# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASE_THREAD_LIBS = @BASE_THREAD_LIBS@
C14N_OBJ = @C14N_OBJ@
CATALOG_OBJ = @CATALOG_OBJ@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
CYGWIN_EXTRA_LDFLAGS = @CYGWIN_EXTRA_LDFLAGS@
CYGWIN_EXTRA_PYTHON_LIBADD = @CYGWIN_EXTRA_PYTHON_LIBADD@
DEBUG_OBJ = @DEBUG_OBJ@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOCB_OBJ = @DOCB_OBJ@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FTP_OBJ = @FTP_OBJ@
GREP = @GREP@
HAVE_ISINF = @HAVE_ISINF@
HAVE_ISNAN = @HAVE_ISNAN@
HTML_DIR = @HTML_DIR@
HTML_OBJ = @HTML_OBJ@
HTTP_OBJ = @HTTP_OBJ@
ICONV_LIBS = @ICONV_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_MAJOR_VERSION = @LIBXML_MAJOR_VERSION@
LIBXML_MICRO_VERSION = @LIBXML_MICRO_VERSION@
LIBXML_MINOR_VERSION = @LIBXML_MINOR_VERSION@
LIBXML_VERSION = @LIBXML_VERSION@
LIBXML_VERSION_EXTRA = @LIBXML_VERSION_EXTRA@
LIBXML_VERSION_INFO = @LIBXML_VERSION_INFO@
LIBXML_VERSION_NUMBER = @LIBXML_VERSION_NUMBER@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MODULE_EXTENSION = @MODULE_EXTENSION@
MODULE_PLATFORM_LIBS = @MODULE_PLATFORM_LIBS@
MV = @MV@
M_LIBS = @M_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PYTHON = @PYTHON@
PYTHON_INCLUDES = @PYTHON_INCLUDES@
PYTHON_LIBS = @PYTHON_LIBS@
PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@
PYTHON_SUBDIR = @PYTHON_SUBDIR@
PYTHON_TESTS = @PYTHON_TESTS@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RDL_LIBS = @RDL_LIBS@
READER_TEST = @READER_TEST@
RELDATE = @RELDATE@
RM = @RM@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STATIC_BINARIES = @STATIC_BINARIES@
STRIP = @STRIP@
TAR = @TAR@
TEST_C14N = @TEST_C14N@
TEST_CATALOG = @TEST_CATALOG@
TEST_DEBUG = @TEST_DEBUG@
TEST_HTML = @TEST_HTML@
TEST_MODULES = @TEST_MODULES@
TEST_PATTERN = @TEST_PATTERN@
TEST_PHTML = @TEST_PHTML@
TEST_PUSH = @TEST_PUSH@
TEST_REGEXPS = @TEST_REGEXPS@
TEST_SAX = @TEST_SAX@
TEST_SCHEMAS = @TEST_SCHEMAS@
TEST_SCHEMATRON = @TEST_SCHEMATRON@
TEST_THREADS = @TEST_THREADS@
TEST_VALID = @TEST_VALID@
TEST_VTIME = @TEST_VTIME@
TEST_XINCLUDE = @TEST_XINCLUDE@
TEST_XPATH = @TEST_XPATH@
TEST_XPTR = @TEST_XPTR@
THREADS_W32 = @THREADS_W32@
THREAD_CFLAGS = @THREAD_CFLAGS@
THREAD_LIBS = @THREAD_LIBS@
U = @U@
VERSION = @VERSION@
VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@
WGET = @WGET@
WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@
WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@
WITH_C14N = @WITH_C14N@
WITH_CATALOG = @WITH_CATALOG@
WITH_DEBUG = @WITH_DEBUG@
WITH_DOCB = @WITH_DOCB@
WITH_FTP = @WITH_FTP@
WITH_HTML = @WITH_HTML@
WITH_HTTP = @WITH_HTTP@
WITH_ICONV = @WITH_ICONV@
WITH_ISO8859X = @WITH_ISO8859X@
WITH_LEGACY = @WITH_LEGACY@
WITH_MEM_DEBUG = @WITH_MEM_DEBUG@
WITH_MODULES = @WITH_MODULES@
WITH_OUTPUT = @WITH_OUTPUT@
WITH_PATTERN = @WITH_PATTERN@
WITH_PUSH = @WITH_PUSH@
WITH_READER = @WITH_READER@
WITH_REGEXPS = @WITH_REGEXPS@
WITH_RUN_DEBUG = @WITH_RUN_DEBUG@
WITH_SAX1 = @WITH_SAX1@
WITH_SCHEMAS = @WITH_SCHEMAS@
WITH_SCHEMATRON = @WITH_SCHEMATRON@
WITH_THREADS = @WITH_THREADS@
WITH_TREE = @WITH_TREE@
WITH_TRIO = @WITH_TRIO@
WITH_VALID = @WITH_VALID@
WITH_WRITER = @WITH_WRITER@
WITH_XINCLUDE = @WITH_XINCLUDE@
WITH_XPATH = @WITH_XPATH@
WITH_XPTR = @WITH_XPTR@
WITH_ZLIB = @WITH_ZLIB@
XINCLUDE_OBJ = @XINCLUDE_OBJ@
XMLLINT = @XMLLINT@
XML_CFLAGS = @XML_CFLAGS@
XML_INCLUDEDIR = @XML_INCLUDEDIR@
XML_LIBDIR = @XML_LIBDIR@
XML_LIBS = @XML_LIBS@
XML_LIBTOOLLIBS = @XML_LIBTOOLLIBS@
XPATH_OBJ = @XPATH_OBJ@
XPTR_OBJ = @XPTR_OBJ@
XSLTPROC = @XSLTPROC@
Z_CFLAGS = @Z_CFLAGS@
Z_LIBS = @Z_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = devhelp examples

