fixed*  im_end_coords )
  {
    FT_UInt   i;
    FT_Fixed  apply = 0x10000L;


    for ( i = 0; i < blend->num_axis; i++ )
    {
      FT_TRACE6(( "    axis coordinate %d (%.4f):\n",
                  i, blend->normalizedcoords[i] / 65536.0 ));

      /* It's not clear why (for intermediate tuples) we don't need     */
      /* to check against start/end -- the documentation says we don't. */
      /* Similarly, it's unclear why we don't need to scale along the   */
      /* axis.                                                          */

      if ( tuple_coords[i] == 0 )
      {
        FT_TRACE6(( "      tuple coordinate is zero, ignored\n", i ));
        continue;
      }

      else if ( blend->normalizedcoords[i] == 0 )
      {
        FT_TRACE6(( "      axis coordinate is zero, stop\n" ));
        apply = 0;
        break;
      }

      else if ( ( blend->normalizedcoords[i] < 0 && tuple_coords[i] > 0 ) ||
                ( blend->normalizedcoords[i] > 0 && tuple_coords[i] < 0 ) )
      {
        FT_TRACE6(( "      tuple coordinate value %.4f is exceeded, stop\n",
                    tuple_coords[i] / 65536.0 ));
        apply = 0;
        break;
      }

      else if ( !( tupleIndex & GX_TI_INTERMEDIATE_TUPLE ) )
      {
        FT_TRACE6(( "      tuple coordinate value %.4f fits\n",
                    tuple_coords[i] / 65536.0 ));
        /* not an intermediate tuple */
        apply = FT_MulFix( apply,
                           blend->normalizedcoords[i] > 0
                             ? blend->normalizedcoords[i]
                             : -blend->normalizedcoords[i] );
      }

      else if ( blend->normalizedcoords[i] < im_start_coords[i] ||
                blend->normalizedcoords[i] > im_end_coords[i]   )
      {
        FT_TRACE6(( "      intermediate tuple range [%.4f;%.4f] is exceeded,"
                    " stop\n",
                    im_start_coords[i] / 65536.0,
                    im_end_coords[i] / 65536.0 ));
        apply = 0;
        break;
      }

      else if ( blend->normalizedcoords[i] < tuple_coords[i] )
      {
        FT_TRACE6(( "      intermediate tuple range [%.4f;%.4f] fits\n",
                    im_start_coords[i] / 65536.0,
                    im_end_coords[i] / 65536.0 ));
        apply = FT_MulDiv( apply,
                           blend->normalizedcoords[i] - im_start_coords[i],
                           tuple_coords[i] - im_start_coords[i] );
      }

      else
      {
        FT_TRACE6(( "      intermediate tuple range [%.4f;%.4f] fits\n",
                    im_start_coords[i] / 65536.0,
                    im_end_coords[i] / 65536.0 ));
        apply = FT_MulDiv( apply,
                           im_end_coords[i] - blend->normalizedcoords[i],
                           im_end_coords[i] - tuple_coords[i] );
      }
    }

    FT_TRACE6(( "    apply factor is %.4f\n", apply / 65536.0 ));

    return apply;
  }


  /*************************************************************************/
  /*************************************************************************/
  /*****                                                               *****/
  /*****               MULTIPLE MASTERS SERVICE FUNCTIONS              *****/
  /*****                                                               *****/
  /*************************************************************************/
  /*************************************************************************/


  typedef struct  GX_FVar_Head_
  {
    FT_Long    version;
    FT_UShort  offsetToData;
    FT_UShort  countSizePairs;
    FT_UShort  axisCount;
    FT_UShort  axisSize;
    FT_UShort  instanceCount;
    FT_UShort  instanceSize;

  } GX_FVar_Head;


  typedef struct  fvar_axis_
  {
    FT_ULong   axisTag;
    FT_Fixed   minValue;
    FT_Fixed   defaultValue;
    FT_Fixed   maxValue;
    FT_UShort  flags;
    FT_UShort  nameID;

  } GX_FVar_Axis;


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    TT_Get_MM_Var                                                      */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Check that the font's `fvar' table is valid, parse it, and return  */
  /*    those data.                                                        */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face   :: The font face.                                           */
  /*              TT_Get_MM_Var initializes the blend structure.           */
  /*                                                                       */
  /* <Output>                                                              */
  /*    master :: The `fvar' data (must be freed by caller).               */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  FT_LOCAL_DEF( FT_Error )
  TT_Get_MM_Var( TT_Face      face,
                 FT_MM_Var*  *master )
  {
    FT_Stream            stream = face->root.stream;
    FT_Memory            memory = face->root.memory;
    FT_ULong             table_len;
    FT_Error             error  = FT_Err_Ok;
    FT_ULong             fvar_start;
    FT_Int               i, j;
    FT_MM_Var*           mmvar = NULL;
    FT_Fixed*            next_coords;
    FT_String*           next_name;
    FT_Var_Axis*         a;
    FT_Var_Named_Style*  ns;
    GX_FVar_Head         fvar_head;

    static const FT_Frame_Field  fvar_fields[] =
    {

#undef  FT_STRUCTURE
#define FT_STRUCTURE  GX_FVar_Head

      FT_FRAME_START( 16 ),
        FT_FRAME_LONG  ( version ),
        FT_FRAME_USHORT( offsetToData ),
        FT_FRAME_USHORT( countSizePairs ),
        FT_FRAME_USHORT( axisCount ),
        FT_FRAME_USHORT( axisSize ),
        FT_FRAME_USHORT( instanceCount ),
        FT_FRAME_USHORT( instanceSize ),
      FT_FRAME_END
    };

    static const FT_Frame_Field  fvaraxis_fields[] =
    {

#undef  FT_STRUCTURE
#define FT_STRUCTURE  GX_FVar_Axis

      FT_FRAME_START( 20 ),
        FT_FRAME_ULONG ( axisTag ),
        FT_FRAME_LONG  ( minValue ),
        FT_FRAME_LONG  ( defaultValue ),
        FT_FRAME_LONG  ( maxValue ),
        FT_FRAME_USHORT( flags ),
        FT_FRAME_USHORT( nameID ),
      FT_FRAME_END
    };


