Google Git
Sign in
nest-open-source / nest-learning-thermostat / 5.1.8 / netperf / refs/heads/master / . / netperf-2.4.5 / src / nettest_sdp.c
blob: 696fd3e7e30a02adcd3ea1bfe8a25084b4462a85 [file] [log] [blame]
#ifndef lint
char nettest_sdp[]="\
@(#)nettest_sdp.c (c) Copyright 2007 Hewlett-Packard Co. Version 2.4.4";
#else
#define DIRTY
#define WANT_HISTOGRAM
#define WANT_INTERVALS
#endif /* lint */
/****************************************************************/
/* */
/* nettest_sdp.c */
/* */
/* */
/* scan_sdp_args() get the sdp command line args */
/* */
/* the actual test routines... */
/* */
/* send_sdp_stream() perform a sdp stream test */
/* recv_sdp_stream() */
/* send_sdp_rr() perform a sdp request/response */
/* recv_sdp_rr() */
/* */
/* relies on create_data_socket in nettest_bsd.c */
/****************************************************************/
#if HAVE_CONFIG_H
# include <config.h>
#endif
#if defined(WANT_SDP)
#include <sys/types.h>
#include <fcntl.h>
#include <errno.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <time.h>
#ifdef NOSTDLIBH
#include <malloc.h>
#else /* NOSTDLIBH */
#include <stdlib.h>
#endif /* NOSTDLIBH */
#if !defined(__VMS)
#include <sys/ipc.h>
#endif /* !defined(__VMS) */
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <arpa/inet.h>
#include <netdb.h>
/* would seem that not all sdp.h files define a MSG_EOF, but that
MSG_EOF can be the same as MSG_FIN so lets work with that
assumption. initial find by Jon Pedersen. raj 2006-02-01 */
#ifndef MSG_EOF
#ifdef MSG_FIN
#define MSG_EOF MSG_FIN
#else
#error Must have either MSG_EOF or MSG_FIN defined
#endif
#endif
#include "netlib.h"
#include "netsh.h"
/* get some of the functions from nettest_bsd.c */
#include "nettest_bsd.h"
#include "nettest_sdp.h"
#ifdef WANT_HISTOGRAM
#ifdef __sgi
#include <sys/time.h>
#endif /* __sgi */
#include "hist.h"
#endif /* WANT_HISTOGRAM */
#ifdef WANT_FIRST_BURST
extern int first_burst_size;
#endif /* WANT_FIRST_BURST */
/* these variables are specific to SDP tests. declare */
/* them static to make them global only to this file. */
static int
msg_count = 0, /* number of messages to transmit on association */
non_block = 0, /* default to blocking sockets */
num_associations = 1; /* number of associations on the endpoint */
static int confidence_iteration;
static char local_cpu_method;
static char remote_cpu_method;
#ifdef WANT_HISTOGRAM
static struct timeval time_one;
static struct timeval time_two;
static HIST time_hist;
#endif /* WANT_HISTOGRAM */
char sdp_usage[] = "\n\
Usage: netperf [global options] -- [test options] \n\
\n\
SDP Sockets Test Options:\n\
-b number Send number requests at the start of _RR tests\n\
-D [L][,R] Set SDP_NODELAY locally and/or remotely\n\
-h Display this text\n\
-H name,fam Use name (or IP) and family as target of data connection\n\
-L name,fam Use name (or IP) and family as source of data connextion\n\
-m bytes Set the size of each sent message\n\
-M bytes Set the size of each received messages\n\
-P local[,remote] Set the local/remote port for the data socket\n\
-r req,[rsp] Set request/response sizes (_RR tests)\n\
-s send[,recv] Set local socket send/recv buffer sizes\n\
-S send[,recv] Set remote socket send/recv buffer sizes\n\
-V Enable copy avoidance if supported\n\
-4 Use AF_INET (eg IPv4) on both ends of the data conn\n\
-6 Use AF_INET6 (eg IPv6) on both ends of the data conn\n\
\n\
For those options taking two parms, at least one must be specified;\n\
specifying one value without a comma will set both parms to that\n\
value, specifying a value with a leading comma will set just the second\n\
parm, a value with a trailing comma will set just the first. To set\n\
each parm to unique values, specify both and separate them with a\n\
comma.\n";
/* This routine is intended to retrieve interesting aspects of sdp */
/* for the data connection. at first, it attempts to retrieve the */
/* maximum segment size. later, it might be modified to retrieve */
/* other information, but it must be information that can be */
/* retrieved quickly as it is called during the timing of the test. */
/* for that reason, a second routine may be created that can be */
/* called outside of the timing loop */
static
void
get_sdp_info(int socket, int * mss)
{
#ifdef TCP_MAXSEG
netperf_socklen_t sock_opt_len;
sock_opt_len = sizeof(netperf_socklen_t);
if (getsockopt(socket,
getprotobyname("tcp")->p_proto,
TCP_MAXSEG,
(char *)mss,
&sock_opt_len) == SOCKET_ERROR) {
fprintf(where,
"netperf: get_sdp_info: getsockopt TCP_MAXSEG: errno %d\n",
errno);
fflush(where);
*mss = -1;
}
#else
*mss = -1;
#endif /* TCP_MAXSEG */
}
void
send_sdp_stream(char remote_host[])
{
char *tput_title = "\
Recv Send Send \n\
Socket Socket Message Elapsed \n\
Size Size Size Time Throughput \n\
bytes bytes bytes secs. %s/sec \n\n";
char *tput_fmt_0 =
"%7.2f %s\n";
char *tput_fmt_1 =
"%6d %6d %6d %-6.2f %7.2f %s\n";
char *cpu_title = "\
Recv Send Send Utilization Service Demand\n\
Socket Socket Message Elapsed Send Recv Send Recv\n\
Size Size Size Time Throughput local remote local remote\n\
bytes bytes bytes secs. %-8.8s/s %% %c %% %c us/KB us/KB\n\n";
char *cpu_fmt_0 =
"%6.3f %c %s\n";
char *cpu_fmt_1 =
"%6d %6d %6d %-6.2f %7.2f %-6.2f %-6.2f %-6.3f %-6.3f %s\n";
char *ksink_fmt = "\n\
Alignment Offset %-8.8s %-8.8s Sends %-8.8s Recvs\n\
Local Remote Local Remote Xfered Per Per\n\
Send Recv Send Recv Send (avg) Recv (avg)\n\
%5d %5d %5d %5d %6.4g %6.2f %6d %6.2f %6d\n";
char *ksink_fmt2 = "\n\
Maximum\n\
Segment\n\
Size (bytes)\n\
%6d\n";
float elapsed_time;
/* what we want is to have a buffer space that is at least one */
/* send-size greater than our send window. this will insure that we */
/* are never trying to re-use a buffer that may still be in the hands */
/* of the transport. This buffer will be malloc'd after we have found */
/* the size of the local senc socket buffer. We will want to deal */
/* with alignment and offset concerns as well. */
struct ring_elt *send_ring;
int len;
unsigned int nummessages = 0;
SOCKET send_socket;
int bytes_remaining;
int sdp_mss = -1; /* possibly uninitialized on printf far below */
/* with links like fddi, one can send > 32 bits worth of bytes */
/* during a test... ;-) at some point, this should probably become a */
/* 64bit integral type, but those are not entirely common yet */
unsigned long long local_bytes_sent = 0;
double bytes_sent = 0.0;
float local_cpu_utilization;
float local_service_demand;
float remote_cpu_utilization;
float remote_service_demand;
double thruput;
struct addrinfo *remote_res;
struct addrinfo *local_res;
struct sdp_stream_request_struct *sdp_stream_request;
struct sdp_stream_response_struct *sdp_stream_response;
struct sdp_stream_results_struct *sdp_stream_result;
sdp_stream_request =
(struct sdp_stream_request_struct *)netperf_request.content.test_specific_data;
sdp_stream_response =
(struct sdp_stream_response_struct *)netperf_response.content.test_specific_data;
sdp_stream_result =
(struct sdp_stream_results_struct *)netperf_response.content.test_specific_data;
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
time_hist = HIST_new();
}
#endif /* WANT_HISTOGRAM */
/* since we are now disconnected from the code that established the */
/* control socket, and since we want to be able to use different */
/* protocols and such, we are passed the name of the remote host and */
/* must turn that into the test specific addressing information. */
/* complete_addrinfos will either succede or exit the process */
complete_addrinfos(&remote_res,
&local_res,
remote_host,
SOCK_STREAM,
IPPROTO_TCP,
0);
if ( print_headers ) {
print_top_test_header("SDP STREAM TEST",local_res,remote_res);
}
send_ring = NULL;
confidence_iteration = 1;
init_stat();
/* we have a great-big while loop which controls the number of times */
/* we run a particular test. this is for the calculation of a */
/* confidence interval (I really should have stayed awake during */
/* probstats :). If the user did not request confidence measurement */
/* (no confidence is the default) then we will only go though the */
/* loop once. the confidence stuff originates from the folks at IBM */
while (((confidence < 0) && (confidence_iteration < iteration_max)) ||
(confidence_iteration <= iteration_min)) {
/* initialize a few counters. we have to remember that we might be */
/* going through the loop more than once. */
nummessages = 0;
bytes_sent = 0.0;
times_up = 0;
/*set up the data socket */
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
send_socket = create_data_socket(local_res);
if (send_socket == INVALID_SOCKET){
perror("netperf: send_sdp_stream: sdp stream data socket");
exit(1);
}
if (debug) {
fprintf(where,"send_sdp_stream: send_socket obtained...\n");
}
/* at this point, we have either retrieved the socket buffer sizes, */
/* or have tried to set them, so now, we may want to set the send */
/* size based on that (because the user either did not use a -m */
/* option, or used one with an argument of 0). If the socket buffer */
/* size is not available, we will set the send size to 4KB - no */
/* particular reason, just arbitrary... */
if (send_size == 0) {
if (lss_size > 0) {
send_size = lss_size;
}
else {
send_size = 4096;
}
}
/* set-up the data buffer ring with the requested alignment and offset. */
/* note also that we have allocated a quantity */
/* of memory that is at least one send-size greater than our socket */
/* buffer size. We want to be sure that there are at least two */
/* buffers allocated - this can be a bit of a problem when the */
/* send_size is bigger than the socket size, so we must check... the */
/* user may have wanted to explicitly set the "width" of our send */
/* buffers, we should respect that wish... */
if (send_width == 0) {
send_width = (lss_size/send_size) + 1;
if (send_width == 1) send_width++;
}
if (send_ring == NULL) {
/* only allocate the send ring once. this is a networking test, */
/* not a memory allocation test. this way, we do not need a */
/* deallocate_buffer_ring() routine, and I don't feel like */
/* writing one anyway :) raj 11/94 */
send_ring = allocate_buffer_ring(send_width,
send_size,
local_send_align,
local_send_offset);
}
/* If the user has requested cpu utilization measurements, we must */
/* calibrate the cpu(s). We will perform this task within the tests */
/* themselves. If the user has specified the cpu rate, then */
/* calibrate_local_cpu will return rather quickly as it will have */
/* nothing to do. If local_cpu_rate is zero, then we will go through */
/* all the "normal" calibration stuff and return the rate back. */
if (local_cpu_usage) {
local_cpu_rate = calibrate_local_cpu(local_cpu_rate);
}
if (!no_control) {
/* Tell the remote end to do a listen. The server alters the
socket paramters on the other side at this point, hence the
reason for all the values being passed in the setup
message. If the user did not specify any of the parameters,
they will be passed as 0, which will indicate to the remote
that no changes beyond the system's default should be
used. Alignment is the exception, it will default to 1, which
will be no alignment alterations. */
netperf_request.content.request_type = DO_SDP_STREAM;
sdp_stream_request->send_buf_size = rss_size_req;
sdp_stream_request->recv_buf_size = rsr_size_req;
sdp_stream_request->receive_size = recv_size;
sdp_stream_request->no_delay = rem_nodelay;
sdp_stream_request->recv_alignment = remote_recv_align;
sdp_stream_request->recv_offset = remote_recv_offset;
sdp_stream_request->measure_cpu = remote_cpu_usage;
sdp_stream_request->cpu_rate = remote_cpu_rate;
if (test_time) {
sdp_stream_request->test_length = test_time;
}
else {
sdp_stream_request->test_length = test_bytes;
}
sdp_stream_request->so_rcvavoid = rem_rcvavoid;
sdp_stream_request->so_sndavoid = rem_sndavoid;
#ifdef DIRTY
sdp_stream_request->dirty_count = rem_dirty_count;
sdp_stream_request->clean_count = rem_clean_count;
#endif /* DIRTY */
sdp_stream_request->port = atoi(remote_data_port);
sdp_stream_request->ipfamily = af_to_nf(remote_res->ai_family);
if (debug > 1) {
fprintf(where,
"netperf: send_sdp_stream: requesting SDP stream test\n");
}
send_request();
/* The response from the remote will contain all of the relevant
socket parameters for this test type. We will put them back
into the variables here so they can be displayed if desired.
The remote will have calibrated CPU if necessary, and will
have done all the needed set-up we will have calibrated the
cpu locally before sending the request, and will grab the
counter value right after the connect returns. The remote
will grab the counter right after the accept call. This saves
the hassle of extra messages being sent for the SDP
tests. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote listen done.\n");
rsr_size = sdp_stream_response->recv_buf_size;
rss_size = sdp_stream_response->send_buf_size;
rem_nodelay = sdp_stream_response->no_delay;
remote_cpu_usage= sdp_stream_response->measure_cpu;
remote_cpu_rate = sdp_stream_response->cpu_rate;
/* we have to make sure that the server port number is in
network order */
set_port_number(remote_res,
(short)sdp_stream_response->data_port_number);
rem_rcvavoid = sdp_stream_response->so_rcvavoid;
rem_sndavoid = sdp_stream_response->so_sndavoid;
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,
"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
}
#ifdef WANT_DEMO
DEMO_STREAM_SETUP(lss_size,rsr_size)
#endif
/*Connect up to the remote port on the data socket */
if (connect(send_socket,
remote_res->ai_addr,
remote_res->ai_addrlen) == INVALID_SOCKET){
perror("netperf: send_sdp_stream: data socket connect failed");
exit(1);
}
/* Data Socket set-up is finished. If there were problems, either */
/* the connect would have failed, or the previous response would */
/* have indicated a problem. I failed to see the value of the */
/* extra message after the accept on the remote. If it failed, */
/* we'll see it here. If it didn't, we might as well start pumping */
/* data. */
/* Set-up the test end conditions. For a stream test, they can be */
/* either time or byte-count based. */
if (test_time) {
/* The user wanted to end the test after a period of time. */
times_up = 0;
bytes_remaining = 0;
/* in previous revisions, we had the same code repeated throught */
/* all the test suites. this was unnecessary, and meant more */
/* work for me when I wanted to switch to POSIX signals, so I */
/* have abstracted this out into a routine in netlib.c. if you */
/* are experiencing signal problems, you might want to look */
/* there. raj 11/94 */
start_timer(test_time);
}
else {
/* The tester wanted to send a number of bytes. */
bytes_remaining = test_bytes;
times_up = 1;
}
/* The cpu_start routine will grab the current time and possibly */
/* value of the idle counter for later use in measuring cpu */
/* utilization and/or service demand and thruput. */
cpu_start(local_cpu_usage);
/* we only start the interval timer if we are using the
timer-timed intervals rather than the sit and spin ones. raj
2006-02-06 */
#if defined(WANT_INTERVALS)
INTERVALS_INIT();
#endif /* WANT_INTERVALS */
/* before we start, initialize a few variables */
#ifdef WANT_DEMO
if (demo_mode) {
HIST_timestamp(demo_one_ptr);
}
#endif
/* We use an "OR" to control test execution. When the test is */
/* controlled by time, the byte count check will always return false. */
/* When the test is controlled by byte count, the time test will */
/* always return false. When the test is finished, the whole */
/* expression will go false and we will stop sending data. */
while ((!times_up) || (bytes_remaining > 0)) {
#ifdef DIRTY
access_buffer(send_ring->buffer_ptr,
send_size,
loc_dirty_count,
loc_clean_count);
#endif /* DIRTY */
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* timestamp just before we go into send and then again just
after we come out raj 8/94 */
/* but lets only do this if there is going to be a histogram
displayed */
HIST_timestamp(&time_one);
}
#endif /* WANT_HISTOGRAM */
if((len=send(send_socket,
send_ring->buffer_ptr,
send_size,
0)) != send_size) {
if ((len >=0) || SOCKET_EINTR(len)) {
/* the test was interrupted, must be the end of test */
break;
}
perror("netperf: data send error");
printf("len was %d\n",len);
exit(1);
}
local_bytes_sent += send_size;
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* timestamp the exit from the send call and update the histogram */
HIST_timestamp(&time_two);
HIST_add(time_hist,delta_micro(&time_one,&time_two));
}
#endif /* WANT_HISTOGRAM */
#ifdef WANT_DEMO
DEMO_STREAM_INTERVAL(send_size)
#endif
#if defined(WANT_INTERVALS)
INTERVALS_WAIT();
#endif /* WANT_INTERVALS */
/* now we want to move our pointer to the next position in the */
/* data buffer...we may also want to wrap back to the "beginning" */
/* of the bufferspace, so we will mod the number of messages sent */
/* by the send width, and use that to calculate the offset to add */
/* to the base pointer. */
nummessages++;
send_ring = send_ring->next;
if (bytes_remaining) {
bytes_remaining -= send_size;
}
}
/* The test is over. Flush the buffers to the remote end. We do a */
/* graceful release to insure that all data has been taken by the */
/* remote. */
/* but first, if the verbosity is greater than 1, find-out what */
/* the SDP maximum segment_size was (if possible) */
if (verbosity > 1) {
sdp_mss = -1;
get_sdp_info(send_socket,&sdp_mss);
}
if (shutdown(send_socket,SHUT_WR) == SOCKET_ERROR) {
perror("netperf: cannot shutdown sdp stream socket");
exit(1);
}
/* hang a recv() off the socket to block until the remote has */
/* brought all the data up into the application. it will do a */
/* shutdown to cause a FIN to be sent our way. We will assume that */
/* any exit from the recv() call is good... raj 4/93 */
recv(send_socket, send_ring->buffer_ptr, send_size, 0);
/* this call will always give us the elapsed time for the test, and */
/* will also store-away the necessaries for cpu utilization */
cpu_stop(local_cpu_usage,&elapsed_time); /* was cpu being */
/* measured and how */
/* long did we really */
/* run? */
/* we are finished with the socket, so close it to prevent hitting */
/* the limit on maximum open files. */
close(send_socket);
if (!no_control) {
/* Get the statistics from the remote end. The remote will have
calculated service demand and all those interesting
things. If it wasn't supposed to care, it will return obvious
values. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote results obtained\n");
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,
"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
/* We now calculate what our thruput was for the test. In the
future, we may want to include a calculation of the thruput
measured by the remote, but it should be the case that for a
SDP stream test, that the two numbers should be *very*
close... We calculate bytes_sent regardless of the way the
test length was controlled. If it was time, we needed to,
and if it was by bytes, the user may have specified a number
of bytes that wasn't a multiple of the send_size, so we
really didn't send what he asked for ;-) */
bytes_sent = ntohd(sdp_stream_result->bytes_received);
}
else {
bytes_sent = (double)local_bytes_sent;
}
thruput = calc_thruput(bytes_sent);
if (local_cpu_usage || remote_cpu_usage) {
/* We must now do a little math for service demand and cpu */
/* utilization for the system(s) */
/* Of course, some of the information might be bogus because */
/* there was no idle counter in the kernel(s). We need to make */
/* a note of this for the user's benefit...*/
if (local_cpu_usage) {
local_cpu_utilization = calc_cpu_util(0.0);
local_service_demand = calc_service_demand(bytes_sent,
0.0,
0.0,
0);
}
else {
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
}
if (remote_cpu_usage) {
remote_cpu_utilization = sdp_stream_result->cpu_util;
remote_service_demand = calc_service_demand(bytes_sent,
0.0,
remote_cpu_utilization,
sdp_stream_result->num_cpus);
}
else {
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
}
else {
/* we were not measuring cpu, for the confidence stuff, we */
/* should make it -1.0 */
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
/* at this point, we want to calculate the confidence information. */
/* if debugging is on, calculate_confidence will print-out the */
/* parameters we pass it */
calculate_confidence(confidence_iteration,
elapsed_time,
thruput,
local_cpu_utilization,
remote_cpu_utilization,
local_service_demand,
remote_service_demand);
confidence_iteration++;
}
/* at this point, we have finished making all the runs that we */
/* will be making. so, we should extract what the calcuated values */
/* are for all the confidence stuff. we could make the values */
/* global, but that seemed a little messy, and it did not seem worth */
/* all the mucking with header files. so, we create a routine much */
/* like calcualte_confidence, which just returns the mean values. */
/* raj 11/94 */
retrieve_confident_values(&elapsed_time,
&thruput,
&local_cpu_utilization,
&remote_cpu_utilization,
&local_service_demand,
&remote_service_demand);
/* We are now ready to print all the information. If the user */
/* has specified zero-level verbosity, we will just print the */
/* local service demand, or the remote service demand. If the */
/* user has requested verbosity level 1, he will get the basic */
/* "streamperf" numbers. If the user has specified a verbosity */
/* of greater than 1, we will display a veritable plethora of */
/* background information from outside of this block as it it */
/* not cpu_measurement specific... */
if (confidence < 0) {
/* we did not hit confidence, but were we asked to look for it? */
if (iteration_max > 1) {
display_confidence();
}
}
if (local_cpu_usage || remote_cpu_usage) {
local_cpu_method = format_cpu_method(cpu_method);
remote_cpu_method = format_cpu_method(sdp_stream_result->cpu_method);
switch (verbosity) {
case 0:
if (local_cpu_usage) {
fprintf(where,
cpu_fmt_0,
local_service_demand,
local_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
else {
fprintf(where,
cpu_fmt_0,
remote_service_demand,
remote_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,
cpu_title,
format_units(),
local_cpu_method,
remote_cpu_method);
}
fprintf(where,
cpu_fmt_1, /* the format string */
rsr_size, /* remote recvbuf size */
lss_size, /* local sendbuf size */
send_size, /* how large were the sends */
elapsed_time, /* how long was the test */
thruput, /* what was the xfer rate */
local_cpu_utilization, /* local cpu */
remote_cpu_utilization, /* remote cpu */
local_service_demand, /* local service demand */
remote_service_demand, /* remote service demand */
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
}
}
else {
/* The tester did not wish to measure service demand. */
switch (verbosity) {
case 0:
fprintf(where,
tput_fmt_0,
thruput,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,tput_title,format_units());
}
fprintf(where,
tput_fmt_1, /* the format string */
rsr_size, /* remote recvbuf size */
lss_size, /* local sendbuf size */
send_size, /* how large were the sends */
elapsed_time, /* how long did it take */
thruput, /* how fast did it go */
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
}
}
/* it would be a good thing to include information about some of the */
/* other parameters that may have been set for this test, but at the */
/* moment, I do not wish to figure-out all the formatting, so I will */
/* just put this comment here to help remind me that it is something */
/* that should be done at a later time. */
if (verbosity > 1) {
/* The user wanted to know it all, so we will give it to him. */
/* This information will include as much as we can find about */
/* SDP statistics, the alignments of the sends and receives */
/* and all that sort of rot... */
/* this stuff needs to be worked-out in the presence of confidence */
/* intervals and multiple iterations of the test... raj 11/94 */
fprintf(where,
ksink_fmt,
"Bytes",
"Bytes",
"Bytes",
local_send_align,
remote_recv_align,
local_send_offset,
remote_recv_offset,
bytes_sent,
bytes_sent / (double)nummessages,
nummessages,
bytes_sent / (double)sdp_stream_result->recv_calls,
sdp_stream_result->recv_calls);
fprintf(where,
ksink_fmt2,
sdp_mss);
fflush(where);
#ifdef WANT_HISTOGRAM
fprintf(where,"\n\nHistogram of time spent in send() call.\n");
fflush(where);
HIST_report(time_hist);
#endif /* WANT_HISTOGRAM */
}
}
/* This routine implements the netperf-side SDP unidirectional data
transfer test (a.k.a. stream) for the sockets interface where the
data flow is from the netserver to the netperf. It receives its
parameters via global variables from the shell and writes its
output to the standard output. */
void
send_sdp_maerts(char remote_host[])
{
char *tput_title = "\
Recv Send Send \n\
Socket Socket Message Elapsed \n\
Size Size Size Time Throughput \n\
bytes bytes bytes secs. %s/sec \n\n";
char *tput_fmt_0 =
"%7.2f %s\n";
char *tput_fmt_1 =
"%6d %6d %6d %-6.2f %7.2f \n %s";
char *cpu_title = "\
Recv Send Send Utilization Service Demand\n\
Socket Socket Message Elapsed Send Recv Send Recv\n\
Size Size Size Time Throughput local remote local remote\n\
bytes bytes bytes secs. %-8.8s/s %% %c %% %c us/KB us/KB\n\n";
char *cpu_fmt_0 =
"%6.3f %c %s\n";
char *cpu_fmt_1 =
"%6d %6d %6d %-6.2f %7.2f %-6.2f %-6.2f %-6.3f %-6.3f %s\n";
char *ksink_fmt = "\n\
Alignment Offset %-8.8s %-8.8s Recvs %-8.8s Sends\n\
