| /* |
| * dselect - Debian package maintenance user interface |
| * helpmsgs.cc - list of help messages |
| * |
| * Copyright © 1995 Ian Jackson <ian@chiark.greenend.org.uk> |
| * |
| * This is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <config.h> |
| #include <compat.h> |
| |
| #include <dpkg/i18n.h> |
| |
| #include "helpmsgs.h" |
| |
| const struct helpmessage hlp_listkeys = { |
| N_("Keystrokes"), N_("\ |
| Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n\ |
| j, Down-arrow k, Up-arrow move highlight\n\ |
| N, Page-down, Space P, Page-up, Backspace scroll list by 1 page\n\ |
| ^n ^p scroll list by 1 line\n\ |
| t, Home e, End jump to top/end of list\n\ |
| u d scroll info by 1 page\n\ |
| ^u ^d scroll info by 1 line\n\ |
| B, Left-arrow F, Right-arrow pan display by 1/3 screen\n\ |
| ^b ^f pan display by 1 character\n\n\ |
| \ |
| Mark packages for later processing:\n\ |
| +, Insert install or upgrade =, H hold in present state\n\ |
| -, Delete remove :, G unhold: upgrade or leave uninstalled\n\ |
| _ remove & purge config\n\ |
| Miscellaneous:\n\ |
| Quit, exit, overwrite (note capitals!): ?, F1 request help (also Help)\n\ |
| Return Confirm, quit (check dependencies) i, I toggle/cycle info displays\n\ |
| Q Confirm, quit (override dep.s) o, O cycle through sort options\n\ |
| X, Esc eXit, abandoning any changes made v, V change status display opts\n\ |
| R Revert to state before this list ^l redraw display\n\ |
| U set all to sUggested state / search (Return to cancel)\n\ |
| D set all to Directly requested state n, \\ repeat last search\n") |
| }; |
| |
| const struct helpmessage hlp_mainintro = { |
| N_("Introduction to package selections"), N_("\ |
| Welcome to dselect's main package listing.\n\n\ |
| \ |
| You will be presented with a list of packages which are installed or available\n\ |
| for installation. You can navigate around the list using the cursor keys,\n\ |
| mark packages for installation (using `+') or deinstallation (using `-').\n\ |
| Packages can be marked either singly or in groups; initially you will see that\n\ |
| the line `All packages' is selected. `+', `-' and so on will affect all the\n\ |
| packages described by the highlighted line.\n\n\ |
| \ |
| Some of your choices will cause conflicts or dependency problems; you will be\n\ |
| given a sub-list of the relevant packages, so that you can solve the problems.\n\n\ |
| \ |
| You should read the list of keys and the explanations of the display.\n\ |
| Much on-line help is available, please make use of it - press `?' at\n\ |
| any time for help.\n\n\ |
| \ |
| When you have finished selecting packages, press <enter> to confirm changes,\n\ |
| or `X' to quit without saving changes. A final check on conflicts and\n\ |
| dependencies will be done - here too you may see a sublist.\n\n\ |
| \ |
| Press <space> to leave help and enter the list now.\n") |
| }; |
| |
| const struct helpmessage hlp_readonlyintro = { |
| N_("Introduction to read-only package list browser"), N_("\ |
| Welcome to dselect's main package listing.\n\n\ |
| \ |
| You will be presented with a list of packages which are installed or available\n\ |
| for installation. Since you do not have the privilege necessary to update\n\ |
| package states, you are in a read-only mode. You can navigate around the\n\ |
| list using the cursor keys (please see the `Keystrokes' help screen), observe\n\ |
| the status of the packages and read information about them.\n\n\ |
| \ |
| You should read the list of keys and the explanations of the display.\n\ |
| Much on-line help is available, please make use of it - press `?' at\n\ |
| any time for help.\n\n\ |
| \ |
| When you have finished browsing, press `Q' or <enter> to quit.\n\n\ |
| \ |
| Press <space> to leave help and enter the list now.\n") |
| }; |
| |
| const struct helpmessage hlp_recurintro = { |
| N_("Introduction to conflict/dependency resolution sub-list"), N_("\ |
| Dependency/conflict resolution - introduction.\n\n\ |
| \ |
| One or more of your choices have raised a conflict or dependency problem -\n\ |
| some packages should only be installed in conjunction with certain others, and\n\ |
| some combinations of packages may not be installed together.\n\n\ |
| \ |
| You will see a sub-list containing the packages involved. The bottom half of\n\ |
| the display shows relevant conflicts and dependencies; use `i' to cycle between\n\ |
| that, the package descriptions and the internal control information.\n\n\ |
| \ |
| A set of `suggested' packages has been calculated, and the initial markings in\n\ |
| this sub-list have been set to match those, so you can just hit Return to\n\ |
| accept the suggestions if you wish. You may abort the change(s) which caused\n\ |
| the problem(s), and go back to the main list, by pressing capital `X'.\n\n\ |
| \ |
| You can also move around the list and change the markings so that they are more\n\ |
| like what you want, and you can `reject' my suggestions by using the capital\n\ |
| `D' or `R' keys (see the keybindings help screen). You can use capital `Q' to\n\ |