    /* read the font data and set up the internal representation */
    /* if not already done                                       */

    if ( face->blend == NULL )
    {
      FT_TRACE2(( "FVAR " ));

      /* both `fvar' and `gvar' must be present */
      if ( ( error = face->goto_table( face, TTAG_gvar,
                                       stream, &table_len ) ) != 0 )
      {
        FT_TRACE1(( "\n"
                    "TT_Get_MM_Var: `gvar' table is missing\n" ));
        goto Exit;
      }

      if ( ( error = face->goto_table( face, TTAG_fvar,
                                       stream, &table_len ) ) != 0 )
      {
        FT_TRACE1(( "is missing\n" ));
        goto Exit;
      }

      fvar_start = FT_STREAM_POS( );

      if ( FT_STREAM_READ_FIELDS( fvar_fields, &fvar_head ) )
        goto Exit;

      if ( fvar_head.version != (FT_Long)0x00010000L                      ||
#if 0
           /* fonts like `JamRegular.ttf' have an incorrect value for */
           /* `countSizePairs'; since value 2 is hard-coded in `fvar' */
           /* version 1.0, we simply ignore it                        */
           fvar_head.countSizePairs != 2                                  ||
#endif
           fvar_head.axisSize != 20                                       ||
           /* axisCount limit implied by 16-bit instanceSize */
           fvar_head.axisCount > 0x3FFE                                   ||
           fvar_head.instanceSize != 4 + 4 * fvar_head.axisCount          ||
           /* instanceCount limit implied by limited range of name IDs */
           fvar_head.instanceCount > 0x7EFF                               ||
           fvar_head.offsetToData + fvar_head.axisCount * 20U +
             fvar_head.instanceCount * fvar_head.instanceSize > table_len )
      {
        FT_TRACE1(( "\n"
                    "TT_Get_MM_Var: invalid `fvar' header\n" ));
        error = FT_THROW( Invalid_Table );
        goto Exit;
      }

      FT_TRACE2(( "loaded\n" ));

      FT_TRACE5(( "number of GX style axes: %d\n", fvar_head.axisCount ));

      if ( FT_NEW( face->blend ) )
        goto Exit;

      /* cannot overflow 32-bit arithmetic because of limits above */
      face->blend->mmvar_len =
        sizeof ( FT_MM_Var ) +
        fvar_head.axisCount * sizeof ( FT_Var_Axis ) +
        fvar_head.instanceCount * sizeof ( FT_Var_Named_Style ) +
        fvar_head.instanceCount * fvar_head.axisCount * sizeof ( FT_Fixed ) +
        5 * fvar_head.axisCount;

      if ( FT_ALLOC( mmvar, face->blend->mmvar_len ) )
        goto Exit;
      face->blend->mmvar = mmvar;

      /* set up pointers and offsets into the `mmvar' array; */
      /* the data gets filled in later on                    */

      mmvar->num_axis =
        fvar_head.axisCount;
      mmvar->num_designs =
        ~0U;                   /* meaningless in this context; each glyph */
                               /* may have a different number of designs  */
                               /* (or tuples, as called by Apple)         */
      mmvar->num_namedstyles =
        fvar_head.instanceCount;
      mmvar->axis =
        (FT_Var_Axis*)&( mmvar[1] );
      mmvar->namedstyle =
        (FT_Var_Named_Style*)&( mmvar->axis[fvar_head.axisCount] );

      next_coords =
        (FT_Fixed*)&( mmvar->namedstyle[fvar_head.instanceCount] );
      for ( i = 0; i < fvar_head.instanceCount; i++ )
      {
        mmvar->namedstyle[i].coords  = next_coords;
        next_coords                 += fvar_head.axisCount;
      }

      next_name = (FT_String*)next_coords;
      for ( i = 0; i < fvar_head.axisCount; i++ )
      {
        mmvar->axis[i].name  = next_name;
        next_name           += 5;
      }

      /* now fill in the data */

      if ( FT_STREAM_SEEK( fvar_start + fvar_head.offsetToData ) )
        goto Exit;

      a = mmvar->axis;
      for ( i = 0; i < fvar_head.axisCount; i++ )
      {
        GX_FVar_Axis  axis_rec;


        if ( FT_STREAM_READ_FIELDS( fvaraxis_fields, &axis_rec ) )
          goto Exit;
        a->tag     = axis_rec.axisTag;
        a->minimum = axis_rec.minValue;
        a->def     = axis_rec.defaultValue;
        a->maximum = axis_rec.maxValue;
        a->strid   = axis_rec.nameID;

        a->name[0] = (FT_String)(   a->tag >> 24 );
        a->name[1] = (FT_String)( ( a->tag >> 16 ) & 0xFF );
        a->name[2] = (FT_String)( ( a->tag >>  8 ) & 0xFF );
        a->name[3] = (FT_String)( ( a->tag       ) & 0xFF );
        a->name[4] = '\0';