Local Remote Local Remote Xfered Per Per\n\
Recv Send Recv Send Recv (avg) Send (avg)\n\
%5d %5d %5d %5d %6.4g %6.2f %6d %6.2f %6d\n";
char *ksink_fmt2 = "\n\
Maximum\n\
Segment\n\
Size (bytes)\n\
%6d\n";
float elapsed_time;
/* what we want is to have a buffer space that is at least one */
/* recv-size greater than our recv window. this will insure that we */
/* are never trying to re-use a buffer that may still be in the hands */
/* of the transport. This buffer will be malloc'd after we have found */
/* the size of the local senc socket buffer. We will want to deal */
/* with alignment and offset concerns as well. */
struct ring_elt *recv_ring;
int len;
unsigned int nummessages = 0;
SOCKET recv_socket;
int bytes_remaining;
int sdp_mss = -1; /* possibly uninitialized on printf far below */
/* with links like fddi, one can recv > 32 bits worth of bytes */
/* during a test... ;-) at some point, this should probably become a */
/* 64bit integral type, but those are not entirely common yet */
double bytes_sent = 0.0;
unsigned long long local_bytes_recvd = 0;
float local_cpu_utilization;
float local_service_demand;
float remote_cpu_utilization;
float remote_service_demand;
double thruput;
struct addrinfo *remote_res;
struct addrinfo *local_res;
struct sdp_maerts_request_struct *sdp_maerts_request;
struct sdp_maerts_response_struct *sdp_maerts_response;
struct sdp_maerts_results_struct *sdp_maerts_result;
sdp_maerts_request =
(struct sdp_maerts_request_struct *)netperf_request.content.test_specific_data;
sdp_maerts_response =
(struct sdp_maerts_response_struct *)netperf_response.content.test_specific_data;
sdp_maerts_result =
(struct sdp_maerts_results_struct *)netperf_response.content.test_specific_data;
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
time_hist = HIST_new();
}
#endif /* WANT_HISTOGRAM */
/* since we are now disconnected from the code that established the */
/* control socket, and since we want to be able to use different */
/* protocols and such, we are passed the name of the remote host and */
/* must turn that into the test specific addressing information. */
complete_addrinfos(&remote_res,
&local_res,
remote_host,
SOCK_STREAM,
IPPROTO_TCP,
0);
if ( print_headers ) {
print_top_test_header("SDP MAERTS TEST",local_res,remote_res);
}
recv_ring = NULL;
confidence_iteration = 1;
init_stat();
/* we have a great-big while loop which controls the number of times */
/* we run a particular test. this is for the calculation of a */
/* confidence interval (I really should have stayed awake during */
/* probstats :). If the user did not request confidence measurement */
/* (no confidence is the default) then we will only go though the */
/* loop once. the confidence stuff originates from the folks at IBM */
while (((confidence < 0) && (confidence_iteration < iteration_max)) ||
(confidence_iteration <= iteration_min)) {
/* initialize a few counters. we have to remember that we might be */
/* going through the loop more than once. */
nummessages = 0;
bytes_sent = 0.0;
times_up = 0;
/*set up the data socket */
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
recv_socket = create_data_socket(local_res);
if (recv_socket == INVALID_SOCKET){
perror("netperf: send_sdp_maerts: sdp stream data socket");
exit(1);
}
if (debug) {
fprintf(where,"send_sdp_maerts: recv_socket obtained...\n");
}
/* at this point, we have either retrieved the socket buffer sizes, */
/* or have tried to set them, so now, we may want to set the recv */
/* size based on that (because the user either did not use a -m */
/* option, or used one with an argument of 0). If the socket buffer */
/* size is not available, we will set the recv size to 4KB - no */
/* particular reason, just arbitrary... */
if (recv_size == 0) {
if (lsr_size > 0) {
recv_size = lsr_size;
}
else {
recv_size = 4096;
}
}
/* set-up the data buffer ring with the requested alignment and offset. */
/* note also that we have allocated a quantity */
/* of memory that is at least one recv-size greater than our socket */
/* buffer size. We want to be sure that there are at least two */
/* buffers allocated - this can be a bit of a problem when the */
/* recv_size is bigger than the socket size, so we must check... the */
/* user may have wanted to explicitly set the "width" of our recv */
/* buffers, we should respect that wish... */
if (recv_width == 0) {
recv_width = (lsr_size/recv_size) + 1;
if (recv_width == 1) recv_width++;
}
if (recv_ring == NULL) {
/* only allocate the recv ring once. this is a networking test, */
/* not a memory allocation test. this way, we do not need a */
/* deallocate_buffer_ring() routine, and I don't feel like */
/* writing one anyway :) raj 11/94 */
recv_ring = allocate_buffer_ring(recv_width,
recv_size,
local_recv_align,
local_recv_offset);
}
/* If the user has requested cpu utilization measurements, we must */
/* calibrate the cpu(s). We will perform this task within the tests */
/* themselves. If the user has specified the cpu rate, then */
/* calibrate_local_cpu will return rather quickly as it will have */
/* nothing to do. If local_cpu_rate is zero, then we will go through */
/* all the "normal" calibration stuff and return the rate back. */
if (local_cpu_usage) {
local_cpu_rate = calibrate_local_cpu(local_cpu_rate);
}
if (!no_control) {
/* Tell the remote end to do a listen. The server alters the
socket paramters on the other side at this point, hence the
reason for all the values being passed in the setup
message. If the user did not specify any of the parameters,
they will be passed as 0, which will indicate to the remote
that no changes beyond the system's default should be
used. Alignment is the exception, it will default to 1, which
will be no alignment alterations. */
netperf_request.content.request_type = DO_SDP_MAERTS;
sdp_maerts_request->send_buf_size = rss_size_req;
sdp_maerts_request->recv_buf_size = rsr_size_req;
sdp_maerts_request->send_size = send_size;
sdp_maerts_request->no_delay = rem_nodelay;
sdp_maerts_request->send_alignment = remote_send_align;
sdp_maerts_request->send_offset = remote_send_offset;
sdp_maerts_request->measure_cpu = remote_cpu_usage;
sdp_maerts_request->cpu_rate = remote_cpu_rate;
if (test_time) {
sdp_maerts_request->test_length = test_time;
}
else {
sdp_maerts_request->test_length = test_bytes;
}
sdp_maerts_request->so_rcvavoid = rem_rcvavoid;
sdp_maerts_request->so_sndavoid = rem_sndavoid;
#ifdef DIRTY
sdp_maerts_request->dirty_count = rem_dirty_count;
sdp_maerts_request->clean_count = rem_clean_count;
#endif /* DIRTY */
sdp_maerts_request->port = atoi(remote_data_port);
sdp_maerts_request->ipfamily = af_to_nf(remote_res->ai_family);
if (debug > 1) {
fprintf(where,
"netperf: send_sdp_maerts: requesting SDP maerts test\n");
}
send_request();
/* The response from the remote will contain all of the relevant
socket parameters for this test type. We will put them back
into the variables here so they can be displayed if desired.
The remote will have calibrated CPU if necessary, and will
have done all the needed set-up we will have calibrated the
cpu locally before sending the request, and will grab the
counter value right after the connect returns. The remote
will grab the counter right after the accept call. This saves
the hassle of extra messages being sent for the SDP
tests. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote listen done.\n");
rsr_size = sdp_maerts_response->recv_buf_size;
rss_size = sdp_maerts_response->send_buf_size;
rem_nodelay = sdp_maerts_response->no_delay;
remote_cpu_usage= sdp_maerts_response->measure_cpu;
remote_cpu_rate = sdp_maerts_response->cpu_rate;
send_size = sdp_maerts_response->send_size;
/* we have to make sure that the server port number is in
network order */
set_port_number(remote_res,
(short)sdp_maerts_response->data_port_number);
rem_rcvavoid = sdp_maerts_response->so_rcvavoid;
rem_sndavoid = sdp_maerts_response->so_sndavoid;
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,
"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
}
#ifdef WANT_DEMO
DEMO_STREAM_SETUP(lsr_size,rss_size)
#endif
/*Connect up to the remote port on the data socket */
if (connect(recv_socket,
remote_res->ai_addr,
remote_res->ai_addrlen) == INVALID_SOCKET){
perror("netperf: send_sdp_maerts: data socket connect failed");
exit(1);
}
/* Data Socket set-up is finished. If there were problems, either */
/* the connect would have failed, or the previous response would */
/* have indicated a problem. I failed to see the value of the */
/* extra message after the accept on the remote. If it failed, */
/* we'll see it here. If it didn't, we might as well start pumping */
/* data. */
/* Set-up the test end conditions. For a maerts test, they can be */
/* either time or byte-count based. */
if (test_time) {
/* The user wanted to end the test after a period of time. */
times_up = 0;
bytes_remaining = 0;
/* in previous revisions, we had the same code repeated throught */
/* all the test suites. this was unnecessary, and meant more */
/* work for me when I wanted to switch to POSIX signals, so I */
/* have abstracted this out into a routine in netlib.c. if you */
/* are experiencing signal problems, you might want to look */
/* there. raj 11/94 */
if (!no_control) {
/* this is a netperf to netserver test, netserver will close
to tell us the test is over, so use PAD_TIME to avoid
causing the netserver fits. */
start_timer(test_time + PAD_TIME);
}
else {
/* this is a netperf to data source test, no PAD_TIME */
start_timer(test_time);
}
}
else {
/* The tester wanted to recv a number of bytes. we don't do that
in a SDP_MAERTS test. sorry. raj 2002-06-21 */
printf("netperf: send_sdp_maerts: test must be timed\n");
exit(1);
}
/* The cpu_start routine will grab the current time and possibly */
/* value of the idle counter for later use in measuring cpu */
/* utilization and/or service demand and thruput. */
cpu_start(local_cpu_usage);
#ifdef WANT_INTERVALS
INTERVALS_INIT();
#endif /* WANT_INTERVALS */
/* before we start, initialize a few variables */
#ifdef WANT_DEMO
if (demo_mode) {
HIST_timestamp(demo_one_ptr);
}
#endif
/* the test will continue until we either get a zero-byte recv()
on the socket or our failsafe timer expires. most of the time
we trust that we get a zero-byte recieve from the socket. raj
2002-06-21 */
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* timestamp just before we go into recv and then again just
after we come out raj 8/94 */
/* but only if we are actually going to display a histogram. raj
2006-02-07 */
HIST_timestamp(&time_one);
}
#endif /* WANT_HISTOGRAM */
while ((!times_up) && (len=recv(recv_socket,
recv_ring->buffer_ptr,
recv_size,
0)) > 0 ) {
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* timestamp the exit from the recv call and update the histogram */
HIST_timestamp(&time_two);
HIST_add(time_hist,delta_micro(&time_one,&time_two));
}
#endif /* WANT_HISTOGRAM */
#ifdef DIRTY
access_buffer(recv_ring->buffer_ptr,
recv_size,
loc_dirty_count,
loc_clean_count);
#endif /* DIRTY */
#ifdef WANT_DEMO
DEMO_STREAM_INTERVAL(len);
#endif
#ifdef WANT_INTERVALS
INTERVALS_WAIT();
#endif /* WANT_INTERVALS */
/* now we want to move our pointer to the next position in the */
/* data buffer...we may also want to wrap back to the "beginning" */
/* of the bufferspace, so we will mod the number of messages sent */
/* by the recv width, and use that to calculate the offset to add */
/* to the base pointer. */
nummessages++;
recv_ring = recv_ring->next;
if (bytes_remaining) {
bytes_remaining -= len;
}
local_bytes_recvd += len;
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* make sure we timestamp just before we go into recv */
/* raj 2004-06-15 */
HIST_timestamp(&time_one);
}
#endif /* WANT_HISTOGRAM */
}
/* an EINTR is to be expected when this is a no_control test */
if (((len < 0) || SOCKET_EINTR(len)) && (!no_control)) {
perror("send_sdp_maerts: data recv error");
printf("len was %d\n",len);
exit(1);
}
/* if we get here, it must mean we had a recv return of 0 before
the watchdog timer expired, or the watchdog timer expired and
this was a no_control test */
/* The test is over. Flush the buffers to the remote end. We do a
graceful release to tell the remote we have all the data. */
/* but first, if the verbosity is greater than 1, find-out what */
/* the SDP maximum segment_size was (if possible) */
if (verbosity > 1) {
sdp_mss = -1;
get_sdp_info(recv_socket,&sdp_mss);
}
if (shutdown(recv_socket,SHUT_WR) == SOCKET_ERROR) {
perror("netperf: cannot shutdown sdp maerts socket");
exit(1);
}
stop_timer();
/* this call will always give us the local elapsed time for the
test, and will also store-away the necessaries for cpu
utilization */
cpu_stop(local_cpu_usage,&elapsed_time); /* was cpu being */
/* measured and how */
/* long did we really */
/* run? */
/* we are finished with the socket, so close it to prevent hitting */
/* the limit on maximum open files. */
close(recv_socket);
if (!no_control) {
/* Get the statistics from the remote end. The remote will have
calculated service demand and all those interesting
things. If it wasn't supposed to care, it will return obvious
values. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote results obtained\n");
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,
"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
/* We now calculate what our thruput was for the test. In the
future, we may want to include a calculation of the thruput
measured by the remote, but it should be the case that for a
SDP maerts test, that the two numbers should be *very*
close... We calculate bytes_sent regardless of the way the
test length was controlled. If it was time, we needed to,
and if it was by bytes, the user may have specified a number
of bytes that wasn't a multiple of the recv_size, so we
really didn't recv what he asked for ;-) */
bytes_sent = ntohd(sdp_maerts_result->bytes_sent);
}
else {
bytes_sent = (double)local_bytes_recvd;
}
thruput = calc_thruput(bytes_sent);
if (local_cpu_usage || remote_cpu_usage) {
/* We must now do a little math for service demand and cpu */
/* utilization for the system(s) */
/* Of course, some of the information might be bogus because */
/* there was no idle counter in the kernel(s). We need to make */
/* a note of this for the user's benefit...*/
if (local_cpu_usage) {
local_cpu_utilization = calc_cpu_util(0.0);
local_service_demand = calc_service_demand(bytes_sent,
0.0,
0.0,
0);
}
else {
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
}
if (remote_cpu_usage) {
remote_cpu_utilization = sdp_maerts_result->cpu_util;
remote_service_demand = calc_service_demand(bytes_sent,
0.0,
remote_cpu_utilization,
sdp_maerts_result->num_cpus);
}
else {
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
}
else {
/* we were not measuring cpu, for the confidence stuff, we */
/* should make it -1.0 */
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
/* at this point, we want to calculate the confidence information. */
/* if debugging is on, calculate_confidence will print-out the */
/* parameters we pass it */
calculate_confidence(confidence_iteration,
elapsed_time,
thruput,
local_cpu_utilization,
remote_cpu_utilization,
local_service_demand,
remote_service_demand);
confidence_iteration++;
}
/* at this point, we have finished making all the runs that we */
/* will be making. so, we should extract what the calcuated values */
/* are for all the confidence stuff. we could make the values */
/* global, but that seemed a little messy, and it did not seem worth */
/* all the mucking with header files. so, we create a routine much */
/* like calcualte_confidence, which just returns the mean values. */
/* raj 11/94 */
retrieve_confident_values(&elapsed_time,
&thruput,
&local_cpu_utilization,
&remote_cpu_utilization,
&local_service_demand,
&remote_service_demand);
/* We are now ready to print all the information. If the user */
/* has specified zero-level verbosity, we will just print the */
/* local service demand, or the remote service demand. If the */
/* user has requested verbosity level 1, he will get the basic */
/* "streamperf" numbers. If the user has specified a verbosity */
/* of greater than 1, we will display a veritable plethora of */
/* background information from outside of this block as it it */
/* not cpu_measurement specific... */
if (confidence < 0) {
/* we did not hit confidence, but were we asked to look for it? */
if (iteration_max > 1) {
display_confidence();
}
}
if (local_cpu_usage || remote_cpu_usage) {
local_cpu_method = format_cpu_method(cpu_method);
remote_cpu_method = format_cpu_method(sdp_maerts_result->cpu_method);
switch (verbosity) {
case 0:
if (local_cpu_usage) {
fprintf(where,
cpu_fmt_0,
local_service_demand,
local_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
else {
fprintf(where,
cpu_fmt_0,
remote_service_demand,
remote_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,
cpu_title,
format_units(),
local_cpu_method,
remote_cpu_method);
}
fprintf(where,
cpu_fmt_1, /* the format string */
rsr_size, /* remote recvbuf size */
lss_size, /* local sendbuf size */
send_size, /* how large were the recvs */
elapsed_time, /* how long was the test */
thruput, /* what was the xfer rate */
local_cpu_utilization, /* local cpu */
remote_cpu_utilization, /* remote cpu */
local_service_demand, /* local service demand */
remote_service_demand, /* remote service demand */
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
}
}
else {
/* The tester did not wish to measure service demand. */
switch (verbosity) {
case 0:
fprintf(where,
tput_fmt_0,
thruput,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,tput_title,format_units());
}
fprintf(where,
tput_fmt_1, /* the format string */
lsr_size, /* local recvbuf size */
rss_size, /* remot sendbuf size */
send_size, /* how large were the recvs */
elapsed_time, /* how long did it take */
thruput, /* how fast did it go */
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
}
}
/* it would be a good thing to include information about some of the */
/* other parameters that may have been set for this test, but at the */
/* moment, I do not wish to figure-out all the formatting, so I will */
/* just put this comment here to help remind me that it is something */
/* that should be done at a later time. */
if (verbosity > 1) {
/* The user wanted to know it all, so we will give it to him. */
/* This information will include as much as we can find about */
/* SDP statistics, the alignments of the sends and receives */
/* and all that sort of rot... */
/* this stuff needs to be worked-out in the presence of confidence */
/* intervals and multiple iterations of the test... raj 11/94 */
fprintf(where,
ksink_fmt,
"Bytes",
"Bytes",
"Bytes",
local_recv_align,
remote_recv_align,
local_recv_offset,
remote_recv_offset,
bytes_sent,
bytes_sent / (double)nummessages,
nummessages,
bytes_sent / (double)sdp_maerts_result->send_calls,
sdp_maerts_result->send_calls);
fprintf(where,
ksink_fmt2,
sdp_mss);
fflush(where);
#ifdef WANT_HISTOGRAM
fprintf(where,"\n\nHistogram of time spent in recv() call.\n");
fflush(where);
HIST_report(time_hist);
#endif /* WANT_HISTOGRAM */
}
}
/* This is the server-side routine for the sdp stream test. It is */
/* implemented as one routine. I could break things-out somewhat, but */
/* didn't feel it was necessary. */
void
recv_sdp_stream()
{
struct sockaddr_in myaddr_in, peeraddr_in;
SOCKET s_listen,s_data;
netperf_socklen_t addrlen;
int len;
unsigned int receive_calls;
float elapsed_time;
double bytes_received;
struct ring_elt *recv_ring;
struct addrinfo *local_res;
char local_name[BUFSIZ];
char port_buffer[PORTBUFSIZE];
#ifdef DO_SELECT
fd_set readfds;
struct timeval timeout;
#endif /* DO_SELECT */
struct sdp_stream_request_struct *sdp_stream_request;
struct sdp_stream_response_struct *sdp_stream_response;
struct sdp_stream_results_struct *sdp_stream_results;
#ifdef DO_SELECT
FD_ZERO(&readfds);
timeout.tv_sec = 1;
timeout.tv_usec = 0;
#endif /* DO_SELECT */
sdp_stream_request =
(struct sdp_stream_request_struct *)netperf_request.content.test_specific_data;
sdp_stream_response =
(struct sdp_stream_response_struct *)netperf_response.content.test_specific_data;
sdp_stream_results =
(struct sdp_stream_results_struct *)netperf_response.content.test_specific_data;
if (debug) {
fprintf(where,"netserver: recv_sdp_stream: entered...\n");
fflush(where);
}
/* We want to set-up the listen socket with all the desired */
/* parameters and then let the initiator know that all is ready. If */
/* socket size defaults are to be used, then the initiator will have */
/* sent us 0's. If the socket sizes cannot be changed, then we will */
/* send-back what they are. If that information cannot be determined, */
/* then we send-back -1's for the sizes. If things go wrong for any */
/* reason, we will drop back ten yards and punt. */
/* If anything goes wrong, we want the remote to know about it. It */
/* would be best if the error that the remote reports to the user is */
/* the actual error we encountered, rather than some bogus unexpected */
/* response type message. */
if (debug) {
fprintf(where,"recv_sdp_stream: setting the response type...\n");
fflush(where);
}
netperf_response.content.response_type = SDP_STREAM_RESPONSE;
if (debug) {
fprintf(where,"recv_sdp_stream: the response type is set...\n");
fflush(where);
}
/* We now alter the message_ptr variable to be at the desired */
/* alignment with the desired offset. */
if (debug) {
fprintf(where,"recv_sdp_stream: requested alignment of %d\n",
sdp_stream_request->recv_alignment);
fflush(where);
}
/* create_data_socket expects to find some things in the global */
/* variables, so set the globals based on the values in the request. */
/* once the socket has been created, we will set the response values */
/* based on the updated value of those globals. raj 7/94 */
lss_size_req = sdp_stream_request->send_buf_size;
lsr_size_req = sdp_stream_request->recv_buf_size;
loc_nodelay = sdp_stream_request->no_delay;
loc_rcvavoid = sdp_stream_request->so_rcvavoid;
loc_sndavoid = sdp_stream_request->so_sndavoid;
set_hostname_and_port(local_name,
port_buffer,
nf_to_af(sdp_stream_request->ipfamily),
sdp_stream_request->port);
local_res = complete_addrinfo(local_name,
local_name,
port_buffer,
nf_to_af(sdp_stream_request->ipfamily),
SOCK_STREAM,
IPPROTO_TCP,
0);
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
s_listen = create_data_socket(local_res);
if (s_listen == INVALID_SOCKET) {
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
#ifdef WIN32
/* The test timer can fire during operations on the listening socket,
so to make the start_timer below work we have to move
it to close s_listen while we are blocked on accept. */
win_kludge_socket2 = s_listen;
#endif
/* what sort of sizes did we end-up with? */
if (sdp_stream_request->receive_size == 0) {
if (lsr_size > 0) {
recv_size = lsr_size;
}
else {
recv_size = 4096;
}
}
else {
recv_size = sdp_stream_request->receive_size;
}
/* we want to set-up our recv_ring in a manner analagous to what we */
/* do on the sending side. this is more for the sake of symmetry */
/* than for the needs of say copy avoidance, but it might also be */
/* more realistic - this way one could conceivably go with a */
/* double-buffering scheme when taking the data an putting it into */
/* the filesystem or something like that. raj 7/94 */
if (recv_width == 0) {
recv_width = (lsr_size/recv_size) + 1;
if (recv_width == 1) recv_width++;
}
recv_ring = allocate_buffer_ring(recv_width,
recv_size,
sdp_stream_request->recv_alignment,
sdp_stream_request->recv_offset);
if (debug) {
fprintf(where,"recv_sdp_stream: receive alignment and offset set...\n");
fflush(where);
}
/* Now, let's set-up the socket to listen for connections */
if (listen(s_listen, 5) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* now get the port number assigned by the system */
addrlen = sizeof(myaddr_in);
if (getsockname(s_listen,
(struct sockaddr *)&myaddr_in,
&addrlen) == SOCKET_ERROR){
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* Now myaddr_in contains the port and the internet address this is */
/* returned to the sender also implicitly telling the sender that the */
/* socket buffer sizing has been done. */
sdp_stream_response->data_port_number = (int) ntohs(myaddr_in.sin_port);
netperf_response.content.serv_errno = 0;
/* But wait, there's more. If the initiator wanted cpu measurements, */
/* then we must call the calibrate routine, which will return the max */
/* rate back to the initiator. If the CPU was not to be measured, or */
/* something went wrong with the calibration, we will return a -1 to */
/* the initiator. */
sdp_stream_response->cpu_rate = (float)0.0; /* assume no cpu */
if (sdp_stream_request->measure_cpu) {
sdp_stream_response->measure_cpu = 1;
sdp_stream_response->cpu_rate =
calibrate_local_cpu(sdp_stream_request->cpu_rate);
}
else {
sdp_stream_response->measure_cpu = 0;
}
/* before we send the response back to the initiator, pull some of */
/* the socket parms from the globals */
sdp_stream_response->send_buf_size = lss_size;
sdp_stream_response->recv_buf_size = lsr_size;
sdp_stream_response->no_delay = loc_nodelay;
sdp_stream_response->so_rcvavoid = loc_rcvavoid;
sdp_stream_response->so_sndavoid = loc_sndavoid;
sdp_stream_response->receive_size = recv_size;
send_response();
addrlen = sizeof(peeraddr_in);
if ((s_data=accept(s_listen,
(struct sockaddr *)&peeraddr_in,
&addrlen)) == INVALID_SOCKET) {
/* Let's just punt. The remote will be given some information */
close(s_listen);
exit(1);
}
#ifdef KLUDGE_SOCKET_OPTIONS
/* this is for those systems which *INCORRECTLY* fail to pass */
/* attributes across an accept() call. Including this goes against */
/* my better judgement :( raj 11/95 */
kludge_socket_options(s_data);
#endif /* KLUDGE_SOCKET_OPTIONS */
/* Now it's time to start receiving data on the connection. We will */
/* first grab the apropriate counters and then start grabbing. */
cpu_start(sdp_stream_request->measure_cpu);
/* The loop will exit when the sender does a shutdown, which will */
/* return a length of zero */
/* there used to be an #ifdef DIRTY call to access_buffer() here,
but we have switched from accessing the buffer before the recv()
call to accessing the buffer after the recv() call. The
accessing before was, IIRC, related to having dirty data when
doing page-flipping copy avoidance. */
bytes_received = 0;
receive_calls = 0;
while ((len = recv(s_data, recv_ring->buffer_ptr, recv_size, 0)) != 0) {
if (len == SOCKET_ERROR )
{
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
bytes_received += len;
receive_calls++;
#ifdef DIRTY
/* we access the buffer after the recv() call now, rather than before */
access_buffer(recv_ring->buffer_ptr,
recv_size,
sdp_stream_request->dirty_count,
sdp_stream_request->clean_count);
#endif /* DIRTY */
/* move to the next buffer in the recv_ring */
recv_ring = recv_ring->next;
#ifdef PAUSE
sleep(1);
#endif /* PAUSE */
#ifdef DO_SELECT
FD_SET(s_data,&readfds);
select(s_data+1,&readfds,NULL,NULL,&timeout);
#endif /* DO_SELECT */
}
/* perform a shutdown to signal the sender that */
/* we have received all the data sent. raj 4/93 */
if (shutdown(s_data,SHUT_WR) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
cpu_stop(sdp_stream_request->measure_cpu,&elapsed_time);
/* send the results to the sender */
if (debug) {
fprintf(where,
"recv_sdp_stream: got %g bytes\n",
bytes_received);
fprintf(where,
"recv_sdp_stream: got %d recvs\n",
receive_calls);
fflush(where);
}
sdp_stream_results->bytes_received = htond(bytes_received);
sdp_stream_results->elapsed_time = elapsed_time;
sdp_stream_results->recv_calls = receive_calls;
sdp_stream_results->cpu_method = cpu_method;
sdp_stream_results->num_cpus = lib_num_loc_cpus;
if (sdp_stream_request->measure_cpu) {
sdp_stream_results->cpu_util = calc_cpu_util(0.0);
};
if (debug) {
fprintf(where,
"recv_sdp_stream: test complete, sending results.\n");
fprintf(where,
" bytes_received %g receive_calls %d\n",
bytes_received,
receive_calls);
fprintf(where,
" len %d\n",
len);
fflush(where);
}
send_response();
/* we are now done with the sockets */
close(s_data);
close(s_listen);
}
/* This is the server-side routine for the sdp maerts test. It is
implemented as one routine. I could break things-out somewhat, but
didn't feel it was necessary. */
void
recv_sdp_maerts()
{
struct sockaddr_in myaddr_in, peeraddr_in;
struct addrinfo *local_res;
char local_name[BUFSIZ];
char port_buffer[PORTBUFSIZE];
SOCKET s_listen,s_data;
netperf_socklen_t addrlen;
int len;
unsigned int send_calls;
float elapsed_time;
double bytes_sent = 0.0 ;
struct ring_elt *send_ring;
struct sdp_maerts_request_struct *sdp_maerts_request;
struct sdp_maerts_response_struct *sdp_maerts_response;
struct sdp_maerts_results_struct *sdp_maerts_results;
sdp_maerts_request =
(struct sdp_maerts_request_struct *)netperf_request.content.test_specific_data;
sdp_maerts_response =
(struct sdp_maerts_response_struct *)netperf_response.content.test_specific_data;
sdp_maerts_results =
(struct sdp_maerts_results_struct *)netperf_response.content.test_specific_data;
if (debug) {
fprintf(where,"netserver: recv_sdp_maerts: entered...\n");
fflush(where);
}
/* We want to set-up the listen socket with all the desired
parameters and then let the initiator know that all is ready. If
socket size defaults are to be used, then the initiator will have
sent us 0's. If the socket sizes cannot be changed, then we will
send-back what they are. If that information cannot be
determined, then we send-back -1's for the sizes. If things go
wrong for any reason, we will drop back ten yards and punt. */
/* If anything goes wrong, we want the remote to know about it. It
would be best if the error that the remote reports to the user is
the actual error we encountered, rather than some bogus
unexpected response type message. */
if (debug) {
fprintf(where,"recv_sdp_maerts: setting the response type...\n");
fflush(where);
}
netperf_response.content.response_type = SDP_MAERTS_RESPONSE;
if (debug) {
fprintf(where,"recv_sdp_maerts: the response type is set...\n");
fflush(where);
}
/* We now alter the message_ptr variable to be at the desired */
/* alignment with the desired offset. */
if (debug) {
fprintf(where,"recv_sdp_maerts: requested alignment of %d\n",
sdp_maerts_request->send_alignment);
fflush(where);
}
/* Grab a socket to listen on, and then listen on it. */
if (debug) {
fprintf(where,"recv_sdp_maerts: grabbing a socket...\n");
fflush(where);
}
/* create_data_socket expects to find some things in the global */
/* variables, so set the globals based on the values in the request. */
/* once the socket has been created, we will set the response values */
/* based on the updated value of those globals. raj 7/94 */
lss_size_req = sdp_maerts_request->send_buf_size;
lsr_size_req = sdp_maerts_request->recv_buf_size;
loc_nodelay = sdp_maerts_request->no_delay;
loc_rcvavoid = sdp_maerts_request->so_rcvavoid;
loc_sndavoid = sdp_maerts_request->so_sndavoid;
set_hostname_and_port(local_name,
port_buffer,
nf_to_af(sdp_maerts_request->ipfamily),
sdp_maerts_request->port);
local_res = complete_addrinfo(local_name,
local_name,
port_buffer,
nf_to_af(sdp_maerts_request->ipfamily),
SOCK_STREAM,
IPPROTO_TCP,
0);
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
s_listen = create_data_socket(local_res);
if (s_listen == INVALID_SOCKET) {
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
#ifdef WIN32
/* The test timer can fire during operations on the listening socket,
so to make the start_timer below work we have to move
it to close s_listen while we are blocked on accept. */
win_kludge_socket2 = s_listen;
#endif
/* what sort of sizes did we end-up with? */
if (sdp_maerts_request->send_size == 0) {
if (lss_size > 0) {
send_size = lss_size;
}
else {
send_size = 4096;
}
}
else {
send_size = sdp_maerts_request->send_size;
}
/* we want to set-up our recv_ring in a manner analagous to what we */
/* do on the recving side. this is more for the sake of symmetry */
/* than for the needs of say copy avoidance, but it might also be */
/* more realistic - this way one could conceivably go with a */
/* double-buffering scheme when taking the data an putting it into */
/* the filesystem or something like that. raj 7/94 */
if (send_width == 0) {
send_width = (lsr_size/send_size) + 1;
if (send_width == 1) send_width++;
}
send_ring = allocate_buffer_ring(send_width,
send_size,
sdp_maerts_request->send_alignment,
sdp_maerts_request->send_offset);
if (debug) {
fprintf(where,"recv_sdp_maerts: receive alignment and offset set...\n");
fflush(where);
}
/* Now, let's set-up the socket to listen for connections */
if (listen(s_listen, 5) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* now get the port number assigned by the system */
addrlen = sizeof(myaddr_in);
if (getsockname(s_listen,
(struct sockaddr *)&myaddr_in,
&addrlen) == SOCKET_ERROR){
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* Now myaddr_in contains the port and the internet address this is */
/* returned to the sender also implicitly telling the sender that the */
/* socket buffer sizing has been done. */
sdp_maerts_response->data_port_number = (int) ntohs(myaddr_in.sin_port);
netperf_response.content.serv_errno = 0;
/* But wait, there's more. If the initiator wanted cpu measurements, */
/* then we must call the calibrate routine, which will return the max */
/* rate back to the initiator. If the CPU was not to be measured, or */
/* something went wrong with the calibration, we will return a -1 to */
/* the initiator. */
sdp_maerts_response->cpu_rate = (float)0.0; /* assume no cpu */
if (sdp_maerts_request->measure_cpu) {
sdp_maerts_response->measure_cpu = 1;
sdp_maerts_response->cpu_rate =
calibrate_local_cpu(sdp_maerts_request->cpu_rate);
}
else {
sdp_maerts_response->measure_cpu = 0;
}
/* before we send the response back to the initiator, pull some of */
/* the socket parms from the globals */
sdp_maerts_response->send_buf_size = lss_size;
sdp_maerts_response->recv_buf_size = lsr_size;
sdp_maerts_response->no_delay = loc_nodelay;
sdp_maerts_response->so_rcvavoid = loc_rcvavoid;
sdp_maerts_response->so_sndavoid = loc_sndavoid;
sdp_maerts_response->send_size = send_size;
send_response();
addrlen = sizeof(peeraddr_in);
/* we will start the timer before the accept() to be somewhat
analagous to the starting of the timer before the connect() call
in the SDP_STREAM test. raj 2002-06-21 */
start_timer(sdp_maerts_request->test_length);
/* Now it's time to start receiving data on the connection. We will
first grab the apropriate counters and then start grabbing. */
cpu_start(sdp_maerts_request->measure_cpu);
if ((s_data=accept(s_listen,
(struct sockaddr *)&peeraddr_in,
&addrlen)) == INVALID_SOCKET) {
/* Let's just punt. The remote will be given some information */
close(s_listen);
exit(1);
}
#ifdef KLUDGE_SOCKET_OPTIONS
/* this is for those systems which *INCORRECTLY* fail to pass
attributes across an accept() call. Including this goes against
my better judgement :( raj 11/95 */
kludge_socket_options(s_data);
#endif /* KLUDGE_SOCKET_OPTIONS */
/* The loop will exit when the sender does a shutdown, which will */
/* return a length of zero */
bytes_sent = 0.0;
send_calls = 0;
len = 0; /* nt-lint; len is not initialized (printf far below) if
times_up initially true.*/
times_up = 0; /* must remember to initialize this little beauty */
while (!times_up) {
#ifdef DIRTY
/* we want to dirty some number of consecutive integers in the buffer */
/* we are about to send. we may also want to bring some number of */
/* them cleanly into the cache. The clean ones will follow any dirty */
/* ones into the cache. */
access_buffer(send_ring->buffer_ptr,
send_size,
sdp_maerts_request->dirty_count,
sdp_maerts_request->clean_count);
#endif /* DIRTY */
if((len=send(s_data,
send_ring->buffer_ptr,
send_size,
0)) != send_size) {
if ((len >=0) || SOCKET_EINTR(len)) {
/* the test was interrupted, must be the end of test */
break;
}
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
bytes_sent += len;
send_calls++;
/* more to the next buffer in the send_ring */
send_ring = send_ring->next;
}
/* perform a shutdown to signal the sender that */
/* we have received all the data sent. raj 4/93 */
if (shutdown(s_data,SHUT_WR) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
/* hang a recv() off the socket to block until the remote has
brought all the data up into the application. it will do a
shutdown to cause a FIN to be sent our way. We will assume that
any exit from the recv() call is good... raj 4/93 */
recv(s_data, send_ring->buffer_ptr, send_size, 0);
cpu_stop(sdp_maerts_request->measure_cpu,&elapsed_time);
/* send the results to the sender */
if (debug) {
fprintf(where,
"recv_sdp_maerts: got %g bytes\n",
bytes_sent);
fprintf(where,
"recv_sdp_maerts: got %d sends\n",
send_calls);
fflush(where);
}
sdp_maerts_results->bytes_sent = htond(bytes_sent);
sdp_maerts_results->elapsed_time = elapsed_time;
sdp_maerts_results->send_calls = send_calls;
if (sdp_maerts_request->measure_cpu) {
sdp_maerts_results->cpu_util = calc_cpu_util(0.0);
};
if (debug) {
fprintf(where,
"recv_sdp_maerts: test complete, sending results.\n");
fprintf(where,
" bytes_sent %g send_calls %d\n",
bytes_sent,
send_calls);
fprintf(where,
" len %d\n",
len);
fflush(where);
}
sdp_maerts_results->cpu_method = cpu_method;
sdp_maerts_results->num_cpus = lib_num_loc_cpus;
send_response();
/* we are now done with the sockets */
close(s_data);
close(s_listen);
}
/* this routine implements the sending (netperf) side of the SDP_RR */
/* test. */
void
send_sdp_rr(char remote_host[])
{
char *tput_title = "\
Local /Remote\n\
Socket Size Request Resp. Elapsed Trans.\n\
Send Recv Size Size Time Rate \n\
bytes Bytes bytes bytes secs. per sec \n\n";
char *tput_fmt_0 =
"%7.2f %s\n";
char *tput_fmt_1_line_1 = "\
%-6d %-6d %-6d %-6d %-6.2f %7.2f %s\n";
char *tput_fmt_1_line_2 = "\
%-6d %-6d\n";
char *cpu_title = "\
Local /Remote\n\
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem\n\
Send Recv Size Size Time Rate local remote local remote\n\
bytes bytes bytes bytes secs. per sec %% %c %% %c us/Tr us/Tr\n\n";
char *cpu_fmt_0 =
"%6.3f %c %s\n";
char *cpu_fmt_1_line_1 = "\
%-6d %-6d %-6d %-6d %-6.2f %-6.2f %-6.2f %-6.2f %-6.3f %-6.3f %s\n";
char *cpu_fmt_1_line_2 = "\
%-6d %-6d\n";
char *ksink_fmt = "\
Alignment Offset\n\
Local Remote Local Remote\n\
Send Recv Send Recv\n\
%5d %5d %5d %5d\n";
int timed_out = 0;
float elapsed_time;
int len;
char *temp_message_ptr;
int nummessages;
SOCKET send_socket;
int trans_remaining;
double bytes_xferd;
struct ring_elt *send_ring;
struct ring_elt *recv_ring;
int rsp_bytes_left;
int rsp_bytes_recvd;
float local_cpu_utilization;
float local_service_demand;
float remote_cpu_utilization;
float remote_service_demand;
double thruput;
struct addrinfo *local_res;
struct addrinfo *remote_res;
struct sdp_rr_request_struct *sdp_rr_request;
struct sdp_rr_response_struct *sdp_rr_response;
struct sdp_rr_results_struct *sdp_rr_result;
#ifdef WANT_FIRST_BURST
#define REQUEST_CWND_INITIAL 2
/* "in the beginning..." the WANT_FIRST_BURST stuff was like both
Unix and the state of New Jersey - both were simple an unspoiled.
then it was realized that some stacks are quite picky about
initial congestion windows and a non-trivial initial burst of
requests would not be individual segments even with TCP_NODELAY
set. so, we have to start tracking a poor-man's congestion window
up here in window space because we want to try to make something
happen that frankly, we cannot guarantee with the specification
of SDP. ain't that grand?-) raj 2006-01-30 */
int requests_outstanding = 0;
int request_cwnd = REQUEST_CWND_INITIAL; /* we ass-u-me that having
three requests
outstanding at the
beginning of the test
is ok with SDP stacks
of interest. the first
two will come from our
first_burst loop, and
the third from our
regularly scheduled
send */
#endif
sdp_rr_request =
(struct sdp_rr_request_struct *)netperf_request.content.test_specific_data;
sdp_rr_response=
(struct sdp_rr_response_struct *)netperf_response.content.test_specific_data;
sdp_rr_result =
(struct sdp_rr_results_struct *)netperf_response.content.test_specific_data;
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
time_hist = HIST_new();
}
#endif /* WANT_HISTOGRAM */
/* since we are now disconnected from the code that established the */
/* control socket, and since we want to be able to use different */
/* protocols and such, we are passed the name of the remote host and */
/* must turn that into the test specific addressing information. */
complete_addrinfos(&remote_res,
&local_res,
remote_host,
SOCK_STREAM,
IPPROTO_TCP,
0);
if ( print_headers ) {
print_top_test_header("SDP REQUEST/RESPONSE TEST",local_res,remote_res);
}
/* initialize a few counters */
send_ring = NULL;
recv_ring = NULL;
confidence_iteration = 1;
init_stat();
/* we have a great-big while loop which controls the number of times */
/* we run a particular test. this is for the calculation of a */
/* confidence interval (I really should have stayed awake during */
/* probstats :). If the user did not request confidence measurement */
/* (no confidence is the default) then we will only go though the */
/* loop once. the confidence stuff originates from the folks at IBM */
while (((confidence < 0) && (confidence_iteration < iteration_max)) ||
(confidence_iteration <= iteration_min)) {
/* initialize a few counters. we have to remember that we might be */
/* going through the loop more than once. */
nummessages = 0;
bytes_xferd = 0.0;
times_up = 0;
timed_out = 0;
trans_remaining = 0;
#ifdef WANT_FIRST_BURST
/* we have to remember to reset the number of transactions
outstanding and the "congestion window for each new
iteration. raj 2006-01-31 */
requests_outstanding = 0;
request_cwnd = REQUEST_CWND_INITIAL;
#endif
/* set-up the data buffers with the requested alignment and offset. */
/* since this is a request/response test, default the send_width and */
/* recv_width to 1 and not two raj 7/94 */
if (send_width == 0) send_width = 1;
if (recv_width == 0) recv_width = 1;
if (send_ring == NULL) {
send_ring = allocate_buffer_ring(send_width,
req_size,
local_send_align,
local_send_offset);
}
if (recv_ring == NULL) {
recv_ring = allocate_buffer_ring(recv_width,
rsp_size,
local_recv_align,
local_recv_offset);
}
/*set up the data socket */
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
send_socket = create_data_socket(local_res);
if (send_socket == INVALID_SOCKET){
perror("netperf: send_sdp_rr: sdp stream data socket");
exit(1);
}
if (debug) {
fprintf(where,"send_sdp_rr: send_socket obtained...\n");
}
/* If the user has requested cpu utilization measurements, we must */
/* calibrate the cpu(s). We will perform this task within the tests */
/* themselves. If the user has specified the cpu rate, then */
/* calibrate_local_cpu will return rather quickly as it will have */
/* nothing to do. If local_cpu_rate is zero, then we will go through */
/* all the "normal" calibration stuff and return the rate back.*/
if (local_cpu_usage) {
local_cpu_rate = calibrate_local_cpu(local_cpu_rate);
}
if (!no_control) {
/* Tell the remote end to do a listen. The server alters the
socket paramters on the other side at this point, hence the
reason for all the values being passed in the setup
message. If the user did not specify any of the parameters,
they will be passed as 0, which will indicate to the remote
that no changes beyond the system's default should be
used. Alignment is the exception, it will default to 8, which
will be no alignment alterations. */
netperf_request.content.request_type = DO_SDP_RR;
sdp_rr_request->recv_buf_size = rsr_size_req;
sdp_rr_request->send_buf_size = rss_size_req;
sdp_rr_request->recv_alignment = remote_recv_align;
sdp_rr_request->recv_offset = remote_recv_offset;
sdp_rr_request->send_alignment = remote_send_align;
sdp_rr_request->send_offset = remote_send_offset;
sdp_rr_request->request_size = req_size;
sdp_rr_request->response_size = rsp_size;
sdp_rr_request->no_delay = rem_nodelay;
sdp_rr_request->measure_cpu = remote_cpu_usage;
sdp_rr_request->cpu_rate = remote_cpu_rate;
sdp_rr_request->so_rcvavoid = rem_rcvavoid;
sdp_rr_request->so_sndavoid = rem_sndavoid;
if (test_time) {
sdp_rr_request->test_length = test_time;
}
else {
sdp_rr_request->test_length = test_trans * -1;
}
sdp_rr_request->port = atoi(remote_data_port);
sdp_rr_request->ipfamily = af_to_nf(remote_res->ai_family);
if (debug > 1) {
fprintf(where,"netperf: send_sdp_rr: requesting SDP rr test\n");
}
send_request();
/* The response from the remote will contain all of the relevant
socket parameters for this test type. We will put them back
into the variables here so they can be displayed if desired.
The remote will have calibrated CPU if necessary, and will
have done all the needed set-up we will have calibrated the
cpu locally before sending the request, and will grab the
counter value right after the connect returns. The remote
will grab the counter right after the accept call. This saves
the hassle of extra messages being sent for the SDP
tests. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote listen done.\n");
rsr_size = sdp_rr_response->recv_buf_size;
rss_size = sdp_rr_response->send_buf_size;
rem_nodelay = sdp_rr_response->no_delay;
remote_cpu_usage = sdp_rr_response->measure_cpu;
remote_cpu_rate = sdp_rr_response->cpu_rate;
/* make sure that port numbers are in network order */
set_port_number(remote_res,(short)sdp_rr_response->data_port_number);
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,
"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
}
#ifdef WANT_DEMO
DEMO_RR_SETUP(1000)
#endif
/*Connect up to the remote port on the data socket */
if (connect(send_socket,
remote_res->ai_addr,
remote_res->ai_addrlen) == INVALID_SOCKET){
perror("netperf: data socket connect failed");
exit(1);
}
/* Data Socket set-up is finished. If there were problems, either the */
/* connect would have failed, or the previous response would have */
/* indicated a problem. I failed to see the value of the extra */
/* message after the accept on the remote. If it failed, we'll see it */
/* here. If it didn't, we might as well start pumping data. */
/* Set-up the test end conditions. For a request/response test, they */
/* can be either time or transaction based. */
if (test_time) {
/* The user wanted to end the test after a period of time. */
times_up = 0;
trans_remaining = 0;
start_timer(test_time);
}
else {
/* The tester wanted to send a number of bytes. */
trans_remaining = test_bytes;
times_up = 1;
}
/* The cpu_start routine will grab the current time and possibly */
/* value of the idle counter for later use in measuring cpu */
/* utilization and/or service demand and thruput. */
cpu_start(local_cpu_usage);
#ifdef WANT_INTERVALS
INTERVALS_INIT();
#endif /* WANT_INTERVALS */
/* We use an "OR" to control test execution. When the test is */
/* controlled by time, the byte count check will always return false. */
/* When the test is controlled by byte count, the time test will */
/* always return false. When the test is finished, the whole */
/* expression will go false and we will stop sending data. I think I */
/* just arbitrarily decrement trans_remaining for the timed test, but */
/* will not do that just yet... One other question is whether or not */
/* the send buffer and the receive buffer should be the same buffer. */
#ifdef WANT_DEMO
if (demo_mode) {
HIST_timestamp(demo_one_ptr);
}
#endif
while ((!times_up) || (trans_remaining > 0)) {
/* send the request. we assume that if we use a blocking socket, */
/* the request will be sent at one shot. */
#ifdef WANT_FIRST_BURST
/* we can inject no more than request_cwnd, which will grow with
time, and no more than first_burst_size. we don't use <= to
account for the "regularly scheduled" send call. of course
that makes it more a "max_outstanding_ than a
"first_burst_size" but for now we won't fix the names. also,
I suspect the extra check against < first_burst_size is
redundant since later I expect to make sure that request_cwnd
can never get larger than first_burst_size, but just at the
moment I'm feeling like a belt and suspenders kind of
programmer. raj 2006-01-30 */
while ((first_burst_size > 0) &&
(requests_outstanding < request_cwnd) &&
(requests_outstanding < first_burst_size)) {
if (debug) {
fprintf(where,
"injecting, req_outstndng %d req_cwnd %d burst %d\n",
requests_outstanding,
request_cwnd,
first_burst_size);
}
if ((len = send(send_socket,
send_ring->buffer_ptr,
req_size,
0)) != req_size) {
/* we should never hit the end of the test in the first burst */
perror("send_sdp_rr: initial burst data send error");
exit(-1);
}
requests_outstanding += 1;
}
#endif /* WANT_FIRST_BURST */
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
/* timestamp just before our call to send, and then again just
after the receive raj 8/94 */
/* but only if we are actually going to display one. raj
2007-02-07 */
HIST_timestamp(&time_one);
}
#endif /* WANT_HISTOGRAM */
if ((len = send(send_socket,
send_ring->buffer_ptr,
req_size,
0)) != req_size) {
if (SOCKET_EINTR(len) || (errno == 0)) {
/* we hit the end of a */
/* timed test. */
timed_out = 1;
break;
}
perror("send_sdp_rr: data send error");
exit(1);
}
send_ring = send_ring->next;
#ifdef WANT_FIRST_BURST
requests_outstanding += 1;
#endif
/* receive the response */
rsp_bytes_left = rsp_size;
temp_message_ptr = recv_ring->buffer_ptr;
while(rsp_bytes_left > 0) {
if((rsp_bytes_recvd=recv(send_socket,
temp_message_ptr,
rsp_bytes_left,
0)) == SOCKET_ERROR) {
if ( SOCKET_EINTR(rsp_bytes_recvd) ) {
/* We hit the end of a timed test. */
timed_out = 1;
break;
}
perror("send_sdp_rr: data recv error");
exit(1);
}
rsp_bytes_left -= rsp_bytes_recvd;
temp_message_ptr += rsp_bytes_recvd;
}
recv_ring = recv_ring->next;
#ifdef WANT_FIRST_BURST
/* so, since we've gotten a response back, update the
bookkeeping accordingly. there is one less request
outstanding and we can put one more out there than before. */
requests_outstanding -= 1;
if (request_cwnd < first_burst_size) {
request_cwnd += 1;
if (debug) {
fprintf(where,
"incr req_cwnd to %d first_burst %d reqs_outstndng %d\n",
request_cwnd,
first_burst_size,
requests_outstanding);
}
}
#endif
if (timed_out) {
/* we may have been in a nested while loop - we need */
/* another call to break. */
break;
}
#ifdef WANT_HISTOGRAM
if (verbosity > 1) {
HIST_timestamp(&time_two);
HIST_add(time_hist,delta_micro(&time_one,&time_two));
}
#endif /* WANT_HISTOGRAM */
#ifdef WANT_DEMO
DEMO_RR_INTERVAL(1);
#endif
#ifdef WANT_INTERVALS
INTERVALS_WAIT();
#endif /* WANT_INTERVALS */
nummessages++;
if (trans_remaining) {
trans_remaining--;
}
if (debug > 3) {
if ((nummessages % 100) == 0) {
fprintf(where,
"Transaction %d completed\n",
nummessages);
fflush(where);
}
}
}
/* At this point we used to call shutdown on the data socket to be
sure all the data was delivered, but this was not germane in a
request/response test, and it was causing the tests to "hang"
when they were being controlled by time. So, I have replaced
this shutdown call with a call to close that can be found later
in the procedure. */
/* this call will always give us the elapsed time for the test,
and will also store-away the necessaries for cpu utilization */
cpu_stop(local_cpu_usage,&elapsed_time); /* was cpu being */
/* measured? how long */
/* did we really run? */
if (!no_control) {
/* Get the statistics from the remote end. The remote will have
calculated CPU utilization. If it wasn't supposed to care, it
will return obvious values. */
recv_response();
if (!netperf_response.content.serv_errno) {
if (debug)
fprintf(where,"remote results obtained\n");
}
else {
Set_errno(netperf_response.content.serv_errno);
fprintf(where,"netperf: remote error %d",
netperf_response.content.serv_errno);
perror("");
fflush(where);
exit(1);
}
}
/* We now calculate what our throughput was for the test. */
bytes_xferd = (req_size * nummessages) + (rsp_size * nummessages);
thruput = nummessages/elapsed_time;
if (local_cpu_usage || remote_cpu_usage) {
/* We must now do a little math for service demand and cpu
utilization for the system(s) Of course, some of the
information might be bogus because there was no idle counter in
the kernel(s). We need to make a note of this for the user's
benefit... */
if (local_cpu_usage) {
local_cpu_utilization = calc_cpu_util(0.0);
/* since calc_service demand is doing ms/Kunit we will
multiply the number of transaction by 1024 to get "good"
numbers */
local_service_demand = calc_service_demand((double) nummessages*1024,
0.0,
0.0,
0);
}
else {
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
}
if (remote_cpu_usage) {
remote_cpu_utilization = sdp_rr_result->cpu_util;
/* since calc_service demand is doing ms/Kunit we will
multiply the number of transaction by 1024 to get "good"
numbers */
remote_service_demand = calc_service_demand((double) nummessages*1024,
0.0,
remote_cpu_utilization,
sdp_rr_result->num_cpus);
}
else {
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
}
else {
/* we were not measuring cpu, for the confidence stuff, we */
/* should make it -1.0 */
local_cpu_utilization = (float) -1.0;
local_service_demand = (float) -1.0;
remote_cpu_utilization = (float) -1.0;
remote_service_demand = (float) -1.0;
}
/* at this point, we want to calculate the confidence information.
if debugging is on, calculate_confidence will print-out the
parameters we pass it */
calculate_confidence(confidence_iteration,
elapsed_time,
thruput,
local_cpu_utilization,
remote_cpu_utilization,
local_service_demand,
remote_service_demand);
confidence_iteration++;
/* we are now done with the socket, so close it */
close(send_socket);
}
retrieve_confident_values(&elapsed_time,
&thruput,
&local_cpu_utilization,
&remote_cpu_utilization,
&local_service_demand,
&remote_service_demand);
/* We are now ready to print all the information. If the user has
specified zero-level verbosity, we will just print the local
service demand, or the remote service demand. If the user has
requested verbosity level 1, he will get the basic "streamperf"
numbers. If the user has specified a verbosity of greater than 1,
we will display a veritable plethora of background information
from outside of this block as it it not cpu_measurement
specific... */
if (confidence < 0) {
/* we did not hit confidence, but were we asked to look for it? */
if (iteration_max > 1) {
display_confidence();
}
}
if (local_cpu_usage || remote_cpu_usage) {
local_cpu_method = format_cpu_method(cpu_method);
remote_cpu_method = format_cpu_method(sdp_rr_result->cpu_method);
switch (verbosity) {
case 0:
if (local_cpu_usage) {
fprintf(where,
cpu_fmt_0,
local_service_demand,
local_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
else {
fprintf(where,
cpu_fmt_0,
remote_service_demand,
remote_cpu_method,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
}
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,
cpu_title,
local_cpu_method,
remote_cpu_method);
}
fprintf(where,
cpu_fmt_1_line_1, /* the format string */
lss_size, /* local sendbuf size */
lsr_size,
req_size, /* how large were the requests */
rsp_size, /* guess */
elapsed_time, /* how long was the test */
thruput,
local_cpu_utilization, /* local cpu */
remote_cpu_utilization, /* remote cpu */
local_service_demand, /* local service demand */
remote_service_demand, /* remote service demand */
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
fprintf(where,
cpu_fmt_1_line_2,
rss_size,
rsr_size);
break;
}
}
else {
/* The tester did not wish to measure service demand. */
switch (verbosity) {
case 0:
fprintf(where,
tput_fmt_0,
thruput,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
break;
case 1:
case 2:
if (print_headers) {
fprintf(where,tput_title,format_units());
}
fprintf(where,
tput_fmt_1_line_1, /* the format string */
lss_size,
lsr_size,
req_size, /* how large were the requests */
rsp_size, /* how large were the responses */
elapsed_time, /* how long did it take */
thruput,
((print_headers) ||
(result_brand == NULL)) ? "" : result_brand);
fprintf(where,
tput_fmt_1_line_2,
rss_size, /* remote recvbuf size */
rsr_size);
break;
}
}
/* it would be a good thing to include information about some of the */
/* other parameters that may have been set for this test, but at the */
/* moment, I do not wish to figure-out all the formatting, so I will */
/* just put this comment here to help remind me that it is something */
/* that should be done at a later time. */
/* how to handle the verbose information in the presence of */
/* confidence intervals is yet to be determined... raj 11/94 */
if (verbosity > 1) {
/* The user wanted to know it all, so we will give it to him. */
/* This information will include as much as we can find about */
/* SDP statistics, the alignments of the sends and receives */
/* and all that sort of rot... */
fprintf(where,
ksink_fmt,
local_send_align,
remote_recv_offset,
local_send_offset,
remote_recv_offset);
#ifdef WANT_HISTOGRAM
fprintf(where,"\nHistogram of request/response times\n");
fflush(where);
HIST_report(time_hist);
#endif /* WANT_HISTOGRAM */
}
}
/* this routine implements the receive (netserver) side of a SDP_RR */
/* test */
void
recv_sdp_rr()
{
struct ring_elt *send_ring;
struct ring_elt *recv_ring;
struct addrinfo *local_res;
char local_name[BUFSIZ];
char port_buffer[PORTBUFSIZE];
struct sockaddr_in myaddr_in,
peeraddr_in;
SOCKET s_listen,s_data;
netperf_socklen_t addrlen;
char *temp_message_ptr;
int trans_received;
int trans_remaining;
int bytes_sent;
int request_bytes_recvd;
int request_bytes_remaining;
int timed_out = 0;
int sock_closed = 0;
float elapsed_time;
struct sdp_rr_request_struct *sdp_rr_request;
struct sdp_rr_response_struct *sdp_rr_response;
struct sdp_rr_results_struct *sdp_rr_results;
sdp_rr_request =
(struct sdp_rr_request_struct *)netperf_request.content.test_specific_data;
sdp_rr_response =
(struct sdp_rr_response_struct *)netperf_response.content.test_specific_data;
sdp_rr_results =
(struct sdp_rr_results_struct *)netperf_response.content.test_specific_data;
if (debug) {
fprintf(where,"netserver: recv_sdp_rr: entered...\n");
fflush(where);
}
/* We want to set-up the listen socket with all the desired */
/* parameters and then let the initiator know that all is ready. If */
/* socket size defaults are to be used, then the initiator will have */
/* sent us 0's. If the socket sizes cannot be changed, then we will */
/* send-back what they are. If that information cannot be determined, */
/* then we send-back -1's for the sizes. If things go wrong for any */
/* reason, we will drop back ten yards and punt. */
/* If anything goes wrong, we want the remote to know about it. It */
/* would be best if the error that the remote reports to the user is */
/* the actual error we encountered, rather than some bogus unexpected */
/* response type message. */
if (debug) {
fprintf(where,"recv_sdp_rr: setting the response type...\n");
fflush(where);
}
netperf_response.content.response_type = SDP_RR_RESPONSE;
if (debug) {
fprintf(where,"recv_sdp_rr: the response type is set...\n");
fflush(where);
}
/* allocate the recv and send rings with the requested alignments */
/* and offsets. raj 7/94 */
if (debug) {
fprintf(where,"recv_sdp_rr: requested recv alignment of %d offset %d\n",
sdp_rr_request->recv_alignment,
sdp_rr_request->recv_offset);
fprintf(where,"recv_sdp_rr: requested send alignment of %d offset %d\n",
sdp_rr_request->send_alignment,
sdp_rr_request->send_offset);
fflush(where);
}
/* at some point, these need to come to us from the remote system */
if (send_width == 0) send_width = 1;
if (recv_width == 0) recv_width = 1;
send_ring = allocate_buffer_ring(send_width,
sdp_rr_request->response_size,
sdp_rr_request->send_alignment,
sdp_rr_request->send_offset);
recv_ring = allocate_buffer_ring(recv_width,
sdp_rr_request->request_size,
sdp_rr_request->recv_alignment,
sdp_rr_request->recv_offset);
/* Grab a socket to listen on, and then listen on it. */
if (debug) {
fprintf(where,"recv_sdp_rr: grabbing a socket...\n");
fflush(where);
}
/* create_data_socket expects to find some things in the global */
/* variables, so set the globals based on the values in the request. */
/* once the socket has been created, we will set the response values */
/* based on the updated value of those globals. raj 7/94 */
lss_size_req = sdp_rr_request->send_buf_size;
lsr_size_req = sdp_rr_request->recv_buf_size;
loc_nodelay = sdp_rr_request->no_delay;
loc_rcvavoid = sdp_rr_request->so_rcvavoid;
loc_sndavoid = sdp_rr_request->so_sndavoid;
set_hostname_and_port(local_name,
port_buffer,
nf_to_af(sdp_rr_request->ipfamily),
sdp_rr_request->port);
local_res = complete_addrinfo(local_name,
local_name,
port_buffer,
nf_to_af(sdp_rr_request->ipfamily),
SOCK_STREAM,
IPPROTO_TCP,
0);
/* fake things out by changing local_res->ai_family to AF_INET_SDP */
local_res->ai_family = AF_INET_SDP;
local_res->ai_protocol = 0;
s_listen = create_data_socket(local_res);
if (s_listen == INVALID_SOCKET) {
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
#ifdef WIN32
/* The test timer can fire during operations on the listening socket,
so to make the start_timer below work we have to move
it to close s_listen while we are blocked on accept. */
win_kludge_socket2 = s_listen;
#endif
/* Now, let's set-up the socket to listen for connections */
if (listen(s_listen, 5) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* now get the port number assigned by the system */
addrlen = sizeof(myaddr_in);
if (getsockname(s_listen,
(struct sockaddr *)&myaddr_in,
&addrlen) == SOCKET_ERROR) {
netperf_response.content.serv_errno = errno;
close(s_listen);
send_response();
exit(1);
}
/* Now myaddr_in contains the port and the internet address this is */
/* returned to the sender also implicitly telling the sender that the */
/* socket buffer sizing has been done. */
sdp_rr_response->data_port_number = (int) ntohs(myaddr_in.sin_port);
netperf_response.content.serv_errno = 0;
/* But wait, there's more. If the initiator wanted cpu measurements, */
/* then we must call the calibrate routine, which will return the max */
/* rate back to the initiator. If the CPU was not to be measured, or */
/* something went wrong with the calibration, we will return a 0.0 to */
/* the initiator. */
sdp_rr_response->cpu_rate = (float)0.0; /* assume no cpu */
sdp_rr_response->measure_cpu = 0;
if (sdp_rr_request->measure_cpu) {
sdp_rr_response->measure_cpu = 1;
sdp_rr_response->cpu_rate = calibrate_local_cpu(sdp_rr_request->cpu_rate);
}
/* before we send the response back to the initiator, pull some of */
/* the socket parms from the globals */
sdp_rr_response->send_buf_size = lss_size;
sdp_rr_response->recv_buf_size = lsr_size;
sdp_rr_response->no_delay = loc_nodelay;
sdp_rr_response->so_rcvavoid = loc_rcvavoid;
sdp_rr_response->so_sndavoid = loc_sndavoid;
sdp_rr_response->test_length = sdp_rr_request->test_length;
send_response();
addrlen = sizeof(peeraddr_in);
if ((s_data = accept(s_listen,
(struct sockaddr *)&peeraddr_in,
&addrlen)) == INVALID_SOCKET) {
/* Let's just punt. The remote will be given some information */
close(s_listen);
exit(1);
}
#ifdef KLUDGE_SOCKET_OPTIONS
/* this is for those systems which *INCORRECTLY* fail to pass */
/* attributes across an accept() call. Including this goes against */
/* my better judgement :( raj 11/95 */
kludge_socket_options(s_data);
#endif /* KLUDGE_SOCKET_OPTIONS */
#ifdef WIN32
/* this is used so the timer thread can close the socket out from */
/* under us, which to date is the easiest/cleanest/least */
/* Windows-specific way I can find to force the winsock calls to */
/* return WSAEINTR with the test is over. anything that will run on */
/* 95 and NT and is closer to what netperf expects from Unix signals */
/* and such would be appreciated raj 1/96 */
win_kludge_socket = s_data;
#endif /* WIN32 */
if (debug) {
fprintf(where,"recv_sdp_rr: accept completes on the data connection.\n");
fflush(where);
}
/* Now it's time to start receiving data on the connection. We will */
/* first grab the apropriate counters and then start grabbing. */
cpu_start(sdp_rr_request->measure_cpu);
/* The loop will exit when we hit the end of the test time, or when */
/* we have exchanged the requested number of transactions. */
if (sdp_rr_request->test_length > 0) {
times_up = 0;
trans_remaining = 0;
start_timer(sdp_rr_request->test_length + PAD_TIME);
}
else {
times_up = 1;
trans_remaining = sdp_rr_request->test_length * -1;
}
trans_received = 0;
while ((!times_up) || (trans_remaining > 0)) {
temp_message_ptr = recv_ring->buffer_ptr;
request_bytes_remaining = sdp_rr_request->request_size;
while(request_bytes_remaining > 0) {
if((request_bytes_recvd=recv(s_data,
temp_message_ptr,
request_bytes_remaining,
0)) == SOCKET_ERROR) {
if (SOCKET_EINTR(request_bytes_recvd))
{
timed_out = 1;
break;
}
netperf_response.content.serv_errno = errno;
send_response();
exit(1);
}
else if( request_bytes_recvd == 0 ) {
if (debug) {
fprintf(where,"zero is my hero\n");
fflush(where);
}
sock_closed = 1;
break;
}
else {
request_bytes_remaining -= request_bytes_recvd;
temp_message_ptr += request_bytes_recvd;
}
}
recv_ring = recv_ring->next;
if ((timed_out) || (sock_closed)) {
/* we hit the end of the test based on time - or the socket
closed on us along the way. bail out of here now... */
if (debug) {
fprintf(where,"yo5\n");
fflush(where);
}
break;
}
/* Now, send the response to the remote */
if((bytes_sent=send(s_data,
send_ring->buffer_ptr,
sdp_rr_request->response_size,
0)) == SOCKET_ERROR) {
if (SOCKET_EINTR(bytes_sent)) {
/* the test timer has popped */
timed_out = 1;
fprintf(where,"yo6\n");
fflush(where);
break;
}
netperf_response.content.serv_errno = 992;
send_response();
exit(1);
}
send_ring = send_ring->next;
trans_received++;
if (trans_remaining) {
trans_remaining--;
}
}
/* The loop now exits due to timeout or transaction count being */
/* reached */
cpu_stop(sdp_rr_request->measure_cpu,&elapsed_time);
stop_timer();
if (timed_out) {
/* we ended the test by time, which was at least 2 seconds */
/* longer than we wanted to run. so, we want to subtract */
/* PAD_TIME from the elapsed_time. */
elapsed_time -= PAD_TIME;
}
/* send the results to the sender */
if (debug) {
fprintf(where,
"recv_sdp_rr: got %d transactions\n",
trans_received);
fflush(where);
}
sdp_rr_results->bytes_received = (trans_received *
(sdp_rr_request->request_size +
sdp_rr_request->response_size));
sdp_rr_results->trans_received = trans_received;
sdp_rr_results->elapsed_time = elapsed_time;
sdp_rr_results->cpu_method = cpu_method;
sdp_rr_results->num_cpus = lib_num_loc_cpus;
if (sdp_rr_request->measure_cpu) {
sdp_rr_results->cpu_util = calc_cpu_util(elapsed_time);
}
if (debug) {
fprintf(where,
"recv_sdp_rr: test complete, sending results.\n");
fflush(where);
}
/* we are now done with the sockets */
close(s_data);
close(s_listen);
send_response();
}
void
print_sdp_usage()
{
printf("%s",sdp_usage);
exit(1);
}
void
scan_sdp_args(argc, argv)
int argc;
char *argv[];
{
#define SOCKETS_ARGS "b:DhH:I:L:m:M:P:r:s:S:V46"
extern char *optarg; /* pointer to option string */
int c;
char
arg1[BUFSIZ], /* argument holders */
arg2[BUFSIZ];
if (no_control) {
fprintf(where,
"The SDP tests do not know how to deal with no control tests\n");
exit(-1);
}
strncpy(local_data_port,"0",sizeof(local_data_port));
strncpy(remote_data_port,"0",sizeof(remote_data_port));
/* Go through all the command line arguments and break them */
/* out. For those options that take two parms, specifying only */
/* the first will set both to that value. Specifying only the */
/* second will leave the first untouched. To change only the */
/* first, use the form "first," (see the routine break_args.. */
while ((c= getopt(argc, argv, SOCKETS_ARGS)) != EOF) {
switch (c) {
case '?':
case '4':
remote_data_family = AF_INET;
local_data_family = AF_INET;
break;
case '6':
#if defined(AF_INET6)
remote_data_family = AF_INET6;
local_data_family = AF_INET6;
#else
fprintf(stderr,
"This netperf was not compiled on an IPv6 capable host!\n");
fflush(stderr);
exit(-1);
#endif
break;
case 'h':
print_sdp_usage();
exit(1);
case 'b':
#ifdef WANT_FIRST_BURST
first_burst_size = atoi(optarg);
#else /* WANT_FIRST_BURST */
printf("Initial request burst functionality not compiled-in!\n");
#endif /* WANT_FIRST_BURST */
break;
case 'D':
/* set the nodelay flag */
loc_nodelay = 1;
rem_nodelay = 1;
break;
case 'H':
break_args_explicit(optarg,arg1,arg2);
if (arg1[0]) {
/* make sure we leave room for the NULL termination boys and
girls. raj 2005-02-82 */
remote_data_address = malloc(strlen(arg1)+1);
strncpy(remote_data_address,arg1,strlen(arg1));
}
if (arg2[0])
remote_data_family = parse_address_family(arg2);
break;
case 'L':
break_args_explicit(optarg,arg1,arg2);
if (arg1[0]) {
/* make sure we leave room for the NULL termination boys and
girls. raj 2005-02-82 */
local_data_address = malloc(strlen(arg1)+1);
strncpy(local_data_address,arg1,strlen(arg1));
}
if (arg2[0])
local_data_family = parse_address_family(arg2);
break;
case 'P':
/* set the local and remote data port numbers for the tests to
allow them to run through those blankety blank end-to-end
breaking firewalls. raj 2004-06-15 */
break_args(optarg,arg1,arg2);
if (arg1[0])
strncpy(local_data_port,arg1,sizeof(local_data_port));
if (arg2[0])
strncpy(remote_data_port,arg2,sizeof(remote_data_port));
break;
case 's':
/* set local socket sizes */
break_args(optarg,arg1,arg2);
if (arg1[0])
lss_size_req = convert(arg1);
if (arg2[0])
lsr_size_req = convert(arg2);
break;
case 'S':
/* set remote socket sizes */
break_args(optarg,arg1,arg2);
if (arg1[0])
rss_size_req = convert(arg1);
if (arg2[0])
rsr_size_req = convert(arg2);
break;
case 'r':
/* set the request/response sizes */
break_args(optarg,arg1,arg2);
if (arg1[0])
req_size = convert(arg1);
if (arg2[0])
rsp_size = convert(arg2);
break;
case 'm':
/* set size of the buffer for each sent message */
send_size = convert(optarg);
break;
case 'M':
/* set the size of the buffer for each received message */
recv_size = convert(optarg);
break;
case 't':
/* set the test name */
strcpy(test_name,optarg);
break;
case 'W':
/* set the "width" of the user space data */
/* buffer. This will be the number of */
/* send_size buffers malloc'd in the */
/* *_STREAM test. It may be enhanced to set */
/* both send and receive "widths" but for now */
/* it is just the sending *_STREAM. */
send_width = convert(optarg);
break;
case 'V':
/* we want to do copy avoidance and will set */
/* it for everything, everywhere, if we really */
/* can. of course, we don't know anything */
/* about the remote... */
#ifdef SO_SND_COPYAVOID
loc_sndavoid = 1;
#else
loc_sndavoid = 0;
printf("Local send copy avoidance not available.\n");
#endif
#ifdef SO_RCV_COPYAVOID
loc_rcvavoid = 1;
#else
loc_rcvavoid = 0;
printf("Local recv copy avoidance not available.\n");
#endif
rem_sndavoid = 1;
rem_rcvavoid = 1;
break;
case 'N':
/* this opton allows the user to set the number of
* messages to send. This in effect modifies the test
* time. If we know the message size, then the we can
* express the test time as message_size * number_messages
*/
msg_count = convert (optarg);
if (msg_count > 0)
test_time = 0;
break;
case 'B':
non_block = 1;
break;
case 'T':
num_associations = atoi(optarg);
if (num_associations <= 1) {
printf("Number of SDP associations must be >= 1\n");
exit(1);
}
break;
};
}
}
#endif /* WANT_SDP */