blob: fcb2c178b9e1348197b9354713914928d913fb7f [file] [log] [blame]
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# vim:set syn=automake:
# Variables to be defined:
#
# TEST_VERBOSE - set to 0 or 1 to control test suite verbosity
# TEST_ENV_VARS - environment variables to be set for the test suite
# TEST_COVERAGE - set to the perl module in charge of getting test coverage
# test_tmpdir - test suite temporary directory
# test_cases - list of test case files
# test_data - list of test data files
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(nobase_dist_perllib_DATA) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/Makecheck.am
subdir = scripts
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
$(top_srcdir)/m4/dpkg-build.m4 \
$(top_srcdir)/m4/dpkg-compiler.m4 \
$(top_srcdir)/m4/dpkg-coverage.m4 \
$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
$(top_srcdir)/m4/dpkg-types.m4 \
$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(changelogdir)" \
"$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)"
SCRIPTS = $(bin_SCRIPTS) $(changelog_SCRIPTS)
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(man3_MANS)
DATA = $(nobase_dist_perllib_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BZ2_LIBS = @BZ2_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURSES_LIBS = @CURSES_LIBS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GCOV = @GCOV@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
HAVE_DOT = @HAVE_DOT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LCOV = @LCOV@
LCOV_GENHTML = @LCOV_GENHTML@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_COVER = @PERL_COVER@
PERL_COVERAGE = @PERL_COVERAGE@
PERL_LIBDIR = @PERL_LIBDIR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PO4A = @PO4A@
POD2MAN = @POD2MAN@
POSUB = @POSUB@
RANLIB = @RANLIB@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSD_LIBS = @SSD_LIBS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
USE_PO4A = @USE_PO4A@
USE_UNICODE = @USE_UNICODE@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
admindir = @admindir@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
logdir = @logdir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = mk po
bin_SCRIPTS = \
dpkg-architecture \
dpkg-buildflags \
dpkg-buildpackage \
dpkg-checkbuilddeps \
dpkg-distaddfile \
dpkg-genchanges \
dpkg-gencontrol \
dpkg-gensymbols \
dpkg-maintscript-helper \
dpkg-mergechangelogs \
dpkg-name \
dpkg-parsechangelog \
dpkg-scanpackages \
dpkg-scansources \
dpkg-shlibdeps \
dpkg-source \
dpkg-vendor
changelogdir = $(pkglibdir)/parsechangelog
changelog_SCRIPTS = \
changelog/debian
EXTRA_DIST = \
dpkg-architecture.pl \
dpkg-buildflags.pl \
dpkg-buildpackage.pl \
dpkg-checkbuilddeps.pl \
dpkg-distaddfile.pl \
dpkg-genchanges.pl \
dpkg-gencontrol.pl \
dpkg-gensymbols.pl \
dpkg-maintscript-helper.sh \
dpkg-mergechangelogs.pl \
dpkg-name.pl \
dpkg-parsechangelog.pl \
dpkg-scanpackages.pl \
dpkg-scansources.pl \
dpkg-shlibdeps.pl \
dpkg-source.pl \
dpkg-vendor.pl \
changelog/debian.pl \
$(test_cases) \
$(test_data)
CLEANFILES = \
$(bin_SCRIPTS) $(changelog_SCRIPTS)
perllibdir = $(PERL_LIBDIR)
nobase_dist_perllib_DATA = \
Dpkg/Arch.pm \
Dpkg/BuildFlags.pm \
Dpkg/BuildOptions.pm \
Dpkg/Changelog.pm \
Dpkg/Changelog/Debian.pm \
Dpkg/Changelog/Entry.pm \
Dpkg/Changelog/Entry/Debian.pm \
Dpkg/Changelog/Parse.pm \
Dpkg/Checksums.pm \
Dpkg/Compression.pm \
Dpkg/Compression/FileHandle.pm \
Dpkg/Compression/Process.pm \
Dpkg/Conf.pm \
Dpkg/Control.pm \
Dpkg/Control/Changelog.pm \
Dpkg/Control/Fields.pm \
Dpkg/Control/Info.pm \
Dpkg/Control/Hash.pm \
Dpkg/Control/Types.pm \
Dpkg/Deps.pm \
Dpkg/ErrorHandling.pm \
Dpkg/Exit.pm \
Dpkg/Gettext.pm \
Dpkg/Index.pm \
Dpkg/Interface/Storable.pm \
Dpkg/IPC.pm \