        FT_TRACE5(( "  \"%s\": minimum=%.4f, default=%.4f, maximum=%.4f\n",
                    a->name,
                    a->minimum / 65536.0,
                    a->def / 65536.0,
                    a->maximum / 65536.0 ));

        a++;
      }

      FT_TRACE5(( "\n" ));

      ns = mmvar->namedstyle;
      for ( i = 0; i < fvar_head.instanceCount; i++, ns++ )
      {
        if ( FT_FRAME_ENTER( 4L + 4L * fvar_head.axisCount ) )
          goto Exit;

        ns->strid       =    FT_GET_USHORT();
        (void) /* flags = */ FT_GET_USHORT();

        for ( j = 0; j < fvar_head.axisCount; j++ )
          ns->coords[j] = FT_GET_LONG();

        FT_FRAME_EXIT();
      }
    }

    /* fill the output array if requested */

    if ( master != NULL )
    {
      FT_UInt  n;


      if ( FT_ALLOC( mmvar, face->blend->mmvar_len ) )
        goto Exit;
      FT_MEM_COPY( mmvar, face->blend->mmvar, face->blend->mmvar_len );

      mmvar->axis =
        (FT_Var_Axis*)&( mmvar[1] );
      mmvar->namedstyle =
        (FT_Var_Named_Style*)&( mmvar->axis[mmvar->num_axis] );
      next_coords =
        (FT_Fixed*)&( mmvar->namedstyle[mmvar->num_namedstyles] );

      for ( n = 0; n < mmvar->num_namedstyles; n++ )
      {
        mmvar->namedstyle[n].coords  = next_coords;
        next_coords                 += mmvar->num_axis;
      }

      a         = mmvar->axis;
      next_name = (FT_String*)next_coords;
      for ( n = 0; n < mmvar->num_axis; n++ )
      {
        a->name = next_name;

        /* standard PostScript names for some standard apple tags */
        if ( a->tag == TTAG_wght )
          a->name = (char*)"Weight";
        else if ( a->tag == TTAG_wdth )
          a->name = (char*)"Width";
        else if ( a->tag == TTAG_opsz )
          a->name = (char*)"OpticalSize";
        else if ( a->tag == TTAG_slnt )
          a->name = (char*)"Slant";

        next_name += 5;
        a++;
      }

      *master = mmvar;
    }

  Exit:
    return error;
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    TT_Set_MM_Blend                                                    */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Set the blend (normalized) coordinates for this instance of the    */
  /*    font.  Check that the `gvar' table is reasonable and does some     */
  /*    initial preparation.                                               */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face       :: The font.                                            */
  /*                  Initialize the blend structure with `gvar' data.     */
  /*                                                                       */
  /* <Input>                                                               */
  /*    num_coords :: The number of available coordinates.  If it is       */
  /*                  larger than the number of axes, ignore the excess    */
  /*                  values.  If it is smaller than the number of axes,   */
  /*                  use the default value (0) for the remaining axes.    */
  /*                                                                       */
  /*    coords     :: An array of `num_coords', each between [-1,1].       */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  FT_LOCAL_DEF( FT_Error )
  TT_Set_MM_Blend( TT_Face    face,
                   FT_UInt    num_coords,
                   FT_Fixed*  coords )
  {
    FT_Error    error = FT_Err_Ok;
    GX_Blend    blend;
    FT_MM_Var*  mmvar;
    FT_UInt     i;
    FT_Memory   memory = face->root.memory;

    enum
    {
      mcvt_retain,
      mcvt_modify,
      mcvt_load

    } manageCvt;


    face->doblend = FALSE;

    if ( face->blend == NULL )
    {
      if ( ( error = TT_Get_MM_Var( face, NULL ) ) != 0 )
        goto Exit;
    }

    blend = face->blend;
    mmvar = blend->mmvar;

    if ( num_coords > mmvar->num_axis )
    {
      FT_TRACE2(( "TT_Set_MM_Blend: only using first %d of %d coordinates\n",
                  mmvar->num_axis, num_coords ));
      num_coords = mmvar->num_axis;
    }

    FT_TRACE5(( "normalized design coordinates:\n" ));

    for ( i = 0; i < num_coords; i++ )
    {
      FT_TRACE5(( "  %.4f\n", coords[i] / 65536.0 ));
      if ( coords[i] < -0x00010000L || coords[i] > 0x00010000L )
      {
        FT_TRACE1(( "TT_Set_MM_Blend: normalized design coordinate %.4f\n"
                    "                 is out of range [-1;1]\n",
                    coords[i] / 65536.0 ));
        error = FT_THROW( Invalid_Argument );
        goto Exit;
      }
    }

    FT_TRACE5(( "\n" ));

    if ( blend->glyphoffsets == NULL )
      if ( ( error = ft_var_load_gvar( face ) ) != 0 )
        goto Exit;

    if ( blend->normalizedcoords == NULL )
    {
      if ( FT_NEW_ARRAY( blend->normalizedcoords, mmvar->num_axis ) )
        goto Exit;

      manageCvt = mcvt_modify;

      /* If we have not set the blend coordinates before this, then the  */
      /* cvt table will still be what we read from the `cvt ' table and  */
      /* we don't need to reload it.  We may need to change it though... */
    }
    else
    {
      manageCvt = mcvt_retain;

      for ( i = 0; i < num_coords; i++ )
      {
        if ( blend->normalizedcoords[i] != coords[i] )
        {
          manageCvt = mcvt_load;
          break;
        }
      }

      for ( ; i < mmvar->num_axis; i++ )
      {
        if ( blend->normalizedcoords[i] != 0 )
        {
          manageCvt = mcvt_load;
          break;
        }
      }

