| /* |
| * Copyright (C) 2012-2014 Freescale Semiconductor, Inc. |
| * |
| * Configuration settings for the Freescale i.MX6Q SabreSD board. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __MX6QSABRESD_CONFIG_H |
| #define __MX6QSABRESD_CONFIG_H |
| |
| #include <asm/arch/imx-regs.h> |
| #include <asm/imx-common/gpio.h> |
| |
| #define CONFIG_MACH_TYPE 3980 |
| #define CONFIG_MXC_UART_BASE UART1_BASE |
| #define CONFIG_CONSOLE_DEV "ttymxc0" |
| #define CONFIG_MMCROOT "/dev/mmcblk2p2" /* SDHC3 */ |
| |
| #include "mx6sabre_common.h" |
| |
| /* USB Configs */ |
| #define CONFIG_CMD_USB |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_MX6 |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_USB_HOST_ETHER |
| #define CONFIG_USB_ETHER_ASIX |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_MXC_USB_FLAGS 0 |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ |
| |
| #define CONFIG_SYS_FSL_USDHC_NUM 3 |
| #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ |
| #define CONFIG_SYS_MMC_ENV_PART 0 /* user partition */ |
| |
| #ifdef CONFIG_SYS_USE_SPINOR |
| #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(4, 9)<<8)) |
| #endif |
| |
| /* |
| * imx6 q/dl/solo pcie would be failed to work properly in kernel, if |
| * the pcie module is iniialized/enumerated both in uboot and linux |
| * kernel. |
| * rootcause:imx6 q/dl/solo pcie don't have the reset mechanism. |
| * it is only be RESET by the POR. So, the pcie module only be |
| * initialized/enumerated once in one POR. |
| * Set to use pcie in kernel defaultly, mask the pcie config here. |
| * Remove the mask freely, if the uboot pcie functions, rather than |
| * the kernel's, are required. |
| */ |
| /* #define CONFIG_CMD_PCI */ |
| #ifdef CONFIG_CMD_PCI |
| #define CONFIG_PCI |
| #define CONFIG_PCI_PNP |
| #define CONFIG_PCI_SCAN_SHOW |
| #define CONFIG_PCIE_IMX |
| #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) |
| #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) |
| #endif |
| |
| /*#define CONFIG_SPLASH_SCREEN*/ |
| /*#define CONFIG_MXC_EPDC*/ |
| |
| /* |
| * SPLASH SCREEN Configs |
| */ |
| #if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_MXC_EPDC) |
| /* |
| * Framebuffer and LCD |
| */ |
| #define CONFIG_CMD_BMP |
| #define CONFIG_LCD |
| #define CONFIG_FB_BASE (CONFIG_SYS_TEXT_BASE + 0x300000) |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #undef LCD_TEST_PATTERN |
| /* #define CONFIG_SPLASH_IS_IN_MMC 1 */ |
| #define LCD_BPP LCD_MONOCHROME |
| /* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ |
| |
| #define CONFIG_WORKING_BUF_ADDR (CONFIG_SYS_TEXT_BASE + 0x100000) |
| #define CONFIG_WAVEFORM_BUF_ADDR (CONFIG_SYS_TEXT_BASE + 0x200000) |
| #define CONFIG_WAVEFORM_FILE_OFFSET 0x600000 |
| #define CONFIG_WAVEFORM_FILE_SIZE 0xF0A00 |
| #define CONFIG_WAVEFORM_FILE_IN_MMC |
| |
| #ifdef CONFIG_SPLASH_IS_IN_MMC |
| #define CONFIG_SPLASH_IMG_OFFSET 0x4c000 |
| #define CONFIG_SPLASH_IMG_SIZE 0x19000 |
| #endif |
| #endif /* CONFIG_SPLASH_SCREEN && CONFIG_MXC_EPDC */ |
| |
| #endif /* __MX6QSABRESD_CONFIG_H */ |
