| /* | |
| * U-boot - Configuration file for BF609 EZ-Kit board | |
| */ | |
| #ifndef __CONFIG_BF609_EZKIT_H__ | |
| #define __CONFIG_BF609_EZKIT_H__ | |
| #include <asm/config-pre.h> | |
| /* | |
| * Processor Settings | |
| */ | |
| #define CONFIG_BFIN_CPU bf609-0.0 | |
| #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA | |
| /* For ez-board version 1.0, else undef this */ | |
| #define CONFIG_BFIN_BOARD_VERSION_1_0 | |
| /* | |
| * Clock Settings | |
| * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV | |
| * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV | |
| * SCLK0 = SCLK / SCLK0_DIV | |
| * SCLK1 = SCLK / SCLK1_DIV | |
| */ | |
| /* CONFIG_CLKIN_HZ is any value in Hz */ | |
| #define CONFIG_CLKIN_HZ (25000000) | |
| /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ | |
| /* 1 = CLKIN / 2 */ | |
| #define CONFIG_CLKIN_HALF (0) | |
| /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ | |
| /* Values can range from 0-127 (where 0 means 128) */ | |
| #define CONFIG_VCO_MULT (20) | |
| /* CCLK_DIV controls the core clock divider */ | |
| /* Values can range from 0-31 (where 0 means 32) */ | |
| #define CONFIG_CCLK_DIV (1) | |
| /* SCLK_DIV controls the system clock divider */ | |
| /* Values can range from 0-31 (where 0 means 32) */ | |
| #define CONFIG_SCLK_DIV (4) | |
| /* Values can range from 0-7 (where 0 means 8) */ | |
| #define CONFIG_SCLK0_DIV (1) | |
| #define CONFIG_SCLK1_DIV (1) | |
| /* DCLK_DIV controls the DDR clock divider */ | |
| /* Values can range from 0-31 (where 0 means 32) */ | |
| #define CONFIG_DCLK_DIV (2) | |
| /* OCLK_DIV controls the output clock divider */ | |
| /* Values can range from 0-127 (where 0 means 128) */ | |
| #define CONFIG_OCLK_DIV (16) | |
| /* | |
| * Memory Settings | |
| */ | |
| #define CONFIG_MEM_SIZE 128 | |
| #define CONFIG_SMC_GCTL_VAL 0x00000010 | |
| #define CONFIG_SMC_B0CTL_VAL 0x01007011 | |
| #define CONFIG_SMC_B0TIM_VAL 0x08170977 | |
| #define CONFIG_SMC_B0ETIM_VAL 0x00092231 | |
| #define CONFIG_SYS_MONITOR_LEN (768 * 1024) | |
| #define CONFIG_SYS_MALLOC_LEN (512 * 1024) | |
| #define CONFIG_HW_WATCHDOG | |
| /* | |
| * Network Settings | |
| */ | |
| #define ADI_CMDS_NETWORK | |
| #define CONFIG_NETCONSOLE | |
| #define CONFIG_NET_MULTI | |
| #define CONFIG_HOSTNAME "bf609-ezkit" | |
| #define CONFIG_DESIGNWARE_ETH | |
| #define CONFIG_PHY_ADDR 1 | |
| #define CONFIG_DW_PORTS 1 | |
| #define CONFIG_DW_ALTDESCRIPTOR | |
| #define CONFIG_CMD_NET | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_MII | |
| #define CONFIG_PHYLIB | |
| /* i2c Settings */ | |
| #define CONFIG_BFIN_TWI_I2C | |
| #define CONFIG_HARD_I2C | |
| /* | |
| * Flash Settings | |
| */ | |
| #undef CONFIG_CMD_IMLS | |
| #undef CONFIG_CMD_JFFS2 | |
| #define CONFIG_SYS_FLASH_CFI_WIDTH 2 | |
| #define CONFIG_FLASH_CFI_DRIVER | |
| #define CONFIG_SYS_FLASH_BASE 0xb0000000 | |
| #define CONFIG_SYS_FLASH_CFI | |
| #define CONFIG_SYS_FLASH_PROTECTION | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
| #define CONFIG_SYS_MAX_FLASH_SECT 131 | |
| #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS | |
| /* | |
| * SPI Settings | |
| */ | |
| #define CONFIG_BFIN_SPI6XX | |
| #define CONFIG_ENV_SPI_MAX_HZ 25000000 | |
| #define CONFIG_SF_DEFAULT_SPEED 25000000 | |
| #define CONFIG_SPI_FLASH | |
| #define CONFIG_SPI_FLASH_ALL | |
| /* | |
| * Env Storage Settings | |
| */ | |
| #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) | |
| #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| #define CONFIG_ENV_OFFSET 0x10000 | |
| #define CONFIG_ENV_SIZE 0x2000 | |
| #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| #define CONFIG_ENV_IS_EMBEDDED_IN_LDR | |
| #elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) | |
| #define CONFIG_ENV_IS_IN_NAND | |
| #define CONFIG_ENV_OFFSET 0x60000 | |
| #define CONFIG_ENV_SIZE 0x20000 | |
| #else | |
| #define CONFIG_ENV_IS_IN_FLASH | |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | |
| #define CONFIG_ENV_OFFSET 0x8000 | |
| #define CONFIG_ENV_SIZE 0x8000 | |
| #define CONFIG_ENV_SECT_SIZE 0x8000 | |
| #define CONFIG_ENV_IS_EMBEDDED_IN_LDR | |
| #endif | |
| #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" | |
| /* | |
| * SDH Settings | |
| */ | |
| #define CONFIG_GENERIC_MMC | |
| #define CONFIG_MMC | |
| #define CONFIG_BFIN_SDH | |
| /* | |
| * Misc Settings | |
| */ | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| #define CONFIG_UART_CONSOLE 0 | |
| #define CONFIG_CMD_MEMORY | |
| #define CONFIG_CMD_SOFTSWITCH | |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) | |
| #define CONFIG_BFIN_SOFT_SWITCH | |
| #define CONFIG_ADI_GPIO2 | |
| #if 0 | |
| #define CONFIG_UART_MEM 1024 | |
| #undef CONFIG_UART_CONSOLE | |
| #undef CONFIG_JTAG_CONSOLE | |
| #undef CONFIG_UART_CONSOLE_IS_JTAG | |
| #endif | |
| #define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) | |
| /* | |
| * Run core 1 from L1 SRAM start address when init uboot on core 0 | |
| */ | |
| /* #define CONFIG_CORE1_RUN 1 */ | |
| /* | |
| * Pull in common ADI header for remaining command/environment setup | |
| */ | |
| #include <configs/bfin_adi_common.h> | |
| #endif |