      /* If we don't change the blend coords then we don't need to do  */
      /* anything to the cvt table.  It will be correct.  Otherwise we */
      /* no longer have the original cvt (it was modified when we set  */
      /* the blend last time), so we must reload and then modify it.   */
    }

    blend->num_axis = mmvar->num_axis;
    FT_MEM_COPY( blend->normalizedcoords,
                 coords,
                 num_coords * sizeof ( FT_Fixed ) );

    face->doblend = TRUE;

    if ( face->cvt != NULL )
    {
      switch ( manageCvt )
      {
      case mcvt_load:
        /* The cvt table has been loaded already; every time we change the */
        /* blend we may need to reload and remodify the cvt table.         */
        FT_FREE( face->cvt );
        face->cvt = NULL;

        error = tt_face_load_cvt( face, face->root.stream );
        break;

      case mcvt_modify:
        /* The original cvt table is in memory.  All we need to do is */
        /* apply the `cvar' table (if any).                           */
        error = tt_face_vary_cvt( face, face->root.stream );
        break;

      case mcvt_retain:
        /* The cvt table is correct for this set of coordinates. */
        break;
      }
    }

  Exit:
    return error;
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    TT_Set_Var_Design                                                  */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Set the coordinates for the instance, measured in the user         */
  /*    coordinate system.  Parse the `avar' table (if present) to convert */
  /*    from user to normalized coordinates.                               */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face       :: The font face.                                       */
  /*                  Initialize the blend struct with `gvar' data.        */
  /*                                                                       */
  /* <Input>                                                               */
  /*    num_coords :: The number of available coordinates.  If it is       */
  /*                  larger than the number of axes, ignore the excess    */
  /*                  values.  If it is smaller than the number of axes,   */
  /*                  use the default values for the remaining axes.       */
  /*                                                                       */
  /*    coords     :: A coordinate array with `num_coords' elements.       */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  FT_LOCAL_DEF( FT_Error )
  TT_Set_Var_Design( TT_Face    face,
                     FT_UInt    num_coords,
                     FT_Fixed*  coords )
  {
    FT_Error        error      = FT_Err_Ok;
    FT_Fixed*       normalized = NULL;
    GX_Blend        blend;
    FT_MM_Var*      mmvar;
    FT_UInt         i, j;
    FT_Var_Axis*    a;
    GX_AVarSegment  av;
    FT_Memory       memory = face->root.memory;


    if ( face->blend == NULL )
    {
      if ( ( error = TT_Get_MM_Var( face, NULL ) ) != 0 )
        goto Exit;
    }

    blend = face->blend;
    mmvar = blend->mmvar;

    if ( num_coords > mmvar->num_axis )
    {
      FT_TRACE2(( "TT_Set_Var_Design:"
                  " only using first %d of %d coordinates\n",
                  mmvar->num_axis, num_coords ));
      num_coords = mmvar->num_axis;
    }

    /* Axis normalization is a two stage process.  First we normalize */
    /* based on the [min,def,max] values for the axis to be [-1,0,1]. */
    /* Then, if there's an `avar' table, we renormalize this range.   */

    if ( FT_NEW_ARRAY( normalized, mmvar->num_axis ) )
      goto Exit;

    FT_TRACE5(( "design coordinates:\n" ));

    a = mmvar->axis;
    for ( i = 0; i < num_coords; i++, a++ )
    {
      FT_TRACE5(( "  %.4f\n", coords[i] / 65536.0 ));
      if ( coords[i] > a->maximum || coords[i] < a->minimum )
      {
        FT_TRACE1(( "TT_Set_Var_Design: normalized design coordinate %.4f\n"
                    "                   is out of range [%.4f;%.4f]\n",
                    coords[i] / 65536.0,
                    a->minimum / 65536.0,
                    a->maximum / 65536.0 ));
        error = FT_THROW( Invalid_Argument );
        goto Exit;
      }

      if ( coords[i] < a->def )
        normalized[i] = -FT_DivFix( coords[i] - a->def,
                                    a->minimum - a->def );
      else if ( a->maximum == a->def )
        normalized[i] = 0;
      else
        normalized[i] = FT_DivFix( coords[i] - a->def,
                                   a->maximum - a->def );
    }

    FT_TRACE5(( "\n" ));

    for ( ; i < mmvar->num_axis; i++ )
      normalized[i] = 0;

    if ( !blend->avar_checked )
      ft_var_load_avar( face );

    if ( blend->avar_segment != NULL )
    {
      FT_TRACE5(( "normalized design coordinates"
                  " before applying `avar' data:\n" ));

      av = blend->avar_segment;
      for ( i = 0; i < mmvar->num_axis; i++, av++ )
      {
        for ( j = 1; j < (FT_UInt)av->pairCount; j++ )
        {
          FT_TRACE5(( "  %.4f\n", normalized[i] / 65536.0 ));
          if ( normalized[i] < av->correspondence[j].fromCoord )
          {
            normalized[i] =
              FT_MulDiv( normalized[i] - av->correspondence[j - 1].fromCoord,
                         av->correspondence[j].toCoord -
                           av->correspondence[j - 1].toCoord,
                         av->correspondence[j].fromCoord -
                           av->correspondence[j - 1].fromCoord ) +
              av->correspondence[j - 1].toCoord;
            break;
          }
        }
      }
    }

    error = TT_Set_MM_Blend( face, mmvar->num_axis, normalized );

  Exit:
    FT_FREE( normalized );
    return error;
  }


  /*************************************************************************/
  /*************************************************************************/
  /*****                                                               *****/
  /*****                     GX VAR PARSING ROUTINES                   *****/
  /*****                                                               *****/
  /*************************************************************************/
  /*************************************************************************/


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    tt_face_vary_cvt                                                   */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Modify the loaded cvt table according to the `cvar' table and the  */
  /*    font's blend.                                                      */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    face   :: A handle to the target face object.                      */
  /*                                                                       */
  /* <Input>                                                               */
  /*    stream :: A handle to the input stream.                            */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  /*    Most errors are ignored.  It is perfectly valid not to have a      */
  /*    `cvar' table even if there is a `gvar' and `fvar' table.           */
  /*                                                                       */
  FT_LOCAL_DEF( FT_Error )
  tt_face_vary_cvt( TT_Face    face,
                    FT_Stream  stream )
  {
    FT_Error    error;
    FT_Memory   memory = stream->memory;
    FT_ULong    table_start;
    FT_ULong    table_len;
    FT_UInt     tupleCount;
    FT_ULong    offsetToData;
    FT_ULong    here;
    FT_UInt     i, j;
    FT_Fixed*   tuple_coords    = NULL;
    FT_Fixed*   im_start_coords = NULL;
    FT_Fixed*   im_end_coords   = NULL;
    GX_Blend    blend           = face->blend;
    FT_UInt     point_count;
    FT_UShort*  localpoints;
    FT_Short*   deltas;


    FT_TRACE2(( "CVAR " ));

    if ( blend == NULL )
    {
      FT_TRACE2(( "\n"
                  "tt_face_vary_cvt: no blend specified\n" ));
      error = FT_Err_Ok;
      goto Exit;
    }

    if ( face->cvt == NULL )
    {
      FT_TRACE2(( "\n"
                  "tt_face_vary_cvt: no `cvt ' table\n" ));
      error = FT_Err_Ok;
      goto Exit;
    }

    error = face->goto_table( face, TTAG_cvar, stream, &table_len );
    if ( error )
    {
      FT_TRACE2(( "is missing\n" ));

      error = FT_Err_Ok;
      goto Exit;
    }

    if ( FT_FRAME_ENTER( table_len ) )
    {
      error = FT_Err_Ok;
      goto Exit;
    }

    table_start = FT_Stream_FTell( stream );
    if ( FT_GET_LONG() != 0x00010000L )
    {
      FT_TRACE2(( "bad table version\n" ));

      error = FT_Err_Ok;
      goto FExit;
    }

    FT_TRACE2(( "loaded\n" ));

    if ( FT_NEW_ARRAY( tuple_coords, blend->num_axis )    ||
         FT_NEW_ARRAY( im_start_coords, blend->num_axis ) ||
         FT_NEW_ARRAY( im_end_coords, blend->num_axis )   )
      goto FExit;

    tupleCount   = FT_GET_USHORT();
    offsetToData = table_start + FT_GET_USHORT();

    /* The documentation implies there are flags packed into the        */
    /* tuplecount, but John Jenkins says that shared points don't apply */
    /* to `cvar', and no other flags are defined.                       */

    FT_TRACE5(( "cvar: there are %d tuples:\n", tupleCount ));

    for ( i = 0; i < ( tupleCount & 0xFFF ); i++ )
    {
      FT_UInt   tupleDataSize;
      FT_UInt   tupleIndex;
      FT_Fixed  apply;


      FT_TRACE6(( "  tuple %d:\n", i ));

      tupleDataSize = FT_GET_USHORT();
      tupleIndex    = FT_GET_USHORT();

      /* There is no provision here for a global tuple coordinate section, */
      /* so John says.  There are no tuple indices, just embedded tuples.  */

      if ( tupleIndex & GX_TI_EMBEDDED_TUPLE_COORD )
      {
        for ( j = 0; j < blend->num_axis; j++ )
          tuple_coords[j] = FT_GET_SHORT() << 2; /* convert from        */
                                                 /* short frac to fixed */
      }
      else
      {
        /* skip this tuple; it makes no sense */

        if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
          for ( j = 0; j < 2 * blend->num_axis; j++ )
            (void)FT_GET_SHORT();

        offsetToData += tupleDataSize;
        continue;
      }

      if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
      {
        for ( j = 0; j < blend->num_axis; j++ )
          im_start_coords[j] = FT_GET_SHORT() << 2;
        for ( j = 0; j < blend->num_axis; j++ )
          im_end_coords[j] = FT_GET_SHORT() << 2;
      }

      apply = ft_var_apply_tuple( blend,
                                  (FT_UShort)tupleIndex,
                                  tuple_coords,
                                  im_start_coords,
                                  im_end_coords );
      if ( /* tuple isn't active for our blend */
           apply == 0                                    ||
           /* global points not allowed,           */
           /* if they aren't local, makes no sense */
           !( tupleIndex & GX_TI_PRIVATE_POINT_NUMBERS ) )
      {
        offsetToData += tupleDataSize;
        continue;
      }

      here = FT_Stream_FTell( stream );

      FT_Stream_SeekSet( stream, offsetToData );

      localpoints = ft_var_readpackedpoints( stream, &point_count );
      deltas      = ft_var_readpackeddeltas( stream,
                                             point_count == 0 ? face->cvt_size
                                                              : point_count );
      if ( localpoints == NULL || deltas == NULL )
        ; /* failure, ignore it */

      else if ( localpoints == ALL_POINTS )
      {
#ifdef FT_DEBUG_LEVEL_TRACE
        int  count = 0;
#endif


        FT_TRACE7(( "    CVT deltas:\n" ));

        /* this means that there are deltas for every entry in cvt */
        for ( j = 0; j < face->cvt_size; j++ )
        {
          FT_Long  orig_cvt = face->cvt[j];


          face->cvt[j] = (FT_Short)( orig_cvt +
                                     FT_MulFix( deltas[j], apply ) );

#ifdef FT_DEBUG_LEVEL_TRACE
          if ( orig_cvt != face->cvt[j] )
          {
            FT_TRACE7(( "      %d: %d -> %d\n",
                        j, orig_cvt, face->cvt[j] ));
            count++;
          }
#endif
        }

#ifdef FT_DEBUG_LEVEL_TRACE
        if ( !count )
          FT_TRACE7(( "      none\n" ));
#endif
      }

      else
      {
#ifdef FT_DEBUG_LEVEL_TRACE
        int  count = 0;
#endif


        FT_TRACE7(( "    CVT deltas:\n" ));

        for ( j = 0; j < point_count; j++ )
        {
          int      pindex   = localpoints[j];
          FT_Long  orig_cvt = face->cvt[pindex];


          face->cvt[pindex] = (FT_Short)( orig_cvt +
                                          FT_MulFix( deltas[j], apply ) );

#ifdef FT_DEBUG_LEVEL_TRACE
          if ( orig_cvt != face->cvt[pindex] )
          {
            FT_TRACE7(( "      %d: %d -> %d\n",
                        pindex, orig_cvt, face->cvt[pindex] ));
            count++;
          }
#endif
        }

#ifdef FT_DEBUG_LEVEL_TRACE
        if ( !count )
          FT_TRACE7(( "      none\n" ));
#endif
      }

      if ( localpoints != ALL_POINTS )
        FT_FREE( localpoints );
      FT_FREE( deltas );

      offsetToData += tupleDataSize;

      FT_Stream_SeekSet( stream, here );
    }

    FT_TRACE5(( "\n" ));

  FExit:
    FT_FRAME_EXIT();

  Exit:
    FT_FREE( tuple_coords );
    FT_FREE( im_start_coords );
    FT_FREE( im_end_coords );

    return error;
  }


  /* Shift the original coordinates of all points between indices `p1' */
  /* and `p2', using the same difference as given by index `ref'.      */

  /* modeled after `af_iup_shift' */

  static void
  tt_delta_shift( int         p1,
                  int         p2,
                  int         ref,
                  FT_Vector*  in_points,
                  FT_Vector*  out_points )
  {
    int        p;
    FT_Vector  delta;


    delta.x = out_points[ref].x - in_points[ref].x;
    delta.y = out_points[ref].y - in_points[ref].y;

    if ( delta.x == 0 && delta.y == 0 )
      return;

    for ( p = p1; p < ref; p++ )
    {
      out_points[p].x += delta.x;
      out_points[p].y += delta.y;
    }

    for ( p = ref + 1; p <= p2; p++ )
    {
      out_points[p].x += delta.x;
      out_points[p].y += delta.y;
    }
  }


  /* Interpolate the original coordinates of all points with indices */
  /* between `p1' and `p2', using `ref1' and `ref2' as the reference */
  /* point indices.                                                  */

  /* modeled after `af_iup_interp', `_iup_worker_interpolate', and */
  /* `Ins_IUP'                                                     */

  static void
  tt_delta_interpolate( int         p1,
                        int         p2,
                        int         ref1,
                        int         ref2,
                        FT_Vector*  in_points,
                        FT_Vector*  out_points )
  {
    int  p, i;

    FT_Pos  out, in1, in2, out1, out2, d1, d2;


    if ( p1 > p2 )
      return;

    /* handle both horizontal and vertical coordinates */
    for ( i = 0; i <= 1; i++ )
    {
      /* shift array pointers so that we can access `foo.y' as `foo.x' */
      in_points  = (FT_Vector*)( (FT_Pos*)in_points + i );
      out_points = (FT_Vector*)( (FT_Pos*)out_points + i );

      if ( in_points[ref1].x > in_points[ref2].x )
      {
        p    = ref1;
        ref1 = ref2;
        ref2 = p;
      }

      in1  = in_points[ref1].x;
      in2  = in_points[ref2].x;
      out1 = out_points[ref1].x;
      out2 = out_points[ref2].x;
      d1   = out1 - in1;
      d2   = out2 - in2;

      if ( out1 == out2 || in1 == in2 )
      {
        for ( p = p1; p <= p2; p++ )
        {
          out = in_points[p].x;

          if ( out <= in1 )
            out += d1;
          else if ( out >= in2 )
            out += d2;
          else
            out = out1;

          out_points[p].x = out;
        }
      }
      else
      {
        FT_Fixed  scale = FT_DivFix( out2 - out1, in2 - in1 );


        for ( p = p1; p <= p2; p++ )
        {
          out = in_points[p].x;

          if ( out <= in1 )
            out += d1;
          else if ( out >= in2 )
            out += d2;
          else
            out = out1 + FT_MulFix( out - in1, scale );

          out_points[p].x = out;
        }
      }
    }
  }


  /* Interpolate points without delta values, similar to */
  /* the `IUP' hinting instruction.                      */

  /* modeled after `Ins_IUP */

  static void
  tt_handle_deltas( FT_Outline*  outline,
                    FT_Vector*   in_points,
                    FT_Bool*     has_delta )
  {
    FT_Vector*  out_points;

    FT_UInt  first_point;
    FT_UInt  end_point;

    FT_UInt  first_delta;
    FT_UInt  cur_delta;

    FT_UInt   point;
    FT_Short  contour;


    /* ignore empty outlines */
    if ( !outline->n_contours )
      return;

    out_points = outline->points;

    contour = 0;
    point   = 0;

    do
    {
      end_point   = outline->contours[contour];
      first_point = point;

      /* search first point that has a delta */
      while ( point <= end_point && !has_delta[point] )
        point++;

      if ( point <= end_point )
      {
        first_delta = point;
        cur_delta   = point;

        point++;

        while ( point <= end_point )
        {
          /* search next point that has a delta  */
          /* and interpolate intermediate points */
          if ( has_delta[point] )
          {
            tt_delta_interpolate( cur_delta + 1,
                                  point - 1,
                                  cur_delta,
                                  point,
                                  in_points,
                                  out_points );
            cur_delta = point;
          }

          point++;
        }

        /* shift contour if we only have a single delta */
        if ( cur_delta == first_delta )
          tt_delta_shift( first_point,
                          end_point,
                          cur_delta,
                          in_points,
                          out_points );
        else
        {
          /* otherwise handle remaining points       */
          /* at the end and beginning of the contour */
          tt_delta_interpolate( cur_delta + 1,
                                end_point,
                                cur_delta,
                                first_delta,
                                in_points,
                                out_points );

          if ( first_delta > 0 )
            tt_delta_interpolate( first_point,
                                  first_delta - 1,
                                  cur_delta,
                                  first_delta,
                                  in_points,
                                  out_points );
        }
      }
      contour++;

    } while ( contour < outline->n_contours );
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    TT_Vary_Apply_Glyph_Deltas                                         */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Apply the appropriate deltas to the current glyph.                 */
  /*                                                                       */
  /* <Input>                                                               */
  /*    face        :: A handle to the target face object.                 */
  /*                                                                       */
  /*    glyph_index :: The index of the glyph being modified.              */
  /*                                                                       */
  /*    n_points    :: The number of the points in the glyph, including    */
  /*                   phantom points.                                     */
  /*                                                                       */
  /* <InOut>                                                               */
  /*    outline     :: The outline to change.                              */
  /*                                                                       */
  /* <Return>                                                              */
  /*    FreeType error code.  0 means success.                             */
  /*                                                                       */
  FT_LOCAL_DEF( FT_Error )
  TT_Vary_Apply_Glyph_Deltas( TT_Face      face,
                              FT_UInt      glyph_index,
                              FT_Outline*  outline,
                              FT_UInt      n_points )
  {
    FT_Stream   stream = face->root.stream;
    FT_Memory   memory = stream->memory;
    GX_Blend    blend  = face->blend;

    FT_Vector*  points_org = NULL;
    FT_Bool*    has_delta  = NULL;

    FT_Error    error;
    FT_ULong    glyph_start;
    FT_UInt     tupleCount;
    FT_ULong    offsetToData;
    FT_ULong    here;
    FT_UInt     i, j;
    FT_Fixed*   tuple_coords    = NULL;
    FT_Fixed*   im_start_coords = NULL;
    FT_Fixed*   im_end_coords   = NULL;
    FT_UInt     point_count, spoint_count = 0;
    FT_UShort*  sharedpoints = NULL;
    FT_UShort*  localpoints  = NULL;
    FT_UShort*  points;
    FT_Short    *deltas_x, *deltas_y;


    if ( !face->doblend || blend == NULL )
      return FT_THROW( Invalid_Argument );

    if ( glyph_index >= blend->gv_glyphcnt      ||
         blend->glyphoffsets[glyph_index] ==
           blend->glyphoffsets[glyph_index + 1] )
    {
      FT_TRACE2(( "TT_Vary_Apply_Glyph_Deltas:"
                  " no variation data for this glyph\n" ));
      return FT_Err_Ok;
    }

    if ( FT_NEW_ARRAY( points_org, n_points ) ||
         FT_NEW_ARRAY( has_delta, n_points )  )
      goto Fail1;

    if ( FT_STREAM_SEEK( blend->glyphoffsets[glyph_index] )   ||
         FT_FRAME_ENTER( blend->glyphoffsets[glyph_index + 1] -
                           blend->glyphoffsets[glyph_index] ) )
      goto Fail1;

    glyph_start = FT_Stream_FTell( stream );

    /* each set of glyph variation data is formatted similarly to `cvar' */
    /* (except we get shared points and global tuples)                   */

    if ( FT_NEW_ARRAY( tuple_coords, blend->num_axis )    ||
         FT_NEW_ARRAY( im_start_coords, blend->num_axis ) ||
         FT_NEW_ARRAY( im_end_coords, blend->num_axis )   )
      goto Fail2;

    tupleCount   = FT_GET_USHORT();
    offsetToData = glyph_start + FT_GET_USHORT();

    if ( tupleCount & GX_TC_TUPLES_SHARE_POINT_NUMBERS )
    {
      here = FT_Stream_FTell( stream );

      FT_Stream_SeekSet( stream, offsetToData );

      sharedpoints = ft_var_readpackedpoints( stream, &spoint_count );
      offsetToData = FT_Stream_FTell( stream );

      FT_Stream_SeekSet( stream, here );
    }

    FT_TRACE5(( "gvar: there are %d tuples:\n", tupleCount ));

    for ( i = 0; i < ( tupleCount & GX_TC_TUPLE_COUNT_MASK ); i++ )
    {
      FT_UInt   tupleDataSize;
      FT_UInt   tupleIndex;
      FT_Fixed  apply;


      FT_TRACE6(( "  tuple %d:\n", i ));

      tupleDataSize = FT_GET_USHORT();
      tupleIndex    = FT_GET_USHORT();

      if ( tupleIndex & GX_TI_EMBEDDED_TUPLE_COORD )
      {
        for ( j = 0; j < blend->num_axis; j++ )
          tuple_coords[j] = FT_GET_SHORT() << 2;  /* convert from        */
                                                  /* short frac to fixed */
      }
      else if ( ( tupleIndex & GX_TI_TUPLE_INDEX_MASK ) >= blend->tuplecount )
      {
        error = FT_THROW( Invalid_Table );
        goto Fail2;
      }
      else
        FT_MEM_COPY(
          tuple_coords,
          &blend->tuplecoords[( tupleIndex & 0xFFF ) * blend->num_axis],
          blend->num_axis * sizeof ( FT_Fixed ) );

      if ( tupleIndex & GX_TI_INTERMEDIATE_TUPLE )
      {
        for ( j = 0; j < blend->num_axis; j++ )
          im_start_coords[j] = FT_GET_SHORT() << 2;
        for ( j = 0; j < blend->num_axis; j++ )
          im_end_coords[j] = FT_GET_SHORT() << 2;
      }

      apply = ft_var_apply_tuple( blend,
                                  (FT_UShort)tupleIndex,
                                  tuple_coords,
                                  im_start_coords,
                                  im_end_coords );

      if ( apply == 0 )              /* tuple isn't active for our blend */
      {
        offsetToData += tupleDataSize;
        continue;
      }

      here = FT_Stream_FTell( stream );

      if ( tupleIndex & GX_TI_PRIVATE_POINT_NUMBERS )
      {
        FT_Stream_SeekSet( stream, offsetToData );

        localpoints = ft_var_readpackedpoints( stream, &point_count );
        points      = localpoints;
      }
      else
      {
        points      = sharedpoints;
        point_count = spoint_count;
      }

      deltas_x = ft_var_readpackeddeltas( stream,
                                          point_count == 0 ? n_points
                                                           : point_count );
      deltas_y = ft_var_readpackeddeltas( stream,
                                          point_count == 0 ? n_points
                                                           : point_count );

      if ( points == NULL || deltas_y == NULL || deltas_x == NULL )
        ; /* failure, ignore it */

      else if ( points == ALL_POINTS )
      {
#ifdef FT_DEBUG_LEVEL_TRACE
        int  count = 0;
#endif


        FT_TRACE7(( "    point deltas:\n" ));

        /* this means that there are deltas for every point in the glyph */
        for ( j = 0; j < n_points; j++ )
        {
#ifdef FT_DEBUG_LEVEL_TRACE
          FT_Vector  point_org = outline->points[j];
#endif


          outline->points[j].x += FT_MulFix( deltas_x[j], apply );
          outline->points[j].y += FT_MulFix( deltas_y[j], apply );

#ifdef FT_DEBUG_LEVEL_TRACE
          if ( ( point_org.x != outline->points[j].x ) ||
               ( point_org.y != outline->points[j].y ) )
          {
            FT_TRACE7(( "      %d: (%d, %d) -> (%d, %d)\n",
                        j,
                        point_org.x,
                        point_org.y,
                        outline->points[j].x,
                        outline->points[j].y ));
            count++;
          }
#endif
        }

#ifdef FT_DEBUG_LEVEL_TRACE
        if ( !count )
          FT_TRACE7(( "      none\n" ));
#endif
      }

      else
      {
#ifdef FT_DEBUG_LEVEL_TRACE
        int  count = 0;
#endif


        /* we have to interpolate the missing deltas similar to the */
        /* IUP bytecode instruction                                 */
        for ( j = 0; j < n_points; j++ )
        {
          points_org[j] = outline->points[j];
          has_delta[j]  = FALSE;
        }

        for ( j = 0; j < point_count; j++ )
        {
          FT_UShort  idx = localpoints[j];


          if ( idx >= n_points )
            continue;

          has_delta[idx] = TRUE;

          outline->points[idx].x += FT_MulFix( deltas_x[j], apply );
          outline->points[idx].y += FT_MulFix( deltas_y[j], apply );
        }

        /* no need to handle phantom points here,      */
        /* since solitary points can't be interpolated */
        tt_handle_deltas( outline,
                          points_org,
                          has_delta );

#ifdef FT_DEBUG_LEVEL_TRACE
        FT_TRACE7(( "    point deltas:\n" ));

        for ( j = 0; j < n_points; j++)
        {
          if ( ( points_org[j].x != outline->points[j].x ) ||
               ( points_org[j].y != outline->points[j].y ) )
          {
            FT_TRACE7(( "      %d: (%d, %d) -> (%d, %d)\n",
                        j,
                        points_org[j].x,
                        points_org[j].y,
                        outline->points[j].x,
                        outline->points[j].y ));
            count++;
          }
        }

        if ( !count )
          FT_TRACE7(( "      none\n" ));
#endif
      }

      if ( localpoints != ALL_POINTS )
        FT_FREE( localpoints );
      FT_FREE( deltas_x );
      FT_FREE( deltas_y );

      offsetToData += tupleDataSize;

      FT_Stream_SeekSet( stream, here );
    }

    FT_TRACE5(( "\n" ));

  Fail2:
    FT_FREE( tuple_coords );
    FT_FREE( im_start_coords );
    FT_FREE( im_end_coords );

    FT_FRAME_EXIT();

  Fail1:
    FT_FREE( points_org );
    FT_FREE( has_delta );

    return error;
  }


  /*************************************************************************/
  /*                                                                       */
  /* <Function>                                                            */
  /*    tt_done_blend                                                      */
  /*                                                                       */
  /* <Description>                                                         */
  /*    Free the blend internal data structure.                            */
  /*                                                                       */
  FT_LOCAL_DEF( void )
  tt_done_blend( FT_Memory  memory,
                 GX_Blend   blend )
  {
    if ( blend != NULL )
    {
      FT_UInt  i;


      FT_FREE( blend->normalizedcoords );
      FT_FREE( blend->mmvar );

      if ( blend->avar_segment != NULL )
      {
        for ( i = 0; i < blend->num_axis; i++ )
          FT_FREE( blend->avar_segment[i].correspondence );
        FT_FREE( blend->avar_segment );
      }

      FT_FREE( blend->tuplecoords );
      FT_FREE( blend->glyphoffsets );
      FT_FREE( blend );
    }
  }

#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */


/* END */