Dpkg/Path.pm \
Dpkg/Shlibs.pm \
Dpkg/Shlibs/Objdump.pm \
Dpkg/Shlibs/Symbol.pm \
Dpkg/Shlibs/SymbolFile.pm \
Dpkg/Shlibs/Cppfilt.pm \
Dpkg/Source/Archive.pm \
Dpkg/Source/Functions.pm \
Dpkg/Source/Package.pm \
Dpkg/Source/Package/V1.pm \
Dpkg/Source/Package/V2.pm \
Dpkg/Source/Package/V3/bzr.pm \
Dpkg/Source/Package/V3/custom.pm \
Dpkg/Source/Package/V3/native.pm \
Dpkg/Source/Package/V3/git.pm \
Dpkg/Source/Package/V3/quilt.pm \
Dpkg/Source/Patch.pm \
Dpkg/Substvars.pm \
Dpkg/Vars.pm \
Dpkg/Vendor.pm \
Dpkg/Vendor/Debian.pm \
Dpkg/Vendor/Default.pm \
Dpkg/Vendor/Ubuntu.pm \
Dpkg/Version.pm \
Dpkg.pm
# Keep it even if empty to have man3dir correctly set
man3_MANS =
do_perl_subst = $(AM_V_GEN) \
sed -e "s:^\#![:space:]*/usr/bin/perl:\#!$(PERL):" \
-e "s:\$$dpkglibdir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$dpkglibdir=\"$(pkglibdir)\":" \
-e "s:\$$pkgdatadir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$pkgdatadir=\"$(pkgdatadir)\":" \
-e "s:\$$admindir[[:space:]]*=[[:space:]]*['\"][^'\"]*['\"]:\$$admindir=\"$(admindir)\":" \
-e "s:\$$version[[:space:]]*=[[:space:]]*['\"][^'\"]*[\"']:\$$version=\"$(PACKAGE_VERSION)\":"
do_shell_subst = $(AM_V_GEN) \
sed -e "s:^version[[:space:]]*=[[:space:]]*['\"][^'\"]*[\"']:version=\"$(PACKAGE_VERSION)\":"
TEST_VERBOSE = 0
TEST_ENV_VARS = \
DPKG_DATADIR=$(srcdir)/.. \
DPKG_ORIGINS_DIR=$(srcdir)/t/origins
TEST_COVERAGE = $(PERL_COVERAGE)
test_tmpdir = t.tmp
test_cases = \
t/000_pod.t \
t/100_Dpkg_Version.t \
t/190_Dpkg_Shlibs_Cppfilt.t \
t/200_Dpkg_Shlibs.t \
t/300_Dpkg_BuildOptions.t \
t/400_Dpkg_Deps.t \
t/500_Dpkg_Path.t \
t/600_Dpkg_Changelog.t \
t/600_Dpkg_Changelog_Ubuntu.t \
t/700_Dpkg_Control.t \
t/750_Dpkg_Substvars.t \
t/800_Dpkg_IPC.t \
t/850_Dpkg_Compression.t \
t/910_merge_changelogs.t
check_DATA = \
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-amd64 \
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-i386 \
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.patterns
test_data = \
t/200_Dpkg_Shlibs/symbols.fake-1 \
t/200_Dpkg_Shlibs/symbols.fake-2 \
t/200_Dpkg_Shlibs/symbols.fake-3 \
t/200_Dpkg_Shlibs/symbols.include-1 \
t/200_Dpkg_Shlibs/symbols.include-2 \
t/200_Dpkg_Shlibs/symbols.include-3 \
t/200_Dpkg_Shlibs/basictags.symbols \
t/200_Dpkg_Shlibs/basictags.c \
t/200_Dpkg_Shlibs/patterns.symbols \
t/200_Dpkg_Shlibs/patterns.cpp \
t/200_Dpkg_Shlibs/patterns.map \
t/200_Dpkg_Shlibs/ld.so.conf \
t/200_Dpkg_Shlibs/ld.so.conf_2 \
t/200_Dpkg_Shlibs/ld.so.conf.d/normal.conf \
t/200_Dpkg_Shlibs/ld.so.conf.d/inf_recurse.conf \
t/200_Dpkg_Shlibs/ld.so.conf.d/recursive.conf \
t/200_Dpkg_Shlibs/objdump.glib-ia64 \
t/200_Dpkg_Shlibs/objdump.libc6-2.3 \
t/200_Dpkg_Shlibs/objdump.libc6-2.6 \
t/200_Dpkg_Shlibs/objdump.dbd-pg \
t/200_Dpkg_Shlibs/objdump.ls \
t/600_Dpkg_Changelog/countme \
t/600_Dpkg_Changelog/fields \
t/600_Dpkg_Changelog/misplaced-tz \
t/600_Dpkg_Changelog/regressions \
t/600_Dpkg_Changelog/shadow \
t/700_Dpkg_Control/control-1 \
t/750_Dpkg_Substvars/substvars1 \
t/910_merge_changelogs/ch-old \
t/910_merge_changelogs/ch-a \
t/910_merge_changelogs/ch-b \
t/910_merge_changelogs/ch-merged \
t/910_merge_changelogs/ch-merged-basic \
t/910_merge_changelogs/ch-merged-pr \
t/910_merge_changelogs/ch-merged-pr-basic \
t/origins/debian \
t/origins/default \
t/origins/ubuntu
objdump_lib_name = lib`basename $@`.so
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Makecheck.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign scripts/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
install-changelogSCRIPTS: $(changelog_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(changelogdir)" || $(MKDIR_P) "$(DESTDIR)$(changelogdir)"