# The top-level SGML file.
DOC_MAIN_XML_FILE = gnome-xml.xml

# The directory containing the source code (if it contains documentation).
DOC_SOURCE_DIR = ..

# A file in win32 depends upon one of the doc files
WIN32_DIR = $(top_srcdir)/win32
PAGES = architecture.html bugs.html contribs.html docs.html DOM.html \
    downloads.html entities.html example.html help.html index.html \
    interface.html intro.html library.html namespaces.html news.html \
    tree.html xmldtd.html XMLinfo.html XSLT.html

APIPAGES = APIconstructors.html APIfiles.html APIfunctions.html \
    APIsymbols.html APIchunk0.html

EXTRA_DIST = xmlcatalog_man.xml tutorial/*.html tutorial/*.c tutorial/*.pdf \
           tutorial/images/*.png tutorial/images/callouts/*.png \
	   API*.html *.1 *.xsl *.html *.gif w3c.png html/*.html \
	   html/*.png libxml2-api.xml index.py search.php \
	   apibuild.py libxml2.xsa xmllint.xml xmlcatalog_man.xml \
	   README.docs symbols.xml

man_MANS = xmllint.1 xmlcatalog.1
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list=''; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-man

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-man

uninstall-man: uninstall-man1

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	clean-local ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-man uninstall-man1


@REBUILD_DOCS_TRUE@all: web $(top_builddir)/NEWS libxml2.xsa $(man_MANS)
@REBUILD_DOCS_FALSE@all:

api: libxml2-api.xml libxml2-refs.xml $(APIPAGES) $(srcdir)/html/index.html $(WIN32_DIR)/libxml2.def.src ../elfgcchack.h $(srcdir)/site.xsl

web: $(PAGES)

../elfgcchack.h: $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml
	-@(if [ -x $(XSLTPROC) ] ; then \
	  echo "Rebuilding the elfgcchack.h header" ; \
	  $(XSLTPROC) --nonet $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml > elfgcchack.h ; \
	  if [ "`diff -q elfgcchack.h ../elfgcchack.h`" ] ; then \
	    echo "updating ../elfgcchack.h"; \
	    cp elfgcchack.h ../elfgcchack.h; \
	  fi ; rm -f elfgcchack.h ;  fi );

$(PAGES): xml.html site.xsl
	-@(if [ -x $(XSLTPROC) ] ; then \
	  echo "Rebuilding the HTML Web pages from xml.html" ; \
	  $(XSLTPROC) --nonet --html $(top_srcdir)/doc/site.xsl $(top_srcdir)/doc/xml.html > index.html ; fi );
	-@(if [ -x $(XMLLINT) ] ; then \
	  echo "Validating the HTML Web pages" ; \
	  $(XMLLINT) --nonet --valid --noout $(PAGES) ; fi );

$(top_builddir)/NEWS: $(top_srcdir)/doc/news.xsl $(top_srcdir)/doc/news.html
	-@(if [ -x $(XSLTPROC) ] ; then \
	  $(XSLTPROC) --nonet $(top_srcdir)/doc/news.xsl $(top_srcdir)/doc/news.html > $(top_builddir)/NEWS ; fi );

libxml2.xsa: $(top_srcdir)/doc/xsa.xsl $(top_srcdir)/doc/news.html
	-@(if [ -x $(XSLTPROC) ] ; then \
	  echo "Rebuilding the NEWS file" ; \
	  $(XSLTPROC) --nonet $(top_srcdir)/doc/xsa.xsl $(top_srcdir)/doc/news.html > libxml2.xsa ; fi );

$(APIPAGES): libxml2-api.xml libxml2-refs.xml $(top_srcdir)/doc/site.xsl $(top_srcdir)/doc/api.xsl
	-@(if [ -x $(XSLTPROC) ] ; then \
	  echo "Rebuilding the HTML API pages from libxml2-refs.xml" ; \
	  $(XSLTPROC) --nonet --html $(top_srcdir)/doc/api.xsl \
	                     $(top_srcdir)/doc/xml.html ; fi );
	-@(if [ -x $(XMLLINT) ] ; then \
	  echo "Validating the HTML API pages" ; \
	  $(XMLLINT) --nonet --valid --noout API*.html ; fi );

$(srcdir)/html/index.html: libxml2-api.xml $(srcdir)/newapi.xsl
	-@(if [ -x $(XSLTPROC) ] ; then \
	  echo "Rebuilding the HTML pages from the XML API" ; \
	  $(XSLTPROC) --nonet $(srcdir)/newapi.xsl libxml2-api.xml ; fi )
	-@(if [ -x $(XMLLINT) ] ; then \
	  echo "Validating the resulting XHTML pages" ; \
	  $(XMLLINT) --nonet --valid --noout html/*.html ; fi );

wiki: libxml2-api.xml $(srcdir)/wiki.xsl
	-@(if [ -x $(XSLTPROC) ] ; then \
		echo "Rebuilding the wiki HTML pages from the XML API" ; \
		$(XSLTPROC) --nonet $(srcdir)/wiki.xsl libxml2-api.xml; fi )

$(WIN32_DIR)/libxml2.def.src: libxml2-api.xml
	-@(if [ -x $(XSLTPROC) ] ; then \
	  $(XSLTPROC) -o $(WIN32_DIR)/libxml2.def.src \
	  --nonet $(WIN32_DIR)/defgen.xsl libxml2-api.xml ; fi )

libxml2-api.xml libxml2-refs.xml ../libxml2.syms: apibuild.py symbols.xml syms.xsl checkapisym.xsl ../include/libxml/*.h ../*.c
	-(./apibuild.py)
	($(XSLTPROC) checkapisym.xsl libxml2-api.xml)
	($(XSLTPROC) -o ../libxml2.syms syms.xsl symbols.xml)
	-@(cd .. ; $(MAKE) rebuild_testapi)

xmllint.1: xmllint.xml
	-@($(XSLTPROC) --nonet xmllint.xml)

xmlcatalog.1: xmlcatalog_man.xml
	-@($(XSLTPROC) --nonet xmlcatalog_man.xml)

clean-local:
	rm -f *~ *.bak *.hierarchy *.signals *-unused.txt

maintainer-clean-local: clean-local
	rm -rf libxml-decl-list.txt libxml-decl.txt 

rebuild: api all

install-data-local: 
	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)
	-@INSTALL@ -m 0644 $(srcdir)/xml.html $(srcdir)/encoding.html $(srcdir)/FAQ.html $(srcdir)/structure.gif $(srcdir)/DOM.gif $(srcdir)/smallfootonly.gif $(srcdir)/redhat.gif $(srcdir)/libxml.gif $(srcdir)/w3c.png $(srcdir)/Libxml2-Logo-180x168.gif $(srcdir)/Libxml2-Logo-90x34.gif $(DESTDIR)$(HTML_DIR)
	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/html
	-@INSTALL@ -m 0644 $(srcdir)/html/*.html $(DESTDIR)$(HTML_DIR)/html
	-@INSTALL@ -m 0644 $(srcdir)/html/*.png $(DESTDIR)$(HTML_DIR)/html
	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/tutorial
	-@INSTALL@ -m 0644 $(srcdir)/tutorial/*.* \
		$(DESTDIR)$(HTML_DIR)/tutorial
	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/tutorial/images
	-@INSTALL@ -m 0644 $(srcdir)/tutorial/images/*.* \
		$(DESTDIR)$(HTML_DIR)/tutorial/images
	$(mkinstalldirs) $(DESTDIR)$(HTML_DIR)/tutorial/images/callouts
	-@INSTALL@ -m 0644 $(srcdir)/tutorial/images/callouts/*.* \
		$(DESTDIR)$(HTML_DIR)/tutorial/images/callouts

.PHONY : html xml templates scan

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: