/*
 * $Id: pmcc4_drv.c,v 3.1 2007/08/15 23:32:17 rickd PMCC4_3_1B $
 */


/*-----------------------------------------------------------------------------
 * pmcc4_drv.c -
 *
 * Copyright (C) 2007  One Stop Systems, Inc.
 * Copyright (C) 2002-2006  SBE, Inc.
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 * For further information, contact via email: support@onestopsystems.com
 * One Stop Systems, Inc.  Escondido, California  U.S.A.
 *-----------------------------------------------------------------------------
 * RCS info:
 * RCS revision: $Revision: 3.1 $
 * Last changed on $Date: 2007/08/15 23:32:17 $
 * Changed by $Author: rickd $
 *-----------------------------------------------------------------------------
 * $Log: pmcc4_drv.c,v $
 * Revision 3.1  2007/08/15 23:32:17  rickd
 * Use 'if 0' instead of GNU comment delimeter to avoid line wrap induced compiler errors.
 *
 * Revision 3.0  2007/08/15 22:19:55  rickd
 * Correct sizeof() castings and pi->regram to support 64bit compatibility.
 *
 * Revision 2.10  2006/04/21 00:56:40  rickd
 * workqueue files now prefixed with <sbecom> prefix.
 *
 * Revision 2.9  2005/11/01 19:22:49  rickd
 * Add sanity checks against max_port for ioctl functions.
 *
 * Revision 2.8  2005/10/27 18:59:25  rickd
 * Code cleanup.  Default channel config to HDLC_FCS16.
 *
 * Revision 2.7  2005/10/18 18:16:30  rickd
 * Further NCOMM code repairs - (1) interrupt matrix usage inconsistant
 * for indexing into nciInterrupt[][], code missing double parameters.
 * (2) check input of ncomm interrupt registration cardID for correct
 * boundary values.
 *
 * Revision 2.6  2005/10/17 23:55:28  rickd
 * Initial port of NCOMM support patches from original work found
 * in pmc_c4t1e1 as updated by NCOMM.  Ref: CONFIG_SBE_PMCC4_NCOMM.
 * Corrected NCOMMs wanpmcC4T1E1_getBaseAddress() to correctly handle
 * multiple boards.
 *
 * Revision 2.5  2005/10/13 23:01:28  rickd
 * Correct panic for illegal address reference w/in get_brdinfo on
 * first_if/last_if name acquistion under Linux 2.6
 *
 * Revision 2.4  2005/10/13 21:20:19  rickd
 * Correction of c4_cleanup() wherein next should be acquired before
 * ci_t structure is free'd.
 *
 * Revision 2.3  2005/10/13 19:20:10  rickd
 * Correct driver removal cleanup code for multiple boards.
 *
 * Revision 2.2  2005/10/11 18:34:04  rickd
 * New routine added to determine number of ports (comets) on board.
 *
 * Revision 2.1  2005/10/05 00:48:13  rickd
 * Add some RX activation trace code.
 *
 * Revision 2.0  2005/09/28 00:10:06  rickd
 * Implement 2.6 workqueue for TX/RX restart.  Correction to
 * hardware register boundary checks allows expanded access of MUSYCC.
 * Implement new musycc reg&bits namings.
 *
 *-----------------------------------------------------------------------------
 */

char        OSSIid_pmcc4_drvc[] =
"@(#)pmcc4_drv.c - $Revision: 3.1 $   (c) Copyright 2002-2007 One Stop Systems, Inc.";

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#if defined (__FreeBSD__) || defined (__NetBSD__)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#else
#include <linux/types.h>
#include "pmcc4_sysdep.h"
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>        /* include for timer */
#include <linux/timer.h>        /* include for timer */
#include <linux/hdlc.h>
#include <asm/io.h>
#endif

#include "sbecom_inline_linux.h"
#include "libsbew.h"
#include "pmcc4_private.h"
#include "pmcc4.h"
#include "pmcc4_ioctls.h"
#include "musycc.h"
#include "comet.h"
#include "sbe_bid.h"

#ifdef SBE_INCLUDE_SYMBOLS
#define STATIC
#else
#define STATIC  static
#endif


#define KERN_WARN KERN_WARNING

/* forward references */
status_t    c4_wk_chan_init (mpi_t *, mch_t *);
void        c4_wq_port_cleanup (mpi_t *);
status_t    c4_wq_port_init (mpi_t *);

int         c4_loop_port (ci_t *, int, u_int8_t);
status_t    c4_set_port (ci_t *, int);
status_t    musycc_chan_down (ci_t *, int);

u_int32_t musycc_chan_proto (int);
status_t    musycc_dump_ring (ci_t *, unsigned int);
status_t __init musycc_init (ci_t *);
void        musycc_init_mdt (mpi_t *);
void        musycc_serv_req (mpi_t *, u_int32_t);
void        musycc_update_timeslots (mpi_t *);

extern void musycc_update_tx_thp (mch_t *);
extern int  log_level;
extern int  cxt1e1_max_mru;
extern int  cxt1e1_max_mtu;
extern int  max_rxdesc_used, max_rxdesc_default;
extern int  max_txdesc_used, max_txdesc_default;

#if defined (__powerpc__)
extern void *memset (void *s, int c, size_t n);

#endif

int         drvr_state = SBE_DRVR_INIT;
ci_t       *c4_list = 0;
ci_t       *CI;                 /* dummy pointer to board ZEROE's data -
                                 * DEBUG USAGE */


void
sbecom_set_loglevel (int d)
{
    /*
     * The code within the following -if- clause is a backdoor debug facility
     * which can be used to display the state of a board's channel.
     */
    if (d > LOG_DEBUG)
    {
        unsigned int channum = d - (LOG_DEBUG + 1);     /* convert to ZERO
                                                         * relativity */

        (void) musycc_dump_ring ((ci_t *) CI, channum); /* CI implies support
                                                         * for card 0 only */
    } else
    {
        if (log_level != d)
        {
            pr_info("log level changed from %d to %d\n", log_level, d);
            log_level = d;          /* set new */
        } else
            pr_info("log level is %d\n", log_level);
    }
}


mch_t      *
c4_find_chan (int channum)
{
    ci_t       *ci;
    mch_t      *ch;
    int         portnum, gchan;

    for (ci = c4_list; ci; ci = ci->next)
        for (portnum = 0; portnum < ci->max_port; portnum++)
            for (gchan = 0; gchan < MUSYCC_NCHANS; gchan++)
            {
                if ((ch = ci->port[portnum].chan[gchan]))
                {
                    if ((ch->state != UNASSIGNED) &&
                        (ch->channum == channum))
                        return (ch);
                }
            }
    return 0;
}


ci_t       *__init
c4_new (void *hi)
{
    ci_t       *ci;

#ifdef SBE_MAP_DEBUG
    pr_warning("c4_new() entered, ci needs %u.\n",
               (unsigned int) sizeof (ci_t));
#endif

    ci = (ci_t *) OS_kmalloc (sizeof (ci_t));
    if (ci)
    {
        ci->hdw_info = hi;
        ci->state = C_INIT;         /* mark as hardware not available */
        ci->next = c4_list;
        c4_list = ci;
        ci->brdno = ci->next ? ci->next->brdno + 1 : 0;
    } else
        pr_warning("failed CI malloc, size %u.\n",
                   (unsigned int) sizeof (ci_t));

    if (CI == 0)
        CI = ci;                    /* DEBUG, only board 0 usage */
    return ci;
}