@list='$(changelog_SCRIPTS)'; test -n "$(changelogdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(changelogdir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(changelogdir)$$dir" || exit $$?; \
} \
; done
uninstall-changelogSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(changelog_SCRIPTS)'; test -n "$(changelogdir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(changelogdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(changelogdir)" && rm -f $$files
install-man3: $(man3_MANS)
@$(NORMAL_INSTALL)
test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
{ for i in $$list; do echo "$$i"; done; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
done; }
uninstall-man3:
@$(NORMAL_UNINSTALL)
@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
test -z "$$files" || { \
echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
@$(NORMAL_INSTALL)
test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
$(am__nobase_list) | while read dir files; do \
xfiles=; for file in $$files; do \
if test -f "$$file"; then xfiles="$$xfiles $$file"; \
else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
test -z "$$xfiles" || { \
test "x$$dir" = x. || { \
echo "$(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
$(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
$(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
done
uninstall-nobase_dist_perllibDATA:
@$(NORMAL_UNINSTALL)
@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(perllibdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(perllibdir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@list='$(MANS)'; if test -n "$$list"; then \
list=`for p in $$list; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
if test -n "$$list" && \
grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
echo " typically \`make maintainer-clean' will remove them" >&2; \
exit 1; \
else :; fi; \
else :; fi
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_DATA)
$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(changelogdir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-changelogSCRIPTS install-data-local \
install-man install-nobase_dist_perllibDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-binSCRIPTS
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man: install-man3
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-changelogSCRIPTS \
uninstall-local uninstall-man \
uninstall-nobase_dist_perllibDATA
uninstall-man: uninstall-man3
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
ctags-recursive install-am install-data-am install-strip \
tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am check-local clean clean-generic \
clean-local ctags ctags-recursive distclean distclean-generic \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-binSCRIPTS install-changelogSCRIPTS \
install-data install-data-am install-data-hook \
install-data-local install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man3 \
install-nobase_dist_perllibDATA install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-binSCRIPTS uninstall-changelogSCRIPTS \
uninstall-local uninstall-man uninstall-man3 \
uninstall-nobase_dist_perllibDATA
%: %.pl Makefile
@test -d `dirname $@` || $(mkdir_p) `dirname $@`
$(do_perl_subst) <$< >$@
$(AM_V_at) chmod +x $@
%: %.sh Makefile
@test -d `dirname $@` || $(mkdir_p) `dirname $@`
$(do_shell_subst) <$< >$@
$(AM_V_at) chmod +x $@
install-data-local:
# Install manual pages for perl modules manually as make can't deal
# properly with filenames containing colons
# Remove empty manual pages (perl modules not documented)
@BUILD_POD_DOC_TRUE@ $(mkdir_p) $(DESTDIR)$(man3dir)
@BUILD_POD_DOC_TRUE@ for module in $(nobase_dist_perllib_DATA); do \
@BUILD_POD_DOC_TRUE@ name=`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$//'`; \