| force me to accept the situation currently displayed, in case you want to\n\ |
| override a recommendation or think that the program is mistaken.\n\n\ |
| \ |
| Press <space> to leave help and enter the sub-list; remember: press `?' for help.\n") |
| }; |
| |
| const struct helpmessage hlp_displayexplain1 = { |
| N_("Display, part 1: package listing and status chars"), N_("\ |
| The top half of the screen shows a list of packages. For each package you see\n\ |
| four columns for its current status on the system and mark. In terse mode (use\n\ |
| `v' to toggle verbose display) these are single characters, from left to right:\n\n\ |
| \ |
| Error flag: Space - no error (but package may be in broken state - see below)\n\ |
| `R' - serious error during installation, needs reinstallation;\n\ |
| Installed state: Space - not installed;\n\ |
| `*' - installed;\n\ |
| `-' - not installed but config files remain;\n\ |
| packages in these { `U' - unpacked but not yet configured;\n\ |
| states are not { `C' - half-configured (an error happened);\n\ |
| (quite) properly { `I' - half-installed (an error happened);\n\ |
| installed { `W',`t' - triggers are awaited resp. pending.\n\ |
| Old mark: what was requested for this package before presenting this list;\n\ |
| Mark: what is requested for this package:\n\ |
| `*': marked for installation or upgrade;\n\ |
| `-': marked for removal, but any configuration files will remain;\n\ |
| `=': on hold: package will not be processed at all;\n\ |
| `_': marked for purge completely - even remove configuration;\n\ |
| `n': package is new and has yet to be marked for install/remove/&c.\n\n\ |
| \ |
| Also displayed are each package's Priority, Section, name, installed and\n\ |
| available version numbers (shift-V to display/hide) and summary description.\n") |
| }; |
| |
| const struct helpmessage hlp_displayexplain2 = { |
| N_("Display, part 2: list highlight; information display"), N_("\ |
| * Highlight: One line in the package list will be highlighted. It indicates\n\ |
| which package(s) will be affected by presses of `+', `-' and `_'.\n\n\ |
| \ |
| * The dividing line in the middle of the screen shows a brief explanation of\n\ |
| the status of the currently-highlighted package, or a description of which\n\ |
| group is highlighted if a group line is. If you don't understand the\n\ |
| meaning of some of the status characters displayed, go to the relevant\n\ |
| package and look at this divider line, or use the `v' key for a verbose\n\ |
| display (press `v' again to go back to the terse display).\n\n\ |
| \ |
| * The bottom of the screen shows more information about the\n\ |
| currently-highlighted package (if there is only one).\n\n\ |
| \ |
| It can show an extended description of the package, the internal package\n\ |
| control details (either for the installed or available version of the\n\ |
| package), or information about conflicts and dependencies involving the\n\ |
| current package (in conflict/dependency resolution sublists).\n\n\ |
| \ |
| Use the `i' key to cycle through the displays, and `I' to hide the\n\ |
| information display or expand it to use almost all of the screen.\n") |
| }; |
| |
| const struct helpmessage hlp_methintro = { |
| N_("Introduction to method selection display"), N_("\ |
| dselect and dpkg can do automatic installation, loading the package files to be\n\ |
| installed from one of a number of different possible places.\n\n\ |
| \ |
| This list allows you to select one of these installation methods.\n\n\ |
| \ |
| Move the highlight to the method you wish to use, and hit Enter. You will then\n\ |
| be prompted for the information required to do the installation.\n\n\ |
| \ |
| As you move the highlight a description of each method, where available, is\n\ |
| displayed in the bottom half of the screen.\n\n\ |
| \ |
| If you wish to quit without changing anything use the `x' key while in the list\n\ |
| of installation methods.\n\n\ |
| \ |
| A full list of keystrokes is available by pressing `k' now, or from the help\n\ |
| menu reachable by pressing `?'.\n") |
| }; |
| |
| const struct helpmessage hlp_methkeys = { |
| N_("Keystrokes for method selection"), N_("\ |
| Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n\ |
| j, Down-arrow k, Up-arrow move highlight\n\ |
| N, Page-down, Space P, Page-up, Backspace scroll list by 1 page\n\ |
| ^n ^p scroll list by 1 line\n\ |
| t, Home e, End jump to top/end of list\n\ |
| u d scroll info by 1 page\n\ |
| ^u ^d scroll info by 1 line\n\ |
| B, Left-arrow F, Right-arrow pan display by 1/3 screen\n\ |
| ^b ^f pan display by 1 character\n\ |
| (These are the same motion keys as in the package list display.)\n\n\ |
| \ |
| Quit:\n\ |
| Return, Enter select this method and go to its configuration dialogue\n\ |
| x, X exit without changing or setting up the installation method\n\n\ |
| \ |
| Miscellaneous:\n\ |
| ?, Help, F1 request help\n\ |
| ^l redraw display\n\ |
| / search (just return to cancel)\n\ |
| \\ repeat last search\n") |
| }; |