/***
 * Check port state and set LED states using watchdog or ioctl...
 * also check for in-band SF loopback commands (& cause results if they are there)
 *
 * Alarm function depends on comet bits indicating change in
 * link status (linkMask) to keep the link status indication straight.
 *
 * Indications are only LED and system log -- except when ioctl is invoked.
 *
 * "alarmed" record (a.k.a. copyVal, in some cases below) decodes as:
 *
 *   RMAI  (E1 only) 0x100
 *   alarm LED on    0x80
 *   link LED on     0x40
 *   link returned   0x20 (link was down, now it's back and 'port get' hasn't run)
 *   change in LED   0x10 (update LED register because value has changed)
 *   link is down    0x08
 *   YelAlm(RAI)     0x04
 *   RedAlm          0x02
 *   AIS(blue)Alm    0x01
 *
 * note "link has returned" indication is reset on read
 * (e.g. by use of the c4_control port get command)
 */

#define sbeLinkMask       0x41  /* change in signal status (lost/recovered) +
                                 * state */
#define sbeLinkChange     0x40
#define sbeLinkDown       0x01
#define sbeAlarmsMask     0x07  /* red / yellow / blue alarm conditions */
#define sbeE1AlarmsMask   0x107 /* alarm conditions */

#define COMET_LBCMD_READ  0x80  /* read only (do not set, return read value) */

void
checkPorts (ci_t * ci)
{
#ifndef CONFIG_SBE_PMCC4_NCOMM
    /*
     * PORT POINT - NCOMM needs to avoid this code since the polling of
     * alarms conflicts with NCOMM's interrupt servicing implementation.
     */

    comet_t    *comet;
    volatile u_int32_t value;
    u_int32_t   copyVal, LEDval;

    u_int8_t portnum;

    LEDval = 0;
    for (portnum = 0; portnum < ci->max_port; portnum++)
    {
        copyVal = 0x12f & (ci->alarmed[portnum]);       /* port's alarm record */
        comet = ci->port[portnum].cometbase;
        value = pci_read_32 ((u_int32_t *) &comet->cdrc_ists) & sbeLinkMask;    /* link loss reg */

        if (value & sbeLinkChange)  /* is there a change in the link stuff */
        {
            /* if there's been a change (above) and yet it's the same (below) */
            if (!(((copyVal >> 3) & sbeLinkDown) ^ (value & sbeLinkDown)))
            {
                if (value & sbeLinkDown)
                    pr_warning("%s: Port %d momentarily recovered.\n",
                               ci->devname, portnum);
                else
                    pr_warning("%s: Warning: Port %d link was briefly down.\n",
                               ci->devname, portnum);
            } else if (value & sbeLinkDown)
                pr_warning("%s: Warning: Port %d link is down.\n",
                           ci->devname, portnum);
            else
            {
                pr_warning("%s: Port %d link has recovered.\n",
                           ci->devname, portnum);
                copyVal |= 0x20;    /* record link transition to up */
            }
            copyVal |= 0x10;        /* change (link) --> update LEDs  */
        }
        copyVal &= 0x137;           /* clear LED & link old history bits &
                                     * save others */
        if (value & sbeLinkDown)
            copyVal |= 0x08;        /* record link status (now) */
        else
        {                           /* if link is up, do this */
            copyVal |= 0x40;        /* LED indicate link is up    */
            /* Alarm things & the like ... first if E1, then if T1 */
            if (IS_FRAME_ANY_E1 (ci->port[portnum].p.port_mode))
            {
                /*
                 * first check Codeword (SaX) changes & CRC and
                 * sub-multi-frame errors
                 */
                /*
                 * note these errors are printed every time they are detected
                 * vs. alarms
                 */
                value = pci_read_32 ((u_int32_t *) &comet->e1_frmr_nat_ists);   /* codeword */
                if (value & 0x1f)
                {                   /* if errors (crc or smf only) */
                    if (value & 0x10)
                        pr_warning("%s: E1 Port %d Codeword Sa4 change detected.\n",
                                   ci->devname, portnum);
                    if (value & 0x08)
                        pr_warning("%s: E1 Port %d Codeword Sa5 change detected.\n",
                                   ci->devname, portnum);
                    if (value & 0x04)
                        pr_warning("%s: E1 Port %d Codeword Sa6 change detected.\n",
                                   ci->devname, portnum);
                    if (value & 0x02)
                        pr_warning("%s: E1 Port %d Codeword Sa7 change detected.\n",
                                   ci->devname, portnum);
                    if (value & 0x01)
                        pr_warning("%s: E1 Port %d Codeword Sa8 change detected.\n",
                                   ci->devname, portnum);
                }
                value = pci_read_32 ((u_int32_t *) &comet->e1_frmr_mists);      /* crc & smf */
                if (value & 0x3)
                {                   /* if errors (crc or smf only) */
                    if (value & sbeE1CRC)
                        pr_warning("%s: E1 Port %d CRC-4 error(s) detected.\n",
                                   ci->devname, portnum);
                    if (value & sbeE1errSMF)    /* error in sub-multiframe */
                        pr_warning("%s: E1 Port %d received errored SMF.\n",
                                   ci->devname, portnum);
                }
                value = pci_read_32 ((u_int32_t *) &comet->e1_frmr_masts) & 0xcc; /* alarms */
                /*
                 * pack alarms together (bitmiser), and construct similar to
                 * T1
                 */
                /* RAI,RMAI,.,.,LOF,AIS,.,. ==>  RMAI,.,.,.,.,.,RAI,LOF,AIS */
                /* see 0x97 */
                value = (value >> 2);
                if (value & 0x30)
                {
                    if (value & 0x20)
                        value |= 0x40;  /* RAI */
                    if (value & 0x10)
                        value |= 0x100; /* RMAI */
                    value &= ~0x30;
                }                   /* finished packing alarm in handy order */
                if (value != (copyVal & sbeE1AlarmsMask))
                {                   /* if alarms changed */
                    copyVal |= 0x10;/* change LED status   */
                    if ((copyVal & sbeRedAlm) && !(value & sbeRedAlm))
                    {
                        copyVal &= ~sbeRedAlm;
                        pr_warning("%s: E1 Port %d LOF alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeRedAlm) && (value & sbeRedAlm))
                    {
                        copyVal |= sbeRedAlm;
                        pr_warning("%s: E1 Warning: Port %d LOF alarm.\n",
                                   ci->devname, portnum);
                    } else if ((copyVal & sbeYelAlm) && !(value & sbeYelAlm))
                    {
                        copyVal &= ~sbeYelAlm;
                        pr_warning("%s: E1 Port %d RAI alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeYelAlm) && (value & sbeYelAlm))
                    {
                        copyVal |= sbeYelAlm;
                        pr_warning("%s: E1 Warning: Port %d RAI alarm.\n",
                                   ci->devname, portnum);
                    } else if ((copyVal & sbeE1RMAI) && !(value & sbeE1RMAI))
                    {
                        copyVal &= ~sbeE1RMAI;
                        pr_warning("%s: E1 Port %d RMAI alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeE1RMAI) && (value & sbeE1RMAI))
                    {
                        copyVal |= sbeE1RMAI;
                        pr_warning("%s: E1 Warning: Port %d RMAI alarm.\n",
                                   ci->devname, portnum);
                    } else if ((copyVal & sbeAISAlm) && !(value & sbeAISAlm))
                    {
                        copyVal &= ~sbeAISAlm;
                        pr_warning("%s: E1 Port %d AIS alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeAISAlm) && (value & sbeAISAlm))
                    {
                        copyVal |= sbeAISAlm;
                        pr_warning("%s: E1 Warning: Port %d AIS alarm.\n",
                                   ci->devname, portnum);
                    }
                }
                /* end of E1 alarm code */
            } else
            {                       /* if a T1 mode */
                value = pci_read_32 ((u_int32_t *) &comet->t1_almi_ists);       /* alarms */
                value &= sbeAlarmsMask;
                if (value != (copyVal & sbeAlarmsMask))
                {                   /* if alarms changed */
                    copyVal |= 0x10;/* change LED status   */
                    if ((copyVal & sbeRedAlm) && !(value & sbeRedAlm))
                    {
                        copyVal &= ~sbeRedAlm;
                        pr_warning("%s: Port %d red alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeRedAlm) && (value & sbeRedAlm))
                    {
                        copyVal |= sbeRedAlm;
                        pr_warning("%s: Warning: Port %d red alarm.\n",
                                   ci->devname, portnum);
                    } else if ((copyVal & sbeYelAlm) && !(value & sbeYelAlm))
                    {
                        copyVal &= ~sbeYelAlm;
                        pr_warning("%s: Port %d yellow (RAI) alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeYelAlm) && (value & sbeYelAlm))
                    {
                        copyVal |= sbeYelAlm;
                        pr_warning("%s: Warning: Port %d yellow (RAI) alarm.\n",
                                   ci->devname, portnum);
                    } else if ((copyVal & sbeAISAlm) && !(value & sbeAISAlm))
                    {
                        copyVal &= ~sbeAISAlm;
                        pr_warning("%s: Port %d blue (AIS) alarm ended.\n",
                                   ci->devname, portnum);
                    } else if (!(copyVal & sbeAISAlm) && (value & sbeAISAlm))
                    {
                        copyVal |= sbeAISAlm;
                        pr_warning("%s: Warning: Port %d blue (AIS) alarm.\n",
                                   ci->devname, portnum);
                    }
                }
            }                       /* end T1 mode alarm checks */
        }
        if (copyVal & sbeAlarmsMask)
            copyVal |= 0x80;        /* if alarm turn yel LED on */
        if (copyVal & 0x10)
            LEDval |= 0x100;        /* tag if LED values have changed  */
        LEDval |= ((copyVal & 0xc0) >> (6 - (portnum * 2)));

        ci->alarmed[portnum] &= 0xfffff000;     /* out with the old (it's fff
                                                 * ... foo) */
        ci->alarmed[portnum] |= (copyVal);      /* in with the new */

        /*
         * enough with the alarms and LED's, now let's check for loopback
         * requests
         */

        if (IS_FRAME_ANY_T1 (ci->port[portnum].p.port_mode))
        {                           /* if a T1 mode  */
            /*
             * begin in-band (SF) loopback code detection -- start by reading
             * command
             */
            value = pci_read_32 ((u_int32_t *) &comet->ibcd_ies);       /* detect reg. */
            value &= 0x3;           /* trim to handy bits */
            if (value & 0x2)
            {                       /* activate loopback (sets for deactivate
                                     * code length) */
                copyVal = c4_loop_port (ci, portnum, COMET_LBCMD_READ); /* read line loopback
                                                                         * mode */
                if (copyVal != COMET_MDIAG_LINELB)      /* don't do it again if
                                                         * already in that mode */
                    c4_loop_port (ci, portnum, COMET_MDIAG_LINELB);     /* put port in line
                                                                         * loopback mode */
            }
            if (value & 0x1)
            {                       /* deactivate loopback (sets for activate
                                     * code length) */
                copyVal = c4_loop_port (ci, portnum, COMET_LBCMD_READ); /* read line loopback
                                                                         * mode */
                if (copyVal != COMET_MDIAG_LBOFF)       /* don't do it again if
                                                         * already in that mode */
                    c4_loop_port (ci, portnum, COMET_MDIAG_LBOFF);      /* take port out of any
                                                                         * loopback mode */
            }
        }
        if (IS_FRAME_ANY_T1ESF (ci->port[portnum].p.port_mode))
        {                           /* if a T1 ESF mode  */
            /* begin ESF loopback code */
            value = pci_read_32 ((u_int32_t *) &comet->t1_rboc_sts) & 0x3f;     /* read command */
            if (value == 0x07)
                c4_loop_port (ci, portnum, COMET_MDIAG_LINELB); /* put port in line
                                                                 * loopback mode */
            if (value == 0x0a)
                c4_loop_port (ci, portnum, COMET_MDIAG_PAYLB);  /* put port in payload
                                                                 * loopbk mode */
            if ((value == 0x1c) || (value == 0x19) || (value == 0x12))
                c4_loop_port (ci, portnum, COMET_MDIAG_LBOFF);  /* take port out of any
                                                                 * loopbk mode */
            if (log_level >= LOG_DEBUG)
                if (value != 0x3f)
                    pr_warning("%s: BOC value = %x on Port %d\n",
                               ci->devname, value, portnum);
            /* end ESF loopback code */
        }
    }

    /* if something is new, update LED's */
    if (LEDval & 0x100)
        pci_write_32 ((u_int32_t *) &ci->cpldbase->leds, LEDval & 0xff);
#endif                              /*** CONFIG_SBE_PMCC4_NCOMM ***/
}


STATIC void
c4_watchdog (ci_t * ci)
{
    if (drvr_state != SBE_DRVR_AVAILABLE)
    {
        if (log_level >= LOG_MONITOR)
            pr_info("drvr not available (%x)\n", drvr_state);
        return;
    }
    ci->wdcount++;
    checkPorts (ci);
    ci->wd_notify = 0;
}


void
c4_cleanup (void)
{
    ci_t       *ci, *next;
    mpi_t      *pi;
    int         portnum, j;

    ci = c4_list;
    while (ci)
    {
        next = ci->next;            /* protect <next> from upcoming <free> */
        pci_write_32 ((u_int32_t *) &ci->cpldbase->leds, PMCC4_CPLD_LED_OFF);
        for (portnum = 0; portnum < ci->max_port; portnum++)
        {
            pi = &ci->port[portnum];
            c4_wq_port_cleanup (pi);
            for (j = 0; j < MUSYCC_NCHANS; j++)
            {
                if (pi->chan[j])
                    OS_kfree (pi->chan[j]);     /* free mch_t struct */
            }
            OS_kfree (pi->regram_saved);
        }
        OS_kfree (ci->iqd_p_saved);
        OS_kfree (ci);
        ci = next;                  /* cleanup next board, if any */
    }
}


/*
 * This function issues a write to all comet chips and expects the same data
 * to be returned from the subsequent read.  This determines the board build
 * to be a 1-port, 2-port, or 4-port build.  The value returned represents a
 * bit-mask of the found ports.  Only certain configurations are considered
 * VALID or LEGAL builds.
 */

int
c4_get_portcfg (ci_t * ci)
{
    comet_t    *comet;
    int         portnum, mask;
    u_int32_t   wdata, rdata;

    wdata = COMET_MDIAG_LBOFF;      /* take port out of any loopback mode */

    mask = 0;
    for (portnum = 0; portnum < MUSYCC_NPORTS; portnum++)
    {
        comet = ci->port[portnum].cometbase;
        pci_write_32 ((u_int32_t *) &comet->mdiag, wdata);
        rdata = pci_read_32 ((u_int32_t *) &comet->mdiag) & COMET_MDIAG_LBMASK;
        if (wdata == rdata)
            mask |= 1 << portnum;
    }
    return mask;
}


/* nothing herein should generate interrupts */

status_t    __init
c4_init (ci_t * ci, u_char *func0, u_char *func1)
{
    mpi_t      *pi;
    mch_t      *ch;
    static u_int32_t count = 0;
    int         portnum, j;

    ci->state = C_INIT;
    ci->brdno = count++;
    ci->intlog.this_status_new = 0;
    atomic_set (&ci->bh_pending, 0);

    ci->reg = (struct musycc_globalr *) func0;
    ci->eeprombase = (u_int32_t *) (func1 + EEPROM_OFFSET);
    ci->cpldbase = (c4cpld_t *) ((u_int32_t *) (func1 + ISPLD_OFFSET));

    /*** PORT POINT - the following is the first access of any type to the hardware ***/
#ifdef CONFIG_SBE_PMCC4_NCOMM
    /* NCOMM driver uses INTB interrupt to monitor CPLD register */
    pci_write_32 ((u_int32_t *) &ci->reg->glcd, GCD_MAGIC);
#else
    /* standard driver POLLS for INTB via CPLD register */
    pci_write_32 ((u_int32_t *) &ci->reg->glcd, GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
#endif

    {
        int         pmsk;

        /* need comet addresses available for determination of hardware build */
        for (portnum = 0; portnum < MUSYCC_NPORTS; portnum++)
        {
            pi = &ci->port[portnum];
            pi->cometbase = (comet_t *) ((u_int32_t *) (func1 + COMET_OFFSET (portnum)));
            pi->reg = (struct musycc_globalr *) ((u_char *) ci->reg + (portnum * 0x800));
            pi->portnum = portnum;
            pi->p.portnum = portnum;
            pi->openchans = 0;
#ifdef SBE_MAP_DEBUG
            pr_info("Comet-%d: addr = %p\n", portnum, pi->cometbase);
#endif
        }
        pmsk = c4_get_portcfg (ci);
        switch (pmsk)
        {
        case 0x1:
            ci->max_port = 1;
            break;
        case 0x3:
            ci->max_port = 2;
            break;
#if 0
        case 0x7:                   /* not built, but could be... */
            ci->max_port = 3;
            break;
#endif
        case 0xf:
            ci->max_port = 4;
            break;
        default:
            ci->max_port = 0;
            pr_warning("%s: illegal port configuration (%x)\n",
                       ci->devname, pmsk);
            return SBE_DRVR_FAIL;
        }
#ifdef SBE_MAP_DEBUG
        pr_info(">> %s: c4_get_build - pmsk %x max_port %x\n",
                ci->devname, pmsk, ci->max_port);
#endif
    }

    for (portnum = 0; portnum < ci->max_port; portnum++)
    {
        pi = &ci->port[portnum];
        pi->up = ci;
        pi->sr_last = 0xffffffff;
        pi->p.port_mode = CFG_FRAME_SF; /* T1 B8ZS, the default */
        pi->p.portP = (CFG_CLK_PORT_EXTERNAL | CFG_LBO_LH0);    /* T1 defaults */

        OS_sem_init (&pi->sr_sem_busy, SEM_AVAILABLE);
        OS_sem_init (&pi->sr_sem_wait, SEM_TAKEN);

        for (j = 0; j < 32; j++)
        {
            pi->fifomap[j] = -1;
            pi->tsm[j] = 0;         /* no assignments, all available */
        }

        /* allocate channel structures for this port */
        for (j = 0; j < MUSYCC_NCHANS; j++)
        {
            ch = OS_kmalloc (sizeof (mch_t));
            if (ch)
            {
                pi->chan[j] = ch;
                ch->state = UNASSIGNED;
                ch->up = pi;
                ch->gchan = (-1);   /* channel assignment not yet known */
                ch->channum = (-1); /* channel assignment not yet known */
                ch->p.card = ci->brdno;
                ch->p.port = portnum;
                ch->p.channum = (-1);   /* channel assignment not yet known */
                ch->p.mode_56k = 0; /* default is 64kbps mode */
            } else
            {
                pr_warning("failed mch_t malloc, port %d channel %d size %u.\n",
                           portnum, j, (unsigned int) sizeof (mch_t));
                break;
            }
        }
    }


    {
        /*
         * Set LEDs through their paces to supply visual proof that LEDs are
         * functional and not burnt out nor broken.
         *
         * YELLOW + GREEN -> OFF.
         */

        pci_write_32 ((u_int32_t *) &ci->cpldbase->leds,
                      PMCC4_CPLD_LED_GREEN | PMCC4_CPLD_LED_YELLOW);
        OS_uwait (750000, "leds");
        pci_write_32 ((u_int32_t *) &ci->cpldbase->leds, PMCC4_CPLD_LED_OFF);
    }

    OS_init_watchdog (&ci->wd, (void (*) (void *)) c4_watchdog, ci, WATCHDOG_TIMEOUT);
    return SBE_DRVR_SUCCESS;
}


/* better be fully setup to handle interrupts when you call this */

status_t    __init
c4_init2 (ci_t * ci)
{
    status_t    ret;

    /* PORT POINT: this routine generates first interrupt */
    if ((ret = musycc_init (ci)) != SBE_DRVR_SUCCESS)
        return ret;

#if 0
    ci->p.framing_type = FRAMING_CBP;
    ci->p.h110enable = 1;
#if 0
    ci->p.hypersize = 0;
#else
    hyperdummy = 0;
#endif
    ci->p.clock = 0;                /* Use internal clocking until set to
                                     * external */
    c4_card_set_params (ci, &ci->p);
#endif
    OS_start_watchdog (&ci->wd);
    return SBE_DRVR_SUCCESS;
}


/* This function sets the loopback mode (or clears it, as the case may be). */

int
c4_loop_port (ci_t * ci, int portnum, u_int8_t cmd)
{
    comet_t    *comet;
    volatile u_int32_t loopValue;

    comet = ci->port[portnum].cometbase;
    loopValue = pci_read_32 ((u_int32_t *) &comet->mdiag) & COMET_MDIAG_LBMASK;

    if (cmd & COMET_LBCMD_READ)
        return loopValue;           /* return the read value */

    if (loopValue != cmd)
    {
        switch (cmd)
        {
        case COMET_MDIAG_LINELB:
            /* set(SF)loopback down (turn off) code length to 6 bits */
            pci_write_32 ((u_int32_t *) &comet->ibcd_cfg, 0x05);
            break;
        case COMET_MDIAG_LBOFF:
            /* set (SF) loopback up (turn on) code length to 5 bits */
            pci_write_32 ((u_int32_t *) &comet->ibcd_cfg, 0x00);
            break;
        }

        pci_write_32 ((u_int32_t *) &comet->mdiag, cmd);
        if (log_level >= LOG_WARN)
            pr_info("%s: loopback mode changed to %2x from %2x on Port %d\n",
                    ci->devname, cmd, loopValue, portnum);
        loopValue = pci_read_32 ((u_int32_t *) &comet->mdiag) & COMET_MDIAG_LBMASK;
        if (loopValue != cmd)
        {
            if (log_level >= LOG_ERROR)
                pr_info("%s: write to loop register failed, unknown state for Port %d\n",
                        ci->devname, portnum);
        }
    } else
    {
        if (log_level >= LOG_WARN)
            pr_info("%s: loopback already in that mode (%2x)\n",
                    ci->devname, loopValue);
    }
    return 0;
}


/* c4_frame_rw: read or write the comet register specified
 * (modifies use of port_param to non-standard use of struct)
 * Specifically:
 *   pp.portnum     (one guess)
 *   pp.port_mode   offset of register
 *   pp.portP       write (or not, i.e. read)
 *   pp.portStatus  write value
 * BTW:
 *   pp.portStatus  also used to return read value
 *   pp.portP       also used during write, to return old reg value
 */

status_t
c4_frame_rw (ci_t * ci, struct sbecom_port_param * pp)
{
    comet_t    *comet;
    volatile u_int32_t data;

    if (pp->portnum >= ci->max_port)/* sanity check */
        return ENXIO;

    comet = ci->port[pp->portnum].cometbase;
    data = pci_read_32 ((u_int32_t *) comet + pp->port_mode) & 0xff;

    if (pp->portP)
    {                               /* control says this is a register
                                     * _write_ */
        if (pp->portStatus == data)
            pr_info("%s: Port %d already that value!  Writing again anyhow.\n",
                    ci->devname, pp->portnum);
        pp->portP = (u_int8_t) data;
        pci_write_32 ((u_int32_t *) comet + pp->port_mode,
                      pp->portStatus);
        data = pci_read_32 ((u_int32_t *) comet + pp->port_mode) & 0xff;
    }
    pp->portStatus = (u_int8_t) data;
    return 0;
}


/* c4_pld_rw: read or write the pld register specified
 * (modifies use of port_param to non-standard use of struct)
 * Specifically:
 *   pp.port_mode   offset of register
 *   pp.portP       write (or not, i.e. read)
 *   pp.portStatus  write value
 * BTW:
 *   pp.portStatus  also used to return read value
 *   pp.portP       also used during write, to return old reg value
 */

status_t
c4_pld_rw (ci_t * ci, struct sbecom_port_param * pp)
{
    volatile u_int32_t *regaddr;
    volatile u_int32_t data;
    int         regnum = pp->port_mode;

    regaddr = (u_int32_t *) ci->cpldbase + regnum;
    data = pci_read_32 ((u_int32_t *) regaddr) & 0xff;

    if (pp->portP)
    {                               /* control says this is a register
                                     * _write_ */
        pp->portP = (u_int8_t) data;
        pci_write_32 ((u_int32_t *) regaddr, pp->portStatus);
        data = pci_read_32 ((u_int32_t *) regaddr) & 0xff;
    }
    pp->portStatus = (u_int8_t) data;
    return 0;
}

/* c4_musycc_rw: read or write the musycc register specified
 * (modifies use of port_param to non-standard use of struct)
 * Specifically:
 *    mcp.RWportnum   port number and write indication bit (0x80)
 *    mcp.offset      offset of register
 *    mcp.value       write value going in and read value returning
 */

/* PORT POINT: TX Subchannel Map registers are write-only
 * areas within the MUSYCC and always return FF */
/* PORT POINT: regram and reg structures are minorly different and <offset> ioctl
 * settings are aligned with the <reg> struct musycc_globalr{} usage.
 * Also, regram is separately allocated shared memory, allocated for each port.
 * PORT POINT: access offsets of 0x6000 for Msg Cfg Desc Tbl are for 4-port MUSYCC
 * only.  (An 8-port MUSYCC has 0x16000 offsets for accessing its upper 4 tables.)
 */

status_t
c4_musycc_rw (ci_t * ci, struct c4_musycc_param * mcp)
{
    mpi_t      *pi;
    volatile u_int32_t *dph;    /* hardware implemented register */
    u_int32_t  *dpr = 0;        /* RAM image of registers for group command
                                 * usage */
    int         offset = mcp->offset % 0x800;   /* group relative address
                                                 * offset, mcp->portnum is
                                                 * not used */
    int         portnum, ramread = 0;
    volatile u_int32_t data;

    /*
     * Sanity check hardware accessibility.  The 0x6000 portion handles port
     * numbers associated with Msg Descr Tbl decoding.
     */
    portnum = (mcp->offset % 0x6000) / 0x800;
    if (portnum >= ci->max_port)
        return ENXIO;
    pi = &ci->port[portnum];
    if (mcp->offset >= 0x6000)
        offset += 0x6000;           /* put back in MsgCfgDesc address offset */
    dph = (u_int32_t *) ((u_long) pi->reg + offset);

    /* read of TX are from RAM image, since hardware returns FF */
    dpr = (u_int32_t *) ((u_long) pi->regram + offset);
    if (mcp->offset < 0x6000)       /* non MsgDesc Tbl accesses might require
                                     * RAM access */
    {
        if (offset >= 0x200 && offset < 0x380)
            ramread = 1;
        if (offset >= 0x10 && offset < 0x200)
            ramread = 1;
    }
    /* read register from RAM or hardware, depending... */
    if (ramread)
    {
        data = *dpr;
        //pr_info("c4_musycc_rw: RAM addr %p  read data %x (portno %x offset %x RAM ramread %x)\n", dpr, data, portnum, offset, ramread); /* RLD DEBUG */
    } else
    {
        data = pci_read_32 ((u_int32_t *) dph);
        //pr_info("c4_musycc_rw: REG addr %p  read data %x (portno %x offset %x RAM ramread %x)\n", dph, data, portnum, offset, ramread); /* RLD DEBUG */
    }


    if (mcp->RWportnum & 0x80)
    {                               /* control says this is a register
                                     * _write_ */
        if (mcp->value == data)
            pr_info("%s: musycc grp%d already that value! writing again anyhow.\n",
                    ci->devname, (mcp->RWportnum & 0x7));
        /* write register RAM */
        if (ramread)
            *dpr = mcp->value;
        /* write hardware register */
        pci_write_32 ((u_int32_t *) dph, mcp->value);
    }
    mcp->value = data;              /* return the read value (or the 'old
                                     * value', if is write) */
    return 0;
}

status_t
c4_get_port (ci_t * ci, int portnum)
{
    if (portnum >= ci->max_port)    /* sanity check */
        return ENXIO;

    SD_SEM_TAKE (&ci->sem_wdbusy, "_wd_");      /* only 1 thru here, per
                                                 * board */
    checkPorts (ci);
    ci->port[portnum].p.portStatus = (u_int8_t) ci->alarmed[portnum];
    ci->alarmed[portnum] &= 0xdf;
    SD_SEM_GIVE (&ci->sem_wdbusy);  /* release per-board hold */
    return 0;
}

status_t
c4_set_port (ci_t * ci, int portnum)
{
    mpi_t      *pi;
    struct sbecom_port_param *pp;
    int         e1mode;
    u_int8_t    clck;
    int         i;

    if (portnum >= ci->max_port)    /* sanity check */
        return ENXIO;

    pi = &ci->port[portnum];
    pp = &ci->port[portnum].p;
    e1mode = IS_FRAME_ANY_E1 (pp->port_mode);
    if (log_level >= LOG_MONITOR2)
    {
        pr_info("%s: c4_set_port[%d]:  entered, e1mode = %x, openchans %d.\n",
                ci->devname,
                portnum, e1mode, pi->openchans);
    }
    if (pi->openchans)
        return EBUSY;               /* group needs initialization only for
                                     * first channel of a group */

    {
        status_t    ret;

        if ((ret = c4_wq_port_init (pi)))       /* create/init
                                                 * workqueue_struct */
            return (ret);
    }

    init_comet (ci, pi->cometbase, pp->port_mode, 1 /* clockmaster == true */ , pp->portP);
    clck = pci_read_32 ((u_int32_t *) &ci->cpldbase->mclk) & PMCC4_CPLD_MCLK_MASK;
    if (e1mode)
        clck |= 1 << portnum;
    else
        clck &= 0xf ^ (1 << portnum);

    pci_write_32 ((u_int32_t *) &ci->cpldbase->mclk, clck);
    pci_write_32 ((u_int32_t *) &ci->cpldbase->mcsr, PMCC4_CPLD_MCSR_IND);
    pci_write_32 ((u_int32_t *) &pi->reg->gbp, OS_vtophys (pi->regram));

    /*********************************************************************/
    /* ERRATA: If transparent mode is used, do not set OOFMP_DISABLE bit */
    /*********************************************************************/

    pi->regram->grcd =
        __constant_cpu_to_le32 (MUSYCC_GRCD_RX_ENABLE |
                                MUSYCC_GRCD_TX_ENABLE |
                                MUSYCC_GRCD_OOFMP_DISABLE |
                                MUSYCC_GRCD_SF_ALIGN |  /* per MUSYCC ERRATA,
                                                         * for T1 * fix */
                                MUSYCC_GRCD_COFAIRQ_DISABLE |
                                MUSYCC_GRCD_MC_ENABLE |
                       (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));

    pi->regram->pcd =
        __constant_cpu_to_le32 ((e1mode ? 1 : 0) |
                                MUSYCC_PCD_TXSYNC_RISING |
                                MUSYCC_PCD_RXSYNC_RISING |
                                MUSYCC_PCD_RXDATA_RISING);

    /* Message length descriptor */
       pi->regram->mld = __constant_cpu_to_le32 (cxt1e1_max_mru | (cxt1e1_max_mru << 16));

    /* tsm algorithm */
    for (i = 0; i < 32; i++)
    {

        /*** ASSIGNMENT NOTES:                             ***/
        /*** Group's channel  ZERO  unavailable if E1.     ***/
        /*** Group's channel  16    unavailable if E1 CAS. ***/
        /*** Group's channels 24-31 unavailable if T1.     ***/

        if (((i == 0) && e1mode) ||
            ((i == 16) && ((pp->port_mode == CFG_FRAME_E1CRC_CAS) || (pp->port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
            || ((i > 23) && (!e1mode)))
        {
            pi->tsm[i] = 0xff;      /* make tslot unavailable for this mode */
        } else
        {
            pi->tsm[i] = 0x00;      /* make tslot available for assignment */
        }
    }
    for (i = 0; i < MUSYCC_NCHANS; i++)
    {
        pi->regram->ttsm[i] = 0;
        pi->regram->rtsm[i] = 0;
    }
    FLUSH_MEM_WRITE ();
    musycc_serv_req (pi, SR_GROUP_INIT | SR_RX_DIRECTION);
    musycc_serv_req (pi, SR_GROUP_INIT | SR_TX_DIRECTION);

    musycc_init_mdt (pi);

    pi->group_is_set = 1;
    pi->p = *pp;
    return 0;
}


unsigned int max_int = 0;

status_t
c4_new_chan (ci_t * ci, int portnum, int channum, void *user)
{
    mpi_t      *pi;
    mch_t      *ch;
    int         gchan;

    if (c4_find_chan (channum))     /* a new channel shouldn't already exist */
        return EEXIST;

    if (portnum >= ci->max_port)    /* sanity check */
        return ENXIO;

    pi = &(ci->port[portnum]);
    /* find any available channel within this port */
    for (gchan = 0; gchan < MUSYCC_NCHANS; gchan++)
    {
        ch = pi->chan[gchan];
        if (ch && ch->state == UNASSIGNED)      /* no assignment is good! */
            break;
    }
    if (gchan == MUSYCC_NCHANS)     /* exhausted table, all were assigned */
        return ENFILE;

    ch->up = pi;

    /* NOTE: mch_t already cleared during OS_kmalloc() */
    ch->state = DOWN;
    ch->user = user;
    ch->gchan = gchan;
    ch->channum = channum;          /* mark our channel assignment */
    ch->p.channum = channum;
#if 1
    ch->p.card = ci->brdno;
    ch->p.port = portnum;
#endif
    ch->p.chan_mode = CFG_CH_PROTO_HDLC_FCS16;
    ch->p.idlecode = CFG_CH_FLAG_7E;
    ch->p.pad_fill_count = 2;
    spin_lock_init (&ch->ch_rxlock);
    spin_lock_init (&ch->ch_txlock);

    {
        status_t    ret;

        if ((ret = c4_wk_chan_init (pi, ch)))
            return ret;
    }

    /* save off interface assignments which bound a board */
    if (ci->first_if == 0)          /* first channel registered is assumed to
                                     * be the lowest channel */
    {
        ci->first_if = ci->last_if = user;
        ci->first_channum = ci->last_channum = channum;
    } else
    {
        ci->last_if = user;
        if (ci->last_channum < channum) /* higher number channel found */
            ci->last_channum = channum;
    }
    return 0;
}

status_t
c4_del_chan (int channum)
{
    mch_t      *ch;

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;
    if (ch->state == UP)
        musycc_chan_down ((ci_t *) 0, channum);
    ch->state = UNASSIGNED;
    ch->gchan = (-1);
    ch->channum = (-1);
    ch->p.channum = (-1);
    return 0;
}

status_t
c4_del_chan_stats (int channum)
{
    mch_t      *ch;

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;

    memset (&ch->s, 0, sizeof (struct sbecom_chan_stats));
    return 0;
}


status_t
c4_set_chan (int channum, struct sbecom_chan_param * p)
{
    mch_t      *ch;
    int         i, x = 0;

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;

#if 1
    if (ch->p.card != p->card ||
        ch->p.port != p->port ||
        ch->p.channum != p->channum)
        return EINVAL;
#endif

    if (!(ch->up->group_is_set))
    {
        return EIO;                 /* out of order, SET_PORT command
                                     * required prior to first group's
                                     * SET_CHAN command */
    }
    /*
     * Check for change of parameter settings in order to invoke closing of
     * channel prior to hardware poking.
     */

    if (ch->p.status != p->status || ch->p.chan_mode != p->chan_mode ||
        ch->p.data_inv != p->data_inv || ch->p.intr_mask != p->intr_mask ||
        ch->txd_free < ch->txd_num) /* to clear out queued messages */
        x = 1;                      /* we have a change requested */
    for (i = 0; i < 32; i++)        /* check for timeslot mapping changes */
        if (ch->p.bitmask[i] != p->bitmask[i])
            x = 1;                  /* we have a change requested */
    ch->p = *p;
    if (x && (ch->state == UP))     /* if change request and channel is
                                     * open... */
    {
        status_t    ret;

        if ((ret = musycc_chan_down ((ci_t *) 0, channum)))
            return ret;
        if ((ret = c4_chan_up (ch->up->up, channum)))
            return ret;
        sd_enable_xmit (ch->user);  /* re-enable to catch flow controlled
                                     * channel */
    }
    return 0;
}


status_t
c4_get_chan (int channum, struct sbecom_chan_param * p)
{
    mch_t      *ch;

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;
    *p = ch->p;
    return 0;
}

status_t
c4_get_chan_stats (int channum, struct sbecom_chan_stats * p)
{
    mch_t      *ch;

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;
    *p = ch->s;
    p->tx_pending = atomic_read (&ch->tx_pending);
    return 0;
}

STATIC int
c4_fifo_alloc (mpi_t * pi, int chan, int *len)
{
    int         i, l = 0, start = 0, max = 0, maxstart = 0;

    for (i = 0; i < 32; i++)
    {
        if (pi->fifomap[i] != -1)
        {
            l = 0;
            start = i + 1;
            continue;
        }
        ++l;
        if (l > max)
        {
            max = l;
            maxstart = start;
        }
        if (max == *len)
            break;
    }
    if (max != *len)
    {
        if (log_level >= LOG_WARN)
            pr_info("%s: wanted to allocate %d fifo space, but got only %d\n",
                    pi->up->devname, *len, max);
        *len = max;
    }
    if (log_level >= LOG_DEBUG)
        pr_info("%s: allocated %d fifo at %d for channel %d/%d\n",
                pi->up->devname, max, start, chan, pi->p.portnum);
    for (i = maxstart; i < (maxstart + max); i++)
        pi->fifomap[i] = chan;
    return start;
}

void
c4_fifo_free (mpi_t * pi, int chan)
{
    int         i;

    if (log_level >= LOG_DEBUG)
        pr_info("%s: deallocated fifo for channel %d/%d\n",
                pi->up->devname, chan, pi->p.portnum);
    for (i = 0; i < 32; i++)
        if (pi->fifomap[i] == chan)
            pi->fifomap[i] = -1;
}


status_t
c4_chan_up (ci_t * ci, int channum)
{
    mpi_t      *pi;
    mch_t      *ch;
    struct mbuf *m;
    struct mdesc *md;
    int         nts, nbuf, txnum, rxnum;
    int         addr, i, j, gchan;
    u_int32_t   tmp;            /* for optimizing conversion across BE
                                 * platform */

    if (!(ch = c4_find_chan (channum)))
        return ENOENT;
    if (ch->state == UP)
    {
        if (log_level >= LOG_MONITOR)
            pr_info("%s: channel already UP, graceful early exit\n",
                    ci->devname);
        return 0;
    }
    pi = ch->up;
    gchan = ch->gchan;
    /* find nts ('number of timeslots') */
    nts = 0;
    for (i = 0; i < 32; i++)
    {
        if (ch->p.bitmask[i] & pi->tsm[i])
        {
            if (1 || log_level >= LOG_WARN)
            {
                pr_info("%s: c4_chan_up[%d] EINVAL (attempt to cfg in-use or unavailable TimeSlot[%d])\n",
                        ci->devname, channum, i);
                pr_info("+ ask4 %x, currently %x\n",
                        ch->p.bitmask[i], pi->tsm[i]);
            }
            return EINVAL;
        }
        for (j = 0; j < 8; j++)
            if (ch->p.bitmask[i] & (1 << j))
                nts++;
    }

    nbuf = nts / 8 ? nts / 8 : 1;
    if (!nbuf)
    {
        /* if( log_level >= LOG_WARN)  */
        pr_info("%s: c4_chan_up[%d] ENOBUFS (no TimeSlots assigned)\n",
                ci->devname, channum);
        return ENOBUFS;             /* this should not happen */
    }
    addr = c4_fifo_alloc (pi, gchan, &nbuf);
    ch->state = UP;

    /* Setup the Time Slot Map */
    musycc_update_timeslots (pi);

    /* ch->tx_limit = nts; */
    ch->s.tx_pending = 0;

    /* Set Channel Configuration Descriptors */
    {
        u_int32_t   ccd;

        ccd = musycc_chan_proto (ch->p.chan_mode) << MUSYCC_CCD_PROTO_SHIFT;
        if ((ch->p.chan_mode == CFG_CH_PROTO_ISLP_MODE) ||
            (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
        {
            ccd |= MUSYCC_CCD_FCS_XFER; /* Non FSC Mode */
        }
        ccd |= 2 << MUSYCC_CCD_MAX_LENGTH;      /* Select second MTU */
        ccd |= ch->p.intr_mask;
        ccd |= addr << MUSYCC_CCD_BUFFER_LOC;
        if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
            ccd |= (nbuf) << MUSYCC_CCD_BUFFER_LENGTH;
        else
            ccd |= (nbuf - 1) << MUSYCC_CCD_BUFFER_LENGTH;

        if (ch->p.data_inv & CFG_CH_DINV_TX)
            ccd |= MUSYCC_CCD_INVERT_DATA;      /* Invert data */
        pi->regram->tcct[gchan] = cpu_to_le32 (ccd);

        if (ch->p.data_inv & CFG_CH_DINV_RX)
            ccd |= MUSYCC_CCD_INVERT_DATA;      /* Invert data */
        else
            ccd &= ~MUSYCC_CCD_INVERT_DATA;     /* take away data inversion */
        pi->regram->rcct[gchan] = cpu_to_le32 (ccd);
        FLUSH_MEM_WRITE ();
    }

    /* Reread the Channel Configuration Descriptor for this channel */
    musycc_serv_req (pi, SR_CHANNEL_CONFIG | SR_RX_DIRECTION | gchan);
    musycc_serv_req (pi, SR_CHANNEL_CONFIG | SR_TX_DIRECTION | gchan);

    /*
     * Figure out how many buffers we want.  If the customer has changed from
     * the defaults, then use the changed values.  Otherwise, use Transparent
     * mode's specific minimum default settings.
     */
    if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
    {
        if (max_rxdesc_used == max_rxdesc_default)      /* use default setting */
            max_rxdesc_used = MUSYCC_RXDESC_TRANS;
        if (max_txdesc_used == max_txdesc_default)      /* use default setting */
            max_txdesc_used = MUSYCC_TXDESC_TRANS;
    }
    /*
     * Increase counts when hyperchanneling, since this implies an increase
     * in throughput per channel
     */
    rxnum = max_rxdesc_used + (nts / 4);
    txnum = max_txdesc_used + (nts / 4);

#if 0
    /* DEBUG INFO */
    if (log_level >= LOG_MONITOR)
        pr_info("%s: mode %x rxnum %d (rxused %d def %d) txnum %d (txused %d def %d)\n",
                ci->devname, ch->p.chan_mode,
                rxnum, max_rxdesc_used, max_rxdesc_default,
                txnum, max_txdesc_used, max_txdesc_default);
#endif

    ch->rxd_num = rxnum;
    ch->txd_num = txnum;
    ch->rxix_irq_srv = 0;

    ch->mdr = OS_kmalloc (sizeof (struct mdesc) * rxnum);
    ch->mdt = OS_kmalloc (sizeof (struct mdesc) * txnum);
    if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
               tmp = __constant_cpu_to_le32 (cxt1e1_max_mru | EOBIRQ_ENABLE);
    else
               tmp = __constant_cpu_to_le32 (cxt1e1_max_mru);

    for (i = 0, md = ch->mdr; i < rxnum; i++, md++)
    {
        if (i == (rxnum - 1))
        {
            md->snext = &ch->mdr[0];/* wrapness */
        } else
        {
            md->snext = &ch->mdr[i + 1];
        }
        md->next = cpu_to_le32 (OS_vtophys (md->snext));

               if (!(m = OS_mem_token_alloc (cxt1e1_max_mru)))
        {
            if (log_level >= LOG_MONITOR)
                pr_info("%s: c4_chan_up[%d] - token alloc failure, size = %d.\n",
                                               ci->devname, channum, cxt1e1_max_mru);
            goto errfree;
        }
        md->mem_token = m;
        md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m)));
        md->status = tmp | MUSYCC_RX_OWNED;     /* MUSYCC owns RX descriptor **
                                                 * CODING NOTE:
                                                 * MUSYCC_RX_OWNED = 0 so no
                                                 * need to byteSwap */
    }

    for (i = 0, md = ch->mdt; i < txnum; i++, md++)
    {
        md->status = HOST_TX_OWNED; /* Host owns TX descriptor ** CODING
                                     * NOTE: HOST_TX_OWNED = 0 so no need to
                                     * byteSwap */
        md->mem_token = 0;
        md->data = 0;
        if (i == (txnum - 1))
        {
            md->snext = &ch->mdt[0];/* wrapness */
        } else
        {
            md->snext = &ch->mdt[i + 1];
        }
        md->next = cpu_to_le32 (OS_vtophys (md->snext));
    }
    ch->txd_irq_srv = ch->txd_usr_add = &ch->mdt[0];
    ch->txd_free = txnum;
    ch->tx_full = 0;
    ch->txd_required = 0;

    /* Configure it into the chip */
    tmp = cpu_to_le32 (OS_vtophys (&ch->mdt[0]));
    pi->regram->thp[gchan] = tmp;
    pi->regram->tmp[gchan] = tmp;

    tmp = cpu_to_le32 (OS_vtophys (&ch->mdr[0]));
    pi->regram->rhp[gchan] = tmp;
    pi->regram->rmp[gchan] = tmp;

    /* Activate the Channel */
    FLUSH_MEM_WRITE ();
    if (ch->p.status & RX_ENABLED)
    {
#ifdef RLD_TRANS_DEBUG
        pr_info("++ c4_chan_up() CHAN RX ACTIVATE: chan %d\n", ch->channum);
#endif
        ch->ch_start_rx = 0;        /* we are restarting RX... */
        musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | gchan);
    }
    if (ch->p.status & TX_ENABLED)
    {
#ifdef RLD_TRANS_DEBUG
        pr_info("++ c4_chan_up() CHAN TX ACTIVATE: chan %d <delayed>\n", ch->channum);
#endif
        ch->ch_start_tx = CH_START_TX_1ST;      /* we are delaying start
                                                 * until receipt from user of
                                                 * first packet to transmit. */
    }
    ch->status = ch->p.status;
    pi->openchans++;
    return 0;

errfree:
    while (i > 0)
    {
        /* Don't leak all the previously allocated mbufs in this loop */
        i--;
        OS_mem_token_free (ch->mdr[i].mem_token);
    }
    OS_kfree (ch->mdt);
    ch->mdt = 0;
    ch->txd_num = 0;
    OS_kfree (ch->mdr);
    ch->mdr = 0;
    ch->rxd_num = 0;
    ch->state = DOWN;
    return ENOBUFS;
}

/* stop the hardware from servicing & interrupting */

void
c4_stopwd (ci_t * ci)
{
    OS_stop_watchdog (&ci->wd);
    SD_SEM_TAKE (&ci->sem_wdbusy, "_stop_");    /* ensure WD not running */
    SD_SEM_GIVE (&ci->sem_wdbusy);
}


void
sbecom_get_brdinfo (ci_t * ci, struct sbe_brd_info * bip, u_int8_t *bsn)
{
    char       *np;
    u_int32_t   sn = 0;
    int         i;

    bip->brdno = ci->brdno;         /* our board number */
    bip->brd_id = ci->brd_id;
    bip->brd_hdw_id = ci->hdw_bid;
    bip->brd_chan_cnt = MUSYCC_NCHANS * ci->max_port;   /* number of channels
                                                         * being used */
    bip->brd_port_cnt = ci->max_port;   /* number of ports being used */
    bip->brd_pci_speed = BINFO_PCI_SPEED_unk;   /* PCI speed not yet
                                                 * determinable */

    if (ci->first_if)
    {
        {
            struct net_device *dev;

            dev = (struct net_device *) ci->first_if;
            np = (char *) dev->name;
        }
        strncpy (bip->first_iname, np, CHNM_STRLEN - 1);
    } else
        strcpy (bip->first_iname, "<NULL>");
    if (ci->last_if)
    {
        {
            struct net_device *dev;

            dev = (struct net_device *) ci->last_if;
            np = (char *) dev->name;
        }
        strncpy (bip->last_iname, np, CHNM_STRLEN - 1);
    } else
        strcpy (bip->last_iname, "<NULL>");

    if (bsn)
    {
        for (i = 0; i < 3; i++)
        {
            bip->brd_mac_addr[i] = *bsn++;
        }
        for (; i < 6; i++)
        {
            bip->brd_mac_addr[i] = *bsn;
            sn = (sn << 8) | *bsn++;
        }
    } else
    {
        for (i = 0; i < 6; i++)
            bip->brd_mac_addr[i] = 0;
    }
    bip->brd_sn = sn;
}


status_t
c4_get_iidinfo (ci_t * ci, struct sbe_iid_info * iip)
{
    struct net_device *dev;
    char       *np;

    if (!(dev = getuserbychan (iip->channum)))
        return ENOENT;

    np = dev->name;
    strncpy (iip->iname, np, CHNM_STRLEN - 1);
    return 0;
}


#ifdef CONFIG_SBE_PMCC4_NCOMM
void        (*nciInterrupt[MAX_BOARDS][4]) (void);
extern void wanpmcC4T1E1_hookInterrupt (int cardID, int deviceID, void *handler);

void
wanpmcC4T1E1_hookInterrupt (int cardID, int deviceID, void *handler)
{
    if (cardID < MAX_BOARDS)    /* sanity check */
        nciInterrupt[cardID][deviceID] = handler;
}

irqreturn_t
c4_ebus_intr_th_handler (void *devp)
{
    ci_t       *ci = (ci_t *) devp;
    volatile u_int32_t ists;
    int         handled = 0;
    int         brdno;

    /* which COMET caused the interrupt */
    brdno = ci->brdno;
    ists = pci_read_32 ((u_int32_t *) &ci->cpldbase->intr);
    if (ists & PMCC4_CPLD_INTR_CMT_1)
    {
        handled = 0x1;
        if (nciInterrupt[brdno][0] != NULL)
            (*nciInterrupt[brdno][0]) ();
    }
    if (ists & PMCC4_CPLD_INTR_CMT_2)
    {
        handled |= 0x2;
        if (nciInterrupt[brdno][1] != NULL)
            (*nciInterrupt[brdno][1]) ();
    }
    if (ists & PMCC4_CPLD_INTR_CMT_3)
    {
        handled |= 0x4;
        if (nciInterrupt[brdno][2] != NULL)
            (*nciInterrupt[brdno][2]) ();
    }
    if (ists & PMCC4_CPLD_INTR_CMT_4)
    {
        handled |= 0x8;
        if (nciInterrupt[brdno][3] != NULL)
            (*nciInterrupt[brdno][3]) ();
    }
#if 0
    /*** Test code just de-implements the asserted interrupt.  Alternate
    vendor will supply COMET interrupt handling code herein or such.
    ***/
    pci_write_32 ((u_int32_t *) &ci->reg->glcd, GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
#endif

    return IRQ_RETVAL (handled);
}


unsigned long
wanpmcC4T1E1_getBaseAddress (int cardID, int deviceID)
{
    ci_t       *ci;
    unsigned long base = 0;

    ci = c4_list;
    while (ci)
    {
        if (ci->brdno == cardID)    /* found valid device */
        {
            if (deviceID < ci->max_port)        /* comet is supported */
                base = ((unsigned long) ci->port[deviceID].cometbase);
            break;
        }
        ci = ci->next;              /* next board, if any */
    }
    return (base);
}

#endif                          /*** CONFIG_SBE_PMCC4_NCOMM ***/


/***  End-of-File  ***/