@BUILD_POD_DOC_TRUE@ pod2man --utf8 --center=libdpkg-perl --release=$(VERSION) \
@BUILD_POD_DOC_TRUE@ --name="$$name" --section=3 $(srcdir)/$$module \
@BUILD_POD_DOC_TRUE@ >$(DESTDIR)$(man3dir)/$$name.3; \
@BUILD_POD_DOC_TRUE@ test -s $(DESTDIR)$(man3dir)/$$name.3 || \
@BUILD_POD_DOC_TRUE@ rm -f $(DESTDIR)$(man3dir)/$$name.3; \
@BUILD_POD_DOC_TRUE@ done
# Ideally we'd use 'sed -i', but unfortunately that's not portable.
install-data-hook:
cp -p $(DESTDIR)$(perllibdir)/Dpkg.pm \
$(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
$(do_perl_subst) <$(DESTDIR)$(perllibdir)/Dpkg.pm.tmp \
>$(DESTDIR)$(perllibdir)/Dpkg.pm
rm $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
uninstall-local:
@BUILD_POD_DOC_TRUE@ for module in $(nobase_dist_perllib_DATA); do \
@BUILD_POD_DOC_TRUE@ rm -f $(DESTDIR)$(man3dir)/`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$/.3/'`; \
@BUILD_POD_DOC_TRUE@ done
coverage: check
$(PERL_COVER) -silent \
-ignore_re '^t/.*\.t' \
-outputdir $(top_builddir)/doc/coverage/scripts
coverage-clean:
rm -rf cover_db
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-amd64 $(test_tmpdir)/200_Dpkg_Shlibs/objdump.basictags-i386: $(srcdir)/t/200_Dpkg_Shlibs/basictags.c
$(mkdir_p) $(test_tmpdir)/200_Dpkg_Shlibs
$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
$(if $(findstring amd64,$@),-DAMD64,) -o $(objdump_lib_name)
objdump -w -f -p -T -R $(objdump_lib_name) | \
sed "s/$(objdump_lib_name)/libbasictags.so.1/g" > $@
rm -f $(objdump_lib_name)
$(test_tmpdir)/200_Dpkg_Shlibs/objdump.patterns: $(srcdir)/t/200_Dpkg_Shlibs/patterns.cpp $(srcdir)/t/200_Dpkg_Shlibs/patterns.map
$(mkdir_p) $(test_tmpdir)/200_Dpkg_Shlibs
$(CXX) $(CXXFLAGS) -shared -fPIC -Wl,-soname -Wl,libpatterns.so.1 \
-Wl,--version-script=$(srcdir)/t/200_Dpkg_Shlibs/patterns.map $< \
-o $(objdump_lib_name)
objdump -w -f -p -T -R $(objdump_lib_name) | \
sed "s/$(objdump_lib_name)/libpatterns.so.1/g" > $@
rm -f $(objdump_lib_name)
check-clean:
rm -fr $(test_tmpdir)
check-local: $(test_data) $(test_cases)
$(mkdir_p) $(test_tmpdir)
PATH="$(top_builddir)/src:$(top_builddir)/scripts:$(top_builddir)/utils:$(PATH)" \
LC_ALL=C \
$(TEST_ENV_VARS) \
srcdir=$(srcdir) builddir=$(builddir) \
PERL5LIB=$(top_srcdir)/scripts PERL_DL_NONLAZY=1 \
PERL5OPT=$(TEST_COVERAGE) \
$(PERL) -I$(top_srcdir)/scripts \
-MExtUtils::Command::MM -e "test_harness($(TEST_VERBOSE), '.')" \
$(addprefix $(srcdir)/,$(test_cases))
clean-local: check-clean coverage-clean
rm -fr man
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: