# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = python/tests
DIST_COMMON = $(dist_example_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(exampledir)"
DATA = $(dist_example_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASE_THREAD_LIBS = @BASE_THREAD_LIBS@
C14N_OBJ = @C14N_OBJ@
CATALOG_OBJ = @CATALOG_OBJ@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
CYGWIN_EXTRA_LDFLAGS = @CYGWIN_EXTRA_LDFLAGS@
CYGWIN_EXTRA_PYTHON_LIBADD = @CYGWIN_EXTRA_PYTHON_LIBADD@
DEBUG_OBJ = @DEBUG_OBJ@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOCB_OBJ = @DOCB_OBJ@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FTP_OBJ = @FTP_OBJ@
GREP = @GREP@
HAVE_ISINF = @HAVE_ISINF@
HAVE_ISNAN = @HAVE_ISNAN@
HTML_DIR = @HTML_DIR@
HTML_OBJ = @HTML_OBJ@
HTTP_OBJ = @HTTP_OBJ@
ICONV_LIBS = @ICONV_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_MAJOR_VERSION = @LIBXML_MAJOR_VERSION@
LIBXML_MICRO_VERSION = @LIBXML_MICRO_VERSION@
LIBXML_MINOR_VERSION = @LIBXML_MINOR_VERSION@
LIBXML_VERSION = @LIBXML_VERSION@
LIBXML_VERSION_EXTRA = @LIBXML_VERSION_EXTRA@
LIBXML_VERSION_INFO = @LIBXML_VERSION_INFO@
LIBXML_VERSION_NUMBER = @LIBXML_VERSION_NUMBER@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MODULE_EXTENSION = @MODULE_EXTENSION@
MODULE_PLATFORM_LIBS = @MODULE_PLATFORM_LIBS@
MV = @MV@
M_LIBS = @M_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PYTHON = @PYTHON@
PYTHON_INCLUDES = @PYTHON_INCLUDES@
PYTHON_LIBS = @PYTHON_LIBS@
PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@
PYTHON_SUBDIR = @PYTHON_SUBDIR@
PYTHON_TESTS = @PYTHON_TESTS@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RDL_LIBS = @RDL_LIBS@
READER_TEST = @READER_TEST@
RELDATE = @RELDATE@
RM = @RM@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STATIC_BINARIES = @STATIC_BINARIES@
STRIP = @STRIP@
TAR = @TAR@
TEST_C14N = @TEST_C14N@
TEST_CATALOG = @TEST_CATALOG@
TEST_DEBUG = @TEST_DEBUG@
TEST_HTML = @TEST_HTML@
TEST_MODULES = @TEST_MODULES@
TEST_PATTERN = @TEST_PATTERN@
TEST_PHTML = @TEST_PHTML@
TEST_PUSH = @TEST_PUSH@
TEST_REGEXPS = @TEST_REGEXPS@
TEST_SAX = @TEST_SAX@
TEST_SCHEMAS = @TEST_SCHEMAS@
TEST_SCHEMATRON = @TEST_SCHEMATRON@
TEST_THREADS = @TEST_THREADS@
TEST_VALID = @TEST_VALID@
TEST_VTIME = @TEST_VTIME@
TEST_XINCLUDE = @TEST_XINCLUDE@
TEST_XPATH = @TEST_XPATH@
TEST_XPTR = @TEST_XPTR@
THREADS_W32 = @THREADS_W32@
THREAD_CFLAGS = @THREAD_CFLAGS@
THREAD_LIBS = @THREAD_LIBS@
U = @U@
VERSION = @VERSION@
VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@
WGET = @WGET@
WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@
WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@
WITH_C14N = @WITH_C14N@
WITH_CATALOG = @WITH_CATALOG@
WITH_DEBUG = @WITH_DEBUG@
WITH_DOCB = @WITH_DOCB@
WITH_FTP = @WITH_FTP@
WITH_HTML = @WITH_HTML@
WITH_HTTP = @WITH_HTTP@
WITH_ICONV = @WITH_ICONV@
WITH_ISO8859X = @WITH_ISO8859X@
WITH_LEGACY = @WITH_LEGACY@
WITH_MEM_DEBUG = @WITH_MEM_DEBUG@
WITH_MODULES = @WITH_MODULES@
WITH_OUTPUT = @WITH_OUTPUT@
WITH_PATTERN = @WITH_PATTERN@
WITH_PUSH = @WITH_PUSH@
WITH_READER = @WITH_READER@
WITH_REGEXPS = @WITH_REGEXPS@
WITH_RUN_DEBUG = @WITH_RUN_DEBUG@
WITH_SAX1 = @WITH_SAX1@
WITH_SCHEMAS = @WITH_SCHEMAS@
WITH_SCHEMATRON = @WITH_SCHEMATRON@
WITH_THREADS = @WITH_THREADS@
WITH_TREE = @WITH_TREE@
WITH_TRIO = @WITH_TRIO@
WITH_VALID = @WITH_VALID@
WITH_WRITER = @WITH_WRITER@
WITH_XINCLUDE = @WITH_XINCLUDE@
WITH_XPATH = @WITH_XPATH@
WITH_XPTR = @WITH_XPTR@
WITH_ZLIB = @WITH_ZLIB@
XINCLUDE_OBJ = @XINCLUDE_OBJ@
XMLLINT = @XMLLINT@
XML_CFLAGS = @XML_CFLAGS@
XML_INCLUDEDIR = @XML_INCLUDEDIR@
XML_LIBDIR = @XML_LIBDIR@
XML_LIBS = @XML_LIBS@
XML_LIBTOOLLIBS = @XML_LIBTOOLLIBS@
XPATH_OBJ = @XPATH_OBJ@
XPTR_OBJ = @XPTR_OBJ@
XSLTPROC = @XSLTPROC@
Z_CFLAGS = @Z_CFLAGS@
Z_LIBS = @Z_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
exampledir = $(datadir)/doc/libxml2-python-$(LIBXML_VERSION)/examples
dist_example_DATA = $(PYTESTS) $(XMLS)
PYTESTS = \
    build.py	\
    attribs.py	\
    tst.py	\
    tstxpath.py	\
    xpathext.py	\
    push.py	\
    pushSAX.py	\
    pushSAXhtml.py \
    error.py	\
    serialize.py\
    validate.py	\
    tstURI.py	\
    cutnpaste.py\
    xpathret.py	\
    xpath.py	\
    outbuf.py	\
    inbuf.py	\
    resolver.py \
    regexp.py	\
    reader.py	\
    reader2.py	\
    reader3.py	\
    reader4.py	\
    reader5.py	\
    reader6.py	\
    reader7.py	\
    reader8.py	\
    readernext.py	\
    walker.py	\
    nsdel.py	\
    ctxterror.py\
    readererr.py\
    relaxng.py	\
    schema.py	\
    thread2.py \
    sync.py \
    tstLastError.py \
    indexes.py \
    dtdvalid.py \
    tstmem.py	\
    validDTD.py	\
    validSchemas.py \
    validRNG.py \
    compareNodes.py \
    xpathns.py \
    xpathleak.py

XMLS = \
    tst.xml	\
    valid.xml	\
    invalid.xml	\
    test.dtd

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu python/tests/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu python/tests/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-dist_exampleDATA: $(dist_example_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(exampledir)" || $(MKDIR_P) "$(DESTDIR)$(exampledir)"
	@list='$(dist_example_DATA)'; test -n "$(exampledir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \
	done

uninstall-dist_exampleDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_example_DATA)'; test -n "$(exampledir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(exampledir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(exampledir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(exampledir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-dist_exampleDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_exampleDATA

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dist_exampleDATA \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am uninstall uninstall-am uninstall-dist_exampleDATA


@WITH_PYTHON_TRUE@tests: $(PYTESTS)
@WITH_PYTHON_TRUE@	@echo "## running Python regression tests"
@WITH_PYTHON_TRUE@	-@(PYTHONPATH="..:../.libs:$(srcdir)/..:$$PYTHONPATH" ; \
@WITH_PYTHON_TRUE@	   export PYTHONPATH; \
@WITH_PYTHON_TRUE@	   LD_LIBRARY_PATH="$(top_builddir)/.libs:$$LD_LIBRARY_PATH" ; \
@WITH_PYTHON_TRUE@	   export LD_LIBRARY_PATH; \
@WITH_PYTHON_TRUE@	   for test in $(PYTESTS) ; \
@WITH_PYTHON_TRUE@	   do log=`$(PYTHON) $(srcdir)/$$test` ; \
@WITH_PYTHON_TRUE@	   if [ "`echo $$log | grep OK`" = "" ] ; then \
@WITH_PYTHON_TRUE@	   echo "-- $$test" ; echo "$$log" ; fi ; done)
@WITH_PYTHON_FALSE@tests:

clean:
	rm -f *.pyc core

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: